-- ***************************************************************** -- MY-MULTICAST-MIB.mib: My Multicast MIB file -- -- $Copyright$ -- -- ***************************************************************** MY-MULTICAST-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Counter32, Gauge32, Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI RowStatus, DisplayString,TruthValue FROM SNMPv2-TC myMgmt FROM MY-SMI InterfaceIndex FROM IF-MIB VlanId FROM Q-BRIDGE-MIB IfIndex FROM MY-TC IANAipRouteProtocol,IANAipMRouteProtocol FROM IANA-RTPROTO-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; myMultMIB MODULE-IDENTITY LAST-UPDATED "200301200000Z" ORGANIZATION "$Company$" CONTACT-INFO " Tel: $Telephone$ E-mail: $E-mail$" DESCRIPTION "This module defines my multicast mibs." REVISION "200301200000Z" DESCRIPTION "Initial version of this MIB module." ::= { myMgmt 28} myMultMIBObjects OBJECT IDENTIFIER ::= { myMultMIB 1 } myIpMRouteInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF MyIpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information specific to interfaces." ::= { myMultMIBObjects 1 } myIpMRouteInterfaceEntry OBJECT-TYPE SYNTAX MyIpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for a particular interface." INDEX { myIpMRouteInterfaceIfIndex } ::= { myIpMRouteInterfaceTable 1 } MyIpMRouteInterfaceEntry ::= SEQUENCE { myIpMRouteInterfaceIfIndex InterfaceIndex, myIpMRouteInterfaceTtl Integer32, myIpMRouteInterfaceProtocol IANAipMRouteProtocol, myIpMRouteInterfaceRateLimit Integer32, myIpMRouteInterfaceInMcastOctets Counter32, myIpMRouteInterfaceOutMcastOctets Counter32, myIpMRouteInterfaceHCInMcastOctets Counter64, myIpMRouteInterfaceHCOutMcastOctets Counter64, myIpMRouteBoundaryAclName DisplayString } myIpMRouteInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface for which this entry contains information." ::= { myIpMRouteInterfaceEntry 1 } myIpMRouteInterfaceTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." DEFVAL { 0 } ::= { myIpMRouteInterfaceEntry 2 } myIpMRouteInterfaceProtocol OBJECT-TYPE SYNTAX IANAipMRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing protocol running on this interface." ::= { myIpMRouteInterfaceEntry 3 } myIpMRouteInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." DEFVAL { 0 } ::= { myIpMRouteInterfaceEntry 4 } myIpMRouteInterfaceInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { myIpMRouteInterfaceEntry 5 } myIpMRouteInterfaceOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface." ::= { myIpMRouteInterfaceEntry 6 } myIpMRouteInterfaceHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of ipMRouteInterfaceInMcastOctets. It is similar to ifHCInOctets in the Interfaces MIB, except that only multicast packets are counted." ::= { myIpMRouteInterfaceEntry 7 } myIpMRouteInterfaceHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of ipMRouteInterfaceOutMcastOctets." ::= { myIpMRouteInterfaceEntry 8 } myIpMRouteBoundaryAclName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of an access list." ::= { myIpMRouteInterfaceEntry 9 } myIpRpfTable OBJECT-TYPE SYNTAX SEQUENCE OF MyIpRpfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's scoped multicast address boundaries." ::= { myMultMIBObjects 2 } myIpRpfEntry OBJECT-TYPE SYNTAX MyIpRpfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the starIpRpfTable representing a scoped boundary." INDEX { myIpRpfSourceAddress} ::= { myIpRpfTable 1 } MyIpRpfEntry ::= SEQUENCE { myIpRpfSourceAddress IpAddress, myIpRpfInterface InterfaceIndex, myIpRpfNeighborAddress IpAddress, myIpRpfRouteAddress IpAddress, myIpRpfRouteMask IpAddress, myIpRpfType Integer32 } myIpRpfSourceAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "source address that this information concerns." ::= { myIpRpfEntry 1 } myIpRpfInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "For the given source, interface from which the router expects to get packets." ::= { myIpRpfEntry 2 } myIpRpfNeighborAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For given source, neighbor from which the router expects to get packets." ::= { myIpRpfEntry 3 } myIpRpfRouteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Route address and mask that matched against this source." ::= { myIpRpfEntry 4 } myIpRpfRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Route address and mask that matched against this source." ::= { myIpRpfEntry 5 } myIpRpfType OBJECT-TYPE SYNTAX Integer32{unicast(1),dvmrp(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Routing table from which this route was obtained, either unicast, or DVMRP mroutes." ::= { myIpRpfEntry 6 } myMPingTable OBJECT-TYPE SYNTAX SEQUENCE OF MyMPingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "generate multicast traffic in the lab to test the multicast tree since it pings all members of the group, and all members respond." ::= { myMultMIBObjects 3 } myMPingEntry OBJECT-TYPE SYNTAX MyMPingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the starMPingTable." INDEX { myMPingIndex ,myMPingGroupAddress ,myMPingGroupMember} ::= { myMPingTable 1 } MyMPingEntry ::= SEQUENCE { myMPingIndex Integer32, myMPingGroupAddress IpAddress, myMPingGroupMember IpAddress, myMPingResponseTime TimeTicks, myMPingDataLength Unsigned32, myMPingTimeOuts Unsigned32, myMPingCompleted TruthValue, myMPingEntryStauts RowStatus } myMPingIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Object which specifies a unique entry in the myPingTable. A management station wishing to initiate a ping operation should use a pseudo-random value for this object when creating or modifying an instance of a myPingEntry. The RowStatus semantics of the myPingEntryStatus object will prevent access conflicts." ::= { myMPingEntry 1 } myMPingGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of group." ::= { myMPingEntry 2 } myMPingGroupMember OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of Member." ::= { myMPingEntry 3 } myMPingResponseTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The response time of member." ::= { myMPingEntry 4 } myMPingDataLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Pinged ICMP echo datagram's data length." DEFVAL { 1500 } ::= { myMPingEntry 5 } myMPingTimeOuts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Ping but no echo from required address, the time last for time out, in milliseconds." DEFVAL { 1000 } ::= { myMPingEntry 6 } myMPingCompleted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "While the ping process has completed the value of this field will be true(1), else false(2)." ::= { myMPingEntry 7 } myMPingEntryStauts OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "entry status for this list." ::= { myMPingEntry 8 } myIpMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF MyIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router." ::= { myMultMIBObjects 4 } myIpMRouteEntry OBJECT-TYPE SYNTAX MyIpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast group address. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime." INDEX { myIpMRouteGroup, myIpMRouteSource, myIpMRouteSourceMask} ::= { myIpMRouteTable 1 } MyIpMRouteEntry ::= SEQUENCE { myIpMRouteGroup IpAddress, myIpMRouteSource IpAddress, myIpMRouteSourceMask IpAddress, myIpMRouteRP IpAddress, myIpMRoutePruneFlag TruthValue, myIpMRouteSparseFlag TruthValue, myIpMRouteConnectedFlag TruthValue, myIpMRouteLocalFlag TruthValue, myIpMRouteRegisterFlag TruthValue, myIpMRouteRpFlag TruthValue, myIpMRouteSptFlag TruthValue, myIpMRouteInLimit Integer32, myIpMRouteLifeAvg Integer32, myIpMrouteGroupPktsCount Integer32, myIpMrouteSouceCount Integer32, myIpMrouteRpPkts Integer32, myIpMrouteRpPktsPerSec Integer32, myIpMrouteRpAvgPktsSize Integer32, myIpMrouteRpKilobitsPerSec Integer32, myIpMrouteSoucePkts Integer32, myIpMrouteSoucePktsPerSec Integer32, myIpMrouteSouceAvgPktsSize Integer32, myIpMrouteSouceKilobitsPerSec Integer32 } myIpMRouteGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of group." ::= { myIpMRouteEntry 1 } myIpMRouteSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of Souce." ::= { myIpMRouteEntry 2 } myIpMRouteSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mask of Souce address." ::= { myIpMRouteEntry 3 } myIpMRouteRP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of RP Route." ::= { myIpMRouteEntry 4 } myIpMRoutePruneFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicates whether this route is pruned. A pruned route is one that has an empty outgoing interface list or all interfaces are in Pruned state. A multicast packet that matches a pruned route doesn't get forwarded." ::= { myIpMRouteEntry 5 } myIpMRouteSparseFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicating PIM multicast routing protocol sparse-mode (versus dense-mode). In sparse-mode, packets are forwarded only out interfaces that have been joined. In dense-mode, they are forwarded out all interfaces that have not been pruned." ::= { myIpMRouteEntry 6 } myIpMRouteConnectedFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicating whether there is a directly connected member for a group attached to the router." ::= { myIpMRouteEntry 7 } myIpMRouteLocalFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicating whether local system is a member of a group on any interface." ::= { myIpMRouteEntry 8 } myIpMRouteRegisterFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicates whether to send registers for the entry. A first hop router directly connected to a multicast source host, as well as a border router on the boundary of two domains running different multicast routing protocols, encapsulates packets to be sent on the shared tree. This is done until the RP sends Joins back to this router." ::= { myIpMRouteEntry 9 } myIpMRouteRpFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicating whether there is a Prune state for this source along the shared tree." ::= { myIpMRouteEntry 10 } myIpMRouteSptFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean, indicating whether data is being received on the SPT tree, ie the Shortest Path Tree." ::= { myIpMRouteEntry 11 } myIpMRouteInLimit OBJECT-TYPE SYNTAX Integer32 (0..2147483647) UNITS "Kbits/second" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Incoming interface's limit for rate limiting data traffic, in Kbps. " ::= { myIpMRouteEntry 12 } myIpMRouteLifeAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average of data traffic." ::= { myIpMRouteEntry 13 } myIpMrouteGroupPktsCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of group packets." ::= { myIpMRouteEntry 14 } myIpMrouteSouceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of souce." ::= { myIpMRouteEntry 15 } myIpMrouteRpPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets count of Rp-Tree ." ::= { myIpMRouteEntry 16 } myIpMrouteRpPktsPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets count which Rp-Tree send in one second." ::= { myIpMRouteEntry 17 } myIpMrouteRpAvgPktsSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average packets size which Rp-Tree send ." ::= { myIpMRouteEntry 18 } myIpMrouteRpKilobitsPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Kilobits of Rp-Tree send in one second ." ::= { myIpMRouteEntry 19 } myIpMrouteSoucePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets count of souce ." ::= { myIpMRouteEntry 20 } myIpMrouteSoucePktsPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The packets count which souce send in one second." ::= { myIpMRouteEntry 21 } myIpMrouteSouceAvgPktsSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average packets size which souce send ." ::= { myIpMRouteEntry 22 } myIpMrouteSouceKilobitsPerSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Kilobits of Souce send in one second ." ::= { myIpMRouteEntry 23 } -- --mrinfo table -- myMrinfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MyMrinfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information for PIM neighbor." ::= { myMultMIBObjects 5 } myMrinfoEntry OBJECT-TYPE SYNTAX MyMrinfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) of starMrinfoTable." INDEX { myMrinfoIfAddress} ::= { myMrinfoTable 1 } MyMrinfoEntry ::= SEQUENCE { myMrinfoIfAddress IpAddress, myMrinfoNeighbor IpAddress, myMrinfoTtlThreshold Integer32, myMrinfoMetricOffset Integer32, myMrinfoQuerier TruthValue, myMrinfoDown TruthValue, myMrinfoLeaf TruthValue } myMrinfoIfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of Interface Router to request." ::= { myMrinfoEntry 1 } myMrinfoNeighbor OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of Interface neighbor,if there is no neigbor then return 0.0.0.0." ::= { myMrinfoEntry 2 } myMrinfoTtlThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." ::= { myMrinfoEntry 3 } myMrinfoMetricOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value added to the metric of a DVMRP route advertised in a report message." ::= { myMrinfoEntry 4 } myMrinfoQuerier OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If this interface is querier then the value of this field will be true(1), else false(2)." ::= { myMrinfoEntry 5 } myMrinfoDown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If this interface is down then the value of this field will be true(1), else false(2)." ::= { myMrinfoEntry 6 } myMrinfoLeaf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If locoal switch is leaf switch then the value of this field will be true(1), else false(2)." ::= { myMrinfoEntry 7 } -- --multicast vlan id Table -- myMultVidTable OBJECT-TYPE SYNTAX SEQUENCE OF MyMultVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing vlan id for interface." ::= { myMultMIBObjects 6 } myMultVidEntry OBJECT-TYPE SYNTAX MyMultVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) of myMultVidTable." INDEX { myMultInterfaceIfIndex } ::= { myMultVidTable 1 } MyMultVidEntry ::= SEQUENCE { myMultInterfaceIfIndex IfIndex, myMultVlan VlanId } myMultInterfaceIfIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { myMultVidEntry 1 } myMultVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicate the VID of the vlan which that this port belong to. This field is effective for only trunk port.The default value indicate the VID of the native vlan of that this port." ::= { myMultVidEntry 2 } -- units of conformance myMultMIBConformance OBJECT IDENTIFIER ::= { myMultMIB 2 } myMultMIBCompliances OBJECT IDENTIFIER ::= { myMultMIBConformance 1 } myMultMIBGroups OBJECT IDENTIFIER ::= { myMultMIBConformance 2 } -- compliance statements myMultMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the My MULTICAST MIB" MODULE -- this module MANDATORY-GROUPS { myIpMRouteInterfaceMIBGroup, myIpRpfMIBGroup, myMPingMIBGroup, myIpMRouteMIBGroup, myMrinfoMIBGroup, myMultVidMIBGroup } ::= { myMultMIBCompliances 1 } -- conformance information myIpMRouteInterfaceMIBGroup OBJECT-GROUP OBJECTS { myIpMRouteInterfaceIfIndex, myIpMRouteInterfaceTtl, myIpMRouteInterfaceProtocol, myIpMRouteInterfaceRateLimit, myIpMRouteInterfaceInMcastOctets, myIpMRouteInterfaceOutMcastOctets, myIpMRouteInterfaceHCInMcastOctets, myIpMRouteInterfaceHCOutMcastOctets, myIpMRouteBoundaryAclName } STATUS current DESCRIPTION "A collection of IP multicast route interface managment." ::= { myMultMIBGroups 1 } myIpRpfMIBGroup OBJECT-GROUP OBJECTS { myIpRpfSourceAddress, myIpRpfInterface, myIpRpfNeighborAddress, myIpRpfRouteAddress, myIpRpfRouteMask, myIpRpfType } STATUS current DESCRIPTION "A collection of IP RPF managment." ::= { myMultMIBGroups 2 } myMPingMIBGroup OBJECT-GROUP OBJECTS { myMPingIndex, myMPingGroupAddress, myMPingGroupMember, myMPingResponseTime, myMPingDataLength, myMPingTimeOuts, myMPingCompleted, myMPingEntryStauts } STATUS current DESCRIPTION "A collection of multicast ping managment." ::= { myMultMIBGroups 3 } myIpMRouteMIBGroup OBJECT-GROUP OBJECTS { myIpMRouteGroup, myIpMRouteSource, myIpMRouteSourceMask, myIpMRouteRP, myIpMRoutePruneFlag, myIpMRouteSparseFlag, myIpMRouteConnectedFlag, myIpMRouteLocalFlag, myIpMRouteRegisterFlag, myIpMRouteRpFlag, myIpMRouteSptFlag, myIpMRouteInLimit, myIpMRouteLifeAvg, myIpMrouteGroupPktsCount, myIpMrouteSouceCount, myIpMrouteRpPkts, myIpMrouteRpPktsPerSec, myIpMrouteRpAvgPktsSize, myIpMrouteRpKilobitsPerSec, myIpMrouteSoucePkts, myIpMrouteSoucePktsPerSec, myIpMrouteSouceAvgPktsSize, myIpMrouteSouceKilobitsPerSec } STATUS current DESCRIPTION "A collection of IP multicast route managment." ::= { myMultMIBGroups 4 } myMrinfoMIBGroup OBJECT-GROUP OBJECTS { myMrinfoIfAddress, myMrinfoNeighbor, myMrinfoTtlThreshold, myMrinfoMetricOffset, myMrinfoQuerier, myMrinfoDown, myMrinfoLeaf } STATUS current DESCRIPTION "A collection of multicast information" ::= { myMultMIBGroups 5 } myMultVidMIBGroup OBJECT-GROUP OBJECTS { myMultInterfaceIfIndex, myMultVlan } STATUS current DESCRIPTION "A collection of multicast vid information" ::= { myMultMIBGroups 6 } END