-- ***************************************************************** -- MY-TIME-MIB.mib: My Time MIB file -- -- $Copyright$ -- -- ***************************************************************** -- MY-TIME-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32 FROM SNMPv2-SMI TruthValue, DisplayString, RowStatus, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF myMgmt FROM MY-SMI; myTimeMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "$Company$" CONTACT-INFO " Tel: $Telephone$ E-mail: $E-mail$" DESCRIPTION "This module defines my time mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { myMgmt 15} myTimeMIBObjects OBJECT IDENTIFIER ::= { myTimeMIB 1 } myClockDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will track the date and time from the value set. Note that due to hardware limitations some systems may not be able to preserve such meaning across reboots of the system, as indicated by csyClockLostOnReboot. A constant value of all zeros and length 8 indicates the system is not aware of the present date and time." ::= { myTimeMIBObjects 1 } myClockWeek OBJECT-TYPE SYNTAX INTEGER(1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicate that which day currunt time of system indicate. e.g. 1 indicate Monday, 7 indicate Sunday" ::= { myTimeMIBObjects 2 } myTimeRangeMIBObjects OBJECT IDENTIFIER ::= { myTimeMIB 2} -- -- Time/scheduling range filter table -- myTimeRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF MyTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table of filters which can be used to effectively enable or disable policies based on a valid time range." ::= { myTimeRangeMIBObjects 1} myTimeRangeEntry OBJECT-TYPE SYNTAX MyTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given time range for which a policy may be filtered on to place the rule active or inactive." INDEX { myTimeRangeName } ::= { myTimeRangeTable 1 } MyTimeRangeEntry ::= SEQUENCE { myTimeRangeName DisplayString, myTimeRangePeriodMy DateAndTime, myTimeRangePeriodEnd DateAndTime, myTimeRangeRowStatus RowStatus } myTimeRangeName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administratively assigned name for this time range. This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { myTimeRangeEntry 1 } myTimeRangePeriodMy OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The mying time period for this filter. In addition to a normal DateAndTime string, this object may be set to the OCTET STRING value THISANDPRIOR which indicates that the filter is valid from any time before now up until (at least) now." DEFVAL { '0000010100000000'H } ::= { myTimeRangeEntry 2 } myTimeRangePeriodEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The ending time period for this filter. In addition to a normal DateAndTime string, this object may be set to the OCTET STRING value THISANDFUTURE which indicates that the filter is valid without an ending date and/or time." DEFVAL { '9999123123595909'H } ::= { myTimeRangeEntry 3 } myTimeRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the conceptual status of this row." ::= { myTimeRangeEntry 4 } -- -- Time range periodic filter table -- myTimeRangePeriodicTable OBJECT-TYPE SYNTAX SEQUENCE OF MyTimeRangePeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table of periodic time filters in the time-range." ::= { myTimeRangeMIBObjects 2 } myTimeRangePeriodicEntry OBJECT-TYPE SYNTAX MyTimeRangePeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given periodic time limit for the time-range." INDEX { myTimeRangePeriodicTRName } ::= { myTimeRangePeriodicTable 1 } MyTimeRangePeriodicEntry ::= SEQUENCE { myTimeRangePeriodicTRName DisplayString, myTimeRangePeriodicIndex Integer32, myTimeRangePeriodicType INTEGER, myTimeRangePeriodicMyWeekDay BITS, myTimeRangePeriodicEndWeekDay INTEGER, myTimeRangePeriodicTimeOfDayMy DateAndTime, myTimeRangePeriodicTimeOfDayEnd DateAndTime, myTimeRangePeriodicRowStatus RowStatus } myTimeRangePeriodicTRName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time-range name which this periodic time filter belong to. This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail." ::= { myTimeRangePeriodicEntry 1 } myTimeRangePeriodicIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Object which specifies a unique entry in the myTimeRangePeriodicTable. A management station wishing to initiate a entry operation should use a pseudo-random value for this object when creating or modifying an instance of a entry. The RowStatus semantics of the entry object will prevent access conflicts." ::= { myTimeRangePeriodicEntry 2 } myTimeRangePeriodicType OBJECT-TYPE SYNTAX INTEGER{ fixed-segment(1), unfixed-segment(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { myTimeRangePeriodicEntry 3 } myTimeRangePeriodicMyWeekDay OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL {'fe'H} ::= { myTimeRangePeriodicEntry 4 } myTimeRangePeriodicEndWeekDay OBJECT-TYPE SYNTAX INTEGER{ monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "myTimeRangePeriodicType fixed-segment" ::= { myTimeRangePeriodicEntry 5 } myTimeRangePeriodicTimeOfDayMy OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { myTimeRangePeriodicEntry 6 } myTimeRangePeriodicTimeOfDayEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { myTimeRangePeriodicEntry 7 } myTimeRangePeriodicRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the conceptual status of this row" ::= { myTimeRangePeriodicEntry 8 } myTimeMIBConformance OBJECT IDENTIFIER ::= { myTimeMIB 3 } myTimeMIBCompliances OBJECT IDENTIFIER ::= { myTimeMIBConformance 1 } myTimeMIBGroups OBJECT IDENTIFIER ::= { myTimeMIBConformance 2 } -- compliance statements myTimeMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the My Time MIB" MODULE -- this module GROUP myTimeMIBGroup DESCRIPTION "This group is mandatory for device which support RTC." GROUP myTimeRangeMIBGroup DESCRIPTION "This group is mandatory for device which support RTC or NTP/SNTP." ::= { myTimeMIBCompliances 1 } -- units of conformance myTimeMIBGroup OBJECT-GROUP OBJECTS { myClockDateAndTime, myClockWeek } STATUS current DESCRIPTION "A collection of objects providing time information." ::= { myTimeMIBGroups 1 } myTimeRangeMIBGroup OBJECT-GROUP OBJECTS { myTimeRangePeriodicTRName , myTimeRangePeriodicIndex , myTimeRangePeriodicType , myTimeRangePeriodicMyWeekDay , myTimeRangePeriodicEndWeekDay , myTimeRangePeriodicTimeOfDayMy , myTimeRangePeriodicTimeOfDayEnd , myTimeRangePeriodicRowStatus } STATUS current DESCRIPTION "A collection of objects providing time-range function." ::= { myTimeMIBGroups 2 } END