-- ***************************************************************** -- MY-PTOPO MIB: Extracted from RFC 2922 -- -- $Copyright$ -- -- ***************************************************************** MY-PTOPO-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, TimeStamp, TruthValue, MacAddress FROM SNMPv2-TC ConfigStatus, IfIndex FROM MY-TC VlanId FROM Q-BRIDGE-MIB EnabledStatus FROM P-BRIDGE-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF myMgmt FROM MY-SMI; myPotopoMIB MODULE-IDENTITY LAST-UPDATED "200304280000Z" ORGANIZATION "$Company$" CONTACT-INFO " Tel: $Telephone$ E-mail: $E-mail$" DESCRIPTION "The MIB module for physical topology information." REVISION "200304280000Z" DESCRIPTION "Initial Version of the Physical Topology MIB." ::= { myMgmt 33 } ptopoMIBObjects OBJECT IDENTIFIER ::= { myPotopoMIB 1 } -- MIB groups ptopoConnData OBJECT IDENTIFIER ::= { ptopoMIBObjects 1 } ptopoDevData OBJECT IDENTIFIER ::= { ptopoMIBObjects 2 } ptopoConfig OBJECT IDENTIFIER ::= { ptopoMIBObjects 3 } -- *********************************************************** -- -- P T O P O C O N N E C T I O N G R O U P -- -- *********************************************************** -- Connection Table ptopoConnTable OBJECT-TYPE SYNTAX SEQUENCE OF PtopoConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one ptopoConnEntry is present for each local port, or it may choose to maintain multiple ptopoConnEntries for the same local port. Entries based on lower numbered identifier types are preferred over higher numbered identifier types, i.e., lower values of the ptopoConnRemoteChassisType and ptopoConnRemotePortType objects." ::= { ptopoConnData 1 } ptopoConnEntry OBJECT-TYPE SYNTAX PtopoConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active." INDEX { ptopoConnIndex } ::= { ptopoConnTable 1 } PtopoConnEntry ::= SEQUENCE { ptopoConnIndex Integer32, ptopoConnLocalDevice MacAddress, ptopoConnLocalPort DisplayString, ptopoConnRemoteDevice MacAddress, ptopoConnRemotePort DisplayString, ptopoConnIsUpStream INTEGER } ptopoConnIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated local connection endpoint." ::= { ptopoConnEntry 1 } ptopoConnLocalDevice OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identical CPU mac address value used to identify the device associated with the local connection endpoint." ::= { ptopoConnEntry 2 } ptopoConnLocalPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index value used to identify the port component associated with the local connection endpoint. if the Interface is aggreated in any Aggregation port, use only it's own IfIndex, not the Aggregation port." ::= { ptopoConnEntry 3 } ptopoConnRemoteDevice OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the chassis component associated with the remote connection endpoint." ::= { ptopoConnEntry 4 } ptopoConnRemotePort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the port component associated with the remote connection endpoint." ::= { ptopoConnEntry 5 } ptopoConnIsUpStream OBJECT-TYPE SYNTAX INTEGER { upstream(1), nonupstream(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate whether the remote device and its port is the local device's upstream. if true the value of this object is upstream(1), otherwise nonupstream(2)." ::= { ptopoConnEntry 6 } -- *********************************************************** -- -- P T O P O D E V I C E D A T A G R O U P -- -- *********************************************************** -- Device Table ptopoDevTable OBJECT-TYPE SYNTAX SEQUENCE OF PtopoDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one or more rows per network device known to this agent, such as switches." ::= { ptopoDevData 1 } ptopoDevEntry OBJECT-TYPE SYNTAX PtopoDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network device . Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active." INDEX { ptopoDevID } ::= { ptopoDevTable 1 } PtopoDevEntry ::= SEQUENCE { ptopoDevID MacAddress, ptopoDevHostname DisplayString, ptopoDevClusStatus EnabledStatus, ptopoDevClusMode INTEGER, ptopoDevClusName DisplayString, ptopoDevCSMac MacAddress, ptopoDevHopsToCs Integer32, ptopoDevLastVerifyTime TimeStamp } ptopoDevID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Device ID of the device." ::= { ptopoDevEntry 1 } ptopoDevHostname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..22)) MAX-ACCESS read-only STATUS current DESCRIPTION "host name of the Device." ::= { ptopoDevEntry 2 } ptopoDevClusStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "cluster status of the Device." ::= { ptopoDevEntry 3 } ptopoDevClusMode OBJECT-TYPE SYNTAX INTEGER { commandDevice(1), memberDevice(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "cluster mode of the device." ::= { ptopoDevEntry 4 } ptopoDevClusName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "cluster name of the device. if the device is not in any cluster will return null string.(string length = 0)" ::= { ptopoDevEntry 5 } ptopoDevCSMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "cluster command switch mac address of the device. if the device if not in any cluster, will return value all 0." ::= { ptopoDevEntry 6 } ptopoDevHopsToCs OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "hops the device distance to the command switch." ::= { ptopoDevEntry 7 } ptopoDevLastVerifyTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "indicate the last time when the device can receive topology gather packetes, and response correctly. " ::= { ptopoDevEntry 8 } -- *********************************************************** -- -- P T O P O C O N F I G G R O U P -- -- *********************************************************** ptopoConfigInterval OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the desired time interval for whih an agent will my to get ptopoConnEntries." DEFVAL { 12 } ::= { ptopoConfig 1 } ptopoConfigMaxHoldTime OBJECT-TYPE SYNTAX Integer32 (1..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the desired time interval for which an agent will maintain ptopoConnEntries. After the specified number of seconds since the last time an entry was verified, in the absence of new verification (e.g., receipt of a topology protocol message), the agent shall remove the entry. Note that entries may not always be removed immediately, but may possibly be removed at periodic garbage collection intervals. Note that dynamic ptopoConnEntries may also be removed by the agent due to the expired timeliness of learned topology information (e.g., timeliness interval for a remote port expires). The actual age-out interval for a given entry is defined by the following formula: age-out-time = min(ptopoConfigMaxHoldTime, ) where is determined by the discovery algorithm, and may be different for each entry." DEFVAL { 120 } ::= { ptopoConfig 2 } ptopoConfigHopCount OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "hop count of the topology collection." DEFVAL { 3 } ::= { ptopoConfig 3 } END