--
-- 	Copyright 1995, 1996, 1997 Shiva Corporation
--

--
--	Shiva systems call control MIB
--

SHIVA-CALL-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE
		FROM RFC-1212		-- Concise MIB Definitions
	DisplayString
		FROM RFC1213-MIB
	Counter
		FROM RFC1155-SMI
	call
		FROM SHIVA-MIB;

    callPhoneGroupTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF CallPhoneGroupEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of the PhoneGroups configured in the box."
	::= { call 1 }

    callPhoneGroupEntry OBJECT-TYPE
	SYNTAX	CallPhoneGroupEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A Phone Group in Call Control."
	INDEX { callPhoneGroupNumber }
	::= { callPhoneGroupTable 1 }

    CallPhoneGroupEntry ::= SEQUENCE {
	callPhoneGroupNumber	INTEGER,
	callPhoneGroupName	DisplayString,
	callPhoneGroupState	INTEGER,
	callDataLinks		INTEGER,
	callTypeSource		INTEGER,
	callTypeForce		INTEGER,
	callIncomingCalls	Counter,
	callOutgoingCalls	Counter,
	callModemName		DisplayString,
	callAnswerInit		DisplayString,
	callInitString		DisplayString,
	callInitSpeed		INTEGER,
	callInitFlowControl	INTEGER,
	callInPools		DisplayString,
	callOutPools		DisplayString
    }

    callPhoneGroupNumber OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The configured number of this PhoneGroup.  For
		instance, if this is PhoneGroup7, the value is 7."
	::= { callPhoneGroupEntry 1 }

    callPhoneGroupName OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The configured name of this PhoneGroup."
	::= { callPhoneGroupEntry 2 }

    callPhoneGroupState OBJECT-TYPE
	SYNTAX	INTEGER {
		off(1),
		on(2),
		initFail(3),
		dmcDown(4)	-- down because associated DMC is down
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The state of this PhoneGroup."
	::= { callPhoneGroupEntry 3 }

    callDataLinks OBJECT-TYPE
	SYNTAX	INTEGER (0..63)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
                "This variable indicates the set of data-links
		that will be available to calls on this PhoneGroup.

    The callPhoneGroup DataLinks is a bit map represented as a sum,
    therefore, it can represent multiple data-links simultaneously.

    The various bit positions are:
	  1	callHDLC		HDLC, for PPP
	  2	callARAV1		ARA 1.0
	  4	callARAV2		ARA 2.0
	  8	callShell		Command shell
	 16	callAALAP		AALAP, for NetModem 1.x
					AppleTalk
	 32	callSLIP		SLIP listener (SLIP normally
					via Shell)
	 128	callL2FPPP		PPP encapsulated within L2F
	 256	callL2FSLIP		SLIP encapsulated within L2F"
	::= { callPhoneGroupEntry 4 }
    
    callTypeSource OBJECT-TYPE
	SYNTAX	INTEGER {
		switch(1),
		forced(2)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The source of the call type for calls to this
		PhoneGroup, for calls via PRI interfaces.  If the
		value is switch, it will be from information elements
		provided by the telephone network.  If the value is
		forced, the call type will be forced to the type
		specified in callTypeForce."
	::= { callPhoneGroupEntry 5 }

    callTypeForce OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		modemV34(2),
		digitalSync(3)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"If callTypeSource is forced, this is what calls
		over a PRI in this PhoneGroup will be interpreted as,
		ignoring anything in the PRI information elements.
		The modemV34 value means that the call will be treated
		as an analog call, and routed to an ITU-T V.34 modem.
		The digitalSync value means that the call will be
		treated as a digital call, containing synchronous
		digital data, eg. Synchronous PPP.

		For channelized T1 lines, all calls are routed to an
		ITU-T V.34 modem."
	::= { callPhoneGroupEntry 6 }

    callIncomingCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The number of incoming calls that were answered by
		this PhoneGroup."
	::= { callPhoneGroupEntry 7 }

    callOutgoingCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The number of outgoing calls that were originated by
		this PhoneGroup."
	::= { callPhoneGroupEntry 8 }

    callModemName OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The name of the type of modem (configuration) selected
		for use with calls to and from this PhoneGroup."
	::= { callPhoneGroupEntry 9 }

    callAnswerInit OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The initialization string sent to a modem when it
		will be answering a phone call to this PhoneGroup."
	::= { callPhoneGroupEntry 10 }

    callInitString OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The initialization string sent to a modem when it
		will be originating a phone call from this PhoneGroup."
	::= { callPhoneGroupEntry 11 }

    callInitSpeed OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The rate in bits per second at which communications
		with the modem will be initiated, for calls to and
		from this PhoneGroup."
	::= { callPhoneGroupEntry 12 }

    callInitFlowControl OBJECT-TYPE
	SYNTAX	INTEGER {
		none(1),	-- no flow control
		hardware(2),	-- hardware using RTS/CTS handshakes
		software(3)	-- software with XON/XOFF characters
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of flow control to use with the modem for
		calls to and from this PhoneGroup."
	::= { callPhoneGroupEntry 13 }

    callInPools OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The names of the incoming call pools that this
		PhoneGroup is a part of.  The names are in a list,
		seperated by commas."
	::= { callPhoneGroupEntry 14 }

    callOutPools OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The names of the outgoing call pools that this
		PhoneGroup is a part of.  The names are in a list,
		seperated by commas."
	::= { callPhoneGroupEntry 15 }

    callPhoneNumberTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF CallPhoneNumberEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of the telephone numbers associated with
		each of the PhoneGroups in the box.  Each phone number
		is associated with one, and only one, PhoneGroup."
	::= { call 2 }

    callPhoneNumberEntry OBJECT-TYPE
	SYNTAX	CallPhoneNumberEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A Phone Number in a PhoneGroup."
	INDEX { callPhoneNumberGroupNumber, callPhoneNumberIndex }
	::= { callPhoneNumberTable 1 }

    CallPhoneNumberEntry ::= SEQUENCE {
	callPhoneNumberGroupNumber   INTEGER,
	callPhoneNumberIndex	     INTEGER,
	callPhoneNumber		     DisplayString,
	callPhoneNumberState	     INTEGER,
	callPhoneNumberCalls	     Counter
    }

    callPhoneNumberGroupNumber OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"The configured number of this PhoneGroup.  For
		instance, if this is PhoneGroup7, the value is 7."
	::= { callPhoneNumberEntry 1 }

    callPhoneNumberIndex OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"The index of this telephone number associated with
		this PhoneGroup." 
	::= { callPhoneNumberEntry 2 }

    callPhoneNumber OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"A phone number that is a member of this PhoneGroup."
	::= { callPhoneNumberEntry 3 }

    callPhoneNumberState OBJECT-TYPE
	SYNTAX	INTEGER {
		active(1),
		idle(2)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The state of this telephone number."
	::= { callPhoneNumberEntry 4 }

    callPhoneNumberCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The number of incoming and outgoing calls that have
		occured on this phone number."
	::= { callPhoneNumberEntry 5 }


    callInterfaceTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF CallInterfaceEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of the interfaces that are usable
		by each PhoneGroup.  The presence of an entry
		in this table indicates that this interface
		is associated with this PhoneGroup.  Note that a
		particular interface may be associated with many 
		PhoneGroups."
	::= { call 3 }

    callInterfaceEntry OBJECT-TYPE
	SYNTAX	CallInterfaceEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"An interface in a PhoneGroup."
	INDEX { callInterfacePhoneGroup, callInterfaceIfIndex }
	::= { callInterfaceTable 1 }

    CallInterfaceEntry ::= SEQUENCE {
	callInterfacePhoneGroup		INTEGER,
	callInterfaceIfIndex		INTEGER
    }

    callInterfacePhoneGroup OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The configured number of this PhoneGroup.  For
		instance, if this is PhoneGroup7, the value is 7."
	::= { callInterfaceEntry 1 }

    callInterfaceIfIndex OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The ifIndex of an interface (timeslot WANInterfaceN:N)
		which is a member of this PhoneGroup."
	::= { callInterfaceEntry 2 }


    callActiveTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF CallActiveEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of the active calls on the box, giving
		ISDN characteristics."
	::= { call 4 }

    callActiveEntry OBJECT-TYPE
	SYNTAX	CallActiveEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"An active call."
	INDEX { callActiveIfIndex }
	::= { callActiveTable 1 }

    CallActiveEntry ::= SEQUENCE {
	callActiveIfIndex		INTEGER,
	callUnitNumber			INTEGER,
	callSequenceNumber		INTEGER,
	callActivePhoneGroup		INTEGER,
	callType			INTEGER,
	callLineSpeed			INTEGER,
	callLineStatus			INTEGER,
	callRateAdaptation		INTEGER,
	callSourceNumber		DisplayString,
	callSourceNumberType		INTEGER,
	callSourceNumberPlan		INTEGER,
	callSourceNumberPresentation	INTEGER,
	callSourceNumberScreening	INTEGER,
	callDestNumber			DisplayString,
	callDestNumberType		INTEGER,
	callDestNumberPlan		INTEGER,
	callDataType			INTEGER,
	callDirection			INTEGER
    }

    callActiveIfIndex OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"The ifIndex of the interface which this call
		is considered to be on.  This may be a timeslot,
		or may be the modem channel that the call has
		been assigned to.  SNMP statistics for the call are
		being kept on this interface."
	::= { callActiveEntry 1 }

    callUnitNumber OBJECT-TYPE
	SYNTAX	INTEGER (1..256)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The number of the interface on which this call
		is on.  This is the N number in the
		CallInterfaceN:#M name of the interface assigned
		for the duration of the call, as used in the event
		log.  This is also the index used in sessLineTable
		in the SHIVA-SESS-MIB."
	::= { callActiveEntry 2 }

    callSequenceNumber OBJECT-TYPE
	SYNTAX	INTEGER (65..32767)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The call sequence number for this call.  This is the M
		number of the CallInterfaceN:#M name of the interface
		assigned for the duration of the call, as used in the event
		log."
	::= { callActiveEntry 3 }

    callActivePhoneGroup OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The PhoneGroup that this call is on."
	::= { callActiveEntry 4 }

    callType OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		modemV34(2),
		digitalSync(3),
		digitalL2F(4)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of call, with respect to data transfer."
	::= { callActiveEntry 5 }

    callLineSpeed OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Speed in bits/second that the modem (if any) on this call is
		operating at."
	::= { callActiveEntry 6 }

    callLineStatus OBJECT-TYPE
	SYNTAX	INTEGER {
		disabled(1),
		initializing(2),
		idle(3),
		packet(4),	-- in use for packet-oriented networking
		character(5)	-- in use for character-oriented I/O
	}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Serial line status for the logical line associated
		with this call.  Setting callLineStatus to initializing(2)
		forces the logical line to be reinitialized."
	::= { callActiveEntry 7 }

    -- callRateAdaptation is presently always none, this is a deficiency.

    callRateAdaptation OBJECT-TYPE
	SYNTAX	INTEGER {
		none(1),	-- no rate adaptation
		v110(2),	-- ITU-T V.110 rate adaptation
		v120(3),	-- ITU-T V.120 rate adaptation
		v110-v42(4),	-- deprecated, never used
		piafs(5)	-- piafs rate adaptation
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of rate adaptation used for this call,
		if it is operating directly over ISDN."
	::= { callActiveEntry 8 }
    
    callSourceNumber OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The source (calling party) phone number of this call."
	::= { callActiveEntry 9 }

    callSourceNumberType OBJECT-TYPE
	SYNTAX	INTEGER {
		unknown(1),
		international(2),	-- starting with country code
		national(3),		-- starting with area code
		subscriber(4),
		abbreviated(5)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of telephone number, per ITU-T Q.931."
	::= { callActiveEntry 10 }

    callSourceNumberPlan OBJECT-TYPE
	SYNTAX	INTEGER {
		unknown(1),
		isdn(2),		-- ISDN numbering plan, per E.164
		telephony(3),		-- national telephony
					-- numbering plan
		private(4)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The numbering plan, per ITU-T Q.931."
	::= { callActiveEntry 11 }

    callSourceNumberPresentation OBJECT-TYPE
	SYNTAX	INTEGER {
		allowed(1),
		restricted(2),
		notAvailable(3)		-- due to interworking
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The presentation indicator, per ITU-T Q.931."
	::= { callActiveEntry 12 }

    callSourceNumberScreening OBJECT-TYPE
	SYNTAX	INTEGER {
		notScreened(1),
		verPassed(2),
		verFailed(3),
		networkProvided(4)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The screening indicator, per ITU-T Q.931."
	::= { callActiveEntry 13 }

    callDestNumber OBJECT-TYPE
	SYNTAX	DisplayString
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The destination (called party) phone number of this
		call."
	::= { callActiveEntry 14 }

    callDestNumberType OBJECT-TYPE
	SYNTAX	INTEGER {
		unknown(1),
		international(2),	-- starting with country code
		national(3),		-- starting with area code
		subscriber(4),
		abbreviated(5)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of telephone number, per ITU-T Q.931."
	::= { callActiveEntry 15 }

    callDestNumberPlan OBJECT-TYPE
	SYNTAX	INTEGER {
		unknown(1),
		isdn(2),		-- ISDN numbering plan, per E.164
		telephony(3),		-- national telephony
					-- numbering plan
		private(4)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The numbering plan, per ITU-T Q.931."
	::= { callActiveEntry 16 }

    callDataType OBJECT-TYPE
	SYNTAX	INTEGER {
		voice(1),	-- voice, possibly too bad for modem
		modem(2),	-- 3.1 KHz audio (high quality voice)
		dig56(3),	-- eight bit unavailable
		dig64(4),	-- pure 8 bit path
		dig64restricted(5), -- 8 bit, but no zero bytes
		vpdnppp(6),     -- PPP encapsulated within L2F, L2TP, etc.
		other(7)
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The type of the call, as reported or requested to
		ISDN signalling."
	::= { callActiveEntry 17 }

    callDirection OBJECT-TYPE
	SYNTAX	INTEGER { in(1), out(2) }
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The direction of the call."
	::= { callActiveEntry 18 }

    callInitDone OBJECT-TYPE
	SYNTAX INTEGER { true(1), false(2) }
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"This is false while the call-control system is
		initializing, and true forever afterwards.  Until
		it is true, the tables in this MIB will not exist,
		and the ifTable will not have the complete set
		of physical interfaces instantiated.  (The ifTable
		will continue to grow as dynamic PPP interfaces
		are instantiated.)"
	::= { call 5 }


    -- While the callWanInterfaceTable has been in the MIB since
    -- ShivOS 4.5, it wasn't actually implemented until ShivOS 5.4.

    callWanInterfaceTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF CallWanInterfaceEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table listing the WAN Interfaces and their configuration,
		primarily relating to common-channel signaling characteristics.
		(ISDN characteristics can be found in the appropriate
		IETF MIB.)"
	::= { call 6 }

    callWanInterfaceEntry OBJECT-TYPE
	SYNTAX	CallWanInterfaceEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A wan interface in a PhoneGroup."
	INDEX { callWanInterfaceIfIndex }
	::= { callWanInterfaceTable 1 }

    CallWanInterfaceEntry ::= SEQUENCE {
	callWanInterfaceIfIndex		INTEGER,
	callWanInterfaceDialType	INTEGER,
	callWanInterfaceSignallingType	INTEGER,
	callWanInterfaceSectionNumber	INTEGER,
	callWanInterfaceTotalIncomingCalls		Counter,
	callWanInterfaceTotalOutgoingCalls		Counter,
	callWanInterfaceTotalDigitalCalls		Counter,
	callWanInterfaceTotalDigitizedAnalogCalls	Counter,
	callWanInterfaceTotalAnalogCalls		Counter,
	callWanInterfaceTotalRadV110Calls		Counter,
	callWanInterfaceTotalRadV120Calls		Counter,
	callWanInterfaceTotalLeasedLineCalls		Counter,
	callWanInterfaceTotalPiafsCalls			Counter
    }

    callWanInterfaceIfIndex OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The ifIndex of this WANInterface.  Not related
		to the section number in the configuration."
	::= { callWanInterfaceEntry 1 }

    callWanInterfaceDialType OBJECT-TYPE
	-- We've taken the minor liberty of changing ISDN to isdn
	-- at ShivOS 5.5 for syntactic correctness.
	SYNTAX	INTEGER {
		   isdn(1),	-- ISDN dial
		   pulse(2),	-- pulse dial
		   tone(3),	-- tone dial: DTMF, multfrequency (R1),
				-- or 2-out-of-6 (R2)
		   none(4)	-- no dialing
		}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The wan interface's dial type."
	::= { callWanInterfaceEntry 2 }

    callWanInterfaceSignallingType OBJECT-TYPE
	-- The order of the enumeration is less than graceful
	-- due to adding new signalling types while maintaining
	-- backwards compatability.
	SYNTAX	INTEGER {
		   -- AT&T D4 channel bank, E&M lead signalling	
		   robbedBitWinkStart(1),		-- Wink Start
		   robbedBitImmediateStart(2),  	-- Immediate Start

		   -- AT&T D4 channel bank, Foreign Exchange Subscriber, 4ESS
		   robbedBit4ESSLoopStartWink(3), 	-- Loop Start wink
		   robbedBit4ESSLoopStartNoWink(4),	-- Loop Start no wink
		   robbedBit4ESSGroundStartWink(5),	-- Ground Start wink
		   robbedBit4ESSGroundStartNoWink(6),	-- Ground Start no wink

		   -- AT&T D4 channel bank, Foreign Exchange Subscriber, 5ESS
		   robbedBit5ESSLoopStart(7),
		   robbedBit5ESSGroundStart(8),

		   -- AT&T D4 channel bank, Foreign Exchange Office
		   robbedBitFXOLoopStart(9),		-- Loop Start
		   robbedBitFXOGroundStart(10),		-- Ground Start

		   -- types for ISDN (see IETF ISDN MIB for details)
   		   pri(11),				-- Primary Rate Int.
		   bri(12),				-- Basic Rate Int.

		   -- no signalling
		   none(13),

		   -- AT&T D4 channel bank, E&M lead signalling	
		   robbedBitDelayDial(14),		-- Delay Dial

		   -- D4 channel bank, ITU-T Signalling System R1 
		   -- (Q.300 series)
		   robbedBitR1(15),			-- Generic
		   robbedBitR1Taiwan(16),		-- Taiwan

		   -- E1 G.704 Time Slot 16 channel associated signalling, 
		   -- with ITU-T Signalling System R2 (Q.400 series)
	           signallingSystemR2(17),		-- Generic
	           signallingSystemR2China(18),		-- China
	           signallingSystemR2Mexico(19),	-- Mexico
	           signallingSystemR2NewZealand(20),	-- New Zealand
	           signallingSystemR2Venezuela(21),	-- Venezuela
	           signallingSystemR2Philippines(22),	-- Philippines
	           signallingSystemR2Brazil(23),	-- Brazil
	           signallingSystemR2Thailand(24),	-- Thailand
	           signallingSystemR2IndonesiaEricsson(25), 
							-- Indonesia, Ericsson
	           signallingSystemR2IndonesiaEM(26),	-- Indonesia, E&M
	           signallingSystemR2India(27),		-- India
	           signallingSystemR2ArgentinaQ421(28),	-- Argentina, Q.421
	           signallingSystemR2ArgentinaEM(29),	-- Argentina, E&M
	           signallingSystemR2ChileQ421(30),	-- Chile, Q.421
	           signallingSystemR2ChileEM(31),	-- Chile, E&M

		   -- E1 G.704 Time Slot 16 channel associated signalling, 
		   -- with ITU-T Signalling System R1 (Q.300 series)
	           signallingSystemR1Turkey(32)		-- Turkey
	}
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The wan interface's configured signalling type."
	::= { callWanInterfaceEntry 3 }

    callWanInterfaceSectionNumber OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The section number of this WAN Interface in the configuration.
		For example, if this WAN Interface is configured in section
		[WANInterface3], then 3 is the value of this variable."
	::= { callWanInterfaceEntry 4 }

    callWanInterfaceTotalIncomingCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of incoming calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 5 }

    callWanInterfaceTotalOutgoingCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of outgoing calls originating on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 6 }

    callWanInterfaceTotalDigitalCalls OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of digital calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 7 }

    callWanInterfaceTotalDigitizedAnalogCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of digitized analog calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 8 }

    callWanInterfaceTotalAnalogCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS 	mandatory	
	DESCRIPTION
		"The total number of analog calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 9 }

    callWanInterfaceTotalRadV110Calls OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of V.110 calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 10 }

    callWanInterfaceTotalRadV120Calls OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of V.120 calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 11 }

    callWanInterfaceTotalLeasedLineCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS 	mandatory
	DESCRIPTION
		"The total number of leased line calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 12 }

    callWanInterfaceTotalPiafsCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The total number of PIAFS calls received on this WAN interface since the device was last rebooted."
	::= { callWanInterfaceEntry 13 }


    -- Objects callTotalCalls through callLeasedLineCalls have been
    -- deprecated, as they have the wrong SYNTAX.  They are not Counters,
    -- they are INTEGERS, as they increase and decrease.  Sorry for
    -- the inconvenience.  They are replaced by callCurrentCalls through
    -- callCurrentLeasedLineCalls below.

    callTotalCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing calls of all types"
	::= { call 7 }

    callAnalogCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing analog calls on the RS-232 
		ports"
	::= { call 8 }

    callDigitalCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing digital calls over ISDN"
	::= { call 9 }

    callRadV110Calls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing rate adaptation V.110 calls"
	::= { call 10 }

    callRadV120Calls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing rate adaptation V.120 calls"
	::= { call 11 }

    callDigitizedAnalogCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing digitized analog (modem)
		 calls over ISDN"
	::= { call 12 }

    callLeasedLineCalls OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS	deprecated
	DESCRIPTION
		"Current incoming and outgoing leased line calls"
	::= { call 13 }

    -- The Objects callCurrentCalls through callCurrentLeasedLineCalls 
    -- replace the deprecated Objects callTotalCalls through
    -- callLeasedLineCalls above.  They have the correct syntax.

    callCurrentCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The current number of calls connected to the system,
		incoming and outgoing, for all call types."
	::= { call 14 }

    callCurrentAnalogCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing analog calls on RS-232 ports.
		This does NOT include analog calls over digital telephony
		interfaces, those are in callCurrentDigitizedAnalogCalls."
	::= { call 15 }

    callCurrentDigitalCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing synchronous digital (ISDN)
		calls.  Does not include rate-adapted calls."
	::= { call 16 }

    callCurrentRadV110Calls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing calls using ITU-T V.110
		rate adaptation."
	::= { call 17 }

    callCurrentRadV120Calls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing calls using ITU-T V.120
		rate adaptation."
	::= { call 18 }

    callCurrentDigitizedAnalogCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing calls using analog modem
		signalling (ITU-T V.34, etc.) over PCM modulation on
		ISDN or channel-associated-signalling digital telephony
		trunk interfaces."
	::= { call 19 }

    callCurrentLeasedLineCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing leased line calls"
	::= { call 20 }

    callCurrentPiafsCalls OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Current incoming and outgoing calls using PIAFS
		rate adaptation."
	::= { call 21 }

END