Wellfleet-CCTOPTS-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:38:49 EDT 1995 IMPORTS IpAddress, Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfCircuitOptsGroup FROM Wellfleet-COMMON-MIB; wfCctOptsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of circuit names" ::= { wfCircuitOptsGroup 1 } wfCctOptsEntry OBJECT-TYPE SYNTAX WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry format for the table of circuit options" INDEX { wfCctOptsCct } ::= { wfCctOptsTable 1 } WfCctOptsEntry ::= SEQUENCE { wfCctOptsDelete INTEGER, wfCctOptsPriorityQueueingDisable INTEGER, wfCctOptsCct INTEGER, wfCctOptsHighPriorityQueueLimit INTEGER, wfCctOptsNormalPriorityQueueLimit INTEGER, wfCctOptsLowPriorityQueueLimit INTEGER, wfCctOptsMaxInterruptQueueLatency INTEGER, wfCctOptsMaxHighPriorityQueueLatency INTEGER, wfCctOptsHiXmits Counter, wfCctOptsNormalXmits Counter, wfCctOptsLoXmits Counter, wfCctOptsHiClippedPkts Counter, wfCctOptsNormalClippedPkts Counter, wfCctOptsLoClippedPkts Counter, wfCctOptsIntrQHighWaterPkts Gauge, wfCctOptsHiQHighWaterPkts Gauge, wfCctOptsNormalQHighWaterPkts Gauge, wfCctOptsLoQHighWaterPkts Gauge, wfCctOptsHighWaterPktsClear INTEGER, wfCctOptsDroppedPkts Counter, wfCctOptsLargePkts Counter, wfCctOptsRxPkts Counter, wfCctOptsChooserType INTEGER, wfCctOptsPqDequeueAlgType INTEGER, wfCctOptsHiPercent INTEGER, wfCctOptsNormalPercent INTEGER, wfCctOptsLoPercent INTEGER, wfCctOptsHiTotalOctets Counter, wfCctOptsNormalTotalOctets Counter, wfCctOptsLoTotalOctets Counter, wfCctOptsCircuitType INTEGER, wfCctOptsBackupCct INTEGER, wfCctOptsPrimaryCctWanProtocolType INTEGER, wfCctOptsMacFilterFormat INTEGER, wfCctOptsPktsNotQueued Counter, wfCctOptsBitsShiftCount INTEGER, wfCctOptsFrSetDeLowQ INTEGER, wfCctOptsFrSetDeNormQ INTEGER, wfCctOptsShapedPriorityQueueLimit INTEGER, wfCctOptsMaxShapedPriorityQueueLatency INTEGER, wfCctOptsShapedXmits Counter, wfCctOptsShapedClippedPkts Counter, wfCctOptsShapedQHighWaterPkts Gauge, wfCctOptsShapedTotalOctets Counter, wfCctOptsPpqDebugLevel INTEGER, wfDequeueAtLineRate INTEGER } wfCctOptsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Creation and deletion flag for this record" DEFVAL { created } ::= { wfCctOptsEntry 1 } wfCctOptsPriorityQueueingDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Priority Queuing option" DEFVAL { enabled } ::= { wfCctOptsEntry 2 } wfCctOptsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "circuit number" ::= { wfCctOptsEntry 3 } wfCctOptsHighPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION "High Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot)" DEFVAL { default } ::= { wfCctOptsEntry 4 } wfCctOptsNormalPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION "Normal Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot)" DEFVAL { default } ::= { wfCctOptsEntry 5 } wfCctOptsLowPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION "Low Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot)" DEFVAL { default } ::= { wfCctOptsEntry 6 } wfCctOptsMaxInterruptQueueLatency OBJECT-TYPE SYNTAX INTEGER(100..5000) ACCESS read-write STATUS mandatory DESCRIPTION "Interrupt Queue Latency" DEFVAL { 2500 } ::= { wfCctOptsEntry 7 } wfCctOptsMaxHighPriorityQueueLatency OBJECT-TYPE SYNTAX INTEGER(100..5000) ACCESS read-write STATUS mandatory DESCRIPTION "High Priority Queue Latency" DEFVAL { 250 } ::= { wfCctOptsEntry 8 } wfCctOptsHiXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "High Priority Transmit count" ::= { wfCctOptsEntry 9 } wfCctOptsNormalXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Normal Priority Transmit count" ::= { wfCctOptsEntry 10 } wfCctOptsLoXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Low Priority Transmit count" ::= { wfCctOptsEntry 11 } wfCctOptsHiClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "High Prio Transmit Clip Count" ::= { wfCctOptsEntry 12 } wfCctOptsNormalClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Normal Prio Transmit Clip Count" ::= { wfCctOptsEntry 13 } wfCctOptsLoClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Low Prio Transmit Clip Count" ::= { wfCctOptsEntry 14 } wfCctOptsIntrQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Interrupt Queue high-water mark" ::= { wfCctOptsEntry 15 } wfCctOptsHiQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "High-priority Queue high-water mark" ::= { wfCctOptsEntry 16 } wfCctOptsNormalQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Normal Queue high-water mark" ::= { wfCctOptsEntry 17 } wfCctOptsLoQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Low-priority Queue high-water mark" ::= { wfCctOptsEntry 18 } wfCctOptsHighWaterPktsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero." ::= { wfCctOptsEntry 19 } wfCctOptsDroppedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets which were filtered in Priority Queueing" ::= { wfCctOptsEntry 20 } wfCctOptsLargePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Large Packets which became an exception to latency rules" ::= { wfCctOptsEntry 21 } wfCctOptsRxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets received" ::= { wfCctOptsEntry 22 } wfCctOptsChooserType OBJECT-TYPE SYNTAX INTEGER { random(1), addrbased(2), multilinkfr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Algorithm to choose line within a multiline circuit" DEFVAL { addrbased } ::= { wfCctOptsEntry 23 } wfCctOptsPqDequeueAlgType OBJECT-TYPE SYNTAX INTEGER { prioritization(1), allocation(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Selection of Priority Queueing dequeueing algorithm PQ_STRICT_PRIORITIZATION is 'classical' 7.50 dequeueing. PQ_BANDWIDTH_ALLOCATION makes exceptions to strict prioritization in order to prevent starvation of the Normal and/or Low priority traffic." DEFVAL { allocation } ::= { wfCctOptsEntry 24 } wfCctOptsHiPercent OBJECT-TYPE SYNTAX INTEGER { default(70) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the percent of the SYNC line bandwidth that the network manager wishes to allocate to traffic which has been configured to be High Priority. This parameter only has meaning when the bandwidth allocation dequeueing algorithm is enabled by setting the dequeueing algorithm type appropriately. With this parameter set other than 100, each time the configured percent utilization is reached, Normal and Low traffic is sent out (if any is queued up), up to their configured percentages." DEFVAL { default } ::= { wfCctOptsEntry 25 } wfCctOptsNormalPercent OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION "The minimum percent of the SYNC line that Normal-priority traffic will get (if there is any) when the Bandwidth Allocation feature is enabled. See text for wfCctOptsHiPercent for more information." DEFVAL { default } ::= { wfCctOptsEntry 26 } wfCctOptsLoPercent OBJECT-TYPE SYNTAX INTEGER { default(10) } ACCESS read-write STATUS mandatory DESCRIPTION "The minimum percent of the SYNC line that Low-priority traffic will get (if there is any) when the Bandwidth Allocation feature is enabled. See text for wfCctOptsHiPercent for more information." DEFVAL { default } ::= { wfCctOptsEntry 27 } wfCctOptsHiTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfCctOptsEntry 28 } wfCctOptsNormalTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfCctOptsEntry 29 } wfCctOptsLoTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm" ::= { wfCctOptsEntry 30 } wfCctOptsCircuitType OBJECT-TYPE SYNTAX INTEGER { normal(1), primary(2), dialondemand(3), bandwidthondemand(4), standbyprimary(5), unused(99) } ACCESS read-write STATUS mandatory DESCRIPTION "Circuit Type Attribute" DEFVAL { normal } ::= { wfCctOptsEntry 31 } wfCctOptsBackupCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "backup circuit number" ::= { wfCctOptsEntry 32 } wfCctOptsPrimaryCctWanProtocolType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), relay(3), sync(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of WAN protocol type which is running on the primary line. This attribute is only read when a dial backup circuit is using this mib record." DEFVAL { unknown } ::= { wfCctOptsEntry 33 } wfCctOptsMacFilterFormat OBJECT-TYPE SYNTAX INTEGER { default(1), tokenring(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to force the Mac src/dst address to be matched in Token Ring format." DEFVAL { default } ::= { wfCctOptsEntry 34 } wfCctOptsPktsNotQueued OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets that were not Queued or Dropped by Priority Queuing " ::= { wfCctOptsEntry 35 } wfCctOptsBitsShiftCount OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "Used to shift src/dst address to the right when addressed based chooser is set." ::= { wfCctOptsEntry 36 } wfCctOptsFrSetDeLowQ OBJECT-TYPE SYNTAX INTEGER { default(1), dontsetdebit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Low Queue, the Default is Do Set DE bit" DEFVAL { default } ::= { wfCctOptsEntry 37 } wfCctOptsFrSetDeNormQ OBJECT-TYPE SYNTAX INTEGER { default(1), setdebit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used on Frame Relay interfaces, allows Set of DE ( Discard Eligible ) bit of packets that end up in PQ's Normal Queue, the Default is Don't Set DE bit" DEFVAL { default } ::= { wfCctOptsEntry 38 } wfCctOptsShapedPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(200) } ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay Traffic Shaping Priority Queue Limit. the minimum valid value is zerom no maximum valid value (limited by bufs for the slot)." DEFVAL { default } ::= { wfCctOptsEntry 39 } wfCctOptsMaxShapedPriorityQueueLatency OBJECT-TYPE SYNTAX INTEGER(100..5000) ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay Traffic Shaping Priority Queue Latency." DEFVAL { 250 } ::= { wfCctOptsEntry 40 } wfCctOptsShapedXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frame Relay Traffic Shaping Priority Transmit count." ::= { wfCctOptsEntry 41 } wfCctOptsShapedClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frame Relay Traffic Shaping Transmit Clip count." ::= { wfCctOptsEntry 42 } wfCctOptsShapedQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Frame Relay Traffic Shaping Queue high-water mark." ::= { wfCctOptsEntry 43 } wfCctOptsShapedTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Running total of Frame Relay Traffic Shaping octets transmitted." ::= { wfCctOptsEntry 44 } wfCctOptsPpqDebugLevel OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Priority Queueing Debug Level." DEFVAL { 1 } ::= { wfCctOptsEntry 45 } wfDequeueAtLineRate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines whether the dequeuing from the queues is to be done at the line rate instead of the conventional technique or not." DEFVAL { disabled } ::= { wfCctOptsEntry 46 } wfCctOptsBrFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsBrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bridge Filters" ::= { wfCircuitOptsGroup 2 } wfCctOptsBrFilterEntry OBJECT-TYPE SYNTAX WfCctOptsBrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsBrFilterTable." INDEX { wfCctOptsBrFilterCct, wfCctOptsBrFilterRuleNumber, wfCctOptsBrFilterFragment } ::= { wfCctOptsBrFilterTable 1 } WfCctOptsBrFilterEntry ::= SEQUENCE { wfCctOptsBrFilterCreate INTEGER, wfCctOptsBrFilterEnable INTEGER, wfCctOptsBrFilterState INTEGER, wfCctOptsBrFilterCounter Counter, wfCctOptsBrFilterDefinition OCTET STRING, wfCctOptsBrFilterReserved INTEGER, wfCctOptsBrFilterCct INTEGER, wfCctOptsBrFilterRuleNumber INTEGER, wfCctOptsBrFilterFragment INTEGER, wfCctOptsBrFilterName DisplayString } wfCctOptsBrFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfCctOptsBrFilterEntry 1 } wfCctOptsBrFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfCctOptsBrFilterEntry 2 } wfCctOptsBrFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfCctOptsBrFilterEntry 3 } wfCctOptsBrFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfCctOptsBrFilterEntry 4 } wfCctOptsBrFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfCctOptsBrFilterEntry 5 } wfCctOptsBrFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfCctOptsBrFilterEntry 6 } wfCctOptsBrFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the CctBridge Cct to which the filter is applied." ::= { wfCctOptsBrFilterEntry 7 } wfCctOptsBrFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfCctOptsBrFilterEntry 8 } wfCctOptsBrFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfCctOptsBrFilterEntry 9 } wfCctOptsBrFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfCctOptsBrFilterEntry 10 } wfCctOptsIpFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ip Filters" ::= { wfCircuitOptsGroup 3 } wfCctOptsIpFilterEntry OBJECT-TYPE SYNTAX WfCctOptsIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsIpFilterTable." INDEX { wfCctOptsIpFilterCct, wfCctOptsIpFilterRuleNumber, wfCctOptsIpFilterFragment } ::= { wfCctOptsIpFilterTable 1 } WfCctOptsIpFilterEntry ::= SEQUENCE { wfCctOptsIpFilterCreate INTEGER, wfCctOptsIpFilterEnable INTEGER, wfCctOptsIpFilterState INTEGER, wfCctOptsIpFilterCounter Counter, wfCctOptsIpFilterDefinition OCTET STRING, wfCctOptsIpFilterReserved INTEGER, wfCctOptsIpFilterCct INTEGER, wfCctOptsIpFilterRuleNumber INTEGER, wfCctOptsIpFilterFragment INTEGER, wfCctOptsIpFilterName DisplayString } wfCctOptsIpFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfCctOptsIpFilterEntry 1 } wfCctOptsIpFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfCctOptsIpFilterEntry 2 } wfCctOptsIpFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfCctOptsIpFilterEntry 3 } wfCctOptsIpFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfCctOptsIpFilterEntry 4 } wfCctOptsIpFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfCctOptsIpFilterEntry 5 } wfCctOptsIpFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfCctOptsIpFilterEntry 6 } wfCctOptsIpFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the CctIp Cct to which the filter is applied." ::= { wfCctOptsIpFilterEntry 7 } wfCctOptsIpFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfCctOptsIpFilterEntry 8 } wfCctOptsIpFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfCctOptsIpFilterEntry 9 } wfCctOptsIpFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfCctOptsIpFilterEntry 10 } wfCctOptsLengthBasedTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsLengthBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Length Based Priority Table" ::= { wfCircuitOptsGroup 4 } wfCctOptsLengthBasedEntry OBJECT-TYPE SYNTAX WfCctOptsLengthBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsLengthBasedTable." INDEX { wfCctOptsLengthBasedCct, wfCctOptsLengthBasedMux, wfCctOptsLengthBasedData } ::= { wfCctOptsLengthBasedTable 1 } WfCctOptsLengthBasedEntry ::= SEQUENCE { wfCctOptsLengthBasedDelete INTEGER, wfCctOptsLengthBasedDisable INTEGER, wfCctOptsLengthBasedState INTEGER, wfCctOptsLengthBasedCct INTEGER, wfCctOptsLengthBasedMux INTEGER, wfCctOptsLengthBasedData OCTET STRING, wfCctOptsLengthBasedLength INTEGER, wfCctOptsLengthBasedLessThanQ INTEGER, wfCctOptsLengthBasedGreaterThanQ INTEGER } wfCctOptsLengthBasedDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the length based priority filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfCctOptsLengthBasedEntry 1 } wfCctOptsLengthBasedDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the length based priority filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfCctOptsLengthBasedEntry 2 } wfCctOptsLengthBasedState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current State of the length based priority filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfCctOptsLengthBasedEntry 3 } wfCctOptsLengthBasedCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Cct to which the filter is applied" ::= { wfCctOptsLengthBasedEntry 4 } wfCctOptsLengthBasedMux OBJECT-TYPE SYNTAX INTEGER { etype(1), lsap(2), snap(3) } ACCESS read-only STATUS mandatory DESCRIPTION "packet mux type" ::= { wfCctOptsLengthBasedEntry 5 } wfCctOptsLengthBasedData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5)) ACCESS read-only STATUS mandatory DESCRIPTION "a five byte quantity of the form ethernet - 0x6003000000 (e.g. DECnet) lsap - 0xfefe030000 (e.g. OSI) snap - 0x0000000800 (e.g. IP) - 0x0800070800 (e.g. Appletalk DDP)" ::= { wfCctOptsLengthBasedEntry 6 } wfCctOptsLengthBasedLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum length of a packet to be considered high priority" ::= { wfCctOptsLengthBasedEntry 7 } wfCctOptsLengthBasedLessThanQ OBJECT-TYPE SYNTAX INTEGER { hi(3), normal(2), lo(1) } ACCESS read-write STATUS mandatory DESCRIPTION "queue into which packets of length less than or equal wfCctOptsLengthBasedLength are placed" DEFVAL { normal } ::= { wfCctOptsLengthBasedEntry 8 } wfCctOptsLengthBasedGreaterThanQ OBJECT-TYPE SYNTAX INTEGER { hi(3), normal(2), lo(1) } ACCESS read-write STATUS mandatory DESCRIPTION "queue into which packets of length greater than wfCctOptsLengthBasedLength are placed" DEFVAL { lo } ::= { wfCctOptsLengthBasedEntry 9 } wfSwservOptsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSwservOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of circuits defined over switched services" ::= { wfCircuitOptsGroup 5 } wfSwservOptsEntry OBJECT-TYPE SYNTAX WfSwservOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry format for the table of sw_serv circuit options" INDEX { wfSwservOptsCct } ::= { wfSwservOptsTable 1 } WfSwservOptsEntry ::= SEQUENCE { wfSwservOptsDelete INTEGER, wfSwservOptsCct INTEGER, wfSwservOptsCircuitType INTEGER, wfSwservOptsBackupCct INTEGER, wfSwservOptsBackupPool INTEGER, wfSwservOptsDemandPool INTEGER, wfSwservOptsBackupMode INTEGER, wfSwservOptsActiveBackupCct INTEGER, wfSwservOptsForcedDial INTEGER, wfSwservOptsMaxUpTime INTEGER, wfSwservOptsBringUpHour INTEGER, wfSwservOptsBringUpMinute INTEGER, wfSwservOptsTakeDownHour INTEGER, wfSwservOptsTakeDownMinute INTEGER, wfSwservOptsInactivityTime INTEGER, wfSwservOptsCircuitState INTEGER, wfSwservOptsPrimaryDownTime INTEGER, wfSwservOptsNumOutgoingConn Counter, wfSwservOptsNumIncomingConn Counter, wfSwservOptsActiveSlot INTEGER, wfSwservOptsActiveLine INTEGER, wfSwservOptsPacketsDropped Counter, wfSwservOptsTimeLastPktDropped INTEGER, wfSwservOptsForcedTakedown INTEGER, wfSwservOptsRetryMax INTEGER, wfSwservOptsRetryCount Counter, wfSwservOptsRetryDelay INTEGER, wfSwservOptsDemandConnectionMode INTEGER, wfSwservOptsAutoDemandTermination INTEGER, wfSwservOptsAutoDemandTermReset INTEGER, wfSwservOptsChapLocalName DisplayString, wfSwservOptsChapSecret DisplayString, wfSwservOptsMaxUpTermination INTEGER, wfSwservOptsMaxUpTermReset INTEGER, wfSwservOptsBandwidthPool INTEGER, wfSwservOptsBandwidthMode INTEGER, wfSwservOptsPapId DisplayString, wfSwservOptsPapPassword DisplayString, wfSwservOptsDebugMsgLevel INTEGER, wfSwservOptsDmdCctGroupNum INTEGER, wfSwservOptsWanProtocol INTEGER, wfSwservOptsSecondaryCct INTEGER, wfSwservOptsPoolLineNumber INTEGER, wfSwservOptsPoolLineIndex INTEGER, wfSwservOptsMinDuration INTEGER, wfSwservOptsInactivityMode INTEGER, wfSwservOptsOpportunityRouting INTEGER, wfSwservOptsOutboundAuth INTEGER, wfSwservOptsOverSubRetryTimer INTEGER, wfSwservOptsStandbyMode INTEGER, wfSwservOptsStandbyFailBackMode INTEGER, wfSwservOptsManualStandbyAction INTEGER, wfSwservOptsCallbackMode INTEGER, wfSwservOptsCallbackServerDelay INTEGER, wfSwservOptsCallbackClientDelay INTEGER, wfSwservOptsQueueSize INTEGER, wfSwservOptsDequeueWaitTimer INTEGER, wfSwservOptsMru INTEGER, wfSwservOptsRfc1661Compliance INTEGER, wfSwservOptsBootupDelay INTEGER, wfSwservOptsCallbackOptRfc1570 INTEGER, wfSwservOptsCallbackDataRfc1570 DisplayString } wfSwservOptsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Creation and deletion flag" DEFVAL { created } ::= { wfSwservOptsEntry 1 } wfSwservOptsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit Number" ::= { wfSwservOptsEntry 2 } wfSwservOptsCircuitType OBJECT-TYPE SYNTAX INTEGER { normal(1), primary(2), dialondemand(3), bandwidthondemand(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Circuit Type Attribute" DEFVAL { normal } ::= { wfSwservOptsEntry 3 } wfSwservOptsBackupCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Backup Circuit Number assigned by site manager" ::= { wfSwservOptsEntry 4 } wfSwservOptsBackupPool OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Backup Pool Id" ::= { wfSwservOptsEntry 5 } wfSwservOptsDemandPool OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Dial on Demand Pool Id" ::= { wfSwservOptsEntry 6 } wfSwservOptsBackupMode OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode Master ( initiate dialing ) or Slave" DEFVAL { master } ::= { wfSwservOptsEntry 7 } wfSwservOptsActiveBackupCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Backup Indicator" ::= { wfSwservOptsEntry 8 } wfSwservOptsForcedDial OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Forced Dial Indicator" DEFVAL { disabled } ::= { wfSwservOptsEntry 9 } wfSwservOptsMaxUpTime OBJECT-TYPE SYNTAX INTEGER(1..999999) ACCESS read-write STATUS mandatory DESCRIPTION "Max amount fo time dial call can exist" DEFVAL { 60 } ::= { wfSwservOptsEntry 10 } wfSwservOptsBringUpHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time of day hour to allow a line to dial" ::= { wfSwservOptsEntry 11 } wfSwservOptsBringUpMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time of day minute to allow a line to dial" ::= { wfSwservOptsEntry 12 } wfSwservOptsTakeDownHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time of day hour to take down a dial line" ::= { wfSwservOptsEntry 13 } wfSwservOptsTakeDownMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time of day minute to take down a dial line" ::= { wfSwservOptsEntry 14 } wfSwservOptsInactivityTime OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum for inactivity timer is equal to infinity = 99999999" DEFVAL { 60 } ::= { wfSwservOptsEntry 15 } wfSwservOptsCircuitState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), notpresent(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Circuit State" DEFVAL { notpresent } ::= { wfSwservOptsEntry 16 } wfSwservOptsPrimaryDownTime OBJECT-TYPE SYNTAX INTEGER { default(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Amount of time allowed for establishment of primary before the backup is invoked" DEFVAL { default } ::= { wfSwservOptsEntry 17 } wfSwservOptsNumOutgoingConn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Outgoing call attempts for this circuit" ::= { wfSwservOptsEntry 18 } wfSwservOptsNumIncomingConn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Incoming call attempts for this circuit" ::= { wfSwservOptsEntry 19 } wfSwservOptsActiveSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot actively in use by this call" ::= { wfSwservOptsEntry 20 } wfSwservOptsActiveLine OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line actively in use by this call" ::= { wfSwservOptsEntry 21 } wfSwservOptsPacketsDropped OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Incoming call attempts for this circuit" ::= { wfSwservOptsEntry 22 } wfSwservOptsTimeLastPktDropped OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Incoming call attempts for this circuit" ::= { wfSwservOptsEntry 23 } wfSwservOptsForcedTakedown OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Forced Dial Indicator" DEFVAL { disabled } ::= { wfSwservOptsEntry 24 } wfSwservOptsRetryMax OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Redial count" DEFVAL { 2 } ::= { wfSwservOptsEntry 25 } wfSwservOptsRetryCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Redial count" ::= { wfSwservOptsEntry 26 } wfSwservOptsRetryDelay OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "delay to wait after retrys fails. value is in seconds" DEFVAL { 3 } ::= { wfSwservOptsEntry 27 } wfSwservOptsDemandConnectionMode OBJECT-TYPE SYNTAX INTEGER { nodial(1), collmaster(2), collslave(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode Master - outgoing call has precedence terminate incoming call Slave - incoming call has precedence terminate outgoing call NO_Dial - if data is present do MOT establish connection just drop the data" DEFVAL { collmaster } ::= { wfSwservOptsEntry 28 } wfSwservOptsAutoDemandTermination OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Automatically terminates demand circuit if maximum connect attempts reached" DEFVAL { disabled } ::= { wfSwservOptsEntry 29 } wfSwservOptsAutoDemandTermReset OBJECT-TYPE SYNTAX INTEGER(1..999999) ACCESS read-write STATUS mandatory DESCRIPTION "Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination" DEFVAL { 60 } ::= { wfSwservOptsEntry 30 } wfSwservOptsChapLocalName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to assign a local CHAP Name to outbound calls to to inform our peer of our identity, during WHOAMI processing" ::= { wfSwservOptsEntry 31 } wfSwservOptsChapSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Secret used for running CHAP when this cct is active. The peer must use the same secret when responding to our Challenges, which will be found in the Whoami Table" ::= { wfSwservOptsEntry 32 } wfSwservOptsMaxUpTermination OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Automatically terminates demand circuit if maximum connect attempts reached" DEFVAL { disabled } ::= { wfSwservOptsEntry 33 } wfSwservOptsMaxUpTermReset OBJECT-TYPE SYNTAX INTEGER(1..999999) ACCESS read-write STATUS mandatory DESCRIPTION "Amount of time ( in Minutes )before atttempting to recreate the demand circuit after an auto termination" DEFVAL { 60 } ::= { wfSwservOptsEntry 34 } wfSwservOptsBandwidthPool OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth on Demand Pool Id" ::= { wfSwservOptsEntry 35 } wfSwservOptsBandwidthMode OBJECT-TYPE SYNTAX INTEGER { monitor(1), normal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth Mode Monitor (Congestion Monitor) or NORMAL" DEFVAL { normal } ::= { wfSwservOptsEntry 36 } wfSwservOptsPapId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to assign a local PAP Id to outbound calls to to inform our peer of our identity, during WHOAMI processing" ::= { wfSwservOptsEntry 37 } wfSwservOptsPapPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to assign a local PAP Password to outbound calls to to inform our peer of our identity, during WHOAMI processing" ::= { wfSwservOptsEntry 38 } wfSwservOptsDebugMsgLevel OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), debug(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to assign the level of Swserv Debug message to be logged for the circuit" DEFVAL { debug } ::= { wfSwservOptsEntry 39 } wfSwservOptsDmdCctGroupNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Backup Circuit Number assigned by site manager" ::= { wfSwservOptsEntry 40 } wfSwservOptsWanProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), fr(3), frswitch(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Wan Protocol for this circuit assigned by site manager. Used by BNX Software to Support ISDN Switched access to Frame Relay Switch Network." DEFVAL { ppp } ::= { wfSwservOptsEntry 41 } wfSwservOptsSecondaryCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Secondary circuit to be used by Line Manager when creating a backup for this primary circuit." ::= { wfSwservOptsEntry 42 } wfSwservOptsPoolLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Pooling line number used for identifying Frame Relay backup interface objects associated with a pool." ::= { wfSwservOptsEntry 43 } wfSwservOptsPoolLineIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Lower layer index used for identifying Frame Relay backup interface objects associated with a pool." ::= { wfSwservOptsEntry 44 } wfSwservOptsMinDuration OBJECT-TYPE SYNTAX INTEGER(10..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum for min duration timer in seconds is equal to infinity = 99999999, min is 10" DEFVAL { 60 } ::= { wfSwservOptsEntry 45 } wfSwservOptsInactivityMode OBJECT-TYPE SYNTAX INTEGER { bothdirection(1), transmitonly(2), receiveonly(3), eitherdirection(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity check mode" DEFVAL { bothdirection } ::= { wfSwservOptsEntry 46 } wfSwservOptsOpportunityRouting OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OpportunityRouting Indicator" DEFVAL { disabled } ::= { wfSwservOptsEntry 47 } wfSwservOptsOutboundAuth OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows the disabling of Authentication when the router is placing an outbound call." DEFVAL { enabled } ::= { wfSwservOptsEntry 48 } wfSwservOptsOverSubRetryTimer OBJECT-TYPE SYNTAX INTEGER(0..1440) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows the user to cofigure the time period at which a connection will be retried, if a previous connection attempt for routing updates failed due to lack of line resources. This time should be less than the stabilization timer for IP/IPX protocols. This time is expressed in minutes and is meaningful only if Dial Optimized Routing is enabled." DEFVAL { 2 } ::= { wfSwservOptsEntry 49 } wfSwservOptsStandbyMode OBJECT-TYPE SYNTAX INTEGER{ demandnormal(1), standbynormal(2), standbyhot(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows a demand circuit to be identified as standby or demand. The hot standby circuit is down until an event invokes it. Normal standby is invoked manually or by an incoming call." DEFVAL { demandnormal } ::= { wfSwservOptsEntry 50 } wfSwservOptsStandbyFailBackMode OBJECT-TYPE SYNTAX INTEGER{ none(1), automatic(2), manual(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to indicate if standby failback should be automatic or manual." DEFVAL { none } ::= { wfSwservOptsEntry 51 } wfSwservOptsManualStandbyAction OBJECT-TYPE SYNTAX INTEGER{ noaction(1), activate(2), deactivate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter is used to manually activate and deactivate a standby circuit." DEFVAL { noaction } ::= { wfSwservOptsEntry 52 } wfSwservOptsCallbackMode OBJECT-TYPE SYNTAX INTEGER { inactive(1), server(2), client(3), server-callid(4), client-one-charge(5), server-one-charge(6), server-one-charge-callid(7), client-rfc1570(8), server-rfc1570(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the role this circuit will play in Callback. INACTIVE disables Callback on this circuit. SERVER performs Callback via Outgoing Phone Number. CLIENT circuit expects peer to perform Callback. SERVER_CALLID performs Callback via ANI" DEFVAL { inactive } ::= { wfSwservOptsEntry 53 } wfSwservOptsCallbackServerDelay OBJECT-TYPE SYNTAX INTEGER(0..1800) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time the CALLBACK_SERVER will wait, (in seconds) before performing Callback,dialing back the initial caller. The default time is 0, however modem connections may need some delay configured to prevent busy situations." ::= { wfSwservOptsEntry 54 } wfSwservOptsCallbackClientDelay OBJECT-TYPE SYNTAX INTEGER(0..1800) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time the CALLBACK_CLIENT will wait, (in seconds) for its peer to perform Callback. Data ariving during opperation of the timer, will not cause a connection to be established." DEFVAL { 5 } ::= { wfSwservOptsEntry 55 } wfSwservOptsQueueSize OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the length of the queue used for dial services." DEFVAL { 6 } ::= { wfSwservOptsEntry 56 } wfSwservOptsDequeueWaitTimer OBJECT-TYPE SYNTAX INTEGER(0..600) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter controls the time FR waits before dequeuing data for FRDOD." DEFVAL { 0 } ::= { wfSwservOptsEntry 57 } wfSwservOptsMru OBJECT-TYPE SYNTAX INTEGER(1..4600) ACCESS read-write STATUS mandatory DESCRIPTION "This is the MRU being used for this demand circuit." DEFVAL { 1500 } ::= { wfSwservOptsEntry 58 } wfSwservOptsRfc1661Compliance OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable RFC 1661 compliance" DEFVAL { disabled } ::= { wfSwservOptsEntry 59 } wfSwservOptsBootupDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Delay in initiation of the DoD circuit at bootup time" DEFVAL { 0 } ::= { wfSwservOptsEntry 60 } wfSwservOptsCallbackOptRfc1570 OBJECT-TYPE SYNTAX INTEGER { location(1), dialstring(2), locationid(3), e164number(4), name(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The PPP/LCP Callback Option; indicates the type of data content the callback client places in wfSwservOptsCallbackDataRfc1570 for the callback server" DEFVAL { dialstring } ::= { wfSwservOptsEntry 61 } wfSwservOptsCallbackDataRfc1570 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The PPP/LCP Callback Data; the actual callback client data which is sent to the callback server for processing" ::= { wfSwservOptsEntry 62 } wfSwservOutPhoneNumTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSwservOutPhoneNumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*************************************** SWSERV outgoing phone number list " ::= { wfCircuitOptsGroup 6 } wfSwservOutPhoneNumEntry OBJECT-TYPE SYNTAX WfSwservOutPhoneNumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the SWSERV_SYNC table" INDEX { wfSwservOutPhoneNumCct, wfSwservOutPhoneNumIndex } ::= { wfSwservOutPhoneNumTable 1 } WfSwservOutPhoneNumEntry ::= SEQUENCE { wfSwservOutPhoneNumDelete INTEGER, wfSwservOutPhoneNumCct INTEGER, wfSwservOutPhoneNumIndex INTEGER, wfSwservOutPhoneNumRmtStationNum DisplayString, wfSwservOutPhoneNumSubAddr DisplayString, wfSwservOutPhoneNumDelimiter DisplayString, wfSwservOutPhoneNumType INTEGER, wfSwservOutPhoneNumTypeofNum INTEGER, wfSwservOutPhoneNumPlan INTEGER, wfSwservOutPhoneNumRateAdaption INTEGER, wfSwservOutPhoneNumRemotePoolType INTEGER, wfSwservOutPhoneNumConnectionType INTEGER, wfSwservOutPhoneNumChannelType INTEGER, wfSwservOutPhoneNumAggrChanCnt INTEGER, wfSwservOutPhoneNumPrefix DisplayString, wfSwservOutPhoneNumBearerService INTEGER } wfSwservOutPhoneNumDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Delete this phone number from the list" DEFVAL { create } ::= { wfSwservOutPhoneNumEntry 1 } wfSwservOutPhoneNumCct OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-only STATUS mandatory DESCRIPTION "CCT number for this phone list instance" ::= { wfSwservOutPhoneNumEntry 2 } wfSwservOutPhoneNumIndex OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-only STATUS mandatory DESCRIPTION "a unique one up type number to create a list" ::= { wfSwservOutPhoneNumEntry 3 } wfSwservOutPhoneNumRmtStationNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "the station address (phone number) of the remote system" ::= { wfSwservOutPhoneNumEntry 4 } wfSwservOutPhoneNumSubAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for Swserv phone numbers, the sub address portion" ::= { wfSwservOutPhoneNumEntry 5 } wfSwservOutPhoneNumDelimiter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for Swserv phone numbers, the delimiter portion" ::= { wfSwservOutPhoneNumEntry 6 } wfSwservOutPhoneNumType OBJECT-TYPE SYNTAX INTEGER { dial(1), isdn(2), dialasync(3) } ACCESS read-write STATUS mandatory DESCRIPTION "phone number types; ISDN types, Modem Sync Dial or Async Dial types" DEFVAL { dial } ::= { wfSwservOutPhoneNumEntry 7 } wfSwservOutPhoneNumTypeofNum OBJECT-TYPE SYNTAX INTEGER { unknown(1), international(16), national(32), specific(48), subscriber(64), abbreviated(96) } ACCESS read-write STATUS mandatory DESCRIPTION "IF ISDN type number, it needs type of number UNKNOWN Type is 0, use 1 to satisfy MDL requirement This attribute value will be ANDED with 0xFFF0 before using it." DEFVAL { unknown } ::= { wfSwservOutPhoneNumEntry 8 } wfSwservOutPhoneNumPlan OBJECT-TYPE SYNTAX INTEGER { unknown(16), telephony(01), x121(03), telex(04), standard(08), private(09) } ACCESS read-write STATUS mandatory DESCRIPTION "If Isdn and if type of number is UNKNOWN or INERNATIONAL or NATIONAL or SUBSCRIBER then a plan number is needed. UNKNOWN is 0 , using 16 (0x10)to satisfy MDL requirement. We will AND this field with 0x0F before using it." DEFVAL { unknown } ::= { wfSwservOutPhoneNumEntry 9 } wfSwservOutPhoneNumRateAdaption OBJECT-TYPE SYNTAX INTEGER { rate64(1), rate56(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If Isdn and if a specifis Transfer rate is to be requested when establishing a call to this distination address specify the desired rate." DEFVAL { rate64 } ::= { wfSwservOutPhoneNumEntry 10 } wfSwservOutPhoneNumRemotePoolType OBJECT-TYPE SYNTAX INTEGER { dialondemand(1), bandwidthondemand(2), dialandbandwidth(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify the types of calls accepted by the remote router on this port. For example, if the port on the remote router resides in only a demand pool specify the port type for this phone number to be dialondemand." DEFVAL { dialandbandwidth } ::= { wfSwservOutPhoneNumEntry 11 } wfSwservOutPhoneNumConnectionType OBJECT-TYPE SYNTAX INTEGER { single(1), multiple(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify if this phone number can be used to receive a single call or multiple calls." DEFVAL { multiple } ::= { wfSwservOutPhoneNumEntry 12 } wfSwservOutPhoneNumChannelType OBJECT-TYPE SYNTAX INTEGER { bchannel(1), multirate(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of Channels used for the outgoing call." DEFVAL { bchannel } ::= { wfSwservOutPhoneNumEntry 13 } wfSwservOutPhoneNumAggrChanCnt OBJECT-TYPE SYNTAX INTEGER(2..23) ACCESS read-write STATUS mandatory DESCRIPTION "Multiplier for the Multirate call." ::= { wfSwservOutPhoneNumEntry 14 } wfSwservOutPhoneNumPrefix OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Phone number prefix such as hayes dial command." ::= { wfSwservOutPhoneNumEntry 15 } wfSwservOutPhoneNumBearerService OBJECT-TYPE SYNTAX INTEGER { voice (1), data (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The Bearer service - data or voice, for ISDN call setup using this number" DEFVAL { data } ::= { wfSwservOutPhoneNumEntry 16 } wfSwservInPhoneNumTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSwservInPhoneNumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SWSERV Ingoing phone number list " ::= { wfCircuitOptsGroup 7 } wfSwservInPhoneNumEntry OBJECT-TYPE SYNTAX WfSwservInPhoneNumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Swserv_SYNC table" INDEX { wfSwservInPhoneNumIndex } ::= { wfSwservInPhoneNumTable 1 } WfSwservInPhoneNumEntry ::= SEQUENCE { wfSwservInPhoneNumDelete INTEGER, wfSwservInPhoneNumIndex INTEGER, wfSwservInPhoneNumRmtStationNum DisplayString, wfSwservInPhoneNumSubAddr DisplayString, wfSwservInPhoneNumDelimiter DisplayString, wfSwservInPhoneNumType INTEGER, wfSwservInPhoneNumTypeofNum INTEGER, wfSwservInPhoneNumPlan INTEGER, wfSwservInPhoneNumCct INTEGER } wfSwservInPhoneNumDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Delete this phone number from the list" DEFVAL { create } ::= { wfSwservInPhoneNumEntry 1 } wfSwservInPhoneNumIndex OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-only STATUS mandatory DESCRIPTION "a unique one up type number to create a list" ::= { wfSwservInPhoneNumEntry 2 } wfSwservInPhoneNumRmtStationNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "the station address (phone number) of the remote system" ::= { wfSwservInPhoneNumEntry 3 } wfSwservInPhoneNumSubAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for Swserv phone numbers, the sub address portion" ::= { wfSwservInPhoneNumEntry 4 } wfSwservInPhoneNumDelimiter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "for Swserv phone numbers, the delimiter portion" ::= { wfSwservInPhoneNumEntry 5 } wfSwservInPhoneNumType OBJECT-TYPE SYNTAX INTEGER { dial(1), isdn(2) } ACCESS read-write STATUS mandatory DESCRIPTION "phone number types; ISDN types or Modem Dial types" DEFVAL { dial } ::= { wfSwservInPhoneNumEntry 6 } wfSwservInPhoneNumTypeofNum OBJECT-TYPE SYNTAX INTEGER { unknown(1), international(16), national(32), specific(48), subscriber(64), abbreviated(96) } ACCESS read-write STATUS mandatory DESCRIPTION "We will AND this field with 0x0xFFF0 before using it." DEFVAL { unknown } ::= { wfSwservInPhoneNumEntry 7 } wfSwservInPhoneNumPlan OBJECT-TYPE SYNTAX INTEGER { unknown(16), telephony(01), x121(03), telex(04), standard(08), private(09) } ACCESS read-write STATUS mandatory DESCRIPTION "0x0F before using it." DEFVAL { unknown } ::= { wfSwservInPhoneNumEntry 8 } wfSwservInPhoneNumCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies which circuit should be used when performing Callback. If Null, Authentication must complete before Callback can occur." ::= { wfSwservInPhoneNumEntry 9 } wfCctOptsBrBuPppFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsBrBuPppFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dial Backup PPP Datalink filter table" ::= { wfCircuitOptsGroup 8 } wfCctOptsBrBuPppFilterEntry OBJECT-TYPE SYNTAX WfCctOptsBrBuPppFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsBrBuPppFilterTable." INDEX { wfCctOptsBrBuPppFilterCct, wfCctOptsBrBuPppFilterRuleNumber, wfCctOptsBrBuPppFilterFragment } ::= { wfCctOptsBrBuPppFilterTable 1 } WfCctOptsBrBuPppFilterEntry ::= SEQUENCE { wfCctOptsBrBuPppFilterCreate INTEGER, wfCctOptsBrBuPppFilterEnable INTEGER, wfCctOptsBrBuPppFilterState INTEGER, wfCctOptsBrBuPppFilterCounter Counter, wfCctOptsBrBuPppFilterDefinition OCTET STRING, wfCctOptsBrBuPppFilterReserved INTEGER, wfCctOptsBrBuPppFilterCct INTEGER, wfCctOptsBrBuPppFilterRuleNumber INTEGER, wfCctOptsBrBuPppFilterFragment INTEGER, wfCctOptsBrBuPppFilterName DisplayString } wfCctOptsBrBuPppFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfCctOptsBrBuPppFilterEntry 1 } wfCctOptsBrBuPppFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfCctOptsBrBuPppFilterEntry 2 } wfCctOptsBrBuPppFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfCctOptsBrBuPppFilterEntry 3 } wfCctOptsBrBuPppFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfCctOptsBrBuPppFilterEntry 4 } wfCctOptsBrBuPppFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfCctOptsBrBuPppFilterEntry 5 } wfCctOptsBrBuPppFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfCctOptsBrBuPppFilterEntry 6 } wfCctOptsBrBuPppFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the CctBridge Cct to which the filter is applied." ::= { wfCctOptsBrBuPppFilterEntry 7 } wfCctOptsBrBuPppFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfCctOptsBrBuPppFilterEntry 8 } wfCctOptsBrBuPppFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfCctOptsBrBuPppFilterEntry 9 } wfCctOptsBrBuPppFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfCctOptsBrBuPppFilterEntry 10 } wfCctOptsIpBuPppFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsIpBuPppFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Filter Table for Backup Lines" ::= { wfCircuitOptsGroup 9 } wfCctOptsIpBuPppFilterEntry OBJECT-TYPE SYNTAX WfCctOptsIpBuPppFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsIpBuPppFilterTable." INDEX { wfCctOptsIpBuPppFilterCct, wfCctOptsIpBuPppFilterRuleNumber, wfCctOptsIpBuPppFilterFragment } ::= { wfCctOptsIpBuPppFilterTable 1 } WfCctOptsIpBuPppFilterEntry ::= SEQUENCE { wfCctOptsIpBuPppFilterCreate INTEGER, wfCctOptsIpBuPppFilterEnable INTEGER, wfCctOptsIpBuPppFilterState INTEGER, wfCctOptsIpBuPppFilterCounter Counter, wfCctOptsIpBuPppFilterDefinition OCTET STRING, wfCctOptsIpBuPppFilterReserved INTEGER, wfCctOptsIpBuPppFilterCct INTEGER, wfCctOptsIpBuPppFilterRuleNumber INTEGER, wfCctOptsIpBuPppFilterFragment INTEGER, wfCctOptsIpBuPppFilterName DisplayString } wfCctOptsIpBuPppFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfCctOptsIpBuPppFilterEntry 1 } wfCctOptsIpBuPppFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfCctOptsIpBuPppFilterEntry 2 } wfCctOptsIpBuPppFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfCctOptsIpBuPppFilterEntry 3 } wfCctOptsIpBuPppFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfCctOptsIpBuPppFilterEntry 4 } wfCctOptsIpBuPppFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfCctOptsIpBuPppFilterEntry 5 } wfCctOptsIpBuPppFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfCctOptsIpBuPppFilterEntry 6 } wfCctOptsIpBuPppFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the CctBridge Cct to which the filter is applied." ::= { wfCctOptsIpBuPppFilterEntry 7 } wfCctOptsIpBuPppFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfCctOptsIpBuPppFilterEntry 8 } wfCctOptsIpBuPppFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfCctOptsIpBuPppFilterEntry 9 } wfCctOptsIpBuPppFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfCctOptsIpBuPppFilterEntry 10 } wfCctOptsCngcTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsCngcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BNX Switch congestion control Table" ::= { wfCircuitOptsGroup 10 } wfCctOptsCngcEntry OBJECT-TYPE SYNTAX WfCctOptsCngcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in WfCctOptsCngcTable." INDEX { wfCctOptsCngcCct } ::= { wfCctOptsCngcTable 1 } WfCctOptsCngcEntry ::= SEQUENCE { wfCctOptsCngcDelete INTEGER, wfCctOptsCngcDisable INTEGER, wfCctOptsCngcCct INTEGER, wfCctOptsCngcSmdsDiscardability INTEGER, wfCctOptsCngcCfgSwtxqThreshold INTEGER, wfCctOptsCngcSwtxqThreshold INTEGER, wfCctOptsCngcCngLevel0Threshold INTEGER, wfCctOptsCngcCngLevel1Threshold INTEGER, wfCctOptsCngcCngLevel2Threshold INTEGER, wfCctOptsCngcLinkType INTEGER, wfCctOptsCngcTrfPriorityEnable INTEGER, wfCctOptsCngcPortIPTrfPriority INTEGER, wfCctOptsCngcPortTrfDiscardLvl INTEGER, wfCctOptsCngcPortTrfPriority INTEGER, wfCctOptsCngcCfgHwtxQThreshold INTEGER, wfCctOptsCngcHwtxQThreshold INTEGER, wfCctOptsCngcSndTrapForPktsDropped INTEGER, wfCctOptsCngcCfgQp0Threshold INTEGER, wfCctOptsCngcQp0Threshold INTEGER, wfCctOptsCngcQp0CngLvl0Threshold INTEGER, wfCctOptsCngcQp0CngLvl1Threshold INTEGER, wfCctOptsCngcQp0CngLvl2Threshold INTEGER, wfCctOptsCngcQp0PktsServPriNxtQ INTEGER, wfCctOptsCngcCfgQp1Threshold INTEGER, wfCctOptsCngcQp1Threshold INTEGER, wfCctOptsCngcQp1CngLvl0Threshold INTEGER, wfCctOptsCngcQp1CngLvl1Threshold INTEGER, wfCctOptsCngcQp1CngLvl2Threshold INTEGER, wfCctOptsCngcQp1PktsServPriNxtQ INTEGER, wfCctOptsCngcCfgQp2Threshold INTEGER, wfCctOptsCngcQp2Threshold INTEGER, wfCctOptsCngcQp2CngLvl0Threshold INTEGER, wfCctOptsCngcQp2CngLvl1Threshold INTEGER, wfCctOptsCngcQp2CngLvl2Threshold INTEGER, wfCctOptsCngcQp2PktsServPriNxtQ INTEGER, wfCctOptsCngcCfgQp3Threshold INTEGER, wfCctOptsCngcQp3Threshold INTEGER, wfCctOptsCngcQp3CngLvl0Threshold INTEGER, wfCctOptsCngcQp3CngLvl1Threshold INTEGER, wfCctOptsCngcQp3CngLvl2Threshold INTEGER, wfCctOptsCngcPriority0TxPkts Counter, wfCctOptsCngcPriority0TxOctets Counter, wfCctOptsCngcPriority0DropPkts Counter, wfCctOptsCngcPriority0DropOctets Counter, wfCctOptsCngcPriority1TxPkts Counter, wfCctOptsCngcPriority1TxOctets Counter, wfCctOptsCngcPriority1DropPkts Counter, wfCctOptsCngcPriority1DropOctets Counter, wfCctOptsCngcPriority2TxPkts Counter, wfCctOptsCngcPriority2TxOctets Counter, wfCctOptsCngcPriority2DropPkts Counter, wfCctOptsCngcPriority2DropOctets Counter, wfCctOptsCngcPriority3TxPkts Counter, wfCctOptsCngcPriority3TxOctets Counter, wfCctOptsCngcPriority3DropPkts Counter, wfCctOptsCngcPriority3DropOctets Counter, wfCctOptsCngcTxFRNonDePkts Counter, wfCctOptsCngcTxFRNonDeOctets Counter, wfCctOptsCngcTxFRDePkts Counter, wfCctOptsCngcTxFRDeOctets Counter, wfCctOptsCngcDropFRNonDePkts Counter, wfCctOptsCngcDropFRNonDeOctets Counter, wfCctOptsCngcDropFRDePkts Counter, wfCctOptsCngcDropFRDeOctets Counter, wfCctOptsCngcFRSetFecnPkts Counter, wfCctOptsCngcFRSetFecnOctets Counter, wfCctOptsCngcFRSetBecnPkts Counter, wfCctOptsCngcFRSetBecnOctets Counter, wfCctOptsCngcDropNonFRPkts Counter, wfCctOptsCngcDropNonFROctets Counter, wfCctOptsCngcLogPower INTEGER } wfCctOptsCngcDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the congestion control entry CNGC_CREATED - congestion control entry exists CNGC_DELETED - congestion control entry does not exist and can be deleted. " DEFVAL { created } ::= { wfCctOptsCngcEntry 1 } wfCctOptsCngcDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether congestion control is enabled or disabled on the circuit" DEFVAL { enabled } ::= { wfCctOptsCngcEntry 2 } wfCctOptsCngcCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit number of the circuit to which the entry is applied" ::= { wfCctOptsCngcEntry 3 } wfCctOptsCngcSmdsDiscardability OBJECT-TYPE SYNTAX INTEGER { datagram(1), frde(2), frnde(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines how SMDS packets entering BNX network through SMDS SSI and SMDS SNI interfaces should be treated at this circuit during congestion for dropping. This is applicable only on the internodal links. CNGC_FRDE - treat this like Frame relay DE frame. CNGC_FRNDE - treat this like Frame Relay non DE frame CNGC_DATAGRAM - treat this like a datagram packet. " DEFVAL { datagram } ::= { wfCctOptsCngcEntry 4 } wfCctOptsCngcCfgSwtxqThreshold OBJECT-TYPE SYNTAX INTEGER(1..256) ACCESS read-write STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines the user configured software transmit queue threshold. If this is set to NULL_VAL then the switch calculates the default value depending on the media and uses the default value. The default value is recommended." ::= { wfCctOptsCngcEntry 5 } wfCctOptsCngcSwtxqThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines the software transmit queue threshold in use. Switch updates this attribute to inform user what the current software transmit queue threshold is." ::= { wfCctOptsCngcEntry 6 } wfCctOptsCngcCngLevel0Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines the Software Transmit Queue congestion level 0 threshold as a percentage of the Software Transmit Queue Threshold. The default value is recommended." DEFVAL { 25 } ::= { wfCctOptsCngcEntry 7 } wfCctOptsCngcCngLevel1Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines the Software Transmit Queue congestion level 1 threshold as a percentage of the Software Transmit Queue Threshold. The default value is recommended. wfCctOptsCngcCngLevel1Threshold should be more than wfCctOptsCngcCngLevel0Threshold, otherwise there will be no congestion level 1." DEFVAL { 50 } ::= { wfCctOptsCngcEntry 8 } wfCctOptsCngcCngLevel2Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This is obsolete in V5.0 and upwards. Defines the Software Transmit Queue congestion level 2 threshold as a percentage of the Software Transmit Queue Threshold. The default value is recommended. wfCctOptsCngcCngLevel2Threshold should be more than wfCctOptsCngcCngLevel1Threshold, otherwise there will be no congestion level 2." DEFVAL { 75 } ::= { wfCctOptsCngcEntry 9 } wfCctOptsCngcLinkType OBJECT-TYPE SYNTAX INTEGER { access(1), nodal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether the circuit is an access link or inter-nodal link (trunk). Traffic monitoring, traffic priority determination, traffic discardability level determination are done at access link and each incoming packet on an access link is tagged with the information. Inter-nodal link (trunk) uses the above tagged information in packets for priority queueing and discarding packets during congestion. WARNING - It is important to set the appropriate link type for this attribute otherwise congestion control will not work. The default value for this attribute is access link. This attribute value must be changed to CNGC_LINK_INTER_NODAL for inter-nodal link(trunk)." DEFVAL { access } ::= { wfCctOptsCngcEntry 10 } wfCctOptsCngcTrfPriorityEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether traffic prioritization is enabled or disabled on the circuit." DEFVAL { disabled } ::= { wfCctOptsCngcEntry 11 } wfCctOptsCngcPortIPTrfPriority OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the traffic priority for transmitting Non Frame Relay or SMDS traffic on this port. CNGC_IPPRIORITY_TWO - Default Value Set all non FR or SMDS user traffic packets to priority 2. CNGC_IPPRIORITY_ONE - Set all non FR or SMDS packets to priority 1. CNGC_IPPRIORITY_TWO - Set all non FR or SMDS packets to priority 2. CNGC_IPPRIORITY_THREE - Set all non FR or SMDS packets to priority 3." DEFVAL { two } ::= { wfCctOptsCngcEntry 12 } wfCctOptsCngcPortTrfDiscardLvl OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), four(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines at what congestion level the incoming packets on this port should be discarded in the network. CNGC_DISCARD_AT_LVL_TWO - Discard FR DE packets at level 2, discard FR non DE packets at level 4, discard SMDS packets at level 3, discard IP packets at level 3. Default value CNGC_DISCARD_AT_LVL_ONE - discard all at level 1 CNGC_DISCARD_AT_LVL_TWO - discard all at level 2 CNGC_DISCARD_AT_LVL_THREE - discard all at level 3 CNGC_DISCARD_AT_LVL_FOUR - discard all at level 4" DEFVAL { two } ::= { wfCctOptsCngcEntry 13 } wfCctOptsCngcPortTrfPriority OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the traffic priority level of all the incoming packets on this port. CNGC_PRIORITY_TWO - Default value Set all incoming user traffic packets to priority 2. CNGC_PRIORITY_ONE - Set all incoming packets to priority 1. CNGC_PRIORITY_TWO - Set all incoming packets to priority 2. CNGC_PRIORITY_THREE - Set all incoming packets to priority 3. Priority 0 is reserved for network critical packets like OSPF, FR LMI and SMDS heartbeat, Cross Net polling and is not available for user traffic." DEFVAL { two } ::= { wfCctOptsCngcEntry 14 } wfCctOptsCngcCfgHwtxQThreshold OBJECT-TYPE SYNTAX INTEGER(1..64) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the user configured hardware transmit queue threshold. NULL_VAL - Switch calculates the appropriate value based on system resources and uses the value. This is recommended. CNGC_HWTXQ_MINIMUM - minimum value to be used. CNGC_HWTXQ_MAXIMUM - maximum value to be used." ::= { wfCctOptsCngcEntry 15 } wfCctOptsCngcHwtxQThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current hardware queue threshold" ::= { wfCctOptsCngcEntry 16 } wfCctOptsCngcSndTrapForPktsDropped OBJECT-TYPE SYNTAX INTEGER(100..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "Switch sends a congestion notification trap for every wfCctOptsCngcSndTrapForPktsDropped number of packets dropped." DEFVAL { 100000 } ::= { wfCctOptsCngcEntry 17 } wfCctOptsCngcCfgQp0Threshold OBJECT-TYPE SYNTAX INTEGER(1..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Priority 0 queue threshold NULL_VAL - Switch calculates the appropriate value based on system resources and uses the value. This is recommended." ::= { wfCctOptsCngcEntry 18 } wfCctOptsCngcQp0Threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current Priority 0 queue threshold" ::= { wfCctOptsCngcEntry 19 } wfCctOptsCngcQp0CngLvl0Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 0 queue congestion level 0 threshold as a percentage of priority 0 queue threshold." DEFVAL { 25 } ::= { wfCctOptsCngcEntry 20 } wfCctOptsCngcQp0CngLvl1Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 0 queue congestion level 1 threshold as a percentage of priority 0 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp0CngLvl0Threshold, otherwise there will be no priority 0 queue congestion level 1." DEFVAL { 50 } ::= { wfCctOptsCngcEntry 21 } wfCctOptsCngcQp0CngLvl2Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 0 queue congestion level 2 threshold as a percentage of priority 0 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp0CngLvl1Threshold, otherwise there will be no priority 0 queue congestion level 2." DEFVAL { 75 } ::= { wfCctOptsCngcEntry 22 } wfCctOptsCngcQp0PktsServPriNxtQ OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the number of priority 0 queue packets to be served prior to serving each priority 1 queue packet. If priority 0 queue is empty then priority 1 queue packets are served." DEFVAL { 2 } ::= { wfCctOptsCngcEntry 23 } wfCctOptsCngcCfgQp1Threshold OBJECT-TYPE SYNTAX INTEGER(1..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Priority 1 queue threshold NULL_VAL - Switch calculates the appropriate value based on system resources and uses the value. This is recommended." ::= { wfCctOptsCngcEntry 24 } wfCctOptsCngcQp1Threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current Priority 0 queue threshold" ::= { wfCctOptsCngcEntry 25 } wfCctOptsCngcQp1CngLvl0Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 1 queue congestion level 0 threshold as a percentage of priority 1 queue threshold." DEFVAL { 25 } ::= { wfCctOptsCngcEntry 26 } wfCctOptsCngcQp1CngLvl1Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 1 queue congestion level 1 threshold as a percentage of priority 1 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp1CngLvl0Threshold, otherwise there will be no priority 1 queue congestion level 1." DEFVAL { 50 } ::= { wfCctOptsCngcEntry 27 } wfCctOptsCngcQp1CngLvl2Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 1 queue congestion level 2 threshold as a percentage of priority 1 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp1CngLvl1Threshold, otherwise there will be no priority 1 queue congestion level 2." DEFVAL { 75 } ::= { wfCctOptsCngcEntry 28 } wfCctOptsCngcQp1PktsServPriNxtQ OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the number of priority 1 queue packets to be served prior to serving each priority 2 queue packet. If priority 1 queue is empty then priority 2 queue packets are served." DEFVAL { 2 } ::= { wfCctOptsCngcEntry 29 } wfCctOptsCngcCfgQp2Threshold OBJECT-TYPE SYNTAX INTEGER(1..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Priority 2 queue threshold NULL_VAL - Switch calculates the appropriate value based on system resources and uses the value. This is recommended." ::= { wfCctOptsCngcEntry 30 } wfCctOptsCngcQp2Threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current Priority 0 queue threshold" ::= { wfCctOptsCngcEntry 31 } wfCctOptsCngcQp2CngLvl0Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 2 queue congestion level 0 threshold as a percentage of priority 2 queue threshold." DEFVAL { 25 } ::= { wfCctOptsCngcEntry 32 } wfCctOptsCngcQp2CngLvl1Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 2 queue congestion level 1 threshold as a percentage of priority 2 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp2CngLvl0Threshold, otherwise there will be no priority 2 queue congestion level 1." DEFVAL { 50 } ::= { wfCctOptsCngcEntry 33 } wfCctOptsCngcQp2CngLvl2Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 2 queue congestion level 2 threshold as a percentage of priority 2 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp2CngLvl1Threshold, otherwise there wil be no priority 2 queue congestion level 2." DEFVAL { 75 } ::= { wfCctOptsCngcEntry 34 } wfCctOptsCngcQp2PktsServPriNxtQ OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the number of priority 2 queue packets to be served prior to serving each priority 3 queue packet. If priority 2 queue is empty then priority 3 queue packets are served." DEFVAL { 2 } ::= { wfCctOptsCngcEntry 35 } wfCctOptsCngcCfgQp3Threshold OBJECT-TYPE SYNTAX INTEGER(1..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the Priority 3 queue threshold NULL_VAL - Switch calculates the appropriate value based on system resources and uses the value. This is recommended." ::= { wfCctOptsCngcEntry 36 } wfCctOptsCngcQp3Threshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current Priority 3 queue threshold" ::= { wfCctOptsCngcEntry 37 } wfCctOptsCngcQp3CngLvl0Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 3 queue congestion level 0 threshold as a percentage of priority 3 queue threshold." DEFVAL { 25 } ::= { wfCctOptsCngcEntry 38 } wfCctOptsCngcQp3CngLvl1Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 3 queue congestion level 1 threshold as a percentage of priority 3 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp3CngLvl0Threshold, otherwise there will be no priority 3 queue congestion level 1." DEFVAL { 50 } ::= { wfCctOptsCngcEntry 39 } wfCctOptsCngcQp3CngLvl2Threshold OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Defines priority 3 queue congestion level 2 threshold as a percentage of priority 3 queue threshold. The value of this attribute should be greater than wfCctOptsCngcQp3CngLvl1Threshold, otherwise there will be no priority 3 queue congestion level 2." DEFVAL { 75 } ::= { wfCctOptsCngcEntry 40 } wfCctOptsCngcPriority0TxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 0 packets transmitted" ::= { wfCctOptsCngcEntry 41 } wfCctOptsCngcPriority0TxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 0 Octets transmitted" ::= { wfCctOptsCngcEntry 42 } wfCctOptsCngcPriority0DropPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 0 packets dropped */" ::= { wfCctOptsCngcEntry 43 } wfCctOptsCngcPriority0DropOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 0 octets dropped" ::= { wfCctOptsCngcEntry 44 } wfCctOptsCngcPriority1TxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 1 packets transmitted" ::= { wfCctOptsCngcEntry 45 } wfCctOptsCngcPriority1TxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 1 Octets transmitted" ::= { wfCctOptsCngcEntry 46 } wfCctOptsCngcPriority1DropPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 1 packets dropped */" ::= { wfCctOptsCngcEntry 47 } wfCctOptsCngcPriority1DropOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 1 octets dropped" ::= { wfCctOptsCngcEntry 48 } wfCctOptsCngcPriority2TxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 2 packets transmitted" ::= { wfCctOptsCngcEntry 49 } wfCctOptsCngcPriority2TxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 2 Octets transmitted" ::= { wfCctOptsCngcEntry 50 } wfCctOptsCngcPriority2DropPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 2 packets dropped */" ::= { wfCctOptsCngcEntry 51 } wfCctOptsCngcPriority2DropOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 2 octets dropped" ::= { wfCctOptsCngcEntry 52 } wfCctOptsCngcPriority3TxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 3 packets transmitted" ::= { wfCctOptsCngcEntry 53 } wfCctOptsCngcPriority3TxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 3 Octets transmitted" ::= { wfCctOptsCngcEntry 54 } wfCctOptsCngcPriority3DropPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 3 packets dropped */" ::= { wfCctOptsCngcEntry 55 } wfCctOptsCngcPriority3DropOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of priority 3 octets dropped" ::= { wfCctOptsCngcEntry 56 } wfCctOptsCngcTxFRNonDePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frame Relay non DE packets transmitted" ::= { wfCctOptsCngcEntry 57 } wfCctOptsCngcTxFRNonDeOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frame Relay non DE octets transmitted" ::= { wfCctOptsCngcEntry 58 } wfCctOptsCngcTxFRDePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frame Relay DE packets transmitted" ::= { wfCctOptsCngcEntry 59 } wfCctOptsCngcTxFRDeOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frame Relay DE octets transmitted" ::= { wfCctOptsCngcEntry 60 } wfCctOptsCngcDropFRNonDePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Frame Relay non DE packets dropped" ::= { wfCctOptsCngcEntry 61 } wfCctOptsCngcDropFRNonDeOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay non DE octets dropped" ::= { wfCctOptsCngcEntry 62 } wfCctOptsCngcDropFRDePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay DE packets dropped" ::= { wfCctOptsCngcEntry 63 } wfCctOptsCngcDropFRDeOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay DE octets dropped" ::= { wfCctOptsCngcEntry 64 } wfCctOptsCngcFRSetFecnPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay packets in which this link set FECN" ::= { wfCctOptsCngcEntry 65 } wfCctOptsCngcFRSetFecnOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay octets in which this link set FECN" ::= { wfCctOptsCngcEntry 66 } wfCctOptsCngcFRSetBecnPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay frames in which this link set BECN" ::= { wfCctOptsCngcEntry 67 } wfCctOptsCngcFRSetBecnOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Frame Relay octets in which this link set BECN" ::= { wfCctOptsCngcEntry 68 } wfCctOptsCngcDropNonFRPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Non Frame Relay packets dropped" ::= { wfCctOptsCngcEntry 69 } wfCctOptsCngcDropNonFROctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Non Frame Relay octets dropped" ::= { wfCctOptsCngcEntry 70 } wfCctOptsCngcLogPower OBJECT-TYPE SYNTAX INTEGER(10..31) ACCESS read-write STATUS mandatory DESCRIPTION "This number specifies that the following log events: 1. Dropped DE Frame. 2. Dropped Non DE Frames. 3. Set DE Frames. 4. Set FECN/BECN. be logged once every (X) occurances. Where (X) = Base 2 raised to the power. The user specifies the power by setting this wfCctOptsCngcLogPower mib attribute. For example, setting wfCctOptsCngcLogPower to a value of 10 means that a log message will be logged once every 1024 occurances. 1024 = (2 ^ wfCctOptsCngcLogPower) or (2 raised to 10th power). Legal values for this attribute ranges from 10 to 31. This translates to 2^10 (1024) through 2^31 (2147483648). Default: 2^31." DEFVAL { 31 } ::= { wfCctOptsCngcEntry 71 } wfSwservTODTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSwservTODEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SWSERV circuit time of day MIB" ::= { wfCircuitOptsGroup 11 } wfSwservTODEntry OBJECT-TYPE SYNTAX WfSwservTODEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the wfSwservTODTable" INDEX { wfSwservTODCct, wfSwservTODIndex } ::= { wfSwservTODTable 1 } WfSwservTODEntry ::= SEQUENCE { wfSwservTODDelete INTEGER, wfSwservTODCct INTEGER, wfSwservTODIndex INTEGER, wfSwservTODType INTEGER, wfSwservTODStartTime INTEGER, wfSwservTODEndTime INTEGER, wfSwservTODInactivityEnable INTEGER, wfSwservTODAvailabilityMode INTEGER, wfSwservTODStandbyFailBackMode INTEGER, wfSwservTODStandbyFailBackTime INTEGER } wfSwservTODDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Delete time of day instance from the list for this circuit" DEFVAL { create } ::= { wfSwservTODEntry 1 } wfSwservTODCct OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-only STATUS mandatory DESCRIPTION "CCT number for time of day instance" ::= { wfSwservTODEntry 2 } wfSwservTODIndex OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-only STATUS mandatory DESCRIPTION "a unique number to specify instance" ::= { wfSwservTODEntry 3 } wfSwservTODType OBJECT-TYPE SYNTAX INTEGER { sun(1), mon(2), tues(3), wed(4), thurs(5), fri(6), sat(7), weekday(8), weekend(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of TOD Configuration" DEFVAL { weekday } ::= { wfSwservTODEntry 4 } wfSwservTODStartTime OBJECT-TYPE SYNTAX INTEGER(0..2400) ACCESS read-write STATUS mandatory DESCRIPTION "Start Time of day allow a line to dial ( HHMM format )" DEFVAL { 0000 } ::= { wfSwservTODEntry 5 } wfSwservTODEndTime OBJECT-TYPE SYNTAX INTEGER(0000..2400) ACCESS read-write STATUS mandatory DESCRIPTION "End Time of day connection can be active for specified circuit ( HHMM format )" DEFVAL { 2400 } ::= { wfSwservTODEntry 6 } wfSwservTODInactivityEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity Timer if disabled the inactivity timer is ignored during this time period, if enabled the connection is brought down due to inactivity. If this parameter is DISABLED, the circuit will be established automatically during the configured times, regardless of the Availability Mode." DEFVAL { disabled } ::= { wfSwservTODEntry 7 } wfSwservTODAvailabilityMode OBJECT-TYPE SYNTAX INTEGER { available(1), notavailable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this field to AVAILABLE to allow the circuit to be established between the configured start and end times. Set it to NOT AVAILABLE to prevent the circuit from being established during those times. Inactivity Timeout must be ENABLED for Availability Mode to have any effect. If Inactivity Timeout is DISABLED, the circuit will be established automatically during the configured times, regardless of the Availability Mode. " DEFVAL { available } ::= { wfSwservTODEntry 8 } wfSwservTODStandbyFailBackMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates if failback mode for this time of day range. When set to automatic circuit will failback subject to the failback timer. When set to manual circuit will not failback." DEFVAL { automatic } ::= { wfSwservTODEntry 9 } wfSwservTODStandbyFailBackTime OBJECT-TYPE SYNTAX INTEGER (0..1439) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates number of minutes to wait after the primary is observed as active before deactivating the standby. Default value of 0 disables failback timer." DEFVAL { 0 } ::= { wfSwservTODEntry 10 } wfDemandCctGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF WfDemandCctGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of demand circuits groups defined over switched services" ::= { wfCircuitOptsGroup 12 } wfDemandCctGrpEntry OBJECT-TYPE SYNTAX WfDemandCctGrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry format for the table of demand circuit group options" INDEX { wfDmdCctGroupNum, wfDmdCctGroupPoolId } ::= { wfDemandCctGrpTable 1 } WfDemandCctGrpEntry ::= SEQUENCE { wfDmdCctGroupDelete INTEGER, wfDmdCctGroupNum INTEGER, wfDmdCctGroupPoolId INTEGER, wfDmdCctGroupNumofCcts INTEGER, wfDmdCctGroupIPEnable INTEGER, wfDmdCctGroupIPUnnumAssoc IpAddress, wfDmdCctGroupRIPEnable INTEGER, wfDmdCctGroupOSPFEnable INTEGER, wfDmdCctGroupIPXEnable INTEGER, wfDmdCctGroupBridgeEnable INTEGER, wfDmdCctGroupCctList OCTET STRING, wfDmdCctGroupIPXRouting INTEGER, wfDmdCctGroupIPXWANEnable INTEGER, wfDmdCctGroupRadiusEnable INTEGER } wfDmdCctGroupDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Creation and deletion flag" DEFVAL { created } ::= { wfDemandCctGrpEntry 1 } wfDmdCctGroupNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit Number" ::= { wfDemandCctGrpEntry 2 } wfDmdCctGroupPoolId OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Demand pool id used by this demand circuit group" ::= { wfDemandCctGrpEntry 3 } wfDmdCctGroupNumofCcts OBJECT-TYPE SYNTAX INTEGER(1..124) ACCESS read-write STATUS mandatory DESCRIPTION "Demand pool id used by this demand circuit group" DEFVAL { 1 } ::= { wfDemandCctGrpEntry 4 } wfDmdCctGroupIPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IP unnumbered enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 5 } wfDmdCctGroupIPUnnumAssoc OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The associated IP address used by unnumbered demand circuit group every demand circuit in this demand circuit group uses the same associated IP address." ::= { wfDemandCctGrpEntry 6 } wfDmdCctGroupRIPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "RIP enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 7 } wfDmdCctGroupOSPFEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OSPF enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 8 } wfDmdCctGroupIPXEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IPX unnumbered enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 9 } wfDmdCctGroupBridgeEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Bridge enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 10 } wfDmdCctGroupCctList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "List of demand circuits that are members of this group" ::= { wfDemandCctGrpEntry 11 } wfDmdCctGroupIPXRouting OBJECT-TYPE SYNTAX INTEGER { rip(1), nlsp(2), ripnlsp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "IPX routing protocol used for specified demand circuit group" DEFVAL { rip } ::= { wfDemandCctGrpEntry 12 } wfDmdCctGroupIPXWANEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IPXWAN enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 13 } wfDmdCctGroupRadiusEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Radius enabled or disabled for specified demand circuit group" DEFVAL { disabled } ::= { wfDemandCctGrpEntry 14 } END -- Wellfleet-CCTOPTS-MIB