The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
The size of the largest packet which can be sent/received
on the interface, specified in octets. For interfaces that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent on the
interface.
Size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
View at oid-info.com
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
The size of the largest packet which can be sent/received
on the interface, specified in octets. For interfaces that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent on the
interface.
ifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 }
ifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 }
For more information see IETF - RFC 1213 (03/1991)
ifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 }
ifMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.2.2.1.1 | ifIndex | 0 | 0 | Unique value for each interface |
| 1.3.6.1.2.1.2.2.1.2 | ifDescr | 0 | 0 | Textual string containing information about the interface. This string should include the name of the manufacturer, the product… |
| 1.3.6.1.2.1.2.2.1.3 | ifType | 276 | 276 | Type of interface, distinguished according to the physical/link protocol(s) immediately 'below' the network layer in the protoc… |
| 1.3.6.1.2.1.2.2.1.5 | ifSpeed | 0 | 0 | Estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those wh… |
| 1.3.6.1.2.1.2.2.1.6 | ifPhysAddress, ifPhyAddress | 0 | 0 | Interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do … |
| 1.3.6.1.2.1.2.2.1.7 | ifAdminStatus | 0 | 0 | Desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ifOperStatus | 0 | 0 | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ifLastChange | 0 | 0 | Value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to t… |
| 1.3.6.1.2.1.2.2.1.10 | ifInOctets | 0 | 0 | Total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ifInUcastPkts | 0 | 0 | Number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ifInNUcastPkts | 0 | 0 | Number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets livered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ifInDiscards | 0 | 0 | Number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deli… |
| 1.3.6.1.2.1.2.2.1.14 | ifInErrors | 0 | 0 | Number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ifInUnknownProtos | 0 | 0 | Number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ifOutOctets | 0 | 0 | Total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ifOutUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those t… |
| 1.3.6.1.2.1.2.2.1.18 | ifOutNUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or … |
| 1.3.6.1.2.1.2.2.1.19 | ifOutDiscards | 0 | 0 | Number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being tra… |
| 1.3.6.1.2.1.2.2.1.20 | ifOutErrors | 0 | 0 | Number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ifOutQLen | 0 | 0 | Length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ifSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interfa… |
| 1.3.6.1.2.1.2.2.1.27 | ifStateChangeTrapEnable | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.29 | ifClearStats | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.30 | ifClearStatsTime | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.31 | ifErrorRateTrapEnable | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.32 | ifErrorRateInterval | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.33 | ifErrorInLowThreshold | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.34 | ifErrorInHighThreshold | 0 | 0 | ifErrorInHighthreshold |
| 1.3.6.1.2.1.2.2.1.35 | ifErrorOutLowThreshold | 0 | 0 | None |
| 1.3.6.1.2.1.2.2.1.36 | ifErrorOutHighThreshold | 0 | 0 | ifErrorOutHighthreshold |
| 1.3.6.1.2.1.2.2.1.37 | ifErrType | 0 | 0 | None |