Reference record for OID 1.3.6.1.2.1.2.2.1.6


parent
1.3.6.1.2.1.2.2.1 (ifEntry)
node code
6
node names
  • ifPhysAddress
  • ifPhyAddress
  • dot oid
    1.3.6.1.2.1.2.2.1.6
    type
    OBJECT-TYPE
    asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) interface(2) ifTable(2) ifEntry(1) ifPhysAddress(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) interface(2) ifTable(2) ifEntry(1) ifPhyAddress(6)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) interfaces(2) ifTable(2) ifEntry(1) ifPhysAddress(6)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) interfaces(2) ifTable(2) ifEntry(1) ifPhyAddress(6)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) interface(2) ifTable(2) ifEntry(1) ifPhysAddress(6)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) interface(2) ifTable(2) ifEntry(1) ifPhyAddress(6)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) interfaces(2) ifTable(2) ifEntry(1) ifPhysAddress(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) interfaces(2) ifTable(2) ifEntry(1) ifPhyAddress(6)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/interface/ifTable/ifEntry/ifPhysAddress
  • /iso/identified-organization/dod/internet/mgmt/mib-2/interface/ifTable/ifEntry/ifPhyAddress
  • ...skipped...
  • /iso/org/dod/internet/mgmt/mib-2/interfaces/ifTable/ifEntry/ifPhysAddress
  • /iso/org/dod/internet/mgmt/mib-2/interfaces/ifTable/ifEntry/ifPhyAddress
  • /iso/org/dod/internet/mgmt/mib/interface/ifTable/ifEntry/ifPhysAddress
  • /iso/org/dod/internet/mgmt/mib/interface/ifTable/ifEntry/ifPhyAddress
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/interfaces/ifTable/ifEntry/ifPhysAddress
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/interfaces/ifTable/ifEntry/ifPhyAddress
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/2/2/1/6

    Description by circitor

    The interface's address at the protocol layer
    immediately `below' the network layer in the
    protocol stack. For interfaces which do not have
    such an address (e.g., a serial line), this object
    should contain an octet string of zero length.

    Parsed from file MRVINREACH.mib
    Module: MRVINREACH

    Description by cisco_v1

    The interface's address at its protocol sub-layer. For
    example, for an 802.x interface, this object normally
    contains a MAC address. The interface's media-specific MIB
    must define the bit and byte ordering and the format of the
    value of this object. For interfaces which do not have such
    an address (e.g., a serial line), this object should contain
    an octet string of zero length.

    Description by oid_info

    Interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
    View at oid-info.com

    Description by mibdepot

    The interface's address at the protocol layer
    immediately `below' the network layer in the
    protocol stack. For interfaces which do not have
    such an address (e.g., a serial line), this object
    should contain an octet string of zero length.

    Parsed from file msh100.mib.txt
    Company: None
    Module: LBMSH-MIB

    Description by cisco

    The interface's address at its protocol sub-layer. For
    example, for an 802.x interface, this object normally
    contains a MAC address. The interface's media-specific MIB
    must define the bit and byte ordering and the format of the
    value of this object. For interfaces which do not have such
    an address (e.g., a serial line), this object should contain
    an octet string of zero length.

    Information by circitor

    ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 }

    Information by cisco_v1

    ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 }

    Information by oid_info

    For more information see IETF - RFC 1213 (03/1991)

    Information by mibdepot

    ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 }

    Information by cisco

    ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (31)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.2.2.1.1 ifIndex 0 0 Unique value for each interface
    1.3.6.1.2.1.2.2.1.2 ifDescr 0 0 Textual string containing information about the interface. This string should include the name of the manufacturer, the product…
    1.3.6.1.2.1.2.2.1.3 ifType 276 276 Type of interface, distinguished according to the physical/link protocol(s) immediately 'below' the network layer in the protoc…
    1.3.6.1.2.1.2.2.1.4 ifMtu 0 0 Size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for…
    1.3.6.1.2.1.2.2.1.5 ifSpeed 0 0 Estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those wh…
    1.3.6.1.2.1.2.2.1.7 ifAdminStatus 0 0 Desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
    1.3.6.1.2.1.2.2.1.8 ifOperStatus 0 0 The current operational state of the interface.
    The testing(3) state indicates that no operational
    packets can be passed.
    1.3.6.1.2.1.2.2.1.9 ifLastChange 0 0 Value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to t…
    1.3.6.1.2.1.2.2.1.10 ifInOctets 0 0 Total number of octets received on the interface, including framing characters.
    1.3.6.1.2.1.2.2.1.11 ifInUcastPkts 0 0 Number of subnetwork-unicast packets delivered to a higher-layer protocol.
    1.3.6.1.2.1.2.2.1.12 ifInNUcastPkts 0 0 Number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets livered to a higher-layer protocol.
    1.3.6.1.2.1.2.2.1.13 ifInDiscards 0 0 Number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deli…
    1.3.6.1.2.1.2.2.1.14 ifInErrors 0 0 Number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
    1.3.6.1.2.1.2.2.1.15 ifInUnknownProtos 0 0 Number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
    1.3.6.1.2.1.2.2.1.16 ifOutOctets 0 0 Total number of octets transmitted out of the interface, including framing characters.
    1.3.6.1.2.1.2.2.1.17 ifOutUcastPkts 0 0 Total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those t…
    1.3.6.1.2.1.2.2.1.18 ifOutNUcastPkts 0 0 Total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or …
    1.3.6.1.2.1.2.2.1.19 ifOutDiscards 0 0 Number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being tra…
    1.3.6.1.2.1.2.2.1.20 ifOutErrors 0 0 Number of outbound packets that could not be transmitted because of errors.
    1.3.6.1.2.1.2.2.1.21 ifOutQLen 0 0 Length of the output packet queue (in packets).
    1.3.6.1.2.1.2.2.1.22 ifSpecific 0 0 A reference to MIB definitions specific to the
    particular media being used to realize the
    interface. For example, if the interfa…
    1.3.6.1.2.1.2.2.1.27 ifStateChangeTrapEnable 0 0 None
    1.3.6.1.2.1.2.2.1.29 ifClearStats 0 0 None
    1.3.6.1.2.1.2.2.1.30 ifClearStatsTime 0 0 None
    1.3.6.1.2.1.2.2.1.31 ifErrorRateTrapEnable 0 0 None
    1.3.6.1.2.1.2.2.1.32 ifErrorRateInterval 0 0 None
    1.3.6.1.2.1.2.2.1.33 ifErrorInLowThreshold 0 0 None
    1.3.6.1.2.1.2.2.1.34 ifErrorInHighThreshold 0 0 ifErrorInHighthreshold
    1.3.6.1.2.1.2.2.1.35 ifErrorOutLowThreshold 0 0 None
    1.3.6.1.2.1.2.2.1.36 ifErrorOutHighThreshold 0 0 ifErrorOutHighthreshold
    1.3.6.1.2.1.2.2.1.37 ifErrType 0 0 None