Reference record for OID 1.3.6.1.3.95.2


parent
1.3.6.1.3.95 (mplsTeMIB)
node code
2
node name
mplsTeObjects
dot oid
1.3.6.1.3.95.2
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95) mplsTeObjects(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeObjects
  • /iso/org/dod/internet/experimental/mplsTeMIB/mplsTeObjects
  • /iso/iso-identified-organization/dod/internet/experimental/mplsTeMIB/mplsTeObjects
    • iri by oid_info
    /ISO/Identified-Organization/6/1/3/95/2

    Information by circitor

    mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeMIB 2 }

    Information by cisco_v1

    mplsTeObjects   OBJECT IDENTIFIER ::= { mplsTeMIB 2 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeMIB 2 }

    Information by cisco

    mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeMIB 2 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.3)

    Internet Assigned Numbers Authority

    Children (12)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.95.2.0 mplsTeNotifyPrefix 4 4 None
    1.3.6.1.3.95.2.1 mplsTunnelIndexNext 1 1 This object contains the next appropriate value to
    be used for mplsTunnelIndex when creating entries
    in mplsTunnelTable. If the …
    1.3.6.1.3.95.2.2 mplsTunnelTable 1 38 The mplsTunnelTable allows new MPLS tunnels to be
    created between an LSR and a remote endpoint, and
    existing tunnels to be reconf…
    1.3.6.1.3.95.2.3 mplsTunnelHopListIndexNext 1 1 This object contains an appropriate value to be used
    for mplsTunnelHopListIndex when creating entries in
    the mplsTunnelHopTable. …
    1.3.6.1.3.95.2.4 mplsTunnelHopTable 1 17 The mplsTunnelHopTable is used to indicate the hops,
    strict or loose, for an MPLS tunnel defined in
    mplsTunnelTable, when it is e…
    1.3.6.1.3.95.2.5 mplsTunnelResourceIndexNext 1 1 This object contains the next appropriate value to
    be used for mplsTunnelResourceIndex when creating
    entries in the mplsTunnelRes…
    1.3.6.1.3.95.2.6 mplsTunnelResourceTable 1 11 The mplsTunnelResourceTable allows a manager to
    specify which resources are desired for an MPLS
    tunnel. This table also allows s…
    1.3.6.1.3.95.2.7 mplsTunnelARHopTable 1 10 The mplsTunnelARHopTable is used to indicate the
    hops, strict or loose, for an MPLS tunnel defined
    in mplsTunnelTable, as reporte…
    1.3.6.1.3.95.2.8 mplsTunnelCHopTable 1 10 The mplsTunnelCHopTable is used to indicate the
    hops, strict or loose, for an MPLS tunnel defined
    in mplsTunnelTable, as computed…
    1.3.6.1.3.95.2.9 mplsTunnelPerfTable 1 6 This table provides per-tunnel MPLS performance
    information.
    1.3.6.1.3.95.2.10 mplsTunnelTrapEnable, mplsTunnelCRLDPResTable 2 9 If this object is true, then it enables the
    generation of mplsTunnelUp and mplsTunnelDown
    traps, otherwise these traps are not em…
    1.3.6.1.3.95.2.11 11 1 1 mplsTunnelTrapEnable

    Brothers (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.3.95.1 mplsTeScalars 9 66 None
    1.3.6.1.3.95.3 mplsTeNotifications 3 17 None
    1.3.6.1.3.95.4 mplsTeConformance 2 11 None