Supporting sources for 1.3.6.1.4.1.2356.14.2.28.2
Back to the OID record · lcsPTPAdjustMethod
23 sources · Page 1 of 1
-
LANCOM official release MIBs
· Download LC-GS-2412-4.30.0224-RU5.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-2412-4.30.0302-RU6.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-2412-4.30.0434-RU7.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-2412-4.30.0502-RU10.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0219-SU3.mib
Source data warning: The publisher uses a lowercase row/type name. Preserve this literal type reference and every numeric OID; do not silently change its spelling.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0261-RU4.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0305-RU5.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0349-RU7.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0414-RU8.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0501-RU9.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0713-RU11.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.00.0716-SU13.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.30.0072-RU1.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3126X-4.30.0147-RU4.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3152X-4.00.0070-Rel.mib
Source data warning: The publisher uses a lowercase row/type name. Preserve this literal type reference and every numeric OID; do not silently change its spelling.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3152X-4.00.0139-RU1.mib
Source data warning: The publisher uses a lowercase row/type name. Preserve this literal type reference and every numeric OID; do not silently change its spelling.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3152X-4.00.0614-RU10.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3252P-4.20.0074-Rel.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3252P-4.20.0126-RU1.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3252P-4.20.0242-SU3.mib
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM official release MIBs
· Download LC-GS-3528XP-4.00.0125-Rel.mib
Source data warning: The publisher uses a lowercase row/type name. Preserve this literal type reference and every numeric OID; do not silently change its spelling.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 } -
LANCOM MIB copies (LibreNMS/Observium Community)
· Download LCOS-SX-MIB
Vendor MIB copy from the LibreNMS archive. LANCOM support.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 }Related source files and packages:
-
LANCOM MIB copies (LibreNMS/Observium Community)
· Download LCOS-SX-MIB
Vendor MIB copy from the Observium Community archive. LANCOM support.
Published definition
lcsPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { lcsPTP 2 }Related source files and packages: