Several Flags are supported by this mib object,
only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are
accessible.
The only allowable values for setting are as follows:-
24 (0x18) - SEND_REQUEST and METRICS
8 - METRICS
16 (0x10) - SEND_REQUEST
0 - NONE
Note:- when setting these values a GET will not
necessarily return the value SET: it will
return the SET value plus the bitmask(s)
for inaccessible flags.
The default flags are 0x1A (decimal 26) reflecting,
RIP_FLAG_JITTER_UPDATE := 0x00000002 (default)
RIP_FLAG_RFC1058_METRICS := 0x00000008 (default)
RIP_FLAG_SEND_REQUEST := 0x00000010 (default)
Parsed from file USR-IP-ROUTING-MIB.mib.txt
Company: None
Module: USR-IP-ROUTING-MIB
Several Flags are supported by this mib object,
only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are
accessible.
The only allowable values for setting are as follows:-
24 (0x18) - SEND_REQUEST & METRICS
8 - METRICS
16 (0x10) - SEND_REQUEST
0 - NONE
Note:- when setting these values a GET will not
necessarily return the value SET: it will
return the SET value plus the bitmask(s)
for inaccessible flags.
The default flags are 0x1A (decimal 26) reflecting,
RIP_FLAG_JITTER_UPDATE := 0x00000002 (default)
RIP_FLAG_RFC1058_METRICS := 0x00000008 (default)
RIP_FLAG_SEND_REQUEST := 0x00000010 (default)
Parsed from file USR-IP-ROUTING-MIB.mib
Module: USR-IP-ROUTING-MIB
Vendor: UTStarcom Incorporated
Module: USR-IP-ROUTING-MIB
[Automatically extracted from oidview.com]
usrIpRipFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Several Flags are supported by this mib object, only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are accessible. The only allowable values for setting are as follows:- 24 (0x18) - SEND_REQUEST and METRICS 8 - METRICS 16 (0x10) - SEND_REQUEST 0 - NONE Note:- when setting these values a GET will not necessarily return the value SET: it will return the SET value plus the bitmask(s) for inaccessible flags. The default flags are 0x1A (decimal 26) reflecting, RIP_FLAG_JITTER_UPDATE := 0x00000002 (default) RIP_FLAG_RFC1058_METRICS := 0x00000008 (default) RIP_FLAG_SEND_REQUEST := 0x00000010 (default) " ::= {usrIpRouting 12}
usrIpRipFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Several Flags are supported by this mib object, only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are accessible. The only allowable values for setting are as follows:- 24 (0x18) - SEND_REQUEST & METRICS 8 - METRICS 16 (0x10) - SEND_REQUEST 0 - NONE Note:- when setting these values a GET will not necessarily return the value SET: it will return the SET value plus the bitmask(s) for inaccessible flags. The default flags are 0x1A (decimal 26) reflecting, RIP_FLAG_JITTER_UPDATE := 0x00000002 (default) RIP_FLAG_RFC1058_METRICS := 0x00000008 (default) RIP_FLAG_SEND_REQUEST := 0x00000010 (default) " ::= {usrIpRouting 12}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.19.12.0 | usrIpRipFlags | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.19.1 | usrIpRouterId | 1 | 1 | the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrI… |
| 1.3.6.1.4.1.429.4.19.2 | usrIpAdminStatus | 1 | 1 | this variable is used to enable or disable the ip routing instance. |
| 1.3.6.1.4.1.429.4.19.3 | usrIpStaticProtoStatus | 1 | 1 | this variable is used to enable or disable static remote routes |
| 1.3.6.1.4.1.429.4.19.4 | usrIpASNumber | 1 | 1 | this is the autonomous system number used by egp, which can only be modified when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.5 | usrIpRtabMaxAdmin | 1 | 1 | the max admin route table entries for next set. this is put in by rci for lightstream atm. it is not used by lanlinker or nets… |
| 1.3.6.1.4.1.429.4.19.6 | usrIpRtabMax | 1 | 1 | this displays the maximum routing table size, this value can no longer be modified. The max size of the routing table is determin… |
| 1.3.6.1.4.1.429.4.19.7 | usrIpNHEntryMax | 1 | 1 | this defines the maximum next hop entries, which can only be modified when usrIpAdminStatus is set to disabled. the default is 5… |
| 1.3.6.1.4.1.429.4.19.8 | usrIpRtEntryCount | 1 | 1 | this keeps the number of route entries. |
| 1.3.6.1.4.1.429.4.19.9 | usrIpGenStat | 1 | 1 | this variable denotes the existence of the ip routing instance, which can also be used to delete the routing instance. |
| 1.3.6.1.4.1.429.4.19.10 | usrIpRipGenStat | 1 | 1 | this mib variable is used to enable or disable the ip rip instance at the ip routing instance level. it is a no op if ip rip in… |
| 1.3.6.1.4.1.429.4.19.11 | usrIpRipAdminStatus | 1 | 1 | this variable is used to create or delete the ip rip instance. |
| 1.3.6.1.4.1.429.4.19.13 | usrIpIfbTable | 1 | 13 | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.14 | usrIpRipGenAdminStat | 1 | 1 | this variable is used to disable or enable the ip rip instance at the rip instance level. |
| 1.3.6.1.4.1.429.4.19.15 | usrIpRipGenIntfCnt | 1 | 1 | this variable shows the number of the ip rip interfaces. |
| 1.3.6.1.4.1.429.4.19.16 | usrIpRipGenNbrCnt | 1 | 1 | this variable shows the number of the rip neighbours. |
| 1.3.6.1.4.1.429.4.19.17 | usrIpRipGenJitter | 1 | 1 | this variable is used to enable or disable the rip packet jitter feature. |
| 1.3.6.1.4.1.429.4.19.18 | usrIpRipIfTable | 1 | 20 | usrIpRipIftable |
| 1.3.6.1.4.1.429.4.19.19 | usrIpRip2IfConfTable | 1 | 11 | usrIpRip2IfConftable |
| 1.3.6.1.4.1.429.4.19.20 | usrIpDelRouteAll | 1 | 1 | This object is used to clear the whole routing table - setting this object with ANY value will do this. |
| 1.3.6.1.4.1.429.4.19.21 | usrIPRterBaseCfgFileName | 1 | 1 | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SLIP … |
| 1.3.6.1.4.1.429.4.19.22 | usrIPRterBaseCFMSaveStatus | 1 | 1 | Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP… |
| 1.3.6.1.4.1.429.4.19.23 | usrIpRTH | 1 | 11 | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.24 | usrIpRTE | 1 | 11 | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.26 | usrIpRipRXPacketCount | 1 | 1 | Number of IP RIP packets received. |
| 1.3.6.1.4.1.429.4.19.27 | usrIpRipTXPacketCount | 1 | 1 | Number of IP RIP packets transmitted. |
| 1.3.6.1.4.1.429.4.19.28 | usrIpRipIncorrectPacketCount | 1 | 1 | Number of incorrect IP RIP packets received. |