Objects in COSINE-ORION-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.3085.3.1.6.5.5.1.10csOrionIKEPolicyPfsGroupIf one of the pfs features is enabled in
csOrionIKECryptoMapFlags, this object is used to identify
the Diffie-Helman group used for this IKE Crypto Map.
1.3.6.1.4.1.3085.3.1.6.22.2.1.7csOrionQoSMeterAclListACLs that are associated with the metering control block
1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.11csMplsLspPathChangesThe number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it.
1.3.6.1.4.1.3085.3.1.4.2.10.3.3csLdpEntityTableThis table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.1csLdpEntityIndexThis index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'csLdpEntityIndexNext' object should be retrieve…
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.2csLdpEntityRowStatusAn object that allows entries in this table to
be created and deleted using the RowStatus convention.
Once the 'csLdpEntityAdminStatus' object has
the value of 'u…
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.3csLdpEntityAdminStatusThe administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with…
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.5csLdpEntityHelloHoldTimerThe two octet value which is the proposed Hello hold
timer for this LDP Entity. A value of 0 means use the
default, which is 15 seconds for Link Hellos and 45
sec…
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.6csLdpEntityKeepAliveTimerConfigures the interval in seconds between keepalive
messages on this interface.
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.7csLdpEntityKeepAliveHoldTimerThe two octet value which is the proposed keep alive hold
timer for this LDP Entity.
1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.8csLdpEntityTransportAddrThis is used to store transport ip address for LDP Entity
1.3.6.1.4.1.3085.3.1.6.12.3.1.9csFRoIPCircuitCreationTimeThe value of sysUpTime when the virtual circuit was
created, whether by the Data Link Connection Management
Interface or by a SetRequest.
1.3.6.1.4.1.3085.3.1.3.5.2csAtmConnTableThis table can be used to creata virtual connections
in this ATM interface.
1.3.6.1.4.1.3085.3.1.3.5.2.1.10csAtmConnICRInital Cell rate for the connection.
NOTE: This value is applicable for ABR service category.
1.3.6.1.4.1.3085.3.1.3.5.2.1.11csAtmConnMCRMinimum Cell rate for the connection.
NOTE: This value is applicable for ABR service category.
1.3.6.1.4.1.3085.3.1.3.5.2.1.12csAtmConnOamLoopbackThis object is used to enable/disable the loopback.
1.3.6.1.4.1.3085.3.1.3.5.2.1.13csAtmConnOamContinuityThis object is used to enable/disable the continuity.
1.3.6.1.4.1.3085.3.1.3.5.2.1.14csAtmConnAal5CpcsTransmitSduSizeAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 is in use.
The maximum AAL5 CPCS SDU size in octets that i…
1.3.6.1.4.1.3085.3.1.3.5.2.1.15csAtmConnAal5CpcsReceiveSduSizeAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 is in use.
The maximum AAL5 CPCS SDU size in octets that i…
1.3.6.1.4.1.3085.3.1.3.5.2.1.16csAtmConnEncapTypeThe use of call control.
1.3.6.1.4.1.3085.3.1.3.5.2.1.17csAtmConnKindThe use of call control.
1.3.6.1.4.1.3085.3.1.3.5.2.1.18csAtmConnAdminStatusThis object is instanciated only for a connection
which terminates a VCC (i.e., one which is NOT
cross-connected to other connections). Its value
specifies the de…
1.3.6.1.4.1.3085.3.1.3.5.2.1.19csAtmConnOperStatusThe current operational status of the connection.
1.3.6.1.4.1.3085.3.1.3.5.2.1.2csAtmConnSubIfIndexThe identifier for this ATM connection. This
corresponds to the 'subinterface' entered via the CLI.
1.3.6.1.4.1.3085.3.1.3.5.2.1.20csAtmConnRowStatusThis object is used to create, delete or modify
a row in this table.
1.3.6.1.4.1.3085.3.1.3.5.2.1.21csAtmConnUpperProtocolThis object is used to set the upper protocol.
For PPP over ATM this is set to 'ppp'.
For PPP over Ethernet this is set to 'pppoe'.
NOTE: This object cannot be se…
1.3.6.1.4.1.3085.3.1.3.5.2.1.22csAtmConnArpAgingTimeAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports Bridging format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.23csAtmConnArpCacheSizeAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports Bridging format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.24csAtmConnEthernetMacAddressAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports Bridging format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.25csAtmConnEvLogLevelThis object is used to set the level for details for
event logs forATM VCC.
Events with level higher than this object will not be
logged.
1.3.6.1.4.1.3085.3.1.3.5.2.1.26csAtmConnEvLogAreaThis object is used to set the area of event logs for ATM VCC.
Events which area is not specified in this object will
not be logged.
1.3.6.1.4.1.3085.3.1.3.5.2.1.27csAtmConnInArpAgingTimeAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports LLC-SNAP format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.28csAtmConnInArpManageVcAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports LLC-SNAP format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.29csAtmConnInArpManageStatusAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports LLC-SNAP format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.3csAtmConnVpiVirtual Path ID of this connection. This is mandatory in
creating a connection.
1.3.6.1.4.1.3085.3.1.3.5.2.1.30csAtmConnInArpAdminStatusAn instance of this object only exists when the
local VCL end-point is also the VCC end-point,
and AAL5 Encapsulation type supports LLC-SNAP format.
This objects …
1.3.6.1.4.1.3085.3.1.3.5.2.1.31csAtmConnOamLoopbackRetryPvcUpCountOAM retry count before declaring the PVC up.
1.3.6.1.4.1.3085.3.1.3.5.2.1.32csAtmConnOamLoopbackRetryPvcUpRetryDelayOAM retry Frequency in seconds.
1.3.6.1.4.1.3085.3.1.3.5.2.1.33csAtmConnOamLoopbackRetryPvcUpAgeOAM Time to wait before transmitting OAM requests for UP status(in minutes)
1.3.6.1.4.1.3085.3.1.3.5.2.1.35csAtmConnOamLoopbackRetryPvcDownRetryDelayOAM retry Frequency in seconds (for down status).
1.3.6.1.4.1.3085.3.1.3.5.2.1.36csAtmConnOamLoopbackRetryPvcDownAgeOAM Time to wait before transmitting OAM requests (in minutes)
1.3.6.1.4.1.3085.3.1.3.5.2.1.37csAtmConnOamLoopbackManageVcThis object is used to enable/disable the oam loopback manage vc.
1.3.6.1.4.1.3085.3.1.3.5.2.1.38csAtmConnOamLoopbackStatusThe current loopback status of the connection.
1.3.6.1.4.1.3085.3.1.3.5.2.1.4csAtmConnVciVirtual Channel ID of this connection. This is mandatory in
creating a connection.
1.3.6.1.4.1.3085.3.1.3.5.2.1.5csAtmConnTypeThe ATM service category.
NOTE : The type other(1) is not implemented for write operation.
Setting to this type will default to ubr(6).
1.3.6.1.4.1.3085.3.1.3.5.2.1.6csAtmConnPvcType
1.3.6.1.4.1.3085.3.1.3.5.2.1.7csAtmConnPCRPeak Cell rate for the connection.
1.3.6.1.4.1.3085.3.1.3.5.2.1.8csAtmConnSCRSustain Cell rate for the connection.
NOTE: This value is applicable for VBR service categories.
1.3.6.1.4.1.3085.3.1.3.5.2.1.9csAtmConnMBSMaximum Burst Size for the connection.
NOTE: This value is applicable for VBR service categories.
1.3.6.1.4.1.3085.3.1.1.1.8csOrionLogLinkDownThis trap indicates that a Logical Link on the Orion is about
to enter the down state.