Objects in INTERFACES-MIB
OID records
| OID | Name | Description |
|---|---|---|
| 1.3.6.1.4.1.425.8.11.1.1.6 | traplogTimeStamp | Time the SNMP was generated. |
| 1.3.6.1.4.1.425.8.11.1.1.7 | traplogDeviceType | Specifies the device type for the trap. |
| 1.3.6.1.4.1.425.8.8.1.1.8 | bertBitErrors | Displays the total number of bit errors detected since the test began. |
| 1.3.6.1.4.1.425.8.10.1.1.8 | iStatus | Status of the interface. |
| 1.3.6.1.4.1.425.8.4.2.1.9 | ddsNetLOSAlarm | This status indicates if the Loss of Signal Seconds threshold is exceeded. |
| 1.3.6.1.4.1.425.8.4.2.1.15 | ddsNetOOSCount | This count contains the number of consecutive seconds the unit has received the out of service code. |
| 1.3.6.1.4.1.425.8.5.1.1.3 | serialDteConfigIndex | Index into the DteTable. |
| 1.3.6.1.4.1.425.8.3.1.1.8 | t1e1LineBuildOut | Selects the line build out for the network interface. The options are: t1e1LineBuildOut0db indicates a line build out of 0db t1e1LineBuildOut75db indicate… |
| 1.3.6.1.4.1.425.8.5.1.1.18 | serialDteV54 | Specifies if the unit should respond to inband V.54 loop commands. |
| 1.3.6.1.4.1.425.8.3.1.1.6 | t1e1FrameType | Selects the framing for the network side of the DSU/CSU. |
| 1.3.6.1.4.1.425.8.5.2.1.10 | serialDteASCThreshold | The number of ASC seconds that must be received before an alarm is declared. |
| 1.3.6.1.4.1.425.8.8.1.1.9 | bertErroredSeconds | Displays the number of asynchronous errored seconds that have been detected since the test began. |
| 1.3.6.1.4.1.425.8.2.1.1.8 | dbuNumber | This string is the currently programmed number for the dial backup unit to call |
| 1.3.6.1.4.1.425.8.4.2.1.5 | ddsNetAlarmSummary | This object provides a summary of the port alarms. |
| 1.3.6.1.4.1.425.8.10.1 | iTable | The interface table. |
| 1.3.6.1.4.1.425.8.10 | itable | |
| 1.3.6.1.4.1.425.8.2.1.1.9 | dbuStatus | This object is the identifier of the current Dial Backup Unit operating status. The values mean: dbuStatusDisabled The dial backup unit is either not installed or d… |
| 1.3.6.1.4.1.425.8.8.3.1.2 | testFarIndex | Selects the far device. |
| 1.3.6.1.4.1.425.8.8.3.1.3 | testTableIndex | The index into the testTable, one entry for each interface. |
| 1.3.6.1.4.1.425.8.8.3.1.4 | testType | Identifies the test type for the interface. |
| 1.3.6.1.4.1.425.8.8.3.1.6 | testFarLLBFraming | This setting, for Far LLB tests on T1 lines, must match the far end unit loop code framing. |
| 1.3.6.1.4.1.425.8.10.1.1.1 | iTableNearIndex | Selects the near device. |
| 1.3.6.1.4.1.425.8.5.2.1.7 | serialDteAlarmSummary | This object provides a summary of the port alarms. |
| 1.3.6.1.4.1.425.8.5.2.1.1 | serialDteAlarmNearIndex | Selects the near device. |
| 1.3.6.1.4.1.425.8.5.2.1.15 | serialDteFDLAlarm | This status indicates if the FDL Errored Seconds threshold is exceeded. |
| 1.3.6.1.4.1.425.8.5.2.1.18 | serialDteLOSThreshold | The number of LOS seconds that must be received before an alarm is declared. |
| 1.3.6.1.4.1.425.8.5.2.1.19 | serialDteLOSAlarm | This status indicates if the LOS Seconds threshold is exceeded. |
| 1.3.6.1.4.1.425.8.5.2.1.4 | serialDteDTRAlarmControl | Specifies if the unit should alarm on loss of DTR. |
| 1.3.6.1.4.1.425.8.5.2.1.5 | serialDteDTRAlarmStatus | This status indicates a DTR Loss alarm is active. |
| 1.3.6.1.4.1.425.8.5.2.1.8 | serialDteASCStatus | Reports if an ASC condition exists on the interface. |
| 1.3.6.1.4.1.425.8.5.2.1.9 | serialDteASCCount | This count contains the number of ASC seconds received by the interface. |
| 1.3.6.1.4.1.425.1 | companyinfo | |
| 1.3.6.1.4.1.425.8.2.1.1.19 | dbuISDNSwitchType | dbuISDNSwitchtype |
| 1.3.6.1.4.1.425.8.9.2.1.1 | performance30NearIndex | Selects the near device. |
| 1.3.6.1.4.1.425.8.2.3.1.6 | dbuStop | This object is the end of an allowable window for Dial Backup Activation. |
| 1.3.6.1.4.1.425.8.7.2.1.7 | channelInterfaceChannel | Displays the corresponding channel of the interface channel connection. |
| 1.3.6.1.4.1.425.8.9.2.1.11 | performance30CRCES | The number of CRC Errored Seconds for the 1-day period. |
| 1.3.6.1.4.1.425.8.2.1.1.13 | dbuDialStr | This string is the dial string sent to the dial backup unit during every connection attempt |
| 1.3.6.1.4.1.425.8.3.1.1.14 | t1e1NationalBit | Selects a national bit to create a 4-kpbs datalink between the endpoint units. |
| 1.3.6.1.4.1.425.8.2.2 | dbuResetStringsTable | A table of COLD START reprogramming strings for the dial backup unit. |
| 1.3.6.1.4.1.425.8.9.2.1.3 | performance30InterfaceIndex | Selects the interface. |
| 1.3.6.1.4.1.425.8.5.1.1.8 | serialDteFormat | This variable describes the current operations format of the DTE interface. The values mean: serialDteFormatSync The DTE interface is currently set to operate in S… |
| 1.3.6.1.4.1.425.8.9.2.1.2 | performance30FarIndex | Selects the far device. |
| 1.3.6.1.4.1.425.8.2.3 | dbuStartStopTable | The Dial Backup StartStop Table. |
| 1.3.6.1.4.1.425.8.9.1.1.12 | performance24OOFS | The number of Out of Frame Seconds for the 15-minute period. |
| 1.3.6.1.4.1.425.8.5.1.1.4 | serialDteDescription | Contains a textual description of the port. |
| 1.3.6.1.4.1.425.7 | utilities | |
| 1.3.6.1.4.1.425.8.9.2.1.9 | performance30LOFC | The number of Loss of Frame Counts for the 1-day period. |
| 1.3.6.1.4.1.425.8.5.1.1.12 | serialDteDSR | Selects DSR behavior. |
| 1.3.6.1.4.1.425.8.5.1.1.23 | serialDteTxClock | Specifies how the interface derives its transmit clock. |