Objects in TIMESTEP-IPSEC-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.1022.10.1.1.2.1.1ipsecTunnelIndexA unique value, greater than zero, for each tunnel
interface. It is recommended that values are assigned
contiguously starting from 1.

The value for each tunnel …
1.3.6.1.4.1.1022.10.1.1.2.1.10ipsecTunnelRemotePortThe number of the remote port that this tunnel carries,
or 0 if it carries any port number.
1.3.6.1.4.1.1022.10.1.1.2.1.11ipsecTunnelModeThe type of encapsulation used by this virtual tunnel.
1.3.6.1.4.1.1022.10.1.1.2.1.12ipsecTunnelEspEncAlgA unique value representing the encryption algorithm
applied to traffic carried by this SA if it uses ESP or 0
if there is no encryption applied by ESP or if ESP…
1.3.6.1.4.1.1022.10.1.1.2.1.13ipsecTunnelEspEncKeyLengthThe length of the encryption key in bits used for the
algorithm specified in the ipsecTunnelEspEncAlg object,
or 0 if the key length is implicit in the specified
…
1.3.6.1.4.1.1022.10.1.1.2.1.14ipsecTunnelEspAuthAlgA unique value representing the hash algorithm applied
to traffic carried by this SA if it uses ESP or 0 if
there is no authentication applied by ESP or if ESP i…
1.3.6.1.4.1.1022.10.1.1.2.1.15ipsecTunnelAhAuthAlgA unique value representing the hash algorithm applied
to traffic carried by this SA if it uses AH or 0 if AH is
not used.

Specific values are taken from Section …
1.3.6.1.4.1.1022.10.1.1.2.1.16ipsecTunnelCompAlgA unique value representing the compression algorithm
applied to traffic carried by this SA if it uses IPCOMP.

Specific values are taken from Section 4.4.5 of [I…
1.3.6.1.4.1.1022.10.1.1.2.1.17ipsecTunnelStartTimeThe date and time that this virtual tunnel was set up.
If this is a permanent virtual tunnel, it is reset when
the number of current SAs (ipsecTunnelCurrentSaNum…
1.3.6.1.4.1.1022.10.1.1.2.1.18ipsecTunnelCurrentSaNumThe number of current SAs set up to support this virtual
tunnel.

If this number is 0, the tunnel must be considered down.
Also if this number is 0, the tunnel mus…
1.3.6.1.4.1.1022.10.1.1.2.1.19ipsecTunnelTotalSaNumThe total number of SAs, including all current SAs, that
have been set up to support this virtual tunnel.
1.3.6.1.4.1.1022.10.1.1.2.1.2ipsecTunnelIkeSaThe value of the index into the IKE SA tunnel table that
created this tunnel (ipsecIkeSaIndex), or 0 if the tunnel
is created by a static IPSec SA.
1.3.6.1.4.1.1022.10.1.1.2.1.20ipsecTunnelTotalInboundTrafficThe total amount of traffic measured in bytes handled in
the tunnel in the inbound direction. In other words, it
is the aggregate value of all inbound traffic ca…
1.3.6.1.4.1.1022.10.1.1.2.1.22ipsecTunnelTotalInboundPacketsThe total number of packets handled in the tunnel in the
inbound direction. In other words, it is the aggregate
value of all inbound packets carried by all IPSec…
1.3.6.1.4.1.1022.10.1.1.2.1.23ipsecTunnelTotalOutboundPacketsThe total number of packets handled in the tunnel in the
outbound direction. In other words, it is the aggregate
value of all outbound packets carried by all IPS…
1.3.6.1.4.1.1022.10.1.1.2.1.24ipsecTunnelDecryptErrorsThe total number of inbound packets discarded by this
virtual tunnel due to decryption errors in ESP.
If this is a permanent virtual tunnel, it is not reset to
ze…
1.3.6.1.4.1.1022.10.1.1.2.1.25ipsecTunnelAuthErrorsThe total number of inbound packets discarded by this
virtual tunnel due to authentication errors. This
includes hash failures in IPSec SA bundles using both ESP
…
1.3.6.1.4.1.1022.10.1.1.2.1.26ipsecTunnelReplayErrorsThe total number of inbound packets discarded by this
virtual tunnel due to replay errors. This includes replay
failures in IPSec SA bundles using both ESP and A…
1.3.6.1.4.1.1022.10.1.1.2.1.28ipsecTunnelOtherReceiveErrorsThe total number of inbound packets discarded by this
virtual tunnel due to errors other than decryption,
authentication or replay errors. This may include packe…
1.3.6.1.4.1.1022.10.1.1.2.1.3ipsecTunnelTypeThe type of the virtual tunnel represented by this row.

'static' means that the tunnel is supported by a single
static IPSec SA that was setup by configuration, …
1.3.6.1.4.1.1022.10.1.1.2.1.5ipsecTunnelLocalAddressMaskOrEndThe mask of or the end address (if an address range) of
the local endpoint of the tunnel, or 0.0.0.0 if unknown
or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.1022.10.1.1.2.1.6ipsecTunnelRemoteAddressOrStartThe address of or the start address (if an address
range) of the remote endpoint of the tunnel, or 0.0.0.0
if unknown or if the SA uses transport mode
encapsulati…
1.3.6.1.4.1.1022.10.1.1.2.1.7ipsecTunnelRemoteAddressMaskOrEndThe mask of or the end address (if an address range) of
the remote endpoint of the tunnel, or 0.0.0.0 if unknown
or if the SA uses transport mode encapsulation.
1.3.6.1.4.1.1022.10.1.1.2.1.8ipsecTunnelProtocolThe number of the protocol that this tunnel carries, or
0 if it carries any protocol.
1.3.6.1.4.1.1022.10.1.1.1.1.46ipsecIkeSaIpsecSendErrorsThe total number of outbound packets discarded by all
IPSec SAs due to any error. This may include packets
dropped due to lack of receive buffers.

If this is a pe…
1.3.6.1.4.1.1022.10.1.1.1ipsecIkeSaTableThe (conceptual) table containing information on IPSec's
IKE SAs.
1.3.6.1.4.1.1022.10.1.1.4ipsecTraps
1.3.6.1.4.1.1022.10.1.1.5ipsecSaCounts
1.3.6.1.4.1.1022.10.1.1.6ipsecPermTunStats
1.3.6.1.4.1.1022.10.1.1.8ipsecNotifications
1.3.6.1.4.1.1022.10.1.1.6.3ipsecCnfgPermIpsecTunnelsThe total number of phase 2 tunnels in the entity that
are configured as permanent.
1.3.6.1.4.1.1022.10.1.1.7.3ipsecTotalTransIpsecTunnelsThe total number of transient phase 2 tunnels
established by the entity since boot time.
1.3.6.1.4.1.1022.10.1.1.1.1.9ipsecIkeSaTypeThe type of virtual tunnel represented by this row.

A transient link will disappear from the table when
the SAs needed for it cannot be established. A
permanent l…
1.3.6.1.4.1.1022.10.1.1.8.2.1.1ipsecNotifyMessageThe value representing a specific IPSec notify message,
or 0 if unknown.

Values are assigned from the set of notify message types
as defined in Section 3.14.1 of …
1.3.6.1.4.1.1022.10.1.1.7.8ipsecTotalTransOutboundTrafficThe total amount of outbound traffic carried on
transient IPSec tunnels since boot time, measured in
1024-octet blocks.
1.3.6.1.4.1.1022.10.1.1.6.2ipsecUpPermIkeTunnelsThe total number of phase 1 tunnels in the entity that
are configured as permanent and are up and available for
use.
1.3.6.1.4.1.1022.10.1.1.9.2ipsecIkeProtocolErrorsThe total number of packets received by the entity since
boot time with IKE protocol errors.

This includes packets with invalid cookies, but does not
include erro…
1.3.6.1.4.1.1022.10.1.1.4.0.7ipsecTrapIpsecPolicyFailureIPSec packets carrying packets with invalid selectors
for the specified SA were found.

Implementations SHOULD send one trap per SA (within a
reasonable time perio…
1.3.6.1.4.1.1022.10.1.1.1.1.38ipsecIkeSaIpsecInboundTrafficThe total amount of inbound traffic measured in bytes
handled by all IPSec SAs set up by phase 1 SAs supporting
this tunnel.

If this is a permanent virtual tunnel…
1.3.6.1.4.1.1022.10.1.1.8.2ipsecNotifyCountTableThe (conceptual) table containing information on IPSec
notify message counts.

This table MAY be sparsely populated; that is, rows for
which the count is 0 may be …
1.3.6.1.4.1.1022.10.1.1.1.1.1ipsecIkeSaIndexA unique value, greater than zero, for each tunnel
interface. It is recommended that values are assigned
contiguously starting from 1.

The value for each tunnel …
1.3.6.1.4.1.1022.10.1.1.5.2ipsecTotalIpsecSAsThe total number of phase 2 SAs established by the
entity since boot time. It is not the total number of
IPSec virtual tunnels established by the entity since
boo…
1.3.6.1.4.1.1022.10.1.1.1.1.40ipsecIkeSaIpsecInboundPacketsThe total number of inbound packets handled by all IPSec
SAs set up by phase 1 SAs supporting this tunnel.
If this is a permanent virtual tunnel, it is not reset…
1.3.6.1.4.1.1022.10.1.1.4.0.2ipsecTrapTransIkeNegFailureAn attempt to negotiate a phase 1 SA for a transient IKE
tunnel failed.

This trap is different from the
'ipsecTrapPermIkeNegFailure' trap, since this one will
like…
1.3.6.1.4.1.1022.10.1.1.1.1.13ipsecIkeSaHashAlgA unique value representing the hash algorithm applied
to traffic carried by this SA or 0 if there is no
encryption applied.

Specific values are used as described…
1.3.6.1.4.1.1022.10.1.1.7.9ipsecTotalTransIkeSetupFailuresThe total number of IKE SA set up attempts that have
failed since entity boot time. This includes SAs
associated with transient tunnels only.
1.3.6.1.4.1.1022.10.1.1.1.1.10ipsecIkeSaStatusThe status of the virtual tunnel represented by this
row, if the tunnel is configured as permanent.

'neverTried' means that no attempt to set-up the link
has been…
1.3.6.1.4.1.1022.10.1.1.1.1.11ipsecIkeSaEncAlgA unique value representing the encryption algorithm
applied to traffic carried by this SA or 0 if there
is no encryption applied.

Specific values are used as des…
1.3.6.1.4.1.1022.10.1.1.1.1.12ipsecIkeSaEncKeyLengthThe length of the encryption key in bits used for
algorithm specified in the ipsecIkeSaEncAlg object or 0
if the key length is implicit in the specified
algorithm…
1.3.6.1.4.1.1022.10.1.1.1.1.15ipsecIkeSaDifHelGroupTypeA unique value representing the Diffie-Hellman group
type used or 0 if the group is unknown.

Specific values are used as described in the ISAKMP Class
Values of G…