-- MIB File Generated on 28-Apr-1997 at 17:49:07

WGW-MIB DEFINITIONS ::= BEGIN

IMPORTS
   enterprises,
   experimental,
   IpAddress,
   TimeTicks,
   Gauge,
   Counter
      FROM RFC1155-SMI
   DisplayString
      FROM RFC1213-MIB
   OBJECT-TYPE
      FROM RFC-1212;


usr OBJECT IDENTIFIER ::= { enterprises 429 }

nas OBJECT IDENTIFIER ::= { usr 1 }

wgw OBJECT IDENTIFIER ::= { nas 17 }

-- The WAS Card Command Group.

wgwCmd OBJECT IDENTIFIER ::= { wgw 1 }

wgwCmdTable OBJECT-TYPE
SYNTAX SEQUENCE OF WgwCmdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The command table contains an entry for each Wireless 
Gateway installed in a chassis. It provides a means for 
processing actions requested by the management console. "
::= { wgwCmd 1 }

wgwCmdEntry OBJECT-TYPE
SYNTAX WgwCmdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is one Wireless Gateway Card Command entry per 
Wireless Gateway Card in the chassis."
INDEX { wgwCmdIndex }
::= { wgwCmdTable 1 }

WgwCmdEntry ::=
SEQUENCE {
wgwCmdIndex
    INTEGER,
wgwCmdMgtStationId
    OCTET STRING,
wgwCmdReqId
    INTEGER,
wgwCmdFunction
    INTEGER,
wgwCmdForce
    INTEGER,
wgwCmdParam
    OCTET STRING,
wgwCmdResult
    INTEGER,
wgwCmdCode
    INTEGER
}

wgwCmdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index value which uniquely identifies the Wireless 
Gateway to which this entry is applicable. The value 
corresponds to the index of the corresponding Wireless 
Gateway in the entity table of the chassis."
::= { wgwCmdEntry 1 }

wgwCmdMgtStationId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a generic read-write variable that a 
Management Station (MS) can use to guarantee that the 
results from a given command are the results of a command 
issued by that specific MS.  Each MS must SET a unique 
value to this object when doing commands and GET the value 
of this object together with x25gwCmdReqId and 
x25gwCmdResult to detect interference from other MSs."
::= { wgwCmdEntry 2 }

wgwCmdReqId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the value of the request-id field in 
the SNMP PDU which invoked the current or most recent 
command or test on this Wireless Gateway Card.  If the 
request-id is unknown or undefined, this object contains 
the value zero."
::= { wgwCmdEntry 3 }

wgwCmdFunction OBJECT-TYPE
SYNTAX INTEGER{
  noCommand(1),
  saveToNVRAM(2),
  nonDisruptSelfTest(3),
  softwareReset(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains a value which describes the command 
which is being invoked."
::= { wgwCmdEntry 4 }

wgwCmdForce OBJECT-TYPE
SYNTAX INTEGER{
  force(1),
  noForce(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In certain cases Wireless Gateway may be in a state where 
commands could adversely affect connections. In such cases, 
a command with this object not set to noForce will result 
in a warning."
::= { wgwCmdEntry 5 }

wgwCmdParam OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains parameters that are specific to the 
particular command being issued.  In some cases, there will 
be no aditional parameters required."
::= { wgwCmdEntry 6 }

wgwCmdResult OBJECT-TYPE
SYNTAX INTEGER{
  none(1),
  success(2),
  inProgress(3),
  notSupported(4),
  unAbleToRun(5),
  aborted(6),
  failed(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the result of the most recently 
requested command or test, or the value none(1) if no 
commands have been requested since the last reset."
::= { wgwCmdEntry 7 }

wgwCmdCode OBJECT-TYPE
SYNTAX INTEGER{
  noError(1),
  unable(2),
  unrecognizedCommand(6),
  slotEmpty(8),
  noResponse(12),
  unsupportedCommand(20),
  testFailed(25),
  pendingSoftwareDownload(73)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Value of this object is value of this object is 
noError(1) if the command was successful, and indicates a 
further description of what went wrong if it was 
unsuccessful."
::= { wgwCmdEntry 8 }

-- The WAS Card Configuration Group.

wgwCfg OBJECT IDENTIFIER ::= { wgw 2 }

wgwCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF WgwCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of configurable parameters specific to the WAS 
Gateway NAC."
::= { wgwCfg 1 }

wgwCfgEntry OBJECT-TYPE
SYNTAX WgwCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { wgwCfgIndex }
::= { wgwCfgTable 1 }

WgwCfgEntry ::=
SEQUENCE {
wgwCfgIndex
    INTEGER,
wgwCfgSysDate
    DisplayString,
wgwCfgSysTime
    DisplayString,
wgwCfgBusyTone
    INTEGER,
wgwCfgRineToneEna
    INTEGER,
wgwCfgSelfTestResult
    INTEGER,
wgwCfgPbMasterClk
    INTEGER,
wgwCfgPbClkStatus
    INTEGER
}

wgwCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each Wireleass Gateway NAC in the system 
based on the values in the entity table in the USR 
extensions to the chassis mib."
::= { wgwCfgEntry 1 }

wgwCfgSysDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(5..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is to configure the Date of the Wireless 
Gateway Nac."
::= { wgwCfgEntry 2 }

wgwCfgSysTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(5..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is to configure the Time of the Wireless 
Gateway Nac."
::= { wgwCfgEntry 3 }

wgwCfgBusyTone OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to configure the busy tone duration in 
the Wireless Gateway NAC. Default = 0"
::= { wgwCfgEntry 4 }

wgwCfgRineToneEna OBJECT-TYPE
SYNTAX INTEGER{
  enable(1),
  disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is to enable/disable the ring tone. default = 
disable"
::= { wgwCfgEntry 5 }

wgwCfgSelfTestResult OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object returns the results of the most recent self 
test performed by the WAS Gateway NAC. If all tests have 
passed a 0 is returned."
::= { wgwCfgEntry 6 }

wgwCfgPbMasterClk OBJECT-TYPE
SYNTAX INTEGER{
  notSupported(1),
  enable(2),
  disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to disable the ability for a NAC to act 
as a packet bus clock master. Default = enable(2)."
::= { wgwCfgEntry 7 }

wgwCfgPbClkStatus OBJECT-TYPE
SYNTAX INTEGER{
  notSupported(1),
  clockMaster(2),
  clockSlave(3),
  noClockPresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the current status of the packet bus 
clock."
::= { wgwCfgEntry 8 }

-- The WAS Card Circuit Status Group.

wgwCktStat OBJECT IDENTIFIER ::= { wgw 3 }

wgwCktStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF WgwCktStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of circuit status information for each  Wireless 
Gateway Nac in the Chassis."
::= { wgwCktStat 1 }

wgwCktStatEntry OBJECT-TYPE
SYNTAX WgwCktStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is one entry in this table for every Wireless Gateway 
card in the chassis."
INDEX { wgwCktStatIndex, wgwCktIndex }
::= { wgwCktStatTable 1 }

WgwCktStatEntry ::=
SEQUENCE {
wgwCktStatIndex
    INTEGER,
wgwCktIndex
    INTEGER,
wgwCktStatCircuitState
    INTEGER,
wgwCktStatPriTrunk
    INTEGER,
wgwCktStatPriSlot
    INTEGER,
wgwCktStatPriChannel
    INTEGER,
wgwCktStatSecTrunk
    INTEGER,
wgwCktStatSecSlot
    INTEGER,
wgwCktStatSecChan
    INTEGER,
wgwCktStatConnectTime
    INTEGER,
wgwCktStatBytesPriToSec
    INTEGER,
wgwCktStatBytesSecToPri
    INTEGER,
wgwCktStatTimeToConnect
    INTEGER
}

wgwCktStatIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the Wireless Gateway card 
for which this row in the table pertains.  The value of 
this index matches the value of the index for the 
corresponding entity in the entity table of the chassis 
MIB."
::= { wgwCktStatEntry 1 }

wgwCktIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each Wireless Gateway Card in the system 
based on the value in the entity table in the USR extension 
to the chassis mib."
::= { wgwCktStatEntry 2 }

wgwCktStatCircuitState OBJECT-TYPE
SYNTAX INTEGER{
  notSupported(1),
  free(2),
  dormant(3),
  dialOut(4),
  waitDialOutAnswer(5),
  waitDialInAnswer(6),
  training(7),
  connected(8),
  disconnected(9),
  busyDisc(10),
  busy(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current status of the WAS circuit."
::= { wgwCktStatEntry 3 }

wgwCktStatPriTrunk OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The trunk ID that applies to the primary (incoming) link of 
this circuit."
::= { wgwCktStatEntry 4 }

wgwCktStatPriSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Slot number associated with the modem assigned to the 
primary link of this circuit."
::= { wgwCktStatEntry 5 }

wgwCktStatPriChannel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modem channel that is assigned to the primary link of 
this circuit."
::= { wgwCktStatEntry 6 }

wgwCktStatSecTrunk OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Trunk ID that applies to the secondary (outgoing) link 
of this circuit."
::= { wgwCktStatEntry 7 }

wgwCktStatSecSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Slot number associated with the modem assigned to the 
secondary link of the circuit."
::= { wgwCktStatEntry 8 }

wgwCktStatSecChan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modem channel that is assigned to the secondary link of 
this circuit."
::= { wgwCktStatEntry 9 }

wgwCktStatConnectTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The duration in seconds that this connection has been 
established."
::= { wgwCktStatEntry 10 }

wgwCktStatBytesPriToSec OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes transfered from the primary link to the 
secondary link on this circuit while the connection is 
maintained."
::= { wgwCktStatEntry 11 }

wgwCktStatBytesSecToPri OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes transfered from the secondary link to 
the primary link on this circuit while the connection is 
maintained."
::= { wgwCktStatEntry 12 }

wgwCktStatTimeToConnect OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds required to establish this circuit."
::= { wgwCktStatEntry 13 }

-- The WAS Card Trunk Status Group.

wgwTrunk OBJECT IDENTIFIER ::= { wgw 4 }

wgwTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF WgwTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about the trunk status on 
the Wireless Gateway Nac."
::= { wgwTrunk 1 }

wgwTrunkEntry OBJECT-TYPE
SYNTAX WgwTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of circuit status information for each Wireless 
Gateway in the chassis."
INDEX { wgwTrunkTblIndex, wgwTrunkIndex }
::= { wgwTrunkTable 1 }

WgwTrunkEntry ::=
SEQUENCE {
wgwTrunkTblIndex
    INTEGER,
wgwTrunkIndex
    INTEGER,
wgwTrunkSlot
    INTEGER,
wgwTrunkChannel
    INTEGER,
wgwTrunkAssignment
    INTEGER,
wgwTrunkState
    INTEGER,
wgwTrunkPeerTrunk
    INTEGER,
wgwTrunkCircuitId
    INTEGER,
wgwTrunkOOSReasons
    INTEGER
}

wgwTrunkTblIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each Wireless Gateway Nac in the system 
based on the values in the entity table in the USR 
extensions to the chassis mib."
::= { wgwTrunkEntry 1 }

wgwTrunkIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each trunk on a Wireless Gateway in the 
system."
::= { wgwTrunkEntry 2 }

wgwTrunkSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modem slot number assigned to this trunk."
::= { wgwTrunkEntry 3 }

wgwTrunkChannel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The modem channel that is assigned to this trunk."
::= { wgwTrunkEntry 4 }

wgwTrunkAssignment OBJECT-TYPE
SYNTAX INTEGER{
  notSupported(1),
  assigned(2),
  unassigned(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to set or determine the status of the 
assignment for this trunk and determines it's ability to 
provide connectivity. Default = unassigned(3)"
::= { wgwTrunkEntry 5 }

wgwTrunkState OBJECT-TYPE
SYNTAX INTEGER{
  notSupported(1),
  notApplicable(2),
  closed(3),
  closing(4),
  opening(5),
  setting(6),
  waiting(7),
  primary(8),
  secondary(9),
  outOfService(10),
  removed(11),
  disconnecting(12),
  busy(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current status of this trunk."
::= { wgwTrunkEntry 6 }

wgwTrunkPeerTrunk OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The trunk ID that applies to the other half of this 
circuit."
::= { wgwTrunkEntry 7 }

wgwTrunkCircuitId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The circuit ID that applies to this trunk."
::= { wgwTrunkEntry 8 }

wgwTrunkOOSReasons OBJECT-TYPE
SYNTAX INTEGER{
  trunkInService(1),
  bBopenRLreached(2),
  closeRlreached(3),
  closeWTO(5),
  eNPBModefail(6),
  openWTO(7),
  openRLreached(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Out Of Service Reason for this trunk."
::= { wgwTrunkEntry 9 }

-- The WAS Card Trap Enable Group.

wgwTrapEna OBJECT IDENTIFIER ::= { wgw 5 }

wgwTrapEnaTable OBJECT-TYPE
SYNTAX SEQUENCE OF WgwTrapEnaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing objects to enable traps on the Wireless 
Gateway Cards in the chassis."
::= { wgwTrapEna 1 }

wgwTrapEnaEntry OBJECT-TYPE
SYNTAX WgwTrapEnaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is one entry for each Wireless Gateway Card in the 
chassis."
INDEX { wgwTrapEnaIndex }
::= { wgwTrapEnaTable 1 }

WgwTrapEnaEntry ::=
SEQUENCE {
wgwTrapEnaIndex
    INTEGER,
wgwTrapEnaUiReset
    INTEGER,
wgwTrapEnaPbLost
    INTEGER,
wgwTrapEnaPbRest
    INTEGER
}

wgwTrapEnaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique index identifying the Wireless Gateway Card to 
which the trap enable objects pertain."
::= { wgwTrapEnaEntry 1 }

wgwTrapEnaUiReset OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables reporting of NAC Reset by user interface command 
traps. Default=disable(2)."
::= { wgwTrapEnaEntry 2 }

wgwTrapEnaPbLost OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to report an event when the packet bus 
clock has been lost. Default = disableAll(2)."
::= { wgwTrapEnaEntry 3 }

wgwTrapEnaPbRest OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to report an event when the packet bus 
clock has been restored. Default = disableAll(2)."
::= { wgwTrapEnaEntry 4 }

END