-- MIB created 2/05/97 18:21:03, by -- SMIC (the next generation) version 1.6.29, November 22, 1994. DS3SUPPMIB DEFINITIONS ::= BEGIN -- From file: "cascadeds3.mib2" -- Compile options "K U M" IMPORTS Gauge32 FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 TruthValue FROM SNMPv2-TC-v1 InterfaceIndex, ifIndex FROM IF-MIB cascadepm FROM CASCADE-MIB; ds3SuppMIB OBJECT IDENTIFIER ::= { cascadepm 2 } -- MODULE-IDENTITY -- LastUpdated -- 9610170552Z -- OrgName -- Cascade Communications Corporation -- ContactInfo -- Cascade Communications Corporation -- -- Postal: Cascade Communications Corporation -- 5 Carlise Road -- Westfard, MA 01886 -- Tel: +1 508 692 2600 -- E-mail: support@casc.com -- WEB: http://www.casc.com -- Descr -- The MIB module that describes DS3 and E3 interfaces -- supplemental objects. This document supplements RFC 1407 -- and DS3/E3 Draft MIB rfcTBD [14]. This MIB is optional -- and provides management support for ANSI T1.231-1993 and -- RFC 1695. noSuchObject will be returned if no data is -- available. -- -- The objects defined in this MIB module were identified by -- examining ANSI T1.231-1993 and identifying functionality -- that was not specified in the standard DS3-MIB. In -- addition, the Bellcore GR-820-CORE document was consulted, -- specifically to determine the conformance statements. -- -- -- Also defined in this MIB module are objects defined by ATM -- MIB rfc1695, Bellcore TR-TSV-000773, Bellcore -- TR-NWT-001112, and ANSI T1E1.2/94-002R1 specifications. -- -- Implementing this MIB is optional in a managed device that -- has these types of interfaces because of the additional -- processing and storage capabilities that are required. -- The management functions described in this memo are -- particularly appropriate for 'mediation devices' -- associated with managed device. (See ANSI T1.231-1993.) dsx3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains additional configuration objects for a DS3 interface." ::= { ds3SuppMIB 1 } dsx3ConfigEntry OBJECT-TYPE SYNTAX Dsx3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration objects for a particular DS3 interface. This entry augments, or extends, the dsx3ConfigEntry defined in the DS3-MIB." INDEX { ifIndex } ::= { dsx3ConfigTable 1 } Dsx3ConfigEntry ::= SEQUENCE { dsx3ConfigIndex InterfaceIndex, dsx3DayTimeElapsed INTEGER, dsx3ValidDayIntervals INTEGER, dsx3EnableAllTCAs TruthValue, dsx3PLCPAlarmState INTEGER, dsx3TCAlarmState INTEGER, dsx3AICSignal INTEGER, dsx3IdleSignal INTEGER, dsx3PLCPStatus INTEGER, dsx3TCStatus INTEGER, dsx3FEBE INTEGER, dsx3FEAC INTEGER, dsx3EnableFEACLpbk TruthValue, dsx3FEACCode INTEGER, dsx3AlarmFailureTime INTEGER, dsx3AlarmClearTime INTEGER } dsx3ConfigIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This object is the identifier of a DS3/E3 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS3/E3 interface, it should have the same value as ifIndex. Otherwise, number the dsx3LineIndices with an unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g, network side) with odd numbers." ::= { dsx3ConfigEntry 1 } dsx3DayTimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..899) ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the near end day error measurement period." ::= { dsx3ConfigEntry 2 } dsx3ValidDayIntervals OBJECT-TYPE SYNTAX INTEGER(0..3) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous near end Day intervals for which valid data was collected. The value will be 3 unless the interface was brought online within the last 3 days, in which case the value will be the number of complete 1 day near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which valid data is available." ::= { dsx3ConfigEntry 3 } dsx3EnableAllTCAs OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the sending of Threshold Crossing Alerts (TCAs) for the all the threshold on an interface. By default, agents should initialize this object to 'false(2)'" DEFVAL { false } ::= { dsx3ConfigEntry 4 } dsx3PLCPAlarmState OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This object is show current PLCP alarm state." ::= { dsx3ConfigEntry 5 } dsx3TCAlarmState OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This object is show current TC alarm state." ::= { dsx3ConfigEntry 6 } dsx3IdleSignal OBJECT-TYPE SYNTAX INTEGER { dsx3NoIdle(1), dsx3ReceivingIdle(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the presence Idle signal being received by this DS3 interface." ::= { dsx3ConfigEntry 7 } dsx3AICSignal OBJECT-TYPE SYNTAX INTEGER { dsx3CbitParity(1), dsx3M23orSYNTRAN(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the presence of C-bit application or M23/SYNTRAN application based on the AIC signal being received by this DS3 interface." ::= { dsx3ConfigEntry 8 } dsx3PLCPStatus OBJECT-TYPE SYNTAX INTEGER { dsx3NoPLCPStatus(1), dsx3ReceivingLOF(2), dsx3ReceivingYEL(4), dsx3ReceivingAIS(8), dsx3ReceivingFEBE(16) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the PLCP Status being received by this DS3 interface." ::= { dsx3ConfigEntry 9 } dsx3TCStatus OBJECT-TYPE SYNTAX INTEGER { dsx3NoTCStatus(1), dsx3ReceivingOCD(2), dsx3ReceivingLCD(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the presence FEBE being received by this DS3 interface." ::= { dsx3ConfigEntry 10 } dsx3FEBE OBJECT-TYPE SYNTAX INTEGER { dsx3NoFEBE(1), dsx3ReceivingFEBE(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the presence FEBE being received by this DS3 interface." ::= { dsx3ConfigEntry 11 } dsx3FEAC OBJECT-TYPE SYNTAX INTEGER { dsx3NoFEAC(1), dsx3DS3EquipmentFailure(2), dsx3DS3LOS(4), dsx3DS3OutofFrame(8), dsx3DS3AISreceived(16), dsx3DS3IDLEreceived(32), dsx3DS3NonServiceAffectingEquipFailure(64), dsx3CommonEquipmentFailure(128), dsx3DS3LoopbackReceived(256), dsx3DS1ServiceAffectingEquipmentFailure(512), dsx3DS1NonServiceAffectingEquipFailure(1024), dsx3SingleDS1LOS(2048), dsx3MultipleDS1sLOS(4096) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the presence FEAC being received by this DS3 interface. Non zero INTEGER indicating the current DS3 FEAC status." ::= { dsx3ConfigEntry 12 } dsx3EnableFEACLpbk OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the processing of FEAC Line Loopback Activate/Deactivate requests on an interface. By default, agents should initialize this object to 'true(1)'" DEFVAL { true } ::= { dsx3ConfigEntry 13 } dsx3FEACCode OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the FEAC Codeword values to be used to be transmit received by this DS3 interface. Non zero INTEGER indicating the current DS3 FEAC Signal Code." ::= { dsx3ConfigEntry 14 } dsx3AlarmFailureTime OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time a defect persists on a DS3 interface before declaring failure for all alarms. The value is specificed in milliseconds." DEFVAL { 2500 } ::= { dsx3ConfigEntry 15 } dsx3AlarmClearTime OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time a defect does not persists on a DS3 interface before clearing failure for all alarms. The value is specificed in milliseconds." DEFVAL { 10000 } ::= { dsx3ConfigEntry 16 } dsx3CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 current table contains various statistics being collected for the current 15 minute interval." ::= { ds3SuppMIB 2 } dsx3CurrentEntry OBJECT-TYPE SYNTAX Dsx3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Current table." INDEX { dsx3CurrentIndex } ::= { dsx3CurrentTable 1 } Dsx3CurrentEntry ::= SEQUENCE { dsx3CurrentIndex InterfaceIndex, dsx3CurrentValidData TruthValue, dsx3CurrentLESAs Gauge32, dsx3CurrentLESBs Gauge32, dsx3CurrentLSESs Gauge32, dsx3CurrentLLOSSs Gauge32, dsx3CurrentPESAPs Gauge32, dsx3CurrentPESBPs Gauge32, dsx3CurrentPESACPs Gauge32, dsx3CurrentPESBCPs Gauge32, dsx3CurrentPAISSs Gauge32, dsx3CurrentPUASCPs Gauge32, dsx3CurrentPFCs Gauge32, dsx3CurrentOCDs Gauge32, dsx3CurrentOCDESs Gauge32, dsx3CurrentLCDs Gauge32, dsx3CurrentLCDESs Gauge32, dsx3CurrentPLCPBIPs Gauge32, dsx3CurrentPLCPLOFs Gauge32, dsx3CurrentPLCPLOFESs Gauge32, dsx3CurrentPLCPYELs Gauge32, dsx3CurrentPLCPYELESs Gauge32, dsx3CurrentPLCPCVs Gauge32, dsx3CurrentPLCPESs Gauge32, dsx3CurrentPLCPSESs Gauge32, dsx3CurrentPLCPSEFs Gauge32, dsx3CurrentPLCPUASs Gauge32, dsx3CurrentPLCPFEBEs Gauge32, dsx3CurrentPLCPFEBEESs Gauge32, dsx3CurrentFEBEs Gauge32, dsx3CurrentPFEValidData TruthValue, dsx3CurrentPFEESACPs Gauge32, dsx3CurrentPFEESBCPs Gauge32, dsx3CurrentPFESASCPs Gauge32, dsx3CurrentPFEFCCPs Gauge32 } dsx3CurrentIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3CurrentEntry 1 } dsx3CurrentValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the current table." ::= { dsx3CurrentEntry 2 } dsx3CurrentLESAs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESA-L encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 3 } dsx3CurrentLESBs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESB-L encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 4 } dsx3CurrentLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SES-L encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 5 } dsx3CurrentLLOSSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LOSS-L encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 6 } dsx3CurrentPESAPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESAP-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 7 } dsx3CurrentPESBPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBP-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 8 } dsx3CurrentPESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 9 } dsx3CurrentPESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 10 } dsx3CurrentPAISSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of AISS-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 11 } dsx3CurrentPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 12 } dsx3CurrentPFCs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FC-P encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 13 } dsx3CurrentOCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 14 } dsx3CurrentOCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 15 } dsx3CurrentLCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 16 } dsx3CurrentLCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 17 } dsx3CurrentPLCPBIPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-BIP encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 18 } dsx3CurrentPLCPLOFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 19 } dsx3CurrentPLCPLOFESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 20 } dsx3CurrentPLCPYELs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 21 } dsx3CurrentPLCPYELESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 22 } dsx3CurrentPLCPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-CV encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 23 } dsx3CurrentPLCPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 24 } dsx3CurrentPLCPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 25 } dsx3CurrentPLCPSEFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SEF encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 26 } dsx3CurrentPLCPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-UAS encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 27 } dsx3CurrentPLCPFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 28 } dsx3CurrentPLCPFEBEESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE-ES encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 29 } dsx3CurrentFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FEBE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 30 } dsx3CurrentPFEValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the current table's Far End objects." ::= { dsx3CurrentEntry 31 } dsx3CurrentPFEESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-PFE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 32 } dsx3CurrentPFEESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-PFE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 33 } dsx3CurrentPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SASCP-PFE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 34 } dsx3CurrentPFEFCCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FCCP-PFE encountered by a DS3 interface in the current 15 minute interval." ::= { dsx3CurrentEntry 35 } dsx3IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals." ::= { ds3SuppMIB 3 } dsx3IntervalEntry OBJECT-TYPE SYNTAX Dsx3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Interval table." INDEX { dsx3IntervalIndex, dsx3IntervalNumber } ::= { dsx3IntervalTable 1 } Dsx3IntervalEntry ::= SEQUENCE { dsx3IntervalIndex InterfaceIndex, dsx3IntervalNumber INTEGER, dsx3IntervalValidData TruthValue, dsx3IntervalLESAs Gauge32, dsx3IntervalLESBs Gauge32, dsx3IntervalLLOSSs Gauge32, dsx3IntervalLSESs Gauge32, dsx3IntervalPESAPs Gauge32, dsx3IntervalPESBPs Gauge32, dsx3IntervalPESACPs Gauge32, dsx3IntervalPESBCPs Gauge32, dsx3IntervalPAISSs Gauge32, dsx3IntervalPUASCPs Gauge32, dsx3IntervalPFCs Gauge32, dsx3IntervalOCDs Gauge32, dsx3IntervalOCDESs Gauge32, dsx3IntervalLCDs Gauge32, dsx3IntervalLCDESs Gauge32, dsx3IntervalPLCPBIPs Gauge32, dsx3IntervalPLCPLOFs Gauge32, dsx3IntervalPLCPLOFESs Gauge32, dsx3IntervalPLCPYELs Gauge32, dsx3IntervalPLCPYELESs Gauge32, dsx3IntervalPLCPCVs Gauge32, dsx3IntervalPLCPESs Gauge32, dsx3IntervalPLCPSESs Gauge32, dsx3IntervalPLCPSEFs Gauge32, dsx3IntervalPLCPUASs Gauge32, dsx3IntervalPLCPFEBEs Gauge32, dsx3IntervalPLCPFEBEESs Gauge32, dsx3IntervalFEBEs Gauge32, dsx3IntervalPFEValidData TruthValue, dsx3IntervalPFEESACPs Gauge32, dsx3IntervalPFEESBCPs Gauge32, dsx3IntervalPFESASCPs Gauge32, dsx3IntervalPFEFCCPs Gauge32 } dsx3IntervalIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3IntervalEntry 1 } dsx3IntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..96) ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1." ::= { dsx3IntervalEntry 2 } dsx3IntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the interval table." ::= { dsx3IntervalEntry 3 } dsx3IntervalLESAs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESA-L encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 4 } dsx3IntervalLESBs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESB-L encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 5 } dsx3IntervalLLOSSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LOSS-L encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 6 } dsx3IntervalLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SES-L encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 7 } dsx3IntervalPESAPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESAP-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 8 } dsx3IntervalPESBPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBP-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 9 } dsx3IntervalPESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 10 } dsx3IntervalPESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 11 } dsx3IntervalPAISSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of AISS-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 12 } dsx3IntervalPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 13 } dsx3IntervalPFCs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FC-P encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 14 } dsx3IntervalOCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 15 } dsx3IntervalOCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 16 } dsx3IntervalLCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 17 } dsx3IntervalLCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 18 } dsx3IntervalPLCPBIPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-BIP encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 19 } dsx3IntervalPLCPLOFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 20 } dsx3IntervalPLCPLOFESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 21 } dsx3IntervalPLCPYELs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 22 } dsx3IntervalPLCPYELESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 23 } dsx3IntervalPLCPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-CV encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 24 } dsx3IntervalPLCPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 25 } dsx3IntervalPLCPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 26 } dsx3IntervalPLCPSEFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SEF encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 27 } dsx3IntervalPLCPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-UAS encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 28 } dsx3IntervalPLCPFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 29 } dsx3IntervalPLCPFEBEESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE-ES encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 30 } dsx3IntervalFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FEBEs encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 31 } dsx3IntervalPFEValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the interval table's Far End objects." ::= { dsx3IntervalEntry 32 } dsx3IntervalPFEESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-PFE encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 33 } dsx3IntervalPFEESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-PFE encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 34 } dsx3IntervalPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SASCP-PFE encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 35 } dsx3IntervalPFEFCCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FCCP-PFE encountered by a DS3 interface in the individual 15 minute interval." ::= { dsx3IntervalEntry 36 } dsx3TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval." ::= { ds3SuppMIB 4 } dsx3TotalEntry OBJECT-TYPE SYNTAX Dsx3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Total table." INDEX { dsx3TotalIndex } ::= { dsx3TotalTable 1 } Dsx3TotalEntry ::= SEQUENCE { dsx3TotalIndex InterfaceIndex, dsx3TotalValidData TruthValue, dsx3TotalLESAs Gauge32, dsx3TotalLESBs Gauge32, dsx3TotalLLOSSs Gauge32, dsx3TotalLSESs Gauge32, dsx3TotalPESAPs Gauge32, dsx3TotalPESBPs Gauge32, dsx3TotalPESACPs Gauge32, dsx3TotalPESBCPs Gauge32, dsx3TotalPAISSs Gauge32, dsx3TotalPUASCPs Gauge32, dsx3TotalPFCs Gauge32, dsx3TotalOCDs Gauge32, dsx3TotalOCDESs Gauge32, dsx3TotalLCDs Gauge32, dsx3TotalLCDESs Gauge32, dsx3TotalPLCPBIPs Gauge32, dsx3TotalPLCPLOFs Gauge32, dsx3TotalPLCPLOFESs Gauge32, dsx3TotalPLCPYELs Gauge32, dsx3TotalPLCPYELESs Gauge32, dsx3TotalPLCPCVs Gauge32, dsx3TotalPLCPESs Gauge32, dsx3TotalPLCPSESs Gauge32, dsx3TotalPLCPSEFs Gauge32, dsx3TotalPLCPUASs Gauge32, dsx3TotalPLCPFEBEs Gauge32, dsx3TotalPLCPFEBEESs Gauge32, dsx3TotalFEBEs Gauge32, dsx3TotalPFEValidData TruthValue, dsx3TotalPFEESACPs Gauge32, dsx3TotalPFEESBCPs Gauge32, dsx3TotalPFESASCPs Gauge32, dsx3TotalPFEFCCPs Gauge32 } dsx3TotalIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3TotalEntry 1 } dsx3TotalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the Total table." ::= { dsx3TotalEntry 2 } dsx3TotalLESAs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESA-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 3 } dsx3TotalLESBs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESB-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 4 } dsx3TotalLLOSSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LOSS-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 5 } dsx3TotalLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SES-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 6 } dsx3TotalPESAPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESAP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 7 } dsx3TotalPESBPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 8 } dsx3TotalPESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 9 } dsx3TotalPESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 10 } dsx3TotalPAISSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of AISS-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 11 } dsx3TotalPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 12 } dsx3TotalPFCs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FC-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 13 } dsx3TotalOCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 14 } dsx3TotalOCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 15 } dsx3TotalLCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD encountered by a DS3 interface in the interval 24 hour Total." ::= { dsx3TotalEntry 16 } dsx3TotalLCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD-ES encountered by a DS3 interface in the interval 24 hour Total." ::= { dsx3TotalEntry 17 } dsx3TotalPLCPBIPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-BIP encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 18 } dsx3TotalPLCPLOFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 19 } dsx3TotalPLCPLOFESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 20 } dsx3TotalPLCPYELs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 21 } dsx3TotalPLCPYELESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 22 } dsx3TotalPLCPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-CV encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 23 } dsx3TotalPLCPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 24 } dsx3TotalPLCPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 25 } dsx3TotalPLCPSEFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SEF encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 26 } dsx3TotalPLCPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-UAS encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 27 } dsx3TotalPLCPFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 28 } dsx3TotalPLCPFEBEESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 29 } dsx3TotalFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FEBEs encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 30 } dsx3TotalPFEValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the Total table's Far End objects." ::= { dsx3TotalEntry 31 } dsx3TotalPFEESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 32 } dsx3TotalPFEESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 33 } dsx3TotalPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 34 } dsx3TotalPFEFCCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FCCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3TotalEntry 35 } dsx3DayIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3DayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of up to 3 days DS3 statistic totals for each interface. These totals record up to three days (current, recent, and previous) worth of cummulative statistics. Invalid 15 minute intervals count as 0." ::= { ds3SuppMIB 5 } dsx3DayIntervalEntry OBJECT-TYPE SYNTAX Dsx3DayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One recent day's worth of DS3 statistic totals for an interface." INDEX { dsx3DayIntervalIndex, dsx3DayIntervalNumber } ::= { dsx3DayIntervalTable 1 } Dsx3DayIntervalEntry ::= SEQUENCE { dsx3DayIntervalIndex InterfaceIndex, dsx3DayIntervalNumber INTEGER, dsx3DayIntervalValidData TruthValue, dsx3DayIntervalPESs Gauge32, dsx3DayIntervalPSESs Gauge32, dsx3DayIntervalSEFSs Gauge32, dsx3DayIntervalUASs Gauge32, dsx3DayIntervalLCVs Gauge32, dsx3DayIntervalPCVs Gauge32, dsx3DayIntervalLESs Gauge32, dsx3DayIntervalCCVs Gauge32, dsx3DayIntervalCESs Gauge32, dsx3DayIntervalCSESs Gauge32, dsx3DayIntervalLESAs Gauge32, dsx3DayIntervalLESBs Gauge32, dsx3DayIntervalLLOSSs Gauge32, dsx3DayIntervalLSESs Gauge32, dsx3DayIntervalPESAPs Gauge32, dsx3DayIntervalPESBPs Gauge32, dsx3DayIntervalPESACPs Gauge32, dsx3DayIntervalPESBCPs Gauge32, dsx3DayIntervalPAISSs Gauge32, dsx3DayIntervalPUASCPs Gauge32, dsx3DayIntervalPFCs Gauge32, dsx3DayIntervalOCDs Gauge32, dsx3DayIntervalOCDESs Gauge32, dsx3DayIntervalLCDs Gauge32, dsx3DayIntervalLCDESs Gauge32, dsx3DayIntervalPLCPBIPs Gauge32, dsx3DayIntervalPLCPLOFs Gauge32, dsx3DayIntervalPLCPLOFESs Gauge32, dsx3DayIntervalPLCPYELs Gauge32, dsx3DayIntervalPLCPYELESs Gauge32, dsx3DayIntervalPLCPCVs Gauge32, dsx3DayIntervalPLCPESs Gauge32, dsx3DayIntervalPLCPSEFs Gauge32, dsx3DayIntervalPLCPSESs Gauge32, dsx3DayIntervalPLCPUASs Gauge32, dsx3DayIntervalPLCPFEBEs Gauge32, dsx3DayIntervalPLCPFEBEESs Gauge32, dsx3DayIntervalFEBEs Gauge32, dsx3DayIntervalPFECESs Gauge32, dsx3DayIntervalPFECSESs Gauge32, dsx3DayIntervalPFECCVs Gauge32, dsx3DayIntervalPFEUASs Gauge32, dsx3DayIntervalPFEValidData TruthValue, dsx3DayIntervalPFEESACPs Gauge32, dsx3DayIntervalPFEESBCPs Gauge32, dsx3DayIntervalPFESASCPs Gauge32, dsx3DayIntervalPFEFCCPs Gauge32 } dsx3DayIntervalIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3DayIntervalEntry 1 } dsx3DayIntervalNumber OBJECT-TYPE SYNTAX INTEGER(1..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number between 1 and 3, where 1 is the most recently completed 24 hour interval and 3 is the 24 hour interval completed 48 hours prior to interval 1. These totals record up to three days (current, recent, and previous) worth of cummulative statistics." ::= { dsx3DayIntervalEntry 2 } dsx3DayIntervalValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates if there is valid data for this day interval." DEFVAL { true } ::= { dsx3DayIntervalEntry 3 } dsx3DayIntervalPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESP-P P-bit Errored Seconds, encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 4 } dsx3DayIntervalPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SESP-P P-bit Severely Errored Seconds, encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 5 } dsx3DayIntervalSEFSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SAS-P Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 6 } dsx3DayIntervalUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASP-P Unavailable Seconds, encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 7 } dsx3DayIntervalLCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CV-L Line Coding Violations encountered by a DS3/E3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 8 } dsx3DayIntervalPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CV-P P-bit Coding Violations, encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 9 } dsx3DayIntervalLESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ES-L Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 10 } dsx3DayIntervalCCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CVCP-P C-bit Coding Violations encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 11 } dsx3DayIntervalCESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESCP-P C-bit Errored Seconds encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 12 } dsx3DayIntervalCSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SESCP-P C-bit Severely Errored Seconds encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 13 } dsx3DayIntervalLESAs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESA-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 14 } dsx3DayIntervalLESBs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESB-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 15 } dsx3DayIntervalLLOSSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LOSS-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 16 } dsx3DayIntervalLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SES-L encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 17 } dsx3DayIntervalPESAPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESAP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 18 } dsx3DayIntervalPESBPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 19 } dsx3DayIntervalPESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 20 } dsx3DayIntervalPESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 21 } dsx3DayIntervalPAISSs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of AISS-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 22 } dsx3DayIntervalPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 23 } dsx3DayIntervalPFCs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FC-P encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 24 } dsx3DayIntervalOCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 25 } dsx3DayIntervalOCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of OCD-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 26 } dsx3DayIntervalLCDESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD-ES encountered by a DS3 interface in the interval 24 hour interval." ::= { dsx3DayIntervalEntry 27 } dsx3DayIntervalLCDs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of LCD encountered by a DS3 interface in the interval 24 hour interval." ::= { dsx3DayIntervalEntry 28 } dsx3DayIntervalPLCPBIPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-BIP encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 29 } dsx3DayIntervalPLCPLOFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 30 } dsx3DayIntervalPLCPLOFESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-LOF-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 31 } dsx3DayIntervalPLCPYELs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 32 } dsx3DayIntervalPLCPYELESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-YEL-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 33 } dsx3DayIntervalPLCPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-CV encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 34 } dsx3DayIntervalPLCPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 35 } dsx3DayIntervalPLCPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 36 } dsx3DayIntervalPLCPSEFs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-SEF encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 37 } dsx3DayIntervalPLCPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-UAS encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 38 } dsx3DayIntervalPLCPFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 39 } dsx3DayIntervalPLCPFEBEESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of PLCP-FEBE-ES encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 40 } dsx3DayIntervalFEBEs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FEBEs encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 41 } dsx3DayIntervalPFECESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESCP-PFE C-bit Errored Seconds encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 42 } dsx3DayIntervalPFECSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SESCP-PFE C-bit Severely Errored Seconds encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 43 } dsx3DayIntervalPFECCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CVCP-PFE C-bit Coding Violations encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 44 } dsx3DayIntervalPFEUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of UASCP-PFE Unavailable Seconds, encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 45 } dsx3DayIntervalPFEValidData OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is valid data for the Day Interval table's Far End objects." DEFVAL { true } ::= { dsx3DayIntervalEntry 46 } dsx3DayIntervalPFEESACPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESACP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 47 } dsx3DayIntervalPFEESBCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ESBCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 48 } dsx3DayIntervalPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of SASCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 49 } dsx3DayIntervalPFEFCCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of FCCP-PFE encountered by a DS3 interface in the individual 24 hour interval." ::= { dsx3DayIntervalEntry 50 } dsx3CurrentThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3CurrentThresholdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Thresholds on parameters for the current 15 minute interval per interface." ::= { ds3SuppMIB 6 } dsx3CurrentThresholdEntry OBJECT-TYPE SYNTAX Dsx3CurrentThresholdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Thresholds for the current 15 minute interval for a particular interface. If thesholding is not supported on a particular parameter, the error 'noSuchObject' should be returned." INDEX { dsx3CurrentThresholdIndex } ::= { dsx3CurrentThresholdTable 1 } Dsx3CurrentThresholdEntry ::= SEQUENCE { dsx3CurrentThresholdIndex InterfaceIndex, dsx3CurrentThresholdLCVs Gauge32, dsx3CurrentThresholdLESs Gauge32, dsx3CurrentThresholdLSESs Gauge32, dsx3CurrentThresholdPCVs Gauge32, dsx3CurrentThresholdPESs Gauge32, dsx3CurrentThresholdPSESs Gauge32, dsx3CurrentThresholdPSASs Gauge32, dsx3CurrentThresholdPUASs Gauge32, dsx3CurrentThresholdPCVCPs Gauge32, dsx3CurrentThresholdPESCPs Gauge32, dsx3CurrentThresholdPSESCPs Gauge32, dsx3CurrentThresholdPSASCPs Gauge32, dsx3CurrentThresholdPUASCPs Gauge32, dsx3CurrentThresholdESxs Gauge32, dsx3CurrentThresholdPFECVCPs Gauge32, dsx3CurrentThresholdPFEESCPs Gauge32, dsx3CurrentThresholdPFESESCPs Gauge32, dsx3CurrentThresholdPFESASCPs Gauge32, dsx3CurrentThresholdPFEUASCPs Gauge32 } dsx3CurrentThresholdIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3CurrentThresholdEntry 1 } dsx3CurrentThresholdLCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Code Violations encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 13296 } ::= { dsx3CurrentThresholdEntry 2 } dsx3CurrentThresholdLESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 65 } ::= { dsx3CurrentThresholdEntry 3 } dsx3CurrentThresholdLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Severly Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 4 } dsx3CurrentThresholdPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Coding Violations encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 13296 } ::= { dsx3CurrentThresholdEntry 5 } dsx3CurrentThresholdPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 65 } ::= { dsx3CurrentThresholdEntry 6 } dsx3CurrentThresholdPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Severely Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 7 } dsx3CurrentThresholdPSASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 2 } ::= { dsx3CurrentThresholdEntry 8 } dsx3CurrentThresholdPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Unavailable Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 9 } dsx3CurrentThresholdPCVCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Coding Violations encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 13296 } ::= { dsx3CurrentThresholdEntry 10 } dsx3CurrentThresholdPESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 65 } ::= { dsx3CurrentThresholdEntry 11 } dsx3CurrentThresholdPSESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Severely Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 12 } dsx3CurrentThresholdPSASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 2 } ::= { dsx3CurrentThresholdEntry 13 } dsx3CurrentThresholdPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Unavailable Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 14 } dsx3CurrentThresholdESxs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on x number of defects in Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 44 } ::= { dsx3CurrentThresholdEntry 15 } dsx3CurrentThresholdPFECVCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Coding Violations encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 13296 } ::= { dsx3CurrentThresholdEntry 16 } dsx3CurrentThresholdPFEESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 65 } ::= { dsx3CurrentThresholdEntry 17 } dsx3CurrentThresholdPFESESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Severely Errored Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 18 } dsx3CurrentThresholdPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 2 } ::= { dsx3CurrentThresholdEntry 19 } dsx3CurrentThresholdPFEUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Unavailable Seconds encountered by a DS3 interface in the current 15 minute interval." DEFVAL { 10 } ::= { dsx3CurrentThresholdEntry 20 } dsx3DayThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx3DayThresholdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Thresholds on parameters for the current 24 hour interval per interface." ::= { ds3SuppMIB 7 } dsx3DayThresholdEntry OBJECT-TYPE SYNTAX Dsx3DayThresholdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Thresholds on parameters for the current 24 hour interval for a particular interface. If thesholding is not supported on a particular parameter, the error 'noSuchObject' should be returned." INDEX { dsx3DayThresholdIndex } ::= { dsx3DayThresholdTable 1 } Dsx3DayThresholdEntry ::= SEQUENCE { dsx3DayThresholdIndex InterfaceIndex, dsx3DayThresholdLCVs Gauge32, dsx3DayThresholdLESs Gauge32, dsx3DayThresholdLSESs Gauge32, dsx3DayThresholdPCVs Gauge32, dsx3DayThresholdPESs Gauge32, dsx3DayThresholdPSESs Gauge32, dsx3DayThresholdPSASs Gauge32, dsx3DayThresholdPUASs Gauge32, dsx3DayThresholdPCVCPs Gauge32, dsx3DayThresholdPESCPs Gauge32, dsx3DayThresholdPSESCPs Gauge32, dsx3DayThresholdPSASCPs Gauge32, dsx3DayThresholdPUASCPs Gauge32, dsx3DayThresholdESxs Gauge32, dsx3DayThresholdPFECVCPs Gauge32, dsx3DayThresholdPFEESCPs Gauge32, dsx3DayThresholdPFESESCPs Gauge32, dsx3DayThresholdPFESASCPs Gauge32, dsx3DayThresholdPFEUASCPs Gauge32 } dsx3DayThresholdIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance." ::= { dsx3DayThresholdEntry 1 } dsx3DayThresholdLCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Code Violations encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 132960 } ::= { dsx3DayThresholdEntry 2 } dsx3DayThresholdLESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 648 } ::= { dsx3DayThresholdEntry 3 } dsx3DayThresholdLSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Line Severly Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 100 } ::= { dsx3DayThresholdEntry 4 } dsx3DayThresholdPCVs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Coding Violations encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 132960 } ::= { dsx3DayThresholdEntry 5 } dsx3DayThresholdPESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 648 } ::= { dsx3DayThresholdEntry 6 } dsx3DayThresholdPSESs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Severely Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 100 } ::= { dsx3DayThresholdEntry 7 } dsx3DayThresholdPSASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 17 } ::= { dsx3DayThresholdEntry 8 } dsx3DayThresholdPUASs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of Path Unavailable Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 10 } ::= { dsx3DayThresholdEntry 9 } dsx3DayThresholdPCVCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Coding Violations encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 132960 } ::= { dsx3DayThresholdEntry 10 } dsx3DayThresholdPESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 648 } ::= { dsx3DayThresholdEntry 11 } dsx3DayThresholdPSESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Severely Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 100 } ::= { dsx3DayThresholdEntry 12 } dsx3DayThresholdPSASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 17 } ::= { dsx3DayThresholdEntry 13 } dsx3DayThresholdPUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Unavailable Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 10 } ::= { dsx3DayThresholdEntry 14 } dsx3DayThresholdESxs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on x number of defects in Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 44 } ::= { dsx3DayThresholdEntry 15 } dsx3DayThresholdPFECVCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Coding Violations encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 132960 } ::= { dsx3DayThresholdEntry 16 } dsx3DayThresholdPFEESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 648 } ::= { dsx3DayThresholdEntry 17 } dsx3DayThresholdPFESESCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Severely Errored Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 100 } ::= { dsx3DayThresholdEntry 18 } dsx3DayThresholdPFESASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Severely Errored Framing/Alarm Indication Signal Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 17 } ::= { dsx3DayThresholdEntry 19 } dsx3DayThresholdPFEUASCPs OBJECT-TYPE SYNTAX Gauge32 ACCESS read-write STATUS mandatory DESCRIPTION "A threshold on the number of CP-bit Path Far End Unavailable Seconds encountered by a DS3 interface in the current 24 hour interval." DEFVAL { 10 } ::= { dsx3DayThresholdEntry 20 } END