ChrComNetClockSyncIf-MIB

--FORCE-INCLUDE	<mib.h>
--FORCE-INCLUDE	<snmpdefs.h>
--FORCE-INCLUDE	"mibhand.h"

	DEFINITIONS  ::=  BEGIN

IMPORTS
	OBJECT-TYPE, Counter32			FROM  SNMPv2-SMI
	Integer32, Unsigned32			FROM  SNMPv2-SMI
	chrComNetClockSync			FROM  Chromatis-MIB
	ClockIfType				FROM  NetClockTypes-MIB
	EnaDis					FROM  ChrTyp-MIB
	ClockSource				FROM  NetClockTypes-MIB
	ExternalRefStatus			FROM  NetClockTypes-MIB;

-- chrComNetClockSyncIf Table

chrComNetClockSyncIfTable		OBJECT-TYPE
	SYNTAX		SEQUENCE OF ChrComNetClockSyncIfEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
	""
	::= { chrComNetClockSync 16}

chrComNetClockSyncIfEntry		OBJECT-TYPE
	SYNTAX		ChrComNetClockSyncIfEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
	""
	INDEX  {  chrComNetClockSyncifIndex }

--DEFAULT  get-function-async  MNIL_GetRoutine
--DEFAULT  set-function-async  MNIL_SetRoutine
--DEFAULT  next-function-async MNIL_NextRoutine
--DEFAULT  test-function-async MNIL_TestRoutine
--DEFAULT  cookie "If"
	::= { chrComNetClockSyncIfTable  1 }

ChrComNetClockSyncIfEntry  ::=
	SEQUENCE  {
	chrComNetClockSyncifIndex			Unsigned32	(0..4294967295),
	chrComNetClockSyncIfType			ClockIfType,
	chrComNetClockSyncExternalOutEn		EnaDis,
	chrComNetClockSyncExternalOutSrc		ClockSource,
	chrComNetClockSyncExternalOutIfIndex	Unsigned32,
	chrComNetClockSyncExternalRefStatus	ExternalRefStatus,
	chrComNetClockSyncAlarmVector		Integer32	(0..65535),
	chrComNetClockSyncAlarmSeverity		Unsigned32	(0..4294967295)
}

chrComNetClockSyncifIndex 	OBJECT-TYPE
	SYNTAX		Unsigned32	(0..4294967295)
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
	"Index referring to the interface table. interface table."
	::= { chrComNetClockSyncIfEntry  1 }

chrComNetClockSyncIfType 	OBJECT-TYPE
	SYNTAX		ClockIfType
	MAX-ACCESS 	read-write
	STATUS 		current
	DESCRIPTION
	"Choosing frequency and format for external synchronizing signal.
E1-2048 MHz
DS1-1544 MHz
table."
	::= { chrComNetClockSyncIfEntry  2 }

chrComNetClockSyncExternalOutEn 	OBJECT-TYPE
	SYNTAX		EnaDis
	MAX-ACCESS 	read-write
	STATUS 		current
	DESCRIPTION
	"Enables or disables output signal on external interfaces A and B"
	::= { chrComNetClockSyncIfEntry  3 }

chrComNetClockSyncExternalOutSrc 	OBJECT-TYPE
	SYNTAX		ClockSource
	MAX-ACCESS 	read-write
	STATUS 		current
	DESCRIPTION
	"The clock source used for External Output"
	::= { chrComNetClockSyncIfEntry  4 }

chrComNetClockSyncExternalOutIfIndex 	OBJECT-TYPE
	SYNTAX		Unsigned32	(0..4294967295)
	MAX-ACCESS 	read-write
	STATUS 		current
	DESCRIPTION
	"Sonet Line IfIndex of Sonet Interface used as clock source for External Output"
	::= { chrComNetClockSyncIfEntry  5 }

chrComNetClockSyncExternalRefStatus 	OBJECT-TYPE
	SYNTAX		ExternalRefStatus
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
	"Indicates the status of external reference"
	::= { chrComNetClockSyncIfEntry  6 }

chrComNetClockSyncAlarmVector 	OBJECT-TYPE
	SYNTAX		Integer32	(0..65535)
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
	"16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state. 
0. External reference fault
metropolisSyncIfExternalReferenceFault
"
	::= { chrComNetClockSyncIfEntry  7 }

chrComNetClockSyncAlarmSeverity 	OBJECT-TYPE
	SYNTAX		Unsigned32	(0..4294967295)
	MAX-ACCESS 	read-write
	STATUS 		current
	DESCRIPTION
	""
	::= { chrComNetClockSyncIfEntry  8 }


END