CPQN5226A-MIB DEFINITIONS ::= BEGIN -- -- April 22, 1997 -- -- This MIB is designed for the Agent for the Compaq 5226A Switch -- of products. -- -- Management Software will refer to any SNMP based Network Management -- Application. -- -- Note that the term DURABLE implies that the value for the object is -- stored in the NVRAM of the unit and will be retained across power -- cycles. -- IMPORTS enterprises, Counter FROM RFC1155-SMI DisplayString, ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 CpqnRowStatus FROM CPQNUNIF-MIB TRAP-TYPE FROM RFC-1215; compaq OBJECT IDENTIFIER ::= { enterprises 232 } compaq-dallas-npd OBJECT IDENTIFIER ::= { compaq 101 } switchedMedia OBJECT IDENTIFIER ::= { compaq-dallas-npd 2 } cpqn52nn OBJECT IDENTIFIER ::= { switchedMedia 2 } cpqn52nnOIDInfo OBJECT IDENTIFIER ::= { cpqn52nn 1 } cpqn52nnModuleInfo OBJECT IDENTIFIER ::= { cpqn52nn 2 } cpqn52nnMemoryInfo OBJECT IDENTIFIER ::= { cpqn52nn 3 } cpqn52nnPortInfo OBJECT IDENTIFIER ::= { cpqn52nn 4 } cpqn52nnIfStatusInfo OBJECT IDENTIFIER ::= { cpqn52nn 5 } cpqn52nnIfStatsInfo OBJECT IDENTIFIER ::= { cpqn52nn 6 } cpqn52nnSwitchStatsInfo OBJECT IDENTIFIER ::= { cpqn52nn 7 } cpqn52nnBusMonitorInfo OBJECT IDENTIFIER ::= { cpqn52nn 8 } cpqn52nnHashInfo OBJECT IDENTIFIER ::= { cpqn52nnMemoryInfo 1 } cpqn52nnRmonMemory OBJECT IDENTIFIER ::= { cpqn52nnMemoryInfo 2 } cpqn52nnMemoryThreshold OBJECT IDENTIFIER ::= { cpqn52nnMemoryInfo 3 } cpqn52nnDramInfo OBJECT IDENTIFIER ::= { cpqn52nnMemoryInfo 4 } cpqn52nnHashMemory OBJECT IDENTIFIER ::= { cpqn52nnSwitchStatsInfo 1 } cpqn52nnDropPkts OBJECT IDENTIFIER ::= { cpqn52nnSwitchStatsInfo 2 } cpqn52nnQuadCascade OBJECT IDENTIFIER ::= { cpqn52nnIfStatsInfo 1 } cpqn52nnTlan OBJECT IDENTIFIER ::= { cpqn52nnIfStatsInfo 2 } -- -- The OIDInfo Group: This group contains nodes representing the sysObjectIDs -- for all units that support this Enterprise MIB. -- cpqn5226 OBJECT IDENTIFIER ::= { cpqn52nnOIDInfo 1 } cpqn5226A OBJECT IDENTIFIER ::= { cpqn52nnOIDInfo 3 } -- -- The ModuleInfo Group: This group contains MIB objects that pertain to the -- Switch unit and its operation. Some of the parameters provide information -- but most allow the user to set parameters which will affect the operation -- of the Switch. Care must be taken when setting these parameters as changes -- may drastically affect the Switch's operation. -- -- The 5226 and 5226A first release version will only include objects 1-4 -- cpqn52nnVT100ScreenRefresh OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (e.g., statistics). The default value will be 5 seconds." ::= { cpqn52nnModuleInfo 1 } cpqn52nnBooterWriteCycles OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object will allow the user to see the number of erase/writes that have been made to the Booter firmware sectors on the FLASH PROM chip." ::= { cpqn52nnModuleInfo 2 } cpqn52nnRuntimeWriteCycles OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object will allow the user to see the number of erase/writes that have been made to the Runtime firmware sectors on the FLASH PROM chip." ::= { cpqn52nnModuleInfo 3 } cpqn52nnSwitchModeType OBJECT-TYPE SYNTAX INTEGER { store-and-forward(1), cut-through(2), fragment-free(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: This object will determine the operational mode of the switch. The default will be store-and-forward(1). Fragment-free is not supported on 5226 nor 5226A." ::= { cpqn52nnModuleInfo 4 } cpqn52nnCreateTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The minimum number of 5 minute intervals a table entry can have a status of underCreate before the agent may delete the object. The default value will be 1 5 minute interval." ::= { cpqn52nnModuleInfo 5 } -- -- Power Supply Table: This table will supply information regarding the -- power supplies in the unit. The table will always return 2 entries, one -- for each supply. If a supply is in and working the status will be on(1). -- If a supply is in but bad or has no power, the status will be off(2). If -- the supply is not in, the status is na(3). -- -- The 5226 version will not include this Table. -- cpqn52nnPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of system power supply specific information." ::= { cpqn52nnModuleInfo 6 } cpqn52nnPowerSupplyEntry OBJECT-TYPE SYNTAX Cpqn52nnPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for every power supply installed" INDEX { cpqn52nnPsIndex } ::= { cpqn52nnPowerSupplyTable 1 } Cpqn52nnPowerSupplyEntry ::= SEQUENCE { cpqn52nnPsIndex INTEGER, cpqn52nnPsStatus INTEGER } cpqn52nnPsIndex OBJECT-TYPE SYNTAX INTEGER { power-supply-a(1), -- Power Supply A power-supply-b(2) -- Power Supply B } ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each power supply." ::= { cpqn52nnPowerSupplyEntry 1 } cpqn52nnPsStatus OBJECT-TYPE SYNTAX INTEGER { good(1), -- power supply exists and operates okay bad(2), -- power supply exists but is bad or no power applied not-present(3) -- power supply does not exist } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply. The value good(1) is returned if the power supply identified by cpqn52nnPSIndex is running properly. The value bad(2) is returned if the power supply identified by cpqn52nnPSIndex has failed to operate properly but has been inserted into the slot. This will include an inserted power supply with no power. The value na(3) is returned if the power supply has not been inserted into the slot." ::= { cpqn52nnPowerSupplyEntry 2 } -- -- The cpqn52nnHashInfo Group: This group consists of a subset of objects which -- allow the user to get more information on the Hash Table mechanism. -- -- cpqn52nnHashTableSize OBJECT-TYPE SYNTAX INTEGER { eight-K(1), -- 8 K sixteen-K(2), -- 16 K thirty-two-K(3), -- 32 K sixty-four-K(4) -- 64 K } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The number of address table entries, in 1024 increments, allowed for the switch. NOTE that a smaller size table will increase the likelihood of broadcasts based on unknown unicasts i.e. addresses that have not been learned. The 5226 and 5226A allows set of 8K only." ::= { cpqn52nnHashInfo 1 } -- -- The cpqn52nnRmonMemory Group: This group consists of a subset of objects which -- allow the user to control how much memory is allocated to the individual -- RMON group implementations (4 group RMON). -- -- The 5226 version will not support this group. The 5226A first release version will -- not support this group. -- cpqn52nnMaxMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that can be used for RMON. Actually this number does not include some overhead needed to support the software. This number should be set in the implementation of the agent to assure that memory is always available for the overhead." ::= { cpqn52nnRmonMemory 1 } cpqn52nnMemAllocFailure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time of the last memory allocation failure that resulted from no more physical memory available in the agent. This value is in seconds" ::= { cpqn52nnRmonMemory 2 } cpqn52nnRmonMemoryCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Kbytes of memory RMON code may use, not counting any overhead." ::= { cpqn52nnRmonMemory 3 } cpqn52nnStatisticsMemoryCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Kbytes of memory that the RMON statistics group may use." ::= { cpqn52nnRmonMemory 4 } cpqn52nnHistoryMemoryCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Kbytes of memory that the RMON history group may use." ::= { cpqn52nnRmonMemory 5 } cpqn52nnAlarmMemoryCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Kbytes of memory that the RMON alarm group may use." ::= { cpqn52nnRmonMemory 6 } cpqn52nnEventMemoryCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Kbytes of memory that the RMON event group may use." ::= { cpqn52nnRmonMemory 7 } cpqn52nnRmonMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory used by RMON, rounded up." ::= { cpqn52nnRmonMemory 8 } cpqn52nnStatisticsMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that the RMON statistics group has used." ::= { cpqn52nnRmonMemory 9 } cpqn52nnHistoryMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that the RMON history group has used." ::= { cpqn52nnRmonMemory 10 } cpqn52nnAlarmMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that the RMON alarm group has used." ::= { cpqn52nnRmonMemory 11 } cpqn52nnEventMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that the RMON event group has used." ::= { cpqn52nnRmonMemory 12 } -- -- The cpqn52nnMemoryThreshold Group: -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnMaxPktMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kbytes of memory that can be used for Packet Memory." ::= { cpqn52nnMemoryThreshold 1 } cpqn52nnGlobalMemThreshTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enable Traps for all thresholding entries in the Global Memory group of objects. The default value is disabled." ::= { cpqn52nnMemoryThreshold 2 } cpqn52nnBcastMemThreshEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enable thresholding for the Broadcast packet count. The default value is disabled." ::= { cpqn52nnMemoryThreshold 3 } cpqn52nnBcastPktCeiling OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of broadcast packets allowed in packet buffer memory." ::= { cpqn52nnMemoryThreshold 4 } cpqn52nnBcastHysteresisCtl OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Number of packets that when added to the Bcast packet ceiling produces the Rising Threshold value of the maximum number of broadcast packets allowed in packet buffer memory." ::= { cpqn52nnMemoryThreshold 5 } cpqn52nnBcastPktCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of many broadcast packets are actually in packet buffer memory." ::= { cpqn52nnMemoryThreshold 6 } cpqn52nnBcastCongestionStatus OBJECT-TYPE SYNTAX INTEGER { congested(1), -- broadcast memory congested not-congested(2) -- broadcast memory not congested } ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of broadcast packet congestion. When congested, the number of broadcast packets in packet buffer memory has exceeded the rising threshold, but has not gone below the falling threshold." ::= { cpqn52nnMemoryThreshold 7 } cpqn52nnPortMemThreshTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnPortMemThreshEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines something." ::= { cpqn52nnMemoryThreshold 8 } cpqn52nnPortMemThreshEntry OBJECT-TYPE SYNTAX Cpqn52nnPortMemThreshEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each port. The index into the table is cpqn52nnPortThreshIfIndex." INDEX { cpqn52nnPortThreshIfIndex } ::= { cpqn52nnPortMemThreshTable 1 } Cpqn52nnPortMemThreshEntry ::= SEQUENCE { cpqn52nnPortThreshIfIndex INTEGER, cpqn52nnPortTxPktThreshEnable INTEGER, cpqn52nnPortTxPktCongestionStatus INTEGER, cpqn52nnPortTxPktCnt INTEGER, cpqn52nnPortTxPktCeiling INTEGER, cpqn52nnPortTxPktHysteresisCtl INTEGER, cpqn52nnPortRxMemThreshEnable INTEGER, cpqn52nnPortRxMemCongestionStatus INTEGER, cpqn52nnPortRxMemSectorCnt INTEGER, cpqn52nnPortRxMemCeiling INTEGER, cpqn52nnPortRxMemHysteresisCtl INTEGER, cpqn52nnPortCongestionTrapEnable INTEGER } cpqn52nnPortThreshIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Interface Index as represented in MIB-II." ::= { cpqn52nnPortMemThreshEntry 1 } cpqn52nnPortTxPktThreshEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enables or disabled transmit packet thresholding on a per port basis." ::= { cpqn52nnPortMemThreshEntry 2 } cpqn52nnPortTxPktCongestionStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of port transmit packet congestion. When congested, the number of transmit packets in packet buffer memory for the port has exceeded the rising threshold, but has not gone below the falling threshold." ::= { cpqn52nnPortMemThreshEntry 3 } cpqn52nnPortTxPktCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of how many transmit packets for the port are actually in packet buffer memory." ::= { cpqn52nnPortMemThreshEntry 4 } cpqn52nnPortTxPktCeiling OBJECT-TYPE SYNTAX INTEGER (0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of transmit packets allowed for the port in packet buffer memory." ::= { cpqn52nnPortMemThreshEntry 5 } cpqn52nnPortTxPktHysteresisCtl OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Number of packets that when added to the port's transmit packet ceiling produces the Rising Threshold value of the maximum number of transmit packets allowed for the port in packet buffer memory." ::= { cpqn52nnPortMemThreshEntry 6 } cpqn52nnPortRxMemThreshEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enables or disables receive memory thresholding on a per port basis." ::= { cpqn52nnPortMemThreshEntry 7 } cpqn52nnPortRxMemCongestionStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of port receive memory congestion. When congested, the amount of receive packet buffer memory used by the port has exceeded the rising threshold, but has not gone below the falling threshold." ::= { cpqn52nnPortMemThreshEntry 8 } cpqn52nnPortRxMemSectorCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicator of how amount Packet Receive memory, in 2Kbyte increments, is actually being used by the port." ::= { cpqn52nnPortMemThreshEntry 9 } cpqn52nnPortRxMemCeiling OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Value in 32Kbyte increments of the falling threshold of the maximum receive packet memory allowed for the port in packet buffer memory." ::= { cpqn52nnPortMemThreshEntry 10 } cpqn52nnPortRxMemHysteresisCtl OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Value in 2Kbyte increments that when added to the port's receive memory ceiling produces the Rising Threshold value of the maximum receive memory allowed for the port in packet buffer memory." ::= { cpqn52nnPortMemThreshEntry 11 } cpqn52nnPortCongestionTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enables or disabled traps due to congestion states for any Port." ::= { cpqn52nnPortMemThreshEntry 12 } -- -- The cpqn52nnDramTable Group: This table allows users to get information on -- the type, amount, and speed of the different DRAM components in the unit. -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnDramTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnDramEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the unit's Dram information." ::= { cpqn52nnDramInfo 1 } cpqn52nnDramEntry OBJECT-TYPE SYNTAX Cpqn52nnDramEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each Dram component. The index into the table is cpqn52nnDramIndex." INDEX { cpqn52nnDramIndex } ::= { cpqn52nnDramTable 1 } Cpqn52nnDramEntry ::= SEQUENCE { cpqn52nnDramIndex INTEGER, cpqn52nnDramSize INTEGER, cpqn52nnDramType INTEGER, cpqn52nnDramSpeed INTEGER } cpqn52nnDramIndex OBJECT-TYPE SYNTAX INTEGER { packet-buffers(1), -- Packet Buffer DRAM cpu-dram(2) -- General DRAM } ACCESS read-only STATUS mandatory DESCRIPTION "A simple index representing the area using the DRAM." ::= { cpqn52nnDramEntry 1 } cpqn52nnDramSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size of DRAM being used, in KBytes." ::= { cpqn52nnDramEntry 2 } cpqn52nnDramType OBJECT-TYPE SYNTAX INTEGER { fastpage-mode(1), edo(2), synchronous(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of DRAM being used." ::= { cpqn52nnDramEntry 3 } cpqn52nnDramSpeed OBJECT-TYPE SYNTAX INTEGER { dram-70ns(1), dram-60ns(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Speed of DRAM being used." ::= { cpqn52nnDramEntry 4 } -- -- The cpqn52nnPortStatusTable Group: For Port Information. The objects -- in this table will allow a user to gain additional Port info as -- well as configure the ports. -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnPortStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines certain Port Level parameters for each port." ::= { cpqn52nnPortInfo 1 } cpqn52nnPortStatusEntry OBJECT-TYPE SYNTAX Cpqn52nnPortStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each port. The index into the table is cpqn52nnPortStatusId." INDEX { cpqn52nnPortIfIndex, cpqn52nnPortIfMauIndex } ::= { cpqn52nnPortStatusTable 1 } Cpqn52nnPortStatusEntry ::= SEQUENCE { cpqn52nnPortIfIndex INTEGER, cpqn52nnPortIfMauIndex INTEGER, cpqn52nnPortName DisplayString, cpqn52nnPortType INTEGER, cpqn52nnMdiMdixStatus INTEGER, cpqn52nnMdiMdixEnable INTEGER } cpqn52nnPortIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Switch interface number that corresponds to the interface in MIB-II." ::= { cpqn52nnPortStatusEntry 1 } cpqn52nnPortIfMauIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the port in the CPQN52nn unit for which additional info is being obtained." ::= { cpqn52nnPortStatusEntry 2 } cpqn52nnPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: User defined name for port." ::= { cpqn52nnPortStatusEntry 3 } cpqn52nnPortType OBJECT-TYPE SYNTAX INTEGER { empty(1), -- empty port slot eth-10-baseT(2), -- ethernet 10 Base-T port tx(3), -- 100Base-TX fxsc(4), -- 100Base-FX with duplex SC connector fxst(5), -- 100Base-FX with ST connectors eth-10-100(6), -- ethernet 10/100 port fddi-das(7), -- Dual Attach FDDI Uplink (fiber) fddi-sas(8), -- Single Attach FDDI Uplink (fiber) fddi-sas-tp-pmd(9), -- Single Attach FDDI Uplink (utp) atm(10), -- ATM uplink unknown(1000) -- unknown port type } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies all possible port types. Note that unknown Port Types are represented by the value 1000." ::= { cpqn52nnPortStatusEntry 4 } cpqn52nnMdiMdixStatus OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdi-x(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies all possible port types." ::= { cpqn52nnPortStatusEntry 5 } cpqn52nnMdiMdixEnable OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdi-x(2), auto-sensing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies all possible port types." ::= { cpqn52nnPortStatusEntry 6 } -- -- The cpqn52nnPortMonitorTable Group: This table allows users to configure -- the Monitor Port feature. The basis for this table is that a single port -- is defined with a set of ports to monitor. Each row must be created -- uniquely using a Row Set. -- -- Note that there are currently only 2 entries allowed. -- -- cpqn52nnPortMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnPortMonitorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines monitor information." ::= { cpqn52nnPortInfo 2 } cpqn52nnPortMonitorEntry OBJECT-TYPE SYNTAX Cpqn52nnPortMonitorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table can be empty. Entries can be added as needed. The index into the table is cpqn52nnPortMonitorIndex." INDEX { cpqn52nnPortMonitorIndex } ::= { cpqn52nnPortMonitorTable 1 } Cpqn52nnPortMonitorEntry ::= SEQUENCE { cpqn52nnPortMonitorIndex INTEGER, cpqn52nnPortMonitorRowStatus CpqnRowStatus, cpqn52nnPortMonitorIfIndex INTEGER, cpqn52nnPortMonitoredIfMap INTEGER, cpqn52nnPortMonitoredDataType INTEGER } cpqn52nnPortMonitorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A simple index represnting the number of the entry being examined." ::= { cpqn52nnPortMonitorEntry 1 } cpqn52nnPortMonitorRowStatus OBJECT-TYPE SYNTAX CpqnRowStatus ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1)." ::= { cpqn52nnPortMonitorEntry 2 } cpqn52nnPortMonitorIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE An index based on the interface index in MIB-II. This will represent the interface to be used to monitor the data of others as defined by cpqn52nnPortMonitoredIfMap." ::= { cpqn52nnPortMonitorEntry 3 } cpqn52nnPortMonitoredIfMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: A bitmap indicating the ports whose data is being monitored. The bits used to represent the are the same as the IfIndex representation of the ports. e.g. port 25 --> 25th bit. An example is 0x00000003, indicates that ports 1 and 3 are being monitored. The port doing the monitoring is defined by cpqn52nnPortMonitorIfIndex for this row in the table." ::= { cpqn52nnPortMonitorEntry 4 } cpqn52nnPortMonitoredDataType OBJECT-TYPE SYNTAX INTEGER { tx-only(1), -- PortMonitor TX data from selected ports. rx-only(2), -- PortMonitor RX data from selected ports. both-tx-and-rx(3) -- PortMonitor TX & RX data from selected ports. } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The type of data to be monitored by the monitor port. Selecting TX or RX means that only the TX or RX data will be monitored by the monitor port." ::= { cpqn52nnPortMonitorEntry 5 } -- -- The cpqn52nnPortBondingTable Group: For Uplink Port Bonding. The objects -- in this table will allow a user to set up Bonding between the Uplink ports. -- A detailed explanation of Port Bonding is provided in the User Manual for -- the product. -- -- NOTE: Currently, only 2 entries are allowed with a bonding of only 2 ports. -- A port may be used more than once. -- -- The 5226 and 5226A first release will not support this group. -- cpqn52nnPortBondingTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnPortBondingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines uplink bonding information." ::= { cpqn52nnPortInfo 3 } cpqn52nnPortBondingEntry OBJECT-TYPE SYNTAX Cpqn52nnPortBondingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The index into the table is cpqn52nnBondIndex. The table can be empty." INDEX { cpqn52nnBondIndex } ::= { cpqn52nnPortBondingTable 1 } Cpqn52nnPortBondingEntry ::= SEQUENCE { cpqn52nnBondIndex INTEGER, cpqn52nnBondRowStatus CpqnRowStatus, cpqn52nnBondMap INTEGER } cpqn52nnBondIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A simple index representing the entry number." ::= { cpqn52nnPortBondingEntry 1 } cpqn52nnBondRowStatus OBJECT-TYPE SYNTAX CpqnRowStatus ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1)." ::= { cpqn52nnPortBondingEntry 2 } cpqn52nnBondMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: A bitmap indicating the uplink ports that are bonded together. The bits used to represent the uplink ports are the same as the If Index representations of the ports. e.g. port 25 --> 25th bit. An example is 0x05000000, indicates that uplink ports 25 and 27 are bonded." ::= { cpqn52nnPortBondingEntry 3 } -- -- The cpqn52nnIfStatusTable Group: For Interface Status Information. -- The objects in this table will allow a user to obtain additional -- status information on the sublayer switch interfaces that deliver packets -- to the forwarding module of the switch. This group also provides -- configuration parameters for the sublayer interfaces. -- -- The 5226 and 5226A first release version will support objects 1-3 only. -- cpqn52nnIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines certain switch interface level parameters for each interface." ::= { cpqn52nnIfStatusInfo 1 } cpqn52nnIfStatusEntry OBJECT-TYPE SYNTAX Cpqn52nnIfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each switch interface. The index into the table is cpqn52nnIfStatusIfIndex." INDEX { cpqn52nnIfStatusIfIndex } ::= { cpqn52nnIfStatusTable 1 } Cpqn52nnIfStatusEntry ::= SEQUENCE { cpqn52nnIfStatusIfIndex INTEGER, cpqn52nnIfStatusIfType INTEGER, cpqn52nnIfStpStatus INTEGER, cpqn52nnIfResetStatus INTEGER, cpqn52nnIfLearningStatus INTEGER, cpqn52nnIfAgingStatus INTEGER, cpqn52nnIfAgingTime INTEGER, cpqn52nnIfSwitchModeSrcStatus INTEGER, cpqn52nnIfSwitchModeDestStatus INTEGER, cpqn52nnIfSwitchModeSrc INTEGER, cpqn52nnIfSwitchModeDest INTEGER, cpqn52nnIfArbPriority INTEGER } cpqn52nnIfStatusIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface. " ::= { cpqn52nnIfStatusEntry 1 } cpqn52nnIfStatusIfType OBJECT-TYPE SYNTAX INTEGER { quad-cascade-lsi-l64381(1), tlan-ti-tnete110(2), qe110-lsi(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of device used for this switch interface." ::= { cpqn52nnIfStatusEntry 2 } cpqn52nnIfStpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not participate in the Spanning Tree algorithm. Default is enabled(1). DURABLE." ::= { cpqn52nnIfStatusEntry 3 } cpqn52nnIfResetStatus OBJECT-TYPE SYNTAX INTEGER { interface-not-resetting(1), -- standard answer for get request reset-interface(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object will allow the user to physically reset an interface on the CPQN52nn. The advantage over a general reset is that the other interfaces are left unaffected in their operation. The agent will always return interface-not-resetting(1) when the object is read." ::= { cpqn52nnIfStatusEntry 4 } cpqn52nnIfLearningStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learning state. When disabled(2), Spanning Tree must be set to disabled. Default is enabled(1). DURABLE." ::= { cpqn52nnIfStatusEntry 5 } cpqn52nnIfAgingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does not age entries in the address table. Default is enabled(1). DURABLE." ::= { cpqn52nnIfStatusEntry 6 } cpqn52nnIfAgingTime OBJECT-TYPE SYNTAX INTEGER (10..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. DURABLE" REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" ::= { cpqn52nnIfStatusEntry 7 } cpqn52nnIfSwitchModeSrcStatus OBJECT-TYPE SYNTAX INTEGER { store-and-forward(1), cut-through(2), fragment-free(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The switch mode for this interface when it is the Source in a switch transfer." ::= { cpqn52nnIfStatusEntry 8 } cpqn52nnIfSwitchModeDestStatus OBJECT-TYPE SYNTAX INTEGER { store-and-forward(1), cut-through(2), fragment-free(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The switch mode for this interface when it is the Destination in a switch transfer." ::= { cpqn52nnIfStatusEntry 9 } cpqn52nnIfSwitchModeSrc OBJECT-TYPE SYNTAX INTEGER { store-and-forward(1), cut-through(2), fragment-free(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The switch mode for this interface when it is the Source in a switch transfer. The default case is store-and-forward(1)." ::= { cpqn52nnIfStatusEntry 10 } cpqn52nnIfSwitchModeDest OBJECT-TYPE SYNTAX INTEGER { store-and-forward(1), cut-through(2), fragment-free(3) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The switch mode for this interface when it is the Destination in a switch transfer. The default case is store-and-forward(1)." ::= { cpqn52nnIfStatusEntry 11 } cpqn52nnIfArbPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The priority mechanism used for arbitration. The possible arbitration states and values are as follows: VALUE ARBITRATION ----- ----------- 0 First-Come-First-Served all port same Round Robin (Fair) all ports varied Round Robin (Weighted) The final case implies that not all ports have the same priority in which case a weighted Round Robin method of arbitration would be used. The default case has all ports with a value of 0 (First-Come-First-Served)." ::= { cpqn52nnIfStatusEntry 12 } -- -- The cpqn52nnQuadIfTable: This table allows the user to get -- information about configuration and statistics for ports on the -- Quad-Cascades. -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnQuadIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnQuadIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides information, on a per port basis, for the Quad Cascade devices." ::= { cpqn52nnQuadCascade 1 } cpqn52nnQuadIfEntry OBJECT-TYPE SYNTAX Cpqn52nnQuadIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each Port. The indices into the table are cpqn52nnQuadIfIndex." INDEX { cpqn52nnQuadIfIndex } ::= { cpqn52nnQuadIfTable 1 } Cpqn52nnQuadIfEntry ::= SEQUENCE { cpqn52nnQuadIfIndex INTEGER, cpqn52nnQuadIfAlignFcsErrors Counter, cpqn52nnQuadIfTxRunts Counter, cpqn52nnQuadIfRxRunts Counter, cpqn52nnQuadIfTotalCollisions Counter } cpqn52nnQuadIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index representing the interface as in MIN-II." ::= { cpqn52nnQuadIfEntry 1 } cpqn52nnQuadIfAlignFcsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets received between 64 and 1518 bytes in length, but were not an integral number of bytes in length, or had a bad Frame Check Sequence." ::= { cpqn52nnQuadIfEntry 2 } cpqn52nnQuadIfTxRunts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets transmitted that were less than 64 bytes in length." ::= { cpqn52nnQuadIfEntry 3 } cpqn52nnQuadIfRxRunts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets received that were less than 64 bytes long that were an integral number of bytes long." ::= { cpqn52nnQuadIfEntry 4 } cpqn52nnQuadIfTotalCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of collision packets, single and multiple." ::= { cpqn52nnQuadIfEntry 5 } -- -- The cpqn52nnQuadCascadeInfo Group: This group allows the user to get -- information about configuration and statistics for ports on the -- Quad-Cascades. -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnQuadIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnQuadIfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides information, on a per port basis, for the Quad Cascade devices." ::= { cpqn52nnQuadCascade 2 } cpqn52nnQuadIfCfgEntry OBJECT-TYPE SYNTAX Cpqn52nnQuadIfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each Port. The index into the table is cpqn52nnQuadIfIndex." INDEX { cpqn52nnQuadIfCfgIndex, cpqn52nnQuadIfCfgMauIndex } ::= { cpqn52nnQuadIfCfgTable 1 } Cpqn52nnQuadIfCfgEntry ::= SEQUENCE { cpqn52nnQuadIfCfgIndex INTEGER, cpqn52nnQuadIfCfgMauIndex INTEGER, cpqn52nnQuadIfCfgLinkForce INTEGER, cpqn52nnQuadIfCfgLinkPolarityCorrect INTEGER } cpqn52nnQuadIfCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index representing the interface as in MIN-II." ::= { cpqn52nnQuadIfCfgEntry 1 } cpqn52nnQuadIfCfgMauIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { cpqn52nnQuadIfCfgEntry 2 } cpqn52nnQuadIfCfgLinkForce OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- Enabled Link Test for this port. disabled(2) -- Disable Link Test for this port. } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: When enabled, this object allows the port to transmit even if link integrity fails." ::= { cpqn52nnQuadIfCfgEntry 3 } cpqn52nnQuadIfCfgLinkPolarityCorrect OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- Enabled Link Polarity Correction for this port. disabled(2) -- Disable Link Polarity Correction for this port. } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: When enabled, this allows the port to correct for inverted polarity on the twisted pair interface, if an inverted polarity condition exists on that port." ::= { cpqn52nnQuadIfCfgEntry 4 } -- -- The cpqn52nnTlanPortIfTable: This table allows the user to get -- information about configuration and statistics for ports on the -- Tlan. -- -- The 5226 first release version will not support this group. -- This group is not applicable to the 5226A. -- cpqn52nnTlanIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnTlanIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides information, on a per port basis, for the Tlan devices." ::= { cpqn52nnTlan 1 } cpqn52nnTlanIfEntry OBJECT-TYPE SYNTAX Cpqn52nnTlanIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each Port. The index into the table is cpqn52nnTlanIfIndex." INDEX { cpqn52nnTlanIfIndex } ::= { cpqn52nnTlanIfTable 1 } Cpqn52nnTlanIfEntry ::= SEQUENCE { cpqn52nnTlanIfIndex INTEGER, cpqn52nnTlanIfTxGoodFrms Counter, cpqn52nnTlanIfRxUndersizeFrms Counter, cpqn52nnTlanIfRxOverruns Counter, cpqn52nnTlanIfRxAlignSymbolErrs Counter } cpqn52nnTlanIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A simple index representing the Port in the table representing the IfIndex in MIB-II." ::= { cpqn52nnTlanIfEntry 1 } cpqn52nnTlanIfTxGoodFrms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets transmitted that were good (no errors)." ::= { cpqn52nnTlanIfEntry 2 } cpqn52nnTlanIfRxUndersizeFrms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets that were " ::= { cpqn52nnTlanIfEntry 3 } cpqn52nnTlanIfRxOverruns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets received that were " ::= { cpqn52nnTlanIfEntry 4 } cpqn52nnTlanIfRxAlignSymbolErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Shows the number of packets received that had either Alignment errors or Symbol errors." ::= { cpqn52nnTlanIfEntry 5 } -- -- The cpqn52nnHashMemory Group: This group consists of a subset of objects which -- allow the user to control how much memory is allocated to the individual -- RMON group implementations (4 group RMON). -- -- The 5226 and 5226A first release version will not support this group. -- cpqn52nnHashStaticNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of static entries in this switch interface's Address Forwarding/Filtering mechanism." ::= { cpqn52nnHashMemory 1 } cpqn52nnHashDynamicNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of dynamic entries in this switch interface's Address Forwarding/Filtering mechanism." ::= { cpqn52nnHashMemory 2 } cpqn52nnHashChainNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of indices in the Address Filter/Forward mechanism's hash table which have more than one MAC Address entry." ::= { cpqn52nnHashMemory 3 } cpqn52nnHashChainLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of MAC Address entries in the longest chain in the Address Filter/Forward mechanism's hash table." ::= { cpqn52nnHashMemory 4 } -- -- The cpqn52nnDropPkts Group: This group allows the user to get information -- about Dropped Packets in the system. The memory is divided into different -- regions for packet reception and transmission and this groups of objects -- is desgined to examine all of them. The following areas are examined: -- -- 1. Whole Memory. -- 2. Broadcast Packet Memory. -- 3. Individual Port TX/RX Memory. -- -- NOTE: The information provided indicates which ports have experienced -- dropped packets and a total number of packets dropped. However, the -- number does not allow a port by port distinction of packets dropped. -- -- -- The 5226 first release version will not support this group. -- The 5226A will not support this group. -- cpqn52nnDropsWholeMemoryCtr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter to indicate the total number of packets dropped due to memory overflow. This is exclusive of the other counters in this section." ::= { cpqn52nnDropPkts 1 } cpqn52nnDropsBcastMemoryCtr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter to indicate the total number of packets dropped due to memory overflow in the area handling Broadcast packets only. This is exclusive of the other counters in this section." ::= { cpqn52nnDropPkts 2 } cpqn52nnDropsIfMemoryCtr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter to indicate the total number of packets dropped due to memory overflow in the area handling interface TX/RX packets only. This is exclusive of the other counters in this section." ::= { cpqn52nnDropPkts 3 } -- -- The cpqn52nnBusMonTable Group: This table allows users to get and set -- Thresholding information about on either the packet buffer memory or -- the MAC controller bus. -- -- NOTE: THIS TABLE IS NOT BEING IMPLEMENTED IN THE FIRST RELEASE OF THE -- PRODUCT. THE MAXIMUM NUMBER OF ENTRIES IS 2. -- -- The 5226 and 5226A version will not support this group. -- cpqn52nnBusMonTable OBJECT-TYPE SYNTAX SEQUENCE OF Cpqn52nnBusMonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the unit's utilization information." ::= { cpqn52nnBusMonitorInfo 1 } cpqn52nnBusMonEntry OBJECT-TYPE SYNTAX Cpqn52nnBusMonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table has one entry for each bus component. The index into the table is cpqn52nnBusMonIndex." INDEX { cpqn52nnBusMonIndex } ::= { cpqn52nnBusMonTable 1 } Cpqn52nnBusMonEntry ::= SEQUENCE { cpqn52nnBusMonIndex INTEGER, cpqn52nnBusMonRowStatus CpqnRowStatus, cpqn52nnBusMonBusType INTEGER, cpqn52nnBusMonDataType INTEGER, cpqn52nnBusMonPktType INTEGER, cpqn52nnBusMonSwitchModeType INTEGER, cpqn52nnBusMonCurrentUtilization INTEGER, cpqn52nnBusMonPeakUtilization INTEGER, cpqn52nnBusMonRisingThreshold INTEGER, cpqn52nnBusMonFallingThreshold INTEGER, cpqn52nnBusMonAction INTEGER, cpqn52nnBusMonTrapEnable INTEGER } cpqn52nnBusMonIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A simple index representing the entry in the table." ::= { cpqn52nnBusMonEntry 1 } cpqn52nnBusMonRowStatus OBJECT-TYPE SYNTAX CpqnRowStatus ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The status of this alarm entry." ::= { cpqn52nnBusMonEntry 2 } cpqn52nnBusMonBusType OBJECT-TYPE SYNTAX INTEGER { mac-bus(1), -- MAC controller Bus (HSB) mem-bus(2) -- Packet Memory Bus } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The type of bus to be monitored." ::= { cpqn52nnBusMonEntry 3 } cpqn52nnBusMonDataType OBJECT-TYPE SYNTAX INTEGER { tx-only(1), -- Monitor TX data from selected ports. rx-only(2), -- Monitor RX data from selected ports. both-tx-and-rx(3) -- Monitor TX & RX data from selected ports. } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The type of data to be monitored." ::= { cpqn52nnBusMonEntry 4 } cpqn52nnBusMonPktType OBJECT-TYPE SYNTAX INTEGER { pkt-data-only(1), -- Monitor packet data only pkt-overhead-only(2), -- Monitor packet overhead only both-data-and-overhead(3) -- Monitor packet data and overhead } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The type of data to be monitored." ::= { cpqn52nnBusMonEntry 5 } cpqn52nnBusMonSwitchModeType OBJECT-TYPE SYNTAX INTEGER { store-and-forward-only(1), -- monitor store and forward packets only cut-through-only(2), -- monitor cut through packets only both-switch-modes(3) -- Monitor packets in both modes } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The type of packets monitored for data." ::= { cpqn52nnBusMonEntry 6 } cpqn52nnBusMonCurrentUtilization OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus." ::= { cpqn52nnBusMonEntry 7 } cpqn52nnBusMonPeakUtilization OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus." ::= { cpqn52nnBusMonEntry 8 } cpqn52nnBusMonRisingThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation." ::= { cpqn52nnBusMonEntry 9 } cpqn52nnBusMonFallingThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation." ::= { cpqn52nnBusMonEntry 10 } cpqn52nnBusMonAction OBJECT-TYPE SYNTAX INTEGER { filter(1), -- Filter all packets causing threshold to be exceeded backpressure(2), -- Exert backpressure to prevent excess filter-broadcast(3) -- Filter only the Broadcast packets } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is an absolute number in bytes/sec." ::= { cpqn52nnBusMonEntry 11 } cpqn52nnBusMonTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Enable Trap Generation if threshold is exceeded." ::= { cpqn52nnBusMonEntry 12 } -- PROPRIETARY TRAPS -- -- The 5226 first release version will not these traps. -- The 5226 version will not support 1-3. -- The 5226A will support trap 1. -- cpqn52nnPowerSupplyStatusTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnPsIndex, cpqn52nnPsStatus } DESCRIPTION "A cpqn52nnPowerSupplyStatus Trap is sent whenever a power supply changes state from voltage-ok to voltage-not-ok or vice versa." --#TYPE "PowerSupplyStatusTrap" --#SUMMARY "PowerSupplyStatusTrap" --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 ::= 1 cpqn52nnUplinkInsertedTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { ifIndex, cpqn52nnPortType } DESCRIPTION "The cpqn52nnMepInserted trap is sent whenever a MEP, that represents a physical interface, is added." --#TYPE "UplinkInserted" --#SUMMARY "UplinkInserted" --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 ::= 2 cpqn52nnUplinkRemovedTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { ifIndex, cpqn52nnPortType } DESCRIPTION "The cpqn52nnMepRemoved trap is sent whenever a MEP, that represents a physical interface, is removed." --#TYPE "UplinkRemoved" --#SUMMARY "UplinkRemoved" --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 ::= 3 cpqn52nnBusMonRisingThresholdTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnBusMonIndex, cpqn52nnBusMonBusType, cpqn52nnBusMonCurrentUtilization } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps." --#TYPE "BusMonRisongThresholdTrap" --#SUMMARY "BusMonRisingThresholdTrap" --#ARGUMENTS {3} --#SEVERITY MAJOR --#TIMEINDEX 99 ::= 4 cpqn52nnBusMonFallingThresholdTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnBusMonIndex, cpqn52nnBusMonBusType, cpqn52nnBusMonCurrentUtilization } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps." --#TYPE "BusMonFallingThresholdTrap" --#SUMMARY "BusMonFallingThresholdTrap" --#ARGUMENTS {3} --#SEVERITY MAJOR --#TIMEINDEX 99 ::= 5 --cpqb52nnAgentCongestionTrap TRAP-TYPE -- ENTERPRISE cpqn52nn -- VARIABLES { cpqn52nnCongestionStatus } -- DESCRIPTION -- "The SNMP trap that is generated when the management -- agent detects a congestion state." -- ::= 6 cpqb52nnGlobalBcastMemCongestionTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnBcastCongestionStatus } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps." --#TYPE "GlobalBcastMemCongestionTrap" --#SUMMARY "GlobalBcastMemCongestionTrap" --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 ::= 7 cpqb52nnPortTxPktCongestionTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnPortThreshIfIndex, cpqn52nnPortTxPktCongestionStatus } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps." --#TYPE "PortTxPktCongestionTrap" --#SUMMARY "PortTxxPktCongestionTrap" --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 ::= 8 cpqb52nnPortRxMemCongestionTrap TRAP-TYPE ENTERPRISE cpqn52nn VARIABLES { cpqn52nnPortThreshIfIndex, cpqn52nnPortRxMemCongestionStatus } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps." --#TYPE "PortRxMemCongestionTrap" --#SUMMARY "PortRxMemCongestionTrap" --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 ::= 9 END