-- **************************************************************************** -- -- Compaq StorageWorks Command Console -- Management Information Base for SNMP Network Management -- -- -- Copyright 1998 Compaq Computer Corporation. -- All Rights Reserved. -- -- The information in this document is subject to change without notice. -- -- COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL -- OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL -- OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, -- OR USE OF THIS MATERIAL. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQSWCC-MIB DEFINITIONS ::= BEGIN IMPORTS compaq FROM CPQHOST-MIB enterprises FROM RFC1155-SMI Counter FROM RFC1155-SMI Gauge FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 sysName FROM RFC1213-MIB cpqHoTrapFlags FROM CPQHOST-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqSwcc OBJECT IDENTIFIER ::= { compaq 132 } cpqSwccMibRev OBJECT IDENTIFIER ::= { cpqSwcc 1 } cpqSwccFibre OBJECT IDENTIFIER ::= { cpqSwcc 2 } cpqSwccEmuDev OBJECT IDENTIFIER ::= { cpqSwcc 3 } cpqSwccKzpcc OBJECT IDENTIFIER ::= { cpqSwcc 4 } -- **************************************************************************** -- -- SWCC MIB Revision -- ================= -- -- Compaq enterprise (1.3.6.1.4.1.232) -- cpqSwcc (1.3.6.1.4.1.232.132) -- cpqSwccMibRev (1.3.6.1.4.1.232.132.1) -- -- -- An SWCC Agent conforming to this document will return a -- cpqSwccMibRevMajor of one (1) and a cpqSwccMibRevMinor of one (1). -- -- **************************************************************************** cpqSwccMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqSwccMibRev 1 } cpqSwccMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred." ::= { cpqSwccMibRev 2 } cpqSwccMibCondition OBJECT-TYPE SYNTAX INTEGER { other (1), ok (2), degraded (3), failed (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the Compaq SWCC system represented by this MIB." ::= { cpqSwccMibRev 3 } -- **************************************************************************** -- -- SWCC FibreChannel Group -- ======================= -- -- Compaq (1.3.6.1.4.1.232) -- cpqSwcc (1.3.6.1.4.1.232.132) -- cpqSwccFibre (1.3.6.1.4.1.232.132.2) -- -- -- This group contains variables related to SWCC fibrechannel support. -- -- **************************************************************************** cpqSwccFibreDevName OBJECT-TYPE SYNTAX DisplayString( SIZE(0..64) ) ACCESS read-only STATUS mandatory DESCRIPTION "FibreChannel Device Name. The user-assigned name of a specific FC device." ::= { cpqSwccFibre 1 } cpqSwccFibreDevState OBJECT-TYPE SYNTAX INTEGER { other (1), ok (2), degraded (3), failed (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of a fibrechannel device." ::= { cpqSwccFibre 2 } cpqSwccFibreEventDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..128) ) ACCESS read-only STATUS mandatory DESCRIPTION "The description of a FibreChannel Device event." ::= { cpqSwccFibre 3 } -- ************************************************************************** -- -- SWCC FibreChannel Trap Definitions -- ================================== -- -- ************************************************************************** cpqSwccFibreDeviceStatusChange TRAP-TYPE ENTERPRISE cpqSwccFibre VARIABLES { sysName, cpqSwccFibreDevName, cpqSwccFibreDevState, cpqSwccFibreEventDescription } DESCRIPTION "FibreChannel Device Status Change. The SWCC Agent has detected a change in state on one of the managed FibreChannel devices. Variables: sysName The name of the host running the agent. cpqSwccFibreDevName The name of the device which has changed state. cpqSwccFibreDevState The current state of the device. cpqSwccFibreEventDescription A textual description of the reason for the trap." --#TYPE "FibreChannel Device Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {2} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 1 cpqSwccTapeControllerStatusChange TRAP-TYPE ENTERPRISE cpqSwccFibre VARIABLES { sysName, cpqSwccFibreDevName, cpqSwccFibreDevState, cpqSwccFibreEventDescription } DESCRIPTION "FibreChannel Device Status Change. The SWCC Agent has detected a change in state on one of the managed FibreChannel Tape Controller devices. Variables: sysName The name of the host running the agent. cpqSwccFibreDevName The name of the device which has changed state. cpqSwccFibreDevState The current state of the device. cpqSwccFibreEventDescription A textual description of the reason for the trap." --#TYPE "FibreChannel Device Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {2} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 2 -- **************************************************************************** -- -- SWCC Emu/Device Group -- ======================= -- -- Compaq (1.3.6.1.4.1.232) -- cpqSwcc (1.3.6.1.4.1.232.132) -- cpqSwccEmuDev (1.3.6.1.4.1.232.132.3) -- -- -- This group contains variables related to SWCC EMU and DeviceManager support. -- -- **************************************************************************** cpqSwccEmuDevDevName OBJECT-TYPE SYNTAX DisplayString( SIZE(0..64) ) ACCESS read-only STATUS mandatory DESCRIPTION "Device Name. The user-assigned name of a specific managed device." ::= { cpqSwccEmuDev 1 } cpqSwccEmuDevDevState OBJECT-TYPE SYNTAX INTEGER { other (1), ok (2), degraded (3), failed (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the managed device." ::= { cpqSwccEmuDev 2 } cpqSwccEmuDevEventDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..128) ) ACCESS read-only STATUS mandatory DESCRIPTION "A description of the event." ::= { cpqSwccEmuDev 3 } -- ************************************************************************** -- -- SWCC Emu/Dev Trap Definitions -- ============================= -- -- ************************************************************************** cpqSwccEmuDevDeviceStatusChange TRAP-TYPE ENTERPRISE cpqSwccEmuDev VARIABLES { sysName, cpqSwccEmuDevDevName, cpqSwccEmuDevDevState, cpqSwccEmuDevEventDescription } DESCRIPTION "EMU/Device Manager Device Status Change. The SWCC Agent has detected a change in state on one of the managed devices. Variables: sysName The name of the host running the agent. cpqSwccEmuDevDevName The name of the device which has changed state. cpqSwccEmuDevDevState The current state of the device. cpqSwccEmuDevEventDescription A textual description of the reason for the trap." --#TYPE "EMU/Device Manager Device Status Change" --#SUMMARY "Status is now %d." --#ARGUMENTS {2} --#SEVERITY CRITICAL --#TIMEINDEX 99 ::= 1 -- **************************************************************************** -- -- SWCC KZPCC -- ========== -- -- Compaq (1.3.6.1.4.1.232) -- cpqSwcc (1.3.6.1.4.1.232.132) -- cpqSwccKzpcc (1.3.6.1.4.1.232.132.4) -- -- -- The variables under this branch are to support the Kzpcc Agent -- -- **************************************************************************** -- -- Branch which will contain the variables sent in SNMP traps for the Kzpcc Agent. This -- branch will also be the trap authority for the SNMP traps for the Kzpcc Agent. -- cpqSwccKzpccTrap OBJECT IDENTIFIER ::= { cpqSwccKzpcc 1 } -- -- Variables defined for traps -- cpqSwccKzpccSytemName OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable which contains name of system the trap was generated from. The value of the variable will always be a printable ASCII string." ::= { cpqSwccKzpccTrap 1 } cpqSwccKzpccSubsytemName OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable which contains name of subsystem (controller) the trap has been generated for. The value of the variable will always be a printable ASCII string." ::= { cpqSwccKzpccTrap 2 } cpqSwccKzpccEventSeverity OBJECT-TYPE SYNTAX INTEGER { informational (1), warning (2), error (3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable whose enum value identifies the severity of the event which has occurred." ::= { cpqSwccKzpccTrap 3 } cpqSwccKzpccEventDescription OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable which contains description of event which caused trap to be sent. The value of the variable will also be a printable ASCII string." ::= { cpqSwccKzpccTrap 4 } -- **************************************************************************** -- -- SWCC KZPCC Trap Definitions -- =========================== -- -- ************************************************************************** -- -- SWCC KZPCC traps for physical device events -- cpqSwccKzpccPhyDeviceEventTrap TRAP-TYPE ENTERPRISE cpqSwccKzpccTrap VARIABLES { cpqSwccKzpccSystemName, cpqSwccKzpccSubsystemName, cpqSwccKzpccEventSeverity, cpqSwccKzpccEventDescription } DESCRIPTION "Some event has happened to a physical device on a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred." ::= 1 -- -- SWCC KZPCC traps for virtual devices -- cpqSwccKzpccVirtualDeviceEventTrap TRAP-TYPE ENTERPRISE cpqSwccKzpccTrap VARIABLES { cpqSwccKzpccSystemName, cpqSwccKzpccSubsystemName, cpqSwccKzpccEventSeverity, cpqSwccKzpccEventDescription } DESCRIPTION "Some event has happened to a virtual device (logical drive) on a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred." ::= 2 -- -- SWCC KZPCC traps for subsystem events -- cpqSwccKzpccSubsystemEventTrap TRAP-TYPE ENTERPRISE cpqSwccKzpccTrap VARIABLES { cpqSwccKzpccSystemName, cpqSwccKzpccSubsystemName, cpqSwccKzpccEventSeverity, cpqSwccKzpccEventDescription } DESCRIPTION "Some event has happened to a KZPCC controller that a user maybe interested in knowing. The following variables are included in the trap to provide information to the user: Variables: cpqSwccKzpccSystemName - an octet string which will contain ASCII string identifying the name of the system the trap was generated from. cpqSwccKzpccSubsystemName - an octet string which will contain ASCII string identifying the name of the KZPCC controller (as defined by the system) the event occurred on. cpqSwccKzpccEventSeverity - an enumerated integer that identifies the severity level of the event. cpqSwccKzpccEventDescription - an octet string which will contain an ASCII string describing the event that has occurred." ::= 3 END