-- -- Managed objects and events for the Compaq WL400 HAP -- -- These objects complement the IEEE 802.11 MIB -- (iso(1).member-body(2).us(840).ieee802dot11(10036)) -- -- Copyright(c) 1997,1998,1999 No Wires Needed BV -- -- Version 2.0.0 -- WL400-DOT11EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, BITS, NOTIFICATION-TYPE FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF wl400Products, wl400Modules FROM WL400-GLOBAL-REG; dot11ExtMibModule MODULE-IDENTITY LAST-UPDATED "9906020000Z" ORGANIZATION "Compaq Computer Corporation" CONTACT-INFO " Name: Compaq Computer Corporation Address: 20555 SH 249 Zip: 77070 City: Houston Country: USA Phone: Fax: e-mail: " DESCRIPTION "The 802.11 Extension MIB module." ::= { wl400Modules 2 } -- root for items in the 802.11 Extension MIB Module dot11ExtMIB OBJECT IDENTIFIER ::= { wl400Products 1 } -- conformance and compliance specifications dot11ExtConf OBJECT IDENTIFIER ::= { dot11ExtMIB 1 } dot11ExtGroups OBJECT IDENTIFIER ::= { dot11ExtConf 1 } dot11ExtCompl OBJECT IDENTIFIER ::= { dot11ExtConf 2 } -- subtree for general 802.11 objects dot11ExtGenObjs OBJECT IDENTIFIER ::= { dot11ExtMIB 2 } smt OBJECT IDENTIFIER ::= { dot11ExtGenObjs 1 } -- additional objects with product specifics (the Parrot) dot11ExtAPObjs OBJECT IDENTIFIER ::= { dot11ExtMIB 3 } assoc OBJECT IDENTIFIER ::= { dot11ExtAPObjs 1 } security OBJECT IDENTIFIER ::= { dot11ExtAPObjs 2 } -- WBU object specifics dot11ExtWBUObjs OBJECT IDENTIFIER ::= { dot11ExtMIB 5 } roam OBJECT IDENTIFIER ::= { dot11ExtWBUObjs 1 } -- subtree for events and notifications dot11ExtEvents OBJECT IDENTIFIER ::= { dot11ExtMIB 4 } dot11ExtEventsV2 OBJECT IDENTIFIER ::= { dot11ExtEvents 0 } -- -- The SMT group, enhancing the IEEE 802.11 MIB -- smtAssociationID OBJECT-TYPE SYNTAX Integer32 (0..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "The Association ID of an association between an Access Point and a Station. The size constraint is taken from IEEE 802.11 section 7.3.1.8. For an Access Point, this object is always zero." REFERENCE "IEEE 802.11, paragraph 7.3.1.8" ::= { smt 1 } smtCapabilityInfo OBJECT-TYPE SYNTAX BITS { privacy(0), cfPollRequest(1), cfPollable(2), ibss(3), ess(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Capability Information of this entity." REFERENCE "IEEE 802.11, paragraph 7.3.1.4" ::= { smt 2 } smtPowerSaveInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time limit, in units of beacon intervals, after which the Client will go into Power Save Mode if the Client does not detect activity. For an Access Point, this object is always zero." ::= { smt 3 } smtListenInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time, in units of beacon intervals, that may pass before the Client awakens and listens for the next Beacon. For an Access Point, this object is always zero." REFERENCE "IEEE 802.11, paragraph 10.3.6.1 and 11.3" ::= { smt 4 } smtATIMWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The duration of the ATIM Window, in TUs. For an Access Point, this object is always zero." REFERENCE "IEEE 802.11, paragraph 11.2.2" ::= { smt 5 } smtOperationalChannels OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The list of DS channels that shall be scanned with a higher priority. All channels allowed by the current regulatory domain are scanned, the channels specified in this object are visited more frequently compared to the channels not in the set of this object. If the object is null, the PHY will default to the channel configured by dot11CurrentChannel." REFERENCE "IEEE 802.11, paragraph 10.3.2.1" ::= { smt 6 } smtCurrentBSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The current Basic Service Set ID. For a Client, this object either contains the BSSID of the Access Point with which the Client is associated or the BSSID of the IBSS it is currently participating in (smtCurrentBSSType indicates which of the two cases holds). If the object is all zeros, the Client is not associated or participating in an IBSS. For an Access Point, this object contains the BSSID of the Access Point. If the Access Point is in the process of resetting, the object is all zeros." REFERENCE "IEEE 802.11, paragraph 7.1.3.3.3" ::= { smt 7 } smtCurrentSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The current Service Set ID. For a Client, this object either contains the SSID of the infrastructure network or the SSID of the IBSS it currently associated with or participating in. For an Access Point, this object contains the BSSID of the Access Point. If the Access Point is resetting, the object is null." REFERENCE "IEEE 802.11, paragraph 7.3.2.1" ::= { smt 8 } smtCurrentBSSType OBJECT-TYPE SYNTAX INTEGER { infrastructure(1), adhoc(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the Basic Service Set. For a Client, this object indicates the type of SS it currently is associated with, participating in. For an Access Point, this object is 1 (infrastructure)." REFERENCE "IEEE 802.11, paragraph 5.2" ::= { smt 9 } smtPublicKeyEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether public-key techniques shall be used to negotiate keys." ::= { smt 10 } smtQualityLevel0 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object relates quality level to a transmission rate. Level 0 specifies the lowest (basic) rate." ::= { smt 11 } smtQualityLevel1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object relates quality level to a transmission rate. Level 1 specifies the second lowest (basic) rate." ::= { smt 12 } smtQualityLevel2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object relates quality level to a transmission rate. Level 2 specifies the an arbitrary (higher) rate." ::= { smt 13 } smtQualityPenalty OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a quality penalty for transmission failures." ::= { smt 14 } smtStationDBTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a timeout on entries and their state information in the Station database. For Clients the Station database is mapped on the roamTable. For Access Points, the Station database is mapped on the assocTable. The timeout is in seconds." ::= { smt 15 } smtQualityIndicator OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This object selects the quality indicator from the baseband. Current quality indicators are: 1 = Signal Quality 1 (SQ1) 2 = Signal Quality 2 (SQ2) 3 = Signal Quality 3 (SQ3)" ::= { smt 16 } smtQualityUpperLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "An upper limit for the quality." ::= { smt 17 } smtQualityLowerLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A lower limit for the quality." ::= { smt 18 } smtOEMCapabilityInformation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OEM Capability Information." ::= { smt 19 } smtCWMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The CWMin value as defined by IEEE 802.11. Needs to be a power of 2, minus 1." ::= { smt 20 } smtCWMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The CWMax value as defined by IEEE 802.11. Needs to be a power of 2, minus 1, larger than or equal to smtCWMin." ::= { smt 21 } smtACKWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACK frame time out defined in number of slottimes. This can be used to optimize long range links." ::= { smt 22 } -- -- Objects that are specific to the Parrot Access Point -- assocTableMaxLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maximum number of associations the assocTable can hold." ::= { assoc 1 } assocTable OBJECT-TYPE SYNTAX SEQUENCE OF AssocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Association table. This table contains all the Clients associated with the Access Point. The index of the entry equals the Association ID of the Client with the Access Point. An entry in the table is only valid if the assocAddress object of that entry contains a MAC address other then the all zeros MAC address. Refer to sections 5.7 and 11.3 of the 802.11 standard for more information on associations. The table is read-only." ::= { assoc 2 } assocEntry OBJECT-TYPE SYNTAX AssocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Association Table." INDEX { assocIndex } ::= { assocTable 1 } AssocEntry ::= SEQUENCE { assocIndex Integer32, assocAddress MacAddress, assocQuality Integer32, assocAge Integer32, assocRSSI Integer32 } assocIndex OBJECT-TYPE SYNTAX Integer32 (1..2007) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the association table. The index equals the association ID that is in use for the Client." ::= { assocEntry 1 } assocAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of a Client associated with the Access Point. If the association is pending (that is, the Client is scanning, authenticating or associating), assocAddress contains the MAC address of that Client with the group bit set to indicate that the Access Point is aware of the presence of that Client. The other objects of the entry will be updated based on the information extracted from the received Probe Requests." ::= { assocEntry 2 } assocQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator for the quality of the Client. If the association is still pending, the quality is calculated over the received Probe Requests from the Client. If the Client is associated, the quality derived from any activity with the Client. The actual quality source depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'." ::= { assocEntry 3 } assocAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator (in seconds) for the age of the information on the Client. The age is reset to 0 if any activity of this Client is detected." ::= { assocEntry 4 } assocRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator for the RSSI of the Client. If the association is still pending, the RSSI is calculated over the received Probe Requests from the Client. If the Client is associated, the RSSI derived from any activity with the Client." ::= { assocEntry 5 } -- -- Security group for the Parrot 550 -- secMACAclMaxTableLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries that the secMACAclTable can contain." ::= { security 1 } secMACAclTable OBJECT-TYPE SYNTAX SEQUENCE OF SecMACAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing an access control list (acl) with MAC addresses of 802.11 Clients and whether they are allowed to communicate with the wireless network through this Access Point. This table enforces a source address check. An address of FF-FF-FF-FF-FF-FF is used as a default entry, i.e., it determines the access control for Clients that are otherwise not listed in this table. When the table is empty, every Client is denied." ::= { security 2 } secMACAclEntry OBJECT-TYPE SYNTAX SecMACAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." INDEX { secMACAclIndex } ::= { secMACAclTable 1 } SecMACAclEntry ::= SEQUENCE { secMACAclIndex Integer32, secMACAclAddress MacAddress, secMACAclAllowed TruthValue, secMACAclRowStatus RowStatus } secMACAclIndex OBJECT-TYPE SYNTAX Integer32 (1..2007) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the secMACAclTable." REFERENCE "IEEE 802.11, paragraph 7.3.1.8" ::= { secMACAclEntry 1 } secMACAclAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address of a Client allowed to join the network through this Access Point. The address FF-FF-FF-FF-FF-FF constitutes the default behaviour for addresses not contained in this table." ::= { secMACAclEntry 2 } secMACAclAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag indicating whether the corresponding MAC address is allowed to communicate through this Access Point or not." ::= { secMACAclEntry 3 } secMACAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status value for creating and deleting rows in this table." ::= { secMACAclEntry 4 } secLastError OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "When a security violation or error occurs, the error code is written to this variable in the form of a string." ::= { security 3 } secLastErrorAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "When a security violation or error occurs, the MAC address involved in the violation or error is written to this variable." ::= { security 4 } -- -- Notifications -- securityViolation NOTIFICATION-TYPE OBJECTS { secLastError, secLastErrorAddress } STATUS current DESCRIPTION "A security violation was detected. The secLastErrorCode indicates the type of error/violation, the secLastErrorAddress indicates the involved MAC address." ::= { dot11ExtEventsV2 1 } -- -- Roaming group for the WBU -- roamScanType OBJECT-TYPE SYNTAX INTEGER { passive(0), active(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the type of scanning the Client uses." REFERENCE "IEEE 802.11, paragraph 11.1.3" ::= { roam 1 } roamScanInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval, in units of beacon intervals, between successive scans during an association." ::= { roam 2 } roamProbeDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the delay (in ms) to be used prior to transmitting a Probe frame during active scanning. The object implements the ProbeDelay parameter of the MLME-SCAN.request primitive as defined in section 10.3.2.1 of the 802.11 standard." REFERENCE "IEEE 802.11, paragraph 10.3.2.1" ::= { roam 3 } roamMinChannelTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the minimum time (in time units) to spend on each channel when scanning. The object implements the MinChannelTime parameter in the MLME-SCAN.request primitive as defined in section 10.3.2.1 of the 802.11 standard." REFERENCE "IEEE 802.11, paragraph 10.3.2.1" ::= { roam 4 } roamMaxChannelTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the maximum time (in time units) to spend on each channel when scanning. The object implements the MaxChannelTime parameter in the MLME-SCAN.request primitive as defined in section 10.3.2.1 of the 802.11 standard." REFERENCE "IEEE 802.11, paragraph 10.3.2.1" ::= { roam 5 } roamJoinTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The firmware will keep trying to find a suitable BSS until another MLME-JOIN.request is issued. The object roamJoinTimeout allows the application to estimate how long it at least has to wait before it can assume that MLME-JOIN.request is likely to fail. The object should be considered for information purposes. Changing the object will have no effect. Future versions may use this object to limit the time it spends to try to join a specific Service Set." ::= { roam 6 } roamBeaconPeriodTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time limit, in units of beacon intervals, after which the association is voided if no beacons are received." ::= { roam 7 } roamDontSwitch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time limit, in units of beacon intervals, during which the Client will not use BSS quality parameters for making the roaming decissions if it becomes associated with an Access Point." ::= { roam 8 } roamBlackout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time, in units of beacon intervals, during which the BSS is not considered candidate after the association was denied or voided." ::= { roam 9 } roamDisassociateTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time, in units of beacon intervals, taken by the Disassociate procedure." REFERENCE "IEEE 802.11, paragraph 5.7.4" ::= { roam 10 } roamHandoffTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time, in time units, during which data to the Access Point is hold before a handoff is performed." ::= { roam 11 } roamWeightMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 12 } roamWeightMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 13 } roamWeightMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 14 } roamWeightMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 15 } roamWeightMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 16 } roamWeightMetric6 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 17 } roamWeightMetric7 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 18 } roamWeightMetric8 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A metric used to make roaming decisions." ::= { roam 19 } roamMisc1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A misc roaming value." ::= { roam 20 } roamMisc2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A misc roaming value." ::= { roam 21 } -- the roaming database roamTableLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maximum number of entries the roamTable can hold." ::= { roam 22 } roamTable OBJECT-TYPE SYNTAX SEQUENCE OF RoamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Roaming table contains all the BSSs the Client is aware of. An entry in the roamTable is only valid if the roamBSSID object of that entry contains a MAC address other then the all zeros MAC address. The table implements the BSSDescription table as defined in 10.3.2.2 of the 802.11 standard. This table is read-only." REFERENCE "IEEE 802.11, paragraph 5.2 and 10.3.2.2" ::= { roam 23 } roamEntry OBJECT-TYPE SYNTAX RoamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Roaming table." INDEX { roamIndex } ::= { roamTable 1 } RoamEntry ::= SEQUENCE { roamIndex Integer32, roamBSSID MacAddress, roamSSID OCTET STRING, roamBSSType INTEGER, roamChannel Integer32, roamAge Integer32, roamQuality Integer32, roamLoad Integer32, roamBeaconPeriod Integer32, roamDTIMPeriod Integer32, roamCapabilityInfo BITS, roamRates OCTET STRING, roamRSSI Integer32 } roamIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the table" ::= { roamEntry 1 } roamBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BSSID of the BSS. If this entry in the roamTable is not used, the roamBSSID is all zeros." REFERENCE "IEEE 802.11, paragraph 7.1.3.3.3" ::= { roamEntry 2 } roamSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Service Set ID the BSS is part of." REFERENCE "IEEE 802.11, paragraph 7.3.2.1" ::= { roamEntry 3 } roamBSSType OBJECT-TYPE SYNTAX INTEGER { infrastructure(1), independent(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The BSS Type of the entry." REFERENCE "IEEE 802.11, paragraph 5.2" ::= { roamEntry 4 } roamChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The DS channel the BSS is using." ::= { roamEntry 5 } roamAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator (in seconds) for the age of the information on the BSS. The age is reset to 0 if a Beacon of this BSS is received." ::= { roamEntry 6 } roamQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator for the quality of the BSS. The quality is calculated over the received Beacons of the BSS and depends on the selected quality indicator. The semantics of the indicator is 'low is good quality' and 'high is bad quality'." ::= { roamEntry 7 } roamLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator for the load of the BSS." ::= { roamEntry 8 } roamBeaconPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The beacon period (in time units) of this BSS." REFERENCE "IEEE 802.11, paragraph 11.1.2.1" ::= { roamEntry 9 } roamDTIMPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The DTIM period of this BSS." REFERENCE "IEEE 802.11, paragraph 11.2" ::= { roamEntry 10 } roamCapabilityInfo OBJECT-TYPE SYNTAX BITS { privacy(0), cfPollRequest(1), cfPollable(2), ibss(3), ess(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Capability Information for this BSS." REFERENCE "IEEE 802.11, paragraph 7.3.1.4" ::= { roamEntry 11 } roamRates OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The bit rates supported by the BSS. The least-significant 7 bits of each non-null octet value are a count from 00h -7Fh, corresponding to data rates in increments of 500Kbit/s. The most-significant bit of each non-null octet is set to one if the data rate represented by this octet is a member of the basic rate set and is set to zero if this data rate is optional. The list ends with a null octet." REFERENCE "IEEE 802.11, paragraph 10.3.2.2" ::= { roamEntry 12 } roamRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An indicator for the RSSI of the BSS. The RSSI is calculated over the received Beacons of the BSS." ::= { roamEntry 13 } -- -- Object and event groups -- smtGroup OBJECT-GROUP OBJECTS { smtAssociationID, smtCapabilityInfo, smtPowerSaveInterval, smtListenInterval, smtATIMWindow, smtOperationalChannels, smtCurrentBSSID, smtCurrentSSID, smtCurrentBSSType, smtPublicKeyEnable, smtQualityLevel0, smtQualityLevel1, smtQualityLevel2, smtQualityPenalty, smtStationDBTimeout, smtQualityIndicator, smtQualityUpperLimit, smtQualityLowerLimit, smtOEMCapabilityInformation, smtCWMin, smtCWMax, smtACKWindow } STATUS current DESCRIPTION "The additional objects for Station Management" ::= { dot11ExtGroups 1 } assocGroup OBJECT-GROUP OBJECTS { assocTableMaxLength, assocAddress, assocQuality, assocAge, assocRSSI } STATUS current DESCRIPTION "The association group" ::= { dot11ExtGroups 2 } securityGroup OBJECT-GROUP OBJECTS { secMACAclMaxTableLength, secMACAclAddress, secMACAclAllowed, secMACAclRowStatus, secLastError, secLastErrorAddress } STATUS current DESCRIPTION "The security group" ::= { dot11ExtGroups 3 } secNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { securityViolation } STATUS current DESCRIPTION "The security-related notifications." ::= { dot11ExtGroups 4 } roamGroup OBJECT-GROUP OBJECTS { roamScanType, roamScanInterval, roamBeaconPeriodTimeout, roamBlackout, roamDisassociateTime, roamHandoffTime, roamWeightMetric1, roamWeightMetric2, roamWeightMetric3, roamWeightMetric4, roamWeightMetric5, roamWeightMetric6, roamWeightMetric7, roamWeightMetric8, roamMisc1, roamMisc2, roamProbeDelay, roamDontSwitch, roamMinChannelTime, roamMaxChannelTime, roamJoinTimeout, roamTableLength, roamSSID, roamBSSID, roamBSSType, roamChannel, roamAge, roamQuality, roamLoad, roamBeaconPeriod, roamDTIMPeriod, roamCapabilityInfo, roamRates, roamRSSI } STATUS current DESCRIPTION "The roaming group" ::= { dot11ExtGroups 5 } -- -- Compliance specifications -- dot11ExtBasicCompl MODULE-COMPLIANCE STATUS current DESCRIPTION "The implementation requirements for an IEEE 802.11 Station." MODULE -- this module MANDATORY-GROUPS { smtGroup } ::= { dot11ExtCompl 1 } dot11ExtAPCompl MODULE-COMPLIANCE STATUS current DESCRIPTION "The implementation requirements for an Access Point." MODULE -- this module MANDATORY-GROUPS { smtGroup, assocGroup, securityGroup } -- Trap support is not required. ::= { dot11ExtCompl 2 } dot11ExtWBUCompl MODULE-COMPLIANCE STATUS current DESCRIPTION "The implementation requirements for a WBU." MODULE -- this module MANDATORY-GROUPS { roamGroup } ::= { dot11ExtCompl 3 } END