--
-- file: vossysmgr.mib
--
-- COMTEK Services, Inc. NM*SysMgr MIB for VOS (Stratus, IBM System 88)
-- Release      1.5.8
-- Date         Feb, 1997
-- Author       Steve Harris
--
-- Copyright 1997 COMTEK Services, Inc.  All Rights Reserved.
--
-- This COMTEK Services SNMP Management Information Base Specification
-- (Specification) embodies COMTEK Services' confidential and
-- proprietary intellectual property.  COMTEK Services retains all
-- title and ownership in the Specification, including any
-- revisions.
--
-- This Specification is supplied "AS IS," and COMTEK Services makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.


-- The operation of the NM*SysMgr agent for VOS is controlled via
-- the configuration file (snmpd.config), the community file (snmpd.comm),
-- the trap destination file (snmpd.trap_comm), and the user trap
-- destination file (snmpd.user_trap).  See the User's Guide for a
-- complete description of each of these files.


-- VOS times are put into time ticks.  CPU utilization statistics are
-- normalized by number of processors so they will fall in the range of
-- 0-100.


COMTEK-MIB DEFINITIONS ::= BEGIN

IMPORTS
     DisplayString                    FROM RFC1213-MIB
     OBJECT-TYPE, TimeTicks, Counter, enterprises
                                      FROM RFC1155-SMI
     comtek, comtekvosMib, comtekvosAgent
                                      FROM COMTEK-DEFINITIONS-MIB;

-- The following is used to identify versions of the VOS agent
comtekVosAgent OBJECT IDENTIFIER  ::= { comtekvosAgent 1 }

-- This group lists system resources available (OS, CPU, disk)
resources OBJECT IDENTIFIER       ::= { comtekvosMib 1 }

-- This group contains a table of VOS processes and statistics
processes OBJECT IDENTIFIER       ::= { comtekvosMib 2 }

-- This group contains a table of user trap data
userinfo OBJECT IDENTIFIER        ::= { comtekvosMib 3 }

vos  OBJECT IDENTIFIER      ::= { resources 1 }                
cpu  OBJECT IDENTIFIER      ::= { resources 2 }                
disk OBJECT IDENTIFIER      ::= { resources 3 }                

-- The VOS agent may be configured to process data for one, selected,
-- or all modules.  By default, the agent gathers data for all accessible 
-- modules.  To limit data gathering to the module on which the agent is 
-- run, specify "localModule=1" in the snmpd.config configuration file.  To 
-- select a subset of modules that the agent is to monitor, specify each
-- module to be monitored using the "monitor=<module name>" configuration
-- parameter.

vosNumModules OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of modules."
     ::= { vos 1 }

vosTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF VosTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A simplified version of what is read from
         s$get_module_usage()."
     ::= { vos 2 }

vosTableEntry  OBJECT-TYPE
     SYNTAX  VosTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A row in the module table."
     INDEX { vosModuleNumber }
     ::= { vosTable 1 }
                
VosTableEntry ::= SEQUENCE {
     vosModuleNumber   INTEGER,
     vosModuleName     DisplayString,
     vosVersion        DisplayString,
     vosCPUtype        DisplayString,
     vosNumCPUs        INTEGER,
     vosModPaging      INTEGER
 }

vosModuleNumber   OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Table index number assigned to this module."
     ::= { vosTableEntry 1 }

vosModuleName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of this module."
     ::= { vosTableEntry 2 }                

vosVersion OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..100))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The version numbers for this copy of VOS."
     ::= { vosTableEntry 3 }

vosCPUtype OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..100))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The type and model number of the CPU(s)."
     ::= { vosTableEntry 4 }

vosNumCPUs OBJECT-TYPE
     SYNTAX  INTEGER (1..32)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of CPU(s) currently running."
     ::= { vosTableEntry 5 }

vosModPaging OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of paging space used for module."
     ::= { vosTableEntry 6 }

-- The red light table is a circular buffer of hardware log messages from 
-- monitored modules.  This table is not organized by module, rather the 
-- messages are placed in the table in the order in which they arrive.  
-- This table is being implemented as a circular buffer to avoid the 
-- problem of the user who enables these messages and never cleans the 
-- table.  There is currently a limit of 100 log items in this table.

vosNumRedLights OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of entries in the red light table."
     ::= { vos 3 }

vosRedLightTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF VosRedLightTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A table of messages from the >system>hardware_log.*."
     ::= { vos 4 }

vosRedLightTableEntry  OBJECT-TYPE
     SYNTAX  VosRedLightTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A row in the red light table."
     INDEX { vosRedLightNumber }
     ::= { vosRedLightTable 1 }
                
VosRedLightTableEntry ::= SEQUENCE {
     vosRedLightNumber      INTEGER,
     vosRedLightModuleName  DisplayString,
     vosRedLightMessage     DisplayString
 }

vosRedLightNumber   OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Table index number assigned to this red light entry."
     ::= { vosRedLightTableEntry 1 }

vosRedLightModuleName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of module event occurred on."
     ::= { vosRedLightTableEntry 2 }                

vosRedLightMessage  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..112))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Message from hardware log."
     ::= { vosRedLightTableEntry 3 }                

vosConfigFileName OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..256))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Full path name of current configuration file used by agent.
         The agent always uses the file snmpd.config as its configuration
         file on startup.  Set requests on this variable have not been
         implemented.  To modify configuration file parameters, make
         the necessary changes to the snmpd.config file and stop and
         restart the agent."
     ::= { vos 5 }

vosInputQueueMessage  OBJECT-TYPE
     SYNTAX  OCTET STRING (SIZE (0..512))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Most recent remote console message sent by NMS to agent. 
         This MIB item is the method in which remote console
         commands are entered by the NMS.  Performing a set-request
         on this MIB variable creates a new remote console command.
         The agent places each new remote console command in the 
         Input Queue named below for processing by the NM*Console 
         process."
     ::= { vos 6 }                

vosInputQueueName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..256))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Input Queue name where the agent is to write remote
         console messages for processing by NM*Console.  This
         name is specified in the configuration file and must
         be identical to the name of the queue specified when
         starting the NM*Console process."
     ::= { vos 7 }                

vosTrapCommFileName OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..256))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Full path name of the current trap destination file being used 
         by the agent. The agent always starts up using the file 
         snmpd.trap_comm.  Set-requests on this file name cause the agent 
         to reinitialize its trap destinations using the data in the new 
         file name."
     ::= { vos 8 }

vosUserTrapCommFileName OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..256))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Full path name of the current user trap destination file being 
         used by the agent.  If the file snmpd.user_trap exists when 
         the agent starts up, user traps are routed using this file.  If 
         this file is not found when the agent starts up, the file 
         snmpd.trap_comm will be used to specify user trap destinations.  
         Set-requests on this file name cause the agent to reinitialize 
         its user trap destinations using the data in the new file name."
     ::= { vos 9 }

cpuModLoad      OBJECT IDENTIFIER     ::= { cpu 1 }
cpuModUsage     OBJECT IDENTIFIER     ::= { cpu 2 }

-- The cpuModLoadTable collects load statistics by module.

cpuModLoadTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF CpuModLoadEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "CPU load by module."
     ::= { cpuModLoad 1 }

cpuModLoadEntry  OBJECT-TYPE
     SYNTAX  CpuModLoadEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "CPU load table structure."
     INDEX { cpuModLoadIndex }
     ::= { cpuModLoadTable 1 }
                
CpuModLoadEntry ::= SEQUENCE {
     cpuModLoadIndex             INTEGER,
     cpuModLoadName              DisplayString,
     cpuModLoadOneMinute         INTEGER,
     cpuModLoadFiveMinute        INTEGER,
     cpuModLoadFifteenMinute     INTEGER,
     cpuModLoadIntsOneMinute     INTEGER,
     cpuModLoadIntsFiveMinute    INTEGER,
     cpuModLoadIntsFifteenMinute INTEGER,
     cpuModLoadPFsOneMinute      INTEGER,
     cpuModLoadPFsFiveMinute     INTEGER,
     cpuModLoadPFsFifteenMinute  INTEGER
 }

cpuModLoadIndex  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Location in table."
     ::= { cpuModLoadEntry 1 }                

cpuModLoadName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of module."
     ::= { cpuModLoadEntry 2 }                

cpuModLoadOneMinute  OBJECT-TYPE
     SYNTAX  TimeTicks
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "CPU seconds used in the previous minute by module."
     ::= { cpuModLoadEntry 3 }

cpuModLoadFiveMinute  OBJECT-TYPE
     SYNTAX  TimeTicks
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "CPU seconds used in previous five minutes by module."
     ::= { cpuModLoadEntry 4 }

cpuModLoadFifteenMinute  OBJECT-TYPE
     SYNTAX  TimeTicks
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "CPU seconds used in previous fifteen minutes by module."
     ::= { cpuModLoadEntry 5 }

cpuModLoadIntsOneMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of interrupts in one minute by module."
     ::= { cpuModLoadEntry 6 }

cpuModLoadIntsFiveMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of interrupts in five minutes by module."
     ::= { cpuModLoadEntry 7 }

cpuModLoadIntsFifteenMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of interrupts in fifteen minutes by module."
     ::= { cpuModLoadEntry 8 }

cpuModLoadPFsOneMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of page faults (user, system, and server) in one minute
         by module."
     ::= { cpuModLoadEntry 9 }

cpuModLoadPFsFiveMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of page faults (user, system and server) in five minutes
         by module."
     ::= { cpuModLoadEntry 10 }

cpuModLoadPFsFifteenMinute  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of page faults (user, system and server) in fifteen minutes
         by module."
     ::= { cpuModLoadEntry 11 }

-- The cpuModUsageTable shows the amount of CPU usage in percent.  This is
-- normalized by the number of processors so that the range is 0-100.  The 
-- data in this table can be used to generate traps whenever overall CPU 
-- usage or interrupt CPU usage reaches or exceeds user set thresholds.
-- The variables CpuUtil and IntUtil in the configuration file may be 
-- used to specify the threshold for excessive CPU usage traps 
-- (cpuUsageExcessive) and excessive CPU usage by interrupt traps 
-- (interruptCpuUsageExcessive), respectively.

cpuModUsageTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF CpuModUsageEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "CPU usage by module."
     ::= { cpuModUsage 1 }

cpuModUsageEntry  OBJECT-TYPE
        SYNTAX  CpuModUsageEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
            "CPU usage table structure."
        INDEX { cpuModUsageIndex }
        ::= { cpuModUsageTable 1 }
                
CpuModUsageEntry ::= SEQUENCE {
     cpuModUsageIndex      INTEGER,
     cpuModUsageName       DisplayString,
     cpuModUsageUser       INTEGER,
     cpuModUsageSystem     INTEGER,
     cpuModUsageInterrupts INTEGER,
     cpuModUsageServer     INTEGER,
     cpuModUsageIdle       INTEGER
 }

cpuModUsageIndex  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Location in table."
     ::= { cpuModUsageEntry 1 }                

cpuModUsageName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of module."
     ::= { cpuModUsageEntry 2 }                

cpuModUsageUser  OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of CPU utilized by user processes on this module 
         during the previous minute."
     ::= { cpuModUsageEntry 3 }

cpuModUsageSystem  OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of CPU utilized by system processes on this module
         during the previous minute."
     ::= { cpuModUsageEntry 4 }

cpuModUsageInterrupts  OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of CPU utilized by interrupts on this module during
         the previous minute."
     ::= { cpuModUsageEntry 5 }

cpuModUsageServer  OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of CPU utilized by network server processes on this
         module during the previous minute."
     ::= { cpuModUsageEntry 6 }

cpuModUsageIdle  OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of time the CPUs were idle while no processes were
          ready to run during the previous minute."
     ::= { cpuModUsageEntry 7 }

-- The disk system statistics are stored in a table, one row per disk. This
-- is for all monitored modules.  Traps are sent when disk utilization 
-- by the file partition or page partition reaches or exceeds limits set by
-- the agent configuration files.  The "diskSystemNumberEntries" should be
-- read first to avoid querying nonexistent rows in the table.  The 
-- configuration file variables DiskUse, MinFreeRecords, PageUse, and 
-- DiskAlarm are used to control trap message generation based on disk 
-- information. DiskUse specifies the file partition threshold at which 
-- diskFull traps are sent, MinFreeRecords specifies the threshold for
-- the diskNoFreeSpace trap, and PageUse specifies the paging file 
-- partition at which pageFull traps are sent.  The DiskAlarm parameter
-- specifies how frequently these trap messages should be repeated. 

diskSystemNumberEntries OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of entries in the disk system table."
     ::= { disk 1 }

diskSystemTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF DiskSystemEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "Table of disk system statistics."
     ::= { disk 2 }

diskSystemEntry  OBJECT-TYPE
     SYNTAX  DiskSystemEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "Disk system table structure."
     INDEX { diskSystemIndex }
     ::= { diskSystemTable 1 }
                
DiskSystemEntry ::= SEQUENCE {
     diskSystemIndex        INTEGER,
     diskModuleName         DisplayString,
     diskSystemName         DisplayString,
     diskSystemType         DisplayString,
     diskSystemSize         INTEGER,
     diskPartitionSize      INTEGER,
     diskPartitionUsed      INTEGER,
     diskPagePartitionSize  INTEGER,
     diskPagePartitionUsed  INTEGER,
     diskSystemFatalErrors  Counter,
     diskSystemDataErrors   Counter,
     diskSystemDiskReads    Counter,
     diskSystemDiskWrites   Counter,
     diskPartitionFree      INTEGER
 }

diskSystemIndex  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Location in table."
     ::= { diskSystemEntry 1 }                

diskModuleName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of module."
     ::= { diskSystemEntry 2 }                

diskSystemName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of disk for module."
     ::= { diskSystemEntry 3 }

diskSystemType  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Type of disk: Logical, Physical or Duplexed."
     ::= { diskSystemEntry 4 }

diskSystemSize  OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Size of disk in 4096 byte blocks."
     ::= { diskSystemEntry 5 }

diskPartitionSize OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Size of file partition in 4096 byte blocks."
     ::= { diskSystemEntry 6 }

diskPartitionUsed OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of disk partition used."
     ::= { diskSystemEntry 7 }

diskPagePartitionSize OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        "Size of page partition in 4096 byte blocks."
     ::= { diskSystemEntry 8 }

diskPagePartitionUsed OBJECT-TYPE
     SYNTAX  INTEGER (0..100)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Percent of page partition used."
     ::= { diskSystemEntry 9 }

diskSystemFatalErrors  OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of fatal errors for disk."
     ::= { diskSystemEntry 10 }                

diskSystemDataErrors  OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of data errors for disk."
     ::= { diskSystemEntry 11 }                

diskSystemDiskReads OBJECT-TYPE
     SYNTAX  Counter
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The total number of disk reads since the module was loaded."
     ::= { diskSystemEntry 12 }

diskSystemDiskWrites OBJECT-TYPE
     SYNTAX  Counter
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The total number of disk writes since the module was loaded."
     ::= { diskSystemEntry 13 }

--NEW in version 1.5.8
diskPartitionFree OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of unused 4096 byte blocks in partition."
     ::= { diskSystemEntry 14 }

-- The process statistics are stored in a table, one row per process.  This
-- is for all monitored modules.  The "psNumProcs" should be read first 
-- to avoid querying nonexistent rows in the table.  Since this table is
-- indexed on the process identifier assigned by VOS when the process
-- starts up, this is a sparse table.

psNumProcs OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Number of processes."
     ::= { processes 1 }

psTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF PsTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A simplified version of what is read from
         s$get_processes_info()."
     ::= { processes 2 }

psTableEntry  OBJECT-TYPE
     SYNTAX  PsTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A row in the process table."
     INDEX { psProcessId }
     ::= { psTable 1 }
                
PsTableEntry ::= SEQUENCE {
     psProcessId           INTEGER,
     psModuleName          DisplayString,
     psName                DisplayString,
     psPersonName          DisplayString,
     psGroupName           DisplayString,
     psProgramName         DisplayString,
     psInvokingProcessId   INTEGER,
     psState               INTEGER,
     psPriority            INTEGER,
     psCpuTime             TimeTicks,
     psPageFaultTime       TimeTicks,
     psPageFaults          Counter,
     psWorkingSetSize      INTEGER,
     psDiskReads           Counter,
     psDiskWrites          Counter,
     psNumInstances        INTEGER,
     psNumProgramInstances INTEGER
 }

psProcessId   OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "VOS process identifier."
     ::= { psTableEntry 1 }

psModuleName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..66))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of module."
     ::= { psTableEntry 2 }                

psName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..32))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Process name."
     ::= { psTableEntry 3 }                

psPersonName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..32))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Name of user who started the process."
     ::= { psTableEntry 4 }                

psGroupName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..32))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The group name of the user who the started process."
     ::= { psTableEntry 5 }                

psProgramName  OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..32))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The name of the currently executing command or program,
         if any, given to the process."
     ::= { psTableEntry 6 }                

psInvokingProcessId   OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "If this is a subprocess, this is the identifier of the process
         that created this process."
     ::= { psTableEntry 7 }

psState OBJECT-TYPE
     SYNTAX INTEGER {
          stopped(1),
          ready(2),
          prePage(3),
          memoryWait(4),
          waitShort(5),
          waitLong(6),
          postPurge(7),
          postPurgeReady(8),
          workingSetCalc(9),
          workingSetCalcReady(10)
     }
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Current state of the process."
     ::= { psTableEntry 8 }

psPriority OBJECT-TYPE
     SYNTAX INTEGER
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The process priority."
     ::= { psTableEntry 9 }

psCpuTime OBJECT-TYPE
     SYNTAX TimeTicks
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Actual execution time for process. (1/100s second)"
     ::= { psTableEntry 10 }

psPageFaultTime OBJECT-TYPE
     SYNTAX TimeTicks
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Accumulated time the processor has spent in page faults
         for this process.  (1/100s second)"
     ::= { psTableEntry 11 }

psPageFaults OBJECT-TYPE
     SYNTAX  Counter
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of page faults for the process since it was created."
     ::= { psTableEntry 12 }

psWorkingSetSize OBJECT-TYPE
     SYNTAX INTEGER 
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The number of pages in the current working set of the process."
     ::= { psTableEntry 13 }

psDiskReads OBJECT-TYPE
     SYNTAX  Counter
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The number of times the process has read data from the
         disk into an input buffer since the process was created.
         Does not include page fault accesses."
     ::= { psTableEntry 14 }

psDiskWrites OBJECT-TYPE
     SYNTAX  Counter
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The number of times the process has written data from an
         output buffer to disk since the process was created."
     ::= { psTableEntry 15 }

psNumInstances OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The number of copies of this process name running in this
         module."
     ::= { psTableEntry 16 }

psNumProgramInstances OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "The number of copies of this program name running in this module.
          If this name is empty, the value will be 0."
     ::= { psTableEntry 17 }

-- The user trap table is a circular buffer of user trap messages from 
-- all modules.  This table is not organized by module, rather the messages
-- are placed in the table in the order in which they arrive. These
-- messages are accessed using a virtual index, userTrapMsgsNumber, a 32
-- bit unsigned number which keeps incrementing with every new entry.
-- The number of log items retained in this table is specified by the 
-- configuration file variable UserTrapNum.  If this variable is not
-- set in the configuation file, this table will default to 40 log items.

userNumTrapMsgs OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Virtual index of largest entry in user trap table."
     ::= { userinfo 1 }

userTrapMsgsTable  OBJECT-TYPE
     SYNTAX  SEQUENCE OF UserTrapMsgsTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A table of messages from the user trap queue."
     ::= { userinfo 2 }

userTrapMsgsTableEntry  OBJECT-TYPE
     SYNTAX  UserTrapMsgsTableEntry
     ACCESS  not-accessible
     STATUS  mandatory
     DESCRIPTION
         "A row in the user trap message table."
     INDEX { userTrapMsgsNumber }
     ::= { userTrapMsgsTable 1 }
                
UserTrapMsgsTableEntry ::= SEQUENCE {
     userTrapMsgsNumber   INTEGER,
     userTrapMsgsMessage  OCTET STRING
 }

userTrapMsgsNumber   OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "Index number assigned to this user trap message entry."
     ::= { userTrapMsgsTableEntry 1 }

userTrapMsgsMessage  OBJECT-TYPE
     SYNTAX  OCTET STRING (SIZE (0..256))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "User trap queue message."
     ::= { userTrapMsgsTableEntry 2 }                

END