-- ================================================================= -- Copyright (C) 2001,2002 by Huawei-3Com TECHNOLOGIES. All rights reserved. -- -- Description: description of entity extend properties for huawei-3com products -- Reference: -- History V1.1 -- V1.0 Created by weixinzhe, Thursday, April 22, 2004 at 18:26:02 -- V1.1 modified by yelinhui, add h3cEntityExtMacAddress -- ================================================================= H3C-ENTITY-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS h3cCommon FROM HUAWEI-3COM-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC; h3cEntityExtend MODULE-IDENTITY LAST-UPDATED "200405100000Z" -- MAY 10, 2004 at 00:00 GMT ORGANIZATION "Huawei-3com Technologies co.,Ltd." CONTACT-INFO "Platform Team Beijing Institute Huawei-3com Tech, Inc. Http://www.huawei-3com.com E-mail:support@huawei-3com.com " DESCRIPTION "The private mib file includes the general extent information of the device." ::= { h3cCommon 6 } H3cAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The administrative state for this object, and it is possible to set the state when needed. A value of locked means the resource is administratively prohibited from use. A value of shuttingDown means that usage is administratively limited to current instances of use. A value of unlocked means the resource is not administratively prohibited from use." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported(1), locked(2), shuttingDown(3), unlocked(4) } H3cOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Represents the possible values of operational states. A value of disabled means the resource is totally inoperable. A value of enabled means the resource is partially or fully operable." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported (1), disabled(2), enabled(3), dangerous(4) } H3cAlarmStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the possible values of alarm status. When no bits of this attribute are set, then none of the status conditions described below are present. When the value of under repair is set, the resource is currently being repaired. When the value of critical is set, one or more critical alarms are active against the resource. When the value of major is set, one or more major alarms are active against the resource. When the value of minor is set, one or more minor alarms are active against the resource. When the value of warning is set, one or more warning alarms are active against the resource. When the value of indeterminate is set, one or more alarms of indeterminate severity are active against the resource. When the value of alarm outstanding is set, one or more alarms is active against the resource. The fault may or may not be disabling. " REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX BITS { notSupported (0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning (6), -- Not defined in X.731 indeterminate (7) -- Not defined in X.731 } H3cStandbyStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Represents the possible values of standby status. A value of hotStandby means the resource is not providing service, but is will be immediately able to take over the role of the resource to be backed-up, without the need for initialization activity, and will contain the same information as the resource to be backed up. A value of coldStandy means that the resource is to back-up another resource, but will not be immediately able to take over the role of a resource to be backed up, and will require some initialization activity. A value of providingService means the resource is providing service." REFERENCE "ITU Recommendation X.731, 'Information Technology - Open Systems Interconnection - System Management: State Management Function', 1992" SYNTAX INTEGER { notSupported (1), hotStandby(2), coldStandby(3), providingService(4) } h3cEntityExtObjects OBJECT IDENTIFIER ::= { h3cEntityExtend 1 } -- MIB contains four groups h3cEntityExtState OBJECT IDENTIFIER ::= { h3cEntityExtObjects 1 } h3cEntityExtStateTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cEntityExtStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here." ::= { h3cEntityExtState 1 } h3cEntityExtStateEntry OBJECT-TYPE SYNTAX H3cEntityExtStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information about a particular physical entity." INDEX { h3cEntityExtPhysicalIndex } ::= { h3cEntityExtStateTable 1 } H3cEntityExtStateEntry ::= SEQUENCE { h3cEntityExtPhysicalIndex INTEGER, h3cEntityExtAdminStatus H3cAdminState, h3cEntityExtOperStatus H3cOperState, h3cEntityExtStandbyStatus H3cStandbyStatus, h3cEntityExtAlarmLight H3cAlarmStatus, h3cEntityExtCpuUsage INTEGER, h3cEntityExtCpuUsageThreshold INTEGER, h3cEntityExtMemUsage INTEGER, h3cEntityExtMemUsageThreshold INTEGER, h3cEntityExtMemSize INTEGER, h3cEntityExtUpTime INTEGER, h3cEntityExtTemperature INTEGER, h3cEntityExtTemperatureThreshold INTEGER, h3cEntityExtVoltage INTEGER, h3cEntityExtVoltageLowThreshold INTEGER, h3cEntityExtVoltageHighThreshold INTEGER, h3cEntityExtCriticalTemperatureThreshold INTEGER, h3cEntityExtMacAddress MacAddress } h3cEntityExtPhysicalIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of h3cEntityExtStateTable. This index is identical to entPhysicalIndex in ENTITY-MIB" ::= { h3cEntityExtStateEntry 1 } h3cEntityExtAdminStatus OBJECT-TYPE SYNTAX H3cAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state for this object." ::= { h3cEntityExtStateEntry 2 } h3cEntityExtOperStatus OBJECT-TYPE SYNTAX H3cOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The operate state for this object. " ::= { h3cEntityExtStateEntry 3 } h3cEntityExtStandbyStatus OBJECT-TYPE SYNTAX H3cStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used for monitoring standby status. Not all entities support this object." ::= { h3cEntityExtStateEntry 4 } h3cEntityExtAlarmLight OBJECT-TYPE SYNTAX H3cAlarmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The alarm status for this entity. It does not include the severity of alarms raised on child components. In this condition, there will be a alarm light on the entity, the object should have the same status with it" ::= { h3cEntityExtStateEntry 5 } h3cEntityExtCpuUsage OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU usage for this entity. Generally, the CPU usage will caculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity. " ::= { h3cEntityExtStateEntry 6 } h3cEntityExtCpuUsageThreshold OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the CPU usage. When the CPU usage exceeds the threshold, a notification will be sent." ::= { h3cEntityExtStateEntry 7 } h3cEntityExtMemUsage OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The memory usage for the entity. This object indicates what percent of memory are used. " ::= { h3cEntityExtStateEntry 8 } h3cEntityExtMemUsageThreshold OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the Memory usage, When the memory usage exceeds the threshold, a notification will be sent." ::= { h3cEntityExtStateEntry 9 } h3cEntityExtMemSize OBJECT-TYPE SYNTAX INTEGER UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of memory for the entity." ::= { h3cEntityExtStateEntry 10 } h3cEntityExtUpTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The uptime for the entity. The meaning of uptime is when the entity is up, and the value of the object will add 1 seconds while the entity is running." ::= { h3cEntityExtStateEntry 11 } h3cEntityExtTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature for the entity." ::= { h3cEntityExtStateEntry 12 } h3cEntityExtTemperatureThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent." ::= { h3cEntityExtStateEntry 13 } h3cEntityExtVoltage OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage for the entity." ::= { h3cEntityExtStateEntry 14 } h3cEntityExtVoltageLowThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The low-threshold for the voltage. When voltage is lower than low-threshold, a notification will be sent." ::= { h3cEntityExtStateEntry 15 } h3cEntityExtVoltageHighThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The high-threshold for the voltage. When voltage greater than high-threshold, a notification will be sent. " ::= { h3cEntityExtStateEntry 16 } h3cEntityExtCriticalTemperatureThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " The threshold for the critical Temperature. When temperature exceeds the critical temperature, a notification will be sent. " ::= { h3cEntityExtStateEntry 17 } h3cEntityExtMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the entity." ::= { h3cEntityExtStateEntry 18 } h3cEntityExtTraps OBJECT IDENTIFIER ::= { h3cEntityExtend 2 } h3cEntityExtTrapsPrefix OBJECT IDENTIFIER ::= { h3cEntityExtTraps 0 } h3cEntityExtTemperatureThresholdNotification NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtTemperature, h3cEntityExtTemperatureThreshold, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtTemperatureThresholdNotification indicates the temperature exceeded the threshold. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failture of air-condition." ::= { h3cEntityExtTrapsPrefix 1 } h3cEntityExtVoltageLowThresholdNotification NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtVoltage, h3cEntityExtVoltageLowThreshold, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. If the voltage is lower too much than the entity needs, the entity will halt." ::= { h3cEntityExtTrapsPrefix 2 } h3cEntityExtVoltageHighThresholdNotification NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtVoltage, h3cEntityExtVoltageHighThreshold, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. If the voltage is higher too much than the entity needs, The entity may be damaged by the high voltage." ::= { h3cEntityExtTrapsPrefix 3 } h3cEntityExtCpuUsageThresholdNotfication NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtCpuUsage, h3cEntityExtCpuUsageThreshold, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtCpuUsageThresholdNotfication indicates the entity is overloaded." ::= { h3cEntityExtTrapsPrefix 4 } h3cEntityExtMemUsageThresholdNotification NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtMemUsage, h3cEntityExtMemUsageThreshold, h3cEntityExtMemSize, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtMemUsageThresholdNotification indicates the entity is overloaded." ::= { h3cEntityExtTrapsPrefix 5 } h3cEntityExtOperEnabled NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The trap indicates the entity is operable at present." ::= { h3cEntityExtTrapsPrefix 6 } h3cEntityExtOperDisabled NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The trap indicates the entity is not operable at present." ::= { h3cEntityExtTrapsPrefix 7 } h3cEntityExtCriticalTemperatureThresholdNotification NOTIFICATION-TYPE OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtTemperature, h3cEntityExtCriticalTemperatureThreshold, h3cEntityExtAdminStatus, h3cEntityExtAlarmLight } STATUS current DESCRIPTION "The h3cEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failture of air-condition." ::= { h3cEntityExtTrapsPrefix 8 } -- Conformance and Compliance h3cEntityExtConformance OBJECT IDENTIFIER ::= { h3cEntityExtend 3 } h3cEntityExtCompliances OBJECT IDENTIFIER ::= { h3cEntityExtConformance 1 } -- this module h3cEntityExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting this MIB." MODULE -- this module MANDATORY-GROUPS { h3cEntityExtGroup } OBJECT h3cEntityExtAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT h3cEntityExtCpuUsageThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT h3cEntityExtMemUsageThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT h3cEntityExtTemperatureThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT h3cEntityExtVoltageLowThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT h3cEntityExtVoltageHighThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { h3cEntityExtCompliances 1 } h3cEntityExtGroups OBJECT IDENTIFIER ::= { h3cEntityExtConformance 2 } h3cEntityExtGroup OBJECT-GROUP OBJECTS { h3cEntityExtPhysicalIndex, h3cEntityExtAdminStatus, h3cEntityExtOperStatus, h3cEntityExtStandbyStatus, h3cEntityExtAlarmLight, h3cEntityExtCpuUsage, h3cEntityExtCpuUsageThreshold, h3cEntityExtMemUsage, h3cEntityExtMemUsageThreshold, h3cEntityExtMemSize, h3cEntityExtUpTime, h3cEntityExtTemperature, h3cEntityExtTemperatureThreshold, h3cEntityExtVoltage, h3cEntityExtVoltageLowThreshold, h3cEntityExtVoltageHighThreshold, h3cEntityExtCriticalTemperatureThreshold, h3cEntityExtMacAddress } STATUS current DESCRIPTION "Standard HUAWEI Entity Extend group." ::= { h3cEntityExtGroups 1 } h3cEntityExtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { h3cEntityExtTemperatureThresholdNotification, h3cEntityExtVoltageLowThresholdNotification, h3cEntityExtVoltageHighThresholdNotification, h3cEntityExtCpuUsageThresholdNotfication, h3cEntityExtMemUsageThresholdNotification, h3cEntityExtOperEnabled, h3cEntityExtOperDisabled, h3cEntityExtCriticalTemperatureThresholdNotification } STATUS current DESCRIPTION "Standard Entity Extend Notification group for huawei-3com." ::= { h3cEntityExtGroups 2 } END