--
-- IRT4510HDA-MIB.my (MIB for HDA-4500 and HDA-4510)
-- v1.0	01/03/2005
-- 			- Original Issue.
--

	IRT4510HDA-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			irtProducts, irt			
				FROM IRT-MIB			
			OBJECT-TYPE			
				FROM RFC-1212			
			TRAP-TYPE			
				FROM RFC-1215			
			sysObjectID, sysName			
				FROM RFC1213-MIB;
	
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.16557.3.15
		irt4510HDA OBJECT IDENTIFIER ::= { irtProducts 15 }

		
		-- 1.3.6.1.4.1.16557.3.15.1
		irt4510Alarms OBJECT-TYPE
			SYNTAX INTEGER
				{
				noAlarms(1),
				urgentAlarms(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The current state of the Urgent Alarm."
			::= { irt4510HDA 1 }

		
		-- 1.3.6.1.4.1.16557.3.15.2
		irt4510InputPresent OBJECT-TYPE
			SYNTAX INTEGER
				{
				notPresent(1),
				present(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that an input signal is present."
			::= { irt4510HDA 2 }

		
		-- 1.3.6.1.4.1.16557.3.15.3
		irt4510Reset OBJECT-TYPE
			SYNTAX INTEGER (2)
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Writing a 2 to this object will cause the agent to reset."
			::= { irt4510HDA 3 }

		
		-- 1.3.6.1.4.1.16557.3.15.4
		irt4510Trap OBJECT-TYPE
			SYNTAX INTEGER
				{
				onAlarm(1),
				disabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, Traps will be sent when an Urgent Alarm occurs
				Traps will also be sent when the alarm condition ceases."
			::= { irt4510HDA 4 }

		
	
--
-- Trap definitions
--
	
		irt4510onAlarmTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4510Alarms }
			DESCRIPTION 
				"If enabled, this Trap will be sent when an Urgent Alarm
				occurs."
			::=  15

		irt4510offAlarmTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, irt4510Alarms }
			DESCRIPTION 
				"If enabled, this trap will be sent when the Alarm
				 restores."
			::=  143

	
	END

--
-- IRT4510HDA-MIB.my
--