-- -- IRT4551MEM-MIB.my (MIB for MEM-4551) -- v2.0 06/10/2009 -- - MIB regenerated for MIB Browser compatability. -- v1.0 07/01/2008 -- - Original Issue. -- IRT4551MEM-MIB DEFINITIONS ::= BEGIN IMPORTS irtProducts FROM IRT-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 sysObjectID, sysName, DisplayString FROM RFC1213-MIB; -- -- Node definitions -- -- 1.3.6.1.4.1.16557.3.30 irt4551MEM OBJECT IDENTIFIER ::= { irtProducts 30 } -- 1.3.6.1.4.1.16557.3.30.1 irt4551Alarms OBJECT-TYPE SYNTAX INTEGER { noAlarms(1), ethernetAlarm(2), asiAlarm(3), enetAndAsiAlarms(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the Urgent(Ethernet) and Non Urgent(ASI) alarms." ::= { irt4551MEM 1 } -- 1.3.6.1.4.1.16557.3.30.2 irt4551Status OBJECT IDENTIFIER ::= { irt4551MEM 2 } -- 1.3.6.1.4.1.16557.3.30.2.1 irt4551AsiInputPresent OBJECT-TYPE SYNTAX INTEGER { notPresent(1), present(2) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication that the ASI input signal is present." ::= { irt4551Status 1 } -- 1.3.6.1.4.1.16557.3.30.2.2 irt4551AsiPayloadRate OBJECT-TYPE SYNTAX INTEGER { mb1(1), mb2(2), mb3(3), mb4(4), mb5(5), mb6(6), mb7(7), mb8(8), mb9(9), mb10(10), mb11(11), mb12(12), mb13(13), mb14(14), mb15(15), mb16(16), mb17(17), mb18(18), mb19(19), mb20(20), mb21(21), mb22(22), mb23(23), mb24(24), mb25(25), mb30(26), mb36(27), mb54(28), mb72(29), mb108(30), g703mb34(31), g703mb45(32) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current data rate on the ASI output, ie mb1 is 1Mb/s." ::= { irt4551Status 2 } -- 1.3.6.1.4.1.16557.3.30.2.3 irt4551AsiError OBJECT-TYPE SYNTAX INTEGER { noError(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if there is an error in the ASI input signal." ::= { irt4551Status 3 } -- 1.3.6.1.4.1.16557.3.30.2.4 irt4551AsiPacketSize OBJECT-TYPE SYNTAX INTEGER { bytes204(1), bytes188(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The size of the ASI packets being received on the ASI input." ::= { irt4551Status 4 } -- 1.3.6.1.4.1.16557.3.30.2.5 irt4551ProgramNumber OBJECT-TYPE SYNTAX INTEGER { prgmNo4550(1), prgmNo4551(2), prgmNo4552(3), prgmNo4553(4), seeConfig(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The Program Number that is being used for the ASI streams." ::= { irt4551Status 5 } -- 1.3.6.1.4.1.16557.3.30.2.6 irt4551EthernetLink OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates that a link has been established on the Ethernet port." ::= { irt4551Status 6 } -- 1.3.6.1.4.1.16557.3.30.2.7 irt4551EthernetSpeed OBJECT-TYPE SYNTAX INTEGER { inactive(1), speed10(2), speed100(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates which of the two available speeds that the Ethernet port is operating." ::= { irt4551Status 7 } -- 1.3.6.1.4.1.16557.3.30.2.8 irt4551EthernetDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if the Ethernet port is in full or half duplex operation." ::= { irt4551Status 8 } -- 1.3.6.1.4.1.16557.3.30.2.9 irt4551EthernetActivity OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates activity on the Ethernet port." ::= { irt4551Status 9 } -- 1.3.6.1.4.1.16557.3.30.3 irt4551Config OBJECT IDENTIFIER ::= { irt4551MEM 3 } -- 1.3.6.1.4.1.16557.3.30.3.1 irt4551remoteControl OBJECT-TYPE SYNTAX INTEGER { notAllowed(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if remote setting by SNMP is allowed for the operating parameters." ::= { irt4551Config 1 } -- 1.3.6.1.4.1.16557.3.30.3.2 irt4551SetPrgmNo OBJECT-TYPE SYNTAX INTEGER (1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "The Program Number that is being used for the ASI streams. If an attempt to set this parameter is made while the Remote Control is not enabled, then the module will return genErr." ::= { irt4551Config 2 } -- 1.3.6.1.4.1.16557.3.30.3.3 irt4551SetAsiPayloadRate OBJECT-TYPE SYNTAX INTEGER { mb1(1), mb2(2), mb3(3), mb4(4), mb5(5), mb6(6), mb7(7), mb8(8), mb9(9), mb10(10), mb11(11), mb12(12), mb13(13), mb14(14), mb15(15), mb16(16), mb17(17), mb18(18), mb19(19), mb20(20), mb21(21), mb22(22), mb23(23), mb24(24), mb25(25), mb30(26), mb36(27), mb54(28), mb72(29), mb108(30), g703mb34(31), g703mb45(32) } ACCESS read-write STATUS mandatory DESCRIPTION "When in remote mode the ASI output payload rate has to be set." ::= { irt4551Config 3 } -- 1.3.6.1.4.1.16557.3.30.3.4 irt4551Trap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication whether traps are enabled from this module." ::= { irt4551Config 4 } -- 1.3.6.1.4.1.16557.3.30.3.5 irt4551Reset OBJECT-TYPE SYNTAX INTEGER { inactive(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Writing a 2 to this object will cause the agent to reset." ::= { irt4551Config 5 } -- 1.3.6.1.4.1.16557.3.30.4 irt4551FpgaVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The software version of the FPGA in the format 'x.y', where x is the major revision number and y is the minor revision." ::= { irt4551MEM 4 } -- -- Trap definitions -- irt4551AlarmTrap TRAP-TYPE ENTERPRISE irt4551MEM VARIABLES { sysObjectID, sysName, irt4551Alarms } DESCRIPTION "If enabled, traps will be sent when a change of irt4551Alarms occurs." ::= 30 END -- -- IRT4551MEM-MIB.my --