--
--

	IRT4600DTR-MIB DEFINITIONS ::= BEGIN

		IMPORTS
			irtProducts, irt
				FROM IRT-MIB
			OBJECT-TYPE
				FROM RFC-1212
			TRAP-TYPE
				FROM RFC-1215
			sysObjectID, sysName, DisplayString
				FROM RFC1213-MIB;

--
-- Node definitions
--

-- 1.3.6.1.4.1.16557.3.80
		irt4600DTR OBJECT IDENTIFIER ::= { irtProducts 80 }

	-- 1.3.6.1.4.1.16557.3.80.1
	channelInfoTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A list of channels."
		::= { irt4600DTR 1 }

	-- 1.3.6.1.4.1.16557.3.80.1.1
	channelInfoEntry OBJECT-TYPE
		SYNTAX ChannelInfoEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about each channel."
		INDEX { channelType }
		::= { channelInfoTable 1 }

	
	ChannelInfoEntry ::=
		SEQUENCE { 
			channelType
				INTEGER,
			channelAlarm
				INTEGER,        
			channelFormat
				INTEGER,
			channelOutonLoss
				INTEGER,
			channelAlias
				DisplayString,
			channelTrapEnable
				INTEGER	
		 }

	-- 1.3.6.1.4.1.16557.3.80.1.1.1
	channelType OBJECT-TYPE
		SYNTAX INTEGER
		{
			electrical(1),
			optical(2),
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Channel Type."
		::= { channelInfoEntry 1 }

	
	-- 1.3.6.1.4.1.16557.3.80.1.1.2
	channelAlarm OBJECT-TYPE
		SYNTAX INTEGER
			{
			alarm(1),
			noAlarm(2),
			aisDetected(3),
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An indication of channel alarm state."
		::= { channelInfoEntry 2 }

	-- 1.3.6.1.4.1.16557.3.80.1.1.3
	channelFormat OBJECT-TYPE
		SYNTAX INTEGER
			{
			notPresent(1),
			sdiSD(2),
			sdiHD(3),
			sdi3G(4),
			asi(5)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An indication of the input signal format."
		::= { channelInfoEntry 3 }

	-- 1.3.6.1.4.1.16557.3.80.1.1.4
	channelOutonLoss OBJECT-TYPE
		SYNTAX INTEGER
			{
			noOutput(1),
			sdiSD(2),
			sdiHD(3),
			sdi3G(4)
			}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An indication of the output signal format on loss of input."
		::= { channelInfoEntry 4 }


	-- 1.3.6.1.4.1.16557.3.80.1.1.5
	channelAlias OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"A 15 byte maximum Alias for the chosen Channel."
		::= { channelInfoEntry 5 }


	-- 1.3.6.1.4.1.16557.3.80.1.1.6
	channelTrapEnable OBJECT-TYPE
		SYNTAX INTEGER
		{
			notEnabled(1),
			enabled(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"Send a trap upon loss/restoration of input signal."
		::= {channelInfoEntry 6 }

	-- 1.3.6.1.4.1.16557.3.80.2
	firmwareVer OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the FPGA firmware."
		::= { irt4600DTR 2 }

	-- 1.3.6.1.4.1.16557.3.80.3
	softwareVer OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
		"Version of the processor software."
		::= { irt4600DTR 3 }

	-- 1.3.6.1.4.1.16557.3.80.4
	reset OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal(1),
			reset(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
		"To reset the system, set value to 2."
		::= { irt4600DTR 4 }

--
-- Trap definitions
--

	irt4600DTRCh1Trap TRAP-TYPE
		ENTERPRISE irt4600DTR
		VARIABLES { sysObjectID, sysName, channelAlarm, channelAlias }
		DESCRIPTION
		"If enabled, a trap will be sent upon loss/restoration
			of input signals."
		::= 1

	irt4600DTRCh2Trap TRAP-TYPE
		ENTERPRISE irt4600DTR
		VARIABLES { sysObjectID, sysName, channelAlarm, channelAlias }
		DESCRIPTION
		"If enabled, a trap will be sent upon loss/restoration
			of input signals."
		::= 2


	END