-- $Id: hynex-common.mib,v 1.22 2000/01/02 15:09:13 ezra Exp $ HYNEX-COMMON-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC1212 DisplayString FROM RFC1213-MIB RowStatus, TimeStamp FROM SNMPv2-TC; MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address in -- the "canonical" order -- defined by IEEE 802.1a, i.e., as if it were transmitted least -- significant bit first, even though 802.5 (in contrast to other -- 802.x protocols) requires MAC addresses to be transmitted most -- significant bit first. -- -- 16-bit addresses, if needed, are represented by setting their -- upper 4 octets to all 0's, i.e., AAFF would be represented -- as 00000000AAFF. PhysAddress ::= OCTET STRING(SIZE(20)) AtmLaneAddress ::= OCTET STRING (SIZE (20)) hynet OBJECT IDENTIFIER ::= { enterprises 809 } -- Define HyNEX OIDs hyOid OBJECT IDENTIFIER ::= { hynet 7 } hunt7100 OBJECT IDENTIFIER ::= { hyOid 1 } -- Basic HUNT hunt7100R OBJECT IDENTIFIER ::= { hyOid 2 } -- with Redundant Power Supply hunt7100FE OBJECT IDENTIFIER ::= { hyOid 3 } -- with Ethernet hunt7100FER OBJECT IDENTIFIER ::= { hyOid 4 } -- with Ethernet & Redundant PS -- Define objects for the common product common OBJECT IDENTIFIER ::= { hynet 2 } -- ********************************************************************* -- Software objects -- ********************************************************************* software OBJECT IDENTIFIER ::= { common 1 } -- ********************************************************************* general OBJECT IDENTIFIER ::= { software 1 } bootEpromVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 1 } bootEpromVersionDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 2 } swVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 3 } swVersionDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 4 } swKernelVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 5 } swVxWorksVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 6 } shellAdminPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The administartor password to access the system in encrypted format" ::= { general 7 } shellUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The user password to access the system in encrypted format" ::= { general 8 } operatingMode OBJECT-TYPE SYNTAX INTEGER { operational (1), testing (2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 9 } remoteLoadHostAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The (other node) Host IP address for file transfer" ::= { general 10 } remoteLoadUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The user name used for file transfer" ::= { general 11 } remoteLoadUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The password used for file transfer" ::= { general 12 } remoteLoadFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the file which will be up or down loaded" ::= { general 13 } remoteLoadAction OBJECT-TYPE SYNTAX INTEGER { none (1), up (2), down (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to activate either up or down loading via methods defined in remoteLoadMethod" ::= { general 14 } remoteLoadStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), loading (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used reflect the status of the remote loading task" ::= { general 15 } remoteLoadMethod OBJECT-TYPE SYNTAX INTEGER { ftp (1), tftpc (2), tftps (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol used for file transfer" ::= { general 16 } shellPrompt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { general 17 } -- ********************************************************************* httpFtpHostAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Host IP address for the java file transfer" ::= { general 18 } httpFtpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The user name used for java file transfer" ::= { general 19 } httpFtpUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The password used for java file transfer" ::= { general 20 } httpFtpPath OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The path name of the classes directory" ::= { general 21 } httpStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of http server" ::= { general 22 } restoreFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to activate restore of factory defaults in Non Volatile memories and reboot the system" ::= { general 23 } logMessageTable OBJECT-TYPE SYNTAX SEQUENCE OF LogMessageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Hynex Log Messages" ::= { general 50 } logMessageEntry OBJECT-TYPE SYNTAX LogMessageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry in the logMessageTable" INDEX { logMessageIndex } ::= { logMessageTable 1 } LogMessageEntry ::= SEQUENCE { logMessageIndex INTEGER, logMessageText DisplayString } logMessageIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of the log message. The lesser index corresponds to the newer log message" ::= { logMessageEntry 1 } logMessageText OBJECT-TYPE SYNTAX DisplayString(SIZE(0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "Text representation of a log message" ::= { logMessageEntry 2 } -- ********************************************************************* xip OBJECT IDENTIFIER ::= { software 2 } hostAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Our IP Address" ::= { xip 1 } hostNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Network Mask of Our IP Address" ::= { xip 2 } hostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Our IP Name" ::= { xip 3 } -- ********************************************************************* boot OBJECT IDENTIFIER ::= { software 3 } bootHostAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 1 } bootGatewayAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 2 } bootHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 3 } bootUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 4 } bootUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 5 } bootFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 6 } bootDevice OBJECT-TYPE SYNTAX INTEGER { flash (1), network (2), ram (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 7 } bootPort OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 8 } bootMethod OBJECT-TYPE SYNTAX INTEGER { ftp (1), tftpc (2), tftps (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 9 } bootLoadMedia OBJECT-TYPE SYNTAX INTEGER { flash (1), ram (2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { boot 10 } bootBaudRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "BOOT- Serial port default bootRate " ::= { boot 11 } bootAutoBaudTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "BOOT- Serial port autoBaud timeout " ::= { boot 12 } bootReboot OBJECT-TYPE SYNTAX INTEGER { execute (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to reboot the system via SNMP" ::= { boot 13 } bootRunVersion OBJECT-TYPE SYNTAX INTEGER { a (1), b (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The version in flash which will be used after reboot" ::= { boot 14 } bootCurrentVersion OBJECT-TYPE SYNTAX INTEGER { a (1), b (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The version in flash which is running new" ::= { boot 15 } -- ********************************************************************* snmp OBJECT IDENTIFIER ::= { software 4 } -- table which defines the possible community names for management operations communityTable OBJECT-TYPE SYNTAX SEQUENCE OF CommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SNMP access passwords" ::= { snmp 1 } communityEntry OBJECT-TYPE SYNTAX CommunityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { communityIndex } ::= { communityTable 1 } CommunityEntry ::= SEQUENCE { communityIndex INTEGER, communityName DisplayString, communityStatus RowStatus } communityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { communityEntry 1 } communityName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { communityEntry 2 } communityStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { communityEntry 3 } -- Table which defines the managers which may receive traps from this agent managerTable OBJECT-TYPE SYNTAX SEQUENCE OF ManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { snmp 2 } managerEntry OBJECT-TYPE SYNTAX ManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { managerIndex } ::= { managerTable 1 } ManagerEntry ::= SEQUENCE { managerIndex INTEGER, managerCommunity DisplayString, managerAddress IpAddress, managerTraps INTEGER, managerStatus RowStatus } managerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { managerEntry 1 } managerCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { managerEntry 2 } managerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { managerEntry 3 } managerTraps OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Value 'on' indicates that SNMP agent could send SNMP traps to the manager" ::= { managerEntry 4 } managerStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { managerEntry 6 } statisticsReset OBJECT-TYPE SYNTAX INTEGER { none(1), interfaces(2), aal5(3), snmp(4), ethernet(5) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { snmp 3 } -- ********************************************************************* pvc OBJECT IDENTIFIER ::= { software 5 } pvcTable OBJECT-TYPE SYNTAX SEQUENCE OF PvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { pvc 1 } -- This table describes the PVCs, which this bridge is connected to (remote -- Bridge configuration). pvcEntry OBJECT-TYPE SYNTAX PvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX {pvcVpi, pvcVci} ::= { pvcTable 1 } PvcEntry ::= SEQUENCE { pvcVpi INTEGER, pvcVci INTEGER, pvcPeakCellRate INTEGER, pvcEncapsulation INTEGER, pvcServiceType INTEGER, pvcServiceId INTEGER, pvcRowStatus RowStatus, pvcPeerMacAddress MacAddress, pvcPeerIpAddress IpAddress } pvcVpi OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Indication for this connection" ::= { pvcEntry 1 } pvcVci OBJECT-TYPE SYNTAX INTEGER (0..1023) ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Circuit Indication for this connection" ::= { pvcEntry 2 } pvcPeakCellRate OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "The peak line rate queue Id " ::= { pvcEntry 3 } pvcEncapsulation OBJECT-TYPE SYNTAX INTEGER { rfc1483LlcBridge(1), rfc1483LlcRoute(2), proprietary(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry describes the encapsulation method used for ethernet packets over ATM" ::= { pvcEntry 4 } pvcServiceType OBJECT-TYPE SYNTAX INTEGER { none(1), ethernet(2), ipMng(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The service which is used on this PVC. e.g.: ethernet uplink, IP for inbound management" DEFVAL {none} ::= { pvcEntry 5 } pvcServiceId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The service Id corresponding to service type, 1,2 for ethernet service 1-n for IP inbound management" ::= { pvcEntry 6 } pvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { pvcEntry 7 } pvcPeerMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "The MAC address of the peer station. used in Route Encapsulation " ::= { pvcEntry 8 } pvcPeerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the peer station. used in Route Encapsulation " ::= { pvcEntry 9 } -- ********************************************************************* mngIp OBJECT IDENTIFIER ::= { software 6 } ipNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP addresses (regardless of their current state) configured on this system." ::= { mngIp 1 } ipTable OBJECT-TYPE SYNTAX SEQUENCE OF IpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mngIp 2 } -- This table describes the own ip addresses, which this box can be accessed. e.g.: -- Telnet SNMP ipEntry OBJECT-TYPE SYNTAX IpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX {ipIndex} ::= { ipTable 1 } IpEntry ::= SEQUENCE { ipIndex INTEGER, ipAddress IpAddress, ipMask IpAddress, ipAutoConfig INTEGER, ipRowStatus RowStatus } ipIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index used for this entry" ::= { ipEntry 1 } ipAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address" ::= { ipEntry 2 } ipMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP network mask" ::= { ipEntry 3 } ipAutoConfig OBJECT-TYPE SYNTAX INTEGER { none(1), bootp(2), dhcp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry describes the protocol used to get from a remote server our IP address for this interface" DEFVAL {none} ::= { ipEntry 4 } ipRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipEntry 5 } ipForwardingState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates if the unit serves as Gateway for incoming IP packets" DEFVAL {disable} ::= { mngIp 3 } ipRouteCfgNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP route entries (regardless of their current state) configured on this system." ::= { mngIp 4 } -- This table describes the static routing, gateway per subnetwork ipRouteCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRouteCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { mngIp 5 } ipRouteCfgEntry OBJECT-TYPE SYNTAX IpRouteCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX {ipRouteCfgIndex} ::= { ipRouteCfgTable 1 } IpRouteCfgEntry ::= SEQUENCE { ipRouteCfgIndex INTEGER, ipRouteCfgNetAddress IpAddress, ipRouteCfgGatewayAddress IpAddress, ipRouteCfgRowStatus RowStatus } ipRouteCfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index used for this entry" ::= { ipRouteCfgEntry 1 } ipRouteCfgNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Network part of IP address" ::= { ipRouteCfgEntry 2 } ipRouteCfgGatewayAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the gateway" ::= { ipRouteCfgEntry 3 } ipRouteCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { ipRouteCfgEntry 4 } -- ********************************************************************* slip OBJECT IDENTIFIER ::= { software 7 } slipLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Our IP Address for the SLIP connection" ::= { slip 1 } slipNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Network Mask of Our SLIP IP Address" ::= { slip 2 } slipPeerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Peer IP Address for the SLIP connection" ::= { slip 3 } slipBaudRate OBJECT-TYPE SYNTAX INTEGER { none(0), b300(1), b600(2), b1200(3), b2400(4), b4800(5), b9600(6), b19200(7), b38400(8) } ACCESS read-write STATUS mandatory DESCRIPTION "The baudrate for the serial line used for SLIP, 0 means no change in default setup of the line" ::= { slip 4 } slipCompress OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates If TCP/IP headers are compressed" DEFVAL {enable} ::= { slip 5 } -- ********************************************************************* modem OBJECT IDENTIFIER ::= { software 8 } modemControlState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates weather the modem signals are used to control the state of the user shell interface. The reason for that is security. e.g: When the modem disconnects, then the unit should exit to the login display" DEFVAL {disable} ::= { modem 1 } modemSignalCTS OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Reflects the CTS signal value as sensed by the UART" DEFVAL {unknown} ::= { modem 2 } modemSignalCD OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Reflects the CD signal value as sensed by the UART" DEFVAL {unknown} ::= { modem 3 } -- ********************************************************************* defaultIp OBJECT IDENTIFIER ::= { software 9 } defaultIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Our factory default IP Address" ::= { defaultIp 1 } defaultNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Factory default Network Mask of Our IP Address" ::= { defaultIp 2 } defaultGatewayAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Factory default IP address of the gateway" ::= { defaultIp 3 } defaultPvcVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Factory default Vpi for the PVC used for IP Management" DEFVAL {1} ::= { defaultIp 4 } defaultPvcVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Factory default Vci for the PVC used for IP Management" DEFVAL {32} ::= { defaultIp 5 } defaultPvcPeakRate OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "The peak line rate queue Id " DEFVAL {1} ::= { defaultIp 6 } defaultPvcEncapsulation OBJECT-TYPE SYNTAX INTEGER { rfc1483LlcBridge(1), rfc1483LlcRoute(2), proprietary(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry describes the encapsulation method used for ethernet packets over ATM" DEFVAL {rfc1483LlcBridge} ::= { defaultIp 7 } -- ********************************************************************* -- ********************************************************************* -- hardware objects hardware OBJECT IDENTIFIER ::= { common 2 } -- ********************************************************************* motherboard OBJECT IDENTIFIER ::= { hardware 1 } temperature OBJECT IDENTIFIER ::= { hardware 2 } battery OBJECT IDENTIFIER ::= { hardware 3 } hySystem OBJECT IDENTIFIER ::= { hardware 5 } hwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { motherboard 1 } xilinxBp4Version OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { motherboard 2 } xilinxQlanVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { motherboard 3 } boardType OBJECT-TYPE SYNTAX INTEGER { atmT1 (1), atmE1 (2), atmT3 (3), atm4B5B (4), -- 100 Mbit fiber atmOC3N (5), atmOC3R (6) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { motherboard 4 } boardSerial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { motherboard 5 } -- -- -- Tempurature Sensor MIB -- -- tempCoreState OBJECT-TYPE SYNTAX INTEGER {normal(1),warning1(2), warning2(3),error(4)} ACCESS read-only STATUS mandatory DESCRIPTION "Core Tempurature Sensor normal - x <= 48C warning1 - 48C < x <= 60C warning2 - 60C < x error - sensor sevice error" ::= { temperature 1 } -- -- -- NVRAM Battery Sensor -- -- batteryNVRAM OBJECT-TYPE SYNTAX INTEGER {enabled(1), disabled(2)} ACCESS read-write STATUS mandatory DESCRIPTION "NVRAM battery enable/disable" ::= { battery 1 } batteryNVRAMLowAlarm OBJECT-TYPE SYNTAX INTEGER {none(1), fault(2)} ACCESS read-only STATUS mandatory DESCRIPTION "NVRAM battery Low" ::= { battery 2 } systemType OBJECT-TYPE SYNTAX INTEGER { hunt7100 (1), hunt7100R (2), hunt7100FE (3), hunt7100FER (4) } ACCESS read-only STATUS mandatory DESCRIPTION "real OID of the HUNT" ::= { hySystem 1 } END