-- $Id: modules.mib,v 1.17 1999/05/30 09:53:35 idan Exp $
HYNEX-MODULE-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		enterprises, NetworkAddress, IpAddress, Counter,
		Gauge, TimeTicks
			FROM RFC1155-SMI
		OBJECT-TYPE
			FROM RFC1212;


--     *********************************************************************
--     Software objects

--     *********************************************************************

hynet 	OBJECT IDENTIFIER ::= { enterprises 809 }
common        OBJECT IDENTIFIER ::= { hynet 2 }
hardware      OBJECT IDENTIFIER ::= { common 2 }


modules OBJECT IDENTIFIER ::= { hardware 4 }


moduleTable  OBJECT-TYPE
              SYNTAX  SEQUENCE OF ModuleEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "Table of modules"
              ::=  { modules 1 }

moduleEntry OBJECT-TYPE
                SYNTAX  ModuleEntry
                ACCESS  not-accessible
                STATUS  mandatory
                DESCRIPTION
                         "An entry in the module table"
                INDEX   { moduleIndex }
                ::= { moduleTable 1 }

ModuleEntry ::=
        SEQUENCE {
		moduleIndex
			INTEGER,
		moduleType
			INTEGER,
		moduleTypeVariant
			INTEGER,
		moduleAdminState
			INTEGER,
		moduleOperState
			INTEGER,
		moduleBaseIfIndexNumber
			INTEGER,
		moduleIfIndexesNumber
			INTEGER,
		moduleLocationIndex
			INTEGER,
		moduleLocationSlot
			INTEGER
                }

moduleIndex  OBJECT-TYPE
              SYNTAX  INTEGER 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Index of module"
              ::=  { moduleEntry 1}


moduleType OBJECT-TYPE
              SYNTAX  INTEGER {
			  core(1),
  			  lan(2),
			  swc(3),
			  lim(4),
			  shaper(5),
	                  csm(6)
			}
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Type of Module"
              ::=  { moduleEntry 2}

moduleTypeVariant OBJECT-TYPE
              SYNTAX  INTEGER {
			  unknown(1),              -- fantom defined by manager
			  novar(2),                -- only one variant exists

  		-- CORE 
			  core-960(3),             -- hylink 82000
			  core-960-86(4),          -- muxlink 86000
			  hunt-960(5),	        -- HUNT i960 Core
			  hunt-860(6),  		-- MC860 core Modules

	  	-- SWC
			  a(7),                    -- HUNT-A
			  b(8),                    -- HUNT-B

	        -- LIM
			  oc3(9),
			  dsx3(10),
			  dsx1(11),
                -- CSM
                          ces-ds1(12),
                          ces-ds3(13),

			  x21(14),

		-- OC3
			  oc3-82(15),
			  oc3-86(16),
			  e3-82(17),
			  t3-82(18),
  
		-- LAN
			  olan(19),
			  felan(20),                -- FAST Ethernet
			  felanii(21),
			  flan(22)                  -- FDDI
			}
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Type Variant of Module"
              ::=  { moduleEntry 3}

moduleAdminState OBJECT-TYPE
              SYNTAX  INTEGER { 
			oos(1),
			active(2),
			standby(3),
			maintenance(4)
			} 
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "	
			active - module should be activated if present
			standby - module placed in stadby if present
			oos - module be ignored if present
			maintenance - module is in maintenance.
				on Reboot, returns to preveous state"

              ::=  { moduleEntry 4}

moduleOperState OBJECT-TYPE
              SYNTAX  INTEGER {
			oos(1),
			active(2), 
			standby(3), 
			maintenance(4),
                        fault(5)
			} 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "
			active - module is active
			standby - module is in standby mode
			oos - module is ignored
			fault - module is defective or missing
			maintenance - mentenace is being performed"
			
              ::=  { moduleEntry 5}

moduleBaseIfIndexNumber  OBJECT-TYPE
              SYNTAX  INTEGER 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Base If index"
              ::=  { moduleEntry 6}

moduleIfIndexesNumber  OBJECT-TYPE
              SYNTAX  INTEGER 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "If indexes number"
              ::=  { moduleEntry 7}

moduleLocationIndex  OBJECT-TYPE
              SYNTAX  INTEGER 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Index of location"
              ::=  { moduleEntry 8}

moduleLocationSlot  OBJECT-TYPE
              SYNTAX  INTEGER 
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Location's slot"
              ::=  { moduleEntry 9}
END