-- ********************************************************************* -- Copyright (c) 1998-2005 Tiara Networks Inc. -- All rights reserved. -- -- April,1st 1998, kumar -- -- -- MIB Tree Overview: -- -- --dsxMIB -- |_dsxT1E1IfGroup -- | |_dsxT1E1MIB -- | |_dsxT1E1IfConfigGroup -- | | |_dsxT1E1IfConfigLineTable -- | | |_dsxT1E1IfConfigFdlTable -- | | |_dsxT1E1IfAlarmConfigGroup -- | | | |_dsxT1E1IfAlarmThresholdConfigTable {te1IfIndex, configIndex} -- | | |_dsxT1E1IfTestConfigTable -- | |_dsxT1E1IfStatusGroup -- | | |_dsxT1E1IfStatusTable -- | | |_dsxT1E1IfAlarmStatusTable -- | | |_dsxT1E1IfTestStatusTable -- | | |_dsxT1E1IfLastTestResultTable -- | |_dsxT1E1IfStatsGroup -- | | |_dsxT1E1IfArchiveStatsValidIntervalsTable -- | | |_dsxT1E1IfAnsiStatsGroup -- | | | |_dsxT1E1IfAnsiCurrentStatsTable -- | | | |_dsxT1E1IfAnsiTotalStatsTable -- | | | | dsxT1E1IfAnsiArchiveIntervalStatsTable {te1IfIndex, interval number } -- | | |_dsxT1E1IfAttStatsGroup -- | | | |_dsxT1E1IfAttCurrentStatsTable -- | | | |_dsxT1E1IfAttTotalStatsTable -- | | | |_dsxT1E1IfAttArchiveStatsTable {te1IfIndex,interval number} -- | | |_dsxT1E1IfIetfStatsGroup -- | | | |_dsxT1E1IfIetfCurrentStatsTable -- | | | |_dsxT1E1IfIetfTotalStatsTable -- | | | |_dsxT1E1IfIetfArchiveStatsTable { te1IfIndex,interval number } -- | | |_dsxT1E1IfUserStatsGroup -- | | | |_dsxT1E1IfUserCurrentStatsTable -- | | | |_dsxT1E1IfUserTotalStatsTable { te1IfIndex, day } -- | | | |_dsxT1E1IfUserLifetimeStatsTable -- | | | |_dsxT1E1IfUserArchiveStatsTable { te1IfIndex,interval number } -- *************************************************************************** TIARA-NETWORKS-DSX-TE1-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI dsxT1E1IfGroup FROM TIARA-NETWORKS-DSX-TC-MIB TruthValue FROM SNMPv2-TC DisplayString FROM RFC1213-MIB; dsxT1E1MIB MODULE-IDENTITY LAST-UPDATED "9904230000Z" ORGANIZATION "Tiara Networks Inc." CONTACT-INFO " Tiara Networks Customer Service Postal: 525 Race Street, Suite 100, San Jose, CA 95126 USA Tel: +1 408-216-4700 Fax: +1 408-216-4701 E-mail: support@tiaranetworks.com" DESCRIPTION " Interface MIB definitions for Tiara T1/E1 interface modules." REVISION "9904230000Z" DESCRIPTION "Initial revision." ::= { dsxT1E1IfGroup 1 } -- TE1 Interface Group -- A definition template to be used for all other types of -- interfaces -- Assigments for T1E1 Traps dsxT1E1Traps OBJECT IDENTIFIER ::= { dsxT1E1IfGroup 2} dsxT1E1TrapVariables OBJECT IDENTIFIER ::= { dsxT1E1Traps 1} -- T1/E1 Interface sub-group definitions dsxT1E1IfConfigGroup OBJECT IDENTIFIER ::= { dsxT1E1MIB 1 } dsxT1E1IfStatusGroup OBJECT IDENTIFIER ::= { dsxT1E1MIB 2 } dsxT1E1IfStatsGroup OBJECT IDENTIFIER ::= { dsxT1E1MIB 3 } -- DSX T1/E1 Interface Configuration group definitions -- DSX T1/E1 interface configuration table dsxT1E1IfConfigLineTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfConfigLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interfaces currently configured." ::= { dsxT1E1IfConfigGroup 1 } dsxT1E1IfConfigLineEntry OBJECT-TYPE SYNTAX DsxT1E1IfConfigLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing configuration for each T1/E1 interface." INDEX { dsxT1E1IfIndex } ::= { dsxT1E1IfConfigLineTable 1 } DsxT1E1IfConfigLineEntry ::= SEQUENCE { dsxT1E1IfIndex INTEGER, dsxT1E1IfConfigServiceMode TruthValue, dsxT1E1IfConfigLineMode INTEGER, dsxT1E1IfConfigLineType INTEGER, dsxT1E1IfConfigLineCode INTEGER, dsxT1E1IfConfigLBO INTEGER, dsxT1E1IfConfigCableLength INTEGER, dsxT1E1IfConfigRaiAlarm INTEGER, dsxT1E1IfConfigTransmitClock INTEGER, dsxT1E1IfConfigTimeSlotMap OCTET STRING, dsxT1E1IfCircuitId DisplayString, dsxT1E1IfContactInfo DisplayString, dsxT1E1IfDescription DisplayString } dsxT1E1IfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds1" ::= { dsxT1E1IfConfigLineEntry 1 } dsxT1E1IfConfigServiceMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the T1/E1 interface is in service if it is TRUE. " ::= { dsxT1E1IfConfigLineEntry 2 } dsxT1E1IfConfigLineMode OBJECT-TYPE SYNTAX INTEGER { linemode-csu (1), linemode-dsx (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Line Mode for this T1/E1 interface" ::= { dsxT1E1IfConfigLineEntry 3 } dsxT1E1IfConfigLineType OBJECT-TYPE SYNTAX INTEGER { linetype-esf (2), linetype-d4 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the variety of T1/E1 interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Extended SuperFrame DS1 d4 AT&T D4 format DS1" ::= { dsxT1E1IfConfigLineEntry 4 } dsxT1E1IfConfigLineCode OBJECT-TYPE SYNTAX INTEGER { linecode-b8zs (2), linecode-ami (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { dsxT1E1IfConfigLineEntry 5 } dsxT1E1IfConfigLBO OBJECT-TYPE SYNTAX INTEGER { lbo-zero-db (1), lbo-75-db (2), lbo-15-db (3), lbo-225-db (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Signal attenuation at 772 kHz lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db lbo-75-db carrier advised LBO code B 7.5 - 13.0 db lbo-15-db carrier advised LBO code C 15.0 - 22.0 db This variable can be set only for CSU linemode" ::= { dsxT1E1IfConfigLineEntry 6 } dsxT1E1IfConfigCableLength OBJECT-TYPE SYNTAX INTEGER { cable-length-0-133 (1), cable-length-133-266 (2), cable-length-266-399 (3), cable-length-399-533 (4), cable-length-533-655 (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the length of the cable in feet." ::= { dsxT1E1IfConfigLineEntry 7 } dsxT1E1IfConfigRaiAlarm OBJECT-TYPE SYNTAX INTEGER { rai-gen-enable (1), rai-det-enable (2), rai-gen-det-enable (3), rai-disable (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configurition of Remote Alarm Indication Alarm generation and detection." ::= { dsxT1E1IfConfigLineEntry 8 } dsxT1E1IfConfigTransmitClock OBJECT-TYPE SYNTAX INTEGER { timing-line (1), timing-internal (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Transmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-internal' indicates that a local clock source is used." ::= { dsxT1E1IfConfigLineEntry 9 } dsxT1E1IfConfigTimeSlotMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time slot map of the T1/E1 line that are being used if it is used corresponding bit position is set." ::= { dsxT1E1IfConfigLineEntry 10 } dsxT1E1IfCircuitId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { dsxT1E1IfConfigLineEntry 11 } dsxT1E1IfContactInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { dsxT1E1IfConfigLineEntry 12 } dsxT1E1IfDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { dsxT1E1IfConfigLineEntry 13 } -- DSX T1/E1 interface FDL configuration table -- This table is applicable for T1 lines that are in ESF mode dsxT1E1IfConfigFdlTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfConfigFdlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface currently configured." ::= { dsxT1E1IfConfigGroup 2 } dsxT1E1IfConfigFdlEntry OBJECT-TYPE SYNTAX DsxT1E1IfConfigFdlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configurable Facility Data Link (FDL) field for enable/disable the FDL utility on T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfConfigFdlTable 1 } DsxT1E1IfConfigFdlEntry ::= SEQUENCE { dsxT1E1IfConfigFdl INTEGER, dsxT1E1IfConfigFdlCsuDsuType INTEGER } dsxT1E1IfConfigFdl OBJECT-TYPE SYNTAX INTEGER { fdl-ansi-only (1), fdl-att-only (2), fdl-ansi-att (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration FDL type fdl-ansi-only - only supports ANSI FDL , fdl-att-only only supports ATT FDL, fdl-ansi-att supports both ANSI and ATT FDL." ::= { dsxT1E1IfConfigFdlEntry 1 } dsxT1E1IfConfigFdlCsuDsuType OBJECT-TYPE SYNTAX INTEGER { fdl-csu (1), fdl-dsu (2), fdl-csudsu (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration of the type of equipment fdl-csu - responds to only CSU FDL requests fdl-dsu - responds to only DSU FDL requests fdl-csudsu - responds to both CSU and DSU requests." ::= { dsxT1E1IfConfigFdlEntry 2 } -- DSX T1/E1 interface alarm configuration table dsxT1E1IfAlarmConfigGroup OBJECT IDENTIFIER ::= {dsxT1E1IfConfigGroup 3 } -- DSX T1/E1 Alarm Threshold Configuration Table -- In order to configure a alarm Threshold, all the columns are mandatory -- and failure to proide all the columns will result in badValue Error dsxT1E1IfAlarmThresholdConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAlarmThresholdConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface alarm threshold configuration parameters." ::= { dsxT1E1IfAlarmConfigGroup 1 } dsxT1E1IfAlarmThresholdConfigEntry OBJECT-TYPE SYNTAX DsxT1E1IfAlarmThresholdConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing alarm configuration parameters for each T1/E1 interface. " INDEX { dsxT1E1IfIndex, dsxT1E1IfAlarmThresholdConfigIndex } ::= { dsxT1E1IfAlarmThresholdConfigTable 1 } DsxT1E1IfAlarmThresholdConfigEntry ::= SEQUENCE { dsxT1E1IfAlarmThresholdConfigIndex INTEGER, dsxT1E1IfAlarmThresholdConfigObject INTEGER, dsxT1E1IfAlarmThresholdConfigSamplingInterval INTEGER, dsxT1E1IfAlarmThresholdConfigSampleType INTEGER, dsxT1E1IfAlarmThresholdConfigStartupType TruthValue, dsxT1E1IfAlarmThresholdConfigRisingThreshold INTEGER, dsxT1E1IfAlarmThresholdConfigFallingThreshold INTEGER } dsxT1E1IfAlarmThresholdConfigIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Threshold Alarms 1 - 10." ::= { dsxT1E1IfAlarmThresholdConfigEntry 1 } dsxT1E1IfAlarmThresholdConfigObject OBJECT-TYPE SYNTAX INTEGER { te1-object-eev (1), te1-object-es (2), te1-object-uas (3), te1-object-bes (4), te1-object-ses (5), te1-object-lofc (6), te1-object-css (7), te1-object-bpv (8), te1-object-oof (9), te1-object-crc (10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold alarm - variables being monitored." ::= { dsxT1E1IfAlarmThresholdConfigEntry 2 } dsxT1E1IfAlarmThresholdConfigSamplingInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling Interval is the time between each sampling period." ::= { dsxT1E1IfAlarmThresholdConfigEntry 3 } dsxT1E1IfAlarmThresholdConfigSampleType OBJECT-TYPE SYNTAX INTEGER { sample-absolute (1), sample-delta (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold Alarm: Sampling type sample-absolute - compares the monitored variable value againist the thresholds, sample-delta - compares the monitored variable value change from previous interval against thresholds." ::= { dsxT1E1IfAlarmThresholdConfigEntry 4 } dsxT1E1IfAlarmThresholdConfigStartupType OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold Alarm :if TRUE the first sample will be ignored if thresholds are crossed." ::= { dsxT1E1IfAlarmThresholdConfigEntry 5 } dsxT1E1IfAlarmThresholdConfigRisingThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold Alarm: Rising threshold limit " ::= { dsxT1E1IfAlarmThresholdConfigEntry 6 } dsxT1E1IfAlarmThresholdConfigFallingThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold Alarm: Falling threshold limit " ::= { dsxT1E1IfAlarmThresholdConfigEntry 7 } -- DSX T1/E1 interface Test configuration table dsxT1E1IfTestConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfTestConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test configuration parameters." ::= { dsxT1E1IfConfigGroup 4 } dsxT1E1IfTestConfigEntry OBJECT-TYPE SYNTAX DsxT1E1IfTestConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing test configuration parameters for each currently T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfTestConfigTable 1 } DsxT1E1IfTestConfigEntry ::= SEQUENCE { dsxT1E1IfTestConfigType INTEGER, dsxT1E1IfTestConfigTime Unsigned32, dsxT1E1IfTestConfigPattern INTEGER, dsxT1E1IfTestConfigLoopCode INTEGER } dsxT1E1IfTestConfigType OBJECT-TYPE SYNTAX INTEGER { no-test (1), payload-loopback-test (2), line-loopback-test (3), pattern-test (6), remote-lpup-test (7), remote-lpdn-test (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test type. Specifies the type of test to execute on this T1/E1 interface. To perform no-test, payload-loopback-test, line-loopback-test only TestType is mandatory. To perform pattern-test, ConfigTime and ConfigPattern are mandatory. To perform remote-lpup-test and remote-lpdn-test, ConfigLoopCode is mandatory" ::= { dsxT1E1IfTestConfigEntry 1 } dsxT1E1IfTestConfigTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Test time. when set to 0, test time is unlimited. Otherwise duration of test, specified in seconds." ::= { dsxT1E1IfTestConfigEntry 2 } dsxT1E1IfTestConfigPattern OBJECT-TYPE SYNTAX INTEGER { pattern-all-ones (1), pattern-all-zeros (2), reserved1 (3), reserved2 (4), reserved3 (5), reserved4 (6), reserved5 (7), reserved6 (8), reserved7 (9), reserved9 (10), reserved10 (11), reserved11 (12), pattern-215minus1 (13), reserved12 (14), pattern-qrw (15), pattern-223minus1 (16) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bit Pattern type used in testing T1/E1 for Pattern Test." ::= { dsxT1E1IfTestConfigEntry 3 } dsxT1E1IfTestConfigLoopCode OBJECT-TYPE SYNTAX INTEGER { loopcode-none (1), loopcode-line-standard (2), loopcode-line-alternate (3), loopcode-line-ATTFDL (4), loopcode-payload-ATTFDL (6), loopcode-payload-ansiFDL (7) } MAX-ACCESS read-write STATUS current DESCRIPTION " Type of loopcode is used for loopback test." ::= { dsxT1E1IfTestConfigEntry 4 } -- DSX T1/E1 interface status Group definitions dsxT1E1IfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface status entries" ::= { dsxT1E1IfStatusGroup 1 } dsxT1E1IfStatusEntry OBJECT-TYPE SYNTAX DsxT1E1IfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfStatusTable 1 } DsxT1E1IfStatusEntry ::= SEQUENCE { dsxT1E1IfStatusLineStatus BITS, dsxT1E1IfStatusTransmitClock INTEGER } dsxT1E1IfStatusLineStatus OBJECT-TYPE SYNTAX BITS { reserved1 (0), reserved2 (1), rraiStatus (2), traiStatus (3), rlosStatus (4), risStatus (5), rexzStatus (6), reserved3 (7), reserved4 (8), reserved5 (9), lorcStatus (10), tpdeStatus (11), reserved6 (12), reserved7 (13), sendLineCode (14), sendPayLoadCode (15), sendResetCode (16), sendTE1Code (17), sendPattern (18), reserved8 (19), rcvTestCode (20), reserved9 (21), reserved10 (22), reserved11 (23), loopbackStatus (24), reserved12 (25), reserved13 (26), taisStatus (27), raisStatus (28), reserved14 (29), rlofStatus (30), reserved15 (31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The summary of the status RRAIStatus - Recieve RAI (Recieve Alarm Indication), TRAIStatus - Transmit RAI , RLOSStatus - Recieve Loss Of Sync, RISStatus - Recieve Idle Signal REXZStatus - Recieve Excessive Zeros, LORCStatus - Loss Of Recive Clock (LORC), TDEStatus - transmit pulse density, SendLineCode - transmit linecode SendPayLoadCode - transmit paylode code SendResetCode - transmit reset code, SendTE1Code - transmit T1/E1 linecode, SendPattern - transmit T1/E1 Pattern, RcvTestCode - recive test code, LoopbackStatus - Status of Loop back, TAISStatus - Transmit Alarm Indication Siganl, RAISStatus - Recieve Alarm Indication Signal, LOFStatus - Loss Of Frame. " ::= { dsxT1E1IfStatusEntry 1 } dsxT1E1IfStatusTransmitClock OBJECT-TYPE SYNTAX INTEGER { timing-line (1), timing-internal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of Tranmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-internal' indicates that a local clock source is used." ::= { dsxT1E1IfStatusEntry 2 } -- DSX T1/E1 interface alarm status Group definitions dsxT1E1IfAlarmStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface alarm status entries" ::= { dsxT1E1IfStatusGroup 2 } dsxT1E1IfAlarmStatusEntry OBJECT-TYPE SYNTAX DsxT1E1IfAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing alarm status for each T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfAlarmStatusTable 1 } DsxT1E1IfAlarmStatusEntry ::= SEQUENCE { dsxT1E1IfAlarmStatusAlarmStatus BITS, dsxT1E1IfAlarmStatusThresholdStatus BITS } dsxT1E1IfAlarmStatusAlarmStatus OBJECT-TYPE SYNTAX BITS { rraiAlarm (0), traiAlarm (1), raisAlarm (2), taisAlarm (3), rlofAlarm (4), rlosAlarm (5), loopbackStateAlarm (6), rcvTestCode (7), risAlarm (8), rexzAlarm (9), rfebeAlarm (10), rpeAlarm (11), rcpeAlarm (12), lorcAlarm (13), tpdeAlarm (14), tfebeAlarm (15), ibTestAlarm (16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm Status of T1/E1 interface. RRAI - Recieve Rx Alarm Indication, TRAI - Transmit Rx Alarm Indication, RAIS - Recieve Alarm Indication Signal, TAIS - Transmit Alarm Indication Signal, RLOF - Recieve Loss Of Frame, RLOS - Recieve Loss Of Signal, Loopback - if looped back state is true, RIS - Recieve Idle Signal, REXZ - Recieve Excessive Zeros, RFEBE - Recieve Far End Block Error, RPE - Recieve Parity Error, RCPE - Recieve C-Parity Error, LORC - Loss Of Recieve Clock, TPDE - Transmit Pulse DEnsity, TFEBE - Transmit Far End Block Error, ibTest - InBand Test running if true." ::= { dsxT1E1IfAlarmStatusEntry 1 } dsxT1E1IfAlarmStatusThresholdStatus OBJECT-TYPE SYNTAX BITS { threshold1 (0), threshold2 (1), threshold3 (2), threshold4 (3), threshold5 (4), threshold6 (5), threshold7 (6), threshold8 (7), threshold9 (8), threshold10 (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the user configurable threshold Alarms 1 means present." ::= { dsxT1E1IfAlarmStatusEntry 2 } -- DSX T1/E1 interface test status Group definitions dsxT1E1IfTestStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfTestStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfStatusGroup 3 } dsxT1E1IfTestStatusEntry OBJECT-TYPE SYNTAX DsxT1E1IfTestStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing test status entry for each T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfTestStatusTable 1 } DsxT1E1IfTestStatusEntry ::= SEQUENCE { dsxT1E1IfTestStatusTestType INTEGER, dsxT1E1IfTestStatusTestTime Unsigned32, dsxT1E1IfTestStatusTestState INTEGER, dsxT1E1IfTestStatusTestPattern INTEGER, dsxT1E1IfTestStatusLockedSeconds Unsigned32, dsxT1E1IfTestStatusSyncLossCount Unsigned32, dsxT1E1IfTestStatusErrorCount Unsigned32, dsxT1E1IfTestStatusLoopCode INTEGER } dsxT1E1IfTestStatusTestType OBJECT-TYPE SYNTAX INTEGER { testtype-notest (1), testtype-payload-loopback (2), testtype-line-loopback (3), testtype-pattern (6), testtype-remote-lpup (7), testtype-remote-lpdn (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Test type initiated on T1/E1 line." ::= { dsxT1E1IfTestStatusEntry 1 } dsxT1E1IfTestStatusTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed since the test started on T1/E1 line " ::= { dsxT1E1IfTestStatusEntry 2 } dsxT1E1IfTestStatusTestState OBJECT-TYPE SYNTAX INTEGER { test-state-idle (1), test-state-searching (2), test-state-locked (3), test-state-relocked (4), test-state-inprogress (5), test-state-passed (6), test-state-failed (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the running test on T1/E1 line " ::= { dsxT1E1IfTestStatusEntry 3 } dsxT1E1IfTestStatusTestPattern OBJECT-TYPE SYNTAX INTEGER { pattern-all-ones (1), pattern-all-zeros (2), pattern-alternating (3), pattern-3in24 (4), pattern-1in3 (5), pattern-1in5 (6), pattern-1in7 (7), pattern-smartjack-lpup (8), pattern-smartjack-lpdown (9), pattern-user1 (10), pattern-user2 (11), pattern-29minus1 (12), pattern-215minus1 (13), pattern-220minus1 (14), pattern-qrss (15), pattern-223minus1 (16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Pattern generated to test the T1/E1, only relevent to Pattern Test. " ::= { dsxT1E1IfTestStatusEntry 4 } dsxT1E1IfTestStatusLockedSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds, during which the pattern is synchronized " ::= { dsxT1E1IfTestStatusEntry 5 } dsxT1E1IfTestStatusSyncLossCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter for the pattern synchronization losses " ::= { dsxT1E1IfTestStatusEntry 6 } dsxT1E1IfTestStatusErrorCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the Bit error during the test " ::= { dsxT1E1IfTestStatusEntry 7 } dsxT1E1IfTestStatusLoopCode OBJECT-TYPE SYNTAX INTEGER { loopcode-none (1), loopcode-line-standard (2), loopcode-line-alternate (3), loopcode-line-ATTFDL (4), loopcode-payload-ATTFDL (5), loopcode-payload-ansiFDL (6), loopcode-v54 (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The loop codes transmitted on the T1/E1 interface Only relevent to the Remote LoopUp and Remote LoopDown tests." ::= { dsxT1E1IfTestStatusEntry 8 } -- T1/E1 Last Test Result Table dsxT1E1IfLastTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfLastTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface previous test status entries" ::= { dsxT1E1IfStatusGroup 4 } dsxT1E1IfLastTestResultEntry OBJECT-TYPE SYNTAX DsxT1E1IfLastTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing previous test status entry for each T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfLastTestResultTable 1 } DsxT1E1IfLastTestResultEntry ::= SEQUENCE { dsxT1E1IfLastTestResultTestType INTEGER, dsxT1E1IfLastTestResultTestTime Unsigned32, dsxT1E1IfLastTestResultTestState INTEGER, dsxT1E1IfLastTestResultTestPattern INTEGER, dsxT1E1IfLastTestResultLockedSeconds Unsigned32, dsxT1E1IfLastTestResultSyncLossCount Unsigned32, dsxT1E1IfLastTestResultErrorCount Unsigned32, dsxT1E1IfLastTestResultLoopCode INTEGER } dsxT1E1IfLastTestResultTestType OBJECT-TYPE SYNTAX INTEGER { testtype-notest (1), testtype-payload-loopback (2), testtype-line-loopback (3), testtype-pattern (6), testtype-remote-lpup (7), testtype-remote-lpdn (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the previous test conducted on this T1/E1 interface, this field corresponds to Type of Test conducted" ::= { dsxT1E1IfLastTestResultEntry 1 } dsxT1E1IfLastTestResultTestTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of the test conducted in previous test " ::= { dsxT1E1IfLastTestResultEntry 2 } dsxT1E1IfLastTestResultTestState OBJECT-TYPE SYNTAX INTEGER { test-state-idle (1), test-state-searching (2), test-state-locked (3), test-state-relocked (4), test-state-inprogress (5), test-state-passed (6), test-state-failed (7) } MAX-ACCESS read-only STATUS current DESCRIPTION " This field shows in which state previous test was ended " ::= { dsxT1E1IfLastTestResultEntry 3 } dsxT1E1IfLastTestResultTestPattern OBJECT-TYPE SYNTAX INTEGER { pattern-all-ones (1), pattern-all-zeros (2), pattern-alternating (3), pattern-3in24 (4), pattern-1in3 (5), pattern-1in5 (6), pattern-1in7 (7), pattern-smartjack-lpup (8), pattern-smartjack-lpdown (9), pattern-user1 (10), pattern-user2 (11), pattern-29minus1 (12), pattern-215minus1 (13), pattern-220minus1 (14), pattern-qrss (15), pattern-223minus1 (16) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the previous test conducted was pattern test, This field will have type of pattern used to test. " ::= { dsxT1E1IfLastTestResultEntry 4 } dsxT1E1IfLastTestResultLockedSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration in which signal was synchronized while under test. " ::= { dsxT1E1IfLastTestResultEntry 5 } dsxT1E1IfLastTestResultSyncLossCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the pattern synchronization losses in previous test results." ::= { dsxT1E1IfLastTestResultEntry 6 } dsxT1E1IfLastTestResultErrorCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for the Bit error during the test in previous test" ::= { dsxT1E1IfLastTestResultEntry 7 } dsxT1E1IfLastTestResultLoopCode OBJECT-TYPE SYNTAX INTEGER { loopcode-none (1), loopcode-line-standard (2), loopcode-line-alternate (3), loopcode-line-ATTFDL (4), loopcode-payload-ATTFDL (5), loopcode-payload-ansiFDL (6), loopcode-v54 (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type loopcode used to put interface under remote loop back" ::= { dsxT1E1IfLastTestResultEntry 8 } -- DSX T1/E1 Stats Group Definitions -- T1/E1 ArchiveValidIntervals table -- Table to store the valid intervals of archive stats tables dsxT1E1IfArchiveStatsValidIntervalsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfArchiveStatsValidIntervalsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of intervals available in archive statistics table for this T1/E1 interface" ::= { dsxT1E1IfStatsGroup 1 } dsxT1E1IfArchiveStatsValidIntervalsEntry OBJECT-TYPE SYNTAX DsxT1E1IfArchiveStatsValidIntervalsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing statistics entry for each T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfArchiveStatsValidIntervalsTable 1 } DsxT1E1IfArchiveStatsValidIntervalsEntry ::= SEQUENCE { dsxT1E1IfAnsiArchiveStatsValidIntervals Unsigned32, dsxT1E1IfAttArchiveStatsValidIntervals Unsigned32, dsxT1E1IfIetfArchiveStatsValidIntervals Unsigned32, dsxT1E1IfUserTotalStatsValidDays Unsigned32, dsxT1E1IfUserArchiveStatsValidIntervals INTEGER } dsxT1E1IfAnsiArchiveStatsValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of archived statistics collected according to ANSI standards." ::= { dsxT1E1IfArchiveStatsValidIntervalsEntry 1 } dsxT1E1IfAttArchiveStatsValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of archived statistics collected according to ATT standards." ::= { dsxT1E1IfArchiveStatsValidIntervalsEntry 2 } dsxT1E1IfIetfArchiveStatsValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total number of archived statistics collected according to IETF standards." ::= { dsxT1E1IfArchiveStatsValidIntervalsEntry 3 } dsxT1E1IfUserTotalStatsValidDays OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of days archived statistics collected according to User definations." ::= { dsxT1E1IfArchiveStatsValidIntervalsEntry 4 } dsxT1E1IfUserArchiveStatsValidIntervals OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " User Archive Stats Valid Interval. Setting this variable to 0 will clear all the User Statistics Tables " ::= { dsxT1E1IfArchiveStatsValidIntervalsEntry 5 } -- DSX T1/E1 Stats Group Definitions dsxT1E1IfAnsiStatsGroup OBJECT IDENTIFIER ::= { dsxT1E1IfStatsGroup 2 } dsxT1E1IfAttStatsGroup OBJECT IDENTIFIER ::= { dsxT1E1IfStatsGroup 3 } dsxT1E1IfIetfStatsGroup OBJECT IDENTIFIER ::= { dsxT1E1IfStatsGroup 4 } dsxT1E1IfUserStatsGroup OBJECT IDENTIFIER ::= { dsxT1E1IfStatsGroup 5 } -- DSX T1/E1 ANSI Stats Group definitions -- ANSI Current Stats table dsxT1E1IfAnsiCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAnsiCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics collected according ANSI standards and collected in current 900 secondss period." ::= { dsxT1E1IfAnsiStatsGroup 1 } dsxT1E1IfAnsiCurrentStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAnsiCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics collected in current 900 secs ( i.e. 15 mins) kept in this table" AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfAnsiCurrentStatsTable 1 } DsxT1E1IfAnsiCurrentStatsEntry ::= SEQUENCE { dsxT1E1IfAnsiCurrentStatsUASState TruthValue, dsxT1E1IfAnsiCurrentStatsTimeInCurrent Unsigned32, dsxT1E1IfAnsiCurrentPathStatsCV Unsigned32, dsxT1E1IfAnsiCurrentPathStatsES Unsigned32, dsxT1E1IfAnsiCurrentPathStatsSES Unsigned32, dsxT1E1IfAnsiCurrentPathStatsSAS Unsigned32, dsxT1E1IfAnsiCurrentPathStatsCSS Unsigned32, dsxT1E1IfAnsiCurrentPathStatsUAS Unsigned32, dsxT1E1IfAnsiCurrentLineStatsCV Unsigned32, dsxT1E1IfAnsiCurrentLineStatsES Unsigned32, dsxT1E1IfAnsiCurrentLineStatsSES Unsigned32 } dsxT1E1IfAnsiCurrentStatsUASState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The State of T1/E1 line according to ANSI standards" ::= { dsxT1E1IfAnsiCurrentStatsEntry 1 } dsxT1E1IfAnsiCurrentStatsTimeInCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error measurement period" ::= { dsxT1E1IfAnsiCurrentStatsEntry 2 } dsxT1E1IfAnsiCurrentPathStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations encoun- tered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 3 } dsxT1E1IfAnsiCurrentPathStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a T1/E1 interface in the current 15 minute inter- val. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 4 } dsxT1E1IfAnsiCurrentPathStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 5 } dsxT1E1IfAnsiCurrentPathStatsSAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds with Severe Alarms" ::= { dsxT1E1IfAnsiCurrentStatsEntry 6 } dsxT1E1IfAnsiCurrentPathStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 7 } dsxT1E1IfAnsiCurrentPathStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface in the current 15 minute in- terval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 8 } dsxT1E1IfAnsiCurrentLineStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations encoun- tered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 9 } dsxT1E1IfAnsiCurrentLineStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a T1/E1 interface in the current 15 minute inter- val. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 10 } dsxT1E1IfAnsiCurrentLineStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAnsiCurrentStatsEntry 11 } -- ANSI Total Path stats table dsxT1E1IfAnsiTotalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAnsiTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for the Total Statistics over past 24 hrs" ::= { dsxT1E1IfAnsiStatsGroup 2 } dsxT1E1IfAnsiTotalStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAnsiTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for the Total Statistics over past 24 hrs" AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfAnsiTotalStatsTable 1 } DsxT1E1IfAnsiTotalStatsEntry ::= SEQUENCE { dsxT1E1IfAnsiTotalPathStatsCV Unsigned32, dsxT1E1IfAnsiTotalPathStatsES Unsigned32, dsxT1E1IfAnsiTotalPathStatsSES Unsigned32, dsxT1E1IfAnsiTotalPathStatsSAS Unsigned32, dsxT1E1IfAnsiTotalPathStatsCSS Unsigned32, dsxT1E1IfAnsiTotalPathStatsUAS Unsigned32, dsxT1E1IfAnsiTotalLineStatsCV Unsigned32, dsxT1E1IfAnsiTotalLineStatsES Unsigned32, dsxT1E1IfAnsiTotalLineStatsSES Unsigned32 } dsxT1E1IfAnsiTotalPathStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations encoun- tered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 1 } dsxT1E1IfAnsiTotalPathStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encountered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 2 } dsxT1E1IfAnsiTotalPathStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 3 } dsxT1E1IfAnsiTotalPathStatsSAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total No seconds with Severe Alarms in past 24 hrs" ::= { dsxT1E1IfAnsiTotalStatsEntry 4 } dsxT1E1IfAnsiTotalPathStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 5 } dsxT1E1IfAnsiTotalPathStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface in the previous 24 hour in- terval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 6 } dsxT1E1IfAnsiTotalLineStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations encoun- tered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 7 } dsxT1E1IfAnsiTotalLineStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encountered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 8 } dsxT1E1IfAnsiTotalLineStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. " ::= { dsxT1E1IfAnsiTotalStatsEntry 9 } -- ANSI ARCHIVE INTERVAL STATISTICS TABLE dsxT1E1IfAnsiArchiveIntervalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAnsiArchiveIntervalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfAnsiStatsGroup 3 } dsxT1E1IfAnsiArchiveIntervalStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAnsiArchiveIntervalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." INDEX { dsxT1E1IfIndex, dsxT1E1IfAnsiArchiveStatsInterval } ::= { dsxT1E1IfAnsiArchiveIntervalStatsTable 1 } DsxT1E1IfAnsiArchiveIntervalStatsEntry ::= SEQUENCE { dsxT1E1IfAnsiArchiveStatsInterval Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsCV Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsES Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsSES Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsSAS Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsCSS Unsigned32, dsxT1E1IfAnsiArchiveIntervalPathStatsUAS Unsigned32, dsxT1E1IfAnsiArchiveIntervalLineStatsCV Unsigned32, dsxT1E1IfAnsiArchiveIntervalLineStatsES Unsigned32, dsxT1E1IfAnsiArchiveIntervalLineStatsSES Unsigned32 } dsxT1E1IfAnsiArchiveStatsInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of Intervals available in archive table " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 1 } dsxT1E1IfAnsiArchiveIntervalPathStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Path Coding Violations encoun- tered by a T1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 2 } dsxT1E1IfAnsiArchiveIntervalPathStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a DS3 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 3 } dsxT1E1IfAnsiArchiveIntervalPathStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the archive intervals . " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 4 } dsxT1E1IfAnsiArchiveIntervalPathStatsSAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Framing Seconds encountered by a T1/E1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 5 } dsxT1E1IfAnsiArchiveIntervalPathStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a T1/E1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 6 } dsxT1E1IfAnsiArchiveIntervalPathStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 7 } dsxT1E1IfAnsiArchiveIntervalLineStatsCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Coding Violations encoun- tered by a T1/E1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 8 } dsxT1E1IfAnsiArchiveIntervalLineStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a T1/E1 interface in the archive intervals. " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 9 } dsxT1E1IfAnsiArchiveIntervalLineStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the archive intervals . " ::= { dsxT1E1IfAnsiArchiveIntervalStatsEntry 10 } -- ATT Stats Group -- ATT Stats Current Table dsxT1E1IfAttCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAttCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface statistics for current interval" ::= { dsxT1E1IfAttStatsGroup 1 } dsxT1E1IfAttCurrentStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAttCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing statistics for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfAttCurrentStatsTable 1 } DsxT1E1IfAttCurrentStatsEntry ::= SEQUENCE { dsxT1E1IfAttCurrentStatsUASState TruthValue, dsxT1E1IfAttCurrentStatsTimeInCurrent Unsigned32, dsxT1E1IfAttCurrentStatsEEV Unsigned32, dsxT1E1IfAttCurrentStatsES Unsigned32, dsxT1E1IfAttCurrentStatsUAS Unsigned32, dsxT1E1IfAttCurrentStatsBES Unsigned32, dsxT1E1IfAttCurrentStatsSES Unsigned32, dsxT1E1IfAttCurrentStatsLOFC Unsigned32, dsxT1E1IfAttCurrentStatsCSS Unsigned32 } dsxT1E1IfAttCurrentStatsUASState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The Current state of availablity of T1/E1 interface" ::= { dsxT1E1IfAttCurrentStatsEntry 1 } dsxT1E1IfAttCurrentStatsTimeInCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the far end current error-measurement period. " ::= { dsxT1E1IfAttCurrentStatsEntry 2 } dsxT1E1IfAttCurrentStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far Far End Errored EVents en- countered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 3 } dsxT1E1IfAttCurrentStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far Far End Errored Seconds en- countered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 4 } dsxT1E1IfAttCurrentStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface in the current 15 minute in- terval. " ::= { dsxT1E1IfAttCurrentStatsEntry 5 } dsxT1E1IfAttCurrentStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 6 } dsxT1E1IfAttCurrentStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Seconds encountered by a T1/E1 interface in the current 15 minute interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 7 } dsxT1E1IfAttCurrentStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loss of frames occurred in the current 15 minute interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 8 } dsxT1E1IfAttCurrentStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Controlled Slip Seconds encountered by a T1/E1 interface in the current interval. " ::= { dsxT1E1IfAttCurrentStatsEntry 9 } -- ATT TOTAL STATS dsxT1E1IfAttTotalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAttTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfAttStatsGroup 2 } dsxT1E1IfAttTotalStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAttTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfAttTotalStatsTable 1 } DsxT1E1IfAttTotalStatsEntry ::= SEQUENCE { dsxT1E1IfAttTotalStatsEEV Unsigned32, dsxT1E1IfAttTotalStatsES Unsigned32, dsxT1E1IfAttTotalStatsUAS Unsigned32, dsxT1E1IfAttTotalStatsBES Unsigned32, dsxT1E1IfAttTotalStatsSES Unsigned32, dsxT1E1IfAttTotalStatsLOFC Unsigned32, dsxT1E1IfAttTotalStatsCSS Unsigned32 } dsxT1E1IfAttTotalStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfAttTotalStatsEntry 1 } dsxT1E1IfAttTotalStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfAttTotalStatsEntry 2 } dsxT1E1IfAttTotalStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttTotalStatsEntry 3 } dsxT1E1IfAttTotalStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttTotalStatsEntry 4 } dsxT1E1IfAttTotalStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttTotalStatsEntry 5 } dsxT1E1IfAttTotalStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfAttTotalStatsEntry 6 } dsxT1E1IfAttTotalStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttTotalStatsEntry 7 } -- ATT ARCHIVE STATS dsxT1E1IfAttArchiveStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfAttArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfAttStatsGroup 3 } dsxT1E1IfAttArchiveStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfAttArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." INDEX { dsxT1E1IfIndex, dsxT1E1IfAttArchiveInterval } ::= { dsxT1E1IfAttArchiveStatsTable 1 } DsxT1E1IfAttArchiveStatsEntry ::= SEQUENCE { dsxT1E1IfAttArchiveInterval Unsigned32, dsxT1E1IfAttArchiveStatsEEV Unsigned32, dsxT1E1IfAttArchiveStatsES Unsigned32, dsxT1E1IfAttArchiveStatsUAS Unsigned32, dsxT1E1IfAttArchiveStatsBES Unsigned32, dsxT1E1IfAttArchiveStatsSES Unsigned32, dsxT1E1IfAttArchiveStatsLOFC Unsigned32, dsxT1E1IfAttArchiveStatsCSS Unsigned32 } dsxT1E1IfAttArchiveInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time interval for archiving the statistics. " ::= { dsxT1E1IfAttArchiveStatsEntry 1 } dsxT1E1IfAttArchiveStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfAttArchiveStatsEntry 2 } dsxT1E1IfAttArchiveStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfAttArchiveStatsEntry 3 } dsxT1E1IfAttArchiveStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttArchiveStatsEntry 4 } dsxT1E1IfAttArchiveStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttArchiveStatsEntry 5 } dsxT1E1IfAttArchiveStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttArchiveStatsEntry 6 } dsxT1E1IfAttArchiveStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfAttArchiveStatsEntry 7 } dsxT1E1IfAttArchiveStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Near End Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfAttArchiveStatsEntry 8 } -- IETF Stats Group -- IETF Current Stats Table dsxT1E1IfIetfCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfIetfCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfIetfStatsGroup 1 } dsxT1E1IfIetfCurrentStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfIetfCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfIetfCurrentStatsTable 1 } DsxT1E1IfIetfCurrentStatsEntry ::= SEQUENCE { dsxT1E1IfIetfCurrentStatsUASState TruthValue, dsxT1E1IfIetfCurrentStatsTimeInCurrent Unsigned32, dsxT1E1IfIetfCurrentStatsES Unsigned32, dsxT1E1IfIetfCurrentStatsSES Unsigned32, dsxT1E1IfIetfCurrentStatsSEFS Unsigned32, dsxT1E1IfIetfCurrentStatsUAS Unsigned32, dsxT1E1IfIetfCurrentStatsCSS Unsigned32, dsxT1E1IfIetfCurrentStatsPCV Unsigned32, dsxT1E1IfIetfCurrentStatsLES Unsigned32, dsxT1E1IfIetfCurrentStatsBES Unsigned32, dsxT1E1IfIetfCurrentStatsDM Unsigned32, dsxT1E1IfIetfCurrentStatsLCV Unsigned32 } dsxT1E1IfIetfCurrentStatsUASState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. " ::= { dsxT1E1IfIetfCurrentStatsEntry 1 } dsxT1E1IfIetfCurrentStatsTimeInCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. " ::= { dsxT1E1IfIetfCurrentStatsEntry 2 } dsxT1E1IfIetfCurrentStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 3 } dsxT1E1IfIetfCurrentStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Far End Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 4 } dsxT1E1IfIetfCurrentStatsSEFS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 5 } dsxT1E1IfIetfCurrentStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 6 } dsxT1E1IfIetfCurrentStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 7 } dsxT1E1IfIetfCurrentStatsPCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 8 } dsxT1E1IfIetfCurrentStatsLES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 9 } dsxT1E1IfIetfCurrentStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 10 } dsxT1E1IfIetfCurrentStatsDM OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfCurrentStatsEntry 11 } dsxT1E1IfIetfCurrentStatsLCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfIetfCurrentStatsEntry 12 } -- IETF Total Stats Table dsxT1E1IfIetfTotalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfIetfTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfIetfStatsGroup 2 } dsxT1E1IfIetfTotalStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfIetfTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfIetfTotalStatsTable 1 } DsxT1E1IfIetfTotalStatsEntry ::= SEQUENCE { dsxT1E1IfIetfTotalStatsES Unsigned32, dsxT1E1IfIetfTotalStatsSES Unsigned32, dsxT1E1IfIetfTotalStatsSEFS Unsigned32, dsxT1E1IfIetfTotalStatsUAS Unsigned32, dsxT1E1IfIetfTotalStatsCSS Unsigned32, dsxT1E1IfIetfTotalStatsPCV Unsigned32, dsxT1E1IfIetfTotalStatsLES Unsigned32, dsxT1E1IfIetfTotalStatsBES Unsigned32, dsxT1E1IfIetfTotalStatsDM Unsigned32, dsxT1E1IfIetfTotalStatsLCV Unsigned32 } dsxT1E1IfIetfTotalStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 1 } dsxT1E1IfIetfTotalStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 2 } dsxT1E1IfIetfTotalStatsSEFS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 3 } dsxT1E1IfIetfTotalStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 4 } dsxT1E1IfIetfTotalStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 5 } dsxT1E1IfIetfTotalStatsPCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 6 } dsxT1E1IfIetfTotalStatsLES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 7 } dsxT1E1IfIetfTotalStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 8 } dsxT1E1IfIetfTotalStatsDM OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfTotalStatsEntry 9 } dsxT1E1IfIetfTotalStatsLCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfIetfTotalStatsEntry 10 } -- IETF Archive Stats dsxT1E1IfIetfArchiveStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfIetfArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfIetfStatsGroup 3 } dsxT1E1IfIetfArchiveStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfIetfArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." INDEX { dsxT1E1IfIndex, dsxT1E1IfIetfArchiveStatsInterval } ::= { dsxT1E1IfIetfArchiveStatsTable 1 } DsxT1E1IfIetfArchiveStatsEntry ::= SEQUENCE { dsxT1E1IfIetfArchiveStatsInterval Unsigned32, dsxT1E1IfIetfArchiveStatsES Unsigned32, dsxT1E1IfIetfArchiveStatsSES Unsigned32, dsxT1E1IfIetfArchiveStatsSEFS Unsigned32, dsxT1E1IfIetfArchiveStatsUAS Unsigned32, dsxT1E1IfIetfArchiveStatsCSS Unsigned32, dsxT1E1IfIetfArchiveStatsPCV Unsigned32, dsxT1E1IfIetfArchiveStatsLES Unsigned32, dsxT1E1IfIetfArchiveStatsBES Unsigned32, dsxT1E1IfIetfArchiveStatsDM Unsigned32, dsxT1E1IfIetfArchiveStatsLCV Unsigned32 } dsxT1E1IfIetfArchiveStatsInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. " ::= { dsxT1E1IfIetfArchiveStatsEntry 1 } dsxT1E1IfIetfArchiveStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 2 } dsxT1E1IfIetfArchiveStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 3 } dsxT1E1IfIetfArchiveStatsSEFS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 4 } dsxT1E1IfIetfArchiveStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 5 } dsxT1E1IfIetfArchiveStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 6 } dsxT1E1IfIetfArchiveStatsPCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 7 } dsxT1E1IfIetfArchiveStatsLES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 8 } dsxT1E1IfIetfArchiveStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 9 } dsxT1E1IfIetfArchiveStatsDM OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfIetfArchiveStatsEntry 10 } dsxT1E1IfIetfArchiveStatsLCV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfIetfArchiveStatsEntry 11 } -- User Stats Group -- USER Current Stats Table dsxT1E1IfUserCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfUserCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfUserStatsGroup 1 } dsxT1E1IfUserCurrentStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfUserCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfUserCurrentStatsTable 1 } DsxT1E1IfUserCurrentStatsEntry ::= SEQUENCE { dsxT1E1IfUserCurrentStatsUASState TruthValue, dsxT1E1IfUserCurrentStatsTimeInCurrent Unsigned32, dsxT1E1IfUserCurrentStatsEEV Unsigned32, dsxT1E1IfUserCurrentStatsES Unsigned32, dsxT1E1IfUserCurrentStatsUAS Unsigned32, dsxT1E1IfUserCurrentStatsBES Unsigned32, dsxT1E1IfUserCurrentStatsSES Unsigned32, dsxT1E1IfUserCurrentStatsLOFC Unsigned32, dsxT1E1IfUserCurrentStatsCSS Unsigned32, dsxT1E1IfUserCurrentStatsBPV Unsigned32, dsxT1E1IfUserCurrentStatsOOF Unsigned32, dsxT1E1IfUserCurrentStatsCRC Unsigned32 } dsxT1E1IfUserCurrentStatsUASState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of availablity of T1/E1 interface" ::= { dsxT1E1IfUserCurrentStatsEntry 1 } dsxT1E1IfUserCurrentStatsTimeInCurrent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. " ::= { dsxT1E1IfUserCurrentStatsEntry 2 } dsxT1E1IfUserCurrentStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfUserCurrentStatsEntry 3 } dsxT1E1IfUserCurrentStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 4 } dsxT1E1IfUserCurrentStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 5 } dsxT1E1IfUserCurrentStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 6 } dsxT1E1IfUserCurrentStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 7 } dsxT1E1IfUserCurrentStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfUserCurrentStatsEntry 8 } dsxT1E1IfUserCurrentStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 9 } dsxT1E1IfUserCurrentStatsBPV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Error Event occurred for this interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 10 } dsxT1E1IfUserCurrentStatsOOF OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 11 } dsxT1E1IfUserCurrentStatsCRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CRC Defects that occurred for this interface. " ::= { dsxT1E1IfUserCurrentStatsEntry 12 } -- USER Total Stats Table dsxT1E1IfUserTotalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfUserTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of T1/E1 interface test status entries" ::= { dsxT1E1IfUserStatsGroup 2 } dsxT1E1IfUserTotalStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfUserTotalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." INDEX { dsxT1E1IfIndex, dsxT1E1IfUserTotalStatsDay } ::= { dsxT1E1IfUserTotalStatsTable 1 } DsxT1E1IfUserTotalStatsEntry ::= SEQUENCE { dsxT1E1IfUserTotalStatsDay Unsigned32, dsxT1E1IfUserTotalStatsEEV Unsigned32, dsxT1E1IfUserTotalStatsES Unsigned32, dsxT1E1IfUserTotalStatsUAS Unsigned32, dsxT1E1IfUserTotalStatsBES Unsigned32, dsxT1E1IfUserTotalStatsSES Unsigned32, dsxT1E1IfUserTotalStatsLOFC Unsigned32, dsxT1E1IfUserTotalStatsCSS Unsigned32, dsxT1E1IfUserTotalStatsBPV Unsigned32, dsxT1E1IfUserTotalStatsOOF Unsigned32, dsxT1E1IfUserTotalStatsCRC Unsigned32 } dsxT1E1IfUserTotalStatsDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Total number of days elapsed since event recording started for this interface. " ::= { dsxT1E1IfUserTotalStatsEntry 1 } dsxT1E1IfUserTotalStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invoke the configured test. " ::= { dsxT1E1IfUserTotalStatsEntry 2 } dsxT1E1IfUserTotalStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfUserTotalStatsEntry 3 } dsxT1E1IfUserTotalStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserTotalStatsEntry 4 } dsxT1E1IfUserTotalStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserTotalStatsEntry 5 } dsxT1E1IfUserTotalStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserTotalStatsEntry 6 } dsxT1E1IfUserTotalStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfUserTotalStatsEntry 7 } dsxT1E1IfUserTotalStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserTotalStatsEntry 8 } dsxT1E1IfUserTotalStatsBPV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Error Event occurred for this interface. " ::= { dsxT1E1IfUserTotalStatsEntry 9 } dsxT1E1IfUserTotalStatsOOF OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserTotalStatsEntry 10 } dsxT1E1IfUserTotalStatsCRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserTotalStatsEntry 11 } -- User Lifetime Stats Table dsxT1E1IfUserLifetimeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfUserLifetimeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table maintained to keep the statistics for the whole lifetime of the system since it is first powered on." ::= { dsxT1E1IfUserStatsGroup 3 } dsxT1E1IfUserLifetimeStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfUserLifetimeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." AUGMENTS { dsxT1E1IfConfigLineEntry } ::= { dsxT1E1IfUserLifetimeStatsTable 1 } DsxT1E1IfUserLifetimeStatsEntry ::= SEQUENCE { dsxT1E1IfUserLifetimeStatsEEV Unsigned32, dsxT1E1IfUserLifetimeStatsES Unsigned32, dsxT1E1IfUserLifetimeStatsUAS Unsigned32, dsxT1E1IfUserLifetimeStatsBES Unsigned32, dsxT1E1IfUserLifetimeStatsSES Unsigned32, dsxT1E1IfUserLifetimeStatsLOFC Unsigned32, dsxT1E1IfUserLifetimeStatsCSS Unsigned32, dsxT1E1IfUserLifetimeStatsBPV Unsigned32, dsxT1E1IfUserLifetimeStatsOOF Unsigned32, dsxT1E1IfUserLifetimeStatsCRC Unsigned32 } dsxT1E1IfUserLifetimeStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of Error Events occured during since the system brought up" ::= { dsxT1E1IfUserLifetimeStatsEntry 1 } dsxT1E1IfUserLifetimeStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 2 } dsxT1E1IfUserLifetimeStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 3 } dsxT1E1IfUserLifetimeStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 4 } dsxT1E1IfUserLifetimeStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 5 } dsxT1E1IfUserLifetimeStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfUserLifetimeStatsEntry 6 } dsxT1E1IfUserLifetimeStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 7} dsxT1E1IfUserLifetimeStatsBPV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Error Event occurred for this interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 8 } dsxT1E1IfUserLifetimeStatsOOF OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 9 } dsxT1E1IfUserLifetimeStatsCRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserLifetimeStatsEntry 10 } -- USER Archive Stats dsxT1E1IfUserArchiveStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DsxT1E1IfUserArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table maintained to keep last 24 hrs statistics in " ::= { dsxT1E1IfUserStatsGroup 4 } dsxT1E1IfUserArchiveStatsEntry OBJECT-TYPE SYNTAX DsxT1E1IfUserArchiveStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing status entry for each currently active T1/E1 interface." INDEX { dsxT1E1IfIndex, dsxT1E1IfUserArchiveStatsInterval } ::= { dsxT1E1IfUserArchiveStatsTable 1 } DsxT1E1IfUserArchiveStatsEntry ::= SEQUENCE { dsxT1E1IfUserArchiveStatsInterval Unsigned32, dsxT1E1IfUserArchiveStatsEEV Unsigned32, dsxT1E1IfUserArchiveStatsES Unsigned32, dsxT1E1IfUserArchiveStatsUAS Unsigned32, dsxT1E1IfUserArchiveStatsBES Unsigned32, dsxT1E1IfUserArchiveStatsSES Unsigned32, dsxT1E1IfUserArchiveStatsLOFC Unsigned32, dsxT1E1IfUserArchiveStatsCSS Unsigned32, dsxT1E1IfUserArchiveStatsBPV Unsigned32, dsxT1E1IfUserArchiveStatsOOF Unsigned32, dsxT1E1IfUserArchiveStatsCRC Unsigned32 } dsxT1E1IfUserArchiveStatsInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. " ::= { dsxT1E1IfUserArchiveStatsEntry 1 } dsxT1E1IfUserArchiveStatsEEV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error Events collected over each period of 15 mins" ::= { dsxT1E1IfUserArchiveStatsEntry 2 } dsxT1E1IfUserArchiveStatsES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encoun- tered by a T1/E1 interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 3 } dsxT1E1IfUserArchiveStatsUAS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 4 } dsxT1E1IfUserArchiveStatsBES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 5 } dsxT1E1IfUserArchiveStatsSES OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 6 } dsxT1E1IfUserArchiveStatsLOFC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of loss of frames. " ::= { dsxT1E1IfUserArchiveStatsEntry 7 } dsxT1E1IfUserArchiveStatsCSS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds encountered by a T1/E1 interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 8 } dsxT1E1IfUserArchiveStatsBPV OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Error Event occurred for this interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 9 } dsxT1E1IfUserArchiveStatsOOF OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 10 } dsxT1E1IfUserArchiveStatsCRC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Defect occurred for this interface. " ::= { dsxT1E1IfUserArchiveStatsEntry 11 } -- TRAP definitions for the T1E1 Interfaces -- -- dsxT1E1Number OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " This is the T1/E1 number of the interface from where this alarm is originating." ::= { dsxT1E1TrapVariables 1} dsxT1E1Type OBJECT-TYPE SYNTAX INTEGER { type-t1(1), type-t1-within-ct3(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " This variable indicates whether this T1/E1 interface is with in a T3/E3 or by itself." ::= { dsxT1E1TrapVariables 2} dsxT1E1T3Number OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " This variable is applicable only if dsxT1E1Type is 'type_t1_within_ct3' and it indicates the T3/E3 interface number this T1 belongs to." ::= { dsxT1E1TrapVariables 3} dsxT1E1AlarmType OBJECT-TYPE SYNTAX INTEGER { te1-alarm-rais (1), te1-alarm-rrai (2), te1-alarm-roof (3), te1-alarm-rlos (4), te1-alarm-rlof (5), te1-alarm-rexz (6), te1-alarm-rfbe (7), te1-alarm-lorc (8), te1-alarm-tpde (9), te1-alarm-tais (10), te1-alarm-tblu (11), te1-alarm-trai (12), te1-alarm-threshold1 (13), te1-alarm-threshold2 (14), te1-alarm-threshold3 (15), te1-alarm-threshold4 (16), te1-alarm-threshold5 (17), te1-alarm-threshold6 (18), te1-alarm-threshold7 (19), te1-alarm-threshold8 (20), te1-alarm-threshold9 (21), te1-alarm-threshold10 (22) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of alarms for the T1/E1 interface RRAI - Recieve RAI (Recieve Alarm Indication), RLOS - Recieve Loss Of Sync, REXZ - Recieve Excessive Zeros, LORC - Loss Of Receive Clock (LORC), TPDE - transmit pulse density, TAIS - Transmit Alarm Indication Signal, RAIS - Recieve Alarm Indication Signal, RLOF - Recieve Loss Of Frame. RFBE - Recieve Frame Bit Error, ROOF - Recieve Out Of Frame, TRAI - Transmit RAI (Recieve Alarm Indication), Threshold 1-10 : TRUE if it is configured. " ::= { dsxT1E1TrapVariables 4} dsxT1E1AlarmOnTrap TRAP-TYPE ENTERPRISE dsxT1E1Traps VARIABLES { dsxT1E1IfIndex, dsxT1E1Number, dsxT1E1Type, dsxT1E1T3Number, dsxT1E1AlarmType } DESCRIPTION "T1/E1 interface alarm traps for the Alarm On state." --#TYPE "T1/E1 Alarm On state" --#SUMMARY "T1/E1 Alarm On trap sent from Interface index: %s T1/E1 number: %s with T1/E1 type: %s T1/E1 T3 number: %s and Alarm type: %s" --#ARGUMENTS {0,1,2,3,4} --#SEVERITY MAJOR ::= 1 dsxT1E1AlarmOffTrap TRAP-TYPE ENTERPRISE dsxT1E1Traps VARIABLES { dsxT1E1IfIndex, dsxT1E1Number, dsxT1E1Type, dsxT1E1T3Number, dsxT1E1AlarmType } DESCRIPTION "T1/E1 interface alarm trap for the Alarm Off state." --#TYPE "T1/E1 Alarm Off state" --#SUMMARY "T1/E1 Alarm Off trap sent from Interface index: %s T1/E1 number: %s with T1/E1 type: %s T1/E1 T3 number: %s and Alarm type: %s" --#ARGUMENTS {0,1,2,3,4} --#SEVERITY NORMAL ::= 2 END