-- SAGEM SA -- 11, 13 rue Watt -- 75013 PARIS -- FRANCE -- -- phone 01 55 75 75 75 -- fax 01 55 75 31 13 -- -- Introduction -- -- This document defines the SNMP Management Information Base (MIB) -- variables that are implemented in the MegaPAC suite of "Switch-Router" -- software products, manufactured by Sat. This MIB* -- includes all Gateway Emulation, Terminal Emulation, Bridge / Router, -- Protocol Translator and serial / packet Switching functions. -- The document relies upon the Structure of Management Information -- (SMI), RFC1155. It is presented in a format described in RFC1212, -- the Concise MIB document. -- -- MIB Version ................... 25 (Fevrier , 1999) -- SAT-MEGA-MIB --{ iso org(3) dod(6) internet(1) private(4) enterprises(1) 1038 4 } DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM SNMPv2-TC OBJECT-TYPE, Counter, enterprises FROM RFC1155-SMI TRAP-TYPE FROM RFC-1215; sat OBJECT IDENTIFIER ::= { enterprises 1038 } mega OBJECT IDENTIFIER ::= { sat 4 } products OBJECT IDENTIFIER ::= { mega 1 } base OBJECT IDENTIFIER ::= { mega 2 } controller OBJECT IDENTIFIER ::= { mega 3 } channel OBJECT IDENTIFIER ::= { mega 4 } x25File OBJECT IDENTIFIER ::= { mega 5 } nameFile OBJECT IDENTIFIER ::= { mega 6 } passFile OBJECT IDENTIFIER ::= { mega 7 } macFile OBJECT IDENTIFIER ::= { mega 8 } ilanFile OBJECT IDENTIFIER ::= { mega 9 } elogFile OBJECT IDENTIFIER ::= { mega 10 } billFile OBJECT IDENTIFIER ::= { mega 11 } -- The Products Group -- The product group defined below identifies each model of MegaPAC -- processor. Each model has a unique object identifier allocated -- from this section which is referenced by the sysObjectID variable -- from RFC1156. New products will be added at the end of this list. megaPAC-E-cpu-C OBJECT IDENTIFIER ::= { products 1 } megaPAC-ESL OBJECT IDENTIFIER ::= { products 2 } megaPAC-E-cpu-D-E OBJECT IDENTIFIER ::= { products 3 } megaPAC-V-cpu-8 OBJECT IDENTIFIER ::= { products 4 } megaPAC-V-cpu-16 OBJECT IDENTIFIER ::= { products 5 } megaPAC-V-cpu-68040 OBJECT IDENTIFIER ::= { products 6 } megaPAC-V-cpu-68060 OBJECT IDENTIFIER ::= { products 7 } -- The BASE Group -- The BASE Group describes the global attributes of the MegaPAC. baseVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "Software Version. The software version currently running. Defined as YMMR (i.e. Year, Month, Revision" ::= { base 1 } baseRestartTime OBJECT-TYPE SYNTAX DisplayString (SIZE (20)) ACCESS read-only STATUS mandatory DESCRIPTION "BASE Restart Time. The time and data of the last system restart (i.e. power-on or last BOOT)" ::= { base 2 } baseMaxPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Maximum Packet Size. The maximum single buffer size available on the MegaPAC." ::= { base 3 } baseBuffPoolMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Buffer Pool Maximum. The maximum number of buffers available temporary storage of transitting data." ::= { base 4 } baseBuffPoolNow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Current Buffer Pool. The current number of free buffers available temporary storage of transitting data." ::= { base 5 } baseBufferPoolLowest OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Buffer Pool Lowest. The lowest value the buffer pool has ever reached." ::= { base 6 } baseBufferPoolEmpty OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Buffer Pool Empty. The number of times that the free buffer pool has fallen below the minimum buffer threshold 'baseBuffThreshold'." ::= { base 7 } baseStatBufferThreshold OBJECT-TYPE SYNTAX INTEGER (5..1000) ACCESS read-only STATUS mandatory DESCRIPTION "Node Buffer Threshold. When the number of buffers in the free buffer pool reaches this threshold, flow control will occur." ::= { base 8 } baseMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Memory Size. The size of the system memory installed in the MegaPAC." ::= { base 9 } baseDataFramesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Frames In. The total number of frames received by the MegaPAC." ::= { base 10 } baseDataFramesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Frames Out. The total number of frames transmitted by the MegaPAC." ::= { base 11 } baseDataFrameRateIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Frame Rate In. The rate measured in frames per second that the MegaPAC is currently receiving frames." ::= { base 12 } baseDataFrameRateOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Frames Rate Out. The rate measured in frames per second that the MegaPAC is currently transmitting frames." ::= { base 13 } baseTotalCallSetUps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Total Call Set ups. The total number of calls successfully established by the MegaPAC." ::= { base 14 } baseCurrentCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Current calls. The number of calls currently active on the MegaPAC." ::= { base 15 } baseRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Retransmissions. The total number of frames which have been retransmitted by the MegaPAC." ::= { base 16 } baseRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Rejects. The total number of frames that have been rejected by the MegaPAC." ::= { base 17 } baseTotalTransportCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Node Total Transport calls. The total number of transport calls established by the MegaPAC." ::= { base 18 } baseCurrentTransportCalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Current Transport Calls. The number of transport calls currently active on the MegaPAC." ::= { base 19 } baseRunStatus OBJECT-TYPE SYNTAX INTEGER { prom(1), ram(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Node Run Status. This parameter indicates whether the operating system has been 'Booted' from RAM (TELELOAD) or EPROM (default)." ::= { base 20 } baseReports OBJECT-TYPE SYNTAX DisplayString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Node Reporting channel. The name of the logical resource (channel) that the system reports will be directed to." ::= { base 21 } baseSessionStatistics OBJECT-TYPE SYNTAX DisplayString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "Node Session Statistics reporting channel. The name of the logical resource (channel) that the system session statistics will be directed to." ::= { base 22 } baseBufferThreshold OBJECT-TYPE SYNTAX INTEGER (5..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Node Buffer Threshold. The threshold before flow control is invoked" ::= { base 23 } baseInitialPresentationTimer OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Node Initial Presentation Timer. The maximum time allowed between initial connection to the presentation service and the user entering a valid resource. The call will be disconnected if this timer elapses." ::= { base 24 } baseSecondaryPresentationTimer OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation service to establish another call, failure to do so within this time period will result in the initial call being cleared." ::= { base 25 } baseInactivityDetectTimer OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "Node Inactivity Timer. This timer will cause calls to be cleared if the IDLE option has been configured on the channel." ::= { base 26 } baseSegmentAccounting OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Node Segment Accounting. This parameter causes the frames in/out parameters to be displayed in terms of 64 byte SEGMENTS rather than frames." ::= { base 27 } baseTerminalEmulationBuffers OBJECT-TYPE SYNTAX INTEGER (0..640) ACCESS read-write STATUS mandatory DESCRIPTION "Terminal Emulation Buffers. The number of system buffers allocated for Terminal Emulation purposes." ::= { base 28 } baseTransportBuffers OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "Transport Buffers. The number of transport buffers allocated for TP 0,2,3,4 sessions." ::= { base 29 } baseCountrySettings OBJECT-TYPE SYNTAX INTEGER { none(1), japn(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Country Setting. Invokes the ASCII representation of the Japanese character set." ::= { base 30 } baseTeleloadEnabled OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), k256(3), k160(129) } ACCESS read-write STATUS mandatory DESCRIPTION "Teleload enable. If set to yes the MegaPAC software may be downloaded by ASCII file transfer." ::= { base 31 } baseDefaultToPromCompatible OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cold Boot From PROM. If set to yes the MegaPAC software may be downloaded by ASCII file transfer." ::= { base 32 } -- The Controller Group (Statistics Section) -- The Controller Group described below relates to MegaPAC protocol -- interfaces that support a physical or virtual interface -- connection. The controller Group defines all parameters available -- in "flat table format", and as such, certain object types may or -- may not be presented depending on the controller type being used. ctrlNumberConfigured OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total Number of Controllers Configured. The number of controllers in the MegaPAC which have been configured." ::= { controller 1 } ctrlTotalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total Number of Controllers. The TOTAL number of controllers in the MegaPAC including unconfigured (NULL) controllers." ::= { controller 2 } ctrlStatTable OBJECT-TYPE SYNTAX SEQUENCE OF CtrlStatEntry ACCESS not-accessible STATUS mandatory ::= { controller 3 } ctrlStatEntry OBJECT-TYPE SYNTAX CtrlStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ctrlStatIndex } ::= { ctrlStatTable 1 } CtrlStatEntry ::= SEQUENCE { ctrlStatIndex INTEGER, ctrlStatName DisplayString, ctrlStatType INTEGER, ctrlStatSubType INTEGER, ctrlStatNumberChannels INTEGER, ctrlStatFirstChannelIndex INTEGER, ctrlStatCRCErrors Counter, ctrlStatTotalCallSetUps Counter, ctrlStatCurrentCalls INTEGER, ctrlStatDataIn Counter, ctrlStatDataOut Counter, ctrlStatDataFramesIn Counter, ctrlStatDataFramesOut Counter, ctrlStatDataFrameRateIn INTEGER, ctrlStatDataFrameRateOut INTEGER, ctrlStatCallsReceived Counter, ctrlStatCallsSent Counter, ctrlStatClearsReceived Counter, ctrlStatRetransmissions Counter, ctrlStatRejects Counter, ctrlStatState INTEGER, ctrlStatSubState INTEGER, ctrlStatNoTries Counter, ctrlStatOptions INTEGER, ctrlStatLCGN INTEGER, ctrlStatResetsReceived Counter, ctrlStatInterruptsReceived Counter, ctrlStatOutputQueueLength INTEGER, ctrlStatStationAddress DisplayString, ctrlStatDestinationAddress DisplayString, ctrlStatEIA DisplayString, ctrlStatSdlcOptions INTEGER, ctrlStatArpRequestRec INTEGER, ctrlStatArpRequestSent INTEGER, ctrlStatArpResponsesRec INTEGER, ctrlStatFRTxSeqLost INTEGER, ctrlStatFRRxSeqLost INTEGER, ctrlStatFRCurTxSeq INTEGER, ctrlStatFRCurRxSeq INTEGER, ctrlStatFRRcvBecn INTEGER, ctrlStatFRRcvFecn INTEGER, ctrlStatFRThroughput INTEGER, ctrlStatFRLMI INTEGER, ctrlStatFRrespLmi INTEGER, ctrlStatFRCurSndSeq INTEGER, ctrlStatFRCurRcvSeq INTEGER, ctrlStatFRRcvDe INTEGER } ctrlStatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Controller index. The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ..." REFERENCE "ALL" ::={ ctrlStatEntry 1 } ctrlStatName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Controller name. The unique 4 character name by which this controller is known." REFERENCE "ALL" ::={ ctrlStatEntry 2 } ctrlStatType OBJECT-TYPE SYNTAX INTEGER { x25(1), mux(2), null(3), epci(4), hdlc(8), qllc(9), xlan(10), ilan(11), term(12), lan(13), clus(14), mult(15), sdlc(16), ip(17), sru(18), v25b(19), cons(20), nmsc(21), dlc(22), map(23), tlan(24), snmp(25), nfrm(26), xfrm(27), tip(28), rout(29), ppp(30), ipx(31), tipx(32), esis(34), tesis(35), vfrm(36), smdx(37), dlcx(38), edlc(39) } ACCESS read-only STATUS mandatory DESCRIPTION "Controller Type. The type of controller this is. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::={ ctrlStatEntry 3 } ctrlStatSubType OBJECT-TYPE SYNTAX INTEGER { none(1), sio(2), xio(3), xio-sio(4), generic(5),scc(17), vio(33) } ACCESS read-only STATUS mandatory DESCRIPTION "Sub Type. The serial I/O board installed." REFERENCE "PPP X25 XFRM NFRM VFRM SDLC QLLC HDLC" ::={ ctrlStatEntry 4 } ctrlStatNumberChannels OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Channel Count. The number of channels assigned to a controller. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::={ ctrlStatEntry 5 } ctrlStatFirstChannelIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "First Channnel. The 1st channel index number used by the controller : PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC & HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::={ ctrlStatEntry 6 } ctrlStatCRCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CRC Errors. The number of packets received for which the checksum was not valid. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 7 } ctrlStatTotalCallSetUps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Call Set ups. The total number of successful calls established on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 8 } ctrlStatCurrentCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current Calls. The number of calls currently active on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 9 } ctrlStatDataIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data In. The total number of data bytes received on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 10 } ctrlStatDataOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data Out. The total number of data bytes transmitted on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 11 } ctrlStatDataFramesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data Frames In. The total number of data frames received on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 12 } ctrlStatDataFramesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data Frames Out. The total number of data frames transmitted on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 13 } ctrlStatDataFrameRateIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Data Frame Rate In. The rate that frames are arriving on this link, specified in frames per second. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 14 } ctrlStatDataFrameRateOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Data Frame Frate Out. The rate that frames are being transmitted on this link, specified in frames per second. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 15 } ctrlStatCallsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls Received. The total number of incoming call requests seen on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC, HDLC, IPX, TIPX, ESIS, LAN, TLAN, ILAN AND XLAN" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC IPX TIPX ESIS LAN TLAN ILAN XLAN" ::= { ctrlStatEntry 16 } ctrlStatCallsSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls Sent. The total number of call requests sent out on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC, HDLC, IPX, TIPX, ESIS, LAN, TLAN, ILAN AND XLAN" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC IPX TIPX ESIS LAN TLAN ILAN XLAN" ::= { ctrlStatEntry 17 } ctrlStatClearsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Clears Received. The total number of call clear requests received on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC, HDLC, IPX, TIPX, ESIS, LAN, TLAN, ILAN AND XLAN" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC IPX TIPX ESIS LAN TLAN ILAN XLAN" ::= { ctrlStatEntry 18 } ctrlStatRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Retransmissions. The number of packets that have been transmitted more than once on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 19 } ctrlStatRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Rejects. The total number of packets which have been rejected on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 20 } ctrlStatState OBJECT-TYPE SYNTAX INTEGER { disc(1), sabm(9), data(11), blkd(13), wake(15), cls(17), frmr(19), stop(21), xidr(23), xidc(25) } ACCESS read-only STATUS mandatory DESCRIPTION "State. The level 2 data state of the link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 21 } ctrlStatSubState OBJECT-TYPE SYNTAX INTEGER { norm(1), rej(5), disc(9), idle(1), actv(3), new(129) } ACCESS read-only STATUS mandatory DESCRIPTION "Sub State. The level 3 state of this link. Applicable controllers: PPP, X.25, XFRM, NFRM, VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 22 } ctrlStatNoTries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Tries. The number of un-numbered control frames sent to try and establish the link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 23 } ctrlStatOptions OBJECT-TYPE SYNTAX INTEGER { none(1), iso1984(16385), poll(32769), ext(8193), hold(4097), stat(2049), net(257), dmod(1025), dcd(513), ui(17), xidc(5), xidr(9), test(3), dtr(2), poll-ext(40961) } ACCESS read-only STATUS mandatory DESCRIPTION "Options The options currently configured for this link. Note, that the values returned by the MegaPAC may be additive values - representing combined combinations for the table listed e.g. poll+ext. In this situation modify the MIB entering the resulting integer value minus one e.g. 32769+8193-1=40961 (poll+ext) Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 24 } ctrlStatLCGN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LCGN The logical channel group number for this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 25 } ctrlStatResetsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Resets Received. The total number of reset packets received on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 26 } ctrlStatInterruptsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Interupts Received. The total number of interrupt packets received on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 27 } ctrlStatOutputQueueLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Output Queue Length. The number of packets queued for transmission on this link. Applicable controllers: PPP, X.25, XFRM, NFRM VFRM, CONS, DLC, SDLC, TERM, QLLC AND HDLC" REFERENCE "PPP X25 XFRM NFRM VFRM CONS DLC SDLC TERM QLLC HDLC" ::= { ctrlStatEntry 28 } ctrlStatStationAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Local MAC Address The MAC Address of the MegaPAC. Applicable controllers: CONS, IPX, TIPX, ESIS, IP, TIP LAN, TLAN, ILAN AND XLAN" REFERENCE "CONS IPX TIPX ESIS LAN TLAN ILAN XLAN IP TIP" ::= { ctrlStatEntry 29 } ctrlStatDestinationAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-only STATUS mandatory DESCRIPTION "Destination MAC Address. The MAC Address of the destination device. Applicable controllers: CONS only" REFERENCE "CONS" ::= { ctrlStatEntry 30 } ctrlStatEIA OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "EIA state. Displays the EIA signals currently on the link. Applicable controllers: X.25, QLLC and HDLC" REFERENCE "X25 QLLC HDLC" ::= { ctrlStatEntry 31 } ctrlStatSdlcOptions OBJECT-TYPE SYNTAX INTEGER { none(1), pu4(33), wait(65), xid(129), idle(17), wait-xid(193) } ACCESS read-only STATUS mandatory DESCRIPTION "SDLC Options. A range of link level options used for establishing IBM connections. Note, that the values returned by the MegaPAC may be additive values - representing combined combinations for the table listed e.g. wait+xid. In this situation modify the MIB entering the resulting integer value minus one e.g. 129+65-1=193 (wait+xid)" REFERENCE "QLLC SDLC" ::= { ctrlStatEntry 32 } ctrlStatArpRequestRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ARP Requests Received. The number of ARP requests sent to the MegaPAC" REFERENCE "IP TIP" ::= { ctrlStatEntry 33 } ctrlStatArpRequestSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ARP Requests Sent. The number of ARP requests processed to the local LAN by the MegaPAC" REFERENCE "IP TIP" ::= { ctrlStatEntry 34 } ctrlStatArpResponsesRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ARP Respones Received. The number of ARP responses returned to the the MegaPAC" REFERENCE "IP TIP" ::= { ctrlStatEntry 35 } ctrlStatFRTxSeqLost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of LMI without Reply" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 36 } ctrlStatFRRxSeqLost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Lost LMI" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 37 } ctrlStatFRCurTxSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LMI sequence number sent in enquiries" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 38 } ctrlStatFRCurRxSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LMI sequence number received in responses" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 39 } ctrlStatFRRcvBecn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of received frames with BECN" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 40 } ctrlStatFRRcvFecn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of received frames with FECN" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 41 } ctrlStatFRThroughput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of characters during T" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 42 } ctrlStatFRLMI OBJECT-TYPE SYNTAX INTEGER { down(0), up(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of LMI" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 43 } ctrlStatFRrespLmi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of LMI responses" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 44 } ctrlStatFRCurSndSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LMI sequence number sent in responses" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 45 } ctrlStatFRCurRcvSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LMI sequence number received in enquiries" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 46 } ctrlStatFRRcvDe OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of received frames with DE bit set" REFERENCE " XFRM NFRM VFRM" ::= { ctrlStatEntry 47 } -- The Controller configuration section ctrlParamTable OBJECT-TYPE SYNTAX SEQUENCE OF CtrlParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The controller configuration table." ::= { controller 4 } ctrlParamEntry OBJECT-TYPE SYNTAX CtrlParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An individual controller configuration." INDEX { ctrlParamIndex } ::= { ctrlParamTable 1 } CtrlParamEntry ::= SEQUENCE {ctrlParamIndex INTEGER, ctrlParamName DisplayString, ctrlParamType INTEGER, ctrlParamSubType INTEGER, ctrlParamNoChannels INTEGER, ctrlParamSpeed INTEGER, ctrlParamInterfaceType INTEGER, ctrlParamPacketSize INTEGER, ctrlParamV54Modem INTEGER, ctrlParamAddress INTEGER, ctrlParamOptions INTEGER, ctrlParamInitFrame INTEGER, ctrlParamT1 INTEGER, ctrlParamTries INTEGER, ctrlParamKLevel2 INTEGER, ctrlParamKLevel3 INTEGER, ctrlParamLineGroup INTEGER, ctrlParamLCGN INTEGER, ctrlParamLCNOffset INTEGER, ctrlParamAddressGroup INTEGER, ctrlParamFrameSequence INTEGER, ctrlParamCallTimeOut INTEGER, ctrlParamErrorThreshold INTEGER, ctrlParamLoopBarPriority INTEGER, ctrlParamExtendedCallMgmt INTEGER, ctrlParamOptionalTimers INTEGER, ctrlParamOptionalFlags INTEGER, ctrlParamTransportLevelType INTEGER, ctrlParamTransportClass INTEGER, ctrlParamDefaultWindowSize INTEGER, ctrlParamDisableFlowControl INTEGER, ctrlParamTSAPFormat INTEGER, ctrlParamMaximumTPDUSize INTEGER, ctrlParamTTRTime INTEGER, ctrlParamTWRTime INTEGER, ctrlParamDestinationAddress DisplayString, ctrlParamDSAP INTEGER, ctrlParamSSAP INTEGER, ctrlParamSDLCOptions INTEGER, ctrlParamPrimaryStation INTEGER, ctrlParamIdleDetectTime INTEGER, ctrlParamPollInterval INTEGER, ctrlParamDuplex INTEGER, ctrlParamTransmitDelay INTEGER, ctrlParamSlowPollTimer INTEGER, ctrlParamMaxCallInterval INTEGER, ctrlParamMaxCallCycles INTEGER, ctrlParamGroupPoll INTEGER, ctrlParamDelayToRTSLow INTEGER, ctrlParamDelayToCTSHigh INTEGER, ctrlParamInputSyncDeletion INTEGER, ctrlParamOutputSyncInsertion INTEGER, ctrlParamDCDFilter INTEGER, ctrlParamInhibitTimeFill INTEGER, ctrlParamDirectedBroadcasts INTEGER, ctrlParamDefaultLocalPrinter INTEGER, ctrlParamNewLANInterface INTEGER, ctrlParamNewSerialInterface INTEGER, ctrlParamDlci INTEGER, ctrlParamMode INTEGER, ctrlParamLmi INTEGER, ctrlParamKeepAliveTimer INTEGER, ctrlParamFullStatusInterval INTEGER, ctrlParamBandwidth INTEGER, ctrlParamBurstCommit INTEGER, ctrlParamBurstEligibility INTEGER, ctrlParamTimerT3 INTEGER, ctrlParamFlowControl INTEGER, ctrlParamConfigState INTEGER, ctrlParamTry INTEGER } ctrlParamIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ... Applicable: All controller types" REFERENCE "ALL" ::={ ctrlParamEntry 1 } ctrlParamName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. The unique 4 character name by which this controller is known. Applicable: All controller types" REFERENCE "ALL" ::={ ctrlParamEntry 2 } ctrlParamType OBJECT-TYPE SYNTAX INTEGER { x25(1), mux(2), null(3), epci(4), hdlc(8), qllc(9), xlan(10), ilan(11), term(12), lan(13), clus(14), mult(15), sdlc(16), ip(17), sru(18), v25b(19), cons(20), nmsc(21), dlc(22), map(23), tlan(24), snmp(25), nfrm(26), xfrm(27), tip(28), rout(29), ppp(30), ipx(31), tipx(32), esis(34), tesis(35), vfrm(36), smdx(37), dlcx(38), edlc(39) } ACCESS read-write STATUS mandatory DESCRIPTION "Type. The type of controller this is. Applicable: All controller types" REFERENCE "ALL" ::={ ctrlParamEntry 3 } ctrlParamSubType OBJECT-TYPE SYNTAX INTEGER { none(1), sio(2), xio(3), xio-sio(4), generic(5), scc(17), vio(33) } ACCESS read-write STATUS mandatory DESCRIPTION "Sub-Type. The link between the controller and its associated hardware type. Applicable: X25, SDLC, QLLC, HDLC and NULL controller types" REFERENCE "NFRM VFRM PPP QLLC SDLC X25 NULL XFRM" ::= { ctrlParamEntry 4 } ctrlParamNoChannels OBJECT-TYPE SYNTAX INTEGER (0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Number of channels. The number of logical channels configured on the controller. Applicable: All controller types" REFERENCE "ALL" ::= { ctrlParamEntry 5 } ctrlParamSpeed OBJECT-TYPE SYNTAX INTEGER { speed-2mbps(19), speed-1mbps(18), speed-512kbps(17), speed-256kbps(16), speed-128kbps(15), speed-64kbps(14), speed-12-75bps(13), speed-19200bps(12), speed-9600bps(11), speed-7200bps(10), speed-4800bps(9), speed-3600bps(8), speed-2400bps(7), speed-2000bps(6), speed-1800bps(5), speed-1200bps(4), speed-600bps(3), speed-300bps(2), ext-clock(1), none(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Speed. The clock speed of the interface. Applicable: X25, SDLC, QLLC, HDLC and NULL controller types" REFERENCE "NFRM VFRM PPP QLLC SDLC X25 NULL XFRM" ::= { ctrlParamEntry 6 } ctrlParamInterfaceType OBJECT-TYPE SYNTAX INTEGER { x21(2), v35(3), v24(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The serial interface type. Note, Only applicable to MegaCard Applicable: XFRM, NFRM, PPP, X25, HDLC controller types" REFERENCE "NFRM VFRM PPP QLLC SDLC X25 NULL XFRM" ::= { ctrlParamEntry 7 } ctrlParamPacketSize OBJECT-TYPE SYNTAX INTEGER { bytes-32(2), bytes-64(3), bytes-128(5), bytes-256(9), bytes-512(17), bytes-1024(33), tran(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Packet Size. The maximum packet size in bytes of outgoing packets, this parameter must be less than or equal to the 'BASE' statistic 'maxPacketSize'. Applicable: X25, TERM, HDLC, CONS, DLC and NULL controller types" REFERENCE "CONS DLC TERM X25 NULL HDLC" ::= { ctrlParamEntry 8 } ctrlParamV54Modem OBJECT-TYPE SYNTAX INTEGER { yes(61), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "V54 Modem. Enable V54 loop back testing. Note this does not initiate loop back testing, the loop back is initiated by typing in the 'TEST' command. Applicable: X25, HDLC and NULL controller types" REFERENCE "X25 NULL HDLC" ::= { ctrlParamEntry 9 } ctrlParamAddress OBJECT-TYPE SYNTAX INTEGER { dte-a(1), dce-b(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Address. The logical address designation of the controller. Applicable: X25, HDLC and NULL controller types" REFERENCE "X25 NULL HDLC" ::= { ctrlParamEntry 10 } ctrlParamOptions OBJECT-TYPE SYNTAX INTEGER { none(1), iso1984(16385), poll(32769), poll-net(33025), ext(8193), hold(4097), stat(2049), net(257), dmod(1025), dcd(513), ui(17), xidc(5), xidr(9), test(3), dtr(2), poll-ext(40961) } ACCESS read-write STATUS mandatory DESCRIPTION "Options. A range of controller options, options may be specified individually or added together. Note, that the values returned by the MegaPAC may be additive values - representing combined combinations for the table listed e.g. poll+ext. In this situation modify the MIB entering the resulting integer value minus one e.g. 32769+8193-1=40961 (poll+ext) Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC" REFERENCE "CONS DLC ILAN QLLC SDLC X25 NULL XLAN" ::= { ctrlParamEntry 11 } ctrlParamInitFrame OBJECT-TYPE SYNTAX INTEGER { sabm(48), sabm-pbit(64), disc(68), disc-pbit(84), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Initial Frame. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS DLC ILAN X25 NULL XLAN" ::= { ctrlParamEntry 12 } ctrlParamT1 OBJECT-TYPE SYNTAX INTEGER (2..80) ACCESS read-write STATUS mandatory DESCRIPTION "T1. Timer for retransmission of unacknowleged frames. Specified in 0.1 second units. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS DLC ILAN X25 NULL XLAN HDLC" ::= { ctrlParamEntry 13 } ctrlParamTries OBJECT-TYPE SYNTAX INTEGER (2..50) ACCESS read-write STATUS mandatory DESCRIPTION "Tries. The number of times a frame will be retransmitted before a link restart is initiated. Applicable: X25, SDLC, QLLC, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS DLC ILAN QLLC SDLC X25 NULL XLAN HDLC" ::= { ctrlParamEntry 14 } ctrlParamKLevel2 OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "KLevel 2. The level 2 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XLAN ILAN DLC HDLC" ::= { ctrlParamEntry 15 } ctrlParamKLevel3 OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "KLevel 3. The level 3 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC DLC ILAN" ::= { ctrlParamEntry 16 } ctrlParamLineGroup OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Line Group. The line group is used for load sharing. If two links have same (non-zero) line group then data may be shared between them. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN X25 NULL XFRM XLAN" ::= { ctrlParamEntry 17 } ctrlParamLCGN OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "LCGN. The logical channel group number for this link. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN X25 NULL XFRM XLAN" ::= { ctrlParamEntry 18 } ctrlParamLCNOffset OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "LCN Offset. This parameter is used in conjunction with the LCGN. It's purpose is to shift the channel range by the appropriate offset. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN X25 NULL XFRM XLAN" ::= { ctrlParamEntry 19 } ctrlParamAddressGroup OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Address Group. This parameter is used in conjunction with the address group field in the x25 file to provide different addressing domains. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN X25 NULL XFRM XLAN" ::= { ctrlParamEntry 20 } ctrlParamFrameSequence OBJECT-TYPE SYNTAX INTEGER { extended(15), normal(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Frame Sequence. This parameter determines if normal or extended frame sequencing is supported. Applicable: X25, SDLC, QLLC, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN QLLC SDLC X25 NULL XFRM XLAN" ::= { ctrlParamEntry 21 } ctrlParamCallTimeOut OBJECT-TYPE SYNTAX INTEGER (2..200) ACCESS read-write STATUS mandatory DESCRIPTION "Call Time Out. The time in seconds the MegaPAC will wait to receive a call accept packet before clearing the call. Applicable: X25, TERM, SDLC, QLLC, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN QLLC SDLC TERM X25 NULL XFRM XLAN" ::= { ctrlParamEntry 22 } ctrlParamErrorThreshold OBJECT-TYPE SYNTAX INTEGER (1..250) ACCESS read-write STATUS mandatory DESCRIPTION "Error Threshold. The number of CRC errors that will be accepted before generating an error report. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types" REFERENCE "CONS ILAN X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 23 } ctrlParamLoopBarPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Loop Bar Priority. Prevents calls from looping on the same controller. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 24 } ctrlParamExtendedCallMgmt OBJECT-TYPE SYNTAX INTEGER { in(2) , out(3), in-out(4), v25b(5), v25m(13), none(1), poll(17), fep(33) } ACCESS read-write STATUS mandatory DESCRIPTION "Extended Call Management. Invokes extended packet processing facilities via the MAC file. For PPP, IN and OUT have special meaning: IN stands for PAP and OUT for CHAP. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types. Also for PPP." REFERENCE "CONS X25 NULL XFRM XLAN HDLC PPP" ::= { ctrlParamEntry 25 } ctrlParamOptionalTimers OBJECT-TYPE SYNTAX INTEGER { t13(2), t23(3), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Optional Timers. Optional level 3 timers for clearing calls when a clear confirmation has not been received after a clear request has been sent. T13 is used if the controller is set to be a logical DCE and the timeout will be 60 seconds. T23 is used if the controller is a logical DTE and the timeout is 180 seconds. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 26 } ctrlParamOptionalFlags OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "Optional Flags. This parameter is used to insert extra flags between frames to slow down the rate of transmission. It will only take effect on controllers with a sub-type of XIO. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 27 } ctrlParamTransportLevelType OBJECT-TYPE SYNTAX INTEGER { iso(34), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transport Level Type. Enable the ISO transport facility. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 28 } ctrlParamTransportClass OBJECT-TYPE SYNTAX INTEGER { class3(49), class2(33), none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Transport Class. The type of transport class implemented. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 29 } ctrlParamDefaultWindowSize OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Default Window Size. The initial credit limit to be used on a transport session. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 30 } ctrlParamDisableFlowControl OBJECT-TYPE SYNTAX INTEGER { yes(2), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Disable Flow Control. Enable/disable flow control on a transport class 2 call. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 31 } ctrlParamTSAPFormat OBJECT-TYPE SYNTAX INTEGER { text(2), hex(1) } ACCESS read-write STATUS mandatory DESCRIPTION "TSAP Format. Determines how the TSAP's will be treated internally by the MegaPAC. If set to text the local and remote TSAP's will be converted to form a 4 character internal resource name. If set to hex the first two hexadecimal pairs will form the resource name. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 32 } ctrlParamMaximumTPDUSize OBJECT-TYPE SYNTAX INTEGER { bytes-1024(11), bytes-512(10), bytes-256(9), bytes128(8), bytes-128(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Max. TPDU Size. The maximum Transport Protocol Data Unit Size. Applicable: X25, HDLC, CONS, ILAN, XLAN and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC ILAN" ::= { ctrlParamEntry 33 } ctrlParamTTRTime OBJECT-TYPE SYNTAX INTEGER (0..120) ACCESS read-write STATUS mandatory DESCRIPTION "TTR Timer. Time To Resynchronise. Specifies the time delay in seconds for the transport class three timer to resync at the initiating end. Applicable: X25, HDLC, CONS, XLAN and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 34 } ctrlParamTWRTime OBJECT-TYPE SYNTAX INTEGER (0..120) ACCESS read-write STATUS mandatory DESCRIPTION "TWR Timer. Time to Wait for Resynchronisation. The time delay in seconds allowed for the transport class 3 timer at the responding end to wait for resynchronisation, before clearing down the transport session. Applicable: X25, HDLC, CONS, XLAN and NULL controller types" REFERENCE "CONS X25 NULL XFRM XLAN HDLC" ::= { ctrlParamEntry 35 } ctrlParamDestinationAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Destination Address. The physical address of the target device. Applicable: CONS, ILAN, DLC and XLAN controller types" REFERENCE "CONS DLC ILAN XLAN" ::= { ctrlParamEntry 36 } ctrlParamDSAP OBJECT-TYPE SYNTAX INTEGER (2..254) ACCESS read-write STATUS mandatory DESCRIPTION "DSAP. The Destination Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types" REFERENCE "CONS DLC ILAN XLAN" ::= { ctrlParamEntry 37 } ctrlParamSSAP OBJECT-TYPE SYNTAX INTEGER (2..254) ACCESS read-write STATUS mandatory DESCRIPTION "SSAP. The Source Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types" REFERENCE "CONS DLC ILAN XLAN" ::= { ctrlParamEntry 38 } ctrlParamSDLCOptions OBJECT-TYPE SYNTAX INTEGER { none(1), pu4(33), wait(65), xid(129), idle(17), wait-xid(193) } ACCESS read-write STATUS mandatory DESCRIPTION "SDLC Options. A range of link level options used for establishing IBM connections. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 39 } ctrlParamPrimaryStation OBJECT-TYPE SYNTAX INTEGER { yes(2), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Primary Station. This parameter determines whether the MegaPAC will operate as a HOST primary connection (yes) or a CLUSTER secondary connection (no). Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 40 } ctrlParamIdleDetectTime OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Idle Detect Timer. This parameter determines the time period in tenths of a second before an unacknowleged POLL/RESPONSE frame will be retransmitted. Applicable: SDLC, QLLC and SRU controller types" REFERENCE "SDLC QLLC SRU" ::= { ctrlParamEntry 41 } ctrlParamPollInterval OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Poll Interval. The time period in tenths of a second between sending POLL frames. Applicable: SDLC, QLLC, MAP and MULT controller types" REFERENCE "MAP MULT NFRM VFRM QLLC SDLC XFRM" ::= { ctrlParamEntry 42 } ctrlParamDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Duplex. Enables SDLC full duplex operation, half duplex operation is reserved for future use. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 43 } ctrlParamTransmitDelay OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit Delay. Determines the time period in tenths of a second between the MegaPAC receiving an RR frame with the P-Bit set and the MegaPAC issuing an RR response with the F-Bit set. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 44 } ctrlParamSlowPollTimer OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Slow Poll Timer. When the controller has been defined as a primary station a slow poll rate can be specified for polling a Cluster controller that is down. This is to avoid causing delays to working Cluster controllers in a multi-point mode. The value is specified in tenths of a second. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 45 } ctrlParamMaxCallInterval OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "Max. Call Interval. When controller is configured as a primary station, a call request retry interval may be defined, so as to avoid the situation where successive call requests are continuously generated to the network. The initial call interval is 2 seconds, this interval is progressively doubled until the Maximum Call Interval (defined in minutes) is reached. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 46 } ctrlParamMaxCallCycles OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Max. Call Cycles. This parameter is used in conjunction with the Maximum Call Interval parameter. It specifies the maximum number of call request cycles that can take effect before call requests continue at the Maximum Call Interval parameter setting. Each cycle consisting of call requests being initiated at intervals in incrementing multiples of two seconds, up to the Maximum Call Interval parameter. Applicable: SDLC and QLLC controller types" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 47 } ctrlParamGroupPoll OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Group Poll. Used in SNA applications, where the specified value would generate multiple down-stream poll requests. Applicable: QLLC, DLC controllers" REFERENCE "SDLC QLLC" ::= { ctrlParamEntry 48 } ctrlParamDelayToRTSLow OBJECT-TYPE SYNTAX INTEGER (0..256) ACCESS read-write STATUS mandatory DESCRIPTION "Delay RTS Low. Specifies the number of padding characters to be inserted between the end of data transmission and the dropping of the RTS signal. Only required for synchronous operation. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 49 } ctrlParamDelayToCTSHigh OBJECT-TYPE SYNTAX INTEGER (0..256) ACCESS read-write STATUS mandatory DESCRIPTION "Delay CTS High. Specifies the number of padding characters to be inserted between the dropping of RTS and the raising of CTS. Only required for synchronous operation. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 50 } ctrlParamInputSyncDeletion OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Input Sync Deletion. If set, all SYNC characters will be stripped prior to transmission. Only effective in synchronous full duplex mode. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 51 } ctrlParamOutputSyncInsertion OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Output Sync Insertion. Specifies the number of SYNC characters to be transmitted prior to the start of the data block. Only effective in synchronous operation. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 52 } ctrlParamDCDFilter OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "DCD Filter. A filter delay specified in tenths of a second which prevents unwanted link restarts caused by toggling of DCD signal. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 53 } ctrlParamInhibitTimeFill OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inhibit Time Fill Allows the insertion of time fill frames to compensate for network delays. Effective in synchronous mode only. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 54 } ctrlParamDirectedBroadcasts OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Directed Broadcasts. ???. Applicable: LAN and TLAN Controllers only" REFERENCE "LAN TLAN" ::= { ctrlParamEntry 55 } ctrlParamDefaultLocalPrinter OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "Default Local Printer. The number of the channel which is reserved for a Screen Print server, a value of (0) disables the Screen Print facility. Applicable: Cluster Controllers only" REFERENCE "CLUS" ::= { ctrlParamEntry 56 } ctrlParamNewLANInterface OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "New NFRM Port. The controller marks the first position of a controller connection to a LAN interface. All other controllers defined as NEWPhysicalInterface/ NO will map to the same interface defined as NewPhysicalInterface/ YES." REFERENCE "IP TIP IPX TIPX ESIS DLC LAN TLAN ILAN XLAN" ::= { ctrlParamEntry 57 } ctrlParamNewSerialInterface OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "New NFRM Port. The controller marks the first position of a controller connection to a serial interface. All other controllers defined as NEWPhysicalInterface/ NO will map to the same interface defined as NewPhysicalInterface/ YES." REFERENCE "PPP X25 XFRM NFRM VFRM SDLC QLLC HDLC" ::= { ctrlParamEntry 58 } ctrlParamDlci OBJECT-TYPE SYNTAX INTEGER (1..1022) ACCESS read-write STATUS mandatory DESCRIPTION "DLCI Number" REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 59 } ctrlParamMode OBJECT-TYPE SYNTAX INTEGER { dte(2), dce(3), dte-dce(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of DLCI. Defines a Network to Network Interfaces (NNI) or User Network Interface (UNI) implentation. Where MegaPAC connects to a Frame Relay switch, this parameter just be defined as DTE i.e. a UNI. When MegaPAC acts as a Frame Relay switch, connecting to DTE using Network side of UNI, DCE operation must be specified. Otherwise when operating as a switch, connected to another switch, NNI i.e. DCE+DTE operation must be specified. All controllers mapped to the same physical interface must be configured the same mode setting." REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 60 } ctrlParamLmi OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), ansi(129) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of Local Management Interface (LMI). Ansi = ANSI LMI yes = T1.S1 LMI no = LMI disabled." REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 61 } ctrlParamKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER (2..80) ACCESS read-write STATUS mandatory DESCRIPTION "Only applicable if the LMI is active. Specifies in seconds the interval between keep alive messages. If this end is a DTE, this is the actual interval between Status Requests generated to the DCE (T391). If this end is a DCE, then the timer is used simply to detect whether connection to the DTE has been lost (T392). Note : it is the DTE which is the active partner across the LMI interface, in accordance with the LMI specification." REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 62 } ctrlParamFullStatusInterval OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Full status enquiry timer (number of times of T391/T392) Specifies how often a DTE sends a or a DCE expects a Full Status Request message. The number specified is the ratio between Status Requests messages, and Full Status Request enquiries (N391/N393)." REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 63 } ctrlParamBandwidth OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Rhe sample period used in enforcing the committed information rate (CIR). The CIR expressed in terms of characters per 1/10 th second. There are two further parameters which appear directly after the BANDWIDTH/ promt which are designed to handle bursty traffic (i.e. Bc and Be)" REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 64 } ctrlParamBurstCommit OBJECT-TYPE SYNTAX INTEGER(0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Burst Commit, i.e the number of characters the remote end is committed to buffering, in our case in a 1/10 th of a second period" REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 65 } ctrlParamBurstEligibility OBJECT-TYPE SYNTAX INTEGER(0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Burst Eligibility, i.e the DLCI in questions is enabled to transmit a burst beyond its committed information rate, when enabled to do so by the state of the other DLCIs." REFERENCE " XFRM NFRM VFRM" ::= { ctrlParamEntry 66 } ctrlParamTimerT3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "T3. Timer to disconnect the link if no flags are received. Specified in 0.1 second units. Applicable: X25 controller types with XIO subtype" ::= { ctrlParamEntry 67 } ctrlParamFlowControl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Enables MULT flow control. On MULT controller type flow control inhibits data on all ressources when a single ressource requires flow control." REFERENCE " MULT " ::= { ctrlParamEntry 68 } ctrlParamConfigState OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "Command to set the state of the controller. Set this parameter to 1 to restart the controller. Set this parameter to 2 to stop the controller. The value read is meaningless." ::={ ctrlParamEntry 69 } ctrlParamTry OBJECT-TYPE SYNTAX INTEGER (0..99) ACCESS read-write STATUS mandatory DESCRIPTION "This value used to detect whether connection to the other end has been lost. The number specified is the ratio between Status Requests messages, and Full Status Request enquiries, above which an LMI error is recognized (N392)." REFERENCE "XFRM NFRM VFRM" ::={ ctrlParamEntry 70 } -- The Channel Group (Statistics) -- The Channel Group described below forms a direct association with -- a MegaPAC controller, and form the principle routing interface -- by which data movement is internally switched between a source -- (i.e. inbound connection) and destination resource (i.e. out- -- bound connection). chanNumberConfigured OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of channels. The number of channels configured." ::= { channel 1 } chanStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ChanStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of channels associated with a controller." ::= { channel 2 } chanStatEntry OBJECT-TYPE SYNTAX ChanStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An individual channel entry." INDEX { chanStatIndex } ::= { chanStatTable 1 } ChanStatEntry ::= SEQUENCE { chanStatIndex INTEGER, chanStatName DisplayString, chanStatControllerIndex INTEGER, chanStatNameCtrlName DisplayString, chanStatConnectedToChannelIndex INTEGER, chanStatState INTEGER, chanStatSessionStatus INTEGER, chanStatEIA INTEGER, chanStatTotalFramesIn Counter, chanStatTotalFramesOut Counter, chanStatTotalCharsIn Counter, chanStatTotalCharsOut Counter, chanStatTxWindow INTEGER, chanStatRxWindow INTEGER, chanStatTxSize INTEGER, chanStatRxSize INTEGER, chanStatCause INTEGER, chanStatDiagnostic INTEGER, chanStatResetCause INTEGER, chanStatResetDiagnostic INTEGER, chanStatResetCauseReceived INTEGER, chanStatResetDiagReceived INTEGER, chanStatLevel3State INTEGER, chanStatCallPriority INTEGER, chanStatResourcePriority INTEGER, chanStatPadEnable INTEGER, chanStatPortMatch INTEGER, chanStatPrimaryStation INTEGER, chanStatSDLCState INTEGER, chanStatQLLCState INTEGER, chanStatSDLCTransmitState INTEGER, chanStatPolls INTEGER, chanStatStationAddress INTEGER, chanStatXIDIdentification DisplayString, chanStatTries INTEGER, chanStatWindow INTEGER, chanStatLUActive INTEGER, chanStatBindActive INTEGER, chanStatLUType INTEGER, chanStatBreaksReceived Counter, chanStatFramingErrors Counter, chanStatInputOverruns Counter, chanStatParityErrors Counter, chanStatTerminalType INTEGER, chanStatCircuitType INTEGER, chanStatOptions INTEGER, chanStatBuffers INTEGER, chanStatDiscMode INTEGER, chanStatMenuNumber INTEGER, chanStatHelpNumber INTEGER, chanStatNewsNumber INTEGER, chanStatPadRecall INTEGER, chanStatEcho INTEGER, chanStatDataForwarding INTEGER, chanStatDelay INTEGER, chanStatDRI INTEGER, chanStatPadSignals INTEGER, chanStatBreak INTEGER, chanStatPadding INTEGER, chanStatFold INTEGER, chanStatDRO INTEGER, chanStatLFI INTEGER, chanStatLFPad INTEGER, chanStatEdit INTEGER, chanStatCharDel INTEGER, chanStatBufferDel INTEGER, chanStatDisp INTEGER, chanStatEditServiceSignals INTEGER, chanStatEchoMask INTEGER, chanStatParityTreatment INTEGER, chanStatPageWait INTEGER, chanStatForce INTEGER, chanStatBreakChar INTEGER, chanStatNetworkParity INTEGER, chanStatEscapeDelay INTEGER, chanStatTransportLevelState INTEGER, chanStatDestTsap DisplayString, chanStatLinkState INTEGER, chanStatProtocolState INTEGER, chanStatProtocol INTEGER, chanStatIdentity INTEGER, chanStatFrameRelayWait INTEGER } chanStatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The position of this channel in the controller channel Table. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 1 } chanStatName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Name. A user defined name for routing calls to this channel. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 2 } chanStatControllerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Controller Index. The index to the controller that this channel operates within. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 3 } chanStatNameCtrlName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Controller Name. The controller NAME supporting this channel Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 4 } chanStatConnectedToChannelIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Connected to Index. The INDEX of the controller that this channel is connected to. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 5 } chanStatState OBJECT-TYPE SYNTAX INTEGER { disc(1), emul(73), emul(69), post(57), busy(49), call(45), data(41), wake(37), setup(33), rout(29), addr(25), name(21), look(17), serv(13), pass(9), rung(5) } ACCESS read-only STATUS mandatory DESCRIPTION "State. The current Status of the channel, the status may be one or a combination of the following: Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 6 } chanStatSessionStatus OBJECT-TYPE SYNTAX INTEGER { none(1), tran(2), dri(3), dro(5), call(9), pad(17), queu(33), stat(65), disc(129) } ACCESS read-only STATUS mandatory DESCRIPTION "Session Status. The Status of the channel during a call session, the status may be one or a combination of the following: State Description CALL Call Originator. DRI Flow controlling input. DRO Flow controlling on output. TRAN Presentation service not involved in call set-up. QUEU Queued to selected resource. STAT Awaiting queue status information. PAD In PAD Recall mode. DISC Data buffers draining before clearing call. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP SNMP DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP ROUT" ::={ chanStatEntry 7 } chanStatEIA OBJECT-TYPE SYNTAX INTEGER { none(1), dcd(2), ring(3), x28(5), rej(9), iso(17), tcal(33), closed(65), down(129) } ACCESS read-only STATUS mandatory DESCRIPTION "EIA Displays the status of the V24/V28 signals on term or muxport links, or call status on X.25 links. The down state indicates that level 2 is inactive. Applicable controllers: NMS, CONS, V25B, SRU, IP, SDLC, MULT, CLUS, LAN, TERM, ILAN, XLAN, QLLC, HDLC, X25, MUX, MAP, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX, TIPX, TIP, ROUT and SNMP" REFERENCE "NMS CONS V25B SRU IP SDLC MULT CLUS LAN TERM ILAN XLAN QLLC HDLC X25 MAP ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP SNMP" ::={ chanStatEntry 8 } chanStatTotalFramesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Frames In. The total number of frames received on this channel since it entered Data State. Applicable controllers: CONS, IP, SDLC, TIP, LAN, TIPX, ILAN, XLAN, QLLC, HDLC, X25, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX and ROUT" REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::={ chanStatEntry 9 } chanStatTotalFramesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Frames out. The total number of frames transmitted on this channel since it entered Data State. Applicable controllers: CONS, IP, SDLC, TIP, LAN, TIPX, ILAN, XLAN, QLLC, HDLC, X25, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX and ROUT" REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::={ chanStatEntry 10 } chanStatTotalCharsIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Characters In. The total number of characters received on this channel since it entered Data State. Applicable controllers: CONS, IP, SDLC, TIP, LAN, TIPX, ILAN, XLAN, QLLC, HDLC, X25, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX and ROUT" REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::={ chanStatEntry 11 } chanStatTotalCharsOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Characters Out. The total number of characters transmitted on this channel since it entered Data State. Applicable controllers: CONS, IP, SDLC, TIP, LAN, TIPX, ILAN, XLAN, QLLC, HDLC, X25, DLC, TLAN, NFRM VFRM, XFRM, PPP, ESIS, IPX and ROUT" REFERENCE "CONS IP SDLC LAN ILAN XLAN QLLC HDLC X25 ROUT DLC TLAN NFRM VFRM XFRM PPP ESIS IPX TIPX TIP" ::={ chanStatEntry 12 } chanStatTxWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Tx Window. The Level 3 Transmit Window size. Applicable controllers: CONS, ILAN, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS ILAN XLAN HDLC X25 NFRM VFRM XFRM " ::={ chanStatEntry 13 } chanStatRxWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Rx Window. The Level 3 Receive Window size. Applicable controllers: CONS, ILAN, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS ILAN XLAN HDLC X25 NFRM VFRM XFRM " ::={ chanStatEntry 14 } chanStatTxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Tx Size. The maximum size for outgoing packets. Applicable controllers: CONS, ILAN, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS ILAN XLAN HDLC X25 NFRM VFRM XFRM " ::={ chanStatEntry 15 } chanStatRxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Rx Size. The maximum acceptable size for incoming packets. Applicable controllers: CONS, ILAN, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS ILAN XLAN HDLC X25 NFRM VFRM XFRM " ::={ chanStatEntry 16 } chanStatCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cause. The value of the cause code in the last Clear Packet received or transmitted (decimal). Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 17 } chanStatDiagnostic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Diagnostic. The value of the diagnostic code in the last Clear Packet received or transmitted (decimal). Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 18 } chanStatResetCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reset Cause. The value of the last reset code in the last RESET packet transmitted. Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 19 } chanStatResetDiagnostic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reset Diagnostic. The value of the last diagnostic code in the last RESET packet transmitted. Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 20 } chanStatResetCauseReceived OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reset Cause Received. The value of the last reset code in the last RESET packet received. Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 21 } chanStatResetDiagReceived OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reset Diagnostic Received. The value of the last diagnostic code in the last RESET packet received. Applicable controllers: CONS, QLLC, XLAN, HDLC, X25, NFRM VFRM, SDLC, DLC and XFRM" REFERENCE "CONS QLLC XLAN HDLC X25 NFRM VFRM XFRM SDLC DLC" ::={ chanStatEntry 22 } chanStatLevel3State OBJECT-TYPE SYNTAX INTEGER { disc(1), rest(3), call(5), data(7), cls(9), clr(11), reset(13) } ACCESS read-only STATUS mandatory DESCRIPTION "Level 3 State. The level 3 status of the channel. Applicable controllers: CONS, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS XLAN HDLC X25 NFRM VFRM XFRM" ::={ chanStatEntry 23 } chanStatCallPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming channel must be greater than or equal to the Resource Priority on the outgoing channel. Applicable controllers: CONS, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS XLAN HDLC X25 NFRM VFRM XFRM" ::={ chanStatEntry 24 } chanStatResourcePriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource Priority See chanCallPriority above. Applicable controllers: CONS, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS XLAN HDLC X25 NFRM VFRM XFRM" ::={ chanStatEntry 25 } chanStatPadEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), rev(3), prof(5), mask(17), x28(33) } ACCESS read-only STATUS mandatory DESCRIPTION "PAD Enable. The value of this statistic reflects the setting as configured on the channel. Applicable controllers: CONS, XLAN, HDLC, X25, NFRM VFRM and XFRM" REFERENCE "CONS XLAN HDLC X25 NFRM VFRM XFRM" ::={ chanStatEntry 26 } chanStatPortMatch OBJECT-TYPE SYNTAX INTEGER { no(1), srce(2), dest(129), wild(137) } ACCESS read-only STATUS mandatory DESCRIPTION "Port Match. The TCP port that is connected Applicable controllers: IP, LAN, TLAN, ESIS, IPX, TIPX, and TIP" REFERENCE "IP LAN TLAN ESIS IPX TIPX TIP" ::={ chanStatEntry 27 } chanStatPrimaryStation OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Primary Station. Determines whether the MegaPAC port is functioning as a Primary or Secondary SDLC station. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 28 } chanStatSDLCState OBJECT-TYPE SYNTAX INTEGER { idle(1), snrm(3), active(5), poll(7), disc(9) } ACCESS read-only STATUS mandatory DESCRIPTION "SDLC State. The State of the SDLC connection, may be one of the following: State Description ACTIVE The SNRM and UA commands have been sent successfully. If primary, the P-Bit has not been sent (i.e. has not been polled). If secondary, the P-Bit has not been received (has got F-Bit and not been polled again). DISC Primary station only. Either a 'STOP' command has been issued for the port, or a QDISC command has been received from the network. The MegaPAC will be sending an SDLC DISC command with the P-Bit set. POLL If primary, the MegaPAC has sent a frame with the P-Bit (has polled). If secondary, the MegaPAC has received the P-Bit (has been polled). SNRM Only for primary stations. The MegaPAC has sent a SNRM, but has not received a UA. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 29 } chanStatQLLCState OBJECT-TYPE SYNTAX INTEGER { inop(1), clsd(5), openi(9), frmr(13), clsi(17), open(21) } ACCESS read-only STATUS mandatory DESCRIPTION "QLLC State. The State of the QLLC connection, may be one of the following: State Description CLSD The MegaPAC has received a QDISC and sent a QUA on the network. This sets the DISC state on the SDLC port. CLSI The MegaPAC has sent a QDISC and is waiting for a QUA. FRMR The MegaPAC has received a QFRMR from the network. INOP The SVC is down. OPEN The VC is running. QSM and QUA have been sent and received. OPNI The MegaPAC has sent a QSM and is awaiting a QUA. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 30 } chanStatSDLCTransmitState OBJECT-TYPE SYNTAX INTEGER { idle(1), norm(3), rtry(7), rnr(11) } ACCESS read-only STATUS mandatory DESCRIPTION "SDLC Transmit State. May be one of the following: State Description NORM The MegaPAC is allowed to transmit data. NULL The MegaPAC is not allowed to transmit data. RNR The MegaPAC has received an RNR. RTRY The MegaPAC is in the retransmission state. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 31 } chanStatPolls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Polls. The quantity of polls that have occured since the link was established Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 32 } chanStatStationAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Station Address. The IBM PU's address that this channel is using Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 33 } chanStatXIDIdentification OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "XID Identification. This field contains the first 64 bytes of the XID that has been used. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 34 } chanStatTries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Tries. The number of times the current command has been transmitted. Applicable controllers: QLLC, SDLC, PPP and DLC" REFERENCE "SDLC QLLC DLC PPP" ::={ chanStatEntry 35 } chanStatWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "KLevel 2. The level 2 window size. Applicable controllers: QLLC, SDLC and DLC" REFERENCE "SDLC QLLC DLC" ::={ chanStatEntry 36 } chanStatLUActive OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "LU Active. If set to YES then the MegaPAC Logical Unit has responded positively to an ACTLU command. If set to NO the MegaPAC has either not received or has responded negatively to an ACTLU command. Applicable controllers: CLUS only" REFERENCE "CLUS" ::={ chanStatEntry 37 } chanStatBindActive OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Bind Active. If set to YES then the MegaPAC Logical Unit has responded positively to a BIND command. If set to NO the MegaPAC has either not received or has responded negatively to a BIND command. Applicable controllers: CLUS only" REFERENCE "CLUS" ::={ chanStatEntry 38 } chanStatLUType OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "LU Type. The Session type taken from the BIND command. It may be one of the following: Session Type Description 0 User defined applications. 1 Printer. 2 Full Screen 3270 applications. 3 Older type printers. Applicable controllers: CLUS only" REFERENCE "CLUS" ::={ chanStatEntry 39 } chanStatBreaksReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Breaks Rx The number of Break characters received from the terminal. Applicable controllers: TERM only" REFERENCE "TERM" ::={ chanStatEntry 40 } chanStatFramingErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Framing Errors. The number of characters received with no stop bit appended. The MegaPAC substitutes a '#' character in place of each framing error. Applicable controllers: TERM only" REFERENCE "TERM" ::={ chanStatEntry 41 } chanStatInputOverruns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input Overruns. The number of times that data has been discarded due to a lack of receive buffers. Applicable controllers: TERM only" REFERENCE "TERM" ::={ chanStatEntry 42 } chanStatParityErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "TParity Errors. he number of parity errors received on this channel. Applicable controllers: TERM only" REFERENCE "TERM" ::={ chanStatEntry 43 } chanStatTerminalType OBJECT-TYPE SYNTAX INTEGER { asyn(2), sync(3), hp(225), x28(209), x28f(999), ansi(177), ext-ansi(161), vpad(129), mtrm(113), slip(97), buf(81), tpad(65), vt200(41) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal Type. The type of emulation to be applied to the TERM controller, it may be one or more of the following: Type comment ASYN ASCII data support SYNC Bi-sync data support MINI Minitel terminal support HP H.P ENQ / ACK async protocol support X28 X28 command syntax (English) X28F X28 command syntax (French) ANSI Async ASCII Terminal support VPAD Viewdata PAD Emulation support MTRM MegaTerm PC Emulation support BUF Used for Buffer PVC call set-ups TPAD ACAB30 transaction card terminal support VT22 Async VT220Terminal support" REFERENCE "TERM" ::={ chanStatEntry 44 } chanStatCircuitType OBJECT-TYPE SYNTAX INTEGER { none(1), osi(5), queu(4), call(2), svc(33), out(17), stat(65),call-stat(66), call-pvc(10), call-pvc-stat(74), out-stat(81),out-pvc(25), out-pvc-stat(89), svc-stat(97) } ACCESS read-only STATUS mandatory DESCRIPTION "Circuit Type. The type of circuit used on this channel, it may be one or more of the following:" REFERENCE "TERM" ::={ chanStatEntry 45 } chanStatOptions OBJECT-TYPE SYNTAX INTEGER { none(1), rts(2), idle(3), busy(5), hold(9), nbrk(17), arps(65), iso(129), pass(257), bill(513), msgs(1025), gate(2049), name(4097), talk(8193), x28(16385), supr(32769) } ACCESS read-only STATUS mandatory DESCRIPTION "The option(s) which have been envoked on this channel, one or more of:" REFERENCE "TERM" ::={ chanStatEntry 46 } chanStatBuffers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Buffers. The number of data buffers to be used as a threshold value before flow control to the terminal is invoked." REFERENCE "TERM" ::={ chanStatEntry 47 } chanStatDiscMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Disc mode. Specifies the call disconnect character that may be applied having established a route via the presentation service." REFERENCE "TERM" ::={ chanStatEntry 48 } chanStatMenuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Menu Number. Specifies which menu will be displayed to the user by the presentation service." REFERENCE "TERM" ::={ chanStatEntry 49 } chanStatHelpNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Help Number. Specifies which help menu will be displayed to the user by the presentation service." REFERENCE "TERM" ::={ chanStatEntry 50 } chanStatNewsNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "News Number. The Menu number that will be displayed if an outgoing resource is unavailable." REFERENCE "TERM" ::={ chanStatEntry 51 } chanStatPadRecall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pad Recall. This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted values are: 0 No PAD recall 1 Escape character is ^P 2 - 126 The decimal value specified is the escape character" REFERENCE "TERM" ::={ chanStatEntry 52 } chanStatEcho OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), controlled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator." REFERENCE "TERM" ::={ chanStatEntry 53 } chanStatDataForwarding OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible values may be added together to forward on one of a number of conditions. The allowable values are: 0 Forward only on buffer full. 128 Forward on graphics characters. 64 Forward on all characters in columns 0 and 1 of the International Alphabet No. 5. 1 Forward on A-Z, a-z and 0-9. 2 Forward on Carriage Return. 4 Forward on ESC, BEL, ENQ, ACK. 8 Forward on DEL, CAN, DC2. 16 Forward on EXT, EOT. 32 Forward on HT, LF, VT, FF." REFERENCE "TERM" ::={ chanStatEntry 54 } chanStatDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwarded. A value of 0 disables the timeout facility." REFERENCE "TERM" ::={ chanStatEntry 55 } chanStatDRI OBJECT-TYPE SYNTAX INTEGER { enabled(2), cts(129), init-enable(3), disabled(1), rts(33), init(65) } ACCESS read-only STATUS mandatory DESCRIPTION "DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. cts MegaPAC flow controls terminal using CTS. init+enable MegaPAC sends XON automatically on initialisation. disable No flow control." REFERENCE "TERM" ::={ chanStatEntry 56 } chanStatPadSignals OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal." REFERENCE "TERM" ::={ chanStatEntry 57 } chanStatBreak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Break Signal from the terminal no action is taken. 1 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet. 2 When the MegaPAC receives a Break Signal from the terminal it will transmit an RESET packet. 5 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet and an indication of Break PAD message. 8 When the MegaPAC receives a Break Signal from the terminal it will escape from data transfer state. 21 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet and an indication of Break PAD message, while setting (X3) parameter (8) to the value 1 (discard any data received from the network)." REFERENCE "TERM" ::={ chanStatEntry 58 } chanStatPadding OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Padding. The number of NULL characters inserted after a carriage return." REFERENCE "TERM" ::={ chanStatEntry 59 } chanStatFold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fold The number of characters output before line folding occurs. Setting to 0 disables line folding." REFERENCE "TERM" ::={ chanStatEntry 60 } chanStatDRO OBJECT-TYPE SYNTAX INTEGER { enabled(2), -- Terminal to flow control using XON/XOFF cts(129), -- Flow control using CTS disabled(1), -- No flow control by terminal init(65) } ACCESS read-only STATUS mandatory DESCRIPTION "Data Restraint Out." REFERENCE "TERM" ::={ chanStatEntry 61 } chanStatLFI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LFI. This parameter controls linefeed insertion after a carriage return. The valid seetings are: 0 Line feed insertion disabled. 1 A linefeed is inserted after a carriage return, in the data forwarded to the terminal. 4 A linefeed is sent to the terminal after echo of a carriage return to the terminal. 5 As defined by values 1 + 4. 6 Linefeed inserted after carriage return from terminal and each carriage return echoed to the terminal. 7 As defined by values 1 + 6." REFERENCE "TERM" ::={ chanStatEntry 62 } chanStatLFPad OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "LFPad. The number of NULL padding characters sent to a device following a linefeed character." REFERENCE "TERM" ::={ chanStatEntry 63 } chanStatEdit OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Edit. Controls editing of text in data transfer state." REFERENCE "TERM" ::={ chanStatEntry 64 } chanStatCharDel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Char Del. The keystroke used for deleting a character." REFERENCE "TERM" ::={ chanStatEntry 65 } chanStatBufferDel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Buffer Del. The keystroke used for deleting the buffer." REFERENCE "TERM" ::={ chanStatEntry 66 } chanStatDisp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Disp The keystroke used to redisplay the data in the buffer." REFERENCE "TERM" ::={ chanStatEntry 67 } chanStatEditServiceSignals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 No editing PAD service signals are echoed. 1 A '\' will be echoed for each character deleted. 2 A 'BS' character will be echoed for each character deleted. 8 and 32-126 Specifies the decimal value of the ASCII character to be echoed for each character deleted." REFERENCE "TERM" ::={ chanStatEntry 68 } chanStatEchoMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do not echo carriage return. 2 do not echo linefeed. 4 do not echo VT, HT and FF characters. 8 do not echo BEL and BS character. 16 do not echo ESC and ENQ. 32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX. 64 do not echo editing characters as defined by parameters 16, 17 and 18. 128 do not echo other control characters and DEL." REFERENCE "TERM" ::={ chanStatEntry 69 } chanStatParityTreatment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or checking. 1 Check parity. 2 Generate parity. 3 Check and generate parity." REFERENCE "TERM" ::={ chanStatEntry 70 } chanStatPageWait OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PageWait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to continue sending data (by entering Q). A value of 0 disables the page wait facility." REFERENCE "TERM" ::={ chanStatEntry 71 } chanStatForce OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Forward Char. The ASCII character which will force data forwarding, 0 disables forced data forwarding." REFERENCE "TERM" ::={ chanStatEntry 72 } chanStatBreakChar OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Break Char. The ASCII character in decimal which is used to simulate a BREAK signal." REFERENCE "TERM" ::={ chanStatEntry 73 } chanStatNetworkParity OBJECT-TYPE SYNTAX INTEGER { even(1), odd(2), mark(4), spac(8), none(0) } ACCESS read-only STATUS mandatory DESCRIPTION "Network Parity. With the Terminal type set to ASYN+X28, the parity an be forced onto the network side by selecting the approriate value." REFERENCE "TERM" ::={ chanStatEntry 74 } chanStatEscapeDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before being forwarded. During this time the ECHO facility is turned off, and is only restored when the delay timer has expired." REFERENCE "TERM" ::={ chanStatEntry 75 } chanStatTransportLevelState OBJECT-TYPE SYNTAX INTEGER { disc(1), call(3), init(5), data(7), cls(9), clr(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Transport Level State. Transport Class 4 session statistics" REFERENCE "ILAN" ::={ chanStatEntry 76 } chanStatDestTsap OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Destination TSAP The destination Transport Service Access Point. Applicable controllers: ILAN only" REFERENCE "ILAN" ::={ chanStatEntry 77 } chanStatLinkState OBJECT-TYPE SYNTAX INTEGER { open(15), acks(13), ackr(11), reqs(9), stpi(7), clsi(5), stop(3), clos(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Link State. The current state of the Link Control Protocol Applicable controllers: PPP only" REFERENCE "PPP" ::={ chanStatEntry 78 } chanStatProtocolState OBJECT-TYPE SYNTAX INTEGER { open(15), acks(13), ackr(11), reqs(9), stpi(7), clsi(5), stop(3), clos(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocol State. The current state of the Protocol Control Protocol Applicable controllers: PPP only" REFERENCE "PPP" ::={ chanStatEntry 79 } chanStatProtocol OBJECT-TYPE SYNTAX INTEGER { ip(32802), ipx(32812) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocol Displays the protocol configured for the channel Applicable controllers: PPP only" REFERENCE "PPP" ::={ chanStatEntry 80 } chanStatIdentity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identity. The current value of the IDENTITY filed being put into the Link Control Protocol or Protocol Control Protocol commands. Applicable controllers: PPP only" REFERENCE "PPP" ::={ chanStatEntry 81 } chanStatFrameRelayWait OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FrameRelayWait. The current value of the FRMWAIBUF counter. This counter is incremented each time a buffer is delayed because of the channel priority (DLCI currently occupied by data from channels with higher priority). Applicable controllers: NFRM only" REFERENCE "NFRM" ::={ chanStatEntry 82 } -- The Channel controllers chanParamTable OBJECT-TYPE SYNTAX SEQUENCE OF ChanParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of channels associated with this Level 2 controller." ::= { channel 3 } chanParamEntry OBJECT-TYPE SYNTAX ChanParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An individual Channel." INDEX { chanParamIndex } ::= { chanParamTable 1 } ChanParamEntry ::= SEQUENCE { chanParamIndex INTEGER, chanParamName DisplayString, chanParamDRCMask DisplayString, chanParamTerminalType INTEGER, chanParamCircuitType INTEGER, chanParamOptions INTEGER, chanParamBuffers INTEGER, chanParamDiscMode INTEGER, chanParamMenuNumber INTEGER, chanParamHelpNumber INTEGER, chanParamNewsNumber INTEGER, chanParamCallPriority INTEGER, chanParamResourcePriority INTEGER, chanParamPadEnable INTEGER, chanParamPadRecall INTEGER, chanParamEcho INTEGER, chanParamDataForwarding INTEGER, chanParamDelay INTEGER, chanParamDRI INTEGER, chanParamPadSignals INTEGER, chanParamBreak INTEGER, chanParamPadding INTEGER, chanParamFold INTEGER, chanParamDRO INTEGER, chanParamLFI INTEGER, chanParamLFPad INTEGER, chanParamEdit INTEGER, chanParamCharDel INTEGER, chanParamBufferDel INTEGER, chanParamDisp INTEGER, chanParamEditServiceSignals INTEGER, chanParamEchoMask INTEGER, chanParamParityTreatment INTEGER, chanParamPageWait INTEGER, chanParamForce INTEGER, chanParamBreakChar INTEGER, chanParamNetworkParity INTEGER, chanParamEscapeDelay INTEGER, chanParamStationAddress INTEGER, chanParamProvideXID INTEGER, chanParamMode INTEGER, chanParamPortMatch INTEGER, chanParamReverseTelnetPort INTEGER, chanParamBroadcastFilterTimer INTEGER, chanParamInhibitLearning INTEGER, chanParamRetainSession INTEGER, chanParamPrinterType INTEGER, chanParamScreenPrinter INTEGER, chanParamLocalPrinter INTEGER, chanParamBnnDsap INTEGER, chanParamBnnSsap INTEGER, chanParamBnnPuTyp INTEGER, chanParamPriority INTEGER } chanParamIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The position of this channel in the controller channel Table. Applicable: All controller types" REFERENCE "ALL" ::={ chanParamEntry 1 } chanParamName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. A user defined name for routing calls to this channel. Applicable: All controller types" REFERENCE "ALL" ::={ chanParamEntry 2 } chanParamDRCMask OBJECT-TYPE SYNTAX DisplayString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "DRC Mask. A four character string used to force expicit routing to the named resource. Applicable: All controller types" REFERENCE "ALL" ::={ chanParamEntry 3 } chanParamTerminalType OBJECT-TYPE SYNTAX INTEGER { asyn(2), sync(3), hp(225), x28(209), x28f(999), ansi(177), ext-ansi(161), vpad(129), mtrm(113), slip(97), buf(81), tpad(65), vt200(41) } ACCESS read-write STATUS mandatory DESCRIPTION "Terminal Type. If the channel is to perform terminal emulation, then the setting defined will be specific to the users terminal envoking emulation. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC, TERM, IP, DLC and CLUS controller types" REFERENCE "CLUS CONS IP TIP TERM X25 XFRM XLAN DLC ILAN SDLC QLLC" ::={ chanParamEntry 4 } chanParamCircuitType OBJECT-TYPE SYNTAX INTEGER { none(1), osi(5), queu(4), call(2), svc(33), out(17), stat(65),call-stat(66), call-pvc(10), call-pvc-stat(74), out-stat(81),out-pvc(25), out-pvc-stat(89), svc-stat(97) } ACCESS read-write STATUS mandatory DESCRIPTION "Circuit Type. The type of circuit used on this channel Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC, TERM, IP, LAN, V25B, NMS, MULT, MAP, TLAN, DLC and SRU controller types" REFERENCE "CONS DLC ESIS HDLC ILAN IP TIP IPX TIPX LAN TLAN MAP MULT NFRM VFRM NMS PPP QLLC SDLC ROUT SRU TERM V25B X25 XFRM XLAN" ::={ chanParamEntry 5 } chanParamOptions OBJECT-TYPE SYNTAX INTEGER { none(1), rts(2), idle(3), busy(5), hold(9), nbrk(17), arps(65), diag(33), iso(129), pass(257), bill(513), msgs(1025), gate(2049), name(4097), talk(8193), x28(16385), supr(32769), msgs-name(5121), msgs-name-talk(13313), msgs-pass(1281), msgs-pass-gate(3329), msgs-name-pass(5377), msgs-name-pass-talk(13569), msgs-name-pass-talk-gate(15617) } ACCESS read-write STATUS mandatory DESCRIPTION "Options. A range of channel options, these options may be specified individually or added together. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC, TERM, IP, LAN, V25, TLAN, DLC and CLUS controller types" REFERENCE "CLUS CONS IP TIP PPP ROUT TERM X25 XFRM XLAN" ::={ chanParamEntry 6 } chanParamBuffers OBJECT-TYPE SYNTAX INTEGER (1..240) ACCESS read-write STATUS mandatory DESCRIPTION "Buffers. The number of system buffers allocated to this channel for incoming calls. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC, TERM, IP, LAN, V25B, NMS, MULT, MAP, TLAN, DLC and SRU controller types" REFERENCE "ALL" ::={ chanParamEntry 7 } chanParamDiscMode OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "DISC Mode. The number of the character in decimal which forces disconnection of the call. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC TERM, DLC and IP controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 8 } chanParamMenuNumber OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "Menu Number. Specifies which menu will be displayed to the user by the presentation service. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC TERM, DLC, IP and CLUS controller types" REFERENCE "CLUS CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 9 } chanParamHelpNumber OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "Help Number. Specifies which help screen will be displayed to the user by the presentation service. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC TERM, DLC and IP controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 10 } chanParamNewsNumber OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "News Number. The number of the menu which will be displayed if an outgoing channel is unavailable. Applicable: X25, CONS, HDLC, ILAN, XLAN, SDLC, QLLC TERM, DLC and IP controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 11 } chanParamCallPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming channel must be greater than or equal to the Resource Priority on the outgoing channel. Applicable: X25, HDLC, CONS, XLAN, TERM, IP, LAN, NMS, V25B, MULT, MAP, TLAN, DLC and SRU controller types" REFERENCE "CONS DLC ESIS HDLC ILAN IP TIP IPX TIPX LAN TLAN MAP MULT NFRM VFRM NMS QLLC SDLC ROUT SRU TERM V25B X25 XFRM XLAN" ::={ chanParamEntry 12 } chanParamResourcePriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Resource Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming channel must be greater than or equal to the Resource Priority on the outgoing channel. Applicable: X25, HDLC, CONS, XLAN, TERM, IP, LAN, NMS, V25B, MULT, MAP, TLAN, DLC and SRU controller types" REFERENCE "CONS DLC ESIS HDLC ILAN IP TIP IPX TIPX LAN TLAN MAP MULT NFRM VFRM NMS QLLC SDLC ROUT SRU TERM V25B X25 XFRM XLAN" ::={ chanParamEntry 13 } chanParamPadEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), rev(3), enable-rev(4), prof(5), enable-prof(6), mask(7), enable-mask(8), x28(34) } ACCESS read-write STATUS mandatory DESCRIPTION "Pad Enable. The effect of the PAD Enable parameters are as follows: enable PAD services enabled. The logical channel will respond to X.29 packets. enable-rev REVerse PAD enabled. When a call is established to this channel, the MegaPAC will generate an X.29 qualified data packet back to the caller, containing the X.3 operating values specified in the channel's configuration. enable-prof The X.3 profile settings for the channel will be derived by referencing the logical channel's NAME/ parameter to the NAME/ field in the PROF file. The X.3 settings as contained in the PROF file record are then loaded onto the channel. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 14 } chanParamPadRecall OBJECT-TYPE SYNTAX INTEGER (0..126) ACCESS read-write STATUS mandatory DESCRIPTION "Pad Recall (1). This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted values are: 0 No PAD recall 1 Escape character is ^P 2 - 126 The decimal value specified is the escape character Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 15 } chanParamEcho OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), controlled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 16 } chanParamDataForwarding OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible values may be added together to forward on one of a number of conditions. The allowable values are: 0 Forward only on buffer full. 128 Forward on graphics characters. 64 Forward on all characters in columns 0 and 1 of the International Alphabet No. 5. 1 Forward on A-Z, a-z and 0-9. 2 Forward on Carriage Return. 4 Forward on ESC, BEL, ENQ, ACK. 8 Forward on DEL, CAN, DC2. 16 Forward on EXT, EOT. 32 Forward on HT, LF, VT, FF. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 17 } chanParamDelay OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwarded. A value of 0 disables the timeout facility. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 18 } chanParamDRI OBJECT-TYPE SYNTAX INTEGER { enabled(2), cts(129), init-enable(3), disabled(1), rts(33), init(65) } ACCESS read-write STATUS mandatory DESCRIPTION "DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. cts MegaPAC flow controls terminal using CTS. init+enable MegaPAC sends XON automatically on initialisation. disable No flow control. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 19 } chanParamPadSignals OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 20 } chanParamBreak OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Break Signal from the terminal no action is taken. 1 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet. 2 When the MegaPAC receives a Break Signal from the terminal it will transmit an RESET packet. 5 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet and an indication of Break PAD message. 8 When the MegaPAC receives a Break Signal from the terminal it will escape from data transfer state. 21 When the MegaPAC receives a Break Signal from the terminal it will transmit an INTERRUPT packet and an indication of Break PAD message, while setting (X3) parameter (8) to the value 1 (discard any data received from the network). Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 21 } chanParamPadding OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Padding. The number of NULL characters inserted after a carriage return. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 22 } chanParamFold OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Fold. The number of characters output before line folding occurs. Setting to 0 disables line folding. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 23 } chanParamDRO OBJECT-TYPE SYNTAX INTEGER { enabled(2), -- Terminal to flow control -- using XON/XOFF cts(129), -- Flow control using CTS disabled(1), -- No flow control by terminal init(65) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Restraint Out. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 24 } chanParamLFI OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "LFI. This parameter controls linefeed insertion after a carriage return. The valid settings are: 0 Line feed insertion disabled. 1 A linefeed is inserted after a carriage return, in the data forwarded to the terminal. 4 A linefeed is sent to the terminal after echo of a carriage return to the terminal. 5 As defined by values 1 + 4. 6 Linefeed inserted after carriage return from terminal and each carriage return echoed to the terminal. 7 As defined by values 1 + 6. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 25 } chanParamLFPad OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "LFPad. The number of NULL padding characters sent to a device following a linefeed character. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 26 } chanParamEdit OBJECT-TYPE SYNTAX INTEGER { enable(2), disable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Edit. Controls editing of text in data transfer state. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 27 } chanParamCharDel OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "Char Delete. The keystroke used for deleting a character. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 28 } chanParamBufferDel OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Buffer Delete. The keystroke used for deleting the buffer. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 29 } chanParamDisp OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Disp. The keystroke used to redisplay the data in the buffer. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 30 } chanParamEditServiceSignals OBJECT-TYPE SYNTAX INTEGER (0..126) ACCESS read-write STATUS mandatory DESCRIPTION "Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 No editing PAD service signals are echoed. 1 A '\' will be echoed for each character deleted. 2 A 'BS' character will be echoed for each character deleted. 8 and 32-126 Specifies the decimal value of the ASCII character to be echoed for each character deleted. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 31 } chanParamEchoMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do not echo carriage return. 2 do not echo linefeed. 4 do not echo VT, HT and FF characters. 8 do not echo BEL and BS character. 16 do not echo ESC and ENQ. 32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX. 64 do not echo editing characters as defined by parameters 16, 17 and 18. 128 do not echo other control characters and DEL. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 32 } chanParamParityTreatment OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or checking. 1 Check parity. 2 Generate parity. 3 Check and generate parity. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 33 } chanParamPageWait OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Page Wait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to continue sending data (by entering Q). A value of 0 disables the page wait facility. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 34 } chanParamForce OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Force. The ASCII character which will force data forwarding, 0 disables forced data forwarding. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 35 } chanParamBreakChar OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "Break Character. The ASCII character in decimal which is used to simulate a BREAK signal. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, IP, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 36 } chanParamNetworkParity OBJECT-TYPE SYNTAX INTEGER { even(1), odd(2), mark(4), spac(8), none(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Network Parity. With the Terminal type set to ASYN+X28, the parity can be forced onto the network side by selecting the approriate value. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 37 } chanParamEscapeDelay OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before being forwarded. During this time the ECHO facility is turned off, and is only restored when the delay timer has expired. Applicable: X25, HDLC, CONS, ILAN, XLAN, SDLC, QLLC, DLC and TERM controller types" REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::={ chanParamEntry 38 } chanParamStationAddress OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Station Address. Physical Unit Address of the Cluster Controller. Applicable: SDLC, QLLC and DLC controller types" REFERENCE "SDLC QLLC DLC" ::={ chanParamEntry 39 } chanParamProvideXID OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Provide XID. ???? Applicable: SDLC, QLLC and DLC controller types" REFERENCE "SDLC QLLC DLC" ::={ chanParamEntry 40 } chanParamMode OBJECT-TYPE SYNTAX INTEGER { none(1), path(2), push(3), pull(5), stop(9), auto(17), auto-pull-path-push-stop(32), sym(33), data(65), wait(81), hub(97), resp(129), sat(193) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode. This parameter provides a number of additional connection facilities for channels on virtual controllers. The options available are of an additive nature, the valid options and their integer values are: Option Integer Value DATA ?? RESP ?? SYM ?? AUTO ?? PATH ?? PUSH ?? PULL ?? STOP ?? NONE ?? Applicable: NMS, V25B, MULT, MAP and SRU controller types" REFERENCE "MAP MULT NMS SRU V25B" ::={ chanParamEntry 41 } chanParamPortMatch OBJECT-TYPE SYNTAX INTEGER { no(1), source(2), destination(129), wild(137) } ACCESS read-write STATUS mandatory DESCRIPTION "Port Match. This parameter optionally allows the Source and Destination ports to be used in conjunction with the IP address for routing. Applicable: IP controller type only" REFERENCE "IP TIP" ::={ chanParamEntry 42 } chanParamReverseTelnetPort OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Reverse Telnet Port. The port number which will respond to TELNET open requests. The default value for TELNET ports is '23'. Applicable: IP controller type only" REFERENCE "IP TIP" ::={ chanParamEntry 43 } chanParamBroadcastFilterTimer OBJECT-TYPE SYNTAX INTEGER (0..12000) ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast Filter Timer. ????? Applicable: LAN and TLAN controller types" REFERENCE "ESIS IPX TIPX LAN TLAN" ::={ chanParamEntry 44 } chanParamInhibitLearning OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inhibit Learning. This parameter determines whether the 'bridge' will work in Directed or Learning mode. If InhibitLearning is set to 'Yes' then the bridge will only forward frames whose addresses are fixed in the forwarding table. Applicable: LAN and TLAN controller types" REFERENCE "ESIS IPX TIPX LAN TLAN" ::={ chanParamEntry 45 } chanParamRetainSession OBJECT-TYPE SYNTAX INTEGER { notify(1), yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Retain Session. This parameter determines if and how a session will be cleared down when the call is cleared. The parameter is only applicable to channels (2) to (n). If set to NOTIFY or NO the session will be cleared when the call disconnects , NOTIFY will cause a NOTIFY RU to be sent indicating the disconnection. If this parameter is set to YES then the session will be retained on channel disconnection, this is used to provide a hot key switching facility. Applicable: CLUS controller type only" REFERENCE "CLUS" ::={ chanParamEntry 46 } chanParamPrinterType OBJECT-TYPE SYNTAX INTEGER { ibm(1), none(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Printer Type. If set to IBM the logical channel will act as an appication system printer, otherwise it operates in screen emulation mode. Only applicable to channels (2) to (n). Applicable: CLUS controller type only" REFERENCE "CLUS" ::={ chanParamEntry 47 } chanParamScreenPrinter OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Screen Printer. If set to YES, screen printer requests are to be processed and sent to this LU address (in this mode, the terminal attaching to this channel MUST have a printer attached). If set to NO, screen printing is supported via the LOCAL PRINTER or the DEFAULT LOCAL PRINTER parameters. Applicable: CLUS controller type only" REFERENCE "CLUS" ::={ chanParamEntry 48 } chanParamLocalPrinter OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "Local Printer. This parameter specifies the channel to which screen printing should be directed. It takes precedence over the value defined by the DEFAULT LOCAL PRINTER at controller level. This parameter may only be applied to channels (2) to (n). Applicable: CLUS controller type only" REFERENCE "CLUS" ::={ chanParamEntry 49 } chanParamBnnDsap OBJECT-TYPE SYNTAX INTEGER (0..254) ACCESS read-write STATUS mandatory DESCRIPTION "DSAP. The Destination Service Access Point. Applicable: NFRM controller type with SNA protocol encapsulation." REFERENCE " NFRM " ::={ chanParamEntry 50 } chanParamBnnSsap OBJECT-TYPE SYNTAX INTEGER (0..254) ACCESS read-write STATUS mandatory DESCRIPTION "SSAP. The Source Service Access Point. Applicable: NFRM controller type with SNA protocol encapsulation." REFERENCE " NFRM " ::={ chanParamEntry 51 } chanParamBnnPuTyp OBJECT-TYPE SYNTAX INTEGER { none(0), pu2-0(130), pu2-1(131) } ACCESS read-write STATUS mandatory DESCRIPTION "PU TYPE. IBM PU type. Applicable: NFRM controller type with SNA protocol encapsulation." REFERENCE "NFRM" ::={ chanParamEntry 52 } chanParamPriority OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Channel Priority. The internal priority which will be assigned to the channel. Data from the channel with the highest priority i.e. 1 will overtake data of from less priority channels on the same DLCI. Applicable: NFRM controller type." REFERENCE "NFRM" ::={ chanParamEntry 53 } -- The X.25 File -- The X.25 File defines the X.25 address file used for switching / -- translation of X.25 call packets. This file applies to controller -- types ; X25 and XFRM. Note, where complex decision making -- routines are required for switching, translating and or alternate -- routing, this file can be complemented (or replaced) by the -- MegaPAC MACro file. x25FileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "X25 file size. The number of entries configured into the X25 file." ::= { x25File 1 } x25Table OBJECT-TYPE SYNTAX SEQUENCE OF X25Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of X.25 routing entries" ::= { x25File 2 } x25Entry OBJECT-TYPE SYNTAX X25Entry ACCESS not-accessible STATUS mandatory INDEX { x25Index } ::= { x25Table 1 } X25Entry ::= SEQUENCE { x25Index INTEGER, x25Name DisplayString, x25AddressGroup INTEGER, x25Address DisplayString, x25UserData DisplayString } x25Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The index to an individual X.25 entry" ::={ x25Entry 1 } x25Name OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. A 4 character name which is used to match on the 'NAME' parameter of the channel on which a call will be routed over the X.25 network." ::={ x25Entry 2 } x25AddressGroup OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Addr Grp. An integer used to partition the X.25 routing tables. Any match on a channel name will only take effect if the channel 'AddressGroup' parameter is set to the same value." ::={ x25Entry 3 } x25Address OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Address. The numeric address which is used to match on the incoming X.25 address in a call request packet." ::={ x25Entry 4 } x25UserData OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "User Data A text field in which Call User Data or Facilities may be placed. The user data will be inserted into call request packets generated by the MegaPAC." ::={ x25Entry 5 } -- The Name File -- The Name File is used to associate up to 8 characters service -- names (known as to the ASCII user) with 2 character resource names -- used by the MegaPAC for internal routing. The Name File can also -- be used to invoke terminal gateway emulation, such as, -- IBM 3270, ICL 7561, TCP-IP Telnet etc. nameFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Name File Size. The number of entries configured into the NAME file." ::= { nameFile 1 } nameTable OBJECT-TYPE SYNTAX SEQUENCE OF NameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of 'Name' entries." ::= { nameFile 2 } nameEntry OBJECT-TYPE SYNTAX NameEntry ACCESS not-accessible STATUS mandatory INDEX { nameIndex } ::= { nameTable 1 } NameEntry ::= SEQUENCE { nameIndex INTEGER, nameName DisplayString, nameDRCMask DisplayString, nameCallPriority INTEGER, nameBilling INTEGER, nameOptions INTEGER } nameIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The index into the name table." ::={ nameEntry 1 } nameName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. A string of up to 8 characters in length which is typed in by the network user in order to establish a connection to a specific resource." ::={ nameEntry 2 } nameDRCMask OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "DRC Mask. The four character resource (channel) name to which the call will be directed." ::={ nameEntry 3 } nameCallPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Call Priority. The internal call priority which will be assigned to the call." ::={ nameEntry 4 } nameBilling OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Billing If enabled, statistics relating to the call will be sent to the billing file." ::={ nameEntry 5 } nameOptions OBJECT-TYPE SYNTAX INTEGER { none(1), iso(2), prof(5), icl7561(9), teln(65), rev-teln(129), ppp(33), ppp-pap(49) } ACCESS read-write STATUS mandatory DESCRIPTION "Options Enables the appropriate terminal emulation options." ::={ nameEntry 6 } -- The Password File (NOT IMPLEMENTED CURRENTLY) -- The Password File is used to password protect ASCII resources -- i.e. either on input to a switched network, or as a outbound -- security gateway. For security reasons, only the size of the -- Password File can be displayed. In order to display or modify -- this file the MegaPAC's VCP must be accessed directly. passFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pass File Size. The number of entries configured into the PASSWORD file." ::= { passFile 1 } -- The Macro File -- The Macro File is a general purpose file that is used to define -- complex routing, filtering functions, and or emulation functions. macFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Mac File Size. The number of entries configured into the MAC file." ::= { macFile 1 } macTable OBJECT-TYPE SYNTAX SEQUENCE OF MacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of MAC entries" ::= { macFile 2 } macEntry OBJECT-TYPE SYNTAX MacEntry ACCESS not-accessible STATUS mandatory INDEX { macIndex } ::= { macTable 1 } MacEntry ::= SEQUENCE { macIndex INTEGER, macName DisplayString, macFunction INTEGER, macOptions INTEGER, macSelector DisplayString, macGenerator DisplayString } macIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. An index to an individual entry in the MAC table." ::={ macEntry 1 } macName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. The level 2 controller name to which this entry applies." ::={ macEntry 2 } macFunction OBJECT-TYPE SYNTAX INTEGER { nop(1), cad(2), dad(3), cud(4), else(5), fac(6), inse(16386), dele(16387), copy(16388), posn(16389), mark(16390), data(16391), eof(16392), ibeg(32769), iend(32770), obeg(32771), oend(32772), pu(32773), xid(32774), list(32775), mask(32776), sync(32777), tab(32778), rout(32781), nvmt(32782), add(32783), bar(32784), dhcp(32786), time(32785), dpr(8), cpr(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Function. The function field determines what action should be taken if their is a match on this entry." ::={ macEntry 3 } macOptions OBJECT-TYPE SYNTAX INTEGER { tlat(99), rej (2), tcal(3), iso (4), cad (5), thru(6), talk(7), bill(8), ccit-1980(9), expe(10), jump(11), copy(12), none(1), wipx(161), sap(133), y13(65), disc(8193), not(129)} ACCESS read-write STATUS mandatory DESCRIPTION "Options. Specific actions that may be envoked in conjunction with the function field." ::={ macEntry 4 } macSelector OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Selector. This field can contain a string of between 0 and 32 Hexadecimal characters, that must be matched by the Function DAD, CAD, CUD or FAC." ::={ macEntry 5 } macGenerator OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Generator. This field can contain a string of between 0 and 32 Hexadecimal characters, and can have different purposes depending on the Function or Options fields." ::={ macEntry 6 } -- The ILAN File -- The ILAN File is used OSI TP0,2,3,4 applications where address -- mapping of TSAPs (Transport Service Access Points) is required -- e.g. mapping between TP4 to X25 or IBM 3270 LU sessions etc. ilanFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Ilan File Size. The number of entries configured into the ILAN file." ::= { ilanFile 1 } ilanTable OBJECT-TYPE SYNTAX SEQUENCE OF IlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of ILAN entries" ::= { ilanFile 2 } ilanEntry OBJECT-TYPE SYNTAX IlanEntry ACCESS not-accessible STATUS mandatory INDEX { ilanIndex } ::= { ilanTable 1 } IlanEntry ::= SEQUENCE { ilanIndex INTEGER, ilanName DisplayString, ilanOptions INTEGER, ilanEthernetAddress DisplayString, ilanTSAP DisplayString } ilanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. An index to an individual entry in the ILAN table." ::={ ilanEntry 1 } ilanName OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Name. The Resource which this entry applies to." ::={ ilanEntry 2 } ilanOptions OBJECT-TYPE SYNTAX INTEGER { iso(1), expe(2), none(3), y13(16), dbit(4), talk(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Options ISO Allows transport calls to be set up on the outgoing channel. EXPE Allows expedited data to be sent." ::={ ilanEntry 3 } ilanEthernetAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) ACCESS read-write STATUS mandatory DESCRIPTION "Ethernet Address. The destination MAC address of the named host." ::={ ilanEntry 4 } ilanTSAP OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "TSAP. The Transport Service Access Point required on the destination Host." ::={ ilanEntry 5 } -- The Error Log File -- The Error Log File is used to store any error conditions detected -- by the MegaPAC. elogFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elog File Size. The size of the error log file." ::= { elogFile 1 } elogTable OBJECT-TYPE SYNTAX SEQUENCE OF ElogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Error Log entries." ::= { elogFile 2 } elogEntry OBJECT-TYPE SYNTAX ElogEntry ACCESS not-accessible STATUS mandatory INDEX { elogIndex } ::= { elogTable 1 } ElogEntry ::= SEQUENCE { elogIndex INTEGER, elogRecord DisplayString } elogIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The index to an Error Log entry." ::={ elogEntry 1 } elogRecord OBJECT-TYPE SYNTAX DisplayString (SIZE(128)) ACCESS read-only STATUS mandatory DESCRIPTION "Record. The Error Log entry in ascii format." ::={ elogEntry 2 } -- TRAPS errorLogReport TRAP-TYPE ENTERPRISE sat -- VARIABLES { elogRecord } DESCRIPTION "Record. The Error Log entry in ascii format" ::= 0 -- The Bill File -- -- -- -- -- billFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bill File Size. The number of entries configured into the BILL file." ::= { billFile 1 } billTable OBJECT-TYPE SYNTAX SEQUENCE OF BillEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of 'Bill' entries." ::= { billFile 2 } billEntry OBJECT-TYPE SYNTAX BillEntry ACCESS not-accessible STATUS mandatory INDEX { billIndex } ::= { billTable 1 } BillEntry ::= SEQUENCE { billIndex INTEGER, billPass DisplayString, billDay INTEGER, billMonth INTEGER, billYear INTEGER, billHour INTEGER, billMins INTEGER, billCause INTEGER, billDiagn INTEGER, billRev INTEGER, billCallm INTEGER, billCalls INTEGER, billCname DisplayString, billRname DisplayString, billPrx DisplayString, billPtx DisplayString, billCrx DisplayString, billCtx DisplayString } billIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index. The index into the bill table." ::={ billEntry 1 } billPass OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Password A string of up to 8 characters in length which is typed in by the network user in order to establish a connection to a specific resource." ::={ billEntry 2 } billDay OBJECT-TYPE SYNTAX INTEGER (0..31) ACCESS read-write STATUS mandatory DESCRIPTION "DAY" ::={ billEntry 3 } billMonth OBJECT-TYPE SYNTAX INTEGER (0..12) ACCESS read-write STATUS mandatory DESCRIPTION "Month " ::={ billEntry 4 } billYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "YEAR" ::={ billEntry 5 } billHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Hour" ::={ billEntry 6 } billMins OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Mins" ::={ billEntry 7 } billCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cause" ::={ billEntry 8 } billDiagn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Diagn" ::={ billEntry 9 } billRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Rev" ::={ billEntry 10} billCallm OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Callm" ::={ billEntry 11} billCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Calls" ::={ billEntry 12} billCname OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Cname" ::={ billEntry 13} billRname OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Rname" ::={ billEntry 14} billPrx OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Prx" ::={ billEntry 15} billPtx OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Ptx" ::={ billEntry 16} billCrx OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Crx" ::={ billEntry 17} billCtx OBJECT-TYPE SYNTAX DisplayString (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "Ctx" ::={ billEntry 18} END