-- @(\#)A1100NMS mib, 3DJ 50000 AAAA ICS009, R2.9.00.09, Thu Mar 4 15:03:31 EST 1999 -------------------------------------------------------------------------------- -- -- -- The information in this file is subject to change without notice and -- -- should not be construed as a commitment by Alcatel Data Networks. -- -- -- -- Copyright 1995, 1996 by Alcatel Data Networks, -- -- all rights reserved -- -- -- -- Alcatel Data Networks owns and retains all right, title and interest -- -- in and to this software. This software constitutes Alcatel Data -- -- Networks' proprietary information and intellectual property, and no -- -- part or parts hereof shall be reproduced, translated, stored in any -- -- electronic retrieval system or transmitted, in any form or by any means -- -- (electronic, mechanical, photocopying, recording, or otherwise), without -- -- the prior permission of Alcatel Data Networks, other than as necessary -- -- in connection with the management of Alcatel Data Networks products. -- -- -- -------------------------------------------------------------------------------- -- automatically generated by mosy R2.1.0.03 (ADN version), do not edit! ADN-MIB DEFINITIONS ::= BEGIN IMPORTS AutonomousType FROM RFC1316-MIB TRAP-TYPE FROM RFC-1215 PhysAddress FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 enterprises, Counter, Gauge, IpAddress FROM RFC1155-SMI atmfCESCbrIndex FROM ATMF-CES atmVclVci, atmVclVpi, atmVplVpi FROM ATM-MIB dsx1LineIndex FROM RFC1406-MIB dsx3LineIndex FROM RFC1407-MIB frPVCEndptDLCIIndex FROM FRNETSERV-MIB ifAdminStatus, ifOperStatus, ifName, ifIndex, InterfaceIndex FROM IF-MIB contextEntry, partyIndex FROM SNMPv2-PARTY-MIB TimeStamp, TruthValue, RowStatus, DisplayString FROM SNMPv2-TC Integer32 FROM SNMPv2-SMI; alcatel OBJECT IDENTIFIER ::= { enterprises 637 } adn OBJECT IDENTIFIER ::= { alcatel 3 } -- created from adnMIB (9903040000Z) adnMIB OBJECT IDENTIFIER ::= { adn 1 } adnVersion OBJECT IDENTIFIER ::= { adnMIB 1 } adnEquipment OBJECT IDENTIFIER ::= { adnMIB 2 } adnExperimental OBJECT IDENTIFIER ::= { adnMIB 3 } adnExtensions OBJECT IDENTIFIER ::= { adnMIB 4 } adnProprietary OBJECT IDENTIFIER ::= { adnMIB 5 } adnMIBTraps OBJECT IDENTIFIER ::= { adnMIB 6 } adnMIBConformance OBJECT IDENTIFIER ::= { adnMIB 7 } adnEnvironment OBJECT IDENTIFIER ::= { adnMIB 8 } adnErrors OBJECT IDENTIFIER ::= { adnMIB 9 } adnTpxAgent OBJECT IDENTIFIER ::= { adnVersion 1 } adnHssAgent OBJECT IDENTIFIER ::= { adnVersion 2 } adnPsxAcxAgent OBJECT IDENTIFIER ::= { adnVersion 3 } adnNmsVpnAgent OBJECT IDENTIFIER ::= { adnVersion 4 } adnNode OBJECT IDENTIFIER ::= { adnEquipment 1 } adnCard OBJECT IDENTIFIER ::= { adnEquipment 2 } adnInterface OBJECT IDENTIFIER ::= { adnEquipment 3 } adnProcessor OBJECT IDENTIFIER ::= { adnEquipment 4 } adnChassis OBJECT IDENTIFIER ::= { adnEquipment 5 } adnAeiPort OBJECT IDENTIFIER ::= { adnEquipment 6 } adnIosPort OBJECT IDENTIFIER ::= { adnEquipment 7 } adnApplique OBJECT IDENTIFIER ::= { adnEquipment 8 } adn3rdPartyInterface OBJECT IDENTIFIER ::= { adnEquipment 9 } adnTp4900 OBJECT IDENTIFIER ::= { adnNode 1 } adnTp8000 OBJECT IDENTIFIER ::= { adnNode 2 } adnTp4800 OBJECT IDENTIFIER ::= { adnNode 3 } adnTp3000 OBJECT IDENTIFIER ::= { adnNode 4 } adnHSS OBJECT IDENTIFIER ::= { adnNode 5 } adnHSS1X OBJECT IDENTIFIER ::= { adnNode 6 } adnPsx OBJECT IDENTIFIER ::= { adnNode 7 } adnAcx OBJECT IDENTIFIER ::= { adnNode 8 } adnHSS400 OBJECT IDENTIFIER ::= { adnHSS 1 } adnHSS700 OBJECT IDENTIFIER ::= { adnHSS 2 } adnHSSChassis OBJECT IDENTIFIER ::= { adnChassis 5 } adn3Coupler OBJECT IDENTIFIER ::= { adnHSSChassis 1 } adn8Coupler OBJECT IDENTIFIER ::= { adnHSSChassis 2 } adn12Coupler OBJECT IDENTIFIER ::= { adnHSSChassis 3 } adnLpu OBJECT IDENTIFIER ::= { adnCard 1 } adnMsc OBJECT IDENTIFIER ::= { adnCard 2 } adnHsc OBJECT IDENTIFIER ::= { adnCard 3 } adnIwc OBJECT IDENTIFIER ::= { adnCard 4 } adnAse OBJECT IDENTIFIER ::= { adnCard 5 } adnCu OBJECT IDENTIFIER ::= { adnCard 6 } adnHbsac OBJECT IDENTIFIER ::= { adnCard 7 } adn3rdParty OBJECT IDENTIFIER ::= { adnCard 8 } adnPsxCard OBJECT IDENTIFIER ::= { adnCard 9 } adnAcxCard OBJECT IDENTIFIER ::= { adnCard 10 } adnSync OBJECT IDENTIFIER ::= { adnCard 11 } adnHbcp8 OBJECT IDENTIFIER ::= { adnMsc 1 } adnHb2t1 OBJECT IDENTIFIER ::= { adnMsc 2 } adnHb2e1 OBJECT IDENTIFIER ::= { adnMsc 3 } adnHb8ce OBJECT IDENTIFIER ::= { adnMsc 4 } adnHb8ct OBJECT IDENTIFIER ::= { adnMsc 5 } adnHb8cu OBJECT IDENTIFIER ::= { adnMsc 6 } adnHb8t1 OBJECT IDENTIFIER ::= { adnMsc 7 } adnHb8e1 OBJECT IDENTIFIER ::= { adnMsc 8 } adnBbe3b OBJECT IDENTIFIER ::= { adnHsc 1 } adnBbe3b3 OBJECT IDENTIFIER ::= { adnBbe3b 1 } adnBbt3b OBJECT IDENTIFIER ::= { adnHsc 2 } adnBbt3b3 OBJECT IDENTIFIER ::= { adnBbt3b 1 } adnBbs1b OBJECT IDENTIFIER ::= { adnHsc 3 } adnBbs1b3 OBJECT IDENTIFIER ::= { adnBbs1b 1 } adnBbe1b OBJECT IDENTIFIER ::= { adnHsc 4 } adnBbt1b OBJECT IDENTIFIER ::= { adnHsc 5 } adnBbs1b2 OBJECT IDENTIFIER ::= { adnHsc 6 } adnBbs1b4 OBJECT IDENTIFIER ::= { adnBbs1b2 1 } adnBbt3b2 OBJECT IDENTIFIER ::= { adnHsc 7 } adnBbt3b4 OBJECT IDENTIFIER ::= { adnBbt3b2 1 } adnHbcet OBJECT IDENTIFIER ::= { adnHsc 8 } adnHbcee OBJECT IDENTIFIER ::= { adnHsc 9 } adnHbceu OBJECT IDENTIFIER ::= { adnHsc 10 } adnBbs4b OBJECT IDENTIFIER ::= { adnHsc 11 } adnBbs4b2 OBJECT IDENTIFIER ::= { adnHsc 12 } adnBbts1c OBJECT IDENTIFIER ::= { adnHsc 13 } adnBbtp3c OBJECT IDENTIFIER ::= { adnHsc 14 } adnHbcig1 OBJECT IDENTIFIER ::= { adnIwc 1 } adnHbcigr OBJECT IDENTIFIER ::= { adnIwc 2 } adnHbcig3 OBJECT IDENTIFIER ::= { adnIwc 3 } adnHbcig4 OBJECT IDENTIFIER ::= { adnIwc 4 } adnNb41b OBJECT IDENTIFIER ::= { adnCu 1 } adnNb51b OBJECT IDENTIFIER ::= { adnCu 2 } adnBbase3 OBJECT IDENTIFIER ::= { adnAse 1 } adnBbaseb OBJECT IDENTIFIER ::= { adnBbase3 1 } adnBbaseb1 OBJECT IDENTIFIER ::= { adnBbase3 2 } adnBbsyn OBJECT IDENTIFIER ::= { adnSync 1 } adnCiscoIr OBJECT IDENTIFIER ::= { adn3rdParty 1 } adnHb2et OBJECT IDENTIFIER ::= { adnCiscoIr 1 } adnHb2tr OBJECT IDENTIFIER ::= { adnCiscoIr 2 } adnTelogyVs OBJECT IDENTIFIER ::= { adn3rdParty 2 } adnHbvss8 OBJECT IDENTIFIER ::= { adnTelogyVs 1 } adnHbvss16 OBJECT IDENTIFIER ::= { adnTelogyVs 2 } adnPac OBJECT IDENTIFIER ::= { adnAcxCard 1 } adnLac4 OBJECT IDENTIFIER ::= { adnAcxCard 2 } adnLac8 OBJECT IDENTIFIER ::= { adnAcxCard 3 } adnAcx8 OBJECT IDENTIFIER ::= { adnAcxCard 4 } adnCs OBJECT IDENTIFIER ::= { adnPsxCard 1 } adnCbs OBJECT IDENTIFIER ::= { adnPsxCard 2 } adnUtr OBJECT IDENTIFIER ::= { adnPsxCard 3 } adnFtd OBJECT IDENTIFIER ::= { adnPsxCard 4 } adnCtuj OBJECT IDENTIFIER ::= { adnPsxCard 5 } adnMc4 OBJECT IDENTIFIER ::= { adnPsxCard 6 } adnCbx OBJECT IDENTIFIER ::= { adnPsxCard 7 } adnDcFtd OBJECT IDENTIFIER ::= { adnPsxCard 8 } adnDclmg OBJECT IDENTIFIER ::= { adnPsxCard 9 } adnCts OBJECT IDENTIFIER ::= { adnPsxCard 10 } adnCmic OBJECT IDENTIFIER ::= { adnPsxCard 11 } adnCtj64 OBJECT IDENTIFIER ::= { adnPsxCard 12 } adnAcTuj OBJECT IDENTIFIER ::= { adnPsxCard 13 } adnDcv35 OBJECT IDENTIFIER ::= { adnPsxCard 14 } adnDcv11 OBJECT IDENTIFIER ::= { adnPsxCard 15 } adnAcj64 OBJECT IDENTIFIER ::= { adnPsxCard 16 } adnImc OBJECT IDENTIFIER ::= { adnPsxCard 17 } adnCts1 OBJECT IDENTIFIER ::= { adnPsxCard 18 } adnCts2 OBJECT IDENTIFIER ::= { adnPsxCard 19 } adnCtas OBJECT IDENTIFIER ::= { adnPsxCard 20 } adnCts1b OBJECT IDENTIFIER ::= { adnPsxCard 21 } adnCUMain OBJECT IDENTIFIER ::= { adnProcessor 1 } adnOM OBJECT IDENTIFIER ::= { adnProcessor 2 } adnXP OBJECT IDENTIFIER ::= { adnProcessor 3 } adnET OBJECT IDENTIFIER ::= { adnProcessor 4 } adnAX OBJECT IDENTIFIER ::= { adnProcessor 5 } adnSE OBJECT IDENTIFIER ::= { adnProcessor 6 } adnSY OBJECT IDENTIFIER ::= { adnProcessor 7 } adnTransmission OBJECT IDENTIFIER ::= { adnExtensions 10 } adnIfMIB OBJECT IDENTIFIER ::= { adnExtensions 31 } adnTrapsCommon OBJECT IDENTIFIER ::= { adnMIBTraps 1 } adnTrapsFrameRelay OBJECT IDENTIFIER ::= { adnMIBTraps 2 } adnTrapsATM OBJECT IDENTIFIER ::= { adnMIBTraps 3 } adnTrapsTDM OBJECT IDENTIFIER ::= { adnMIBTraps 4 } adnTrapVars OBJECT IDENTIFIER ::= { adnMIBTraps 5 } adnTrapsPsxAcx OBJECT IDENTIFIER ::= { adnMIBTraps 6 } adnProtocols OBJECT IDENTIFIER ::= { adnProprietary 4 } adnNmsVpn OBJECT IDENTIFIER ::= { adnProprietary 21 } adnEnvTp4900 OBJECT IDENTIFIER ::= { adnEnvironment 1 } adnEnvTp8000 OBJECT IDENTIFIER ::= { adnEnvironment 2 } adnEnvTp4800 OBJECT IDENTIFIER ::= { adnEnvironment 3 } adnEnvTp3000 OBJECT IDENTIFIER ::= { adnEnvironment 4 } adnEnvHss OBJECT IDENTIFIER ::= { adnEnvironment 5 } adnEnvPsx OBJECT IDENTIFIER ::= { adnEnvironment 6 } adnEnvAcx OBJECT IDENTIFIER ::= { adnEnvironment 7 } adnUCNodeErrors OBJECT IDENTIFIER ::= { adnErrors 1 } AdnEquipType ::= INTEGER { other(1), node(2), card(3), interface(4), chassis(5), processor(6), iosPort(7), aeiPort(8) } AdnCongestLevels ::= INTEGER { noconges(1), fecnbecn(2), drop2CIRcuf(3), discBe(4), discBeBcsnet(5), discBeBcsnetBcsusr(6), discBeBcsnetBcsusrBcusr(7), discBeBcsnetBcsusrBcusrBcnet(8), discBeBcsnetBcsusrBcusrBcnetUrg(9), notSignificant(10) } AdnPercent ::= INTEGER (-2147483648..2147483647) AdnEnableDisabled ::= INTEGER { enabled(1), disabled(2) } AdnEnabDisabConn ::= INTEGER { enableConn(1), disableConn(2), useServiceValue(3), useCardValue(4) } AdnFrtVCStates ::= INTEGER { no-calls(0), call-initiated(1), outgoing-call-proceeding(3), call-present(6), connect-request(8), callup(10), disconnect-request(11), disconnect-Indication(12), suspend-request(15), release-request(19) } AdnNodeTimeTicks ::= INTEGER AdnNodeTimeStamp ::= AdnNodeTimeTicks AdnUpdateState ::= INTEGER { committed(1), commit-in-progress(2), activated(3), activate-in-progress(4), activate-pending(5) } AdnRoutingID ::= INTEGER AdnCouplerIndex ::= INTEGER AdnEquipCause ::= INTEGER { none-value(1), other-reason(2), power-concern(4), fan-concern(8), temperature-concern(16), incorrect-type-of-board(32), incorrect-applique(64), absent-SAC-board(65), board-is-down(66), board-is-down-with-AEI-port-error(67), board-is-down-with-processor-error(68), board-returned-in-service(69), board-plugged-without-configuration(70), inaccessible-chassis(71), chassis-returned-in-service(72), hdlc-bus-driver-hardware-failure(73), hdlc-bus-connection-failure(74), board-is-down-after-NMGS-board-reset(75), board-is-down-after-NMS-board-reset(76), board-is-down-after-NMS-board-locking(77), board-unplugged(78), board-plugged(79), applique-absent(80), begin-of-board-hardware-test(100), end-of-board-hardware-test-without-error(101), end-of-board-hardware-test-with-error(102), hdlc-bus-hardware-failure-from-standby-CU(120), hdlc-bus-connection-failure-from-standby-CU(121), isl-bus-failure-from-standby-CU(122), unknown-state-from-standby-CU(123), wrong-HDLC-bus-cabling(124), standby-CU-configured-but-absent(200), board-aei-cabling-error(201), hardware-problem-on-LSN-link(202), hardware-problem-on-ISL(204), board-inaccessible-through-HDLC-bus(205), board-inaccessible-through-aei-link(206), cig-reset-after-bbase-plugging(207), board-going-out-of-supervision(208), board-entering-supervision(209), cu-version-error(210), cu-init-error(211), cu-hardware-error(212), cu-rebuild-error(213), board-is-down-due-to-hardware-key-reset(214), failure-of-on-board-49Mhz-oscillator(215), failure-of-on-board-3Mhz-NCO(216), loss-of-lock-in-3Mhz-phase-detector(217), loss-of-signal-52Mhz-VCXO(218), loss-of-signal-of-selected-52Mhz-reference(219), loss-of-lock-on-24Mhz-PLL(220), loss-of-lock-in-DS1-phase-detector(221), loss-of-DS1-clock-from-on-board-VCXO(222), inadvertent-reset-of-68331-microprocessor(223), oXo-oven-temperature-insufficiently-warm(224), loss-of-lock-in-2Mhz-phase-detector(225), loss-of-signal-on-2Mhz-reference-output(226), frequency-drift-outside-Stratum3E-limit(227), restart-for-other-reason(300), restart-on-NMS-request(301), restart-on-software-management-request(302), restart-on-HSS-internal-request(303), too-high-frequency-of-CU-restart(304), cu-switchover-with-hardware-key-down(305), cu-switchover-during-conf-processing(306) } AdnRoutingMetricType ::= INTEGER { nullMetric(1), hopCount(2), transitDelay(3), monetaryCost(4) } AdnRoutingCriteriaType ::= OBJECT IDENTIFIER adnRoutingCriteria OBJECT IDENTIFIER ::= { adnMIB 10 } AdnFrCos ::= INTEGER { cosRt(1), cosNrt(2) } AdnFrCosAdminStatus ::= INTEGER { unlocked(1), locked(2) } AdnFrCosOperStatus ::= INTEGER { unlocked(1), locked(2) } adnFrnetservMIB OBJECT IDENTIFIER ::= { adnTransmission 44 } adnFrChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is an extension of the Frame Relay Management Signalling Group table and the Frame Relay Logical Port Group table from RFC1604." ::= { adnFrnetservMIB 1 } adnFrChanEntry OBJECT-TYPE SYNTAX AdnFrChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the channel table. There will be one entry for each FRS (Frame Relay Service) channel configured." INDEX { ifIndex } ::= { adnFrChanTable 1 } AdnFrChanEntry ::= SEQUENCE { adnFrChanBAT AdnPercent, adnFrChanAccounting AdnEnableDisabled, adnFrChanStatistics AdnEnableDisabled, adnFrChanLineType INTEGER, adnFrChanCongsState AdnCongestLevels, adnFrChanProced INTEGER, adnFrChanVCTraps AdnEnableDisabled, adnFrChanNxOverBcs INTEGER (-2147483648..2147483647), adnFrChanNxOverBe INTEGER (-2147483648..2147483647), adnFrChanInCIR INTEGER (-2147483648..2147483647), adnFrChanInBc INTEGER (-2147483648..2147483647), adnFrChanInBcs INTEGER (-2147483648..2147483647), adnFrChanInBe INTEGER (-2147483648..2147483647), adnFrChanOutCIR INTEGER (-2147483648..2147483647), adnFrChanOutBc INTEGER (-2147483648..2147483647), adnFrChanOutBcs INTEGER (-2147483648..2147483647), adnFrChanOutBe INTEGER (-2147483648..2147483647), adnFrChanNumCallActive INTEGER (-2147483648..2147483647), adnFrChanDelaySensitive TruthValue, adnFrChanVCTypeConfigured INTEGER, adnFrChanPVCMaxNumAllowed INTEGER (-2147483648..2147483647), adnFrChanPVCBidirLow INTEGER (-2147483648..2147483647), adnFrChanPVCBidirHigh INTEGER (-2147483648..2147483647), adnFrChanSVCMaxNumAllowed INTEGER (-2147483648..2147483647), adnFrChanSVCBidirLow INTEGER (-2147483648..2147483647), adnFrChanSVCBidirHigh INTEGER (-2147483648..2147483647), adnFrChanSVCUserNetFlg INTEGER, adnFrChanSVCT303 INTEGER (-2147483648..2147483647), adnFrChanSVCT305 INTEGER (-2147483648..2147483647), adnFrChanSVCT308 INTEGER (-2147483648..2147483647), adnFrChanSVCT309 INTEGER (-2147483648..2147483647), adnFrChanSVCT310 INTEGER (-2147483648..2147483647), adnFrChanSVCT313 INTEGER (-2147483648..2147483647), adnFrChanSVCT315 INTEGER (-2147483648..2147483647), adnFrChanSVCT316 INTEGER (-2147483648..2147483647), adnFrChanSVCT317 INTEGER (-2147483648..2147483647), adnFrChanSVCT320 INTEGER (-2147483648..2147483647), adnFrChanSVCInCallBr AdnEnableDisabled, adnFrChanSVCOutCallBr AdnEnableDisabled, adnFrChanSVCAddrValid AdnEnableDisabled, adnFrChanSVCAddrLenIg INTEGER (-2147483648..2147483647), adnFrChanSVCMaxNumActive INTEGER (-2147483648..2147483647), adnFrChanSVCCurrentActive INTEGER (-2147483648..2147483647), adnFrChanSVCTotalProcessed INTEGER (-2147483648..2147483647), adnFrChanSVCFailedClrNet INTEGER (-2147483648..2147483647), adnFrChanSVCFailedClrDTE INTEGER (-2147483648..2147483647), adnFrChanSVCSuccessClrNet INTEGER (-2147483648..2147483647), adnFrChanSVCSuccessClrDTE INTEGER (-2147483648..2147483647), adnFrChanSVCMaxAggActCIR INTEGER (-2147483648..2147483647), adnFrChanPVCMaxAggActCIR INTEGER (-2147483648..2147483647), adnFrChanSVCMaxAggNormBe INTEGER (-2147483648..2147483647), adnFrChanPVCMaxAggNormBe INTEGER (-2147483648..2147483647), adnFrChanDefaultCos AdnFrCos, adnFrChanNumofMSN INTEGER (-2147483648..2147483647), adnFrChanNxMultiBc INTEGER (-2147483648..2147483647), adnFrChanMaxBcAllPVCs INTEGER (-2147483648..2147483647), adnFrChanMaxBcsAllPVCs INTEGER (-2147483648..2147483647), adnFrChanCosRtBcEgress INTEGER (-2147483648..2147483647), adnFrChanCosRtBcIngress INTEGER (-2147483648..2147483647), adnFrChanCosNrtBcEgress INTEGER (-2147483648..2147483647), adnFrChanCosNrtBcIngress INTEGER (-2147483648..2147483647), adnFrChanBwAllocated INTEGER (-2147483648..2147483647), adnFrChanBwAvail INTEGER (-2147483648..2147483647) } adnFrChanBAT OBJECT-TYPE SYNTAX AdnPercent -- UNITS Percent ACCESS read-only STATUS mandatory DESCRIPTION "This is the bandwidth allocation threshold for the channel. A value exceeding 80% is not recommended for sustained traffic loads. Common Name: BAT(%)" DEFVAL { 80 } ::= { adnFrChanEntry 1 } adnFrChanAccounting OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if accounting is enabled for the VCs on this channel. Common Name: Accounting" DEFVAL { enabled } ::= { adnFrChanEntry 2 } adnFrChanStatistics OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if statistics are enabled for this channel. When enabled, performance information is reported to the NMS. Common Name: Statistics" DEFVAL { enabled } ::= { adnFrChanEntry 3 } adnFrChanLineType OBJECT-TYPE SYNTAX INTEGER { other(1), fric(2), frad(3), frx(4), ip(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if this channel is a FRIC (frame relay interface code) or FRAD (frame relay assembler/disassembler) or a frx channel. FRIC allows devices to use the frame relay backbone with Q.922A frames. FRAD allows any HDLC-compatible device to use frame relay by encapsulating the HDLC frame with the required Q.922A frame. FRX allows PSX switches to connect to a HSS switch as a special access devices. IP (Internet Protocol) indicates this channel allows IP services. Common Name: Line Type" DEFVAL { fric } ::= { adnFrChanEntry 4 } adnFrChanCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the congestion level of this channel in the egress direction. Depending on the congestion level, some frames may be discarded. Frames are discarded according to a priority scheme. Note that an idle channel may also be classified as congested due to restricted internal resources. Common Name: Egress Congestion Level" ::= { adnFrChanEntry 5 } adnFrChanProced OBJECT-TYPE SYNTAX INTEGER { u2nnet(1), bidirect(2), u2nuser(50), other(51) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the LIS (local in-channel signalling) procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing user-to-network network-side procedures, bidirectional, user-to-network user-side procedures, or other. This object is configured and replaces frMgtVCSigProced, which is not configured. frMgtVCSigProced is readable via SNMP and mirrors this object. Common Name: LIS Interface" ::= { adnFrChanEntry 6 } adnFrChanVCTraps OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether or not VC-level traps and alarms are reported for this channel. If disabled, then no VC-level traps or alarms will be reported by any VC on this channel. Common Name: VC Traps" DEFVAL { enabled } ::= { adnFrChanEntry 7 } adnFrChanNxOverBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of times Bcs (statistically- committed data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Bcs" DEFVAL { 1 } ::= { adnFrChanEntry 9 } adnFrChanNxOverBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of times Be (excess burst data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Be" DEFVAL { 1 } ::= { adnFrChanEntry 10 } adnFrChanInCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the ingress CIR (committed information rate) of all calls that are active on this channel." ::= { adnFrChanEntry 11 } adnFrChanInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the ingress Bc (committed data rate) of all calls that are active on this channel." ::= { adnFrChanEntry 12 } adnFrChanInBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the ingress Bcs (statistically-committed data rate) of all calls that are active on this channel." ::= { adnFrChanEntry 13 } adnFrChanInBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the ingress Be (excess burst data rate) of all calls that are active on this channel." ::= { adnFrChanEntry 14 } adnFrChanOutCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the egress CIR (Committed Information Rate) of all calls that are active on this channel." ::= { adnFrChanEntry 15 } adnFrChanOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the egress Bc of all calls that are active on this channel." ::= { adnFrChanEntry 16 } adnFrChanOutBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the egress Bcs of all calls that are active on this channel." ::= { adnFrChanEntry 17 } adnFrChanOutBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the egress Be of all calls that are active on this channel." ::= { adnFrChanEntry 18 } adnFrChanNumCallActive OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This contains the number of calls that are active on this channel. This only includes calls that are in the data transfer state. The object adnFrVCOperState will be 'up(1)'." ::= { adnFrChanEntry 19 } adnFrChanDelaySensitive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether VCs set up on this channel are delay sensitive. If this field is set to 'true(1)' then path selection for all VCs on this channel will be based on the criterion (delay, monetary cost, hops). Otherwise the value of adnFrVCDelaySensitive for each VC will be used." DEFVAL { false } ::= { adnFrChanEntry 20 } adnFrChanVCTypeConfigured OBJECT-TYPE SYNTAX INTEGER { other(1), pvcOnly(2), svcOnly(3), pvcAndSvc(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the types of VCs allowed on this channel/port." DEFVAL { pvcOnly } ::= { adnFrChanEntry 21 } adnFrChanPVCMaxNumAllowed OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of PVCs that can be configured on the channel." DEFVAL { 976 } ::= { adnFrChanEntry 22 } adnFrChanPVCBidirLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used to indicate the lower number for the range of bi-directional PVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows PVCs on this channel and adnFrChanPVCMaxNumAllowed is greater than 0." DEFVAL { 16 } ::= { adnFrChanEntry 23 } adnFrChanPVCBidirHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used to indicate the higher number for the range of bi-directional PVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows PVCs on this channel and adnFrChanPVCMaxNumAllowed is greater than 0." DEFVAL { 991 } ::= { adnFrChanEntry 24 } adnFrChanSVCMaxNumAllowed OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of SVC user calls allowed on the channel." DEFVAL { 976 } ::= { adnFrChanEntry 25 } adnFrChanSVCBidirLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used to indicate the lower number for the range of bi-directional SVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows SVCs on this channel and adnFrChanSVCMaxNumAllowed is greater than 0." DEFVAL { 16 } ::= { adnFrChanEntry 26 } adnFrChanSVCBidirHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used to indicate the higher number for the range of bi-directional SVC DLCIs. This number is only valid if adnFrChanVCTypeConfigured allows SVCs on this channel and adnFrChanSVCMaxNumAllowed is greater than 0." DEFVAL { 991 } ::= { adnFrChanEntry 27 } adnFrChanSVCUserNetFlg OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the interface follows the user or network side of the protocol recommendations. Common Name: User/Network Protocol." DEFVAL { network } ::= { adnFrChanEntry 28 } adnFrChanSVCT303 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a setup response. If the timer expires, then the setup message is retransmitted. The timer value is expressed in seconds." REFERENCE "This timer specifies the amount of time to wait for a setup response. If the timer expires, then the setup message is retransmitted. The timer value is expressed in seconds." DEFVAL { 4 } ::= { adnFrChanEntry 29 } adnFrChanSVCT305 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a disconnect response. If the timer expires, then the release message is transmitted. The timer value is expressed in seconds." REFERENCE "This timer specifies the amount of time to wait for a disconnect response. If the timer expires, then the release message is transmitted. The timer value is expressed in seconds." DEFVAL { 30 } ::= { adnFrChanEntry 30 } adnFrChanSVCT308 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a release response. If the timer expires the first time, then the release message is retransmitted. The timer value is expressed in seconds." REFERENCE "This timer specifies the amount of time to wait for a release response. If the timer expires the first time, then the release message is retransmitted. The timer value is expressed in seconds." DEFVAL { 4 } ::= { adnFrChanEntry 31 } adnFrChanSVCT309 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This data link timer specifies the amount of time to wait for re-establishment of the LAPD (link access procedure on the D-channel) link. If the timer expires, all calls will be cleared. Otherwise, calls in stable states are not lost. The timer value is expressed in seconds." REFERENCE "This data link timer specifies the amount of time to wait for re-establishment of the LAPD (link access procedure on the D-channel) link. If the timer expires, all calls will be cleared. Otherwise, calls in stable states are not lost. The timer value is expressed in seconds." DEFVAL { 90 } ::= { adnFrChanEntry 32 } adnFrChanSVCT310 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a connect or disconnect after receiving a Call Proceeding. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." REFERENCE "This timer specifies the amount of time to wait for a connect or disconnect after receiving a Call Proceeding. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 10 } ::= { adnFrChanEntry 33 } adnFrChanSVCT313 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a connect response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 4 } ::= { adnFrChanEntry 34 } adnFrChanSVCT315 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a status inquiry response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrChanEntry 35 } adnFrChanSVCT316 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a restart response. If the timer expires, then the restart message is re-transmitted. The timer value is expressed in seconds." REFERENCE "This timer specifies the amount of time to wait for a restart response. If the timer expires, then the restart message is re-transmitted. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrChanEntry 36 } adnFrChanSVCT317 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "Reserved for future use. This restart confirm timer specifies the amount of time to wait for clearing all the calls. The timer value is expressed in seconds." REFERENCE "Reserved for future use. This restart confirm timer specifies the amount of time to wait for clearing all the calls. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrChanEntry 37 } adnFrChanSVCT320 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "Reserved for future use. This inactivity timer specifies the amount of time to wait for a response to a call. The timer value is expressed in seconds." REFERENCE "Reserved for future use. This inactivity timer specifies the amount of time to wait for a response to a call. The timer value is expressed in seconds." DEFVAL { 600 } ::= { adnFrChanEntry 38 } adnFrChanSVCInCallBr OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This specifies that call setup messages incoming to the DTE (from the frame relay network) are not allowed and will be cleared at the destination. Common Name: Incoming Calls Barred." DEFVAL { disabled } ::= { adnFrChanEntry 39 } adnFrChanSVCOutCallBr OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This specifies that call setup messages outgoing from the DTE (to the frame relay network) are not allowed and will be cleared at the source. Common Name: Outgoing Calls Barred." DEFVAL { disabled } ::= { adnFrChanEntry 40 } adnFrChanSVCAddrValid OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This specifies whether the calling party address in the setup message will be compared to the source channel address(es) and whether the connected number in the connect message will be compared to the destination channel address(es)." DEFVAL { disabled } ::= { adnFrChanEntry 41 } adnFrChanSVCAddrLenIg OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the number of least significant bits in the address field of the Q.933 SETUP/CONNECT message should be ignored." DEFVAL { 0 } ::= { adnFrChanEntry 42 } adnFrChanSVCMaxNumActive OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the count of the maximum number of SVCs active at one time." ::= { adnFrChanEntry 43 } adnFrChanSVCCurrentActive OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of the current number of active SVCs." ::= { adnFrChanEntry 44 } adnFrChanSVCTotalProcessed OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of the total number of SVCs that have been processed." ::= { adnFrChanEntry 45 } adnFrChanSVCFailedClrNet OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of failed SVCs that were cleared by the network." ::= { adnFrChanEntry 46 } adnFrChanSVCFailedClrDTE OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of failed SVCs that were cleared by the DTE." ::= { adnFrChanEntry 47 } adnFrChanSVCSuccessClrNet OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of successful SVCs cleared by the network." ::= { adnFrChanEntry 48 } adnFrChanSVCSuccessClrDTE OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Count of the successful SVCs cleared by the DTE." ::= { adnFrChanEntry 49 } adnFrChanSVCMaxAggActCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum aggregate CIR for active SVCs." ::= { adnFrChanEntry 50 } adnFrChanPVCMaxAggActCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum aggregate CIR for active PVCs." ::= { adnFrChanEntry 51 } adnFrChanSVCMaxAggNormBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum aggregate normalized Be (Bc/Tc) for active SVCs." ::= { adnFrChanEntry 52 } adnFrChanPVCMaxAggNormBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Maximum aggregate normalized Be (Bc/Tc) for active PVCs." ::= { adnFrChanEntry 53 } adnFrChanDefaultCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Class of Service (COS) for this channel. adnFrChanDefaultCos will be used for SVCs and all VCs received through a TPX Gateway. PVCs will use the COS defined in adnFrVCCos." DEFVAL { cosNrt } ::= { adnFrChanEntry 54 } adnFrChanNumofMSN OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the number of Multiple Subscriber Numbers (MSN) that can be configured on this channel." DEFVAL { 0 } ::= { adnFrChanEntry 55 } adnFrChanNxMultiBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the number of times Bc (committed data rate) can be over-subscribed for user traffic on this channel. Common Name: # Times Over Subscribe Bc" DEFVAL { 1 } ::= { adnFrChanEntry 56 } adnFrChanMaxBcAllPVCs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This field represents the maximum value of adnFrVCOutBc of all PVCs configured for the channel." ::= { adnFrChanEntry 57 } adnFrChanMaxBcsAllPVCs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This field represents the maximum value of adnFrPVCOutBcs of all PVCs configured for the channel." ::= { adnFrChanEntry 58 } adnFrChanCosRtBcEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed egress bandwidth for Class of Service (COS) 'cosRt(1)'. Common Name: COS Real Time Commit Egress" ::= { adnFrChanEntry 59 } adnFrChanCosRtBcIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed ingress bandwidth for Class of Service (COS) 'cosRt(1)'. Common Name: COS Real Time Bc Commit Ingress" ::= { adnFrChanEntry 60 } adnFrChanCosNrtBcEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed egress bandwidth for Class of Service (COS) 'cosNrt(2)'. Common Name: COS Non Real Time Bc Commit Egress" ::= { adnFrChanEntry 61 } adnFrChanCosNrtBcIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed ingress bandwidth for Class of Service (COS) 'cosNrt(2)'. Common Name: COS Non Real Time Bc Commit Ingress" ::= { adnFrChanEntry 62 } adnFrChanBwAllocated OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the bandwidth allocated to all VCs on this channel." ::= { adnFrChanEntry 63 } adnFrChanBwAvail OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the bandwidth available to this channel." ::= { adnFrChanEntry 64 } adnFrVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These are the PVC table extensions to the PVC End-Point table in RFC1604. This table is used for PVCs and SVCs." ::= { adnFrnetservMIB 2 } adnFrVCEntry OBJECT-TYPE SYNTAX AdnFrVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table entry." INDEX { ifIndex, frPVCEndptDLCIIndex } ::= { adnFrVCTable 1 } AdnFrVCEntry ::= SEQUENCE { adnFrVCRemNodeID AdnRoutingID, adnFrVCRemNumPlan INTEGER, adnFrVCRemPhysAddress PhysAddress, adnFrVCRemDlci INTEGER (-2147483648..2147483647), adnFrVCAdminState INTEGER, adnFrVCOperState INTEGER, adnFrVCTime AdnNodeTimeStamp, adnFrVCInBcs INTEGER (-2147483648..2147483647), adnFrVCOutBcs INTEGER (-2147483648..2147483647), adnFrVCUserOrNet INTEGER, adnFrVCLisDiscard INTEGER, adnFrVCRetryAttempts INTEGER (-2147483648..2147483647), adnFrVCFastRetry INTEGER (-2147483648..2147483647), adnFrVCSlowRetry INTEGER (-2147483648..2147483647), adnFrVCForcedPath AdnEnableDisabled, adnFrVCSourceDest INTEGER, adnFrVCFrameIN Counter, adnFrVCFrameOUT Counter, adnFrVCSubFrameIN Counter, adnFrVCSubFrameOUT Counter, adnFrVCBeInDiscards Counter, adnFrVCBcsInDiscards Counter, adnFrVCBcInDiscards Counter, adnFrVCBeOutDiscards Counter, adnFrVCBcsOutDiscards Counter, adnFrVCBcOutDiscards Counter, adnFrVCInCongsState AdnCongestLevels, adnFrVCDiscardLisIn Counter, adnFrVCNumRelinks Counter, adnFrVCNumNodes INTEGER (-2147483648..2147483647), adnFrVCType INTEGER, adnFrVCOutifIndex InterfaceIndex, adnFrVCOutDlci INTEGER (-2147483648..2147483647), adnFrVCISR INTEGER (-2147483648..2147483647), adnFrVCAttemptState INTEGER, adnFrVCStatistics INTEGER, adnFrVCAccounting INTEGER, adnFrVCUniqueConnID INTEGER (-2147483648..2147483647), adnFrVCLastClrCauseRX INTEGER (-2147483648..2147483647), adnFrVCLastClrDiagRX INTEGER (-2147483648..2147483647), adnFrVCLastClrCauseTX INTEGER (-2147483648..2147483647), adnFrVCLastClrDiagTX INTEGER (-2147483648..2147483647), adnFrVCRemoteifindex INTEGER (-2147483648..2147483647), adnFrPVCEndptXmitdSigStatus INTEGER (-2147483648..2147483647), adnFrVCInBc INTEGER (-2147483648..2147483647), adnFrVCOutBc INTEGER (-2147483648..2147483647), adnFrVCRemNodeMacNum INTEGER (-2147483648..2147483647), adnFrVCRemNodeAreaNum INTEGER (-2147483648..2147483647), adnFrVCDelaySensitive TruthValue, adnFrVCCos AdnFrCos, adnFrVCEndptDLCIIndex INTEGER (-2147483648..2147483647), adnFrVCEndptInMaxFrameSize INTEGER (-2147483648..2147483647), adnFrVCEndptInBc INTEGER (-2147483648..2147483647), adnFrVCEndptInBe INTEGER (-2147483648..2147483647), adnFrVCEndptInCIR INTEGER (-2147483648..2147483647), adnFrVCEndptOutMaxFrameSize INTEGER (-2147483648..2147483647), adnFrVCEndptOutBc INTEGER (-2147483648..2147483647), adnFrVCEndptOutBe INTEGER (-2147483648..2147483647), adnFrVCEndptOutCIR INTEGER (-2147483648..2147483647), adnFrVCEndptConnectIdentifier INTEGER (-2147483648..2147483647), adnFrVCEndptRowStatus RowStatus, adnFrVCEndptRcvdSigStatus INTEGER, adnFrVCEndptInFrames Counter, adnFrVCEndptOutFrames Counter, adnFrVCEndptInDEFrames Counter, adnFrVCEndptInExcessFrames Counter, adnFrVCEndptOutExcessFrames Counter, adnFrVCEndptInDiscards Counter, adnFrVCEndptInOctets Counter, adnFrVCEndptOutOctets Counter, adnFrVCBwAllocated INTEGER (-2147483648..2147483647), adnFrVCDescr DisplayString } adnFrVCRemNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This is the routing node ID of the destination node for this VC. It is an integer that ROUTES (HSS routing application) uses to route this call to the proper destination node. Common Name: Remote Node ID" ::= { adnFrVCEntry 1 } adnFrVCRemNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the numbering plan of the interface on the node at the remote end of the VC. Common Name: Remote Numbering Plan" DEFVAL { e164 } ::= { adnFrVCEntry 2 } adnFrVCRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is the address of the interface on the node at the remote end of the VC. The numbering plan for that interface is given by the value of adnFrVCRemNumPlan. Common Name: Remote address" ::= { adnFrVCEntry 3 } adnFrVCRemDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the DLCI (data link connection identifier) of this VC on the interface on the node at the remote end of the VC. Common Name: Remote DLCI" ::= { adnFrVCEntry 4 } adnFrVCAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of this call. Common Name: Status Administrative, Administrative" DEFVAL { up } ::= { adnFrVCEntry 5 } adnFrVCOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of this call. Common Name: Status Operational, Operational" ::= { adnFrVCEntry 6 } adnFrVCTime OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The time the VC was initialized. For a PVC, this is the time the PVC was configured. Common Name: Last Change" ::= { adnFrVCEntry 7 } adnFrVCInBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the Bcs (statistically-committed data rate) for ingress data. Common Name: Ingress Bcs" DEFVAL { 64000 } ::= { adnFrVCEntry 8 } adnFrVCOutBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the Bcs (statistically-committed data rate) for egress data. Common Name: Egress Bcs" DEFVAL { 64000 } ::= { adnFrVCEntry 9 } adnFrVCUserOrNet OBJECT-TYPE SYNTAX INTEGER { usercall(1), networkcall(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if this is a User or Network call. The priority given to each type of call's data in the network differs. Common Name: Type of Call" DEFVAL { usercall } ::= { adnFrVCEntry 10 } adnFrVCLisDiscard OBJECT-TYPE SYNTAX INTEGER { discard(1), nodiscard(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether FRS should discard ingress data if the LIS (Local In-channel Signalling) status for this PVC is inactive. If this is 'discard(1)' and the local or remote LIS status is down, then ingress data is discarded. If this is 'nodiscard(2)', then regardless of LIS status, the ingress data is not discarded. Common Name: LIS Discard Action" DEFVAL { discard } ::= { adnFrVCEntry 11 } adnFrVCRetryAttempts OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the number of PVC call attempts to make at the fast rate (adnFrVCFastRetry) before slowing the call attempt rate to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. The current attempt state is in adnFrVCAttemptState. Common Name: Fast Rate Retry" DEFVAL { 20 } ::= { adnFrVCEntry 12 } adnFrVCFastRetry OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed PVC setup attempts. After attempting this rate for adnFrVCRetryAttempts times, the rate will be slowed to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. Common Name: Fast Rate Retry Timer" DEFVAL { 30 } ::= { adnFrVCEntry 13 } adnFrVCSlowRetry OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed PVC setup attempts. After attempting the adnFrVCFastRetry rate for adnFrVCRetryAttempts times, the rate will be slowed to adnFrVCSlowRetry. This only has significance if adnFrVCSourceDest is 'source(1)'. Common Name: Slow Rate Retry Timer" DEFVAL { 255 } ::= { adnFrVCEntry 14 } adnFrVCForcedPath OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This specifies that this PVC has a forced path specified in the adnFrForceRoute table. If this object is set to 'enabled(1)' and there is no adnFrForceEntry for this PVC, then the PVC will be treated as if adnFrVCForcedPath has the value 'disabled(2)'. Common Name: Forced Path" DEFVAL { disabled } ::= { adnFrVCEntry 15 } adnFrVCSourceDest OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the call direction of this PVC. If it has the value 'source(1)', the FRS (frame relay Subscriber) subsystem will initiate the call. If it has the value 'destination(2)', FRS will wait for an incoming call request. Common Names: Source or Destination, Src/Dest" ::= { adnFrVCEntry 16 } adnFrVCFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the number of frames forwarded to the network for this VC. Note that the value of frPVCEndptInFrames from RFC1604 gives the frames received from the user. This counter does not include the 'dummy' frames generated by congestion control. It does include the DQ (data qualified) frames, used to exchange status information with the FRS subsystem at the remote end of a call. Common Name: Frame In" ::= { adnFrVCEntry 17 } adnFrVCFrameOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the number of frames received from the network for this VC. Note that the value of frPVCEndptOutFrames from RFC1604 gives the frames sent to the user. This counter does not include the number of 'dummy' frames generated by congestion control. It does include the DQ (data qualified) frames. Common Name: Frame Out" ::= { adnFrVCEntry 18 } adnFrVCSubFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the number of sub-frames forwarded to the network for this VC. Note that the value of frAccountPVCInSegments from RFC1604 gives the number of sub-frames received from the user. Common Name: Sub Frame In" ::= { adnFrVCEntry 19 } adnFrVCSubFrameOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the number of sub-frames received from the network for this VC. Note that the value of frAccountPVCOutSegments from RFC1604 gives the number of sub-frames sent to the user. Common Name: Sub Frames Out" ::= { adnFrVCEntry 20 } adnFrVCBeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress Be (excessive burst data rate) frames that were discarded at the interface due to network congestion. Common Name: Be Frame In Discards" ::= { adnFrVCEntry 21 } adnFrVCBcsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress Bcs (statistically- committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bcs Frame In Discards" ::= { adnFrVCEntry 22 } adnFrVCBcInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress Bc (committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bc Frame In Discards" ::= { adnFrVCEntry 23 } adnFrVCBeOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress Be (excessive burst data rate) frames that were discarded at the interface due to network congestion. Common Name: Be Frame Out Discards" ::= { adnFrVCEntry 24 } adnFrVCBcsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress Bcs (statistically- committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bcs Frame Out Discards" ::= { adnFrVCEntry 25 } adnFrVCBcOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress Bc (committed data rate) frames that were discarded at the interface due to network congestion. Common Name: Bc Frame Out Discards" ::= { adnFrVCEntry 26 } adnFrVCInCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the congestion level of this VC in the ingress direction. Depending on the congestion level, some frames from the user may be discarded. Frames are discarded according to a priority scheme. Note that an idle VC may also be classified as congested due to restricted internal resources. Common Name: Ingress Congestion Level" ::= { adnFrVCEntry 27 } adnFrVCDiscardLisIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress frames that were discarded because LIS (local in-channel signalling) declared the PVC inactive. This value will increment only if adnFrVCLisDiscard is set to 'discard(1)'. Common Name: Frames In Discarded (LIS down)" ::= { adnFrVCEntry 28 } adnFrVCNumRelinks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of times the call was successfully connected. Common Name: # of Successful Links" ::= { adnFrVCEntry 29 } adnFrVCNumNodes OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of nodes in the VC connection If adnFrVCOperState is 'up(1)', then this gives the current hop count. If the adnFrVCOperState is not 'up(1)', this this gives the hop count of the last connection." ::= { adnFrVCEntry 30 } adnFrVCType OBJECT-TYPE SYNTAX INTEGER { other(1), pvc(2), svc(3), mspvc(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the type of this connection: other, pvc ( permanent virtual connection ), svc ( switched virtual connection ) or mspvc ( multi-source permanent virtual connection ). Common Name: Type" DEFVAL { pvc } ::= { adnFrVCEntry 31 } adnFrVCOutifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the interface on which this VC exits this node away from this VC endpoint. It is usually a trunk interface." ::= { adnFrVCEntry 32 } adnFrVCOutDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the DLCI (data link connection identifier) of the VC on the interface on which it exits this node away from this VC endpoint. This can be combined with adnFrVCOutifIndex and used for call tracing." ::= { adnFrVCEntry 33 } adnFrVCISR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the initial submission rate (ISR) for ingress traffic. When the VC is determined to be idle in the ingress direction, the submission information rate (SIR) is set to the the ISR. Common Name: Initial Submission Rate" DEFVAL { 64000 } ::= { adnFrVCEntry 34 } adnFrVCAttemptState OBJECT-TYPE SYNTAX INTEGER { fast(1), slow(2), rxcall(3), callup(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This contains the current VC call attempt state. This will start out as 'fast(1)' or 'rxcall(3)' depending on adnFrVCSourceDest. If adnFrVCSourceDest has the value 'source(1)', and the call attempt fails adnFrVCRetryAttempt times, then the call will be attempted at the slow rate (adnFrVCSlowRetry) and this object will be set to 'slow(2)'. Common Name: Attempt State" ::= { adnFrVCEntry 35 } adnFrVCStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useChannelValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether statistics are enabled for this VC. If set to 'useChannelValue(3)', this VC uses the value specified by adnFrChanStatistics. Common Name: Statistics" DEFVAL { useChannelValue } ::= { adnFrVCEntry 36 } adnFrVCAccounting OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useChannelValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether accounting is enabled for this VC. If it has the value 'useChannelValue(3)', this VC uses the value specified by adnFrChanAccounting. Common Name: Accounting" DEFVAL { useChannelValue } ::= { adnFrVCEntry 37 } adnFrVCUniqueConnID OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a unique connection identifier for this VC. This value is exchanged with the remote FRS (Frame Relay Subscriber) at call setup time. Both the local and the remote ends of the VC will report this value in the accounting record." ::= { adnFrVCEntry 40 } adnFrVCLastClrCauseRX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the most recent clearing cause that was received from the network for this VC." ::= { adnFrVCEntry 42 } adnFrVCLastClrDiagRX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the most recent clearing diagnostic code that was received from the network for this VC." ::= { adnFrVCEntry 43 } adnFrVCLastClrCauseTX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the most recent clearing cause that was transmitted to the network for this VC." ::= { adnFrVCEntry 44 } adnFrVCLastClrDiagTX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the most recent clearing diagnostic code that was transmitted to the network for this VC." ::= { adnFrVCEntry 45 } adnFrVCRemoteifindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the interface on the node at the remote end of the VC. Together the objects adnFrVCRemNodeID, ifIndex, adnFrVCRemoteifindex, frPVCEndptDLCIIndex, adnFrVCRemDlci, and adnFrVCUniqueConnID uniquely identify VCs for accounting and statistics purposes." ::= { adnFrVCEntry 46 } adnFrPVCEndptXmitdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the PVC status sent via the local in-channel signaling procedures for this PVC end-point. If the logical port is performing only user-side procedures, or if the interface is inoperative, then this value should be 'none(4)'." ::= { adnFrVCEntry 47 } adnFrVCInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame relay network). This is a measure of the exclusively allocated trunk bandwidth required for the user's committed data. Common Name: Ingress Trunk Bc" DEFVAL { 64000 } ::= { adnFrVCEntry 48 } adnFrVCOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egress direction (out of the frame relay network). This is a measure of the exclusively allocated trunk bandwidth required for the user's committed data. Common Name: Egress Trunk Bc" DEFVAL { 64000 } ::= { adnFrVCEntry 49 } adnFrVCRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnFrVCRemNodeID, the routing node ID of the node at the remote endpoint of this frame relay VC." ::= { adnFrVCEntry 50 } adnFrVCRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnFrVCRemNodeID, the routing node ID of the node at the remote endpoint of this frame relay VC." ::= { adnFrVCEntry 51 } adnFrVCDelaySensitive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether the VC is delay sensitive. If either this field or adnFrChanDelaySensitive is set to 'true(1)', then path selection for the VC will be based on the criterion (delay, monetary cost, hops). Otherwise, path selection will be based on the criterion (monetary cost, delay, hops)." DEFVAL { false } ::= { adnFrVCEntry 52 } adnFrVCCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Class of Service (COS) for the PVC. SVCs and calls received through a TPX Gateway use the COS defined in adnFrChanDefaultCos." DEFVAL { cosNrt } ::= { adnFrVCEntry 53 } adnFrVCEndptDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptDLCIIndex." ::= { adnFrVCEntry 54 } adnFrVCEndptInMaxFrameSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInMaxFrameSize." ::= { adnFrVCEntry 55 } adnFrVCEndptInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBc." ::= { adnFrVCEntry 56 } adnFrVCEndptInBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBe." ::= { adnFrVCEntry 57 } adnFrVCEndptInCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInCIR." ::= { adnFrVCEntry 58 } adnFrVCEndptOutMaxFrameSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutMaxFrameSize." ::= { adnFrVCEntry 59 } adnFrVCEndptOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBc." ::= { adnFrVCEntry 60 } adnFrVCEndptOutBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBe." ::= { adnFrVCEntry 61 } adnFrVCEndptOutCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutCIR." ::= { adnFrVCEntry 62 } adnFrVCEndptConnectIdentifier OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptConnectIdentifier." ::= { adnFrVCEntry 63 } adnFrVCEndptRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptRowStatus." ::= { adnFrVCEntry 64 } adnFrVCEndptRcvdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptRcvdSigStatus." ::= { adnFrVCEntry 65 } adnFrVCEndptInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInFrames." ::= { adnFrVCEntry 66 } adnFrVCEndptOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutFrames." ::= { adnFrVCEntry 67 } adnFrVCEndptInDEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInDEFrames." ::= { adnFrVCEntry 68 } adnFrVCEndptInExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInExcessFrames." ::= { adnFrVCEntry 69 } adnFrVCEndptOutExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutExcessFrames." ::= { adnFrVCEntry 70 } adnFrVCEndptInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInDiscards." ::= { adnFrVCEntry 71 } adnFrVCEndptInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInOctets." ::= { adnFrVCEntry 72 } adnFrVCEndptOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutOctets." ::= { adnFrVCEntry 73 } adnFrVCBwAllocated OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the bandwidth allocated to this VC." ::= { adnFrVCEntry 74 } adnFrVCDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A textual string describing this VC. Common Name: Description" DEFVAL { ''H } ::= { adnFrVCEntry 75 } adnCMBfvcadnFrVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCMBfvcAdnFrVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These are the VC table extensions to the PVC End-Point table in RFC1604. This table is used for PVCs and SVCs." ::= { adnFrnetservMIB 3 } adnCMBfvcadnFrVCEntry OBJECT-TYPE SYNTAX AdnCMBfvcAdnFrVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table entry." INDEX { ifIndex, adnCMBfvcfrPVCEndptDLCIIndex } ::= { adnCMBfvcadnFrVCTable 1 } AdnCMBfvcAdnFrVCEntry ::= SEQUENCE { adnCMBfvcadnFrVCRemNodeID AdnRoutingID, adnCMBfvcadnFrVCRemNumPlan INTEGER, adnCMBfvcadnFrVCRemPhysAddress PhysAddress, adnCMBfvcadnFrVCRemDlci INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCAdminState INTEGER, adnCMBfvcadnFrVCOperState INTEGER, adnCMBfvcadnFrVCTime AdnNodeTimeStamp, adnCMBfvcadnFrVCInBcs INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCOutBcs INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCUserOrNet INTEGER, adnCMBfvcadnFrVCLisDiscard INTEGER, adnCMBfvcadnFrVCRetryAttempts INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCFastRetry INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCSlowRetry INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCForcedPath AdnEnableDisabled, adnCMBfvcadnFrVCSourceDest INTEGER, adnCMBfvcadnFrVCFrameIN Counter, adnCMBfvcadnFrVCFrameOUT Counter, adnCMBfvcadnFrVCSubFrameIN Counter, adnCMBfvcadnFrVCSubFrameOUT Counter, adnCMBfvcadnFrVCBeInDiscards Counter, adnCMBfvcadnFrVCBcsInDiscards Counter, adnCMBfvcadnFrVCBcInDiscards Counter, adnCMBfvcadnFrVCBeOutDiscards Counter, adnCMBfvcadnFrVCBcsOutDiscards Counter, adnCMBfvcadnFrVCBcOutDiscards Counter, adnCMBfvcadnFrVCInCongsState AdnCongestLevels, adnCMBfvcadnFrVCDiscardLisIn Counter, adnCMBfvcadnFrVCNumRelinks Counter, adnCMBfvcadnFrVCNumNodes INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCType INTEGER, adnCMBfvcadnFrVCOutifIndex InterfaceIndex, adnCMBfvcadnFrVCOutDlci INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCISR INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCAttemptState INTEGER, adnCMBfvcadnFrVCStatistics INTEGER, adnCMBfvcadnFrVCAccounting INTEGER, adnCMBfvcadnFrVCUniqueConnID INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCLastClrCauseRX INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCLastClrDiagRX INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCLastClrCauseTX INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCLastClrDiagTX INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCRemoteifindex INTEGER (-2147483648..2147483647), adnCMBfvcadnFrPVCEndptXmitdSigStatus INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCInBc INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCOutBc INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCRemNodeMacNum INTEGER (-2147483648..2147483647), adnCMBfvcadnFrVCRemNodeAreaNum INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptDLCIIndex INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptInMaxFrameSize INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptInBc INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptInBe INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptInCIR INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptOutMaxFrameSize INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptOutBc INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptOutBe INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptOutCIR INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptConnectIdentifier INTEGER (-2147483648..2147483647), adnCMBfvcfrPVCEndptRowStatus RowStatus, adnCMBfvcfrPVCEndptRcvdSigStatus INTEGER, adnCMBfvcfrPVCEndptInFrames Counter, adnCMBfvcfrPVCEndptOutFrames Counter, adnCMBfvcfrPVCEndptInDEFrames Counter, adnCMBfvcfrPVCEndptInExcessFrames Counter, adnCMBfvcfrPVCEndptOutExcessFrames Counter, adnCMBfvcfrPVCEndptInDiscards Counter, adnCMBfvcfrPVCEndptInOctets Counter, adnCMBfvcfrPVCEndptOutOctets Counter, adnCMBfvcadnFrVCDelaySensitive TruthValue, adnCMBfvcadnFrVCCos AdnFrCos, adnCMBfvcadnFrVCDescr DisplayString } adnCMBfvcadnFrVCRemNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNodeID." ::= { adnCMBfvcadnFrVCEntry 1 } adnCMBfvcadnFrVCRemNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNumPlan." ::= { adnCMBfvcadnFrVCEntry 2 } adnCMBfvcadnFrVCRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemPhysAddress." ::= { adnCMBfvcadnFrVCEntry 3 } adnCMBfvcadnFrVCRemDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemDlci." ::= { adnCMBfvcadnFrVCEntry 4 } adnCMBfvcadnFrVCAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCAdminState." ::= { adnCMBfvcadnFrVCEntry 5 } adnCMBfvcadnFrVCOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOperState." ::= { adnCMBfvcadnFrVCEntry 6 } adnCMBfvcadnFrVCTime OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCTime." ::= { adnCMBfvcadnFrVCEntry 7 } adnCMBfvcadnFrVCInBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBcs." ::= { adnCMBfvcadnFrVCEntry 8 } adnCMBfvcadnFrVCOutBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBcs." ::= { adnCMBfvcadnFrVCEntry 9 } adnCMBfvcadnFrVCUserOrNet OBJECT-TYPE SYNTAX INTEGER { usercall(1), networkcall(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUserOrNet." ::= { adnCMBfvcadnFrVCEntry 10 } adnCMBfvcadnFrVCLisDiscard OBJECT-TYPE SYNTAX INTEGER { discard(1), nodiscard(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCLisDiscard." ::= { adnCMBfvcadnFrVCEntry 11 } adnCMBfvcadnFrVCRetryAttempts OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRetryAttempts." ::= { adnCMBfvcadnFrVCEntry 12 } adnCMBfvcadnFrVCFastRetry OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCFastRetry." ::= { adnCMBfvcadnFrVCEntry 13 } adnCMBfvcadnFrVCSlowRetry OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSlowRetry." ::= { adnCMBfvcadnFrVCEntry 14 } adnCMBfvcadnFrVCForcedPath OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCForcedPath." ::= { adnCMBfvcadnFrVCEntry 15 } adnCMBfvcadnFrVCSourceDest OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSourceDest." ::= { adnCMBfvcadnFrVCEntry 16 } adnCMBfvcadnFrVCFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCFrameIN." ::= { adnCMBfvcadnFrVCEntry 17 } adnCMBfvcadnFrVCFrameOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCFrameOUT." ::= { adnCMBfvcadnFrVCEntry 18 } adnCMBfvcadnFrVCSubFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSubFrameIN." ::= { adnCMBfvcadnFrVCEntry 19 } adnCMBfvcadnFrVCSubFrameOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSubFrameOUT." ::= { adnCMBfvcadnFrVCEntry 20 } adnCMBfvcadnFrVCBeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBeInDiscards." ::= { adnCMBfvcadnFrVCEntry 21 } adnCMBfvcadnFrVCBcsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcsInDiscards." ::= { adnCMBfvcadnFrVCEntry 22 } adnCMBfvcadnFrVCBcInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcInDiscards." ::= { adnCMBfvcadnFrVCEntry 23 } adnCMBfvcadnFrVCBeOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBeOutDiscards." ::= { adnCMBfvcadnFrVCEntry 24 } adnCMBfvcadnFrVCBcsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcsOutDiscards." ::= { adnCMBfvcadnFrVCEntry 25 } adnCMBfvcadnFrVCBcOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcOutDiscards." ::= { adnCMBfvcadnFrVCEntry 26 } adnCMBfvcadnFrVCInCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInCongsState." ::= { adnCMBfvcadnFrVCEntry 27 } adnCMBfvcadnFrVCDiscardLisIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDiscardLisIn." ::= { adnCMBfvcadnFrVCEntry 28 } adnCMBfvcadnFrVCNumRelinks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumRelinks." ::= { adnCMBfvcadnFrVCEntry 29 } adnCMBfvcadnFrVCNumNodes OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumNodes." ::= { adnCMBfvcadnFrVCEntry 30 } adnCMBfvcadnFrVCType OBJECT-TYPE SYNTAX INTEGER { other(1), pvc(2), svc(3), mspvc(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCType." ::= { adnCMBfvcadnFrVCEntry 31 } adnCMBfvcadnFrVCOutifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutifIndex." ::= { adnCMBfvcadnFrVCEntry 32 } adnCMBfvcadnFrVCOutDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutDlci." ::= { adnCMBfvcadnFrVCEntry 33 } adnCMBfvcadnFrVCISR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCISR." ::= { adnCMBfvcadnFrVCEntry 34 } adnCMBfvcadnFrVCAttemptState OBJECT-TYPE SYNTAX INTEGER { fast(1), slow(2), rxcall(3), callup(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCAttemptState." ::= { adnCMBfvcadnFrVCEntry 35 } adnCMBfvcadnFrVCStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useChannelValue(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCStatistics." ::= { adnCMBfvcadnFrVCEntry 36 } adnCMBfvcadnFrVCAccounting OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useChannelValue(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCAccounting." ::= { adnCMBfvcadnFrVCEntry 37 } adnCMBfvcadnFrVCUniqueConnID OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUniqueConnID." ::= { adnCMBfvcadnFrVCEntry 40 } adnCMBfvcadnFrVCLastClrCauseRX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCLastClrCauseRX." ::= { adnCMBfvcadnFrVCEntry 42 } adnCMBfvcadnFrVCLastClrDiagRX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCLastClrDiagRX." ::= { adnCMBfvcadnFrVCEntry 43 } adnCMBfvcadnFrVCLastClrCauseTX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCLastClrCauseTX." ::= { adnCMBfvcadnFrVCEntry 44 } adnCMBfvcadnFrVCLastClrDiagTX OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCLastClrDiagTX." ::= { adnCMBfvcadnFrVCEntry 45 } adnCMBfvcadnFrVCRemoteifindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemoteifindex." ::= { adnCMBfvcadnFrVCEntry 46 } adnCMBfvcadnFrPVCEndptXmitdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrPVCEndptXmitdSigStatus." ::= { adnCMBfvcadnFrVCEntry 47 } adnCMBfvcadnFrVCInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBc." ::= { adnCMBfvcadnFrVCEntry 48 } adnCMBfvcadnFrVCOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBc." ::= { adnCMBfvcadnFrVCEntry 49 } adnCMBfvcadnFrVCRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNodeMacNum." ::= { adnCMBfvcadnFrVCEntry 50 } adnCMBfvcadnFrVCRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNodeAreaNum." ::= { adnCMBfvcadnFrVCEntry 51 } adnCMBfvcfrPVCEndptDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptDLCIIndex." ::= { adnCMBfvcadnFrVCEntry 52 } adnCMBfvcfrPVCEndptInMaxFrameSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInMaxFrameSize." ::= { adnCMBfvcadnFrVCEntry 53 } adnCMBfvcfrPVCEndptInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBc." ::= { adnCMBfvcadnFrVCEntry 54 } adnCMBfvcfrPVCEndptInBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBe." ::= { adnCMBfvcadnFrVCEntry 55 } adnCMBfvcfrPVCEndptInCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInCIR." ::= { adnCMBfvcadnFrVCEntry 56 } adnCMBfvcfrPVCEndptOutMaxFrameSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutMaxFrameSize." ::= { adnCMBfvcadnFrVCEntry 57 } adnCMBfvcfrPVCEndptOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBc." ::= { adnCMBfvcadnFrVCEntry 58 } adnCMBfvcfrPVCEndptOutBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBe." ::= { adnCMBfvcadnFrVCEntry 59 } adnCMBfvcfrPVCEndptOutCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutCIR." ::= { adnCMBfvcadnFrVCEntry 60 } adnCMBfvcfrPVCEndptConnectIdentifier OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptConnectIdentifier." ::= { adnCMBfvcadnFrVCEntry 61 } adnCMBfvcfrPVCEndptRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptRowStatus." ::= { adnCMBfvcadnFrVCEntry 62 } adnCMBfvcfrPVCEndptRcvdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptRcvdSigStatus." ::= { adnCMBfvcadnFrVCEntry 63 } adnCMBfvcfrPVCEndptInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInFrames." ::= { adnCMBfvcadnFrVCEntry 64 } adnCMBfvcfrPVCEndptOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutFrames." ::= { adnCMBfvcadnFrVCEntry 65 } adnCMBfvcfrPVCEndptInDEFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInDEFrames." ::= { adnCMBfvcadnFrVCEntry 66 } adnCMBfvcfrPVCEndptInExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInExcessFrames." ::= { adnCMBfvcadnFrVCEntry 67 } adnCMBfvcfrPVCEndptOutExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutExcessFrames." ::= { adnCMBfvcadnFrVCEntry 68 } adnCMBfvcfrPVCEndptInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInDiscards." ::= { adnCMBfvcadnFrVCEntry 69 } adnCMBfvcfrPVCEndptInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInOctets." ::= { adnCMBfvcadnFrVCEntry 70 } adnCMBfvcfrPVCEndptOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutOctets." ::= { adnCMBfvcadnFrVCEntry 71 } adnCMBfvcadnFrVCDelaySensitive OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDelaySensitive." ::= { adnCMBfvcadnFrVCEntry 72 } adnCMBfvcadnFrVCCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCCos." ::= { adnCMBfvcadnFrVCEntry 73 } adnCMBfvcadnFrVCDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDescr." DEFVAL { ''H } ::= { adnCMBfvcadnFrVCEntry 74 } adnFrForceRoute OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrForceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the forced path to be used for this PVC." ::= { adnFrnetservMIB 4 } adnFrForceEntry OBJECT-TYPE SYNTAX AdnFrForceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is one entry of the Forced Path table for the specified PVC." INDEX { ifIndex, frPVCEndptDLCIIndex, adnFrForceHop } ::= { adnFrForceRoute 1 } AdnFrForceEntry ::= SEQUENCE { adnFrForceHop INTEGER (-2147483648..2147483647), adnFrForceNode AdnRoutingID, adnFrForceFlag INTEGER, adnFrForceOutifindex INTEGER (-2147483648..2147483647), adnFrFrcNodeMacNum INTEGER (-2147483648..2147483647), adnFrFrcNodeAreaNum INTEGER (-2147483648..2147483647) } adnFrForceHop OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the hop indicator. The value is '1' in the source node and increments for each hop through the network." ::= { adnFrForceEntry 1 } adnFrForceNode OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This is the routing node ID of the next node in this forced path. It is required for every entry in the Forced Path table." ::= { adnFrForceEntry 2 } adnFrForceFlag OBJECT-TYPE SYNTAX INTEGER { preferred(1), required(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This flag indicates if this is the preferred or required path. If this flag is set to 'preferred(1)', and the interface designated by adnFrForceOutifindex is not available, then alternate interfaces are tried. If this is set to 'required(2)', and the designated interface is not available, then no additional interfaces are attempted and the call is cleared." DEFVAL { required } ::= { adnFrForceEntry 3 } adnFrForceOutifindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the ifIndex of the interface that the call should use when exiting this node. If adnFrForceFlag has the value 'required(2)', then this interface MUST be used. If adnFrForceFlag is set to 'preferred(1), an alternate interface can be used to get to the next node identified by adnFrForceNode if this interface is unavailable." ::= { adnFrForceEntry 4 } adnFrFrcNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of the adnFrForceNode, the routing node ID of the next node in this forced path." ::= { adnFrForceEntry 5 } adnFrFrcNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of the adnFrForceNode, the routing node ID of the next node in this forced path." ::= { adnFrForceEntry 6 } adnFrAccountVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrAccountVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Accounting MIB table. These are the counters that are reported in the FRS (Frame Relay Subscriber) accounting record." ::= { adnFrnetservMIB 5 } adnFrAccountVCEntry OBJECT-TYPE SYNTAX AdnFrAccountVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One instance of the FRS (Frame Relay Subscriber) accounting counters." INDEX { ifIndex, frPVCEndptDLCIIndex, adnFrAccountTariff } ::= { adnFrAccountVCTable 1 } AdnFrAccountVCEntry ::= SEQUENCE { adnFrAccountTariff INTEGER (-2147483648..2147483647), adnFrAccountInSegments Counter, adnFrAccountOutSegments Counter, adnFrAccountInFrames Counter, adnFrAccountOutFrames Counter, adnFrAccountInExcessFrames Counter, adnFrAccountOutExcessFrames Counter } adnFrAccountTariff OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the tariff period for these counters. A tariff period is a designated time period during which specified billing rates apply" ::= { adnFrAccountVCEntry 1 } adnFrAccountInSegments OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress sub-frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 2 } adnFrAccountOutSegments OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress sub-frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 3 } adnFrAccountInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 4 } adnFrAccountOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 5 } adnFrAccountInExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of ingress excess frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 6 } adnFrAccountOutExcessFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of egress excess frames in this reporting period for this VC." ::= { adnFrAccountVCEntry 7 } adnFrAccVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrAccVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table constitutes the FRS (Frame Relay Subscriber) accounting record. None of the objects in this table can be obtained via an SNMP GET command. These objects are visible only in an accounting record. Most of these objects duplicate objects in other tables. They are collected here to allow the accounting record to be sent as a single table to conserve space." ::= { adnFrnetservMIB 6 } adnFrAccVCEntry OBJECT-TYPE SYNTAX AdnFrAccVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One instance of the FRS (Frame Relay Subscriber) accounting record." INDEX { ifIndex, frPVCEndptDLCIIndex } ::= { adnFrAccVCTable 1 } AdnFrAccVCEntry ::= SEQUENCE { adnFrAccVCifName DisplayString, adnFrAccVCfrPVCEndptDLCIIndex INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCRemDlci INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCUniqueConnID INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCRemNodeID AdnRoutingID, adnFrAccVCfrLportNumPlan INTEGER, adnFrAccVCifPhysAddress PhysAddress, adnFrAccVCadnFrVCRemNumPlan INTEGER, adnFrAccVCadnFrVCRemPhysAddress PhysAddress, adnFrAccVCadnFrVCSourceDest INTEGER, adnFrAccVCadnFrVCNumRelinks INTEGER (-2147483648..2147483647), adnFrAccVCfrPVCEndptInCIR INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCInBc INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCInBcs INTEGER (-2147483648..2147483647), adnFrAccVCfrPVCEndptInBe INTEGER (-2147483648..2147483647), adnFrAccVCfrPVCEndptOutCIR INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCOutBc INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCOutBcs INTEGER (-2147483648..2147483647), adnFrAccVCfrPVCEndptOutBe INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCUserOrNet INTEGER, adnFrAccVCfrAccountPVCSegmentSize INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCType INTEGER, adnFrAccVCTimeEndAcct AdnNodeTimeStamp, adnFrAccVCTimeStartAcct AdnNodeTimeStamp, adnFrAccVCCallTerm INTEGER, adnFrAccVCadnFrChanLineType INTEGER, adnFrAccVCadnFrVCNumNodes INTEGER (-2147483648..2147483647), adnFrAccVCTableInSegments INTEGER (-2147483648..2147483647), adnFrAccVCTableInFrames INTEGER (-2147483648..2147483647), adnFrAccVCTableInExcessFrame INTEGER (-2147483648..2147483647), adnFrAccVCTableOutSegments INTEGER (-2147483648..2147483647), adnFrAccVCTableOutFrames INTEGER (-2147483648..2147483647), adnFrAccVCTableOutExcessFrame INTEGER (-2147483648..2147483647), adnFrAccVCPVCRegroomed TruthValue, adnFrAccVCSVCCallingPartyNum PhysAddress, adnFrAccVCSVCCalledPartyNum PhysAddress, adnFrAccVCSVCCallEstablished TruthValue, adnFrAccVCSVCQ933ClearingCause INTEGER (-2147483648..2147483647), adnFrAccVCSVCQ933ClearingLocation INTEGER (-2147483648..2147483647), adnFrAccVCCos AdnFrCos, adnFrAccVCadnFrVCLocalNodeID AdnRoutingID, adnFrAccVCadnFrVCDescr DisplayString, adnFrAccVCadnFrVCLocalifIndex INTEGER (-2147483648..2147483647), adnFrAccVCadnFrVCRemoteifIndex InterfaceIndex, adnFrAccVCadnFrVCEndptInDiscards INTEGER (-2147483648..2147483647), adnFrAccVCifSpeed Gauge, adnFrAccVCadnNodeTime AdnNodeTimeTicks } adnFrAccVCifName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of ifName for use in the accounting record." ::= { adnFrAccVCEntry 1 } adnFrAccVCfrPVCEndptDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptDLCIIndex." ::= { adnFrAccVCEntry 2 } adnFrAccVCadnFrVCRemDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemDlci." ::= { adnFrAccVCEntry 3 } adnFrAccVCadnFrVCUniqueConnID OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUniqueConnID." ::= { adnFrAccVCEntry 4 } adnFrAccVCadnFrVCRemNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNodeID." ::= { adnFrAccVCEntry 5 } adnFrAccVCfrLportNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frLportNumPlan." ::= { adnFrAccVCEntry 6 } adnFrAccVCifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of ifPhysAddress." ::= { adnFrAccVCEntry 7 } adnFrAccVCadnFrVCRemNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNumPlan." ::= { adnFrAccVCEntry 8 } adnFrAccVCadnFrVCRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS deprecated DESCRIPTION "This is a duplicate of adnFrVCRemPhysAddress. This object is deprecated in favor of adnFrAccVCSVCCalledPartyNum." ::= { adnFrAccVCEntry 9 } adnFrAccVCadnFrVCSourceDest OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSourceDest." ::= { adnFrAccVCEntry 10 } adnFrAccVCadnFrVCNumRelinks OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumRelinks." ::= { adnFrAccVCEntry 11 } adnFrAccVCfrPVCEndptInCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInCIR." ::= { adnFrAccVCEntry 12 } adnFrAccVCadnFrVCInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBc." ::= { adnFrAccVCEntry 13 } adnFrAccVCadnFrVCInBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBcs." ::= { adnFrAccVCEntry 14 } adnFrAccVCfrPVCEndptInBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBe." ::= { adnFrAccVCEntry 15 } adnFrAccVCfrPVCEndptOutCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutCIR." ::= { adnFrAccVCEntry 16 } adnFrAccVCadnFrVCOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBc." ::= { adnFrAccVCEntry 17 } adnFrAccVCadnFrVCOutBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBcs." ::= { adnFrAccVCEntry 18 } adnFrAccVCfrPVCEndptOutBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBe." ::= { adnFrAccVCEntry 19 } adnFrAccVCadnFrVCUserOrNet OBJECT-TYPE SYNTAX INTEGER { usercall(1), networkcall(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUserOrNet." ::= { adnFrAccVCEntry 20 } adnFrAccVCfrAccountPVCSegmentSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frAccountPVCSegmentSize." ::= { adnFrAccVCEntry 21 } adnFrAccVCadnFrVCType OBJECT-TYPE SYNTAX INTEGER { other(1), pvc(2), svc(3), mspvc(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCType." ::= { adnFrAccVCEntry 22 } adnFrAccVCTimeEndAcct OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS not-accessible STATUS mandatory DESCRIPTION "This indicates the time this accounting record was generated for this VC. Since an accounting record has this time and the previous time (adnFrAccVCTimeStartAcct), the NMS can determine the length of time an accounting record spans. The time given in coordinated universal time (UTC)." ::= { adnFrAccVCEntry 23 } adnFrAccVCTimeStartAcct OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS not-accessible STATUS mandatory DESCRIPTION "This indicates the time the previous accounting record was sent for this VC. Since an accounting record has this time and the current time (adnFrAccVCTimeEndAcct), the NMS can determine the length of time an accounting record spans. The time is given in coordinated universal time (UTC)." ::= { adnFrAccVCEntry 24 } adnFrAccVCCallTerm OBJECT-TYPE SYNTAX INTEGER { callTerminated(1), callNotTerminated(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This field is placed into the accounting record to indicate if the call has been terminated or not. For a PVC - CallTerminated = PVC has been deleted CallNotTerminated = PVC has not been deleted For a SVC - CallTerminated = call has been cleared CallNotTerminated = call has not been cleared." ::= { adnFrAccVCEntry 25 } adnFrAccVCadnFrChanLineType OBJECT-TYPE SYNTAX INTEGER { other(1), fric(2), frad(3), frx(4), ip(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrChanLineType." ::= { adnFrAccVCEntry 26 } adnFrAccVCadnFrVCNumNodes OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumNodes." ::= { adnFrAccVCEntry 27 } adnFrAccVCTableInSegments OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the ingress segment count for this reporting period." ::= { adnFrAccVCEntry 28 } adnFrAccVCTableInFrames OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the ingress frame count for this reporting period." ::= { adnFrAccVCEntry 29 } adnFrAccVCTableInExcessFrame OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the ingress excess frames count for this reporting period." ::= { adnFrAccVCEntry 30 } adnFrAccVCTableOutSegments OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the egress segment count for this reporting period." ::= { adnFrAccVCEntry 31 } adnFrAccVCTableOutFrames OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the egress frame count for this reporting period." ::= { adnFrAccVCEntry 32 } adnFrAccVCTableOutExcessFrame OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains the egress excess frames count for this reporting period." ::= { adnFrAccVCEntry 33 } adnFrAccVCPVCRegroomed OBJECT-TYPE SYNTAX TruthValue ACCESS not-accessible STATUS mandatory DESCRIPTION "This field indicates if the PVC has been regroomed during the current accounting period. This field is initialized as false(2) and is set to true(1) when the PVC is regroomed. After the accounting period has ended and the accounting record has been collected by the NMS, the field is set to false(2)." ::= { adnFrAccVCEntry 34 } adnFrAccVCSVCCallingPartyNum OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the calling party number." ::= { adnFrAccVCEntry 35 } adnFrAccVCSVCCalledPartyNum OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the number of the party called." ::= { adnFrAccVCEntry 36 } adnFrAccVCSVCCallEstablished OBJECT-TYPE SYNTAX TruthValue ACCESS not-accessible STATUS mandatory DESCRIPTION "This indicates whether a call was established." ::= { adnFrAccVCEntry 37 } adnFrAccVCSVCQ933ClearingCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the clearing cause for the SVC" ::= { adnFrAccVCEntry 38 } adnFrAccVCSVCQ933ClearingLocation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the clearing location." ::= { adnFrAccVCEntry 39 } adnFrAccVCCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS not-accessible STATUS mandatory DESCRIPTION "This indicates the Class of Service (COS) for the VC." ::= { adnFrAccVCEntry 40 } adnFrAccVCadnFrVCLocalNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the node ID for this VC. It is a duplicate of adnNodeRoutingID in the adnNodeTable. Common Name: Local Node ID" ::= { adnFrAccVCEntry 41 } adnFrAccVCadnFrVCDescr OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDescr for use in the accounting record. Common Name: Description" ::= { adnFrAccVCEntry 42 } adnFrAccVCadnFrVCLocalifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "This is ifIndex for the VC." ::= { adnFrAccVCEntry 43 } adnFrAccVCadnFrVCRemoteifIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemoteifindex" ::= { adnFrAccVCEntry 44 } adnFrAccVCadnFrVCEndptInDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCEndptInDiscards." ::= { adnFrAccVCEntry 45 } adnFrAccVCifSpeed OBJECT-TYPE SYNTAX Gauge ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of ifSpeed." ::= { adnFrAccVCEntry 46 } adnFrAccVCadnNodeTime OBJECT-TYPE SYNTAX AdnNodeTimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnNodeTime. GMT (Greenwich Mean Time) when the accounting records are generated." ::= { adnFrAccVCEntry 47 } adnFrStatVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrStatVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table constitutes the FRS (Frame Relay Subscriber) connection-level statistics record. None of the objects in this table can ever be obtained via an SNMP GET command. These objects are only visible in a statistics record. Most of these objects duplicate objects in other tables. They are collected here to allow the statistics record to be sent as a single table to conserve space." ::= { adnFrnetservMIB 7 } adnFrStatVCEntry OBJECT-TYPE SYNTAX AdnFrStatVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One instance of the FRS (Frame Relay Service) connection statistics record" INDEX { ifIndex, frPVCEndptDLCIIndex } ::= { adnFrStatVCTable 1 } AdnFrStatVCEntry ::= SEQUENCE { adnFrStatVCifName DisplayString, adnFrStatVCadnFrVCRemoteifindex INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCRemDlci INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCUniqueConnID INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCRemNodeID AdnRoutingID, adnFrStatVCfrLportNumPlan INTEGER, adnFrStatVCifPhysAddress PhysAddress, adnFrStatVCadnFrVCRemNumPlan INTEGER, adnFrStatVCadnFrVCRemPhysAddress PhysAddress, adnFrStatVCadnFrVCSourceDest INTEGER, adnFrStatVCadnFrVCNumRelinks INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptInCIR INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCInBc INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCInBcs INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptInBe INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptOutCIR INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCOutBc INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCOutBcs INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptOutBe INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCISR INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCUserOrNet INTEGER, adnFrStatVCfrAccountPVCSegmentSize INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCType INTEGER, adnFrStatVCadnNodeTime AdnNodeTimeTicks, adnFrStatVCadnFrVCAdminState INTEGER, adnFrStatVCadnFrVCOperState INTEGER, adnFrStatVCadnFrVCFrameIN INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCFrameOUT INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCSubFrameIN INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCSubFrameOUT INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBeInDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBcsInDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBcInDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBeOutDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBcsOutDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCBcOutDiscards INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCDiscardLisIn INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCInCongsState AdnCongestLevels, adnFrStatVCfrPVCEndptDLCIIndex INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCNumNodes INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptInOctets INTEGER (-2147483648..2147483647), adnFrStatVCfrPVCEndptOutOctets INTEGER (-2147483648..2147483647), adnFrStatVCadnFrVCDescr DisplayString } adnFrStatVCifName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of ifName for use in the connection-level statistics record." ::= { adnFrStatVCEntry 1 } adnFrStatVCadnFrVCRemoteifindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemoteifindex." ::= { adnFrStatVCEntry 2 } adnFrStatVCadnFrVCRemDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemDlci." ::= { adnFrStatVCEntry 3 } adnFrStatVCadnFrVCUniqueConnID OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUniqueConnID." ::= { adnFrStatVCEntry 4 } adnFrStatVCadnFrVCRemNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNodeID." ::= { adnFrStatVCEntry 5 } adnFrStatVCfrLportNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frLportNumPlan." ::= { adnFrStatVCEntry 6 } adnFrStatVCifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of ifPhysAddress." ::= { adnFrStatVCEntry 7 } adnFrStatVCadnFrVCRemNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemNumPlan." ::= { adnFrStatVCEntry 8 } adnFrStatVCadnFrVCRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCRemPhysAddress." ::= { adnFrStatVCEntry 9 } adnFrStatVCadnFrVCSourceDest OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSourceDest." ::= { adnFrStatVCEntry 10 } adnFrStatVCadnFrVCNumRelinks OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumRelinks." ::= { adnFrStatVCEntry 11 } adnFrStatVCfrPVCEndptInCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInCIR." ::= { adnFrStatVCEntry 12 } adnFrStatVCadnFrVCInBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBc." ::= { adnFrStatVCEntry 13 } adnFrStatVCadnFrVCInBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInBcs." ::= { adnFrStatVCEntry 14 } adnFrStatVCfrPVCEndptInBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptInBe." ::= { adnFrStatVCEntry 15 } adnFrStatVCfrPVCEndptOutCIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutCIR." ::= { adnFrStatVCEntry 16 } adnFrStatVCadnFrVCOutBc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBc." ::= { adnFrStatVCEntry 17 } adnFrStatVCadnFrVCOutBcs OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOutBcs." ::= { adnFrStatVCEntry 18 } adnFrStatVCfrPVCEndptOutBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptOutBe." ::= { adnFrStatVCEntry 19 } adnFrStatVCadnFrVCISR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCISR." ::= { adnFrStatVCEntry 20 } adnFrStatVCadnFrVCUserOrNet OBJECT-TYPE SYNTAX INTEGER { usercall(1), networkcall(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCUserOrNet." ::= { adnFrStatVCEntry 21 } adnFrStatVCfrAccountPVCSegmentSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frAccountPVCSegmentSize." ::= { adnFrStatVCEntry 22 } adnFrStatVCadnFrVCType OBJECT-TYPE SYNTAX INTEGER { other(1), pvc(2), svc(3), mspvc(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCType." ::= { adnFrStatVCEntry 23 } adnFrStatVCadnNodeTime OBJECT-TYPE SYNTAX AdnNodeTimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnNodeTime." ::= { adnFrStatVCEntry 24 } adnFrStatVCadnFrVCAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCAdminState." ::= { adnFrStatVCEntry 25 } adnFrStatVCadnFrVCOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCOperState." ::= { adnFrStatVCEntry 26 } adnFrStatVCadnFrVCFrameIN OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCFrameIN." ::= { adnFrStatVCEntry 27 } adnFrStatVCadnFrVCFrameOUT OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCFrameOUT." ::= { adnFrStatVCEntry 28 } adnFrStatVCadnFrVCSubFrameIN OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSubFrameIN." ::= { adnFrStatVCEntry 29 } adnFrStatVCadnFrVCSubFrameOUT OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCSubFrameOUT." ::= { adnFrStatVCEntry 30 } adnFrStatVCadnFrVCBeInDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBeInDiscards." ::= { adnFrStatVCEntry 31 } adnFrStatVCadnFrVCBcsInDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcsInDiscards." ::= { adnFrStatVCEntry 32 } adnFrStatVCadnFrVCBcInDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcInDiscards." ::= { adnFrStatVCEntry 33 } adnFrStatVCadnFrVCBeOutDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBeOutDiscards." ::= { adnFrStatVCEntry 34 } adnFrStatVCadnFrVCBcsOutDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcsOutDiscards." ::= { adnFrStatVCEntry 35 } adnFrStatVCadnFrVCBcOutDiscards OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCBcOutDiscards." ::= { adnFrStatVCEntry 36 } adnFrStatVCadnFrVCDiscardLisIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDiscardLisIn." ::= { adnFrStatVCEntry 37 } adnFrStatVCadnFrVCInCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCInCongsState." ::= { adnFrStatVCEntry 38 } adnFrStatVCfrPVCEndptDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndptDLCIIndex." ::= { adnFrStatVCEntry 39 } adnFrStatVCadnFrVCNumNodes OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCNumNodes." ::= { adnFrStatVCEntry 40 } adnFrStatVCfrPVCEndptInOctets OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndPtInOCtets" ::= { adnFrStatVCEntry 41 } adnFrStatVCfrPVCEndptOutOctets OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of frPVCEndPtOutOctets" ::= { adnFrStatVCEntry 42 } adnFrStatVCadnFrVCDescr OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a duplicate of adnFrVCDescr." ::= { adnFrStatVCEntry 43 } adnFrReachAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrReachAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the list of complete addresses and/or address prefixes configured for this access interface (port/channel) if the Multiple Subscriber Number (MSN) service is used." ::= { adnFrnetservMIB 8 } adnFrReachAddrEntry OBJECT-TYPE SYNTAX AdnFrReachAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnFrReachAddrTable. There is one entry for each element of the list." INDEX { ifIndex, adnFrReachAddrIndex } ::= { adnFrReachAddrTable 1 } AdnFrReachAddrEntry ::= SEQUENCE { adnFrReachAddrIndex INTEGER, adnFrReachAddrNumPlan INTEGER, adnFrReachAddrNumberLength INTEGER, adnFrReachAddrNumber PhysAddress } adnFrReachAddrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of an element in the list." ::= { adnFrReachAddrEntry 1 } adnFrReachAddrNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), e164(2), x121(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The numbering plan of the complete address or address prefix specified in adnFrReachAddrNumber. Common Names: Numbering Plan, Num Plan." DEFVAL { e164 } ::= { adnFrReachAddrEntry 2 } adnFrReachAddrNumberLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of digits of the prefix address specified in adnFrReachAddrNumber." ::= { adnFrReachAddrEntry 3 } adnFrReachAddrNumber OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The complete address or address prefix of a location reachable through this access interface (port/channel)." ::= { adnFrReachAddrEntry 4 } adnFrCosTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrCosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the Class Of Service (COS) information at the channel level for FRS (Frame Relay Service)." ::= { adnFrnetservMIB 9 } adnFrCosEntry OBJECT-TYPE SYNTAX AdnFrCosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table. There will be one entry for each FRS (Frame Relay Service) channel configured." INDEX { ifIndex, adnFrCosIndex } ::= { adnFrCosTable 1 } AdnFrCosEntry ::= SEQUENCE { adnFrCosIndex AdnFrCos, adnFrCosAdminStatus AdnFrCosAdminStatus, adnFrCosOperStatus AdnFrCosOperStatus } adnFrCosIndex OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-only STATUS mandatory DESCRIPTION "The Cos (Class Of Service) index for a specific class of service managed by this frame relay interface." ::= { adnFrCosEntry 1 } adnFrCosAdminStatus OBJECT-TYPE SYNTAX AdnFrCosAdminStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of Class of Service (COS). Set to 'locked(2)' it will cause any new calls to this Class of Service be rejected. Set to 'unlocked(1)' it will cause resumption of the normal operation." DEFVAL { unlocked } ::= { adnFrCosEntry 2 } adnFrCosOperStatus OBJECT-TYPE SYNTAX AdnFrCosOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the operational status of Class of Service (COS). A value of 'locked(2)' indicates that any new calls will be rejected for this Class of Service (COS). A value of 'unlocked(1)' indicates normal operation." ::= { adnFrCosEntry 3 } adnIfMIBObjects OBJECT IDENTIFIER ::= { adnIfMIB 1 } adnIfTestType OBJECT IDENTIFIER ::= { adnIfMIB 3 } adnIfTestTypeOther OBJECT IDENTIFIER ::= { adnIfTestType 1 } adnIfTestTypeNone OBJECT IDENTIFIER ::= { adnIfTestType 2 } adnIfTestTypeData OBJECT IDENTIFIER ::= { adnIfTestType 3 } adnIfTestTypeManualV54 OBJECT IDENTIFIER ::= { adnIfTestType 4 } adnIfTestTypeRemoteV54 OBJECT IDENTIFIER ::= { adnIfTestType 5 } adnIfTestTypeLocalV54 OBJECT IDENTIFIER ::= { adnIfTestType 6 } adnIfTestTypeApplique OBJECT IDENTIFIER ::= { adnIfTestType 7 } adnIfTestTypePriApplBus OBJECT IDENTIFIER ::= { adnIfTestType 8 } adnIfTestTypeRedApplBus OBJECT IDENTIFIER ::= { adnIfTestType 9 } adnIfTestTypeIntCoupler OBJECT IDENTIFIER ::= { adnIfTestType 10 } adnIfTestTypeLineLoop OBJECT IDENTIFIER ::= { adnIfTestType 11 } adnIfTestTypePayloadLoop OBJECT IDENTIFIER ::= { adnIfTestType 12 } adnIfTestTypeLineHW OBJECT IDENTIFIER ::= { adnIfTestType 13 } adnIfTestTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIfTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN Interface Test Table." ::= { adnIfMIBObjects 3 } adnIfTestEntry OBJECT-TYPE SYNTAX AdnIfTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Loop test control and results values for an interface." INDEX { ifIndex } ::= { adnIfTestTable 1 } AdnIfTestEntry ::= SEQUENCE { adnIfTestTimeLimit INTEGER (-2147483648..2147483647), adnIfTestFailLevel INTEGER (-2147483648..2147483647), adnIfTestBitsSentHi Counter, adnIfTestBitsSentLo Counter, adnIfTestBitsReceivedHi Counter, adnIfTestBitsReceivedLo Counter, adnIfTestBitsErroredHi Counter, adnIfTestBitsErroredLo Counter, adnIfTestStartTime TimeStamp, adnIfTestStopTime TimeStamp } adnIfTestTimeLimit OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The time, in hundredths of a second, that the test will run before automatically being terminated. Common name: Time Limit" DEFVAL { 3000 } ::= { adnIfTestEntry 1 } adnIfTestFailLevel OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold for the allowable bit error rate, expressed as one in ten-to-the-power-X, where X is the value of this parameter. For example, the default value of six means that a bit error rate of more than 1 in 1,000,000 is considered failure. This parameter is only used when the HSS sets ifTestResult to success or failed at the end of a test. Common name: Fail Level" DEFVAL { 6 } ::= { adnIfTestEntry 2 } adnIfTestBitsSentHi OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The most significant 32 bits of the 64-bit internal counter of the number of test bits sent. See also adnIfTestBitsSentLo. Common name: Test Bits Sent High #" ::= { adnIfTestEntry 3 } adnIfTestBitsSentLo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The least significant 32 bits of the 64-bit internal counter of the number of test bits sent. See also adnIfTestBitsSentHi. Common name: Test Bits Sent Low #" ::= { adnIfTestEntry 4 } adnIfTestBitsReceivedHi OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The most significant 32 bits of the 64-bit internal counter of the number of test bits received. See also adnIfTestBitsReceivedLo. Common name: Test Bits Received High #" ::= { adnIfTestEntry 5 } adnIfTestBitsReceivedLo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The least significant 32 bits of the 64-bit internal counter of the number of test bits received. See also adnIfTestBitsReceivedHi. Common name: Test Bits Received Low #" ::= { adnIfTestEntry 6 } adnIfTestBitsErroredHi OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The most significant 32 bits of the 64-bit internal counter of the number of test bits received that did not match the bits that were sent (i.e., number of bits in error). See also adnIfTestBitsErroredLo. Common name: Test Bits Errored High #" ::= { adnIfTestEntry 7 } adnIfTestBitsErroredLo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The least significant 32 bits of the 64-bit internal counter of the number of test bits received that did not match the bits that were sent (i.e., number of bits in error). See also adnIfTestBitsErroredHi. Common name: Test Bits Errored Low #" ::= { adnIfTestEntry 8 } adnIfTestStartTime OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime, in hundredths of a second, when the test started. Common name: Start Time" ::= { adnIfTestEntry 9 } adnIfTestStopTime OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime, in hundredths of a second, when the test stopped, or the current time if a test is in progress. Common name: Stop Time" ::= { adnIfTestEntry 10 } adnInterfaces OBJECT IDENTIFIER ::= { adnExtensions 2 } adnIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber." ::= { adnInterfaces 2 } adnIfEntry OBJECT-TYPE SYNTAX AdnIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifIndex } ::= { adnIfTable 1 } AdnIfEntry ::= SEQUENCE { adnIfInstallStatus INTEGER, adnIfControlStatus INTEGER, adnIfSubType INTEGER } adnIfInstallStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object provides additional information concerning the availability status of the interface. It is a bitmap of installation status conditions. When the value of this object is 0, none of the status conditions are present. 1 - initialization incomplete 2 - last restart operator initiated 4 - reserved for test" ::= { adnIfEntry 1 } adnIfControlStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of the interface. Its value is a bitmap of controls that determine the value of ifAdminStatus. A value of 0 indicates that none of the status controls are in effect. 1 - reset 2 - reserve for test 4 - shutting down" ::= { adnIfEntry 2 } adnIfSubType OBJECT-TYPE SYNTAX INTEGER { noqual(1), franp(2), iss(3), frFlip(100), atmInternal(101), atmLogical(102), frLogical(103), ipOverFr(104), ipOverAal5(105) } ACCESS read-only STATUS mandatory DESCRIPTION "This object provides additional type information for interfaces with an ifType of 'other' or 'proprietary virtual'. 1 - No qualification 2 - other, FRANP (Frame Relay Alcatel Network Protocol) 3 - other, ISS (Internal Subscriber Service) 100 - proprietary virtual, FLIP (Fake Line Interface Process) 101 - proprietary virtual, ATM internal line 102 - proprietary virtual, ATM logical line (internode virtual path) 103 - proprietary virtual, frame relay logical line (interworking virtual channel connection) 104 - proprietary virtual, IP over frame relay logical line (interworking FR virtual connection) 105 - proprietary virtual, IP over ATM logical line (interworking virtual channel connection)" ::= { adnIfEntry 3 } adnEquipTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnEquipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of equipment entries." ::= { adnProprietary 1 } adnEquipEntry OBJECT-TYPE SYNTAX AdnEquipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An equipment entry containing objects that represent the state of hardware, firmware, or software components. Currently only hardware components are modelled." INDEX { adnEquipType, adnEquipIndex } ::= { adnEquipTable 1 } AdnEquipEntry ::= SEQUENCE { adnEquipType AdnEquipType, adnEquipIndex INTEGER, adnEquipSubType AutonomousType, adnEquipLastChange TimeStamp, adnEquipInitTime TimeStamp, adnEquipTrapEnableMask INTEGER, adnEquipX731Oper INTEGER, adnEquipX731Admin INTEGER, adnEquipX731Usage INTEGER, adnEquipX731Avail INTEGER, adnEquipInstallStatus INTEGER, adnEquipControlStatus INTEGER, adnEquipControlHistory INTEGER, adnEquipControlOptions INTEGER, adnEquipSwitchoverOptions INTEGER, adnEquipTrapCause INTEGER, adnEquipX731StandbyStatus INTEGER, adnEquipSwitchbackOptions INTEGER } adnEquipType OBJECT-TYPE SYNTAX AdnEquipType ACCESS read-only STATUS mandatory DESCRIPTION "The type of component this entry represents. 1 - other 5 - chassis 2 - node 6 - processor 3 - card 7 - iosPort 4 - interface 8 - aeiPort" ::= { adnEquipEntry 1 } adnEquipIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the component this entry represents." ::= { adnEquipEntry 2 } adnEquipSubType OBJECT-TYPE SYNTAX AutonomousType ACCESS read-only STATUS mandatory DESCRIPTION "A more specific indication of the type of component this entry represents. For example, when adnEquipType is 'card' adnEquipSubType might be 'adnHbcp8'. If this information is not present, its value is set to the OBJECT IDENTIFIER { 0 0 }. Common name: Type" ::= { adnEquipEntry 3 } adnEquipLastChange OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the component entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. Common name: Last Change Time" ::= { adnEquipEntry 4 } adnEquipInitTime OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The time the component initialized with respect to the initialization of the local network management subsystem measured in hundredths of a second. It is the value of sysUpTime at the time the component entered the 'enabled' operational state. If the component initialized prior to the agent's most recent initialization, this object contains a zero value. Common name: Up Since" ::= { adnEquipEntry 5 } adnEquipTrapEnableMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is a bitmap that indicates which states and statuses should cause an adnEquipStatusChange trap to be sent. bit value state/status object (common state name) ------------ ------------------- ------------------- 1 adnEquipX731Oper (operational) 2 adnEquipX731Admin (administrative) 4 adnEquipX731Usage (usage) 8 adnEquipX731Avail (availability) 16 adnEquipInstallStatus (install) 32 adnEquipControlStatus (control) Common name: Trap Enabled" ::= { adnEquipEntry 6 } adnEquipX731Oper OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object represents the operational state of this component. Common name: Operational" REFERENCE "The value of this object represents the operational state of this component. Common name: Operational" ::= { adnEquipEntry 7 } adnEquipX731Admin OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2), shuttingDown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object represents the administrative state of this component. Common name: Administrative" REFERENCE "The value of this object represents the administrative state of this component. Common name: Administrative" ::= { adnEquipEntry 8 } adnEquipX731Usage OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), idle(1), active(2), busy(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object represents the usage state of this component. Common name: Usage" REFERENCE "The value of this object represents the usage state of this component. Common name: Usage" ::= { adnEquipEntry 9 } adnEquipX731Avail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is a bitmap that qualifies the value of the operational and administrative states. When the value of this object is 0, none of the status conditions are present. bit value resource condition ----- ------------------ 1 inTest - undergoing a test procedure 2 failed - has an internal fault preventing its operation 4 powerOff - requires power, but is not powered on 8 offLine - requires a routine operation to put it online 16 offDuty - is inactive by an internal control process 32 dependency - cannot operate because it depends on an unavailable resource 64 degraded - service provided is degraded (speed, capacity, or etc.) 128 notInstalled - not present or incomplete 256 logFull - for a log only, indicates that it is full Common name: Availability" REFERENCE "The value of this object is a bitmap that qualifies the value of the operational and administrative states. When the value of this object is 0, none of the status conditions are present. bit value resource condition ----- ------------------ 1 inTest - undergoing a test procedure 2 failed - has an internal fault preventing its operation 4 powerOff - requires power, but is not powered on 8 offLine - requires a routine operation to put it online 16 offDuty - is inactive by an internal control process 32 dependency - cannot operate because it depends on an unavailable resource 64 degraded - service provided is degraded (speed, capacity, or etc.) 128 notInstalled - not present or incomplete 256 logFull - for a log only, indicates that it is full Common name: Availability" ::= { adnEquipEntry 10 } adnEquipInstallStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object provides additional information concerning the availability status (adnEquipX731Avail) of the equipment. It is a bitmap of installation status conditions. When the value of this object is 0, none of the status conditions are present. bit value meaning qualifies ------------ --------------------------- -------------- 1 absent 'notInstalled' 2 notConfigured 'notInstalled' 4 initializationIncomplete 'offLine' 128 incorrectConfiguration 'failed' The following bit positions are deprecated: bit value meaning qualifies ------------ --------------------------- -------------- 8 operatorInitiatedLastRestart any setting 16 initializationRequired 'offLine' 32 reservedForTest 'inTest' 64 testInitiated 'inTest' " ::= { adnEquipEntry 11 } adnEquipControlStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of the equipment. Its value is a bitmap of controls that determine the value of adnEquipX731Admin. A value of 0 indicates that none of the status controls are in effect. bit value meaning ----- -------------------------------------------- 1 suspend - put card (except control unit (CU)) in permanent reset 2 coldRestart - restart equipment, interrupting service - node and card (except CU) on HSS; node, card and interface on TPX 4 mildRestart - restart equipment, and do not interrupt service - only for active or standby CU card 32 initiateTest - begin test - standby CU card only 64 manualSwitchover - switch to backup - primary MSC, CIG, and BBASE cards and active CU cards only 128 manualSwitchback - switch to primary - primary MSC, CIG, and BBASE cards only 256 osRebuild - all firmware and disk contents are copied fromthe active CU card - standby CU card only The following bit values are deprecated: value meaning ------ -------------------------------------------- 8 debugModeAfterCrash (do not reload operational code after crash and allow viewing of card's data structures) 16 reserveForTest " ::= { adnEquipEntry 12 } adnEquipControlHistory OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipControlHistory object is a bitmap that provides information about the cause of the last restart, switchover to spare and switchback to primary. It may be cleared by setting it to 0; no other SNMP Set operations are allowed. bit val meaning --- ------------------------------------------------------- 1 restartDueToUpdate last restart due to code or configuration update 2 restartFromOperator operator initiated last restart 4 restartDueToFailure last restart was caused by a board or node failure 8 restartDueToNode last restart caused by a node level restart; if not set, restart was at the board level 16 switchoverFromOperator operator initiated last switchover 32 switchbackFromOperator operator initiated last switchback" ::= { adnEquipEntry 13 } adnEquipControlOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipControlOptions object provides a mechanism for controlling future reactions of the equipment. It is a bitmap of options; a value of 0 indicates that no options are in effect. bit value meaning ----- ----------------------------------------------------- 1 debugAfterCrash - place in debug mode after crash; do not reload operational code after crash. For instance, only allow viewing of a card's data structures)" ::= { adnEquipEntry 14 } adnEquipSwitchoverOptions OBJECT-TYPE SYNTAX INTEGER { other(1), noSwitch(2), coldManual(3), coldAutomatic(4), warmAutomatic(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipSwitchoverOptions object provides the options in effect for the next switchover to spare. It is only significant for primary equipment; its value is 'noSwitch' for spares and equipment that does not support redundancy. other : not used noSwitch : used for spares and equipment that do not support redundancy coldManual : used for primary MSC, CIG and BBASE card coldAutomatic : used for primary MSC, CIG and BBASE card warmAutomatic : used for Control Unit and BBSYN card. The switchover is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. Otherwise, the switchover is warm. With the manual option, the switchover is performed only on operator request. With the automatic option, the switchover is performed on HSS supervision software request when a card is failed or on operator request." ::= { adnEquipEntry 15 } adnEquipTrapCause OBJECT-TYPE SYNTAX AdnEquipCause ACCESS read-only STATUS mandatory DESCRIPTION "adnEquipTrapCause contains the value of the adnEquipCause field in the last trap generated by the equipment. It indicates the specific cause of the problem that appeared on the equipment." ::= { adnEquipEntry 16 } adnEquipX731StandbyStatus OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), coldStandby(2), providingService(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The adnEquipX731StandbyStatus object describes the role of spare equipment. In particular, it indicates whether the equipment is in a standby mode or acting for another piece of equipment. coldStandby means that the equipment is not synchronized with the primary equipment; it requires initialization before it can take over the role of the primary equipment." REFERENCE "The adnEquipX731StandbyStatus object describes the role of spare equipment. In particular, it indicates whether the equipment is in a standby mode or acting for another piece of equipment. coldStandby means that the equipment is not synchronized with the primary equipment; it requires initialization before it can take over the role of the primary equipment." ::= { adnEquipEntry 17 } adnEquipSwitchbackOptions OBJECT-TYPE SYNTAX INTEGER { other(1), coldManual(2), coldSemiautomatic(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipSwitchbackOptions object provides the options in effect for the next switchback to primary. It is only significant for primary equipment and if the adnEquipSwitchoverOptions object is different from 'noSwitch'. other : used for configuration purpose when adnEquipSwitchoverOptions value is 'noSwitch', also used for Control Unit and BBSYN card. coldManual : used for primary MSC, CIG and BBASE card. coldSemiautomatic : used for primary MSC, CIG and BBASE card. The switchback is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. With the manual option, the switchback is performed only on operator request. With the semi-automatic option, the switchover is performed on HSS supervision software request when the spare card is failed, or on operator request." ::= { adnEquipEntry 18 } adnContainTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnContainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of container entries. For example, a node contains chassis." ::= { adnProprietary 2 } adnContainEntry OBJECT-TYPE SYNTAX AdnContainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A container entry representing the containment relationship between entries in the equipment table." INDEX { adnContainerType, adnContainerIndex, adnContainedType, adnContainedIndex } ::= { adnContainTable 1 } AdnContainEntry ::= SEQUENCE { adnContainerType AdnEquipType, adnContainerIndex INTEGER, adnContainedType AdnEquipType, adnContainedIndex INTEGER, adnContainerPosition INTEGER } adnContainerType OBJECT-TYPE SYNTAX AdnEquipType ACCESS read-only STATUS mandatory DESCRIPTION "This object corresponds to the adnEquipType of the container component." ::= { adnContainEntry 1 } adnContainerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnEquipIndex of the container component. Common name: Equip Index" ::= { adnContainEntry 2 } adnContainedType OBJECT-TYPE SYNTAX AdnEquipType ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnEquipType of the contained component." ::= { adnContainEntry 3 } adnContainedIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnEquipIndex of the contained component." ::= { adnContainEntry 4 } adnContainerPosition OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object represents the position of the contained component within the container component." ::= { adnContainEntry 5 } adnNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of node entries." ::= { adnProprietary 3 } adnNodeEntry OBJECT-TYPE SYNTAX AdnNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry that augments a equipment entry for a node. This table is based on the system table of MIB-II." INDEX { adnNodeIndex } ::= { adnNodeTable 1 } AdnNodeEntry ::= SEQUENCE { adnNodeIndex INTEGER, adnNodeDescr DisplayString, adnNodeContact DisplayString, adnNodeName DisplayString, adnNodeLocation DisplayString, adnNodeServices INTEGER, adnNodeNumPlan INTEGER, adnNodeAddress PhysAddress, adnNodeClockRefresh INTEGER, adnNodeRoutingID AdnRoutingID, adnNodeMaxChassis INTEGER, adnNodeMachineNumber INTEGER, adnNodeAreaNumber INTEGER, adnNodeNetworkType INTEGER, adnNodeAtmNetPloss INTEGER, adnNodeConfigFrom INTEGER } adnNodeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each node in the agent's domain. This object corresponds to the adnEquipIndex in the equipment table. Release 2.0 and 2.1 only have one entry in the node table, but multiple entries may be present for the regional CU (control unit) environment. Common name: Node Index" ::= { adnNodeEntry 1 } adnNodeDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the entity. This value should include the full name and version identification of the node's hardware type, software operating system, and networking software. The value may only contain printable ASCII characters. Common names: Node Description, Description" ::= { adnNodeEntry 2 } adnNodeContact OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The textual identification of the contact person for this managed node, and information on how to contact the person. Common name: Contact" ::= { adnNodeEntry 3 } adnNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An administratively assigned name for this managed node. By convention, this is the node's fully qualified domain name. Common name: Name" ::= { adnNodeEntry 4 } adnNodeLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The physical location of this node (for example, `telephone closet, 3rd floor'). This information helps a service technician find the node. Common name: Location" ::= { adnNodeEntry 5 } adnNodeServices OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A value which indicates the set of services that this entity primarily offers. The value is a bitmask where each bit indicates whether the entity supports the services at the corresponding protocol stack layer. In the context of the Internet suite of protocols, values should be calculated accordingly: bit layer functionality --- ----- ------------- 1 1 physical (e.g., repeaters) 2 2 datalink/subnetwork (e.g., bridges) 4 3 internet (e.g., IP gateways) 8 4 end-to-end (e.g., IP hosts) 64 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 have the values 16 and 32, respectively. For example, a node which performs primarily routing functions would have a value of 4. In contrast, a node which is an IP host offering application services would have a value of 72 (72 = 8 + 64). Common name: Services" ::= { adnNodeEntry 6 } adnNodeNumPlan OBJECT-TYPE SYNTAX INTEGER { other(1), x121(2), e164(3), ip(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the network numbering plan used for the node's management port. Common name: Network Plan" ::= { adnNodeEntry 7 } adnNodeAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the network address of the node's management port. Common name: IP Address" ::= { adnNodeEntry 8 } adnNodeClockRefresh OBJECT-TYPE SYNTAX INTEGER -- UNITS Minutes ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the period (in minutes) for resynchronizing the clock between CU (Control Unit) and OM (Operations and Maintenance) processors. Common name: Clock Refresh" ::= { adnNodeEntry 9 } adnNodeRoutingID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies the node for CANP (Cell Alcatel Network Protocol) and FRANP (Frame Relay Alcatel Network Protocol) signalling. It is also used by path select, routing, and FRS (Frame Relay Service) code." ::= { adnNodeEntry 10 } adnNodeMaxChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the maximum number of chassis that may be configured in this node. That is, this is the maximum value of the chassis number. The value of this nominator depends upon the HSS model." ::= { adnNodeEntry 11 } adnNodeMachineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The node number inside the area." ::= { adnNodeEntry 12 } adnNodeAreaNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The area number of the node." ::= { adnNodeEntry 13 } adnNodeNetworkType OBJECT-TYPE SYNTAX INTEGER { other(1), public(2), private(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the type of the network. It is the same for all nodes inside a same network. This object is used by ATM signalling to fill in the location field of the CAUSE Information Element in the release messages. This object could be used by Frame Relay signalling as well." REFERENCE "This field indicates the type of the network. It is the same for all nodes inside a same network. This object is used by ATM signalling to fill in the location field of the CAUSE Information Element in the release messages. This object could be used by Frame Relay signalling as well." ::= { adnNodeEntry 14 } adnNodeAtmNetPloss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This value is used for ATM networks. It is the same for all nodes inside a same network. This value represents the probability of cell loss specified by the operator. It is used by ATM traffic management for non real time Variable Bit Rate (VBR) connections. The stored value is the positive value of the decimal logarithm of this probability. For example : 5 means that the probability is '10 to the power of -5'." REFERENCE "This value is used for ATM networks. It is the same for all nodes inside a same network. This value represents the probability of cell loss specified by the operator. It is used by ATM traffic management for non real time Variable Bit Rate (VBR) connections. The stored value is the positive value of the decimal logarithm of this probability. For example : 5 means that the probability is '10 to the power of -5'." ::= { adnNodeEntry 15 } adnNodeConfigFrom OBJECT-TYPE SYNTAX INTEGER { nms(1), hit(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value is used to indicate the origin of the configuration. In case of configuration from HIT (HSS Installation Tool) some checks are suppressed." DEFVAL { nms } ::= { adnNodeEntry 16 } adnCongMgmtMIB OBJECT IDENTIFIER ::= { adnProprietary 5 } adnCongMgmtChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCongMgmtChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Frame relay channel information table for congestion management." ::= { adnCongMgmtMIB 1 } adnCongMgmtChanEntry OBJECT-TYPE SYNTAX AdnCongMgmtChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the frame relay channel information table." INDEX { ifIndex } ::= { adnCongMgmtChanTable 1 } AdnCongMgmtChanEntry ::= SEQUENCE { adnCongMgmtChanCUFValue Counter } adnCongMgmtChanCUFValue OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Equals the current CUF (channel utilization factor) value of the channel." ::= { adnCongMgmtChanEntry 1 } adnCongMgmtVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCongMgmtVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table for frame relay congestion management." ::= { adnCongMgmtMIB 2 } adnCongMgmtVCEntry OBJECT-TYPE SYNTAX AdnCongMgmtVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table entry." INDEX { ifIndex, adnCongMgmtVCDLCIIndex } ::= { adnCongMgmtVCTable 1 } AdnCongMgmtVCEntry ::= SEQUENCE { adnCongMgmtVCDLCIIndex Integer32, adnCongMgmtVCBcInDiscards Counter, adnCongMgmtVCBcsInDiscards Counter, adnCongMgmtVCBeInDiscards Counter, adnCongMgmtVCInBcSubfrmSent Counter, adnCongMgmtVCInBcsSubfrmSent Counter, adnCongMgmtVCInBeSubfrmSent Counter, adnCongMgmtVCInCongsState AdnCongestLevels, adnCongMgmtVCCurrentSIR INTEGER (-2147483648..2147483647) } adnCongMgmtVCDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Equal to the DLCI (data link connection identifier) value for the frame relay trunk or FRS (frame relay subsystem) local DLCI." ::= { adnCongMgmtVCEntry 1 } adnCongMgmtVCBcInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Bc (committed data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion." ::= { adnCongMgmtVCEntry 2 } adnCongMgmtVCBcsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Bcs (statistically committed data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion." ::= { adnCongMgmtVCEntry 3 } adnCongMgmtVCBeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Be (excess burst data rate) sub-frames that were discarded for ingress traffic (TPX interworking function, frame relay switching interface, or frame relay subsystem) due to ISM (internal switching mechanism) queue congestion." ::= { adnCongMgmtVCEntry 4 } adnCongMgmtVCInBcSubfrmSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Bc (committed data rate) sub-frames sent to the ISM (internal switching mechanism)." ::= { adnCongMgmtVCEntry 5 } adnCongMgmtVCInBcsSubfrmSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Bcs (statistically committed data rate) sub-frames sent to the ISM (internal switching mechanism)." ::= { adnCongMgmtVCEntry 6 } adnCongMgmtVCInBeSubfrmSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Be (excess burst data rate) sub-frames sent to the ISM (internal switching mechanism)." ::= { adnCongMgmtVCEntry 7 } adnCongMgmtVCInCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "Congestion level in the direction of transmit to ISM (internal switching mechanism)." ::= { adnCongMgmtVCEntry 8 } adnCongMgmtVCCurrentSIR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Equals the current submission rate of this VC, if this VC belongs to the FRS (frame relay subsystem) channel." ::= { adnCongMgmtVCEntry 9 } adnIsnaMIB OBJECT IDENTIFIER ::= { adnProprietary 6 } adnIsnaIcTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIsnaIcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the internal connection table identifying connections mapped within the internal subscriber node administrator (ISNA) and internal subscriber operation & maintenance (ISOM) software component. These connections are mapped one-for-one to frame relay DLCIs defined within the frame relay service software component." ::= { adnIsnaMIB 1 } adnIsnaIcEntry OBJECT-TYPE SYNTAX AdnIsnaIcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Internal connection for internal subscriber subsystem (ISS) table entry. The adnIsnaIcifIndex and adnIsnaIcDlci used in this table have the same values as the ones used in the isom.mib file table adnIsomVcTable. Maintaining the same values for these objects as in the adnIsomVcTable provides the definition for a given ISS internal connection." INDEX { adnIsnaIcifIndex, adnIsnaIcDlci } ::= { adnIsnaIcTable 1 } AdnIsnaIcEntry ::= SEQUENCE { adnIsnaIcifIndex INTEGER (-2147483648..2147483647), adnIsnaIcDlci INTEGER (-2147483648..2147483647), adnIsnaIcType INTEGER, adnIsnaIcBckIfindex INTEGER (-2147483648..2147483647), adnIsnaIcBckDlci INTEGER (-2147483648..2147483647), adnIsnaIcAdminState INTEGER, adnIsnaIcOperState INTEGER } adnIsnaIcifIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the first half of an internal subscriber subsystem internal connection (IC) referenced by an internal fake line ifIndex. This internal fake line ifIndex is mapped over common memory between the internal subscriber on the operation and maintenance processor and the frame relay service subsystem on the line termination processor. The value of this object is the same one used in a corresponding IC entry called adnIsomVcifIndex in the adnIsomVcTable table." ::= { adnIsnaIcEntry 1 } adnIsnaIcDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the second half of an internal subscriber subsystem internal connection (IC) referenced by an internal fake line DLCI. This internal fake line DLCI is mapped over common memory between the internal subscriber on the operation and maintenance processor and the frame relay service subsystem on the line termination processor. The value of this object is the same one used in a corresponding IC entry called adnIsomVcoutDlci in the adnIsomVcTable table." ::= { adnIsnaIcEntry 2 } adnIsnaIcType OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether this internal connection will act as the primary or backup internal connection for another internal connection." ::= { adnIsnaIcEntry 3 } adnIsnaIcBckIfindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the backup internal connection ifIndex for a given internal connection defined between internal subscriber node administrator and internal subscriber operation and maintenance." ::= { adnIsnaIcEntry 4 } adnIsnaIcBckDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the backup internal connection data link connection identifier for a given internal connection defined between internal subscriber node administrator and internal subscriber operation maintenance." ::= { adnIsnaIcEntry 5 } adnIsnaIcAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the desired state of the internal subscriber subsystem internal connection." DEFVAL { up } ::= { adnIsnaIcEntry 6 } adnIsnaIcOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the current state of the ISS internal connection." ::= { adnIsnaIcEntry 7 } adnIsnaRouteIpTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIsnaRouteIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the routing table used by internal subscriber node administrator to determine to which internal connection to route a packet received from the local IP layer. The routing decision is made based on the destination IP address found in the IP packet." ::= { adnIsnaMIB 2 } adnIsnaRouteIpEntry OBJECT-TYPE SYNTAX AdnIsnaRouteIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This field describes IP routes for each entry in the adnIsnaRouteIpTable." INDEX { adnIsnaRouteifIndex, adnIsnaRouteDlci, adnIsnaRouteIpAddrs } ::= { adnIsnaRouteIpTable 1 } AdnIsnaRouteIpEntry ::= SEQUENCE { adnIsnaRouteifIndex INTEGER (-2147483648..2147483647), adnIsnaRouteDlci INTEGER (-2147483648..2147483647), adnIsnaRouteIpAddrs IpAddress, adnIsnaRouteIpMask IpAddress } adnIsnaRouteifIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is mapped to adnIsnaIcifIndex in the adnIsnaIcTable." ::= { adnIsnaRouteIpEntry 1 } adnIsnaRouteDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is mapped to adnIsnaIcDlci in the adnIsnaIcTable." ::= { adnIsnaRouteIpEntry 2 } adnIsnaRouteIpAddrs OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Defines the IP address of any host that needs to communicate with the HSS for network management purposes. This field is used internally by the internal subscriber subsystem to link IP addresses to internal subscriber subsystem data link connection identifiers (DLCI). At a minimum, the IP address of the A1100 NMS must be entered. Any other hosts using applications that would access the HSS need their IP address entered here." ::= { adnIsnaRouteIpEntry 3 } adnIsnaRouteIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Defines which bits of the IP address are examined in reading the IP address of any host that needs to communicate with the HSS. Bit fields in the mask that are set to '1' cause the address digit to be significant, bit fields that are set to '0' cause the digit to be ignored." ::= { adnIsnaRouteIpEntry 4 } adnIsomMIB OBJECT IDENTIFIER ::= { adnProprietary 7 } adnIsomVcTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIsomVcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table extensions that serve as alternates to the PVC end-point table in RFC1604, which is not sufficient for the HSS network. Additionally, the Network Management System needs to know the identity of the owner of a given ADN proprietary interface and this is done by utilizing object adnIfSubType=iss of adnIfTable." ::= { adnIsomMIB 2 } adnIsomVcEntry OBJECT-TYPE SYNTAX AdnIsomVcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table entry." INDEX { adnIsomVcifIndex, adnIsomVcOutDlci } ::= { adnIsomVcTable 1 } AdnIsomVcEntry ::= SEQUENCE { adnIsomVcifIndex INTEGER (-2147483648..2147483647), adnIsomVcOutDlci INTEGER (-2147483648..2147483647), adnIsomVcAdminState INTEGER, adnIsomVcOperState INTEGER, adnIsomVcTime AdnNodeTimeStamp } adnIsomVcifIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the internal subscriber line carrying this internal connection." ::= { adnIsomVcEntry 1 } adnIsomVcOutDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "DLCI (Data Link Connection Identifier) for this internal connection in the direction from the internal subscriber on the OM (operations and maintenance) processor towards the FRS (frame relay service) subsystem on the LT (line termination) processor." ::= { adnIsomVcEntry 2 } adnIsomVcAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the desired state of this internal subscriber connection." DEFVAL { up } ::= { adnIsomVcEntry 3 } adnIsomVcOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current state of this internal subscriber connection." ::= { adnIsomVcEntry 4 } adnIsomVcTime OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "Defines the time this internal subscriber connection was initialized." ::= { adnIsomVcEntry 5 } adnIsomTrapIpTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIsomTrapIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a list of Network Management System IP (internet protocol) addresses to which an adnHSSCuDownTrap should be sent in the event that the internal subscriber subsystem detects that the CU (control unit) has gone down. The addresses in this table must match the entries in the CU relating to recipients of the adnNodeResync trap." ::= { adnIsomMIB 3 } adnIsomTrapIpEntry OBJECT-TYPE SYNTAX AdnIsomTrapIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One or several IP host address entries mapped to a single DLCI as referenced by ifIndex, adnIsomVcOutDlci, and adnIsomTrapIpAddrs." INDEX { adnIsomTrapifIndex, adnIsomTrapDlci, adnIsomTrapIpAddrs } ::= { adnIsomTrapIpTable 1 } AdnIsomTrapIpEntry ::= SEQUENCE { adnIsomTrapifIndex INTEGER (-2147483648..2147483647), adnIsomTrapDlci INTEGER (-2147483648..2147483647), adnIsomTrapIpAddrs IpAddress } adnIsomTrapifIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object is mapped to 'adnIsomVcifIndex' of 'adnIsomVcTable' table, and is defined similar to the 'adnIsomVcifIndex' entry contained in the adnIsomVcTable table. Used to address the DLCI that carries SNMP CU down traps to a defined NMS host." ::= { adnIsomTrapIpEntry 1 } adnIsomTrapDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Mapped to 'adnIsomVcOutDlci' of 'adnIsomVcTable' table, and is defined similar to 'adnIsomVcOutDlci' entry contained in the adnIsomVcTable table. Used to address the DLCI that carries SNMP CU down traps to a defined (IP host) NMS." ::= { adnIsomTrapIpEntry 2 } adnIsomTrapIpAddrs OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Full 4-byte NMS IP address that the Internal Subscriber Operation and maintenance subsystem uses to send a SNMP CU down trap in the event the node supervision subsystem reports a CU down condition." ::= { adnIsomTrapIpEntry 3 } adnRoutesMIB OBJECT IDENTIFIER ::= { adnProprietary 8 } AdnRoutesNumPlan ::= INTEGER { x121(1), e164(2), atmInternal(3), atmPrivate(4), other(5) } adnRtsCritHopNulNul OBJECT IDENTIFIER ::= { adnRoutingCriteria 1 } adnRtsCritDlyMnyHop OBJECT IDENTIFIER ::= { adnRoutingCriteria 2 } adnRtsCritMnyDlyHop OBJECT IDENTIFIER ::= { adnRoutingCriteria 3 } adnCalcMonTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCalcMonEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "General parameters used by the routing services for node-to-path table calculation." ::= { adnRoutesMIB 1 } adnCalcMonEntry OBJECT-TYPE SYNTAX AdnCalcMonEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) of the adnCalcMonTable provides the general parameters used by ' the routing services for node-to-path table calculation for a specific type of service and criterion." INDEX { adntosIndex, adncriterionIndex } ::= { adnCalcMonTable 1 } AdnCalcMonEntry ::= SEQUENCE { adntosIndex INTEGER, adncriterionIndex INTEGER, adnMaxPath INTEGER, adnMaxCost INTEGER (-2147483648..2147483647), adnMinTimeBetCalc INTEGER (-2147483648..2147483647) } adntosIndex OBJECT-TYPE SYNTAX INTEGER { other(1), fr(2), atmVc(3), atmVp(4) } -- UNITS Type of service ACCESS not-accessible STATUS deprecated DESCRIPTION "Type of service: frame relay, ATM virtual channel, ATM virtual path, etc." ::= { adnCalcMonEntry 1 } adncriterionIndex OBJECT-TYPE SYNTAX INTEGER { other(1), hop(2), delay(3) } -- UNITS Criterion index ACCESS not-accessible STATUS deprecated DESCRIPTION "Rule used to generate a routing table based on the link cost metrics." ::= { adnCalcMonEntry 2 } adnMaxPath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Maximum number of paths per node in the node-to-path routing table for a specific type of service and criterion." DEFVAL { 5 } ::= { adnCalcMonEntry 3 } adnMaxCost OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Maximum cost of a path to an arbitrary destination node for a type of service and criterion. If the criterion is the number of hops, maximum number of hops. The default value is defined for a criterion equal to the number of hops." DEFVAL { 10 } ::= { adnCalcMonEntry 4 } adnMinTimeBetCalc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-write STATUS deprecated DESCRIPTION "Minimum time between successive route calculations for a specific type of service and criterion and identifies the minimum time between completion of routing services initialization and the first routing calculation." DEFVAL { 30 } ::= { adnCalcMonEntry 5 } adnMessMonTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnMessMonEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "General parameters used by the routing services for routing message handling." ::= { adnRoutesMIB 2 } adnMessMonEntry OBJECT-TYPE SYNTAX AdnMessMonEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) of the adnMessMonTable provides the general parameters used by the routing services for routing message handling for a specific type of service." INDEX { adntosIndex } ::= { adnMessMonTable 1 } AdnMessMonEntry ::= SEQUENCE { adnMinTimeBetLS INTEGER (-2147483648..2147483647), adnbroadcastLSU INTEGER, adnLSUbroadcastfreez INTEGER, adnTblDistfreez INTEGER } adnMinTimeBetLS OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS deprecated DESCRIPTION "Minimum time between self-generated link state messages for the node." DEFVAL { 2 } ::= { adnMessMonEntry 1 } adnbroadcastLSU OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS deprecated DESCRIPTION "If active, a trigger for a one shot link state update broadcast for this node. The status is reset to inactive when done." DEFVAL { 3 } ::= { adnMessMonEntry 2 } adnLSUbroadcastfreez OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS deprecated DESCRIPTION "Status of the link state update processing. When the status is active, no link state update for the node is broadcast for a period of time." DEFVAL { 3 } ::= { adnMessMonEntry 3 } adnTblDistfreez OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS deprecated DESCRIPTION "Status of the table distribution processor. When the status is active, the table distributions sent to a coupler card are frozen." DEFVAL { 3 } ::= { adnMessMonEntry 4 } adnManNPhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManNPhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Information about the headers of the manual node-to-path tables for all types of service and criteria." ::= { adnRoutesMIB 3 } adnManNPhdrEntry OBJECT-TYPE SYNTAX AdnManNPhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each row provides information about the header of a specific manual node-to-path table." INDEX { adntosIndex, adncriterionIndex } ::= { adnManNPhdrTable 1 } AdnManNPhdrEntry ::= SEQUENCE { adnManNPhdrVer INTEGER, adnManNPhdrStamp AdnNodeTimeStamp, adnManNPhdrNum INTEGER (-2147483648..2147483647) } adnManNPhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Version number of the manual node-to-path table." ::= { adnManNPhdrEntry 1 } adnManNPhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS deprecated DESCRIPTION "Time-of-day stamp of the manual node-to-path table." ::= { adnManNPhdrEntry 2 } adnManNPhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of destination node entries in the manual node-to-path table." ::= { adnManNPhdrEntry 3 } adnManNPPathhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManNPPathhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines access to information in the destination node entry headers (Dnode headers) of the manual node-to-path table on the control unit. Dnode header of a node-to-path table entry gives summary information about the routing to that Dnode. See the associated adnManNPpthTable for path information associated with each Dnode header of the adnManNPPathhdrTable." ::= { adnRoutesMIB 4 } adnManNPPathhdrEntry OBJECT-TYPE SYNTAX AdnManNPPathhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnManNPPathhdrTable provides all the information found in a table entry's header of the manual node-to-path table on the control unit." INDEX { adntosIndex, adncriterionIndex, adnManDnodeIndex } ::= { adnManNPPathhdrTable 1 } AdnManNPPathhdrEntry ::= SEQUENCE { adnManDnodeIndex AdnRoutingID, adnManNPhdrNumPth INTEGER, adnManRemNodeMacNum INTEGER (-2147483648..2147483647), adnManRemNodeAreaNum INTEGER (-2147483648..2147483647) } adnManDnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS deprecated DESCRIPTION "A destination node ID identifies an entry in the node-to-path table. HSS routing services treats a node ID." ::= { adnManNPPathhdrEntry 1 } adnManNPhdrNumPth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node." ::= { adnManNPPathhdrEntry 2 } adnManRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The machine number part of adnManDnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnManNPPathhdrEntry 3 } adnManRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The area number part of adnManDnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnManNPPathhdrEntry 4 } adnManNPpthTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManNPpthEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines access to path information in a destination node entry of the manual node-to-path table on the control unit." ::= { adnRoutesMIB 5 } adnManNPpthEntry OBJECT-TYPE SYNTAX AdnManNPpthEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnManNPpthTable provides all the information in a particular path entry of the manual node-to-path table on the control unit." INDEX { adntosIndex, adncriterionIndex, adnManDnodeIndex, adnManPathIndex } ::= { adnManNPpthTable 1 } AdnManNPpthEntry ::= SEQUENCE { adnManPathIndex INTEGER, adnManNPpthCost INTEGER (-2147483648..2147483647), adnManNPpthAJid AdnRoutingID, adnManNPpthIpAdr IpAddress } adnManPathIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS deprecated DESCRIPTION "Number that identifies path order: first, second, third, etc. Number of paths in an node-to-path table entry is variable." ::= { adnManNPpthEntry 1 } adnManNPpthCost OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Cost of getting to the destination from this node using this path." ::= { adnManNPpthEntry 2 } adnManNPpthAJid OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS deprecated DESCRIPTION "The node identifier of an adjacent node to which this node is connected, effectively the first hop of a route to the destination node." ::= { adnManNPpthEntry 3 } adnManNPpthIpAdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the destination node." ::= { adnManNPpthEntry 4 } adnCurNPhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurNPhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Information about the headers of the automatically built node-to-path tables, for all the types of service and criteria. These tables are used for establishing calls within the network." ::= { adnRoutesMIB 6 } adnCurNPhdrEntry OBJECT-TYPE SYNTAX AdnCurNPhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each row provides information about the header of a specific automatically built node-to-path table." INDEX { adntosIndex, adncriterionIndex } ::= { adnCurNPhdrTable 1 } AdnCurNPhdrEntry ::= SEQUENCE { adntosIndex INTEGER, adncriterionIndex INTEGER, adnCurNPhdrVer INTEGER, adnCurNPhdrStamp AdnNodeTimeStamp, adnCurNPhdrNum INTEGER (-2147483648..2147483647) } adnCurNPhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Version number of the current node-to-path table." ::= { adnCurNPhdrEntry 1 } adnCurNPhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS seconds ACCESS read-only STATUS deprecated DESCRIPTION "Time-of-day stamp of the current node-to-path table." ::= { adnCurNPhdrEntry 2 } adnCurNPhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of destination node entries in the current node-to-path table." ::= { adnCurNPhdrEntry 3 } adnCurNPPathhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurNPPathhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines access to information in the destination node entry headers of the current node-to-path table on the control unit. A destination node header of a node-to-path table entry gives summary information about that destination node's routing status. See the associated adnCurNPpthTable for the path information associated with each Dnode of the adnCurNPPathhdrTable." ::= { adnRoutesMIB 7 } adnCurNPPathhdrEntry OBJECT-TYPE SYNTAX AdnCurNPPathhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnCurNPPathhdrTable provides all the information found in a table entry's header of the current node-to-path table on the control unit." INDEX { adntosIndex, adncriterionIndex, adnCurDnodeIndex } ::= { adnCurNPPathhdrTable 1 } AdnCurNPPathhdrEntry ::= SEQUENCE { adnCurDnodeIndex AdnRoutingID, adnCurNPhdrIpAdr IpAddress, adnCurNPhdrNumPth INTEGER, adnCurRemNodeMacNum INTEGER (-2147483648..2147483647), adnCurRemNodeAreaNum INTEGER (-2147483648..2147483647) } adnCurDnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS deprecated DESCRIPTION "A destination node ID identifies an entry in the node-to-path table." ::= { adnCurNPPathhdrEntry 1 } adnCurNPhdrIpAdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the adjacent node." ::= { adnCurNPPathhdrEntry 2 } adnCurNPhdrNumPth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of paths indicates the number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node." ::= { adnCurNPPathhdrEntry 3 } adnCurRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The machine number part of adnCurDnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnCurNPPathhdrEntry 4 } adnCurRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The area number part of adnCurDnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnCurNPPathhdrEntry 5 } adnCurNPpthTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurNPpthEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Defines access to path information in a destination node entry of a current node-to-path table on the control unit." ::= { adnRoutesMIB 8 } adnCurNPpthEntry OBJECT-TYPE SYNTAX AdnCurNPpthEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnCurNPpthTable provides all the information in a particular path entry of the current node-to-path table on the control unit." INDEX { adntosIndex, adncriterionIndex, adnCurDnodeIndex, adnCurPathIndex } ::= { adnCurNPpthTable 1 } AdnCurNPpthEntry ::= SEQUENCE { adnCurPathIndex INTEGER, adnCurNPpthCost INTEGER (-2147483648..2147483647), adnCurNPpthAJid AdnRoutingID } adnCurPathIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS deprecated DESCRIPTION "Number that identifies path order: first, second, third, etc. Number of paths in a node-to-path table entry is variable." ::= { adnCurNPpthEntry 1 } adnCurNPpthCost OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The cost of getting to the destination from this node using this path." ::= { adnCurNPpthEntry 2 } adnCurNPpthAJid OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS deprecated DESCRIPTION "An adjacent node to which this node is connected." ::= { adnCurNPpthEntry 3 } adnManAjhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManAjhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Information about the headers of the manual adjacency tables for all types of service." ::= { adnRoutesMIB 9 } adnManAjhdrEntry OBJECT-TYPE SYNTAX AdnManAjhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) provides the information about a header of a specific manual adjacency table." INDEX { adntosIndex } ::= { adnManAjhdrTable 1 } AdnManAjhdrEntry ::= SEQUENCE { adnManAjhdrVer INTEGER, adnManAjhdrStamp AdnNodeTimeStamp, adnManAjhdrNum INTEGER (-2147483648..2147483647) } adnManAjhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Version number of the manual adjacency table." ::= { adnManAjhdrEntry 1 } adnManAjhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS seconds ACCESS read-only STATUS deprecated DESCRIPTION "Time-of-day stamp of the manual adjacency table." ::= { adnManAjhdrEntry 2 } adnManAjhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of adjacent node entries in the manual adjacency table." ::= { adnManAjhdrEntry 3 } adnManAjLinehdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManAjLinehdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "References to the HSS routing services manual adjacency table on the control unit, used to keep track of adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the adnManAjLineTable for individual lines associated with a particular adjacent node, header." ::= { adnRoutesMIB 10 } adnManAjLinehdrEntry OBJECT-TYPE SYNTAX AdnManAjLinehdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnManAjLinehdrTable provides key information about a particular adjacent node." INDEX { adntosIndex, adnManAnodeIndex } ::= { adnManAjLinehdrTable 1 } AdnManAjLinehdrEntry ::= SEQUENCE { adnManAnodeIndex AdnRoutingID, adnAJManNumLines INTEGER, adnManAjNodeMacNum INTEGER (-2147483648..2147483647), adnManAjNodeAreaNum INTEGER (-2147483648..2147483647) } adnManAnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS deprecated DESCRIPTION "Each adjacent node ID identifies an entry in the adjacency table." ::= { adnManAjLinehdrEntry 1 } adnAJManNumLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Count of the available logical lines in the connection to this adjacent node." ::= { adnManAjLinehdrEntry 2 } adnManAjNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The machine number part of adnManAnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnManAjLinehdrEntry 3 } adnManAjNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The area number part of adnManAnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnManAjLinehdrEntry 4 } adnManAjLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnManAjLineEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Access to the line level information in the adjacency table for each adjacent node entry. This table is related to the adnManAjhdrTable, and refers only to the control unit." ::= { adnRoutesMIB 11 } adnManAjLineEntry OBJECT-TYPE SYNTAX AdnManAjLineEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnManAjLineTable provides key information about a particular logical line (channel) to the adjacent node." INDEX { adntosIndex, adnManAnodeIndex, adnAJManLocIfIndex } ::= { adnManAjLineTable 1 } AdnManAjLineEntry ::= SEQUENCE { adnAJManLocIfIndex INTEGER (-2147483648..2147483647), adnAJManMetricCost1 INTEGER (-2147483648..2147483647), adnAJManMetricCost2 INTEGER (-2147483648..2147483647), adnAJManMetricCost3 INTEGER (-2147483648..2147483647), adnAJManRemIfIndex INTEGER (-2147483648..2147483647) } adnAJManLocIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS deprecated DESCRIPTION "Identifies, uniquely within a node, a network interface." ::= { adnManAjLineEntry 1 } adnAJManMetricCost1 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS deprecated DESCRIPTION "Cost in Metric 1 for a particular logical line entry with a specific type of service." ::= { adnManAjLineEntry 2 } adnAJManMetricCost2 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS deprecated DESCRIPTION "Cost in Metric 2 for a particular logical line entry with a specific type of service." ::= { adnManAjLineEntry 3 } adnAJManMetricCost3 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS deprecated DESCRIPTION "Cost in Metric 3 for a particular logical line entry with a specific type of service." ::= { adnManAjLineEntry 4 } adnAJManRemIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Uniquely identifies a network interface within the HSS remote node. If the remote node is a TPX, this object identifies the T1 interface identifier." ::= { adnManAjLineEntry 5 } adnCurAjhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurAjhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Information about the headers of the learned adjacency tables for all types of service." ::= { adnRoutesMIB 12 } adnCurAjhdrEntry OBJECT-TYPE SYNTAX AdnCurAjhdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each row provides information about a header of a specific learned adjacency table." INDEX { adntosIndex } ::= { adnCurAjhdrTable 1 } AdnCurAjhdrEntry ::= SEQUENCE { adnCurAjhdrVer INTEGER, adnCurAjhdrStamp AdnNodeTimeStamp, adnCurAjhdrNum INTEGER (-2147483648..2147483647) } adnCurAjhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Version number of a learned adjacency table." ::= { adnCurAjhdrEntry 1 } adnCurAjhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS seconds ACCESS read-only STATUS deprecated DESCRIPTION "Time-of-day stamp of a learned adjacency table." ::= { adnCurAjhdrEntry 2 } adnCurAjhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of adjacent node entries in a learned adjacency table." ::= { adnCurAjhdrEntry 3 } adnCurAjLinehdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurAjLinehdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Refers to the HSS routing services current adjacency table on the control unit used to track adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the related AdnCurAjLineTable for individual lines associated with a particular adjacent node header." ::= { adnRoutesMIB 13 } adnCurAjLinehdrEntry OBJECT-TYPE SYNTAX AdnCurAjLinehdrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnCurAjLinehdrTable provides key information about a particular adjacent node." INDEX { adntosIndex, adnCurAnodeIndex } ::= { adnCurAjLinehdrTable 1 } AdnCurAjLinehdrEntry ::= SEQUENCE { adnCurAnodeIndex AdnRoutingID, adnAJCurNodetype INTEGER, adnAJCurNumLines INTEGER, adnAJCurNxtLine INTEGER, adnAJNState INTEGER, adnCurAjNodeMacNum INTEGER (-2147483648..2147483647), adnCurAjNodeAreaNum INTEGER (-2147483648..2147483647) } adnCurAnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS deprecated DESCRIPTION "Each adjacent node ID identifies an entry in the adjacency table. Routing services treats a node ID as an unsigned 32-bit integer." ::= { adnCurAjLinehdrEntry 1 } adnAJCurNodetype OBJECT-TYPE SYNTAX INTEGER { other(1), tpx(2), hss(3) } ACCESS read-only STATUS deprecated DESCRIPTION "Node type can be TPX or HSS. Commonly used to distinguish interworking characteristics." ::= { adnCurAjLinehdrEntry 2 } adnAJCurNumLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Number of available logical lines (channels) in the connection to this adjacent node." ::= { adnCurAjLinehdrEntry 3 } adnAJCurNxtLine OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Specifies the next logical line to be used for routing message traffic; allows HSS routing services to spread the routing message traffic over all logical lines comprising the connection." ::= { adnCurAjLinehdrEntry 4 } adnAJNState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), exchange(3), loading(4), full(5) } ACCESS read-only STATUS deprecated DESCRIPTION "Identifies a state that governs HSS routing services adjacency formation." ::= { adnCurAjLinehdrEntry 5 } adnCurAjNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The machine number part of adnCurAnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnCurAjLinehdrEntry 6 } adnCurAjNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The area number part of adnCurAnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnCurAjLinehdrEntry 7 } adnCurAjLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCurAjLineEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Gives access to the line level information in the adjacency table for each adjacent node entry. This table is related to the adnCurAjhdrTable and refers only to the control unit." ::= { adnRoutesMIB 14 } adnCurAjLineEntry OBJECT-TYPE SYNTAX AdnCurAjLineEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnCurAjLineTable provides key information about a particular logical line (channel) to the adjacent node." INDEX { adntosIndex, adnCurAnodeIndex, adnAJCurLocIfIndex } ::= { adnCurAjLineTable 1 } AdnCurAjLineEntry ::= SEQUENCE { adnAJCurLocIfIndex INTEGER (-2147483648..2147483647), adnAJCurMetricCost1 INTEGER (-2147483648..2147483647), adnAJCurMetricCost2 INTEGER (-2147483648..2147483647), adnAJCurMetricCost3 INTEGER (-2147483648..2147483647), adnAJCurRemIfIndex INTEGER (-2147483648..2147483647) } adnAJCurLocIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS deprecated DESCRIPTION "Uniquely identifies a network interface within a node." ::= { adnCurAjLineEntry 1 } adnAJCurMetricCost1 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Cost in Metric 1 for a particular logical line entry with a specific type of service." ::= { adnCurAjLineEntry 2 } adnAJCurMetricCost2 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Cost in Metric 2 for a particular logical line entry with a specific type of service." ::= { adnCurAjLineEntry 3 } adnAJCurMetricCost3 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Cost in Metric 3 for a particular logical line entry with a specific type of service." ::= { adnCurAjLineEntry 4 } adnAJCurRemIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Uniquely identifies a network interface within the HSS remote node. If the remote node is a TPX, this object identifies the T1 interface identifier." ::= { adnCurAjLineEntry 5 } adnLahdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLahdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Provides information about the headers of the local address table separate for each numbering plan." ::= { adnRoutesMIB 15 } adnLahdrEntry OBJECT-TYPE SYNTAX AdnLahdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) provides information about a header of a specific numbering plan local address table." INDEX { adnNumPlanIndex } ::= { adnLahdrTable 1 } AdnLahdrEntry ::= SEQUENCE { adnNumPlanIndex AdnRoutesNumPlan, adnLahdrVer INTEGER, adnLahdrStamp AdnNodeTimeStamp, adnLahdrNum INTEGER (-2147483648..2147483647) } adnNumPlanIndex OBJECT-TYPE SYNTAX AdnRoutesNumPlan ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of address; for example, X.121." ::= { adnLahdrEntry 1 } adnLahdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local Address header version number." ::= { adnLahdrEntry 2 } adnLahdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "Time-of-day stamp of the local address table." ::= { adnLahdrEntry 3 } adnLahdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of address entries in the local address table." ::= { adnLahdrEntry 4 } adnLaTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLaEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Represents the HSS routing services local address table on the control unit and provides access to information used to complete call routing to an access point within the current node." ::= { adnRoutesMIB 16 } adnLaEntry OBJECT-TYPE SYNTAX AdnLaEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnLaTable maps a (local) address supported in the node to its internal identifier." INDEX { adnNumPlanIndex, adnLaAdIndex } ::= { adnLaTable 1 } AdnLaEntry ::= SEQUENCE { adnLaAdIndex OCTET STRING, adnLaIfIndex INTEGER (-2147483648..2147483647) } adnLaAdIndex OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS deprecated DESCRIPTION "Address, maintained as ASCII decimal." ::= { adnLaEntry 1 } adnLaIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "Interface number at the routing completion point." ::= { adnLaEntry 2 } adnAnhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAnhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about the headers of the address-to-node table for each numbering plan." ::= { adnRoutesMIB 17 } adnAnhdrEntry OBJECT-TYPE SYNTAX AdnAnhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row provides information about a header of a specific numbering plan table." INDEX { adnAnhdrNumPlanIndex } ::= { adnAnhdrTable 1 } AdnAnhdrEntry ::= SEQUENCE { adnAnhdrNumPlanIndex AdnRoutesNumPlan, adnAnhdrVer INTEGER, adnAnhdrStamp AdnNodeTimeStamp, adnAnhdrNum INTEGER (-2147483648..2147483647) } adnAnhdrNumPlanIndex OBJECT-TYPE SYNTAX AdnRoutesNumPlan ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of address; for example, X.121." ::= { adnAnhdrEntry 1 } adnAnhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Version number of the address-to-node mapping table." ::= { adnAnhdrEntry 2 } adnAnhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS second ACCESS read-only STATUS mandatory DESCRIPTION "Time-of-day stamp of the address-to-node mapping table." ::= { adnAnhdrEntry 3 } adnAnhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of address entries in the address-to-node mapping table." ::= { adnAnhdrEntry 4 } adnAnTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "HSS routing services address-to-node mapping table on the control unit. The address-to-node table records the node(s) in the network that supports the specified address. This table is used only by the frame relay type of service." ::= { adnRoutesMIB 18 } adnAnEntry OBJECT-TYPE SYNTAX AdnAnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnAnTable that maps an address supported in the network to the node(s) where it is supported. An address may be supported multiple times." INDEX { adnAnNumPlanIndex, adnAnAdIndex, adnAnNodeIndex } ::= { adnAnTable 1 } AdnAnEntry ::= SEQUENCE { adnAnNumPlanIndex AdnRoutesNumPlan, adnAnAdIndex OCTET STRING, adnAnNodeIndex AdnRoutingID, adnAnRank INTEGER, adnAnNodeMacNum INTEGER (-2147483648..2147483647), adnAnNodeAreaNum INTEGER (-2147483648..2147483647), adnAnPartialAddrFlag INTEGER, adnAnAddrLength INTEGER } adnAnNumPlanIndex OBJECT-TYPE SYNTAX AdnRoutesNumPlan ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of address; for example, X.121." ::= { adnAnEntry 1 } adnAnAdIndex OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Target address, maintained as ASCII decimal." ::= { adnAnEntry 2 } adnAnNodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "Node ID for a specific node which supports the target address. Since a single target address may be supported by more than one node (several service-gateway nodes for instance), there should be a separate entry for each one." ::= { adnAnEntry 3 } adnAnRank OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Rank (cost order) of the node ID to reach the address. The rank of the entry with the lowest cost is 1." ::= { adnAnEntry 4 } adnAnNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAnNodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnAnEntry 5 } adnAnNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAnNodeIndex, the routing area number of the node at the remote endpoint." ::= { adnAnEntry 6 } adnAnPartialAddrFlag OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When a sequence of addresses is homing through a single gateway (Gateway 1), a user can enter a partial address by setting Partial Address Flag to `YES' to support the entire range of addresses. E.g.: 31103600 to 31103699 are going to Gateway 1. User can enter 311036 to Gateway 1 with adnAnPartialAddrFlag `yes'. " ::= { adnAnEntry 7 } adnAnAddrLength OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION " The number of digits in the Address that is supported by network." ::= { adnAnEntry 8 } adnStatsNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnStatsNodeEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Statistics node table that gives access to node level information." ::= { adnRoutesMIB 19 } adnStatsNodeEntry OBJECT-TYPE SYNTAX AdnStatsNodeEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry (row) in the adnStatsNodeTable provides node level statistics." INDEX { adntosIndex, adnCurDnodeIndex } ::= { adnStatsNodeTable 1 } AdnStatsNodeEntry ::= SEQUENCE { adnStatsTotLSU INTEGER (-2147483648..2147483647), adnStatsTotDupLSU INTEGER (-2147483648..2147483647), adnStatsTotOldLSU INTEGER (-2147483648..2147483647) } adnStatsTotLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The number of link state update messages received from the specified node." ::= { adnStatsNodeEntry 1 } adnStatsTotDupLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The number of duplicate link state update messages, received from the specified node, that were discarded." ::= { adnStatsNodeEntry 2 } adnStatsTotOldLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The number of link state update messages received from the specified node, that were too old and had to be discarded." ::= { adnStatsNodeEntry 3 } adnRtsCritCountGroup OBJECT IDENTIFIER ::= { adnRoutesMIB 20 } adnRtsCritCount OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the criterion cost summary table." ::= { adnRtsCritCountGroup 1 } adnRtsCritSmryTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnRtsCritSmryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table summarizes each supported criterion cost, giving the ID (unique identifier) and the order and IDs of the three cost metrics that comprise the criterion cost." ::= { adnRoutesMIB 21 } adnRtsCritSmryEntry OBJECT-TYPE SYNTAX AdnRtsCritSmryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the routing criteria summary table. Each entry represents a particular routing criterion. For a routing criterion consisting of the ordered set of metric types { metric1, metric2, metric3 } registered as { adnRoutingCriteria n }, the object adnRtsCritID will have the value 'n', adnRtsCritOID will have the value '{ adnRoutingCriteria n }', adnRtsCritMetricHigh will have the value 'metric1', adnRtsCritMetricMid will have the value 'metric2' and adnRtsCritMetricLow will have the value 'metric3'." INDEX { adnRtsCritID } ::= { adnRtsCritSmryTable 1 } AdnRtsCritSmryEntry ::= SEQUENCE { adnRtsCritID INTEGER (-2147483648..2147483647), adnRtsCritOID AdnRoutingCriteriaType, adnRtsCritMetricHigh AdnRoutingMetricType, adnRtsCritMetricMid AdnRoutingMetricType, adnRtsCritMetricLow AdnRoutingMetricType } adnRtsCritID OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry number for this entry in this criterion cost summary table. This value ranges from 1 to the value of adnRtsCritCount and is equal to the rightmost sub-identifier of the corresponding adnRtsCritOID value." ::= { adnRtsCritSmryEntry 1 } adnRtsCritOID OBJECT-TYPE SYNTAX AdnRoutingCriteriaType ACCESS read-only STATUS mandatory DESCRIPTION "The routing criterion object identifier corresponding to adnRtsCritID." ::= { adnRtsCritSmryEntry 2 } adnRtsCritMetricHigh OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "The highest priority routing metric type of this routing criterion cost type." ::= { adnRtsCritSmryEntry 3 } adnRtsCritMetricMid OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "The second highest priority routing metric type in this routing criterion cost type." ::= { adnRtsCritSmryEntry 4 } adnRtsCritMetricLow OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "The third highest priority routing metric type in this routing criterion cost type." ::= { adnRtsCritSmryEntry 5 } adnCalcCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCalcCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "General parameters used by the routing services for node-to-path table calculation." ::= { adnRoutesMIB 22 } adnCalcCtlEntry OBJECT-TYPE SYNTAX AdnCalcCtlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) of the adnCalcCtlTable provides the general parameters used by the routing services for node-to-path table calculation for a specific type of service and criterion. Note that there are 3 metric types known in R 2.2. Additional metric types may be added at the end of the entry, as future requirements dictate." INDEX { adnTosIndex, adnRtsCritID } ::= { adnCalcCtlTable 1 } AdnCalcCtlEntry ::= SEQUENCE { adnTosIndex INTEGER, adnMaxNumPath INTEGER (-2147483648..2147483647), adnMinTimeBtwCalc INTEGER (-2147483648..2147483647), adnMetricDefHigh INTEGER (-2147483648..2147483647), adnMetricMaxHigh INTEGER (-2147483648..2147483647), adnMetricDefMid INTEGER (-2147483648..2147483647), adnMetricMaxMid INTEGER (-2147483648..2147483647), adnMetricDefLow INTEGER (-2147483648..2147483647), adnMetricMaxLow INTEGER (-2147483648..2147483647) } adnTosIndex OBJECT-TYPE SYNTAX INTEGER { other(1), fr(2), atmVc(3), atmVp(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of service: frame relay, ATM virtual channel, ATM virtual path, etc." ::= { adnCalcCtlEntry 1 } adnMaxNumPath OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of paths to be presented in the node-to-path routing table, for a given destination node, for a specific type of service and criterion." ::= { adnCalcCtlEntry 2 } adnMinTimeBtwCalc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time between successive route calculations for a specific type of service and criterion." ::= { adnCalcCtlEntry 3 } adnMetricDefHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The high priority default cost metric value used for the specified Type Of Service (TOS), criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxHigh' is equal to 'adnMetricDefHigh'. This 'adnMetricDefHigh' allows easy recall of exactly what the default value is." ::= { adnCalcCtlEntry 4 } adnMetricMaxHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The current maximum value for the high priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxHigh' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered." ::= { adnCalcCtlEntry 5 } adnMetricDefMid OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The mid-priority default cost metric value used for the specified Type Of Service (TOS), criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxMid' is equal to 'adnMetricDefMid'. This 'adnMetricDefMid' allows easy recall of exactly what the default value is." ::= { adnCalcCtlEntry 6 } adnMetricMaxMid OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The current maximum value for the mid-priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxMid' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered." ::= { adnCalcCtlEntry 7 } adnMetricDefLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The low-priority default cost metric value used for the specified Type Of Service, criterion. The default value is set up at initialization. Thus, initially, 'adnMetricMaxLow' is equal to 'adnMetricDefLow'. This 'adnMetricDefLow' allows easy recall of exactly what the default value is." ::= { adnCalcCtlEntry 8 } adnMetricMaxLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The current maximum value for the low-priority cost metric value. Initialized to a release specific default, SNMP changeable. The value of the object 'adnMetricMaxLow' is what is actually used by the routing software. A key use is to identify calculated paths 'too costly' to be considered." ::= { adnCalcCtlEntry 9 } adnNPhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnNPhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about the headers of the automatically built node-to-path tables, for all the types of service and criteria. These tables are used for establishing calls within the network." ::= { adnRoutesMIB 23 } adnNPhdrEntry OBJECT-TYPE SYNTAX AdnNPhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row provides information about the header of a specific automatically built node-to-path table." INDEX { adnTosIndex, adnRtsCritID } ::= { adnNPhdrTable 1 } AdnNPhdrEntry ::= SEQUENCE { adnNPhdrVer INTEGER, adnNPhdrStamp AdnNodeTimeStamp, adnNPhdrNum INTEGER (-2147483648..2147483647) } adnNPhdrVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Version number of the current node-to-path table." ::= { adnNPhdrEntry 1 } adnNPhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "Time-of-day stamp of the current node-to-path table." ::= { adnNPhdrEntry 2 } adnNPhdrNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Number of destination node entries in the node-to-path table." ::= { adnNPhdrEntry 3 } adnNPPathhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnNPPathhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines access to information in the destination node entry headers of the node-to-path table on the control unit. A destination node header of a node-to-path table entry gives summary information about that destination node's routing status. See the associated adnNodePathTable for the path information associated with each destination node of the adnNPPathhdrTable." ::= { adnRoutesMIB 24 } adnNPPathhdrEntry OBJECT-TYPE SYNTAX AdnNPPathhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnNPPathhdrTable provides all the information found in a table entry's header of the current node-to-path table on the control unit." INDEX { adnTosIndex, adnRtsCritID, adnDnodeIndex } ::= { adnNPPathhdrTable 1 } AdnNPPathhdrEntry ::= SEQUENCE { adnDnodeIndex AdnRoutingID, adnNPhdrIpAdr IpAddress, adnNPhdrNumPth INTEGER (-2147483648..2147483647), adnRemNodeMacNum INTEGER (-2147483648..2147483647), adnRemNodeAreaNum INTEGER (-2147483648..2147483647) } adnDnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "A destination node ID identifies an entry in the node-to-path table." ::= { adnNPPathhdrEntry 1 } adnNPhdrIpAdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the adjacent node." ::= { adnNPPathhdrEntry 2 } adnNPhdrNumPth OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Number of separate paths from the current node to the destination node; note that each path is uniquely associated with an adjacent node." ::= { adnNPPathhdrEntry 3 } adnRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnDnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnNPPathhdrEntry 4 } adnRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnDnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnNPPathhdrEntry 5 } adnNodePathTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnNodePathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines access to path information in a destination node entry of a current node-to-path table." ::= { adnRoutesMIB 25 } adnNodePathEntry OBJECT-TYPE SYNTAX AdnNodePathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnNodePathTable provides all the information in a particular path entry of the current node-to-path table on the control unit." INDEX { adnTosIndex, adnRtsCritID, adnDnodeIndex, adnNodePathIndex } ::= { adnNodePathTable 1 } AdnNodePathEntry ::= SEQUENCE { adnNodePathIndex INTEGER (-2147483648..2147483647), adnNodePathAdjNodeID AdnRoutingID, adnNodePathCostHigh INTEGER (-2147483648..2147483647), adnNodePathCostMid INTEGER (-2147483648..2147483647), adnNodePathCostLow INTEGER (-2147483648..2147483647), adnNodePathRemNodeMacNum INTEGER (-2147483648..2147483647), adnNodePathRemNodeAreaNum INTEGER (-2147483648..2147483647) } adnNodePathIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Number that identifies path order: first, second, third, etc. Number of paths in a node-to-path table entry is variable." ::= { adnNodePathEntry 1 } adnNodePathAdjNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "An adjacent node to which this node is connected." ::= { adnNodePathEntry 2 } adnNodePathCostHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The high priority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path." ::= { adnNodePathEntry 3 } adnNodePathCostMid OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The middle priority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path." ::= { adnNodePathEntry 4 } adnNodePathCostLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The lowpriority cost metric value for getting to this destination node using this path from 'adnNodePathAdjNodeID' node using this path." ::= { adnNodePathEntry 5 } adnNodePathRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnNodePathAdjNodeID, the routing node ID of the node at the remote endpoint." ::= { adnNodePathEntry 6 } adnNodePathRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnNodePathAdjNodeID, the routing node ID of the node at the remote endpoint." ::= { adnNodePathEntry 7 } adnAdjhdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAdjhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about the headers of the learned adjacency tables for all types of service." ::= { adnRoutesMIB 26 } adnAdjhdrEntry OBJECT-TYPE SYNTAX AdnAdjhdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row provides information about a header of a specific learned adjacency table." INDEX { adnTosIndex } ::= { adnAdjhdrTable 1 } AdnAdjhdrEntry ::= SEQUENCE { adnAdjhdrVer INTEGER (-2147483648..2147483647), adnAdjhdrStamp AdnNodeTimeStamp, adnAdjhdrNum INTEGER (-2147483648..2147483647) } adnAdjhdrVer OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Version number of a learned adjacency table. These numbers start at 1 and continue upwards - allows distinguishing older from newer copies." ::= { adnAdjhdrEntry 1 } adnAdjhdrStamp OBJECT-TYPE SYNTAX AdnNodeTimeStamp -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "Time-of-day stamp of a learned adjacency table." ::= { adnAdjhdrEntry 2 } adnAdjhdrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of adjacent node entries in a learned adjacency table." ::= { adnAdjhdrEntry 3 } adnAdjLinehdrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAjLinehdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Refers to the HSS routing services learned adjacency table on the control unit used to track adjacent connections, particularly for purposes of load balancing. Node-to-path table path entries reference the adjacency table. The adjacency header table provides access to the information in the adjacency table entry headers. See the related AdnAjLineTable for individual lines associated with a particular adjacent node header." ::= { adnRoutesMIB 27 } adnAjLinehdrEntry OBJECT-TYPE SYNTAX AdnAjLinehdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnAdjLinehdrTable provides key information about a particular adjacent node." INDEX { adnTosIndex, adnAnodeIndex } ::= { adnAdjLinehdrTable 1 } AdnAjLinehdrEntry ::= SEQUENCE { adnAnodeIndex AdnRoutingID, adnAdjNodetype INTEGER, adnAdjNumLines INTEGER, adnAdjNxtLine INTEGER, adnAdjNodeState INTEGER, adnAdjRemNodeMacNum INTEGER (-2147483648..2147483647), adnAdjRemNodeAreaNum INTEGER (-2147483648..2147483647), adnAdjTpxAddr OCTET STRING, adnAdjhdrIpAdr IpAddress } adnAnodeIndex OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "Each adjacent node ID identifies an entry in the adjacency table." ::= { adnAjLinehdrEntry 1 } adnAdjNodetype OBJECT-TYPE SYNTAX INTEGER { other(1), tpx(2), hss(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Node type can be TPX or HSS. Commonly used to distinguish interworking characteristics." ::= { adnAjLinehdrEntry 2 } adnAdjNumLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of available logical lines (channels) in the connection to this adjacent node." ::= { adnAjLinehdrEntry 3 } adnAdjNxtLine OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the next logical line to be used for routing message traffic; allows HSS routing services to spread the routing message traffic over all logical lines comprising the connection." ::= { adnAjLinehdrEntry 4 } adnAdjNodeState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), exchange(3), loading(4), full(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies a state that governs HSS routing services adjacency formation." ::= { adnAjLinehdrEntry 5 } adnAdjRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAnodeIndex, the routing node ID of the node at the remote endpoint." ::= { adnAjLinehdrEntry 6 } adnAdjRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAnodeIndex, the routing area number of the node at the remote endpoint." ::= { adnAjLinehdrEntry 7 } adnAdjTpxAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The adjacent TPX node's x121 Address. If adnAdjNodetype is not TPX the address is 00000.... " ::= { adnAjLinehdrEntry 8 } adnAdjhdrIpAdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the adjacent node. If the adjacent node does not have IP address then the value is 0.0.0.0 " ::= { adnAjLinehdrEntry 9 } adnAdjLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAdjLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Provides access to the line level information in the adjacency table for each adjacent node entry." ::= { adnRoutesMIB 28 } adnAdjLineEntry OBJECT-TYPE SYNTAX AdnAdjLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnAdjLineTable provides key information about a particular logical line (channel) to the adjacent node." INDEX { adnTosIndex, adnAnodeIndex, adnAdjLocIfIndex } ::= { adnAdjLineTable 1 } AdnAdjLineEntry ::= SEQUENCE { adnAdjLocIfIndex INTEGER (-2147483648..2147483647), adnAdjRemIfIndex INTEGER (-2147483648..2147483647), adnAdjMetricIDHigh AdnRoutingMetricType, adnAdjMetricCostHigh INTEGER (-2147483648..2147483647), adnAdjMetricIDMid AdnRoutingMetricType, adnAdjMetricCostMid INTEGER (-2147483648..2147483647), adnAdjMetricIDLow AdnRoutingMetricType, adnAdjMetricCostLow INTEGER (-2147483648..2147483647), adnAdjRemTpxTci INTEGER } adnAdjLocIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "Uniquely identifies a network interface within a node." ::= { adnAdjLineEntry 1 } adnAdjRemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies a network interface within the remote node. If the remote node is a TPX, this object identifies the T1 interface identifier." ::= { adnAdjLineEntry 2 } adnAdjMetricIDHigh OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "High priority cost metric ID for this link entry." ::= { adnAdjLineEntry 3 } adnAdjMetricCostHigh OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "High priority cost metric for this link entry." ::= { adnAdjLineEntry 4 } adnAdjMetricIDMid OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "Mid priority cost metric ID for this link entry." ::= { adnAdjLineEntry 5 } adnAdjMetricCostMid OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS Cost ACCESS read-only STATUS mandatory DESCRIPTION "Mid priority cost metric for this link entry." ::= { adnAdjLineEntry 6 } adnAdjMetricIDLow OBJECT-TYPE SYNTAX AdnRoutingMetricType ACCESS read-only STATUS mandatory DESCRIPTION "Low priority cost metric ID for this link entry." ::= { adnAdjLineEntry 7 } adnAdjMetricCostLow OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Low priority cost metric for this link entry." ::= { adnAdjLineEntry 8 } adnAdjRemTpxTci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the value of remote TPX TCI (TPX Channel Indicator) which corresponds to this ifIndex." ::= { adnAdjLineEntry 9 } adnMsgMonTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnMsgMonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "General parameters used by the routing services for routing message handling." ::= { adnRoutesMIB 29 } adnMsgMonEntry OBJECT-TYPE SYNTAX AdnMsgMonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) of the adnMsgMonTable provides the general parameters used by the routing services for routing message handling for a specific type of service." INDEX { adnTosIndex } ::= { adnMsgMonTable 1 } AdnMsgMonEntry ::= SEQUENCE { adnRtsMinTimeBetLS INTEGER (-2147483648..2147483647), adnRtsbroadcastLSU INTEGER, adnRtsLSUbroadcastfreez INTEGER, adnRtsTblDistfreez INTEGER } adnRtsMinTimeBetLS OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "Minimum time between self-generated link state messages for the node." ::= { adnMsgMonEntry 1 } adnRtsbroadcastLSU OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "If active, a trigger for a one shot link state update broadcast for this node. The status is reset to inactive when done." ::= { adnMsgMonEntry 2 } adnRtsLSUbroadcastfreez OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of the link state update processing. When the status is active, no link state update for the node is broadcast for a period of time." ::= { adnMsgMonEntry 3 } adnRtsTblDistfreez OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), inactive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of the table distribution processor. When the status is active, the table distributions sent to a coupler card are frozen." ::= { adnMsgMonEntry 4 } adnRtsMHStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnRtsMHStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics regarding Routes Message Handler activity associated with particular network nodes, by Type Of Service(TOS), are provided in this table." ::= { adnRoutesMIB 30 } adnRtsMHStatsEntry OBJECT-TYPE SYNTAX AdnRtsMHStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnRtsMHStatsTable provides node level statistics." INDEX { adnTosIndex, adnDnodeIndex } ::= { adnRtsMHStatsTable 1 } AdnRtsMHStatsEntry ::= SEQUENCE { adnRtsMHTotLSU INTEGER (-2147483648..2147483647), adnRtsMHTotDupLSU INTEGER (-2147483648..2147483647), adnRtsMHTotOldLSU INTEGER (-2147483648..2147483647) } adnRtsMHTotLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state update messages received from the specified node." ::= { adnRtsMHStatsEntry 1 } adnRtsMHTotDupLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of duplicate link state update messages, received from the specified node, that were discarded." ::= { adnRtsMHStatsEntry 2 } adnRtsMHTotOldLSU OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state update messages received from the specified node, that were too old and had to be discarded." ::= { adnRtsMHStatsEntry 3 } adnLocalAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Represents the HSS routing services local address table on the control unit and provides access to information used to complete call routing to an access point within the current node." ::= { adnRoutesMIB 31 } adnLocalAddrEntry OBJECT-TYPE SYNTAX AdnLocalAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry (row) in the adnLocalAddrTable maps a (local) address supported in the node to a local interface." INDEX { adnNumPlanIndex, adnLocalAddrIndex, adnLocalAddrNumIfIndex } ::= { adnLocalAddrTable 1 } AdnLocalAddrEntry ::= SEQUENCE { adnLocalAddrIndex OCTET STRING, adnLocalAddrNumIfIndex INTEGER (-2147483648..2147483647), adnLocalAddrIfIndex INTEGER (-2147483648..2147483647) } adnLocalAddrIndex OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Address, maintained as ASCII decimal." ::= { adnLocalAddrEntry 1 } adnLocalAddrNumIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS obsolete DESCRIPTION "Number of ifindex per local address end point or Interface number at the routing completion point." ::= { adnLocalAddrEntry 2 } adnLocalAddrIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Value of Interface Index for each Local Address." ::= { adnLocalAddrEntry 3 } adnRtsGlobalGroup OBJECT IDENTIFIER ::= { adnRoutesMIB 32 } adnRtsDefaultNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-write STATUS mandatory DESCRIPTION "This routing node ID is used if there is no matching entry (exact or partial) for a destination address in the address to node table (adnAnTable). This is created in response to CDC # 8447 to add 'sink address' feature for IISP. The default value is '0'." ::= { adnRtsGlobalGroup 1 } adnSfasMIB OBJECT IDENTIFIER ::= { adnProprietary 9 } adnSaSystem OBJECT IDENTIFIER ::= { adnSfasMIB 1 } adnNodeTime OBJECT-TYPE SYNTAX AdnNodeTimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the current Coordinated Universal Time (UTC) expressed in elapsed seconds by reading the UTC real-time clock on the control unit (CU) board." ::= { adnSaSystem 1 } adnNodeResyncTrap OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent needs to send adnNodeResync traps. This object is set to true whenever the control unit (CU) board is reinitialized. The SNMP agent keeps sending adnNodeResync traps until the NMS acknowledges the trap by sending an SNMP Set request to reset this object." DEFVAL { false } ::= { adnSaSystem 2 } adnSaConfigFrom OBJECT-TYPE SYNTAX INTEGER { nms(1), hit(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value is used to indicate whether the node has been fully configured from the NMS, or whether the node has been installed for the first time using an HSS installation tool. In the case that an HSS installation tool was used to configure the HSS (either the HSS Installation Tool called HIT, or OSCAR, the On-Site Configuration And Restart tool), the full set of configuration files has not yet been downloaded to the node from the Network Management System." DEFVAL { nms } ::= { adnSaSystem 3 } adnSaViews OBJECT IDENTIFIER ::= { adnSfasMIB 2 } adnViewTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnViewEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Customer Network Management (CNM) View table which contains an additional object for the Context table." ::= { adnSaViews 1 } adnViewEntry OBJECT-TYPE SYNTAX AdnViewEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing Customer Network Management (CNM) view information applicable to a particular context." -- AUGMENTS { contextEntry } ::= { adnViewTable 1 } AdnViewEntry ::= SEQUENCE { adnViewIndex INTEGER (-2147483648..2147483647) } adnViewIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of an instance of this object is greater than zero, then this corresponding conceptual row in the contextTable refers to a Customer Network Management (CNM) view. The value of the instance identifies the particular CNM view which has the same value as the instance of the adnCnmIndex object. If the value of an instance of this object is zero, then there is no CNM view." ::= { adnViewEntry 1 } adnCnmTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCnmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Customer Network Management (CNM) database." ::= { adnSaViews 2 } adnCnmEntry OBJECT-TYPE SYNTAX AdnCnmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing information on a particular family of Customer Network Management (CNM) interfaces." INDEX { adnCnmIndex, adnCnmIfIndex } ::= { adnCnmTable 1 } AdnCnmEntry ::= SEQUENCE { adnCnmIndex INTEGER, adnCnmIfIndex INTEGER (-2147483648..2147483647), adnCnmAccess INTEGER, adnCnmType INTEGER } adnCnmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each Customer Network Management (CNM) view. The value for each CNM view must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { adnCnmEntry 1 } adnCnmIfIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is equal to MIB II's ifIndex value. This Customer Network Management (CNM) interface should be a physical line or channel." ::= { adnCnmEntry 2 } adnCnmAccess OBJECT-TYPE SYNTAX INTEGER { none(1), read(2), write(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The access type of a particular family of Customer Network Management (CNM) interfaces within the particular CNM view. The value 'none(1)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface which is not accessible. The value 'read(2)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface which is read-only. The value 'write(3)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface with read-write permissions." ::= { adnCnmEntry 3 } adnCnmType OBJECT-TYPE SYNTAX INTEGER { included(1), excluded(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of a particular family of Customer Network Management (CNM) interfaces within the particular CNM view. The value 'included(1)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface included in the CNM view. The value 'excluded(2)' indicates that the corresponding instance of adnCnmIfIndex defines a CNM interface excluded from the CNM view." ::= { adnCnmEntry 4 } adnSaTrapFilter OBJECT IDENTIFIER ::= { adnSfasMIB 3 } adnTrapEnableCritical OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate critical traps. The value of this object provides a means whereby all critical traps may be disabled. Common name: Send Critical Traps." DEFVAL { enabled } ::= { adnSaTrapFilter 1 } adnTrapEnableMajor OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate major traps. The value of this object provides a means whereby all major traps may be disabled. Common name: Send Major Traps." DEFVAL { enabled } ::= { adnSaTrapFilter 2 } adnTrapEnableMinor OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate minor traps. The value of this object provides a means whereby all minor traps may be disabled. Common name: Send Minor Traps." DEFVAL { enabled } ::= { adnSaTrapFilter 3 } adnTrapEnableStr OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate STR (Software Trouble Report) traps. The value of this object provides a means whereby all STR traps may be disabled. Common name: Send SW Trouble Traps." DEFVAL { disabled } ::= { adnSaTrapFilter 4 } adnTrapEnableDiagnostic OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate diagnostic traps. The value of this object provides a means whereby all diagnostic traps may be disabled. Common name: Send Diagnostic Traps." DEFVAL { disabled } ::= { adnSaTrapFilter 5 } adnTrapEnableCleared OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent is permitted to generate cleared traps. The value of this object provides a means whereby all cleared traps may be disabled. Common name: Trap Enable Cleared." DEFVAL { enabled } ::= { adnSaTrapFilter 6 } adnSaUtility OBJECT IDENTIFIER ::= { adnSfasMIB 4 } adnSaSnmpTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the length of the SNMP response timer, measured in seconds. The timer starts on receipt of an SNMP request. If an SNMP response cannot be returned to the NMS within that time, the SNMP command fails." DEFVAL { 8 } ::= { adnSaUtility 1 } adnSaInmpTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the length of the Internal Network Management Protocol (INMP) response timer, measured in seconds. The timer starts whenever an INMP command is sent to another subsystem. If no reply is received within that time, the INMP command fails. The value of this object should be less than the value of adnSaSnmpTimer." DEFVAL { 3 } ::= { adnSaUtility 2 } adnSaMibMgt OBJECT IDENTIFIER ::= { adnSfasMIB 5 } adnSaMIBFilePathName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the path and filename of the MIB template that is loaded in the agent." ::= { adnSaMibMgt 1 } adnSaQtpGroup OBJECT IDENTIFIER ::= { adnSfasMIB 6 } adnSaQtpInitial OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the Quick Transfer Protocol is being initialized for a new sequence of SNMP Set messages. This value is set to true by the NMS in the first SNMP Set command of a sequence used to transfer a group of configuration files. The HSS resets the value of this object back to false immediately." DEFVAL { false } ::= { adnSaQtpGroup 1 } adnSaQtpFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the filename of a configuration file that is to be created by the SNMP Agent." ::= { adnSaQtpGroup 2 } adnSaQtpFileContents OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is an octet string containing the contents of a configuration file that is to be created by the SNMP Agent. The file will be named according to the value of adnSaQtpFileName." ::= { adnSaQtpGroup 3 } adnSaLoggedTrapTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSaLoggedTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SNMP Agent logged trap table. The SNMP Agent logs in this table the last several traps (up to a maximum of 10) sent from the agent to each destination party. The 1100 NMS will use the trap sequence number information to detect lost traps (from a discontinuity in the received sequence numbers, e.g., number 17 followed by number 20), and will then send an SNMP command to the HSS SNMP Agent to request replay of any lost traps (e.g., 18 and 19). The Logged Trap Table is a circular list. When the maximum capacity is reached (the maximum number of traps are already logged), then the next trap sent out overwrites the oldest trap in the Logged Trap Table. If a request is received to replay more traps than are stored in the Logged Trap Table, then the request will be refused with the SNMP error code genErr(5). The Logged Trap Table is cleared upon HSS CU restart." ::= { adnSfasMIB 7 } adnSaLoggedTrapEntry OBJECT-TYPE SYNTAX AdnSaLoggedTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single trap in the log. Entries in this table are created automatically by the SNMP Agent whenever a trap is sent out." INDEX { adnSaLoggedTrapPartyIndex, adnSaLoggedTrapIndex } ::= { adnSaLoggedTrapTable 1 } AdnSaLoggedTrapEntry ::= SEQUENCE { adnSaLoggedTrapPartyIndex INTEGER, adnSaLoggedTrapIndex INTEGER, adnSaLoggedTrapCategory INTEGER } adnSaLoggedTrapPartyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of partyIndex for the manager to whom the logged trap was sent. This uniquely identifies the receiving manager. The adnSaLoggedTrapPartyIndex and the adnSaLoggedTrapIndex sequence number together uniquely identify the logged trap." ::= { adnSaLoggedTrapEntry 1 } adnSaLoggedTrapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trap sequence number of the logged trap. This object takes the value of the snmpTrapNumbers variable of the logged trap that it references. The adnSaLoggedTrapIndex sequence number and the adnSaLoggedTrapPartyIndex together uniquely identify the logged trap." ::= { adnSaLoggedTrapEntry 2 } adnSaLoggedTrapCategory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The category of the logged trap. This object takes the value of the adnTrapCategory variable of the logged trap that is referenced by adnSaLoggedTrapIndex and adnSaLoggedTrapPartyIndex." ::= { adnSaLoggedTrapEntry 3 } adnSaLoggedTrapReplayTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSaLoggedTrapReplayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SNMP Agent logged trap replay table. The 1100 NMS SNMP Manager uses this table to request retransmission from the SNMP agent of any traps which are stored in the Logged Trap Table. The 1100 NMS sends an SNMP Set command, specifying a starting sequence number and an ending sequence number (e.g., 18 and 19). Both sequence numbers must be present in the Logged Trap Table for the command to be successful. The SNMP Set command to request replay of traps must contain each of the following objects in this order: adnSaLoggedTrapReplayFirst, adnSaLoggedTrapReplayLast, adnSaLoggedTrapReplayOn. If one of the objects is missing, or the order is incorrect, an error response will be returned with an SNMP error code of genErr(5). If both starting and ending sequence numbers are found in the Logged Traps Table, the SNMP Agent will then replay the traps, starting with the first one specified, and ending with the last one specified. If the value of adnSaLoggedTrapReplayFirst is equal to adnSaLoggedTrapReplayLast, then only one trap is replayed. The ending sequence number may have a lower value than the starting sequence number, in the case that the trap sequence number has reached its maximum and rolled over through zero. The SNMP Agent will look in the adnSaLoggedTrapTable using the value given in the SNMP Set request for adnSaLoggedTrapReplayPartyIndex as the adnSaLoggedTrapPartyIndex, and using the value of adnSaLoggedTrapReplayFirst as the adnSaLoggedTrapIndex. If the first trap is found in the adnSaLoggedTrapTable, then the SNMP Agent will look for the last trap to be replayed, using the value of adnSaLoggedTrapReplayLast as the adnSaLoggedTrapIndex. If either the first trap to be replayed or the last trap to be replayed cannot be found in the adnSaLoggedTrapTable, then an error response is returned with an SNMP error code of genErr(5). The value of adnSaLoggedTrapReplayOn is set to enabled by the 1100 NMS in the Set command, and is reset to disabled by the SNMP Agent when the command has been processed. If the procesing of the command identifies any traps to be replayed, then these are all sent out immediately by the SNMP Agent." ::= { adnSfasMIB 8 } adnSaLoggedTrapReplayEntry OBJECT-TYPE SYNTAX AdnSaLoggedTrapReplayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information corresponding to a replay request from an SNMP Manager." INDEX { adnSaLoggedTrapReplayPartyIndex } ::= { adnSaLoggedTrapReplayTable 1 } AdnSaLoggedTrapReplayEntry ::= SEQUENCE { adnSaLoggedTrapReplayPartyIndex INTEGER, adnSaLoggedTrapReplayFirst INTEGER, adnSaLoggedTrapReplayLast INTEGER, adnSaLoggedTrapReplayOn AdnEnableDisabled } adnSaLoggedTrapReplayPartyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of partyIndex for the manager to whom the logged traps were originally sent, and who is now requesting the replay." ::= { adnSaLoggedTrapReplayEntry 1 } adnSaLoggedTrapReplayFirst OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The trap sequence number of the first trap in a sequence of one or more logged traps to be replayed. This object takes the value of the snmpTrapNumbers variable of the first trap being requested. The SNMP Agent will look in the adnSaLoggedTrapTable using the given value of adnSaLoggedTrapReplayPartyIndex in the SNMP Set request as the adnSaLoggedTrapPartyIndex, and using the value of this object as adnSaLoggedTrapIndex. After processing a replay command, the SNMP Agent resets this value back to zero." DEFVAL { 0 } ::= { adnSaLoggedTrapReplayEntry 2 } adnSaLoggedTrapReplayLast OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The trap sequence number of the last trap in a sequence of one or more logged traps to be replayed. This object takes the value of the snmpTrapNumbers variable of the last trap being requested. The SNMP Agent will look in the adnSaLoggedTrapTable using the given value of adnSaLoggedTrapReplayPartyIndex in the SNMP Set request as the adnSaLoggedTrapPartyIndex, and using the value of this object as adnSaLoggedTrapIndex. After processing a replay command, the SNMP Agent resets this value back to zero." DEFVAL { 0 } ::= { adnSaLoggedTrapReplayEntry 3 } adnSaLoggedTrapReplayOn OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This object is set to a value of enabled by the 1100 NMS to request trap replay. Traps numbered between adnSaLoggedTrapReplayFirst and adnSaLoggedTrapReplayLast are sent by the SNMP Agent to the manager identified by adnSaLoggedTrapReplayPartyIndex. The SNMP Agent resets this value to disabled after processing the request." DEFVAL { disabled } ::= { adnSaLoggedTrapReplayEntry 4 } adnLdrMIB OBJECT IDENTIFIER ::= { adnProprietary 10 } adnLdrChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLdrChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the fields supported by all the line drivers. It contains configuration, control and statistics information for the channel." ::= { adnLdrMIB 1 } adnLdrChanEntry OBJECT-TYPE SYNTAX AdnLdrChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the line driver (LDR) table. There is one entry for each LDR channel configured." INDEX { ifIndex } ::= { adnLdrChanTable 1 } AdnLdrChanEntry ::= SEQUENCE { adnLdrChanType INTEGER, adnLdrChanStatisticsFlag AdnEnableDisabled, adnLdrChanSubFrameIN Counter, adnLdrChanAbortIN Counter, adnLdrChanCrcErrIN Counter, adnLdrChanOverRunErrIN Counter, adnLdrChanOctetAlignErrIN Counter, adnLdrChanBusyErrIN Counter, adnLdrChanAbortOUT Counter, adnLdrChanUnderRunErrOUT Counter, adnLdrChanNumOfFlags INTEGER, adnLdrChanFlagOrIdle INTEGER, adnLdrChanTimeSlotMask INTEGER, adnLdrChanFramed INTEGER, adnLdrChanCosRtOutOctets Counter, adnLdrChanCosRtOutPkts Counter, adnLdrChanCosRtOutErrors Counter, adnLdrChanCosNrtOutOctets Counter, adnLdrChanCosNrtOutPkts Counter, adnLdrChanCosNrtOutErrors Counter } adnLdrChanType OBJECT-TYPE SYNTAX INTEGER { vSeries(1), g703(2), flip(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of line driver to which the channel belongs." ::= { adnLdrChanEntry 1 } adnLdrChanStatisticsFlag OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Flag indicates if statistics is enabled on this channel. Common Name: Statistics" DEFVAL { enabled } ::= { adnLdrChanEntry 2 } adnLdrChanSubFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sub-frames received by the line driver." ::= { adnLdrChanEntry 3 } adnLdrChanAbortIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received frames aborted (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortAbortedFrames in the rs232SyncPortTable for the v-series line driver." ::= { adnLdrChanEntry 4 } adnLdrChanCrcErrIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received with a CRC errors (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortFrameCheckErr in the rs232SyncPortTable for the v-series line driver." ::= { adnLdrChanEntry 5 } adnLdrChanOverRunErrIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sub-frames received which have overrun errors (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortReceiveOverrunErrs in the rs232SyncPortTable for the v-series line driver." ::= { adnLdrChanEntry 6 } adnLdrChanOctetAlignErrIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sub-frames received with misaligned octet errors." ::= { adnLdrChanEntry 7 } adnLdrChanBusyErrIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sub-frames received which have the busy error." ::= { adnLdrChanEntry 8 } adnLdrChanAbortOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of aborts that occurred during transmission (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series (RS232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortInterruptedFrames in the rs232SyncPortTable for the v-series line driver." ::= { adnLdrChanEntry 9 } adnLdrChanUnderRunErrOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of underrun error that occurred during transmission (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortTransmitUnderrunErrs in the rs232SyncPortTable for the v-series Line Driver (LDR)." ::= { adnLdrChanEntry 10 } adnLdrChanNumOfFlags OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The minimum number of flags to recognize the end of one frame and the start of the next (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero. This object has the same value as rs232SyncPortMinFlags in the rs232SyncPortTable for the v-series Line Driver(LDR)." DEFVAL { 1 } ::= { adnLdrChanEntry 11 } adnLdrChanFlagOrIdle OBJECT-TYPE SYNTAX INTEGER { flag(1), idle(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether flags or idle code is used between frames. Common Name: Flags or Idle Between Frames" ::= { adnLdrChanEntry 12 } adnLdrChanTimeSlotMask OBJECT-TYPE SYNTAX INTEGER { clear64kbps(0), b8jam56kbps(1), b7jam56kbps(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This defines the bit location for framed subrate channels (G.703 (DS1 or E1) line driver only). This object is not relevant to the v-series or FLIP (fake line internal preocess) line drivers which will respond to an SNMP Get command with a value of zero. This object is related to dsx1LineCoding in the DS1/E1 MIB. For B8ZS (Binary-8 Zero Suppression) and HDB3 (ITU G.703 standard for E1 lines), the usual value is clear64Kbps, but the user can change this to any value. For AMI (Alternate Mark Inversion), the usual value is b8jam56Kbps, but the user can change this to any value except clear64Kbps (because it would violate pulse density). Note that the numerical values of adnLdrChanTimeSlotMask have been chosen so that they correspond to the one's complement of the bit mask used by the hardware. clear64Kbps = Binary 00000000 b8jam56Kbps = Binary 00000001 b7jam56Kbps = Binary 00000010 Any additions to this object's values should follow the same principle. Common Name: Pulse Density Mask" DEFVAL { clear64Kbps } ::= { adnLdrChanEntry 13 } adnLdrChanFramed OBJECT-TYPE SYNTAX INTEGER { framed(1), unframed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the G.703 (DS1 or E1) interface is framed or unframed (G.703 line driver only). This object is not relevant to the v-series (RS-232, V.35, V.36, or X.21) or FLIP (fake line internal process) line drivers which will respond to an SNMP Get command with a value of zero." DEFVAL { framed } ::= { adnLdrChanEntry 14 } adnLdrChanCosRtOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Real-time Class of Service Octets transmitted by the line driver." ::= { adnLdrChanEntry 15 } adnLdrChanCosRtOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Real-time Class of Service packets (frame or subframes) transmitted by the line driver." ::= { adnLdrChanEntry 16 } adnLdrChanCosRtOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of errors while transmitting Real-time Class of Service data by the line driver." ::= { adnLdrChanEntry 17 } adnLdrChanCosNrtOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Non-real-time Class of Service Octets transmitted by the line driver." ::= { adnLdrChanEntry 18 } adnLdrChanCosNrtOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Non-real-time Class of Service packets (frame or subframes) transmitted by the line driver." ::= { adnLdrChanEntry 19 } adnLdrChanCosNrtOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of errors while transmitting Non-real-time Class of Service data by the line driver." ::= { adnLdrChanEntry 20 } adnNmgsMIB OBJECT IDENTIFIER ::= { adnProprietary 11 } adnAmGroup OBJECT IDENTIFIER ::= { adnNmgsMIB 1 } adnFmGroup OBJECT IDENTIFIER ::= { adnNmgsMIB 2 } adnPmHsGroup OBJECT IDENTIFIER ::= { adnNmgsMIB 3 } adnPmIsGroup OBJECT IDENTIFIER ::= { adnNmgsMIB 4 } adnDumGroup OBJECT IDENTIFIER ::= { adnNmgsMIB 5 } adnAmEnableAccounting OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether accounting data is collected and processed for all subscribing applications on the node by the Node Management Subsystem. Common Name: Node Accounting" DEFVAL { enabled } ::= { adnAmGroup 1 } adnAmCollectInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-write STATUS mandatory DESCRIPTION "Defines the time period between collections of accounting data. The unit of time for this interval is minutes. Common Name: Acctg Collection Interval" DEFVAL { 180 } ::= { adnAmGroup 2 } adnAmPostInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-write STATUS mandatory DESCRIPTION "Defines a time period between transfers of the accounting data file to the Network Management System directory. After each transfer, the Network Management System is also notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only accounting data collected since the last posting. The unit of time for this interval is minutes. Common Name: Acctg Posting Interval" DEFVAL { 720 } ::= { adnAmGroup 3 } adnAmPostAccounting OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "When adnAmPostAccounting is enabled, a file containing the current accounting data is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all the accounting data collected since the lasting posting." DEFVAL { disabled } ::= { adnAmGroup 4 } adnAmMakeAccounting OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "When adnAmMakeAccounting is enabled, the accounting data from all applications that have registered for the service are requested and collected in a common file. After waiting the time interval defined in adnAmMakeAccountingWindow to receive all responses, the accounting file is transferred to the Network Management System directory and the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services." DEFVAL { disabled } ::= { adnAmGroup 5 } adnAmMakeAccountingWindow OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "When adnAmMakeAccounting is enabled, accounting data is requested from all applications that have registered for this service. adnAmMakeAccountingWindow is the time interval during which responses to these requests are accepted. adnAmMakeAccountingWindow is specified in units of seconds. Common Name: Make Acctg Window" DEFVAL { 120 } ::= { adnAmGroup 6 } adnAmAccountingFilePathName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The complete pathname of the current accounting file in the Network Management System directory which contains accounting data collected since the last posting. The complete pathname starts with and includes the root directory." ::= { adnAmGroup 7 } adnFmSaveCrucialAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether crucial alarms received from applications are saved in the alarm file. Common Name: Save Crucial Alarms" DEFVAL { disabled } ::= { adnFmGroup 1 } adnFmSaveAdminAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether administrative alarms received from applications are saved in the alarm file. Common Name: Save Admin Alarms" DEFVAL { enabled } ::= { adnFmGroup 2 } adnFmSaveCriticalAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether critical alarms received from applications are saved in the alarm file. Common Name: Save Critical Alarms" DEFVAL { enabled } ::= { adnFmGroup 3 } adnFmSaveMajorAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether major alarms received from applications are saved in the alarm file. Common Name: Save Major Alarms" DEFVAL { enabled } ::= { adnFmGroup 4 } adnFmSaveMinorAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether minor alarms received from applications are saved in the alarm file. Common Name: Save Minor Alarms" DEFVAL { enabled } ::= { adnFmGroup 5 } adnFmSaveTroubleAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether trouble alarms received from applications are saved in the alarm file. Common Name: Save Trouble Alarms" DEFVAL { enabled } ::= { adnFmGroup 6 } adnFmSaveDiagnosticAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether diagnostic alarms received from applications are saved in the alarm file. Common Name: Save Diagnostic Alarms" DEFVAL { enabled } ::= { adnFmGroup 7 } adnFmSaveClearedAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether cleared alarms received from applications are saved in the alarm file. Common Name: Save Cleared Alarms" DEFVAL { enabled } ::= { adnFmGroup 8 } adnFmAlarmPostInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-write STATUS mandatory DESCRIPTION "Defines a time period between transfers of the alarm file to the Network Management System directory. After each transfer, the Network Management System is also notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only those alarms collected since the last posting. The unit of time for this interval is minutes. Common Name: Alarm Posting Interval" DEFVAL { 720 } ::= { adnFmGroup 9 } adnFmPostAlarm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "When adnFmPostAlarm is enabled, the current file is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all alarms saved since the lasting posting." DEFVAL { disabled } ::= { adnFmGroup 10 } adnFmAlarmFilePathName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The complete pathname of the current alarm file in the Network Management System directory which contains all alarms collected since the last posting. The complete pathname starts with and includes the root directory." ::= { adnFmGroup 11 } adnPmHsEnableStats OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether historical statistics are collected and processed for all subscribing applications on the node by the Node Management Subsystem. Common Name: Historical Stats Collection" DEFVAL { enabled } ::= { adnPmHsGroup 1 } adnPmHsCollectInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-write STATUS mandatory DESCRIPTION "Defines the time period between collections of historical statistics. The unit of time for this interval is minutes. Common Name: Historical Stat Collect Timer" DEFVAL { 180 } ::= { adnPmHsGroup 2 } adnPmHsPostInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-write STATUS mandatory DESCRIPTION "Defines a time period between transfers of the historical statistics file to the Network Management System directory. After each transfer, the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. Each posting contains only those historical statistics collected since the last posting. The unit of time for this interval is minutes. Common Name: Historical Stats Post Timer" DEFVAL { 720 } ::= { adnPmHsGroup 3 } adnPmHsPostStats OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "When adnPmHsPostStats is enabled, a file containing the current historical statistics is transferred to the Network Management System directory and the Network Management System is subsequently notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services. This file contains all the historical statistics collected since the last posting." DEFVAL { disabled } ::= { adnPmHsGroup 4 } adnPmHsMakeStats OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "When adnPmHsMakeStats is enabled, historical statistics from all applications that have registered for the service are requested and collected in a common statistics file. After waiting the time interval defined in adnPmHsMakeStatsWindow to receive all responses, the statistics file is transferred to the Network Management System directory and the Network Management System is notified via a SNMP trap that this file is ready for transfer to the Network Management System via FTP services." DEFVAL { disabled } ::= { adnPmHsGroup 5 } adnPmHsMakeStatsWindow OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "When adnPmHsMakeStats is enabled, historical statistics are requested from all applications that have registered for this service. adnPmHsMakeStatsWindow is the time interval during which responses to these requests are accepted. adnPmHsMakeStatsWindow is specified in units of seconds. Common Name: Make Historical Stats Window" DEFVAL { 120 } ::= { adnPmHsGroup 6 } adnPmHsFilePathName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The complete pathname of the current historical statistics file in the Network Management System directory which contains all historical statistics collected since the last posting. The complete pathname starts with and includes the root directory." ::= { adnPmHsGroup 7 } adnPmIsEnableStatsCollection OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether interval statistics are collected from all subscribing applications on the node by the Node Management Subsystem. Common Name: Interval Stats Collection" DEFVAL { enabled } ::= { adnPmIsGroup 1 } adnPmIsCurrentInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS Current Interval ACCESS read-only STATUS mandatory DESCRIPTION "One of 96 discrete time intervals (or buckets) into which the interval statistics are being collected." ::= { adnPmIsGroup 2 } adnDumEnable OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables all Disk Utilization Management processing." DEFVAL { enabled } ::= { adnDumGroup 1 } adnDumReduceExcessDiskStorage OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables all methods to reduce excessive disk storage in Disk Utilization Management managed filesystems. Methods of reduction consist of those defined by adnDumCyclicallyReduceExcess and adnDumImmediatelyReduceExcess. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup." DEFVAL { enabled } ::= { adnDumGroup 2 } adnDumCyclicallyReduceExcess OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables the cyclical reduction of excess disk storage in Disk Utilization Management's managed filesytems. Disk Utilization Management's reduction process is an adjunct of its monitoring process. The periodicity of both processes is defined by adnDumMonitorInterval. The Disk Utilization Management's managed filesystems are also defined in adnDumGroup." DEFVAL { enabled } ::= { adnDumGroup 3 } adnDumImmediatelyReduceExcess OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables the immediate reduction of excessive disk storage in Disk Utilization Management's managed filesystems. Independent of its monitoring cycle, Disk Utilization Management immediately reduces excessive disk storage. Once the excess storage is reduced, Disk Utilization Management effectively sets this object to disabled. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup." DEFVAL { disabled } ::= { adnDumGroup 4 } adnDumFlagThresholdViolations OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables Disk Utilization Management's notification to the Network Management System of threshold violations from Disk Utilization Management's managed filesystems. Disk Utilization Management notifies the Network Management System via a Simple Network Management Protocol trap. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup." DEFVAL { enabled } ::= { adnDumGroup 5 } adnDumFlagFileReady OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables Disk Utilization Management's notification to the Network Management System of overdue file retrievals from Disk Utilization Management's managed filesystems. If file retrievals are not completed within the limit, adnDumFileRetrievalTimeLimit, Disk Utilization Management considers the retrievals overdue and notifies the Network Management System via a Simple Network Management Protocol trap. The Disk Utilization Management's managed filesystems are also defined in the adnDumGroup." DEFVAL { enabled } ::= { adnDumGroup 6 } adnDumLogEvents OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Enables and disables Disk Utilization Management's maintenance of a history log file in which Disk Utilization Management events are recorded. The history log file is in an ASCII format." DEFVAL { enabled } ::= { adnDumGroup 7 } adnDumMonitorInterval OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "Defines the period of time between disk monitoring by Disk Utilization Management. The unit of time for this interval is seconds." DEFVAL { 300 } ::= { adnDumGroup 8 } adnDumFileRetrievalTimeLimit OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-write STATUS mandatory DESCRIPTION "Defines the time period that Disk Utilization Management allows the Network Management System to retrieve files from Disk Utilization Management's managed filesystems, before determining that a reminder trap is required. The unit of time for this interval is seconds." DEFVAL { 360 } ::= { adnDumGroup 9 } adnDumDirectoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDumDirectoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Disk Utilization Management Directory Table defines the directories and subdirectories on which the filesytems that Disk Utilization Management manages are mounted. By default, the only filesystem monitored for disk utilization is /hss (which also contains /to_nms)." ::= { adnDumGroup 10 } adnDumDirectoryEntry OBJECT-TYPE SYNTAX AdnDumDirectoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Disk Utilization Management Directory Table that defines one directory and any subdirectories under the directory." INDEX { adnDumDirectoryIndex } ::= { adnDumDirectoryTable 1 } AdnDumDirectoryEntry ::= SEQUENCE { adnDumDirectoryIndex INTEGER, adnDumDirectoryPathname DisplayString, adnDumDirectoryPercentUsage AdnPercent, adnDumDirectoryLevelUsage INTEGER, adnDumUsageThresholds INTEGER } adnDumDirectoryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Index to a table of directories on which Disk Utilization Management managed filesystems have been mounted." ::= { adnDumDirectoryEntry 1 } adnDumDirectoryPathname OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The complete pathname to the directory on which a managed filesystem is mounted. The complete pathname starts with and includes the root directory. By default, the directory /hss is monitored. This includes the directory /to_nms." ::= { adnDumDirectoryEntry 2 } adnDumDirectoryPercentUsage OBJECT-TYPE SYNTAX AdnPercent ACCESS read-only STATUS mandatory DESCRIPTION "The percent of the aggregate disk storage that is used in the directory on which the filesystem is mounted." DEFVAL { 100 } ::= { adnDumDirectoryEntry 3 } adnDumDirectoryLevelUsage OBJECT-TYPE SYNTAX INTEGER { belowLow(1), lowToMedium(2), mediumToHigh(3), abovehigh(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The level of usage of aggregate disk storage with respect to the three usage thresholds, low, medium and high, in the directory on which the filesystem is mounted." DEFVAL { 1 } ::= { adnDumDirectoryEntry 4 } adnDumUsageThresholds OBJECT-TYPE SYNTAX INTEGER { low60med70high80(1), low70med80high90(2), low85med90high95(3), low90med95high99(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A set of low, medium and high limits to the amount of the aggregate disk storage that is utilized in a managed filesystem. Each value represents a percentage of the whole amount that is allocated to the particular filesystem." DEFVAL { low70med80high90 } ::= { adnDumDirectoryEntry 5 } adnDumSubdirectoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDumSubdirectoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Disk Utilization Management Subdirectory Table defines the subdirectories under a Disk Utilization Management directory. A filesytem that Disk Utilization Management manages is mounted on the Disk Utilization Management directory. By default, the subdirectories under /hss which are monitored are: /hss/to_nms/perf (first priority is to delete old historical stats files.) /hss/to_nms/fault (second priority is to delete old alarm files.) /hss/to_nms/acct (third priority is to delete old accounting files, but only if the quota for accoutning is less than the default value of 100 percent.)" ::= { adnDumGroup 11 } adnDumSubdirectoryEntry OBJECT-TYPE SYNTAX AdnDumSubdirectoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Disk Utilization Management Subdirectory Table that defines one subdirectories under a Disk Utilization Management directory." INDEX { adnDumDirectoryIndex, adnDumSubdirectoryIndex } ::= { adnDumSubdirectoryTable 1 } AdnDumSubdirectoryEntry ::= SEQUENCE { adnDumDirectoryIndex INTEGER, adnDumSubdirectoryIndex INTEGER, adnDumSubdirectoryPathname DisplayString, adnDumSubdirectoryQuota AdnPercent } adnDumSubdirectoryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Index to a table of subdirectories under a directory on which a Disk Utilization Management's managed filesystem has been mounted. The value of the index is directly related to order in which the subdirectories are targeted for storage reduction. The first subdirectory in the table of subdirectories that Disk Utilization Management targets for storage reduction has index 1" ::= { adnDumSubdirectoryEntry 1 } adnDumSubdirectoryPathname OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The complete pathname to the subdirectory of a Disk Utilization Management directory. The complete pathname starts with and includes the root directory." ::= { adnDumSubdirectoryEntry 2 } adnDumSubdirectoryQuota OBJECT-TYPE SYNTAX AdnPercent ACCESS read-write STATUS mandatory DESCRIPTION "The percent of the aggregate disk storage that is allocated to the subdirectory of the filesystem on which the parent directory is mounted. The default quota for the /hss/to_nms/perf subdirectory is 10 percent, meaning that on a first pass of the reduction cycle, old statistics files will be deleted until the /hss/to_nms/perf subdirectory is using no more than 10 percent of the total partition size. The default quota for the /hss/to_nms/fault subdirectory is 10 percent. The default quota for the /hss/to_nms/acct subdirectory is 100 percent, meaning that no accounting files will be deleted by this process." DEFVAL { 100 } ::= { adnDumSubdirectoryEntry 3 } adnUpdateCntlMIB OBJECT IDENTIFIER ::= { adnProprietary 12 } adnUCNodeGroup OBJECT IDENTIFIER ::= { adnUpdateCntlMIB 1 } adnUpdateCntl OBJECT IDENTIFIER ::= { adnUpdateCntlMIB 2 } adnVerInfoGroup OBJECT IDENTIFIER ::= { adnUpdateCntlMIB 3 } adnUCNodeAdminCommand OBJECT-TYPE SYNTAX INTEGER { null(1), install(2), activate(3), commit(4), deactivate(5), withdraw(6), confirm-link(7), qInstallActivate(8), qDeactivateWithdraw(9), qConfirmChange(10), qRebaseline(11) } ACCESS read-write STATUS mandatory DESCRIPTION "The NMS sets a command value into this object,as follows: NULL No action to take place. install Places newly-transferred files in a read- only partition. activate HSS sends code/configuration to subsystems. commit HSS declares the activated code/ configuration to be in committed state. deactivate Changes the state of the HSS by reverting to the committed code and configuration. withdraw Deletes installed files. confirm-link Set by the NMS following receipt of successful Activate trap. qInstallActivate Places newly-transferred Quick configuration change files in a secured partition and sends configuration to subsytems. qDeactivateWithdraw Undoes Quick configuration changes and deletes installed files. qConfirmChange Confirms a Quick configuration change and sets it as an extension of the committed version. qRebaseline Install and commit a new set of configuration files to synchronize the NMS and HSS after several Quick transactions. Common Name: Administrative Command" ::= { adnUCNodeGroup 1 } adnUCNodeOperCommand OBJECT-TYPE SYNTAX INTEGER { other(1), install(2), activate(3), commit(4), deactivate(5), withdraw(6), none(7), qInstallActivate(8), qDeactivateWithdraw(9), qConfirmChange(10), qRebaseline(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the current or last command accepted and processed by the HSS. Common Name: Oper Command" ::= { adnUCNodeGroup 2 } adnUCNodeOperStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(1), success(2), failed(3), warning(4), rollback-in-progress(5), initial(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the results of the last command, or if it is still in progress. Common Name: Oper Command Status" ::= { adnUCNodeGroup 3 } adnUCNodeState OBJECT-TYPE SYNTAX INTEGER { committed(0), activateInProgress(1), uncommitted(2), activateInProgressSuspended(3), loadingCommittedSuspended(4), loadingCommitted(5), qConfirmed(6), qActivateInProgress(7), qUnconfirmed(8), qLoadingConfirmed(9), qRebaselineInProgress(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the `state' of code/ configuration update processing. The values are: committed -- The node is running the committed software version. activateInProgress -- An Activate command is in progress. uncommitted -- The node is running the uncommitted software version. activateInProgressSuspended -- An Activate command is in progress. The processing of the Activate is suspended while the Control Unit board waits for a confirmation that any coupler boards that have been reset have gone down, before Activate processing continues. loadingCommittedSuspended -- The node is in the process of loading the committed software version, due to a Deactivate command or an automatic rollback. The processing of the deactivation is suspended while the Control Unit board waits for a confirmation that any coupler boards that have been reset have gone down, before deactivation processing continues. loadingCommitted -- The node is in the process of loading the committed software version, due to a Deactivate command or an automatic rollback. qConfirmed -- The node is running a confirmed Quick configuration change on top of the committed version. qActivateInProgress -- A Quick Install&Activate command is in progress. qUnconfirmed -- The node is running the unconfirmed Quick configuration. qLoadingConfirmed -- The node is in the process of loading the confirmed Quick configuration, due to a Quick Deactivate&Withdraw command or an automatic rollback. qRebaselineInProgress -- A Quick Rebaseline command is in progress. Common name: Update Control Status" ::= { adnUCNodeGroup 4 } adnUCNodeErrorType OBJECT-TYPE SYNTAX INTEGER { no-err(0), config(1), software(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the type of error detected by the HSS configuration management. no-err -- There is no error config -- Error occurred in configuration file management software -- Error occurred in firmware or software management. Common Name: Update Error Type" ::= { adnUCNodeGroup 5 } adnUCNodeErrorStatus OBJECT-TYPE SYNTAX INTEGER { noError(0), tooBig(1), noSuchName(2), badValue(3), readOnly(4), genErr(5), noAccess(6), wrongType(7), wrongLength(8), wrongEncoding(9), wrongValue(10), noCreation(11), inconsistentValue(12), resourceUnavailable(13), commitFailed(14), undoFailed(15), authorizationError(16), notWritable(17), inconsistentName(18) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the exact error detected by the HSS configuration management. For configuration table errors, this is the SNMP error code defined in RFC 1448. For software or firmware management errors, the value is genErr(5). Common Name: Update Error Status" ::= { adnUCNodeGroup 6 } adnUCNodeErrorGroup OBJECT-TYPE SYNTAX INTEGER { noError(0), sfas(1), nmgs(2), routes(3), cme(4), frs(5), isna(6), isom(7), llce(8), franpCm(9), franpSi(10), franpSw(11), ldFlip(12), ldQuicc(13), ldSpyder(14), smSup(15), mainSup(16), atmSup(17), atmLine(18), aafd(19), mainPmd(20), asm(21), aom(22), inmpLib(23), vs(24), pathSelect(25), routesAgt(26), atmCes(27), cvsi(28), iprt(29) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the group in which this specific error code is defined. Typically, a group corresponds to one HSS software subsystem. Common Name: Update Error Group" ::= { adnUCNodeGroup 7 } adnUCNodeErrorCode OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies a specific error defined within a group. Its interpretation depends on the value of adnUCNodeErrorGroup. Common Name: Update Error Code" ::= { adnUCNodeGroup 8 } adnUCNodeExceptionCode OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies an exception condition, if an error was detected during configuration table processing (adnUCNodeErrorType = config). Values may be zero (no exception), 0x80 (no such object) or 0x81 (no such instance). Common Name: Update Exception Code" ::= { adnUCNodeGroup 9 } adnUCNodeErrorChassis OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the chassis for which the error occurred." ::= { adnUCNodeGroup 10 } adnUCNodeErrorSlot OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the slot for which the error occurred." ::= { adnUCNodeGroup 11 } adnUCNodeErrorProc OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the processor for which the error occurred, in the case of software or firmware management errors (adnUCNodeErrorType = software)." ::= { adnUCNodeGroup 12 } adnUCNodeErrorTableName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the MIB table name for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config)." ::= { adnUCNodeGroup 13 } adnUCNodeErrorIndex1 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the first index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer." ::= { adnUCNodeGroup 14 } adnUCNodeErrorIndex2 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the second index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer." ::= { adnUCNodeGroup 15 } adnUCNodeErrorIndex3 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the third index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer." ::= { adnUCNodeGroup 16 } adnUCNodeErrorIndex4 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the fourth index value of the table instance for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config). It is zero if it does not apply, or if it cannot be represented as an integer." ::= { adnUCNodeGroup 17 } adnUCNodeErrorNominator OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the nominator for which the error occurred, in the case of configuration table errors (adnUCNodeErrorType = config)." ::= { adnUCNodeGroup 18 } adnUCNodeUncommittedAvail OBJECT-TYPE SYNTAX INTEGER { other(0), available(1), unavailable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether there is an uncommitted version installed. The values are: available -- There is a uncommitted version installed. unavailable -- There is no uncommitted version installed. Common Name: Uncommitted Version" ::= { adnUCNodeGroup 19 } adnUCNodeDeliveryType OBJECT-TYPE SYNTAX INTEGER { singleModification(1), singleReplacement(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of delivery made by the NMS to the HSS. SingleReplacement means that the entire software version for the HSS is being delivered, and should replace unconditionally whatever is the current software version running at the HSS. SingleModification means that the delivery from the NMS may be full or partial, and that the HSS will detect which files have changed between the current HSS software version and the new delivery. For both singleReplacement and singleModification, there is just one single delivery tar file from the NMS, not multiple tar files." DEFVAL { singleModification } ::= { adnUCNodeGroup 20 } adnUCNodeDebugCommand OBJECT-TYPE SYNTAX INTEGER { noCommand(1), startTrace(2), saveTrace(3), stopTrace(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a network operator to enable the capture of configuration management trace information into an ASCII file, which may then be retrieved and analyzed off-line. Setting the value of this object to startTrace causes the HSS to begin saving the detailed trace of the Node Configuration Management Subsystem into the memory of the HSS Control Unit. Setting the value of this object to saveTrace causes the detailed trace of the Node Configuration Management Subsystem to be copied from HSS memory into a file stored on the HSS Control Unit disk, in /hss_pmd/.nmcm_detail_trace. The file is a snapshot of the current trace in memory. Its maximum size is 500,000 bytes. If a previous snapshot already existed in the directory /hss_pmd, then this old file is renamed to /hss_pmd/.old.nmcm_detail_trace. (A third trace file, .auto_nmcm_detail_trace, may also be present in the same directory. This contains a snapshot of the trace in memory that is saved to disk automatically in the event of an internally-detected error condition or version deactivation.) Setting the value of this object to stopTrace causes the HSS to stop saving the detailed trace into memory. NoCommand is the default value of this object, and has no effect on the node." DEFVAL { noCommand } ::= { adnUCNodeGroup 21 } adnUCNodeCodeFlashFlag OBJECT-TYPE SYNTAX INTEGER { disableFlash(1), offLineFlashOnly(2), enableFlash(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a network operator to enable or disable the code downloading from coupler flash. The values are: disableFlash - code will be neither programmed in flash (either on-line or off-line) nor loaded from flash. offLineFlashOnly - only off-line flash update is allowed. Code can be loaded from flash. enableFlash - code can be programmed in flash (either on-line or off-line) and loaded from flash." DEFVAL { enableFlash } ::= { adnUCNodeGroup 22 } adnUCNodeConfigFlashFlag OBJECT-TYPE SYNTAX INTEGER { disableFlash(1), offLineFlashOnly(2), enableFlash(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by a network operator to enable or disable the configuration downloading from coupler flash. The values are: disableFlash - the configuration will be neither programmed in flash (either on-line or off-line) nor loaded from flash. offLineFlashOnly - only off-line flash update is allowed. The configuration can be loaded from flash. enableFlash - the configuration can be programmed in flash (either on-line or off-line) and loaded from flash." DEFVAL { enableFlash } ::= { adnUCNodeGroup 23 } adnCuCodeUpdateCntlTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCuCodeUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Control Unit Update Control table contains objects for Control Unit code operational status between the HSS and the NMS." ::= { adnUpdateCntl 2 } adnCuCodeUpdateCntlEntry OBJECT-TYPE SYNTAX AdnCuCodeUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Control Unit code portion of the Update Control table." INDEX { adnCuCodeServiceIdIndex } ::= { adnCuCodeUpdateCntlTable 1 } AdnCuCodeUpdateCntlEntry ::= SEQUENCE { adnCuCodeServiceIdIndex INTEGER (-2147483648..2147483647), adnCuCodeOperStatus INTEGER, adnCuCodeState INTEGER } adnCuCodeServiceIdIndex OBJECT-TYPE SYNTAX INTEGER { other(1), core-complement(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field. The value of a Control Unit service." ::= { adnCuCodeUpdateCntlEntry 1 } adnCuCodeOperStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(1), success(2), failed(3), pending(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the results of the last command, or whether it is still in progress." ::= { adnCuCodeUpdateCntlEntry 2 } adnCuCodeState OBJECT-TYPE SYNTAX INTEGER { committed(1), uncommitted(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the `state' of Control Unit code update processing." ::= { adnCuCodeUpdateCntlEntry 3 } adnCuConfigUpdateCntlTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCuConfigUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Configuration Update Control table contains objects for Control Unit Configuration operational status between the HSS and the NMS." ::= { adnUpdateCntl 3 } adnCuConfigUpdateCntlEntry OBJECT-TYPE SYNTAX AdnCuConfigUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Control Unit Configuration Update Control table." INDEX { adnCuConfigApplIdIndex } ::= { adnCuConfigUpdateCntlTable 1 } AdnCuConfigUpdateCntlEntry ::= SEQUENCE { adnCuConfigApplIdIndex INTEGER, adnCuConfigOperStatus INTEGER, adnCuConfigState INTEGER, adnCuConfigFileName OCTET STRING, adnCuConfigNextFileName OCTET STRING } adnCuConfigApplIdIndex OBJECT-TYPE SYNTAX INTEGER { sfas-id(1), nmgs-id(2), msup-id(3), iss-id(4), pmd-id(5), routes-id(6), mibmgt-id(7), iprt-id(8) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field - Control Unit application IDs (e.g. NMGS, SFAS, Main Supervisor, ....)" ::= { adnCuConfigUpdateCntlEntry 1 } adnCuConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(1), success(2), failed(3), pending(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the results of the last command, or whether it is still in progress." ::= { adnCuConfigUpdateCntlEntry 2 } adnCuConfigState OBJECT-TYPE SYNTAX INTEGER { committed(0), actInProgWaitingForLoadInd(1), actInProgMiddleTransaction(2), actInProgEndTransaction(3), uncommitted(4), loadingCommittedNextFile(5), loadingCommittedMiddleTrans(6), loadingCommittedEndTrans(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the `state' of Control Unit configuration update processing. The values mean: committed -- This CU application is not currently loading configuration tables. Its configuration tables are from the committed version. actInProgWaitingForLoadInd -- An Activate command is in progress, and for this CU application, the state machine is waiting for an indication that a request has been received to start loading the tables. actInProgMiddleTransaction -- An Activate command is in progress, and for this CU application, the state machine is waiting for the response to a middle message within a configuration transaction. actInProgEndTransaction -- An Activate command is in progress, and for this CU application, the state machine is waiting for the response to a null message that signals the end of a a configuration transaction. uncommitted -- This CU application is using uncommitted configuration tables. loadingCommittedNextFile -- This CU application is the the process of loading uncommitted configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction, and will then send the next configuration file, which will be the rollback file. loadingCommittedMiddleTrans -- This CU application is the the process of loading committed configuration tables. The state machine is waiting for a response to a middle message within the configuration transaction. loadingCommittedEndTrans -- This CU application is the the process of loading committed configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction." ::= { adnCuConfigUpdateCntlEntry 3 } adnCuConfigFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the configuration file to be used for this Control Unit subsystem." ::= { adnCuConfigUpdateCntlEntry 4 } adnCuConfigNextFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the next configuration file to be used for this Control Unit subsystem, if there is an automatic rollback in progress from uncommitted configuration to committed configuration. The value of this object is not significant if there is currently no rollback in progress." ::= { adnCuConfigUpdateCntlEntry 5 } adnProcCodeUpdateCntlTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnProcCodeUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Update Control table contains objects for processor code operational status between the HSS and the NMS." ::= { adnUpdateCntl 4 } adnProcCodeUpdateCntlEntry OBJECT-TYPE SYNTAX AdnProcCodeUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the processor code portion of the Update Control table." INDEX { adnProcCodeChassisIndex, adnProcCodeSlotIndex, adnProcCodeProcessorIndex } ::= { adnProcCodeUpdateCntlTable 1 } AdnProcCodeUpdateCntlEntry ::= SEQUENCE { adnProcCodeChassisIndex INTEGER (-2147483648..2147483647), adnProcCodeSlotIndex INTEGER (-2147483648..2147483647), adnProcCodeProcessorIndex INTEGER (-2147483648..2147483647), adnProcCodeOperStatus INTEGER, adnProcCodeState INTEGER } adnProcCodeChassisIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane." ::= { adnProcCodeUpdateCntlEntry 1 } adnProcCodeSlotIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used." ::= { adnProcCodeUpdateCntlEntry 2 } adnProcCodeProcessorIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the processor on a coupler board. Processors on a coupler are numbered 0-3. The number of processors varies depending on the type of coupler." ::= { adnProcCodeUpdateCntlEntry 3 } adnProcCodeOperStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(1), success(2), failed(3), pending(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the results of the last command, or whether it is still in progress." ::= { adnProcCodeUpdateCntlEntry 4 } adnProcCodeState OBJECT-TYPE SYNTAX INTEGER { committed(0), actInProgWaitForDownMsg(1), actInProgWaitForReloadReq(2), actInProgWaitForSwCompleteMsg(3), uncommitted(4), loadCommittedWaitForDownMsg(5), loadCommittedWaitForCompleteMsg(6), pending(7), actInProgWaitForFwareCompleteMsg(8), actInProgWaitForFlashCompleteMsg(9), actInProgWaitForLoadRequest(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the `state' of processor code update processing. The values are: committed -- This processor is not in the process of loading, and the software for this processor is the committed version. actInProgWaitForDownMsg -- An Activate command is in progress, this processor has been reset, and the state machine is waiting for a message confirming that the processor is now down. actInProgWaitForReloadReq -- An Activate command is in progress, this processor has already loaded at least once and then started to reload. The state machine is waiting for another load request. actInProgWaitForSwCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the software portion of the load has completed. uncommitted -- This processor is not in the process of loading. It is currently running uncommitted software. loadCommittedWaitForDownMsg -- This processor is in the process of loading committed software. The processor has been reset, and the state machine is waiting for a message confirming that the processor is down. loadCommittedWaitForCompleteMsg -- This processor is in the process of loading committed software. The state machine is waiting for a message to indicate that the load has completed. pending -- An Activate command is in progress, and this processor is currently down. When the processor comes up, it will be loaded with the uncommitted software version. actInProgWaitForFwareCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the firmware portion of the load has completed. actInProgWaitForFlashCompleteMsg -- An Activate command is in progress, and the state machine is waiting for a message to indicate that the update of code into flash memory has completed. actInProgWaitForLoadRequest -- An Activate command is in progress, and this processor has been reset. The state machine is waiting for a request to start the loading process." ::= { adnProcCodeUpdateCntlEntry 5 } adnBrdConfigUpdateCntlTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnBrdConfigUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The board configuration portion of the Update Control table contains objects for board configuration operational status between the HSS and the NMS." ::= { adnUpdateCntl 5 } adnBrdConfigUpdateCntlEntry OBJECT-TYPE SYNTAX AdnBrdConfigUpdateCntlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board configuration portion of the Update Control table." INDEX { adnBrdConfigChassisIndex, adnBrdConfigSlotIndex } ::= { adnBrdConfigUpdateCntlTable 1 } AdnBrdConfigUpdateCntlEntry ::= SEQUENCE { adnBrdConfigChassisIndex INTEGER (-2147483648..2147483647), adnBrdConfigSlotIndex INTEGER (-2147483648..2147483647), adnBrdConfigOperStatus INTEGER, adnBrdConfigState INTEGER, adnBrdConfigFileName OCTET STRING, adnBrdConfigNextFileName OCTET STRING, adnBrdConfigNoCfgOrFullCfg INTEGER } adnBrdConfigChassisIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane." ::= { adnBrdConfigUpdateCntlEntry 1 } adnBrdConfigSlotIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used." ::= { adnBrdConfigUpdateCntlEntry 2 } adnBrdConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { in-progress(1), success(2), failed(3), pending(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the results of the last command, or whether it is still in progress." ::= { adnBrdConfigUpdateCntlEntry 3 } adnBrdConfigState OBJECT-TYPE SYNTAX INTEGER { committed(0), actInProgWaitingForLoadInd(1), actInProgMiddleTransaction(2), actInProgEndTransaction(3), uncommitted(4), loadingCommittedNextFile(5), loadingCommittedMiddleTrans(6), loadingCommittedEndTrans(7), pending(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object notifies the NMS of the `state' of configuration update processing. The values mean: committed -- This board is not currently loading configuration tables. Its configuration tables are from the committed version. actInProgWaitingForLoadInd -- An Activate command is in progress. For this board, the state machine is waiting for an indication that all requests to load tables have been received, so that the loading can begin. actInProgMiddleTransaction -- An Activate command is in progress, and for this board, the state machine is waiting for the response to a middle message within a configuration transaction. actInProgEndTransaction -- An Activate command is in progress, and for this board, the state machine is waiting for the response to a null message that signals the end of a configuration transaction. uncommitted -- This board is using uncommitted configuration tables. loadingCommittedNextFile -- This board is in the process of loading uncommitted configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction, and will then send the next configuration file, which will be the rollback file. loadingCommittedMiddleTrans -- This board is in the process of loading committed configuration tables. The state machine is waiting for a response to a middle message within the configuration transaction. loadingCommittedEndTrans -- This board is in the process of loading committed configuration tables. The state machine is waiting for a response to a null message that signals the end of a transaction. pending -- An Activate command is in progress, and this board is currently down. When the board comes up, it will be loaded with the uncommitted configuration file." ::= { adnBrdConfigUpdateCntlEntry 4 } adnBrdConfigFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the configuration file being used for this board." ::= { adnBrdConfigUpdateCntlEntry 5 } adnBrdConfigNextFileName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the next configuration file to be used for this board, if there is an automatic rollback in progress from uncommitted configuration to committed configuration. The value of this object is not significant if there is currently no rollback in progress." ::= { adnBrdConfigUpdateCntlEntry 6 } adnBrdConfigNoCfgOrFullCfg OBJECT-TYPE SYNTAX INTEGER { noConfig(1), fullConfig(2), deletedConfig(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies whether a Parameteric File Xfer Interface (PFXI) configuration file exists for this chassis and slot. The values mean: noConfig -- no configuration file fullConfig -- full configuration file deletedConfig -- the board has been deleted. For some board types (such as High Speed Couplers), the configuration parameters are managed entirely by the Control Unit, not by the software running on the board itself. In these cases there will be no configuration file. When a coupler board has been deleted from the uncommitted version, but still exists in the committed version, the value of this object is set to deletedConfig." ::= { adnBrdConfigUpdateCntlEntry 7 } adnBrdFlashContentListTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnBrdFlashContentListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The board flash content list is a portion of the Update Control group which contains information about the contents of a board's flash memory." ::= { adnUpdateCntl 6 } adnBrdFlashContentListEntry OBJECT-TYPE SYNTAX AdnBrdFlashContentListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board flash content portion of the Update Control table." INDEX { adnBrdFlashChassisIndex, adnBrdFlashSlotIndex } ::= { adnBrdFlashContentListTable 1 } AdnBrdFlashContentListEntry ::= SEQUENCE { adnBrdFlashChassisIndex INTEGER (-2147483648..2147483647), adnBrdFlashSlotIndex INTEGER (-2147483648..2147483647), adnBrdFlashSize INTEGER (-2147483648..2147483647), adnBrdFlashVolume1 DisplayString, adnBrdFlashVolume2 DisplayString, adnBrdFlashVolume3 DisplayString, adnBrdFlashVolume4 DisplayString } adnBrdFlashChassisIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the chassis. Chassis are numbered 1-7. The main chassis (i.e., the one with the active Control Unit) in a multi-chassis node is chassis number 1. In a single-chassis node, the chassis number is 1. This number is provided in hardware by a HLCID card which is plugged into the midplane." ::= { adnBrdFlashContentListEntry 1 } adnBrdFlashSlotIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index field that identifies the slot. Slots within a chassis are numbered 1-12. The first slot on the left when facing the front of the chassis is number 1. This number is provided in hardware through hard-wiring on the midplane. Note that the HBSAC board always has a special slot identifier of 30, but this slot number is never used." ::= { adnBrdFlashContentListEntry 2 } adnBrdFlashSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS megabytes ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the coupler board flash size in megabytes." ::= { adnBrdFlashContentListEntry 3 } adnBrdFlashVolume1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the flash image file name loaded in the first volume of coupler flash." ::= { adnBrdFlashContentListEntry 4 } adnBrdFlashVolume2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the flash image file name loaded in the second volume of coupler flash." ::= { adnBrdFlashContentListEntry 5 } adnBrdFlashVolume3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the flash image file name loaded in the third volume of coupler flash." ::= { adnBrdFlashContentListEntry 6 } adnBrdFlashVolume4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the flash image file name loaded in the fourth volume of coupler flash." ::= { adnBrdFlashContentListEntry 7 } adnVerInfoNodeGroup OBJECT IDENTIFIER ::= { adnVerInfoGroup 1 } adnNodeRunningVersion OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the pathname of the node-level version descriptor file for the HSS software version that is currently running. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99)." ::= { adnVerInfoNodeGroup 1 } adnNodeCommittedVersion OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the pathname of the node-level version descriptor file for the committed (validated) HSS software version. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99)." ::= { adnVerInfoNodeGroup 2 } adnNodeUncommittedVersion OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the pathname of the node-level version descriptor file for the uncommitted (non-validated) HSS software version. The format of the filename is vd.., where is the HSS software version number and is the value modulo 100 of the NMS configuration number, which is incremented at the NMS whenever a new HSS software and/or configuration package is built. is the product release number (1 digit, 0-9), is the functional version (1 digit, 0-9), is the sub-function version within the release (2 digits, 00-99), is the fix version number, (2 digits, 01-99), and is a number that the Network Management System assigns to insure uniqueness of the version number, (2 digits, 00-99). If there is no uncommitted software version, then a null string is returned." ::= { adnVerInfoNodeGroup 3 } adnNodeNMSCommitNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is the NMS configuration number of the HSS version (software and configuration package) which is committed at the HSS. It is set by the NMS as part of the commit procedure." DEFVAL { 0 } ::= { adnVerInfoNodeGroup 4 } adnNodeNMSBuildNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is the NMS configuration number of the HSS version (software and configuration package) which is transferred to and activated at the HSS. It is set by the NMS right after the install procedure." DEFVAL { 0 } ::= { adnVerInfoNodeGroup 5 } adnNodeNMSQbuildNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is the NMS configuration number of the HSS configuration version built using the Quick interface which is transferred to and activated at the HSS. It is incremented by the NMS after each qConfirm command, and reset after each qRebaseline command." DEFVAL { 0 } ::= { adnVerInfoNodeGroup 6 } adn3rdPartyMIB OBJECT IDENTIFIER ::= { adnProprietary 13 } adn3rdPartyCardTable OBJECT-TYPE SYNTAX SEQUENCE OF Adn3rdPartyCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of third party card entries and attributes needed by network management. This is an extension to the adnEquipTable for third party card entries." ::= { adn3rdPartyMIB 1 } adn3rdPartyCardEntry OBJECT-TYPE SYNTAX Adn3rdPartyCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A card entry containing objects that represent the access address and parameters that can be displayed in the NMS." INDEX { adnEquipIndex } ::= { adn3rdPartyCardTable 1 } Adn3rdPartyCardEntry ::= SEQUENCE { adn3rdPartyCardDescr DisplayString, adn3rdPartyCardLocAddrType INTEGER, adn3rdPartyCardLocAddress PhysAddress } adn3rdPartyCardDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A textual string describing the card. Common Name: Description" ::= { adn3rdPartyCardEntry 1 } adn3rdPartyCardLocAddrType OBJECT-TYPE SYNTAX INTEGER { other(1), ip(2), e164(3), x121(4), private(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Card's address type. Common Name: Address Type" ::= { adn3rdPartyCardEntry 2 } adn3rdPartyCardLocAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "Address of card. Common Name: Address" ::= { adn3rdPartyCardEntry 3 } adnClock OBJECT IDENTIFIER ::= { adnProprietary 14 } adnClockConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnClockConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The system clock configuration table." ::= { adnClock 1 } adnClockConfigEntry OBJECT-TYPE SYNTAX AdnClockConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the system clock configuration table." INDEX { adnClockIfIndex } ::= { adnClockConfigTable 1 } AdnClockConfigEntry ::= SEQUENCE { adnClockIfIndex INTEGER, adnClockType INTEGER, adnClockStatus INTEGER, adnClockSource INTEGER } adnClockIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the ifIndex and it uniquely identifies a DS1/E1 line." ::= { adnClockConfigEntry 1 } adnClockType OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the type of DS1/E1 line." ::= { adnClockConfigEntry 2 } adnClockStatus OBJECT-TYPE SYNTAX INTEGER { good(1), failed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The system clock status can be determined by looking at this object for both the primary and backup lines. If the status is failed for both lines, it implies that the system timing is provided by a local clock. If the status is failed in the primary line and good in the backup line, it implies that the system timing is provided by the backup line. If the status is good in the primary line, it implies that the system timing is provided by the primary line." ::= { adnClockConfigEntry 3 } adnClockSource OBJECT-TYPE SYNTAX INTEGER { line(1), internal(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The system clock source is typically derived from the line(1). In a network with no other suitable clock source, one HSS can be designated as the clock source for the entire network. That HSS would be configured as internal(2) for its primary and backup. All other HSS in the network would still use the value line(1)." DEFVAL { line } ::= { adnClockConfigEntry 4 } adnUCNodeErrorsMsup OBJECT IDENTIFIER ::= { adnUCNodeErrors 16 } adnUCNodeErrorsMsupInconsTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 1 } adnUCNodeErrorsMsupInconsIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 2 } adnUCNodeErrorsMsupMissingObject OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 3 } adnUCNodeErrorsMsupBoardCrash OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 4 } adnUCNodeErrorsMsupCu1NotConf OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 6 } adnUCNodeErrorsMsupCu2NotConf OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 7 } adnUCNodeErrorsMsupCuInWrongSlot OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 8 } adnUCNodeErrorsMsupNotCuSlot OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 9 } adnUCNodeErrorsMsupSoftwareError OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 10 } adnUCNodeErrorsMsupCuNotSuspend OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 11 } adnUCNodeErrorsMsupActionAlreadyProgress OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 12 } adnUCNodeErrorsMsupVersionChangeProgress OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 13 } adnUCNodeErrorsMsupInconsCuTypes OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 14 } adnUCNodeErrorsMsupWrongCu1Type OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 15 } adnUCNodeErrorsMsupWrongCu2Type OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 16 } adnUCNodeErrorsMsupWrongCu1ApplType OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 17 } adnUCNodeErrorsMsupWrongCu2ApplType OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 18 } adnUCNodeErrorsMsupWrongSyncConf OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 19 } adnUCNodeErrorsMsupCuForbidSwitch OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 20 } adnUCNodeErrorsMsupInconsState OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 141 } adnUCNodeErrorsMsupCUModif OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 142 } adnUCNodeErrorsMsupWrongAppl OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 143 } adnUCNodeErrorsMsupWrongRedunRole OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 145 } adnUCNodeErrorsMsupWrongRedunOptions OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 146 } adnUCNodeErrorsMsupWrongServInd OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 151 } adnUCNodeErrorsMsupWrongAseConf OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 152 } adnUCNodeErrorsMsupProcCreation OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 155 } adnUCNodeErrorsMsupISLBlock OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 156 } adnUCNodeErrorsMsupISLUnblock OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 157 } adnUCNodeErrorsMsupISLReset OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 158 } adnUCNodeErrorsMsupSLLReq OBJECT IDENTIFIER ::= { adnUCNodeErrorsMsup 159 } adnNodeSupervisionMIB OBJECT IDENTIFIER ::= { adnProprietary 15 } AdnAppliqueType ::= INTEGER { other(1), ha8rs(2), ha8x1(3), ha8v3(4), ha8v6(5), ha2t1(6), ha2e1(7), hacig(8), hat3b(9), hae3b(10), has1b(11), hacmi(12), hae1b(13), hat1b(14), hacui1(15), hacui2(16), haase1(17), haase2(18), ha2et(19), ha2tr(20), hammb(21), hacige(22), ha8ct(23), ha8ce(24), havft(25), havfe(26), hard1(27), hasyn(28), hacui3(29), ha2e1b(30), hae1bb(31), ha8ceb(32), havfeb(33), ha4vt(34), ha4ve(35), has1b3(36), has4b(37), has4b3(38), hats1c(39), hatt3c(40), hate3c(41), hacmic(42), hatmfc(43), hatl1c(44) } adnChassisTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnChassisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the chassis table." ::= { adnNodeSupervisionMIB 1 } adnChassisEntry OBJECT-TYPE SYNTAX AdnChassisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the chassis table. There is one entry for each chassis. The index corresponds to equipment type 'chassis' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnChassisTable 1 } AdnChassisEntry ::= SEQUENCE { adnChassisStatus INTEGER, adnChassisOperFanId INTEGER, adnChassisPresentFanId INTEGER, adnChassisOperPowerId INTEGER, adnChassisPresentPowerId INTEGER, adnChassisSlotNumber INTEGER, adnChassisPrimaryMSC8kSourceIfIndex INTEGER, adnChassisBackupMSC8kSourceIfIndex INTEGER, adnChassisMidplaneClockStatus INTEGER, adnChassisClockPropagationStatus INTEGER, adnChassisRABUsage INTEGER, adnChassisStandbyCUBusStatus INTEGER } adnChassisStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the chassis status. It is a bit map represented as a sum; therefore, it can represent multiple failures. The bit positions are: 1 : power supply failure 4 : fan failure 8 : temperature warning 16 : SAC card (Status and Alarm Control) failure 32 : ISL (Internal Serial Link) bus failure detected on the active CU 64 : IOS (Input Output Service) bus failure detected on the active CU 128 : IOS (Input Output Service) bus silence detected on the active CU 256 : ISL (Internal Serial Link) bus state unknown on the active CU 512 : IOS (Input Output Service) bus state unknown on the active CU N.B.: This variable is significant when the operational state of the chassis is disabled. When there is no chassis error, this variable has the value 0." ::= { adnChassisEntry 1 } adnChassisOperFanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the fan trays which are operational. It is a bit map represented as a sum; therefore, it can represent multiple fan trays in the operational state. Each bit position represents a fan tray. If the bit is set, the fan tray is operational. If the bit is not set, the fan tray is not operational. The bit positions are: 1 : Fan tray number 1 is operational 2 : Fan tray number 2 is operational Note: This information is not significant if the fan tray is not present in the chassis." ::= { adnChassisEntry 2 } adnChassisPresentFanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the fan trays which are present in the chassis. It is a bit map represented as a sum; therefore it can represent multiple fan trays in the chassis. Each bit position represents a fan tray. If the bit is set, the fan tray is present. If the bit is not set, the fan tray is absent. The bit positions are: 1 : Fan tray number 1 is present 2 : Fan tray number 2 is present." ::= { adnChassisEntry 3 } adnChassisOperPowerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the power supplies which are operational. It is a bit map represented as a sum; therefore, it can represent multiple power supplies in the operational state. Each bit position represents a power supply. If the bit is set, the power supply is operational. If the bit is not set, the power supply is not operational. The bit positions are: 1 : Power supply number 1 is operational 2 : Power supply number 2 is operational 4 : Power supply number 3 is operational 8 : Power supply number 4 is operational 16 : Power supply number 5 is operational 32 : Power supply number 6 is operational. Note: This information is not significant if the power supply is not present in the chassis." ::= { adnChassisEntry 4 } adnChassisPresentPowerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the power supplies which are present in the chassis. It is a bit map represented as a sum; therefore, it can represent multiple power supplies in the chassis. Each bit position represents a power supply. If the bit is set, the power supply is present. If the bit is not set, the power supply is absent. The various bit positions are: 1 : Power supply number 1 is present 2 : Power supply number 2 is present 4 : Power supply number 3 is present 8 : Power supply number 4 is present 16 : Power supply number 5 is present 32 : Power supply number 6 is present." ::= { adnChassisEntry 5 } adnChassisSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the number of slots in the chassis." ::= { adnChassisEntry 6 } adnChassisPrimaryMSC8kSourceIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the master line timing source . In spite of the name, which is like this for historical reasons, the line timing source can be MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed Coupler) or SDH HSC line timing source. The value of this object corresponds to the ifIndex of the line which provides the source. The value 0 is used when there is no master line timing source located on the chassis." ::= { adnChassisEntry 7 } adnChassisBackupMSC8kSourceIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies the backup line timing source . In spite of the name, which is like this for historical reasons, the line timing source can be MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed Coupler) or SDH HSC line timing source. The value of this object corresponds to the ifIndex of the line which provides the source. The value 0 is used when there is no backup line timing source located on the chassis." ::= { adnChassisEntry 8 } adnChassisMidplaneClockStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the status of the reference clocks on the chassis midplane. It is a bit map and a set bit indicates clock presence. The bit positions refer to the following clock references: 1 - primary 8 kHz MSC (Medium Speed Coupler) - (H80B) 2 - backup 8 kHz MSC - (H81B) 4 - primary SDH (Synchronous Digital Hierarchy) 8 - backup SDH 16 - primary PDH (Plesiochronous Digital Hierarchy) 32 - backup PDH In a multi-chassis system, a value of 0 indicates that all clock references are down. In a single-chassis system, the value of this object is 0." ::= { adnChassisEntry 9 } adnChassisClockPropagationStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the status of the clock propagated from this chassis to the next. It is a bit map and a set bit indicates that the clock is present. 1 - primary 8 kHz MSC (Medium Speed Coupler) 2 - backup 8 kHz MSC 4 - primary line timing (LT0) 8 - backup line timing (LT1) 16 - primary SDH (Synchronous Digital Hierarchy) 32 - backup SDH 64 - primary PDH (Plesiochronous Digital Hierarchy) 128 - backup PDH A value of 0 indicates that no clocks are being propagated. Note that the value of this object is 0 for a single-chassis system." ::= { adnChassisEntry 10 } adnChassisRABUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the slot number of the primary card which uses the RAB ( Redundancy Applique Bus). The value zero indicates that the RAB is not used." ::= { adnChassisEntry 11 } adnChassisStandbyCUBusStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the failures of the busses connected between the chassis and the standby CU ( Control Unit) card. It is a bit map represented as a sum; therefore it can represent multiple failures. The value zero indicates that there is no failure. The bit positions are : 32 : ISL (Internal Serial Link) bus failure detected on the standby CU 64 : IOS (Input Output Service) bus failure detected on the standby CU 128 : IOS (Input Output Service) bus silence detected on the standby CU 256 : ISL (Internal Serial Link) bus state unknown on the standby CU 512 : IOS (Input Output Service) bus state unknown on the standby CU." ::= { adnChassisEntry 12 } adnBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the board table." ::= { adnNodeSupervisionMIB 2 } adnBoardEntry OBJECT-TYPE SYNTAX AdnBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board table. There is one entry for each board configured. The index corresponds to equipment type 'card' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnBoardTable 1 } AdnBoardEntry ::= SEQUENCE { adnBoardAppliqueType AdnAppliqueType, adnBoardAppliqueState INTEGER, adnBoardApplPluggedType AdnAppliqueType, adnBoardPluggedType AutonomousType, adnBoardRedundancyRole INTEGER, adnBoardRedundancyStatus INTEGER, adnBoardRedundancyFailure INTEGER, adnBoardRedundantBind INTEGER, adnBoardSwitchCause INTEGER, adnBoardFaultStatus INTEGER, adnBoardServiceIndicator INTEGER, adnBoardTestResult INTEGER } adnBoardAppliqueType OBJECT-TYPE SYNTAX AdnAppliqueType ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the configured applique type." ::= { adnBoardEntry 3 } adnBoardAppliqueState OBJECT-TYPE SYNTAX INTEGER { present(1), absent(2), wrong(3), inaccessible(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the operational state of an applique which is either present or absent or wrong or inaccessible. The value inaccessible is used when the board is absent and its applique can not be detected." ::= { adnBoardEntry 4 } adnBoardApplPluggedType OBJECT-TYPE SYNTAX AdnAppliqueType ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the type of applique that is plugged in." ::= { adnBoardEntry 5 } adnBoardPluggedType OBJECT-TYPE SYNTAX AutonomousType ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the type of board that is plugged in. If no board is plugged in, this MIB object value should is set to the OBJECT IDENTIFIER { 0 0 }." ::= { adnBoardEntry 6 } adnBoardRedundancyRole OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), noRedundancy(1), primary(2), spare(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the redundancy role of the card. A value of noRedundancy(1) is used for cards that do not support redundancy. Cards that support redundancy, but do not have a spare configured have a value of primary(2). For the CU (Control Unit) board, this object is not significant and its value is always zero. value state ----- ------------------ 0 not significant ( for CU board). 1 this card does not support redundancy. 2 primary : this card can be backed up by another board in case of failure. 3 spare : the card can back up another card in case of failure." ::= { adnBoardEntry 7 } adnBoardRedundancyStatus OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), runningAsPrimary(1), idleSpare(2), runningAsBackup(3), switchoverInProgress(4), switchbackInProgress(5), runningOnBackup(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the redundancy status of the card. A card that does not support redundancy is considered a primary running for itself. For the CU (Control Unit) board, this object is not significant and its value is always zero. value status ----- ------------------ 0 not significant ( for CU board). 1 this card is a primary running for itself. 2 this card is an idle spare. 3 this card is a spare card running in place of a primary card. 4 a switchover to spare is in progress. 5 a switchback to primary is in progress. 6 the card is a primary card that is not running; a spare is running in its place." ::= { adnBoardEntry 8 } adnBoardRedundancyFailure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is a bitmap that qualifies the switchover or the switchback failures. When the value of this object is 0, none of the failures is present. For the CU (Control Unit) board, this object is not significant and its value is always zero. bit position failure ------------ ------------------ 0 no failure 1 the primary card is not available for the switchback 2 no spare card is available for the switchover 4 RAB (Redundancy Applique Bus) busy : see adnChassisRABUsage in adnChassisTable 8 the applique switchover from the primary card to the spare card has failed " ::= { adnBoardEntry 9 } adnBoardRedundantBind OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "For a primary card, this variable indicates the adnEquipIndex of the spare card which backs up this primary card. For a spare card, this variable indicates the adnEquipIndex of the primary card which is backed up by this spare card. The value zero indicates no relationship. For the CU (Control Unit) board, this object is not significant and its value is always zero." ::= { adnBoardEntry 10 } adnBoardSwitchCause OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), noSwitch(1), manualSwitchover(2), automaticSwitchover(3), manualSwitchback(4), semiautomaticSwitchback(5), automaticSwitchback(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object gives the reason why the switchover or the switchback has been initiated. This object qualifies the object adnBoardRedundancyFailure. For the CU (Control Unit) board, this object is not significant and its value is always zero. value cause ----- ------------------ 0 not significant ( for CU board) 1 neither switchover nor switchback occurred 2 manual switchover 3 automatic switchover 4 manual switchback 5 semiautomatic switchback 6 automatic switchback " ::= { adnBoardEntry 11 } adnBoardFaultStatus OBJECT-TYPE SYNTAX INTEGER { lsnHardwareProblem(1), desynchronizedPartition(2), noContact(3), hardwareError(4), initializationError(5), rebuildFailure(6), rebuildRequired(7), versionError(8), primaryExtSourceRecovery(601), primaryExtSourceLoss(602), primaryExtSourceQualifFail(603), primaryExtSourceAIS(604), primaryExtSourceLOF(605), primaryExtSourceEE(606), primaryExtSourceMSG(607), secondaryExtSourceRecovery(701), secondaryExtSourceLoss(702), secondaryExtSourceQualifFail(703), primaryLineSourceRecovery(801), primaryLineSourceLoss(802), primaryLineSourceQualifFail(803), secondaryLineSourceRecovery(901), secondaryLineSourceLoss(902), secondaryLineSourceQualifFail(903), partnerBbsynSignalRecovery(1001), partnerBbsynSignalLoss(1002), partnerBbsynSignalQualifFail(1003), pdhOutputEnable(1101), pdhOutputDisable(1102), sdhOutputEnable(1201), sdhOutputDisable(1202), mscOutputEnable(1301), mscOutputDisable(1302) } ACCESS read-only STATUS mandatory DESCRIPTION "For values 1 to 8 : this variable gives details on transitory failures of a CU (Control Unit) card. Other values : this variable gives details on failures on signals from or to a BBSYN card. For the other cards, this variable is not significant; see adnEquipTrapCause to know the reason of the last failure. The value zero indicates that there is no such type of failure. value failure ----- ------------------ 1 : Hardware problem on one LSN link (Local Sub-Network). 2 : At least one partition on this card is desynchronized. 3 : No contact is possible with this card. 4 : Hardware error. 5 : An error occurred during the initialization. 6 : The rebuild has failed. 7 : The rebuild of the card has to be done by the HSS supervision. 8 : Unknown software or firmware version 601 : primary external source recovery 602 : primary external source loss of signal 603 : primary external source qualification failure 604 : primary external source Alarm Indication Signal 605 : primary external source Loss Of Frame 606 : primary external source Excessive Error Indication 607 : primary external source Message failure indication 701 : secondary external source recovery 702 : secondary external source loss of signal 703 : secondary external source qualification failure 801 : primary line timing source recovery 802 : primary line timing source loss of signal 803 : primary line timing source qualification failure 901 : secondary line timing source recovery 902 : secondary line timing source loss of signal 903 : secondary line timing source qualification failure 1001 : partner BBSYN signal recovery 1002 : partner BBSYN loss of signal 1003 : partner BBSYN signal qualification failure 1101 : PDH output enable 1102 : PDH output disable 1201 : SDH output enable 1202 : SDH output disable 1301 : MSC output enable 1302 : MSC output disable." ::= { adnBoardEntry 12 } adnBoardServiceIndicator OBJECT-TYPE SYNTAX INTEGER { notSpecified(1), nodeAdmin(2), atmSwitching(3), frAccessAndTrunk(4), frxAccess(5), frTrunkOverAtm(6), frxTrunkOverAtm(7), atmAccessAndTrunk(8), frAccessOverAtm(9), frAccessAndTrunkOverAtm(10), circuitEmulation(11), nodeSync(12), ipForwarding(13) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the services supported by this board. Boards of the same physical type may have different values for this object, depending on the services configured for the board by the NMS operator. The selection of services may also cause different software to be loaded onto the board. For the same physical board type, the software load list (SLL) may contain multiple entries, each qualified using a different value of this object as a selector. Value Meaning ------------------------------------------------------------ notSpecified(1) No specific indication is available. - This value is used for boards with - no service assignment (such as a - board in the 'spare' redundancy - role). - nodeAdmin(2) Node administration and management - services. - atmSwitching(3) ATM switching services. - frAccessAndTrunk(4) Frame relay access and trunk - services. - frxAccess(5) PSX FRX (Frame Relay eXchange) - access service. - frTrunkOverAtm(6) Frame relay trunking over ATM. - frxTrunkOverAtm(7) PSX FRX trunking over ATM. - atmAccessAndTrunk(8) ATM access and trunk services. - frAccessOverAtm(9) Frame relay access over ATM using - Frame Relay Forum (FRF) scenario 1, - scenario 2 and service interworking. - frAccessAndTrunkOverAtm(10) - Frame relay access and trunking - over ATM. The access service uses FRF - network scenario 1, scenario 2 and - service interworking. - circuitEmulation(11) Circuit emulation services. - nodeSync(12) Node-level clock synchronization - services. - ipForwarding(13) IP routing over Frame Relay or ATM." REFERENCE "An indication of the services supported by this board. Boards of the same physical type may have different values for this object, depending on the services configured for the board by the NMS operator. The selection of services may also cause different software to be loaded onto the board. For the same physical board type, the software load list (SLL) may contain multiple entries, each qualified using a different value of this object as a selector. Value Meaning ------------------------------------------------------------ notSpecified(1) No specific indication is available. - This value is used for boards with - no service assignment (such as a - board in the 'spare' redundancy - role). - nodeAdmin(2) Node administration and management - services. - atmSwitching(3) ATM switching services. - frAccessAndTrunk(4) Frame relay access and trunk - services. - frxAccess(5) PSX FRX (Frame Relay eXchange) - access service. - frTrunkOverAtm(6) Frame relay trunking over ATM. - frxTrunkOverAtm(7) PSX FRX trunking over ATM. - atmAccessAndTrunk(8) ATM access and trunk services. - frAccessOverAtm(9) Frame relay access over ATM using - Frame Relay Forum (FRF) scenario 1, - scenario 2 and service interworking. - frAccessAndTrunkOverAtm(10) - Frame relay access and trunking - over ATM. The access service uses FRF - network scenario 1, scenario 2 and - service interworking. - circuitEmulation(11) Circuit emulation services. - nodeSync(12) Node-level clock synchronization - services. - ipForwarding(13) IP routing over Frame Relay or ATM." ::= { adnBoardEntry 13 } adnBoardTestResult OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), otherResult(1), resultOK(2), internalError(3), actionAborted(4), hardwareTestNOK(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object gives the hardware tests or rebuild result. For boards other than CU (Control Unit) boards, this object is not significant and its value is always zero. value result ----- ------------------ 0 not significant 1 other result 2 The test or rebuild has been successfuly executed and no problem has been detected 3 Internal error : HSS software error 4 Action aborted : the test or rebuilt has aborted during execution 5 Hardware tests not OK : the hardware tests have been executed but the result is hardware problem." ::= { adnBoardEntry 14 } adnEepromTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnEepromEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the EEPROM table." ::= { adnNodeSupervisionMIB 3 } adnEepromEntry OBJECT-TYPE SYNTAX AdnEepromEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the EEPROM table. There is one entry for a given board, as there is one EEPROM on each board. The index corresponds to equipment type 'card' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnEepromTable 1 } AdnEepromEntry ::= SEQUENCE { adnEepromSerialNumber DisplayString, adnEepromBoardName DisplayString, adnEepromPartNumberAndVariant DisplayString, adnEepromIcs DisplayString, adnEepromIcsChangeDate DisplayString, adnEepromFlashIdentifier DisplayString, adnEepromLastRepairDate DisplayString, adnEepromWarrantyEndDate DisplayString } adnEepromSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the serial number of the card." ::= { adnEepromEntry 1 } adnEepromBoardName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the card type mnemonic." ::= { adnEepromEntry 2 } adnEepromPartNumberAndVariant OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Alcatel code for the card and its variant." ::= { adnEepromEntry 3 } adnEepromIcs OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Item Change Status of the card." ::= { adnEepromEntry 4 } adnEepromIcsChangeDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the date of application of a change order." ::= { adnEepromEntry 5 } adnEepromFlashIdentifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This identifies the software loaded on flash EPROM." ::= { adnEepromEntry 6 } adnEepromLastRepairDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the date of most recent repair." ::= { adnEepromEntry 7 } adnEepromWarrantyEndDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the date of end of warranty." ::= { adnEepromEntry 8 } adnAeiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAeiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the AEI (ATM Electrical Interface) port table." ::= { adnNodeSupervisionMIB 4 } adnAeiPortEntry OBJECT-TYPE SYNTAX AdnAeiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the AEI (ATM Electrical Interface) port table. There is one entry for each port of a given ATM board, that is, two entries for HSC (High Speed Coupler) and CIG (Cell Interconnection Gateway) boards, sixteen entries for ASE (ATM Switching Element) boards. The index corresponds to equipment type 'aeiPort' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnAeiPortTable 1 } AdnAeiPortEntry ::= SEQUENCE { adnAeiPortActiveOrNot INTEGER, adnAeiPortErOrWngStatus INTEGER, adnAeiPortStatus INTEGER, adnAeiPortTestResult INTEGER, adnAeiPortLinkId INTEGER } adnAeiPortActiveOrNot OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the active/standby mode of the port; it applies to all ATM boards." ::= { adnAeiPortEntry 1 } adnAeiPortErOrWngStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "This variable indicates the gravity of a port failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnAeiPortStatus (which defines the port's failure status). The adnAeiPortErOrWngStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status." ::= { adnAeiPortEntry 2 } adnAeiPortStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. For all ATM boards, except the ASE (ATM Switching Element) board, the bit positions are listed below. Errors followed by an asterisk apply to ASE boards. 1 : adnAeiPortOOS* out-of-synchronization ATM Electrical Interface 4 : adnAeiPortNFOF* network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH* corrected errors in cell header 32 : adnAeiPortUCECH* uncorrected errors in cell header 64 : adnAeiPortCRCMA1 CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE* parity errors on payload 4096 : adnAeiPortNMA1* no active maintenance cell received 16384 : adnAeiPortEMA1* error active maintenance cell received 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI* cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL* AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC* CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side For the ASE (ATM Switching Element) board, there are specific defects corresponding to the following bit positions : 2 : adnAeiPortLOS loss-of-synchronization AEI 512 : adnAeiPortRTAG error in routing tag data 1073741830: adnAeiPortURC unrouted cells N.B.: This variable is significant when the operational state of the port is disabled. When there is no port error, this variable has the value 0." ::= { adnAeiPortEntry 3 } adnAeiPortTestResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "This is the result of the last test launched on the port. It is a bit map represented as a sum; therefore each bit corresponds to a possible cause for a failing test result ('0' if test succeeded, '1' if test failed). For HSC (High Speed Coupler) or CIG (Cell Interconnection Gateway) boards, the bit positions are: 1 : failure in the BGIEM chip RAM 2 : failure in loopback test in the BGAEI chip. For ASE (ATM Switching Element) boards, the bit position is: 2 : failure in loopback test in the BGAT1 chip. N.B.: When no test has been launched, this variable has the value zero." ::= { adnAeiPortEntry 4 } adnAeiPortLinkId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the adnEquipIndex of the AEI (ATM Electrical Interface) port on the ASE (ATM Switching Element) board which is linked with this AEI port." ::= { adnAeiPortEntry 5 } adnProcessorTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the processor table." ::= { adnNodeSupervisionMIB 6 } adnProcessorEntry OBJECT-TYPE SYNTAX AdnProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the processor table. There is one entry for each processor of a given board. The index corresponds to equipment type 'processor' in the adnEquipTable." INDEX { adnEquipType, adnEquipIndex } ::= { adnProcessorTable 1 } AdnProcessorEntry ::= SEQUENCE { adnProcessorErOrWngStatus INTEGER (-2147483648..2147483647), adnProcessorStatus INTEGER (-2147483648..2147483647) } adnProcessorErOrWngStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "This variable indicates the gravity of a processor failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnProcessorStatus (which defines the processor's failure status). The adnProcessorErOrWngStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status." ::= { adnProcessorEntry 1 } adnProcessorStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for ATM board processors. For all ATM boards except the ASE (ATM Switching Element),the bit positions are : 1 : adnProcessorUFOF user FIFO overflow 2 : adnProcessorUFRF user FIFO read failure 4 : adnProcessorNFOF network FIFO overflow 8 : adnProcessorPHTRAMP BGPHT chip RAM parity error 16 : adnProcessorNFRF network FIFO read failure 32 : adnProcessorNAVC cells received on non-active VC 64 : adnProcessorNAVP cells received on non-active VP 128 : adnProcessorRBOF reception cell buffer overflow 512 : adnProcessorPWF power failure For the ASE board, the bit positions are : 16384 : adnProcessorQRP0RAMP BGQRP-0 chip RAM parity error 32768 : adnProcessorQRP0DMA BGQRP-0 chip DMA (Direct Memory Access) error 65536 : adnProcessorQRP0FIFO BGQRP-0 chip extraction FIFO error 131072 : adnProcessorQRP1RAMP BGQRP-1 chip RAM parity error 262144 : adnProcessorQRP1DMA BGQRP-1 chip DMA error 524288 : adnProcessorQRP1FIFO BGQRP-1 chip extraction FIFO error 1048576 : adnProcessorQRP2RAMP BGQRP-2 chip RAM parity error 2097152 : adnProcessorQRP2DMA BGQRP-2 chip DMA error 4194304 : adnProcessorQRP2FIFO BGQRP-2 chip extraction FIFO error 8388608 : adnProcessorQRP3RAMP BGQRP-3 chip RAM parity error 16777216 : adnProcessorQRP3DMA BGQRP-3 chip DMA error 33554432 : adnProcessorQRP3FIFO BGQRP-3 chip extraction FIFO error 67108864 : adnProcessorHMP0LLPC BGHMP-0 chip loss of low-priority cells 134217728 : adnProcessorHMP0LHPC BGHMP-0 chip loss of high-priority cells 268435456 : adnProcessorHMP0SYNC BGHMP-0 chip synchronization fault 536870912 : adnProcessorHMP1LLPC BGHMP-1 chip loss of low-priority cells 1073741824: adnProcessorHMP1LHPC BGHMP-1 chip loss of high-priority cells 2147483648: adnProcessorHMP1SYNC BGHMP-1 chip synchronization fault N.B.: This variable is significant when the operational state of the processor is disabled. When there is no processor error, this variable has the value 0." ::= { adnProcessorEntry 2 } adnIfAssignmentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIfAssignmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maps an ifIndex to its location." ::= { adnNodeSupervisionMIB 15 } adnIfAssignmentEntry OBJECT-TYPE SYNTAX AdnIfAssignmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ifIndex assignment table." INDEX { ifIndex } ::= { adnIfAssignmentTable 1 } AdnIfAssignmentEntry ::= SEQUENCE { adnIfAssignmentChassis INTEGER, adnIfAssignmentSlot INTEGER, adnIfAssignmentLine INTEGER (-2147483648..2147483647), adnIfAssignmentCtrlAppli INTEGER (-2147483648..2147483647), adnIfAssignmentLowIndex InterfaceIndex, adnIfAssignmentTSI INTEGER } adnIfAssignmentChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The chassis number where the control application of the ifIndex runs." ::= { adnIfAssignmentEntry 1 } adnIfAssignmentSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number where where the control application of the ifIndex runs." ::= { adnIfAssignmentEntry 2 } adnIfAssignmentLine OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The line number attached to the control application of the ifIndex." ::= { adnIfAssignmentEntry 3 } adnIfAssignmentCtrlAppli OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The control application identifier of the ifIndex." ::= { adnIfAssignmentEntry 4 } adnIfAssignmentLowIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the subordinate layer of this ifIndex." ::= { adnIfAssignmentEntry 5 } adnIfAssignmentTSI OBJECT-TYPE SYNTAX INTEGER { tsifalse(0), tsitrue(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether or not the ifIndex layer is at the top of a protocol stack." ::= { adnIfAssignmentEntry 6 } adnIpAddrAssignmentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIpAddrAssignmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table maps an ipIndex to its associate ifIndex" ::= { adnNodeSupervisionMIB 16 } adnIpAddrAssignmentEntry OBJECT-TYPE SYNTAX AdnIpAddrAssignmentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ipIndex assignment table." INDEX { adnIpAddress } ::= { adnIpAddrAssignmentTable 1 } AdnIpAddrAssignmentEntry ::= SEQUENCE { adnIpAddress IpAddress, adnIpAddrAssignmentIfindex INTEGER (-2147483648..2147483647) } adnIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "This value is the ipIndex" ::= { adnIpAddrAssignmentEntry 1 } adnIpAddrAssignmentIfindex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This value is the associate ifindex to an ipIndex" ::= { adnIpAddrAssignmentEntry 2 } adnPhysical OBJECT IDENTIFIER ::= { adnProprietary 16 } adnPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of physical or channel-level interface entries." ::= { adnPhysical 1 } adnPhyEntry OBJECT-TYPE SYNTAX AdnPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface entry containing objects for physical and channel-level interfaces." INDEX { ifIndex } ::= { adnPhyTable 1 } AdnPhyEntry ::= SEQUENCE { adnPhyChassis INTEGER, adnPhySlot INTEGER, adnPhyLine INTEGER, adnPhyChannel INTEGER } adnPhyChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the chassis that supports this ifIndex. Common Name: Chassis" ::= { adnPhyEntry 1 } adnPhySlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the slot that supports this ifIndex. Common Name: Card" ::= { adnPhyEntry 2 } adnPhyLine OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the line that supports this ifIndex. Common Name: Line" ::= { adnPhyEntry 3 } adnPhyChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the channel that supports this ifIndex. Line-level interfaces have a channel value of zero. Common Name: Channel" ::= { adnPhyEntry 4 } adnPmdMIB OBJECT IDENTIFIER ::= { adnProprietary 18 } adnPmdNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnPmdNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The objects in this table define the status of the post mortem dump (PMD) at the node level. The NMS can set or get the PMD status at the node level. The node level is the highest one in the hierarchy. If the PMD is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it may be enabled or disabled at the lower (board and processor) levels. PMD is disable means that no PMD is generated. If the PMD filter is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it may be enabled or disabled at the lower (board and processor) levels. PMD filter is disable means that no filter is applicated for each generated PMD. At each PMD a file is created. If the kind of PMD is 'free' at the node level, the kind of PMD generated is determined by the value at the board level. If it is not 'free', the generated PMD is the most complete kind of those indicated at the node, board and processor levels. The kind of PMD order is as follows (from least to most complete): . min -> short -> long -> full." ::= { adnPmdMIB 1 } adnPmdNodeEntry OBJECT-TYPE SYNTAX AdnPmdNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the node table." INDEX { adnNodeIndex } ::= { adnPmdNodeTable 1 } AdnPmdNodeEntry ::= SEQUENCE { adnPmdNodeEnableDisable INTEGER, adnPmdNodeKindOfPmd INTEGER, adnPmdNodeSurveillance INTEGER, adnPmdNodeFilterStatus INTEGER } adnPmdNodeEnableDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) is enabled at the node level. The NMS can activate or deactivate the PMD using this variable." DEFVAL { enable } ::= { adnPmdNodeEntry 1 } adnPmdNodeKindOfPmd OBJECT-TYPE SYNTAX INTEGER { free(1), short(2), long(3), full(4), min(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the type of post mortem dump (PMD) to execute. This variable applies at the node level. min : post mortem dump will be minimum (only the failure ~~~ context is provided) at the board and processor . levels, unless the values of adnPmdBoardKindOfPmd . and adnPmdProcessorKindOfPmd are short, long or . full. . In this case, the more complete PMD is chosen. short : post mortem dump will be short at the board and ~~~~~ processor levels, unless the values of . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . are long or full. . In this case, the more complete PMD is chosen. . Short means only the memory areas belonging to the . faulty application and explicitly declared for the . post mortem dump are extracted from the target . memory. long : post mortem dump will be long at the board and ~~~~ processor levels, unless the values of . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . is full. . In this case, the full PMD is chosen. . Long means all the memory areas explicitly declared . by the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory) ~~~~ at the board and processor levels, no matter what . the values are for adnPmdBoardKindOfPmd and . adnPmdProcessorKindOfPmd, no matter what the memory . areas declared by the applications are. free : the post mortem dump will be processed at the board ~~~~ and processor levels according to the values of the . adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd . objects." DEFVAL { free } ::= { adnPmdNodeEntry 2 } adnPmdNodeSurveillance OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines whether or not the NMS will get the post mortem dump (PMD) files from the node's to_nms transfer directory. If the node is under surveillance (enable) the NMS won't get the PMD files from the to_nms transfer directory but the PMD files continues to be created in this directory. This causes no modification of the PMD mechanism behavior." DEFVAL { disable } ::= { adnPmdNodeEntry 3 } adnPmdNodeFilterStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) filter is enabled at the node level. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at node level (either enable or disable). The node level is the highest one in the hierarchy. If the PMD filter is disabled at the node level, it is also disabled at the board and processor levels. If it is enabled at the node level, it is enabled or disabled at board level according to the status at this level." DEFVAL { enable } ::= { adnPmdNodeEntry 4 } adnPmdBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnPmdBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The objects in this table define the status of the post mortem dump (PMD) at the board level. The NMS can set or get the PMD status at the board level. If the PMD is disabled at the board level, it is also disabled at the processor level. If it is enabled at the board level, it may be enabled or disabled at the lower (processor) level. PMD is disable means that no PMD is generated. If the PMD filter is disabled at the board level, it is also disabled at the processor level. If it is enabled at the board level, it may be enabled or disabled at the lower (processor) level. PMD filter is disable means that no filter is applicated for each generated PMD. At each PMD a file is created. If the kind of PMD is 'free' at the board level, the kind of PMD generated is determined by the value at the processor level. If it is not 'free', the generated PMD is the most complete kind of those indicated at the board and processor levels. The kind of PMD order is as follows (from least to most complete): . min -> short -> long -> full." ::= { adnPmdMIB 2 } adnPmdBoardEntry OBJECT-TYPE SYNTAX AdnPmdBoardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the board table. There will be one entry for each board of a given node." INDEX { adnEquipIndex } ::= { adnPmdBoardTable 1 } AdnPmdBoardEntry ::= SEQUENCE { adnPmdBoardEnableDisable INTEGER, adnPmdBoardKindOfPmd INTEGER, adnPmdBoardFilterStatus INTEGER } adnPmdBoardEnableDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) is enabled at the board level. The PMD is enabled at the board level only if it is also enabled at the node level." DEFVAL { enable } ::= { adnPmdBoardEntry 1 } adnPmdBoardKindOfPmd OBJECT-TYPE SYNTAX INTEGER { free(1), short(2), long(3), full(4), min(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the type of post mortem dump (PMD) to execute. This variable applies at the board level. min : post mortem dump will be minimum (only the failure ~~~ context is provided) at the processor level, unless . the value of adnPmdProcessorKindOfPmd is short, . long or full. . In this case, the more complete PMD is chosen. short : post mortem dump will be short at the processor ~~~~~ level, unless the value of adnPmdProcessorKindOfPmd . is long or full. . In this case, the more complete PMD is chosen. . Short means only the memory areas belonging to the . faulty application and explicitly declared for the . post mortem dump are extracted from the target . memory. long : post mortem dump will be long at the processor ~~~~ level, unless the value of adnPmdProcessorKindOfPmd . is full. . In this case, the full PMD is chosen. . Long means all the memory areas explicitly declared . by the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory) ~~~~ at the processor level, no matter what the value is . for adnPmdProcessorKindOfPmd, no matter what the . memory areas declared by the applications are. free : post mortem dump will be processed at the ~~~~ processor level according to the value of the . adnPmdProcessorKindOfPmd object." DEFVAL { free } ::= { adnPmdBoardEntry 2 } adnPmdBoardFilterStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) filter is enabled at the board level. The PMD filter is enabled at the board level only if it is also enabled at the node level. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at board level (either enable or disable)." DEFVAL { enable } ::= { adnPmdBoardEntry 3 } adnPmdProcessorTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnPmdProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object defines the status of the post mortem dump (PMD) at the processor level. The NMS can set or get the PMD status at the processor level." ::= { adnPmdMIB 3 } adnPmdProcessorEntry OBJECT-TYPE SYNTAX AdnPmdProcessorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the processor table. There will be one entry for each processor of a given board." INDEX { adnEquipIndex } ::= { adnPmdProcessorTable 1 } AdnPmdProcessorEntry ::= SEQUENCE { adnPmdProcessorEnableDisable INTEGER, adnPmdProcessorKindOfPmd INTEGER, adnPmdProcessorFilterStatus INTEGER } adnPmdProcessorEnableDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) is enabled at the processor level. The PMD is enabled at the processor level only if it is also enabled at the board and node levels." DEFVAL { enable } ::= { adnPmdProcessorEntry 1 } adnPmdProcessorKindOfPmd OBJECT-TYPE SYNTAX INTEGER { free(1), short(2), long(3), full(4), min(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the type of post mortem dump (PMD) to execute. This variable applies at the processor level. min : post mortem dump will provide failure context only. ~~~ short : only the memory areas belonging to the faulty ~~~~~ application and explicitly declared for the post . mortem dump are extracted from the target memory. long : all the memory areas explicitly declared by ~~~~ the applications for the post mortem dump are . extracted from the target memory. full : post mortem dump will be full (entire memory), no ~~~~ matter what the memory areas declared by the . applications are. free : the post mortem dump mechanism will decide itself ~~~~ the kind of PMD to do." DEFVAL { free } ::= { adnPmdProcessorEntry 2 } adnPmdProcessorFilterStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines whether or not the post mortem dump (PMD) filter is enabled at the processor level. The PMD filter is enabled at the processor level only if it is also enabled at board and node levels. The NMS can activate, deactivate or reset the PMD filter using this variable. After the reset action, the variable takes back its previous value at processor level (either enable or disable)." DEFVAL { enable } ::= { adnPmdProcessorEntry 3 } adnFranpTrunkServiceMIB OBJECT IDENTIFIER ::= { adnProtocols 1 } adnFrtChanTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrtChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines all the channels configured for FRANP (Frame Relay Alcatel Network Protocol). There is no existing standard MIB for Alcatel's internal network protocol. This table is owned by FRANP Signalling software module." ::= { adnFranpTrunkServiceMIB 1 } adnFrtChanEntry OBJECT-TYPE SYNTAX AdnFrtChanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the channel table. There will be one entry for each FRANP (Frame Relay Alcatel Network Protocol) channel configured." INDEX { ifIndex } ::= { adnFrtChanTable 1 } AdnFrtChanEntry ::= SEQUENCE { adnFrtChanType INTEGER, adnFrtChanAddrDLCILen INTEGER, adnFrtChanRNodeID AdnRoutingID, adnFrtChanRifIndex InterfaceIndex, adnFrtChanBAT AdnPercent, adnFrtChanNxOverBcsUser INTEGER (-2147483648..2147483647), adnFrtChanNxOverBcsNet INTEGER (-2147483648..2147483647), adnFrtChanNxOverBe INTEGER (-2147483648..2147483647), adnFrtChanMaxBcsUser AdnPercent, adnFrtChanMaxBcsNet AdnPercent, adnFrtChanMaxBe AdnPercent, adnFrtChanMaxCrf INTEGER (-2147483648..2147483647), adnFrtChanMinDlci INTEGER (-2147483648..2147483647), adnFrtChanMaxDlci INTEGER (-2147483648..2147483647), adnFrtChanTotalNumDlci INTEGER (-2147483648..2147483647), adnFrtChanUserNetFlg INTEGER, adnFrtChanTPXBc2HSSBcsUsr INTEGER, adnFrtChanTPXBc2HSSBcsNet INTEGER, adnFrtChanStatistics AdnEnableDisabled, adnFrtChanT303 INTEGER (-2147483648..2147483647), adnFrtChanT305 INTEGER (-2147483648..2147483647), adnFrtChanT308 INTEGER (-2147483648..2147483647), adnFrtChanT309 INTEGER (-2147483648..2147483647), adnFrtChanT310 INTEGER (-2147483648..2147483647), adnFrtChanT313 INTEGER (-2147483648..2147483647), adnFrtChanT315 INTEGER (-2147483648..2147483647), adnFrtChanT316 INTEGER (-2147483648..2147483647), adnFrtChanT317 INTEGER (-2147483648..2147483647), adnFrtChanT320 INTEGER (-2147483648..2147483647), adnFrtChanNxOverBeControl AdnEnableDisabled, adnFrtChanMonetaryCost INTEGER (-2147483648..2147483647), adnFrtChanDelayMeasured INTEGER (-2147483648..2147483647), adnFrtChanDelayInUse INTEGER (-2147483648..2147483647), adnFrtChanDelayReMeasReq INTEGER, adnFrtChanDefaultCos AdnFrCos, adnFrtChanPerDlyIntrv INTEGER, adnFrtChanTotalUsrPVCsUp INTEGER (-2147483648..2147483647), adnFrtChanTotalUsrSVCsUp INTEGER (-2147483648..2147483647) } adnFrtChanType OBJECT-TYPE SYNTAX INTEGER { other(1), hss(2), tpx(3), frx(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the type of network interface for this trunk port. Common Name: FR Trunk Type" DEFVAL { hss } ::= { adnFrtChanEntry 1 } adnFrtChanAddrDLCILen OBJECT-TYPE SYNTAX INTEGER { twoOctets10Bits(1), threeOctets10Bits(2), threeOctets16Bits(3), fourOctets17Bits(4), fourOctets23Bits(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the Q.922 address field length and DLCI (data link connection identifier) length for this trunk port." DEFVAL { twoOctets10Bits } ::= { adnFrtChanEntry 2 } adnFrtChanRNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This is the remote routing node ID." ::= { adnFrtChanEntry 3 } adnFrtChanRifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the interface on the remote node on which this VC is carried. This ifIndex has no local significance." ::= { adnFrtChanEntry 4 } adnFrtChanBAT OBJECT-TYPE SYNTAX AdnPercent -- UNITS Percent ACCESS read-only STATUS mandatory DESCRIPTION "This is the bandwidth allocation threshold for the channel. A value exceeding 80% is not recommended for sustained traffic loads. The values for adnFrtChanMaxBcsUser, adnFrtChanMaxBcsNet, and adnFrtChanMaxBe must be less than or equal to the value of adnFrtChanBAT. Common Name: BAT(%)" DEFVAL { 80 } ::= { adnFrtChanEntry 5 } adnFrtChanNxOverBcsUser OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of times Bcs (statistically committed data rate) can be over-subscribed for user traffic on the channel. Common Name: # Times Over Subscribe Bcs-User" DEFVAL { 3 } ::= { adnFrtChanEntry 6 } adnFrtChanNxOverBcsNet OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of times Bcs (statistically committed data rate) can be over-subscribed for net- work traffic on the channel. Common Name: # Times Over Subscribe Bcs-Network" DEFVAL { 3 } ::= { adnFrtChanEntry 7 } adnFrtChanNxOverBe OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of times Be (excess burst data rate) can be over-subscribed for the channel. Common Name: # Times Over Subscribe Be" DEFVAL { 10 } ::= { adnFrtChanEntry 8 } adnFrtChanMaxBcsUser OBJECT-TYPE SYNTAX AdnPercent ACCESS read-only STATUS mandatory DESCRIPTION "This field represents the maximum percentage of the channel bandwidth allowed for Bcs (statistically committed data rate) users. It is specified as a percentage of the total bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for User Bcs Traffic" DEFVAL { 50 } ::= { adnFrtChanEntry 9 } adnFrtChanMaxBcsNet OBJECT-TYPE SYNTAX AdnPercent ACCESS read-only STATUS mandatory DESCRIPTION "This field represents the maximum percentage of the channel bandwidth allowed for Bcs (statistically committed data rate) network traffic. It is specified as a percentage of the total bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for Ntwk Bcs Traffic" DEFVAL { 50 } ::= { adnFrtChanEntry 10 } adnFrtChanMaxBe OBJECT-TYPE SYNTAX AdnPercent ACCESS read-only STATUS mandatory DESCRIPTION "This field represents the maximum percentage of the channel bandwidth allowed for Be(excess burst data rate). It is specified as a percentage of the total channel bandwidth. It cannot exceed BAT (bandwidth allocation threshold). Therefore, the default value for this field should be no more than the minimum percentage specified for the BAT. Common Name: Max BW for Be Traffic" DEFVAL { 50 } ::= { adnFrtChanEntry 11 } adnFrtChanMaxCrf OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum number of user calls permitted on the trunk. Common Name: Max Num User Calls" DEFVAL { 80 } ::= { adnFrtChanEntry 12 } adnFrtChanMinDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the minimum user DLCI (data link connection identifier) number permitted on the trunk. Common Name: Min DLCI Number" DEFVAL { 16 } ::= { adnFrtChanEntry 13 } adnFrtChanMaxDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum user DLCI (data link connection identifier) number permitted on the trunk. Common Name: Max DLCI Number" DEFVAL { 991 } ::= { adnFrtChanEntry 14 } adnFrtChanTotalNumDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the current number of user DLCI (data link connection identifier) on the trunk. Common Name: # VC" ::= { adnFrtChanEntry 15 } adnFrtChanUserNetFlg OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the trunk follows the user or network side of the protocol recommendations. Common Name: User/Network Protocol" DEFVAL { user } ::= { adnFrtChanEntry 16 } adnFrtChanTPXBc2HSSBcsUsr OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This flag indicates the conversion from TPX user Bc (committed data rate) to HSS user Bcs (statistically committed data rate) if a channel is configured as a TPX Interworking Function (IWF) channel. An IWF is a trunk line connecting a TPX to an HSS. Common Name: Convert TPX Bc to HSS User Bcs" DEFVAL { false } ::= { adnFrtChanEntry 17 } adnFrtChanTPXBc2HSSBcsNet OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This flag indicates the conversion from TPX network Bc (committed data rate) to HSS user Bcs (statistically committed data rate) if a channel is configured as a TPX Interworking Function (IWF) channel. An IWF is a trunk line connecting a TPX to an HSS. Common Name: Convert TPX Bc to HSS Ntwk Bcs" DEFVAL { false } ::= { adnFrtChanEntry 18 } adnFrtChanStatistics OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if statistics are enabled on this channel. Common Name: Statistics" DEFVAL { enabled } ::= { adnFrtChanEntry 19 } adnFrtChanT303 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a setup response. If the timer expires, then the setup message is retransmitted. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 20 } adnFrtChanT305 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a disconnect response. If the timer expires, then the release message is transmitted. The timer value is expressed in seconds." DEFVAL { 900 } ::= { adnFrtChanEntry 21 } adnFrtChanT308 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a release response. If the timer expires the first time, then the release message is retransmitted. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 22 } adnFrtChanT309 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This data link timer specifies the amount of time to wait for re-establishment of the LAPD (link access procedure on the D-channel) message. If the timer expires, all calls will be cleared. Otherwise, calls in stable states are not lost. The timer value is expressed in seconds." DEFVAL { 90 } ::= { adnFrtChanEntry 23 } adnFrtChanT310 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a Call Proceeding response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 300 } ::= { adnFrtChanEntry 24 } adnFrtChanT313 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a connect response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 25 } adnFrtChanT315 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a status inquiry response. If the timer expires, then the call is cleared by transmitting a disconnect message. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 26 } adnFrtChanT316 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait for a restart response. If the timer expires, then the restart message is re-transmitted. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 27 } adnFrtChanT317 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Not used for Release 2.0. Reserved for future use. This restart confirm timer specifies the amount of time to wait for clearing all the calls. The timer value is expressed in seconds." DEFVAL { 120 } ::= { adnFrtChanEntry 28 } adnFrtChanT320 OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Not used for Release 2.0. Reserved for future use. This inactivity timer specifies the amount of time to wait for a response to a call. The timer value is expressed in seconds." DEFVAL { 600 } ::= { adnFrtChanEntry 29 } adnFrtChanNxOverBeControl OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether the oversubscription factor for Be is enabled or disabled. When disabled, the value for Be is not taken into account when allocating bandwidth for a call. Common Name: Be oversubscription factor control" DEFVAL { enabled } ::= { adnFrtChanEntry 30 } adnFrtChanMonetaryCost OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "adnFrtChanMonetaryCost identifies the monetary cost of this channel. This is an arbitrary value and is significant only in relation to the monetary cost of other links. The cost is used for route selection. A value of 0 means that this cost is not taken into account for route selection Common name: Monetary Cost" DEFVAL { 0 } ::= { adnFrtChanEntry 31 } adnFrtChanDelayMeasured OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The sum of the transmission and queueing delays (in milliseconds) measured on this channel. Common Name: Measured Delay Cost" ::= { adnFrtChanEntry 32 } adnFrtChanDelayInUse OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-write STATUS mandatory DESCRIPTION "The sum of the transmission and queueing delays (in milliseconds) currently used as delay cost for this channel. Common Name: Delay Cost In Use" ::= { adnFrtChanEntry 33 } adnFrtChanDelayReMeasReq OBJECT-TYPE SYNTAX INTEGER { notInProgress(1), inProgress(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Request for a new delay measurement. When set to inProgress a new delay measurement is initiated and the result is stored in the object adnFrtChanDelayMeasured." ::= { adnFrtChanEntry 34 } adnFrtChanDefaultCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-write STATUS mandatory DESCRIPTION "The Class of Service that is applied to call with no Class of Service specified." DEFVAL { cosNrt } ::= { adnFrtChanEntry 35 } adnFrtChanPerDlyIntrv OBJECT-TYPE SYNTAX INTEGER -- UNITS second ACCESS read-write STATUS mandatory DESCRIPTION "This field defines the periodic delay sampling interval in seconds. When this interval expires, the line delay will automatically be measured. A zero value will disable periodic delay measurments." DEFVAL { 60 } ::= { adnFrtChanEntry 36 } adnFrtChanTotalUsrPVCsUp OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the current number of user PVCs for which the value of adnFrtVCOperState is up. Common Name: # PVC" ::= { adnFrtChanEntry 37 } adnFrtChanTotalUsrSVCsUp OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the current number of user SVCs for which the value of adnFrtVCOperState is up. Common Name: # SVC" ::= { adnFrtChanEntry 38 } adnFrtCosTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrtCosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " This is the Class of Service table for FRANP trunk protocol." ::= { adnFranpTrunkServiceMIB 5 } adnFrtCosEntry OBJECT-TYPE SYNTAX AdnFrtCosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Class of Service table entry for FRANP trunk protocol." INDEX { ifIndex, adnFrtCosIndex } ::= { adnFrtCosTable 1 } AdnFrtCosEntry ::= SEQUENCE { adnFrtCosIndex AdnFrCos, adnFrtCosAdminStatus AdnFrCosAdminStatus, adnFrtCosOperStatus AdnFrCosOperStatus } adnFrtCosIndex OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-only STATUS mandatory DESCRIPTION "The Cos (Class Of Service) index for a specific class of service managed by this frame relay interface." ::= { adnFrtCosEntry 1 } adnFrtCosAdminStatus OBJECT-TYPE SYNTAX AdnFrCosAdminStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of this Class of Service. Set to locked(2) it will cause any new calls to this Class of Service be rejected. Set to unlocked(1) it will cause resumption of the normal operation." ::= { adnFrtCosEntry 2 } adnFrtCosOperStatus OBJECT-TYPE SYNTAX AdnFrCosOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the operational status of this Class of Service. A value of locked(2) indicates that any new calls will be rejected for this Class of Service. A value of unlocked(1) indicates normal operation." ::= { adnFrtCosEntry 3 } adnFrtChanStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrtChanStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines all the channel level statistics for FRANP_SW subsystem." ::= { adnFranpTrunkServiceMIB 2 } adnFrtChanStatsEntry OBJECT-TYPE SYNTAX AdnFrtChanStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the channel level statistics table. There wll be one entry for each FRANP (Frame Relay Alcatel Network Protocol) channel configured." INDEX { ifIndex } ::= { adnFrtChanStatsTable 1 } AdnFrtChanStatsEntry ::= SEQUENCE { adnFrtChanStatsCommitEgress INTEGER (-2147483648..2147483647), adnFrtChanStatsCommitIngress INTEGER (-2147483648..2147483647), adnFrtChanStatsOverEgress INTEGER (-2147483648..2147483647), adnFrtChanStatsOverIngress INTEGER (-2147483648..2147483647), adnFrtChanStatsBcInDiscards Counter, adnFrtChanStatsBcsInDiscards Counter, adnFrtChanStatsBeInDiscards Counter, adnFrtChanStatsBcOutDiscards Counter, adnFrtChanStatsBcsOutDiscards Counter, adnFrtChanStatsBeOutDiscards Counter, adnFrtChanStatsCongsState AdnCongestLevels, adnFrtChanStatsCosRtBcEgress INTEGER (-2147483648..2147483647), adnFrtChanStatsCosRtBcIngress INTEGER (-2147483648..2147483647), adnFrtChanStatsCosNrtBcEgress INTEGER (-2147483648..2147483647), adnFrtChanStatsCosNrtBcIngress INTEGER (-2147483648..2147483647) } adnFrtChanStatsCommitEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed egress bandwidth. Common Name: Commit Egress" ::= { adnFrtChanStatsEntry 2 } adnFrtChanStatsCommitIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed ingress bandwidth. Common Name: Commit Ingress" ::= { adnFrtChanStatsEntry 3 } adnFrtChanStatsOverEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of overcommitted egress bandwidth. Common Name: Over Egress" ::= { adnFrtChanStatsEntry 4 } adnFrtChanStatsOverIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of overcommitted ingress bandwidth. Common Name: Over Ingress" ::= { adnFrtChanStatsEntry 5 } adnFrtChanStatsBcInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of all of Bc (committed data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Bc Discards In" ::= { adnFrtChanStatsEntry 6 } adnFrtChanStatsBcsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of all Bcs (statistically committed data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Bcs Discards In" ::= { adnFrtChanStatsEntry 7 } adnFrtChanStatsBeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of all Be (excess burst data rate) sub-frames that were discarded for ingress TPX IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Be Discards In" ::= { adnFrtChanStatsEntry 8 } adnFrtChanStatsBcOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the sum of Bc (committed data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Bc Discards Out" ::= { adnFrtChanStatsEntry 9 } adnFrtChanStatsBcsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the sum of Bcs (statistically committed data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Bcs Discards Out" ::= { adnFrtChanStatsEntry 10 } adnFrtChanStatsBeOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the sum of Be (excess burst data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion. Common Name: Be Discards Out" ::= { adnFrtChanStatsEntry 11 } adnFrtChanStatsCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the congestion level of this channel in the transmit direction. It monitors the line driver transmit queue depth." ::= { adnFrtChanStatsEntry 12 } adnFrtChanStatsCosRtBcEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed egress bandwidth for Class of Service RT. Common Name: Real Time Data Bc Commit Egress" ::= { adnFrtChanStatsEntry 13 } adnFrtChanStatsCosRtBcIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed ingress bandwidth for Class of Service RT. Common Name: Real Time Data Bc Commit Ingress" ::= { adnFrtChanStatsEntry 14 } adnFrtChanStatsCosNrtBcEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed egress bandwidth for Class of Service NRT. Common Name: Non-Real Time Data Bc Commit Egress" ::= { adnFrtChanStatsEntry 15 } adnFrtChanStatsCosNrtBcIngress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits per second ACCESS read-only STATUS mandatory DESCRIPTION "This is the sum of committed ingress bandwidth for Class of Service NRT. Common Name: Non-Real Time Data Bc Commit Ingress" ::= { adnFrtChanStatsEntry 16 } adnFrtVCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrtVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the VC table for FRANP (Frame Relay Alcatel Network Protocol) trunk protocol. This table is owned by FRANP Signalling software module." ::= { adnFranpTrunkServiceMIB 3 } adnFrtVCEntry OBJECT-TYPE SYNTAX AdnFrtVCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VC table entry." INDEX { ifIndex, adnFrtVCDLCIIndex } ::= { adnFrtVCTable 1 } AdnFrtVCEntry ::= SEQUENCE { adnFrtVCDLCIIndex INTEGER (-2147483648..2147483647), adnFrtVCSetupDir INTEGER, adnFrtVCAdminState INTEGER, adnFrtVCOperState INTEGER, adnFrtVCForcedPath INTEGER, adnFrtVCTrafficType INTEGER, adnFrtVCState INTEGER, adnFrtVCRemoteDlci INTEGER (-2147483648..2147483647), adnFrtVCRemoteDlciLen INTEGER (-2147483648..2147483647), adnFrtVCRemoteifIndex InterfaceIndex, adnFrtVCAdjacentNodeID AdnRoutingID, adnFrtVCAdjacentifIndex InterfaceIndex, adnFrtVCBcForward INTEGER (-2147483648..2147483647), adnFrtVCBcBackward INTEGER (-2147483648..2147483647), adnFrtVCBeForward INTEGER (-2147483648..2147483647), adnFrtVCBeBackward INTEGER (-2147483648..2147483647), adnFrtVCBcsForward INTEGER (-2147483648..2147483647), adnFrtVCBcsBackward INTEGER (-2147483648..2147483647), adnFrtVCCirForward INTEGER (-2147483648..2147483647), adnFrtVCCirBackward INTEGER (-2147483648..2147483647), adnFrtVCDelayCostRem INTEGER (-2147483648..2147483647), adnFrtVCMonetaryCostRem INTEGER (-2147483648..2147483647), adnFrtVCHopCostRem INTEGER (-2147483648..2147483647), adnFrtVCRoutingMode INTEGER, adnFrtVCPathSelectMode INTEGER, adnFrtVCRtsCritID INTEGER, adnFrtVCType INTEGER, adnFrtVCCos AdnFrCos } adnFrtVCDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is equal to the DLCI (data link connection identifier) value for the frame relay trunk. Common Name: Local DLCI" ::= { adnFrtVCEntry 1 } adnFrtVCSetupDir OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The direction of the setup message. It can be either entering the node (ingress) or exiting the node (egress)." ::= { adnFrtVCEntry 2 } adnFrtVCAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the call. Common Names: Administrative, Status Administrative" ::= { adnFrtVCEntry 3 } adnFrtVCOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the call. Common Names: Operational, Status Operational" ::= { adnFrtVCEntry 4 } adnFrtVCForcedPath OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "This specifies that this VC must take a forced path through the network." ::= { adnFrtVCEntry 5 } adnFrtVCTrafficType OBJECT-TYPE SYNTAX INTEGER { usercall(1), networkcall(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if this is a user or network call. The priority given to each type of call's data in the network differs: user call priority = customer traffic; network call priority = network traffic such as alarms, accounting, and statistics." ::= { adnFrtVCEntry 6 } adnFrtVCState OBJECT-TYPE SYNTAX AdnFrtVCStates ACCESS read-only STATUS mandatory DESCRIPTION "This defines the states that are implemented and supported for the Frame Relay Alcatel Network Protocol signalling interface on the trunk." ::= { adnFrtVCEntry 7 } adnFrtVCRemoteDlci OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ingress DLCI (data link connection identifier) associated with the VC. Common Name: Remote DLCI" ::= { adnFrtVCEntry 8 } adnFrtVCRemoteDlciLen OBJECT-TYPE SYNTAX INTEGER { twoOctets10Bits(1), threeOctets10Bits(2), threeOctets16Bits(3), fourOctets17Bits(4), fourOctets23Bits(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the length of the ingress VC's DLCI (data link connection identifier)." ::= { adnFrtVCEntry 9 } adnFrtVCRemoteifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the interface on the remote node on which this VC is carried. This ifIndex has no local significance." ::= { adnFrtVCEntry 10 } adnFrtVCAdjacentNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This is the routing node ID of the adjacent node to which the channel carrying this VC is connected." ::= { adnFrtVCEntry 11 } adnFrtVCAdjacentifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is the ifIndex of the interface on the adjacent node on which this VC is carried. This ifIndex has no local significance." ::= { adnFrtVCEntry 12 } adnFrtVCBcForward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 13 } adnFrtVCBcBackward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 14 } adnFrtVCBeForward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the excessive burst data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 15 } adnFrtVCBeBackward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the excessive burst data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 16 } adnFrtVCBcsForward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the statistically committed data rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 17 } adnFrtVCBcsBackward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the statistically committed data rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 18 } adnFrtVCCirForward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed information rate, in bits per second, in the forward direction. Note that forward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 19 } adnFrtVCCirBackward OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the committed information rate, in bits per second, in the backward direction. Note that backward data may be ingress or egress depending on the setting of adnFrtVCSetupDir." ::= { adnFrtVCEntry 20 } adnFrtVCDelayCostRem OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The delay cost (in milliseconds) allowed between this node and the destination node for setting up this PVC. Common Name: Remaining Delay Cost" DEFVAL { 65535 } ::= { adnFrtVCEntry 21 } adnFrtVCMonetaryCostRem OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The monetary cost allowed between this node and the destination node for setting up this VC. Common Name: Remaining Monetary Cost" DEFVAL { 0 } ::= { adnFrtVCEntry 22 } adnFrtVCHopCostRem OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops allowed between this node and the destination node for setting up this VC. Common Name: Remaining Hop Cost" DEFVAL { 10 } ::= { adnFrtVCEntry 23 } adnFrtVCRoutingMode OBJECT-TYPE SYNTAX INTEGER { bestEffort(1), considerCost(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mode used for routing this VC. When best effort is used, routing is done without regards to the cost requirement. When best effort is not used, routing must take into account the cost requirement. Common Name: Routing Mode" DEFVAL { bestEffort } ::= { adnFrtVCEntry 24 } adnFrtVCPathSelectMode OBJECT-TYPE SYNTAX INTEGER { bestFit(1), bestAvailable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The mode the path selection function must use to select a path for this VC. Best available service uses the lowest cost path(s) which meet the cost requirement as the primary path. With this approach, the first calls set up in the network potentially receive a higher quality service than calls which happen to arrive later. Best fit service uses the highest cost path(s) which meet the cost requirement as the primary path(s). This approach uses the least required resources to satisfy the cost function and conserves the higher quality of service for those calls which may require them. Common Name: Path Selection Mode" DEFVAL { bestAvailable } ::= { adnFrtVCEntry 25 } adnFrtVCRtsCritID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index into adnRtsCritSmryTable of the routing criteria applied for this VC. Common Name: Routing Criteria ID" DEFVAL { 1 } ::= { adnFrtVCEntry 26 } adnFrtVCType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the type of VC for the call." ::= { adnFrtVCEntry 27 } adnFrtVCCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Class of Service for the call." ::= { adnFrtVCEntry 28 } adnFrtVCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrtVCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the VC table for the FRANP (Frame Relay Alcatel Network Protocol) trunk protocol. This table is owned by FRANP Switching software module." ::= { adnFranpTrunkServiceMIB 4 } adnFrtVCStatsEntry OBJECT-TYPE SYNTAX AdnFrtVCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VC statistics table." INDEX { ifIndex, adnFrtVCDLCIIndex } ::= { adnFrtVCStatsTable 1 } AdnFrtVCStatsEntry ::= SEQUENCE { adnFrtVCStatsTime AdnNodeTimeStamp, adnFrtVCStatsSubFrameIN Counter, adnFrtVCStatsSubFrameOUT Counter, adnFrtVCStatsBcOutDiscards Counter, adnFrtVCStatsBcsOutDiscards Counter, adnFrtVCStatsBeOutDiscards Counter, adnFrtVCStatsIWFBcInDiscards Counter, adnFrtVCStatsIWFBcsInDiscards Counter, adnFrtVCStatsIWFBeInDiscards Counter, adnFrtVCStatsIWFBcOutDiscards Counter, adnFrtVCStatsIWFBcsOutDiscards Counter, adnFrtVCStatsIWFBeOutDiscards Counter, adnFrtVCStatsInCongsState AdnCongestLevels } adnFrtVCStatsTime OBJECT-TYPE SYNTAX AdnNodeTimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The time the VC was initialized." ::= { adnFrtVCStatsEntry 1 } adnFrtVCStatsSubFrameIN OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ingress sub-frames for this VC." ::= { adnFrtVCStatsEntry 2 } adnFrtVCStatsSubFrameOUT OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of egress sub-frames for this VC." ::= { adnFrtVCStatsEntry 3 } adnFrtVCStatsBcOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bc (committed data rate) sub-frames that were discarded for egress traffic (ie., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion." ::= { adnFrtVCStatsEntry 4 } adnFrtVCStatsBcsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for egress traffic (ie., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion." ::= { adnFrtVCStatsEntry 5 } adnFrtVCStatsBeOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Be (excess burst data rate) sub-frames that were discarded for egress traffic (i.e., TPX Interworking Function, frame relay subsystem, or frame relay switching interface) due to line driver transmit queue congestion." ::= { adnFrtVCStatsEntry 6 } adnFrtVCStatsIWFBcInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bc (committed data rate) sub-frames that were discarded for ingress TPX/IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate)." ::= { adnFrtVCStatsEntry 7 } adnFrtVCStatsIWFBcsInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for ingress TPX /IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate)." ::= { adnFrtVCStatsEntry 8 } adnFrtVCStatsIWFBeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Be (excess burst data rate) sub-frames that were discarded for ingress TPX/IWF (Interworking Function) traffic due to calendar queue congestion. Calendar queue is a mechanism to manage submission of data into the network based on the SIR (submission of information rate)." ::= { adnFrtVCStatsEntry 9 } adnFrtVCStatsIWFBcOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bc (committed data rate) sub-frames that were discarded for egress TPX/IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion." ::= { adnFrtVCStatsEntry 10 } adnFrtVCStatsIWFBcsOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Bcs (statistically committed data rate) sub-frames that were discarded for egress TPX /IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion." ::= { adnFrtVCStatsEntry 11 } adnFrtVCStatsIWFBeOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the number of Be (excess burst data rate) sub-frames that were discarded for egress TPX/IWF (Interworking Function) traffic due to XON/XOFF (flow control on and flow control off) queue congestion." ::= { adnFrtVCStatsEntry 12 } adnFrtVCStatsInCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the congestion level of this VC in the ingress direction. This state is based on the amount of data in the calendar queue, which is a mechanism to manage submission of data into the network based on the SIR (submission of information rate). Common Name: Congestion Level" ::= { adnFrtVCStatsEntry 13 } adnLapMIB OBJECT IDENTIFIER ::= { adnProtocols 2 } adnLapParamTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLapParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configurable LAP (link access procedure) parameters." ::= { adnLapMIB 1 } adnLapParamEntry OBJECT-TYPE SYNTAX AdnLapParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configured parameter values for a specific LAP (link access procedure)." INDEX { ifIndex, adnLapDLCIIndex } ::= { adnLapParamTable 1 } AdnLapParamEntry ::= SEQUENCE { adnLapDLCIIndex INTEGER (-2147483648..2147483647), adnLapParamStationType INTEGER, adnLapParamN201FrameSize INTEGER (-2147483648..2147483647), adnLapParamKWindowSize INTEGER, adnLapParamN200RxmitCount INTEGER, adnLapParamT200AckTimer INTEGER (-2147483648..2147483647), adnLapParamT203IdleTimer INTEGER (-2147483648..2147483647), adnLapParamProtocolID INTEGER, adnLapParamAlarmsEnable INTEGER, adnLapParamPerfEnable INTEGER } adnLapDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "DLCI (data link connection identifier) index." ::= { adnLapParamEntry 1 } adnLapParamStationType OBJECT-TYPE SYNTAX INTEGER { other(1), network(2), user(3), layer-3-selects(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the desired station type of this interface." DEFVAL { layer-3-selects } ::= { adnLapParamEntry 2 } adnLapParamN201FrameSize OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS bits ACCESS read-only STATUS mandatory DESCRIPTION "The default maximum N201 information field size (in number of bits) for a frame the DCE/remote DTE exchanges with this DTE. This excludes flags and 0 bits inserted for transparency." DEFVAL { 32768 } ::= { adnLapParamEntry 3 } adnLapParamKWindowSize OBJECT-TYPE SYNTAX INTEGER -- UNITS PDUs ACCESS read-only STATUS mandatory DESCRIPTION "The default window size for this interface. This is the maximum number of unacknowledged sequenced PDUs (protocol data units) that may be outstanding from this DTE at any one time." DEFVAL { 4 } ::= { adnLapParamEntry 4 } adnLapParamN200RxmitCount OBJECT-TYPE SYNTAX INTEGER -- UNITS PDU retransmissions ACCESS read-only STATUS mandatory DESCRIPTION "The default N200 retry counter for this interface. This specifies the number of times a PDU (protocol data unit) will be resent after timer T200 expires without acknowledging the PDU." DEFVAL { 3 } ::= { adnLapParamEntry 5 } adnLapParamT200AckTimer OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The default T200 timer for this interface. This specifies the maximum time (in milliseconds) to wait for acknowledgment of a PDU (protocol data unit)." DEFVAL { 1000 } ::= { adnLapParamEntry 6 } adnLapParamT203IdleTimer OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The T203 timer for this interface. This specifies the maximum time (in milliseconds) to allow without frames being exchanged on the data link. A value of '2147483647' indicates that no idle timer is being kept." DEFVAL { 10000 } ::= { adnLapParamEntry 7 } adnLapParamProtocolID OBJECT-TYPE SYNTAX INTEGER { other(1), lapdQ921(2), lapfQ922(3), layer-3-selects(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This identifies the protocol to be used on this interface. Common name: Protocol" DEFVAL { layer-3-selects } ::= { adnLapParamEntry 8 } adnLapParamAlarmsEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not alarm generation is enabled for this interface." DEFVAL { enabled } ::= { adnLapParamEntry 9 } adnLapParamPerfEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not statistics generation is enabled for this interface." DEFVAL { enabled } ::= { adnLapParamEntry 10 } adnLapFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnLapFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the objects recorded by LAP (link access procedure) to provide information about the traffic flow through the interface." ::= { adnLapMIB 3 } adnLapFlowEntry OBJECT-TYPE SYNTAX AdnLapFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains information regarding the effects of flow controls in LAP (link access procedure)." INDEX { ifIndex, adnLapDLCIIndex } ::= { adnLapFlowTable 1 } AdnLapFlowEntry ::= SEQUENCE { adnLapFlowStateChanges Counter, adnLapFlowChangeReason INTEGER, adnLapFlowCurrentMode INTEGER, adnLapFlowBusyDefers Counter, adnLapFlowRejOutPkts Counter, adnLapFlowRejInPkts Counter, adnLapFlowT200Timeouts Counter, adnLapFlowT203Timeouts Counter, adnLapFlowLinkResets Counter, adnLapFlowNsErrorsIns Counter, adnLapFlowNrErrorsIns Counter, adnLapFlowFrmrSent OCTET STRING, adnLapFlowFrmrReceived OCTET STRING } adnLapFlowStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAP (link access procedure) state changes, including resets." ::= { adnLapFlowEntry 2 } adnLapFlowChangeReason OBJECT-TYPE SYNTAX INTEGER { notStarted(1), abmeEntered(2), abmeReset(3), dmReceived(4), dmSent(5), discReceived(6), frmrReceived(8), frmrSent(9), n200Timeout(10), other(11) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason for the most recent incrementing of adnlapFlowStateChanges." ::= { adnLapFlowEntry 3 } adnLapFlowCurrentMode OBJECT-TYPE SYNTAX INTEGER { other(1), disconnected(2), linkSetup(3), frameReject(4), informationTransfer(6), rejFrameSent(7), waitingAcknowledgement(8), stationBusy(9), remoteStationBusy(10), bothStationsBusy(11), waitingAckStationBusy(12), waitingAckRemoteBusy(13), waitingAckBothBusy(14), rejFrameSentRemoteBusy(15), xidFrameSent(16), error(17) } ACCESS read-only STATUS mandatory DESCRIPTION "The current condition of the session." ::= { adnLapFlowEntry 4 } adnLapFlowBusyDefers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR (receive not ready) from the remote device, the lack of valid sequence number space (window saturation), or other conditions." ::= { adnLapFlowEntry 5 } adnLapFlowRejOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of REJ (reject) frames sent by this station." ::= { adnLapFlowEntry 6 } adnLapFlowRejInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of REJ (reject) frames received by this station." ::= { adnLapFlowEntry 7 } adnLapFlowT200Timeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a transmission was resent because the T200 timer expired." ::= { adnLapFlowEntry 8 } adnLapFlowT203Timeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a transmission was resent because the T203 timer expired." ::= { adnLapFlowEntry 9 } adnLapFlowLinkResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a SABME (set asynchronous balanced mode extended) was received while this interface was in data transfer state." ::= { adnLapFlowEntry 10 } adnLapFlowNsErrorsIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Ns (send sequence number) errors that were detected on this interface while in data transfer state." ::= { adnLapFlowEntry 11 } adnLapFlowNrErrorsIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Nr (receive sequence number) errors that were detected on this interface while in data transfer state." ::= { adnLapFlowEntry 12 } adnLapFlowFrmrSent OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The information field of the FRMR (frame reject) most recently sent. If no FRMR has been sent (the normal case) or the information is not available, this will be an OCTET STRING of zero length." ::= { adnLapFlowEntry 13 } adnLapFlowFrmrReceived OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The information field of the FRMR (frame reject) most recently received. If no FRMR has been received (the normal case) or the information is not available, this will be an OCTET STRING of zero length." ::= { adnLapFlowEntry 14 } adnDs1 OBJECT IDENTIFIER ::= { adnTransmission 18 } adnDsx1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the extension of the dsx1ConfigTable described in the DS1/E1 standard MIB." ::= { adnDs1 1 } adnDsx1ConfigEntry OBJECT-TYPE SYNTAX AdnDsx1ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1 Configuration table extension." INDEX { dsx1LineIndex } ::= { adnDsx1ConfigTable 1 } AdnDsx1ConfigEntry ::= SEQUENCE { adnDsx1LineType INTEGER, adnDsx1LineLength INTEGER, adnDsx1LineStatus INTEGER (-2147483648..2147483647), adnDsx1MsAisTest INTEGER, adnDsx1MsFerfTest INTEGER, adnDsx1RemLoopbackTest INTEGER, adnDsx1LineHWStatus INTEGER (-2147483648..2147483647), adnDsx1StatType INTEGER, adnDsx1LinePerfStatus INTEGER (-2147483648..2147483647) } adnDsx1LineType OBJECT-TYPE SYNTAX INTEGER { noQual(1), dsx1E1Unframed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The field is used to qualify the dsx1LineType. noQual - No qualification. e1Unframed - E1 with no framing" ::= { adnDsx1ConfigEntry 1 } adnDsx1LineLength OBJECT-TYPE SYNTAX INTEGER -- UNITS meters ACCESS read-only STATUS mandatory DESCRIPTION "The length of the DS1 line in meters. This object provides information for line build out circuitry if it exists and can profitably use the information. Accuracy should be within 30 meters. For many short lines and for lines that cannot use this information, the value zero is appropriate. Line build out circuitry sets electrical power levels in the transmitter, and sensitivity in the receiver. The line length means the distance to the nearest electrical regeneration point (which could be a simple repeater, or a CSU or DACS/multiplexer, or even a direct connection to another switch, etc. There is a possibility of increased noise (or even total signal loss) if the length is not set properly." ::= { adnDsx1ConfigEntry 2 } adnDsx1LineStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the line interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnDsx1NoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 noAlarm . No alarm present 21 2 HBERError . High bit error rate (HBER) 23 4 RLBError . Loopback requested by the remote equipment 30 8 LCMAError . Loss of CRC multiframe alignment Common Name: Line Status" ::= { adnDsx1ConfigEntry 3 } adnDsx1MsAisTest OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to send a constant alarm indication signal (AIS) to the remote equipment. This object is used only for testing and debugging. This object is available for ATM T1/E1 only. Common Name: Forcing a Line Alarm Indication Signal" ::= { adnDsx1ConfigEntry 4 } adnDsx1MsFerfTest OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to send a constant yellow alarm signal at the frame level to the remote equipment. This object is used only for testing and debugging. This object is available for ATM T1/E1 only. Common Name: Forcing a Line FERF Signal" ::= { adnDsx1ConfigEntry 5 } adnDsx1RemLoopbackTest OBJECT-TYPE SYNTAX INTEGER { lineNoLoop(1), lineLoop(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to force a loopback of the line of the remote equipment" ::= { adnDsx1ConfigEntry 6 } adnDsx1LineHWStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnDsx1LineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are: 1 lineHWNoDefect 2 BGPHT chip failure 4 not used 8 CBD chip failure on line side 8 framer chip failure on the input side 16 framer chip failure on line side" ::= { adnDsx1ConfigEntry 7 } adnDsx1StatType OBJECT-TYPE SYNTAX INTEGER { noStatistics(1), ansi(2), itu(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The field displays the standard used for computing the statistics counters. noStatistics : no statistics are available on the ds1/E1 interface ansi : ANSI T1.231 statistics are activated itu : ITU G.826 statistics are activated" ::= { adnDsx1ConfigEntry 8 } adnDsx1LinePerfStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple status simultaneously. - The NoDefect bit should be set only if no other bit is set. - The UnavailablePeriod indicates that the interface has entered an unavailable period. - The CurrentCrossingThreshold bit indicates that one of the current statistics counter has reached its threshold. - The DayIntervalCrossingThreshold bit indicates that one of the Day Interval statistics counter has reached its threshold. The bit positions are: 1 noDefect 2 unavailablePeriod 4 currentCrossingThreshold 8 dayIntervalCrossingThreshold" ::= { adnDsx1ConfigEntry 9 } adnDsx1CounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1CounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS1/E1 ADN Counter table." ::= { adnDs1 2 } adnDsx1CounterEntry OBJECT-TYPE SYNTAX AdnDsx1CounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1/E1 ADN Counter table ." INDEX { dsx1LineIndex } ::= { adnDsx1CounterTable 1 } AdnDsx1CounterEntry ::= SEQUENCE { adnDsx1LosCounter Counter, adnDsx1AisCounter Counter, adnDsx1FerfCounter Counter, adnDsx1FeCounter Counter, adnDsx1LofCounter Counter, adnDsx1FebeCounter Counter, adnDsx1PcvCounter Counter, adnDsx1Ts16AisCounter Counter, adnDsx1RsaCounter Counter, adnDsx1LsmaCounter Counter, adnDsx1LcvCounter Counter, adnDsx1LcmaCounter Counter, adnDsx1SefCounter Counter, adnDsx1ExzCounter Counter } adnDsx1LosCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-signal (LOS). Counter #0 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces." ::= { adnDsx1CounterEntry 1 } adnDsx1AisCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of alarm indication signal (AIS). Counter #2 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces." ::= { adnDsx1CounterEntry 2 } adnDsx1FerfCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of far end received failure (FERF) received from the remote equipment. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #3 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-Framed interfaces." ::= { adnDsx1CounterEntry 3 } adnDsx1FeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frame bit errors (FE). Counter #5 of the ATM core, only available on ATM-E1, CES-T1 and CES-E1-Framed interfaces." ::= { adnDsx1CounterEntry 4 } adnDsx1LofCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-frame (LOF). Counter #7 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-Framed interfaces." ::= { adnDsx1CounterEntry 5 } adnDsx1FebeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of far end block errors (FEBE). Counter #9 of the ATM core, only available on ATM-E1 and CES-E1-CRC interfaces." ::= { adnDsx1CounterEntry 6 } adnDsx1PcvCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Path Coding Violation (PCV) Error Event. A Path Coding Violation error event is : - a frame synchronization bit error in the T1-SF and E1 no CRC formats, - a CRC-6 error in the T1-ESF format, - a CRC-4 error in the E1 CRC formats. Counter #11 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1-CRC interfaces." ::= { adnDsx1CounterEntry 7 } adnDsx1Ts16AisCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of Alarm Indication Signal in time slot 16 signalling channel (TS16AIS). Counter #17 of the ATM core, only available on CES-E1-Multiframed interfaces." ::= { adnDsx1CounterEntry 8 } adnDsx1RsaCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of Remote Signalling Multiframe Alarm (RSA). Counter #18 of the ATM core, only available on CES-E1-Multiframed interfaces." ::= { adnDsx1CounterEntry 9 } adnDsx1LsmaCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of Loss of Signalling Multiframe Alignment (LSMA). Counter #19 of the ATM core, only available on CES-E1-Multiframed interfaces." ::= { adnDsx1CounterEntry 10 } adnDsx1LcvCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Line Code Violations (LCV). Counter #21 of the ATM core, only available on ATM-T1, ATM-E1, CES-T1 and CES-E1 interfaces." ::= { adnDsx1CounterEntry 11 } adnDsx1LcmaCounter OBJECT-TYPE SYNTAX Counter -- UNITS millisecond ACCESS read-only STATUS mandatory DESCRIPTION "Duration of Loss of CRC Multiframe Alignment (LCMA). Counter #30 of the ATM core, only available on CES-E1-CRC interfaces." ::= { adnDsx1CounterEntry 12 } adnDsx1SefCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Severely Errored Frames (SEF). Counter #30 of the ATM core, only available on CES-T1 interfaces." ::= { adnDsx1CounterEntry 13 } adnDsx1ExzCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of excessive zeros (EXZ). Counter #31 of the ATM core, only available on ATM-T1 and CES-T1 interfaces." ::= { adnDsx1CounterEntry 14 } adnDsx1CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Current table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231." ::= { adnDs1 3 } adnDsx1CurrentEntry OBJECT-TYPE SYNTAX AdnDsx1CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS1/E1 Current table." INDEX { dsx1LineIndex } ::= { adnDsx1CurrentTable 1 } AdnDsx1CurrentEntry ::= SEQUENCE { adnDsx1CurrentLSESs Gauge, adnDsx1CurrentLLOSSs Gauge, adnDsx1CurrentAESs Gauge, adnDsx1CurrentAISSs Gauge } adnDsx1CurrentLSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of Severely errored seconds (SES-L) at line level encountered during the current 15-minute interval. Common Name: Severely Errored Seconds" ::= { adnDsx1CurrentEntry 1 } adnDsx1CurrentLLOSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more LOS defects (LOSS-L) encountered during the current 15-minute interval. Common Name: LOS Seconds" ::= { adnDsx1CurrentEntry 2 } adnDsx1CurrentAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA-P) encountered during the current 15-minute interval. Common Name: Errored Seconds of type A" ::= { adnDsx1CurrentEntry 3 } adnDsx1CurrentAISSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during the current 15-minute interval. Common Name: AIS Seconds" ::= { adnDsx1CurrentEntry 4 } adnDsx1IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Interval table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231." ::= { adnDs1 4 } adnDsx1IntervalEntry OBJECT-TYPE SYNTAX AdnDsx1IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS1/E1 Interval table." INDEX { dsx1LineIndex, adnDsx1IntervalNumber } ::= { adnDsx1IntervalTable 1 } AdnDsx1IntervalEntry ::= SEQUENCE { adnDsx1IntervalNumber INTEGER (-2147483648..2147483647), adnDsx1IntervalLSESs Gauge, adnDsx1IntervalLLOSSs Gauge, adnDsx1IntervalAESs Gauge, adnDsx1IntervalAISSs Gauge } adnDsx1IntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnDsx1IntervalEntry 1 } adnDsx1IntervalLSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of Severely errored seconds (SES-L) at line level encountered during a particular 15-minute interval." ::= { adnDsx1IntervalEntry 2 } adnDsx1IntervalLLOSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more LOS defects (LOSS-L) encountered during a particular 15-minute interval." ::= { adnDsx1IntervalEntry 3 } adnDsx1IntervalAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA-P) encountered during a particular 15-minute interval." ::= { adnDsx1IntervalEntry 4 } adnDsx1IntervalAISSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during a particular 15-minute interval." ::= { adnDsx1IntervalEntry 5 } adnDsx1DayIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1DayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Day Interval table. This table is supported by CES-T1 interfaces. This table refers to ANSI T1.231." ::= { adnDs1 5 } adnDsx1DayIntervalEntry OBJECT-TYPE SYNTAX AdnDsx1DayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS1/E1 Day Interval table." INDEX { dsx1LineIndex } ::= { adnDsx1DayIntervalTable 1 } AdnDsx1DayIntervalEntry ::= SEQUENCE { adnDsx1DayIntervalESs Gauge, adnDsx1DayIntervalSESs Gauge, adnDsx1DayIntervalSEFSs Gauge, adnDsx1DayIntervalUASs Gauge, adnDsx1DayIntervalCSSs Gauge, adnDsx1DayIntervalPCVs Gauge, adnDsx1DayIntervalLESs Gauge, adnDsx1DayIntervalBESs Gauge, adnDsx1DayIntervalLCVs Gauge, adnDsx1DayIntervalLSESs Gauge, adnDsx1DayIntervalLLOSSs Gauge, adnDsx1DayIntervalAESs Gauge, adnDsx1DayIntervalAISSs Gauge } adnDsx1DayIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Errored Seconds (ES) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 1 } adnDsx1DayIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Seconds (SES) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 2 } adnDsx1DayIntervalSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Severely Errored Framing Seconds (SEFS) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 3 } adnDsx1DayIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Unavailable Seconds (UAS) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 4 } adnDsx1DayIntervalCSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Controlled Slip Seconds (CSS) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 5 } adnDsx1DayIntervalPCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Path Coding Violations (PCV) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 6 } adnDsx1DayIntervalLESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Line Errored Seconds (LES) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 7 } adnDsx1DayIntervalBESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 8 } adnDsx1DayIntervalLCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 9 } adnDsx1DayIntervalLSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of Severely errored seconds (SES-L) at line level encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 10 } adnDsx1DayIntervalLLOSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more LOS defects (LOSS-L) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 11 } adnDsx1DayIntervalAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA-P) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 12 } adnDsx1DayIntervalAISSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of seconds containing one or more AIS defects at path level (AISS-P) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1DayIntervalEntry 13 } adnDsx1FarEndCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1FarEndCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Far End Current table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231." ::= { adnDs1 6 } adnDsx1FarEndCurrentEntry OBJECT-TYPE SYNTAX AdnDsx1FarEndCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN Far End DS1/E1 Current table." INDEX { dsx1LineIndex } ::= { adnDsx1FarEndCurrentTable 1 } AdnDsx1FarEndCurrentEntry ::= SEQUENCE { adnDsx1FarEndCurrentAESs Gauge } adnDsx1FarEndCurrentAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current 15-minute interval. Common Name: Errored Seconds of type A" ::= { adnDsx1FarEndCurrentEntry 1 } adnDsx1FarEndIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1FarEndIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Far End Interval table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231." ::= { adnDs1 7 } adnDsx1FarEndIntervalEntry OBJECT-TYPE SYNTAX AdnDsx1FarEndIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN Far End DS1/E1 Interval table." INDEX { dsx1LineIndex, adnDsx1FarEndIntervalNumber } ::= { adnDsx1FarEndIntervalTable 1 } AdnDsx1FarEndIntervalEntry ::= SEQUENCE { adnDsx1FarEndIntervalNumber INTEGER (-2147483648..2147483647), adnDsx1FarEndIntervalAESs Gauge } adnDsx1FarEndIntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnDsx1FarEndIntervalEntry 1 } adnDsx1FarEndIntervalAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current 15-minute interval. Common Name: Errored Seconds of type A" ::= { adnDsx1FarEndIntervalEntry 2 } adnDsx1FarEndDayIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1FarEndDayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Far End Day Interval table. This table is supported by CES-T1-ESF interfaces. This table refers to ANSI T1.231." ::= { adnDs1 8 } adnDsx1FarEndDayIntervalEntry OBJECT-TYPE SYNTAX AdnDsx1FarEndDayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN Far End DS1/E1 Day Interval table." INDEX { dsx1LineIndex } ::= { adnDsx1FarEndDayIntervalTable 1 } AdnDsx1FarEndDayIntervalEntry ::= SEQUENCE { adnDsx1FarEndDayIntervalESs Gauge, adnDsx1FarEndDayIntervalSESs Gauge, adnDsx1FarEndDayIntervalSEFSs Gauge, adnDsx1FarEndDayIntervalUASs Gauge, adnDsx1FarEndDayIntervalCSSs Gauge, adnDsx1FarEndDayIntervalPCVs Gauge, adnDsx1FarEndDayIntervalLESs Gauge, adnDsx1FarEndDayIntervalBESs Gauge, adnDsx1FarEndDayIntervalAESs Gauge } adnDsx1FarEndDayIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Errored Seconds (ES) encoun- tered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 1 } adnDsx1FarEndDayIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Severely Errored Seconds (SES) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 2 } adnDsx1FarEndDayIntervalSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Severely Errored Framing Seconds (SEFS) encountered by a DS1 interface in the cuurent day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 3 } adnDsx1FarEndDayIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Unavailable Seconds (UAS) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 4 } adnDsx1FarEndDayIntervalCSSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Controlled Slip Seconds (CSS) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 5 } adnDsx1FarEndDayIntervalPCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Path Coding Violations (PCV) reported via the far end block error count en- countered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 6 } adnDsx1FarEndDayIntervalLESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Far End Line Errored Seconds (LES) en- countered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 7 } adnDsx1FarEndDayIntervalBESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 8 } adnDsx1FarEndDayIntervalAESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds of type A at path level (ESA) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnDsx1FarEndDayIntervalEntry 9 } adnDsx1ItuCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1ItuCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Current Itu table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826." ::= { adnDs1 9 } adnDsx1ItuCurrentEntry OBJECT-TYPE SYNTAX AdnDsx1ItuCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS1/E1 Current Itu table." INDEX { dsx1LineIndex } ::= { adnDsx1ItuCurrentTable 1 } AdnDsx1ItuCurrentEntry ::= SEQUENCE { adnDsx1ItuCurrentESs Gauge, adnDsx1ItuCurrentSESs Gauge, adnDsx1ItuCurrentBBEs Gauge, adnDsx1ItuFarEndCurrentESs Gauge, adnDsx1ItuFarEndCurrentSESs Gauge, adnDsx1ItuFarEndCurrentBBEs Gauge, adnDsx1ItuCurrentUASs Gauge } adnDsx1ItuCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current 15-minute interval. Common Name: Errored Seconds" ::= { adnDsx1ItuCurrentEntry 1 } adnDsx1ItuCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current 15-minute interval. Common Name: Severely Errored Seconds" ::= { adnDsx1ItuCurrentEntry 2 } adnDsx1ItuCurrentBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current 15-minute interval. Common Name: Background Errored Blocks" ::= { adnDsx1ItuCurrentEntry 3 } adnDsx1ItuFarEndCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Errored Seconds" ::= { adnDsx1ItuCurrentEntry 4 } adnDsx1ItuFarEndCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Severely Errored Seconds" ::= { adnDsx1ItuCurrentEntry 5 } adnDsx1ItuFarEndCurrentBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Background Errored Blocks" ::= { adnDsx1ItuCurrentEntry 6 } adnDsx1ItuCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of unavailable seconds (UAS) encountered during the current 15-minute interval. Common Name: Unavailable Time" ::= { adnDsx1ItuCurrentEntry 7 } adnDsx1ItuIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1ItuIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Itu Interval table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826." ::= { adnDs1 10 } adnDsx1ItuIntervalEntry OBJECT-TYPE SYNTAX AdnDsx1ItuIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS1/E1 Interval Itu table." INDEX { dsx1LineIndex, adnDsx1ItuIntervalNumber } ::= { adnDsx1ItuIntervalTable 1 } AdnDsx1ItuIntervalEntry ::= SEQUENCE { adnDsx1ItuIntervalNumber INTEGER (-2147483648..2147483647), adnDsx1ItuIntervalESs Gauge, adnDsx1ItuIntervalSESs Gauge, adnDsx1ItuIntervalBBEs Gauge, adnDsx1ItuFarEndIntervalESs Gauge, adnDsx1ItuFarEndIntervalSESs Gauge, adnDsx1ItuFarEndIntervalBBEs Gauge, adnDsx1ItuIntervalUASs Gauge } adnDsx1ItuIntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnDsx1ItuIntervalEntry 1 } adnDsx1ItuIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 2 } adnDsx1ItuIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 3 } adnDsx1ItuIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 4 } adnDsx1ItuFarEndIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 5 } adnDsx1ItuFarEndIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 6 } adnDsx1ItuFarEndIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 7 } adnDsx1ItuIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered in a particular 15-minute interval." ::= { adnDsx1ItuIntervalEntry 8 } adnDsx1ItuDayIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnDsx1ItuDayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS1/E1 Itu Day Interval table. This table is supported by CES-E1 interfaces. This table refers to ITU G.826." ::= { adnDs1 11 } adnDsx1ItuDayIntervalEntry OBJECT-TYPE SYNTAX AdnDsx1ItuDayIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS1/E1 Day Itu table." INDEX { dsx1LineIndex } ::= { adnDsx1ItuDayIntervalTable 1 } AdnDsx1ItuDayIntervalEntry ::= SEQUENCE { adnDsx1ItuDayIntervalESs Gauge, adnDsx1ItuDayIntervalSESs Gauge, adnDsx1ItuDayIntervalBBEs Gauge, adnDsx1ItuFarEndDayIntervalESs Gauge, adnDsx1ItuFarEndDayIntervalSESs Gauge, adnDsx1ItuFarEndDayIntervalBBEs Gauge, adnDsx1ItuDayIntervalUASs Gauge } adnDsx1ItuDayIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 1 } adnDsx1ItuDayIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 2 } adnDsx1ItuDayIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 3 } adnDsx1ItuFarEndDayIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 4 } adnDsx1ItuFarEndDayIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 5 } adnDsx1ItuFarEndDayIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 6 } adnDsx1ItuDayIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time)." ::= { adnDsx1ItuDayIntervalEntry 7 } adnDs3e3 OBJECT IDENTIFIER ::= { adnTransmission 30 } adnX3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the extension of the dsx3ConfigTable described in the DS3/E3 standard MIB." ::= { adnDs3e3 1 } adnX3ConfigEntry OBJECT-TYPE SYNTAX AdnX3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Configuration table extension." INDEX { dsx3LineIndex } ::= { adnX3ConfigTable 1 } AdnX3ConfigEntry ::= SEQUENCE { adnX3MsferfTest INTEGER, adnX3PathferfTest INTEGER, adnX3AisTest INTEGER, adnX3Scramblerconfig INTEGER, adnX3IdleCellFillingconfig INTEGER, adnX3LineStatus INTEGER (-2147483648..2147483647), adnX3LinePerfStatus INTEGER (-2147483648..2147483647), adnX3LineHWStatus INTEGER (-2147483648..2147483647) } adnX3MsferfTest OBJECT-TYPE SYNTAX INTEGER { adnX3LineFerfOn(1), adnX3LineFerfOff(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to send a constant yellow alarm signal at the frame level to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Line FERF Signal" ::= { adnX3ConfigEntry 1 } adnX3PathferfTest OBJECT-TYPE SYNTAX INTEGER { adnX3PathFerfOn(1), adnX3PathFerfOff(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to send a constant yellow alarm signal at the path level to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Path FERF Signal" ::= { adnX3ConfigEntry 2 } adnX3AisTest OBJECT-TYPE SYNTAX INTEGER { adnX3LineAisOn(1), adnX3LineAisOff(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to send a constant alarm indication signal (AIS) to the remote equipment. This object is used only for testing and debugging. Common Name: Forcing a Line Alarm Indication Signal" ::= { adnX3ConfigEntry 3 } adnX3Scramblerconfig OBJECT-TYPE SYNTAX INTEGER { adnX3ScramblerOn(1), adnX3ScramblerOff(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Defines if the DS3 Physical Layer Convergence Protocol (PLCP) scrambler is active or not. Common Name: D3 Scrambler" ::= { adnX3ConfigEntry 4 } adnX3IdleCellFillingconfig OBJECT-TYPE SYNTAX INTEGER { adnX3UnassignedCell(1), adnX3IdleCell(2) } ACCESS read-write STATUS obsolete DESCRIPTION "The type of cell rate decoupling (CRD) mode selected for the line: - unassigned cells, according to ATM Forum standard - idle cells, according to ITU standart. Common Name: Inserted Cell Type" ::= { adnX3ConfigEntry 5 } adnX3LineStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the line interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnX3NoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 adnX3NoAlarm . No alarm present 10 2 adnX3RcvRAIFailure . Receiving yellow/remote alarm (RAI) . indication . 4 adnX3reserved . Not used 2 8 adndsx3RcvAIS . Receiving alarm indication signals . (AIS) . 16 adnX3reserved . Not used 7 32 adnX3LOF . Receiving loss-of-frame (LOF) . signals 0 64 adnX3LOS . Receiving loss-of-signal (LOS) . 128 adnX3LoopbackState . Looping the received signal . 256 adnX3reserved . Not used 3 512 adnX3RcvFerfAlarm . Receiving Far End Receive Failures . (FERF) DS3 yellow alarm 4 1024 adnX3PbitError . P-bit parity error counter threshold . reached 5 2048 adnX3CbitError . C-bit parity error counter threshold . reached 6 4096 adnX3FEBEError . Far end block errors (FEBE) counter . threshold reached 9 8192 adnX3FEBEError -- obsolete -- . FEBE Physical Layer Convergence . Protocol (PLCP) counter threshold . reached 11 16384 adnX3BIP8Error -- obsolete -- . 8-bits interleaved parity (BIP-8) . counter threshold reached 12 32768 adnX3LOFPlcpError . LOF DS3 PLCP counter threshold . reached 16 65536 adnX3LOCDError . Loss-of-cell-delineation (LOCD) . counter threshold reached 17 131072 adnX3HECCorrected . Corrected Header Error Control (HEC) . counter threshold reached 18 262144 adnX3HECUncorrected . Uncorrected HEC counter threshold . reached 20 524288 adnX3OOFPlcpError -- obsolete -- . Out-of-frame (OOF) PLCP counter . threshold reached 21 1048576 adnX3LCVError -- obsolete -- . Line code violation (LCV) counter . threshold reached 22 2097152 adnX3UpwardsFIFO . Upwards cell buffer overflow 26 4194304 adnX3DownwardsFIFO -- obsolete -- . Downwards cell buffer overflow 28 8388608 adnX3IdleCode . Idle Code counter threshold reached 29 16777216 adnX3OOFError . OOF counter threshold reached 30 33554432 adnX3HBERError -- obsolete -- . High bit error rate (HBER) counter . threshold reached 31 67108864 adnX3ChangeMode . Change Mode counter threshold reached Common Name: Line Status" ::= { adnX3ConfigEntry 6 } adnX3LinePerfStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple status simultaneously. The adnX3NoDefect bit should be set only if no other bit is set. The adnX3UnavailablePeriod indicates that the interface has entered an unavailable period. Each CrossingThreshold bit indicates that the corresponding performance counter has reached its threshold. The bit positions are: 1 adnX3NoDefect 2 adnX3UnavailablePeriod 4 adnX3CurrentCrossingThresholdESs 8 adnX3CurrentCrossingThresholdSESs 16 adnX3CurrentCrossingThresholdBBEs 32 adnX3CurrentCrossingThresholdFarEndESs 64 adnX3CurrentCrossingThresholdFarEndSESs 128 adnX3CurrentCrossingThresholdFarEndBBEs 256 adnX3CurrentCrossingThresholdUASs 512 adnX3DayCrossingThresholdESs 1024 adnX3DayCrossingThresholdSESs 2048 adnX3DayCrossingThresholdBBEs 4096 adnX3DayCrossingThresholdFarEndESs 8192 adnX3DayCrossingThresholdFarEndSESs 16384 adnX3DayCrossingThresholdFarEndBBEs 32768 adnX3DayCrossingThresholdUASs " ::= { adnX3ConfigEntry 7 } adnX3LineHWStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnX3LineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are: (BBT3B, BBT3B2, BBT3B3, or BBT3B4 boards): 1 adnX3LineHWNoDefect 2 BGPHT chip failure 4 BGP45 chip failure on line side 8 DS3 PLPP chip failure on line side 16 Applique failure (BBE3B, or BBE3B3 boards): 1 adnX3LineHWNoDefect 2 BGPHT chip failure 4 not used 8 BGP43 chip failure on line side 16 MRT chip failure (BBTP3C board with HATT3C applique): 1 adnX3LineHWNoDefect 2 not used 4 not used 8 PM7346 chip failure on line side 16 applique failure (BBTP3C board with HATE3C applique): 1 adnX3LineHWNoDefect 2 not used 4 BGP45 chip failure on line side 8 PM7346 chip failure on line side 16 applique failure" ::= { adnX3ConfigEntry 8 } adnX3CounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3CounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 ADN Counter table." ::= { adnDs3e3 2 } adnX3CounterEntry OBJECT-TYPE SYNTAX AdnX3CounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 ADN Counter table." INDEX { dsx3LineIndex } ::= { adnX3CounterTable 1 } AdnX3CounterEntry ::= SEQUENCE { adnX3LOSCounter Counter, adnX3AISCounter Counter, adnX3YellowAlarmCounter Counter, adnX3PBitCounter Counter, adnX3CBitCounter Counter, adnX3CBitFebeCounter Counter, adnX3LOFCounter Counter, adnX3LCVCounter Counter, adnX3FebeCounter Counter, adnX3PathferfCounter Counter, adnX3Bip8Counter Counter, adnX3OOFCounter Counter, adnX3HECCorrectedCounter Counter, adnX3HECUncorrectedCounter Counter, adnX3UpwardsFIFOCounter Counter, adnX3DownwardsFIFOCounter Counter, adnX3HBERCounter Counter, adnX3IdleCodeCounter Counter, adnX3LOCDCounter Counter, adnX3ModeChangeCounter Counter, adnX3PlcpLOFCounter Counter, adnX3PlcpOOFCounter Counter } adnX3LOSCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-signal (LOS). Counter #0 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards." ::= { adnX3CounterEntry 1 } adnX3AISCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of alarm indication signal (AIS). Counter #2 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards." ::= { adnX3CounterEntry 2 } adnX3YellowAlarmCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of far end received failure (FERF) received from the remote equipment at DS3 level. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #3 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 3 } adnX3PBitCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of P-bit parity errors. Counter #4 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 4 } adnX3CBitCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of C-bit parity errors. Counter #5 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 5 } adnX3CBitFebeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of C-bit far end block errors (FEBE). Counter #6 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 6 } adnX3LOFCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-frame (LOF). Counter #7 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards." ::= { adnX3CounterEntry 7 } adnX3LCVCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of line code violations (LCV). Counter #21 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique. Common Name: Line Code Viol" ::= { adnX3CounterEntry 8 } adnX3FebeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of far end block errors (FEBE). Counter #9 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique." ::= { adnX3CounterEntry 9 } adnX3PathferfCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of far end received failure (FERF) received from the remote equipment at path level. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #10 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique." ::= { adnX3CounterEntry 10 } adnX3Bip8Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of 8-bits interleaved parity (BIP-8) errors. Counter #11 of the ATM core, only available on BBE3Bx boards and BBTP3C board with HATE3C applique." ::= { adnX3CounterEntry 11 } adnX3OOFCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "Number of out-of-frame (OOF) errors. Counter #29 of the ATM core, only available on BBT3Bx, BBE3Bx and BBTP3C boards." ::= { adnX3CounterEntry 12 } adnX3HECCorrectedCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS obsolete DESCRIPTION "Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core, only available on BBE3B board." ::= { adnX3CounterEntry 13 } adnX3HECUncorrectedCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core, only available on BBT3B and BBE3B boards." ::= { adnX3CounterEntry 14 } adnX3UpwardsFIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of upward (from remote equipment) cell buffer overflow events, only available on BBT3B and BBE3B boards. Counter #22 of the ATM core" ::= { adnX3CounterEntry 15 } adnX3DownwardsFIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of downward (to remote equipment) cell buffer overflow events, only available on BBT3B and BBE3B boards. Counter #26 of the ATM core" ::= { adnX3CounterEntry 16 } adnX3HBERCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of high bit error rate (HBER). Counter #30 of the ATM core, only available on BBT3B board." ::= { adnX3CounterEntry 17 } adnX3IdleCodeCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of idle code reception. Counter #28 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 18 } adnX3LOCDCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of loss-of-cell-delineation (LOCD). Counter #16 of the ATM core, only available on BBT3B and BBE3B boards." ::= { adnX3CounterEntry 19 } adnX3ModeChangeCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of DS3 application mode change. Counter #31 of the ATM core, only available on BBT3Bx boards and BBTP3C board with HATT3C applique." ::= { adnX3CounterEntry 20 } adnX3PlcpLOFCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of loss-of-frame (LOF) at the Physical Layer Convergence Protocol (PLCP) level. Counter #12 of the ATM core, only available on BBT3B board." ::= { adnX3CounterEntry 21 } adnX3PlcpOOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of out-of-frame (OOF) events at the Physical Layer Convergence Protocol (PLCP) level. Counter #20 of the ATM core, only available on BBT3B board." ::= { adnX3CounterEntry 22 } adnX3CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Current table." ::= { adnDs3e3 3 } adnX3CurrentEntry OBJECT-TYPE SYNTAX AdnX3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Current table." INDEX { dsx3LineIndex } ::= { adnX3CurrentTable 1 } AdnX3CurrentEntry ::= SEQUENCE { adnX3CurrentESs Gauge, adnX3CurrentSESs Gauge, adnX3CurrentBBEs Gauge, adnX3CurrentFarEndESs Gauge, adnX3CurrentFarEndSESs Gauge, adnX3CurrentFarEndBBEs Gauge, adnX3CurrentUASs Gauge } adnX3CurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current 15-minute interval. Common Name: Errored Seconds" ::= { adnX3CurrentEntry 1 } adnX3CurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current 15-minute interval. Common Name: Severely Errored Seconds" ::= { adnX3CurrentEntry 2 } adnX3CurrentBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current 15-minute interval. Common Name: Background Errored Blocks" ::= { adnX3CurrentEntry 3 } adnX3CurrentFarEndESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Errored Seconds" ::= { adnX3CurrentEntry 4 } adnX3CurrentFarEndSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Severely Errored Seconds" ::= { adnX3CurrentEntry 5 } adnX3CurrentFarEndBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval. Common Name: Remote Background Errored Blocks" ::= { adnX3CurrentEntry 6 } adnX3CurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of unavailable seconds (UAS) encountered during the current 15-minute interval. Common Name: Unavailable Time" ::= { adnX3CurrentEntry 7 } adnX3IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Interval table." ::= { adnDs3e3 4 } adnX3IntervalEntry OBJECT-TYPE SYNTAX AdnX3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Interval table." INDEX { dsx3LineIndex, adnX3IntervalNumber } ::= { adnX3IntervalTable 1 } AdnX3IntervalEntry ::= SEQUENCE { adnX3IntervalNumber INTEGER (-2147483648..2147483647), adnX3IntervalESs Gauge, adnX3IntervalSESs Gauge, adnX3IntervalBBEs Gauge, adnX3IntervalFarEndESs Gauge, adnX3IntervalFarEndSESs Gauge, adnX3IntervalFarEndBBEs Gauge, adnX3IntervalUASs Gauge } adnX3IntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnX3IntervalEntry 1 } adnX3IntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during a particular 15-minute interval." ::= { adnX3IntervalEntry 2 } adnX3IntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during a particular 15-minute interval." ::= { adnX3IntervalEntry 3 } adnX3IntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during a particular 15-minute interval." ::= { adnX3IntervalEntry 4 } adnX3IntervalFarEndESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnX3IntervalEntry 5 } adnX3IntervalFarEndSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnX3IntervalEntry 6 } adnX3IntervalFarEndBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval." ::= { adnX3IntervalEntry 7 } adnX3IntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered in a particular 15-minute interval." ::= { adnX3IntervalEntry 8 } adnX3DayTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3DayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Day table." ::= { adnDs3e3 5 } adnX3DayEntry OBJECT-TYPE SYNTAX AdnX3DayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Day table." INDEX { dsx3LineIndex } ::= { adnX3DayTable 1 } AdnX3DayEntry ::= SEQUENCE { adnX3DayESs Gauge, adnX3DaySESs Gauge, adnX3DayBBEs Gauge, adnX3DayFarEndESs Gauge, adnX3DayFarEndSESs Gauge, adnX3DayFarEndBBEs Gauge, adnX3DayUASs Gauge } adnX3DayESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 1 } adnX3DaySESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 2 } adnX3DayBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 3 } adnX3DayFarEndESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 4 } adnX3DayFarEndSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 5 } adnX3DayFarEndBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 6 } adnX3DayUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time)." ::= { adnX3DayEntry 7 } adnX3TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnX3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3/E3 Total table." ::= { adnDs3e3 6 } adnX3TotalEntry OBJECT-TYPE SYNTAX AdnX3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3/E3 Total table." INDEX { dsx3LineIndex } ::= { adnX3TotalTable 1 } AdnX3TotalEntry ::= SEQUENCE { adnX3TotalESs Gauge, adnX3TotalSESs Gauge, adnX3TotalBBEs Gauge, adnX3TotalFarEndESs Gauge, adnX3TotalFarEndSESs Gauge, adnX3TotalFarEndBBEs Gauge, adnX3TotalUASs Gauge } adnX3TotalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the 24-hour reporting period. It is the sum of ES statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 1 } adnX3TotalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the 24-hour reporting period. It is the sum of SES statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 2 } adnX3TotalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the 24-hour reporting period. It is the sum of BBE statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 3 } adnX3TotalFarEndESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End ES statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 4 } adnX3TotalFarEndSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End SES statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 5 } adnX3TotalFarEndBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End BBE statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 6 } adnX3TotalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered during the 24-hour reporting period. It is the sum of UAS statistics for the 96 15-minute intervals." ::= { adnX3TotalEntry 7 } adnsonetMIB OBJECT IDENTIFIER ::= { adnTransmission 39 } adnsonetObjects OBJECT IDENTIFIER ::= { adnsonetMIB 1 } adnsonetObjectsPath OBJECT IDENTIFIER ::= { adnsonetMIB 2 } adnsonetObjectsTC OBJECT IDENTIFIER ::= { adnsonetMIB 3 } adnsonetObjectsITUperf OBJECT IDENTIFIER ::= { adnsonetMIB 4 } adnsonetObjectsMaintenance OBJECT IDENTIFIER ::= { adnsonetMIB 5 } adnsonetMedium OBJECT IDENTIFIER ::= { adnsonetObjects 1 } adnsonetSection OBJECT IDENTIFIER ::= { adnsonetObjects 2 } adnsonetLine OBJECT IDENTIFIER ::= { adnsonetObjects 3 } adnsonetPath OBJECT IDENTIFIER ::= { adnsonetObjectsPath 1 } adnsonetTC OBJECT IDENTIFIER ::= { adnsonetObjectsTC 1 } adnsonetITUperf OBJECT IDENTIFIER ::= { adnsonetObjectsITUperf 1 } adnsonetFarEndITUperf OBJECT IDENTIFIER ::= { adnsonetObjectsITUperf 2 } adnsonetMaintenance OBJECT IDENTIFIER ::= { adnsonetObjectsMaintenance 1 } adnsonetMediumTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetMediumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Medium table." ::= { adnsonetMedium 1 } adnsonetMediumEntry OBJECT-TYPE SYNTAX AdnSonetMediumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Medium table." INDEX { ifIndex } ::= { adnsonetMediumTable 1 } AdnSonetMediumEntry ::= SEQUENCE { adnsonetMediumStatus INTEGER (-2147483648..2147483647), adnsonetMediumLaserDegradation Counter, adnsonetMediumLaserTransmitSignalOut Counter, adnsonetMediumAppliqueFailure Counter, adnsonetMediumConfigLineClockMode INTEGER, adnsonetMediumConfigLaserPower INTEGER } adnsonetMediumStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetMediumNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetMediumNoDefect 2 adnsonetMediumLaserDegradation 4 adnsonetMediumLaserTransmitSignalOut 8 adnsonetMediumAppliqueFailure (obsolete) Common Name: Medium State" ::= { adnsonetMediumEntry 1 } adnsonetMediumLaserDegradation OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of laser degradation. Counter #23 of the ATM core, only available on BBS1Bx board with HAS1B applique and on BBTS1C board." ::= { adnsonetMediumEntry 2 } adnsonetMediumLaserTransmitSignalOut OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of transmit signal out of range. Counter #24 of the ATM core, only available on BBS1Bx board with HAS1B applique and on BBTS1C board." ::= { adnsonetMediumEntry 3 } adnsonetMediumAppliqueFailure OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of applique board failure. Counter #27 of the ATM core." ::= { adnsonetMediumEntry 4 } adnsonetMediumConfigLineClockMode OBJECT-TYPE SYNTAX INTEGER { adnsonetMediumLocalTiming(1), adnsonetMediumLoopTiming(2), adnsonetMediumThroughTiming(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The transmit clock mode of the line: - local timing: the transmit clock is generated by the local board, - loop timing: the transmit clock is the one received from the remote equipment, - through timing: the transmit clock is derived from the recovered receive clock of another interface of the HSS. Common Name: Transmit Clock Mode" ::= { adnsonetMediumEntry 5 } adnsonetMediumConfigLaserPower OBJECT-TYPE SYNTAX INTEGER { adnsonetMediumLaserON(1), adnsonetMediumLaserOFF(2), adnsonetMediumLaserNS(3), adnsonetMediumLaserONALS(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of the laser LED on the applique: - LaserON: laser LED in service with automatic laser shutdown (ALS) function disabled, - LaserOFF: laser LED out of service, - LaserNS: laser LED not supported by the applique, - LaserONALS: laser LED in service with ALS function enabled. Common Name: Laser Power" ::= { adnsonetMediumEntry 6 } adnsonetSectionTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetSectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Section Current table." ::= { adnsonetSection 1 } adnsonetSectionEntry OBJECT-TYPE SYNTAX AdnSonetSectionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Section Current table." INDEX { ifIndex } ::= { adnsonetSectionTable 1 } AdnSonetSectionEntry ::= SEQUENCE { adnsonetSectionStatus INTEGER (-2147483648..2147483647), adnsonetSectionLOS Counter, adnsonetSectionLOF Counter, adnsonetSectionOOF Counter } adnsonetSectionStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetSectionNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetSectionNoDefect 2 adnsonetSectionLOS 4 adnsonetSectionLOF 8 adnsonetSectionOOF Common Name: Section State" ::= { adnsonetSectionEntry 1 } adnsonetSectionLOS OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-signal (LOS). Counter #0 of the ATM core." ::= { adnsonetSectionEntry 2 } adnsonetSectionLOF OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-frame (LOF). Counter #7 of the ATM core." ::= { adnsonetSectionEntry 3 } adnsonetSectionOOF OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of out-of-frame (OOF) events. Counter #29 of the ATM core." ::= { adnsonetSectionEntry 4 } adnsonetLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Line Current table." ::= { adnsonetLine 1 } adnsonetLineEntry OBJECT-TYPE SYNTAX AdnSonetLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Line Current table." INDEX { ifIndex } ::= { adnsonetLineTable 1 } AdnSonetLineEntry ::= SEQUENCE { adnsonetLineStatus INTEGER (-2147483648..2147483647), adnsonetLineAIS Counter, adnsonetLineRcvRDI Counter, adnsonetLineBIP Counter, adnsonetLineConfigLoopback INTEGER, adnsonetLineConfigRDI INTEGER, adnsonetLineConfigAIS INTEGER } adnsonetLineStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetLineNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetLineNoDefect 2 adnsonetLineAIS 4 adnsonetLineRDI 8 adnsonetLineBIP 16 adnsonetLineHighBIP Common Name: Line State" ::= { adnsonetLineEntry 1 } adnsonetLineAIS OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of alarm indication signal (AIS). Counter #2 of the ATM core." ::= { adnsonetLineEntry 2 } adnsonetLineRcvRDI OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of remote defect indication (RDI) received from the remote equipement. For a Synchronous Digital Hierarchy (SDH) line, the RDI signal is known as Multiplexing Section Far End Receive Failure (MS-FERF). Counter #3 of the ATM core." ::= { adnsonetLineEntry 3 } adnsonetLineBIP OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of 24-bit interleaved parity (BIP-24) errors for STS-3c or STM-1. Number of 96-bit interleaved parity (BIP-96) errors for STS-12c or STM-4. Counter #28 of the ATM core." ::= { adnsonetLineEntry 4 } adnsonetLineConfigLoopback OBJECT-TYPE SYNTAX INTEGER { adnsonetLineLoopbackON(1), adnsonetLineLoopbackOFF(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if line loopback is activated or deactivated. When activated, received frames are retransmitted on the line. Common Name: Line Loopback" ::= { adnsonetLineEntry 5 } adnsonetLineConfigRDI OBJECT-TYPE SYNTAX INTEGER { adnsonetLineRDION(1), adnsonetLineRDIOFF(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if a permanent remote defect indication (RDI) or Far End Receive Failure (FERF) is sent on the line. It is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Line Remote Defect Indication" ::= { adnsonetLineEntry 6 } adnsonetLineConfigAIS OBJECT-TYPE SYNTAX INTEGER { adnsonetLineAISON(1), adnsonetLineAISOFF(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if a permanent alarm indication signal (AIS) can be sent on the line. For STM-1 interfaces, this option can't be activated (AIS off). For STS-3c, STS-12c, and STM-4 interfaces, this option can be activated (AIS off or AIS on). It is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Line Alarm Indication Signal" ::= { adnsonetLineEntry 7 } adnsonetPathTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Path Current table." ::= { adnsonetPath 1 } adnsonetPathEntry OBJECT-TYPE SYNTAX AdnSonetPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Path Current table." INDEX { ifIndex } ::= { adnsonetPathTable 1 } AdnSonetPathEntry ::= SEQUENCE { adnsonetPathWidth INTEGER, adnsonetPathStatus INTEGER (-2147483648..2147483647), adnsonetPathLOP Counter, adnsonetPathAIS Counter, adnsonetPathRcvRDI Counter, adnsonetPathBIP8 Counter, adnsonetPathFEBE Counter, adnsonetPathConfigRDI INTEGER, adnsonetPathConfigAIS INTEGER } adnsonetPathWidth OBJECT-TYPE SYNTAX INTEGER { sts3cSTM1(1), sts12cSTM4(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) path." ::= { adnsonetPathEntry 1 } adnsonetPathStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetPathNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetLineNoDefect 2 adnsonetPathSTSLOP 4 adnsonetPathSTSAIS 8 adnsonetPathSTSRDI 16 adnsonetPathUnequipped * 32 adnsonetPathSignalLabelMismatch * 64 adnsonetPathBIP8 128 adnsonetPathFEBE * not provided by HSS, but the value is required to ensure compatibility with the RFC sonetPathStatus." ::= { adnsonetPathEntry 2 } adnsonetPathLOP OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-pointer (LOP). Counter #12 of the ATM core." ::= { adnsonetPathEntry 3 } adnsonetPathAIS OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of alarm indication signal (AIS) at path level. Counter #8 of the ATM core." ::= { adnsonetPathEntry 4 } adnsonetPathRcvRDI OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of remote defect indication (RDI) received from the remote equipment at path level. For Synchronous Digital Hierarchy (SDH), this signal is known as a path Far End Receive Failure (FERF) event. Counter #10 of the ATM core." ::= { adnsonetPathEntry 5 } adnsonetPathBIP8 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of 8-bit interleaved parity (BIP-8) errors. Counter #11 of the ATM core." ::= { adnsonetPathEntry 6 } adnsonetPathFEBE OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of far end block errors (FEBE) received from the remote equipment at path level. Counter #9 of the ATM core." ::= { adnsonetPathEntry 7 } adnsonetPathConfigRDI OBJECT-TYPE SYNTAX INTEGER { adnsonetPathRDION(1), adnsonetPathRDIOFF(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if a permanent remote defect indication (RDI) is sent on the path. For Synchronous Digital Hierarchy (SDH), it indicates if a permanent Far End Receive Failure (FERF) can be sent on the path. This is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Path Remote Defect Indication" ::= { adnsonetPathEntry 8 } adnsonetPathConfigAIS OBJECT-TYPE SYNTAX INTEGER { adnsonetPathAISON(1), adnsonetPathAISOFF(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if a permanent alarm indication signal (AIS) is sent on the path. This is a configuration option that should be used only for maintenance purposes. Common Name: Forcing a Path Alarm Indication Signal" ::= { adnsonetPathEntry 9 } adnsonetTCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetTCEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "The ADN SONET/SDH Transmission Convergence (TC) Current table." ::= { adnsonetTC 1 } adnsonetTCEntry OBJECT-TYPE SYNTAX AdnSonetTCEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the ADN SONET/SDH Transmission Convergence (TC) Current table." INDEX { ifIndex } ::= { adnsonetTCTable 1 } AdnSonetTCEntry ::= SEQUENCE { adnsonetTCStatus INTEGER (-2147483648..2147483647), adnsonetTCOCD Counter, adnsonetTCCorrectedHEC Counter, adnsonetTCUnCorrectedHEC Counter, adnsonetTCUpBufferOverflow Counter, adnsonetTCDownBufferOverflow Counter, adnsonetTCETtoLTLoss Counter, adnsonetTCConfigCRD INTEGER } adnsonetTCStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS obsolete DESCRIPTION "This variable indicates the status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetTCNoDefect bit should be set only if no other bit is set. The bit positions are: 1 adnsonetTCNoDefect 2 adnsonetTCOCD 4 adnsonetTCCorrectedHEC 8 adnsonetTCUnCorrectedHEC 16 adnsonetTCUpBufferOverflow 32 adnsonetTCDownBufferOverflow 64 adnsonetTCETtoLTLoss" ::= { adnsonetTCEntry 1 } adnsonetTCOCD OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of out-of-cell delineation (OCD). Counter #16 of the ATM core." ::= { adnsonetTCEntry 2 } adnsonetTCCorrectedHEC OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS obsolete DESCRIPTION "Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core." ::= { adnsonetTCEntry 3 } adnsonetTCUnCorrectedHEC OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS obsolete DESCRIPTION "Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core." ::= { adnsonetTCEntry 4 } adnsonetTCUpBufferOverflow OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of upward (from remote equipment) cell buffer overflow events. Counter #22 of the ATM core." ::= { adnsonetTCEntry 5 } adnsonetTCDownBufferOverflow OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of downward (to remote equipment) cell buffer overflow events. Counter #26 of the ATM core." ::= { adnsonetTCEntry 6 } adnsonetTCETtoLTLoss OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS obsolete DESCRIPTION "Duration of loss of ATM signal from exchange termination processor (ET) to linetermination processor (LT). Counter #25 of the ATM core." ::= { adnsonetTCEntry 7 } adnsonetTCConfigCRD OBJECT-TYPE SYNTAX INTEGER { adnsonetTCUnassignedCell(1), adnsonetTCIdleCell(2) } ACCESS read-write STATUS obsolete DESCRIPTION "The type of cell rate decoupling (CRD) mode selected for the line: - unassigned cells (ANSI) - idle cells (ITU). Common Name: Cell Rate Decoupling" ::= { adnsonetTCEntry 8 } adnsonetCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Current table." ::= { adnsonetITUperf 1 } adnsonetCurrentEntry OBJECT-TYPE SYNTAX AdnSonetCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Current table." INDEX { ifIndex } ::= { adnsonetCurrentTable 1 } AdnSonetCurrentEntry ::= SEQUENCE { adnsonetCurrentESs Gauge, adnsonetCurrentSESs Gauge, adnsonetCurrentBBEs Gauge, adnsonetCurrentUASs Gauge } adnsonetCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current 15-minute interval." ::= { adnsonetCurrentEntry 1 } adnsonetCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current 15-minute interval." ::= { adnsonetCurrentEntry 2 } adnsonetCurrentBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current 15-minute interval." ::= { adnsonetCurrentEntry 3 } adnsonetCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of unavailable seconds (UAS) encountered during the current 15-minute interval." ::= { adnsonetCurrentEntry 4 } adnsonetIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Interval table." ::= { adnsonetITUperf 2 } adnsonetIntervalEntry OBJECT-TYPE SYNTAX AdnSonetIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Interval table." INDEX { ifIndex, adnsonetIntervalNumber } ::= { adnsonetIntervalTable 1 } AdnSonetIntervalEntry ::= SEQUENCE { adnsonetIntervalNumber INTEGER (-2147483648..2147483647), adnsonetIntervalESs Gauge, adnsonetIntervalSESs Gauge, adnsonetIntervalBBEs Gauge, adnsonetIntervalUASs Gauge } adnsonetIntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnsonetIntervalEntry 1 } adnsonetIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during a particular 15-minute interval." ::= { adnsonetIntervalEntry 2 } adnsonetIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during a particular 15-minute interval." ::= { adnsonetIntervalEntry 3 } adnsonetIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during a particular 15-minute interval." ::= { adnsonetIntervalEntry 4 } adnsonetIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered in a particular 15-minute interval." ::= { adnsonetIntervalEntry 5 } adnsonetTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetTotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Total table." ::= { adnsonetITUperf 3 } adnsonetTotalEntry OBJECT-TYPE SYNTAX AdnSonetTotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Total table." INDEX { ifIndex } ::= { adnsonetTotalTable 1 } AdnSonetTotalEntry ::= SEQUENCE { adnsonetTotalESs Gauge, adnsonetTotalSESs Gauge, adnsonetTotalBBEs Gauge, adnsonetTotalUASs Gauge } adnsonetTotalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the 24-hour reporting period. It is the sum of ES statistics for the 96 15-minute intervals." ::= { adnsonetTotalEntry 1 } adnsonetTotalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the 24-hour reporting period. It is the sum of SES statistics for the 96 15-minute intervals." ::= { adnsonetTotalEntry 2 } adnsonetTotalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the 24-hour reporting period. It is the sum of BBE statistics for the 96 15-minute intervals." ::= { adnsonetTotalEntry 3 } adnsonetTotalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered during the 24-hour reporting period. It is the sum of UAS statistics for the 96 15-minute intervals." ::= { adnsonetTotalEntry 4 } adnsonetDayTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Day table." ::= { adnsonetITUperf 4 } adnsonetDayEntry OBJECT-TYPE SYNTAX AdnSonetDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Day table." INDEX { ifIndex } ::= { adnsonetDayTable 1 } AdnSonetDayEntry ::= SEQUENCE { adnsonetDayESs Gauge, adnsonetDaySESs Gauge, adnsonetDayBBEs Gauge, adnsonetDayUASs Gauge } adnsonetDayESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered during the current day (from 0 hours to the current time)." ::= { adnsonetDayEntry 1 } adnsonetDaySESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered during the current day (from 0 hours to the current time)." ::= { adnsonetDayEntry 2 } adnsonetDayBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered during the current day (from 0 hours to the current time)." ::= { adnsonetDayEntry 3 } adnsonetDayUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of unavailable seconds (UAS) encountered during the current day (from 0 hours to the current time)." ::= { adnsonetDayEntry 4 } adnsonetFarEndCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetFarEndCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Far End Current table." ::= { adnsonetFarEndITUperf 1 } adnsonetFarEndCurrentEntry OBJECT-TYPE SYNTAX AdnSonetFarEndCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Far End Current table." INDEX { ifIndex } ::= { adnsonetFarEndCurrentTable 1 } AdnSonetFarEndCurrentEntry ::= SEQUENCE { adnsonetFarEndCurrentESs Gauge, adnsonetFarEndCurrentSESs Gauge, adnsonetFarEndCurrentBBEs Gauge } adnsonetFarEndCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current 15-minute interval." ::= { adnsonetFarEndCurrentEntry 1 } adnsonetFarEndCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current 15-minute interval." ::= { adnsonetFarEndCurrentEntry 2 } adnsonetFarEndCurrentBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current 15-minute interval." ::= { adnsonetFarEndCurrentEntry 3 } adnsonetFarEndIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetFarEndIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Far End Interval table." ::= { adnsonetFarEndITUperf 2 } adnsonetFarEndIntervalEntry OBJECT-TYPE SYNTAX AdnSonetFarEndIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Far End Interval table." INDEX { ifIndex, adnsonetFarEndIntervalNumber } ::= { adnsonetFarEndIntervalTable 1 } AdnSonetFarEndIntervalEntry ::= SEQUENCE { adnsonetFarEndIntervalNumber INTEGER (-2147483648..2147483647), adnsonetFarEndIntervalESs Gauge, adnsonetFarEndIntervalSESs Gauge, adnsonetFarEndIntervalBBEs Gauge } adnsonetFarEndIntervalNumber OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number which identifies the interval for which the set of statistics is available. The previous 24-hour period is divided into 96 15-minute intervals. The interval identified by 1 is the most recently completed 15-minute interval and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { adnsonetFarEndIntervalEntry 1 } adnsonetFarEndIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnsonetFarEndIntervalEntry 2 } adnsonetFarEndIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during a particular 15-minute interval." ::= { adnsonetFarEndIntervalEntry 3 } adnsonetFarEndIntervalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during a particular 15-minute interval." ::= { adnsonetFarEndIntervalEntry 4 } adnsonetFarEndTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetFarEndTotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Far End Total table." ::= { adnsonetFarEndITUperf 3 } adnsonetFarEndTotalEntry OBJECT-TYPE SYNTAX AdnSonetFarEndTotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Far End Total table." INDEX { ifIndex } ::= { adnsonetFarEndTotalTable 1 } AdnSonetFarEndTotalEntry ::= SEQUENCE { adnsonetFarEndTotalESs Gauge, adnsonetFarEndTotalSESs Gauge, adnsonetFarEndTotalBBEs Gauge } adnsonetFarEndTotalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End ES statistics for the 96 15-minute intervals." ::= { adnsonetFarEndTotalEntry 1 } adnsonetFarEndTotalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End SES statistics for the 96 15-minute intervals." ::= { adnsonetFarEndTotalEntry 2 } adnsonetFarEndTotalBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the 24-hour reporting period. It is the sum of Far End BBE statistics for the 96 15-minute intervals." ::= { adnsonetFarEndTotalEntry 3 } adnsonetFarEndDayTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetFarEndDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Far End Day table." ::= { adnsonetFarEndITUperf 4 } adnsonetFarEndDayEntry OBJECT-TYPE SYNTAX AdnSonetFarEndDayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Far End Day table." INDEX { ifIndex } ::= { adnsonetFarEndDayTable 1 } AdnSonetFarEndDayEntry ::= SEQUENCE { adnsonetFarEndDayESs Gauge, adnsonetFarEndDaySESs Gauge, adnsonetFarEndDayBBEs Gauge } adnsonetFarEndDayESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of errored seconds (ES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnsonetFarEndDayEntry 1 } adnsonetFarEndDaySESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of severely errored seconds (SES) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnsonetFarEndDayEntry 2 } adnsonetFarEndDayBBEs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of background errored blocks (BBE) encountered by the remote equipment during the current day (from 0 hours to the current time)." ::= { adnsonetFarEndDayEntry 3 } adnsonetMaintenanceTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnSonetMaintenanceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN SONET/SDH Maintenance table." ::= { adnsonetMaintenance 1 } adnsonetMaintenanceEntry OBJECT-TYPE SYNTAX AdnSonetMaintenanceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN SONET/SDH Maintenance table." INDEX { ifIndex } ::= { adnsonetMaintenanceTable 1 } AdnSonetMaintenanceEntry ::= SEQUENCE { adnsonetLineHWStatus INTEGER (-2147483648..2147483647), adnsonetLinePerfStatus INTEGER (-2147483648..2147483647) } adnsonetLineHWStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the hardware status of a line. The given status value corresponds to the last test initiated by setting the nominator ifTestType with adnIfTest- TypeLineHW test identifier. If the result of the test, given by the nominator ifTestResult, is different than 'success' or 'failed', the given status value is not significant. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetLineHWNoDefect bit should be set only if no other bit is set. If the status is not significant, all the bits are reset. The bit positions are : (BBTS1C board): 1 adnsonetLineHWNoDefect 2 not used 4 not used 8 PM5357 chip failure at line side 16 applique failure (BBS1B, BBS1B3, BBS1B2, or BBS1B4 boards): 1 adnsonetLineHWNoDefect 2 BGPHT chip failure 4 BGS1B chip failure at ET side 8 BGS1B chip failure at line side 16 applique failure (BBS4B, or BBS4B2 boards): 1 adnsonetLineHWNoDefect 2 BGPHT chip failure 4 not used 8 PM5355 chip failure at line side 16 applique failure " ::= { adnsonetMaintenanceEntry 1 } adnsonetLinePerfStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the performance status of the interface. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnsonetNoDefect bit should be set only if no other bit is set. The adnsonetUnavailablePeriod bit indicates that the interface has entered an unavailable period. Each CrossingThreshold bit indicates that the corresponding performance counter has reached its threshold. The bit positions are: 1 adnsonetNoDefect 2 adnsonetUnavailablePeriod 4 adnsonetCurrentCrossingThresholdESs 8 adnsonetCurrentCrossingThresholdSESs 16 adnsonetCurrentCrossingThresholdBBEs 32 adnsonetCurrentCrossingThresholdFarEndESs 64 adnsonetCurrentCrossingThresholdFarEndSESs 128 adnsonetCurrentCrossingThresholdFarEndBBEs 256 adnsonetCurrentCrossingThresholdUASs 512 adnsonetDayCrossingThresholdESs 1024 adnsonetDayCrossingThresholdSESs 2048 adnsonetDayCrossingThresholdBBEs 4096 adnsonetDayCrossingThresholdFarEndESs 8192 adnsonetDayCrossingThresholdFarEndSESs 16384 adnsonetDayCrossingThresholdFarEndBBEs 32768 adnsonetDayCrossingThresholdUASs " ::= { adnsonetMaintenanceEntry 2 } adnAtmMIB OBJECT IDENTIFIER ::= { adnExtensions 37 } adnAtmMIBObjects OBJECT IDENTIFIER ::= { adnAtmMIB 1 } AdnAtmAdminStatus ::= INTEGER { up(1), down(2) } AdnAtmAllocOrder ::= INTEGER { increasing(1), decreasing(2), notSignificant(3) } AdnAtmCniOperStatus ::= INTEGER { fast(1), slow(2), rxcall(3), callup(4) } AdnAtmCniSourceDest ::= INTEGER { source(1), destination(2) } AdnAtmDirectedPath ::= AdnEnableDisabled AdnAtmDirRoutFlag ::= INTEGER { other(1), preferred(2), exclusive(3) } AdnAtmNumPlan ::= INTEGER { private(1), nsapE164(2), nativeE164(3), other(4), notSignificant(5) } AdnAtmOperStatus ::= INTEGER { up(1), down(2) } AdnAtmSigPIUpdate ::= INTEGER { other(1), permanentAllowed(2), permanentRestricted(3), perCallAllowed(4), perCallRestricted(5), disabled(6) } AdnAtmSigScreening ::= INTEGER { other(1), transparent(2), none(3), alwaysAccept(4), acceptAndCorrect(5), refuse(6) } AdnAtmUniOperStatus ::= INTEGER { fast(1), slow(2), rxcall(3), callup(4) } AdnAtmUniSourceDest ::= INTEGER { source(1), destination(2) } AdnAtmVlAISStatus ::= INTEGER { aisOn(1), aisOff(2), notSignificant(3) } AdnAtmVlPolicing ::= INTEGER { notPoliced(1), policeNoSpacing(2), policed(3), supervision(4), useInterfaceValue(5) } AdnAtmVlTrfDescrType ::= INTEGER { pcrCdv(1), pcrCdvScrMbs(2), pcrCdvPcr0(3), pcrCdvScr0Mbs0(4) } AdnAtmVlTrfCapability ::= INTEGER { ubr(1), cbrRtAggregate(2), vbrNrtAggregate(3), cbrNrtAggregate(4), vbrRtAggregate(5), cbrRtClpZero(6), vbrRtClpZero(7), vbrNrtClpZero(8) } AdnAtmVlType ::= INTEGER { pvc(1), svc(2), internalVc(3) } adnAtmLogLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmLogLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the logical line supporting the logical inter-node ATM interfaces." ::= { adnAtmMIBObjects 1 } adnAtmLogLineEntry OBJECT-TYPE SYNTAX AdnAtmLogLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmLogLineTable. There is one entry for each logical line." INDEX { ifIndex } ::= { adnAtmLogLineTable 1 } AdnAtmLogLineEntry ::= SEQUENCE { adnAtmLogLineVuniIfIndex InterfaceIndex, adnAtmLogLineVuniVpi INTEGER } adnAtmLogLineVuniIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the Virtual-User Network Interface (V-UNI) associated with this logical line. Common Name: V-UNI ifIndex" ::= { adnAtmLogLineEntry 1 } adnAtmLogLineVuniVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) on the Virtual-User Network Interface (V-UNI) associated with this logical line. This VPI is unique to this logical line and is used as the logical line number. Common Name: Logical Line" ::= { adnAtmLogLineEntry 2 } adnAtmInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the extension of the atmInterfaceConfTable table, described in RFC 1695. This table contains proprietary ATM interface configuration parameters, one entry per ATM interface." ::= { adnAtmMIBObjects 2 } adnAtmInterfaceConfEntry OBJECT-TYPE SYNTAX AdnAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmInterfaceConfTable. There is one entry for each ATM interface." INDEX { ifIndex } ::= { adnAtmInterfaceConfTable 1 } AdnAtmInterfaceConfEntry ::= SEQUENCE { adnAtmInterfaceLowLayerIfIndex InterfaceIndex, adnAtmInterfaceType INTEGER, adnAtmInterfaceMaxFillingRate INTEGER, adnAtmInterfaceBWThreshold1 INTEGER, adnAtmInterfaceBWThreshold2 INTEGER, adnAtmInterfaceBWThreshold3 INTEGER, adnAtmInterfaceMaxPtpVcs INTEGER, adnAtmInterfaceMaxPtMCc INTEGER, adnAtmInterfaceMaxPvcc INTEGER, adnAtmInterfaceMaxSvcc INTEGER, adnAtmInterfaceVccLowVpi INTEGER, adnAtmInterfaceVccHighVpi INTEGER, adnAtmInterfaceMaxPVpcs INTEGER, adnAtmInterfacePvpcLowVpi INTEGER, adnAtmInterfacePvpcHighVpi INTEGER, adnAtmInterfaceMaxSVpcs INTEGER, adnAtmInterfaceSvpcAllocOrd AdnAtmAllocOrder, adnAtmInterfaceSvpcLowVpi INTEGER, adnAtmInterfaceSvpcHighVpi INTEGER, adnAtmInterfaceMaxActiveVpVpiBits INTEGER, adnAtmInterfaceMaxActiveVcVpiBits INTEGER, adnAtmInterfaceCharging AdnEnableDisabled, adnAtmInterfaceStatistics AdnEnableDisabled, adnAtmInterfaceTraps AdnEnableDisabled, adnAtmInterfaceUserNetFlg INTEGER, adnAtmInterfaceSigType INTEGER, adnAtmInterfaceRemRoutingNodeID AdnRoutingID, adnAtmInterfaceRemIfIndex InterfaceIndex, adnAtmInterfaceCniBlockingStatus INTEGER, adnAtmInterfaceMaxVcs INTEGER, adnAtmInterfaceMaxPtmRootVcs INTEGER, adnAtmInterfaceMaxPtmLeafVcs INTEGER, adnAtmInterfaceMaxVpiForVccs INTEGER, adnAtmInterfaceCacAlgorithm AdnEnableDisabled, adnAtmInterfaceK INTEGER, adnAtmInterfaceKUbr INTEGER, adnAtmInterfaceUbr1Tagging AdnEnableDisabled, adnAtmInterfacePolicing INTEGER, adnAtmInterfaceMonetaryCost INTEGER, adnAtmInterfaceTransitDelay INTEGER, adnAtmInterfaceMaxTDSensitive INTEGER, adnAtmInterfaceMaxTDOther INTEGER, adnAtmInterfaceChargingBehaviour INTEGER, adnAtmInterfaceAddrRegistration AdnEnableDisabled, adnAtmInterfaceSvcCdvTol INTEGER, adnAtmInterfaceVpiForVccAllocOrd AdnAtmAllocOrder, adnAtmInterfaceRemNodeMacNum INTEGER (-2147483648..2147483647), adnAtmInterfaceRemNodeAreaNum INTEGER (-2147483648..2147483647), adnAtmInterfaceAllowedAtc INTEGER } adnAtmInterfaceLowLayerIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the logical or physical line supporting this ATM interface. The line is considered to be the lower layer of the ATM interface. Common Name: Lower Layer Interface Index" ::= { adnAtmInterfaceConfEntry 1 } adnAtmInterfaceType OBJECT-TYPE SYNTAX INTEGER { externalUni(1), nni(2), internalUniSig(3), virtualUni(4), physicalCni(5), routlogicalCni(6), nonroutlogicalCni(7), nonroutlogicalCniendtoend(8), internalUni(9), tdpAccess(10), tdpTrunk(11) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of ATM interface: - 'externalUni': On an High Speed Coupler (HSC) line - 'nni': On a HSC line, connected to a Virtual Path (VP) switched network - 'internalUniSig': On a Cell Interconnection Gateway (CIG) internal line used for special connections such as routing, signalling and ILMI - 'virtualUni': Logical interface supporting the Virtual Path Connection (VPC) used to support the logical Cell alcatel Network protocol Interfaces (CNIs) - 'physicalCni': Inter-node physical interface (on a HSC line) - 'routlogicalCni': Routable logical CNI, supported by a logical line (inter-node VPC) - 'nonroutlogicalCni': Non-routable logical CNI, known only by path select - 'nonroutlogicalCniendtoend': Non-routable logical CNI; end-to-end identical to previous one but disallowed for transit Virtual Channel Connections (VCCs) - 'internalUni': On a board internal line (e.g. Circuit Emulation Service (CES) board). - 'tdpAccess': Tag Distribution Protocol (TDP) capable access. It can be a regular Tag Edge Router (TER) or a Tag Switch Controller (TSC). It is supported by an ATM logical line - 'tdpTrunk': TDP capable trunk. It is supported by an ATM logical line. Common Name: Interface Type" ::= { adnAtmInterfaceConfEntry 2 } adnAtmInterfaceMaxFillingRate OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS mandatory DESCRIPTION "The maximum filling rate on this ATM interface. This value is the percentage of data that can be loaded on the line. For example, if the ifspeed is 100000 Mbits and the maximum filling rate is 80%, the total bandwidth allowed on the line is 80000 Mbits. When the maximum filling rate is reached, no more calls are accepted on the ATM interface. Common Name: Filling Rate (%)" ::= { adnAtmInterfaceConfEntry 3 } adnAtmInterfaceBWThreshold1 OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The ATM interface's higher bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Higher Bandwidth Threshold" ::= { adnAtmInterfaceConfEntry 4 } adnAtmInterfaceBWThreshold2 OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The ATM interface's medium bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Medium Bandwidth Threshold" ::= { adnAtmInterfaceConfEntry 5 } adnAtmInterfaceBWThreshold3 OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The ATM interface's lower bandwidth threshold, used for path selection on the Cell alcatel Network protocol Interface (CNI) to calculate actual available bandwidth. The value, expressed as a percentage, is significant only if this is a CNI; otherwise, it is 0. Common Name: Lower Bandwidth Threshold" ::= { adnAtmInterfaceConfEntry 6 } adnAtmInterfaceMaxPtpVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of point-to-point Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) on this ATM interface. Common Name: Max Point-to-Point Virtual Connections" ::= { adnAtmInterfaceConfEntry 7 } adnAtmInterfaceMaxPtMCc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The maximum number of point-to-multipoint cross-connections on this ATM interface. Common Name: Max Point-to-Multipoint Cross Connections" ::= { adnAtmInterfaceConfEntry 8 } adnAtmInterfaceMaxPvcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The maximum number of permanent Virtual Channel Connections (VCCs) on this ATM interface. Common Names: Max Permanent VCCs, Max P-VCCs" ::= { adnAtmInterfaceConfEntry 9 } adnAtmInterfaceMaxSvcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The maximum number of switched Virtual Channel Connections (VCCs) on this ATM interface. Common Names: Max Switched VCCs, Max S-VCCs" ::= { adnAtmInterfaceConfEntry 10 } adnAtmInterfaceVccLowVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low value of the Virtual Path Identifier (VPI) range dedicated to Virtual Channel (VC) switching on this ATM interface. Common Name: Low VPI Value" ::= { adnAtmInterfaceConfEntry 11 } adnAtmInterfaceVccHighVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high value of the Virtual Path Identifier (VPI) range dedicated to Virtual Channel (VC) switching on this ATM interface. Common Name: High VPI Value" ::= { adnAtmInterfaceConfEntry 12 } adnAtmInterfaceMaxPVpcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of permanent Virtual Path Connections (VPCs) on this ATM interface. Common Names: Max Permanent VPCs, Max P-VPCs" ::= { adnAtmInterfaceConfEntry 13 } adnAtmInterfacePvpcLowVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low value of the Virtual Path Identifier (VPI) range dedicated to permanent Virtual Path Connections (VPCs) on this ATM interface. Common Name: Low VPI Value (P-VPCs)" ::= { adnAtmInterfaceConfEntry 14 } adnAtmInterfacePvpcHighVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high value of the Virtual Path Identifier (VPI) range dedicated to permanent Virtual Path Connections (VPCs) on this ATM interface. Common Name: High VPI Value (P-VPCs)" ::= { adnAtmInterfaceConfEntry 15 } adnAtmInterfaceMaxSVpcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of switched Virtual Path Connections (VPCs) on this ATM interface. Common Names: Max Switched VPCs, Max S-VPCs" ::= { adnAtmInterfaceConfEntry 16 } adnAtmInterfaceSvpcAllocOrd OBJECT-TYPE SYNTAX AdnAtmAllocOrder ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) allocation order for switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: VPI Allocation Order (S-VPCs)" ::= { adnAtmInterfaceConfEntry 17 } adnAtmInterfaceSvpcLowVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low value of the Virtual Path Identifier (VPI) range dedicated to switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: Low VPI Value (S-VPCs)" ::= { adnAtmInterfaceConfEntry 18 } adnAtmInterfaceSvpcHighVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high value of the Virtual Path Identifier (VPI) range dedicated to switched Virtual Path Connections (VPCs) on this ATM interface. Common Name: High VPI Value (S-VPCs)" ::= { adnAtmInterfaceConfEntry 19 } adnAtmInterfaceMaxActiveVpVpiBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of active Virtual Path Identifier (VPI) bits configured for use on this ATM interface, in Virtual Path (VP) switch mode. The not significant value is 0. Common Name: Max VPI Bits for VPCs" ::= { adnAtmInterfaceConfEntry 20 } adnAtmInterfaceMaxActiveVcVpiBits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of active Virtual Path Identifier (VPI) bits configured for use on this ATM interface, in Virtual Channel (VC) switch mode. The not significant value is 0. Common Name: Max VPI Bits for VCCs" ::= { adnAtmInterfaceConfEntry 21 } adnAtmInterfaceCharging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether charging is enabled for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. For the PVCs (VPCs and VCCs) the charging status could be defined per cross-connection." ::= { adnAtmInterfaceConfEntry 22 } adnAtmInterfaceStatistics OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Whether statistics are enabled for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. For the PVCs (VPCs and VCCs) the statistics status could be defined per cross-connection. Common Name: Statistics" ::= { adnAtmInterfaceConfEntry 23 } adnAtmInterfaceTraps OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Whether traps are reported to the NMS for this interface. Traps can be reported at ATM interface level, virtual connection level, Signalling ATM Adaptation Layer (SAAL) level and signalling level. Common Name: Traps" ::= { adnAtmInterfaceConfEntry 24 } adnAtmInterfaceUserNetFlg OBJECT-TYPE SYNTAX INTEGER { user(1), network(2), notsignificant(3) } ACCESS read-only STATUS deprecated DESCRIPTION "Whether the interface follows the user or network side of the protocol recommendations. Common Names: User or Network Side, User/Network" ::= { adnAtmInterfaceConfEntry 25 } adnAtmInterfaceSigType OBJECT-TYPE SYNTAX INTEGER { nonAssociated(1), associated(2), noSignalling(3), ipTdp(4), ipTdpCvsi(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of signalling used for the interface: The following three types are allowed for non Tag Distribution Protocol (TDP) interfaces: - 'nonAssociated': An unique signalling Virtual Channel Connection (VCC) is used to control the Virtual Path Connections (VPCs) and VCCs for the interface - 'associated': Several signalling VCCs used. One controls the interface VPCs. There is also a signalling VCC for each Virtual Path Identifier (VPI) value dedicated to Virtual Channel (VC) switching which controls the VCC having the VPI value - 'noSignalling': No signalling VCC used. The following two types are allowed for TDP interfaces only: - 'ipTdp': An unique signalling VCC is used to control the VCCs for the interface. - 'ipTdpCvsi': In addition to a signalling VCC used to control the VCCs for the interface, there is an extra VCC carrying Cisco Virtual Switch Interface (CVSI) messages between the High Speed System (HSS) and the connected 'tdpAccess' acting as a Tag Switch Controller (TSC). Common Name: Signal Type" ::= { adnAtmInterfaceConfEntry 26 } adnAtmInterfaceRemRoutingNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The remote node identifier. This is significant only if this is a Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 27 } adnAtmInterfaceRemIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the remote ATM interface. This is significant only if this is a Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 28 } adnAtmInterfaceCniBlockingStatus OBJECT-TYPE SYNTAX INTEGER { available(1), blocked(2), notSignificant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The blocking status of the Cell alcatel Network protocol Interface (CNI): - 'available': The CNI can be used to establish new Virtual Path Connections (VPCs) or Virtual Channel Connections (VCCs) - 'blocked': The CNI is not used for establishing new VPCs or VCCs - 'notSignificant': For all ATM interface types except 'physicalCni' and 'routlogicalCni'. Common Name: Blocking Status" ::= { adnAtmInterfaceConfEntry 29 } adnAtmInterfaceMaxVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs) on this ATM interface. Common Name: Max Virtual Connections" ::= { adnAtmInterfaceConfEntry 30 } adnAtmInterfaceMaxPtmRootVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of point-to-multipoint root Virtual Connections (VCs) on this ATM interface. Common Name: Max Point-to-Multipoint Root Virtual Connections" ::= { adnAtmInterfaceConfEntry 31 } adnAtmInterfaceMaxPtmLeafVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of point-to-multipoint leaf Virtual Connections (VCs) on this ATM interface. Common Name: Max Point-to-Multipoint Leaf Virtual Connections" ::= { adnAtmInterfaceConfEntry 32 } adnAtmInterfaceMaxVpiForVccs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on this ATM interface." ::= { adnAtmInterfaceConfEntry 33 } adnAtmInterfaceCacAlgorithm OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether Connection Admission Control (CAC) algorithm is enabled on this interface. This nominator doesn't have any impact on the CAC algorithm applied on the AEI associated to this interface." ::= { adnAtmInterfaceConfEntry 34 } adnAtmInterfaceK OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS mandatory DESCRIPTION "The Connection Admission Control (CAC) overbooking factor, expressed as a percentage, on the ATM interface." ::= { adnAtmInterfaceConfEntry 35 } adnAtmInterfaceKUbr OBJECT-TYPE SYNTAX AdnPercent ACCESS read-only STATUS mandatory DESCRIPTION "The Connection Admission Control (CAC) overbooking factor, expressed as a percentage, for Unspecified Bit Rate (UBR) connections." ::= { adnAtmInterfaceConfEntry 36 } adnAtmInterfaceUbr1Tagging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS deprecated DESCRIPTION "Whether the switch accepts to treat the Switched Virtual Connections (SVCs) Unspecified Bit Rate (UBR) with no tagging (ubr.1) (specified in the Setup message received) as an UBR connection with tagging (ubr.2). The non significant value is 'disabled'." ::= { adnAtmInterfaceConfEntry 37 } adnAtmInterfacePolicing OBJECT-TYPE SYNTAX INTEGER { notPoliced(1), policed(3), supervision(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the policing function applied, in the receiving direction, for all Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface: - 'notPoliced': Police disabled - 'policed': Police enabled - 'supervision': Police disabled, but the police counters are updated. For the PVCs (VPCs and VCCs) the policing function could be defined per cross-connection. Common Name: Policing" ::= { adnAtmInterfaceConfEntry 38 } adnAtmInterfaceMonetaryCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The monetary cost associated to this ATM interface. This object is significant only if the interface type is a routable Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 39 } adnAtmInterfaceTransitDelay OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The transit delay configured for this ATM interface. This object is significant only if the interface type is a routable Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 40 } adnAtmInterfaceMaxTDSensitive OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed transit delay for all delay sensitive Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. The delay sensitivity of a connection is deduced from the ATM Transfer Capability (ATC) of the link, specified by adnAtmVplTransferCapability and adnAtmVclTransferCapability. For the PVCs (VPCs and VCCs) the maximum allowed transit delay could be defined per connection. This object is significant only if the interface type is not a Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 41 } adnAtmInterfaceMaxTDOther OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed transit delay for all no delay sensitive Switched Virtual Connections (SVCs) (switched Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) and the default value for the Permanent Virtual Connections (PVCs) supported by this ATM interface. The delay sensitivity of a connection is deduced from the ATM Transfer Capability (ATC) of the link, specified by adnAtmVplTransferCapability and adnAtmVclTransferCapability. For the PVCs (VPCs and VCCs) the maximum allowed transit could be defined per connection. This object is significant only if the interface type is not a Cell alcatel Network protocol Interface (CNI)." ::= { adnAtmInterfaceConfEntry 42 } adnAtmInterfaceChargingBehaviour OBJECT-TYPE SYNTAX INTEGER { other(1), acceptCalls(2), refuseCalls(3), refuseAndReleaseCalls(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the behaviour of the switch when the charging tickets could not be generated for the Virtual Connections (VCs) (Virtual Path Connections (VPCs) and Virtual Channel Connections (VCCs)) supported by this ATM interface: - 'acceptCalls': The new calls are accepted and the established connections are not released - 'refuseCalls': The new calls are refused and the established connections are not released - 'refuseAndReleaseCalls': The new calls are refused and the established connections are released." ::= { adnAtmInterfaceConfEntry 43 } adnAtmInterfaceAddrRegistration OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether the address registration procedure is enabled." REFERENCE "Whether the address registration procedure is enabled." ::= { adnAtmInterfaceConfEntry 44 } adnAtmInterfaceSvcCdvTol OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "Value of the Cell Delay Variation Tolerance (CDVTOL) for Switched Virtual Connections (SVCs). Value 0 means that the CDVTOL is chosen internally by the switch. Common Names: SVC CDV Tolerance." ::= { adnAtmInterfaceConfEntry 45 } adnAtmInterfaceVpiForVccAllocOrd OBJECT-TYPE SYNTAX AdnAtmAllocOrder ACCESS read-only STATUS mandatory DESCRIPTION "The allocation order for Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmInterfaceConfEntry 46 } adnAtmInterfaceRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmInterfaceRemRoutingNodeID." ::= { adnAtmInterfaceConfEntry 47 } adnAtmInterfaceRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmInterfaceRemRoutingNodeID." ::= { adnAtmInterfaceConfEntry 48 } adnAtmInterfaceAllowedAtc OBJECT-TYPE SYNTAX INTEGER { other(1), anyAtc(2), onlyUbr1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Allowed ATM Transfer Capabilities (ATC) for a Virtual Path Connection (VPC) or Virtual Channel Connection (VCC) supported by the ATM interface: - 'anyAtc': The ATM interface is able to support any ATC - 'ubr1Only': The ATM interface can only support Unspecified Bit Rate 1 (UBR1) ATC." ::= { adnAtmInterfaceConfEntry 49 } adnAtmVpiVccConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVpiVccConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the characteristics of the ATM interface's Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmMIBObjects 3 } adnAtmVpiVccConfEntry OBJECT-TYPE SYNTAX AdnAtmVpiVccConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVpiVccConfTable. There is one entry for each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface." INDEX { ifIndex, adnAtmVpiVccIndex } ::= { adnAtmVpiVccConfTable 1 } AdnAtmVpiVccConfEntry ::= SEQUENCE { adnAtmVpiVccIndex INTEGER, adnAtmVpiVccTrmBandwidth INTEGER, adnAtmVpiVccRcvBandwidth INTEGER, adnAtmVpiVccMaxFillingRate INTEGER, adnAtmVpiVccMaxVcc INTEGER, adnAtmVpiVccMaxPVccs INTEGER, adnAtmVpiVccPvccLowVci INTEGER, adnAtmVpiVccPvccHighVci INTEGER, adnAtmVpiVccMaxSVccs INTEGER, adnAtmVpiVccSvccAllocOrd AdnAtmAllocOrder, adnAtmVpiVccSvccLowVci INTEGER, adnAtmVpiVccSvccHighVci INTEGER } adnAtmVpiVccIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on the ATM interface." ::= { adnAtmVpiVccConfEntry 1 } adnAtmVpiVccTrmBandwidth OBJECT-TYPE SYNTAX INTEGER -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth limitation (if any) of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) in the transmit direction. If both adnAtmVpiVccTrmBandwidth and adnAtmVpiVccRcvBandwidth are set to zero, the bandwidth limitation is the interface bandwidth." ::= { adnAtmVpiVccConfEntry 2 } adnAtmVpiVccRcvBandwidth OBJECT-TYPE SYNTAX INTEGER -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth limitation (if any) of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) in the receiving direction. If both adnAtmVpiVccRcvBandwidth and adnAtmVpiVccTrmBandwidth are '0', the bandwidth limitation is the interface bandwidth." ::= { adnAtmVpiVccConfEntry 3 } adnAtmVpiVccMaxFillingRate OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth filling rate of the Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccConfEntry 4 } adnAtmVpiVccMaxVcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The maximum number of Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max VCCs on VPI" ::= { adnAtmVpiVccConfEntry 5 } adnAtmVpiVccMaxPVccs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of permanent Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max P-VCCs on VPI" ::= { adnAtmVpiVccConfEntry 6 } adnAtmVpiVccPvccLowVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low value of the Virtual Channel Identifier (VCI) range dedicated to permanent Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI)." ::= { adnAtmVpiVccConfEntry 7 } adnAtmVpiVccPvccHighVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high value of the Virtual Channel Identifier (VCI) range dedicated to permanent Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI)." ::= { adnAtmVpiVccConfEntry 8 } adnAtmVpiVccMaxSVccs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of switched Virtual Channel Connections (VCCs) that can be set up on this Virtual Path Identifier (VPI). Common Name: Max S-VCCs on VPI" ::= { adnAtmVpiVccConfEntry 9 } adnAtmVpiVccSvccAllocOrd OBJECT-TYPE SYNTAX AdnAtmAllocOrder ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) allocation order for switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI)." ::= { adnAtmVpiVccConfEntry 10 } adnAtmVpiVccSvccLowVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The low value of the Virtual Channel Identifier (VCI) range dedicated to switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI)." ::= { adnAtmVpiVccConfEntry 11 } adnAtmVpiVccSvccHighVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The high value of the Virtual Channel Identifier (VCI) range dedicated to switched Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI)." ::= { adnAtmVpiVccConfEntry 12 } adnAtmSaalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmSaalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the ATM Adaptation Layer (AAL) configuration used in the ATM signalling and routing protocol stacks." ::= { adnAtmMIBObjects 4 } adnAtmSaalEntry OBJECT-TYPE SYNTAX AdnAtmSaalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmSaalTable. There is one entry for each ATM Adaptation Layer (AAL) connection on an ATM interface." INDEX { ifIndex, adnAtmSaalVpi, adnAtmSaalVci } ::= { adnAtmSaalTable 1 } AdnAtmSaalEntry ::= SEQUENCE { adnAtmSaalVpi INTEGER, adnAtmSaalVci INTEGER, adnAtmSaalConnectType INTEGER, adnAtmSaalBandwidth INTEGER, adnAtmSaalMaxCC INTEGER, adnAtmSaalMaxPD INTEGER, adnAtmSaalMaxSTAT INTEGER, adnAtmSaalCCTimer INTEGER, adnAtmSaalNoRespTimer INTEGER, adnAtmSaalPollTimer INTEGER, adnAtmSaalKeepAliveTimer INTEGER, adnAtmSaalIdleTimer INTEGER, adnAtmSaalMaxLength INTEGER, adnAtmSaalAdminStatus AdnAtmAdminStatus, adnAtmSaalOperStatus AdnAtmOperStatus } adnAtmSaalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) value of the Virtual Channel Connection (VCC) for this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 1 } adnAtmSaalVci OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) value of the Virtual Channel Connection (VCC) for this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 2 } adnAtmSaalConnectType OBJECT-TYPE SYNTAX INTEGER { other(1), signalling(2), routing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the ATM Adaptation Layer (AAL) connection." ::= { adnAtmSaalEntry 3 } adnAtmSaalBandwidth OBJECT-TYPE SYNTAX INTEGER -- UNITS bits/sec ACCESS read-only STATUS deprecated DESCRIPTION "The bandwidth of the Virtual Channel Connection (VCC) supporting this ATM Adaptation Layer (AAL) connection." ::= { adnAtmSaalEntry 4 } adnAtmSaalMaxCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of times an unacknowledged Connection Control (CC) Protocol Data Unit (PDU) can be resent for this Signalling ATM Adaptation Layer (SAAL) connection. The connection is aborted when this value is exceeded." REFERENCE "The maximum number of times an unacknowledged Connection Control (CC) Protocol Data Unit (PDU) can be resent for this Signalling ATM Adaptation Layer (SAAL) connection. The connection is aborted when this value is exceeded." ::= { adnAtmSaalEntry 5 } adnAtmSaalMaxPD OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Sequenced Data (SD) Protocol Data Units (PDUs) that can be sent before a polling PDU for this Signalling ATM Adaptation Layer (SAAL) connection." REFERENCE "The maximum number of Sequenced Data (SD) Protocol Data Units (PDUs) that can be sent before a polling PDU for this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 6 } adnAtmSaalMaxSTAT OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of status parameters that can be sent in a STATus (STAT) Protocol Data Unit (PDU) for this Signalling ATM Adaptation Layer (SAAL) connection. The value must be an odd number." REFERENCE "The maximum number of status parameters that can be sent in a STATus (STAT) Protocol Data Unit (PDU) for this Signalling ATM Adaptation Layer (SAAL) connection. The value must be an odd number." ::= { adnAtmSaalEntry 7 } adnAtmSaalCCTimer OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in milliseconds) of the Connection Control (CC) Protocol Data Unit (PDU) timer for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the CC PDU is resent." REFERENCE "The length (in milliseconds) of the Connection Control (CC) Protocol Data Unit (PDU) timer for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the CC PDU is resent." ::= { adnAtmSaalEntry 8 } adnAtmSaalNoRespTimer OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time interval (in seconds) between STATtus (STAT) Protocol Data Units (PDUs) received for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the connection is aborted." REFERENCE "The time interval (in seconds) between STATtus (STAT) Protocol Data Units (PDUs) received for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, the connection is aborted." ::= { adnAtmSaalEntry 9 } adnAtmSaalPollTimer OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The time interval (in milliseconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) during the data transfer phase for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, a POLL PDU is sent." REFERENCE "The time interval (in milliseconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) during the data transfer phase for this Signalling ATM Adaptation Layer (SAAL) connection. If this timer expires, a POLL PDU is sent." ::= { adnAtmSaalEntry 10 } adnAtmSaalKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time (in milliseconds) allocated for waiting for the STATus (STAT) Protocol Data Unit (PDU) solicited by the final POLLing (POLL) PDU when activity ends on this Signalling ATM Adaptation Layer (SAAL) connection." REFERENCE "The amount of time (in milliseconds) allocated for waiting for the STATus (STAT) Protocol Data Unit (PDU) solicited by the final POLLing (POLL) PDU when activity ends on this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 11 } adnAtmSaalIdleTimer OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The time interval (in seconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) when the connection is no longer in the data transfer phase." REFERENCE "The time interval (in seconds) between transmissions of POLLing (POLL) Protocol Data Units (PDUs) when the connection is no longer in the data transfer phase." ::= { adnAtmSaalEntry 12 } adnAtmSaalMaxLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum data length of the information field in Protocol Data Units (PDUs) for this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 13 } adnAtmSaalAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current administrative status of this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 14 } adnAtmSaalOperStatus OBJECT-TYPE SYNTAX AdnAtmOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status of this Signalling ATM Adaptation Layer (SAAL) connection." ::= { adnAtmSaalEntry 15 } adnAtmSigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the signalling entity controlling an ATM interface." ::= { adnAtmMIBObjects 5 } adnAtmSigEntry OBJECT-TYPE SYNTAX AdnAtmSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmSigTable. There is one entry for each Virtual Channel Connection (VCC) controlling an ATM interface." INDEX { ifIndex, adnAtmSigVpi, adnAtmSigVci } ::= { adnAtmSigTable 1 } AdnAtmSigEntry ::= SEQUENCE { adnAtmSigVpi INTEGER, adnAtmSigVci INTEGER, adnAtmSigProtocol INTEGER, adnAtmSigT301 INTEGER, adnAtmSigT302 INTEGER, adnAtmSigT303 INTEGER, adnAtmSigT304 INTEGER, adnAtmSigT306 INTEGER, adnAtmSigT308 INTEGER, adnAtmSigT309 INTEGER, adnAtmSigT310 INTEGER, adnAtmSigT313 INTEGER, adnAtmSigT316 INTEGER, adnAtmSigT317 INTEGER, adnAtmSigT322 INTEGER, adnAtmSigT398 INTEGER, adnAtmSigT399 INTEGER, adnAtmSigT331 INTEGER, adnAtmSigT397 INTEGER, adnAtmSigUserNetFlag INTEGER, adnAtmSigCallProc AdnEnableDisabled, adnAtmSigBrSendComp AdnEnableDisabled, adnAtmSigSetupScreening INTEGER, adnAtmSigDdi AdnEnableDisabled, adnAtmSigMsn AdnEnableDisabled, adnAtmSigSvccReconnect AdnEnableDisabled, adnAtmSigCallBarring INTEGER, adnAtmSigClip INTEGER, adnAtmSigClir AdnAtmSigPIUpdate, adnAtmSigColp INTEGER, adnAtmSigColr AdnAtmSigPIUpdate, adnAtmSigSub AdnEnableDisabled, adnAtmSigUus AdnEnableDisabled, adnAtmSigVpiVciAlloc AdnEnableDisabled, adnAtmSigCniCheckingState INTEGER, adnAtmSigSetupAddr INTEGER, adnAtmSigConnectScreening INTEGER } adnAtmSigVpi OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of the Virtual Path Identifier (VPI) for the Virtual Channel Connection (VCC) supporting this signalling entity." ::= { adnAtmSigEntry 1 } adnAtmSigVci OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of the Virtual Channel Identifier (VCI) for the Virtual Channel Connection (VCC) supporting this signalling entity." ::= { adnAtmSigEntry 2 } adnAtmSigProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), q2931(2), atmfv30(3), atmfv31(4), canpv10(5), atmfv40(6), iisp(7), canpv11(8), canpv20(9) } ACCESS read-only STATUS mandatory DESCRIPTION "The signalling protocol type." REFERENCE "The signalling protocol type." ::= { adnAtmSigEntry 3 } adnAtmSigT301 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon receipt of an Alerting message. This timer is stopped upon receipt of a Connect message. When the timer expires, the connection is released." REFERENCE "The length (in seconds) of the timer started upon receipt of an Alerting message. This timer is stopped upon receipt of a Connect message. When the timer expires, the connection is released." ::= { adnAtmSigEntry 4 } adnAtmSigT302 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer, is not implemented. The length (in seconds) of the timer started upon transmission of a Setup acknowledge message and restarted on the receipt of any Information message not containing a sending complete indication. This timer is stopped upon receipt of any of the following messages: Information message containing a sending complete indication, Alerting, or Connect request message. When the timer expires, a Call proceeding, Alerting or Connect message is sent, as appropriate if sufficient information has been received." REFERENCE "This timer, is not implemented. The length (in seconds) of the timer started upon transmission of a Setup acknowledge message and restarted on the receipt of any Information message not containing a sending complete indication. This timer is stopped upon receipt of any of the following messages: Information message containing a sending complete indication, Alerting, or Connect request message. When the timer expires, a Call proceeding, Alerting or Connect message is sent, as appropriate if sufficient information has been received." ::= { adnAtmSigEntry 5 } adnAtmSigT303 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Setup message. The timer is stopped upon receipt of any of the following messages: Alerting, Connect, Call Proceeding, or Release Complete. The first time this timer expires, the Setup message is resent. The second time it expires, the connection is cleared." REFERENCE "The length (in seconds) of the timer started upon transmission of a Setup message. The timer is stopped upon receipt of any of the following messages: Alerting, Connect, Call Proceeding, or Release Complete. The first time this timer expires, the Setup message is resent. The second time it expires, the connection is cleared." ::= { adnAtmSigEntry 6 } adnAtmSigT304 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer is not implemented. The length (in seconds) of the timer started upon receipt of a Setup acknowledge message and restarted when each Information message is sent. This timer is stopped upon receipt of an Alerting, Connect, or Call proceeding message. When the timer expires, the connection is released." REFERENCE "This timer is not implemented. The length (in seconds) of the timer started upon receipt of a Setup acknowledge message and restarted when each Information message is sent. This timer is stopped upon receipt of an Alerting, Connect, or Call proceeding message. When the timer expires, the connection is released." ::= { adnAtmSigEntry 7 } adnAtmSigT306 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer is not implemented. The length (in seconds) of the timer started upon transmission of a Release message. This timer is stopped upon receipt of a Release complete message. When this timer expires, a Release complete message is sent." REFERENCE "This timer is not implemented. The length (in seconds) of the timer started upon transmission of a Release message. This timer is stopped upon receipt of a Release complete message. When this timer expires, a Release complete message is sent." ::= { adnAtmSigEntry 8 } adnAtmSigT308 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Release message. The timer is stopped upon receipt of a Release or Release complete message. The first time this timer expires, the Release message is resent. The second time it expires, the connection is considered as cleared." REFERENCE "The length (in seconds) of the timer started upon transmission of a Release message. The timer is stopped upon receipt of a Release or Release complete message. The first time this timer expires, the Release message is resent. The second time it expires, the connection is considered as cleared." ::= { adnAtmSigEntry 9 } adnAtmSigT309 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon receipt of a Signalling ATM Adaptation Layer (SAAL) disconnection indication. The timer is stopped upon receipt of a SAAL reconnection indication. If the timer expires, all connections carried by the faulty SAAL connection are released." REFERENCE "The length (in seconds) of the timer started upon receipt of a Signalling ATM Adaptation Layer (SAAL) disconnection indication. The timer is stopped upon receipt of a SAAL reconnection indication. If the timer expires, all connections carried by the faulty SAAL connection are released." ::= { adnAtmSigEntry 10 } adnAtmSigT310 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon receipt of a Call proceeding message. The timer is stopped upon receipt of a Connect or Release message. If the timer expires, the connection is released." REFERENCE "The length (in seconds) of the timer started upon receipt of a Call proceeding message. The timer is stopped upon receipt of a Connect or Release message. If the timer expires, the connection is released." ::= { adnAtmSigEntry 11 } adnAtmSigT313 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Connect message. The timer is stopped upon receipt of a Connect acknowledge message. If the timer expires, the connection is cleared. This timer is only applicable on the user side of the interface." REFERENCE "The length (in seconds) of the timer started upon transmission of a Connect message. The timer is stopped upon receipt of a Connect acknowledge message. If the timer expires, the connection is cleared. This timer is only applicable on the user side of the interface." ::= { adnAtmSigEntry 12 } adnAtmSigT316 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Restart message. The timer is stopped upon receipt of a Restart Acknowledge message. If the timer expires, the Restart message may be resent several times." REFERENCE "The length (in seconds) of the timer started upon transmission of a Restart message. The timer is stopped upon receipt of a Restart Acknowledge message. If the timer expires, the Restart message may be resent several times." ::= { adnAtmSigEntry 13 } adnAtmSigT317 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon receipt of a Restart message. The timer is stopped when the internal clearing of called references is completed. If the timer expires, a maintenance message is sent." REFERENCE "The length (in seconds) of the timer started upon receipt of a Restart message. The timer is stopped when the internal clearing of called references is completed. If the timer expires, a maintenance message is sent." ::= { adnAtmSigEntry 14 } adnAtmSigT322 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Status enquiry message. The timer is stopped upon receipt of a Status, Release, or Release complete message. If the timer expires, the Status enquiry message may be resent several times." REFERENCE "The length (in seconds) of the timer started upon transmission of a Status enquiry message. The timer is stopped upon receipt of a Status, Release, or Release complete message. If the timer expires, the Status enquiry message may be resent several times." ::= { adnAtmSigEntry 15 } adnAtmSigT398 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of a Drop party message. The timer is stopped upon receipt of a Drop party acknowledge, Add party reject, or Release message. If the timer expires, the connection is considered as cleared." REFERENCE "The length (in seconds) of the timer started upon transmission of a Drop party message. The timer is stopped upon receipt of a Drop party acknowledge, Add party reject, or Release message. If the timer expires, the connection is considered as cleared." ::= { adnAtmSigEntry 16 } adnAtmSigT399 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The length (in seconds) of the timer started upon transmission of an Add party message. The timer is stopped upon receipt of an Add party acknowledge, Add party reject, or Release message. If the timer expires, the connection is cleared." REFERENCE "The length (in seconds) of the timer started upon transmission of an Add party message. The timer is stopped upon receipt of an Add party acknowledge, Add party reject, or Release message. If the timer expires, the connection is cleared." ::= { adnAtmSigEntry 17 } adnAtmSigT331 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer is not implemented. The length (in seconds) of the timer started upon transmission of an Leaf setup request message. The timer is stopped upon receipt of a Setup, Add party, or Leaf setup failure message. The first time this timer expires, the leaf may optionally retransmit the Leaf setup request message. The second time (or the first time if the resent is not chosen) it expires, the connection is cleared." REFERENCE "This timer is not implemented. The length (in seconds) of the timer started upon transmission of an Leaf setup request message. The timer is stopped upon receipt of a Setup, Add party, or Leaf setup failure message. The first time this timer expires, the leaf may optionally retransmit the Leaf setup request message. The second time (or the first time if the resent is not chosen) it expires, the connection is cleared." ::= { adnAtmSigEntry 18 } adnAtmSigT397 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer is not implemented. The length (in seconds) of the timer started upon receipt of an Alerting, or Add party alerting message. This timer is stopped upon receipt of an Alerting acknowledge message. When the timer expires, the connection is released." REFERENCE "This timer is not implemented. The length (in seconds) of the timer started upon receipt of an Alerting, or Add party alerting message. This timer is stopped upon receipt of an Alerting acknowledge message. When the timer expires, the connection is released." ::= { adnAtmSigEntry 19 } adnAtmSigUserNetFlag OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the interface follows the user or network side of the protocol recommendations. Common Names: User or Network Side, User/Network" ::= { adnAtmSigEntry 20 } adnAtmSigCallProc OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether Call proceeding message is to be sent (by the switch) after a Setup message is received." ::= { adnAtmSigEntry 21 } adnAtmSigBrSendComp OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether broadband sending complete Information Element (IE) is to be sent (by the switch) systematically in the Setup messages." ::= { adnAtmSigEntry 22 } adnAtmSigSetupScreening OBJECT-TYPE SYNTAX AdnAtmSigScreening ACCESS read-only STATUS mandatory DESCRIPTION "Whether the calling party number Information Element (IE) of a Setup message is checked according to the administrative address associated with the interface" ::= { adnAtmSigEntry 23 } adnAtmSigDdi OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether Direct Dialing In (DDI) service is allowed." REFERENCE "Whether Direct Dialing In (DDI) service is allowed." ::= { adnAtmSigEntry 24 } adnAtmSigMsn OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether Multiple Subscriber Number (MSN) service is allowed. This service is allowed only if adnAtmInterfaceType is 'externalUni'. If the MSN is allowed, the associated addresses are included in adnAtmReachAssocAddrTable." REFERENCE "Whether Multiple Subscriber Number (MSN) service is allowed. This service is allowed only if adnAtmInterfaceType is 'externalUni'. If the MSN is allowed, the associated addresses are included in adnAtmReachAssocAddrTable." ::= { adnAtmSigEntry 25 } adnAtmSigSvccReconnect OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether reconnection User Network Interface (UNI) is allowed for switched Virtual Channel Connections (VCCs)." ::= { adnAtmSigEntry 26 } adnAtmSigCallBarring OBJECT-TYPE SYNTAX INTEGER { none(1), incoming(2), outgoing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The call barring service: - 'no': No call barring - 'incoming': Incoming Setup messages (sent by the switch) are not allowed - 'outgoing': Outgoing Setup messages (received by the switch) are not allowed." ::= { adnAtmSigEntry 27 } adnAtmSigClip OBJECT-TYPE SYNTAX INTEGER { other(1), enabledWithoutOverride(2), enabledWithOverride(3), disabled(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The Calling Line Identification Presentation (CLIP) service implementation. Whether the switch is allowed to update the calling party number and subaddress Information Elements (IEs) in each Setup message sent by the switch to the called subscriber: - 'enabledWithoutOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, according to the Presentation Indicator (PI) field value, the address field could be modified by the switch - 'enabledWithOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, whatever the PI field value the address field is transmitted in the Setup message sent - 'disabled': The calling party number and subaddress IEs are suppressed in the Setup message sent." REFERENCE "The Calling Line Identification Presentation (CLIP) service implementation. Whether the switch is allowed to update the calling party number and subaddress Information Elements (IEs) in each Setup message sent by the switch to the called subscriber: - 'enabledWithoutOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, according to the Presentation Indicator (PI) field value, the address field could be modified by the switch - 'enabledWithOverride': The calling party number IE is transmitted (or inserted if it is not present) in the Setup message sent. If the IE is present in the Setup message received, whatever the PI field value the address field is transmitted in the Setup message sent - 'disabled': The calling party number and subaddress IEs are suppressed in the Setup message sent." ::= { adnAtmSigEntry 28 } adnAtmSigClir OBJECT-TYPE SYNTAX AdnAtmSigPIUpdate ACCESS read-only STATUS mandatory DESCRIPTION "The Calling Line Identification Restriction (CLIR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the calling party number Information Element (IE) in each Setup message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber." REFERENCE "The Calling Line Identification Restriction (CLIR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the calling party number Information Element (IE) in each Setup message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber." ::= { adnAtmSigEntry 29 } adnAtmSigColp OBJECT-TYPE SYNTAX INTEGER { other(1), enabledWithoutOverride(2), enabledWithOverride(3), disabled(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The COnnected Line identification Presentation (COLP) service implementation. Whether the switch is allowed to update the connected party number and subaddress Information Elements (IEs) in each Connect message received by the switch (issued from the calling subscriber) and forwarded to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number and subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." REFERENCE "The COnnected Line identification Presentation (COLP) service implementation. Whether the switch is allowed to update the connected party number and subaddress Information Elements (IEs) in each Connect message received by the switch (issued from the calling subscriber) and forwarded to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number and subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." ::= { adnAtmSigEntry 30 } adnAtmSigColr OBJECT-TYPE SYNTAX AdnAtmSigPIUpdate ACCESS read-only STATUS mandatory DESCRIPTION "The COnnected Line identification Restriction (COLR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the connected party number Information Element (IE) in each Connect message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number ans subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." REFERENCE "The COnnected Line identification Restriction (COLR) service implementation. Whether the switch is allowed to update the Presentation Indicator (PI) field of the connected party number Information Element (IE) in each Connect message received (issued from the calling subscriber) and forwarded by the switch to the called subscriber. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the connected party number ans subaddress IEs do not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." ::= { adnAtmSigEntry 31 } adnAtmSigSub OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether SUBaddressing (SUB) service is allowed. Whether the network is allowed to transmit the called subaddress Information Element (IE) in each Setup message forwarded." REFERENCE "Whether SUBaddressing (SUB) service is allowed. Whether the network is allowed to transmit the called subaddress Information Element (IE) in each Setup message forwarded." ::= { adnAtmSigEntry 32 } adnAtmSigUus OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether User User Signalling (UUS) service is allowed. Whether the subscriber is allowed to insert the UUS Information Element (IE) in the Setup message sent. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the UUS IE does not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." REFERENCE "Whether User User Signalling (UUS) service is allowed. Whether the subscriber is allowed to insert the UUS Information Element (IE) in the Setup message sent. This object is not significant if adnAtmSigProtocol is 'atmfv31' because the UUS IE does not exist in the ATM FORUM User-Network Interface (UNI) Specification V3.1." ::= { adnAtmSigEntry 33 } adnAtmSigVpiVciAlloc OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether the VPi and VCi number are inserted in the Setup request message. This object is significant only when the switch follows the network side of the protocol recommendations. This object is significant only if adnAtmSigProtocol is 'atmfv40'. The not significant value is 'disabled'." ::= { adnAtmSigEntry 34 } adnAtmSigCniCheckingState OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), ok(2), nokUserNet(3), nokCanp(4), nokSaal(5), nokConf(6), notYetPerformed(65535) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the validity checking phase which is performed when setting an ATM trunk into service. This read-only nominator is significant only if the associated ATM interface is a trunk. Common Name: CNI validity checking" ::= { adnAtmSigEntry 35 } adnAtmSigSetupAddr OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), calledPartyNumber(2), calledPartySubAddress(3), both(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This nominator defines which addressing Information Element (IE) is used by the switch to forward a Setup received. - 'calledPartyNumber': The called party number is used to forward the call, this is the normal case - 'calledPartySubAddress': The called party subaddress is used to forward the call as defined in E191 standard. In this case, the switch replaces the called party number received by the called party subaddress and forwards the call with it. If no called party subaddress is received, the call is rejected - 'both': Depending on the content of the Setup received, the call is forwarded either with the: . called party subaddress (if present in the Setup received) . called party number if the call party subaddress is not present in the Setup received." REFERENCE "This nominator defines which addressing Information Element (IE) is used by the switch to forward a Setup received. - 'calledPartyNumber': The called party number is used to forward the call, this is the normal case - 'calledPartySubAddress': The called party subaddress is used to forward the call as defined in E191 standard. In this case, the switch replaces the called party number received by the called party subaddress and forwards the call with it. If no called party subaddress is received, the call is rejected - 'both': Depending on the content of the Setup received, the call is forwarded either with the: . called party subaddress (if present in the Setup received) . called party number if the call party subaddress is not present in the Setup received." ::= { adnAtmSigEntry 36 } adnAtmSigConnectScreening OBJECT-TYPE SYNTAX AdnAtmSigScreening ACCESS read-only STATUS mandatory DESCRIPTION "Whether the called party number Information Element (IE) of a Connect message is checked according to the administrative address associated with the interface" ::= { adnAtmSigEntry 37 } adnAtmVplTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVplEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an extension of the Virtual Path (VP) link table, described in RFC 1695." ::= { adnAtmMIBObjects 6 } adnAtmVplEntry OBJECT-TYPE SYNTAX AdnAtmVplEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the extension to the Virtual Path (VP) link table. There is one entry for each VP link." INDEX { ifIndex, atmVplVpi } ::= { adnAtmVplTable 1 } AdnAtmVplEntry ::= SEQUENCE { adnAtmVplTopology INTEGER, adnAtmVplTrafficType INTEGER, adnAtmVplType AdnAtmVlType, adnAtmVplTransferCapability AdnAtmVlTrfCapability, adnAtmVplTrafficDescrType INTEGER, adnAtmVplTrmPcrAggregate INTEGER, adnAtmVplTrmPcrClpZero INTEGER, adnAtmVplTrmScrAggregate INTEGER, adnAtmVplTrmScrClpZero INTEGER, adnAtmVplTrmMbsAggregate INTEGER, adnAtmVplTrmMbsClpZero INTEGER, adnAtmVplTrmCdvTol INTEGER, adnAtmVplTrmBwWeighting INTEGER, adnAtmVplRcvPcrAggregate INTEGER, adnAtmVplRcvPcrClpZero INTEGER, adnAtmVplRcvScrAggregate INTEGER, adnAtmVplRcvScrClpZero INTEGER, adnAtmVplRcvMbsAggregate INTEGER, adnAtmVplRcvMbsClpZero INTEGER, adnAtmVplRcvCdvTol INTEGER, adnAtmVplRcvBwWeighting INTEGER, adnAtmVplPolicing AdnAtmVlPolicing, adnAtmVplPriority INTEGER, adnAtmVplModeType INTEGER, adnAtmVplTrmAISStatus AdnAtmVlAISStatus, adnAtmVplTrmTrafficDescrType AdnAtmVlTrfDescrType, adnAtmVplTrmTagging AdnEnableDisabled, adnAtmVplTrmPacketDiscard AdnEnableDisabled, adnAtmVplRcvAISStatus AdnAtmVlAISStatus, adnAtmVplRcvTrafficDescrType AdnAtmVlTrfDescrType, adnAtmVplRcvTagging AdnEnableDisabled, adnAtmVplRcvPacketDiscard AdnEnableDisabled, adnAtmVplInternodeType INTEGER } adnAtmVplTopology OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), pointToMultipoint(2), pointToMultipointRoot(3), pointToMultipointLeaf(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The topology type of this Virtual Path Link (VPL). Common Name: Topology" ::= { adnAtmVplEntry 1 } adnAtmVplTrafficType OBJECT-TYPE SYNTAX INTEGER { userTraffic(1), networkTraffic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic carried on this Virtual Path Link (VPL). Common Name: Traffic Type" ::= { adnAtmVplEntry 2 } adnAtmVplType OBJECT-TYPE SYNTAX AdnAtmVlType ACCESS read-only STATUS mandatory DESCRIPTION "The type of this Virtual Path Link (VPL). Common Name: VPL Type" ::= { adnAtmVplEntry 3 } adnAtmVplTransferCapability OBJECT-TYPE SYNTAX AdnAtmVlTrfCapability ACCESS read-only STATUS mandatory DESCRIPTION "The ATM Transfer Capabilities (ATC) offered on this Virtual Path Link (VPL)." ::= { adnAtmVplEntry 4 } adnAtmVplTrafficDescrType OBJECT-TYPE SYNTAX INTEGER { adnAtmTrafficDescPcrCdv(1), adnAtmTrafficDescPcrCdvScrMbs(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of Virtual Path Link (VPL) traffic descriptor in the transmit and receiving direction. Depending on the value, certain traffic parameters must be initialized: - 'adnAtmTrafficDescPcrCdv': The following traffic parameters must be initialized: adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate, adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol, adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting, - 'adnAtmTrafficDescPcrCdvScrMbs': The following traffic parameters must be initialized: adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate, adnAtmVplTrmScrAggregate, adnAtmVplRcvScrAggregate, adnAtmVplTrmMbsAggregate, adnAtmVplRcvMbsAggregate, adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol, adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting." ::= { adnAtmVplEntry 5 } adnAtmVplTrmPcrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Path Link (VPL). Common Names: Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate" ::= { adnAtmVplEntry 6 } adnAtmVplTrmPcrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0" ::= { adnAtmVplEntry 7 } adnAtmVplTrmScrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate" ::= { adnAtmVplEntry 8 } adnAtmVplTrmScrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0" ::= { adnAtmVplEntry 9 } adnAtmVplTrmMbsAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1,) in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate" ::= { adnAtmVplEntry 10 } adnAtmVplTrmMbsClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0" ::= { adnAtmVplEntry 11 } adnAtmVplTrmCdvTol OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Path Link (VPL). Common Names: Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance" ::= { adnAtmVplEntry 12 } adnAtmVplTrmBwWeighting OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The weight applied to the allocated bandwidth, expressed as a percentage, in the transmit direction. Common Name: Transmit Bandwidth Weighting" ::= { adnAtmVplEntry 13 } adnAtmVplRcvPcrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate" ::= { adnAtmVplEntry 14 } adnAtmVplRcvPcrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0" ::= { adnAtmVplEntry 15 } adnAtmVplRcvScrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate" ::= { adnAtmVplEntry 16 } adnAtmVplRcvScrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0" ::= { adnAtmVplEntry 17 } adnAtmVplRcvMbsAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate" ::= { adnAtmVplEntry 18 } adnAtmVplRcvMbsClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Receive MBS CLP 0" ::= { adnAtmVplEntry 19 } adnAtmVplRcvCdvTol OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Path Link (VPL). Common Names: Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance" ::= { adnAtmVplEntry 20 } adnAtmVplRcvBwWeighting OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The weight applied to the allocated bandwidth, expressed as a percentage, in the receiving direction. Common Name: Receive Bandwidth Weighting" ::= { adnAtmVplEntry 21 } adnAtmVplPolicing OBJECT-TYPE SYNTAX AdnAtmVlPolicing ACCESS read-only STATUS mandatory DESCRIPTION "The status of the policing function applied, in the receiving direction, of this Virtual Path Link (VPL)." ::= { adnAtmVplEntry 22 } adnAtmVplPriority OBJECT-TYPE SYNTAX INTEGER { high(1), low(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The Virtual Path Link (VPL) priority level. Common Name: Priority" ::= { adnAtmVplEntry 23 } adnAtmVplModeType OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2), notsignificant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this permanent Virtual Path Link (VPL) was created automatically by ATM signalling or manually by an operator. Always 'notsignificant' for Switched Virtual Connections (SVC) and InternalVc. Common Name: Creation Mode" ::= { adnAtmVplEntry 24 } adnAtmVplTrmAISStatus OBJECT-TYPE SYNTAX AdnAtmVlAISStatus ACCESS read-only STATUS mandatory DESCRIPTION "The Alarm Indication Signal (AIS) end-to-end state, in the transmit direction, of this permanent Virtual Path Link (VPL)." ::= { adnAtmVplEntry 25 } adnAtmVplTrmTrafficDescrType OBJECT-TYPE SYNTAX AdnAtmVlTrfDescrType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Virtual Path Link (VPL) traffic descriptor in the transmit direction." ::= { adnAtmVplEntry 26 } adnAtmVplTrmTagging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Path Link (VPL)." ::= { adnAtmVplEntry 27 } adnAtmVplTrmPacketDiscard OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the transmit direction, of this Virtual Path Link (VPL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded." ::= { adnAtmVplEntry 28 } adnAtmVplRcvAISStatus OBJECT-TYPE SYNTAX AdnAtmVlAISStatus ACCESS read-only STATUS mandatory DESCRIPTION "The Alarm Indication Signal (AIS) end-to-end state, in the receiving direction, of this permanent Virtual Path Link (VPL)." ::= { adnAtmVplEntry 29 } adnAtmVplRcvTrafficDescrType OBJECT-TYPE SYNTAX AdnAtmVlTrfDescrType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Virtual Path Link (VPL) traffic descriptor in the receiving direction." ::= { adnAtmVplEntry 30 } adnAtmVplRcvTagging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Path Link (VPL)." ::= { adnAtmVplEntry 31 } adnAtmVplRcvPacketDiscard OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the receiving direction, of this Virtual Path Link (VPL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded." ::= { adnAtmVplEntry 32 } adnAtmVplInternodeType OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), rt(2), nrtAggregate(3), nrtZero(4), u(5), anyAtc(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this Virtual Path Link (VPL) is associated with an internode Virtual Path (VP) connection or not. If it is associated, indicates which traffic type can be supported for Virtual Channel Conections (VCCs) part of the internode VP. - 'notSignificant': VPL is not associated with an internode VP - 'rt': Real time traffic types - 'nrtAggregate': Non-real time traffic types with Quality Of Service (QOS) committment on aggregate traffic (Cell Loss Priority (CLP) 0+1) - 'nrtZero': Non-real time traffic types with QOS committment on CLP 0 traffic - 'u': Unspecified bit rate traffic types - 'anyAtc': Any traffic types." ::= { adnAtmVplEntry 33 } adnAtmVclTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVclEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an extension of the VC Link table, described in RFC 1695." ::= { adnAtmMIBObjects 7 } adnAtmVclEntry OBJECT-TYPE SYNTAX AdnAtmVclEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VC Link extension table. There is one entry for each VC link." INDEX { ifIndex, atmVclVpi, atmVclVci } ::= { adnAtmVclTable 1 } AdnAtmVclEntry ::= SEQUENCE { adnAtmVclTopology INTEGER, adnAtmVclTrafficType INTEGER, adnAtmVclType AdnAtmVlType, adnAtmVclTransferCapability AdnAtmVlTrfCapability, adnAtmVclTrafficDescrType INTEGER, adnAtmVclTrmPcrAggregate INTEGER, adnAtmVclTrmPcrClpZero INTEGER, adnAtmVclTrmScrAggregate INTEGER, adnAtmVclTrmScrClpZero INTEGER, adnAtmVclTrmMbsAggregate INTEGER, adnAtmVclTrmMbsClpZero INTEGER, adnAtmVclTrmCdvTol INTEGER, adnAtmVclTrmBwWeighting INTEGER, adnAtmVclRcvPcrAggregate INTEGER, adnAtmVclRcvPcrClpZero INTEGER, adnAtmVclRcvScrAggregate INTEGER, adnAtmVclRcvScrClpZero INTEGER, adnAtmVclRcvMbsAggregate INTEGER, adnAtmVclRcvMbsClpZero INTEGER, adnAtmVclRcvCdvTol INTEGER, adnAtmVclRcvBwWeighting INTEGER, adnAtmVclPolicing AdnAtmVlPolicing, adnAtmVclPriority INTEGER, adnAtmVclModeType INTEGER, adnAtmVclTrmAISStatus AdnAtmVlAISStatus, adnAtmVclTrmTrafficDescrType AdnAtmVlTrfDescrType, adnAtmVclTrmTagging AdnEnableDisabled, adnAtmVclTrmPacketDiscard AdnEnableDisabled, adnAtmVclRcvAISStatus AdnAtmVlAISStatus, adnAtmVclRcvTrafficDescrType AdnAtmVlTrfDescrType, adnAtmVclRcvTagging AdnEnableDisabled, adnAtmVclRcvPacketDiscard AdnEnableDisabled, adnAtmVclLogLineType INTEGER } adnAtmVclTopology OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), pointToMultipoint(2), pointToMultipointRoot(3), pointToMultipointLeaf(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The topology type of this Virtual Channel Link (VCL). Common Name: Topology" ::= { adnAtmVclEntry 1 } adnAtmVclTrafficType OBJECT-TYPE SYNTAX INTEGER { userTraffic(1), networkTraffic(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic carried on this Virtual Channel Link (VCL). Common Name: Traffic Type" ::= { adnAtmVclEntry 2 } adnAtmVclType OBJECT-TYPE SYNTAX AdnAtmVlType ACCESS read-only STATUS mandatory DESCRIPTION "The type of this Virtual Channel Link (VCL). Common Name: VCL Type" ::= { adnAtmVclEntry 3 } adnAtmVclTransferCapability OBJECT-TYPE SYNTAX AdnAtmVlTrfCapability ACCESS read-only STATUS mandatory DESCRIPTION "The ATM Transfer Capabilities (ATC) offered on this Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 4 } adnAtmVclTrafficDescrType OBJECT-TYPE SYNTAX INTEGER { adnAtmTrafficDescPcrCdv(1), adnAtmTrafficDescPcrCdvScrMbs(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of Virtual Channel Link (VCL) traffic descriptor in the transmit and receiving direction. Depending on the value, certain traffic parameters must be initialized: - 'adnAtmTrafficDescPcrCdv': The following traffic parameters must be initialized: adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate, adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol, adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting, - 'adnAtmTrafficDescPcrCdvScrMbs': The following traffic parameters must be initialized: adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate, adnAtmVclTrmScrAggregate, adnAtmVclRcvScrAggregate, adnAtmVclTrmMbsAggregate, adnAtmVclRcvMbsAggregate, adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol, adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting. Common Name: Traffic Descriptor" ::= { adnAtmVclEntry 5 } adnAtmVclTrmPcrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate" ::= { adnAtmVclEntry 6 } adnAtmVclTrmPcrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0" ::= { adnAtmVclEntry 7 } adnAtmVclTrmScrAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate" ::= { adnAtmVclEntry 8 } adnAtmVclTrmScrClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0" ::= { adnAtmVclEntry 9 } adnAtmVclTrmMbsAggregate OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate" ::= { adnAtmVclEntry 10 } adnAtmVclTrmMbsClpZero OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0" ::= { adnAtmVclEntry 11 } adnAtmVclTrmCdvTol OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance" ::= { adnAtmVclEntry 12 } adnAtmVclTrmBwWeighting OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The weight applied to the allocated bandwidth, expressed as a percentage, in the transmit direction. Common Name: Transmit Bandwidth Weighting" ::= { adnAtmVclEntry 13 } adnAtmVclRcvPcrAggregate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate" ::= { adnAtmVclEntry 14 } adnAtmVclRcvPcrClpZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0" ::= { adnAtmVclEntry 15 } adnAtmVclRcvScrAggregate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate" ::= { adnAtmVclEntry 16 } adnAtmVclRcvScrClpZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0" ::= { adnAtmVclEntry 17 } adnAtmVclRcvMbsAggregate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate" ::= { adnAtmVclEntry 18 } adnAtmVclRcvMbsClpZero OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Cell Priority (CLP) 0, Receive MBS CLP 0" ::= { adnAtmVclEntry 19 } adnAtmVclRcvCdvTol OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance" ::= { adnAtmVclEntry 20 } adnAtmVclRcvBwWeighting OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-only STATUS deprecated DESCRIPTION "The weight applied to the allocated bandwidth, expressed as a percentage, in the receiving direction. Common Name: Receive Bandwidth Weighting" ::= { adnAtmVclEntry 21 } adnAtmVclPolicing OBJECT-TYPE SYNTAX AdnAtmVlPolicing ACCESS read-only STATUS mandatory DESCRIPTION "The status of the policing function applied, in the receiving direction, of this Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 22 } adnAtmVclPriority OBJECT-TYPE SYNTAX INTEGER { high(1), low(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The Virtual Channel Link (VCL) priority level. Common Name: Priority" ::= { adnAtmVclEntry 23 } adnAtmVclModeType OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2), notSignificant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether this permanent Virtual Channel Link (VCL) was created automatically by ATM signalling or manually by an operator. Always 'notSignificant' for Switched Virtual Connections (SVC) and InternalVc. Common Name: Creation Mode" ::= { adnAtmVclEntry 24 } adnAtmVclTrmAISStatus OBJECT-TYPE SYNTAX AdnAtmVlAISStatus ACCESS read-only STATUS mandatory DESCRIPTION "The Alarm Indication Signal (AIS) end-to-end state, in the transmit direction, of this permanent Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 25 } adnAtmVclTrmTrafficDescrType OBJECT-TYPE SYNTAX AdnAtmVlTrfDescrType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Virtual Channel Link (VCL) traffic descriptor in the transmit direction." ::= { adnAtmVclEntry 26 } adnAtmVclTrmTagging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 27 } adnAtmVclTrmPacketDiscard OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the transmit direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded." ::= { adnAtmVclEntry 28 } adnAtmVclRcvAISStatus OBJECT-TYPE SYNTAX AdnAtmVlAISStatus ACCESS read-only STATUS mandatory DESCRIPTION "The Alarm Indication Signal (AIS) end-to-end state, in the receiving direction, of this permanent Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 29 } adnAtmVclRcvTrafficDescrType OBJECT-TYPE SYNTAX AdnAtmVlTrfDescrType ACCESS read-only STATUS mandatory DESCRIPTION "The type of Virtual Channel Link (VCL) traffic descriptor in the receiving direction." ::= { adnAtmVclEntry 30 } adnAtmVclRcvTagging OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Channel Link (VCL)." ::= { adnAtmVclEntry 31 } adnAtmVclRcvPacketDiscard OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the receiving direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded." ::= { adnAtmVclEntry 32 } adnAtmVclLogLineType OBJECT-TYPE SYNTAX INTEGER { other(1), franpOverAtm(2), netIWsc2OneToOne(3), netIWsc2ManyToOne(4), netIWsc1(5), serIW(6), issc(7), notSignificant(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of service using the frame relay logical line: - franpOverAtm: FRANP truncking over ATM - netIWsc2OneToOne: Network interworking scenario 2 with each Fame Relay (FR) connection mapped to a single ATM Virtual Channel Connection (VCC) - netIWsc2ManyToOne: Network interworking scenario 2 with multiple FR connections multiplexed into a single ATM VCC - netIWsc1: Network interworking scenario 1 - serIW: Service interworking - issc: NMS-ISS connection over ATM. Common Name: Logical Line Type" ::= { adnAtmVclEntry 33 } adnAtmUniVpCconnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmUniVpCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM User Network Interface (UNI) Virtual Path cross-connect table." ::= { adnAtmMIBObjects 8 } adnAtmUniVpCconnectEntry OBJECT-TYPE SYNTAX AdnAtmUniVpCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the User Network Interface (UNI) Virtual Path cross-connect table. There is one entry for each User Network Interface/Network Network Interface (UNI/NNI) Virtual Path (VP) cross-connection. An entry describes both the local cross-connection and the end-to-end cross-connection." INDEX { ifIndex, atmVplVpi, adnAtmUniVpCconnectIndex } ::= { adnAtmUniVpCconnectTable 1 } AdnAtmUniVpCconnectEntry ::= SEQUENCE { adnAtmUniVpCconnectIndex INTEGER, adnAtmUniVpCconnectOutIfIndex InterfaceIndex, adnAtmUniVpCconnectOutVpi INTEGER, adnAtmUniVpCconnectOutCcnIndex INTEGER, adnAtmUniVpCconnectAdminStatus AdnAtmAdminStatus, adnAtmUniVpCconnectOperStatus AdnAtmUniOperStatus, adnAtmUniVpCconnectSourceDest AdnAtmUniSourceDest, adnAtmUniVpCconnectStatistics INTEGER, adnAtmUniVpCconnectDirectedPath AdnAtmDirectedPath, adnAtmUniVpCconnectRetryAttempts INTEGER, adnAtmUniVpCconnectFastRetry INTEGER, adnAtmUniVpCconnectSlowRetry INTEGER, adnAtmUniVpCconnectRemNumPlan AdnAtmNumPlan, adnAtmUniVpCconnectRemPhysAddress PhysAddress, adnAtmUniVpCconnectRemVpi INTEGER, adnAtmUniVpCconnectRemCcnIndex INTEGER, adnAtmUniVpCconnectRemRoutingNodeId AdnRoutingID, adnAtmUniVpCconnectCumulNodes INTEGER, adnAtmUniVpCconnectMaxTransitDelay INTEGER, adnAtmUniVpCconnectCharging INTEGER, adnAtmUniVpCconnectCumulTD INTEGER, adnAtmUniVpCconnectCumulMonetaryCst INTEGER, adnAtmUniVpCconnectCauseError INTEGER, adnAtmUniVpCconnectLastCanpCause INTEGER, adnAtmUniVpCconnectLastErrorNodeID AdnRoutingID, adnAtmUniVpCconnectLastLocation INTEGER, adnAtmUniVpCconnectLastCause INTEGER, adnAtmUniVpCconnectLastDiag INTEGER, adnAtmUniVpCconnectRemNodeMacNum INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectRemNodeAreaNum INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectErrorNodeMacNum INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectErrorNodeAreaNum INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectLastChassis INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectLastSlot INTEGER (-2147483648..2147483647), adnAtmUniVpCconnectMaxHops INTEGER, adnAtmUniVpCconnectPvcDescr DisplayString } adnAtmUniVpCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the cross-connection for the Virtual Path Connection (VPC) on this interface. The index is 0 for a point-to-point cross-connection. There is a different index for each leaf in a point-to-multipoint cross-connection. Common Name: Cross-connection Index" ::= { adnAtmUniVpCconnectEntry 1 } adnAtmUniVpCconnectOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the output ATM interface from this node." ::= { adnAtmUniVpCconnectEntry 2 } adnAtmUniVpCconnectOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmUniVpCconnectOutIfIndex, this VPI can be used for path tracing." ::= { adnAtmUniVpCconnectEntry 3 } adnAtmUniVpCconnectOutCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cross-connection index of this output Virtual Path Identifier (VPI) of the output ATM interface from this node. This can be combined with adnAtmUniVpCconnectOutIfIndex and adnAtmUniVpCconnectOutVpi and used for call tracing." ::= { adnAtmUniVpCconnectEntry 4 } adnAtmUniVpCconnectAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS read-write STATUS mandatory DESCRIPTION "The current administrative status of this Virtual Path (VP) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VP cross-connection is operational." ::= { adnAtmUniVpCconnectEntry 5 } adnAtmUniVpCconnectOperStatus OBJECT-TYPE SYNTAX AdnAtmUniOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current Virtual Path Connection (VPC) call attempt state." ::= { adnAtmUniVpCconnectEntry 6 } adnAtmUniVpCconnectSourceDest OBJECT-TYPE SYNTAX AdnAtmUniSourceDest ACCESS read-only STATUS mandatory DESCRIPTION "Whether this is the source or destination side of the virtual cross-connection." ::= { adnAtmUniVpCconnectEntry 7 } adnAtmUniVpCconnectStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useInterfaceValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether statistics are enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics" ::= { adnAtmUniVpCconnectEntry 8 } adnAtmUniVpCconnectDirectedPath OBJECT-TYPE SYNTAX AdnAtmDirectedPath ACCESS read-write STATUS mandatory DESCRIPTION "Whether this Virtual Path Connection (VPC) uses a directed path." ::= { adnAtmUniVpCconnectEntry 9 } adnAtmUniVpCconnectRetryAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of call attempts to make at the fast rate (adnAtmUniVpCconnectFastRetry) before slowing the call attempt rate to adnAtmUniVpCconnectSlowRetry. The current attempt state is in adnAtmUniVpCconnectOperStatus. This object is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc' and adnAtmVplModeType is 'automatic'. Common Name: Retry Attempts at Fast Rate" ::= { adnAtmUniVpCconnectEntry 10 } adnAtmUniVpCconnectFastRetry OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the fast rate. After attempting setups at this rate for adnAtmUniVpCconnectCRetryAttempts times, the rate slows to the adnAtmUniVpCconnectSlowRetry rate. This object is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc', and adnAtmVplModeType is 'automatic'. Common Name: Wait Time between Fast Retries" ::= { adnAtmUniVpCconnectEntry 11 } adnAtmUniVpCconnectSlowRetry OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the slow rate. After attempting setups at the adnAtmUniVpCconnectFastRetry rate for adnAtmUniVpCconnectRetryAttempts times, the rate slows to the adnAtmUniVpCconnectSlowRetry rate. This is significant only if adnAtmUniVpCconnectSourceDest is 'source', adnAtmVplType is 'pvc', and adnAtmVplModeType is 'automatic'. Common Name: Wait Time between Slow Retries" ::= { adnAtmUniVpCconnectEntry 12 } adnAtmUniVpCconnectRemNumPlan OBJECT-TYPE SYNTAX AdnAtmNumPlan ACCESS read-only STATUS mandatory DESCRIPTION "The numbering plan of the remote User Network Interface (UNI) for the current Virtual Path (VP) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan" REFERENCE "The numbering plan of the remote User Network Interface (UNI) for the current Virtual Path (VP) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan" ::= { adnAtmUniVpCconnectEntry 13 } adnAtmUniVpCconnectRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote Address" ::= { adnAtmUniVpCconnectEntry 14 } adnAtmUniVpCconnectRemVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote VPI" ::= { adnAtmUniVpCconnectEntry 15 } adnAtmUniVpCconnectRemCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the remote User Network Interface/Network Network Interface (UNI/NNI) cross-connection for the current Virtual Path (VP) cross-connection. Common Name: Remote Cross-connection Index" ::= { adnAtmUniVpCconnectEntry 16 } adnAtmUniVpCconnectRemRoutingNodeId OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the node connecting the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Path (VP) cross-connection. Common Name: Remote Node Identifier" ::= { adnAtmUniVpCconnectEntry 17 } adnAtmUniVpCconnectCumulNodes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of nodes in the connection. If adnAtmUniVpCconnectOperStatus is 'callup', this is the current nodes count; otherwise, it is the nodes count for the last connection. Common Name: Number of Nodes" ::= { adnAtmUniVpCconnectEntry 18 } adnAtmUniVpCconnectMaxTransitDelay OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed transit delay of this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'. In case of 'svc', the maximum transit delay is defined per interface or could be defined in an Information Element If set to 0, the value defined per interface is used." ::= { adnAtmUniVpCconnectEntry 19 } adnAtmUniVpCconnectCharging OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3), useInterfaceValue(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether charging is enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the charging status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used." ::= { adnAtmUniVpCconnectEntry 20 } adnAtmUniVpCconnectCumulTD OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The current cumulative transit delay of this Virtual Path (VP) cross-connection." ::= { adnAtmUniVpCconnectEntry 21 } adnAtmUniVpCconnectCumulMonetaryCst OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current cumulative monetary cost of this Virtual Path (VP) cross-connection." ::= { adnAtmUniVpCconnectEntry 22 } adnAtmUniVpCconnectCauseError OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), maxCallAttempts(2), configurationError(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Global cause of the cross-connect failure." ::= { adnAtmUniVpCconnectEntry 23 } adnAtmUniVpCconnectLastCanpCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Last Cell Alcatel Network Protocol (CANP) cause. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 24 } adnAtmUniVpCconnectLastErrorNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the node detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 25 } adnAtmUniVpCconnectLastLocation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." REFERENCE "ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 26 } adnAtmUniVpCconnectLastCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." REFERENCE "ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 27 } adnAtmUniVpCconnectLastDiag OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." REFERENCE "ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 28 } adnAtmUniVpCconnectRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmUniVpCconnectRemRoutingNodeID." ::= { adnAtmUniVpCconnectEntry 29 } adnAtmUniVpCconnectRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmUniVpCconnectRemRoutingNodeID." ::= { adnAtmUniVpCconnectEntry 30 } adnAtmUniVpCconnectErrorNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmUniVpCconnectLastErrorNodeID." ::= { adnAtmUniVpCconnectEntry 31 } adnAtmUniVpCconnectErrorNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmUniVpCconnectLastErrorNodeID." ::= { adnAtmUniVpCconnectEntry 32 } adnAtmUniVpCconnectLastChassis OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The chassis number detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 33 } adnAtmUniVpCconnectLastSlot OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the board detecting the error. This nominator, which is read only, is not significant if adnAtmUniVpCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVpCconnectEntry 34 } adnAtmUniVpCconnectMaxHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed number of hops of this Virtual Path (VP) cross-connection. If set to 65535, the value defined at node level is used. Common Name: Number of hops" ::= { adnAtmUniVpCconnectEntry 35 } adnAtmUniVpCconnectPvcDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the Permanent Virtual Connection (PVC) description inserted in each charging ticket generated for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'." ::= { adnAtmUniVpCconnectEntry 36 } adnAtmCniVpCconnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmCniVpCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Path (VP) cross-connect table on the inter-node ATM interfaces (Cell alcatel Network protocol Interfaces (CNIs))." ::= { adnAtmMIBObjects 9 } adnAtmCniVpCconnectEntry OBJECT-TYPE SYNTAX AdnAtmCniVpCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Cell alcatel Network protocol Interface (CNI) Virtual Path (VP) cross-connect table. There is one entry for each VP cross-connection on a CNI." INDEX { ifIndex, atmVplVpi, adnAtmCniVpCconnectIndex } ::= { adnAtmCniVpCconnectTable 1 } AdnAtmCniVpCconnectEntry ::= SEQUENCE { adnAtmCniVpCconnectIndex INTEGER, adnAtmCniVpCconnectOutIfIndex InterfaceIndex, adnAtmCniVpCconnectOutVpi INTEGER, adnAtmCniVpCconnectOutCcnIndex INTEGER, adnAtmCniVpCconnectAdminStatus AdnAtmAdminStatus, adnAtmCniVpCconnectOperStatus AdnAtmCniOperStatus, adnAtmCniVpCconnectSourceDest AdnAtmCniSourceDest, adnAtmCniVpCconnectStatistics INTEGER, adnAtmCniVpCconnectDirectedPath AdnAtmDirectedPath } adnAtmCniVpCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the cross-connection for the Virtual Path Connection (VPC) on this interface. In a point-to-point cross-connection, the index equals 0." ::= { adnAtmCniVpCconnectEntry 1 } adnAtmCniVpCconnectOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of this node's output ATM interface." ::= { adnAtmCniVpCconnectEntry 2 } adnAtmCniVpCconnectOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmCniVpCconnectOutIfIndex, this can be used for path tracing." ::= { adnAtmCniVpCconnectEntry 3 } adnAtmCniVpCconnectOutCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cross-connection index of the output Virtual Path Identifier (VPI) of this node's output ATM interface. This index can be used with adnAtmCniVpCconnectOutIfIndex and adnAtmCniVpCconnectOutVpi for call tracing." ::= { adnAtmCniVpCconnectEntry 4 } adnAtmCniVpCconnectAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current administrative status of this Virtual Path (VP) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VP cross-connection is operational." ::= { adnAtmCniVpCconnectEntry 5 } adnAtmCniVpCconnectOperStatus OBJECT-TYPE SYNTAX AdnAtmCniOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current Virtual Path Connection (VPC) call attempt state." ::= { adnAtmCniVpCconnectEntry 6 } adnAtmCniVpCconnectSourceDest OBJECT-TYPE SYNTAX AdnAtmCniSourceDest ACCESS read-only STATUS mandatory DESCRIPTION "Whether this is the source or destination side of the cross-connection." ::= { adnAtmCniVpCconnectEntry 7 } adnAtmCniVpCconnectStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useInterfaceValue(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether statistics are enabled for this Virtual Path (VP) cross-connection. This object is significant only if the type of the Virtual Path Link (VPL), specified by adnAtmVplType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics" ::= { adnAtmCniVpCconnectEntry 8 } adnAtmCniVpCconnectDirectedPath OBJECT-TYPE SYNTAX AdnAtmDirectedPath ACCESS read-only STATUS mandatory DESCRIPTION "Whether this Virtual Path Connection (VPC) uses a directed path." ::= { adnAtmCniVpCconnectEntry 9 } adnAtmUniVcCconnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmUniVcCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM User Network Interface (UNI) Virtual Channel cross-connect table." ::= { adnAtmMIBObjects 10 } adnAtmUniVcCconnectEntry OBJECT-TYPE SYNTAX AdnAtmUniVcCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM User Network Interface (UNI) Virtual Channel (VC) cross-connect table. There is one entry for each UNI VC cross-connection. An entry describes both the local cross-connection and the end-to-end cross-connection." INDEX { ifIndex, atmVclVpi, atmVclVci, adnAtmUniVcCconnectIndex } ::= { adnAtmUniVcCconnectTable 1 } AdnAtmUniVcCconnectEntry ::= SEQUENCE { adnAtmUniVcCconnectIndex INTEGER, adnAtmUniVcCconnectOutIfIndex InterfaceIndex, adnAtmUniVcCconnectOutVpi INTEGER, adnAtmUniVcCconnectOutVci INTEGER, adnAtmUniVcCconnectOutCcnIndex INTEGER, adnAtmUniVcCconnectAdminStatus AdnAtmAdminStatus, adnAtmUniVcCconnectOperStatus AdnAtmUniOperStatus, adnAtmUniVcCconnectSourceDest AdnAtmUniSourceDest, adnAtmUniVcCconnectStatistics INTEGER, adnAtmUniVcCconnectDirectedPath AdnAtmDirectedPath, adnAtmUniVcCconnectRetryAttempts Counter, adnAtmUniVcCconnectFastRetry INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectSlowRetry INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectRemNumPlan AdnAtmNumPlan, adnAtmUniVcCconnectRemPhysAddress PhysAddress, adnAtmUniVcCconnectRemVpi INTEGER, adnAtmUniVcCconnectRemVci INTEGER, adnAtmUniVcCconnectRemCcnIndex INTEGER, adnAtmUniVcCconnectRemRoutingNodeId AdnRoutingID, adnAtmUniVcCconnectCumulNodes INTEGER, adnAtmUniVcCconnectMaxTransitDelay INTEGER, adnAtmUniVcCconnectCharging INTEGER, adnAtmUniVcCconnectCumulTD INTEGER, adnAtmUniVcCconnectCumulMonetaryCst INTEGER, adnAtmUniVcCconnectCauseError INTEGER, adnAtmUniVcCconnectLastCanpCause INTEGER, adnAtmUniVcCconnectLastErrorNodeID AdnRoutingID, adnAtmUniVcCconnectLastLocation INTEGER, adnAtmUniVcCconnectLastCause INTEGER, adnAtmUniVcCconnectLastDiag INTEGER, adnAtmUniVcCconnectRemNodeMacNum INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectRemNodeAreaNum INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectErrorNodeMacNum INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectErrorNodeAreaNum INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectLastChassis INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectLastSlot INTEGER (-2147483648..2147483647), adnAtmUniVcCconnectPvcDescr DisplayString } adnAtmUniVcCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the cross-connection for the Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals zero. In a point-to- -multipoint cross-connection, there is a different index for each leaf. Common Name: Cross-connection Index" ::= { adnAtmUniVcCconnectEntry 1 } adnAtmUniVcCconnectOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of this node's output ATM interface." ::= { adnAtmUniVcCconnectEntry 2 } adnAtmUniVcCconnectOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmUniVcCconnectOutIfIndex, this VPI can be used for path tracing." ::= { adnAtmUniVcCconnectEntry 3 } adnAtmUniVcCconnectOutVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) of this node's output interface. This cross-connection exits the node on another VCI. This value can be combined with adnAtmUniVcCconnectOutIfIndex and adnAtmUniVcCconnectOutVpi and used for call tracing." ::= { adnAtmUniVcCconnectEntry 4 } adnAtmUniVcCconnectOutCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cross-connection index of the output Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) of this node's output interface. This value can be combined with adnAtmUniVcCconnectOutIfIndex, adnAtmUniVcCconnectOutVpi, and adnAtmUniVcCconnectOutVci and used for call tracing." ::= { adnAtmUniVcCconnectEntry 5 } adnAtmUniVcCconnectAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS read-write STATUS mandatory DESCRIPTION "The current administrative status of this Virtual Channel (VC) cross-connection. The 'up' and 'down' states specify whether or not this ATM VC cross-connection is operational." ::= { adnAtmUniVcCconnectEntry 6 } adnAtmUniVcCconnectOperStatus OBJECT-TYPE SYNTAX AdnAtmUniOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current Virtual Channel Connection (VCC) call attempt state." ::= { adnAtmUniVcCconnectEntry 7 } adnAtmUniVcCconnectSourceDest OBJECT-TYPE SYNTAX AdnAtmUniSourceDest ACCESS read-only STATUS mandatory DESCRIPTION "Whether this is the source or destination side of the virtual cross-connection." ::= { adnAtmUniVcCconnectEntry 8 } adnAtmUniVcCconnectStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useInterfaceValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether statistics are enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics" ::= { adnAtmUniVcCconnectEntry 9 } adnAtmUniVcCconnectDirectedPath OBJECT-TYPE SYNTAX AdnAtmDirectedPath ACCESS read-write STATUS mandatory DESCRIPTION "Whether this Virtual Channel Connection (VCC) uses a directed path." ::= { adnAtmUniVcCconnectEntry 10 } adnAtmUniVcCconnectRetryAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of call attempts to make at the fast rate (adnAtmUniVcCconnectFastRetry) before slowing the call attempt rate to adnAtmUniVcCconnectSlowRetry. adnAtmUniVcCconnectOperStatus specifies the current attempt state. This object is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Retry Attempts at Fast Rate" ::= { adnAtmUniVcCconnectEntry 11 } adnAtmUniVcCconnectFastRetry OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the fast rate. After making attempts at this rate the number of times specified by adnAtmUniVcCconnectCRetryAttempts, the rate slows to adnAtmUniVcCconnectSlowRetry. This is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Wait Time between Fast Retries" ::= { adnAtmUniVcCconnectEntry 12 } adnAtmUniVcCconnectSlowRetry OBJECT-TYPE SYNTAX INTEGER -- UNITS minutes ACCESS read-only STATUS mandatory DESCRIPTION "This timer specifies the amount of time to wait between failed Permanent Virtual Connection (PVC) setup attempts at the slow rate. After making attempts at the adnAtmUniVcCconnectFastRetry rate the number of times specified by adnAtmUniVcCconnectRetryAttempts, the rate slows to this rate. This object is significant only if adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is 'pvc', and adnAtmVclModeType is 'automatic'. Common Name: Wait Time between Slow Retries" ::= { adnAtmUniVcCconnectEntry 13 } adnAtmUniVcCconnectRemNumPlan OBJECT-TYPE SYNTAX AdnAtmNumPlan ACCESS read-only STATUS mandatory DESCRIPTION "The numbering plan of the remote User Network Interface (UNI) for the current Virtual Channel (VC) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan" REFERENCE "The numbering plan of the remote User Network Interface (UNI) for the current Virtual Channel (VC) cross-connection. Common Names: Remote Numbering Plan, Rem Num Plan" ::= { adnAtmUniVcCconnectEntry 14 } adnAtmUniVcCconnectRemPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The address of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Address" ::= { adnAtmUniVcCconnectEntry 15 } adnAtmUniVcCconnectRemVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Virtual Path Identifier (VPI)" ::= { adnAtmUniVcCconnectEntry 16 } adnAtmUniVcCconnectRemVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) value of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote Virtual Channel Identifier (VCI)" ::= { adnAtmUniVcCconnectEntry 17 } adnAtmUniVcCconnectRemCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value of the current Virtual Channel (VC) cross-connection's remote User Network Interface/Network Network Interface (UNI/NNI). Common Name: Remote UNI Cross-Connection Index" ::= { adnAtmUniVcCconnectEntry 18 } adnAtmUniVcCconnectRemRoutingNodeId OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the node connecting the remote User Network Interface/Network Network Interface (UNI/NNI) for the current Virtual Channel (VC) cross-connection. Common Name: Remote Node Identifier" ::= { adnAtmUniVcCconnectEntry 19 } adnAtmUniVcCconnectCumulNodes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of nodes in the connection. If adnAtmUniVcCconnectOperStatus is 'callup', this is the current nodes count; otherwise, it is the nodes count for the last connection. Common Name: Number of Nodes" ::= { adnAtmUniVcCconnectEntry 20 } adnAtmUniVcCconnectMaxTransitDelay OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum allowed transit delay of this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVplType, is set to 'pvc'. In case of 'svc', the maximum transit delay is defined per interface or could be defined in an Information Element If set to 0, the value defined per interface is used." ::= { adnAtmUniVcCconnectEntry 21 } adnAtmUniVcCconnectCharging OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3), useInterfaceValue(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether charging is enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the charging status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used." ::= { adnAtmUniVcCconnectEntry 22 } adnAtmUniVcCconnectCumulTD OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The current cumulative transit delay of this Virtual Channel (VC) cross-connection." ::= { adnAtmUniVcCconnectEntry 23 } adnAtmUniVcCconnectCumulMonetaryCst OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current cumulative monetary cost of this Virtual Channel (VC) cross-connection." ::= { adnAtmUniVcCconnectEntry 24 } adnAtmUniVcCconnectCauseError OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), maxCallAttempts(2), configurationError(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Global cause of the cross-connect failure." ::= { adnAtmUniVcCconnectEntry 25 } adnAtmUniVcCconnectLastCanpCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Last Cell Alcatel Network Protocol (CANP) cause. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVcCconnectEntry 26 } adnAtmUniVcCconnectLastErrorNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the node detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVcCconnectEntry 27 } adnAtmUniVcCconnectLastLocation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." REFERENCE "ATM forum location value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVcCconnectEntry 28 } adnAtmUniVcCconnectLastCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'." REFERENCE "ATM forum cause value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'." ::= { adnAtmUniVcCconnectEntry 29 } adnAtmUniVcCconnectLastDiag OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'." REFERENCE "ATM forum diagnostic value in the cause information element. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notsignificant'." ::= { adnAtmUniVcCconnectEntry 30 } adnAtmUniVcCconnectRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmUniVpCconnectRemRoutingNodeID." ::= { adnAtmUniVcCconnectEntry 31 } adnAtmUniVcCconnectRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmUniVcCconnectRemRoutingNodeID." ::= { adnAtmUniVcCconnectEntry 32 } adnAtmUniVcCconnectErrorNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmUniVcCconnectLastErrorNodeID." ::= { adnAtmUniVcCconnectEntry 33 } adnAtmUniVcCconnectErrorNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmUniVcCconnectLastErrorNodeID." ::= { adnAtmUniVcCconnectEntry 34 } adnAtmUniVcCconnectLastChassis OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The chassis number detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVcCconnectEntry 35 } adnAtmUniVcCconnectLastSlot OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the board detecting the error. This nominator, which is read only, is not significant if adnAtmUniVcCconnectCauseError is equal to 'notSignificant'." ::= { adnAtmUniVcCconnectEntry 36 } adnAtmUniVcCconnectPvcDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the Permanent Virtual Connection (PVC) description inserted in each charging ticket generated for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'." ::= { adnAtmUniVcCconnectEntry 37 } adnAtmCniVcCconnectTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmCniVcCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Channel (VC) cross-connect table for the inter-node ATM interfaces (Cell alcatel Network protocol Interfaces (CNIs))." ::= { adnAtmMIBObjects 11 } adnAtmCniVcCconnectEntry OBJECT-TYPE SYNTAX AdnAtmCniVcCconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Cell alcatel Network protocol Interface (CNI) Virtual Channel (VC) cross-connect table. There is one entry for each VC cross-connection on a CNI." INDEX { ifIndex, atmVclVpi, atmVclVci, adnAtmCniVcCconnectIndex } ::= { adnAtmCniVcCconnectTable 1 } AdnAtmCniVcCconnectEntry ::= SEQUENCE { adnAtmCniVcCconnectIndex INTEGER, adnAtmCniVcCconnectOutIfIndex InterfaceIndex, adnAtmCniVcCconnectOutVpi INTEGER, adnAtmCniVcCconnectOutVci INTEGER, adnAtmCniVcCconnectOutCcnIndex INTEGER, adnAtmCniVcCconnectAdminStatus AdnAtmAdminStatus, adnAtmCniVcCconnectOperStatus AdnAtmCniOperStatus, adnAtmCniVcCconnectSourceDest AdnAtmCniSourceDest, adnAtmCniVcCconnectStatistics INTEGER, adnAtmCniVcCconnectDirectedPath AdnAtmDirectedPath } adnAtmCniVcCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the cross-connection for this Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals 0." ::= { adnAtmCniVcCconnectEntry 1 } adnAtmCniVcCconnectOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the output ATM interface from this node." ::= { adnAtmCniVcCconnectEntry 2 } adnAtmCniVcCconnectOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmCniVcCconnectOutIfIndex, this VPI can be used for path tracing." ::= { adnAtmCniVcCconnectEntry 3 } adnAtmCniVcCconnectOutVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) of this node's output interface. This cross-connection exits this node on another VCI. This value can be combined with adnAtmCniVcCconnectOutIfIndex and adnAtmCniVcCconnectOutVpi and used for call tracing." ::= { adnAtmCniVcCconnectEntry 4 } adnAtmCniVcCconnectOutCcnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cross-connection index of the Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) of this node's output interface. This value can be used for call tracing if combined with adnAtmCniVcCconnectOutIfIndex, adnAtmCniVcCconnectOutVpi, and adnAtmCniVcCconnectOutVci." ::= { adnAtmCniVcCconnectEntry 5 } adnAtmCniVcCconnectAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current administrative status of this Virtual Channel (VC) cross-connection. The 'up' and 'down' states indicate whether or not this ATM VC cross-connection is operational." ::= { adnAtmCniVcCconnectEntry 6 } adnAtmCniVcCconnectOperStatus OBJECT-TYPE SYNTAX AdnAtmCniOperStatus ACCESS read-only STATUS mandatory DESCRIPTION "The current Virtual Channel Connection (VCC) call attempt state." ::= { adnAtmCniVcCconnectEntry 7 } adnAtmCniVcCconnectSourceDest OBJECT-TYPE SYNTAX AdnAtmCniSourceDest ACCESS read-only STATUS mandatory DESCRIPTION "Whether this is the source or destination side of the cross-connection." ::= { adnAtmCniVcCconnectEntry 8 } adnAtmCniVcCconnectStatistics OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), useInterfaceValue(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether statistics are enabled for this Virtual Channel (VC) cross-connection. This object is significant only if the type of the Virtual Channel Link (VCL), specified by adnAtmVclType, is set to 'pvc'; otherwise, the statistics status is defined per interface. If set to 'useInterfaceValue', the value defined per interface is used. Common Name: Statistics" ::= { adnAtmCniVcCconnectEntry 9 } adnAtmCniVcCconnectDirectedPath OBJECT-TYPE SYNTAX AdnAtmDirectedPath ACCESS read-only STATUS mandatory DESCRIPTION "Whether this Virtual Channel Connection (VCC) uses a directed path." ::= { adnAtmCniVcCconnectEntry 10 } adnAtmVpcDirRoutTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVpcDirRoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the directed path, used to set up point-to-point permanent Virtual Path Connections (VPCs). A directed path is composed of a list of node identifier and outgoing line identifiers. This table is configured only in the origin node of the cross-connection. The path between the origin and the destination node could be partly or completely described by the list, but it is only used if adnAtmUniVpCconnectDirectedPath is set to 'enabled'." ::= { adnAtmMIBObjects 12 } adnAtmVpcDirRoutEntry OBJECT-TYPE SYNTAX AdnAtmVpcDirRoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVpcDirRoutTable. There is one entry for each element of each list specifing a directed path." INDEX { ifIndex, atmVplVpi, adnAtmUniVpCconnectIndex, adnAtmVpcDirRoutIndex } ::= { adnAtmVpcDirRoutTable 1 } AdnAtmVpcDirRoutEntry ::= SEQUENCE { adnAtmVpcDirRoutIndex INTEGER, adnAtmVpcDirRoutNodeId AdnRoutingID, adnAtmVpcDirRoutOutChassis INTEGER, adnAtmVpcDirRoutOutSlot INTEGER, adnAtmVpcDirRoutOutLine INTEGER (-2147483648..2147483647), adnAtmVpcDirRoutFlag AdnAtmDirRoutFlag, adnAtmVpcDirRoutNodeMacNum INTEGER (-2147483648..2147483647), adnAtmVpcDirRoutNodeAreaNum INTEGER (-2147483648..2147483647) } adnAtmVpcDirRoutIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of an element in the list of this Virtual Path Connection (VPC)." ::= { adnAtmVpcDirRoutEntry 1 } adnAtmVpcDirRoutNodeId OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the next node to be used to reach the destination node, for this Virtual Path Connection (VPC)." ::= { adnAtmVpcDirRoutEntry 2 } adnAtmVpcDirRoutOutChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The chassis number, within the current node, supporting the line used to reach the next node, specified by adnAtmVpcDirRoutNodeId." ::= { adnAtmVpcDirRoutEntry 3 } adnAtmVpcDirRoutOutSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number, within the current node, supporting the line used to reach the next node, specified by adnAtmVpcDirRoutNodeId." ::= { adnAtmVpcDirRoutEntry 4 } adnAtmVpcDirRoutOutLine OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The line number, within the current node, used to reach the next node, specified by adnAtmVpcDirRoutNodeId." ::= { adnAtmVpcDirRoutEntry 5 } adnAtmVpcDirRoutFlag OBJECT-TYPE SYNTAX AdnAtmDirRoutFlag ACCESS read-only STATUS mandatory DESCRIPTION "Whether only the outgoing line specified must be used to reach the next node or not." ::= { adnAtmVpcDirRoutEntry 6 } adnAtmVpcDirRoutNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmVpcDirRoutNodeID." ::= { adnAtmVpcDirRoutEntry 7 } adnAtmVpcDirRoutNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmVpcDirRoutNodeID." ::= { adnAtmVpcDirRoutEntry 8 } adnAtmVccDirRoutTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVccDirRoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the directed path, used to set up point-to-point permanent Virtual Channel Connections (VPCs). A directed path is composed of a list of node identifier and outgoing line identifiers. This table is configured only in the origin node of the cross-connection. The path between the origin and the destination node could be partly or completely described by the list, but it is only used if adnAtmUniVcCconnectDirectedPath is set to 'enabled'." ::= { adnAtmMIBObjects 13 } adnAtmVccDirRoutEntry OBJECT-TYPE SYNTAX AdnAtmVccDirRoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVccDirRoutTable. There is one entry for each element of each list specifing a directed path." INDEX { ifIndex, atmVclVpi, atmVclVci, adnAtmUniVcCconnectIndex, adnAtmVccDirRoutIndex } ::= { adnAtmVccDirRoutTable 1 } AdnAtmVccDirRoutEntry ::= SEQUENCE { adnAtmVccDirRoutIndex INTEGER, adnAtmVccDirRoutNodeId AdnRoutingID, adnAtmVccDirRoutOutChassis INTEGER, adnAtmVccDirRoutOutSlot INTEGER, adnAtmVccDirRoutOutLine INTEGER (-2147483648..2147483647), adnAtmVccDirRoutFlag AdnAtmDirRoutFlag, adnAtmVccDirRoutNodeMacNum INTEGER (-2147483648..2147483647), adnAtmVccDirRoutNodeAreaNum INTEGER (-2147483648..2147483647) } adnAtmVccDirRoutIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of an element in the list of this Virtual Channel Connection (VCC)." ::= { adnAtmVccDirRoutEntry 1 } adnAtmVccDirRoutNodeId OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "The identifier of the next node to be used to reach the destination node, for this Virtual Channel Connection (VCC)." ::= { adnAtmVccDirRoutEntry 2 } adnAtmVccDirRoutOutChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The chassis number, within the current node, supporting the line used to reach the next node, specified by adnAtmVccDirRoutNodeId." ::= { adnAtmVccDirRoutEntry 3 } adnAtmVccDirRoutOutSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number, within the current node, supporting the line used to reach the next node, specified by adnAtmVccDirRoutNodeId." ::= { adnAtmVccDirRoutEntry 4 } adnAtmVccDirRoutOutLine OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The line number, within the current node, used to reach the next node, specified by adnAtmVccDirRoutNodeId." ::= { adnAtmVccDirRoutEntry 5 } adnAtmVccDirRoutFlag OBJECT-TYPE SYNTAX AdnAtmDirRoutFlag ACCESS read-only STATUS mandatory DESCRIPTION "Whether only the outgoing line specified must be used to reach the next node or not." ::= { adnAtmVccDirRoutEntry 6 } adnAtmVccDirRoutNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnAtmVccDirRoutNodeID." ::= { adnAtmVccDirRoutEntry 7 } adnAtmVccDirRoutNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnAtmVccDirRoutNodeID." ::= { adnAtmVccDirRoutEntry 8 } adnAtmReachAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmReachAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains either: - The list of prefix addresses which can be reached through the Interim Inter-switch Signalling Protocol (IISP) link supported by the associated ATM interface. Each prefix entry may be associated with a list of addresses specified in the AdnAtmReachAssocAddrTable - The list of complete addresses registered with Interim Local Management Interface (ILMI) or configured if the Multiple Subscriber Number (MSN) service is offered." ::= { adnAtmMIBObjects 14 } adnAtmReachAddrEntry OBJECT-TYPE SYNTAX AdnAtmReachAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmReachAddrTable. There is one entry for each element of the list." INDEX { ifIndex, adnAtmReachAddrIndex } ::= { adnAtmReachAddrTable 1 } AdnAtmReachAddrEntry ::= SEQUENCE { adnAtmReachAddrIndex INTEGER, adnAtmReachAddrNumPlan AdnAtmNumPlan, adnAtmReachAddrNumberLength INTEGER, adnAtmReachAddrNumber PhysAddress, adnAtmReachAddrAssocIndex INTEGER } adnAtmReachAddrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of an element in the list." ::= { adnAtmReachAddrEntry 1 } adnAtmReachAddrNumPlan OBJECT-TYPE SYNTAX AdnAtmNumPlan ACCESS read-only STATUS mandatory DESCRIPTION "The number plan of the prefix or complete address specified in adnAtmReachAddrNumber. Common Names: Numbering Plan, Num Plan" REFERENCE "The number plan of the prefix or complete address specified in adnAtmReachAddrNumber. Common Names: Numbering Plan, Num Plan" ::= { adnAtmReachAddrEntry 2 } adnAtmReachAddrNumberLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of digits of the prefix address specified in adnAtmReachAddrNumber. If adnAtmReachAddrNumPlan is set to 'private', a digit size is equal to half a byte otherwise it is equal to one byte." ::= { adnAtmReachAddrEntry 3 } adnAtmReachAddrNumber OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The prefix address which can be reached through the Interim Inter-switch Signalling Protocol (IISP) link supported by the associated ATM interface or the complete address registered with Interim Local Management Interface (ILMI) or configured if the Multiple Subscriber Number (MSN) service is offered." ::= { adnAtmReachAddrEntry 4 } adnAtmReachAddrAssocIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the list of the associated addresses in the adnAtmReachAssocAddrTable. This object could be significant only if the associated ATM interface support an Interim Inter-switch Signalling Protocol (IISP) link. Not significant value (65535) indicates that there is no associated address in adnAtmReachAssocAddrTable." ::= { adnAtmReachAddrEntry 5 } adnAtmReachAssocAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmReachAssocAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the lists of associated addresses of prefix addresses described in the adnAtmReachAddrTable." ::= { adnAtmMIBObjects 15 } adnAtmReachAssocAddrEntry OBJECT-TYPE SYNTAX AdnAtmReachAssocAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmReachAssocAddrTable. There is one entry for each element of each list." INDEX { ifIndex, adnAtmReachAssocAddrIndex, adnAtmReachAssocAddrNumIndex } ::= { adnAtmReachAssocAddrTable 1 } AdnAtmReachAssocAddrEntry ::= SEQUENCE { adnAtmReachAssocAddrIndex INTEGER, adnAtmReachAssocAddrNumIndex INTEGER, adnAtmReachAssocAddrNumPlan AdnAtmNumPlan, adnAtmReachAssocAddrAddress PhysAddress } adnAtmReachAssocAddrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of a list in the table." ::= { adnAtmReachAssocAddrEntry 1 } adnAtmReachAssocAddrNumIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of an element in a list." ::= { adnAtmReachAssocAddrEntry 2 } adnAtmReachAssocAddrNumPlan OBJECT-TYPE SYNTAX AdnAtmNumPlan ACCESS read-only STATUS mandatory DESCRIPTION "The number plan of the associated address specified by adnAtmReachAssocAddrAddress. Common Names: Numbering Plan, Num Plan" REFERENCE "The number plan of the associated address specified by adnAtmReachAssocAddrAddress. Common Names: Numbering Plan, Num Plan" ::= { adnAtmReachAssocAddrEntry 3 } adnAtmReachAssocAddrAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The associated address used to transit through an other network which has not the same number plan." ::= { adnAtmReachAssocAddrEntry 4 } adnAtmInterfacePerfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmInterfacePerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains counters related to the ATM interface." ::= { adnAtmMIBObjects 16 } adnAtmInterfacePerfEntry OBJECT-TYPE SYNTAX AdnAtmInterfacePerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmInterfacePerfTable. There is one entry for each ATM interface." INDEX { ifIndex } ::= { adnAtmInterfacePerfTable 1 } AdnAtmInterfacePerfEntry ::= SEQUENCE { adnAtmInterfacePerfTrmAllocBwVpiForVcc Counter, adnAtmInterfacePerfRcvAllocBwVpiForVcc Counter, adnAtmInterfacePerfTrmAllocBwVpcs Counter, adnAtmInterfacePerfRcvAllocBwVpcs Counter, adnAtmInterfacePerfTrmAllocBwVccs Counter, adnAtmInterfacePerfRcvAllocBwVccs Counter, adnAtmInterfacePerfPPtpVpcs Counter, adnAtmInterfacePerfSPtpVpcs Counter, adnAtmInterfacePerfPPtmRootVpcs Counter, adnAtmInterfacePerfSPtmRootVpcs Counter, adnAtmInterfacePerfPPtmLeafVpcs Counter, adnAtmInterfacePerfSPtmLeafVpcs Counter } adnAtmInterfacePerfTrmAllocBwVpiForVcc OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the transmit direction, for all Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs). If all VPIs dedicated to VCCs have no bandwidth limitation (adnAtmVpiVccTrmBandwidth = 0), this counter equals 0." ::= { adnAtmInterfacePerfEntry 1 } adnAtmInterfacePerfRcvAllocBwVpiForVcc OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the receiving direction, for all Virtual Path Identifiers (VPIs) dedicated to Virtual Channel Connections (VCCs). If all VPIs dedicated to VCCs have no bandwidth limitation (adnAtmVpiVccRcvBandwidth = 0), this counter equals 0." ::= { adnAtmInterfacePerfEntry 2 } adnAtmInterfacePerfTrmAllocBwVpcs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the transmit direction, for all Virtual Path Connections (VPCs) created on this ATM interface." ::= { adnAtmInterfacePerfEntry 3 } adnAtmInterfacePerfRcvAllocBwVpcs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the receiving direction, for all Virtual Path Connections (VPCs) created on this ATM interface." ::= { adnAtmInterfacePerfEntry 4 } adnAtmInterfacePerfTrmAllocBwVccs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the transmit direction, for all Virtual Channel Connections (VCCs) having a Virtual Path Identifier (VPI) with no bandwidth limiation, created on this ATM interface." ::= { adnAtmInterfacePerfEntry 5 } adnAtmInterfacePerfRcvAllocBwVccs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the receiving direction, for all Virtual Channel Connections (VCCs) having a Virtual Path Identifier (VPI) with no bandwidth limiation, created on this ATM interface." ::= { adnAtmInterfacePerfEntry 6 } adnAtmInterfacePerfPPtpVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-point Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 7 } adnAtmInterfacePerfSPtpVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-point Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 8 } adnAtmInterfacePerfPPtmRootVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-multipoint root Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 9 } adnAtmInterfacePerfSPtmRootVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-multipoint root Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 10 } adnAtmInterfacePerfPPtmLeafVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-multipoint leaf Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 11 } adnAtmInterfacePerfSPtmLeafVpcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-multipoint leaf Virtual Path Connections (VPCs) on this ATM interface." ::= { adnAtmInterfacePerfEntry 12 } adnAtmVpiVccPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVpiVccPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains counters related to the Virtual Channel Link (VCL) of each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface." ::= { adnAtmMIBObjects 17 } adnAtmVpiVccPerfEntry OBJECT-TYPE SYNTAX AdnAtmVpiVccPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVpiVccPerfTable. There is one entry for each Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs) on an ATM interface." INDEX { ifIndex, adnAtmVpiVccIndex } ::= { adnAtmVpiVccPerfTable 1 } AdnAtmVpiVccPerfEntry ::= SEQUENCE { adnAtmVpiVccPerfTrmAllocBwVccs Counter, adnAtmVpiVccPerfRcvAllocBwVccs Counter, adnAtmVpiVccPerfPPtpVccs Counter, adnAtmVpiVccPerfSPtpVccs Counter, adnAtmVpiVccPerfPPtmRootVccs Counter, adnAtmVpiVccPerfSPtmRootVccs Counter, adnAtmVpiVccPerfPPtmLeafVccs Counter, adnAtmVpiVccPerfSPtmLeafVccs Counter } adnAtmVpiVccPerfTrmAllocBwVccs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the transmit direction, for all Virtual Channel Connections (VCCs).If the VPI dedicated to VCCs has no bandwidth limitation, this counter equals 0 and the allocated bandwidth is accounted in the counter adnAtmInterfacePerfTrmAllocBwVccs." ::= { adnAtmVpiVccPerfEntry 1 } adnAtmVpiVccPerfRcvAllocBwVccs OBJECT-TYPE SYNTAX Counter -- UNITS bit/secs ACCESS read-only STATUS mandatory DESCRIPTION "The allocated bandwidth, in the receiving direction, for all Virtual Channel Connections (VCCs).If the VPI dedicated to VCCs has no bandwidth limitation, this counter equals 0 and the allocated bandwidth is accounted in the counter adnAtmInterfacePerfRcvAllocBwVccs." ::= { adnAtmVpiVccPerfEntry 2 } adnAtmVpiVccPerfPPtpVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-point Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 3 } adnAtmVpiVccPerfSPtpVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-point Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 4 } adnAtmVpiVccPerfPPtmRootVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-multipoint root Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 5 } adnAtmVpiVccPerfSPtmRootVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-multipoint root Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 6 } adnAtmVpiVccPerfPPtmLeafVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent point-to-multipoint leaf Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 7 } adnAtmVpiVccPerfSPtmLeafVccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switched point-to-multipoint leaf Virtual Channel Connections (VCCs) on this Virtual Path Identifier (VPI) dedicated to Virtual Channel Connections (VCCs)." ::= { adnAtmVpiVccPerfEntry 8 } adnAtmVplPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVplPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains counters relative to each Virtual Path Link (VPL)." ::= { adnAtmMIBObjects 18 } adnAtmVplPerfEntry OBJECT-TYPE SYNTAX AdnAtmVplPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVplPerfTable. There is one entry for each Virtual Path Link (VPL)." INDEX { ifIndex, atmVplVpi } ::= { adnAtmVplPerfTable 1 } AdnAtmVplPerfEntry ::= SEQUENCE { adnAtmVplPerfRcvCellForwarded Counter, adnAtmVplPerfRcvCellDiscarded Counter, adnAtmVplPerfRcvCellVsaANonConform Counter, adnAtmVplPerfRcvCellVsaBNonConform Counter, adnAtmVplPerfRcvCellTagged Counter } adnAtmVplPerfRcvCellForwarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received and forwarded (after police processing) on the Virtual Path Link (VPL)." ::= { adnAtmVplPerfEntry 1 } adnAtmVplPerfRcvCellDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Path Link (VPL) and discarded by the police processing." ::= { adnAtmVplPerfEntry 2 } adnAtmVplPerfRcvCellVsaANonConform OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Path Link (VPL) and declared non conform by the Virtual Scheduling Algorithm (VSA) A of the police processing. This object is significant only if the VSA A is enabled. The VSA A is enabled or not according to the ATM Transfer Capability (ATC) of the VPL." ::= { adnAtmVplPerfEntry 3 } adnAtmVplPerfRcvCellVsaBNonConform OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Path Link (VPL) and declared non conform by the Virtual Scheduling Algorithm (VSA) B of the police processing. Whatever the ATM Transfer Capability (ATC) of the VPL, the VSA B is always enabled." ::= { adnAtmVplPerfEntry 4 } adnAtmVplPerfRcvCellTagged OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Path Link (VPL) and tagged by the police processing. This object is significant only if the tagging option is enabled on the VPL." ::= { adnAtmVplPerfEntry 5 } adnAtmVclPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmVclPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains counters relative to each Virtual Channel Link (VCL)." ::= { adnAtmMIBObjects 19 } adnAtmVclPerfEntry OBJECT-TYPE SYNTAX AdnAtmVclPerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmVclPerfTable. There is one entry for each Virtual Channel Link (VCL)." INDEX { ifIndex, atmVclVpi, atmVclVci } ::= { adnAtmVclPerfTable 1 } AdnAtmVclPerfEntry ::= SEQUENCE { adnAtmVclPerfRcvCellForwarded Counter, adnAtmVclPerfRcvCellDiscarded Counter, adnAtmVclPerfRcvCellVsaANonConform Counter, adnAtmVclPerfRcvCellVsaBNonConform Counter, adnAtmVclPerfRcvCellTagged Counter } adnAtmVclPerfRcvCellForwarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received and forwarded (after police processing) on the Virtual Channel Link (VCL)." ::= { adnAtmVclPerfEntry 1 } adnAtmVclPerfRcvCellDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Channel Link (VCL) and discarded by the police processing." ::= { adnAtmVclPerfEntry 2 } adnAtmVclPerfRcvCellVsaANonConform OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Channel Link (VCL) and declared non conform by the Virtual Scheduling Algorithm (VSA) A of the police processing. This object is significant only if the VSA A is enabled. The VSA A is enabled or not according to the ATM Transfer Capability (ATC) of the VCL." ::= { adnAtmVclPerfEntry 3 } adnAtmVclPerfRcvCellVsaBNonConform OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Channel Link (VCL) and declared non conform by the Virtual Scheduling Algorithm (VSA) B of the police processing. Whatever the ATM Transfer Capability (ATC) of the VCL, the VSA B is always enabled." ::= { adnAtmVclPerfEntry 4 } adnAtmVclPerfRcvCellTagged OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of cells received on the Virtual Channel Link (VCL) and tagged by the police processing. This object is significant only if the tagging option is enabled on the VCL." ::= { adnAtmVclPerfEntry 5 } adnAtmAal5PerfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmAal5PerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the extension of the aal5VCCTable, described in RFC 1695. This table contains ATM Adaptation Layer 5 (AAL5) performance counters." ::= { adnAtmMIBObjects 20 } adnAtmAal5PerfEntry OBJECT-TYPE SYNTAX AdnAtmAal5PerfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnAtmAal5PerfTable. There is one entry for each ATM Adaptation Layer 5 (AAL5) Virtual Channel Connection (VCC)." INDEX { ifIndex, atmVclVpi, atmVclVci } ::= { adnAtmAal5PerfTable 1 } AdnAtmAal5PerfEntry ::= SEQUENCE { adnAtmAal5PerfLengthErrors Counter, adnAtmAal5PerfCpiErrors Counter } adnAtmAal5PerfLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ATM Adaptation Layer 5 (AAL5) Common Part Convergence Sublayer (CPCS) PDUs discarded on this Virtual Channel Link (VCL) because the value of the length field in the PDU trailer is not consistent with the actual PDU payload length." ::= { adnAtmAal5PerfEntry 1 } adnAtmAal5PerfCpiErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ATM Adaptation Layer 5 (AAL5) Common Part Convergence Sublayer (CPCS) PDUs discarded on this Virtual Channel Link (VCL) because the value of the Common Part Interface (CPI) field in the PDU trailer is not 0." ::= { adnAtmAal5PerfEntry 2 } adnFRAIWMIB OBJECT IDENTIFIER ::= { adnProprietary 17 } adnFRAIWConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFRAIWConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the configuration parameters of the frame relay (FR) logical line. There is one entry for each FR logical line." ::= { adnFRAIWMIB 1 } adnFRAIWConfEntry OBJECT-TYPE SYNTAX AdnFRAIWConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnFRAIWConfTable. There is one entry for each frame relay logical line." INDEX { ifIndex } ::= { adnFRAIWConfTable 1 } AdnFRAIWConfEntry ::= SEQUENCE { adnFRAIWConfIUNIifIndex InterfaceIndex, adnFRAIWConfVpi INTEGER, adnFRAIWConfVci INTEGER, adnFRAIWConfLogLineType INTEGER, adnFRAIWConfAalType INTEGER, adnFRAIWConfInitCLP INTEGER, adnFRAIWConfTrapEnable AdnEnableDisabled, adnFRAIWConfStatisticsEnable AdnEnableDisabled, adnFRAIWConfSegmPcr INTEGER, adnFRAIWConfSegmScr INTEGER, adnFRAIWConfSegmMbs INTEGER, adnFRAIWConfCosRtOutOctets Counter, adnFRAIWConfCosRtOutPkts Counter, adnFRAIWConfCosRtOutErrors Counter, adnFRAIWConfCosNrtOutOctets Counter, adnFRAIWConfCosNrtOutPkts Counter, adnFRAIWConfCosNrtOutErrors Counter } adnFRAIWConfIUNIifIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the internal user to network interface (I-UNI) bearing the ATM virtual channel connection (VCC) associated with this frame relay logical line. Common Name: I-UNI ifIndex" ::= { adnFRAIWConfEntry 1 } adnFRAIWConfVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The virtual path identifier (VPI) of the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common Name: Virtual Path Identifier, VPI" ::= { adnFRAIWConfEntry 2 } adnFRAIWConfVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The virtual connection identifier (VCI) of the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common name: Virtual Channel Identifier, VCI" ::= { adnFRAIWConfEntry 3 } adnFRAIWConfLogLineType OBJECT-TYPE SYNTAX INTEGER { other(1), franpOverAtm(2), netIWsc2OneToOne(3), netIWsc2ManyToOne(4), netIWsc1(5), serIW(6), issc(7), ipfw(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of service using the frame relay logical line: - franpOverATM : FRANP trunking over ATM - netIWsc1 : network interworking scenario 1 (defined by FRF.5) - netIWsc2OneToOne : network interworking scenario 2 with each FR connection mapped to a single ATM virtual channel connection (defined by FRF.5) - netIWsc2ManyToOne: network interworking scenario 2 with multiple FR connections multiplexed into a single ATM virtual channel connection (defined by FRF.5) - serIW : service interworking (defined by FRF.8) - issc : NMS-ISS connection over ATM - ipfw : IP Forwarding service Common Name: Logical Line Type" ::= { adnFRAIWConfEntry 4 } adnFRAIWConfAalType OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal34(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of ATM Adaptation Layer used on the ATM virtual channel connection (VCC) bearing the frame relay logical line. Common Name: ATM Adaptation Layer" ::= { adnFRAIWConfEntry 5 } adnFRAIWConfInitCLP OBJECT-TYPE SYNTAX INTEGER { mode1(1), mode20(2), mode21(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The segmentation process of every frame for the frame relay logical line generates ATM cells. This variable defines how the cell loss priority (CLP) bit for each of those cells is initialized. The names of the valid values are borrowed from the Frame Relay Forum implementation agreements concerning FR/ATM interworking (FRF.5 and FRF.8): - mode1 : The discard eligibility bit in the Q.922 core frame is copied to the CLP bit. - mode20 : Every ATM cell's CLP bit is set to zero. This mode is the only one allowed if the FR logical line is bearing a FRANP trunk or an ISS connection. - mode21 : Every ATM cell's CLP bit is set to one. This mode is the only one allowed if the FR logical line is bearing an IP forwarding connection. Common Name: Cell Loss Priority Bit" ::= { adnFRAIWConfEntry 6 } adnFRAIWConfTrapEnable OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if trap generation is enabled on the frame relay logical line in case of reception of an over-sized AAL Service Data Unit. Common Name: Trap" ::= { adnFRAIWConfEntry 7 } adnFRAIWConfStatisticsEnable OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "This indicates if historical statistics generation is enabled on the frame relay logical line. Common Name: Statistics" ::= { adnFRAIWConfEntry 8 } adnFRAIWConfSegmPcr OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) of the ATM flow generated on the logical line by the segmentation process of frames. Common name: Segmentation Peak Cell Rate (PCR)" ::= { adnFRAIWConfEntry 9 } adnFRAIWConfSegmScr OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Sustainable Cell Rate (SCR) of the ATM flow generated on the logical line by the segmentation process of frames when the segmentation process generates a variable bit rate flow. When the segmentation process generates a constant bit rate flow, the segmentation SCR is set to 0. Common name: Segmentation Sustainable Cell Rate (SCR)" ::= { adnFRAIWConfEntry 10 } adnFRAIWConfSegmMbs OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of cells transmitted at the Peak Cell Rate (PCR) in the ATM flow generated on the logical line when the segmentation process generates a variable bit rate flow. When the segmentation process generates a constant bit rate flow, the segmentation maximum burst size is set to 0. Common name: Segmentation Maximum Burst Size (MBS)" ::= { adnFRAIWConfEntry 11 } adnFRAIWConfCosRtOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Class 1 Octets transmitted by aafd." ::= { adnFRAIWConfEntry 12 } adnFRAIWConfCosRtOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Class 1 packets (frame or subframes) transmitted by aafd." ::= { adnFRAIWConfEntry 13 } adnFRAIWConfCosRtOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of errors while transmitting Class 1 data by aafd." ::= { adnFRAIWConfEntry 14 } adnFRAIWConfCosNrtOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Class 2 Octets transmitted by aafd." ::= { adnFRAIWConfEntry 15 } adnFRAIWConfCosNrtOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Class 2 packets (frame or subframes) transmitted by aafd." ::= { adnFRAIWConfEntry 16 } adnFRAIWConfCosNrtOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of errors while transmitting Class 2 data by aafd." ::= { adnFRAIWConfEntry 17 } adnFrAtmSerIWTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnFrAtmSerIWEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the parameters of the frame relay (FR) logical line. There is one entry for each FR logical line bearing service interworking." ::= { adnFRAIWMIB 2 } adnFrAtmSerIWEntry OBJECT-TYPE SYNTAX AdnFrAtmSerIWEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the adnFrAtmSerIWTable. There is one entry for each frame relay logical line bearing service interworking." INDEX { ifIndex } ::= { adnFrAtmSerIWTable 1 } AdnFrAtmSerIWEntry ::= SEQUENCE { adnFrAtmSerIWInitEFCI INTEGER, adnFrAtmSerIWInitDE INTEGER, adnFrAtmSerIWEncapsMode INTEGER, adnFrAtmSerIWAddrDLCI INTEGER, adnFrAtmSerIWUserN391 INTEGER, adnFrAtmSerIWUserN392 INTEGER, adnFrAtmSerIWUserN393 INTEGER, adnFrAtmSerIWUserT391 INTEGER, adnFrAtmSerIWNetN392 INTEGER, adnFrAtmSerIWNetN393 INTEGER, adnFrAtmSerIWNetT392 INTEGER } adnFrAtmSerIWInitEFCI OBJECT-TYPE SYNTAX INTEGER { mode1(1), mode2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The segmentation process of every frame for the frame relay logical line generates ATM cells. This variable defines how the explicit forward congestion indication (EFCI) bit for each of those cells is initialized. The names of the valid values are borrowed from the Frame Relay Forum implementation agreement concerning FR/ATM service interworking (FRF.8): - mode1 : The FECN bit in the Q.922 core frame is copied to the EFCI bit. - mode2 : Every ATM cell's EFCI bit is set to zero. Common Name: Explicit Forward Congestion Indication Bit" ::= { adnFrAtmSerIWEntry 1 } adnFrAtmSerIWInitDE OBJECT-TYPE SYNTAX INTEGER { mode20(1), mode21(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This variable defines how the discard eligibility (DE) bit for each frame reassembled from cells is initialized on a FR logical line used for service interworking. The names of the valid values are borrowed from the Frame Relay Forum implementation agreement concerning FR/ATM service interworking (FRF.8): - mode20 : The DE bit is set to zero. - mode21 : The DE bit is set to one. Common Name: Discard Eligibility Bit" ::= { adnFrAtmSerIWEntry 2 } adnFrAtmSerIWEncapsMode OBJECT-TYPE SYNTAX INTEGER { transparent(1), translation(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The way to handle the upper layer user protocol encapsulation on the frame relay logical line: - transparent : the encapsulations are forwarded unaltered. No fragmentation/reassembly is performed. - translation : The mapping between RFC1490 and RFC1483 is performed. No fragmentation/reassembly is performed. Common Name: Encapsulation Mode" ::= { adnFrAtmSerIWEntry 3 } adnFrAtmSerIWAddrDLCI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the DLCI used for this FR logical line when forwarding a frame to the FR layer. The value of this object is always equal to 16. This value is used when configuring the FR PVC of the FR access on top of this logical line. Common Name: DLCI" ::= { adnFrAtmSerIWEntry 4 } adnFrAtmSerIWUserN391 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the User-side N391 full status polling cycle value for this logical port. Common Name: userN391" ::= { adnFrAtmSerIWEntry 5 } adnFrAtmSerIWUserN392 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the User-side N392 error threshold value for this logical port. Common Name: userN392" ::= { adnFrAtmSerIWEntry 6 } adnFrAtmSerIWUserN393 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the User-side N393 monitored events count value for this logical port. Common Name: userN393" ::= { adnFrAtmSerIWEntry 7 } adnFrAtmSerIWUserT391 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the User-side T391 link integrity verification polling timer value for this logical port. Common Name: userT391" ::= { adnFrAtmSerIWEntry 8 } adnFrAtmSerIWNetN392 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the Network- side N392 error threshold value for this logical port. Common Name: NetN392" ::= { adnFrAtmSerIWEntry 9 } adnFrAtmSerIWNetN393 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the Network- side N393 monitored events count value for this logical port. Common Name: NetN393" ::= { adnFrAtmSerIWEntry 10 } adnFrAtmSerIWNetT392 OBJECT-TYPE SYNTAX INTEGER -- UNITS seconds ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object identifies the Network- side T392 polling verification timer value for this logical port. Common Name: NetT392" ::= { adnFrAtmSerIWEntry 11 } adnUCNodeErrorsSfas OBJECT IDENTIFIER ::= { adnUCNodeErrors 1 } adnUCNodeErrorsSfasInternalErr OBJECT IDENTIFIER ::= { adnUCNodeErrorsSfas 1 } adnUCNodeErrorsNmgs OBJECT IDENTIFIER ::= { adnUCNodeErrors 2 } adnUCNodeErrorsNmgsInvalidEvent OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 1 } adnUCNodeErrorsNmgsTimingProblem OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 2 } adnUCNodeErrorsNmgsSoftwareError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 3 } adnUCNodeErrorsNmgsTooLongSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 4 } adnUCNodeErrorsNmgsNullInmpSend OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 10 } adnUCNodeErrorsNmgsInmpSend OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 11 } adnUCNodeErrorsNmgsControlBlock OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 12 } adnUCNodeErrorsNmgsPfxiAccess OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 13 } adnUCNodeErrorsNmgsStatusRequest OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 14 } adnUCNodeErrorsNmgsNoFullConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 15 } adnUCNodeErrorsNmgsNoDelta OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 16 } adnUCNodeErrorsNmgsNoRollback OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 17 } adnUCNodeErrorsNmgsBoardStatus OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 18 } adnUCNodeErrorsNmgsLoadFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 19 } adnUCNodeErrorsNmgsTransList OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 20 } adnUCNodeErrorsNmgsEventState OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 30 } adnUCNodeErrorsNmgsTimeout OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 31 } adnUCNodeErrorsNmgsProcResetRequest OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 50 } adnUCNodeErrorsNmgsProcStatusRequest OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 51 } adnUCNodeErrorsNmgsProcNoSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 52 } adnUCNodeErrorsNmgsSllOpen OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 53 } adnUCNodeErrorsNmgsNoDownloadCmdFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 54 } adnUCNodeErrorsNmgsUndefFileInSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 55 } adnUCNodeErrorsNmgsSendSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 56 } adnUCNodeErrorsNmgsNoSmiFileStatus OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 57 } adnUCNodeErrorsNmgsBadSwInd OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 58 } adnUCNodeErrorsNmgsDataSetError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 59 } adnUCNodeErrorsNmgsBadFwSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 60 } adnUCNodeErrorsNmgsBadFwInd OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 61 } adnUCNodeErrorsNmgsProcDown OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 62 } adnUCNodeErrorsNmgsGeneralError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 69 } adnUCNodeErrorsNmgsLocNoSuchInstance OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 70 } adnUCNodeErrorsNmgsLocNoSuchService OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 71 } adnUCNodeErrorsNmgsLocError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 72 } adnUCNodeErrorsNmgsIacsSend OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 73 } adnUCNodeErrorsNmgsBadPfxiFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 74 } adnUCNodeErrorsNmgsLocQaFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 75 } adnUCNodeErrorsNmgsFwDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 201 } adnUCNodeErrorsNmgsFwSll OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 202 } adnUCNodeErrorsNmgsFwDupFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 203 } adnUCNodeErrorsNmgsFwOpenFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 204 } adnUCNodeErrorsNmgsNoFwInv OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 205 } adnUCNodeErrorsNmgsUncomAvail OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 210 } adnUCNodeErrorsNmgsUncomRunning OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 211 } adnUCNodeErrorsNmgsScriptFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 212 } adnUCNodeErrorsNmgsCopyError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 213 } adnUCNodeErrorsNmgsSysError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 214 } adnUCNodeErrorsNmgsCleanDir OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 215 } adnUCNodeErrorsNmgsFileError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 216 } adnUCNodeErrorsNmgsInstallDsError OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 217 } adnUCNodeErrorsNmgsDeleteBrd OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 218 } adnUCNodeErrorsNmgsMergeDelta OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 219 } adnUCNodeErrorsNmgsCuSw OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 220 } adnUCNodeErrorsNmgsBrdSw OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 221 } adnUCNodeErrorsNmgsCuConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 222 } adnUCNodeErrorsNmgsBrdConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 223 } adnUCNodeErrorsNmgsSfasMib OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 224 } adnUCNodeErrorsNmgsBkupNeCuCodeDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 225 } adnUCNodeErrorsNmgsBkupNeCuConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 226 } adnUCNodeErrorsNmgsBkupBrdConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 227 } adnUCNodeErrorsNmgsBkupPrCodeDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 228 } adnUCNodeErrorsNmgsBkupCuCodeFl OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 229 } adnUCNodeErrorsNmgsBkupCuConfFl OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 230 } adnUCNodeErrorsNmgsBkupBrdConfFl OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 231 } adnUCNodeErrorsNmgsBkupPrCodeFl OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 232 } adnUCNodeErrorsNmgsAllCuConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 233 } adnUCNodeErrorsNmgsReplCuConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 234 } adnUCNodeErrorsNmgsReplSfasMibDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 235 } adnUCNodeErrorsNmgsAppCuCodeDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 236 } adnUCNodeErrorsNmgsAppCuDataDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 237 } adnUCNodeErrorsNmgsWriteCuCodeDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 238 } adnUCNodeErrorsNmgsBkupCuCodeDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 239 } adnUCNodeErrorsNmgsAppCuSwDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 240 } adnUCNodeErrorsNmgsUpdBrdConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 241 } adnUCNodeErrorsNmgsAllBrdConfDs OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 242 } adnUCNodeErrorsNmgsDupFwInv OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 300 } adnUCNodeErrorsNmgsNotOnUptList OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 301 } adnUCNodeErrorsNmgsNoDldCmdFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 302 } adnUCNodeErrorsNmgsTooManySwp OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 303 } adnUCNodeErrorsNmgsNoFwInvFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 304 } adnUCNodeErrorsNmgsNoSrliFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 305 } adnUCNodeErrorsNmgsNoSllFile OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 350 } adnUCNodeErrorsNmgsDeclareSm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 400 } adnUCNodeErrorsNmgsInstallSm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 401 } adnUCNodeErrorsNmgsDelcareCm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 402 } adnUCNodeErrorsNmgsVerifySm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 403 } adnUCNodeErrorsNmgsActivateSm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 404 } adnUCNodeErrorsNmgsIsolateCm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 405 } adnUCNodeErrorsNmgsMajorVersionCm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 406 } adnUCNodeErrorsNmgsValidateSm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 407 } adnUCNodeErrorsNmgsSuppressSm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 408 } adnUCNodeErrorsNmgsDeactivateCm OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 409 } adnUCNodeErrorsNmgsUnknownVsn OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 450 } adnUCNodeErrorsNmgsConfirmLinkTO OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 451 } adnUCNodeErrorsNmgsNmciMsgFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsNmgs 452 } adnUCNodeErrorsFrs OBJECT IDENTIFIER ::= { adnUCNodeErrors 5 } adnUCNodeErrorsFrsNoDelete OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1 } adnUCNodeErrorsFrsNotConfigPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 2 } adnUCNodeErrorsFrsInvalLength OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 5 } adnUCNodeErrorsFrsNoMemory OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 6 } adnUCNodeErrorsFrsInvalAddrLength OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 7 } adnUCNodeErrorsFrsInvalType OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 8 } adnUCNodeErrorsFrsFailLimit OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 9 } adnUCNodeErrorsFrsFailList OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 10 } adnUCNodeErrorsFrsFailString OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 11 } adnUCNodeErrorsFrsFailScan OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 19 } adnUCNodeErrorsFrsNotUpdPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 20 } adnUCNodeErrorsFrsInvIntfTranId OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 257 } adnUCNodeErrorsFrsIntfNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 258 } adnUCNodeErrorsFrsIntfNotIns OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 259 } adnUCNodeErrorsFrsIntfTransNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 260 } adnUCNodeErrorsFrsIntfDelWithVC OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 264 } adnUCNodeErrorsFrsIntfDelFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 266 } adnUCNodeErrorsFrsIntfLlceFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 267 } adnUCNodeErrorsFrsIntfInconsTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 268 } adnUCNodeErrorsFrsIntfInvalTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 269 } adnUCNodeErrorsFrsIntfAddMod OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 270 } adnUCNodeErrorsFrsDelTransFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 271 } adnUCNodeErrorsFrsIntfIntErr OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 272 } adnUCNodeErrorsFrsVCInconsTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 513 } adnUCNodeErrorsFrsInvVCTranId OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1025 } adnUCNodeErrorsFrsIntfNotUp OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1026 } adnUCNodeErrorsFrsVCNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1027 } adnUCNodeErrorsFrsVCNotIns OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1028 } adnUCNodeErrorsFrsVCTransNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1029 } adnUCNodeErrorsFrsVCDelFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1032 } adnUCNodeErrorsFrsVCAddFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1033 } adnUCNodeErrorsFrsVCInvalTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1037 } adnUCNodeErrorsFrsVCAddMod OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1038 } adnUCNodeErrorsFrsVCDelTransFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1039 } adnUCNodeErrorsFrsVCIntErr OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1040 } adnUCNodeErrorsFrsFrcInvalTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1041 } adnUCNodeErrorsFrsFrcInvalIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1281 } adnUCNodeErrorsFrsNoMemFrcPath OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1282 } adnUCNodeErrorsFrsIntfFrsSWFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFrs 1536 } adnUCNodeErrorsIsna OBJECT IDENTIFIER ::= { adnUCNodeErrors 6 } adnUCNodeErrorsIsnaAddConnDelPend OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 257 } adnUCNodeErrorsIsnaAddIfindexRoute1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 515 } adnUCNodeErrorsIsnaInvDlciIcRoute OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 516 } adnUCNodeErrorsIsnaInvIpAdrIcRoute OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 517 } adnUCNodeErrorsIsnaAddConnDelPendRoute OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 518 } adnUCNodeErrorsIsnaAddRouteNoSuchObj OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 519 } adnUCNodeErrorsIsnaAddConfResourceUnavail1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1025 } adnUCNodeErrorsIsnaAddConfRefused1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1026 } adnUCNodeErrorsIsnaAddConfRangeErr1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1027 } adnUCNodeErrorsIsnaAddConfTableName1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1028 } adnUCNodeErrorsIsnaAddConfResourceUnavail2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1029 } adnUCNodeErrorsIsnaAddConfRefused2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1030 } adnUCNodeErrorsIsnaAddConfRangeErr2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1031 } adnUCNodeErrorsIsnaAddConfTableName2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 1032 } adnUCNodeErrorsIsnaDelInvalid OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2305 } adnUCNodeErrorsIsnaDelInvTblName OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2306 } adnUCNodeErrorsIsnaDelConfPend1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2307 } adnUCNodeErrorsIsnaDelRouteInvIfindex OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2561 } adnUCNodeErrorsIsnaDelRouteInvDlci OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2562 } adnUCNodeErrorsIsnaDelDelPend2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2563 } adnUCNodeErrorsIsnaDelRouteInvIp1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2564 } adnUCNodeErrorsIsnaDelRouteInvIp2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsna 2565 } adnUCNodeErrorsIsom OBJECT IDENTIFIER ::= { adnUCNodeErrors 7 } adnUCNodeErrorsIsomAddLineDelPend OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 257 } adnUCNodeErrorsIsomAddConnDelPend OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 513 } adnUCNodeErrorsIsomAddIfindexTrp1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 769 } adnUCNodeErrorsIsomInvDlciIcTrp OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 770 } adnUCNodeErrorsIsomAddConnDelPendTrp OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 772 } adnUCNodeErrorsIsomAddIfindexTrp2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 773 } adnUCNodeErrorsIsomAddTrpNoSuchObj OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 774 } adnUCNodeErrorsIsomAddConfRefused1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1025 } adnUCNodeErrorsIsomAddConfRangeErr1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1026 } adnUCNodeErrorsIsomAddConfTableName1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1028 } adnUCNodeErrorsIsomAddConfRefused2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1029 } adnUCNodeErrorsIsomAddConfRangeErr2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1030 } adnUCNodeErrorsIsomAddConfTableName2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1032 } adnUCNodeErrorsIsomAddConfResourceUnavail1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1033 } adnUCNodeErrorsIsomAddConfResourceUnavail2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 1034 } adnUCNodeErrorsIsomDelInvalid OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2305 } adnUCNodeErrorsIsomDelInvTblName OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2306 } adnUCNodeErrorsIsomDelConfPend1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2307 } adnUCNodeErrorsIsomDelDelPend2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2563 } adnUCNodeErrorsIsomDelTrapInvIfindex OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2561 } adnUCNodeErrorsIsomDelTrapInvDlci OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2562 } adnUCNodeErrorsIsomDelTrapInvIp1 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2564 } adnUCNodeErrorsIsomDelTrapInvIp2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2565 } adnUCNodeErrorsIsomDelLineInvState OBJECT IDENTIFIER ::= { adnUCNodeErrorsIsom 2817 } adnUCNodeErrorsFraSi OBJECT IDENTIFIER ::= { adnUCNodeErrors 10 } adnUCNodeErrorsFraSiLength2Big OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 5 } adnUCNodeErrorsFraSiNoMalloc OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 6 } adnUCNodeErrorsFraSiAddr2Long OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 7 } adnUCNodeErrorsFraSiBadType OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 8 } adnUCNodeErrorsFraSiCreateFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 258 } adnUCNodeErrorsFraSiGetTransFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 260 } adnUCNodeErrorsFraSiUpdateFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 266 } adnUCNodeErrorsFraSiUpdateWoCreate OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 268 } adnUCNodeErrorsFraSiIntfInternalErr OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 269 } adnUCNodeErrorsFraSiNoConfigUpdate OBJECT IDENTIFIER ::= { adnUCNodeErrorsFraSi 304 } adnUCNodeErrorsLdrFlip OBJECT IDENTIFIER ::= { adnUCNodeErrors 12 } adnUCNodeErrorsLdrFlipGeneral OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 1 } adnUCNodeErrorsLdrFlipIfIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 2 } adnUCNodeErrorsLdrFlipValue OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 3 } adnUCNodeErrorsLdrFlipTableFormat OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 4 } adnUCNodeErrorsLdrFlipConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 5 } adnUCNodeErrorsLdrFlipGet OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 6 } adnUCNodeErrorsLdrFlipGetFirst OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 7 } adnUCNodeErrorsLdrFlipGetNext OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 8 } adnUCNodeErrorsLdrFlipSet OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 9 } adnUCNodeErrorsLdrFlipUpdate OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 10 } adnUCNodeErrorsLdrFlipTest OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 11 } adnUCNodeErrorsLdrFlipUpdateFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 12 } adnUCNodeErrorsLdrFlipGetTransFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 13 } adnUCNodeErrorsLdrFlipCreateLcbFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrFlip 14 } adnUCNodeErrorsLdrQuicc OBJECT IDENTIFIER ::= { adnUCNodeErrors 13 } adnUCNodeErrorsLdrQuiccGeneral OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 1 } adnUCNodeErrorsLdrQuiccIfIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 2 } adnUCNodeErrorsLdrQuiccValue OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 3 } adnUCNodeErrorsLdrQuiccTableFormat OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 4 } adnUCNodeErrorsLdrQuiccConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 5 } adnUCNodeErrorsLdrQuiccGet OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 6 } adnUCNodeErrorsLdrQuiccGetFirst OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 7 } adnUCNodeErrorsLdrQuiccGetNext OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 8 } adnUCNodeErrorsLdrQuiccSet OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 9 } adnUCNodeErrorsLdrQuiccUpdate OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 10 } adnUCNodeErrorsLdrQuiccTest OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 11 } adnUCNodeErrorsLdrQuiccUpdateFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 12 } adnUCNodeErrorsLdrQuiccNoMoreRoomForIfIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 13 } adnUCNodeErrorsLdrQuiccGetTransFailed OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrQuicc 14 } adnUCNodeErrorsLdrSpyd OBJECT IDENTIFIER ::= { adnUCNodeErrors 14 } adnUCNodeErrorsLdrSpydNoMemory OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 1 } adnUCNodeErrorsLdrSpydInvVal OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 2 } adnUCNodeErrorsLdrSpydFracInvVal OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 3 } adnUCNodeErrorsLdrSpydFrac2 OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 4 } adnUCNodeErrorsLdrSpydDownLoad OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 5 } adnUCNodeErrorsLdrSpydNoCB OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 6 } adnUCNodeErrorsLdrSpydifAdmin OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 7 } adnUCNodeErrorsLdrSpydConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 8 } adnUCNodeErrorsLdrSpydTransID OBJECT IDENTIFIER ::= { adnUCNodeErrorsLdrSpyd 9 } adnUCNodeErrorsAtmline OBJECT IDENTIFIER ::= { adnUCNodeErrors 18 } adnUCNodeErrorsAtmlineIncTranId OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 1 } adnUCNodeErrorsAtmlineIncTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 2 } adnUCNodeErrorsAtmlineNotUpdPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 12 } adnUCNodeErrorsAtmlineIncParVal OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 13 } adnUCNodeErrorsAtmlineMissingPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 14 } adnUCNodeErrorsAtmlineBoardNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 20 } adnUCNodeErrorsAtmlineLineAlCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 21 } adnUCNodeErrorsAtmlineIncBoardType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 22 } adnUCNodeErrorsAtmlineSpareBoard OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 23 } adnUCNodeErrorsAtmlineLineNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 24 } adnUCNodeErrorsAtmlineTimNotSup OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 25 } adnUCNodeErrorsAtmlineTimNcpLoop OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 26 } adnUCNodeErrorsAtmlineIncApplType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 27 } adnUCNodeErrorsAtmlineIfTabNotDel OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 30 } adnUCNodeErrorsAtmlineNotCigPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 100 } adnUCNodeErrorsAtmlineNotAtmTcPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 110 } adnUCNodeErrorsAtmlineNoLowIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 111 } adnUCNodeErrorsAtmlineNoAtmIfap OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 112 } adnUCNodeErrorsAtmlineNotDs3E3Par OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 120 } adnUCNodeErrorsAtmlineNotT1E1Par OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 130 } adnUCNodeErrorsAtmlineNotSonetPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 140 } adnUCNodeErrorsAtmlineNotRs232Par OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 150 } adnUCNodeErrorsAtmlineInOutSpeed OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmline 151 } adnUCNodeErrorsAafd OBJECT IDENTIFIER ::= { adnUCNodeErrors 19 } adnUCNodeErrorsAafdMissingNominator OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 1 } adnUCNodeErrorsAafdMibError OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 2 } adnUCNodeErrorsAafdFmtError OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 3 } adnUCNodeErrorsAafdConfig OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 4 } adnUCNodeErrorsAafdInconsTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 5 } adnUCNodeErrorsAafdTimerFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 6 } adnUCNodeErrorsAafdCtxFail OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 7 } adnUCNodeErrorsAafdACI2TFull OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 8 } adnUCNodeErrorsAafdInconsState OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 9 } adnUCNodeErrorsAafdDoneError OBJECT IDENTIFIER ::= { adnUCNodeErrorsAafd 10 } adnUCNodeErrorsPmd OBJECT IDENTIFIER ::= { adnUCNodeErrors 20 } adnUCNodeErrorsPmdInconsTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsPmd 1 } adnUCNodeErrorsPmdInconsIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsPmd 2 } adnUCNodeErrorsPmdDatagramSend OBJECT IDENTIFIER ::= { adnUCNodeErrorsPmd 6 } adnUCNodeErrorsPmdConvIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsPmd 32 } adnUCNodeErrorsPmdMaxDefer OBJECT IDENTIFIER ::= { adnUCNodeErrorsPmd 35 } adnUCNodeErrorsAsig OBJECT IDENTIFIER ::= { adnUCNodeErrors 21 } adnUCNodeErrorsAsigObjectMaxNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 1 } adnUCNodeErrorsAsigVpiVccMaxNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 2 } adnUCNodeErrorsAsigNoBandwith OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 3 } adnUCNodeErrorsAsigMaxVccNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 4 } adnUCNodeErrorsAsigMaxVpcNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 5 } adnUCNodeErrorsAsigCDVTooLarge OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 6 } adnUCNodeErrorsAsigAddrMaxNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 7 } adnUCNodeErrorsAsigNMSRequest OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 101 } adnUCNodeErrorsAsigSoftware OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 102 } adnUCNodeErrorsAsigNoMemory OBJECT IDENTIFIER ::= { adnUCNodeErrorsAsig 103 } adnAtmTCTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmTCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN Transmission Convergence (TC) extension table." ::= { adnAtmMIBObjects 50 } adnAtmTCEntry OBJECT-TYPE SYNTAX AdnAtmTCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN Transmission Convergence (TC) extension table." INDEX { ifIndex } ::= { adnAtmTCTable 1 } AdnAtmTCEntry ::= SEQUENCE { adnAtmTCAlarmState INTEGER (-2147483648..2147483647), adnAtmTCScramblerConfig INTEGER, adnAtmTCCellRateDecConfig INTEGER, adnAtmTCMappingConfig INTEGER, adnAtmTCLossOfCellDelCounter Counter, adnAtmTCCorrectedHecCounter Counter, adnAtmTCUncorrectedHecCounter Counter, adnAtmTCUpwardOverflowCounter Counter, adnAtmTCDownwardOverflowCounter Counter, adnAtmTCLossOfAtmSignalCounter Counter } adnAtmTCAlarmState OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the state of alarms of the Transmission and Convergence part of ATM layer. It includes information given by atmTCAlarmState. It is a bit map represented as a sum; therefore, it can represent multiple defects simultaneously. The adnAtmTCNoAlarm bit should be set only if no other bit is set. The bit positions and their corresponding ATM core counter numbers # are: # Bit Value ------------------------------------------------------ . 1 adnAtmTCNoAlarm . No alarm present 17 2 adnAtmTCCorrectedHec . Excessive number of cells corrected . through Header Error Control (HEC) 18 4 adnAtmTCUncorrectedHec . Excessive number of cells deleted . through Header Error Control (HEC) 22 8 adnAtmTCUpwardOverflow . Upwards cell buffer overflow 26 16 adnAtmTCDownwardOverflow . Downwards cell buffer overflow 25 32 adnAtmTCLossOfAtmSignalCounter . Loss of ATM signal from the ET part . to the LT part of the board" ::= { adnAtmTCEntry 1 } adnAtmTCScramblerConfig OBJECT-TYPE SYNTAX INTEGER { adnAtmTCScramblerOn(1), adnAtmTCScramblerOff(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines if ATM scrambler is active or not." ::= { adnAtmTCEntry 2 } adnAtmTCCellRateDecConfig OBJECT-TYPE SYNTAX INTEGER { adnAtmTCUnassignedCell(1), adnAtmTCIdleCell(2), adnAtmTCNoCRD(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of cell rate decoupling (CRD) mode selected for the ATM TC layer: - unassigned cells (ANSI), - idle cells (ITU), - no CRD for an ATM TC layer over an ATM internal line. Common Name: Cell Rate Decoupling" ::= { adnAtmTCEntry 3 } adnAtmTCMappingConfig OBJECT-TYPE SYNTAX INTEGER { adnAtmTCOtherMapping(1), adnAtmTCPlcpMapping(2), adnAtmTCDirectMapping(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of mapping of ATM layer on physical layer: - other mapping : the mapping of the ATM layer is none of the following mappings, - PLCP mapping : the ATM layer is mapped on Physical Layer Convergence Protocol layer (PLCP), - direct mapping : the ATM layer is directly mapped on transmission layer." ::= { adnAtmTCEntry 4 } adnAtmTCLossOfCellDelCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-cell-delineation (LOCD). Counter #16 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3-DM, ATM-E3, ATM-T1 and ATM-E1 interfaces." ::= { adnAtmTCEntry 5 } adnAtmTCCorrectedHecCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells corrected through Header Error Control (HEC) mechanisms. Counter #17 of the ATM core, only available on ATM interfaces over lines on BBTP3C, BBE3B, BBE3B3, BBS1B, BBS1B3, BBS1B2, BBS1B4, BBS4B or BBS4B2 board." ::= { adnAtmTCEntry 6 } adnAtmTCUncorrectedHecCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells discarded through Header Error Control (HEC) mechanisms. Counter #18 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3, ATM-E3, ATM-T1 and ATM-E1 interfaces." ::= { adnAtmTCEntry 7 } adnAtmTCUpwardOverflowCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of upward cell buffer (output buffer) overflow events. Counter #22 of the ATM core, only available on ATM interfaces over lines on BBT1B, BBE1B, BBE3B, BBE3B3, BBT3B, BBT3B2, BBT3B3, BBT3B4, BBS1B, BBS1B3, BBS1B2, BBS1B4, BBS4B or BBS4B2 board." ::= { adnAtmTCEntry 8 } adnAtmTCDownwardOverflowCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of downward cell buffer (input buffer) overflow events. Counter #26 of the ATM core, only available on ATM-SONET, ATM-SDH, ATM-DS3, and ATM-E3 interfaces." ::= { adnAtmTCEntry 9 } adnAtmTCLossOfAtmSignalCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss of ATM signal from the Exchange Termination processor (ET) to the Line Termination processor (LT). Counter #31 of the ATM core, only available on ATM interfaces over lines on BBS1B, BBS1B3, BBS1B2, or BBS1B4 board." ::= { adnAtmTCEntry 10 } adnAtmDs3PlcpTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmDs3PlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ADN DS3 Physical Layer Convergence Protocol (PLCP) extension table." ::= { adnAtmMIBObjects 51 } adnAtmDs3PlcpEntry OBJECT-TYPE SYNTAX AdnAtmDs3PlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ADN DS3 Physical Layer Convergence Protocol (PLCP) extension table." INDEX { ifIndex } ::= { adnAtmDs3PlcpTable 1 } AdnAtmDs3PlcpEntry ::= SEQUENCE { adnAtmDs3PlcpFerfCounter Counter, adnAtmDs3PlcpLofCounter Counter, adnAtmDs3PlcpFebeCounter Counter, adnAtmDs3PlcpBip8Counter Counter, adnAtmDs3PlcpOofCounter Counter } adnAtmDs3PlcpFerfCounter OBJECT-TYPE SYNTAX Counter -- UNITS 450-milliseconds periods ACCESS read-only STATUS mandatory DESCRIPTION "Duration of far end received failure (FERF) received from the remote equipment. FERF is also called remote alarm indication (RAI) or received yellow alarm. Counter #10 of the ATM core, only available on DS3-PLCP interfaces." ::= { adnAtmDs3PlcpEntry 1 } adnAtmDs3PlcpLofCounter OBJECT-TYPE SYNTAX Counter -- UNITS 450-milliseconds periods ACCESS read-only STATUS mandatory DESCRIPTION "Duration of loss-of-frame (LOF). Counter #12 of the ATM core, only available on DS3-PLCP interfaces." ::= { adnAtmDs3PlcpEntry 2 } adnAtmDs3PlcpFebeCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of far end block errors (FEBE) received from the remote equipment. Counter #9 of the ATM core, only available on DS3-PLCP interfaces." ::= { adnAtmDs3PlcpEntry 3 } adnAtmDs3PlcpBip8Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of 8-bits interleaved parity (BiP-8) errors. received from the remote equipment. Counter #11 of the ATM core, only available on DS3-PLCP interfaces." ::= { adnAtmDs3PlcpEntry 4 } adnAtmDs3PlcpOofCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of out-of-frame (OOF) events. Counter #20 of the ATM core, only available on DS3-PLCP interfaces." ::= { adnAtmDs3PlcpEntry 5 } adnAtmBoardErCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmBoardErCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the ATM boards error counter table. Each counter corresponds to a defect number identified by a bit set in the adnProcessorStatus of the adnProcessorTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board." ::= { adnNodeSupervisionMIB 21 } adnAtmBoardErCounterEntry OBJECT-TYPE SYNTAX AdnAtmBoardErCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM boards error counter table." INDEX { adnEquipType, adnEquipIndex } ::= { adnAtmBoardErCounterTable 1 } AdnAtmBoardErCounterEntry ::= SEQUENCE { adnAtmBoardErOrWgStatus INTEGER (-2147483648..2147483647), adnAtmBoardASEStatus INTEGER (-2147483648..2147483647), adnAtmBoardCIGStatus INTEGER (-2147483648..2147483647), adnAtmBoardHSCStatus INTEGER (-2147483648..2147483647), adnAtmBoardErQRP0RAMPCounter Counter, adnAtmBoardErQRP0FIFOCounter Counter, adnAtmBoardErQRP1RAMPCounter Counter, adnAtmBoardErQRP1FIFOCounter Counter, adnAtmBoardErQRP2RAMPCounter Counter, adnAtmBoardErQRP2FIFOCounter Counter, adnAtmBoardErQRP3RAMPCounter Counter, adnAtmBoardErQRP3FIFOCounter Counter, adnAtmBoardErHMPLLPCCounter Counter, adnAtmBoardErHMPLHPCCounter Counter, adnAtmBoardErHMP0SYNCCounter Counter, adnAtmBoardErHMP1SYNCCounter Counter, adnAtmBoardErUFOFCounter Counter, adnAtmBoardErUFRFCounter Counter, adnAtmBoardErNFOFCounter Counter, adnAtmBoardErPHTRAMPCounter Counter, adnAtmBoardErNFRFCounter Counter, adnAtmBoardErNAVCCounter Counter, adnAtmBoardErNAVPCounter Counter, adnAtmBoardErRBOFCounter Counter, adnAtmBoardErAPPLIQCounter Counter, adnAtmBoardErLIRC0Counter Counter, adnAtmBoardErLIRC1Counter Counter, adnAtmBoardErRFIFOCounter Counter, adnAtmBoardErRFIFCCounter Counter, adnAtmBoardErBGETBCounter Counter, adnAtmBoardErBGMUXCounter Counter, adnAtmBoardErHOBCounter Counter, adnAtmBoardErMOBCounter Counter, adnAtmBoardErLOBCounter Counter, adnAtmBoardErDRAMPCounter Counter, adnAtmBoardErRFIFFCounter Counter, adnAtmBoardCEMStatus INTEGER (-2147483648..2147483647), adnAtmBoardErDCSECounter Counter, adnAtmBoardErDRFOVCounter Counter, adnAtmBoardErDCMOVCounter Counter, adnAtmBoardErDCMMECounter Counter, adnAtmBoardErUCSECounter Counter, adnAtmBoardErURFOVCounter Counter, adnAtmBoardErUCMOVCounter Counter, adnAtmBoardErUCMMECounter Counter, adnAtmBoardErRFORRF0Counter Counter, adnAtmBoardErRFORRF1Counter Counter, adnAtmBoardErRFORRF2Counter Counter } adnAtmBoardErOrWgStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the gravity of a processor failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnASEBoardStatus, adnCIGBoardStatus or adnHSCBoardStatus (which defines the processor's failure status). The adnAtmBoardErOrWgStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status." ::= { adnAtmBoardErCounterEntry 1 } adnAtmBoardASEStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for the matrix boards. The bit positions are : 16384 : adnAtmBoardErQRP0RAMP BGQRP-0 chip RAM parity error 65536 : adnAtmBoardErQRP0FIFO BGQRP-0 chip extraction FIFO overflow 131072 : adnAtmBoardErQRP1RAMP BGQRP-1 chip RAM parity error 524288 : adnAtmBoardERQRP1FIFO BGQRP-1 chip extraction FIFO overflow 1048576 : adnAtmBoardErQRP2RAMP BGQRP-2 chip RAM parity error 4194304 : adnAtmBoardErQRP2FIFO BGQRP-2 chip extraction FIFO overflow 8388608 : adnAtmBoardErQRP3RAMP BGQRP-3 chip RAM parity error 33554432 : adnAtmBoardErQRP3FIFO BGQRP-3 chip extraction FIFO overflow 67108864 : adnAtmBoardErHMPLLPC loss of low priority cells 134217728 : adnAtmBoardErHMPLHPC loss of high priority cells 268435456 : adnAtmBoardErHMP0SYNC BGHMP-0 chip synchronization fault 2147483648: adnAtmBoardErHMP1SYNC BGHMP-1 chip synchronization fault N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0." ::= { adnAtmBoardErCounterEntry 2 } adnAtmBoardCIGStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CIG boards. The bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity error 16 : adnAtmBoardErNFRF network FIFO read failure 128 : adnAtmBoardErRBOF receipt cell buffer overflow 4096 : adnAtmBoardErAPPLIQ applique not present N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0." ::= { adnAtmBoardErCounterEntry 3 } adnAtmBoardHSCStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the processor status.It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for HSC boards, except CEM8 boards. For all HSC boards except BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity error 16 : adnAtmBoardErNFRF network FIFO read failure 128 : adnAtmBoardErRBOF receipt cell buffer overflow 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present For the BBE1B and BBT1B boards, there are specific defects corresponding to the following bit positions : 8192 : adnAtmBoardErFIFO rate reduction FIFO overflow 16384 : adnAtmBoardErFIFC rate reduction FIFO cell alignment failure 32768 : adnAtmBoardErBGETB loss of cell synchronization 65536 : adnAtmBoardErBGETB upwards start of cell error in BGMUX(or BGMUX 2) For the BBTS1C and BBTP3C boards,the bit positions are : 1 : adnAtmBoardErPHT0FIF0 FIFO defect on PHT2-0 2 : adnAtmBoardErPHT0FIF1 FIFO defect on PHT2-1 4 : adnAtmBoardErPHT0FIF2 FIFO defect on PHT2-2 8 : adnAtmBoardErPHT0FIF3 FIFO defect on PHT2-3 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present 8192 : adnAtmBoardErUFOF user side FIFO overflow 16384 : adnAtmBoardErUFE user side FIFO error 32768 : adnAtmBoardErEFOV extraction FIFO overflow 65636 : adnAtmBoardErQRPPRAMP QRP RAM parity error 131072 : adnAtmBoardErDRAME DRAM ECC error 262144 : adnAtmBoardErDCSE downwards cell syncho error 524288 : adnAtmBoardErDRFOV downwards receiving FIFO overflow 1048576 : adnAtmBoardErRFORRF rate reduction FIFO overflow 2097152 : adnAtmBoardErDCMOV downwards cell memory overflows 4194304 : adnAtmBoardErDCMME downwards cell memory management error 8388608 : adnAtmBoardErUCSE upwards cell synchro error 16777216 : adnAtmBoardErURFOV upwards receiving FIFO overflow 33554432 : adnAtmBoardErUCMOV upwards cell memory overflow 67108864 : adnAtmBoardErUCMME upwards cell memory management error 1342177728: adnAtmBoardErULMA0OV upwards LMA0 overflow N.B.: This variable is significant when the operational state of the processor is enabled. When there is no processor error, this variable has the value 0." ::= { adnAtmBoardErCounterEntry 4 } adnAtmBoardErQRP0RAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the first QRP chip RAM parity errors; counter #14 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 5 } adnAtmBoardErQRP0FIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the first QRP chip extraction FIFO overflows; counter #16 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 6 } adnAtmBoardErQRP1RAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the second QRD chip RAM parity errors; counter #17 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 7 } adnAtmBoardErQRP1FIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the first QRP chip extraction FIFO overflows; counter #19 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 8 } adnAtmBoardErQRP2RAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the second QRP chip RAM parity errors; counter #20 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 9 } adnAtmBoardErQRP2FIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the second QRP chip extraction FIFO overflows; counter #22 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 10 } adnAtmBoardErQRP3RAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the third QRP chip RAM parity errors; counter #23 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 11 } adnAtmBoardErQRP3FIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of the third QRP chip extraction FIFO overflows; counter #25 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 12 } adnAtmBoardErHMPLLPCCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of low priority cells lost due to Selective Cell Discard (SCD); counter #26 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 13 } adnAtmBoardErHMPLHPCCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of high priority cells lost due to buffer overflow (FULC); counter #27 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 14 } adnAtmBoardErHMP0SYNCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of fault synchronization in the first HMP chip; counter #28 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 15 } adnAtmBoardErHMP1SYNCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of fault synchronization in the second HMP chip; counter #31 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 16 } adnAtmBoardErUFOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of user FIFO overflows; this counter is not relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 17 } adnAtmBoardErUFRFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of user FIFO read failures; counter #1 of the ATM core; this counter is not relevant for the matrix board, for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 18 } adnAtmBoardErNFOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network FIFO overflows; counter #2 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 19 } adnAtmBoardErPHTRAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of BGPHT chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board, the HBCEx boards, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 20 } adnAtmBoardErNFRFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network FIFO read failures; counter #4 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 21 } adnAtmBoardErNAVCCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS obsolete DESCRIPTION "The counter associated with the number of cells received on non active VC; counter #5 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 22 } adnAtmBoardErNAVPCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS obsolete DESCRIPTION "The counter associated with the number of cells received on non active VP; counter #6 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 23 } adnAtmBoardErRBOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of reception buffer overflows; counter #7 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 24 } adnAtmBoardErAPPLIQCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of applique missing. expressed in milliseconds; counter #12 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAtmBoardErCounterEntry 25 } adnAtmBoardErLIRC0Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of loss of signal on IRC0; counter #9 of the ATM core; this counter is only relevant for a HSC board." ::= { adnAtmBoardErCounterEntry 26 } adnAtmBoardErLIRC1Counter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of loss of signal on IRC1. expressed in milliseconds; counter #10 of the ATM core; this counter is only relevant for a HSC board." ::= { adnAtmBoardErCounterEntry 27 } adnAtmBoardErRFIFOCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of rate reduction FIFO overflows (from ET to LT). expressed in milliseconds; counter #13 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards." ::= { adnAtmBoardErCounterEntry 28 } adnAtmBoardErRFIFCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of rate reduction FIFO cell alignment failures; counter #14 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards." ::= { adnAtmBoardErCounterEntry 29 } adnAtmBoardErBGETBCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of loss of cell synchronization (BGETB); counter #15 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards." ::= { adnAtmBoardErCounterEntry 30 } adnAtmBoardErBGMUXCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of received start of cell errors from BGMUX; counter #16 of the ATM core; this counter is only relevant for BBE1B and BBT1B boards." ::= { adnAtmBoardErCounterEntry 31 } adnAtmBoardErHOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the duration of overflows on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer. expressed in milliseconds; counter #18 of the ATM core." ::= { adnAtmBoardErCounterEntry 32 } adnAtmBoardErMOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the duration of overflows on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B); expressed in milliseconds; counter #19 of the ATM core." ::= { adnAtmBoardErCounterEntry 33 } adnAtmBoardErLOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the duration of overflows on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer; expressed in milliseconds; counter #20 of the ATM core." ::= { adnAtmBoardErCounterEntry 34 } adnAtmBoardErDRAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of processor DRAM parity errors; counter #17 of the ATM core; this counter is only relevant for a HBCEx board." ::= { adnAtmBoardErCounterEntry 35 } adnAtmBoardErRFIFFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Rate reduction FIFO full events from ET to AAL1 component; counter #31 of the ATM core; this counter is only relevant for a HBCEx board." ::= { adnAtmBoardErCounterEntry 36 } adnAtmBoardCEMStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the processor status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CEM8 boards. The bit positions are : 1 : adnAtmBoardErUFOF user FIFO overflow 2 : adnAtmBoardErUFRF user FIFO read failure 4 : adnAtmBoardErNFOF network FIFO overflow 16 : adnAtmBoardErNFRF network FIFO read failure 512 : adnAtmBoardErLIRC0 loss of signal on IRC0 1024 : adnAtmBoardErLIRC1 loss of signal on IRC1 4096 : adnAtmBoardErAPPLIQ applique not present 131072 : adnAtmBoardErDRAMP processor DRAM parity error 2147483648: adnAtmBoardErRFIFF rate reduction FIFO full from ET to AAL1 component N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0." ::= { adnAtmBoardErCounterEntry 37 } adnAtmBoardErDCSECounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of downwards cell synchro errors; counter #18 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 38 } adnAtmBoardErDRFOVCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of downwards receiving FIFO overflows; counter #19 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 39 } adnAtmBoardErDCMOVCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of downwards cell memory overflows; counter #21 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 40 } adnAtmBoardErDCMMECounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of downwards cell memory management errors; counter #22 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 41 } adnAtmBoardErUCSECounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of upwards cell synchro errors; counter #23 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 42 } adnAtmBoardErURFOVCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of upwards receiving FIFO overflows; counter #24 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 43 } adnAtmBoardErUCMOVCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of upwards cell memory overflows; counter #25 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 44 } adnAtmBoardErUCMMECounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of upwards cell memory management errors; counter #26 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 45 } adnAtmBoardErRFORRF0Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of rate reduction FIFO overflows on RRF0; counter #32 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 46 } adnAtmBoardErRFORRF1Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of rate reduction FIFO overflows on RRF1; counter #33 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 47 } adnAtmBoardErRFORRF2Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of rate reduction FIFO overflows on RRF2; counter #34 of the ATM core; this counter is only relevant for the BBTS1C boards and for the BBTP3C boards." ::= { adnAtmBoardErCounterEntry 48 } adnAtmBoardTraCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmBoardTraCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the ATM boards traffic counter table. The counter is classified according to the board type.It is specific to the broadband ATM switching element (BBASE) board also called the matrix board." ::= { adnNodeSupervisionMIB 22 } adnAtmBoardTraCounterEntry OBJECT-TYPE SYNTAX AdnAtmBoardTraCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM boards traffic counter table." INDEX { adnEquipType, adnEquipIndex } ::= { adnAtmBoardTraCounterTable 1 } AdnAtmBoardTraCounterEntry ::= SEQUENCE { adnAtmBoardTraHMP0ObsCounter Counter, adnAtmBoardTraHMP1ObsCounter Counter, adnAtmBoardTraFPTMICICounter Gauge, adnAtmBoardTraMOBSCDCounter Counter, adnAtmBoardTraLOBSCDCounter Counter, adnAtmBoardTraMOBEFCICounter Counter, adnAtmBoardTraLOBEFCICounter Counter, adnAtmBoardTraMOBTPDCounter Counter, adnAtmBoardTraLOBTPDCounter Counter, adnAtmBoardTraHOBObsCounter Counter, adnAtmBoardTraMOBObsCounter Counter, adnAtmBoardTraLOBObsCounter Counter } adnAtmBoardTraHMP0ObsCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of cells received since the observation threshold is exceeded in the first HMP chip; counter #0 of the ATM core; this counter is only relevant for the matrix board with a HMP release 2 chip." ::= { adnAtmBoardTraCounterEntry 1 } adnAtmBoardTraHMP1ObsCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of cells received since the observation threshold is exceeded in the second HMP chip; counter #1 of the ATM core; this counter is only relevant for the matrix board with a HMP release 2 chip." ::= { adnAtmBoardTraCounterEntry 2 } adnAtmBoardTraFPTMICICounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of free outgoing point-to-multipoint (PTM) internal channel identifiers (ICI); counter #2 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAtmBoardTraCounterEntry 3 } adnAtmBoardTraMOBSCDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Selective Cell Discard (SCD) activations on medium priority output buffer; counter #33 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 4 } adnAtmBoardTraLOBSCDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Selective Cell Discard (SCD) activations on low priority output buffer; counter #34 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 5 } adnAtmBoardTraMOBEFCICounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on medium priority output buffer; counter #35 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 6 } adnAtmBoardTraLOBEFCICounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on low priority output buffer; counter #36 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 7 } adnAtmBoardTraMOBTPDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Tail Packet Discard (TPD) activations on medium priority output buffer; counter #37 of the ATM core; this counter isis only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 8 } adnAtmBoardTraLOBTPDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of Tail Packet Discard (TPD) activations on low priority outpur buffer; counter #38 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 9 } adnAtmBoardTraHOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of observation threshold exceedings on high priority output buffer; counter #39 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 10 } adnAtmBoardTraMOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of observation threshold exceedings on medium priority output buffer; counter #40 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 11 } adnAtmBoardTraLOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counter associated with the number of observation threshold exceedings on low priority output buffer; counter #41 of the ATM core; this counter is only relevant for a HSC board with BGTOB chip." ::= { adnAtmBoardTraCounterEntry 12 } adnAeiPortErCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAeiPortErCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the ATM electrical interface (AEI) port error counter table. Each counter corresponds to a defect number identified by a bit set in the adnAeiPortEratus of the adnAeiPortTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board." ::= { adnNodeSupervisionMIB 23 } adnAeiPortErCounterEntry OBJECT-TYPE SYNTAX AdnAeiPortErCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM electrical interface (AEI) port error counter table." INDEX { adnEquipType, adnEquipIndex } ::= { adnAeiPortErCounterTable 1 } AdnAeiPortErCounterEntry ::= SEQUENCE { adnAeiPortErOrWgStatus INTEGER, adnAeiPortASEStatus INTEGER, adnAeiPortCIGStatus INTEGER, adnAeiPortHSCStatus INTEGER, adnAeiPortErOOSCounter Counter, adnAeiPortErNFOFCounter Counter, adnAeiPortErCECHCounter Counter, adnAeiPortErUCECHCounter Counter, adnAeiPortErNPECounter Counter, adnAeiPortErNMA1Counter Counter, adnAeiPortErEMA1Counter Counter, adnAeiPortErNICICounter Counter, adnAeiPortErNCRCCounter Counter, adnAeiPortErNAALCounter Counter, adnAeiPortErLOSCounter Counter, adnAeiPortErRTAGCounter Counter, adnAeiPortErURCCounter Counter, adnAeiPortErIEMRAMPCounter Counter, adnAeiPortErCRCMA1Counter Counter, adnAeiPortErCRCSICCounter Counter, adnAeiPortErNSFOFCounter Counter, adnAeiPortErNFWFCounter Counter, adnAeiPortErSFWFCounter Counter, adnAeiPortErNSFRFCounter Counter, adnAeiPortErUSFRFCounter Counter, adnAeiPortErUFWFCounter Counter, adnAeiPortErUSFOFCounter Counter, adnAeiPortErUCRCCounter Counter, adnAeiPortErUAALCounter Counter, adnAeiPortErSFIFOCounter Counter, adnAeiPortCEMStatus INTEGER } adnAeiPortErOrWgStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the gravity of a port failure. It is a bit map represented as a sum. Each bit position maps to the corresponding position in the nominator adnAeiPortASEStatus, adnAeiPortCIGStatus or adnAeiPortHSCStatus (which defines the port's failure status). The adnAeiPortErOrWgStatus bit classifies the failure as either an error (value '1') or a warning (value '0'). A bit value of '0' can also mean the failure classification does not apply to the failure status." ::= { adnAeiPortErCounterEntry 1 } adnAeiPortASEStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for ASE boards. The bit positions are : 1 : adnAeiPortOOS synchronization fault ATM Electrical Interface 2 : adnAeiPortLOS synchronization fault 8 bit parallel Atm Internal Interface 4 : adnAeiPortNFOF network FIFO overflows 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 512 : adnAeiPortRTA routing data error status 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 error active maintenance cell received 67108864 : adnAeiPortNCRC CRC errors detected on payload field 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error in AEI reception 1073741824: adnAeiPortURC unrouted cells N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0." ::= { adnAeiPortErCounterEntry 2 } adnAeiPortCIGStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CIG boards. The bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 64 : adnAeiPortCRCMA CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0." ::= { adnAeiPortErCounterEntry 3 } adnAeiPortHSCStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for HSC boards (except CEM8 boards). For HSC boards except BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 64 : adnAeiPortCRCMA CRC errors on payload field of MA1 (Active Maintenance type 1) cells 128 : adnAeiPortCRCSIC CRC errors on payload field of SIC (Self Identified Cell) cells 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 33554432 : adnAeiPortNICI cells received on non-active ICI (Internal Communication Interface) 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 268435456 : adnAeiPortUCRC CRC errors detected on user side 536870912 : adnAeiPortUAAL AAL sequence error on user side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow For the BBTS1C and BBTP3C boards, the bit positions are : 1 : adnAeiPortOOS synchronization fault ATM Electrical Interface 2 : adnAeiPortLOS synchronization fault 8 bit parallel Atm Internal Interface 4 : adnAeiPortNFOF network FIFO overflows 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 error active maintenance cell received 67108864 : adnAeiPortNCRC CRC errors detected on payload field 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error in AEI reception N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0." ::= { adnAeiPortErCounterEntry 4 } adnAeiPortErOOSCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of the out of synchronization. expressed in milliseconds; counter #0 of the ATM core." ::= { adnAeiPortErCounterEntry 5 } adnAeiPortErNFOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network FIFO overflow intervals; counter #2 of the ATM core." ::= { adnAeiPortErCounterEntry 6 } adnAeiPortErCECHCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of corrected errors in cell header; counter #4 of the ATM core." ::= { adnAeiPortErCounterEntry 7 } adnAeiPortErUCECHCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of uncorrected errors in cell header; counter #5 of the ATM core." ::= { adnAeiPortErCounterEntry 8 } adnAeiPortErNPECounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of parity errors on payload field of cells; counter #8 of the ATM core." ::= { adnAeiPortErCounterEntry 9 } adnAeiPortErNMA1Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of lost data maintenance cells; counter #12 of the ATM core." ::= { adnAeiPortErCounterEntry 10 } adnAeiPortErEMA1Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of data maintenance cells received with error indication; counter #14 of the ATM core." ::= { adnAeiPortErCounterEntry 11 } adnAeiPortErNICICounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of cells received on non active internal channel identifier (ICI); counter #25 of the ATM core this counter is not relevant for the HBCEx boards." ::= { adnAeiPortErCounterEntry 12 } adnAeiPortErNCRCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CRC errors on network side; counter #26 of the ATM core." ::= { adnAeiPortErCounterEntry 13 } adnAeiPortErNAALCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ATM adaptation layer (AAL) sequence errors on network side; counter #27 of the ATM core." ::= { adnAeiPortErCounterEntry 14 } adnAeiPortErLOSCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the loss of synchronization intervals; counter #1 of the ATM core; this counter is only relevant for the matrix board, for the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 15 } adnAeiPortErRTAGCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of unallowed routing tags; counter #9 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortErCounterEntry 16 } adnAeiPortErURCCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of unrouted cells; counter #30 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortErCounterEntry 17 } adnAeiPortErIEMRAMPCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of BGIEM chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 18 } adnAeiPortErCRCMA1Counter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CRC errors on payload field of maintenance active cells of type 1 (MA1); counter #6 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards." ::= { adnAeiPortErCounterEntry 19 } adnAeiPortErCRCSICCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CRC errors on payload field of self identified cells (SIC); counter #7 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards." ::= { adnAeiPortErCounterEntry 20 } adnAeiPortErNSFOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network signalling FIFO overflows; counter #17 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 21 } adnAeiPortErNFWFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network FIFO write failures; counter #18 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 22 } adnAeiPortErSFWFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of signalling FIFO write failures; counter #19 of the ATM core; this counter is not relevant for the matrix board., the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 23 } adnAeiPortErNSFRFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of network signalling FIFO read failures; counter #20 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 24 } adnAeiPortErUSFRFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of user signalling FIFO read failures; counter #22 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 25 } adnAeiPortErUFWFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of user FIFO write failures; counter #23 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 26 } adnAeiPortErUSFOFCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of user signalling FIFO overflows; counter #24 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 27 } adnAeiPortErUCRCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of CRC errors ion user side; counter #28 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards." ::= { adnAeiPortErCounterEntry 28 } adnAeiPortErUAALCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of ATM adaptation layer (AAL) sequence errors on user side; counter #29 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards, the BBTP3C boards and for the HBCEx boards." ::= { adnAeiPortErCounterEntry 29 } adnAeiPortErSFIFOCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of load sharing FIFO overflows; counter #31 of the ATM core; this counter is not relevant for the matrix board, the BBTS1C boards and for the BBTP3C boards." ::= { adnAeiPortErCounterEntry 30 } adnAeiPortCEMStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port status. It is a bit map represented as a sum; therefore it can represent multiple failures. This variable is only significant for CEM8 boards. The bit positions are : 1 : adnAeiPortOOS out-of-synchronization 4 : adnAeiPortNFOF network FIFO overflows 8 : adnAeiPortIEMRAMP BGIEM chip RAM parity errors 16 : adnAeiPortCECH corrected errors in cell header 32 : adnAeiPortUCECH uncorrected errors in cell header 256 : adnAeiPortNPE parity errors on payload 4096 : adnAeiPortNMA1 no active maintenance cell received 16384 : adnAeiPortEMA1 active maintenance cell received with error indication 131072 : adnAeiPortNSFOF network signalling FIFO overflow 262144 : adnAeiPortNFWF network FIFO write failure 524288 : adnAeiPortSFWF signalling FIFO write failure 1048576 : adnAeiPortNSFRF network signalling FIFO read failure 4194304 : adnAeiPortUSFRF user signalling FIFO read failure 8388608 : adnAeiPortUFWF user FIFO write failure 16777216 : adnAeiPortUSFOF user signalling FIFO overflow 67108864 : adnAeiPortNCRC CRC errors detected on network side 134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer) sequence error on network side 2147483648: adnAeiPortSFIFO load sharing FIFO overflow N.B.: This variable is significant when the operational state of the port is enabled. When there is no port error, this variable has the value 0." ::= { adnAeiPortErCounterEntry 31 } adnAeiPortTraCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAeiPortTraCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the ATM electrical interface (AEI) port traffic counters table. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board." ::= { adnNodeSupervisionMIB 24 } adnAeiPortTraCounterEntry OBJECT-TYPE SYNTAX AdnAeiPortTraCounterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM electrical interface (AEI) port traffic counters table." INDEX { adnEquipType, adnEquipIndex } ::= { adnAeiPortTraCounterTable 1 } AdnAeiPortTraCounterEntry ::= SEQUENCE { adnAeiPortTraPTPSetRqCounter Counter, adnAeiPortTraPTMSetRqCounter Counter, adnAeiPortTraPTPSetRjBCounter Counter, adnAeiPortTraPTMSetRjBCounter Counter, adnAeiPortTraPTPSetRjCCounter Counter, adnAeiPortTraPTMSetRjCCounter Counter, adnAeiPortTraPTPSetTrCounter Counter, adnAeiPortTraPTMSetTrCounter Counter, adnAeiPortTraPTPCnxCounter Gauge, adnAeiPortTraPTMCnxCounter Gauge, adnAeiPortTraEFCCCounter Counter, adnAeiPortTraPTPBWICIRqCounter Counter, adnAeiPortTraPTMBWICIRqCounter Counter, adnAeiPortTraPTPBWRjCounter Counter, adnAeiPortTraPTMBWRjCounter Counter, adnAeiPortTraPTPICIRjCounter Counter, adnAeiPortTraPTMICIRjCounter Counter, adnAeiPortTraPeakBWCounter Gauge, adnAeiPortTraFPTPICICounter Gauge, adnAeiPortTraMPriorBWCounter Gauge, adnAeiPortTraInCellsCounter Counter, adnAeiPortTraOutCellsCounter Counter, adnAeiPortTraEBCCCounter Counter } adnAeiPortTraPTPSetRqCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) setup requests; counter #1 of the ATM core." ::= { adnAeiPortTraCounterEntry 1 } adnAeiPortTraPTMSetRqCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) setup requests; counter #2 of the ATM core." ::= { adnAeiPortTraCounterEntry 2 } adnAeiPortTraPTPSetRjBCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) setup rejects due to blocking; counter #3 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 3 } adnAeiPortTraPTMSetRjBCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) setup rejects due to blocking; counter #4 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 4 } adnAeiPortTraPTPSetRjCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) setup rejects due to communication; counter #5 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 5 } adnAeiPortTraPTMSetRjCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) setup rejects due to communication; counter #6 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 6 } adnAeiPortTraPTPSetTrCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) setup trials; counter #7 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 7 } adnAeiPortTraPTMSetTrCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) setup trials; counter #8 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 8 } adnAeiPortTraPTPCnxCounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) connections in progress; counter #13 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 9 } adnAeiPortTraPTMCnxCounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) connections in progress; counter #14 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 10 } adnAeiPortTraEFCCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of established forward connection component; counter #17 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 11 } adnAeiPortTraPTPBWICIRqCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) bandwith or internal channel identifier (BW,ICI) requests; counter #4 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 12 } adnAeiPortTraPTMBWICIRqCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) bandwith or internal channel identifier (BW,ICI) requests; counter #5 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 13 } adnAeiPortTraPTPBWRjCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) bandwith (BW) requests failure; counter #6 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 14 } adnAeiPortTraPTMBWRjCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) bandwith (BW) requests failure; counter #7 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 15 } adnAeiPortTraPTPICIRjCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-point (PTP) internal channel identifier (ICI) requests failure; counter #8 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 16 } adnAeiPortTraPTMICIRjCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of point-to-multipoint (PTM) internal channel identifier (ICI) requests failure; counter #9 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 17 } adnAeiPortTraPeakBWCounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the reserved peak bandwith (BW); counter #10 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 18 } adnAeiPortTraFPTPICICounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of free point-to-point (PTP) internal channel identifiers (ICI); counter #12 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 19 } adnAeiPortTraMPriorBWCounter OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS obsolete DESCRIPTION "The counter associated with the reserved mean priority bandwith (BW); Counter #14 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 20 } adnAeiPortTraInCellsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of incoming cells; counter #15 of the ATM core." ::= { adnAeiPortTraCounterEntry 21 } adnAeiPortTraOutCellsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of outgoing cells; counter #16 of the ATM core." ::= { adnAeiPortTraCounterEntry 22 } adnAeiPortTraEBCCCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of established backward connection component; counter #18 of the ATM core; this counter is not relevant for the matrix board." ::= { adnAeiPortTraCounterEntry 23 } adnHscBoardTrMgtTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnHscBoardTrMgtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is the HSC Board Traffic Management parameters table. This is only relevant for HSC boards with output buffers" ::= { adnNodeSupervisionMIB 25 } adnHscBoardTrMgtEntry OBJECT-TYPE SYNTAX AdnHscBoardTrMgtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM Traffic Management parameters table." INDEX { adnEquipType, adnEquipIndex, adnHscBoardTrMgtOBLineAssig } ::= { adnHscBoardTrMgtTable 1 } AdnHscBoardTrMgtEntry ::= SEQUENCE { adnHscBoardTrMgtOBLineAssig INTEGER, adnHscBoardTrMgtHOBSize INTEGER, adnHscBoardTrMgtMOBSize INTEGER, adnHscBoardTrMgtLOBSize INTEGER, adnHscBoardTrMgtHOBSCDTh INTEGER, adnHscBoardTrMgtMOBSCDTh INTEGER, adnHscBoardTrMgtLOBSCDTh INTEGER, adnHscBoardTrMgtHOBEFCIOnTh INTEGER, adnHscBoardTrMgtMOBEFCIOnTh INTEGER, adnHscBoardTrMgtLOBEFCIOnTh INTEGER, adnHscBoardTrMgtHOBEFCIOffTh INTEGER, adnHscBoardTrMgtMOBEFCIOffTh INTEGER, adnHscBoardTrMgtLOBEFCIOffTh INTEGER, adnHscBoardTrMgtHOBObsTh INTEGER, adnHscBoardTrMgtMOBObsTh INTEGER, adnHscBoardTrMgtLOBObsTh INTEGER, adnHscBoardTrMgtOBStatus INTEGER (-2147483648..2147483647), adnHscBoardTrMgtHOBCounter Counter, adnHscBoardTrMgtMOBCounter Counter, adnHscBoardTrMgtLOBCounter Counter, adnHscBoardTrMgtMOBSCDCounter Counter, adnHscBoardTrMgtLOBSCDCounter Counter, adnHscBoardTrMgtMOBEFCICounter Counter, adnHscBoardTrMgtLOBEFCICounter Counter, adnHscBoardTrMgtMOBTPDCounter Counter, adnHscBoardTrMgtLOBTPDCounter Counter, adnHscBoardTrMgtHOBObsCounter Counter, adnHscBoardTrMgtMOBObsCounter Counter, adnHscBoardTrMgtLOBObsCounter Counter } adnHscBoardTrMgtOBLineAssig OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the line number the output buffer is assigned to." ::= { adnHscBoardTrMgtEntry 1 } adnHscBoardTrMgtHOBSize OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the size of high priority output buffer; the allowed values are : - 115(cells) for BBT1B and BBE1B boards - 1..256(cells) for other HSC boards with output buffers." ::= { adnHscBoardTrMgtEntry 2 } adnHscBoardTrMgtMOBSize OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the size of medium priority output buffer; For BBTS1C boards : the value range of the size is 0..7255 (cells); For BBTP3C boards : the value range of the size is 0..3627 (cells); For the other HSC boards with output buffers : the value range of the size is 0..16383(cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B)." ::= { adnHscBoardTrMgtEntry 3 } adnHscBoardTrMgtLOBSize OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the size of low priority output buffer; For BBE1B and BBT1B boards : the allowed value is 2537(cells). For BBTS1C boards : adnHscBoardTrMgtLOBSize = 7256 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize. For BBTP3C boards : adnHscBoardTrMgtLOBSize = 3628 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize. For the other HSC boards with output buffers : adnHscBoardTrMgtLOBSize = 16384 - adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize." ::= { adnHscBoardTrMgtEntry 4 } adnHscBoardTrMgtHOBSCDTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Selective Cell Discard (SCD) threshold in high priority output buffer (OB); when the filling of the high priority OB reaches the threshold, any incoming cell which internal cell loss priority equal to 1 will be discarded; due to BGTOB chip constraint, the value of the threshold is the high priority OB size. (adnHscBoardTrMgtHOBSize)." ::= { adnHscBoardTrMgtEntry 5 } adnHscBoardTrMgtMOBSCDTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Selective Cell Discard (SCD) threshold in medium priority output buffer (OB); when the filling of the medium priority OB reaches the threshold, any incoming cell which internal cell loss priority equal to 1 will be discarded; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize(cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B)." ::= { adnHscBoardTrMgtEntry 6 } adnHscBoardTrMgtLOBSCDTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Selective Cell Discard (SCD) threshold in low priority output buffer (OB). when the filling of the low priority OB reaches the threshold, any incoming cell which internal cell loss priority is equal to 1 will be discarded; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize(cells); For BBE1B and BBT1B boards : the value is multiple of 256." ::= { adnHscBoardTrMgtEntry 7 } adnHscBoardTrMgtHOBEFCIOnTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in high priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; due to BGTOB chip constraint, the value of the threshold is adnHscBoardTrMgtHOBSize (cells); this is only relevant for HSC board with a high priority output buffer." ::= { adnHscBoardTrMgtEntry 8 } adnHscBoardTrMgtMOBEFCIOnTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in medium priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize; this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B).." ::= { adnHscBoardTrMgtEntry 9 } adnHscBoardTrMgtLOBEFCIOnTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in low priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize; this is only relevant for HSC board with a low priority output buffer." ::= { adnHscBoardTrMgtEntry 10 } adnHscBoardTrMgtHOBEFCIOffTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in high priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; due to BGTOB chip constraint, the value of the threshold is adnHscBoardTrMgtHOBSize (cells); this is only relevant for HSC board with a high priority output buffer." ::= { adnHscBoardTrMgtEntry 11 } adnHscBoardTrMgtMOBEFCIOffTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in medium priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize; this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B)." ::= { adnHscBoardTrMgtEntry 12 } adnHscBoardTrMgtLOBEFCIOffTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the Explicit Forward Congestion Indication (EFCI) desactivation threshold in low priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the EFCI desactivation threshold is equal to the activation threshold minus 1/10 of the activation threshold; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize; this is only relevant for HSC board with a low priority output buffer." ::= { adnHscBoardTrMgtEntry 13 } adnHscBoardTrMgtHOBObsTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the observation threshold in high priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtHOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtHOBSize - 1)(cells); this is not relevant for BBT1B and BBE1B boards." ::= { adnHscBoardTrMgtEntry 14 } adnHscBoardTrMgtMOBObsTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the observation threshold in medium priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtMOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtMOBSize - 1) (cells); this is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B).." ::= { adnHscBoardTrMgtEntry 15 } adnHscBoardTrMgtLOBObsTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the observation threshold in low priority output buffer; when the observation threshold is overpassed, the adnHscBoardTrMgtLOBObsCounter value increases; the value range of the threshold is 0..(adnHscBoardTrMgtLOBSize - 1) (cells); this is not relevant for BBT1B and BBE1B boards." ::= { adnHscBoardTrMgtEntry 16 } adnHscBoardTrMgtOBStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the output buffers overflows status. It is a bit map represented as a sum. The bit positions are : 1 : high priority output buffer overflow 2 : medium priority output buffer overflow 4 : low priority output buffer overflow N.B.1:When there is no overflow within an output buffer, the corresponding bit has the value '0'. N.B.2:For BBE1B and BBT1B boards, bit position 2 is not significant." ::= { adnHscBoardTrMgtEntry 17 } adnHscBoardTrMgtHOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of overflows on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer. expressed in milliseconds; counter #26 of the ATM core." ::= { adnHscBoardTrMgtEntry 18 } adnHscBoardTrMgtMOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of overflows on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B); expressed in milliseconds; counter #25 of the ATM core." ::= { adnHscBoardTrMgtEntry 19 } adnHscBoardTrMgtLOBCounter OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the duration of overflows on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer; expressed in milliseconds; counter #19 of the ATM core." ::= { adnHscBoardTrMgtEntry 20 } adnHscBoardTrMgtMOBSCDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Selective Cell Discard(SCD) activations on medium priority output buffer; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B)." ::= { adnHscBoardTrMgtEntry 21 } adnHscBoardTrMgtLOBSCDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Selective Cell Discard (SCD) activations on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer." ::= { adnHscBoardTrMgtEntry 22 } adnHscBoardTrMgtMOBEFCICounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on medium priority output buffer; counter #2 of the ATM core; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B)." ::= { adnHscBoardTrMgtEntry 23 } adnHscBoardTrMgtLOBEFCICounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Explicit Forward Congestion Indication (EFCI) activations on low priority output buffer; counter #3 of the ATM core; this counter is not relevant for HSC boards without a low priority output buffer and for BBE1B and BBT1B boards." ::= { adnHscBoardTrMgtEntry 24 } adnHscBoardTrMgtMOBTPDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Tail Packet Discard (TPD) activations on medium priority output buffer; counter #4 of the ATM core; this counter is not relevant for HSC boards without a medium priority output buffer (e.g. BBT1B and BBE1B), the BBTP3C boards and for the BBTS1C boards." ::= { adnHscBoardTrMgtEntry 25 } adnHscBoardTrMgtLOBTPDCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Tail Packet Discard (TPD) activations on low priority outpur buffer; counter #5 of the ATM core; this counter is not relevant for HSC boards without a low priority output buffer, for the BBE1B boards, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards." ::= { adnHscBoardTrMgtEntry 26 } adnHscBoardTrMgtHOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of observation threshold overpassings on high priority output buffer; this counter is not relevant for HSC boards without a high priority output buffer, for the BBE1B, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards." ::= { adnHscBoardTrMgtEntry 27 } adnHscBoardTrMgtMOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of observation threshold overpassings on medium priority output buffer; this counter is not relevant for HSC boards board without a medium priority output buffer (e.g. BBT1B and BBE1B) and the BBTP3C boards and for the BBTS1C boards." ::= { adnHscBoardTrMgtEntry 28 } adnHscBoardTrMgtLOBObsCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of observation threshold overpassings on low priority output buffer; this counter is not relevant for HSC boards without a low priority output buffer, the BBE1B, the BBT1B boards, the BBTP3C boards and for the BBTS1C boards." ::= { adnHscBoardTrMgtEntry 29 } adnAseBoardTrMgtGroup OBJECT IDENTIFIER ::= { adnNodeSupervisionMIB 26 } adnAseBoardTrMgtSCDTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Selective Cell Discard (SCD) threshold; when the filling of the FIFO reaches the threshold, any incoming low priority cell will be discarded; the value range of this threshold is 0..255(cells); this is relevant only for the BBASEB matrix board." ::= { adnAseBoardTrMgtGroup 1 } adnAseBoardTrMgtHMP0ObsTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the first observation threshold; when the observation threshold is exceeded, the adnAseBoardTrMgtObs1Counter increases each time a cell is received; the value range of this threshold is 0..255(cells); this is relevant only for the matrix board." ::= { adnAseBoardTrMgtGroup 2 } adnAseBoardTrMgtHMP1ObsTh OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the second observation threshold; when the observation threshold is exceeded, the adnAseBoardTrMgtObs2Counter increases each time a cell is received; the value range of this threshold is 0..255(cells); this is relevant only for the matrix board." ::= { adnAseBoardTrMgtGroup 3 } adnAseBoardTrMgtOBStatus OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if cells are discarded because of FIFO overflow or Selective Cell Discard (SCD). It is a bit map represented as a sum. The bit positions are : 1 : Selective Cell Discard activated 2 : FIFO overflow N.B.:When there is neither overflow nor SCD activation, the corresponding bit has the value '0'. this is relevant only for the BBASEB matrix board." ::= { adnAseBoardTrMgtGroup 4 } adnAseBoardTrMgtK OBJECT-TYPE SYNTAX INTEGER -- UNITS percentage ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Connection Admission Control (CAC) overbooking factor for all AEI ports, expressed as a percentage; the value range of this percentage is 100..1000; this is relevant only for the matrix board." ::= { adnAseBoardTrMgtGroup 5 } adnAseBoardTrMgtKUbr OBJECT-TYPE SYNTAX AdnPercent ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the overbooking factor allowed for Unspecified Bit Rate (UBR) connections; the percentage is used to calculate the allocated bandwidth of UBR connections; this is relevant only for the BBASEB matrix board." ::= { adnAseBoardTrMgtGroup 6 } adnAseBoardTrMgtIFR OBJECT-TYPE SYNTAX AdnPercent ACCESS read-write STATUS mandatory DESCRIPTION "This indicates the Interface Filling Rate (IFR) for all AEI ports; this is relevant only for the matrix board." ::= { adnAseBoardTrMgtGroup 7 } adnAseBoardTrMgtSCDCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of low priority cells lost due to Selective Cell Discard (SCD); counter #26 of the ATM core; this counter is only relevant for the BBASEB matrix board." ::= { adnAseBoardTrMgtGroup 8 } adnAseBoardTrMgtOVFLCounter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of high priority cells lost due to buffer overflow; counter #27 of the ATM core; this counter is only relevant for the BBASEB matrix board." ::= { adnAseBoardTrMgtGroup 9 } adnAseBoardTrMgtObs1Counter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of cells received since the first observation threshold is exceeded; counter #0 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAseBoardTrMgtGroup 10 } adnAseBoardTrMgtObs2Counter OBJECT-TYPE SYNTAX Counter -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of cells received since the second observation threshold is exceeded; counter #1 of the ATM core; this counter is only relevant for the matrix board." ::= { adnAseBoardTrMgtGroup 11 } adnUCNodeErrorsAtmsup OBJECT IDENTIFIER ::= { adnUCNodeErrors 17 } adnUCNodeErrorsAtmsupIncTranId OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 1 } adnUCNodeErrorsAtmsupIncTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 2 } adnUCNodeErrorsAtmsupIncIndex OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 3 } adnUCNodeErrorsAtmsupSta OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 6 } adnUCNodeErrorsAtmsupDM OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 8 } adnUCNodeErrorsAtmsupValue OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmsup 11 } adnCESBufferUnderBegin TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, atmfCESCbrIndex, ifName } DESCRIPTION " This TRAP indicates that a cell starvation condition, confirmed after a persistency check, has begun on the Circuit Emulation Service connection. A cell starvation condition means that no more ATM cells are received on the ATM connection supporting the Circuit Emulation Service connection which means an underflow in the received cells buffer The persistency check consists in waiting a certain time (default value is 2.5 s) before sending the alarm " ::= 19 adnCESBufferUnderEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, atmfCESCbrIndex, ifName } DESCRIPTION " This TRAP indicates that a cell starvation condition has ended on the Circuit Emulation Service connection. A cell starvation condition means that no more ATM cells are received on the ATM connection supporting the Circuit Emulation Service connection which means an underflow in the received cells buffer" ::= 20 adnCES OBJECT IDENTIFIER ::= { adnProprietary 20 } adnCESConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnCESConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of extra parameters associated to a Circuit Emulation Service connection. " ::= { adnCES 1 } adnCESConfEntry OBJECT-TYPE SYNTAX AdnCESConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extra parameters for describing a Circuit Emulation Service connection. " INDEX { atmfCESCbrIndex } ::= { adnCESConfTable 1 } AdnCESConfEntry ::= SEQUENCE { adnCESClockMode INTEGER, adnCESTrunkCondData INTEGER, adnCESCondSignal INTEGER, adnCESUpDownTrapEnable INTEGER } adnCESClockMode OBJECT-TYPE SYNTAX INTEGER { useAtmfClockMode(1), looptiming(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It defines the synchronization mode associated to the Circuit Emulation Service connection: - use the value defined in atmfCESCbrClockMode - loop timing: proprietary mode used when the line is in loop timing mode " ::= { adnCESConfEntry 1 } adnCESTrunkCondData OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "It specifies the pattern to be sent in the data timeslot when trunk conditioning (fault condition) on Constant Bit Rate interface is activated. It only applies to structured data transfer service. " ::= { adnCESConfEntry 2 } adnCESCondSignal OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "It specifies the pattern to be sent in the signalling nibble (ABCD bits of CAS signalling) when trunk conditioning (fault condition) on Constant Bit Rate interface is activated. It only applies to structured data transfer service. " ::= { adnCESConfEntry 3 } adnCESUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " It indicates whether Circuit Emulation Service trap should be generated on the Constant Bit Rate interface. " ::= { adnCESConfEntry 4 } adnX3ErrorBeg TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, dsx3LineIndex, adnX3CauseError } DESCRIPTION "Indicates that a failure has appeared on the DS3/E3 interface." ::= 2 adnX3ErrorEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, dsx3LineIndex, adnX3CauseError } DESCRIPTION "Indicates that a failure has been cleared on the DS3/E3 interface." ::= 1 adnX3CauseError OBJECT-TYPE SYNTAX INTEGER { ds3e3LOS(0), ds3e3Unused1(1), ds3e3AIS(2), ds3e3RcvRDI(3), ds3e3Pbit(4), ds3e3Cbit(5), ds3e3CbitFEBE(6), ds3e3LOF(7), ds3e3Unused8(8), ds3e3FEBE(9), ds3e3RcvRDIP(10), ds3e3BIP8(11), ds3e3PlcpLOF(12), ds3e3UnavailablePeriod(13), ds3e3Perf15(14), ds3e3PerfDay(15), ds3e3LOCD(16), ds3e3CorrectedHEC(17), ds3e3UncorrectedHEC(18), ds3e3Unused19(19), ds3e3PlcpOOF(20), ds3e3LCV(21), ds3e3UpwardsFIFO(22), ds3e3Unused23(23), ds3e3Unused24(24), ds3e3Unused25(25), ds3e3DownwardsFIFO(26), ds3e3Unused27(27), ds3e3IdleCode(28), ds3e3OOF(29), ds3e3HBER(30), ds3e3AppModeChange(31) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The cause of the DS3/E3 trap currently being sent. This variable occurs as a variable-binding of an SNMP Trap PDU." ::= { adnTrapVars 9 } adnRs232 OBJECT IDENTIFIER ::= { adnTransmission 33 } adnRs232InSigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnRs232InSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port input control signal entries, implemented and visible to the software on the port, and useful to monitor." ::= { adnRs232 1 } adnRs232InSigEntry OBJECT-TYPE SYNTAX AdnRs232InSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Input control signal status for a hardware port." INDEX { adnRs232InSigPortIndex, adnRs232InSigName } ::= { adnRs232InSigTable 1 } AdnRs232InSigEntry ::= SEQUENCE { adnRs232InSigPortIndex InterfaceIndex, adnRs232InSigName INTEGER, adnRs232InSigState INTEGER, adnRs232InSigChanges Counter, adnRs232InSigDuration Counter } adnRs232InSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The value of adnRs232PortIndex for the port to which this entry belongs." ::= { adnRs232InSigEntry 1 } adnRs232InSigName OBJECT-TYPE SYNTAX INTEGER { tm(1), lal(2), rdl(3), x21cont(4), x21ind(5), cts(6), dsr(7), dcd(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Identification of a hardware input signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 to provide an index to object adnRs232InSigDuration. " REFERENCE "Identification of a hardware input signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 to provide an index to object adnRs232InSigDuration. " ::= { adnRs232InSigEntry 2 } adnRs232InSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current input signal state." ::= { adnRs232InSigEntry 3 } adnRs232InSigChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the input signal has changed from 'on' to 'off' or from 'off' to 'on'. 'NoSuchInstance' is returned in case of the HBCEU board." ::= { adnRs232InSigEntry 4 } adnRs232InSigDuration OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The duration the input signal has been in the 'on' state for the tm(1), cts(6), dsr(7), dcd(8) signals of the HBCEU board. The duration the input signal has been in the 'off' state for the x21ind(5) signal of the HBCEU board." ::= { adnRs232InSigEntry 5 } adnRs232OutSigTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnRs232OutSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port output control signal entries, implemented and visible to the software on the port, and useful to monitor." ::= { adnRs232 2 } adnRs232OutSigEntry OBJECT-TYPE SYNTAX AdnRs232OutSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Output control signal status for a hardware port." INDEX { adnRs232OutSigPortIndex, adnRs232OutSigName } ::= { adnRs232OutSigTable 1 } AdnRs232OutSigEntry ::= SEQUENCE { adnRs232OutSigPortIndex InterfaceIndex, adnRs232OutSigName INTEGER, adnRs232OutSigState INTEGER, adnRs232OutSigChanges Counter } adnRs232OutSigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The value of adnRs232PortIndex for the port to which this entry belongs." ::= { adnRs232OutSigEntry 1 } adnRs232OutSigName OBJECT-TYPE SYNTAX INTEGER { tm(1), lal(2), rdl(3), x21cont(4), x21ind(5), cts(6), dsr(7), dcd(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Identification of a hardware output signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 for consistency with object adnRs232InSigName. The cts, dsr and dcd signals aren't used in adnRs232OutSigTable. " REFERENCE "Identification of a hardware output signal, as follows: tm Test Mode lal Local Loop rdl Remote Loop x21cont X.21 Control x21ind X.21 Indication cts Clear To Send dsr Data Set Ready dcd Received Line Signal Detector The cts, dsr and dcd signals are repeated from RFC 1659 for consistency with object adnRs232InSigName. The cts, dsr and dcd signals aren't used in adnRs232OutSigTable. " ::= { adnRs232OutSigEntry 2 } adnRs232OutSigState OBJECT-TYPE SYNTAX INTEGER { none(1), on(2), off(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current output signal state." ::= { adnRs232OutSigEntry 3 } adnRs232OutSigChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the output signal has changed from 'on' to 'off' or from 'off' to 'on'. 'NoSuchInstance' is returned in case of the HBCEU board." ::= { adnRs232OutSigEntry 4 } adnRs232PortTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnRs232PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port entries." ::= { adnRs232 3 } adnRs232PortEntry OBJECT-TYPE SYNTAX AdnRs232PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ADN specific parameters values for a port." INDEX { adnRs232PortIndex } ::= { adnRs232PortTable 1 } AdnRs232PortEntry ::= SEQUENCE { adnRs232PortIndex InterfaceIndex, adnRs232PortDuration Counter } adnRs232PortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The value of ifIndex of the port " ::= { adnRs232PortEntry 1 } adnRs232PortDuration OBJECT-TYPE SYNTAX Counter -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The duration for which the line has been in the 'off' state. This object applies to V35 and V36 lines of the HBCEU board. The 'off' state of the line is defined by : NOT (dcd up AND tm down AND (dsr up OR cts up))." ::= { adnRs232PortEntry 2 } adnAtmInterfaceTCErrorBeg TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmInterfaceTCCauseError } DESCRIPTION "Indicates that an error or warning has been detected by the Transmission/Convergence (TC) layer of the ATM interface. This error or warning is always confirmed. To be confirmed, an error must occur a designated number of times during a given period of time." ::= 13 adnAtmInterfaceTCErrorEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmInterfaceTCCauseError } DESCRIPTION "Indicates that a failure has been cleared on the ATM interface." ::= 14 adnAtmSaalDown TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmSaalVpi, adnAtmSaalVci, adnAtmSaalAdminStatus, adnAtmSaalOperStatus } DESCRIPTION "A problem occured on a Signalling ATM Adaptation Layer (SAAL) connection. This connection is not established." ::= 15 adnAtmSaalUp TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmSaalVpi, adnAtmSaalVci, adnAtmSaalAdminStatus, adnAtmSaalOperStatus } DESCRIPTION "The SAAL connection is established." ::= 16 adnAtmSigCniCheckDown TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmSigVpi, adnAtmSigVci, adnAtmSigCniCheckingState } DESCRIPTION "A problem occured during the CANP Network Interface (CNI) checking phase of an ATM trunk." ::= 17 adnAtmSigCniCheckUp TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmSigVpi, adnAtmSigVci } DESCRIPTION "After disappearance of the error or warning, a trap is sent to NMS to indicate the return to a normal state." ::= 18 adnAtmCconnectDown TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmVpi, adnAtmVci, adnAtmCconnectIndex, adnAtmCconnectAdminStatus, adnAtmCconnectOperStatus, adnAtmCcCauseError, adnAtmCconnectLastCanpCause, adnAtmCconnectLastErrorNodeID, adnAtmCconnectLastLocation, adnAtmCconnectLastCause, adnAtmCconnectLastDiag, adnAtmCconnectLastMachine, adnAtmCconnectLastArea, adnAtmCconnectLastChassis, adnAtmCconnectLastSlot } DESCRIPTION "Specifies the cause of the error or warning that occurred on an ATM cross-connection. The ATM cross-connection can be at either VP or VC level. At VP level, the adnAtmVci variable is not significant (equals 0)." ::= 6 adnAtmCconnectUp TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, adnAtmVpi, adnAtmVci, adnAtmCconnectIndex, adnAtmCconnectAdminStatus, adnAtmCconnectOperStatus } DESCRIPTION "After disappearance of the error or warning, a trap is sent to NMS to indicate the return to a normal state. The ATM cross-connection can be either at VP or VC level. At VP level, the adnAtmVci variable is not significant (0)." ::= 7 adnAtmInterfaceConfError TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex, ifAdminStatus, ifOperStatus, adnAtmInterfaceCauseError } DESCRIPTION "Specifies a configuration inconsistency between two ATM trunks (CNIs)." ::= 8 adnAtmVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Virtual Path Index (VPI) value on the ATM interface. Always significant." ::= { adnTrapVars 14 } adnAtmVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Virtual Channel Index (VCI) value on the ATM interface. The not significant value is 0." ::= { adnTrapVars 15 } adnAtmCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Index of the ATM cross-connection." ::= { adnTrapVars 16 } adnAtmCconnectAdminStatus OBJECT-TYPE SYNTAX AdnAtmAdminStatus ACCESS not-accessible STATUS mandatory DESCRIPTION "Value that identifies the administrative status of an ATM cross-connection." ::= { adnTrapVars 17 } adnAtmCconnectOperStatus OBJECT-TYPE SYNTAX AdnAtmUniOperStatus ACCESS not-accessible STATUS mandatory DESCRIPTION "Value that identifies the current operational status of an ATM cross-connection." ::= { adnTrapVars 18 } adnAtmCcCauseError OBJECT-TYPE SYNTAX INTEGER { adnAtmCconnectMaxAttempts(1), adnAtmCconnectConfError(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Cause of the User to Network Interface (UNI) cross- connection trap currently being sent. Occurs as a variable- binding of an SNMP Trap Packet Data. Unit (PDU)." ::= { adnTrapVars 19 } adnAtmCconnectLastCanpCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Last Cell Alcatel Network Protocol (CANP) cause." ::= { adnTrapVars 26 } adnAtmCconnectLastErrorNodeID OBJECT-TYPE SYNTAX AdnRoutingID ACCESS not-accessible STATUS mandatory DESCRIPTION "The identifier of the node detecting the error." ::= { adnTrapVars 27 } adnAtmCconnectLastLocation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM forum location value in the cause information element." ::= { adnTrapVars 28 } adnAtmCconnectLastCause OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM forum cause value in the cause information element." ::= { adnTrapVars 29 } adnAtmCconnectLastDiag OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM forum diagnostic value in the cause information element." ::= { adnTrapVars 30 } adnAtmInterfaceTCCauseError OBJECT-TYPE SYNTAX INTEGER { atmtcUnused0(0), atmtcUnused1(1), atmtcUnused2(2), atmtcUnused3(3), atmtcUnused4(4), atmtcUnused5(5), atmtcUnused6(6), atmtcUnused7(7), atmtcUnused8(8), atmtcUnused9(9), atmtcPlcpRcvRDI(10), atmtcUnused11(11), atmtcPlcpLOF(12), atmtcUnused13(13), atmtcUnused14(14), atmtcUnused15(15), atmtcLOCD(16), atmtcCorrectedHEC(17), atmtcUncorrectedHEC(18), atmtcUnused19(19), atmtcUnused20(20), atmtcUnused21(21), atmtcUpwardsFIFO(22), atmtcUnused23(23), atmtcUnused24(24), atmtcETtoLTLoss(25), atmtcUnused26(26), atmtcUnused27(27), atmtcUnused28(28), atmtcUnused29(29), atmtcUnused30(30), atmtcUnused31(31) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable that gives the cause of the ATM interface Transmission/Convergence trap currently being sent. Occurs as a variable-binding of an SNMP trap PDU." ::= { adnTrapVars 31 } adnAtmCconnectLastMachine OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The machine number part of adnAtmCconnectLastErrorNodeID." ::= { adnTrapVars 42 } adnAtmCconnectLastArea OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The area number part of adnAtmCconnectLastErrorNodeID." ::= { adnTrapVars 43 } adnAtmCconnectLastChassis OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The chassis number detecting the error." ::= { adnTrapVars 44 } adnAtmCconnectLastSlot OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The slot number of the board detecting the error." ::= { adnTrapVars 45 } adnDsx1ErrorBeg TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, dsx1LineIndex, adnDsx1ErrorCause } DESCRIPTION "Indicates that a failure has appeared on the DS1/E1 interface." ::= 11 adnDsx1ErrorEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, dsx1LineIndex, adnDsx1ErrorCause } DESCRIPTION "Indicates that a failure has been cleared on the DS1/E1 interface." ::= 12 adnDsx1ErrorCause OBJECT-TYPE SYNTAX INTEGER { ds1e1LOS(0), ds1e1Unused1(1), ds1e1AIS(2), ds1e1RcvRDI(3), ds1e1Unused4(4), ds1e1Unused5(5), ds1e1Unused6(6), ds1e1LOF(7), ds1e1Unused8(8), ds1e1Unused9(9), ds1e1Unused10(10), ds1e1Unused11(11), ds1e1Unused12(12), ds1e1UnavailablePeriod(13), ds1e1Perf15(14), ds1e1PerfDay(15), ds1e1Unused16(16), ds1e1TS16AIS(17), ds1e1RSA(18), ds1e1LSMA(19), ds1e1Unused20(20), ds1e1HBER(21), ds1e1Unused22(22), ds1e1RLB(23), ds1e1Unused24(24), ds1e1Unused25(25), ds1e1Unused26(26), ds1e1Unused27(27), ds1e1Unused28(28), ds1e1Unused29(29), ds1e1LCMA(30), ds1e1Unused31(31) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The cause of the DS1/E1 trap currently being sent. This variable occurs as a variable-binding of an SNMP Trap PDU." ::= { adnTrapVars 33 } adnPmdDumpFileReady TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnPmdDumpFilePathName, adnPmdNodeSurveillance, adnPmdDumpExecutionReport, adnPmdFrequencyCount, adnPmdTargetIdentification } DESCRIPTION "The main PMD application sends this trap to the NMS to indicate that a PMD file is ready for collection. The full name of the PMD file is given. If adnPmdDumpExecutionReport has the value `alreadyBuilt', a PMD file already exists for the same fault, and the requested PMD has not been built. This fault has occurred for the adnPmdFrequencyCount time(s). adnPmdNodeSurveillance is set if the file has to be picked up by the NMS. This variable can be modified only by the NMS. adnPmdTargetIdentification indicates the chassis, slot and processor where the PMD has been built." ::= 11 adnPmdFailed TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnPmdDumpExecutionReport, adnPmdFailedDiagnostic, adnPmdNodeSurveillance, adnPmdTargetIdentification } DESCRIPTION "The main PMD application sends this trap to the NMS to indicate that a PMD has failed. If the PMD started and failed during execution, adnPmdDumpExecutionReport returns an error code of 'aborted'. If the PMD never started, then adnPmdDumpExecutionReport returns error code 'nok' (not okay). adnPmdNodeSurveillance is set if the file has to be picked up by the NMS. This variable can be modified only by the NMS. This variable is not relevant for the trap adnPmdFailed because the file has not been built. adnPmdTargetIdentification indicates the chassis, slot and processor where the PMD has failed." ::= 12 adnPmdMscCrashIndication TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnPmdMscCrashClass, adnPmdMscCrashOrigin, adnPmdMscCrashTime, adnPmdTargetIdentification } DESCRIPTION "The main PMD sub-system sends this trap to the NMS to indicate that a crash occurred on a MSC (Medium Speed Coupler). This trap is only a crash quick report. To get more information, the operator has to check the PMD file (if it has been authorized to be created : see adnPmdMib)." ::= 20 adnPmdDumpFilePathName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "PMD pathname built in the NMS transfer directory." ::= { adnTrapVars 21 } adnPmdDumpExecutionReport OBJECT-TYPE SYNTAX INTEGER { ok(1), aborted(2), alreadyBuilt(3), nok(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "If the PMD has actually been built, it is ok(1). If it has not been built because the filter mechanism knows that a PMD was previously built for the same fault, it is alreadyBuilt(3), and the file name is filled with the known value." ::= { adnTrapVars 22 } adnPmdFailedDiagnostic OBJECT-TYPE SYNTAX INTEGER { other(1), badMessageReceived(2), noDataToDump(3), softwareInconsistency(4), cannotOpenFile(5), writeError(6), unixMoveError(7), unixCompressError(8), nectarMaintUnav(9), nectarMaintErrorReport(10), timeOut(11) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The diagnostic is sent to explain why the PMD failed. The significance of each value is described in the document 3CB00572AAAAUBZZA." REFERENCE "The diagnostic is sent to explain why the PMD failed. The significance of each value is described in the document 3CB00572AAAAUBZZA." ::= { adnTrapVars 23 } adnPmdFrequencyCount OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable indicates how often a particular fault is occurring." ::= { adnTrapVars 24 } adnPmdTargetIdentification OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable indicates the processor experiencing the fault. The variable is expressed with 5 digits. The first one gives the chassis number, the next two digits give the slot number and the two last digits give the processor number. So, the value CSSPP means that the PMD has been generated by the processor PP of the slot SS of the chassis C." ::= { adnTrapVars 25 } adnPmdMscCrashClass OBJECT-TYPE SYNTAX INTEGER { unknown(-1), stop(0), str(1), system(2), other(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This field contains the class of the crash: - unknown(-1): the processor has been reset by an . external cause. - stop(0) : the reset has been asked by an process. - str(1) : a fatal str occurred. - system(2) : an exception or a system panic . occurred. - other(3) : other." ::= { adnTrapVars 34 } adnPmdMscCrashOrigin OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "This field depends on the adnPmdMscCrashClass. If adnPmdMscCrashClass is 'str' then the str name is given. If adnPmdMscCrashClass is 'stop' the process name is given. If adnPmdMscCrashClass is 'system' the name of running process when the fault occurred is given." ::= { adnTrapVars 35 } adnPmdMscCrashTime OBJECT-TYPE SYNTAX AdnNodeTimeTicks ACCESS not-accessible STATUS mandatory DESCRIPTION "This field is used to give the time the crash occurred at the MSC (Medium Speed Coupler) level." ::= { adnTrapVars 36 } adnTrapSonetBeg TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnSonetTrapCause } DESCRIPTION "Indicates that a failure has appeared on the Sonet/SDH interface." ::= 4 adnTrapSonetEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnSonetTrapCause } DESCRIPTION "Indicates that a failure has been cleared on the Sonet/SDH interface." ::= 3 adnSonetTrapCause OBJECT-TYPE SYNTAX INTEGER { sonetSectionLOS(0), sonetUnused1(1), sonetLineAIS(2), sonetLineRcvRDI(3), sonetUnused4(4), sonetLineHighBIP(5), sonetUnused6(6), sonetSectionLOF(7), sonetPathAIS(8), sonetPathFEBE(9), sonetPathRcvRDI(10), sonetPathBIP8(11), sonetPathLOP(12), sonetITUperfUnAvailablePeriod(13), sonetITUperf15(14), sonetITUperfDay(15), sonetTCOCD(16), sonetTCCorrectedHEC(17), sonetTCUnCorrectedHEC(18), sonetUnused19(19), sonetUnused20(20), sonetUnused21(21), sonetTCUpBufferOverflow(22), sonetMediumLaserDegradation(23), sonetMediumLaserTransmitSignalOut(24), sonetTCETtoLTLoss(25), sonetTCDownBufferOverflow(26), sonetMediumAppliqueFailure(27), sonetLineBIP(28), sonetSectionOOF(29), sonetUnused30(30), sonetUnused31(31), sonetBadBoardType(100) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable that gives cause of the Sonet trap currently being sent. Occurs as a variable-binding of an SNMP trap." ::= { adnTrapVars 10 } adnTrapATMCellLossBeg TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipType, adnEquipIndex, adnHscBoardTrMgtOBLineAssig, adnAtmCellLossTrapCause } DESCRIPTION "Indicates that cells are discarded because of FIFO overflow." ::= 9 adnTrapATMCellLossEnd TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipType, adnEquipIndex, adnHscBoardTrMgtOBLineAssig, adnAtmCellLossTrapCause } DESCRIPTION "Indicates that the discard of cells has been stopped." ::= 10 adnAtmCellLossTrapCause OBJECT-TYPE SYNTAX INTEGER { hmpOverflow(1), highOBOverflow(2), medOBOverflow(3), lowOBOverflow(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Variable that gives cause of the ATM Traffic Management trap currently being sent. Occurs as a variable-binding of an SNMP trap." ::= { adnTrapVars 32 } adnHSSEquipStatusChange TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipType, adnEquipIndex, adnEquipX731Admin, adnEquipX731Oper, adnEquipX731Usage, adnEquipX731Avail, adnEquipInstallStatus, adnEquipControlStatus, adnEquipCause } DESCRIPTION "This trap indicates that the indicated equipment has changed state. The trap is sent only if adnEquipTrapEnableMask has the bit set for the state or status that changed." ::= 2 adnEquipCause OBJECT-TYPE SYNTAX AdnEquipCause ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable indicates the specific cause of the problem which has occurred on the equipment (chassis or board)." ::= { adnTrapVars 8 } adnHSSBoardSwitchover TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipIndex, adnBoardRedundantBind } DESCRIPTION "This trap indicates that a board switchover occurred." ::= 18 adnHSSBoardSwitchback TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipIndex, adnBoardRedundantBind } DESCRIPTION "This trap indicates that a board switchback occurred." ::= 19 adnClockStatusChange TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipType, adnEquipIndex, adnChassisMidplaneClockStatus, adnChassisClockPropagationStatus } DESCRIPTION "This trap signifies that one or more clocks on the indicated chassis have changed state." ::= 14 adnBbsynBoardAlarm TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipIndex, adnBoardFaultStatus } DESCRIPTION "This trap indicates an alarm from the BBSYN board." ::= 17 adnHssStr TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnHssStrName, adnHssStrHeader, adnHssStrMoreInfo, adnHssStrYear, adnHssStrMonth, adnHssStrDay, adnHssStrHour, adnHssStrMinute, adnHssStrSecond, adnHssStrLevel, adnHssStrNode, adnHssStrBoardType, adnHssStrChassis, adnHssStrSlot, adnHssStrProcessor, adnHssStrSwpid, adnHssStrStadd, adnHssStrFile, adnHssStrLine, adnHssStrPc, adnHssStrObject, adnHssStrErrorCode } DESCRIPTION "This trap indicates that a Software Trouble Report occurred inside the HSS " ::= 13 adnHssStrName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The STR identifier within the HSS. This is a number unique to a specific STR event type." ::= { adnTrapVars 11 } adnHssStrHeader OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS obsolete DESCRIPTION "Header information in the STR which includes: STR indentifier (adnHssStrName) date and time urgency level sender identifier (node, board type, chassis, slot, processor) software package information" ::= { adnTrapVars 12 } adnHssStrMoreInfo OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "Additional information eventually contained in the STR. This field may be empty." ::= { adnTrapVars 13 } adnHssStrYear OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The year of the STR appearance." ::= { adnTrapVars 46 } adnHssStrMonth OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The month of the STR appearance." ::= { adnTrapVars 47 } adnHssStrDay OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The day of the STR appearance." ::= { adnTrapVars 48 } adnHssStrHour OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The hour of the STR appearance." ::= { adnTrapVars 49 } adnHssStrMinute OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The minute of the STR appearance." ::= { adnTrapVars 50 } adnHssStrSecond OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The second of the STR appearance." ::= { adnTrapVars 51 } adnHssStrLevel OBJECT-TYPE SYNTAX INTEGER { nonFatal(1), applFatal(2), procFatal(3), boardFatal(4), nodeFatal(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The STR level : 1 : fatal for nobody 2 : fatal for the sending application 3 : fatal for the local processor 4 : fatal for the local board 5 : fatal for the node." ::= { adnTrapVars 52 } adnHssStrNode OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Identify the node where the STR appears." ::= { adnTrapVars 53 } adnHssStrBoardType OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Board type of the board where the STR appears. (Used only by HSS development teams. The values are described in gif_hss_equip.h .)" ::= { adnTrapVars 54 } adnHssStrChassis OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Chassis identifier in the node where the STR appears." ::= { adnTrapVars 55 } adnHssStrSlot OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Slot identifier in the chassis where the STR appears." ::= { adnTrapVars 56 } adnHssStrProcessor OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Processor number on the board where the STR appears." ::= { adnTrapVars 57 } adnHssStrSwpid OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The software package identifier." ::= { adnTrapVars 58 } adnHssStrStadd OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Address of the software package." ::= { adnTrapVars 59 } adnHssStrFile OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The source file name." ::= { adnTrapVars 60 } adnHssStrLine OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Line number in the source file." ::= { adnTrapVars 61 } adnHssStrPc OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Program counter." ::= { adnTrapVars 62 } adnHssStrObject OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The action or object that triggers the STR" ::= { adnTrapVars 63 } adnHssStrErrorCode OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "Error code." ::= { adnTrapVars 64 } adnFRAIWOversizedSDU TRAP-TYPE ENTERPRISE { adnTrapsATM } VARIABLES { adnNodeTime, adnTrapCategory, ifName, ifIndex } DESCRIPTION " This TRAP indicates that at least one oversized AAL-SDU (ATM Adaptation Layer Service Data Unit) has been received on the indicated FR logical line." ::= 5 adnEquipStatusChange TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnEquipType, adnEquipIndex, adnEquipX731Admin, adnEquipX731Oper, adnEquipX731Usage, adnEquipX731Avail } DESCRIPTION "This trap signifies that the indicated equipment has changed state. The trap is sent only if adnEquipTrapEnableMask has the bit set for the state or status that changed." ::= 1 adnAmAccountingFileReady TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "This trap indicates whether the accounting file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services." ::= 3 adnFmAlarmFileReady TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "This trap indicates whether the alarm file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services." ::= 4 adnPmStatisticsFileReady TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "This trap indicates whether the historical or interval statistics file, whose path the object following adnTrapCategory defines, is ready to be transferred to the NMS via FTP services." ::= 5 adnConfigStatus TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnUCNodeOperCommand, adnUCNodeOperStatus, adnUCNodeState, adnUCNodeErrorType, adnUCNodeErrorStatus, adnUCNodeErrorGroup, adnUCNodeErrorCode, adnUCNodeExceptionCode, adnUCNodeErrorChassis, adnUCNodeErrorSlot, adnUCNodeErrorProc, adnUCNodeErrorTableName, adnUCNodeErrorIndex1, adnUCNodeErrorIndex2, adnUCNodeErrorIndex3, adnUCNodeErrorIndex4, adnUCNodeErrorNominator } DESCRIPTION "This trap is sent in response to each NMS command or state change." ::= 6 adnNodeResync TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnNodeRunningVersion, adnNodeCommittedVersion, adnNodeUncommittedVersion, adnSaConfigFrom } DESCRIPTION "This trap notifies the NMS that the CU board has been reinitialized." ::= 7 adnRoutingInaccuracyTrap TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "The first time the number of denied resource allocations exceeds a threshold during the previous 30 seconds, this trap is issued. When routing tables can again be successfully built during a threshold period, another trap is issued to clear this condition." ::= 8 adnRoutingInaccuracyTrapClear TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "After a potential routing table inaccuracy trap was sent, this trap generates to indicate that routing tables can be successfully built again. The number of denied resource allocations dropping lower than a threshold determines this change in condition." ::= 9 adnHssCuDownTrap TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "This trap is sent every time the node supervision sends a CU down message to ISOM." ::= 10 adnClockSourceUp TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName } DESCRIPTION "This trap indicates that a line configured to be a clock source has come up." ::= 15 adnClockSourceDown TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName } DESCRIPTION "This trap indicates that a line configured to be a clock source has gone down." ::= 16 adnFrVCSlowPoll TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, frPVCEndptDLCIIndex, adnFrVCLastClrCauseRX, adnFrVCLastClrDiagRX, adnFrVCRemNodeID, adnFrVCCos } DESCRIPTION "This trap is sent every time a PVC enters the slow poll state." ::= 1 adnFrVCExitSlowPoll TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, frPVCEndptDLCIIndex, adnFrVCCos } DESCRIPTION " This trap indicates the return to a normal PVC call setup attempt polling interval, after the call was in the slow poll state." ::= 2 adnFrVCDown TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, frPVCEndptDLCIIndex, adnFrVCAdminState, adnFrVCOperState, adnFrVCCos } DESCRIPTION "Indicates that the PVC has been set to 'down' by an NMS command." ::= 3 adnFrVCUp TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, frPVCEndptDLCIIndex, adnFrVCAdminState, adnFrVCOperState, adnFrVCCos } DESCRIPTION "Indicates that the switch will attempt to make calls or accept calls for a particular PVC. The NMS has allowed the PVC to be put into service." ::= 4 adnFrDiscardOn TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnTrapFrVCDLCIIndex, adnTrapFrCongsState, adnTrapFrIfType, adnTrapFrCongOrigin, adnTrapFrVCCos } DESCRIPTION "Indicates frame relay data is being discarded because of network congestion." ::= 5 adnFrDiscardOff TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnTrapFrVCDLCIIndex, adnTrapFrCongsState, adnTrapFrIfType, adnTrapFrCongOrigin, adnTrapFrVCCos } DESCRIPTION "Exit from frame relay data discarded because of network congestion." ::= 6 adnFrChanDiscardOn TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnTrapFrCongsState, adnTrapFrIfType, adnTrapFrCongOrigin } DESCRIPTION "Indicates frame relay data is being discarded at the channel level because of network congestion." ::= 7 adnFrChanDiscardOff TRAP-TYPE ENTERPRISE { adnTrapsFrameRelay } VARIABLES { adnNodeTime, adnTrapCategory, ifIndex, ifName, adnTrapFrCongsState, adnTrapFrIfType, adnTrapFrCongOrigin } DESCRIPTION "Exit from frame relay data discarded at the channel level because of network congestion." ::= 8 adnMIBTrapVarsEquipStatusText OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "If present in an adnEquipStatusChange trap, this object contains diagnostic text describing the reason for the equipment status change." ::= { adnTrapVars 1 } adnTrapCategory OBJECT-TYPE SYNTAX INTEGER { crucial(1), administrative(2), critical(3), major(4), minor(5), shtr(6), diagnostic(7), cleared(8) } ACCESS not-accessible STATUS mandatory DESCRIPTION "For the trap currently being sent, category of the trap that occurs as a variable-binding of an SNMP trap PDU." ::= { adnTrapVars 2 } adnTrapFrVCDLCIIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object defines the index of the DLCI of the local end of the VC." ::= { adnTrapVars 3 } adnTrapFrCongsState OBJECT-TYPE SYNTAX AdnCongestLevels ACCESS not-accessible STATUS mandatory DESCRIPTION "Current state of congestion for the affected channel or interface." ::= { adnTrapVars 4 } adnTrapFrIfType OBJECT-TYPE SYNTAX INTEGER { frs(1), franp(2), iwf(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of interface affected." ::= { adnTrapVars 5 } adnTrapFrCongOrigin OBJECT-TYPE SYNTAX INTEGER { ingress-vc(1), egress-vc(2), ingress-channel(3), egress-channel(4), egress-cuf(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Origin of the congestion trap." ::= { adnTrapVars 6 } adnTrapReason OBJECT-TYPE SYNTAX INTEGER { atm-line(1), fr-line(2), lis-link(3), lapf-lapd-link(4), nms-initiated(5), atm-interface(6), xfr-line(7), xcm-link(8), x25-gateway(9), x75-gateway(10), x25-link(11) } ACCESS not-accessible STATUS mandatory DESCRIPTION "The reason for sending this trap (usually, the type of the cause object). atm-line: ATM line, fr-line: Frame Relay line, lis-link: Local Inchannel Signalling (LIS) link, lapf-lapd-link: LAPF/LAPD protocol, nms-initiated: NMS-initiated via SNMP SET command, atm-interface: ATM interface, xfr-line: Alcatel protocol for Frame Relay PSX trunk, xcm-link: Alcatel protocol for X.25 PSX trunk, x25-gateway: X.25 link to other (non ACX) X.25 network, x75-gateway: X.75 link to other X.25 network, x25-link: PSX-ACX trunk (ACX is an X.25 PSX subscriber)." ::= { adnTrapVars 7 } adnAtmInterfaceCauseError OBJECT-TYPE SYNTAX INTEGER { adnAtmInterfaceBadUserNetFlg(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Cause of the ATM interface error trap." ::= { adnTrapVars 20 } adnTrapFrVCCos OBJECT-TYPE SYNTAX AdnFrCos ACCESS not-accessible STATUS mandatory DESCRIPTION "Class of Service for Frame Relay." ::= { adnTrapVars 67 } adnFlashUpdateStatus TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnBrdFlashChassisIndex, adnBrdFlashSlotIndex, adnBrdFlashUpdateErrorCode } DESCRIPTION "This trap is sent for each board whose on-line or off-line flash update fails." ::= 24 adnBrdFlashUpdateErrorCode OBJECT-TYPE SYNTAX INTEGER { msupTimeout(1), flashWriteError(2), offlineFlashUpdateError(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object identifies a specific error for flash update. Values are: msupTimeout - on-line flash update failed due to a Main Supervisor timeout. flashWriteError - on-line flash update failed due to a flash write error. offlineFlashUpdateError - off-line flash update failed." ::= { adnTrapVars 68 } adnFlashBuildStatus TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnBrdFlashChassisIndex, adnBrdFlashSlotIndex, adnBrdFlashBuildErrorCode } DESCRIPTION "This trap is sent for each board whose flash volume build fails." ::= 25 adnBrdFlashBuildErrorCode OBJECT-TYPE SYNTAX INTEGER { flashVolumeWriteError(1), openDescriptionFileError(2), descriptionFileSyntaxError(3), flashComponentFileMissing(4), nectarFileManagementError(5), otherError(6) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object identifies a specific error for flash build. flashVolumeWriteError - an error occured while creating or writing the flash volume file on the Control Unit. This may be a disk space problem. openDescriptionFileError - the flash description file can not be opened. This may be due to a permission problem or to the absence of this file on the Control Unit. descriptionFileSyntaxError - there is some syntax error within the description file. flashComponentFileMissing - a file to be gathered in the flash volume can not be found on the Control Unit. nectarFileManagementError - a Nectar File Management error occured. otherError - any error other than the above ones." ::= { adnTrapVars 69 } adnDumThresholdViolation TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory, adnDumDirectoryPathname, adnDumDirectoryPercentUsage, adnDumDirectoryLevelUsage } DESCRIPTION "This trap indicates that one of the thresholds for disk utilization in the managed filesystem under Disk Utilization Management in the Node Management Subsystem was violated." ::= 26 adnDumFileReady TRAP-TYPE ENTERPRISE { adnTrapsCommon } VARIABLES { adnNodeTime, adnTrapCategory } DESCRIPTION "This trap indicates that a file that the Network Management System normally retrieves from a managed node via FTP services is ready to be transferred to the Network Management System." ::= 27 adnIfAssocTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIfAssocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of point to point associations between the PSX/ACX internal link interfaces." ::= { adnProprietary 19 } adnIfAssocEntry OBJECT-TYPE SYNTAX AdnIfAssocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An association entry containing ifIndex of the first interface, adnNodeIndex of the first node, ifIndex of the associated interface, adnNodeIndex of the associated node and the type of protocol used on these interfaces." INDEX { adnFirstIfIndex } ::= { adnIfAssocTable 1 } AdnIfAssocEntry ::= SEQUENCE { adnFirstIfIndex INTEGER, adnFirstNodeIndex INTEGER, adnAssocIfIndex INTEGER, adnAssocNodeIndex INTEGER, adnProtocolType INTEGER } adnFirstIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the ifIndex of the first interface." ::= { adnIfAssocEntry 1 } adnFirstNodeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnNodeIndex of the first node." ::= { adnIfAssocEntry 2 } adnAssocIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the ifIndex of the associated interface, this value is not significant in the case where adnProtocolType is g25 or x75. In that case a GET request on this OID will be replied with the response noSuchname into error-status field." ::= { adnIfAssocEntry 3 } adnAssocNodeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnNodeIndex of the associated node, this value is not significant in the case where adnProtocolType is g25 or x75. In that case a GET request on this OID will be replied with the response noSuchname into error-status field." ::= { adnIfAssocEntry 4 } adnProtocolType OBJECT-TYPE SYNTAX INTEGER { xfr(1), xcm(2), x25(3), g25(4), x75(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object represents the protocol used on interfaces. xfr and xcm protocols are ALCATEL proprietary protocols that are used for PSX and ACX internal links. x25 is a standard protocol that is used for connecting an ACX configured as a concentrator to a PSX. g25 is an ALCATEL proprietary protocol that is used for connecting an ALCATEL 1100 NETWORK to another packet switching network via an X25 gateway link. x75 is a standard protocol used for connecting an ALCATEL 1100 NETWORK to another packet switching network via an X75 gateway link." ::= { adnIfAssocEntry 5 } adnPsxAcxEquipStatusChange TRAP-TYPE ENTERPRISE { adnTrapsPsxAcx } VARIABLES { adnNodeTime, adnTrapCategory, adnEquipType, adnEquipSubType, adnEquipIndex, adnEquipX731Admin, adnEquipX731Oper, adnEquipX731Usage, adnEquipX731Avail } DESCRIPTION "The indicated equipment has changed state. This trap is sent only if adnEquipTrapEnableMask has the bit set for the changed state or status." ::= 1 adnPsxVppStatusChange TRAP-TYPE ENTERPRISE { adnTrapsPsxAcx } VARIABLES { adnNodeTime, adnTrapCategory, adnPsxNmcAlarmCode, adnEquipIndex, adnNodeName } DESCRIPTION "The VPP of the indicated PSX has changed state. This trap is sent to the NMS for being forwarded in proprietary ASCII format to RATP management system" ::= 2 adnPsxNmcAlarmCode OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object is the code of the alarm received from the NMC. Common name: alarm code" ::= { adnTrapVars 37 } adnPsxCouplerStatusChange TRAP-TYPE ENTERPRISE { adnTrapsPsxAcx } VARIABLES { adnNodeTime, adnTrapCategory, adnPsxNmcAlarmCode, adnEquipIndex, adnNodeName, adnPsxFtdIndex, adnPsxFrontEndNumber, adnPsxCouplerIndex, adnPsxCouplerNumber } DESCRIPTION "The indicated coupler has changed state. This trap is sent to the NMS for being forwarded in proprietary ASCII format to RATP management system." ::= 3 adnPsxFtdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnEquipIndex of the FTD card. Common name: Equip Index" ::= { adnTrapVars 38 } adnPsxFrontEndNumber OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object corresponds to the Front end number in the alarm data. Common name: PSX Front End Number" ::= { adnTrapVars 39 } adnPsxCouplerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object corresponds to the adnEquipIndex of the coupler. Common name: Equip Index" ::= { adnTrapVars 40 } adnPsxCouplerNumber OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of this object corresponds to the Coupler number in the alarm data. Common name: PSX Coupler Number" ::= { adnTrapVars 41 } adnAtmAccTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmCharEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table constitutes the ATM charging ticket. None of the objects in this table can be obtained via a GET command. These objects are visible only in a charging ticket. Most of these objects duplicate objects in other tables. They are concatenated here to allow the charging ticket to be sent as a single INMP/PFXI table to conserve space." ::= { adnAtmMIB 2 } adnAtmAccEntry OBJECT-TYPE SYNTAX AdnAtmCharEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "One instance of the ATM charging ticket." INDEX { ifIndex } ::= { adnAtmAccTable 1 } AdnAtmCharEntry ::= SEQUENCE { adnAtmAccEquipType INTEGER, adnAtmAccTicketVersion INTEGER, adnAtmAccLocalNodeId INTEGER, adnAtmAccLocalChassis INTEGER, adnAtmAccLocalSlot INTEGER, adnAtmAccLocalLine INTEGER, adnAtmAccRemoteNodeId INTEGER, adnAtmAccRemoteChassis INTEGER, adnAtmAccRemoteSlot INTEGER, adnAtmAccRemoteLine INTEGER, adnAtmAccCallTerm INTEGER, adnAtmAccInterfaceType INTEGER, adnAtmAccConnectionType INTEGER, adnAtmAccConnectionTopology INTEGER, adnAtmAccSourceDest INTEGER, adnAtmAccCallingPartyNumPlan INTEGER, adnAtmAccCallingPartyLength INTEGER, adnAtmAccCallingPartyNumber OCTET STRING, adnAtmAccCalledPartyNumPlan INTEGER, adnAtmAccCalledPartyLength INTEGER, adnAtmAccCalledPartyNumber OCTET STRING, adnAtmAccLocalVpi INTEGER, adnAtmAccLocalVci INTEGER, adnAtmAccRemVpi INTEGER, adnAtmAccRemVci INTEGER, adnAtmAccConnUniqueID INTEGER, adnAtmAccConnStartTime INTEGER, adnAtmAccConnDuration INTEGER (-2147483648..2147483647), adnAtmAccReqTransitDelay INTEGER, adnAtmAccCumulTransitDelay INTEGER, adnAtmAccTransferCapability INTEGER, adnAtmAccTrmTrafficDescrType INTEGER, adnAtmAccTrmParam1 INTEGER, adnAtmAccTrmParam2 INTEGER, adnAtmAccTrmParam3 INTEGER, adnAtmAccTrmParam4 INTEGER, adnAtmAccTrmTagging INTEGER, adnAtmAccTrmPacketDiscard INTEGER, adnAtmAccRcvTrafficDescrType INTEGER, adnAtmAccRcvParam1 INTEGER, adnAtmAccRcvParam2 INTEGER, adnAtmAccRcvParam3 INTEGER, adnAtmAccRcvParam4 INTEGER, adnAtmAccRcvTagging INTEGER, adnAtmAccRcvPacketDiscard INTEGER, adnAtmAccClearingCause INTEGER, adnAtmAccClearingDiag INTEGER (-2147483648..2147483647), adnAtmAccVcDescriptor OCTET STRING } adnAtmAccEquipType OBJECT-TYPE SYNTAX INTEGER { other(1), hss700(2), hss1000(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the type of the equipment which generates this charging ticket. hss700 : Alcatel 1100 HSS Series 400/700, hss1000 : Alcatel 1100 HSS Series 1000. Common Name : Equipment Type." ::= { adnAtmAccEntry 1 } adnAtmAccTicketVersion OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the identifier of the version (format) of this ATM charging ticket. This object is numbered per type of equipment listed in adnAtmAccEquipType. adnAtmAccTicketVersion = 1 is the first value for Alcatel 1100 HSS Series 400/700. Common Name : Charging Ticket Version." ::= { adnAtmAccEntry 2 } adnAtmAccLocalNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the identifier of the node which generates this charging ticket. For HSS, the format of the ADN Node Routing ID is used : Bits 31-23 (9 bits) reserved for future use Bits 22-16 ( 7 bits) area identifier Bits 15-0 (16 bits) machine identifier Common Name : Local Node Identifier." ::= { adnAtmAccEntry 3 } adnAtmAccLocalChassis OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the chassis number where the interface is located. Common Name : Local Chassis" ::= { adnAtmAccEntry 4 } adnAtmAccLocalSlot OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the slot number of the interface in the chassis. Common Name : Local Slot" ::= { adnAtmAccEntry 5 } adnAtmAccLocalLine OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the line number in the slot. Common Name : Local Line" ::= { adnAtmAccEntry 6 } adnAtmAccRemoteNodeId OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the identifier of the node which supports the connection at the remote side. For HSS, the format of the ADN Node Routing ID is used : Bits 31-23 (9 bits) reserved for future use Bits 22-16 ( 7 bits) area identifier Bits 15-0 (16 bits) machine identifier Common Name : Remote Node Identifier." ::= { adnAtmAccEntry 7 } adnAtmAccRemoteChassis OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the chassis number where the remote interface is located. Common Name : Remote Chassis." ::= { adnAtmAccEntry 8 } adnAtmAccRemoteSlot OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the slot number of the interface in the remote chassis. Common Name : Remote Slot" ::= { adnAtmAccEntry 9 } adnAtmAccRemoteLine OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the line number in the remote slot. Common Name : Remote Line" ::= { adnAtmAccEntry 10 } adnAtmAccCallTerm OBJECT-TYPE SYNTAX INTEGER { other(1), terminated(2), intermediate(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object indicates a terminated ticket or an intermediate charging ticket : - terminated : PVC has been de-configured or disrupted SVC has been cleared (user or network cause) - intermediate : periodic collection of PVCs and long SVCs operator initiated collection of PVCs and SVCs. Intermediate tickets are for future use. Common Name : Call Terminated / not Terminated." ::= { adnAtmAccEntry 11 } adnAtmAccInterfaceType OBJECT-TYPE SYNTAX INTEGER { externalUni(1), nni(2), internalUniSig(3), virtualUni(4), physicalCni(5), routlogicalCni(6), nonroutlogicalCni(7), nonroutlogicalCniendtoend(8), internalUni(9) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Type of the ATM interface on which generates this charging ticket. Common Name : ATM Interface Type." ::= { adnAtmAccEntry 12 } adnAtmAccConnectionType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), internalVc(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the connection type : PVC versus SVC. Only the following values can be provided in a HSS charging ticket : - pvc, - svc. Common Name : Connection Type." ::= { adnAtmAccEntry 13 } adnAtmAccConnectionTopology OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), pointToMultipointRoot(3), pointToMultipointLeaf(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object describes the characteristics of the connection at the location where this charging ticket is generated : Only the following values can be provided in a HSS charging ticket : - pointTopoint. Common Name : Connection Topology." ::= { adnAtmAccEntry 14 } adnAtmAccSourceDest OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2), transit(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object indicates the location of the node which generates this charging ticket : - source : the node receives the SET-UP message from the calling user. - destination : the node transmits the SET-UP message to the called user. - transit : this value is reserved for the 1000 HSS Series 1000 system (this system may generate charging ticket on trunks for observation purposes). Common Name : Source or Destination." ::= { adnAtmAccEntry 15 } adnAtmAccCallingPartyNumPlan OBJECT-TYPE SYNTAX INTEGER { private(1), nsapE164(2), nativeE164(3), other(4), notSignificant(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the type of numbering plan of the calling party number. Common Name : Numbering Plan, Num Plan." ::= { adnAtmAccEntry 16 } adnAtmAccCallingPartyLength OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the number of significant digits in object adnAtmAccCallingParty. Common Name : Length of Calling Party Number." ::= { adnAtmAccEntry 17 } adnAtmAccCallingPartyNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the value of the calling party number (fixed length of 40 digits). Common Name : Calling Party Number." ::= { adnAtmAccEntry 18 } adnAtmAccCalledPartyNumPlan OBJECT-TYPE SYNTAX INTEGER { private(1), nsapE164(2), nativeE164(3), other(4), notSignificant(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the type of numbering plan of the called party number. Common Name : Numbering Plan, Num Plan." ::= { adnAtmAccEntry 19 } adnAtmAccCalledPartyLength OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the number of significant digits in object adnAtmAccCalledParty. Common Name : Length of Called Party Number." ::= { adnAtmAccEntry 20 } adnAtmAccCalledPartyNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the value of the called party number (fixed length of 40 digits). Common Name : Called Party Number." ::= { adnAtmAccEntry 21 } adnAtmAccLocalVpi OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) value on the local ATM interface. Common Name : Virtual Path Identifier (VPI)." ::= { adnAtmAccEntry 22 } adnAtmAccLocalVci OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) value on the local ATM interface. Common Name : Virtual Channel Identifier (VCI)." ::= { adnAtmAccEntry 23 } adnAtmAccRemVpi OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) value at the remote ATM interface. Common Name : Remote Virtual Path Identifier (VPI)." ::= { adnAtmAccEntry 24 } adnAtmAccRemVci OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) value at the remote ATM interface. Common Name : Remote Virtual Channel Identifier (VCI)." ::= { adnAtmAccEntry 25 } adnAtmAccConnUniqueID OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "This object serves to uniquely identify the two charging tickets that are generated at both ends of an ATM connection. The ConnUniqueID is a value which is local to the calling ATM interface, it is incremented by the calling ATM interface. The ConnUniqueID is significant for : - each point to point connection, - each leaf of a point to point connection. Common name : Connection Unique Identifier" ::= { adnAtmAccEntry 26 } adnAtmAccConnStartTime OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "In the first ticket generated : - this indicates the time of the CONNECT message when the establishment phase has been successful, - this indicates the time of the SET-UP message when the establishment phase has been unsuccessful, In the following intermediate tickets : - this indicates the time of the start of the interval. This is the coordinated universal time : number of seconds elapsed since 1970/01/01. Common name : Start Time." ::= { adnAtmAccEntry 27 } adnAtmAccConnDuration OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS tenths of a second ACCESS not-accessible STATUS mandatory DESCRIPTION "This object represents the duration (tenths of a second) while the connection has been in the transfer phase. The total duration of a connection is to be accumulated over all the intermediate tickets that are generated for that connection. Common name : Duration of the Ticket." ::= { adnAtmAccEntry 28 } adnAtmAccReqTransitDelay OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "This is the value of the transit delay required by the user for that connection. Common name : Required Transit Delay." ::= { adnAtmAccEntry 29 } adnAtmAccCumulTransitDelay OBJECT-TYPE SYNTAX INTEGER -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "This is the value of the transit delay provided by the network for that connection. Common name : Cumulative Transit Delay." ::= { adnAtmAccEntry 30 } adnAtmAccTransferCapability OBJECT-TYPE SYNTAX INTEGER { ubr(1), cbrRtAggregate(2), vbrNrtAggregate(3), cbrNrtAggregate(4), vbrRtAggregate(5), cbrRtClpZero(6), vbrRtClpZero(7), vbrNrtClpZero(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The ATM Transfer Capabilities (ATC) offered on a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)): - Constant Bit Rate (CBR) ATC: CBR Real Time (RT), CBR Non Real Time (NRT) - Variable Bit Rate (VBR) ATC: VBR RT, VBR NRT - Unspecified Bit Rate (UBR) ATC. Common Name: ATM Transfer Capability (ATC)." ::= { adnAtmAccEntry 31 } adnAtmAccTrmTrafficDescrType OBJECT-TYPE SYNTAX INTEGER { pcrCdv(1), pcrCdvScrMbs(2), pcrCdvPcr0(3), pcrCdvScr0Mbs0(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)) traffic descriptor in the transmit direction. Depending on the value, the following traffic parameters (defined in the same direction) are initialized: - 'pcrCdv': .PcrAggregate PARAM1 .CdvTol PARAM2 - 'pcrCdvScrMbs': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrAggregate PARAM3 .MbsAggregate PARAM4 - 'pcrCdvPcr0': .PcrAggregate PARAM1 .CdvTol PARAM2 .PcrClpZero PARAM3 - 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrClpZero PARAM3 .MbsClpZero PARAM4 Common name : Traffic Descriptor in the Transmit Direction." ::= { adnAtmAccEntry 32 } adnAtmAccTrmParam1 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "PARAM1 : always equal to the Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: PARAM1, Transmit Peak Cell Rate (PCR) Aggregate, Transmit PCR Aggregate" ::= { adnAtmAccEntry 33 } adnAtmAccTrmParam2 OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "PARAM2 : always equal to the Cell Delay Variation (CDV) tolerance of the traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: PARAM2, Transmit Cell Delay Variation (CDV) Tolerance, Transmit CDV Tolerance" ::= { adnAtmAccEntry 34 } adnAtmAccTrmParam3 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccTrmParam3 represents one of the following values : a) The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Aggregate, Transmit SCR Aggregate. b) The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Transmit PCR CLP 0. c) The Sustainable Cell Rate (SCR) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Transmit SCR CLP 0. Common Name : PARAM3." ::= { adnAtmAccEntry 35 } adnAtmAccTrmParam4 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccTrmParam4 represents one of the following values : a) The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Aggregate, Transmit MBS Aggregate. b) The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, of this Virtual Channel Link (VCL). Common Names: Transmit Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Transmit MBS CLP 0 Common Name : PARAM4." ::= { adnAtmAccEntry 36 } adnAtmAccTrmTagging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the transmit direction, when cells are not conformant, of this Virtual Channel Link (VCL). Common Name : Cell Tagging Option." ::= { adnAtmAccEntry 37 } adnAtmAccTrmPacketDiscard OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the transmit direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. Common Name : Tail Packet Discard." ::= { adnAtmAccEntry 38 } adnAtmAccRcvTrafficDescrType OBJECT-TYPE SYNTAX INTEGER { pcrCdv(1), pcrCdvScrMbs(2), pcrCdvPcr0(3), pcrCdvScr0Mbs0(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of a virtual cross-connection (Virtual Path Connection (VPC) and Virtual Channel Connection (VCC)) traffic descriptor in the receive direction. Depending on the value, the following traffic parameters (defined in the same direction) are initialized: - 'pcrCdv': .PcrAggregate PARAM1 .CdvTol PARAM2 - 'pcrCdvScrMbs': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrAggregate PARAM3 .MbsAggregate PARAM4 - 'pcrCdvPcr0': .PcrAggregate PARAM1 .CdvTol PARAM2 .PcrClpZero PARAM3 - 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1 .CdvTol PARAM2 .ScrClpZero PARAM3 .MbsClpZero PARAM4 Common name : Traffic Descriptor in the Receiving Direction." ::= { adnAtmAccEntry 39 } adnAtmAccRcvParam1 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "PARAM1 : always equal to the Peak Cell Rate (PCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction (switch point of view), of this Virtual Channel Link (VCL). Common Names: PARAM1, Receive Peak Cell Rate (PCR) Aggregate, Receive PCR Aggregate" ::= { adnAtmAccEntry 40 } adnAtmAccRcvParam2 OBJECT-TYPE SYNTAX INTEGER -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "PARAM2 : always equal to the Cell Delay Variation (CDV) tolerance of the traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: PARAM2, Receive Cell Delay Variation (CDV) Tolerance, Receive CDV Tolerance" ::= { adnAtmAccEntry 41 } adnAtmAccRcvParam3 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccRcvParam3 represents one of the following values : a) The Sustainable Cell Rate (SCR) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receivinG direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Aggregate, Receive SCR Aggregate. b) The Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Peak Cell Rate (PCR) Cell Loss Priority (CLP) 0, Receive PCR CLP 0. c) The Sustainable Cell Rate (SCR) for the Cell Loss PrioritY (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss Priority (CLP) 0, Receive SCR CLP 0. Common Name : PARAM3." ::= { adnAtmAccEntry 42 } adnAtmAccRcvParam4 OBJECT-TYPE SYNTAX INTEGER -- UNITS cells ACCESS read-only STATUS mandatory DESCRIPTION "Depending on the value of object 'adnAtmAccTrmTrafficDescrType' this object adnAtmAccRcvParam4 represents one of the following values : a) The Maximum Burst Size (MBS) for the aggregate traffic (Cell Loss Priority (CLP) 0+1), in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Aggregate, Receive MBS Aggregate. b) The Maximum Burst Size (MBS) for the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, of this Virtual Channel Link (VCL). Common Names: Receive Maximum Burst Size (MBS) Cell Loss Priority (CLP) 0, Receive MBS CLP 0. Common Name : PARAM4." ::= { adnAtmAccEntry 43 } adnAtmAccRcvTagging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether tagging option is enabled on the Cell Loss Priority (CLP) 0 traffic, in the receiving direction, when cells are not conformant, of this Virtual Channel Link (VCL). Common Name : Cell Tagging Option." ::= { adnAtmAccEntry 44 } adnAtmAccRcvPacketDiscard OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether packet discard option is enabled, in the receiving direction, of this Virtual Channel Link (VCL). When this option is enabled all the low priority cells in the remaining of an ATM Adaptation Layer (AAL) 5 frame are discarded, as soon as one of the cell of the frame has been discarded. Common Name : Tail Packet Discard." ::= { adnAtmAccEntry 45 } adnAtmAccClearingCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ATM forum cause value in the cause information element. This object is significant when the adnAtmAccCallTerm is equal to 'terminated'. Common Name : Clearing Cause." ::= { adnAtmAccEntry 46 } adnAtmAccClearingDiag OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "First 4 bytes of the ATM forum diagnostic value in the cause information element. This object is significant when the adnAtmAccCallTerm is equal to 'terminated'. Common Name : Diagnostic Cause." ::= { adnAtmAccEntry 47 } adnAtmAccVcDescriptor OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This value is a configurable 64 byte identifier for each ATM and FR Permanent Virtual Circuit (PVC). When it is not configured, the accounting and statistical records do not include this object." ::= { adnAtmAccEntry 48 } adnNmsVpnTrapVars OBJECT IDENTIFIER ::= { adnNmsVpn 1 } adnPVCConnectLowIfName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifName of the low endpoint interface for this PVC segment. The term low implies that this PVC segment end-point has the numerically lower ifIndex value than the connected/associated PVC segment end-point." ::= { adnNmsVpnTrapVars 1 } adnPVCConnectHighIfName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The ifName of the high endpoint interface for this PVC segment. The term high implies that this PVC segment end-point has the numerically higher ifIndex value than the connected/associated PVC segment end-point." ::= { adnNmsVpnTrapVars 2 } adnIpfwdsMIB OBJECT IDENTIFIER ::= { adnProprietary 24 } adnIpIfStackTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIpIfStackEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table containing information on the relationship between an IP interface and its correponding AAL5 connections (or indices). Each of these multiplexed entities correspond to a conceptual row in the ifTable." ::= { adnIpfwdsMIB 1 } adnIpIfStackEntry OBJECT-TYPE SYNTAX AdnIpIfStackEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information on a particular relationship between IP interface and its corresponding AAL5 connections. Each of the multiplexed ifIndex has a conceptual row in the ifTable." INDEX { adnIpIfStackHigherLayer, adnIpIfStackLowerLayer } ::= { adnIpIfStackTable 1 } AdnIpIfStackEntry ::= SEQUENCE { adnIpIfStackHigherLayer INTEGER (-2147483648..2147483647), adnIpIfStackLowerLayer INTEGER (-2147483648..2147483647), adnIpIfStackStatus RowStatus } adnIpIfStackHigherLayer OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of ifIndex corresponding to the IP interface which runs on 'top of' an AAL5 connection identified by a corresponding instance of adnIpIfStackLowerLayer." ::= { adnIpIfStackEntry 1 } adnIpIfStackLowerLayer OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "The value of ifIndex corresponding to an AAL5 connection which runs 'below' the IP interface identified by the correponding instance of adnIpIfStackHigherLayer." ::= { adnIpIfStackEntry 2 } adnIpIfStackStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the relationship between two sub- layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down a connection. " ::= { adnIpIfStackEntry 3 } adnUCNodeErrorsAtmces OBJECT IDENTIFIER ::= { adnUCNodeErrors 26 } adnUCNodeErrorsAtmcesIncTranId OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 1 } adnUCNodeErrorsAtmcesIncTranType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 2 } adnUCNodeErrorsAtmcesOtherTran OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 3 } adnUCNodeErrorsAtmcesDelReason OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 4 } adnUCNodeErrorsAtmcesNotUpdPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 12 } adnUCNodeErrorsAtmcesIncParVal OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 13 } adnUCNodeErrorsAtmcesMissingPar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 14 } adnUCNodeErrorsAtmcesNotLinePar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 100 } adnUCNodeErrorsAtmcesBadTsNb OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 101 } adnUCNodeErrorsAtmcesLineNotCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 102 } adnUCNodeErrorsAtmcesBadLineType OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 103 } adnUCNodeErrorsAtmcesAlrUnstr OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 104 } adnUCNodeErrorsAtmcesBundleNtCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 106 } adnUCNodeErrorsAtmcesOtherLine OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 107 } adnUCNodeErrorsAtmcesBundleNtFnd OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 108 } adnUCNodeErrorsAtmcesNtBundlePar OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 110 } adnUCNodeErrorsAtmcesBundleEmpty OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 111 } adnUCNodeErrorsAtmcesBadChassis OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 112 } adnUCNodeErrorsAtmcesBadSlot OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 113 } adnUCNodeErrorsAtmcesBadLine OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 114 } adnUCNodeErrorsAtmcesBadChannel OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 115 } adnUCNodeErrorsAtmcesBundleNtDel OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 116 } adnUCNodeErrorsAtmcesBundleNtEmp OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 117 } adnUCNodeErrorsAtmcesCnxNotDel OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 118 } adnUCNodeErrorsAtmcesNoLineCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 121 } adnUCNodeErrorsAtmcesAlrStruct OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 122 } adnUCNodeErrorsAtmcesNoBundleCre OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 123 } adnUCNodeErrorsAtmcesOtherAtmCnx OBJECT IDENTIFIER ::= { adnUCNodeErrorsAtmces 124 } adnCvsiMIB OBJECT IDENTIFIER ::= { adnProprietary 22 } AdnCvsiCos ::= INTEGER { cos0(1), cos7(2), other(3) } adnCvsiSwitchInfoGroup OBJECT IDENTIFIER ::= { adnCvsiMIB 1 } adnCvsiTscChnlState OBJECT-TYPE SYNTAX INTEGER { down(0), up(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry represents the status of the Tag Switch Controller (TSC) channel. This channel connects the HSS with the Tag Switch Controller (TSC). Common Name: TSC Channel State" ::= { adnCvsiSwitchInfoGroup 1 } adnCvsiActiveSesId OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the active session ID of the CVSI slave in the HSS. This value changes whenever the slave is restarted, powered up, switched over to or manually reset. The session IDs are used by the Tag Switch Controller (TSC) to detect the loss of synchronization. Common Name: Active Session ID" ::= { adnCvsiSwitchInfoGroup 2 } adnCvsiPwrUpSesId OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the power-up session ID of the CVSI slave in the HSS. This value reflects the session ID which was assigned when this slave was powered up. This value may be used by the Tag Switch Controller (TSC) for detecting a more serious synchronization loss. Common Name: PowerUp Session ID" ::= { adnCvsiSwitchInfoGroup 3 } adnCvsiSlaveId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slave ID corresponding to this instance of CVSI slave in HSS. This value is relevant if we have multiple slaves for each Tag Switch Controller (TSC). Common Name: Salve ID" ::= { adnCvsiSwitchInfoGroup 4 } adnCvsiSwitchId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The switch ID for the HSS in this Tag Switching Router (TSR). Common Name: Switch ID" ::= { adnCvsiSwitchInfoGroup 5 } adnCvsiControllerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The controller ID for the Tag Switch Controller (TSC) in this Tag Switching Router (TSR). Common Name: Controller ID" ::= { adnCvsiSwitchInfoGroup 6 } adnCvsiVersionId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The version of the CVSI code running in this Tag Switching Router (TSR). Common Name: Version ID" ::= { adnCvsiSwitchInfoGroup 7 } adnCvsiMaxTrapWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of traps which can be pending in the CVSI slave in the HSS. The traps will be pending if either the Tag Switch controller (TSC) hasn't acknowledged them, or they could not be sent for some reason. Common Name: Max Trap Window" ::= { adnCvsiSwitchInfoGroup 8 } adnCvsiCurrTrapWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of pending traps in the CVSI slave in the HSS. The traps will be pending if either the Tag Switch Controller (TSC) hasn't acknowledged them, or they could not be sent for some reason. Common Name: Current Trap Window" ::= { adnCvsiSwitchInfoGroup 9 } adnCvsiMaxCmdWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of commands which can be pending in the CVSI slave in the HSS. A command will be pending if it has not been processed by the CVSI slave. This value is conveyed to the Tag Switch controller. Common Name: Max Cmd Window" ::= { adnCvsiSwitchInfoGroup 10 } adnCvsiCurrCmdWindow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of pending commands in the CVSI slave in the HSS. A command will be pending if it has not been processed by the CVSI slave. Common Name: Current Cmd Window" ::= { adnCvsiSwitchInfoGroup 11 } adnCvsiSpacingState OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether traffic spacing is performed at all TDP interfaces. Spacing is used to reduce the peak to peak Cell Delay Variation (CDV) or to smoooth out bursty traffic coming into the network or to perform rate reduction. Common Name: Spacing State" DEFVAL { enabled } ::= { adnCvsiSwitchInfoGroup 12 } adnCvsiSpacingRate OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-write STATUS mandatory DESCRIPTION "The rate at which traffic will be spaced if adnCvsiSpacingState is enabled. This rate is specified in cells per second. Common Name: Spacing Rate" DEFVAL { ''H } ::= { adnCvsiSwitchInfoGroup 13 } adnCvsiTscIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the TSC interface for this switch. Common Name: TSC ifIndex " ::= { adnCvsiSwitchInfoGroup 14 } adnTdpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnTdpIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the TDP Interface. This table contains proprietary TDP interface configuration parameters. There is one entry per TDP interface. A TDP interface is a logical inter-node ATM interface or an ATM interface Connected to the Tag Switch Controller (TSC)." ::= { adnCvsiMIB 2 } adnTdpIfEntry OBJECT-TYPE SYNTAX AdnTdpIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the TDP interface table. There is one entry per TDP interface." INDEX { ifIndex } ::= { adnTdpIfTable 1 } AdnTdpIfEntry ::= SEQUENCE { adnTdpIfLogicalNum INTEGER (-2147483648..2147483647), adnTdpIfPhyDesc OCTET STRING, adnTdpIfType INTEGER, adnTdpIfState INTEGER, adnTdpIfTrapSent INTEGER, adnTdpIfPhyIfIndex InterfaceIndex, adnTdpIfPhyVpi INTEGER (-2147483648..2147483647), adnTdpIfIuniIfIndex InterfaceIndex, adnTdpIfVciMax INTEGER (-2147483648..2147483647), adnTdpIfVciMin INTEGER (-2147483648..2147483647), adnTdpIfMaxTDPConn INTEGER (-2147483648..2147483647), adnTdpIfAvailConnEgress INTEGER (-2147483648..2147483647), adnTdpIfAvailConnIn INTEGER (-2147483648..2147483647), adnTdpIfMaxCellRateEgress INTEGER (-2147483648..2147483647), adnTdpIfMaxCellRateIn INTEGER (-2147483648..2147483647), adnTdpIfAvailCellRateEgress INTEGER (-2147483648..2147483647), adnTdpIfAvailCellRateIn INTEGER (-2147483648..2147483647), adnTdpIfMaxCtdEgress INTEGER (-2147483648..2147483647), adnTdpIfMaxCtdIn INTEGER (-2147483648..2147483647), adnTdpIfMaxCdvEgress INTEGER (-2147483648..2147483647), adnTdpIfMaxCdvIn INTEGER (-2147483648..2147483647), adnTdpIfRemoteLogicalNum INTEGER (-2147483648..2147483647), adnTdpIfRemoteNodeId AdnRoutingID, adnTdpIfPolicingState AdnEnableDisabled, adnTdpIfPCR INTEGER (-2147483648..2147483647), adnTdpIfABW INTEGER (-2147483648..2147483647), adnTdpIfRemNodeMacNum INTEGER (-2147483648..2147483647), adnTdpIfRemNodeAreaNum INTEGER (-2147483648..2147483647) } adnTdpIfLogicalNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This is the logical interface number of this TDP interface used by the Tag Switch Controller (TSC). Common Name: Logical If Number" ::= { adnTdpIfEntry 1 } adnTdpIfPhyDesc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The description of the interface. It is the 20 byte physical descriptor of the interface provided to the Tag Switch Controller (TSC). Common Name: Interface Physical Desc" ::= { adnTdpIfEntry 2 } adnTdpIfType OBJECT-TYPE SYNTAX INTEGER { tsc(1), tdpAccess(2), tdpTrunk(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the type of the interface The following are the possible values it can hold: 1 - Tag switch controller (TSC) interface, it connects the HSS to the Tag Switch Controller (TSC). 2 - Tag distribution protocol (TDP) access interface, it connects HSS to the Tag Edge Router (TER). 3 - Tag distribution protocol (TDP) trunk interace, it is the trunk interface for the tagged data. Common Name: Interface Type" ::= { adnTdpIfEntry 3 } adnTdpIfState OBJECT-TYPE SYNTAX INTEGER { pending(1), congested(2), opened(3), up(4), down(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the state of the interface The following are the possible values it can hold: 1 - Interface Pending, the interface is being set up 2 - Interface Congested, the interface is congested 3 - Interface Opened, the interface is up 4 - Interface Up 5 - Interface Down Common Name: Interface State" ::= { adnTdpIfEntry 4 } adnTdpIfTrapSent OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object tells whether a trap has been sent to the Tag Switch controller The following are the possible values it can hold. A trap has to be sent when an interface is brought up or down, This object tells whether a trap has been sent after this event. The interface status transition will be based on the the TDP interface status (adnTdpIfState). Common Name: Trap Sent" ::= { adnTdpIfEntry 5 } adnTdpIfPhyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the physical line supporting this TDP interface. Common Name: Physical IfIndex" ::= { adnTdpIfEntry 6 } adnTdpIfPhyVpi OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) associated with the physical line supporting this TDP interface. Common Name: Physical VPI" ::= { adnTdpIfEntry 7 } adnTdpIfIuniIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the internal UNI (I-UNI) on the Cell Interconnection Gateway (CIG) associated with this TDP interface. An internal UNI is used for the CVSI connection between the Tag Switch Controller (TSC) and HSS. It is zero if this is not a TSC interface (i.e if adnTdpIfType is not equal to 'tsc'). Common Name: IUNI IfIndex" ::= { adnTdpIfEntry 8 } adnTdpIfVciMax OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum VCI value allowed on this interface. Common Name: Max VCI" ::= { adnTdpIfEntry 9 } adnTdpIfVciMin OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum VCI value allowed on this interface. Common Name: Min VCI" ::= { adnTdpIfEntry 10 } adnTdpIfMaxTDPConn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Tag Distribution protocol (TDP) connections allowed on this interface. Common Name: Max Connections" ::= { adnTdpIfEntry 11 } adnTdpIfAvailConnEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of available Tag Distribution Protocol (TDP) egress connections. The egress direction means the direction of outwards traffic flow from the interface. Common Name: Available Egress Connections" ::= { adnTdpIfEntry 12 } adnTdpIfAvailConnIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The number of available Tag Distribution Protocol (TDP) ingress connections. The ingress direction means the direction of inwards traffic flow into the interface. Common Name: Available Ingress Connections" ::= { adnTdpIfEntry 13 } adnTdpIfMaxCellRateEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The maximum egress cell rate available. The cell rate is measured in Cells/Second. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress Cell Rate" ::= { adnTdpIfEntry 14 } adnTdpIfMaxCellRateIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The maximum ingress cell rate available. The cell rate is measured in Cells/Second. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress Cell Rate" ::= { adnTdpIfEntry 15 } adnTdpIfAvailCellRateEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The available egress cell rate. The cell rate is measured in Cells/Second. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Available Egress Cell Rate" ::= { adnTdpIfEntry 16 } adnTdpIfAvailCellRateIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The available ingress cell rate. The cell rate is measured in Cells/Second. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Available Ingress Cell Rate" ::= { adnTdpIfEntry 17 } adnTdpIfMaxCtdEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Transfer Delay (CTD) for egress. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress CTD" ::= { adnTdpIfEntry 18 } adnTdpIfMaxCtdIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Transfer Delay (CTD) for ingress. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress CTD" ::= { adnTdpIfEntry 19 } adnTdpIfMaxCdvEgress OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Delay Variation (CDV) for egress. This value is configured when an interface is created. The egress direction means the direction of outwards traffic flow from the interface. A value of -1 indicates that the field is not used. Common Name: Max Egress CDV" ::= { adnTdpIfEntry 20 } adnTdpIfMaxCdvIn OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Delay Variation (CDV) for ingress. This value is configured when an interface is created. The ingress direction means the direction of inwards traffic flow into the interface. A value of -1 indicates that the field is not used. Common Name: Max Ingress CDV" ::= { adnTdpIfEntry 21 } adnTdpIfRemoteLogicalNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This entry represents the logical interface number of the remote side of the TDP trunk. This is the logical interface number of remote TDP interface used by the Tag Switch Controller (TSC). Common Name: Remote Logical Interface Number" ::= { adnTdpIfEntry 22 } adnTdpIfRemoteNodeId OBJECT-TYPE SYNTAX AdnRoutingID ACCESS read-only STATUS mandatory DESCRIPTION "This entry represents the node ID of the remote side HSS node of the TDP trunk. Common Name: Remote Node ID" ::= { adnTdpIfEntry 23 } adnTdpIfPolicingState OBJECT-TYPE SYNTAX AdnEnableDisabled ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether traffic policing is performed on this TDP interface. When policing is disabled then no traffic spacing will be done at the TDP interface no matter what the value of adnCvsiSpacingState is. Common Name: Policing" DEFVAL { enabled } ::= { adnTdpIfEntry 24 } adnTdpIfPCR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Peak Cell Rate (PCR) allowed for traffic through this interface. This rate is specified in cells per second. Common Name: PCR" ::= { adnTdpIfEntry 25 } adnTdpIfABW OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth, measured in cells per second, allocated to this TDP interface. Common Name: Allocated Bandwidth" ::= { adnTdpIfEntry 26 } adnTdpIfRemNodeMacNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The machine number part of adnTdpIfRemoteNodeId." ::= { adnTdpIfEntry 27 } adnTdpIfRemNodeAreaNum OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The area number part of adnTdpIfRemoteNodeId." ::= { adnTdpIfEntry 28 } adnTdpIfLookupTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnTdpIfLookupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is a lookup table where a CVSI logical interface number is mapped to the corresponding ATM logical interface ifIndex. The ATM logical interface ifIndex is the index of the adnTdpIfTable." ::= { adnCvsiMIB 3 } adnTdpIfLookupEntry OBJECT-TYPE SYNTAX AdnTdpIfLookupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the TDP Interface lookup Table. There is one entry per TDP interface." INDEX { adnTdpIfLogicalNum } ::= { adnTdpIfLookupTable 1 } AdnTdpIfLookupEntry ::= SEQUENCE { adnTdpIfIndex InterfaceIndex } adnTdpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ATM logical interface ifIndex corresponding to the given logical interface number. This ifIndex is the index of the adnTdpIfTable. Common Name: IfIndex" ::= { adnTdpIfLookupEntry 1 } adnAtmTdpConnTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnAtmTdpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the TDP connections in the HSS. There is one entry per TDP connection in the HSS." ::= { adnCvsiMIB 4 } adnAtmTdpConnEntry OBJECT-TYPE SYNTAX AdnAtmTdpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the CVSI HSS Connection Table. There is one entry per TDP connection in the HSS." INDEX { ifIndex, adnAtmTdpConnVpi, adnAtmTdpConnVci, adnAtmTdpConnCconnectIndex } ::= { adnAtmTdpConnTable 1 } AdnAtmTdpConnEntry ::= SEQUENCE { adnAtmTdpConnVpi INTEGER, adnAtmTdpConnVci INTEGER, adnAtmTdpConnCconnectIndex INTEGER, adnAtmTdpConnPriSec INTEGER, adnAtmTdpConnOutIfIndex InterfaceIndex, adnAtmTdpConnOutVpi INTEGER, adnAtmTdpConnOutVci INTEGER, adnAtmTdpConnOutCconnectIndex INTEGER, adnAtmTdpConnState INTEGER, adnAtmTdpConnForwCellRate INTEGER (-2147483648..2147483647), adnAtmTdpConnForwPCR INTEGER (-2147483648..2147483647), adnAtmTdpConnForwDelay INTEGER (-2147483648..2147483647), adnAtmTdpConnForwDelayVariation INTEGER (-2147483648..2147483647), adnAtmTdpConnRevCellRate INTEGER (-2147483648..2147483647), adnAtmTdpConnRevPCR INTEGER (-2147483648..2147483647), adnAtmTdpConnRevDelay INTEGER (-2147483648..2147483647), adnAtmTdpConnRevDelayVariation INTEGER (-2147483648..2147483647), adnAtmTdpConnPriPersEPFlag INTEGER, adnAtmTdpConnSecPersEPFlag INTEGER, adnAtmTdpConnForwSCR INTEGER (-2147483648..2147483647), adnAtmTdpConnForwMBS INTEGER (-2147483648..2147483647), adnAtmTdpConnRevSCR INTEGER (-2147483648..2147483647), adnAtmTdpConnRevMBS INTEGER (-2147483648..2147483647), adnAtmTdpConnForwServType INTEGER, adnAtmTdpConnRevServType INTEGER } adnAtmTdpConnVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VPI of the ATM cross connection for this TDP connection. This is also an index of the table. Common Name: VPI" ::= { adnAtmTdpConnEntry 1 } adnAtmTdpConnVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VCI of the ATM cross connection for this TDP connection. This is also an index of the table. Common Name: VCI" ::= { adnAtmTdpConnEntry 2 } adnAtmTdpConnCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the cross-connection for the Virtual Channel Connection (VCC) on this interface. In a point-to-point cross-connection, the index equals zero. In a point-to- -multipoint cross-connection, there is a different index for each leaf. Common Name: Cross Connect Index" ::= { adnAtmTdpConnEntry 3 } adnAtmTdpConnPriSec OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object tells whether this end of the TDP connection index is Primary or Secondary. Common Name: Pri/Sec" ::= { adnAtmTdpConnEntry 4 } adnAtmTdpConnOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of this node's output ATM logical interface. Common Name: Out IfIndex" ::= { adnAtmTdpConnEntry 5 } adnAtmTdpConnOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) of this connection on the output ATM interface from this node. In conjunction with adnAtmTdpConnOutIfIndex, this VPI can be used for path tracing. Common Name: Out VPI" ::= { adnAtmTdpConnEntry 6 } adnAtmTdpConnOutVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Connection Identifier (VCI) of this connection on the output ATM interface from this node. In conjunction with adnAtmTdpConnOutIfIndex, this VCI can be used for path tracing. Common Name: Out VCI" ::= { adnAtmTdpConnEntry 7 } adnAtmTdpConnOutCconnectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the cross-connection for the Virtual Channel Connection (VCC) on the output ATM interface from this node. In a point-to-point cross-connection, the index equals zero. In a point-to-multipoint cross-connection, there is a different index for each leaf. Common Name: Out Cross Connect Index" ::= { adnAtmTdpConnEntry 8 } adnAtmTdpConnState OBJECT-TYPE SYNTAX INTEGER { reserved(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the state of the connection The following are the possible values it can hold. 1 - Connection Reserved- Created but not activated 2 - Connection Active - Active state Common Name: Conn State" ::= { adnAtmTdpConnEntry 9 } adnAtmTdpConnForwCellRate OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The forward requested cell rate for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward Cell Rate" ::= { adnAtmTdpConnEntry 10 } adnAtmTdpConnForwPCR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The forward peak cell rate (PCR) for the connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward PCR" ::= { adnAtmTdpConnEntry 11 } adnAtmTdpConnForwDelay OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum forward delay allowed for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward Delay" ::= { adnAtmTdpConnEntry 12 } adnAtmTdpConnForwDelayVariation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Delay Variation (CDV) in the forward direction allowed for this connection. This value is configured when the connection is created. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward CDV" ::= { adnAtmTdpConnEntry 13 } adnAtmTdpConnRevCellRate OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The reverse requested cell rate for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse Cell Rate" ::= { adnAtmTdpConnEntry 14 } adnAtmTdpConnRevPCR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The reverse peak cell rate (PCR) for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse PCR" ::= { adnAtmTdpConnEntry 15 } adnAtmTdpConnRevDelay OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS milliseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum reverse delay allowed for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse Delay" ::= { adnAtmTdpConnEntry 16 } adnAtmTdpConnRevDelayVariation OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS microseconds ACCESS read-only STATUS mandatory DESCRIPTION "The maximum Cell Delay Variation (CDV) in the reverse direction allowed for this connection. This value is configured when the connection is created. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse CDV" ::= { adnAtmTdpConnEntry 17 } adnAtmTdpConnPriPersEPFlag OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the primary Persistent End point flag. This flag indicates that this part of connection is the first leg of a tag distribution protocol (TDP) connection. The first leg of the connection terminates at a tag edge router (TER). Common Name: Primary Endpoint Flag" ::= { adnAtmTdpConnEntry 18 } adnAtmTdpConnSecPersEPFlag OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the secondary Persistent End point flag. This flag indicates that this part of connection is last leg of a tag distribution protocol (TDP) connection. The last leg of the connection terminates into a tag edge router (TER). Common Name: Secondry Endpoint Flag" ::= { adnAtmTdpConnEntry 19 } adnAtmTdpConnForwSCR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The forward sustainable cell rate (SCR) for this connection. Forward direction is the direction traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward SCR" ::= { adnAtmTdpConnEntry 20 } adnAtmTdpConnForwMBS OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The forward maximum burst size (MBS) for this connection. Forward direction is the direction of traffic from the primary to the secondary interface. A value of -1 indicates that the field is not used. Common Name: Forward MBS" ::= { adnAtmTdpConnEntry 21 } adnAtmTdpConnRevSCR OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells/sec ACCESS read-only STATUS mandatory DESCRIPTION "The Reverse sustainable cell rate (SCR) for this connection. Reverse direction is the direction traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse SCR" ::= { adnAtmTdpConnEntry 22 } adnAtmTdpConnRevMBS OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The reverse maximum burst size (MBS) for this connection. Reverse direction is the direction of traffic from the secondary to the primary interface. A value of -1 indicates that the field is not used. Common Name: Reverse MBS" ::= { adnAtmTdpConnEntry 23 } adnAtmTdpConnForwServType OBJECT-TYPE SYNTAX AdnCvsiCos ACCESS read-only STATUS mandatory DESCRIPTION "The forward service type for a connection. It is a value which specifies what class of service has been requested for this connection in forward direction. Forward direction is the direction traffic from the primary to the secondary interface. Common Name: Forward Service Type" ::= { adnAtmTdpConnEntry 24 } adnAtmTdpConnRevServType OBJECT-TYPE SYNTAX AdnCvsiCos ACCESS read-only STATUS mandatory DESCRIPTION "The reverse service type for a connection. It is a value which specifies what class of service has been requested for this connection in reverse direction. Reverse direction is the direction of traffic from the secondary to the primary interface. Common Name: Reverse Service Type" ::= { adnAtmTdpConnEntry 25 } adnIprtMIB OBJECT IDENTIFIER ::= { adnProprietary 23 } adnIpRouteNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdnIpRouteNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the IP Routing Configuration Table" ::= { adnIprtMIB 1 } adnIpRouteNodeEntry OBJECT-TYPE SYNTAX AdnIpRouteNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP Route Node Entry defines IP Routing Node Table Entries." INDEX { adnIpRouteConfigIndex } ::= { adnIpRouteNodeTable 1 } AdnIpRouteNodeEntry ::= SEQUENCE { adnIpRouteConfigIndex INTEGER (-2147483648..2147483647), adnIpRouteConfigFilePtr DisplayString, adnIpRouteConfigAdminState INTEGER (-2147483648..2147483647), adnIpRouteConfigOperState INTEGER (-2147483648..2147483647) } adnIpRouteConfigIndex OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the Index into this table. This index will represent only one instance of any object in this table." ::= { adnIpRouteNodeEntry 1 } adnIpRouteConfigFilePtr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object defines the pointer to an ASCII string that points to the IP routing Configuration path/file on the HSS CU disk." ::= { adnIpRouteNodeEntry 2 } adnIpRouteConfigAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the desired state of the IP Routing (GateD) component. There are typically only two selection states, Enabled(1) or Disabled(2)." ::= { adnIpRouteNodeEntry 3 } adnIpRouteConfigOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the current state of the IP Routing (GateD) component. There are typically only two states possible, Up(1) or Down(2)." ::= { adnIpRouteNodeEntry 4 } END