Telematics-Nevada-MIB DEFINITIONS ::= BEGIN -- -- MIB for Nevada software release 4.x -- -- Last Updated: March 02,2000 -- IMPORTS enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; telematics OBJECT IDENTIFIER ::= {enterprises 230} tmxNevada OBJECT IDENTIFIER ::= {telematics 5} nevadaSystem OBJECT IDENTIFIER ::= {tmxNevada 1} nevadaModels OBJECT IDENTIFIER ::= {tmxNevada 2} nevadaFrameRelay OBJECT IDENTIFIER ::= {tmxNevada 5} nevadaIti OBJECT IDENTIFIER ::= {tmxNevada 6} nevadaSync OBJECT IDENTIFIER ::= {tmxNevada 7} nevadaX25 OBJECT IDENTIFIER ::= {tmxNevada 10} nevadaIsdn OBJECT IDENTIFIER ::= {tmxNevada 11} nevadaPpp OBJECT IDENTIFIER ::= {tmxNevada 12} nevadaElx OBJECT IDENTIFIER ::= {tmxNevada 15} nevadaIp OBJECT IDENTIFIER ::= {tmxNevada 16} nevadaTcp OBJECT IDENTIFIER ::= {tmxNevada 17} nevadaFtp OBJECT IDENTIFIER ::= {tmxNevada 18} nevadaTelnet OBJECT IDENTIFIER ::= {tmxNevada 20} nevadaRadius OBJECT IDENTIFIER ::= {tmxNevada 40} nevadaSnmp OBJECT IDENTIFIER ::= {tmxNevada 45} nevadaApacs OBJECT IDENTIFIER ::= {tmxNevada 50} nevadaR2 OBJECT IDENTIFIER ::= {tmxNevada 55} nevadaRb OBJECT IDENTIFIER ::= {tmxNevada 58} nevadaTraps OBJECT IDENTIFIER ::= {tmxNevada 64} nevadaAdmin OBJECT IDENTIFIER ::= {tmxNevada 65} nevadaPos OBJECT IDENTIFIER ::= {tmxNevada 66} nevadaL2tp OBJECT IDENTIFIER ::= {tmxNevada 70} -- -- Nevada Types -- NvPortName ::= DisplayString (SIZE(0..10)) NvPoolName ::= DisplayString (SIZE(0..10)) NvNetAddress ::= DisplayString (SIZE(0..16)) NvVisaType ::= INTEGER { undef(1), -- (+1) fxd1(2), -- fxd2(3), -- fxd3(4), -- fxd4(5), -- fxd5(6), -- fxd6(7), -- fxd7(8), -- fxd8(9), -- fxd9(10), -- fxd10(11), -- fxd11(12), -- fxd12(13), -- fxd13(14), -- fxd14(15), -- fxd15(16), -- fxd16(17), -- fxd17(18), -- fxd18(19), -- fxd19(20), -- fxd20(21), -- fxd21(22), -- fxd22(23), -- fxd23(24), -- fxd24(25), -- fxd25(26), -- fxd26(27), -- fxd27(28), -- fxd28(29), -- fxd29(30), -- fxd30(31), -- fxd31(32), -- fxd32(33), -- varfs(102) -- } NvIsoType ::= INTEGER { unused(1), -- (+1) fxb1(2), -- fxb2(3), -- fxb3(4), -- fxb4(5), -- fxb5(6), -- fxb6(7), -- fxb7(8), -- fxb8(9), -- fxb9(10), -- fxb10(11), -- fxb11(12), -- fxb12(13), -- fxb13(14), -- fxb14(15), -- fxb15(16), -- fxb16(17), -- fxb17(18), -- fxb18(19), -- fxb19(20), -- fxb20(21), -- fxb21(22), -- fxb22(23), -- fxb23(24), -- fxb24(25), -- fxb25(26), -- fxb26(27), -- fxb27(28), -- fxb28(29), -- fxb29(30), -- fxb30(31), -- fxb31(32), -- fxb32(33), -- fxb33(34), -- fxb34(35), -- fxb35(36), -- fxb36(37), -- fxb37(38), -- fxb38(39), -- fxb39(40), -- fxb40(41), -- fxb41(42), -- fxb42(43), -- fxn1(102), -- fxn2(103), -- fxn3(104), -- fxn4(105), -- fxn5(106), -- fxn6(107), -- fxn7(108), -- fxn8(109), -- fxn9(110), -- fxn10(111), -- fxn11(112), -- fxn12(113), -- fxn13(114), -- fxn14(115), -- fxn15(116), -- fxn16(117), -- fxn17(118), -- fxn18(119), -- fxn19(120), -- fxn20(121), -- fxn21(122), -- fxn22(123), -- fxn23(124), -- fxn24(125), -- fxn25(126), -- fxn26(127), -- fxn27(128), -- fxn28(129), -- fxn29(130), -- fxn30(131), -- fxn31(132), -- fxn32(133), -- fxn33(134), -- fxn34(135), -- fxn35(136), -- fxn36(137), -- fxn37(138), -- fxn38(139), -- fxn39(140), -- fxn40(141), -- fxn41(142), -- fxn42(143), -- llbyte(202), -- lllbyte(204), -- llnibble(222), -- lllnibble(224) -- } -- -- nodestat file -- nvNodestat OBJECT IDENTIFIER ::= {nevadaSystem 1} nvNodestatTotalbufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of buffers in system - these buffers are freed at startup time to be allocated as needed. Statistic is zeroed at startup time." ::= {nvNodestat 1 } nvNodestatCurminbufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "minimum number of buffers available in last 15 minute cycle Statistic is zeroed at startup time." ::= {nvNodestat 2 } nvNodestatCurmincpu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "cpu availablity -minimum percentage of CPU available in last 15 minute cycle. Statistic is zeroed at startup time." ::= {nvNodestat 3 } nvNodestatCurtime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "current time number of minutes into current time - is set to 0 at start of current cycle - is incremented every minute - when incremented to 15 then cycle is over and curminbuf and curmincpu are calculated and curtime is set back to 0 Statistic is zeroed at startup time." ::= {nvNodestat 4 } nvNodestatFreebufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of available buffers at last check - check is done every 3 seconds Statistic is zeroed at startup time." ::= {nvNodestat 6 } nvNodestatFreecpu OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "percentage of CPU available at last check - check is done every 3 seconds Statistic is zeroed at startup time." ::= {nvNodestat 7 } nvNodestatMaxcpu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "maximum CPU availablity maximum count of idle CPU cycles per 16 milliseconds - percentages of CPU availability are calculated relative to this number (freecpu,curmincpu,mincpu) Statistic is zeroed at startup time." ::= {nvNodestat 8 } nvNodestatMinbufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "minimum number of buffers minimum number of available buffers ever recorded Statistic is zeroed at startup time." ::= {nvNodestat 10 } nvNodestatMincpu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "cpu availablity minimum percentage of CPU available ever recorded Statistic is zeroed at startup time." ::= {nvNodestat 11 } nvNodestatRxavgpps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "average rx packets per second average packets per second received during last 15 minute cycle Statistic is zeroed at startup time." ::= {nvNodestat 12 } nvNodestatRxcurpps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current rx packets per second packets per second received during last 3 second cycle Statistic is zeroed at startup time" ::= {nvNodestat 13 } nvNodestatTxavgpps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "average tx packets per second average packets per second transmitted during last 15 minute cycle Statistic is zeroed at startup time." ::= {nvNodestat 14 } nvNodestatTxcurpps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current tx packets per second packets per second transmitted during last 3 second cycle Statistic is zeroed at startup time." ::= {nvNodestat 15 } nvNodestatX25call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Actual number of lcns allocated." ::= {nvNodestat 16} nvNodestatChgreqid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Change Request ID Confirmation management change request ID." ::= {nvNodestat 17} nvNodestatCurclk OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current clock source." ::= {nvNodestat 18} nvNodestatClkfails OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times clock failure has been detected." ::= {nvNodestat 19} nvNodestatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvNodestat 20 } nvNodestatNumcalls OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of succesful modem calls received by ITI." ::= {nvNodestat 21} --AF -- -- nodeconf -- nvNodeconf OBJECT IDENTIFIER ::= { nevadaSystem 2} nvNodeconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNodeconf 1} nvNodeconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNodeconf 2} nvNodeconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNodeconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nodeconf file." ::= { nvNodeconf 3 } nvNodeconfEntry OBJECT-TYPE SYNTAX NvNodeconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nodeconf record." INDEX { nvNodeconfIndex } ::= { nvNodeconfTable 1 } NvNodeconfEntry ::= SEQUENCE { nvNodeconfIndex INTEGER, nvNodeconfPartnum DisplayString, nvNodeconfDbversion DisplayString, nvNodeconfSwdate DisplayString, nvNodeconfSwversion DisplayString, nvNodeconfCalarms INTEGER, nvNodeconfStartup INTEGER, nvNodeconfSwtype INTEGER, nvNodeconfX25call INTEGER, nvNodeconfAcctrec INTEGER, nvNodeconfAlarmrec INTEGER, nvNodeconfBusyout INTEGER, nvNodeconfRate1 INTEGER, nvNodeconfRate2 INTEGER, nvNodeconfRate3 INTEGER, nvNodeconfRate4 INTEGER, nvNodeconfNodeid INTEGER, nvNodeconfExstat INTEGER, nvNodeconfRsttimer INTEGER, nvNodeconfChgreqid INTEGER, nvNodeconfClksrc1 DisplayString, nvNodeconfClksrc2 DisplayString, nvNodeconfClksrc3 DisplayString, nvNodeconfDsprfail INTEGER, nvNodeconfFrmrfail INTEGER, nvNodeconfQdlifail INTEGER } nvNodeconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nodeconf record" ::= { nvNodeconfEntry 1 } nvNodeconfPartnum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Part Number -partnum- This is the part number of the software Format: AAAAAA-BBB-C-DDEEFF AAAAAA = Concatenated product code ie. a 4 link,8 channel switching PAD which has the code 2604-8 becomes 260408 BBB = Customer/feature code C = Medium DD = Major version number. A new set of documentation is generated for each major version EE = Database version number FF = Software version number Parameter is set during factory configuration." ::= { nvNodeconfEntry 2 } nvNodeconfDbversion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Database Version (dbversion) Major and minor database release numbers Eg 0300 Similar usage as for software revision number Parameter is set during factory configuration." ::= { nvNodeconfEntry 3 } nvNodeconfSwdate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "Software Creation Date (swdate) Parameter is set during factory configuration." ::= { nvNodeconfEntry 7 } nvNodeconfSwversion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Software Version (swversion) Major and minor software release numbers Eg. 0601 Parameter is set during factory configuration." ::= { nvNodeconfEntry 8 } nvNodeconfCalarms OBJECT-TYPE SYNTAX INTEGER (0..500) ACCESS read-write STATUS mandatory DESCRIPTION "Max Custom Alarm Records (calarms) This field indicates the total num of custom alarm entries per box. DO NOT USE HUB-RESERVE3 OR TAKE ANY SPACE AWAY FROM IT TO USE FOR A NEW FIELD. IT IS THE SECRET HIDING PLACE WHERE THE HARDWARE CONFIGURATION IS STORED FOR USE IN DETECTING HARDWARE CHANGES WHEN REBOOTING. Default value is 0." ::= { nvNodeconfEntry 10 } nvNodeconfStartup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SD Script to automatically start after aprox. 10 seconds system boot" ::= { nvNodeconfEntry 11 } nvNodeconfSwtype OBJECT-TYPE SYNTAX INTEGER { sview(1), -- smartnet (+1) inf(2), -- acp inf2(3) -- acp with sview billing records } ACCESS read-write STATUS mandatory DESCRIPTION "INF or SmartView Type (swtype) sview for old std billing Default value is sview (0+1)." ::= { nvNodeconfEntry 12 } nvNodeconfX25call OBJECT-TYPE SYNTAX INTEGER (1..25000) ACCESS read-write STATUS mandatory DESCRIPTION "X.25 Call (nvX25call) This field indicates the total num of lcn per box Default value is 257." ::= { nvNodeconfEntry 14 } nvNodeconfAcctrec OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Max Accounting Records (acctrec) This indicates the maximum number of accounting records that will be held in memory. When this number is reached, additional records will be discarded. Default value is 100." ::= { nvNodeconfEntry 16 } nvNodeconfAlarmrec OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Max Alarm Records (alarmrec) This indicates the maximum number of alarm records buffered Default value is 50." ::= { nvNodeconfEntry 17 } nvNodeconfBusyout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "used to busy out ITI ports when X25 links go down " ::= { nvNodeconfEntry 21 } nvNodeconfRate1 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Rate For Time Zone 1 (rate1) " ::= { nvNodeconfEntry 22 } nvNodeconfRate2 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Rate For Time Zone 2 (rate2) " ::= { nvNodeconfEntry 23 } nvNodeconfRate3 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Rate For Time Zone 3 (rate3) " ::= { nvNodeconfEntry 24 } nvNodeconfRate4 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Rate For Time Zone 4 (rate4) " ::= { nvNodeconfEntry 25 } nvNodeconfNodeid OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Node Identifier (nodeid) This field is used by the Network Bus component to identify this node within a private network,and must be unique within that domain. Default value is 1000." ::= { nvNodeconfEntry 27 } nvNodeconfExstat OBJECT-TYPE SYNTAX INTEGER { disable(1), -- no enhx25stat (+1) link(2), -- level 2 only x25(3) -- level 2 and 3 } ACCESS read-write STATUS mandatory DESCRIPTION "enhanced x25 stat (exstat) " ::= { nvNodeconfEntry 28 } nvNodeconfRsttimer OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Restart timer for OMS Default value is 0." ::= { nvNodeconfEntry 29 } nvNodeconfChgreqid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Change Request Id " ::= { nvNodeconfEntry 30 } nvNodeconfClksrc1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Primary clock source to synchronize TDM connects. " ::= { nvNodeconfEntry 31 } nvNodeconfClksrc2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Primary clock source to synchronize TDM connects. " ::= { nvNodeconfEntry 32 } nvNodeconfClksrc3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Primary clock source to synchronize TDM connects. " ::= { nvNodeconfEntry 33 } nvNodeconfDsprfail OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "dspr failure threshold " ::= { nvNodeconfEntry 34 } nvNodeconfFrmrfail OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "frmr failure threshold " ::= { nvNodeconfEntry 35 } nvNodeconfQdlifail OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Qdli failure threshold " ::= { nvNodeconfEntry 36 } -- -- acctstat file -- nvAcctstat OBJECT IDENTIFIER ::= {nevadaSystem 3} nvAcctstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records in file." ::= {nvAcctstat 1} nvAcctstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvAcctstat 2} nvAcctstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvAcctstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "acctstat file." ::= {nvAcctstat 3} nvAcctstatEntry OBJECT-TYPE SYNTAX NvAcctstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "acctstat record, indexed by record number" INDEX {nvAcctstatRecord} ::= {nvAcctstatTable 1 } NvAcctstatEntry ::= SEQUENCE { nvAcctstatComponent DisplayString, nvAcctstatCallid INTEGER, nvAcctstatRecord INTEGER, nvAcctstatCalled DisplayString, nvAcctstatCalling DisplayString, nvAcctstatRecorg INTEGER, nvAcctstatSegsize INTEGER, nvAcctstatInfofunc INTEGER, nvAcctstatDay INTEGER, nvAcctstatMinute INTEGER, nvAcctstatSecond INTEGER, nvAcctstatTxpaks Counter, nvAcctstat64ktxpaks Counter, nvAcctstatRxpaks Counter, nvAcctstat64krxpaks Counter, nvAcctstatTxchars Counter, nvAcctstat64ktxchars Counter, nvAcctstatRxchars Counter, nvAcctstat64krxchars Counter, nvAcctstatTxsegs Counter, nvAcctstat64ktxsegs Counter, nvAcctstatRxsegs Counter, nvAcctstat64krxsegs Counter, nvAcctstatAbstime INTEGER, nvAcctstatDtreset DisplayString } nvAcctstatComponent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION " name of component This is the name of component accumulating the statistics." ::= {nvAcctstatEntry 1 } nvAcctstatRecord OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "record ID This is the internal number of the accounting record." ::= {nvAcctstatEntry 2} nvAcctstatCalled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Called address (from bcd)" ::= {nvAcctstatEntry 3 } nvAcctstatCalling OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling address (from bcd)." ::= {nvAcctstatEntry 4 } nvAcctstatRecorg OBJECT-TYPE SYNTAX INTEGER { iti(1), -- (+1) x25(2) } ACCESS read-only STATUS mandatory DESCRIPTION " call origin: 1=iti/lserv 2=x25 ." ::= {nvAcctstatEntry 5 } nvAcctstatSegsize OBJECT-TYPE SYNTAX INTEGER (1..32767) ACCESS read-only STATUS mandatory DESCRIPTION "segment size This is the segment size of this port that generates accounting. Statistic is zeroed at startup time." ::= {nvAcctstatEntry 6 } nvAcctstatDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " date of call establishment (internal) Statistic is zeroed at startup time." ::= {nvAcctstatEntry 7 } nvAcctstatMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " time of call establishment Statistic is zeroed at startup time." ::= {nvAcctstatEntry 8 } nvAcctstatSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "time of call establishment Statistic is zeroed at startup time." ::= {nvAcctstatEntry 9 } nvAcctstatTxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number transmitted packets Statistic is zeroed at startup time." ::= {nvAcctstatEntry 10 } nvAcctstat64ktxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1000 transmitted packets Statistic is zeroed at startup time." ::= {nvAcctstatEntry 11 } nvAcctstatRxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number received packets Statistic is zeroed at startup time." ::= {nvAcctstatEntry 12 } nvAcctstat64krxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1000 received packets Statistic is zeroed at startup time." ::= {nvAcctstatEntry 13 } nvAcctstatTxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number transmitted characters Statistic is zeroed at startup time." ::= {nvAcctstatEntry 14 } nvAcctstat64ktxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1000 transmitted characters Statistic is zeroed at startup time." ::= {nvAcctstatEntry 15 } nvAcctstatRxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number received characters Statistic is zeroed at startup time." ::= {nvAcctstatEntry 16 } nvAcctstat64krxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1000 received characters Statistic is zeroed at startup time." ::= {nvAcctstatEntry 17 } nvAcctstatTxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number transmitted segments Statistic is zeroed at startup time." ::= {nvAcctstatEntry 18 } nvAcctstat64ktxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1000 transmitted segments Statistic is zeroed at startup time." ::= {nvAcctstatEntry 19 } nvAcctstatRxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " number received segments Statistic is zeroed at startup time." ::= {nvAcctstatEntry 20 } nvAcctstat64krxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " 1000 received segments Statistic is zeroed at startup time." ::= {nvAcctstatEntry 21 } nvAcctstatAbstime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "starting absolute time Statistic is zeroed at startup time." ::= {nvAcctstatEntry 22 } nvAcctstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvAcctstatEntry 23 } nvAcctstatCallid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Ptr to internal structure that starts accounting" ::= {nvAcctstatEntry 24 } nvAcctstatInfofunc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Information function ptr provided by accounting entity" ::= {nvAcctstatEntry 25 } -- -- FILE ACCTOPER -- nvAcctoper OBJECT IDENTIFIER ::= { nevadaSystem 4} nvAcctoperMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvAcctoper 1} nvAcctoperNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvAcctoper 2} nvAcctoperTable OBJECT-TYPE SYNTAX SEQUENCE OF NvAcctoperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "acctoper file." ::= { nvAcctoper 3 } nvAcctoperEntry OBJECT-TYPE SYNTAX NvAcctoperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "acctoper record." INDEX { nvAcctoperIndex } ::= { nvAcctoperTable 1 } NvAcctoperEntry ::= SEQUENCE { nvAcctoperIndex INTEGER, nvAcctoperComponent DisplayString, nvAcctoperEnable INTEGER, nvAcctoperSegsize INTEGER } nvAcctoperIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of acctoper record" ::= { nvAcctoperEntry 1 } nvAcctoperComponent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "service component This is the name of the component that uses the accounting service. An example of this is NET1,ITI,etc. Parameter is set during factory configuration." ::= { nvAcctoperEntry 2 } nvAcctoperEnable OBJECT-TYPE SYNTAX INTEGER { false(1), -- disable (+1) true(2) -- enable (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable This field is used to enable the accounting function. Default value is true (1+1)." ::= { nvAcctoperEntry 3 } nvAcctoperSegsize OBJECT-TYPE SYNTAX INTEGER (1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "segment size This field defines the size of a segment. A segment is usually a portion of a packet (ie. 64 bytes) as is more representative in actual accounting of resource utilization. The possible values range from one to the largest possible packet size. Default value is 64." ::= { nvAcctoperEntry 4 } -- -- modemstat file -- nvModemstat OBJECT IDENTIFIER ::= {nevadaSystem 5} nvModemstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvModemstat 1} nvModemstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvModemstat 2} nvModemstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvModemstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemstat file." ::= {nvModemstat 3} nvModemstatEntry OBJECT-TYPE SYNTAX NvModemstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemstat record." INDEX {nvModemstatIndex} ::= {nvModemstatTable 1 } NvModemstatEntry ::= SEQUENCE { nvModemstatIndex INTEGER, nvModemstatName DisplayString, nvModemstatState INTEGER, nvModemstatRate INTEGER, nvModemstatType INTEGER, nvModemstatEctype INTEGER, nvModemstatDctype INTEGER, nvModemstatMode INTEGER, nvModemstatRxparity INTEGER, nvModemstatTxparity INTEGER, nvModemstatAccms DisplayString, nvModemstatMse INTEGER, nvModemstatRcvlvl INTEGER, nvModemstatRetrain INTEGER, nvModemstatRenego INTEGER, nvModemstatSelftest INTEGER, nvModemstatFirmver DisplayString, nvModemstatModel DisplayString, nvModemstatRxpclear INTEGER, nvModemstatDsp DisplayString, nvModemstatDtreset DisplayString } nvModemstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Modemstat record" ::= {nvModemstatEntry 1} nvModemstatName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "digital modem status name." ::= {nvModemstatEntry 2 } nvModemstatState OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) hshake(2), ecdc(3), connected(4), retraining(5), renegotiating(6), clearDown(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state" ::= {nvModemstatEntry 3 } nvModemstatRate OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) t1200R75(2), t75R1200(3), v300(4), v600(5), v1200(6), v2400(7), v4800(8), v7200(9), v9600NT(10), v9600(11), v12000(12), v14400(13), v16800(14), v19200(15), v21600(16), v24000(17), v26400(18), v28800(19), v31200(20), v33600(21), v32000(22), v34000(23), v36000(24), v38000(25), v40000(26), v42000(27), v44000(28), v46000(29), v48000(30), v50000(31), v52000(32), v54000(33), v56000(34), v58000(35), v60000(36), vv28000(37), v29333(38), v30667(39), vv32000(40), v33333(41), v34667(42), vv36000(43), v37333(44), v38667(45), vv40000(46), v41333(47), v42667(48), vv44000(49), v45333(50), v46667(51), vv48000(52), v49333(53), v50667(54), vv52000(55), v53333(56), v54667(57), vv56000(58), v57333(59), v58667(60), vv60000(61) } ACCESS read-only STATUS mandatory DESCRIPTION "modem rate in bps." ::= {nvModemstatEntry 4 } nvModemstatType OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) v34(2), v32bis(3), v32(4), v22bis(5), v22(6), v21(7), bell212(9), unknown(10), bell103(11), v23(12), v27(13), v29(14), v33(15), v17(16), v34bis(17), vpcm(18), v110(21) } ACCESS read-only STATUS mandatory DESCRIPTION "modem modulation scheme." ::= {nvModemstatEntry 5 } nvModemstatEctype OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) v42ErrorCorrection(2), mnpErrorCorrection(3) } ACCESS read-only STATUS mandatory DESCRIPTION "modem error correction status" ::= {nvModemstatEntry 6 } nvModemstatDctype OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) on(2), off(3) } ACCESS read-only STATUS mandatory DESCRIPTION " modem data compression status." ::= {nvModemstatEntry 7 } nvModemstatMode OBJECT-TYPE SYNTAX INTEGER { predetection(2), -- (+1) sync(3), async(4) } ACCESS read-only STATUS mandatory DESCRIPTION "synchronous or asynchronous." ::= {nvModemstatEntry 8 } nvModemstatRxparity OBJECT-TYPE SYNTAX INTEGER { even(2), -- (+1) odd(3), mark(4), space(5), none(6), clear(7) } ACCESS read-only STATUS mandatory DESCRIPTION "receive parity setting." ::= {nvModemstatEntry 9 } nvModemstatTxparity OBJECT-TYPE SYNTAX INTEGER { even(2), -- (+1) odd(3), mark(4), space(5), none(6), clear(7) } ACCESS read-only STATUS mandatory DESCRIPTION "transmit parity setting." ::= {nvModemstatEntry 10 } nvModemstatAccms OBJECT-TYPE SYNTAX DisplayString (SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "for async to sync PPP, shows asy char control maps." ::= {nvModemstatEntry 11 } nvModemstatMse OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "modem noise level (mean squared err)." ::= {nvModemstatEntry 12 } nvModemstatRcvlvl OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Modem receive level." ::= {nvModemstatEntry 13 } nvModemstatRetrain OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number retrains this call." ::= {nvModemstatEntry 14 } nvModemstatRenego OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number renegotiations this call." ::= {nvModemstatEntry 15 } nvModemstatSelftest OBJECT-TYPE SYNTAX INTEGER { passed(2), dspFailed(3), sramFailed(4), sramAndDspFailed(5) } ACCESS read-only STATUS mandatory DESCRIPTION "soft init selftest result." ::= {nvModemstatEntry 16 } nvModemstatFirmver OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Firmware version number" ::= {nvModemstatEntry 17 } nvModemstatModel OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "DSP microcode product code." ::= {nvModemstatEntry 18 } nvModemstatRxpclear OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Modem clear rx parity (rxpclear) bit." ::= { nvModemstatEntry 19 } nvModemstatDsp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "the name of the DSP allocated." ::= {nvModemstatEntry 20 } nvModemstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvModemstatEntry 21 } -- -- modemconf -- nvModemconf OBJECT IDENTIFIER ::= {nevadaSystem 6} nvModemconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvModemconf 1} nvModemconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvModemconf 2} nvModemconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvModemconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemconf file." ::= { nvModemconf 3 } nvModemconfEntry OBJECT-TYPE SYNTAX NvModemconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemconf record." INDEX { nvModemconfIndex } ::= { nvModemconfTable 1 } NvModemconfEntry ::= SEQUENCE { nvModemconfIndex INTEGER, nvModemconfName DisplayString, nvModemconfProfilename DisplayString, nvModemconfEnable INTEGER, nvModemconfStatus INTEGER } nvModemconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of modemconf record" ::= { nvModemconfEntry 1 } nvModemconfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Digital modem resource config name (name) Parameter is set during factory configuration." ::= { nvModemconfEntry 2 } nvModemconfProfilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Digital modemprof name that it is associated with" ::= { nvModemconfEntry 4 } nvModemconfEnable OBJECT-TYPE SYNTAX INTEGER { yes(2), -- (+1) no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Enabled or not." ::= { nvModemconfEntry 5 } nvModemconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvModemconfEntry 20 } -- This file is used to define names and passwords of individuals -- authorized to use the system management facilities. -- There is one record for each authorized user. -- add-action symuser-encode -- mod-action symuser-encode nvSymuser OBJECT IDENTIFIER ::= { nevadaSystem 7 } nvSymuserMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvSymuser 1} nvSymuserNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvSymuser 2} nvSymuserTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSymuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "symuser file." ::= { nvSymuser 3 } nvSymuserEntry OBJECT-TYPE SYNTAX NvSymuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "symuser record." INDEX { nvSymuserIndex } ::= { nvSymuserTable 1 } NvSymuserEntry ::= SEQUENCE { nvSymuserIndex INTEGER, nvSymuserUsername DisplayString, nvSymuserPassword DisplayString, nvSymuserStatus INTEGER } nvSymuserIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of symuser record" ::= { nvSymuserEntry 1 } nvSymuserUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "User Name (username) Name of user allowed to use system management functions. The System Manager Interface attempts to match the call user data field of an incoming call against the entries in this file. If no match is found, the call is cleared. " ::= { nvSymuserEntry 2 } nvSymuserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "User Password (password) User password. After a user name is matched,the user is asked to enter their assigned password. If it is not entered correctly,the call is cleared. " ::= { nvSymuserEntry 3 } nvSymuserStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvSymuserEntry 5 } nvNmsuser OBJECT IDENTIFIER ::= { nevadaSystem 8 } nvNmsuserMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNmsuser 1} nvNmsuserNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNmsuser 2} nvNmsuserTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNmsuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nmsuser file." ::= { nvNmsuser 3 } nvNmsuserEntry OBJECT-TYPE SYNTAX NvNmsuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nmsuser record." INDEX { nvNmsuserIndex } ::= { nvNmsuserTable 1 } NvNmsuserEntry ::= SEQUENCE { nvNmsuserIndex INTEGER, nvNmsuserCalladdr DisplayString, nvNmsuserCalldata DisplayString, nvNmsuserPassword DisplayString, nvNmsuserPsiz INTEGER, nvNmsuserWsiz INTEGER, nvNmsuserRpoacode INTEGER, nvNmsuserOchrg INTEGER, nvNmsuserCug INTEGER, nvNmsuserTput INTEGER, nvNmsuserNmsid DisplayString, nvNmsuserStatus INTEGER } nvNmsuserIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nmsuser record" ::= { nvNmsuserEntry 1 } nvNmsuserCalladdr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "NMS X.121 Address (calladdr) " ::= { nvNmsuserEntry 2 } nvNmsuserCalldata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-write STATUS mandatory DESCRIPTION "NMS Userdata (calldata) Default value is 0." ::= { nvNmsuserEntry 3 } nvNmsuserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "NMS Component Password (password) Default value is 0." ::= { nvNmsuserEntry 4 } nvNmsuserPsiz OBJECT-TYPE SYNTAX INTEGER { b16(5), -- (+1) b32(6), -- b64(7), -- b128(8), -- b256(9), -- b512(10), -- b1024(11) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Packet Size (psiz) Default value is 7+1." ::= { nvNmsuserEntry 5 } nvNmsuserWsiz OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "Window Size (wsiz) Default value is 2." ::= { nvNmsuserEntry 6 } nvNmsuserRpoacode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "RPOA Code (rpoacode) Default value is 0." ::= { nvNmsuserEntry 7 } nvNmsuserOchrg OBJECT-TYPE SYNTAX INTEGER { oall(2), -- (+1) onorm(3), -- orev(4) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Charging Restriction (ochrg) Default value is 1+1." ::= { nvNmsuserEntry 8 } nvNmsuserCug OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Closed User Group Id (cug) Default value is 0." ::= { nvNmsuserEntry 9 } nvNmsuserTput OBJECT-TYPE SYNTAX INTEGER { bps75(4), -- (+1) bps150(5), -- bps300(6), -- bps600(7), -- bps1200(8), -- bps2400(9), -- bps4800(10), -- bps9600(11) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Throughput Class (tput) Default value is 10+1." ::= { nvNmsuserEntry 10 } nvNmsuserNmsid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "NMS Identification (nmsid) " ::= { nvNmsuserEntry 11 } nvNmsuserStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvNmsuserEntry 12 } -- File contains information that is used by the network router -- to map network-addresses to destination node id's. -- -- This information identifies the location of an addressed -- network entity. -- -- The network address and user data stored in the NETMAP file -- are patterns that allow the following options: -- 1. xxxxxx - arbitrary alpha/numeric data (numeric for address) -- 2. *xxx - match exactly the last 3 characters,allow any -- number of preceeding characters (0 or more). -- 3. xxx* - match exactly the first three characters,any number of -- trailing ones (0 or more). -- 4. * - match anything. -- 5. xx%xx - match exactly the first two characters,an arbitrary -- third character,and exactly the last two characters. -- -- The best match is defined as the field with the most number of -- exact matches with the stored patterns. This means that * is the -- last to be matched (catch all). -- -- In mapping,the best match of the network address is taken first, -- and within this,the best match for user data. nvNetmap OBJECT IDENTIFIER ::= { nevadaSystem 9 } nvNetmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNetmap 1} nvNetmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNetmap 2} nvNetmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNetmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netmap file." ::= { nvNetmap 3 } nvNetmapEntry OBJECT-TYPE SYNTAX NvNetmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netmap record." INDEX { nvNetmapIndex } ::= { nvNetmapTable 1 } NvNetmapEntry ::= SEQUENCE { nvNetmapIndex INTEGER, nvNetmapNetaddr DisplayString, nvNetmapUserdata DisplayString, nvNetmapNodeid INTEGER, nvNetmapStatus INTEGER } nvNetmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of netmap record" ::= { nvNetmapEntry 1 } nvNetmapNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Network X.121 Address (netaddr) This field contains the network address pattern that is matched against the the network address field in a 'call request'. " ::= { nvNetmapEntry 2 } nvNetmapUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-write STATUS mandatory DESCRIPTION "User Data (userdata) This field contains the call user data pattern that is matched against the call user data field in a 'call request'. " ::= { nvNetmapEntry 3 } nvNetmapNodeid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Node Identifier (nodeid) This parameter is the identifier of the entity providing the service for a matched network address and user data. " ::= { nvNetmapEntry 4 } nvNetmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvNetmapEntry 5 } -- File used by the network router to decide how to get to a -- desired location. This location is obtained from the NETMAP file. nvNetroute OBJECT IDENTIFIER ::= { nevadaSystem 10 } nvNetrouteMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNetroute 1} nvNetrouteNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNetroute 2} nvNetrouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNetrouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netroute file." ::= { nvNetroute 3 } nvNetrouteEntry OBJECT-TYPE SYNTAX NvNetrouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netroute record." INDEX { nvNetrouteIndex } ::= { nvNetrouteTable 1 } NvNetrouteEntry ::= SEQUENCE { nvNetrouteIndex INTEGER, nvNetrouteNodeid INTEGER, nvNetrouteService DisplayString, nvNetroutePrio INTEGER, nvNetrouteStatus INTEGER } nvNetrouteIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of netroute record" ::= { nvNetrouteEntry 1 } nvNetrouteNodeid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Node Identifier (nodeid) This parameter is an identifier of destination node. This value was located in NETMAP. " ::= { nvNetrouteEntry 2 } nvNetrouteService OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Service Component (service) This parameter is an index into component table of component providing the service. " ::= { nvNetrouteEntry 3 } nvNetroutePrio OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Route Priority (prio) This parameter represents the user-assigned priority of the route. The router searches this file for the highest priority route that will allow more connections. If the highest priority route is unavailable,the next highest is tried until all possibilities are exhausted and the call is cleared. Default value is 100." ::= { nvNetrouteEntry 4 } nvNetrouteStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvNetrouteEntry 5 } -- This file describes all the PVCs in this network that "originate" -- or "terminate" -- within this node. PVCs are implemented within the network as -- switched virtual circuits from the "A" end to the "B" end. The -- "A" end is responsible for initiating the connection. nvNetpvc OBJECT IDENTIFIER ::= { nevadaSystem 11 } nvNetpvcMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNetpvc 1} nvNetpvcNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNetpvc 2} nvNetpvcTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNetpvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netpvc file." ::= { nvNetpvc 3 } nvNetpvcEntry OBJECT-TYPE SYNTAX NvNetpvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netpvc record." INDEX { nvNetpvcIndex } ::= { nvNetpvcTable 1 } NvNetpvcEntry ::= SEQUENCE { nvNetpvcIndex INTEGER, nvNetpvcService DisplayString, nvNetpvcPvcid INTEGER, nvNetpvcPvccode INTEGER, nvNetpvcPvcend INTEGER, nvNetpvcStatus INTEGER } nvNetpvcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of netpvc record" ::= { nvNetpvcEntry 1 } nvNetpvcService OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Service Component (service) COMPID and PVCID together uniquely identify one end of a PVC,and make up the key to this file when searching for an 'A' end. " ::= { nvNetpvcEntry 2 } nvNetpvcPvcid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Local PVC Identifier (pvcid) " ::= { nvNetpvcEntry 3 } nvNetpvcPvccode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Global PVC Identifier (pvccode) PVCCODE uniquely identifies a PVC,and is used as the key to this file when searching for a 'B' end. " ::= { nvNetpvcEntry 4 } nvNetpvcPvcend OBJECT-TYPE SYNTAX INTEGER { originatingEnd(2), -- originating end (+1) terminatingEnd(3), -- terminating end symmetricEnd(4) -- symmetric end } ACCESS read-write STATUS mandatory DESCRIPTION "PVC End (pvcend) Default value is 2+1." ::= { nvNetpvcEntry 5 } nvNetpvcStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvNetpvcEntry 6 } -- File contains information that is used by the network router -- to map PVC identifiers to destination node id's. -- -- This information identifies the location of an addressed -- network entity. nvNetpvcmap OBJECT IDENTIFIER ::= { nevadaSystem 12 } nvNetpvcmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNetpvcmap 1} nvNetpvcmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNetpvcmap 2} nvNetpvcmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNetpvcmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netpvcmap file." ::= { nvNetpvcmap 3 } nvNetpvcmapEntry OBJECT-TYPE SYNTAX NvNetpvcmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netpvcmap record." INDEX { nvNetpvcmapIndex } ::= { nvNetpvcmapTable 1 } NvNetpvcmapEntry ::= SEQUENCE { nvNetpvcmapIndex INTEGER, nvNetpvcmapPvccode INTEGER, nvNetpvcmapNodeid INTEGER, nvNetpvcmapStatus INTEGER } nvNetpvcmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of netpvcmap record" ::= { nvNetpvcmapEntry 1 } nvNetpvcmapPvccode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Global PVC Identifier (pvccode) " ::= { nvNetpvcmapEntry 2 } nvNetpvcmapNodeid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Node Identifier (nodeid) This parameter is the identifier of the entity providing 'B' end of a PVC within our network. " ::= { nvNetpvcmapEntry 3 } nvNetpvcmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvNetpvcmapEntry 10 } -- -- netcon -- nvNetcon OBJECT IDENTIFIER ::= {nevadaSystem 13} nvNetconMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNetcon 1} nvNetconNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNetcon 2} nvNetconTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNetconEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netcon file." ::= {nvNetcon 3} nvNetconEntry OBJECT-TYPE SYNTAX NvNetconEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "netcon record, indexed by record number" INDEX {nvNetconIndex} ::= {nvNetconTable 1 } NvNetconEntry ::= SEQUENCE { nvNetconIndex INTEGER, nvNetconSrccompid DisplayString, nvNetconDstcompid DisplayString, nvNetconCallingad DisplayString, nvNetconCalledad DisplayString, nvNetconConstate INTEGER, nvNetconConid DisplayString, nvNetconSrcid DisplayString, nvNetconDstid DisplayString } nvNetconIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of netcon record" ::= {nvNetconEntry 1} nvNetconSrccompid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "source component id Originating component of the connection. " ::= {nvNetconEntry 2 } nvNetconDstcompid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "destination component id Receiving component of the connection. " ::= {nvNetconEntry 3} nvNetconCallingad OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "calling network address (from bcd) The calling network address." ::= {nvNetconEntry 4 } nvNetconCalledad OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "called network address (from bcd) The called network address." ::= {nvNetconEntry 5 } nvNetconConstate OBJECT-TYPE SYNTAX INTEGER { initial(2), -- (+1) awaitingResponse(3), dataTransfer(5), disconnected(9) } ACCESS read-only STATUS mandatory DESCRIPTION "connection state The actual state of this connection. Initial status is 1." ::= {nvNetconEntry 6 } nvNetconConid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Internal Network connection identifier." ::= {nvNetconEntry 7 } nvNetconSrcid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Internal Source identifier." ::= {nvNetconEntry 8 } nvNetconDstid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Internal Destination identifier." ::= {nvNetconEntry 9 } -- -- routemap file -- nvRoutemap OBJECT IDENTIFIER ::= { nevadaSystem 14} nvRoutemapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRoutemap 1} nvRoutemapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRoutemap 2} nvRoutemapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRoutemapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "routemap file." ::= { nvRoutemap 3 } nvRoutemapEntry OBJECT-TYPE SYNTAX NvRoutemapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "routemap record." INDEX { nvRoutemapIndex } ::= { nvRoutemapTable 1 } NvRoutemapEntry ::= SEQUENCE { nvRoutemapIndex INTEGER, nvRoutemapAddrstr DisplayString, nvRoutemapAddrtype INTEGER, nvRoutemapNetaddr DisplayString, nvRoutemapUserdata DisplayString, nvRoutemapStatus INTEGER } nvRoutemapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of routemap record" ::= { nvRoutemapEntry 1 } nvRoutemapAddrstr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "Address string to be translated (addrstr)." ::= { nvRoutemapEntry 2 } nvRoutemapAddrtype OBJECT-TYPE SYNTAX INTEGER { callednum(2), -- (+1) calledsub(3), any(9) } ACCESS read-write STATUS mandatory DESCRIPTION "How to interpret addrstr (addrtype)." ::= { nvRoutemapEntry 3 } nvRoutemapNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Netaddr yielded by match with addrstr." ::= { nvRoutemapEntry 4 } nvRoutemapUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-write STATUS mandatory DESCRIPTION "Userdata yielded by match with addrstr." ::= { nvRoutemapEntry 5 } nvRoutemapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRoutemapEntry 6 } -- File contains one record used to uniquely identify a HUB, -- and to carry miscellaneous configuration information. -- -- mediastat file -- nvMediastat OBJECT IDENTIFIER ::= {nevadaSystem 15} nvMediastatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvMediastat 1} nvMediastatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvMediastat 2} nvMediastatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvMediastatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mediastat file." ::= { nvMediastat 3 } nvMediastatEntry OBJECT-TYPE SYNTAX NvMediastatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mediastat record." INDEX { nvMediastatIndex } ::= { nvMediastatTable 1 } NvMediastatEntry ::= SEQUENCE { nvMediastatIndex INTEGER, nvMediastatOrigimage INTEGER, nvMediastatImage INTEGER, nvMediastatDebug INTEGER, nvMediastatImagechg INTEGER, nvMediastatDump INTEGER, nvMediastatImage1db DisplayString, nvMediastatImage1sw DisplayString, nvMediastatImage2db DisplayString, nvMediastatImage2sw DisplayString, nvMediastatMediasize INTEGER } nvMediastatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of mediastat record" ::= { nvMediastatEntry 1 } nvMediastatOrigimage OBJECT-TYPE SYNTAX INTEGER { image1(1), -- (+1) image2(401) } ACCESS read-only STATUS mandatory DESCRIPTION "original boot image." ::= {nvMediastatEntry 2 } nvMediastatImage OBJECT-TYPE SYNTAX INTEGER { image1(1), -- (+1) image2(401) } ACCESS read-write STATUS mandatory DESCRIPTION "current boot image." ::= {nvMediastatEntry 3 } nvMediastatDebug OBJECT-TYPE SYNTAX INTEGER { disable(1), -- (+1) enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "debug flag." ::= {nvMediastatEntry 4 } nvMediastatImagechg OBJECT-TYPE SYNTAX INTEGER { disable(1), -- (+1) enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "auto image change." ::= {nvMediastatEntry 5 } nvMediastatDump OBJECT-TYPE SYNTAX INTEGER { disable(1), -- (+1) enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "dump flag." ::= {nvMediastatEntry 6 } nvMediastatImage1db OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "side0 database version." ::= {nvMediastatEntry 7 } nvMediastatImage1sw OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "side0 software version." ::= {nvMediastatEntry 8 } nvMediastatImage2db OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "side1 database version." ::= {nvMediastatEntry 9 } nvMediastatImage2sw OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "side1 software version." ::= {nvMediastatEntry 10 } nvMediastatMediasize OBJECT-TYPE SYNTAX INTEGER { absent(1), -- (+1) v2MB(3), v4MB(5), v6MB(7), v8MB(9), v10MB(11), v12MB(13), v14MB(15), v16MB(17), v18MB(19), v20MB(21), v32MB(33) } ACCESS read-only STATUS mandatory DESCRIPTION "storage medium size." ::= {nvMediastatEntry 11 } -- -- Backhaul instance table definition -- nvTnnlconf OBJECT IDENTIFIER ::= { nevadaSystem 16 } nvTnnlconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvTnnlconf 1} nvTnnlconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvTnnlconf 2} nvTnnlconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnnlconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Backhaul instance table definition." ::= { nvTnnlconf 3 } nvTnnlconfEntry OBJECT-TYPE SYNTAX NvTnnlconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A tunnel table entry containing objects which configure a tunnel protocol." INDEX { nvTnnlconfIndex } ::= { nvTnnlconfTable 1 } NvTnnlconfEntry ::= SEQUENCE { nvTnnlconfIndex INTEGER, nvTnnlconfPortname DisplayString, nvTnnlconfRsrcpool DisplayString, nvTnnlconfLineprot INTEGER, nvTnnlconfProt INTEGER, nvTnnlconfRtmethod INTEGER, nvTnnlconfNetaddr DisplayString, nvTnnlconfUserdata DisplayString, nvTnnlconfStatus INTEGER } nvTnnlconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backhaul configuration entry index number." ::= { nvTnnlconfEntry 1 } nvTnnlconfPortname OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Port name (portname)" ::= { nvTnnlconfEntry 2 } nvTnnlconfRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource pool name." ::= { nvTnnlconfEntry 3 } -- 4 is reserved nvTnnlconfLineprot OBJECT-TYPE SYNTAX INTEGER { dontcare(2), -- Dont know or care what protocol is on line (+1) rfc1662(3) -- RFC1662 PPP in HDLC-like Framing } ACCESS read-write STATUS mandatory DESCRIPTION "Backhaul line protocol." ::= { nvTnnlconfEntry 5 } nvTnnlconfProt OBJECT-TYPE SYNTAX INTEGER { transparent(2), -- Transparent encapsulation (+1) rfc1598(3) -- RFC1598 PPP in X25 } ACCESS read-write STATUS mandatory DESCRIPTION "Backhaul line protocol." ::= { nvTnnlconfEntry 6 } nvTnnlconfRtmethod OBJECT-TYPE SYNTAX INTEGER { useconfig(2), -- Route to netaddr/userdata in this record (+1) usecallednm(3), -- Route on ISDN called party number usecalledsb(4) -- Route on ISDN called party subaddress } ACCESS read-write STATUS mandatory DESCRIPTION "Backhaul routing protocol." ::= { nvTnnlconfEntry 7 } -- 8 is reserved nvTnnlconfNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Backhaul network address when rtmethod is useconfig." ::= { nvTnnlconfEntry 9 } nvTnnlconfUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Backhaul configuration user data." ::= { nvTnnlconfEntry 10 } nvTnnlconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvTnnlconfEntry 11 } -- Backhaul instance status table definition nvTnnlstat OBJECT IDENTIFIER ::= { nevadaSystem 17 } nvTnnlstatfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvTnnlstat 1} nvTnnlstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvTnnlstat 2} nvTnnlstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnnlstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Backhaul instance status table definition." ::= { nvTnnlstat 3 } nvTnnlstatEntry OBJECT-TYPE SYNTAX NvTnnlstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A tunnel status table entry containing fields which store tunnel status information." INDEX { nvTnnlstatIndex } ::= { nvTnnlstatTable 1 } NvTnnlstatEntry ::= SEQUENCE { nvTnnlstatIndex INTEGER, nvTnnlstatPortname DisplayString, nvTnnlstatRsrcpool DisplayString, nvTnnlstatConnstat INTEGER, nvTnnlstatRtstring DisplayString, nvTnnlstatNetaddr DisplayString, nvTnnlstatUserdata DisplayString, nvTnnlstatCallatts Counter, nvTnnlstatCallattfs Counter, nvTnnlstatInframes Counter, nvTnnlstatOutframes Counter, nvTnnlstatDtreset DisplayString } nvTnnlstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Backhaul status entry index number." ::= { nvTnnlstatEntry 1 } nvTnnlstatPortname OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Port on which this Backhaul status entry is applied." ::= { nvTnnlstatEntry 2 } nvTnnlstatRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Resource pool on which this Backhaul status entry is applied." ::= { nvTnnlstatEntry 3 } nvTnnlstatConnstat OBJECT-TYPE SYNTAX INTEGER { tunnelnocb(2), -- Couldnt get control block for Tunnel. (+1) tunnelnoport(3), -- Tunnel has no connected port. Must reboot. tunnelinactive(4), -- Tunnel instance currently idle tunnelcalling(5), -- Tunnel currently establishing tunnel path tunnelactive(6) -- Tunnel tunnel path established } ACCESS read-only STATUS mandatory DESCRIPTION "Current connection status." ::= { nvTnnlstatEntry 4 } nvTnnlstatRtstring OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "String upon which routing was based." ::= { nvTnnlstatEntry 5 } nvTnnlstatNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Network address to which call was routed." ::= { nvTnnlstatEntry 6 } nvTnnlstatUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE(0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "User data to which call was routed." ::= { nvTnnlstatEntry 7 } -- 8 is reserved nvTnnlstatCallatts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No of attempts to place current call." ::= { nvTnnlstatEntry 9 } nvTnnlstatCallattfs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No of failed attempts to place current call." ::= { nvTnnlstatEntry 10 } nvTnnlstatInframes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No of frames switched from line to tunnel route." ::= { nvTnnlstatEntry 11 } nvTnnlstatOutframes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No of frames switched from tunnel route to line." ::= { nvTnnlstatEntry 12 } nvTnnlstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvTnnlstatEntry 13 } -- DLI configuration table definition nvCDLITable OBJECT-TYPE SYNTAX SEQUENCE OF NvCDLIEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI configuration table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port." ::= { nevadaSystem 18 } nvCDLIEntry OBJECT-TYPE SYNTAX NvCDLIEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI configuration record." INDEX { nvCDLISlotIndex,nvCDLIPortIndex } ::= { nvCDLITable 1 } NvCDLIEntry ::= SEQUENCE { nvCDLISlotIndex INTEGER, nvCDLIPortIndex INTEGER, nvCDLIName DisplayString, nvCDLIFormat INTEGER, nvCDLICode INTEGER, nvCDLIFdl INTEGER, nvCDLISignaling INTEGER, nvCDLILineimp INTEGER, nvCDLIEnable INTEGER, nvCDLICsudsu INTEGER, nvCDLIAtten INTEGER, nvCDLIGain INTEGER, nvCDLIDataInver INTEGER } nvCDLISlotIndex OBJECT-TYPE SYNTAX INTEGER (1..17) ACCESS read-only STATUS mandatory DESCRIPTION "CDLI slot index number." ::= { nvCDLIEntry 1 } nvCDLIPortIndex OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "CDLI card port index number." ::= { nvCDLIEntry 2 } nvCDLIName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the DLI card port such as CDLI1_I2." ::= { nvCDLIEntry 3 } nvCDLIFormat OBJECT-TYPE SYNTAX INTEGER { d4sf(1), -- D4 Superframe (+1) d4esf(2), -- D4 Extended Superframe pcm30(3), -- PCM-30 crc4(4) -- CRC4 Multi Frame } ACCESS read-write STATUS mandatory DESCRIPTION "Frame format." ::= { nvCDLIEntry 4 } nvCDLICode OBJECT-TYPE SYNTAX INTEGER { ami(1), -- Alternated Mark Inversion (+1) b8zs(2), -- Binary 8 zero subsitution hdb3(3) -- HDB3 } ACCESS read-write STATUS mandatory DESCRIPTION "Code format." ::= { nvCDLIEntry 5 } nvCDLIFdl OBJECT-TYPE SYNTAX INTEGER { none(1), -- No Facilites Data Link (+1) att(2), -- AT&T 54016 Format ansi(3) -- ANSI T1.403 } ACCESS read-write STATUS mandatory DESCRIPTION "Facilities data link format." ::= { nvCDLIEntry 6 } nvCDLISignaling OBJECT-TYPE SYNTAX INTEGER { ccs(1), -- CCS time slot 16 for E1 time slot 24 for T1 (+1) rbs(2) -- Robbed bit signaling for T1 } ACCESS read-write STATUS mandatory DESCRIPTION "Signal type." ::= { nvCDLIEntry 7 } nvCDLILineimp OBJECT-TYPE SYNTAX INTEGER { ohm-120(1), -- E1 120 OHM (+1) ohm-75(2), -- E1 75 OHM ohm-100(3) -- T1 100 OHM } ACCESS read-write STATUS mandatory DESCRIPTION "Line impedance." ::= { nvCDLIEntry 8 } nvCDLIEnable OBJECT-TYPE SYNTAX INTEGER { yes(1), -- Enable yes (+1) no(2) -- Enable no } ACCESS read-write STATUS mandatory DESCRIPTION "Port enable." ::= { nvCDLIEntry 9 } nvCDLICsudsu OBJECT-TYPE SYNTAX INTEGER { yes(1), -- Enable yes (+1) no(2) -- Enable no } ACCESS read-write STATUS mandatory DESCRIPTION "csudsu enabled or not." ::= { nvCDLIEntry 10 } nvCDLIAtten OBJECT-TYPE SYNTAX INTEGER { t130(1), -- 0, T1 3 DB t124(2), -- 1, T1 2.4 DB t118(3), -- 2, T1 1.8 DB t112(4), -- 3, T1 1.2 DB t16(5), -- 4, T1 .6 DB t10(6), -- 5, T1 0 DB t1neg75(7), -- 6, T1 -7.5 DB t1neg150(8), -- 7, T1 -15 DB t1neg225(9) -- 8, T1 -22.5 DB } ACCESS read-write STATUS mandatory DESCRIPTION "Attenuation of the line ." ::= { nvCDLIEntry 11 } nvCDLIGain OBJECT-TYPE SYNTAX INTEGER { g12db(1), -- 0, 12 DB g26db(2), -- 1, 26 DB g36db(3), -- 2, 36 DB g43db(4) -- 3, 43 DB } ACCESS read-write STATUS mandatory DESCRIPTION "Gain of the receiver." ::= { nvCDLIEntry 12 } nvCDLIDataInver OBJECT-TYPE SYNTAX INTEGER { yes(1), -- Enable yes (+1) no(2) -- Enable no } ACCESS read-write STATUS mandatory DESCRIPTION "Data inversion enabled or not." ::= { nvCDLIEntry 13 } -- -- sdlix - DLI statistics table definition -- nvSDLITable OBJECT-TYPE SYNTAX SEQUENCE OF NvSDLIEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI statistics table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port." ::= { nevadaSystem 19 } nvSDLIEntry OBJECT-TYPE SYNTAX NvSDLIEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI statistics record." INDEX { nvSDLISlotIndex,nvSDLIPortIndex } ::= { nvSDLITable 1 } NvSDLIEntry ::= SEQUENCE { nvSDLISlotIndex INTEGER, nvSDLIPortIndex INTEGER, nvSDLISdlinm DisplayString, nvSDLIDlitype DisplayString, nvSDLICurstate INTEGER, nvSDLIRedcnts Counter, nvSDLIYelcnts Counter, nvSDLIBlucnts Counter, nvSDLIErrcnt Counter, nvSDLITxundrun --pkg 84 Counter, --AF nvSDLIRxfrmslp --AF Counter, --AF nvSDLIDtreset DisplayString } nvSDLISlotIndex OBJECT-TYPE SYNTAX INTEGER (1..17) ACCESS read-only STATUS mandatory DESCRIPTION "SDLI slot index number." ::= { nvSDLIEntry 1 } nvSDLIPortIndex OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port index number." ::= { nvSDLIEntry 2 } nvSDLISdlinm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "SDLI entry name such as SDLI1_I2." ::= { nvSDLIEntry 3 } nvSDLIDlitype OBJECT-TYPE SYNTAX DisplayString (SIZE(0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port type such as E1 or T1." ::= { nvSDLIEntry 4 } nvSDLICurstate OBJECT-TYPE SYNTAX INTEGER { ok(1), -- DLI Up (+1) unknwn(2), -- DLI Unknown State down(3), -- DLI Down red(4), -- DLI Red Alarm State blue(5), -- DLI Blue Alarm State yell(6), -- DLI Yellow Alarm State mLine(7), -- DLI Line Maintenance Mode mPay(8), -- DLI Payload Maintenance Mode busyAIS(9) -- DLI Busied out sending AIS } ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port current device state." ::= { nvSDLIEntry 5 } nvSDLIRedcnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port red alarm count." ::= { nvSDLIEntry 6 } nvSDLIYelcnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port yellow alarm count." ::= { nvSDLIEntry 7 } nvSDLIBlucnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port blue alarm count." ::= { nvSDLIEntry 8 } nvSDLIErrcnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SDLI card port crc alarm count." ::= { nvSDLIEntry 9 } nvSDLITxundrun OBJECT-TYPE --pkg 84 SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "TX underrun count." --pkg 84 ::= { nvSDLIEntry 10 } --AF nvSDLIRxfrmslp OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "RX Slip count." --AF ::= { nvSDLIEntry 11 } --AF nvSDLIDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvSDLIEntry 12 } -- Usage group configuration table nvUgconf OBJECT IDENTIFIER ::= { nevadaSystem 20 } nvUgconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvUgconf 1} nvUgconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvUgconf 2} nvUgconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvUgconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Device usage group configuration table." ::= { nvUgconf 3 } nvUgconfEntry OBJECT-TYPE SYNTAX NvUgconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Device usage group configuration record." INDEX { nvUgconfIndex } ::= { nvUgconfTable 1 } NvUgconfEntry ::= SEQUENCE { nvUgconfIndex INTEGER, nvUgconfName DisplayString, nvUgconfPool DisplayString, nvUgconfNumrsrvd INTEGER, nvUgconfThreshld INTEGER, nvUgconfMaxbw INTEGER, nvUgconfStatus INTEGER } nvUgconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Usage group entry index number." ::= { nvUgconfEntry 1 } -- 2 is reserved -- 3 is reserved -- 4 is reserved nvUgconfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Usage group entry name." ::= { nvUgconfEntry 5 } -- 6 is reserved -- 7 is reserved nvUgconfPool OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Usage group entry resource pool name." ::= { nvUgconfEntry 8 } -- 9 is reserved -- 10 is reserved nvUgconfNumrsrvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of devices reserved for this entry." ::= { nvUgconfEntry 11 } -- 12 is reserved -- 13 is reserved nvUgconfThreshld OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allocation of disallowance thrreshold for this entry." ::= { nvUgconfEntry 14 } -- 15 is reserved -- 16 is reserved nvUgconfMaxbw OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated to this entry." ::= { nvUgconfEntry 17 } -- 18 is reserved -- 19 is reserved nvUgconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvUgconfEntry 20 } -- Usage group configuration table nvUgstat OBJECT IDENTIFIER ::= { nevadaSystem 21 } nvUgstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvUgstat 1} nvUgstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvUgstat 2} nvUgstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvUgstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Device usage group statistics table." ::= { nvUgstat 3 } nvUgstatEntry OBJECT-TYPE SYNTAX NvUgstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Device usage group statistics record." INDEX { nvUgstatIndex } ::= { nvUgstatTable 1 } NvUgstatEntry ::= SEQUENCE { nvUgstatIndex INTEGER, nvUgstatName DisplayString, nvUgstatPool DisplayString, nvUgstatNumused INTEGER, nvUgstatBwused INTEGER, nvUgstatBwrejs Counter, nvUgstatUnavrejs Counter, nvUgstatThresrejs Counter, nvUgstatDtreset DisplayString } nvUgstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Usage group statistics entry index number." ::= { nvUgstatEntry 1 } nvUgstatName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Usage group statistics entry name." ::= { nvUgstatEntry 2 } nvUgstatPool OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Usage group statistics entry resource pool name." ::= { nvUgstatEntry 3 } nvUgstatNumused OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of devices allocated to this group." ::= { nvUgstatEntry 4 } nvUgstatBwused OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Amount of bandwidth allocated to this group." ::= { nvUgstatEntry 5 } nvUgstatBwrejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Rejections to this group due to bandwidth restrain." ::= { nvUgstatEntry 6 } nvUgstatUnavrejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Rejections to this group due to device unavailability." ::= { nvUgstatEntry 7 } nvUgstatThresrejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Rejections to this group due to threshold restriction." ::= { nvUgstatEntry 8 } nvUgstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvUgstatEntry 9 } -- Device pool registry statistics table nvDrstat OBJECT IDENTIFIER ::= { nevadaSystem 22 } nvDrstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDrstat 1} nvDrstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDrstat 2} nvDrstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Device pool registry statistics." ::= { nvDrstat 3 } nvDrstatEntry OBJECT-TYPE SYNTAX NvDrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Device pool registry statistics record." INDEX { nvDrstatIndex } ::= { nvDrstatTable 1 } NvDrstatEntry ::= SEQUENCE { nvDrstatIndex INTEGER, nvDrstatName DisplayString, nvDrstatClass INTEGER, nvDrstatNumdev INTEGER, nvDrstatNumrsrvd INTEGER, nvDrstatNumavail INTEGER, nvDrstatNumused INTEGER, nvDrstatMaxused INTEGER, nvDrstatDtreset DisplayString } nvDrstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device pool registry statistics entry index number." ::= { nvDrstatEntry 1 } nvDrstatName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Device pool registry statistics entry name." ::= { nvDrstatEntry 2 } nvDrstatClass OBJECT-TYPE SYNTAX INTEGER { port(1), dsp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Device class of this pool." ::= { nvDrstatEntry 3 } nvDrstatNumdev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of devices registered to this pool." ::= { nvDrstatEntry 4 } nvDrstatNumrsrvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of devices reserved to this pool." ::= { nvDrstatEntry 5 } nvDrstatNumavail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of devices available for allocation." ::= { nvDrstatEntry 6 } nvDrstatNumused OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of devices presently allocated for use." ::= { nvDrstatEntry 7 } nvDrstatMaxused OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of numused since last box reset." ::= { nvDrstatEntry 8 } nvDrstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvDrstatEntry 9 } -- Framer card configuration table definition nvCFRMRTable OBJECT-TYPE SYNTAX SEQUENCE OF NvCFRMREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card configuration table definition. The actual framer card database has 17 tables. Each table uses name convention: CFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number." ::= { nevadaSystem 23 } nvCFRMREntry OBJECT-TYPE SYNTAX NvCFRMREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card configuration record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active." INDEX { nvCFRMRSlotIndex,nvCFRMRPortIndex } ::= { nvCFRMRTable 1 } NvCFRMREntry ::= SEQUENCE { nvCFRMRSlotIndex INTEGER, nvCFRMRPortIndex INTEGER, nvCFRMRName DisplayString, nvCFRMRRate INTEGER, nvCFRMREIAtype INTEGER, nvCFRMRClkmode INTEGER, nvCFRMRDebounce INTEGER, nvCFRMREnable INTEGER } nvCFRMRSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Framer card slot number." ::= { nvCFRMREntry 1 } nvCFRMRPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130." ::= { nvCFRMREntry 2 } nvCFRMRName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of a framer card port." ::= { nvCFRMREntry 3 } -- 4 is reserved -- 5 is reserved -- 6 is reserved nvCFRMRRate OBJECT-TYPE SYNTAX INTEGER { undef(1), -- undefined so far (+1) v64K(2), -- 64 Kbps v128K(3), -- 128 Kbps v192K(4), -- 192 Kbps v256K(5), -- 256 Kbps v320K(6), -- 192 Kbps v384K(7), -- 192 Kbps v448K(8), -- 192 Kbps v512K(9), -- 512 Kbps v576K(10), -- 192 Kbps v640K(11), -- 512 Kbps v704K(12), -- 192 Kbps v768K(13), -- 512 Kbps v832K(14), -- 192 Kbps v896K(15), -- 512 Kbps v960K(16), -- 192 Kbps v1024K(17), -- 512 Kbps v1088K(18), -- 512 Kbps v1152K(19), -- 512 Kbps v1216K(20), -- 512 Kbps v1280K(21), -- 512 Kbps v1344K(22), -- 512 Kbps v1408K(23), -- 512 Kbps v1472K(24), -- 512 Kbps v1536K(25), -- 512 Kbps v1600K(26), -- 512 Kbps v1664K(27), -- 512 Kbps v1728K(28), -- 512 Kbps v1792K(29), -- 512 Kbps v1856K(30), -- 512 Kbps v1920K(31), -- 512 Kbps v1984K(32), -- 512 Kbps v2048K(33) -- 2048 Kbps } ACCESS read-write STATUS mandatory DESCRIPTION "Framer card port baud rate." ::= { nvCFRMREntry 7 } -- 8 is reserved -- 9 is reserved nvCFRMREIAtype OBJECT-TYPE SYNTAX INTEGER { v3wire(1), -- 3-wire EIA (+1) vx21bis(2) -- X21bis EIA } ACCESS read-write STATUS mandatory DESCRIPTION "Port interface type." ::= { nvCFRMREntry 10 } -- 11 is reserved -- 12 is reserved nvCFRMRClkmode OBJECT-TYPE SYNTAX INTEGER { insync(1), -- Nevada provides clock (+1) exsync(2) -- Attached device provides clock } ACCESS read-write STATUS mandatory DESCRIPTION "Port clock mode." ::= { nvCFRMREntry 13 } -- 14 is reserved -- 15 is reserved nvCFRMRDebounce OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "WAN port eia debounce interval." ::= { nvCFRMREntry 16 } -- 17 is reserved -- 18 is reserved nvCFRMREnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1) yes(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable port." ::= { nvCFRMREntry 19 } -- 20 is reserved -- 21 is reserved -- Framer card statistics table definition nvSFRMRTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSFRMREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: SFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number." ::= { nevadaSystem 24 } nvSFRMREntry OBJECT-TYPE SYNTAX NvSFRMREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active." INDEX { nvSFRMRSlotIndex,nvSFRMRPortIndex } ::= { nvSFRMRTable 1 } NvSFRMREntry ::= SEQUENCE { nvSFRMRSlotIndex INTEGER, nvSFRMRPortIndex INTEGER, nvSFRMRName DisplayString, nvSFRMRMode INTEGER, nvSFRMRState INTEGER, nvSFRMRRate INTEGER, nvSFRMRCid DisplayString, nvSFRMRRxoff INTEGER, nvSFRMRTxoff INTEGER, nvSFRMRNrxoff INTEGER, nvSFRMRNtxoff INTEGER, nvSFRMRLostfrms Counter, nvSFRMRFerrs INTEGER, nvSFRMRPerrs INTEGER, nvSFRMRRxovrs Counter, nvSFRMRCrcerrs Counter, nvSFRMRRxaborts Counter, nvSFRMRDtreset DisplayString } nvSFRMRSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Framer card slot number." ::= { nvSFRMREntry 1 } nvSFRMRPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130." ::= { nvSFRMREntry 2 } nvSFRMRName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of a framer card port." ::= { nvSFRMREntry 3 } nvSFRMRMode OBJECT-TYPE SYNTAX INTEGER { absent(1), -- hardwwre not present in box (+1) dead(2), -- out of service broken(3), -- broken async(4), -- asynchronous mode sync(5) -- synchronous mode } ACCESS read-only STATUS mandatory DESCRIPTION "The operation mode." ::= { nvSFRMREntry 4 } nvSFRMRState OBJECT-TYPE SYNTAX INTEGER { free(1), -- not claimed (+1) down(2), -- not operating setup(3), -- waiting for modem signal up(4), -- operating test(5) -- loop test being performed } ACCESS read-only STATUS mandatory DESCRIPTION "The operation state." ::= { nvSFRMREntry 5 } nvSFRMRRate OBJECT-TYPE SYNTAX INTEGER { undef(1), -- undefined so far (+1) v64K(2), -- 64 Kbps v128K(3), -- 128 Kbps v192K(4), -- 192 Kbps v256K(5), -- 256 Kbps v320K(6), -- 192 Kbps v384K(7), -- 192 Kbps v448K(8), -- 192 Kbps v512K(9), -- 512 Kbps v576K(10), -- 192 Kbps v640K(11), -- 512 Kbps v704K(12), -- 192 Kbps v768K(13), -- 512 Kbps v832K(14), -- 192 Kbps v896K(15), -- 512 Kbps v960K(16), -- 192 Kbps v1024K(17), -- 512 Kbps v1088K(18), -- 512 Kbps v1152K(19), -- 512 Kbps v1216K(20), -- 512 Kbps v1280K(21), -- 512 Kbps v1344K(22), -- 512 Kbps v1408K(23), -- 512 Kbps v1472K(24), -- 512 Kbps v1536K(25), -- 512 Kbps v1600K(26), -- 512 Kbps v1664K(27), -- 512 Kbps v1728K(28), -- 512 Kbps v1792K(29), -- 512 Kbps v1856K(30), -- 512 Kbps v1920K(31), -- 512 Kbps v1984K(32), -- 512 Kbps v2048K(33) -- 2048 Kbps } ACCESS read-only STATUS mandatory DESCRIPTION "Framer card port baud rate." ::= { nvSFRMREntry 6 } nvSFRMRCid OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Circuit ID of Munich ports." ::= { nvSFRMREntry 7 } nvSFRMRRxoff OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RXOFF" ::= { nvSFRMREntry 8 } nvSFRMRTxoff OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "TXOFF" ::= { nvSFRMREntry 9 } nvSFRMRNrxoff OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RNRXOFF" ::= { nvSFRMREntry 10 } nvSFRMRNtxoff OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RNTXOFF" ::= { nvSFRMREntry 11 } nvSFRMRLostfrms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of lost frames." ::= { nvSFRMREntry 12 } nvSFRMRFerrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FERRS" ::= { nvSFRMREntry 13 } nvSFRMRPerrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PERRS" ::= { nvSFRMREntry 14 } nvSFRMRRxovrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of receive overruns frames." ::= { nvSFRMREntry 15 } nvSFRMRCrcerrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of CRC errors." ::= { nvSFRMREntry 16 } nvSFRMRRxaborts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of receive aborte frames." ::= { nvSFRMREntry 17 } nvSFRMRDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvSFRMREntry 18 } -- -- slot statistics table definition -- nvSlotstat OBJECT IDENTIFIER ::= { nevadaSystem 25 } nvSlotstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvSlotstat 1} nvSlotstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvSlotstat 2} nvSlotstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSlotstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Slot statistics table definition." ::= { nvSlotstat 3 } nvSlotstatEntry OBJECT-TYPE SYNTAX NvSlotstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada product is a 17 slot chassis. Each slot can be plugged in a communication card module. The module can be a Host Packet, Framer or DLI card module. The system can have only one Host Module and up to two Framer card module. This table contains statistics information for each slot." INDEX { nvSlotstatIndex } ::= { nvSlotstatTable 1 } NvSlotstatEntry ::= SEQUENCE { nvSlotstatIndex INTEGER, nvSlotstatName DisplayString, nvSlotstatCardType INTEGER, nvSlotstatIotype INTEGER, nvSlotstatCpu INTEGER, nvSlotstatRam DisplayString, nvSlotstatStatus DisplayString, nvSlotstatCardid DisplayString, nvSlotstatHwRevision DisplayString, nvSlotstatCatPartnum DisplayString, nvSlotstatSrNumber DisplayString, nvSlotstatProdChkDate DisplayString } nvSlotstatIndex OBJECT-TYPE SYNTAX INTEGER (1..17) ACCESS read-only STATUS mandatory DESCRIPTION "Slot index number." ::= { nvSlotstatEntry 1 } nvSlotstatName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "Slot name." ::= { nvSlotstatEntry 2 } nvSlotstatCardType OBJECT-TYPE SYNTAX INTEGER { empty (1), -- empty (+1) dliE1 (2), -- Digital Line Interface card dliT1 (3), -- Digital Line Interface card framer (4), -- FRAMER card dsp (5), -- Digital Signal Processor Card phost (6), -- Packet Host qpsPower (7), -- Power Supply framer2 (8), -- FRAMER card type II qDE1 (9), -- DLI, access bus compatible qDT1 (10), -- DLI card, access bus compatible oDLI (11), -- ODLI T1 (CSU), access bus compatible fRMR (12), -- Framer1++ card, access bus compatible ps (13), -- Power Supply, access bus compatible none (51), -- no i/o card pHOSTIO (52), -- standard p1acket host i/o card fRMRIO (53), -- standard framer card i/o card e1IO (55), -- standard qdli-e1 i/o card t1IO (56), -- standard qdli-t1 i/o card pOWERIO (57), -- power entry module i/o card v11EXT (58), -- V11 EXT type framer I/O card v11INT (59), -- V11 INT type framer I/O card v35 (60), -- V35 type framer I/O card v24V35 (61), -- V24V35 type framer I/O card v24 (62), -- V24 type framer I/O card qDE1IO (63), -- QDLI E1 type I/O card qDT1IO (64), -- QDLI T1 type I/O card oDIO (65), -- ODLI T1 (CSU) type I/O card pEM (66), -- POWER ENTRY MODULE pHIOM (67) -- PH/CPUM I/O } ACCESS read-only STATUS mandatory DESCRIPTION "Slot card type." ::= { nvSlotstatEntry 3 } nvSlotstatIotype OBJECT-TYPE SYNTAX INTEGER { empty (1), -- empty none (51), -- no i/o card (+1) phostIo (52), -- standard packet host i/o card frmrIo (53), -- standard framer card i/o card e1Io (54), -- standard qdli-e1 i/o card t1Io (56), -- standard qdli-t1 i/o card powerIo (57), -- Power Supply v11ext (58), -- V11 EXT type framer I/O card v11int (59), -- V11 INT type framer I/O card v35 (60), -- V35 type framer I/O card v24v35 (61), -- V24V35 type framer I/O card v24 (62), -- V24 type framer I/O card qDE1IO (63), -- QDLI E1 type I/O card qDT1IO (64), -- QDLI T1 type I/O card oDIO (65), -- ODLI T1 (CSU) type I/O card pEM (66), -- POWER ENTRY MODULE pHIOM (67) -- PH/CPUM I/O } ACCESS read-only STATUS mandatory DESCRIPTION "Slot IO type." ::= { nvSlotstatEntry 4 } nvSlotstatCpu OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- not applicable to this type of card (+1) p5-100(2), -- standard cpu for packet host i960JF(3), -- standard cpu for framer card adsp2181(4) -- standard cpu for DLI card } ACCESS read-only STATUS mandatory DESCRIPTION "Slot IO type." ::= { nvSlotstatEntry 5 } -- 6 is reserved nvSlotstatRam OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Amount of RAM on card." ::= { nvSlotstatEntry 6 } nvSlotstatStatus OBJECT-TYPE SYNTAX INTEGER { good(1), -- Card is working failure(2), -- Card is failing notPowered(3), -- Power Supply -48 volts not supplied notapplicable(4) -- not applicable, status only pertains to power supply and Framer } ACCESS read-only STATUS mandatory DESCRIPTION "Status of card as given by bats. good(1), -- Card is working failure(2), -- Card is failing notPowered(3), -- Power Supply -48 volts not supplied notapplicable(4) -- not applicable " ::= { nvSlotstatEntry 7 } nvSlotstatCardid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "Card id from eeprom." ::= { nvSlotstatEntry 8 } nvSlotstatHwRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware Revision of the board." ::= { nvSlotstatEntry 9 } nvSlotstatCatPartnum OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Catalog part number." ::= { nvSlotstatEntry 10 } nvSlotstatSrNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Serial Number." ::= { nvSlotstatEntry 11 } nvSlotstatProdChkDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Production Check Date." ::= { nvSlotstatEntry 12 } -- -- DSP configuration table definition -- nvCDSPTable OBJECT-TYPE SYNTAX SEQUENCE OF NvCDSPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DSP configuration table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port." ::= { nevadaSystem 26 } nvCDSPEntry OBJECT-TYPE SYNTAX NvCDSPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI configuration record." INDEX { nvCDSPSlotIndex,nvCDSPPortIndex } ::= { nvCDSPTable 1 } NvCDSPEntry ::= SEQUENCE { nvCDSPSlotIndex INTEGER, nvCDSPPortIndex INTEGER, nvCDSPName DisplayString, nvCDSPEnable INTEGER, nvCDSPNumfaicon INTEGER, nvCDSPNumload INTEGER } nvCDSPSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..17) ACCESS read-only STATUS mandatory DESCRIPTION "CDSP slot number." ::= { nvCDSPEntry 1 } nvCDSPPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CDSP port number." ::= { nvCDSPEntry 2 } nvCDSPName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "CDSP port name." ::= { nvCDSPEntry 3 } -- 4 is reserved -- 5 is reserved -- 6 is reserved -- 7 is reserved nvCDSPEnable OBJECT-TYPE SYNTAX INTEGER { yes(2), -- enabled (+1) slowno(3), -- disabled gracefully fastno(4) -- disabled fast } ACCESS read-write STATUS mandatory DESCRIPTION "CDSP port enable control." ::= { nvCDSPEntry 8 } nvCDSPNumfaicon OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "CDSP num of consecutive hand shakes failed." ::= { nvCDSPEntry 9 } nvCDSPNumload OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "CDSP num of times redownload failed." ::= { nvCDSPEntry 10 } -- 11 is reserved -- 12 is reserved -- DSP statistics table definition nvSDSPTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSDSPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DSP statistics table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port." ::= { nevadaSystem 27 } nvSDSPEntry OBJECT-TYPE SYNTAX NvSDSPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DLI configuration record." INDEX { nvSDSPSlotIndex,nvSDSPPortIndex } ::= { nvSDSPTable 1 } NvSDSPEntry ::= SEQUENCE { nvSDSPSlotIndex INTEGER, nvSDSPPortIndex INTEGER, nvSDSPName DisplayString, nvSDSPState INTEGER, nvSDSPNumfaicon INTEGER, nvSDSPNumload INTEGER, nvSDSPFailcaus INTEGER, nvSDSPNumcalls --AF Counter, --AF nvSDSPNumfnegs --AF Counter, --AF nvSDSPDtreset DisplayString, nvSDSPNumIncom Counter, nvSDSPNumOutgo Counter, nvSDSPNumIfailneg Counter, nvSDSPNumOfailneg Counter, nvSDSPEvent1 Counter, nvSDSPEvent2 Counter, nvSDSPEvent3 Counter, nvSDSPEvent4 Counter, nvSDSPEvent5 Counter, nvSDSPEvent6 Counter, nvSDSPEvent7 Counter, nvSDSPEvent8 Counter, nvSDSPEvent9 Counter, nvSDSPEvent10 Counter, nvSDSPEvent11 Counter, nvSDSPEvent12 Counter } nvSDSPSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..17) ACCESS read-only STATUS mandatory DESCRIPTION "SDSP slot number." ::= { nvSDSPEntry 1 } nvSDSPPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SDSP port number." ::= { nvSDSPEntry 2 } nvSDSPName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "SDSP port name." ::= { nvSDSPEntry 3 } nvSDSPState OBJECT-TYPE SYNTAX INTEGER { idle(2), -- DSP is ready to connect (+1) busy(3), -- DSP has at least 1 active SCSA channel dead(4), -- DSP marked DEAD by software asleep(5), -- DSP marked ASLEEP by configurator dwld(6) -- DSP download not finished } ACCESS read-only STATUS mandatory DESCRIPTION "CDSP port state." ::= { nvSDSPEntry 4 } nvSDSPNumfaicon OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of consecutive handshake failures." ::= { nvSDSPEntry 5 } nvSDSPNumload OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of redownload attempts failed." ::= { nvSDSPEntry 6 } nvSDSPFailcaus OBJECT-TYPE SYNTAX INTEGER { healthy(2), -- DSP has not failed yet (+1) dwldFail(3), portUpFail(4), handshkeAbort(5), handshkeTimeout(6), llHandAbort(7), llHandTimeout(8), llHandHsAbo(9), cmdTimeout(10), monRegTimeout(11), clrDownTimeout(12), chCreErrNoReload(13), chCreErrReload(14), userDown(15), handModify(16), userReset(17), notUsable(18) } ACCESS read-only STATUS mandatory DESCRIPTION "SDSP port state." ::= { nvSDSPEntry 7 } nvSDSPNumcalls OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of calls processed on this DSP." --AF ::= {nvSDSPEntry 8 } --AF nvSDSPNumfnegs OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of calls faild prior to negotiation start." --AF ::= {nvSDSPEntry 9 } --AF nvSDSPDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvSDSPEntry 10 } nvSDSPNumIncom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of INcoming calls made to this DSP." ::= { nvSDSPEntry 11 } nvSDSPNumOutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of OUTgoing calls made to this DSP." ::= { nvSDSPEntry 12 } nvSDSPNumIfailneg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of failed negotiations INcoming." ::= { nvSDSPEntry 13 } nvSDSPNumOfailneg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of failed negotiations OUTgoing." ::= { nvSDSPEntry 14 } nvSDSPEvent1 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- primary modem hs ended in abort condition." ::= { nvSDSPEntry 15 } nvSDSPEvent2 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- primary modem hs ended in timeout condition." ::= { nvSDSPEntry 16 } nvSDSPEvent3 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Link layer modem hs ended in abort condition." ::= { nvSDSPEntry 17 } nvSDSPEvent4 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Link layer modem hs ende in timeout condition." ::= { nvSDSPEntry 18 } nvSDSPEvent5 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Link layer modem hs ended in primary hs aborted condition." ::= { nvSDSPEntry 19 } nvSDSPEvent6 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Command Response Timeout error." ::= { nvSDSPEntry 20 } nvSDSPEvent7 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Cleardown procedure ended in timeout condition." ::= { nvSDSPEntry 21 } nvSDSPEvent8 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Moniter Register timeout error." ::= { nvSDSPEntry 22 } nvSDSPEvent9 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- Port Up failure No SABM from DSP to start the session." ::= { nvSDSPEntry 23 } nvSDSPEvent10 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- CHCRERR - with DSP Fail logic optioned." ::= { nvSDSPEntry 24 } nvSDSPEvent11 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- CHCRERR - with DSP Fail logic not optioned." ::= { nvSDSPEntry 25 } nvSDSPEvent12 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "DMOD- modify action in SDSPx caused numfaicon threshold to be reached." ::= { nvSDSPEntry 26 } -- -- croute file -- nvCroute OBJECT IDENTIFIER ::= { nevadaSystem 28 } nvCrouteMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvCroute 1} nvCrouteNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvCroute 2} nvCrouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NvCrouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Circuit routing table." ::= { nvCroute 3 } nvCrouteEntry OBJECT-TYPE SYNTAX NvCrouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Circuit routing table record." INDEX { nvCrouteIndex } ::= { nvCrouteTable 1 } NvCrouteEntry ::= SEQUENCE { nvCrouteIndex INTEGER, nvCrouteAddr DisplayString, nvCrouteRouting INTEGER, nvCrouteType INTEGER, nvCrouteVol1prot INTEGER, nvCrouteVol1mode INTEGER, nvCrouteBw INTEGER, nvCrouteRcscp1 DisplayString, nvCrouteRcscp2 DisplayString, nvCrouteDialmapid INTEGER, nvCrouteReserve1 DisplayString, nvCrouteDirection INTEGER, nvCrouteChoice INTEGER, nvCrouteStatus INTEGER } nvCrouteIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of croute record." ::= { nvCrouteEntry 1 } nvCrouteAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Address." ::= { nvCrouteEntry 10 } nvCrouteRouting OBJECT-TYPE SYNTAX INTEGER { noroute(1), -- (+1) callednum(2), callngnum(3), calledsub(4), callngsub(5) } ACCESS read-write STATUS mandatory DESCRIPTION "routing new var." ::= { nvCrouteEntry 11 } nvCrouteType OBJECT-TYPE SYNTAX INTEGER { switched(2), -- switched circuit (+1) pernament(3) -- pernament circuit } ACCESS read-write STATUS mandatory DESCRIPTION "circuit type." ::= { nvCrouteEntry 13 } nvCrouteVol1prot OBJECT-TYPE SYNTAX INTEGER { noprot(1), -- no layer1 protocol specified dcprot(2), -- dont care about layer1 protocol g711a(3), -- layer1 protocol is G-711 A-law g711mu(4), -- layer1 protocol is G-711 MU-law g711(5), -- layer1 protocol is G-711 A- or MU-law v110(6), -- layer1 protocol is V-110 v120(7) -- layer1 protocol is V-120 } ACCESS read-write STATUS mandatory DESCRIPTION "Protocol Specified." ::= { nvCrouteEntry 15 } nvCrouteVol1mode OBJECT-TYPE SYNTAX INTEGER { nomode(1), --AF no data mode specified dcmode(2), --AF dont care about data mode sync(3), -- data mode is async async(4) -- data mode is sync } ACCESS read-write STATUS mandatory DESCRIPTION "Data mode." ::= { nvCrouteEntry 17 } nvCrouteBw OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvCrouteEntry 19 } nvCrouteRcscp1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "rcscp1." ::= { nvCrouteEntry 22 } nvCrouteRcscp2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "rcscp1." ::= { nvCrouteEntry 25 } nvCrouteDialmapid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Record id of dialmap record to use." ::= { nvCrouteEntry 27 } nvCrouteReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..2)) ACCESS read-only STATUS obsolete DESCRIPTION "OBSOLETE - removed field." ::= { nvCrouteEntry 28 } nvCrouteDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), --CROUTE for incoming calls outgoing(2), --CROUTE for outgoing calls unspec (3) --CROUTE for all calls } ACCESS read-write STATUS mandatory DESCRIPTION "Direction record is for." ::= { nvCrouteEntry 29 } nvCrouteChoice OBJECT-TYPE SYNTAX INTEGER { first(1), second(2), third(3), fourth(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A priority value. Used to specify which record gets precedence if two records have the same addr." ::= { nvCrouteEntry 30 } nvCrouteStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvCrouteEntry 31 } -- -- crcstat file -- nvCrcstat OBJECT IDENTIFIER ::= { nevadaSystem 29 } nvCrcstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvCrcstat 1} nvCrcstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvCrcstat 2} nvCrcstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvCrcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Circuit connection status table." ::= { nvCrcstat 3 } nvCrcstatEntry OBJECT-TYPE SYNTAX NvCrcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "crcstat record indexed by record number." INDEX { nvCrcstatIndex } ::= { nvCrcstatTable 1 } NvCrcstatEntry ::= SEQUENCE { nvCrcstatIndex INTEGER, nvCrcstatCid INTEGER, nvCrcstatState INTEGER, nvCrcstatCallednum --AF DisplayString, --AF nvCrcstatCallngnum --AF DisplayString, --AF nvCrcstatCalledsub --AF DisplayString, --AF nvCrcstatCallngsub --AF DisplayString, --AF nvCrcstatRcsc0 DisplayString, nvCrcstatDevice0 DisplayString, nvCrcstatRcsc1 DisplayString, nvCrcstatDevice1 DisplayString, nvCrcstatRcsc2 DisplayString, nvCrcstatDevice2 DisplayString, nvCrcstatReserve1 DisplayString, nvCrcstatReserve2 DisplayString, nvCrcstatL1prot --AF INTEGER, --AF nvCrcstatL1mode --AF INTEGER, --AF nvCrcstatCroute --AF INTEGER, --AF nvCrcstatRouting --AF INTEGER, --AF nvCrcstatBw INTEGER, nvCrcstatDirection INTEGER } nvCrcstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of crcstat record." ::= { nvCrcstatEntry 1 } nvCrcstatCid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "circuit connection identifier." ::= { nvCrcstatEntry 2 } nvCrcstatState OBJECT-TYPE SYNTAX INTEGER { pending(1), -- pending (+1) connecting(2), connected(3), clearing(4), hung(5) } ACCESS read-only STATUS mandatory DESCRIPTION "circuit connection state." ::= { nvCrcstatEntry 3 } nvCrcstatCallednum OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only STATUS mandatory --AF DESCRIPTION --AF "called party address." --AF ::= { nvCrcstatEntry 4 } --AF nvCrcstatBw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bandwidth of permanent circuit." ::= { nvCrcstatEntry 5 } nvCrcstatRcsc0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 0." ::= { nvCrcstatEntry 6 } nvCrcstatDevice0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "device info 0." ::= { nvCrcstatEntry 7 } nvCrcstatRcsc1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 1." ::= { nvCrcstatEntry 8 } nvCrcstatDevice1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "device info 1." ::= { nvCrcstatEntry 9 } nvCrcstatRcsc2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 2." ::= { nvCrcstatEntry 10 } nvCrcstatDevice2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "device info 2." ::= { nvCrcstatEntry 11 } nvCrcstatReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..2)) ACCESS read-only STATUS obsolete DESCRIPTION "OBSOLETE - removed field." ::= { nvCrcstatEntry 12 } nvCrcstatReserve2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..2)) ACCESS read-only STATUS obsolete DESCRIPTION "OBSOLETE - removed field." ::= { nvCrcstatEntry 13 } nvCrcstatCallngnum OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "calling party address." --AF ::= { nvCrcstatEntry 14 } --AF nvCrcstatCalledsub OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "called party subaddress." --AF ::= { nvCrcstatEntry 15 } --AF nvCrcstatCallngsub OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "calling party subaddress." --AF ::= { nvCrcstatEntry 16 } --AF nvCrcstatL1prot OBJECT-TYPE --AF SYNTAX INTEGER { --AF noprot(1), --AF (+1) dcprot(2), --AF g711A(3), --AF g711MU(4), --AF g711(5), --AF v110(6), --AF v120(7) --AF } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "L1prot." --AF ::= { nvCrcstatEntry 17 } --AF nvCrcstatL1mode OBJECT-TYPE --AF SYNTAX INTEGER { --AF nomode(1), --AF (+1) no data mode specified dcmode(2), --AF dont care about data mode sync(3), --AF data in sync mode async(4) --AF data in async mode } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Layer 1 data mode." --AF ::= { nvCrcstatEntry 18 } --AF nvCrcstatCroute OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Croute record id used." --AF ::= { nvCrcstatEntry 19 } --AF nvCrcstatRouting OBJECT-TYPE --AF SYNTAX INTEGER { --AF noroute(1), --AF (+1) routing not done callednum(2), --AF route on called address callngnum(3), --AF route on calling address calledsub(4), --AF route on called sub address callngsub(5) --AF route on calling sub address } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Routing method." --AF ::= { nvCrcstatEntry 20 } --AF nvCrcstatDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), --CROUTE for incoming calls outgoing(2), --CROUTE for outgoing calls unspec (3) --CROUTE for all calls } ACCESS read-only STATUS mandatory DESCRIPTION "Direction call was in." ::= { nvCrcstatEntry 21 } -- -- crfstat file -- nvCrfstat OBJECT IDENTIFIER ::= { nevadaSystem 30 } nvCrfstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvCrfstat 1} nvCrfstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvCrfstat 2} nvCrfstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvCrfstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Circuit failure status table." ::= { nvCrfstat 3 } nvCrfstatEntry OBJECT-TYPE SYNTAX NvCrfstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "crfstat record indexed by record number." INDEX { nvCrfstatIndex } ::= { nvCrfstatTable 1 } NvCrfstatEntry ::= SEQUENCE { nvCrfstatIndex INTEGER, nvCrfstatCid INTEGER, nvCrfstatCallednum --AF DisplayString, --AF nvCrfstatCallngnum --AF DisplayString, --AF nvCrfstatCalledsub --AF DisplayString, --AF nvCrfstatCallngsub --AF DisplayString, --AF nvCrfstatL1prot --AF INTEGER, --AF nvCrfstatL1mode --AF INTEGER, --AF nvCrfstatCroute --AF INTEGER, --AF nvCrfstatRouting --AF INTEGER, --AF nvCrfstatAddr --AF DisplayString, --AF nvCrfstatCause --AF INTEGER, --AF nvCrfstatRcsc0 DisplayString, nvCrfstatRcsc1 DisplayString, nvCrfstatRcsc2 DisplayString, nvCrfstatReserve1 DisplayString, nvCrfstatDirection INTEGER } nvCrfstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of crfstat record." ::= { nvCrfstatEntry 1 } nvCrfstatCid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "circuit connection identifier." ::= { nvCrfstatEntry 2 } nvCrfstatCallednum OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "called party address." --AF ::= { nvCrfstatEntry 3 } --AF nvCrfstatCallngnum OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "calling party address." --AF ::= { nvCrfstatEntry 4 } --AF nvCrfstatCalledsub OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "called party subaddress." --AF ::= { nvCrfstatEntry 5 } --AF nvCrfstatCallngsub OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "calling party subaddress." --AF ::= { nvCrfstatEntry 6 } --AF nvCrfstatL1prot OBJECT-TYPE --AF SYNTAX INTEGER { --AF noprot(1), --AF dcprot(2), --AF g711A(3), --AF g711MU(4), --AF g711(5), --AF v110(6), --AF v120(7) --AF } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "L1prot." --AF ::= { nvCrfstatEntry 7 } --AF nvCrfstatL1mode OBJECT-TYPE --AF SYNTAX INTEGER { --AF nomode(1), --AF (+1) no data mode specified dcprot(2), --AF dont care about data mode sync(3), --AF data in sync mode async(4) --AF data in async mode } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Layer 1 data mode." --AF ::= { nvCrfstatEntry 8 } --AF nvCrfstatCroute OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Croute record id used." --AF ::= { nvCrfstatEntry 9 } --AF nvCrfstatRouting OBJECT-TYPE --AF SYNTAX INTEGER { --AF noroute(1), --AF routing not done callednum(2), --AF route on called address callngnum(3), --AF route on calling address calledsub(4), --AF route on called sub address callngsub(5) --AF route on calling sub address } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Routing method." --AF ::= { nvCrfstatEntry 10 } --AF nvCrfstatAddr OBJECT-TYPE --AF SYNTAX DisplayString (SIZE(0..32)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF " address." --AF ::= { nvCrfstatEntry 11 } --AF nvCrfstatCause OBJECT-TYPE SYNTAX INTEGER { crfNoRoute(2), -- failure cause code (+1) crfTsAllocFail(3), crfRcscAllocFail(4), crfConAbort(5), crfConFail(6), dvNoGroup(7), dvBwRej(8), dvThrshRej(9), dvUnavail(10), frBwUnavail(11), portNoConn(12), scsaStuck(13), psReject(14), psChCrErr(15), dvNoPool(16), dvBadClass(17), dspHwUnavail(18), dspBadResrc(19), dspNoSetupI(20), dspRoRoNone(21), dspChCRspTO(22), dspChCRNoHw(23), dspChCrSyEr(24), dspChCrBitF(25), dspChCrDwlF(26), dspMsgNotPS(27), r2NoDspTs(28), r2ChCrErr(29), srcAborted(30), crfRsrcBusy(31), dspmFullLts(32), sigChCrErr(33), busy(34), noAnswer(35), tsUnavail(36), noDialtone(37), causeUnspecified(38) } ACCESS read-only STATUS mandatory DESCRIPTION "circuit connection failure cause." ::= { nvCrfstatEntry 12 } nvCrfstatRcsc0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 0." ::= { nvCrfstatEntry 13 } nvCrfstatRcsc1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 1." ::= { nvCrfstatEntry 14 } nvCrfstatRcsc2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "resource info 2." ::= { nvCrfstatEntry 15 } nvCrfstatReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..2)) ACCESS read-only STATUS obsolete DESCRIPTION "OBSOLETE - removed field." ::= { nvCrfstatEntry 16 } nvCrfstatDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), --CROUTE for incoming calls outgoing(2), --CROUTE for outgoing calls unspec (3) --CROUTE for all calls } ACCESS read-only STATUS mandatory DESCRIPTION "Direction record is for." ::= { nvCrfstatEntry 18 } -- -- rrstat file -- nvRrstat OBJECT IDENTIFIER ::= { nevadaSystem 31 } nvRrstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRrstat 1} nvRrstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRrstat 2} nvRrstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "resouce registry (system registry) status table." ::= { nvRrstat 3 } nvRrstatEntry OBJECT-TYPE SYNTAX NvRrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "rrstat record indexed by record number." INDEX { nvRrstatIndex } ::= { nvRrstatTable 1 } NvRrstatEntry ::= SEQUENCE { nvRrstatIndex INTEGER, nvRrstatPoolname DisplayString, nvRrstatClass INTEGER, nvRrstatNumbers Counter, nvRrstatConns Counter, nvRrstatMaxcalls Counter, nvRrstatNumIcalls Counter, nvRrstatNumOcalls Counter, nvRrstatNumcalls Counter, nvRrstatAvgtime Counter, nvRrstatDtreset DisplayString } nvRrstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of rrstat record." ::= { nvRrstatEntry 1 } nvRrstatPoolname OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "resource pool name." ::= { nvRrstatEntry 2 } nvRrstatClass OBJECT-TYPE SYNTAX INTEGER { protocolStack(2), -- protocol stack (+1) digitalModem(3), priCall(4), priDc(5) } ACCESS read-only STATUS mandatory DESCRIPTION "resource pool class." ::= { nvRrstatEntry 3 } nvRrstatNumbers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of resources." ::= { nvRrstatEntry 4 } nvRrstatConns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of connected resources." ::= { nvRrstatEntry 5 } nvRrstatMaxcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of connected resources." ::= { nvRrstatEntry 6 } nvRrstatNumIcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of incoming calls processed." ::= { nvRrstatEntry 7 } nvRrstatNumOcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of outgoing calls processed." ::= { nvRrstatEntry 8 } nvRrstatNumcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of calls processed." ::= { nvRrstatEntry 9 } nvRrstatAvgtime OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Average length of call in seconds." ::= { nvRrstatEntry 10 } nvRrstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvRrstatEntry 15 } -- -- modemprof -- nvModemprof OBJECT IDENTIFIER ::= {nevadaSystem 32} nvModemprofMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvModemprof 1} nvModemprofNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvModemprof 2} nvModemprofTable OBJECT-TYPE SYNTAX SEQUENCE OF NvModemprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemconf file." ::= { nvModemprof 3 } nvModemprofEntry OBJECT-TYPE SYNTAX NvModemprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemconf record." INDEX { nvModemprofIndex } ::= { nvModemprofTable 1 } NvModemprofEntry ::= SEQUENCE { nvModemprofIndex INTEGER, nvModemprofName DisplayString, nvModemprofRsrcpool DisplayString, nvModemprofDspname DisplayString, nvModemprofType INTEGER, nvModemprofEc INTEGER, nvModemprofDc INTEGER, nvModemprofMode INTEGER, nvModemprofCmpdtype INTEGER, nvModemprofTxlvl INTEGER, nvModemprofRxthresh INTEGER, nvModemprofAnston INTEGER, nvModemprofAnstondur INTEGER, nvModemprofBildly INTEGER, nvModemprofStatus INTEGER, nvModemprofFalbckchr INTEGER } nvModemprofIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of modemconf record" ::= { nvModemprofEntry 1 } nvModemprofName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Modem Prof resource config name (name)" ::= { nvModemprofEntry 2 } nvModemprofRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource pool name." ::= { nvModemprofEntry 5 } nvModemprofDspname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Device usage group name." ::= { nvModemprofEntry 6 } nvModemprofType OBJECT-TYPE SYNTAX INTEGER { modauto(1), -- V.34 by any other name v34(2), -- V.34 (19200,16800) (+1) v32bis(3), -- V.32bis (14400,12000,9600,7200,4800) v32(4), -- V.32 (9600,4800,2400) v23t75r12(5), -- V.23t75r12 (tx7500/r1200) v23t12r75(6), -- V.23t12r75 (tx1200/r7500) v22bis(7), -- V.22bis (2400) v22(8), -- V.22 (1200) v21(9), -- V.21 (0-300) b212a(10), -- Bell 212A (1200) b103(11), -- Bell 103 (0-300) pautob(12), -- Auto Mode, incl Fastconn, Bell Answer Tone pautoc(13), -- Auto Mode, incl Fastconn, CCITT Answer Tone v34bis(14), -- v.34bis (33,600 and 31,200) vpcm(15), -- V.PCM (k56) 60,000 down to 32,000 in increments of 2k v21rev(16), -- Reverse Training - V.21 up thru V.22bis => automode starting at 300. v110mod(21), v110b600(22), v110b1200(23), v110b2400(24), v110b4800(25), v110b7200(26), v110b9600(27), v110b12000(28), v110b14400(29), v110b19200(30), v110b48000(31), v110b56000(32) } ACCESS read-write STATUS mandatory DESCRIPTION "Modem modulation scheme (type) Default value is 3." ::= { nvModemprofEntry 7 } nvModemprofEc OBJECT-TYPE SYNTAX INTEGER { disable(1), -- disable all error correction (+1) v42ec(2), -- V.42 error correction mNPec(3), -- MNP Microcom Networking Protocol err correction eitherec(4), -- try v42,then try MNP,then disconnect autoec(5) -- try v42,then try MNP,then connect with no ec } ACCESS read-write STATUS mandatory DESCRIPTION "Modem error correction option." ::= { nvModemprofEntry 8 } nvModemprofDc OBJECT-TYPE SYNTAX INTEGER { disable(1), -- disable data compression (+1) enable(2) -- enable data compression } ACCESS read-write STATUS mandatory DESCRIPTION "Modem data compression option." ::= { nvModemprofEntry 9 } nvModemprofMode OBJECT-TYPE SYNTAX INTEGER { sync(3), -- synchronous data configured (+1) async(4), -- async data configured auto(8) -- will decide at call start } ACCESS read-write STATUS mandatory DESCRIPTION "Modem sync / async option." ::= { nvModemprofEntry 10 } nvModemprofCmpdtype OBJECT-TYPE SYNTAX INTEGER { mulaw(2), -- mu law (+1) alaw(3), -- a law nocmpdt(4) -- field no applicable as for V.110 } ACCESS read-write STATUS mandatory DESCRIPTION "Modem companding type." ::= { nvModemprofEntry 13 } nvModemprofTxlvl OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Transmit level (txlvl) Default value is 13." ::= { nvModemprofEntry 14 } nvModemprofRxthresh OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Modem receive threshold (rxthresh) Default value is 38." ::= { nvModemprofEntry 15 } nvModemprofAnston OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Modem generate answer (anston) tone." ::= { nvModemprofEntry 17 } nvModemprofAnstondur OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Mode answer tone (anstondur) duration." ::= { nvModemprofEntry 18 } nvModemprofBildly OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Modem wait to send answer (bildly) tone." ::= { nvModemprofEntry 19 } nvModemprofStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvModemprofEntry 20 } nvModemprofFalbckchr OBJECT-TYPE SYNTAX INTEGER (0..80) ACCESS read-write STATUS mandatory DESCRIPTION "modem autorel fallback char." ::= { nvModemprofEntry 21 } nvIfStackInfo OBJECT IDENTIFIER ::= {nevadaSystem 33} nvIfStackInfoNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIfStackInfo 1} nvIfStackInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIfStackInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "modemconf file." ::= { nvIfStackInfo 2 } nvIfStackInfoEntry OBJECT-TYPE SYNTAX NvIfStackInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IfStackInfo record." INDEX { nvIfStackInfoHigherLI, nvIfStackInfoLowerLI } ::= { nvIfStackInfoTable 1 } NvIfStackInfoEntry ::= SEQUENCE { nvIfStackInfoHigherLI INTEGER, nvIfStackInfoLowerLI INTEGER, nvIfStackInfoStatus INTEGER, nvIfStackInfoRid INTEGER } nvIfStackInfoHigherLI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "highre layer interface number." ::= {nvIfStackInfoEntry 1} nvIfStackInfoLowerLI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lower layer interface number." ::= {nvIfStackInfoEntry 2} nvIfStackInfoStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Status of the entry." ::= {nvIfStackInfoEntry 3} nvIfStackInfoRid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Record ID to get info on this" ::= {nvIfStackInfoEntry 4} -- -- dialmap file -- nvDialmap OBJECT IDENTIFIER ::= { nevadaSystem 34 } nvDialmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDialmap 1} nvDialmapNumRec OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDialmap 2} nvDialmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDialmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dialmap table." ::= { nvDialmap 3 } nvDialmapEntry OBJECT-TYPE SYNTAX NvDialmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dialmap table record." INDEX { nvDialmapIndex } ::= { nvDialmapTable 1 } NvDialmapEntry ::= SEQUENCE { nvDialmapIndex INTEGER, nvDialmapNumdelete INTEGER, nvDialmapAddprefix DisplayString, nvDialmapStatus INTEGER } nvDialmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of dialmap record." ::= { nvDialmapEntry 1 } nvDialmapNumdelete OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of digits to delete." ::= { nvDialmapEntry 2} nvDialmapAddprefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-write STATUS mandatory DESCRIPTION "Digits to add after digits deleted." ::= { nvDialmapEntry 3 } nvDialmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvDialmapEntry 10 } -- -- dspmalloc file -- nvDspmalloc OBJECT IDENTIFIER ::= { nevadaSystem 35 } nvDspmallocMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDspmalloc 1} nvDspmallocNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDspmalloc 2} nvDspmallocTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDspmallocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dspmalloc table." ::= { nvDspmalloc 3 } nvDspmallocEntry OBJECT-TYPE SYNTAX NvDspmallocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dspmalloc table record." INDEX { nvDspmallocIndex } ::= { nvDspmallocTable 1 } NvDspmallocEntry ::= SEQUENCE { nvDspmallocIndex INTEGER, nvDspmallocDsptype INTEGER, nvDspmallocWeight INTEGER, nvDspmallocStatus INTEGER } nvDspmallocIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of dspmalloc record" ::= { nvDspmallocEntry 1 } nvDspmallocDsptype OBJECT-TYPE SYNTAX INTEGER { kfModem(2), v90Modem(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of DSP - kflex or V.90." ::= { nvDspmallocEntry 2 } nvDspmallocWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allocation proportion." ::= { nvDspmallocEntry 3 } nvDspmallocStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvDspmallocEntry 10 } -- -- dialstat file -- nvDialstat OBJECT IDENTIFIER ::= { nevadaSystem 36 } nvDialstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDialstat 1} nvDialstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDialstat 2} nvDialstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDialstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dialstat table." ::= { nvDialstat 3 } nvDialstatEntry OBJECT-TYPE SYNTAX NvDialstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dialstat table record." INDEX { nvDialstatIndex } ::= { nvDialstatTable 1 } NvDialstatEntry ::= SEQUENCE { nvDialstatIndex INTEGER, nvDialstatRcscpool DisplayString, nvDialstatNcurrent INTEGER, nvDialstatNcalling INTEGER, nvDialstatTrace INTEGER, nvDialstatLastAddr DisplayString, nvDialstatLastCause INTEGER, nvDialstatLastDiag INTEGER, nvDialstatLastResponse DisplayString, nvDialstatNdialout Counter, nvDialstatNattempt Counter, nvDialstatNsucceed Counter, nvDialstatNfail Counter, nvDialstatNcircfail Counter, nvDialstatNcmderror Counter, nvDialstatNdialtone Counter, nvDialstatNbusy Counter, nvDialstatNnoRoute Counter, nvDialstatNnoModem Counter, nvDialstatNnoInput Counter, nvDialstatNinvnum Counter, nvDialstatNnoAnswer Counter, nvDialstatNmnegfail Counter, nvDialstatNconnfail Counter, nvDialstatNmiscfail Counter, nvDialstatMaxcall Counter, nvDialstatAdSucctim INTEGER, nvDialstatAdFailtim INTEGER, nvDialstatNabredial Counter } nvDialstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Dialstat record" ::= {nvDialstatEntry 1 } nvDialstatRcscpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "Resource Name." ::= { nvDialstatEntry 2 } nvDialstatNcurrent OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial-out Sessions currently occuring." ::= {nvDialstatEntry 3 } nvDialstatNcalling OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of call attempts currently occuring." ::= {nvDialstatEntry 4 } nvDialstatTrace OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), busy(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Is trace enabled?" ::= {nvDialstatEntry 5 } nvDialstatLastAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Last Called Number." ::= { nvDialstatEntry 6 } nvDialstatLastCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last ISDN cause code." ::= {nvDialstatEntry 7 } nvDialstatLastDiag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Last X.25 diagnostic." ::= {nvDialstatEntry 8 } nvDialstatLastResponse OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "Last Response." ::= { nvDialstatEntry 9 } nvDialstatNdialout OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial-out sessions." ::= {nvDialstatEntry 10 } nvDialstatNattempt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of call attempts. (May be multiple attempts per dialout request)." ::= {nvDialstatEntry 11 } nvDialstatNsucceed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful dial-out attempts." ::= {nvDialstatEntry 12 } nvDialstatNfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of failed dial-out attempts." ::= {nvDialstatEntry 13 } nvDialstatNcircfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times circuit creation failed immediately." ::= {nvDialstatEntry 14 } nvDialstatNcmderror OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails due to error in dialout string command." ::= {nvDialstatEntry 15 } nvDialstatNdialtone OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails due to no dialtone." ::= {nvDialstatEntry 16 } nvDialstatNbusy OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails due to remote busy." ::= {nvDialstatEntry 17 } nvDialstatNnoRoute OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails due to routing error." ::= {nvDialstatEntry 18 } nvDialstatNnoModem OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Fails because no modem was available." ::= {nvDialstatEntry 19 } nvDialstatNnoInput OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails because of no user input within time limit." ::= {nvDialstatEntry 20 } nvDialstatNinvnum OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails because invalid user input received." ::= {nvDialstatEntry 21 } nvDialstatNnoAnswer OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails due to no answer." ::= {nvDialstatEntry 22 } nvDialstatNmnegfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of failed modem negotiation." ::= {nvDialstatEntry 23 } nvDialstatNconnfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fails after ISDN connection for reasons other than modem negotiation failure." ::= {nvDialstatEntry 24 } nvDialstatNmiscfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of miscellaneous failures not counted elsewhere." ::= {nvDialstatEntry 25 } nvDialstatMaxcall OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number concurrently calling." ::= {nvDialstatEntry 26 } nvDialstatAdSucctim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Average time for dial-out for successful dial-out request, in units of tenths of a second." ::= {nvDialstatEntry 27 } nvDialstatAdFailtim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Average time for dial-out for filaed cases, in units of tenths of a second." ::= {nvDialstatEntry 28 } nvDialstatNabredial OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " number of aborted redials, JATE redial restriction." ::= {nvDialstatEntry 29 } -- -- frmrstat -- nvFrmrstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFrmrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: frmrstat plus slot number. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires the slot number" ::= { nevadaSystem 37 } nvFrmrstatEntry OBJECT-TYPE SYNTAX NvFrmrstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active." INDEX { nvFrmrstatSlotIndex } ::= { nvFrmrstatTable 1 } NvFrmrstatEntry ::= SEQUENCE { nvFrmrstatSlotIndex INTEGER, nvFrmrstatState INTEGER, nvFrmrstatFailCause INTEGER, nvFrmrstatResetTime DisplayString, nvFrmrstatNumFailures INTEGER, nvFrmrstatNumReloads INTEGER, nvFrmrstatTotalCalls INTEGER, nvFrmrstatCallsPresent INTEGER, nvFrmrstatNumPortUp INTEGER, nvFrmrstatNumFailUp INTEGER, nvFrmrstatNumTxFrames INTEGER, nvFrmrstatNumRxFrames INTEGER, nvFrmrstatNumTxBytes INTEGER, nvFrmrstatNumRxBytes INTEGER } nvFrmrstatSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Framer card slot number." ::= { nvFrmrstatEntry 1 } nvFrmrstatState OBJECT-TYPE SYNTAX INTEGER { free(1), dead(2), dying(3), up(4), download(6) } ACCESS read-only STATUS mandatory DESCRIPTION "State of framer card." ::= { nvFrmrstatEntry 2 } nvFrmrstatFailCause OBJECT-TYPE SYNTAX INTEGER { none(1), softfail(2), hardfail(3), download(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Reason for last failure." ::= { nvFrmrstatEntry 3 } nvFrmrstatResetTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Date and Time of last framer card reset." ::= { nvFrmrstatEntry 4 } nvFrmrstatNumFailures OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of download attempts." ::= { nvFrmrstatEntry 5 } nvFrmrstatNumReloads OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of successful reloads." ::= { nvFrmrstatEntry 6 } nvFrmrstatTotalCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of smartport calls made." ::= { nvFrmrstatEntry 7 } nvFrmrstatCallsPresent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of calls currently up." ::= { nvFrmrstatEntry 8 } nvFrmrstatNumPortUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of successful port ups." ::= { nvFrmrstatEntry 9 } nvFrmrstatNumFailUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of failed port ups." ::= { nvFrmrstatEntry 10 } nvFrmrstatNumTxFrames OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of frames transmitted." ::= { nvFrmrstatEntry 11 } nvFrmrstatNumRxFrames OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of frames received." ::= { nvFrmrstatEntry 12 } nvFrmrstatNumTxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes transmitted." ::= { nvFrmrstatEntry 13 } nvFrmrstatNumRxBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of bytes received." ::= { nvFrmrstatEntry 14 } -- -- Models / Platform types -- nvNas OBJECT IDENTIFIER ::= {nevadaModels 1} -- -- frstat file -- nvFrstat OBJECT IDENTIFIER ::= {nevadaFrameRelay 1} nvFrstatCurtime OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Minutes into current 15-minute cycle Statistic is zeroed at startup time." ::= {nvFrstat 1 } nvFrstatTxcurfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current snapshot of Tx Frames/Second Statistic is zeroed at startup time." ::= {nvFrstat 2 } nvFrstatTxavgfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Average Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time." ::= {nvFrstat 3 } nvFrstatRxcurfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Current snapshot of Rx Frames/Second Statistic is zeroed at startup time." ::= {nvFrstat 4 } nvFrstatRxavgfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Average Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time." ::= {nvFrstat 5 } nvFrstatMtxcurfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current snapshot of mapped Tx Frames/Second Statistic is zeroed at startup time." ::= {nvFrstat 6 } nvFrstatMtxavgfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Average mapped Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time." ::= {nvFrstat 7 } nvFrstatMrxcurfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Current snapshot of mapped Rx Frames/Second Statistic is zeroed at startup time." ::= {nvFrstat 8 } nvFrstatMrxavgfps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Average mapped Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time." ::= {nvFrstat 9 } nvFrstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvFrstat 10 } -- -- fristat -- nvFristat OBJECT IDENTIFIER ::= {nevadaFrameRelay 2} nvFristatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvFristat 1} nvFristatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvFristat 2} nvFristatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFristatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "fristat file." ::= {nvFristat 3} nvFristatEntry OBJECT-TYPE SYNTAX NvFristatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "fristat record." INDEX {nvFristatIndex} ::= {nvFristatTable 1 } NvFristatEntry ::= SEQUENCE { nvFristatIndex INTEGER, nvFristatPort DisplayString, nvFristatOperstate INTEGER, nvFristatLmistate INTEGER, nvFristatCurseq INTEGER, nvFristatRcvseq INTEGER, nvFristatErrorcounts Counter, nvFristatRxexceszes Counter, nvFristatRxbaddlcis Counter, nvFristatDtreset DisplayString } nvFristatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Fristat record" ::= {nvFristatEntry 1 } nvFristatPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION " Physical Port" ::= {nvFristatEntry 2 } nvFristatOperstate OBJECT-TYPE SYNTAX INTEGER { unconnected(1), -- (+1) badFriConfig(2), idle(3), setup(4), active(5) } ACCESS read-only STATUS mandatory DESCRIPTION "FRI Operational state Initial status is 0+1." ::= {nvFristatEntry 3 } nvFristatLmistate OBJECT-TYPE SYNTAX INTEGER { inactive(1), -- (+1) normal(2), error(3) } ACCESS read-only STATUS mandatory DESCRIPTION "LMI Operational state Initial status is 0+1." ::= {nvFristatEntry 4 } nvFristatCurseq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted LMI sequence number" ::= {nvFristatEntry 5 } nvFristatRcvseq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received LMI sequence number" ::= {nvFristatEntry 6 } nvFristatErrorcounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "LMI errors during recorded history Statistic is zeroed at startup time." ::= {nvFristatEntry 7 } nvFristatRxexceszes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Too Large Incoming Frames Statistic is zeroed at startup time." ::= {nvFristatEntry 8 } nvFristatRxbaddlcis OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Invalid dlci Incoming Frames Statistic is zeroed at startup time." ::= {nvFristatEntry 9 } nvFristatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvFristatEntry 10 } -- -- frvcstat file -- nvFrvcstat OBJECT IDENTIFIER ::= {nevadaFrameRelay 3} nvFrvcstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvFrvcstat 1} nvFrvcstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvFrvcstat 2} nvFrvcstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFrvcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "frvcstat file." ::= {nvFrvcstat 3} nvFrvcstatEntry OBJECT-TYPE SYNTAX NvFrvcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "frvcstat record." INDEX {nvFrvcstatIndex} ::= {nvFrvcstatTable 1 } NvFrvcstatEntry ::= SEQUENCE { nvFrvcstatIndex INTEGER, nvFrvcstatService DisplayString, nvFrvcstatServiceid DisplayString, nvFrvcstatFri INTEGER, nvFrvcstatDlci INTEGER, nvFrvcstatStatus INTEGER, nvFrvcstatTxcongstatus INTEGER, nvFrvcstatRxbufdepletion Gauge, nvFrvcstatOutputrate Gauge, nvFrvcstatInputrate Gauge, nvFrvcstatExcessdatas Counter, nvFrvcstatTxframes Counter, nvFrvcstatRxframes Counter, nvFrvcstatDrprxs Counter, nvFrvcstatDrprxdes Counter, nvFrvcstatDtreset DisplayString } nvFrvcstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Frvcstat" ::= {nvFrvcstatEntry 1 } nvFrvcstatService OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Connected Component ID " ::= {nvFrvcstatEntry 2 } nvFrvcstatServiceid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Service Instance." ::= {nvFrvcstatEntry 3 } nvFrvcstatFri OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "FRI of this PVC (FRICONF recnum)" ::= {nvFrvcstatEntry 4 } nvFrvcstatDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DLCI of this PVC" ::= {nvFrvcstatEntry 5 } nvFrvcstatStatus OBJECT-TYPE SYNTAX INTEGER { free(1), -- (+1) badPvcConfig(2), disabled(3), badDLCI(4), operDisabled(5), friFull(6), noFri(7), friDown(8), friError(9), pvcInit(10), pvcDown(11), pvcUp(12), pvcInactive(13) } ACCESS read-only STATUS mandatory DESCRIPTION "PVC Operational State Initial status is 0+1." ::= {nvFrvcstatEntry 6 } nvFrvcstatTxcongstatus OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) low(2), medium(3), high(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Transmit Congestion Status Initial status is 0+1." ::= {nvFrvcstatEntry 7 } nvFrvcstatRxbufdepletion OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Receive Buffer Depletion Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 8 } nvFrvcstatOutputrate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Output during last period (bytes) Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 9 } nvFrvcstatInputrate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Input during last period (bytes) Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 10 } nvFrvcstatExcessdatas OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Data over output limit Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 11 } nvFrvcstatTxframes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Transmitted Frame Counter Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 12 } nvFrvcstatRxframes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received Frame Counter Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 13 } nvFrvcstatDrprxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received Frames Dropped Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 14 } nvFrvcstatDrprxdes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received DE Frames Dropped Statistic is zeroed at startup time." ::= {nvFrvcstatEntry 15 } nvFrvcstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvFrvcstatEntry 16 } -- The records in this file configure Frame Relay Interfaces -- There is one record per Frame Relay Interface nvFriconf OBJECT IDENTIFIER ::= { nevadaFrameRelay 4 } nvFriconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvFriconf 1} nvFriconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvFriconf 2} nvFriconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFriconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "friconf file." ::= { nvFriconf 3 } nvFriconfEntry OBJECT-TYPE SYNTAX NvFriconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "friconf record." INDEX { nvFriconfIndex } ::= { nvFriconfTable 1 } NvFriconfEntry ::= SEQUENCE { nvFriconfIndex INTEGER, nvFriconfPort DisplayString, nvFriconfRsrcpool DisplayString, nvFriconfMaxfrmsz INTEGER, nvFriconfLmitype INTEGER, nvFriconfMode INTEGER, nvFriconfDlci INTEGER, nvFriconfnT1 INTEGER, nvFriconfnT2 INTEGER, nvFriconfnT3 INTEGER, nvFriconfnN1 INTEGER, nvFriconfnN2 INTEGER, nvFriconfnN3 INTEGER, nvFriconfnN4 INTEGER, nvFriconfnP1 INTEGER, nvFriconfStatus INTEGER } nvFriconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of friconf record" ::= { nvFriconfEntry 1 } nvFriconfPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Physical Port (port) " ::= { nvFriconfEntry 2 } nvFriconfRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource pool " ::= { nvFriconfEntry 3 } nvFriconfMaxfrmsz OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Frame Size (maxfrmsz) Default value is 140." ::= { nvFriconfEntry 6 } nvFriconfLmitype OBJECT-TYPE SYNTAX INTEGER { nolmi(1), -- No LMI (+1) go4(2), -- Group of 4 ansi(3), -- ANSI LMI itu(4) -- ITU (CCITT) LMI } ACCESS read-write STATUS mandatory DESCRIPTION "Style of LMI operation (lmitype) Default value is go4 (1+1)." ::= { nvFriconfEntry 8 } nvFriconfMode OBJECT-TYPE SYNTAX INTEGER { user(1), -- User Side (+1) net(2) -- Network Side } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of FRI Operation (mode) Default value is user (0+1)." ::= { nvFriconfEntry 9 } nvFriconfDlci OBJECT-TYPE SYNTAX INTEGER (0..1023) ACCESS read-write STATUS mandatory DESCRIPTION "LMI's DLCI (dlci) Default value is 1023." ::= { nvFriconfEntry 11 } nvFriconfnT1 OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "LMI Polling Interval (nT1) Default value is 10." ::= { nvFriconfEntry 12 } nvFriconfnT2 OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "Max Time Between Polls (nT2) Default value is 15." ::= { nvFriconfEntry 13 } nvFriconfnT3 OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "Max Polls per nN4 (nT3) Default value is 20." ::= { nvFriconfEntry 14 } nvFriconfnN1 OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "LMI Full Status Poll Frequency (nN1) Default value is 6." ::= { nvFriconfEntry 19 } nvFriconfnN2 OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "LMI Error Threshold (nN2) Default value is 2." ::= { nvFriconfEntry 20 } nvFriconfnN3 OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "LMI Error History Length (nN3) Default value is 4." ::= { nvFriconfEntry 21 } nvFriconfnN4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Max Polls Within nT3 (nN4). Default value is 5." ::= { nvFriconfEntry 22 } nvFriconfnP1 OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Max PVCs allowed FRI (nP1) Default value is 1." ::= { nvFriconfEntry 23 } nvFriconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvFriconfEntry 29 } -- The records in this file configure Frame Relay PVCs -- There is one record per Frame Relay PVC nvFrvcconf OBJECT IDENTIFIER ::= { nevadaFrameRelay 5 } nvFrvcconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvFrvcconf 1} nvFrvcconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvFrvcconf 2} nvFrvcconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFrvcconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "frvcconf file." ::= { nvFrvcconf 3 } nvFrvcconfEntry OBJECT-TYPE SYNTAX NvFrvcconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "frvcconf record." INDEX { nvFrvcconfIndex } ::= { nvFrvcconfTable 1 } NvFrvcconfEntry ::= SEQUENCE { nvFrvcconfIndex INTEGER, nvFrvcconfDlci INTEGER, nvFrvcconfFri INTEGER, nvFrvcconfMappedpvc INTEGER, nvFrvcconfEnable INTEGER, nvFrvcconfT INTEGER, nvFrvcconfBc INTEGER, nvFrvcconfBe INTEGER, nvFrvcconfN INTEGER, nvFrvcconfRxbufspac INTEGER, nvFrvcconfRxcgthres INTEGER, nvFrvcconfRxcgclear INTEGER, nvFrvcconfStatus INTEGER } nvFrvcconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of frvcconf record" ::= { nvFrvcconfEntry 1 } nvFrvcconfDlci OBJECT-TYPE SYNTAX INTEGER (0..1023) ACCESS read-write STATUS mandatory DESCRIPTION "DLCI of this PVC (dlci) " ::= { nvFrvcconfEntry 2 } nvFrvcconfFri OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "FRI of this PVC (fri) " ::= { nvFrvcconfEntry 6 } nvFrvcconfMappedpvc OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Recnum of Mapped PVC (mappedpvc) " ::= { nvFrvcconfEntry 8 } nvFrvcconfEnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- Not Enabled (+1) yes(2) -- Enabled } ACCESS read-write STATUS mandatory DESCRIPTION "Is this PVC enabled? (enable) Default value is yse (1+1)." ::= { nvFrvcconfEntry 11 } nvFrvcconfT OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Rate Monitoring Period (t) " ::= { nvFrvcconfEntry 12 } nvFrvcconfBc OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Committed Burst Size (bc) " ::= { nvFrvcconfEntry 15 } nvFrvcconfBe OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Excess Burst Size (be) " ::= { nvFrvcconfEntry 16 } nvFrvcconfN OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Incoming BECN Threshold (n) " ::= { nvFrvcconfEntry 17 } nvFrvcconfRxbufspac OBJECT-TYPE SYNTAX INTEGER (1..9400) ACCESS read-write STATUS mandatory DESCRIPTION "Receive Buffer Space (rxbufspac) Default value is 1." ::= { nvFrvcconfEntry 20 } nvFrvcconfRxcgthres OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Rcv Congestion Thrshld (rxcgthres) " ::= { nvFrvcconfEntry 21 } nvFrvcconfRxcgclear OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Rcv Cong. Clear Thrshld (rxcgclear)." ::= { nvFrvcconfEntry 22 } nvFrvcconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvFrvcconfEntry 27 } -- -- iticstat file -- nvIticstat OBJECT IDENTIFIER ::= {nevadaIti 1} nvIticstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIticstat 1} nvIticstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIticstat 2} nvIticstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIticstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticstat file." ::= {nvIticstat 3} nvIticstatEntry OBJECT-TYPE SYNTAX NvIticstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticstat record." INDEX {nvIticstatIndex} ::= {nvIticstatTable 1 } NvIticstatEntry ::= SEQUENCE { nvIticstatIndex INTEGER, nvIticstatClassname DisplayString, nvIticstatNnccs Counter, nvIticstatNnfails Counter, nvIticstatNpassfails Counter, nvIticstatCurcalls Counter, nvIticstatAvgtime --AF Counter, --AF nvIticstatMaxcalls Counter, nvIticstatNumcalls INTEGER, nvIticstatDtreset DisplayString, nvIticstatTcalls Counter, nvIticstatN300bd Counter, nvIticstatN1200bd Counter, nvIticstatN2400bd Counter, nvIticstatN9600bd Counter, nvIticstatN14400bd Counter, nvIticstatN28800bd Counter, nvIticstatFailneg Counter, nvIticstatTrmdscdat Counter, nvIticstatLoscarsu Counter, nvIticstatLoscarcip Counter, nvIticstatLoscardat Counter, nvIticstatTrmdscsu Counter, nvIticstatTrmdsccip Counter, nvIticstatNcurIncom Counter, nvIticstatNcurOutgo Counter, nvIticstatMaxIncom Counter, nvIticstatMaxOutgo Counter, nvIticstatNumIncom Counter, nvIticstatNumOutgo Counter, nvIticstatNncr Counter } nvIticstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iticstat record" ::= {nvIticstatEntry 1 } nvIticstatClassname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of class. This field identifies which class the statistics in this record pertain to." ::= {nvIticstatEntry 2 } nvIticstatNnccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of network connection commands. Total number of network originated calls to this class. Statistic is zeroed at startup time." ::= {nvIticstatEntry 3 } nvIticstatNnfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of network connection failures. Total number of network connection commands that failed. Statistic is zeroed at startup time." ::= {nvIticstatEntry 4 } nvIticstatNpassfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of password failures. Total number of password failures for this class. Statistic is zeroed at startup time." ::= {nvIticstatEntry 5 } nvIticstatCurcalls OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Current number of calls." --AF ::={nvIticstatEntry 6} --AF --AF nvIticstatAvgtime OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Average number of seconds per call." --AF ::={nvIticstatEntry 7} --AF --AF nvIticstatMaxcalls OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Maximum concurrent calls." --AF ::={nvIticstatEntry 8} --AF --AF nvIticstatNumcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of successful modem connctions." ::={nvIticstatEntry 9} nvIticstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvIticstatEntry 10 } nvIticstatTcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of hostcalls." ::={nvIticstatEntry 11 } nvIticstatN300bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "300 up to 1200 baud calls received." ::={nvIticstatEntry 12} nvIticstatN1200bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "1200 up to 2400 baud calls received." ::={nvIticstatEntry 13} nvIticstatN2400bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "2400 up to 9600 baud calls received." ::={nvIticstatEntry 14} nvIticstatN9600bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "9600 up to 14400 baud calls received." ::={nvIticstatEntry 15 } nvIticstatN14400bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "14400 up to 28800 baud calls received." ::={nvIticstatEntry 16 } nvIticstatN28800bd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "28800 baud calls and above received." ::={nvIticstatEntry 17} nvIticstatFailneg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected during modem negotiation." ::={nvIticstatEntry 18} nvIticstatTrmdscdat OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected by terminal during data transfer." ::={nvIticstatEntry 19} nvIticstatLoscarsu OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected during setup phase." ::={nvIticstatEntry 20} nvIticstatLoscarcip OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected during connection phase." ::={nvIticstatEntry 21} nvIticstatLoscardat OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected during data transfer." ::={nvIticstatEntry 22} nvIticstatTrmdscsu OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected by terminal during setup." ::={nvIticstatEntry 23} nvIticstatTrmdsccip OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls disconnected by terminal during modem negotiation." ::={nvIticstatEntry 24} nvIticstatNcurIncom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Current Incoming Calls." ::={nvIticstatEntry 25} nvIticstatNcurOutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Current Outgoing Calls." ::={nvIticstatEntry 26} nvIticstatMaxIncom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of Incoming Calls." ::={nvIticstatEntry 27} nvIticstatMaxOutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of Outgoing Calls." ::={nvIticstatEntry 28} nvIticstatNumIncom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Successful Incoming Calls." ::={nvIticstatEntry 29} nvIticstatNumOutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Successful Outgoing Calls." ::={nvIticstatEntry 30} nvIticstatNncr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of network connection commands. Count of virtual circuits initiated from ITI port." ::= {nvIticstatEntry 31 } -- -- itipstat file -- nvItipstat OBJECT IDENTIFIER ::= {nevadaIti 2} nvItipstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItipstat 1} nvItipstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItipstat 2} nvItipstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItipstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itipstat file." ::= {nvItipstat 3} nvItipstatEntry OBJECT-TYPE SYNTAX NvItipstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itipstat record." INDEX {nvItipstatIndex} ::= {nvItipstatTable 1 } NvItipstatEntry ::= SEQUENCE { nvItipstatIndex INTEGER, nvItipstatPortname DisplayString, nvItipstatReserve1 DisplayString, nvItipstatAcct DisplayString, nvItipstatClassname DisplayString, nvItipstatSrcadr DisplayString, nvItipstatDstadr DisplayString, nvItipstatTxPsze INTEGER, nvItipstatRxPsze INTEGER, nvItipstatTxWsze INTEGER, nvItipstatRxWsze INTEGER, nvItipstatTxTput INTEGER, nvItipstatRxTput INTEGER, nvItipstatCugtype INTEGER, nvItipstatCug INTEGER, nvItipstatRpoa INTEGER, nvItipstatRevf INTEGER, nvItipstatPrio INTEGER, nvItipstatFast INTEGER, nvItipstatPvc INTEGER, nvItipstatNdcode INTEGER, nvItipstatNddiag INTEGER, nvItipstatNdorigin INTEGER, nvItipstatNrcode INTEGER, nvItipstatNrdiag INTEGER, nvItipstatOrg INTEGER, nvItipstatState INTEGER, nvItipstatUserdata DisplayString, nvItipstatUsername DisplayString, nvItipstatX28type INTEGER, nvItipstatX3type INTEGER, nvItipstatReservet DisplayString, nvItipstatNtccs Counter, nvItipstatNnccs Counter, nvItipstatNnfails Counter, nvItipstatNtxpaks Counter, nvItipstatNrxpaks Counter, nvItipstatNtxresets Counter, nvItipstatNrxresets Counter, nvItipstatNctxpaks Counter, nvItipstatNcrxpaks Counter, nvItipstatNctxresets Counter, nvItipstatNcrxresets Counter, nvItipstatNinputs Counter, nvItipstatNoutputs Counter, nvItipstatParam DisplayString, nvItipstatPreparam DisplayString, nvItipstatDtreset DisplayString, nvItipstatId DisplayString, nvItipstatNtconn Counter, nvItipstatNtdc Counter, nvItipstatNncr Counter, nvItipstatNtimeout Counter } nvItipstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itipstat" ::= {nvItipstatEntry 1 } nvItipstatPortname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of port. This field identifies which port the statistics in this record pertain to." ::= {nvItipstatEntry 2 } nvItipstatReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS obsolete DESCRIPTION "OBSOLETE - removed field." ::= {nvItipstatEntry 3 } nvItipstatAcct OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "accounting id." ::= {nvItipstatEntry 4 } nvItipstatClassname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "iti class: Current user class using this port. NOTE: Order of the following fields corresponds to subset of NSCC structure. The code uses block copies for these fields and assumes the above condition is always true." ::= {nvItipstatEntry 5 } nvItipstatSrcadr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "source address: Source network address." ::= {nvItipstatEntry 6 } nvItipstatDstadr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "destination address: Destination network address." ::= {nvItipstatEntry 7 } nvItipstatTxPsze OBJECT-TYPE SYNTAX INTEGER { pktUndefined(1), -- (+1) pkt16(5), pkt32(6), pkt64(7), pkt128(8), pkt256(9), pkt512(10), pkt1024(11), pkt2048(12), pkt4096(13) } ACCESS read-only STATUS mandatory DESCRIPTION "packet size: Transmit Packet size used. " ::= {nvItipstatEntry 8 } nvItipstatRxPsze OBJECT-TYPE SYNTAX INTEGER { pktUndefined(1), -- (+1) pkt16(5), pkt32(6), pkt64(7), pkt128(8), pkt256(9), pkt512(10), pkt1024(11), pkt2048(12), pkt4096(13) } ACCESS read-only STATUS mandatory DESCRIPTION "packet size: Receive Packet size used. " ::= {nvItipstatEntry 9 } nvItipstatTxWsze OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "window size: transmit Window size used." ::= {nvItipstatEntry 10 } nvItipstatRxWsze OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "window size: receive Window size used." ::= {nvItipstatEntry 11 } nvItipstatTxTput OBJECT-TYPE SYNTAX INTEGER { tcUndefined(1), -- (+1) tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13) } ACCESS read-only STATUS mandatory DESCRIPTION "throughput class: transmit Throughput class used. " ::= {nvItipstatEntry 12 } nvItipstatRxTput OBJECT-TYPE SYNTAX INTEGER { tcUndefined(1), -- (+1) tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13) } ACCESS read-only STATUS mandatory DESCRIPTION "throughput class: receive Throughput class used. " ::= {nvItipstatEntry 13 } nvItipstatCugtype OBJECT-TYPE SYNTAX INTEGER { noCug(1), -- (+1) cug(2), cugWithOutgoingAccess(3), bilateralCug(4) } ACCESS read-only STATUS mandatory DESCRIPTION "cug type: Type of closed user group call." ::= {nvItipstatEntry 14 } nvItipstatCug OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "cug: Closed group identifier. Valid only if previous flag is true." ::= {nvItipstatEntry 15 } nvItipstatRpoa OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "rpoa: DNIC" ::= {nvItipstatEntry 16 } nvItipstatRevf OBJECT-TYPE SYNTAX INTEGER { false(1), -- (+1) true(2), busied(3), notapp(4) } ACCESS read-only STATUS mandatory DESCRIPTION "reverse charging: Flag indicating if reverse charging is being used." ::= {nvItipstatEntry 17 } nvItipstatPrio OBJECT-TYPE SYNTAX INTEGER { false(1), -- (+1) true(2), busied(3), notapp(4) } ACCESS read-only STATUS mandatory DESCRIPTION "priority call: Flag indicating if priority calling is beng used." ::= {nvItipstatEntry 18 } nvItipstatFast OBJECT-TYPE SYNTAX INTEGER { noFastSelect(1), -- (+1) fastSelect(2), fastSelectRestricted(3) } ACCESS read-only STATUS mandatory DESCRIPTION "fast select: Type of fast select." ::= {nvItipstatEntry 19 } nvItipstatPvc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "pvc code: Permanent Virtual Circuit Code." ::= {nvItipstatEntry 20 } nvItipstatNdcode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "network disconnect code. Value of the last network disconnnect code." ::= {nvItipstatEntry 21 } nvItipstatNddiag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "network diag code: Value of the last network diagnostic code." ::= {nvItipstatEntry 22 } nvItipstatNdorigin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "disconnect origin: Whether disconnect was local or remote directive." ::= {nvItipstatEntry 23 } nvItipstatNrcode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "network reset code: Value of the last network reset code." ::= {nvItipstatEntry 24 } nvItipstatNrdiag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "network reset diag: Value of the last network reset diagnostic code." ::= {nvItipstatEntry 25 } nvItipstatOrg OBJECT-TYPE SYNTAX INTEGER { false(1), -- (+1) true(2), busied(3), notapp(4) } ACCESS read-only STATUS mandatory DESCRIPTION "call originator. Flag indicating who originated the call in progress." ::= {nvItipstatEntry 26 } nvItipstatState OBJECT-TYPE SYNTAX INTEGER { idle(2), -- (+1) awaitingCommand(3), awaitingSelection(4), awaitingUserid(5), awaitingPassword(6), dataTransfer(8), invitationToClear(9), padCommandAfterEscape(10), padCommand(11), awaitingTerminalConnectResponse(12), awaitingFastSelectUserData(13), loopback(14), awaitingDiscBeforeCallBack(15), awaitingCallBack(16), awaitingDialoutUserInput(17), unused2(18), unused3(19), unused4(20), unused5(21), loginServicesControlMode(22), callReselection(23), scanLoginString(24), waitOutputDoneBeforeIdel(25), dlspcWaitCallClearFromDUI(26), escFromConnInProgress(27), waitRadiusResponseToMsg(28), waitUserInputForRadChallenge(29), connectingWaitForModemTrain(30) } ACCESS read-only STATUS mandatory DESCRIPTION "iti internal state: Internal state of the ITI interface." ::= {nvItipstatEntry 27 } nvItipstatUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "user data: User specified user data." ::= {nvItipstatEntry 28 } nvItipstatUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "iti class: Current user using this port." ::= {nvItipstatEntry 29 } nvItipstatX28type OBJECT-TYPE SYNTAX INTEGER { undefined(1), pci(2), -- (+1) ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19) } ACCESS read-only STATUS mandatory DESCRIPTION "command standard." ::= {nvItipstatEntry 30 } nvItipstatX3type OBJECT-TYPE SYNTAX INTEGER { undefined(1), pci(2), -- (+1) ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19) } ACCESS read-only STATUS mandatory DESCRIPTION "parameter standard: Current X.3 parameter standard being used." ::= {nvItipstatEntry 31 } nvItipstatReservet OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "OBSOLETE - removed field." ::= {nvItipstatEntry 32 } nvItipstatNtccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of term connection commands. Count of service requests received from the terminal. Statistic is zeroed at startup time." ::= {nvItipstatEntry 33 } nvItipstatNnccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of network connection cmds. Count of service requests received from the network. Statistic is zeroed at startup time." ::= {nvItipstatEntry 34 } nvItipstatNnfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of network connection fails. Count of network call failures. Statistic is zeroed at startup time." ::= {nvItipstatEntry 35 } nvItipstatNtxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of transmitted packets (to network). Number of packets sent on the network. Statistic is zeroed at startup time." ::= {nvItipstatEntry 36 } nvItipstatNrxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of received packets (from network). Number of packets received from the network. Statistic is zeroed at startup time." ::= {nvItipstatEntry 37 } nvItipstatNtxresets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of transmitted resets. Number of resets originated. Statistic is zeroed at startup time." ::= {nvItipstatEntry 38 } nvItipstatNrxresets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of received resets. Number of resets received from network. Statistic is zeroed at startup time." ::= {nvItipstatEntry 39 } nvItipstatNctxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of current transmitted packets (to network). Number of packets send over the network during current terminal session. Statistic is zeroed at startup time." ::= {nvItipstatEntry 40 } nvItipstatNcrxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of current received packets (from network). Number of packets received from the network during current terminal session. Statistic is zeroed at startup time." ::= {nvItipstatEntry 41 } nvItipstatNctxresets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of current transmitted resets. Number of resets originated during current terminal session. Statistic is zeroed at startup time." ::= {nvItipstatEntry 42 } nvItipstatNcrxresets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of current received resets. Number of resets received during current terminal session. Statistic is zeroed at startup time." ::= {nvItipstatEntry 43 } nvItipstatNinputs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of input characters. Statistic is zeroed at startup time." ::= {nvItipstatEntry 44 } nvItipstatNoutputs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of output characters. Statistic is zeroed at startup time." ::= {nvItipstatEntry 45 } nvItipstatParam OBJECT-TYPE SYNTAX DisplayString (SIZE (0..140)) ACCESS read-only STATUS mandatory DESCRIPTION "Copy of the current settings of the X.3 parameters (EX standard) for this port. This byte array must contain at least P_MAX + 1 bytes. " ::= {nvItipstatEntry 46 } nvItipstatPreparam OBJECT-TYPE SYNTAX DisplayString (SIZE (0..140)) ACCESS read-only STATUS mandatory DESCRIPTION " Copy of X.3 parameters that were in effect before the current call (if any) was made. These values are restored (back to param) after the call is cleared. " ::= {nvItipstatEntry 47 } nvItipstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvItipstatEntry 48 } nvItipstatId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Address of ITI control block." ::= {nvItipstatEntry 49 } nvItipstatNtconn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of terminal connections. Number of times modem successfully trained." ::= {nvItipstatEntry 50 } nvItipstatNtdc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of terminal disconnect commands. Number of time terminal disconnected." ::= {nvItipstatEntry 51 } nvItipstatNncr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of network connection responses. Count of virtual circuits initiated from ITI port." ::= {nvItipstatEntry 52 } nvItipstatNtimeout OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of disconnects caused by ITI timeout." ::= {nvItipstatEntry 53 } -- -- itiustat file -- nvItiustat OBJECT IDENTIFIER ::= {nevadaIti 5} nvItiustatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItiustat 1} nvItiustatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItiustat 2} nvItiustatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItiustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiustat file." ::= {nvItiustat 3} nvItiustatEntry OBJECT-TYPE SYNTAX NvItiustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiustat record." INDEX {nvItiustatIndex} ::= {nvItiustatTable 1 } NvItiustatEntry ::= SEQUENCE { nvItiustatIndex INTEGER, nvItiustatUsername DisplayString, nvItiustatNcalls Counter, nvItiustatNpassfails Counter, nvItiustatNcallbacks Counter, nvItiustatDuration TimeTicks, nvItiustatNtxpaks Counter, nvItiustatNrxpaks Counter, nvItiustatDtreset DisplayString } nvItiustatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itiustat record" ::= {nvItiustatEntry 1 } nvItiustatUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of user. This field identifies which user the statistics in this record pertain to." ::= {nvItiustatEntry 2 } nvItiustatNcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of calls made. Total number of calls initiated by user Statistic is zeroed at startup time." ::= {nvItiustatEntry 3 } nvItiustatNpassfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of password failures. Total number of password failures. Statistic is zeroed at startup time." ::= {nvItiustatEntry 4 } nvItiustatNcallbacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of callbacks. Total number of callbacks to this user. Statistic is zeroed at startup time." ::= {nvItiustatEntry 5 } nvItiustatDuration OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "length of time used by user. Total number of minutes of time (*100*60). Statistic is zeroed at startup time." ::= {nvItiustatEntry 6 } nvItiustatNtxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of transmitted packets (to network). Total number packets sent by this user over the network. Statistic is zeroed at startup time." ::= {nvItiustatEntry 7 } nvItiustatNrxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of received packets (from network). Total number packets received by this user over the network. Statistic is zeroed at startup time." ::= {nvItiustatEntry 8 } nvItiustatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvItiustatEntry 9 } -- -- dlspcstat file -- nvDlspcstat OBJECT IDENTIFIER ::= {nevadaIti 6} nvDlspcstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDlspcstat 1} nvDlspcstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDlspcstat 2} nvDlspcstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDlspcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlspcstat file." ::= {nvDlspcstat 3} nvDlspcstatEntry OBJECT-TYPE SYNTAX NvDlspcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlspcstat record." INDEX {nvDlspcstatIndex} ::= {nvDlspcstatTable 1 } NvDlspcstatEntry ::= SEQUENCE { nvDlspcstatIndex INTEGER, nvDlspcstatNports INTEGER, nvDlspcstatNidle INTEGER } nvDlspcstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial records." ::= {nvDlspcstatEntry 1 } nvDlspcstatNports OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial ports." ::= {nvDlspcstatEntry 2 } nvDlspcstatNidle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of idle dial ports." ::= {nvDlspcstatEntry 3 } -- -- Duistat file -- nvDuistat OBJECT IDENTIFIER ::= {nevadaIti 7} nvDuistatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDuistat 1} nvDuistatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDuistat 2} nvDuistatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDuistatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "duistat file statistics." ::= {nvDuistat 3} nvDuistatEntry OBJECT-TYPE SYNTAX NvDuistatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Duistat record." INDEX {nvDuistatIndex} ::= {nvDuistatTable 1 } NvDuistatEntry ::= SEQUENCE { nvDuistatIndex INTEGER, nvDuistatType INTEGER, nvDuistatNua DisplayString, nvDuistatState INTEGER, nvDuistatLink INTEGER, nvDuistatLcn INTEGER, nvDuistatLastcause INTEGER, nvDuistatLastdiag INTEGER, nvDuistatNmnxtcall INTEGER, nvDuistatNretries Counter, nvDuistatNrejects Counter, nvDuistatNaccepts Counter, nvDuistatNinvmsgs Counter, nvDuistatNunxmsgs Counter, nvDuistatDtreset DisplayString } nvDuistatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index" ::= {nvDuistatEntry 1 } nvDuistatType OBJECT-TYPE SYNTAX INTEGER { primary(1), -- (+1) alternate(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of DUI Circuit." ::= {nvDuistatEntry 2 } nvDuistatNua OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Last address used." ::= {nvDuistatEntry 3 } nvDuistatState OBJECT-TYPE SYNTAX INTEGER { down(1), -- (+1) up(2), calling(3) } ACCESS read-only STATUS mandatory DESCRIPTION "State of DUI Circuit." ::= {nvDuistatEntry 4 } nvDuistatLink OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Link carrying virual circuit." ::= {nvDuistatEntry 5 } nvDuistatLcn OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "LCN of virual circuit." ::= {nvDuistatEntry 6 } nvDuistatLastcause OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Last clear cause code." ::= {nvDuistatEntry 7 } nvDuistatLastdiag OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Last clear diagnostic." ::= {nvDuistatEntry 8 } nvDuistatNmnxtcall OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes until next call." ::= {nvDuistatEntry 9 } nvDuistatNretries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of retries." ::= {nvDuistatEntry 10 } nvDuistatNrejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rejects." ::= {nvDuistatEntry 11 } nvDuistatNaccepts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of accepts." ::= {nvDuistatEntry 12 } nvDuistatNinvmsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of invalid DUI messages received." ::= {nvDuistatEntry 13 } nvDuistatNunxmsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of unexpected DUI messages received." ::= {nvDuistatEntry 14 } nvDuistatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvDuistatEntry 15 } nvItiport OBJECT IDENTIFIER ::= { nevadaIti 16 } nvItiportMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItiport 1} nvItiportNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItiport 2} nvItiportTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItiportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiport file." ::= { nvItiport 3 } nvItiportEntry OBJECT-TYPE SYNTAX NvItiportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiport record." INDEX { nvItiportIndex } ::= { nvItiportTable 1 } NvItiportEntry ::= SEQUENCE { nvItiportIndex INTEGER, nvItiportName DisplayString, nvItiportEnable INTEGER, nvItiportIticlass DisplayString, nvItiportFclevel INTEGER, nvItiportMinbspace INTEGER, nvItiportMaxbspace INTEGER, nvItiportMode --AF INTEGER, --AF nvItiportRsrcpool DisplayString, nvItiportPortname DisplayString, nvItiportTimer0 INTEGER, nvItiportTimer1 INTEGER, nvItiportTimer2 INTEGER } nvItiportIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itiport file." ::= {nvItiportEntry 1 } nvItiportName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of ITI instance." ::= {nvItiportEntry 2 } nvItiportEnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- no (+1) yes(2) -- yes } ACCESS read-write STATUS mandatory DESCRIPTION "ndicates whether port is enabled." ::= {nvItiportEntry 3 } nvItiportIticlass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class of Service associated with ITI port." ::= {nvItiportEntry 5 } nvItiportRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of Resource Pool." ::= {nvItiportEntry 6 } nvItiportPortname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of physical port or Device Usage Group." ::= {nvItiportEntry 7 } nvItiportTimer1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "TID timeout." ::= { nvItiportEntry 8 } nvItiportMinbspace OBJECT-TYPE SYNTAX INTEGER (2000..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Modem Train timer." ::= { nvItiportEntry 9 } nvItiportMaxbspace OBJECT-TYPE SYNTAX INTEGER (5000..50000) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum preallocated buffer space." ::= { nvItiportEntry 10 } nvItiportFclevel OBJECT-TYPE SYNTAX INTEGER (500..5000) ACCESS read-write STATUS mandatory DESCRIPTION "Buffer space left which causes flow control." ::= { nvItiportEntry 11 } nvItiportMode OBJECT-TYPE --AF SYNTAX INTEGER{ --AF m8N1(1), --AF +1 m7E1(2), --AF m7O1(3), --AF m7M1(4), --AF m7S1(5), --AF m8G1(7), --AF mAP1(8) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Port mode" --AF ::= { nvItiportEntry 12 } --AF nvItiportTimer0 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "TID timeout." ::= { nvItiportEntry 13 } nvItiportTimer2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "TID timeout." ::= { nvItiportEntry 14 } -- -- Dportstat file -- nvDportstat OBJECT IDENTIFIER ::= {nevadaIti 8} nvDportstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDportstat 1} nvDportstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDportstat 2} nvDportstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDportstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dportstat file statistics." ::= {nvDportstat 3} nvDportstatEntry OBJECT-TYPE SYNTAX NvDportstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dportstat record." INDEX {nvDportstatIndex} ::= {nvDportstatTable 1 } NvDportstatEntry ::= SEQUENCE { nvDportstatIndex INTEGER, nvDportstatPortname DisplayString, nvDportstatSetstate INTEGER, nvDportstatIntfstate INTEGER, nvDportstatChstate INTEGER, nvDportstatDuihost INTEGER, nvDportstatDuistatus INTEGER, nvDportstatPorttype INTEGER, --AF nvDportstatDcd --AF INTEGER, --AF nvDportstatCts --AF INTEGER, nvDportstatCli DisplayString, nvDportstatResetdate DisplayString, nvDportstatUptime TimeTicks, nvDportstatDowntime TimeTicks, nvDportstatSessions Counter, nvDportstatIncalls Counter, nvDportstatOutcalls Counter, nvDportstatDtreset DisplayString } nvDportstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "a. index" ::= {nvDportstatEntry 1 } nvDportstatPortname OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) --AF used to be (0..4) ACCESS read-only STATUS mandatory DESCRIPTION "Port name" ::= {nvDportstatEntry 2 } nvDportstatSetstate OBJECT-TYPE SYNTAX INTEGER { offline(1), -- (+1) online(2), locked(3) } ACCESS read-only STATUS mandatory DESCRIPTION "State the port was last set to" ::= {nvDportstatEntry 3 } nvDportstatIntfstate OBJECT-TYPE SYNTAX INTEGER { false(1), -- (+1) true(2), busied(3), notApplicable(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Physical port state" ::= {nvDportstatEntry 4 } nvDportstatChstate OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) connectedDuiHost(2), connectingUserSelectedHost(3), escapedFromConnectionInProgress(4), connectedUserSelectedHost(5), escapedDataState(6), portDisabled(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Channel state" ::= {nvDportstatEntry 5 } nvDportstatDuihost OBJECT-TYPE SYNTAX INTEGER { primary(1), -- (+1) alternate(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of DUI host" ::= {nvDportstatEntry 6 } nvDportstatDuistatus OBJECT-TYPE SYNTAX INTEGER { ok(1), -- (+1) failed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of DUI port" ::= {nvDportstatEntry 7 } nvDportstatPorttype OBJECT-TYPE SYNTAX INTEGER { publicSwitched(2), -- (+1) directConnect(3), passwordProtectedDirect(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of port" ::= {nvDportstatEntry 8 } --AF nvDportstatDcd OBJECT-TYPE --AF SYNTAX INTEGER (0..255) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Debounced DCD state" --AF ::= {nvDportstatEntry 9 } --AF nvDportstatCts OBJECT-TYPE --AF SYNTAX INTEGER (0..255) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Debounced CTS state" --AF ::= {nvDportstatEntry 10 } nvDportstatCli OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling line identifier" ::= {nvDportstatEntry 11 } nvDportstatResetdate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Date when statistics were last reset" ::= {nvDportstatEntry 12 } nvDportstatUptime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes port active" ::= {nvDportstatEntry 13 } nvDportstatDowntime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes port idle" ::= {nvDportstatEntry 14 } nvDportstatSessions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sessions" ::= {nvDportstatEntry 15} nvDportstatIncalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming calls" ::= {nvDportstatEntry 16 } nvDportstatOutcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing calls" ::= {nvDportstatEntry 17 } nvDportstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvDportstatEntry 18 } -- ITI sessions are all associated with "users". -- An ITI "user" may represent an individual,a group of individuals, -- or a service such as a host computer port. -- -- This file contains information about ITI "users". -- This information provides for security (passwords),call restrictions, -- closed user groups,etc. -- There is one entry per defined user. -- -- =login,6,login required -- =plogin,7,login of privileged user nvIticlass OBJECT IDENTIFIER ::= { nevadaIti 9 } nvIticlassMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIticlass 1} nvIticlassNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIticlass 2} nvIticlassTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIticlassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticlass file." ::= { nvIticlass 3 } nvIticlassEntry OBJECT-TYPE SYNTAX NvIticlassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticlass record." INDEX { nvIticlassIndex } ::= { nvIticlassTable 1 } NvIticlassEntry ::= SEQUENCE { nvIticlassIndex INTEGER, nvIticlassClassname DisplayString, nvIticlassAcctsigl INTEGER, nvIticlassActonloss INTEGER, nvIticlassBannerid INTEGER, nvIticlassBreaksgnl INTEGER, nvIticlassCalmethod INTEGER, nvIticlassClasmsgid INTEGER, nvIticlassClaspaswd DisplayString, nvIticlassCmdtimout INTEGER, nvIticlassCug INTEGER, nvIticlassDatacmd INTEGER, nvIticlassDefwsze INTEGER, nvIticlassDefpsze INTEGER, nvIticlassDevtype INTEGER, nvIticlassExitcmd INTEGER, nvIticlassFastsel INTEGER, nvIticlassIchrg INTEGER, nvIticlassInactivty INTEGER, nvIticlassIncbar INTEGER, nvIticlassInitcmd INTEGER, nvIticlassMaskstrng INTEGER, nvIticlassMaxpsze INTEGER, nvIticlassMaxwsze INTEGER, nvIticlassOchrg INTEGER, nvIticlassOutbar INTEGER, nvIticlassPrefixid INTEGER, nvIticlassProfile DisplayString, nvIticlassPromptid INTEGER, nvIticlassPvcid INTEGER, nvIticlassRejectid INTEGER, nvIticlassRpoacode INTEGER, nvIticlassRpoatype INTEGER, nvIticlassSecurity INTEGER, nvIticlassTermtype INTEGER, nvIticlassX28type INTEGER, nvIticlassX3type INTEGER, nvIticlassXoffin INTEGER, nvIticlassXoffout INTEGER, nvIticlassXonin INTEGER, nvIticlassXonout INTEGER, nvIticlassTidprompt INTEGER, nvIticlassStatus INTEGER, nvIticlassEscchar INTEGER, nvIticlassInvclrcmd INTEGER, nvIticlassX29mskstr INTEGER, nvIticlassDroptimer INTEGER, nvIticlassClasmode --AF INTEGER, --AF nvIticlassDialout INTEGER, nvIticlassCallingid --AF INTEGER, nvIticlassAcctng INTEGER, nvIticlassInvclrtim INTEGER, nvIticlassComfac INTEGER } nvIticlassIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iticlass record" ::= { nvIticlassEntry 1 } nvIticlassClassname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class Name (classname) This field contains a user's name. If a default user id is not specified in the PORT record, ITI will ask the user to enter a User Name. The entered value is matched against the records in this file. " ::= { nvIticlassEntry 2 } nvIticlassAcctsigl OBJECT-TYPE SYNTAX INTEGER { none(2), -- No accounting (+1) demand(3), -- Accounting on demand on(4), -- Accounting always on dmand1(5), -- Accounting on demand (packets+segments in ones) on1(6) -- Accounting always on (packets+segments in ones) } ACCESS read-write STATUS mandatory DESCRIPTION "Accounting Service Signal (acctsigl) Default value is 2+1." ::= { nvIticlassEntry 3 } nvIticlassActonloss OBJECT-TYPE SYNTAX INTEGER { ignore(2), -- ignore data loss (+1) clear(3), -- clear call reset(4), -- reset the virtual call discon(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Action on Data Loss (actonloss) Default value is 1+1." ::= { nvIticlassEntry 4 } nvIticlassBannerid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Connect Banner Identification (bannerid) This parameter indicates the herald message that is to be send to the port upon activation. This value is an index into string storage. Default value is 0." ::= { nvIticlassEntry 5 } nvIticlassBreaksgnl OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "BREAK Character Signal Id (breaksgnl) " ::= { nvIticlassEntry 6 } nvIticlassCalmethod OBJECT-TYPE SYNTAX INTEGER { norm(2), -- Normal (+1) abrv(3), -- abbreviated only direct(4), -- hot line only pvc(5), -- permanent virtual circuit teleneta(6), -- allow abbreviated address feature of telenet special(7), -- same as telenet,but dnic from iticonf telenb(8), -- same as special,but mnemonic facility added,PDS 846 telenc(9), -- same as telenc,but abbrev calls only,PDS 846 login(10), -- pad(11), telkom(12) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Allowed Calling Method (calmethod) Parameter to control the restriction of outgoing call methods. Default value is 1+1." ::= { nvIticlassEntry 7 } nvIticlassClasmsgid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Class Info Message Id (clasmsgid) This parameter controls the facility that is used to send a greeting message to users successfully connecting to the PAD. A terminal port will send the message to the terminal while a host port will send it across the virtual call to the user. The value is an index into string storage. If the specified string contains the two consecutive characters '%s' then the first occurance of those two characters will be replaced by a string naming the port. This may be usefull when a user wishes to know exactly what the remote destination port is when the destination port is a member of a hunt group. Default value is 0." ::= { nvIticlassEntry 8 } nvIticlassClaspaswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class Password (claspaswd) This field contains the password associated with this user. When a userid and password are prompted for then the values supplied by the user must match the USERNAME and PASSWORD fields of one of the records in the nvIticlass file. If no match is made then access is denied. If this field is NULL then only the user's name is required and the supplied password is not checked. " ::= { nvIticlassEntry 9 } nvIticlassCmdtimout OBJECT-TYPE SYNTAX INTEGER (0..500) ACCESS read-write STATUS mandatory DESCRIPTION "X.28 Command Timeout (cmdtimout) Timeout value (in seconds) when waiting for user to enter a command. If the value is zero,the command timeout facility is disabled. Default value is 60." ::= { nvIticlassEntry 10 } nvIticlassCug OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Closed User Group Identifier (cug) Default value is 0." ::= { nvIticlassEntry 11 } nvIticlassDatacmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Data Command (datacmd) Default value is 0." ::= { nvIticlassEntry 12 } nvIticlassDefwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Default Window Size (defwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2." ::= { nvIticlassEntry 13 } nvIticlassDefpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11) -- 1024 bytes } ACCESS read-write STATUS mandatory DESCRIPTION "Default Packet Size (defpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1." ::= { nvIticlassEntry 14 } nvIticlassDevtype OBJECT-TYPE SYNTAX INTEGER { term(2), -- terminal interface (+1) host(3) -- host interface } ACCESS read-write STATUS mandatory DESCRIPTION "Device Type (devtype) This field is used to control ITI actions depending upon whether the port is connected to a host or terminal. For example,a terminal interface will recognize Break,while a host interface may have to generate one. Default value is 1+1." ::= { nvIticlassEntry 15 } nvIticlassExitcmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Exit Command (exitcmd) Default value is 0." ::= { nvIticlassEntry 16 } nvIticlassFastsel OBJECT-TYPE SYNTAX INTEGER { none(2), -- No fast selects allowed,in or out (+1) inallow(3), -- incomming fast select allowed outallow(4), -- outgoing fast select allowed allowed(5) -- allowed for both incomming and outgoing } ACCESS read-write STATUS mandatory DESCRIPTION "Fast Select Calling (fastsel) This field determines whether fast select calls may be placed or received Default value is 4+1." ::= { nvIticlassEntry 17 } nvIticlassIchrg OBJECT-TYPE SYNTAX INTEGER { iall(2), -- accept normal and reverse (+1) inorm(3), -- accept normal irev(4) -- accept reverse charging } ACCESS read-write STATUS mandatory DESCRIPTION "Incoming Charging Restriction (ichrg) This field controls the incoming charging options allowed for this session. Normally used on a host interface. Default value is 1+1." ::= { nvIticlassEntry 18 } nvIticlassInactivty OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Data Mode Inactivity Timeout (inactivty) Timeout value (in minutes) when waiting for data transfer after call has been connected. If set to zero then no timeout occurs. Default value is 0." ::= { nvIticlassEntry 19 } nvIticlassIncbar OBJECT-TYPE SYNTAX INTEGER { inbar(2), -- bar incoming calls inallow(3), -- allow incoming calls (+1) inx28(4) -- incoming calls accepted in X28 mode } ACCESS read-write STATUS mandatory DESCRIPTION "Incoming Call Restriction (incbar) This field is used to bar specified incoming calls. Normally used on a host interface. Default value is 2+1." ::= { nvIticlassEntry 20 } nvIticlassInitcmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Initial Automatic Command Id (initcmd) Default value is 0." ::= { nvIticlassEntry 21 } nvIticlassMaskstrng OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "string containing echo mask sequence Default value is 0. string MUST be defined BEFORE it can be referenced in this field." ::= { nvIticlassEntry 22 } nvIticlassMaxpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11) -- 1024 bytes } ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Packet Size (maxpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1." ::= { nvIticlassEntry 23 } nvIticlassMaxwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Window Size (maxwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2." ::= { nvIticlassEntry 24 } nvIticlassOchrg OBJECT-TYPE SYNTAX INTEGER { oall(2), -- normal and reverse charging are allowed (+1) onorm(3), -- normal charging only orev(4) -- reverse charging only } ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Charging Restriction (ochrg) This field controls the outgoing charging options permitted during this session. Normally used on a terminal interface. Default value is 1+1." ::= { nvIticlassEntry 25 } nvIticlassOutbar OBJECT-TYPE SYNTAX INTEGER { outone(2), -- allow only one outgoing call per physical connection outbar(3), -- bar outgoing calls outallow(4) -- allow outgoing calls (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing Call Restriction (outbar) This field is used to bar specified outgoing calls. Normally used on a terminal interface. Default value is 3+1." ::= { nvIticlassEntry 26 } nvIticlassPrefixid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Service Signal Prefix Id (prefixid) This parameter indicates the prefix string that is prefixed to all replies from ITI. This value is an index into string storage. Default value is 0." ::= { nvIticlassEntry 27 } nvIticlassProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Initial X.3 Parameter Profile (profile) This field specifies which X.3 parameter profile is to be used for the session. The terminal parameter table is initialized with the specified values. Users are free to change their own parameters. Whenever a session is terminated,via a timeout,a broken connection or a cleared call,the X.3 profile is reloaded for the user when the Network Processor is next accessed. This facility is used by both terminal and host interfaces to set up initial parameters. This field is an index into the ITIPROF file. " ::= { nvIticlassEntry 28 } nvIticlassPromptid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "X.28 Prompt Identification (promptid) This parameter indicates the prompt to be used to solicit a user response. This value is an index into string storage. Default value is 0." ::= { nvIticlassEntry 29 } nvIticlassPvcid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "PVC Identifier (pvcid) This field is used to select a network provided permanent virtual circuit for the session. " ::= { nvIticlassEntry 30 } nvIticlassRejectid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Reject Service Message Id (rejectid) This field controls the facility that is used to send a service refusal message to the user and to disconnect the call. An example of use would be on a host pad when the host is down. A terminal port will send the message to the terminal and clear the physical connection. A host port will send the message across the virtual call to the user, and follow it by an invitation to clear. The value is an index into string storage. Default value is 0." ::= { nvIticlassEntry 31 } nvIticlassRpoacode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "RPOA Code (rpoacode) Default value is 0." ::= { nvIticlassEntry 32 } nvIticlassRpoatype OBJECT-TYPE SYNTAX INTEGER { none(2), -- No RPOA allowed (+1) file(3), -- restricted to choices from RPOA file restrict(4) -- restricted to RPOA in rpoacode field } ACCESS read-write STATUS mandatory DESCRIPTION "RPOA Type (rpoatype) Default value is 2+1." ::= { nvIticlassEntry 33 } nvIticlassSecurity OBJECT-TYPE SYNTAX INTEGER { none(2), -- no security (+1) class(3), -- class password required user(4), -- user password required callback(5), -- user password plus disconnect followed by dial back nui(6), -- NUI facility required for each call radius(7), -- use RADIUS to authenticate usrnui(8) -- lookup NUI in ITIUSER file for ROSNET, PDS 21096 } ACCESS read-write STATUS mandatory DESCRIPTION "Access Method (security) Default value is 1+1." ::= { nvIticlassEntry 34 } nvIticlassTermtype OBJECT-TYPE SYNTAX INTEGER { normal(2), -- normal (+1) apacs(3), cdapacs(4), cdx28(5), epapacs(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Terminal Type (termtype) Default value is 1+1." ::= { nvIticlassEntry 35 } nvIticlassX28type OBJECT-TYPE SYNTAX INTEGER { pci(2), -- (+1) c76(3), -- (+1) c80(4), -- (+1) c84(5), -- (+1) telenet(6), -- (+1) datapac(7), -- (+1) micom(8), -- (+1) dynapac(9), -- (+1) telepac(10), -- (+1) amdahl(11), -- (+1) telematics(12), -- (+1) hughes(13), -- (+1) otc(14), -- (+1) consat(15), -- (+1) dlspc (16), -- (+1) pos(17), dcall(18), pacnet(19) } ACCESS read-write STATUS mandatory DESCRIPTION "X.28 Command Set (x28type) Default value is 1+1." ::= { nvIticlassEntry 36 } nvIticlassX3type OBJECT-TYPE SYNTAX INTEGER { pci(2), -- (+1) ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), --AF dlspc(16), --AF pos(17), dcall(18), pacnet(19) } ACCESS read-write STATUS mandatory DESCRIPTION "X.3 Parameter Profile Type (x3type) Many implementations of X.3 may be found in today's public data networks. A parameter on one network may mean something different on another one. Or the allowable values may be different. This field selects which parameter standard is to be used in the X.28 (user interface) and X.29 (remote computer) interfaces. It is important that a user know and conform to the parameter standard being used by a remote PAD. Otherwise commands sent from the remote PAD to set local parameters may not be interpreted properly. Default value is 1+1." ::= { nvIticlassEntry 37 } nvIticlassXoffin OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Input XOFF Character (xoffin) Second user selectable XOFF charcter. This character functions in an input only capacity and is not output by the PAD as an XOFF chaacter. Default value is 19." ::= { nvIticlassEntry 38 } nvIticlassXoffout OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Output XOFF Character (xoffout) User selectable XOFF character. Default value is 19." ::= { nvIticlassEntry 39 } nvIticlassXonin OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Input XON Character (xonin) Second user selectable XON charcter. This character functions in an input only capacity and is not output by the PAD as an XON character. Default value is 17." ::= { nvIticlassEntry 40 } nvIticlassXonout OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Output XON Character (xonout) User selectable XON character. Default value is 17." ::= { nvIticlassEntry 41 } nvIticlassTidprompt OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvIticlassEntry 42 } nvIticlassStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIticlassEntry 43 } nvIticlassEscchar OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "escape character use default is 0." ::= { nvIticlassEntry 44 } nvIticlassInvclrcmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "clear Command (initcmd) Default value is 0." ::= { nvIticlassEntry 45 } nvIticlassX29mskstr OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvIticlassEntry 46 } nvIticlassDroptimer OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " length of time before disconnecting a call default 0" ::= { nvIticlassEntry 47 } nvIticlassClasmode OBJECT-TYPE --AF SYNTAX INTEGER { --AF m8N1(1), --AF m7E1(2), --AF m7O1(3), --AF m7M1(4), --AF m7S1(5), --AF m8G1(7), --AF mAP1(8), --AF unused(16) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Padding." --AF ::= { nvIticlassEntry 48 } --AF nvIticlassDialout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " dial-out string" ::= { nvIticlassEntry 49 } nvIticlassCallingid OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(2), --AF userdata(3) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "What to do with call id." --AF ::= { nvIticlassEntry 50 } --AF nvIticlassAcctng OBJECT-TYPE SYNTAX INTEGER { noacct(1), usage(2), billng(3), both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Accounting" ::= { nvIticlassEntry 51 } nvIticlassInvclrtim OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Timeout for Invitation to Clear" ::= { nvIticlassEntry 52 } nvIticlassComfac OBJECT-TYPE SYNTAX INTEGER { lcfac(1), ucfac(2), lcnofac(3), ucnofac(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Lower or Upper case service signals. lcfac = lower case with fac ucfac = upper case with fac lcnofac = lower case with no fac ucnofac = upper case no fac." ::= { nvIticlassEntry 53 } -- File contains pre-defined commands for users. -- -- An ITI user may use the "dir" command to display these pre-defined -- commands. nvIticmd OBJECT IDENTIFIER ::= { nevadaIti 10 } nvIticmdMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIticmd 1} nvIticmdNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIticmd 2} nvIticmdTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIticmdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticmd file." ::= { nvIticmd 3 } nvIticmdEntry OBJECT-TYPE SYNTAX NvIticmdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticmd record." INDEX { nvIticmdIndex } ::= { nvIticmdTable 1 } NvIticmdEntry ::= SEQUENCE { nvIticmdIndex INTEGER, nvIticmdCommand DisplayString, nvIticmdClass DisplayString, nvIticmdStringid INTEGER, nvIticmdStatus INTEGER } nvIticmdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iticmd record" ::= { nvIticmdEntry 1 } nvIticmdCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Command Mnemonic (command) Command name,this string is entered by the user and is matched against entries in this file. If successful,the matched string is taken as user input and processed. " ::= { nvIticmdEntry 2 } nvIticmdClass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class of Service (class) Name of class that owns command. " ::= { nvIticmdEntry 3 } nvIticmdStringid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Full Command Name Id (stringid) Index into string storage for replacement value. " ::= { nvIticmdEntry 4 } nvIticmdStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvIticmdEntry 5 } nvIticonf OBJECT IDENTIFIER ::= { nevadaIti 11 } nvIticonfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIticonf 1} nvIticonfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIticonf 2} nvIticonfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIticonfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticonf file." ::= { nvIticonf 3 } nvIticonfEntry OBJECT-TYPE SYNTAX NvIticonfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iticonf record." INDEX { nvIticonfIndex } ::= { nvIticonfTable 1 } NvIticonfEntry ::= SEQUENCE { nvIticonfIndex INTEGER, nvIticonfNumcopy INTEGER, nvIticonfBroadcast INTEGER, nvIticonfItiswitch INTEGER, nvIticonfPadaddr DisplayString, nvIticonfDnic INTEGER, nvIticonfConfigstr INTEGER, nvIticonfValserver INTEGER, nvIticonfV120p11 INTEGER } nvIticonfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iticonf record" ::= { nvIticonfEntry 1 } nvIticonfNumcopy OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "Number of Simultaneous Copies (numcopy) This field specifies how many ITI ports may be copying network data at one time. Default value is 4." ::= { nvIticonfEntry 2 } nvIticonfBroadcast OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast Message Id (broadcast) This field identifies a string which is to be broadcast to a port following a service request but before security checking. Replacing the nvIticonf record will cause the message to be broadcast to all active iti ports that have service signals enabled. " ::= { nvIticonfEntry 3 } nvIticonfItiswitch OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "ITI Switch (itiswitch) This field will be used to tell NBUS whether outgoing calls can be looped back (ITI to ITI calls allowed) Default value is ysr (1+1)." ::= { nvIticonfEntry 4 } nvIticonfPadaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-write STATUS mandatory DESCRIPTION "PAD Address Field (padaddr) " ::= { nvIticonfEntry 5 } nvIticonfDnic OBJECT-TYPE SYNTAX INTEGER (1000..9999) ACCESS read-write STATUS mandatory DESCRIPTION "Data Network Identification Code (dnic) DNIC number when calmethod=special in nvIticlass file. " ::= { nvIticonfEntry 6 } nvIticonfConfigstr OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "CONSAT facility mapping string." ::= { nvIticonfEntry 7 } nvIticonfValserver OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "address of validation server Default value is 0." ::= { nvIticonfEntry 8 } nvIticonfV120p11 OBJECT-TYPE SYNTAX INTEGER{ k64k(1), urate(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 64k 1, p11 for v.120 set for 64000 urate 2, p11 for v.120 from user rate in ISDN" ::= { nvIticonfEntry 10 } -- This file contains information that is used by ITI -- to map network-addresses and call user data to -- local ITI "users". These normally represent hunt-groups. -- -- The network address and user data stored in the itihunt file -- are patterns that allow the following options: -- 1. xxxxxx - arbitrary alpha/numeric data (numeric for address) -- 2. *xxx - match exactly the last 3 characters,allow any -- number of preceeding characters (0 or more). -- 3. xxxx* - match exactly the first four characters,any number of -- trailing ones (0 or more). -- 4. * - match any thing. -- 5. xx%xx - match exactly the first two characters,arbitrary -- third character,and exact last two characters. -- -- The best match is defined as the field with the most number of -- exact matches with the stored patterns. This means that * is the -- last to be matched (catch all). -- -- In mapping,the best match of the network address is taken first, -- and within this,the best match for user data. nvItimap OBJECT IDENTIFIER ::= { nevadaIti 12 } nvItimapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItimap 1} nvItimapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItimap 2} nvItimapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itimap file." ::= { nvItimap 3 } nvItimapEntry OBJECT-TYPE SYNTAX NvItimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itimap record." INDEX { nvItimapIndex } ::= { nvItimapTable 1 } NvItimapEntry ::= SEQUENCE { nvItimapIndex INTEGER, nvItimapNetaddr DisplayString, nvItimapUserdata DisplayString, nvItimapClass DisplayString, nvItimapStatus INTEGER } nvItimapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itimap record" ::= { nvItimapEntry 1 } nvItimapNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Network X.121 Address (netaddr) This field contains the pattern against which the incoming network address is matched. " ::= { nvItimapEntry 2 } nvItimapUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "User Data (userdata) This field contains the pattern against which the associated call user data is matched. " ::= { nvItimapEntry 3 } nvItimapClass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class of Port Assignment (class) This field indicates which ITI 'user' is associated with the network address and call user data. If the PORT field in this record is NULL then the actual port is located by processing the itihunt file. " ::= { nvItimapEntry 4 } nvItimapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvItimapEntry 5 } -- -- The following parameters are taken from CCITT Recommendation X.3: Packet -- Assembly/Disassembly (PAD) Facility in a Public Data Network. In supporting -- a particular user port,the operation of a PAD is controlled by the current -- X.3 parameters,set or selected for that port. When initializing a session -- between the PAD and a terminal or a host, -- the initial value of each PAD parameter is set according to a pre-configured -- profile. The terminal user may subsequently alter the parameters. -- -- The ITI "prof" command will search this file using a profile name as -- a key. nvItiprof OBJECT IDENTIFIER ::= { nevadaIti 13 } nvItiprofMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItiprof 1} nvItiprofNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItiprof 2} nvItiprofTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItiprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiprof file." ::= { nvItiprof 3 } nvItiprofEntry OBJECT-TYPE SYNTAX NvItiprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiprof record." INDEX { nvItiprofIndex } ::= { nvItiprofTable 1 } NvItiprofEntry ::= SEQUENCE { nvItiprofIndex INTEGER, nvItiprofName DisplayString, nvItiprofP1 INTEGER, nvItiprofP2 INTEGER, nvItiprofP3 INTEGER, nvItiprofP4 INTEGER, nvItiprofP5 INTEGER, nvItiprofP6 INTEGER, nvItiprofP7 INTEGER, nvItiprofP8 INTEGER, nvItiprofP9 INTEGER, nvItiprofP10 INTEGER, nvItiprofP11 INTEGER, nvItiprofP12 INTEGER, nvItiprofP13 INTEGER, nvItiprofP14 INTEGER, nvItiprofP15 INTEGER, nvItiprofP16 INTEGER, nvItiprofP17 INTEGER, nvItiprofP18 INTEGER, nvItiprofP19 INTEGER, nvItiprofP20 INTEGER, nvItiprofP21 INTEGER, nvItiprofP22 INTEGER, nvItiprofP23 INTEGER, nvItiprofP24 INTEGER, nvItiprofP25 INTEGER, nvItiprofP26 INTEGER, nvItiprofP27 INTEGER, nvItiprofP28 INTEGER, nvItiprofP29 INTEGER, nvItiprofP30 INTEGER, nvItiprofP31 INTEGER, nvItiprofP32 INTEGER, nvItiprofP33 INTEGER, nvItiprofP34 INTEGER, nvItiprofP35 INTEGER, nvItiprofStatus INTEGER } nvItiprofIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itiprof record" ::= { nvItiprofEntry 1 } nvItiprofName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Profile Name (name) Name of profile. Used by ITI 'prof' command to locate specified record. " ::= { nvItiprofEntry 2 } nvItiprofP1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "PAD Recall Character (p1) This parameter indicates whether or not the transmission of a DLE character (ASCII value of 16.) from the terminal to the PAD is recognized as an escape from the data transfer state. If so,transmission of DLE will cause the virtual call to be suspended, allowing the terminal user to send commands to the PAD. (0) = No escape allowed (1) = Escape allowed Default value is 1." ::= { nvItiprofEntry 3 } nvItiprofP2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Echo Enable/Disable (p2) This parameter indicates to the PAD whether or not the terminal input data is to be echoed. If so,characters typed in from the terminal keyboard will be transmitted back to the terminal as well as being interpreted by the PAD. Transmission costs can be reduced by having the PAD echo characters rather than having a remote host doing the echoing. (0) = No echo (1) = Echo Default value is 1." ::= { nvItiprofEntry 4 } nvItiprofP3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Packet Forwarding Characters (p3) This parameter indicates to the PAD the set of terminal generated characters that will cause data to be forwarded to the destination. When a data forwarding signal is received then all buffered data is assembled into a packet and sent to the destination. (0) = No signals (2) = CR (6) = CR,ESC,BEL,ENQ,ACK (18) = CR,EOT,ETX (126) = all control characters (ASCII values from 1. to 31.) and DEL Default value is 2." ::= { nvItiprofEntry 5 } nvItiprofP4 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Forwarding Idle Timer (p4) This parameter indicates to the PAD whether data forwarding is to be based on timeouts. If so,then the value of the parameter specifies the time limit imposed on the buffering of data characters. Each received data character will reset the timer until eventually a pause in the character stream will allow the timer to expire and all buffered data will be forwarded. (0) = No timer (1-255) = Indicates the value of the delay in twentieths of a second. Default value is 0." ::= { nvItiprofEntry 6 } nvItiprofP5 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Device Flow Control (p5) This parameter indicates whether the terminal will respond to flow control. If so,then this will allow the PAD to stop (by sending an XOFF character) and start (by sending an XON character) transmission from the terminal so that the PAD can pace the terminal. Flow control using modem signals is not supported. (0) = No auxiliary device control (1) = xon/xoff flow control (data transfer) Default value is 1." ::= { nvItiprofEntry 7 } nvItiprofP6 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Service Signal Control (p6) This parameter indicates to the PAD whether or not network generated messages are to be transmitted to the terminal. (0) = No messages sent (1) = Send service messages (4) = Send prompts only Default value is 5." ::= { nvItiprofEntry 8 } nvItiprofP7 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Device BREAK Action (p7) This parameter is used to indicate how the PAD should process a BREAK signal that is received from the terminal while the terminal is in data transfer state. (0) = Nothing (1) = Send interrupt (2) = Send reset (8) = Escape from data state (21) = Discard output,send interrupt and indication of break Default value is 21." ::= { nvItiprofEntry 9 } nvItiprofP8 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Output Discard (p8) This parameter is used in conjunction with Parameter 7. Depending upon the BREAK procedure selected,this parameter may be set by the PAD when the terminal user requests that terminal data be discarded. This parameter must then be reset by the destination to allow normal delivery. The PAD will discard all packets destined for the terminal from the time the PAD sets this parameter (ie. BREAK) and the time the parameter is reset by the destination. This feature can be used,for example,to allow users to terminate lengthy outputs to terminals by pressing BREAK. (0) = Normal delivery (1) = Discard output Default value is 0." ::= { nvItiprofEntry 10 } nvItiprofP9 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Carriage Return Padding (p9) This parameter specifies the number of padding characters to be inserted by the PAD following a carriage return transmitted to the terminal. This would allow mechanical actions (such as type-ball returns) to be completed before more data is to be output. (0) = No padding (1-255) = Number of pads to be inserted Default value is 4." ::= { nvItiprofEntry 11 } nvItiprofP10 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Line Length (p10) This parameter indicates the maximum number of printable characters that can be displayed on the terminal before the PAD must be sent a format effector (ie. CR LF). This causes data to be output on the next line on the terminal. (0) = No line folding (1-255) = Number of characters per line Default value is 80." ::= { nvItiprofEntry 12 } nvItiprofP11 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Transmission Speed (Read Only) (p11) This parameter is set by the PAD as the result of transmission speed detection if the terminal access is an autobaud port. When a port with fixed speed is used,this parameter is set during PAD configuration,based on the pre-configured value. (0) = 110 bps (1) = 134.5 bps (2) = 300 bps (3) = 1200 bps (4) = 600 bps (5) = 75 bps (6) = 150 bps (7) = 1800 bps (8) = 200 bps (9) = 100 bps (10) = 50 bps (11) = 75/1200 (12) = 2400 (13) = 4800 (14) = 9600 " ::= { nvItiprofEntry 13 } nvItiprofP12 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "PAD Flow Control (p12) This parameter enables the terminal to indicate to the PAD that the terminal cannot receive any more data. When this parameter is set to 1,the terminal user can request that the PAD stop sending data by transmitting a DC3 character. The PAD then suspends transmission of data until a DC1 character is received. This feature allows a display terminal user to indicate when the PAD should suspend the scrolling of terminal output,so that it can be viewed. Then the output can be restarted. (0) = No flow control (1) = Flow control Default value is 1." ::= { nvItiprofEntry 14 } nvItiprofP13 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Line Feed Insertion (p13) This parameter specifies when the PAD should insert Linefeed upon receipt of carriage return from the terminal or destination. As the parameter value is bit-encoded,any combination is permissible. (0) = No linefeed insertion (1) = Insert after carriage return to terminal (2) = Insert in data stream after carriage return from terminal (4) = Insert linefeed after echo of carriage return to terminal Default value is 4." ::= { nvItiprofEntry 15 } nvItiprofP14 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Line Feed Padding (p14) This parameter provides for the automatic insertion by the PAD of padding characters or time delays after occurrence of a linefeed character. (0) = No padding (1-255) = Padding after linefeed Default value is 0." ::= { nvItiprofEntry 16 } nvItiprofP15 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Editing Enable/Disable (p15) This parameter sets character delete,line delete,and line display actions in the data transfer state. Editing is always available in the command state. (0) = No editing (1) = Editing enabled (data state) Default value is 1." ::= { nvItiprofEntry 17 } nvItiprofP16 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Character Delete Character (p16) This parameter specifies the ASCII character to be used as a 'character delete' character for local editing by the PAD. (0) = No delete character Default value is 8." ::= { nvItiprofEntry 18 } nvItiprofP17 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Line Delete Character (p17) This parameter specifies the ASCII character to be used as a 'line delete' character for local editing by the PAD. (0) = No line delete Default value is 24." ::= { nvItiprofEntry 19 } nvItiprofP18 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Line Display Character (p18) This parameter specifies the ASCII character to be used as a 'line redisplay' character for local editing by the PAD. (0) = No line redisplay. Default value is 18." ::= { nvItiprofEntry 20 } nvItiprofP19 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Service Signal Editing (p19) (0) = None (1) = Printing terminal edit (2) = CRT terminal editing Default value is 2." ::= { nvItiprofEntry 21 } nvItiprofP20 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Echo Mask (p20) This parameter specifies which characters are not echoed to the device (when p2 is set to 1). (0) = No mask (echo all) (1) = No echo CR (2) = No echo LF (4) = No echo VT,HT,FF (8) = No echo BEL,BS (16) = No echo ESC,ENQ (32) = No echo ACK,NAK,STX,SOH,EOT,ETX,ETB (64) = No echo of parameters 16,17,18 (128) = No echo of control characters not named above Default value is 6." ::= { nvItiprofEntry 22 } nvItiprofP21 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Parity Treatment (p21) This parameter specifies whether or not the PAD should detect,check and generate parity. (0) = No parity detection or generation (1) = Parity checking and PAD handles any parity errors (2) = Parity generation,PAD sets the parity bit for each ASCII character. Default value is 3." ::= { nvItiprofEntry 23 } nvItiprofP22 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Page Wait (p22) This parameter specifies the number of lines (line-feeds) that will be sent to the attached device before output is halted. Output is subsequently resumed after an XON character or any packetizing character is received from the device. (0) = No page wait enabled (1-255) = Number of lines output before page wait condition Default value is 23." ::= { nvItiprofEntry 24 } nvItiprofP23 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "First Extra Forwarding Character (p23) This parameter allow the definition of an additional data forwarding signal. This signal is in addition to those specified by parameters 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0." ::= { nvItiprofEntry 25 } nvItiprofP24 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Second Extra Forwarding Character (p24) This parameter allows the definition of an additional data forwarding signal. This signal is in addition to those characters specified by parameter 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0." ::= { nvItiprofEntry 26 } nvItiprofP25 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Output Pending Timer (p25) This parameter specifies the length of time,if any,that terminal output will be blocked by terminal input. (0) = No output pending timer. That is,output is not blocked by input (such as in half-duplex transmission). (1-255) = Delay in seconds Default value is 1." ::= { nvItiprofEntry 27 } nvItiprofP26 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Interval Timer (p26) Maximum time,in 1/20 seconds,between transmission of packets. Default value is 0." ::= { nvItiprofEntry 28 } nvItiprofP27 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Horizontal Tab Padding (p27) Number of nulls to output after a TAB. Default value is 0." ::= { nvItiprofEntry 29 } nvItiprofP28 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "XON Character to PAD (p28) Default value is 0." ::= { nvItiprofEntry 30 } nvItiprofP29 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "XOFF Character to PAD (p29) Default value is 0." ::= { nvItiprofEntry 31 } nvItiprofP30 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "XON Character to Device (p30) Default value is 0." ::= { nvItiprofEntry 32 } nvItiprofP31 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "XOFF Character to Device (p31) Default value is 0." ::= { nvItiprofEntry 33 } nvItiprofP32 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Packet Forward on Character Count (p32) Default value is 0." ::= { nvItiprofEntry 34 } nvItiprofP33 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "CONSAT parameter 101 (TAB echo) Default value is 0." ::= { nvItiprofEntry 35 } nvItiprofP34 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "CONSAT parameter 102 (TAB expansion) Default value is 0." ::= { nvItiprofEntry 36 } nvItiprofP35 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "CONSAT parameter 103 (BREAK key) Default value is 0." ::= { nvItiprofEntry 37 } nvItiprofStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvItiprofEntry 38 } -- -- nvItirpoa OBJECT IDENTIFIER ::= { nevadaIti 14 } nvItirpoaMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItirpoa 1} nvItirpoaNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItirpoa 2} nvItirpoaTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItirpoaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itirpoa file." ::= { nvItirpoa 3 } nvItirpoaEntry OBJECT-TYPE SYNTAX NvItirpoaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itirpoa record." INDEX { nvItirpoaIndex } ::= { nvItirpoaTable 1 } NvItirpoaEntry ::= SEQUENCE { nvItirpoaIndex INTEGER, nvItirpoaCode INTEGER, nvItirpoaCarrier DisplayString, nvItirpoaStatus INTEGER } nvItirpoaIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itirpoa record" ::= { nvItirpoaEntry 1 } nvItirpoaCode OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "RPOA Code (code) " ::= { nvItirpoaEntry 2 } nvItirpoaCarrier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "RPOA Name (carrier) " ::= { nvItirpoaEntry 3 } nvItirpoaStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvItirpoaEntry 4 } nvItiuser OBJECT IDENTIFIER ::= { nevadaIti 15 } nvItiuserMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvItiuser 1} nvItiuserNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvItiuser 2} nvItiuserTable OBJECT-TYPE SYNTAX SEQUENCE OF NvItiuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiprof file." ::= { nvItiuser 3 } nvItiuserEntry OBJECT-TYPE SYNTAX NvItiuserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "itiuser record." INDEX { nvItiuserIndex } ::= { nvItiuserTable 1 } NvItiuserEntry ::= SEQUENCE { nvItiuserIndex INTEGER, nvItiuserUsername DisplayString, nvItiuserCallback INTEGER, nvItiuserClrestrct INTEGER, nvItiuserInitcmd INTEGER, nvItiuserUserclass DisplayString, nvItiuserUserpaswd DisplayString, nvItiuserNumber DisplayString, nvItiuserStatus INTEGER } nvItiuserIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of itiuser record" ::= { nvItiuserEntry 1 } nvItiuserUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "User Name (username) " ::= { nvItiuserEntry 2 } nvItiuserCallback OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "User Callback Number Id (callback) Default value is 0." ::= { nvItiuserEntry 3 } nvItiuserClrestrct OBJECT-TYPE SYNTAX INTEGER { ignore(2), -- no security (+1) select(3), -- class password required restrict(4) -- user password required } ACCESS read-write STATUS mandatory DESCRIPTION "Class Restriction (clrestrct) Default value is 1+1." ::= { nvItiuserEntry 4 } nvItiuserInitcmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Initial Automatic Command Id (initcmd) Default value is 0." ::= { nvItiuserEntry 5 } nvItiuserUserclass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Class Assignment (userclass) " ::= { nvItiuserEntry 6 } nvItiuserUserpaswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "User Password (userpaswd) " ::= { nvItiuserEntry 7 } nvItiuserStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvItiuserEntry 8 } nvItiuserNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Call back number" ::= { nvItiuserEntry 9 } -- -- duiconf -- nvDuiconf OBJECT IDENTIFIER ::= { nevadaIti 17 } nvDuiconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDuiconf 1} nvDuiconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDuiconf 2} nvDuiconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDuiconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "duiconf file." ::= { nvDuiconf 3 } nvDuiconfEntry OBJECT-TYPE SYNTAX NvDuiconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "duiconf record." INDEX { nvDuiconfIndex } ::= { nvDuiconfTable 1 } NvDuiconfEntry ::= SEQUENCE { nvDuiconfIndex INTEGER, nvDuiconfType INTEGER, nvDuiconfNua DisplayString, nvDuiconfCalling DisplayString, nvDuiconfFirsttry INTEGER, nvDuiconfRetrytime INTEGER, nvDuiconfRetryinc INTEGER, nvDuiconfStatus INTEGER } nvDuiconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index" ::= {nvDuiconfEntry 1 } nvDuiconfType OBJECT-TYPE SYNTAX INTEGER { primary(1), -- (+1) alternate(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of DUI Circuit." ::= {nvDuiconfEntry 2 } nvDuiconfNua OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "X.121 address of DUI host." ::= {nvDuiconfEntry 3 } nvDuiconfCalling OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "calling address." ::= {nvDuiconfEntry 4 } nvDuiconfFirsttry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "num seconds til first try." ::= {nvDuiconfEntry 5 } nvDuiconfRetrytime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "num seconds for retry." ::= {nvDuiconfEntry 6 } nvDuiconfRetryinc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "retry time increment (in seconds)." ::= {nvDuiconfEntry 7 } nvDuiconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvDuiconfEntry 9 } -- -- dlspcconf -- nvDlspcconf OBJECT IDENTIFIER ::= {nevadaIti 18} nvDlspcconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDlspcconf 1} nvDlspcconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDlspcconf 2} nvDlspcconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDlspcconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlspcconf file." ::= {nvDlspcconf 3} nvDlspcconfEntry OBJECT-TYPE SYNTAX NvDlspcconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlspcconf record." INDEX {nvDlspcconfIndex} ::= {nvDlspcconfTable 1 } NvDlspcconfEntry ::= SEQUENCE { nvDlspcconfIndex INTEGER, nvDlspcconfNodename DisplayString, nvDlspcconfSitename DisplayString, nvDlspcconfHelpphone DisplayString, nvDlspcconfAbortmsg INTEGER, nvDlspcconfPidtable INTEGER, nvDlspcconfPortalarm INTEGER, nvDlspcconfStatus INTEGER } nvDlspcconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dlspcconf file record number." ::= {nvDlspcconfEntry 1 } nvDlspcconfNodename OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "name of node." ::= {nvDlspcconfEntry 2 } nvDlspcconfSitename OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "name of site." ::= {nvDlspcconfEntry 3 } nvDlspcconfHelpphone OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "phone number part of help message." ::= {nvDlspcconfEntry 4 } nvDlspcconfAbortmsg OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "message if session cannot be resumed." ::= {nvDlspcconfEntry 5 } nvDlspcconfPidtable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "to map X.3 P11 into protocol id." ::= {nvDlspcconfEntry 6 } nvDlspcconfPortalarm OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "number of idle ports to cause alarm." ::= {nvDlspcconfEntry 7 } nvDlspcconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvDlspcconfEntry 8 } -- -- dlstat file -- nvDlstat OBJECT IDENTIFIER ::= {nevadaSync 1} nvDlstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDlstat 1} nvDlstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDlstat 2} nvDlstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDlstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlstat file." ::= {nvDlstat 3} nvDlstatEntry OBJECT-TYPE SYNTAX NvDlstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlstat record." INDEX {nvDlstatIndex} ::= {nvDlstatTable 1 } NvDlstatEntry ::= SEQUENCE { nvDlstatIndex INTEGER, nvDlstatLinkname INTEGER, nvDlstatApp INTEGER, nvDlstatLfrmr INTEGER, nvDlstatLreset INTEGER, nvDlstatMstate INTEGER, nvDlstatProtocol INTEGER, nvDlstatPstate INTEGER, nvDlstatSstate INTEGER, nvDlstatAbtfrxs Counter, nvDlstatAlarms Counter, nvDlstatFrmrrxs Counter, nvDlstatFrmrtxs Counter, nvDlstatIfrxs Counter, nvDlstatIftxs Counter, nvDlstatRejrxs Counter, nvDlstatRejtxs Counter, nvDlstatRnrrxs Counter, nvDlstatRnrtxs Counter, nvDlstatRrrxs Counter, nvDlstatRrtxs Counter, nvDlstatRxdds Counter, nvDlstatTouts Counter, nvDlstatTretrys Counter, nvDlstatDtreset DisplayString } nvDlstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of dlstat" ::= {nvDlstatEntry 1 } nvDlstatLinkname OBJECT-TYPE SYNTAX INTEGER { nolink(1), -- (+1) link1(2), link2(3), link3(4), link4(5), link5(6), link6(7), link7(8), link8(9), link9(10), link10(11), link11(12), link12(13), link13(14), link14(15), link15(16), link16(17), link17(18), link18(19), link19(20), link20(21), link21(22), link22(23), link23(24), link24(25), link25(26), link26(27), link27(28), link28(29), link29(30), link30(31), link31(32), link32(33), link33(34), link34(35), link35(36), link36(37), link37(38), link38(39), link39(40), link40(41), link41(42), link42(43), link43(44), link44(45), link45(46), link46(47), link47(48), link48(49), link49(50), link50(51), link51(52), link52(53), link53(54), link54(55), link55(56), link56(57), link57(58), link58(59), link59(60), link60(61), link61(62), link62(63), link63(64), link64(65), link65(66), link66(67), link67(68), link68(69), link69(70), link70(71), link71(72), link72(73), link73(74), link74(75), link75(76), link76(77), link77(78), link78(79), link79(80), link80(81), link81(82), link82(83), link83(84), link84(85), link85(86), link86(87), link87(88), link88(89), link89(90), link90(91), link91(92), link92(93), link93(94), link94(95), link95(96), link96(97), link97(98), link98(99), link99(100), link100(101), link101(102), link102(103), link103(104), link104(105), link105(106), link106(107), link107(108), link108(109), link109(110), link110(111), link111(112), link112(113), link113(114), link114(115), link115(116), link116(117), link117(118), link118(119), link119(120), link120(121), link121(122), link122(123), link123(124), link124(125), link125(126), link126(127), link127(128), link128(129), link129(130), link130(131), link131(132), link132(133), link133(134), link134(135), link135(136), link136(137), link137(138), link138(139), link139(140), link140(141), link141(142), link142(143), link143(144), link144(145), link145(146), link146(147), link147(148), link148(149), link149(150), link150(151), link151(152), link152(153), link153(154), link154(155), link155(156), link156(157), link157(158), link158(159), link159(160), link160(161), link161(162), link162(163), link163(164), link164(165), link165(166), link166(167), link167(168), link168(169), link169(170), link170(171), link171(172), link172(173), link173(174), link174(175), link175(176), link176(177), link177(178), link178(179), link179(180), link180(181), link181(182), link182(183), link183(184), link184(185), link185(186), link186(187), link187(188), link188(189), link189(190), link190(191), link191(192), link192(193), link193(194), link194(195), link195(196), link196(197), link197(198), link198(199), link199(200), link200(201), link201(202), link202(203), link203(204), link204(205), link205(206), link206(207), link207(208), link208(209), link209(210), link210(211), link211(212), link212(213), link213(214), link214(215), link215(216), link216(217), link217(218), link218(219), link219(220), link220(221), link221(222), link222(223), link223(224), link224(225), link225(226), link226(227), link227(228), link228(229), link229(230), link230(231), link231(232), link232(233), link233(234), link234(235), link235(236), link236(237), link237(238), link238(239), link239(240), link240(241), link241(242), link242(243), link243(244), link244(245), link245(246), link246(247), link247(248), link248(249), link249(250), link250(251), link251(252), link252(253), link253(254), link254(255), link255(256), link256(257), link257(258), link258(259), link259(260), link260(261), link261(262), link262(263), link263(264), link264(265), link265(266), link266(267), link267(268), link268(269), link269(270), link270(271), link271(272), link272(273), link273(274), link274(275), link275(276), link276(277), link277(278), link278(279), link279(280), link280(281), link281(282), link282(283), link283(284), link284(285), link285(286), link286(287), link287(288), link288(289), link289(290), link290(291), link291(292), link292(293), link293(294), link294(295), link295(296), link296(297), link297(298), link298(299), link299(300), link300(301), link301(302), link302(303), link303(304), link304(305), link305(306), link306(307), link307(308), link308(309), link309(310), link310(311), link311(312), link312(313), link313(314), link314(315), link315(316), link316(317), link317(318), link318(319), link319(320), link320(321), link321(322), link322(323), link323(324), link324(325), link325(326), link326(327), link327(328), link328(329), link329(330), link330(331), link331(332), link332(333), link333(334), link334(335), link335(336), link336(337), link337(338), link338(339), link339(340), link340(341), link341(342), link342(343), link343(344), link344(345), link345(346), link346(347), link347(348), link348(349), link349(350), link350(351), link351(352), link352(353), link353(354), link354(355), link355(356), link356(357), link357(358), link358(359), link359(360), link360(361), link361(362), link362(363), link363(364), link364(365), link365(366), link366(367), link367(368), link368(369), link369(370), link370(371), link371(372), link372(373), link373(374), link374(375), link375(376), link376(377), link377(378), link378(379), link379(380), link380(381), link381(382), link382(383), link383(384), link384(385), link385(386), link386(387), link387(388), link388(389), link389(390), link390(391), link391(392), link392(393), link393(394), link394(395), link395(396), link396(397), link397(398), link398(399), link399(400), link400(401), link401(402), link402(403), link403(404), link404(405), link405(406), link406(407), link407(408), link408(409), link409(410), link410(411), link411(412), link412(413), link413(414), link414(415), link415(416), link416(417), link417(418), link418(419), link419(420), link420(421), link421(422), link422(423), link423(424), link424(425), link425(426), link426(427), link427(428), link428(429) } ACCESS read-only STATUS mandatory DESCRIPTION "name of link being used Initial status is 0+1." ::= {nvDlstatEntry 2 } nvDlstatApp OBJECT-TYPE SYNTAX INTEGER { dte(1), -- (+1) dce(2), primarySdlcStation(3), secondarySdlcStation(4), idle(5) } ACCESS read-only STATUS mandatory DESCRIPTION "link appearence Initial status is 0+1." ::= {nvDlstatEntry 3 } nvDlstatLfrmr OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) badNR(17), overrun(33), undefinedControlField(122), badSUFrame(193) } ACCESS read-only STATUS mandatory DESCRIPTION "reason code from last FRMR received Initial status is 0+1." ::= {nvDlstatEntry 4 } nvDlstatLreset OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) badCommandFrame(2), badResponseFrame(4), receiverOverrun(5), badNR(9), networkDisconnect(10), driverDisconnect(11), unsolicitedFinal(12), frmr(13), unexpectedUA(14), remoteTimeout(15), sabm(16), sarm(17), disc(18), dm(19), snrm(20) } ACCESS read-only STATUS mandatory DESCRIPTION "reason for last link reset Initial status is 0+1." ::= {nvDlstatEntry 5 } nvDlstatMstate OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- (+1) down(2), startingDriver(3), discSent(4), sabmSent(5), sarmSetup(6), frmrSent(7), sabmReset(8), up(9), clearing(10), dm(11), nu(12), sabmAwaitingRrAFterCr(13), badCmdAwaitingRrToSendFrmr(14), frmrAwaitingRrToEnterRs(15), discAwaitingRrToEnterSs(16), awaitingIdleDriverToSendDn(17), awaitingIdleDriverToResend(18), waitingToSendDisc(19), waitingToSendSnrm(20), disconnectMode(21), waitingToSendXid(22), sentXid(23), multipleSnrm(24) } ACCESS read-only STATUS mandatory DESCRIPTION "main state of link Initial status is 0+1." ::= {nvDlstatEntry 6 } nvDlstatProtocol OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), -- (+1) lap(2), lapb(4), lapbExtended(8), austrianPTT(12), pss(16), sdlc(17), sdlcExtended(49) } ACCESS read-only STATUS mandatory DESCRIPTION "link procedure selected Initial status is 3+1." ::= {nvDlstatEntry 7 } nvDlstatPstate OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- (+1) down(2), normalReceiveMode(3), remoteBusy(4), remoteTimedOut(5) } ACCESS read-only STATUS mandatory DESCRIPTION "a. primary UP state Initial status is 1+1." ::= {nvDlstatEntry 8 } nvDlstatSstate OBJECT-TYPE --% ALIAS "Secondary State" SYNTAX INTEGER { disabled(1), -- (+1) down(2), normalTransmit(3), localBusy(4), rejectFrameSent(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Secondary UP state . Initial status is 1+1." ::= {nvDlstatEntry 9 } nvDlstatAbtfrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "a. Number of aborted frames received Statistic is zeroed at startup time." ::= {nvDlstatEntry 10 } nvDlstatAlarms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of alarms. Statistic is zeroed at startup time." ::= {nvDlstatEntry 11 } nvDlstatFrmrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "a. Number of frame-reject frames received Statistic is zeroed at startup time." ::= {nvDlstatEntry 12 } nvDlstatFrmrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frame-reject frames transmitted. Statistic is zeroed at startup time." ::= {nvDlstatEntry 13 } nvDlstatIfrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames received. Statistic is zeroed at startup time." ::= {nvDlstatEntry 14 } nvDlstatIftxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames transmitted. Statistic is zeroed at startup time." ::= {nvDlstatEntry 15 } nvDlstatRejrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ-frames received. Statistic is zeroed at startup time." ::= {nvDlstatEntry 16 } nvDlstatRejtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ-frames transmitted. Statistic is zeroed at startup time." ::= {nvDlstatEntry 17 } nvDlstatRnrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR-frames received. Statistic is zeroed at startup time." ::= {nvDlstatEntry 18 } nvDlstatRnrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR-frames transmitted. Statistic is zeroed at startup time." ::= {nvDlstatEntry 19 } nvDlstatRrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR-frames received. Statistic is zeroed at startup time." ::= {nvDlstatEntry 20 } nvDlstatRrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR-frames transmitted. Statistic is zeroed at startup time." ::= {nvDlstatEntry 21 } nvDlstatRxdds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of receive device-driver errors. Statistic is zeroed at startup time." ::= {nvDlstatEntry 22 } nvDlstatTouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of link resets due to remote timeouts. Statistic is zeroed at startup time." ::= {nvDlstatEntry 23 } nvDlstatTretrys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of retries due to remote timeouts. Statistic is zeroed at startup time." ::= {nvDlstatEntry 24 } nvDlstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= {nvDlstatEntry 25 } -- -- linkstat file -- nvLinkstat OBJECT IDENTIFIER ::= {nevadaSync 2} nvLinkstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvLinkstat 1} nvLinkstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvLinkstat 2} nvLinkstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvLinkstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "linkstat file." ::= {nvLinkstat 3} nvLinkstatEntry OBJECT-TYPE SYNTAX NvLinkstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "linkstat record." INDEX {nvLinkstatIndex} ::= {nvLinkstatTable 1 } NvLinkstatEntry ::= SEQUENCE { nvLinkstatIndex INTEGER, nvLinkstatPort DisplayString, nvLinkstatApp INTEGER, nvLinkstatFstate INTEGER, nvLinkstatLfrmr INTEGER, nvLinkstatLreset INTEGER, nvLinkstatN1 INTEGER, nvLinkstatProtocol INTEGER, nvLinkstatAbtfrxs Counter, nvLinkstatAlarms Counter, nvLinkstatFrmrrxs Counter, nvLinkstatFrmrtxs Counter, nvLinkstatIfrxs Counter, nvLinkstatIftxs Counter, nvLinkstatRejrxs Counter, nvLinkstatRejtxs Counter, nvLinkstatRnrrxs Counter, nvLinkstatRnrtxs Counter, nvLinkstatRrrxs Counter, nvLinkstatRrtxs Counter, nvLinkstatRxdds Counter, nvLinkstatTouts Counter, nvLinkstatTretrys Counter, nvLinkstatTchartxs Counter, nvLinkstatTcharrxs Counter, nvLinkstatDtreset DisplayString, nvLinkstatNlinkup Counter } nvLinkstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of linkstat record" ::= {nvLinkstatEntry 1 } -- nvLinkstatPort OBJECT-TYPE SYNTAX DisplayString (SIZE (1..11)) ACCESS read-only STATUS mandatory DESCRIPTION "name of port being used Initial status is 0." ::= {nvLinkstatEntry 2 } nvLinkstatApp OBJECT-TYPE SYNTAX INTEGER { dte(1), -- (+1) dce(2), primarySDLCStation(3), secondarySDLCStation(4), idle(5) } ACCESS read-only STATUS mandatory DESCRIPTION "link appearence Initial status is 0+1." ::= {nvLinkstatEntry 3 } nvLinkstatFstate OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- (+1) down(2), startingDriver(3), up(4) } ACCESS read-only STATUS mandatory DESCRIPTION "main state of FLTE FSM Initial status is 0+1." ::= {nvLinkstatEntry 4 } nvLinkstatLfrmr OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) badNR(17), overrun(33), undefinedControlField(129), badSUFrame(193) } ACCESS read-only STATUS mandatory DESCRIPTION "reason code from last FRMR received Initial status is 0+1." ::= {nvLinkstatEntry 5 } nvLinkstatLreset OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) illegalCommand(2), illegalResponse(4), receiverOverrun(5), illegalNr(9), networkDisconnect(10), driverDisconnect(11), unsolicitedFinal(12), frmrOrCmdr(13), unexpectedUa(14), remoteTimedOut(15), sabm(16), sarm(17), disconnect(18), dm(19), snrm(20) } ACCESS read-only STATUS mandatory DESCRIPTION "reason for last link reset Initial status is 0+1." ::= {nvLinkstatEntry 6 } nvLinkstatN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " actual n1 used (in bits) Initial status is 0." ::= {nvLinkstatEntry 7 } nvLinkstatProtocol OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), -- (+1) lap(2), lapb(4), lapbExtended(8), austrianPTT(12), pss(16), sdlc(17), sdlcExtended(49) } ACCESS read-only STATUS mandatory DESCRIPTION "link procedure selected Initial status is 3+1." ::= {nvLinkstatEntry 8 } nvLinkstatAbtfrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of aborted frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 9 } nvLinkstatAlarms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of alarms. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 10 } nvLinkstatFrmrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frame-reject frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 11 } nvLinkstatFrmrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frame-reject frames transmitted. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 12 } nvLinkstatIfrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 13 } nvLinkstatIftxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames transmitted. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 14 } nvLinkstatRejrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ-frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 15 } nvLinkstatRejtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ-frames transmitted. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 16 } nvLinkstatRnrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR-frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 17 } nvLinkstatRnrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR-frames transmitted. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 18 } nvLinkstatRrrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR-frames received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 19 } nvLinkstatRrtxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR-frames transmitted. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 20 } nvLinkstatRxdds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of receive device-driver errors. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 21 } nvLinkstatTouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of link resets due to remote timeouts. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 22 } nvLinkstatTretrys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of retries due to remote timeouts. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 23 } nvLinkstatTchartxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of characters sent. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 24 } nvLinkstatTcharrxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of characters received. Statistic is zeroed at startup time." ::= {nvLinkstatEntry 25 } nvLinkstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= {nvLinkstatEntry 26 } nvLinkstatNlinkup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times link came up." ::= {nvLinkstatEntry 27 } nvDlconf OBJECT IDENTIFIER ::= { nevadaSync 3 } nvDlconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvDlconf 1} nvDlconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvDlconf 2} nvDlconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvDlconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlconf file." ::= { nvDlconf 3 } nvDlconfEntry OBJECT-TYPE SYNTAX NvDlconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "dlconf record." INDEX { nvDlconfDlnumber } ::= { nvDlconfTable 1 } NvDlconfEntry ::= SEQUENCE { nvDlconfDlnumber INTEGER, nvDlconfLinkname INTEGER, nvDlconfPuaddr DisplayString } nvDlconfDlnumber OBJECT-TYPE SYNTAX INTEGER (1..428) ACCESS read-only STATUS mandatory DESCRIPTION "Data Link Record (dlnumber) Number of the DL,ie,record id# in DLCONF file. Parameter is set during factory configuration." ::= { nvDlconfEntry 2 } nvDlconfLinkname OBJECT-TYPE SYNTAX INTEGER { nolink(1), -- unassigned (+1) link1(2), -- link2(3), -- link3(4), -- link4(5), -- link5(6), -- link6(7), -- link7(8), -- link8(9), -- link9(10), -- link10(11), -- link11(12), -- link12(13), -- link13(14), -- link14(15), -- link15(16), -- link16(17), -- link17(18), -- link18(19), -- link19(20), -- link20(21), -- link21(22), -- link22(23), -- link23(24), -- link24(25), -- link25(26), -- link26(27), -- link27(28), -- link28(29), -- link29(30), -- link30(31), -- link31(32), -- link32(33), -- link33(34), -- link34(35), -- link35(36), -- link36(37), -- link37(38), -- link38(39), -- link39(40), -- link40(41), -- link41(42), -- link42(43), -- link43(44), -- link44(45), -- link45(46), -- link46(47), -- link47(48), -- link48(49), -- link49(50), -- link50(51), -- link51(52), -- link52(53), -- link53(54), -- link54(55), -- link55(56), -- link56(57), -- link57(58), -- link58(59), -- link59(60), -- link60(61), -- link61(62), -- link62(63), -- link63(64), -- link64(65), -- link65(66), -- link66(67), -- link67(68), -- link68(69), -- link69(70), -- link70(71), -- link71(72), -- link72(73), -- link73(74), -- link74(75), -- link75(76), -- link76(77), -- link77(78), -- link78(79), -- link79(80), -- link80(81), -- link81(82), -- link82(83), -- link83(84), -- link84(85), -- link85(86), -- link86(87), -- link87(88), -- link88(89), -- link89(90), -- link90(91), -- link91(92), -- link92(93), -- link93(94), -- link94(95), -- link95(96), -- link96(97), -- link97(98), -- link98(99), -- link99(100), -- link100(101), -- link101(102), -- link102(103), -- link103(104), -- link104(105), -- link105(106), -- link106(107), -- link107(108), -- link108(109), -- link109(110), -- link110(111), -- link111(112), -- link112(113), -- link113(114), -- link114(115), -- link115(116), -- link116(117), -- link117(118), -- link118(119), -- link119(120), -- link120(121), -- link121(122), -- link122(123), -- link123(124), -- link124(125), -- link125(126), -- link126(127), -- link127(128), -- link128(129), -- link129(130), -- link130(131), -- link131(132), -- link132(133), -- link133(134), -- link134(135), -- link135(136), -- link136(137), -- link137(138), -- link138(139), -- link139(140), -- link140(141), -- link141(142), -- link142(143), -- link143(144), -- link144(145), -- link145(146), -- link146(147), -- link147(148), -- link148(149), -- link149(150), -- link150(151), -- link151(152), -- link152(153), -- link153(154), -- link154(155), -- link155(156), -- link156(157), -- link157(158), -- link158(159), -- link159(160), -- link160(161), -- link161(162), -- link162(163), -- link163(164), -- link164(165), -- link165(166), -- link166(167), -- link167(168), -- link168(169), -- link169(170), -- link170(171), -- link171(172), -- link172(173), -- link173(174), -- link174(175), -- link175(176), -- link176(177), -- link177(178), -- link178(179), -- link179(180), -- link180(181), -- link181(182), -- link182(183), -- link183(184), -- link184(185), -- link185(186), -- link186(187), -- link187(188), -- link188(189), -- link189(190), -- link190(191), -- link191(192), -- link192(193), -- link193(194), -- link194(195), -- link195(196), -- link196(197), -- link197(198), -- link198(199), -- link199(200), -- link200(201), -- link201(202), -- link202(203), -- link203(204), -- link204(205), -- link205(206), -- link206(207), -- link207(208), -- link208(209), -- link209(210), -- link210(211), -- link211(212), -- link212(213), -- link213(214), -- link214(215), -- link215(216), -- link216(217), -- link217(218), -- link218(219), -- link219(220), -- link220(221), -- link221(222), -- link222(223), -- link223(224), -- link224(225), -- link225(226), -- link226(227), -- link227(228), -- link228(229), -- link229(230), -- link230(231), -- link231(232), -- link232(233), -- link233(234), -- link234(235), -- link235(236), -- link236(237), -- link237(238), -- link238(239), -- link239(240), -- link240(241), -- link241(242), -- link242(243), -- link243(244), -- link244(245), -- link245(246), -- link246(247), -- link247(248), -- link248(249), -- link249(250), -- link250(251), -- link251(252), -- link252(253), -- link253(254), -- link254(255), -- link255(256), -- link256(257), -- link257(258), -- link258(259), -- link259(260), -- link260(261), -- link261(262), -- link262(263), -- link263(264), -- link264(265), -- link265(266), -- link266(267), -- link267(268), -- link268(269), -- link269(270), -- link270(271), -- link271(272), -- link272(273), -- link273(274), -- link274(275), -- link275(276), -- link276(277), -- link277(278), -- link278(279), -- link279(280), -- link280(281), -- link281(282), -- link282(283), -- link283(284), -- link284(285), -- link285(286), -- link286(287), -- link287(288), -- link288(289), -- link289(290), -- link290(291), -- link291(292), -- link292(293), -- link293(294), -- link294(295), -- link295(296), -- link296(297), -- link297(298), -- link298(299), -- link299(300), -- link300(301), -- link301(302), -- link302(303), -- link303(304), -- link304(305), -- link305(306), -- link306(307), -- link307(308), -- link308(309), -- link309(310), -- link310(311), -- link311(312), -- link312(313), -- link313(314), -- link314(315), -- link315(316), -- link316(317), -- link317(318), -- link318(319), -- link319(320), -- link320(321), -- link321(322), -- link322(323), -- link323(324), -- link324(325), -- link325(326), -- link326(327), -- link327(328), -- link328(329), -- link329(330), -- link330(331), -- link331(332), -- link332(333), -- link333(334), -- link334(335), -- link335(336), -- link336(337), -- link337(338), -- link338(339), -- link339(340), -- link340(341), -- link341(342), -- link342(343), -- link343(344), -- link344(345), -- link345(346), -- link346(347), -- link347(348), -- link348(349), -- link349(350), -- link350(351), -- link351(352), -- link352(353), -- link353(354), -- link354(355), -- link355(356), -- link356(357), -- link357(358), -- link358(359), -- link359(360), -- link360(361), -- link361(362), -- link362(363), -- link363(364), -- link364(365), -- link365(366), -- link366(367), -- link367(368), -- link368(369), -- link369(370), -- link370(371), -- link371(372), -- link372(373), -- link373(374), -- link374(375), -- link375(376), -- link376(377), -- link377(378), -- link378(379), -- link379(380), -- link380(381), -- link381(382), -- link382(383), -- link383(384), -- link384(385), -- link385(386), -- link386(387), -- link387(388), -- link388(389), -- link389(390), -- link390(391), -- link391(392), -- link392(393), -- link393(394), -- link394(395), -- link395(396), -- link396(397), -- link397(398), -- link398(399), -- link399(400), -- link400(401), -- link401(402), -- link402(403), -- link403(404), -- link404(405), -- link405(406), -- link406(407), -- link407(408), -- link408(409), -- link409(410), -- link410(411), -- link411(412), -- link412(413), -- link413(414), -- link414(415), -- link415(416), -- link416(417), -- link417(418), -- link418(419), -- link419(420), -- link420(421), -- link421(422), -- link422(423), -- link423(424), -- link424(425), -- link425(426), -- link426(427), -- link427(428), -- link428(429) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Link Name (linkname) " ::= { nvDlconfEntry 3 } nvDlconfPuaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "Polling Address (puaddr) Default value is 0." ::= { nvDlconfEntry 4 } -- The records in this file configure instances of the Synchronous Link link -- component. There is one record per instance of the link component. -- -- This type should be identical to the 'lapp' type in ls.pd. -- -- -- In lapbd.dd there are mask defines for this type. -- -Vtlapb is 0x01 and indicates LAP/LAPB/PSS. -- -Vtsdlc is 0x10 and indicates SLDCP/SDLCS. -- They enable determining the type (SDLC or LAPB) of protocol. -- nvLinkconf OBJECT IDENTIFIER ::= { nevadaSync 4 } nvLinkconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvLinkconf 1} nvLinkconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvLinkconf 2} nvLinkconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvLinkconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "linkconf file." ::= { nvLinkconf 3 } nvLinkconfEntry OBJECT-TYPE SYNTAX NvLinkconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "linkconf record." INDEX { nvLinkconfIndex } ::= { nvLinkconfTable 1 } NvLinkconfEntry ::= SEQUENCE { nvLinkconfIndex INTEGER, nvLinkconfLinkname INTEGER, nvLinkconfPortname DisplayString, nvLinkconfRsrcpool DisplayString, nvLinkconfProtocol INTEGER, nvLinkconfWsze INTEGER, nvLinkconfHostinact INTEGER, nvLinkconfN2 INTEGER, nvLinkconfPollthres INTEGER, nvLinkconfT1 INTEGER, nvLinkconfT2 INTEGER, nvLinkconfT3 INTEGER, nvLinkconfAckthresh INTEGER, nvLinkconfDialout INTEGER, nvLinkconfWaitframe INTEGER } nvLinkconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of linkconf record" ::= { nvLinkconfEntry 1 } nvLinkconfLinkname OBJECT-TYPE SYNTAX INTEGER { nolink(1), -- unassigned (+1) link1(2), -- link2(3), -- link3(4), -- link4(5), -- link5(6), -- link6(7), -- link7(8), -- link8(9), -- link9(10), -- link10(11), -- link11(12), -- link12(13), -- link13(14), -- link14(15), -- link15(16), -- link16(17), -- link17(18), -- link18(19), -- link19(20), -- link20(21), -- link21(22), -- link22(23), -- link23(24), -- link24(25), -- link25(26), -- link26(27), -- link27(28), -- link28(29), -- link29(30), -- link30(31), -- link31(32), -- link32(33), -- link33(34), -- link34(35), -- link35(36), -- link36(37), -- link37(38), -- link38(39), -- link39(40), -- link40(41), -- link41(42), -- link42(43), -- link43(44), -- link44(45), -- link45(46), -- link46(47), -- link47(48), -- link48(49), -- link49(50), -- link50(51), -- link51(52), -- link52(53), -- link53(54), -- link54(55), -- link55(56), -- link56(57), -- link57(58), -- link58(59), -- link59(60), -- link60(61), -- link61(62), -- link62(63), -- link63(64), -- link64(65), -- link65(66), -- link66(67), -- link67(68), -- link68(69), -- link69(70), -- link70(71), -- link71(72), -- link72(73), -- link73(74), -- link74(75), -- link75(76), -- link76(77), -- link77(78), -- link78(79), -- link79(80), -- link80(81), -- link81(82), -- link82(83), -- link83(84), -- link84(85), -- link85(86), -- link86(87), -- link87(88), -- link88(89), -- link89(90), -- link90(91), -- link91(92), -- link92(93), -- link93(94), -- link94(95), -- link95(96), -- link96(97), -- link97(98), -- link98(99), -- link99(100), -- link100(101), -- link101(102), -- link102(103), -- link103(104), -- link104(105), -- link105(106), -- link106(107), -- link107(108), -- link108(109), -- link109(110), -- link110(111), -- link111(112), -- link112(113), -- link113(114), -- link114(115), -- link115(116), -- link116(117), -- link117(118), -- link118(119), -- link119(120), -- link120(121), -- link121(122), -- link122(123), -- link123(124), -- link124(125), -- link125(126), -- link126(127), -- link127(128), -- link128(129), -- link129(130), -- link130(131), -- link131(132), -- link132(133), -- link133(134), -- link134(135), -- link135(136), -- link136(137), -- link137(138), -- link138(139), -- link139(140), -- link140(141), -- link141(142), -- link142(143), -- link143(144), -- link144(145), -- link145(146), -- link146(147), -- link147(148), -- link148(149), -- link149(150), -- link150(151), -- link151(152), -- link152(153), -- link153(154), -- link154(155), -- link155(156), -- link156(157), -- link157(158), -- link158(159), -- link159(160), -- link160(161), -- link161(162), -- link162(163), -- link163(164), -- link164(165), -- link165(166), -- link166(167), -- link167(168), -- link168(169), -- link169(170), -- link170(171), -- link171(172), -- link172(173), -- link173(174), -- link174(175), -- link175(176), -- link176(177), -- link177(178), -- link178(179), -- link179(180), -- link180(181), -- link181(182), -- link182(183), -- link183(184), -- link184(185), -- link185(186), -- link186(187), -- link187(188), -- link188(189), -- link189(190), -- link190(191), -- link191(192), -- link192(193), -- link193(194), -- link194(195), -- link195(196), -- link196(197), -- link197(198), -- link198(199), -- link199(200), -- link200(201), -- link201(202), -- link202(203), -- link203(204), -- link204(205), -- link205(206), -- link206(207), -- link207(208), -- link208(209), -- link209(210), -- link210(211), -- link211(212), -- link212(213), -- link213(214), -- link214(215), -- link215(216), -- link216(217), -- link217(218), -- link218(219), -- link219(220), -- link220(221), -- link221(222), -- link222(223), -- link223(224), -- link224(225), -- link225(226), -- link226(227), -- link227(228), -- link228(229), -- link229(230), -- link230(231), -- link231(232), -- link232(233), -- link233(234), -- link234(235), -- link235(236), -- link236(237), -- link237(238), -- link238(239), -- link239(240), -- link240(241), -- link241(242), -- link242(243), -- link243(244), -- link244(245), -- link245(246), -- link246(247), -- link247(248), -- link248(249), -- link249(250), -- link250(251), -- link251(252), -- link252(253), -- link253(254), -- link254(255), -- link255(256), -- link256(257), -- link257(258), -- link258(259), -- link259(260), -- link260(261), -- link261(262), -- link262(263), -- link263(264), -- link264(265), -- link265(266), -- link266(267), -- link267(268), -- link268(269), -- link269(270), -- link270(271), -- link271(272), -- link272(273), -- link273(274), -- link274(275), -- link275(276), -- link276(277), -- link277(278), -- link278(279), -- link279(280), -- link280(281), -- link281(282), -- link282(283), -- link283(284), -- link284(285), -- link285(286), -- link286(287), -- link287(288), -- link288(289), -- link289(290), -- link290(291), -- link291(292), -- link292(293), -- link293(294), -- link294(295), -- link295(296), -- link296(297), -- link297(298), -- link298(299), -- link299(300), -- link300(301), -- link301(302), -- link302(303), -- link303(304), -- link304(305), -- link305(306), -- link306(307), -- link307(308), -- link308(309), -- link309(310), -- link310(311), -- link311(312), -- link312(313), -- link313(314), -- link314(315), -- link315(316), -- link316(317), -- link317(318), -- link318(319), -- link319(320), -- link320(321), -- link321(322), -- link322(323), -- link323(324), -- link324(325), -- link325(326), -- link326(327), -- link327(328), -- link328(329), -- link329(330), -- link330(331), -- link331(332), -- link332(333), -- link333(334), -- link334(335), -- link335(336), -- link336(337), -- link337(338), -- link338(339), -- link339(340), -- link340(341), -- link341(342), -- link342(343), -- link343(344), -- link344(345), -- link345(346), -- link346(347), -- link347(348), -- link348(349), -- link349(350), -- link350(351), -- link351(352), -- link352(353), -- link353(354), -- link354(355), -- link355(356), -- link356(357), -- link357(358), -- link358(359), -- link359(360), -- link360(361), -- link361(362), -- link362(363), -- link363(364), -- link364(365), -- link365(366), -- link366(367), -- link367(368), -- link368(369), -- link369(370), -- link370(371), -- link371(372), -- link372(373), -- link373(374), -- link374(375), -- link375(376), -- link376(377), -- link377(378), -- link378(379), -- link379(380), -- link380(381), -- link381(382), -- link382(383), -- link383(384), -- link384(385), -- link385(386), -- link386(387), -- link387(388), -- link388(389), -- link389(390), -- link390(391), -- link391(392), -- link392(393), -- link393(394), -- link394(395), -- link395(396), -- link396(397), -- link397(398), -- link398(399), -- link399(400), -- link400(401), -- link401(402), -- link402(403), -- link403(404), -- link404(405), -- link405(406), -- link406(407), -- link407(408), -- link408(409), -- link409(410), -- link410(411), -- link411(412), -- link412(413), -- link413(414), -- link414(415), -- link415(416), -- link416(417), -- link417(418), -- link418(419), -- link419(420), -- link420(421), -- link421(422), -- link422(423), -- link423(424), -- link424(425), -- link425(426), -- link426(427), -- link427(428), -- link428(429) -- } ACCESS read-only STATUS mandatory DESCRIPTION "Link Name (linkname) Link name and number (ie,'Link1') Parameter is set during factory configuration." ::= { nvLinkconfEntry 2 } nvLinkconfPortname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Port to serve this link." ::= { nvLinkconfEntry 3 } nvLinkconfRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource Pool Name." ::= { nvLinkconfEntry 4 } nvLinkconfProtocol OBJECT-TYPE SYNTAX INTEGER { lap(2), -- 0x01 LAP procedure (+1) lapb(4), -- 0x03 LAPB procedure lapbe(8), -- 0x07 LAPB procedure with extended frame sequencing aust(12), -- 0x0b austrian PTT pss(16), -- 0x0f PSS (U.K.) special procedure sdlc(17), -- 0x10 SDLC sdlce(49) -- 0x30 SDLC with extended frame sequencing } ACCESS read-write STATUS mandatory DESCRIPTION "Link-Level Protocol (protocol) This field defines the Synchronous Link link procedure that is to be followed. Default value is 3+1." ::= { nvLinkconfEntry 5 } nvLinkconfWsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Link-Level Window Size (wsze) Option to select window size to be used. Between 1 and 7 for modulo 8. Between 1 and 127 for modulo 127. Default value is 7." ::= { nvLinkconfEntry 6 } nvLinkconfHostinact OBJECT-TYPE SYNTAX INTEGER (0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "SDLC Host Inactivity Timer (hostinact) SDLC secondary station maximum wait without host contact. Default value is 600." ::= { nvLinkconfEntry 9 } nvLinkconfN2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of Retransmissions (n2) Maximum number of times a data frame will be retransmitted, before resetting the link. Default value is 10." ::= { nvLinkconfEntry 11 } nvLinkconfPollthres OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "SDLC Poll Threshold (pollthres) Default value is 20." ::= { nvLinkconfEntry 12 } nvLinkconfT1 OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Timer Recovery Timer (t1) Timer for maximum wait for acknowledgment. When timer expires, timeout recovery is attempted. Default value is 5." ::= { nvLinkconfEntry 13 } nvLinkconfT2 OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Acknowledgement Timer (t2) LAPB maximum amount of time before acknowledgement. Default value is 0." ::= { nvLinkconfEntry 14 } nvLinkconfT3 OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Link Watchdog Timer (t3) LAPB maximum amount of link idle time before a probe is done. Default value is 15." ::= { nvLinkconfEntry 15 } nvLinkconfAckthresh OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Acknowledgement Threshold (ackthresh) " ::= { nvLinkconfEntry 16 } nvLinkconfDialout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "dialout command string id" ::= { nvLinkconfEntry 18} nvLinkconfWaitframe OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of T1 periods to wait for frame upon startup." ::= { nvLinkconfEntry 19} -- -- x25stat file -- nvX25stat OBJECT IDENTIFIER ::= { nevadaX25 1} nvX25statMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvX25stat 1} nvX25statNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvX25stat 2} nvX25statTable OBJECT-TYPE SYNTAX SEQUENCE OF NvX25statEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25stat file." ::= {nvX25stat 3} nvX25statEntry OBJECT-TYPE SYNTAX NvX25statEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25stat record." INDEX {nvX25statIndex} ::= {nvX25statTable 1 } NvX25statEntry ::= SEQUENCE { nvX25statIndex DisplayString, nvX25statNetname DisplayString, nvX25statCode INTEGER, nvX25statDiag INTEGER, nvX25statIfstate INTEGER, nvX25statCallcur INTEGER, nvX25statOpen INTEGER, nvX25statUp INTEGER, nvX25statLinkup INTEGER, nvX25statNtxcalls Counter, nvX25statNrxcalls Counter, nvX25statNtxcallcs Counter, nvX25statNrxcallcs Counter, nvX25statNtxclrs Counter, nvX25statNrxclrs Counter, nvX25statNtxclrcs Counter, nvX25statNrxclrcs Counter, nvX25statNtxres Counter, nvX25statNrxres Counter, nvX25statNtxints Counter, nvX25statNrxints Counter, nvX25statNtxrrs Counter, nvX25statNrxrrs Counter, nvX25statNtxrnrs Counter, nvX25statNrxrnrs Counter, nvX25statNtxpaks Counter, nvX25statNrxpaks Counter, nvX25statNtxsegs Counter, nvX25statNrxsegs Counter, nvX25statNtxchars Counter, nvX25statNrxchars Counter, nvX25statMaxvc INTEGER, nvX25statDtreset DisplayString } nvX25statIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of x25stat record" ::= {nvX25statEntry 1 } nvX25statNetname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "x25stat: network interface name." ::= {nvX25statEntry 2 } nvX25statCode OBJECT-TYPE SYNTAX INTEGER { dteOriginated(2), numberBusy(3), outOfOrder(4), remoteDteOperational(5), remoteProcedureError(6), localProcedureError(7), reverseChargeNotSubscribed(8), incompatibleDestination(9), fastSelectNotSubscribed(10), invalidFacilityRequest(11), accessBarred(12), networkCongestion(13), networkOperational(14), notObtainable(15), rpoaOutOfOrder(16), shipAbsent(17), networkOutOfOrder(18) } ACCESS read-only STATUS mandatory DESCRIPTION "last clear or reset code. Initial status is 1+1." ::= {nvX25statEntry 3 } nvX25statDiag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "last diagnostic code. Initial status is 0." ::= {nvX25statEntry 4 } nvX25statIfstate OBJECT-TYPE SYNTAX INTEGER { r1Down(1), -- (+1) r2Startup(2), r3Restart(3), r4Up(4), r5Disconnected(5) } ACCESS read-only STATUS mandatory DESCRIPTION "network state. Current state of network interface. Initial status is 0+1." ::= {nvX25statEntry 5 } nvX25statCallcur OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of X25 calls currently active." ::= { nvX25statEntry 6} nvX25statOpen OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1) yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "network open? Initial status is 0+1." ::= {nvX25statEntry 7 } nvX25statUp OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1) yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "network up? Initial status is 0+1." ::= {nvX25statEntry 8 } nvX25statNtxcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of call requests sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 9 } nvX25statNrxcalls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of call requests received. Statistic is zeroed at startup time." ::= {nvX25statEntry 10 } nvX25statNtxcallcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of call confs sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 11 } nvX25statNrxcallcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of call confs received. Statistic is zeroed at startup time." ::= {nvX25statEntry 12 } nvX25statNtxclrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of clear requests sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 13 } nvX25statNrxclrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of clear requests received. Statistic is zeroed at startup time." ::= {nvX25statEntry 14 } nvX25statNtxclrcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of clear confs sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 15 } nvX25statNrxclrcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of clear confs received. Statistic is zeroed at startup time." ::= {nvX25statEntry 16 } nvX25statNtxres OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of reset requests send. Statistic is zeroed at startup time." ::= {nvX25statEntry 17 } nvX25statNrxres OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of reset requests received. Statistic is zeroed at startup time." ::= {nvX25statEntry 18 } nvX25statNtxints OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of int requests send. Statistic is zeroed at startup time." ::= {nvX25statEntry 19 } nvX25statNrxints OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of int requests received. Statistic is zeroed at startup time." ::= {nvX25statEntry 20 } nvX25statNtxrrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of receiver readys send. Statistic is zeroed at startup time." ::= {nvX25statEntry 21 } nvX25statNrxrrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of receiver readys received. Statistic is zeroed at startup time." ::= {nvX25statEntry 22 } nvX25statNtxrnrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of receiver not readys send. Statistic is zeroed at startup time." ::= {nvX25statEntry 23 } nvX25statNrxrnrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of receiver not readys received. Statistic is zeroed at startup time." ::= {nvX25statEntry 24 } nvX25statNtxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data packets sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 25 } nvX25statNrxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data packets received. Statistic is zeroed at startup time." ::= {nvX25statEntry 26 } nvX25statNtxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data segments sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 27 } nvX25statNrxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data segments received. Statistic is zeroed at startup time." ::= {nvX25statEntry 28 } nvX25statNtxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data chars sent. Statistic is zeroed at startup time." ::= {nvX25statEntry 29 } nvX25statNrxchars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of data chars received. Statistic is zeroed at startup time." ::= {nvX25statEntry 30 } nvX25statMaxvc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "maximum connections. Statistic is zeroed at startup time." ::= {nvX25statEntry 31 } nvX25statDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= {nvX25statEntry 32 } nvX25statLinkup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Link (level2) uptime in seconds." ::= { nvX25statEntry 33 } -- This file contains information about each virtual call -- that is in progress. There is one record for each virtual -- call in progress. nvX25call OBJECT IDENTIFIER ::= { nevadaX25 2 } nvX25callMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvX25call 1} nvX25callNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvX25call 2} nvX25callTable OBJECT-TYPE SYNTAX SEQUENCE OF NvX25callEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25call file." ::= { nvX25call 3 } nvX25callEntry OBJECT-TYPE SYNTAX NvX25callEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25call record." INDEX { nvX25callIndex } ::= { nvX25callTable 1 } NvX25callEntry ::= SEQUENCE { nvX25callIndex INTEGER, nvX25callNetname DisplayString, nvX25callChanstate INTEGER, nvX25callChantype INTEGER, nvX25callCode INTEGER, nvX25callDiag INTEGER, nvX25callExpack INTEGER, nvX25callLcn INTEGER, nvX25callRxpsze INTEGER, nvX25callRxwsze INTEGER, nvX25callRxtput INTEGER, nvX25callNr INTEGER, nvX25callNrunak INTEGER, nvX25callNs INTEGER, nvX25callNsunak INTEGER, nvX25callNunakpac INTEGER, nvX25callTxpsze INTEGER, nvX25callTxwsze INTEGER, nvX25callTxtput INTEGER, nvX25callNrxints Counter, nvX25callNrxpaks Counter, nvX25callNrxres Counter, nvX25callNrxrnrs Counter, nvX25callNrxrrs Counter, nvX25callNrxsegs Counter, nvX25callNtxints Counter, nvX25callNtxpaks Counter, nvX25callNtxsegs Counter, nvX25callNtxres Counter, nvX25callNtxrrs Counter, nvX25callDtreset DisplayString } nvX25callIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of x25call record" ::= { nvX25callEntry 1 } nvX25callNetname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "network interface name (as defined in the X25conf record) " ::= { nvX25callEntry 2 } nvX25callChanstate OBJECT-TYPE SYNTAX INTEGER { p1(1), -- ready (+1) p1r(2), -- ready RESET p2(3), -- local waiting p3(4), -- remote waiting p3r(5), -- remote waiting RESET d1i1(6), -- normal d1i2(7), -- remote interrupted d1i3(8), -- local interrupted d1i4(9), -- both interrupted d2(10), -- remote reset d3(11), -- local reset d4(12), -- error reset I d5(13), -- error reset II d6(14), -- error reset III d7(15), -- error reset IV p5C(16), -- DCE call collision p5T(17), -- DTE call collision p6(18), -- local clearing p6r(19), -- PVC clearing p2r(20), -- wait for PVC response p7r(21) -- data received causing PVC establishment } ACCESS read-only STATUS mandatory DESCRIPTION "logical channel state Initial status is p1 (0+1)." ::= { nvX25callEntry 3 } nvX25callChantype OBJECT-TYPE SYNTAX INTEGER { incoming(2), -- Incoming (+1) outgoing(3), -- Outgoing twoway(4), -- Two-way permanent(5) -- Permanent } ACCESS read-only STATUS mandatory DESCRIPTION "logical channel type Initial status is 3+1." ::= { nvX25callEntry 4 } nvX25callCode OBJECT-TYPE SYNTAX INTEGER { c-dte(2), -- DTE originated (+1) c-bsy(3), -- number busy c-ooo(4), -- out of order c-rdo(5), -- remote DTE operational c-rpe(6), -- remote procedure error c-lpe(7), -- local procedure error c-rns(8), -- reverse charging acceptance not subscribed c-id(9), -- incompatible destination c-fns(10), -- fast select not subscribed c-ifr(11), -- invalid facility request c-ab(12), -- access barred c-nc(13), -- network congestion c-no(14), -- network operational c-nob(15), -- not obtainable c-roo(16), -- RPOA out of order c-sa(17), -- ship absent c-noo(18) -- network out of order } ACCESS read-only STATUS mandatory DESCRIPTION "last clear or reset code Initial status is 1+1." ::= { nvX25callEntry 5 } nvX25callDiag OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "last diagnostic code Initial status is 0." ::= { nvX25callEntry 6 } nvX25callExpack OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "number of ACKs expected This field indicates the number of message acknowlegements that are expected from the Network User and is used for flow control within the node. Initial status is 0." ::= { nvX25callEntry 7 } nvX25callLcn OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "logical channel number assigned to this call " ::= { nvX25callEntry 8 } nvX25callRxpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11), -- 1024 bytes b2048(12), -- 2048 bytes b4096(13) -- 4096 bytes } ACCESS read-only STATUS mandatory DESCRIPTION "receive packet size This field indicates the largest packet that will be received across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1." ::= { nvX25callEntry 9 } nvX25callRxwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "receive window This field indicates the packet-level receive window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2." ::= { nvX25callEntry 10 } nvX25callRxtput OBJECT-TYPE SYNTAX INTEGER { bps75(4), -- 75 bps (+1) bps150(5), -- 150 bps bps300(6), -- 300 bps bps600(7), -- 600 bps bps1200(8), -- 1200 bps bps2400(9), -- 2400 bps bps4800(10), -- 4800 bps bps9600(11), -- 9600 bps bps19200(12), -- 19200 bps bps48000(13) -- 48000 bps } ACCESS read-only STATUS mandatory DESCRIPTION "receive throughput class This field indicates the receive throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1." ::= { nvX25callEntry 11 } nvX25callNr OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "N(R) state variable This field indicates the sequence number of the next packet expected to be received on this logical channel. Initial status is 0." ::= { nvX25callEntry 12 } nvX25callNrunak OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "next N(R) to acknowlege This field indicates the sequence number of the packet that will next be acknowledged as received on this channel. By delaying acknowledgements of received packets,flow control of the sender is achieved. Initial status is 0." ::= { nvX25callEntry 13 } nvX25callNs OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "N(S) state variable This field indicates the sequence number of the next data packet to be sent on this logical channel. Initial status is 0." ::= { nvX25callEntry 14 } nvX25callNsunak OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "N(S) to be acknowledged This field indicates the sequence number of the data packet that is to be acknowledged next by the receiver. Initial status is 0." ::= { nvX25callEntry 15 } nvX25callNunakpac OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "number of unacknowledged data packets transmitted This field indicates the number of data packets that have been sent but that are not yet acknowledged by the receiver. Initial status is 0." ::= { nvX25callEntry 16 } nvX25callTxpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11), -- 1024 bytes b2048(12), -- 2048 bytes b4096(13) -- 4096 bytes } ACCESS read-only STATUS mandatory DESCRIPTION "transmit packet size This field indicates the largest packet that will be transmitted across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1." ::= { nvX25callEntry 17 } nvX25callTxwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-only STATUS mandatory DESCRIPTION "transmit window This field indicates the packet-level transmit window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2." ::= { nvX25callEntry 18 } nvX25callTxtput OBJECT-TYPE SYNTAX INTEGER { bps75(4), -- 75 bps (+1) bps150(5), -- 150 bps bps300(6), -- 300 bps bps600(7), -- 600 bps bps1200(8), -- 1200 bps bps2400(9), -- 2400 bps bps4800(10), -- 4800 bps bps9600(11), -- 9600 bps bps19200(12), -- 19200 bps bps48000(13) -- 48000 bps } ACCESS read-only STATUS mandatory DESCRIPTION "transmit throughput class This field indicates the transmit throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1." ::= { nvX25callEntry 19 } nvX25callNrxints OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of INTERRUPTs received Statistic is zeroed at startup time." ::= { nvX25callEntry 20 } nvX25callNrxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of packets received Statistic is zeroed at startup time." ::= { nvX25callEntry 21 } nvX25callNrxres OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of RESET REQUESTs received Statistic is zeroed at startup time." ::= { nvX25callEntry 22 } nvX25callNrxrnrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of RNRs received Statistic is zeroed at startup time." ::= { nvX25callEntry 23 } nvX25callNrxrrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of RRs received Statistic is zeroed at startup time." ::= { nvX25callEntry 24 } nvX25callNrxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of segments received Statistic is zeroed at startup time." ::= { nvX25callEntry 25 } nvX25callNtxints OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of INTERRUPTs sent Statistic is zeroed at startup time." ::= { nvX25callEntry 26 } nvX25callNtxpaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of packets sent Statistic is zeroed at startup time." ::= { nvX25callEntry 27 } nvX25callNtxsegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of segments sent Statistic is zeroed at startup time." ::= { nvX25callEntry 28 } nvX25callNtxres OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of RESET REQUESTs sent Statistic is zeroed at startup time." ::= { nvX25callEntry 29 } nvX25callNtxrrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of RRs sent .note RNRs are not transmitted by the X.25 interface component. .end note Statistic is zeroed at startup time." ::= { nvX25callEntry 30 } nvX25callDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvX25callEntry 31 } -- The records in this file -- configure instances of X.25 network interfaces. There -- is one record per instance of an X.25 network interface. nvX25conf OBJECT IDENTIFIER ::= { nevadaX25 3 } nvX25confMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvX25conf 1} nvX25confNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvX25conf 2} nvX25confTable OBJECT-TYPE SYNTAX SEQUENCE OF NvX25confEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25conf file." ::= { nvX25conf 3 } nvX25confEntry OBJECT-TYPE SYNTAX NvX25confEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25conf record." INDEX { nvX25confIndex } ::= { nvX25confTable 1 } NvX25confEntry ::= SEQUENCE { nvX25confIndex INTEGER, nvX25confNetname DisplayString, nvX25confApp INTEGER, nvX25confAutostart INTEGER, nvX25confDlnumber INTEGER, nvX25confLic INTEGER, nvX25confLoc INTEGER, nvX25confLpc INTEGER, nvX25confLtc INTEGER, nvX25confNic INTEGER, nvX25confNoc INTEGER, nvX25confNpc INTEGER, nvX25confNtc INTEGER, nvX25confAcktimer INTEGER, nvX25confAckthresh INTEGER, nvX25confNuireq INTEGER, nvX25confCugformat INTEGER, nvX25confDbmod INTEGER, nvX25confDefpsze INTEGER, nvX25confDefwsze INTEGER, nvX25confDeftput INTEGER, nvX25confDiagsupr INTEGER, nvX25confDirection INTEGER, nvX25confFlowneg INTEGER, nvX25confFstacc INTEGER, nvX25confUpdncmd INTEGER, nvX25confMaxpsze INTEGER, nvX25confMaxwsze INTEGER, nvX25confNetaddr DisplayString, nvX25confNettype INTEGER, nvX25confNetvrsion INTEGER, nvX25confPktbuf INTEGER, nvX25confStndbytim INTEGER, nvX25confRevacc INTEGER, nvX25confThruneg INTEGER, nvX25confTx0 INTEGER, nvX25confTx1 INTEGER, nvX25confTx2 INTEGER, nvX25confTx3 INTEGER, nvX25confXtend INTEGER, nvX25confNuirtg INTEGER, nvX25confIsdnaddr INTEGER } nvX25confIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of x25conf record" ::= { nvX25confEntry 1 } nvX25confNetname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Network Interface Name (netname) This field names an instance of the X.25 network interface. The name is used to identify the status records belonging to,and commands destined for,a particular instance of an X.25 network interface. Parameter is set during factory configuration." ::= { nvX25confEntry 2 } nvX25confApp OBJECT-TYPE SYNTAX INTEGER { dte(2), -- X.25 DTE (+1) dce(3), -- X.25 DCE trunkx(17), -- internodal trunk STE-X trunky(33) -- internodal trunk STE-Y } ACCESS read-write STATUS mandatory DESCRIPTION "Logical Interface Appearance (app) This field defines whether the component implements an X.25 interface,or an internal network trunk interface. In addition,it specifies the appearance of the interface. Default value is 1+1." ::= { nvX25confEntry 3 } nvX25confAutostart OBJECT-TYPE SYNTAX INTEGER { disable(1), -- (+1)network interface remains inactive after processor start-up enable(2), -- network interface attempts to establish a connection after processor start-up stndby(3), -- network interface establishes a connection when required v32(4), -- V.32 Modem Management dialin(5), -- dial in X.25 access concentrator bidir(6) -- allow bidirectional call on isdn port } ACCESS read-write STATUS mandatory DESCRIPTION "Auto X.25 Connection Startup (autostart) Default value is enable (1+1)." ::= { nvX25confEntry 4 } nvX25confDlnumber OBJECT-TYPE SYNTAX INTEGER (0..254) ACCESS read-write STATUS mandatory DESCRIPTION "Data Link Record (dlnumber) This field tells which of the DLCONF records in the SL component should be used by this net. Default value is 0." ::= { nvX25confEntry 5 } nvX25confLic OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Lowest Incoming SVC (lic) This field defines the lowest logical channel number (LCN) that is reserved for incoming calls. The range of logical channels from LIC to LIC+NIC-1 is reserved for incoming calls only. Default value is 1." ::= { nvX25confEntry 6 } nvX25confLoc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Lowest Outgoing SVC (loc) This field defines the lowest logical channel number (LCN) that is reserved for outgoing calls. The range of logical channels from LOC to LOC+NOC-1 is reserved for outgoing calls. Default value is 1." ::= { nvX25confEntry 7 } nvX25confLpc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Lowest PVC (lpc) This field describes the lowest logical channel number (LCN) in the range reserved for permanent virtual circuits (PVCs). Each of the channels should also be described in the X25PVC file,although if they are not they will be treated as PVC 'B' ends. Default value is 1." ::= { nvX25confEntry 8 } nvX25confLtc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Lowest Two-Way SVC (ltc) This field defines the lowest logical channel number (LCN) that may be used for both incoming calls and outgoing calls. The range of logical channels from LTC to LTC+NTC-1 is available for incoming and outgoing calls. Default value is 1." ::= { nvX25confEntry 9 } nvX25confNic OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Number of Incoming SVCs (nic) Default value is 0." ::= { nvX25confEntry 10 } nvX25confNoc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Number of Outgoing SVCs (noc) Default value is 0." ::= { nvX25confEntry 11 } nvX25confNpc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Number of PVCs (npc) Default value is 0." ::= { nvX25confEntry 12 } nvX25confNtc OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "Number of Two-Way SVCs (ntc) .nfl index .nfl capitalize .note The four ranges (LPC to LPC+NPC-1; LIC to LIC+NIC-1; LTC to LTC+NTC-1 ;and LOC to LOC+NOC-1) must not overlap. Futhermore,to avoid channel assignments collisions between DTEs and DCEs,it is recommended that the ranges be assigned thus: .br;For DTEs: LIC to LIC+NIC-1 < LTC to LTC+NTC-1 < LOC to LOC+NOC-1 .br;For DCEs: LIC to LIC+NIC-1 > LTC to LTC+NTC-1 > LOC to LOC+NOC-1 .end note .fl index .fl capitalize Default value is 28." ::= { nvX25confEntry 13 } nvX25confAcktimer OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Packet Acknowledgement Timer (acktimer) defines if t2 procedure is going to be used or not,and if it is going to be used what t2 time period will be in one tenths of a second. When t2 is zero,procedure to delay acknowledgement will not be performed. Default value is 0." ::= { nvX25confEntry 14 } nvX25confAckthresh OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Acknowledgement Threshold (ackthresh) acknowledgement threshold is used to acknowledge received data when certain number of data packets received,even if t2 timer has not expired. It is used only if t2 procedure is active,ie acktime is greater than zero. Default value is 0." ::= { nvX25confEntry 15 } nvX25confNuireq OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1)disable option yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION " NUI required " ::= { nvX25confEntry 16 } nvX25confCugformat OBJECT-TYPE SYNTAX INTEGER { basic(1) -- basic format (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Closed User Group Format (cugformat) This field indicates the format of closed user groups to which this interface subscribes. If the type is basic,the two digit format of the CUG facility request is used. If the type is extend the four digit format is used. Default value is basic (0+1)." ::= { nvX25confEntry 17 } nvX25confDbmod OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1)disable option yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION "D-Bit Modification (dbmod) This field enables d bit modification,where all data packets received from the link are assumed to have their delivery confirmation bit set,and all data packets transmitted have it reset. This is only present to cater to older network implementations that do not support delivery confirmation. Default value is 0." ::= { nvX25confEntry 18 } nvX25confDefpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11), -- 1024 bytes b2048(12), -- 2048 bytes b4096(13) -- 4096 bytes } ACCESS read-write STATUS mandatory DESCRIPTION "Default Packet Size (defpsze) This value sets the maximum packet size that can be transferred across the interface if packet size negotiation is disabled (flowneg = no/wsz) or is not requested. If flow control parameter negotiation is enabled (flowneg = yes/psz), this value is used as a starting point and may be negotiated, with the network, up to the value of maxpsze or down to the minimum value of 16. Values for packet size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/psz) AND if the requested values are between maxpsze and 16; in all other cases defpsze is used. Default value is 7+1." ::= { nvX25confEntry 19 } nvX25confDefwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Default Window Size (defwsze) This field sets the default value for the packet-level window size to be used when transferring packets if flow-control negotiation is disabled (flowneg = no/psz) or is not requested. If flow control parameter negotiation is enabled (flowneg=yes/wsz) then this value is used as a starting point and may be negotiated up to the maximum value set by maxwsze or down to a minimum value of 1. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Values for window size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/wsz) AND if the requested values are between maxwsze and 1; in all other cases defwsze is used. Default value is 2." ::= { nvX25confEntry 20 } nvX25confDeftput OBJECT-TYPE SYNTAX INTEGER { bps75(4), -- 75 bps (+1) bps150(5), -- 150 bps bps300(6), -- 300 bps bps600(7), -- 600 bps bps1200(8), -- 1200 bps bps2400(9), -- 2400 bps bps4800(10), -- 4800 bps bps9600(11), -- 9600 bps bps19200(12), -- 19200 bps bps48000(13) -- 48000 bps } ACCESS read-write STATUS mandatory DESCRIPTION "Default Throughput Class (deftput) This field sets the initial value to be used for the throughput class for the virtual call if throughput-class negotiation is disabled (thruneg = no) or is not requested. If throughput-class negotiation is enabled (thruneg = yes), this value is used as a starting point and may be negotiated, with the network,downwards. Values for throughputclass negotiation requested by components (eg ITI) are preferentially used if throughput-class negotiation is enabled (thruneg = yes) AND if the requested values are less than deftput; in all other cases deftput is used. .note;Although CCITT defines throughput classes in terms of a guaranteed data-rate,throughput classes are only implemented to the extent of arranging that packets of a higher throughput-class are serviced before those of a lower class. .end note Default value is 10+1." ::= { nvX25confEntry 21 } nvX25confDiagsupr OBJECT-TYPE SYNTAX INTEGER { no(1), -- disable option (+1) yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION "Diagnostic Packet Suppression (diagsupr) This field suppresses or enables the emission of DIAG diagnostic packets on some network protocol violations. Default value is no (0+1)." ::= { nvX25confEntry 22 } nvX25confDirection OBJECT-TYPE SYNTAX INTEGER { incoming(2), -- incoming only (+1) outgoing(3), -- outgoing only twoway(4) -- incoming and outgoing } ACCESS read-write STATUS mandatory DESCRIPTION "Call Direction Allowed (direction) This field indicates whether incoming and outgoing calls may be made over this interface. Default value is 3+1." ::= { nvX25confEntry 23 } nvX25confFlowneg OBJECT-TYPE SYNTAX INTEGER { no(1), -- disable packet size and window size negotiation (+1) yes(2), -- enable both packet and window sizes negotiation psn(3), -- enable packet size negotiation only wsn(4) -- enable window size negotiation only } ACCESS read-write STATUS mandatory DESCRIPTION "Flow Control Negotiation (flowneg) This field enables or disables negotiation of the flow control parameters,window size and packet size. Default value is no (0+1)." ::= { nvX25confEntry 24 } nvX25confFstacc OBJECT-TYPE SYNTAX INTEGER { no(1), -- disable option (+1) yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION "Fast Select Acceptance (fstacc) This field defines whether fast-select call requests are accepted. Default value is no (0+1)." ::= { nvX25confEntry 25 } nvX25confUpdncmd OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Link Up/Down Command This field is the string id of a script like command that may bring other links up or down when this link goes up or down format: netup-cmds>netdown-cmds netup-cmds: >netx.up/down... netdown-cmds: netx.up/down... example: >netw.up>netx.down>>nety.up>netz.down Default value is 0." ::= { nvX25confEntry 26 } nvX25confMaxpsze OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11), -- 1024 bytes b2048(12), -- 2048 bytes b4096(13) -- 4096 bytes } ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Packet Size (maxpsze) This value is the maximum acceptable value for the largest packet that can be sent across the interface. It is used as an upper-bound in packet size negotiation. Default value is 7+1." ::= { nvX25confEntry 27 } nvX25confMaxwsze OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Window Size (maxwsze) This field sets the maximum acceptable value for the packet-level window size to be used when transferring packets. It is used as a upper-bound in window size negotiation. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Default value is 2." ::= { nvX25confEntry 28 } nvX25confNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Calling Network Address (netaddr) If this field is not empty,the contents will be supplied as the calling network address in all call request packets transmitted,overriding anything supplied by the network user. " ::= { nvX25confEntry 29 } nvX25confNettype OBJECT-TYPE SYNTAX INTEGER { ccitt(1), -- pure CCITT X.25 (+1) datapac(2), -- Canadian Datapac transpac(3), -- French Transpac upss(4), -- Unextended PSS transb(6) -- French Transpac with truncated address } ACCESS read-write STATUS mandatory DESCRIPTION "X.25 Network Type (nettype) This field indicates the local variety of X.25 network and is primarily used to show how to interpret non-X.25 facilities of the local network.If nettype = unknown,non-X.25 facilities are passed transparently through a switch and ignored by a PAD. Default value is ccitt (0+1)." ::= { nvX25confEntry 30 } nvX25confNetvrsion OBJECT-TYPE SYNTAX INTEGER { v1976(77), -- original version (+1) v1980(81), -- first revision v1984(85) -- second revision } ACCESS read-write STATUS mandatory DESCRIPTION "Network Version (netvrsion) This field indicates which version of the X.25 recommendation to which the network interface should adhere. Default value is 80." ::= { nvX25confEntry 31 } nvX25confPktbuf OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Packet Buffer for Unbalance Window For unbalanced window enhancement,FRR will be generated when the number of unacknowledged transmitted packets reaches the value of the PKTBUF field. Default value is 0." ::= { nvX25confEntry 32 } nvX25confStndbytim OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Standby Timer (stndbytim) How many seconds the box will wait before dropping dialout connection when there is no vc connected. Default value is 30." ::= { nvX25confEntry 33 } nvX25confRevacc OBJECT-TYPE SYNTAX INTEGER { no(1), -- disable option (+1) yes(2) -- enable option (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reverse Charging Acceptance (revacc) In an X.25 DTE configuration,this field defines whether an incoming call indicating reverse charging is passed up to the Network Bus or rejected immediately. In an X.25 DCE configuration,it indicates whether a reverse charging call to the DTE should be passed through or cleared. In X.75 configurations this field has no significance. Default value is yes (1+1)." ::= { nvX25confEntry 34 } nvX25confThruneg OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1)disable option yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION "Throughput Class Negotiation (thruneg) This field enables or disables negotiation of throughput classes. Default value is (0+1)." ::= { nvX25confEntry 35 } nvX25confTx0 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Restart Request Timer (tx0) This field defines the value,in seconds,for restart indication timer#(T10 - DCE appearance) restart request timer####(T20 - DTE appearance) Recommended values are: T10 - 60s T20 - 180s Default value is 180." ::= { nvX25confEntry 36 } nvX25confTx1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Call Request Timer (tx1) This field defines the value,in seconds,for - incoming call timer######(T11 - DCE appearance) - call request timer#######(T21 - DTE appearance) Recommended values are: T11 - 180s T21 - 200s Default value is 200." ::= { nvX25confEntry 37 } nvX25confTx2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Reset Request Timer (tx2) This field defines the value,in seconds,for - reset indication timer###(T12 - DCE appearance) - reset request timer######(T22 - DTE appearance) Recommended values are: T12 - 60s T22 - 180s Default value is 180." ::= { nvX25confEntry 38 } nvX25confTx3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Clear Request Timer (tx3) This field defines the value,in seconds,for - clear indication timer###(T13 - DCE appearance) - clear request timer######(T23 - DTE appearance) Recommended values are: T13 - 60s T23 - 180s Default value is 180." ::= { nvX25confEntry 39 } nvX25confXtend OBJECT-TYPE SYNTAX INTEGER { no(1), -- disable option (+1) yes(2) -- enable option (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Extended Packet Numbering (xtend) This field allows the extended packet sequencing format (modulo 128) to be used. If this option is not selected,packet sequencing is modulo 8. Default value is no (0+1)." ::= { nvX25confEntry 40 } nvX25confNuirtg OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1)disable option yes(2) -- enable option } ACCESS read-write STATUS mandatory DESCRIPTION "If this field is set to yes,route is based on NUI using x25nuimap entries. " ::= { nvX25confEntry 42 } nvX25confIsdnaddr OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get calling address from ISDN? Default value is no (0+1)." ::= { nvX25confEntry 43 } -- The records in this file -- If the x25conf nuirtg field is set to Yes, then this -- file specifies the mapping between the NUI facility and -- the called address. nvX25nuimap OBJECT IDENTIFIER ::= { nevadaX25 4 } nvX25nuimapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvX25nuimap 1} nvX25nuimapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvX25nuimap 2} nvX25nuimapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvX25nuimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25nuimap file." ::= { nvX25nuimap 3 } nvX25nuimapEntry OBJECT-TYPE SYNTAX NvX25nuimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "x25nuimap record." INDEX { nvX25nuimapIndex } ::= { nvX25nuimapTable 1 } NvX25nuimapEntry ::= SEQUENCE { nvX25nuimapIndex INTEGER, nvX25nuimapNui DisplayString, nvX25nuimapCalled DisplayString, nvX25nuimapStatus INTEGER } nvX25nuimapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of x25nuimap record" ::= { nvX25nuimapEntry 1 } nvX25nuimapNui OBJECT-TYPE SYNTAX DisplayString (SIZE(0..58)) ACCESS read-write STATUS mandatory DESCRIPTION " NUI value to match " ::= { nvX25nuimapEntry 2 } nvX25nuimapCalled OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " Called Network Address " ::= { nvX25nuimapEntry 3 } nvX25nuimapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvX25nuimapEntry 4 } -- -- xbillconf filw -- nvXbillconf OBJECT IDENTIFIER ::= { nevadaX25 5 } nvXbillconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvXbillconf 1} nvXbillconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvXbillconf 2} nvXbillconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvXbillconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xbillconf file." ::= {nvXbillconf 3} nvXbillconfEntry OBJECT-TYPE SYNTAX NvXbillconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xbillconf record, indexed by record number" INDEX {nvXbillconfIndex} ::= {nvXbillconfTable 1 } NvXbillconfEntry ::= SEQUENCE { nvXbillconfIndex INTEGER, nvXbillconfEnable INTEGER, nvXbillconfSegsize INTEGER, nvXbillconfBilltime INTEGER } nvXbillconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of xbillconf record." ::= {nvXbillconfEntry 1 } nvXbillconfEnable OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable xbillstat accounting." ::= { nvXbillconfEntry 2 } nvXbillconfSegsize OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Segment size." ::= { nvXbillconfEntry 3 } nvXbillconfBilltime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time xbillstat records will remain open for." ::= { nvXbillconfEntry 4 } -- -- xnuaset file -- nvXnuaset OBJECT IDENTIFIER ::= { nevadaX25 6} nvXnuasetMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvXnuaset 1} nvXnuasetNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvXnuaset 2} nvXnuasetTable OBJECT-TYPE SYNTAX SEQUENCE OF NvXnuasetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xnuaset file." ::= {nvXnuaset 3} nvXnuasetEntry OBJECT-TYPE SYNTAX NvXnuasetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xnuaset record, indexed by record number" INDEX {nvXnuasetIndex} ::= {nvXnuasetTable 1 } NvXnuasetEntry ::= SEQUENCE { nvXnuasetIndex INTEGER, nvXnuasetSetname DisplayString, nvXnuasetNua1 DisplayString, nvXnuasetNua2 DisplayString, nvXnuasetNua3 DisplayString, nvXnuasetStatus INTEGER } nvXnuasetIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of xnuaset record." ::= {nvXnuasetEntry 1 } nvXnuasetSetname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Nuaset name" ::={ nvXnuasetEntry 2} nvXnuasetNua1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Nua1." ::={ nvXnuasetEntry 3} nvXnuasetNua2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Nua2." ::={ nvXnuasetEntry 4} nvXnuasetNua3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Nua3." ::={ nvXnuasetEntry 5} nvXnuasetStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvXnuasetEntry 10 } -- -- xbillstat file -- nvXbillstat OBJECT IDENTIFIER ::= { nevadaX25 7 } nvXbillstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvXbillstat 1} nvXbillstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvXbillstat 2} nvXbillstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvXbillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xbillstat file." ::= {nvXbillstat 3} nvXbillstatEntry OBJECT-TYPE SYNTAX NvXbillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "xbillstat record, indexed by record number" INDEX {nvXbillstatIndex} ::= {nvXbillstatTable 1 } NvXbillstatEntry ::= SEQUENCE { nvXbillstatIndex INTEGER, nvXbillstatNodeid INTEGER, nvXbillstatDate DisplayString, nvXbillstatTime DisplayString, nvXbillstatNuaset DisplayString, nvXbillstatDatarate DisplayString, nvXbillstatTxseg Counter, nvXbillstatRxseg Counter, nvXbillstatRxcallc Counter, nvXbillstatHostclr Counter, nvXbillstatNetclr Counter, nvXbillstatTxpak Counter, nvXbillstatRxpak Counter, nvXbillstatLess5 Counter, nvXbillstat5to10 Counter, nvXbillstat10to15 Counter, nvXbillstat15to20 Counter, nvXbillstatGrtr20 Counter, nvXbillstatClosed INTEGER } nvXbillstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of xbillstat record." ::= { nvXbillstatEntry 1 } nvXbillstatNodeid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Node Identifier" ::= { nvXbillstatEntry 2 } nvXbillstatDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "Date of Record Generation." ::= { nvXbillstatEntry 3 } nvXbillstatTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Time of Record Generation." ::= { nvXbillstatEntry 4 } nvXbillstatNuaset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Nuaset used to generate this record." ::= { nvXbillstatEntry 5 } nvXbillstatDatarate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "ISDN speed" ::= { nvXbillstatEntry 6 } nvXbillstatTxseg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmitted X.25 segments." ::= { nvXbillstatEntry 7 } nvXbillstatRxseg OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received X.25 segments." ::= { nvXbillstatEntry 8 } nvXbillstatRxcallc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of X.25 Calls Accepted by the Host." ::= { nvXbillstatEntry 9 } nvXbillstatHostclr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of X.25 Calls Cleared by the Host." ::= { nvXbillstatEntry 10 } nvXbillstatNetclr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of X.25 Calls Cleared by the Network." ::= { nvXbillstatEntry 11 } nvXbillstatTxpak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Transmitted X.25 packets." ::= { nvXbillstatEntry 12 } nvXbillstatRxpak OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of X.25 packets received." ::= { nvXbillstatEntry 13 } nvXbillstatLess5 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ISDN calls less that 5 secs." ::= { nvXbillstatEntry 14 } nvXbillstat5to10 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ISDN calls from 5 to 10 secs." ::= { nvXbillstatEntry 15 } nvXbillstat10to15 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ISDN calls from 10 to 15 secs." ::= { nvXbillstatEntry 16 } nvXbillstat15to20 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ISDN calls from 15 to 20 secs." ::= { nvXbillstatEntry 17 } nvXbillstatGrtr20 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ISDN calls greater than 20 secs." ::= { nvXbillstatEntry 18 } nvXbillstatClosed OBJECT-TYPE SYNTAX INTEGER { open(1), closed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Record open or closed." ::= { nvXbillstatEntry 19 } -- -- priconf file -- nvPriconf OBJECT IDENTIFIER ::= {nevadaIsdn 1} nvPriconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPriconf 1} nvPriconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPriconf 2} nvPriconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPriconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "priconf file." ::= {nvPriconf 3} nvPriconfEntry OBJECT-TYPE SYNTAX NvPriconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "priconf record, indexed by record number" INDEX {nvPriconfIndex} ::= {nvPriconfTable 1 } NvPriconfEntry ::= SEQUENCE { nvPriconfIndex INTEGER, nvPriconfPriname INTEGER, nvPriconfSwitch INTEGER, nvPriconfDsltype INTEGER, nvPriconfRouting INTEGER, nvPriconfDliname DisplayString, nvPriconfRsrcpool DisplayString, nvPriconfStatus INTEGER, nvPriconfBusyout --AF INTEGER, --AF nvPriconfEstlink --AF INTEGER, --AF nvPriconfDlirst --AF INTEGER, --AF nvPriconfDchrst --AF INTEGER, --AF nvPriconfNfasdch --SF INTEGER, nvPriconfNfasif INTEGER, nvPriconfNfasgrp --SF INTEGER, nvPriconfTsshift --SF INTEGER, nvPriconfX25diags --LB INTEGER, nvPriconfNumbtype INTEGER, nvPriconfNumbplan INTEGER, nvPriconfModemcap INTEGER, nvPriconfL1prot INTEGER, nvPriconfStandby INTEGER } nvPriconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of priconf record." ::= {nvPriconfEntry 1 } nvPriconfPriname OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI name." ::= {nvPriconfEntry 2 } nvPriconfSwitch OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) att4ess(17), att5ess(18), dms100(20), ntt(22), v1tr6(24), net5(27), vn3(33) } ACCESS read-write STATUS mandatory DESCRIPTION "Switch type." ::= {nvPriconfEntry 3 } nvPriconfDsltype OBJECT-TYPE SYNTAX INTEGER { switched(1) -- (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "DSL type." ::= {nvPriconfEntry 4 } nvPriconfRouting OBJECT-TYPE SYNTAX INTEGER { caladr(1), -- use called address (+1) subadr(2) -- use sub address in the packet } ACCESS read-write STATUS mandatory DESCRIPTION "Routing address." ::= {nvPriconfEntry 5 } nvPriconfDliname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "DLI name." ::= {nvPriconfEntry 6} nvPriconfRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "B channel pool name." ::= {nvPriconfEntry 7} nvPriconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvPriconfEntry 9 } nvPriconfBusyout OBJECT-TYPE --AF SYNTAX INTEGER{ --AF disable(1), --AF enable(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "specifies whether new calls should be rejected." ::= {nvPriconfEntry 10} --AF nvPriconfEstlink OBJECT-TYPE --AF SYNTAX INTEGER{ --AF disable(1), --AF enable(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Added T1/E1 L1/L2 recovery" --AF ::= {nvPriconfEntry 11} --AF nvPriconfDlirst OBJECT-TYPE --AF SYNTAX INTEGER{ --AF disable(1), --AF enable(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Added T1/E1 L1/L2 recovery" --AF ::= {nvPriconfEntry 12} --AF nvPriconfDchrst OBJECT-TYPE --AF SYNTAX INTEGER{ --AF disable(1), --AF enable(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Added T1/E1 L1/L2 recovery" --AF ::= {nvPriconfEntry 13} --AF nvPriconfNfasdch OBJECT-TYPE SYNTAX INTEGER { none(1), --No NFAS interface configured primary(2), --Primary NFAS interface backup(3) --Secondary NFAS interface } ACCESS read-write STATUS mandatory DESCRIPTION "NFAS type primary or backup 1- No NFAS interface configured 2- Primary NFAS interface 3- Secondary NFAS interface " ::= {nvPriconfEntry 14} nvPriconfNfasif OBJECT-TYPE SYNTAX INTEGER (0..9) ACCESS read-write STATUS mandatory DESCRIPTION "NFAS Interface numbers" ::= { nvPriconfEntry 15 } nvPriconfNfasgrp OBJECT-TYPE SYNTAX INTEGER (0..4) ACCESS read-write STATUS mandatory DESCRIPTION "NFAS group numbers" ::= {nvPriconfEntry 16} nvPriconfTsshift OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Run T1 timeslot format on E1 lines" ::= {nvPriconfEntry 17} nvPriconfX25diags OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "String defining X.25 diagnostic lookup table" ::= {nvPriconfEntry 18} nvPriconfNumbtype OBJECT-TYPE SYNTAX INTEGER { unknown(2), internat(3), national(4), netspec(5), subscrib(6), abbrev(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of Number." ::= {nvPriconfEntry 19} nvPriconfNumbplan OBJECT-TYPE SYNTAX INTEGER { unknown(2), isdn(3), data(5), telex(6), natstand(10), private(11) } ACCESS read-write STATUS mandatory DESCRIPTION "Numbering plan." ::= {nvPriconfEntry 20} nvPriconfModemcap OBJECT-TYPE SYNTAX INTEGER { speech(1), audio3k(2), audio7k(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Speech or audio(3.1 or 7 kHz)." ::= {nvPriconfEntry 21} nvPriconfL1prot OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "L1 protocol enabled." ::= {nvPriconfEntry 22} nvPriconfStandby OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "standby enabled." ::= {nvPriconfEntry 23} -- -- pristat file -- nvPristat OBJECT IDENTIFIER ::= {nevadaIsdn 2} nvPristatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPristat 1} nvPristatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPristat 2} nvPristatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPristatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pristat file." ::= {nvPristat 3} nvPristatEntry OBJECT-TYPE SYNTAX NvPristatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pristat record, indexed by record number" INDEX {nvPristatIndex} ::= {nvPristatTable 1 } NvPristatEntry ::= SEQUENCE { nvPristatIndex INTEGER, nvPristatPriname INTEGER, nvPristatStatus INTEGER, nvPristatCallrecvs Counter, nvPristatCallaceps Counter, nvPristatCallrejs Counter, nvPristatCallinrels Counter, nvPristatCalloutrels Counter, nvPristatEstreq --AF Counter, --AF nvPristatDlirst --AF Counter, --AF nvPristatDchrst --AF Counter, --AF nvPristatCallcur --AF Counter, --AF nvPristatDchanup --AF Counter, --AF nvPristatDtreset DisplayString, nvPristatNcurincom Counter, nvPristatNcuroutgo Counter, nvPristatNrxsetup Counter, nvPristatMaxrsetup Counter, nvPristatNrxsetupa Counter, nvPristatNtxconn Counter, nvPristatNtxbusy Counter, nvPristatNtxsetup Counter, nvPristatMaxtsetup Counter, nvPristatNtxsetupa Counter, nvPristatNrxconn Counter, nvPristatNrxbusy Counter, nvPristatNnoanswer Counter, nvPristatMaxincom Counter, nvPristatMaxoutgo Counter, nvPristatCallsent Counter, nvPristatCallconn Counter, nvPristatCallfail Counter } nvPristatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pristat record." ::= {nvPristatEntry 1 } nvPristatPriname OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI name." ::= {nvPristatEntry 2 } nvPristatStatus OBJECT-TYPE SYNTAX INTEGER { down(1), -- interface down (+1) up(2) -- interface up } ACCESS read-only STATUS mandatory DESCRIPTION "interface status." ::= {nvPristatEntry 3 } nvPristatCallrecvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of calls received." ::= {nvPristatEntry 4 } nvPristatCallaceps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of incoming connections." ::= {nvPristatEntry 5 } nvPristatCallrejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of incoming calls rejected." ::= {nvPristatEntry 6 } nvPristatCallinrels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of inside released connections." ::= {nvPristatEntry 7 } nvPristatCalloutrels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of outside released connections." ::= {nvPristatEntry 8 } nvPristatEstreq OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of established requests." --AF ::= {nvPristatEntry 9 } --AF nvPristatDlirst OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of dli chip resets." --AF ::= {nvPristatEntry 10 } --AF nvPristatDchrst OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of d-channel resets." --AF ::= {nvPristatEntry 11 } --AF nvPristatCallcur OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of current calls." --AF ::= {nvPristatEntry 12 } --AF nvPristatDchanup OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number in seconds d channel comes up." --AF ::= {nvPristatEntry 13 } --AF nvPristatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= {nvPristatEntry 14 } nvPristatNcurincom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Current Number of simulataneous incoming calls." ::= {nvPristatEntry 15 } nvPristatNcuroutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Current Number of simulataneous outgoing calls." ::= {nvPristatEntry 16 } nvPristatNrxsetup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of SETUP messages received." ::= {nvPristatEntry 17 } nvPristatMaxrsetup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Max number of outstanding SETUP messages for dial-in." ::= {nvPristatEntry 18 } nvPristatNrxsetupa OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of aborted rx SETUP messages." ::= {nvPristatEntry 19 } nvPristatNtxconn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of CONNECT messages set for dial-in." ::= {nvPristatEntry 20 } nvPristatNtxbusy OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial-in fail due to busy." ::= {nvPristatEntry 21 } nvPristatNtxsetup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of SEUTP messages sent for dial-out." ::= {nvPristatEntry 22 } nvPristatMaxtsetup OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Max number of outstanding tx SETUP messages." ::= {nvPristatEntry 23 } nvPristatNtxsetupa OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of aborted tx SETUP messages." ::= {nvPristatEntry 24 } nvPristatNrxconn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of CONNECT recieved for dial-in." ::= {nvPristatEntry 25 } nvPristatNrxbusy OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of dial-out fails due to busy." ::= {nvPristatEntry 26 } nvPristatNnoanswer OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of fail no answer for dialout." ::= {nvPristatEntry 27 } nvPristatMaxincom OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of simultaneous incoming calls." ::= {nvPristatEntry 28 } nvPristatMaxoutgo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of simultaneous outgoing calls." ::= {nvPristatEntry 29 } nvPristatCallsent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing calls sent." ::= {nvPristatEntry 30 } nvPristatCallconn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing calls connected." ::= {nvPristatEntry 31 } nvPristatCallfail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing calls failed." ::= {nvPristatEntry 32 } -- -- pricstat file -- nvPricstat OBJECT IDENTIFIER ::= {nevadaIsdn 3} nvPricstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPricstat 1} nvPricstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPricstat 2} nvPricstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPricstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricstat file." ::= {nvPricstat 3} nvPricstatEntry OBJECT-TYPE SYNTAX NvPricstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricstat record, indexed by record number" INDEX {nvPricstatIndex} ::= {nvPricstatTable 1 } NvPricstatEntry ::= SEQUENCE { nvPricstatIndex INTEGER, nvPricstatSeqno INTEGER, nvPricstatCallid DisplayString, nvPricstatRate DisplayString, nvPricstatState INTEGER, nvPricstatPriname INTEGER, nvPricstatCalldir INTEGER, nvPricstatContype INTEGER, nvPricstatL1prot INTEGER, nvPricstatCallingno DisplayString, nvPricstatCalledno DisplayString, nvPricstatBchanl DisplayString } nvPricstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pricstat record." ::= {nvPricstatEntry 1} nvPricstatSeqno OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "sequence number." ::= {nvPricstatEntry 2} nvPricstatCallid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Call ID number." ::= {nvPricstatEntry 3} nvPricstatRate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "data rate used." ::= {nvPricstatEntry 4} nvPricstatState OBJECT-TYPE SYNTAX INTEGER { disc(1), -- not connected nor ready for connection (+1) idle(2), -- not connected but ready for connection waiting(3), -- connecting active(4), -- connected clearing(5) -- disconnecting } ACCESS read-only STATUS mandatory DESCRIPTION "channel state." ::= {nvPricstatEntry 5} nvPricstatPriname OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI interface name." ::= {nvPricstatEntry 6} nvPricstatCalldir OBJECT-TYPE SYNTAX INTEGER { none(1), -- no call (+1) out(2), -- outgoing call in(3) -- incoming call } ACCESS read-only STATUS mandatory DESCRIPTION "call direction." ::= {nvPricstatEntry 7} nvPricstatContype OBJECT-TYPE SYNTAX INTEGER { audio(1), -- audio connection (+1) data(9), -- data connection video(25), -- video connection noType(256) -- no connection type (actual db value) } ACCESS read-only STATUS mandatory DESCRIPTION "connectuon type." ::= {nvPricstatEntry 8} nvPricstatL1prot OBJECT-TYPE SYNTAX INTEGER { none(1), -- no protocol (+1) v110(2), -- v1.10 protocol g711-M(3), --AF g711-A(4), --AF g712(5), --AF h221(6), --AF nON-CCITT(8), --AF v120(9), -- v1.20 protocol x31(10) --AF } ACCESS read-only STATUS mandatory DESCRIPTION "layer 1 protocol." ::= {nvPricstatEntry 9} nvPricstatCallingno OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling number." ::= {nvPricstatEntry 10} nvPricstatCalledno OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Called number." ::= {nvPricstatEntry 11} nvPricstatBchanl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "B channel used." ::= {nvPricstatEntry 12} -- -- pridstat file -- nvPridstat OBJECT IDENTIFIER ::= {nevadaIsdn 4} nvPridstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPridstat 1} nvPridstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPridstat 2} nvPridstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPridstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pridstat file." ::= {nvPridstat 3} nvPridstatEntry OBJECT-TYPE SYNTAX NvPridstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pridstat record, indexed by record number" INDEX {nvPridstatIndex} ::= {nvPridstatTable 1 } NvPridstatEntry ::= SEQUENCE { nvPridstatIndex INTEGER, nvPridstatPriname INTEGER, nvPridstatEventno INTEGER, nvPridstatProtlayer INTEGER, nvPridstatTime INTEGER, nvPridstatDate INTEGER } nvPridstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pridstat record." ::= {nvPridstatEntry 1} nvPridstatPriname OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI interface name." ::= {nvPridstatEntry 2} nvPridstatEventno OBJECT-TYPE SYNTAX INTEGER { -- from p_prihost.h Debug Cause Log channelMissing(114), outcallEstablished(115), noTimeslotInfoRcvd(116), channelNotFound(117), invalidEvent(118), unknownEvent(119), noChannelAvail(120), directoryNumMismatch(121), originatorNumMismatch(122), mandatoryInfoElemMissing(123), calledNumBusy(124), callingNumBusy(125), incallEstablished(126), dchannelConnect(127), channelCollision(128), noTimeslotAvailable(129), reassignTimeslots(130), undefinedString(255), undefinedEvent(253) } ACCESS read-only STATUS mandatory DESCRIPTION "event number." ::= {nvPridstatEntry 3} nvPridstatProtlayer OBJECT-TYPE SYNTAX INTEGER { lapd(1), -- (+1) l3err(2), l3caus(3), l3call(4), ckRtr(5) } ACCESS read-only STATUS mandatory DESCRIPTION "layer where event occurred." ::= {nvPridstatEntry 4} nvPridstatTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "time when event occurred." ::= {nvPridstatEntry 5} nvPridstatDate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "date where event occurred." ::= {nvPridstatEntry 6} -- -- pricuconf file -- nvPricuconf OBJECT IDENTIFIER ::= { nevadaIsdn 5 } nvPricuconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPricuconf 1} nvPricuconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPricuconf 2} nvPricuconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPricuconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricuconf file." ::= {nvPricuconf 3} nvPricuconfEntry OBJECT-TYPE SYNTAX NvPricuconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricuconf record, indexed by record number" INDEX {nvPricuconfIndex} ::= {nvPricuconfTable 1 } NvPricuconfEntry ::= SEQUENCE { nvPricuconfIndex INTEGER, nvPricuconfThresh1 INTEGER, nvPricuconfThresh2 INTEGER, nvPricuconfThresh3 INTEGER, nvPricuconfThresh4 INTEGER, nvPricuconfInterval INTEGER, nvPricuconfStatus INTEGER } nvPricuconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pricuconf record." ::= {nvPricuconfEntry 1 } nvPricuconfThresh1 OBJECT-TYPE SYNTAX INTEGER (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold." ::= {nvPricuconfEntry 2 } nvPricuconfThresh2 OBJECT-TYPE SYNTAX INTEGER (31..60) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold." ::= {nvPricuconfEntry 3 } nvPricuconfThresh3 OBJECT-TYPE SYNTAX INTEGER (61..90) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold." ::= {nvPricuconfEntry 4 } nvPricuconfThresh4 OBJECT-TYPE SYNTAX INTEGER (91..120) ACCESS read-write STATUS mandatory DESCRIPTION "Threshold." ::= {nvPricuconfEntry 5 } nvPricuconfInterval OBJECT-TYPE SYNTAX INTEGER (5..60) ACCESS read-write STATUS mandatory DESCRIPTION "Time period." ::= {nvPricuconfEntry 6 } nvPricuconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvPricuconfEntry 7 } -- -- pricustat file -- nvPricustat OBJECT IDENTIFIER ::= { nevadaIsdn 6 } nvPricustatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPricustat 1} nvPricustatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPricustat 2} nvPricustatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPricustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricustat file." ::= {nvPricustat 3} nvPricustatEntry OBJECT-TYPE SYNTAX NvPricustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pricustat record, indexed by record number" INDEX {nvPricustatIndex} ::= {nvPricustatTable 1 } NvPricustatEntry ::= SEQUENCE { nvPricustatIndex INTEGER, nvPricustatThresh1 INTEGER, nvPricustatCounter1 INTEGER, nvPricustatThresh2 INTEGER, nvPricustatCounter2 INTEGER, nvPricustatThresh3 INTEGER, nvPricustatCounter3 INTEGER, nvPricustatThresh4 INTEGER, nvPricustatCounter4 INTEGER, nvPricustatResettime DisplayString } nvPricustatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pricustat record." ::= {nvPricustatEntry 1 } nvPricustatThresh1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of calls received." ::= {nvPricustatEntry 2 } nvPricustatCounter1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of calls received." ::= {nvPricustatEntry 3 } nvPricustatThresh2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming connections." ::= {nvPricustatEntry 4 } nvPricustatCounter2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming connections." ::= {nvPricustatEntry 5 } nvPricustatThresh3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming calls rejected." ::= {nvPricustatEntry 6 } nvPricustatCounter3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming calls rejected." ::= {nvPricustatEntry 7 } nvPricustatThresh4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of inside released connections." ::= {nvPricustatEntry 8 } nvPricustatCounter4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of inside released connections." ::= {nvPricustatEntry 9 } nvPricustatResettime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling number." ::= {nvPricustatEntry 10 } -- -- Nevada PPP files -- nvPppstat OBJECT IDENTIFIER ::= { nevadaPpp 1 } nvPppstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvPppstat 1} nvPppstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvPppstat 2} nvPppstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPppstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pppstat file." ::= { nvPppstat 3 } nvPppstatEntry OBJECT-TYPE SYNTAX NvPppstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "pppstat record." INDEX { nvPppstatIndex } ::= { nvPppstatTable 1 } NvPppstatEntry ::= SEQUENCE { nvPppstatIndex INTEGER, nvPppstatName DisplayString, nvPppstatPppAdminS INTEGER, nvPppstatLcpOperS INTEGER, nvPppstatIpcpOperS INTEGER, nvPppstatInOctets Counter, nvPppstatInPkts Counter, nvPppstatInDiscard Counter, nvPppstatInError Counter, nvPppstatInEch Counter, nvPppstatInEchRp Counter, nvPppstatInDiscRq Counter, nvPppstatUnKnwnPr Counter, nvPppstatOutOctets Counter, nvPppstatOutPkts Counter, nvPppstatOutDiscrd Counter, nvPppstatOutErrors Counter, nvPppstatOutEch Counter, nvPppstatOutEchRp Counter, nvPppstatOutDiscRq Counter, nvPppstatCcpOperS --AF INTEGER, --AF nvPppstatComprot --AF INTEGER, --AF nvPppstatUserName --AF DisplayString, --AF nvPppstatIpAddr --AF DisplayString, --AF nvPppstatBundleId --AF INTEGER, --AF nvPppstatIpcp --AF INTEGER, --AF nvPppstatMultilink --AF INTEGER, --AF nvPppstatTnnlState --AF INTEGER, --AF nvPppstatTnnlId --AF INTEGER, --AF nvPppstatCallId --AF INTEGER, --AF nvPppstatOutCmPcnt --AF Counter, --AF nvPppstatInCmPcnt --AF Counter, --AF nvPppstatOutExpnds --AF Counter, --AF nvPppstatDtreset DisplayString, nvPppstatRealm DisplayString } nvPppstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of pppstat record" ::= { nvPppstatEntry 1 } nvPppstatName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "statistics Name (name) statistics name and number (ie,'ps1') " ::= { nvPppstatEntry 2 } nvPppstatPppAdminS OBJECT-TYPE SYNTAX INTEGER { down(1), -- protocol status is down (+1) up(2) -- protocol status is up } ACCESS read-only STATUS mandatory DESCRIPTION "ppp admin status (pppAdminS) lcp link Admin Status down/up. " ::= { nvPppstatEntry 3 } nvPppstatLcpOperS OBJECT-TYPE SYNTAX INTEGER { down(1), -- protocol status is down (+1) up(2) -- protocol status is up } ACCESS read-only STATUS mandatory DESCRIPTION "lcp operation status (lcpOperS) lcp link Admin Status down/up. " ::= { nvPppstatEntry 4 } nvPppstatIpcpOperS OBJECT-TYPE SYNTAX INTEGER { down(1), -- protocol status is down (+1) up(2) -- protocol status is up } ACCESS read-only STATUS mandatory DESCRIPTION "ipcp operation status (ipcpOperS) ipcp link status down/up. " ::= { nvPppstatEntry 5 } nvPppstatInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time." ::= { nvPppstatEntry 6 } nvPppstatInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time." ::= { nvPppstatEntry 7 } nvPppstatInDiscard OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discarded good packets (InDiscard) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time." ::= { nvPppstatEntry 8 } nvPppstatInError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bad packets received (InError) The total number of frames received due to crc,format etc. Statistic is zeroed at startup time." ::= { nvPppstatEntry 9 } nvPppstatInEch OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time." ::= { nvPppstatEntry 10 } nvPppstatInEchRp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time." ::= { nvPppstatEntry 11 } nvPppstatInDiscRq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time." ::= { nvPppstatEntry 12 } nvPppstatUnKnwnPr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time." ::= { nvPppstatEntry 13 } nvPppstatOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time." ::= { nvPppstatEntry 14 } nvPppstatOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time." ::= { nvPppstatEntry 15 } nvPppstatOutDiscrd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time." ::= { nvPppstatEntry 16 } nvPppstatOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time." ::= { nvPppstatEntry 17 } nvPppstatOutEch OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time." ::= { nvPppstatEntry 18 } nvPppstatOutEchRp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time." ::= { nvPppstatEntry 19 } nvPppstatOutDiscRq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time." ::= { nvPppstatEntry 20 } nvPppstatUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "authenticated username of remote user (username)." ::= { nvPppstatEntry 21 } nvPppstatIpAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "IP address in use on this PPP link (ipaddr)." ::= { nvPppstatEntry 22 } nvPppstatBundleId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bundle identifier (mpstat record id) of multilink PPP bundle in which this link is being used if nvPppstatMultilink is yes (bundleid)." ::= { nvPppstatEntry 23 } nvPppstatIpcp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ipcp record number used for this link." ::= { nvPppstatEntry 24 } nvPppstatMultilink OBJECT-TYPE SYNTAX INTEGER { no(1), -- not used in a multilink bundle yes(2) -- used in a multilink bundle } ACCESS read-only STATUS mandatory DESCRIPTION "Set to yes if this LCP is in use in a multilink bundle." ::= { nvPppstatEntry 25 } nvPppstatCcpOperS OBJECT-TYPE --AF SYNTAX INTEGER { --AF down(1), --AF (+1) protocol status is down up(2) --AF protocol status is up } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "ccp Operation status." --AF ::= { nvPppstatEntry 26 } --AF nvPppstatComprot OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) no compession stacopt4(2), --AF stac LZS enhanced mode stacopt3(3), --AF stac LZS sequence numbers mppc(4) --AF Microsoft point to point compression } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Compression protocol in use." --AF ::= { nvPppstatEntry 27 } --AF nvPppstatTnnlState OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) session is not being tunneled l2tpwt(2), --AF waiting for an l2tp session to be established l2tpcn(3) --AF l2tp session has been established } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "State of a tunneled session." --AF ::= { nvPppstatEntry 28 } --AF nvPppstatTnnlId OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Tunnel ID assosiated with the tunneled session." --AF ::= { nvPppstatEntry 29 } --AF nvPppstatCallId OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Call ID assosiated with the tunneled session." --AF ::= { nvPppstatEntry 30 } --AF nvPppstatOutCmPcnt OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Percent compression on tx." --AF ::= { nvPppstatEntry 31 } --AF nvPppstatInCmPcnt OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Percent compression on rx." --AF ::= { nvPppstatEntry 32 } --AF nvPppstatOutExpnds OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of packets expanded by compression." --AF ::= { nvPppstatEntry 33 } --AF nvPppstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvPppstatEntry 34 } nvPppstatRealm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "First 64 characters of the realm if parsing NAI." ::= { nvPppstatEntry 35 } -- -- lcpconf file -- nvLcpconf OBJECT IDENTIFIER ::= { nevadaPpp 2 } nvLcpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvLcpconf 1} nvLcpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvLcpconf 2} nvLcpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvLcpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "lcpconf file." ::= { nvLcpconf 3 } nvLcpconfEntry OBJECT-TYPE SYNTAX NvLcpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "lcpconf record." INDEX { nvLcpconfIndex } ::= { nvLcpconfTable 1 } NvLcpconfEntry ::= SEQUENCE { nvLcpconfIndex INTEGER, nvLcpconfPort DisplayString, nvLcpconfRsrcpool DisplayString, nvLcpconfItiudata DisplayString, nvLcpconfAccm DisplayString, nvLcpconfMode INTEGER, nvLcpconfPfc INTEGER, nvLcpconfAcfc INTEGER, nvLcpconfRestartim INTEGER, nvLcpconfMaxterm INTEGER, nvLcpconfMaxcfg INTEGER, nvLcpconfMaxnak INTEGER, nvLcpconfInactivty INTEGER, nvLcpconfAuth INTEGER, nvLcpconfSecurtmr INTEGER, nvLcpconfChalint INTEGER, nvLcpconfMultilink INTEGER, nvLcpconfpppTrapEn INTEGER, nvLcpconfComprot1 --AF INTEGER, --AF nvLcpconfComprot2 --AF INTEGER, --AF nvLcpconfUsrdelim --LB DisplayString, --LB nvLcpconfNaifwd INTEGER, nvLcpconfTxmaxbuf --SF INTEGER, --SF nvLcpconfStatus INTEGER } nvLcpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of lcpconf record" ::= { nvLcpconfEntry 1 } nvLcpconfPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Link Name (port). " ::= { nvLcpconfEntry 2 } nvLcpconfRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource Poolname. " ::= { nvLcpconfEntry 3 } nvLcpconfItiudata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "iti user data (itiudata) " ::= { nvLcpconfEntry 4 } nvLcpconfAccm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Async. Control Char Map (accm) " ::= { nvLcpconfEntry 5 } nvLcpconfMode OBJECT-TYPE SYNTAX INTEGER { sync(1), -- syncchronous (+1) async(2), -- asynchronous tpp(3), x25(4) } ACCESS read-write STATUS mandatory DESCRIPTION "interface type (mode) Default value is psync (0+1)." ::= { nvLcpconfEntry 6 } nvLcpconfPfc OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "protocol field compression (pfc) Default value is yes (1+1)." ::= { nvLcpconfEntry 7 } nvLcpconfAcfc OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "addr. ctrl fields comp. (acfc) Default value is yes (1+1)." ::= { nvLcpconfEntry 8 } nvLcpconfRestartim OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "lcp reqests restart (restartim) Default value is 3." ::= { nvLcpconfEntry 9 } nvLcpconfMaxterm OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "terminate request count (maxterm) Default value is 2." ::= { nvLcpconfEntry 10 } nvLcpconfMaxcfg OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "configure request count (maxcfg) Default value is 10." ::= { nvLcpconfEntry 11 } nvLcpconfMaxnak OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "config-Nak send (maxnak) Default value is 10." ::= { nvLcpconfEntry 12 } nvLcpconfInactivty OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "nbus call inact timer (inactivty) Default value is 0." ::= { nvLcpconfEntry 13 } nvLcpconfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) pap(2), chap(3), either(4), telno(5), prxypap(6), prxychap(7), prxyeith(8) } ACCESS read-write STATUS mandatory DESCRIPTION "ppp authentication. none, 1, Disable authentication pap, 2, Password Authentication Protocol chap, 3, Challenge Handshake Authentication Protocol either, 4, First use CHAP, then try PAP telno, 5, Telephone Number Authentication prxypap, 6, Proxy PAP partial authentication prxychap, 7, Proxy CHAP partial authentication prxyeith, 8 Proxy PAP or CHAP partial authentication " ::= { nvLcpconfEntry 14 } nvLcpconfSecurtmr OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "security timer." ::= { nvLcpconfEntry 15 } nvLcpconfChalint OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "rechallenge interval." ::= { nvLcpconfEntry 16 } nvLcpconfMultilink OBJECT-TYPE SYNTAX INTEGER { no(1), -- not available for use in a multilink bundle yes(2) -- may be used in a multilink bundle } ACCESS read-write STATUS mandatory DESCRIPTION "If yes this LCP is available for use in a multilink bundle." ::= { nvLcpconfEntry 17 } nvLcpconfpppTrapEn OBJECT-TYPE SYNTAX INTEGER { no(1), -- traps not sent for PPP events yes(2) -- traps sent for PPP events } ACCESS read-write STATUS mandatory DESCRIPTION "If yes then trap generation is enabled for LCP state changes and other PPP events." ::= { nvLcpconfEntry 18 } nvLcpconfComprot1 OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) no compession stacopt4(2), --AF stac LZS enhanced mode stacopt3(3), --AF stac LZS sequence numbers mppc(4) --AF Microsoft point to point compression } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "First choice for compression." --AF ::= { nvLcpconfEntry 19 } --AF nvLcpconfComprot2 OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) no compession stacopt4(2), --AF stac LZS enhanced mode stacopt3(3), --AF stac LZS sequence numbers mppc(4) --AF Microsoft point to point compression } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Second choice for compression."--AF ::= { nvLcpconfEntry 20 } --AF nvLcpconfUsrdelim OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "Delimiter for NAI parsing" ::= { nvLcpconfEntry 21 } nvLcpconfNaifwd OBJECT-TYPE SYNTAX INTEGER { useronly(1), fullnai(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Forward full NAI or only username" ::= { nvLcpconfEntry 22 } nvLcpconfTxmaxbuf OBJECT-TYPE SYNTAX INTEGER(50..500) ACCESS read-write STATUS mandatory DESCRIPTION "transmit buffering" ::= { nvLcpconfEntry 23 } nvLcpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvLcpconfEntry 26 } -- -- MPCONF -- nvMpconf OBJECT IDENTIFIER ::= { nevadaPpp 3 } nvMpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvMpconf 1} nvMpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvMpconf 2} nvMpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvMpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpconf file." ::= { nvMpconf 3 } nvMpconfEntry OBJECT-TYPE SYNTAX NvMpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpconf record." INDEX { nvMpconfIndex } ::= { nvMpconfTable 1 } NvMpconfEntry ::= SEQUENCE { nvMpconfIndex INTEGER, nvMpconfProfile DisplayString, nvMpconfAdminS INTEGER, nvMpconfTrapEnable INTEGER, nvMpconfLnkLimit INTEGER, nvMpconfTxFrag INTEGER, nvMpconfTxFragMin INTEGER, nvMpconfTxShortSeq INTEGER, nvMpconfComprot1 --AF INTEGER, --AF nvMpconfComprot2 --AF INTEGER, --AF nvMpconfComptype --AF INTEGER, --AF nvMpconfStatus INTEGER } nvMpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Mpconf record." ::= { nvMpconfEntry 1 } nvMpconfProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Must match lcp record itiudata (async ppp) or rsrcpool (sync ppp) field for multilink to operate on the lcp." ::= { nvMpconfEntry 2 } nvMpconfAdminS OBJECT-TYPE SYNTAX INTEGER { enable(1), -- +1 enable multilink, default disable(2) -- +1 disable multilink } ACCESS read-write STATUS mandatory DESCRIPTION "If set to enable no multilink sessions can be started from LCP records which match the nvMpconfProfile of this record." ::= { nvMpconfEntry 3 } nvMpconfTrapEnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- +1 disable multilink traps, default yes(2) -- +1 enable multilink traps } ACCESS read-write STATUS mandatory DESCRIPTION "If set to yes Nevada enterprise traps will be generated for certain events occuring relative to multilink bundles. For example, when a new link joins a multilink bundle. No traps for multilink are generated if set to no." ::= { nvMpconfEntry 4 } nvMpconfLnkLimit OBJECT-TYPE SYNTAX INTEGER (2..16) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of links permitted in multilink bundles created from this mpconf record." ::= { nvMpconfEntry 5 } nvMpconfTxFrag OBJECT-TYPE SYNTAX INTEGER { no(1), -- +1 no fragmentation yes(2) -- +1 fragment, default } ACCESS read-write STATUS mandatory DESCRIPTION "When set to yes PPP datagrams larger than nvMpconfTxFragMin bytes will be fragmented before transmission on the links in the bundle." ::= { nvMpconfEntry 6 } nvMpconfTxFragMin OBJECT-TYPE SYNTAX INTEGER (256..1500) ACCESS read-write STATUS mandatory DESCRIPTION "PPP datagrams smaller than mvMpconfTxFragMin bytes will not be fragmented before transmission regardless of the setting of nvMpconfTxFrag." ::= { nvMpconfEntry 7 } nvMpconfTxShortSeq OBJECT-TYPE SYNTAX INTEGER { no(1), -- +1 attempt to negotiate short sequence numbers yes(2) -- +1 do not allow negotiation of short sequence numbers, default } ACCESS read-write STATUS mandatory DESCRIPTION "When set to yes the Nevada will attempt to negotiate the short sequence number option on multilink bundles created from this record. When set to no the Nevada will reject attempts to negotiate short sequence numbers." ::= { nvMpconfEntry 8 } nvMpconfComprot1 OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) no compession stacopt4(2), --AF stac LZS enhanced mode stacopt3(3), --AF stac LZS sequence numbers mppc(4), --AF Microsoft point to point compression stacopt0(5), --No history, no sequence Number any(6) --any supported protocol will do } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "First choice for compression." --AF ::= { nvMpconfEntry 9 } --AF nvMpconfComprot2 OBJECT-TYPE --AF SYNTAX INTEGER { --AF none(1), --AF (+1) no compession stacopt4(2), --AF stac LZS enhanced mode stacopt3(3), --AF stac LZS sequence numbers mppc(4), --AF Microsoft point to point compression stacopt0(5), -- No history, no sequence number any(6) -- any supported protocol will do } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Second choice for compression."--AF ::= { nvMpconfEntry 10 } --AF nvMpconfComptype OBJECT-TYPE --AF SYNTAX INTEGER { --AF bundle(1), --AF (+1) use multilink bundle compression lnkbylnk(2) --AF stac use link by link compression } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Second choice for compression."--AF ::= { nvMpconfEntry 11 } --AF nvMpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvMpconfEntry 24 } -- -- MPSTAT -- nvMpstatPart1 OBJECT IDENTIFIER ::= { nevadaPpp 4 } nvMpstatPart1MaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvMpstatPart1 1} nvMpstatPart1NumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvMpstatPart1 2} nvMpstatPart1Table OBJECT-TYPE SYNTAX SEQUENCE OF NvMpstatPart1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpstatPart1 file." ::= { nvMpstatPart1 3 } nvMpstatPart1Entry OBJECT-TYPE SYNTAX NvMpstatPart1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpstatPart1 record." INDEX { nvMpstatPart1Index } ::= { nvMpstatPart1Table 1 } NvMpstatPart1Entry ::= SEQUENCE { nvMpstatPart1Index INTEGER, nvMpstatPart1UserName DisplayString, nvMpstatPart1IpcpOperS INTEGER, nvMpstatPart1Ipcp INTEGER, nvMpstatPart1IpAddress DisplayString, nvMpstatPart1Profile DisplayString, nvMpstatPart1RmtClass INTEGER, nvMpstatPart1RmtDisc DisplayString, nvMpstatPart1LocClass INTEGER, nvMpstatPart1LocDisc DisplayString, nvMpstatPart1RmtMRRU INTEGER, nvMpstatPart1LocMRRU INTEGER, nvMpstatPart1RmtSeqS INTEGER, nvMpstatPart1LocSeqS INTEGER, nvMpstatPart1Link1 DisplayString, nvMpstatPart1Link2 DisplayString, nvMpstatPart1Link3 DisplayString, nvMpstatPart1Link4 DisplayString, nvMpstatPart1Link5 DisplayString, nvMpstatPart1Link6 DisplayString, nvMpstatPart1Link7 DisplayString, nvMpstatPart1Link8 DisplayString, nvMpstatPart1Link9 DisplayString, nvMpstatPart1Link10 DisplayString, nvMpstatPart1Link11 DisplayString, nvMpstatPart1Link12 DisplayString, nvMpstatPart1Link13 DisplayString, nvMpstatPart1Link14 DisplayString, nvMpstatPart1Link15 DisplayString, nvMpstatPart1Link16 DisplayString } nvMpstatPart1Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of MpstatPart1 record" ::= { nvMpstatPart1Entry 1 } nvMpstatPart1UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Authenticated name of remote peer." ::= { nvMpstatPart1Entry 2 } nvMpstatPart1IpcpOperS OBJECT-TYPE SYNTAX INTEGER { down(1), -- protocol status is down (+1) up(2) -- protocol status is up } ACCESS read-only STATUS mandatory DESCRIPTION "Ipcp operation status (ipcpOperS)- IPCP protocol up or not." ::= { nvMpstatPart1Entry 3 } nvMpstatPart1Ipcp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ipcpconf file record number in use for this multilink bundle (ipcp)." ::= { nvMpstatPart1Entry 4 } nvMpstatPart1IpAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "IP address in use on this multilink bundle (ipaddr)." ::= { nvMpstatPart1Entry 5 } nvMpstatPart1Profile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "nvMpconfProfile value of nvMpconfTable entry (mpconf record) used to create this multilink bundle (profile)." ::= { nvMpstatPart1Entry 6 } nvMpstatPart1RmtClass OBJECT-TYPE SYNTAX INTEGER { null(1), -- NULL class local(2), -- Locally assigned address ipaddr(3), -- IP address from ipconf global(4), -- ieee 802.1 globally assigned magicnum(5), -- magic number block dirnum(6) -- public switched network directory number } ACCESS read-only STATUS mandatory DESCRIPTION "Class of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtClass)." ::= { nvMpstatPart1Entry 7 } nvMpstatPart1RmtDisc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..44)) ACCESS read-only STATUS mandatory DESCRIPTION "Value of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtDisc)." ::= { nvMpstatPart1Entry 8 } nvMpstatPart1LocClass OBJECT-TYPE SYNTAX INTEGER { null(1), -- NULL class local(2), -- Locally assigned address ipaddr(3), -- IP address from ipconf global(4), -- ieee 802.1 globally assigned magicnum(5), -- magic number block dirnum(6) -- public switched network directory number } ACCESS read-only STATUS mandatory DESCRIPTION "Class of endpoint discriminator in use on local (Nevada) end of multilink bundle (locClass)." ::= { nvMpstatPart1Entry 9 } nvMpstatPart1LocDisc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..44)) ACCESS read-only STATUS mandatory DESCRIPTION "Value of endpoint discriminator in use on local (Nevada) end of multilink bundle (rmtDisc)." ::= { nvMpstatPart1Entry 10 } nvMpstatPart1RmtMRRU OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value for the Maximum Reassembled Receive Unit negotiated for remote (peer) end of multilink bundle (rmtMRRU)." ::= { nvMpstatPart1Entry 11 } nvMpstatPart1LocMRRU OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value for the Maximum Reassembled Receive Unit negotiated for local (Nevada) end of multilink bundle (locMRRU)." ::= { nvMpstatPart1Entry 12 } nvMpstatPart1RmtSeqS OBJECT-TYPE SYNTAX INTEGER { short(1), -- short sequence numbers in use long(2) -- long sequence numbers in use } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether short or long sequence numbers are in use for multilink datagrams transmitted to the peer by the Nevada (rmtSeq)." ::= { nvMpstatPart1Entry 13 } nvMpstatPart1LocSeqS OBJECT-TYPE SYNTAX INTEGER { short(1), -- short sequence numbers in use long(2) -- long sequence numbers in use } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether short or long sequence numbers are in use for multilink datagrams received by the Nevada (locSeq)." ::= { nvMpstatPart1Entry 14 } nvMpstatPart1Link1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 15 } nvMpstatPart1Link2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 16 } nvMpstatPart1Link3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 17 } nvMpstatPart1Link4 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 18 } nvMpstatPart1Link5 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 19 } nvMpstatPart1Link6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 20 } nvMpstatPart1Link7 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 21 } nvMpstatPart1Link8 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 22 } nvMpstatPart1Link9 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 23 } nvMpstatPart1Link10 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 24 } nvMpstatPart1Link11 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 25 } nvMpstatPart1Link12 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 26 } nvMpstatPart1Link13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 27 } nvMpstatPart1Link14 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 28 } nvMpstatPart1Link15 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 29 } nvMpstatPart1Link16 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The LCP record number corresponding to nth link in the multilink bundle (link n)." ::= { nvMpstatPart1Entry 30 } nvMpstatPart2 OBJECT IDENTIFIER ::= { nevadaPpp 5 } nvMpstatPart2MaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvMpstatPart2 1} nvMpstatPart2NumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvMpstatPart2 2} nvMpstatPart2Table OBJECT-TYPE SYNTAX SEQUENCE OF NvMpstatPart2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpstatPart2 file." ::= { nvMpstatPart2 3 } nvMpstatPart2Entry OBJECT-TYPE SYNTAX NvMpstatPart2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "mpstatPart2 record." INDEX { nvMpstatPart2Index } ::= { nvMpstatPart2Table 1 } NvMpstatPart2Entry ::= SEQUENCE { nvMpstatPart2Index INTEGER, nvMpstatPart2InOctets Counter, nvMpstatPart2InPkts Counter, nvMpstatPart2InBfrags Counter, nvMpstatPart2InEfrags Counter, nvMpstatPart2InMfrags Counter, nvMpstatPart2InRsmErr Counter, nvMpstatPart2InDiscrd Counter, nvMpstatPart2InErrors Counter, nvMpstatPart2InEch Counter, nvMpstatPart2InEchRp Counter, nvMpstatPart2InDiscRq Counter, nvMpstatPart2UnKnwnPr Counter, nvMpstatPart2OutOctets Counter, nvMpstatPart2OutPkts Counter, nvMpstatPart2OutBfrags Counter, nvMpstatPart2OutEfrags Counter, nvMpstatPart2OutMfrags Counter, nvMpstatPart2OutDiscrd Counter, nvMpstatPart2OutErrors Counter, nvMpstatPart2OutEch Counter, nvMpstatPart2OutEchRp Counter, nvMpstatPart2OutDiscRq Counter, nvMpstatPart2OutCmPcnt --AF Counter, --AF nvMpstatPart2InCmPcnt --AF Counter, --AF nvMpstatPart2OutExpnds --AF Counter, --AF nvMpstatPart2Dtreset DisplayString } nvMpstatPart2Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of MpstatPart2 record" ::= { nvMpstatPart2Entry 1 } nvMpstatPart2InOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 2 } nvMpstatPart2InPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 3 } nvMpstatPart2InBfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good received multilink frames with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 4 } nvMpstatPart2InEfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good received multilink frames with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 5 } nvMpstatPart2InMfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good received multilink frames with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 6 } nvMpstatPart2InRsmErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of times the multilink receive algorithm detected one or more lost PPP datagrams (InRsmErr). Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 7 } nvMpstatPart2InDiscrd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discarded good packets (InDiscrd) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 8 } nvMpstatPart2InErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bad packets received (InError) The total number of frames received with errors due to crc,format etc. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 9 } nvMpstatPart2InEch OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 10 } nvMpstatPart2InEchRp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 11 } nvMpstatPart2InDiscRq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 12 } nvMpstatPart2UnKnwnPr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 13 } nvMpstatPart2OutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 14 } nvMpstatPart2OutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 15 } nvMpstatPart2OutBfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multilink frames transmitted with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 16 } nvMpstatPart2OutEfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multilink frames transmitted with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 17 } nvMpstatPart2OutMfrags OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multilink frames transmitted with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 18 } nvMpstatPart2OutDiscrd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 19 } nvMpstatPart2OutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 20 } nvMpstatPart2OutEch OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 21 } nvMpstatPart2OutEchRp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 22 } nvMpstatPart2OutDiscRq OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time." ::= { nvMpstatPart2Entry 23 } nvMpstatPart2OutCmPcnt OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Percent compression on tx." --AF ::= { nvMpstatPart2Entry 24 } --AF nvMpstatPart2InCmPcnt OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Percent compression on rx." --AF ::= { nvMpstatPart2Entry 25 } --AF nvMpstatPart2OutExpnds OBJECT-TYPE --AF SYNTAX Counter --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of packets expanded by compression." --AF ::= { nvMpstatPart2Entry 26 } --AF nvMpstatPart2Dtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvMpstatPart2Entry 27 } -- -- elxstat file -- nvElxstat OBJECT IDENTIFIER ::= { nevadaElx 1 } nvElxstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvElxstat 1} nvElxstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvElxstat 2} nvElxstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvElxstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "elxstat file." ::= { nvElxstat 3 } nvElxstatEntry OBJECT-TYPE SYNTAX NvElxstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "elxstat record." INDEX { nvElxstatIndex } ::= { nvElxstatTable 1 } NvElxstatEntry ::= SEQUENCE { nvElxstatIndex INTEGER, nvElxstatPhysAddr DisplayString, nvElxstatAdminStat INTEGER, nvElxstatOperStat INTEGER, nvElxstatInOctets Counter, nvElxstatInUcasts Counter, nvElxstatInNUcasts Counter, nvElxstatInDiscards Counter, nvElxstatInErrors Counter, nvElxstatUnKnwnPrs Counter, nvElxstatOutOctets Counter, nvElxstatOutUcasts Counter, nvElxstatOutNUcasts Counter, nvElxstatOutDiscrds Counter, nvElxstatOutErrors Counter, nvElxstatDtreset DisplayString } nvElxstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of elxstat record" ::= { nvElxstatEntry 1 } nvElxstatPhysAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "Ethernet Physical Address (PhysAddr) This field contains the Ethernet address as configured at the factory. " ::= { nvElxstatEntry 2 } nvElxstatAdminStat OBJECT-TYPE SYNTAX INTEGER { up(2), -- up (+1) down(3) -- down } ACCESS read-only STATUS mandatory DESCRIPTION "Desired Interface state (AdminStat) The desired state of the interface. This field reflects the desired state of the interface as determined by the enable field of the ELXCONF file,as well as the ELX.UP and ELX.DOWN commands. " ::= { nvElxstatEntry 3 } nvElxstatOperStat OBJECT-TYPE SYNTAX INTEGER { up(2), -- up (+1) down(3) -- down } ACCESS read-only STATUS mandatory DESCRIPTION "Current Interface state (OperStat) The current operational state of the Ethernet interface. This is determined by the AdminStat and whether or not any transmit faults were detected. " ::= { nvElxstatEntry 4 } nvElxstatInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets received on the interface (InOctets) The total number of octets received on the interface, including framing characters. Statistic is zeroed at startup time." ::= { nvElxstatEntry 5 } nvElxstatInUcasts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unicast packets delivered (InUcast) The number of subnetwork unicast packets delivered to a higher layer protocol. Statistic is zeroed at startup time." ::= { nvElxstatEntry 6 } nvElxstatInNUcasts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Non unicast packets delivered (InNUcast) The number of non unicast,i.e.,subnetwork broadcast or subnetwork multicast,packets delivered to a higher layer protocol. Statistic is zeroed at startup time." ::= { nvElxstatEntry 7 } nvElxstatInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Discarded input packets (InDiscard) The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time." ::= { nvElxstatEntry 8 } nvElxstatInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Error input packets (InError) The number of inbound packets that contained errors preventing them from being deliverable to a higher layer protocol. Statistic is zeroed at startup time." ::= { nvElxstatEntry 9 } nvElxstatUnKnwnPrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unknown protocol packets discarded (UnKnwnPr) The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time." ::= { nvElxstatEntry 10 } nvElxstatOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Octets transmitted from the interface (OutOctets) The total number of octets transmitted out the interface,including framing characters. Statistic is zeroed at startup time." ::= { nvElxstatEntry 11 } nvElxstatOutUcasts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unicast packets transmitted (OutUcast) The total number of packets that higher level protocols requested be transmitted to a subnetwork unicast address, including those that were discarded or not sent. Statistic is zeroed at startup time." ::= { nvElxstatEntry 12 } nvElxstatOutNUcasts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Non unicast packets transmitted (OutNUcast) The total number of packets that highel level protocols requested be transmitted to a non unicast,i.e.,a subnetwork broadcast or subnetwork multicast,address, including those that were discarded or not sent. Statistic is zeroed at startup time." ::= { nvElxstatEntry 13 } nvElxstatOutDiscrds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Discarded output packets (OutDiscrd) The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time." ::= { nvElxstatEntry 14 } nvElxstatOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Error output packets (OutErrors) The number of outbound packets that could not be transmitted because of errors. Statistic is zeroed at startup time." ::= { nvElxstatEntry 15 } nvElxstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvElxstatEntry 16 } -- -- elxconf file -- nvElxconf OBJECT IDENTIFIER ::= { nevadaElx 2 } nvElxconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvElxconf 1} nvElxconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvElxconf 2} nvElxconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvElxconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "elxconf file." ::= { nvElxconf 3 } nvElxconfEntry OBJECT-TYPE SYNTAX NvElxconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "elxconf record." INDEX { nvElxconfIndex } ::= { nvElxconfTable 1 } NvElxconfEntry ::= SEQUENCE { nvElxconfIndex INTEGER, nvElxconfEnable INTEGER, nvElxconfInactivty INTEGER } nvElxconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of elxconf record" ::= { nvElxconfEntry 1 } nvElxconfEnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Ethernet interface enabled (enable) This field indicates whether or not the Ethernet interface should be enabled. Note that disabling the interface does not disable IP. IP may still route between its other networks,such as X.25 and Frame Relay. Default value is yes (1+1)." ::= { nvElxconfEntry 2 } nvElxconfInactivty OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity test frame timer (inactivty) When this time in minutes has been exceeded with no activity on the Ethernet,a frame will be transmitted in order to check for transmit faults. Default value is 0." ::= { nvElxconfEntry 3 } -- -- ipconf -- nvIpconf OBJECT IDENTIFIER ::= { nevadaIp 1} nvIpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIpconf 1} nvIpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIpconf 2} nvIpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipconf file." ::= { nvIpconf 3 } nvIpconfEntry OBJECT-TYPE SYNTAX NvIpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipconf record." INDEX { nvIpconfIndex } ::= { nvIpconfTable 1 } NvIpconfEntry ::= SEQUENCE { nvIpconfIndex INTEGER, nvIpconfIpaddr DisplayString, nvIpconfMask DisplayString, nvIpconfBcastaddr DisplayString, nvIpconfMtu INTEGER, nvIpconfEncap INTEGER, nvIpconfRoutprot INTEGER, nvIpconfStatus INTEGER } nvIpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of ipconf record" ::= { nvIpconfEntry 1 } nvIpconfIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpconfEntry 7 } nvIpconfMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP network mask (mask) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpconfEntry 8 } nvIpconfBcastaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Outgoing broadcast IP address (bcastaddr) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpconfEntry 9 } nvIpconfMtu OBJECT-TYPE SYNTAX INTEGER (64..1500) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum frame length on this interface (mtu) Default value is 1500." ::= { nvIpconfEntry 10 } nvIpconfEncap OBJECT-TYPE SYNTAX INTEGER { v2(1), -- Ethernet Version 2 encapsulation (+1) snap(2) -- SNAP encapsulation } ACCESS read-write STATUS mandatory DESCRIPTION "Encapsulation type Default value is v2 (0+1)." ::= { nvIpconfEntry 11 } nvIpconfRoutprot OBJECT-TYPE SYNTAX INTEGER { none(1), -- none rip(9) -- rip,must agree with ip-rtsprot definition (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "IP routing protocol (routprot)." ::= { nvIpconfEntry 12 } nvIpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIpconfEntry 17 } -- -- ipstat file -- nvIpstat OBJECT IDENTIFIER ::= { nevadaIp 2} nvIpstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIpstat 1} nvIpstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIpstat 2} nvIpstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipstat file." ::= { nvIpstat 3 } nvIpstatEntry OBJECT-TYPE SYNTAX NvIpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipstat record." INDEX { nvIpstatIndex } ::= { nvIpstatTable 1 } NvIpstatEntry ::= SEQUENCE { nvIpstatIndex INTEGER, nvIpstatInRxs Counter, nvIpstatInHdrErrs Counter, nvIpstatInAdrErrs Counter, nvIpstatForwDatas Counter, nvIpstatUnKnwnPrs Counter, nvIpstatInDiscrds Counter, nvIpstatInDlvrs Counter, nvIpstatOutRqsts Counter, nvIpstatOutDiscrds Counter, nvIpstatOutNoRts Counter, nvIpstatReasmRqds Counter, nvIpstatReasmOKs Counter, nvIpstatReasmFails Counter, nvIpstatFragOKs Counter, nvIpstatFragFails Counter, nvIpstatFragCrs Counter, nvIpstatDtreset DisplayString } nvIpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of ipstat record" ::= { nvIpstatEntry 1 } nvIpstatInRxs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams received (InRx) The total number of input datagrams received from interfaces,including those received in error. Statistic is zeroed at startup time." ::= { nvIpstatEntry 2 } nvIpstatInHdrErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams with header errors (InHdrErr) The number of input datagrams discarded due to errors in their IP headers,including bad checksums,version number mismatch,other format errors,time-to-live exceeded,errors discovered in processing their IP options,etc. Statistic is zeroed at startup time." ::= { nvIpstatEntry 3 } nvIpstatInAdrErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams with address errors (InAdrErr) The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g.,0.0.0.0) and addresses of unsupported Classes (e.g.,Class E). For entities which are not IP Gateways and therefore do not forward datagrams,this counter includes datagrams discarded because the destination address was not a local address. Statistic is zeroed at startup time." ::= { nvIpstatEntry 4 } nvIpstatForwDatas OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams forwarded (ForwData) The number of input datagrams for which this entity was not their final IP destination,as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways,this counter will include only those packets which were Source-Routed via this entity,and the Source- Route option processing was successful. Statistic is zeroed at startup time." ::= { nvIpstatEntry 5 } nvIpstatUnKnwnPrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams with protocol errors (UnKnwnPr) The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time." ::= { nvIpstatEntry 6 } nvIpstatInDiscrds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams with buffer errors (InDiscrd) The number of input IP datagrams for which no problems were encountered to prevent their continued processing,but which were discarded (e.g.,for lack of buffer space). Note that this counter does not include any datagrams discarded while waiting re-assembly. Statistic is zeroed at startup time." ::= { nvIpstatEntry 7 } nvIpstatInDlvrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input datagrams delivered (InDlvrs) The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). Statistic is zeroed at startup time." ::= { nvIpstatEntry 8 } nvIpstatOutRqsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Local datagrams created (OutRqst) The total number of IP datagrams which local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ForwData. Statistic is zeroed at startup time." ::= { nvIpstatEntry 9 } nvIpstatOutDiscrds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Output datagrams with buffer errors (OutDiscrd) The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination,but which were discarded (e.g.,for lack of buffer space). Note that this counter would include datagrams counted in ForwData if any such packets met this (discretionary) discard criterion. Statistic is zeroed at startup time." ::= { nvIpstatEntry 10 } nvIpstatOutNoRts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Output datagrams with address errors (OutNoRts) The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ForwData which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default gateways are down. Statistic is zeroed at startup time." ::= { nvIpstatEntry 11 } nvIpstatReasmRqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received IP fragments (ReasmRqd) The number of IP fragments received which needed to be reassembled at this entity. Statistic is zeroed at startup time." ::= { nvIpstatEntry 12 } nvIpstatReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Datagrams successfully reassembled (ReasmOK) The number of IP datagrams successfully reassembled. Statistic is zeroed at startup time." ::= { nvIpstatEntry 13 } nvIpstatReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Datagram reassembly failures (ReasmFail) The number of errors detected by the IP re-assembly algorithm (for whatever reason: timed out,errors,etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can loose track of the number of fragments by combining them as they are received. Statistic is zeroed at startup time." ::= { nvIpstatEntry 14 } nvIpstatFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Datagrams successfully fragmented (FragOK) The number of IP datagrams that have been successfully fragmented at this entity. Statistic is zeroed at startup time." ::= { nvIpstatEntry 15 } nvIpstatFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Datagrams with fragmentation errors (FragFail) The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be,e.g.,because their Don't Fragment flag was set. Statistic is zeroed at startup time." ::= { nvIpstatEntry 16 } nvIpstatFragCrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Fragments created (FragCr) The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. Statistic is zeroed at startup time." ::= { nvIpstatEntry 17 } nvIpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvIpstatEntry 18 } -- -- ipwanmap -- nvIpwanmap OBJECT IDENTIFIER ::= { nevadaIp 3} nvIpwanmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIpwanmap 1} nvIpwanmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIpwanmap 2} nvIpwanmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIpwanmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipwanmap file." ::= { nvIpwanmap 3 } nvIpwanmapEntry OBJECT-TYPE SYNTAX NvIpwanmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipwanmap record." INDEX { nvIpwanmapIndex } ::= { nvIpwanmapTable 1 } NvIpwanmapEntry ::= SEQUENCE { nvIpwanmapIndex INTEGER, nvIpwanmapIpaddr DisplayString, nvIpwanmapMask DisplayString, nvIpwanmapBcastcntl INTEGER, nvIpwanmapMtu INTEGER, nvIpwanmapMetric INTEGER, nvIpwanmapInactivty INTEGER, nvIpwanmapNetaddr DisplayString, nvIpwanmapUserdat DisplayString, nvIpwanmapRevacc INTEGER, nvIpwanmapRevcall INTEGER, nvIpwanmapTput INTEGER, nvIpwanmapPsize INTEGER, nvIpwanmapWsize INTEGER, nvIpwanmapCugtype INTEGER, nvIpwanmapCug INTEGER, nvIpwanmapRpoa INTEGER, nvIpwanmapPvcid INTEGER, nvIpwanmapFrpvc INTEGER, nvIpwanmapNetprot INTEGER, nvIpwanmapIpcp INTEGER, nvIpwanmapIdnum INTEGER, nvIpwanmapStatus INTEGER } nvIpwanmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of ipwanmap record" ::= { nvIpwanmapEntry 1 } nvIpwanmapIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpwanmapEntry 7 } nvIpwanmapMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP network mask (mask) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpwanmapEntry 8 } nvIpwanmapBcastcntl OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Send internally generated broadcasts (broadcast) This field is a 15 byte character string in IP dotted address format. " ::= { nvIpwanmapEntry 9 } nvIpwanmapMtu OBJECT-TYPE SYNTAX INTEGER (64..1600) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum frame length on this interface (mtu) Default value is 1500." ::= { nvIpwanmapEntry 10 } nvIpwanmapMetric OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Cost of route (metric) Default value is 1." ::= { nvIpwanmapEntry 11 } nvIpwanmapInactivty OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timer (inactivty)." ::= { nvIpwanmapEntry 12 } nvIpwanmapNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Called address (netaddr)." ::= { nvIpwanmapEntry 13 } nvIpwanmapUserdat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User data (userdat) " ::= { nvIpwanmapEntry 14 } nvIpwanmapRevacc OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reverse charging accepted? (revacc) Default value is no (0+1)." ::= { nvIpwanmapEntry 15 } nvIpwanmapRevcall OBJECT-TYPE SYNTAX INTEGER { no(1), -- no yes(2) -- yes (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Reverse charging flag (revacc) Default value is no (0+1)." ::= { nvIpwanmapEntry 16 } nvIpwanmapTput OBJECT-TYPE SYNTAX INTEGER { link(1), -- link default (+1) bps75(4), -- 75 bps bps150(5), -- 150 bps bps300(6), -- 300 bps bps600(7), -- 600 bps bps1200(8), -- 1200 bps bps2400(9), -- 2400 bps bps4800(10), -- 4800 bps bps9600(11), -- 9600 bps bps19200(12), -- 19200 bps bps48000(13) -- 48000 bps } ACCESS read-write STATUS mandatory DESCRIPTION "Throughput (tput) Default value is link (0+1)." ::= { nvIpwanmapEntry 17 } nvIpwanmapPsize OBJECT-TYPE SYNTAX INTEGER { b16(5), -- 16 bytes (+1) b32(6), -- 32 bytes b64(7), -- 64 bytes b128(8), -- 128 bytes b256(9), -- 256 bytes b512(10), -- 512 bytes b1024(11), -- 1024 bytes b2048(12), -- 2048 bytes b4096(13) -- 4096 bytes } ACCESS read-write STATUS mandatory DESCRIPTION "Max packet size (psize) Default value is 8+1." ::= { nvIpwanmapEntry 18 } nvIpwanmapWsize OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "Max window size (wsize) Default value is 0." ::= { nvIpwanmapEntry 19 } nvIpwanmapCugtype OBJECT-TYPE SYNTAX INTEGER { nocug(1), -- No closed user group (+1) cug(2), -- Closed user group cugog(3), -- Closed user group with outgoing access bcug(4), -- Bilateral closed user group bcugog(5) -- Bilateral closed user group with outgoing access } ACCESS read-write STATUS mandatory DESCRIPTION "Closed user group type (cugtype) Default value is nocug (0+1)." ::= { nvIpwanmapEntry 20 } nvIpwanmapCug OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Closed user group number (cug) Default value is 0." ::= { nvIpwanmapEntry 21 } nvIpwanmapRpoa OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "RPOA number (rpoa) Default value is 0." ::= { nvIpwanmapEntry 22 } nvIpwanmapPvcid OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "PVC ID - zero if SVC (pvcid) Default value is 0." ::= { nvIpwanmapEntry 23 } nvIpwanmapFrpvc OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay PVC record (frpvc) Default value is 0." ::= { nvIpwanmapEntry 24 } nvIpwanmapNetprot OBJECT-TYPE SYNTAX INTEGER { x25(1), -- x25 network protocol (+1) slip(2), -- slip network protocol frelay(3), -- frame relay network protocol ppp(4) -- ppp network protocol } ACCESS read-write STATUS mandatory DESCRIPTION "Network protocol (netprot) Default value is x25 (0+1)." ::= { nvIpwanmapEntry 25 } nvIpwanmapIpcp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "IPCPCONF record number (ipcp) Default value is 0." ::= { nvIpwanmapEntry 26 } nvIpwanmapIdnum OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "PDS 974 stringid of calling addr Default value is 0." ::= { nvIpwanmapEntry 27 } nvIpwanmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIpwanmapEntry 36 } nvIproute OBJECT IDENTIFIER ::= { nevadaIp 4 } nvIprouteMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIproute 1} nvIprouteNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIproute 2} nvIprouteTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIprouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iproute file." ::= { nvIproute 3 } nvIprouteEntry OBJECT-TYPE SYNTAX NvIprouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iproute record." INDEX { nvIprouteIndex } ::= { nvIprouteTable 1 } NvIprouteEntry ::= SEQUENCE { nvIprouteIndex INTEGER, nvIprouteIpaddr DisplayString, nvIprouteMask DisplayString, nvIprouteNexthop DisplayString, nvIprouteMetric INTEGER, nvIprouteStatus INTEGER } nvIprouteIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iproute record" ::= { nvIprouteEntry 1 } nvIprouteIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format. " ::= { nvIprouteEntry 3 } nvIprouteMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP destination mask (ipmask) This field is a 15 byte character string in IP dotted address format. " ::= { nvIprouteEntry 4 } nvIprouteNexthop OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Next hop IP address (nexthop) This field is a 15 byte character string in IP dotted address format. " ::= { nvIprouteEntry 5 } nvIprouteMetric OBJECT-TYPE SYNTAX INTEGER (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Cost of route (metric) Default value is 1." ::= { nvIprouteEntry 6 } nvIprouteStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIprouteEntry 12 } nvIprtstat OBJECT IDENTIFIER ::= { nevadaIp 5} nvIprtstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIprtstat 1} nvIprtstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIprtstat 2} nvIprtstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIprtstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iprtstat file." ::= { nvIprtstat 3 } nvIprtstatEntry OBJECT-TYPE SYNTAX NvIprtstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iprtstat record." INDEX { nvIprtstatIndex } ::= { nvIprtstatTable 1 } NvIprtstatEntry ::= SEQUENCE { nvIprtstatIndex INTEGER, nvIprtstatDest DisplayString, nvIprtstatInterface INTEGER, nvIprtstatMetric INTEGER, nvIprtstatNextHop DisplayString, nvIprtstatType INTEGER, nvIprtstatProto INTEGER } nvIprtstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iprtstat record" ::= { nvIprtstatEntry 1 } nvIprtstatDest OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Destination address of this route (Dest) " ::= { nvIprtstatEntry 2 } nvIprtstatInterface OBJECT-TYPE SYNTAX INTEGER { x25(1), -- x.25 interface (+1) slip(2), -- slip network interface frelay(3), -- frame relay interface ppp(4), -- ppp network inteface ether(5) -- ethernet interface } ACCESS read-only STATUS mandatory DESCRIPTION "Interface for route (Interface) " ::= { nvIprtstatEntry 3 } nvIprtstatMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The routing metric for this route (Metric) " ::= { nvIprtstatEntry 4 } nvIprtstatNextHop OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The address of the next hop (NextHop) " ::= { nvIprtstatEntry 5 } nvIprtstatType OBJECT-TYPE SYNTAX INTEGER { other(2), -- none of the following (+1) invald(3), -- an invalidated route direct(4), -- route to directly connected network remote(5) -- route to non-local network } ACCESS read-only STATUS mandatory DESCRIPTION "The type of route (Type) " ::= { nvIprtstatEntry 6 } nvIprtstatProto OBJECT-TYPE SYNTAX INTEGER { local(3), -- manually configured entries (+1) icmp(5), -- icmp redirect rip(9), -- rip rad(17) -- rad } ACCESS read-only STATUS mandatory DESCRIPTION "The mechanism via which this route was learned (Proto) " ::= { nvIprtstatEntry 7 } -- -- icmpstat file -- nvIcmpstat OBJECT IDENTIFIER ::= { nevadaIp 6} nvIcmpstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIcmpstat 1} nvIcmpstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIcmpstat 2} nvIcmpstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIcmpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "icmpstat file." ::= { nvIcmpstat 3 } nvIcmpstatEntry OBJECT-TYPE SYNTAX NvIcmpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "icmpstat record." INDEX { nvIcmpstatIndex } ::= { nvIcmpstatTable 1 } NvIcmpstatEntry ::= SEQUENCE { nvIcmpstatIndex INTEGER, nvIcmpstatInMsgs Counter, nvIcmpstatInErrs Counter, nvIcmpstatInDstUnrs Counter, nvIcmpstatInTmExcds Counter, nvIcmpstatInPrmPrbs Counter, nvIcmpstatInSrcQus Counter, nvIcmpstatInRdrcts Counter, nvIcmpstatInEchs Counter, nvIcmpstatInEchRps Counter, nvIcmpstatInTmSts Counter, nvIcmpstatInTmStRps Counter, nvIcmpstatInAdMs Counter, nvIcmpstatInAdMsRps Counter, nvIcmpstatOutMsgs Counter, nvIcmpstatOutErrs Counter, nvIcmpstatOutDstUnrs Counter, nvIcmpstatOutTmExcds Counter, nvIcmpstatOutPrmPrbs Counter, nvIcmpstatOutSrcQus Counter, nvIcmpstatOutRdrcts Counter, nvIcmpstatOutEchs Counter, nvIcmpstatOutEchRps Counter, nvIcmpstatOutTmSts Counter, nvIcmpstatOutTmStRps Counter, nvIcmpstatOutAdMs Counter, nvIcmpstatOutAdMsRps Counter, nvIcmpstatDtreset DisplayString } nvIcmpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of icmpstat record" ::= { nvIcmpstatEntry 1 } nvIcmpstatInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input messages received (InMsgs) The total number of ICMP messages which the entity received. Note that this counter includes all those counted by InErrs. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 2 } nvIcmpstatInErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Input errors received (InErrs) The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums,bad length,etc.). Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 3 } nvIcmpstatInDstUnrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Destination Unreachable messages recieved (InDstUnr) The number of ICMP Destination Unreachable messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 4 } nvIcmpstatInTmExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Time Exceeded messages received (InTmExcd) The number of ICMP Time Exceeded messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 5 } nvIcmpstatInPrmPrbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Parameter Problem messages received (InPrmPrb) The number of ICMP Parameter Problem messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 6 } nvIcmpstatInSrcQus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Source Quench messages received (InSrcQu) The number of ICMP Source Quench messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 7 } nvIcmpstatInRdrcts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Redirect messages received (InRdrct) The number of ICMP Redirect messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 8 } nvIcmpstatInEchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Echo Request messages received (InEch) The number of ICMP Echo (request) messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 9 } nvIcmpstatInEchRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Echo Reply messages received (InEchRp) The number of ICMP Echo Reply messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 10 } nvIcmpstatInTmSts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp Request messages received (InTmSt) The number of ICMP Timestamp (request) messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 11 } nvIcmpstatInTmStRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp Reply messages received (InTmStRp) The number of ICMP Timestamp Reply messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 12 } nvIcmpstatInAdMs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Address Mask Request messages received (InAdMs) The number of ICMP Address Mask Request messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 13 } nvIcmpstatInAdMsRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Address Mask Reply messages received (InAdMsRp) The number of ICMP Address Mask Reply messages received. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 14 } nvIcmpstatOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Output messages attempted (OutMsgs) The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by OutErrs. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 15 } nvIcmpstatOutErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Output messages not sent (OutErrs) The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of errors which contribute to this counter's value. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 16 } nvIcmpstatOutDstUnrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Destination Unreachable messages sent (OutDstUnr) The number of ICMP Destination Unreachable messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 17 } nvIcmpstatOutTmExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Time Exceeded messages sent (OutTmExcd) The number of ICMP Time Exceeded messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 18 } nvIcmpstatOutPrmPrbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Parameter Problem messages sent (OutPrmPrb) The number of ICMP Parameter Problem messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 19 } nvIcmpstatOutSrcQus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Source Quench messages sent (OutSrcQu) The number of ICMP Source Quench messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 20 } nvIcmpstatOutRdrcts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Redirect messages sent (OutRdrct) The number of ICMP Redirect messages sent. For a host,this object will always be zero,since hosts do not send redirects. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 21 } nvIcmpstatOutEchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Echo Request messages sent (OutEch) The number of ICMP Echo (request) messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 22 } nvIcmpstatOutEchRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Echo Reply messages sent (OutEchRp) The number of ICMP Echo Reply messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 23 } nvIcmpstatOutTmSts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp Request meessages sent (OutTmSt) The number of ICMP Timestamp (request) messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 24 } nvIcmpstatOutTmStRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp Reply messages sent (OutTmStRp) The number of ICMP Timestamp Reply messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 25 } nvIcmpstatOutAdMs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Address Mask Request messages sent (OutAdMs) The number of ICMP Address Mask Request messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 26 } nvIcmpstatOutAdMsRps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Address Mask Reply messages sent (OutAdMsRp) The number of ICMP Address Mask Reply messages sent. Statistic is zeroed at startup time." ::= { nvIcmpstatEntry 27 } nvIcmpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvIcmpstatEntry 28 } -- -- iptrunk -- nvIptrunk OBJECT IDENTIFIER ::= { nevadaIp 7 } nvIptrunkMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIptrunk 1} nvIptrunkNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIptrunk 2} nvIptrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIptrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iptrunk file." ::= { nvIptrunk 3 } nvIptrunkEntry OBJECT-TYPE SYNTAX NvIptrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "iptrunk record." INDEX { nvIptrunkIndex } ::= { nvIptrunkTable 1 } NvIptrunkEntry ::= SEQUENCE { nvIptrunkIndex INTEGER, nvIptrunkIpaddr DisplayString, nvIptrunkDstiptrnk INTEGER, nvIptrunkStatus INTEGER } nvIptrunkIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of iptrunk record" ::= { nvIptrunkEntry 1 } nvIptrunkIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format. " ::= { nvIptrunkEntry 3 } nvIptrunkDstiptrnk OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "destenation lapb link (Dstiptrnk) Default value is 0." ::= { nvIptrunkEntry 5 } nvIptrunkStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIptrunkEntry 9 } -- -- ipcpconf -- nvIpcpconf OBJECT IDENTIFIER ::= { nevadaIp 8 } nvIpcpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvIpcpconf 1} nvIpcpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvIpcpconf 2} nvIpcpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvIpcpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipcpconf file." ::= { nvIpcpconf 3 } nvIpcpconfEntry OBJECT-TYPE SYNTAX NvIpcpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ipcpconf record." INDEX { nvIpcpconfIndex } ::= { nvIpcpconfTable 1 } NvIpcpconfEntry ::= SEQUENCE { nvIpcpconfIndex INTEGER, nvIpcpconfLcp INTEGER, nvIpcpconfCompress INTEGER, nvIpcpconfTest INTEGER, nvIpcpconfProfile DisplayString, nvIpcpconfDnsadd1 DisplayString, nvIpcpconfDnsadd2 DisplayString, nvIpcpconfNbnsadd1 DisplayString, nvIpcpconfNbnsadd2 DisplayString, nvIpcpconfStatus INTEGER } nvIpcpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Ipcpconf record." ::= { nvIpcpconfEntry 1 } nvIpcpconfLcp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "link control proto rec-num (lcp) " ::= { nvIpcpconfEntry 2 } nvIpcpconfCompress OBJECT-TYPE SYNTAX INTEGER { none(1) -- (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "compress flag." ::= { nvIpcpconfEntry 3 } nvIpcpconfTest OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1) yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "test mode." ::= { nvIpcpconfEntry 4 } nvIpcpconfProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Ipcp Profile Name" ::= { nvIpcpconfEntry 5 } nvIpcpconfDnsadd1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of primary DNS server" ::= { nvIpcpconfEntry 7} nvIpcpconfDnsadd2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of secondary DNS server" ::= { nvIpcpconfEntry 8} nvIpcpconfNbnsadd1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of primary NBNS server" ::= { nvIpcpconfEntry 9} nvIpcpconfNbnsadd2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address of secondary NBNS server" ::= { nvIpcpconfEntry 10} nvIpcpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvIpcpconfEntry 12 } -- -- -- tcpstat file -- nvTcpstat OBJECT IDENTIFIER ::= { nevadaTcp 1 } nvTcpstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvTcpstat 1} nvTcpstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvTcpstat 2} nvTcpstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTcpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat file." ::= {nvTcpstat 3} nvTcpstatEntry OBJECT-TYPE SYNTAX NvTcpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat record, indexed by record number" INDEX {nvTcpstatIndex} ::= {nvTcpstatTable 1 } NvTcpstatEntry ::= SEQUENCE { nvTcpstatIndex INTEGER, nvTcpstatConnattempts Counter, nvTcpstatAccepts Counter, nvTcpstatConnects Counter, nvTcpstatDrops Counter, nvTcpstatConndrops Counter, nvTcpstatCloseds Counter, nvTcpstatSegstimeds Counter, nvTcpstatRttupdateds Counter, nvTcpstatDelacks Counter, nvTcpstatTimeoutdrops Counter, nvTcpstatRexmttimeos Counter, nvTcpstatPersisttimeos Counter, nvTcpstatKeeptimeos Counter, nvTcpstatKeepprobes Counter, nvTcpstatKeepdrops Counter, nvTcpstatSndtotals Counter, nvTcpstatSndpacks Counter, nvTcpstatSndbytes Counter, nvTcpstatSndrexmitpacks Counter, nvTcpstatSndrexmitbytes Counter, nvTcpstatSndacks Counter, nvTcpstatSndprobes Counter, nvTcpstatSndurgs Counter, nvTcpstatSndwinups Counter, nvTcpstatSndctrls Counter, nvTcpstatRcvtotals Counter, nvTcpstatRcvpacks Counter, nvTcpstatRcvbytes Counter, nvTcpstatRcvbadsums Counter, nvTcpstatRcvbadoffs Counter, nvTcpstatRcvshorts Counter, nvTcpstatRcvduppacks Counter, nvTcpstatRcvdupbytes Counter, nvTcpstatRcvpartduppacks Counter, nvTcpstatRcvpartdupbytes Counter, nvTcpstatRcvoopacks Counter, nvTcpstatRcvoobytes Counter, nvTcpstatRcvpackafterwins Counter, nvTcpstatRcvbyteafterwins Counter, nvTcpstatRcvaftercloses Counter, nvTcpstatRcvwinprobes Counter, nvTcpstatRcvdupacks Counter, nvTcpstatRcvacktoomuchs Counter, nvTcpstatRcvackpacks Counter, nvTcpstatRcvackbytes Counter, nvTcpstatRcvwinupds Counter, nvTcpstatDtreset DisplayString } nvTcpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of tcpstat record" ::= {nvTcpstatEntry 1} nvTcpstatConnattempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "connection attempts made." ::= {nvTcpstatEntry 2} nvTcpstatAccepts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "connections accepted." ::= {nvTcpstatEntry 3} nvTcpstatConnects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "connections established." ::= {nvTcpstatEntry 4} nvTcpstatDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "connections dropped." ::= {nvTcpstatEntry 5} nvTcpstatConndrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "embryonic conns dropped." ::= {nvTcpstatEntry 6} nvTcpstatCloseds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "conn closed inlc drops." ::= {nvTcpstatEntry 7} nvTcpstatSegstimeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "segs where tried to get rt." ::= {nvTcpstatEntry 8} nvTcpstatRttupdateds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "times succeeded." ::= {nvTcpstatEntry 9} nvTcpstatDelacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "delayed acls sent." ::= {nvTcpstatEntry 10} nvTcpstatTimeoutdrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "conn dropped in rxmt timeout." ::= {nvTcpstatEntry 11} nvTcpstatRexmttimeos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "retransmit timeouts." ::= {nvTcpstatEntry 12} nvTcpstatPersisttimeos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "persist timeouts." ::= {nvTcpstatEntry 13} nvTcpstatKeeptimeos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "keepalive timeouts." ::= {nvTcpstatEntry 14} nvTcpstatKeepprobes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "keepalive probes sent." ::= {nvTcpstatEntry 15} nvTcpstatKeepdrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "connections dropped in keep alive." ::= {nvTcpstatEntry 16} nvTcpstatSndtotals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total packets sent." ::= {nvTcpstatEntry 17} nvTcpstatSndpacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "data packets sent." ::= {nvTcpstatEntry 18} nvTcpstatSndbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "data bytes sent." ::= {nvTcpstatEntry 19} nvTcpstatSndrexmitpacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "data packetes retransmitted." ::= {nvTcpstatEntry 20} nvTcpstatSndrexmitbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "data bytes retransmitted." ::= {nvTcpstatEntry 21} nvTcpstatSndacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "ack only packets sent." ::= {nvTcpstatEntry 22} nvTcpstatSndprobes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "window probes sent." ::= {nvTcpstatEntry 23} nvTcpstatSndurgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets sent with urg only." ::= {nvTcpstatEntry 24} nvTcpstatSndwinups OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "window update only packets." ::= {nvTcpstatEntry 25} nvTcpstatSndctrls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "control SYN|FIN|RST packets." ::= {nvTcpstatEntry 26} nvTcpstatRcvtotals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total packets rcvd." ::= {nvTcpstatEntry 27} nvTcpstatRcvpacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd in sequence." ::= {nvTcpstatEntry 28} nvTcpstatRcvbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "bytes rcvd in sequence." ::= {nvTcpstatEntry 29} nvTcpstatRcvbadsums OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd with cksum errors." ::= {nvTcpstatEntry 30} nvTcpstatRcvbadoffs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd with bad offset." ::= {nvTcpstatEntry 31} nvTcpstatRcvshorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd too short." ::= {nvTcpstatEntry 32} nvTcpstatRcvduppacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "dup only packets rcvd." ::= {nvTcpstatEntry 33} nvTcpstatRcvdupbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "dup only bytes rcvd." ::= {nvTcpstatEntry 34} nvTcpstatRcvpartduppacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets with some dup data." ::= {nvTcpstatEntry 35} nvTcpstatRcvpartdupbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "dup bytes in part dup packets." ::= {nvTcpstatEntry 36} nvTcpstatRcvoopacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "out of order packets rcvd." ::= {nvTcpstatEntry 37} nvTcpstatRcvoobytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "out of order bytes rcvd." ::= {nvTcpstatEntry 38} nvTcpstatRcvpackafterwins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd after window." ::= {nvTcpstatEntry 39} nvTcpstatRcvbyteafterwins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "bytes rcvd after window." ::= {nvTcpstatEntry 40} nvTcpstatRcvaftercloses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets rcvd after close." ::= {nvTcpstatEntry 41} nvTcpstatRcvwinprobes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rcvd window probe packets." ::= {nvTcpstatEntry 42} nvTcpstatRcvdupacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rcvd duplicate acks." ::= {nvTcpstatEntry 43} nvTcpstatRcvacktoomuchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rcvd acks for unsent data." ::= {nvTcpstatEntry 44} nvTcpstatRcvackpacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rcvd ack packets." ::= {nvTcpstatEntry 45} nvTcpstatRcvackbytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "bytes acked by rcvd acks." ::= {nvTcpstatEntry 46} nvTcpstatRcvwinupds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "rcvd window update pkts." ::= {nvTcpstatEntry 47} nvTcpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvTcpstatEntry 48 } -- -- tcpcnstat file -- nvTcpcnstat OBJECT IDENTIFIER ::= { nevadaTcp 2 } nvTcpcnstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvTcpcnstat 1} nvTcpcnstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvTcpcnstat 2} nvTcpcnstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTcpcnstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpcnstat file." ::= {nvTcpcnstat 3} nvTcpcnstatEntry OBJECT-TYPE SYNTAX NvTcpcnstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpcnstat record, indexed by record number" INDEX {nvTcpcnstatIndex} ::= {nvTcpcnstatTable 1 } NvTcpcnstatEntry ::= SEQUENCE { nvTcpcnstatIndex INTEGER, nvTcpcnstatState INTEGER, nvTcpcnstatLocaladdr DisplayString, nvTcpcnstatLocalport INTEGER, nvTcpcnstatRemaddr DisplayString, nvTcpcnstatRemport INTEGER, nvTcpcnstatDtreset DisplayString } nvTcpcnstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of tcpcnstat record" ::= {nvTcpcnstatEntry 1} nvTcpcnstatState OBJECT-TYPE SYNTAX INTEGER { null(1), -- (+1) closed(2), listen(3), syncsent(4), syncrcv(5), established(6), wait1(7), wait2(8), closewait(9), lastack(10), closing(11), timewait(12) } ACCESS read-only STATUS mandatory DESCRIPTION "Connection state." ::= {nvTcpcnstatEntry 2} nvTcpcnstatLocaladdr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Local host address." ::= {nvTcpcnstatEntry 3} nvTcpcnstatLocalport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local port." ::= {nvTcpcnstatEntry 4} nvTcpcnstatRemaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote host address." ::= {nvTcpcnstatEntry 5} nvTcpcnstatRemport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote port." ::= {nvTcpcnstatEntry 6} nvTcpcnstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvTcpcnstatEntry 7 } -- -- tcprstat file -- nvTcprstat OBJECT IDENTIFIER ::= { nevadaTcp 3 } nvTcprstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvTcprstat 1} nvTcprstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvTcprstat 2} nvTcprstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTcprstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcprstat file." ::= {nvTcprstat 3} nvTcprstatEntry OBJECT-TYPE SYNTAX NvTcprstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcprstat record, indexed by record number" INDEX {nvTcprstatIndex} ::= {nvTcprstatTable 1 } NvTcprstatEntry ::= SEQUENCE { nvTcprstatIndex INTEGER, nvTcprstatInport INTEGER, nvTcprstatOutport INTEGER, nvTcprstatService DisplayString, nvTcprstatDtreset DisplayString } nvTcprstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of tcprstat record" ::= {nvTcprstatEntry 1} nvTcprstatInport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Port number to check for traffic from IP." ::= {nvTcprstatEntry 2} nvTcprstatOutport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Port number to route call to if inport match." ::= {nvTcprstatEntry 3} nvTcprstatService OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "component using the port number." ::= {nvTcprstatEntry 4} nvTcprstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvTcprstatEntry 5 } --- --- Tslotconf file --- nvTslotconf OBJECT IDENTIFIER ::= { nevadaTcp 6 } --AF nvTslotconfMaxRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "total number of records allowed in database file." ::= {nvTslotconf 1} --AF nvTslotconfNumRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "number of records in use." --AF ::= {nvTslotconf 2} --AF nvTslotconfTable OBJECT-TYPE --AF SYNTAX SEQUENCE OF NvTslotconfEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tslotconf file." --AF ::= {nvTslotconf 3} --AF nvTslotconfEntry OBJECT-TYPE --AF SYNTAX NvTslotconfEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tslotconf record, indexed by record number" INDEX {nvTslotconfIndex} --AF ::= {nvTslotconfTable 1 } --AF NvTslotconfEntry ::= --AF SEQUENCE { --AF nvTslotconfIndex INTEGER, nvTslotconfName --AF DisplayString, --AF nvTslotconfOrigans --AF INTEGER, --AF nvTslotconfTcpprof --AF DisplayString, --AF nvTslotconfReserve1 DisplayString, nvTslotconfReserve2 DisplayString, nvTslotconfMaxrxbuf INTEGER, nvTslotconfEnable INTEGER, nvTslotconfStatus INTEGER, nvTslotconfVersion INTEGER, nvTslotconfPeertsid INTEGER, nvTslotconfPeeripadr DisplayString } nvTslotconfIndex OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Index of tslotconf record" --AF ::= {nvTslotconfEntry 1} --AF nvTslotconfName OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..6)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Name of TSLOT instance." --AF ::= { nvTslotconfEntry 2 } --AF nvTslotconfOrigans OBJECT-TYPE --AF SYNTAX INTEGER{ --AF originate(2), --AF +1 answer(3) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Originate or answer." --AF ::= {nvTslotconfEntry 3} --AF nvTslotconfTcpprof OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..8)) --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "TCP profile name." --AF ::= { nvTslotconfEntry 4 } --AF nvTslotconfReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "OBSOLETE - removed field." ::= { nvTslotconfEntry 5 } nvTslotconfReserve2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "OBSOLETE - removed field." ::= { nvTslotconfEntry 6 } nvTslotconfMaxrxbuf OBJECT-TYPE SYNTAX INTEGER (1..9400) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum receive buffer space." ::= {nvTslotconfEntry 7} nvTslotconfEnable OBJECT-TYPE --AF SYNTAX INTEGER{ --AF yes(2), --AF +1 no(3) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Is this TSLOT enabled." --AF ::= {nvTslotconfEntry 8} --AF nvTslotconfStatus OBJECT-TYPE --AF SYNTAX INTEGER { --AF valid(1), --AF invalid(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvTslotconfEntry 9 } --AF nvTslotconfVersion OBJECT-TYPE SYNTAX INTEGER { ver0(2), ver1(3) } ACCESS read-write STATUS mandatory DESCRIPTION "TSLOT version number to behave as." ::= { nvTslotconfEntry 10 } nvTslotconfPeertsid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "TSLOT ID on destination side. Only used if origans = originate." ::= { nvTslotconfEntry 11 } nvTslotconfPeeripadr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address if destination machine. Only used if origans = originate." ::= { nvTslotconfEntry 12 } ---AF --- Tslotstat file ---AF nvTslotstat OBJECT IDENTIFIER ::= { nevadaTcp 7 } --AF nvTslotstatMaxRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "total number of records allowed in database file." ::= {nvTslotstat 1} --AF nvTslotstatNumRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "number of records in use." --AF ::= {nvTslotstat 2} --AF nvTslotstatTable OBJECT-TYPE --AF SYNTAX SEQUENCE OF NvTslotstatEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tslotstat file." --AF ::= {nvTslotstat 3} --AF nvTslotstatEntry OBJECT-TYPE --AF SYNTAX NvTslotstatEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tslotstat record, indexed by record number" INDEX {nvTslotstatIndex} --AF ::= {nvTslotstatTable 1 } --AF NvTslotstatEntry ::= --AF SEQUENCE { --AF nvTslotstatIndex --AF INTEGER, --AF nvTslotstatName --AF DisplayString, --AF nvTslotstatService --AF INTEGER, --AF nvTslotstatServiceid --AF DisplayString, --AF nvTslotstatOpstate --AF INTEGER, --AF nvTslotstatRemipaddr --AF DisplayString, --AF nvTslotstatRemtsid --AF INTEGER, --AF nvTslotstatTcpcn --AF INTEGER, --AF nvTslotstatNumcon --AF INTEGER, --AF nvTslotstatNumfailcn --AF INTEGER, --AF nvTslotstatTotrxfrm --AF INTEGER, --AF nvTslotstatTottxfrm --AF INTEGER, --AF nvTslotstatCurtxfrm --AF INTEGER, --AF nvTslotstatCurrxfrm --AF INTEGER, --AF nvTslotstatCurdrprx --AF INTEGER, --AF nvTslotstatDtreset DisplayString } nvTslotstatIndex OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Index of tslotconf record" --AF ::= {nvTslotstatEntry 1} --AF nvTslotstatName OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..6)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Name of TSLOT instance." --AF ::= { nvTslotstatEntry 2 } --AF nvTslotstatService OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Connected component id." --AF ::= {nvTslotstatEntry 3} --AF nvTslotstatServiceid OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..8)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Service instance name." --AF ::= { nvTslotstatEntry 4 } --AF nvTslotstatOpstate OBJECT-TYPE --AF SYNTAX INTEGER{ --AF disabled(1), --AF idle(2), --AF conreq(3), --AF conwait(4), --AF conn(5) --AF } --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "TSLOT instance operational state." --AF ::= {nvTslotstatEntry 5} --AF nvTslotstatRemipaddr OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..16)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Remote machine IP address. This field is a 15 byte character string in IP dotted address format. " ::= { nvTslotstatEntry 6 } nvTslotstatRemtsid OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "TSLOT ID on remote machine." --AF ::= {nvTslotstatEntry 7} --AF nvTslotstatTcpcn OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "TCPCNSTAT file record number." --AF ::= {nvTslotstatEntry 8} --AF nvTslotstatNumcon OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of TCP connections." --AF ::= {nvTslotstatEntry 9} --AF nvTslotstatNumfailcn OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of failed attempts at TCP connection." --AF ::= {nvTslotstatEntry 10} --AF nvTslotstatTotrxfrm OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Total number of received frames." --AF ::= {nvTslotstatEntry 11} --AF nvTslotstatTottxfrm OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Total number of transmitted frames." --AF ::= {nvTslotstatEntry 12} --AF nvTslotstatCurtxfrm OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Total number of transmitted frames on current TCP connection." --AF ::= {nvTslotstatEntry 13} --AF nvTslotstatCurrxfrm OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Total number of received frames on current TCP connection." --AF ::= {nvTslotstatEntry 14} --AF nvTslotstatCurdrprx OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Number of dropped frames due to ins buffer space." --AF ::= { nvTslotstatEntry 15 } --AF nvTslotstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvTslotstatEntry 16 } ---AF --- Tcpprof file ---AF nvTcpprof OBJECT IDENTIFIER ::= { nevadaTcp 8 } --AF nvTcpprofMaxRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "total number of records allowed in database file." ::= {nvTcpprof 1} --AF nvTcpprofNumRec OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "number of records in use." --AF ::= {nvTcpprof 2} --AF nvTcpprofTable OBJECT-TYPE --AF SYNTAX SEQUENCE OF NvTcpprofEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tcpprof file." --AF ::= {nvTcpprof 3} --AF nvTcpprofEntry OBJECT-TYPE --AF SYNTAX NvTcpprofEntry --AF ACCESS not-accessible --AF STATUS mandatory --AF DESCRIPTION --AF "tcpprof record, indexed by record number" INDEX {nvTcpprofIndex} --AF ::= {nvTcpprofTable 1 } --AF NvTcpprofEntry ::= --AF SEQUENCE { --AF nvTcpprofIndex --AF INTEGER, --AF nvTcpprofProfname --AF DisplayString, --AF nvTcpprofKeepidle --AF INTEGER, --AF nvTcpprofKeepprbs --AF DisplayString, --AF nvTcpprofKeepintvl --AF INTEGER, --AF nvTcpprofStatus --AF INTEGER --AF } nvTcpprofIndex OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "Index of tslotconf record" --AF ::= {nvTcpprofEntry 1} --AF nvTcpprofProfname OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..8)) --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Nmae of TCP profile." --AF ::= { nvTcpprofEntry 2 } --AF nvTcpprofKeepidle OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Idle time in seconds before keepalive probe." --AF ::= {nvTcpprofEntry 3} --AF nvTcpprofKeepprbs OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Number of unanswered probes before reset." --AF ::= { nvTcpprofEntry 4 } --AF nvTcpprofKeepintvl OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Interval in seconds between keppalive probes." --AF ::= {nvTcpprofEntry 5} --AF nvTcpprofStatus OBJECT-TYPE --AF SYNTAX INTEGER { --AF valid(1), --AF invalid(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvTcpprofEntry 6 } --AF -- -- nsock file -- nvNsockconf OBJECT IDENTIFIER ::= { nevadaTcp 4 } nvNsockconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNsockconf 1} nvNsockconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNsockconf 2} nvNsockconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNsockconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat file." ::= {nvNsockconf 3} nvNsockconfEntry OBJECT-TYPE SYNTAX NvNsockconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat record, indexed by record number" INDEX {nvNsockconfIndex} ::= {nvNsockconfTable 1 } NvNsockconfEntry ::= SEQUENCE { nvNsockconfIndex INTEGER, nvNsockconfMaxconn INTEGER, nvNsockconfStatus INTEGER, nvNsockconfDefport INTEGER } nvNsockconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nsockconf record" ::= {nvNsockconfEntry 1} nvNsockconfMaxconn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of connections." ::= {nvNsockconfEntry 2} nvNsockconfStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockconfEntry 3} nvNsockconfDefport OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "default TCP port." ::= {nvNsockconfEntry 4} nvNsockmap OBJECT IDENTIFIER ::= { nevadaTcp 5 } nvNsockmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvNsockmap 1} nvNsockmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvNsockmap 2} nvNsockmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvNsockmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat file." ::= {nvNsockmap 3} nvNsockmapEntry OBJECT-TYPE SYNTAX NvNsockmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "tcpstat record, indexed by record number" INDEX {nvNsockmapIndex} ::= {nvNsockmapTable 1 } NvNsockmapEntry ::= SEQUENCE { nvNsockmapIndex INTEGER, nvNsockmapOrigin INTEGER, nvNsockmapService INTEGER, nvNsockmapMaxsessn INTEGER, nvNsockmapNbusport INTEGER, nvNsockmapNetaddr DisplayString, nvNsockmapUserdata DisplayString, nvNsockmapTcpport INTEGER, nvNsockmapIpaddr DisplayString, nvNsockmapTcpmsglen INTEGER, nvNsockmapStatus INTEGER } nvNsockmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nsockconf record" ::= {nvNsockmapEntry 1} nvNsockmapOrigin OBJECT-TYPE SYNTAX INTEGER { tcp(1), nbus(2) } ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 2} nvNsockmapService OBJECT-TYPE SYNTAX INTEGER { any(1), telnet(2), pos(3), x25(4) } ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 3} nvNsockmapMaxsessn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 4} nvNsockmapNbusport OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 5} nvNsockmapNetaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 6} nvNsockmapUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 7} nvNsockmapTcpport OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 8} nvNsockmapIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 9} nvNsockmapTcpmsglen OBJECT-TYPE SYNTAX INTEGER { none (1), vap (2), bin2 (3), bin3 (4), bin4 (5) } ACCESS read-write STATUS mandatory DESCRIPTION " type of header for tcp message " ::= {nvNsockmapEntry 11} nvNsockmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "nsockconf record" ::= {nvNsockmapEntry 10} -- -- ftpconf file -- nvFtpconf OBJECT IDENTIFIER ::= { nevadaFtp 1 } nvFtpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvFtpconf 1} nvFtpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvFtpconf 2} nvFtpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvFtpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ftpconf file." ::= {nvFtpconf 3} nvFtpconfEntry OBJECT-TYPE SYNTAX NvFtpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ftpconf record, indexed by record number" INDEX {nvFtpconfIndex} ::= {nvFtpconfTable 1 } NvFtpconfEntry ::= SEQUENCE { nvFtpconfIndex INTEGER, nvFtpconfReqaddr DisplayString, nvFtpconfUsername DisplayString, nvFtpconfPassword DisplayString, nvFtpconfTimeout INTEGER, nvFtpconfStatus INTEGER } nvFtpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of ftpconf record" ::= {nvFtpconfEntry 1} nvFtpconfReqaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "FTPD remote client IP address." ::= {nvFtpconfEntry 2} nvFtpconfUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "FTPD username." ::= {nvFtpconfEntry 3} nvFtpconfPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "FTPD user password." ::= {nvFtpconfEntry 4} nvFtpconfTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "FTPD user inactivity timer." ::= {nvFtpconfEntry 5} nvFtpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid). Reqaddr MUST be set to a valid value before adding new record (setting Status to valid)." ::= { nvFtpconfEntry 10 } -- -- -- ftpstat file -- nvFtpstat OBJECT IDENTIFIER ::= { nevadaFtp 2 } nvFtpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of ftpconf record" ::= {nvFtpstat 1} nvFtpstatServaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "server FTP host IP address." ::= {nvFtpstat 2} nvFtpstatNumreqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of connection requested." ::= {nvFtpstat 3} nvFtpstatConnects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of successful connections." ::= {nvFtpstat 4} nvFtpstatConnfails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of connect request failures." ::= {nvFtpstat 5} nvFtpstatTotalfirvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of files server received." ::= {nvFtpstat 6} nvFtpstatTotalfisds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of files server sent." ::= {nvFtpstat 7} nvFtpstatTotalkbyrvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Kbytes server received." ::= {nvFtpstat 8} nvFtpstatTotalkbysds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "number of Kbytes server sent." ::= {nvFtpstat 9} nvFtpstatClientaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "client FTP host IP address." ::= {nvFtpstat 10} nvFtpstatCurrstat OBJECT-TYPE SYNTAX INTEGER { closed(1), -- (+1) copen(2), bothopen(3) } ACCESS read-only STATUS mandatory DESCRIPTION "current FTPD status." ::= {nvFtpstat 11} nvFtpstatCommstat OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) cmdok(2), cmdfail(3), cmderr(4) } ACCESS read-only STATUS mandatory DESCRIPTION "last command status." ::= {nvFtpstat 12} nvFtpstatTotalsucs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of commands executed successfully." ::= {nvFtpstat 13} nvFtpstatTotalfals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of commands executed with failure." ::= {nvFtpstat 14} nvFtpstatTotalerrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of unsupported commands." ::= {nvFtpstat 15} nvFtpstatCurrfirecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of files current user received." ::= {nvFtpstat 16} nvFtpstatCurrfisnds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of files current user sent." ::= {nvFtpstat 17} nvFtpstatCurrkbyrvs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of Kbytes current user server sent." ::= {nvFtpstat 18} nvFtpstatCurrkbysds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "total number of Kbytes current user server received." ::= {nvFtpstat 19} nvFtpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= {nvFtpstat 20 } -- -- Tnconf -- nvTnconf OBJECT IDENTIFIER ::= { nevadaTelnet 1 } nvTnconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTnconf 1} nvTnconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTnconf 2} nvTnconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet config file." ::= { nvTnconf 3 } nvTnconfEntry OBJECT-TYPE SYNTAX NvTnconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet record." INDEX { nvTnconfIndex } ::= { nvTnconfTable 1 } NvTnconfEntry ::= SEQUENCE { nvTnconfIndex INTEGER, nvTnconfNumSess INTEGER, nvTnconfDeftnclass DisplayString, nvTnconfDefiticlass DisplayString, nvTnconfDefminbspace INTEGER, nvTnconfDefmaxbspace INTEGER } nvTnconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telenet conf record" ::= { nvTnconfEntry 1 } nvTnconfNumSess OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "number of simultaneous sessions" ::= { nvTnconfEntry 2 } nvTnconfDeftnclass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Default telnet class" ::= { nvTnconfEntry 3 } nvTnconfDefiticlass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Default iti class" ::= { nvTnconfEntry 4 } nvTnconfDefminbspace OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "number of simultaneous sessions" ::= { nvTnconfEntry 5 } nvTnconfDefmaxbspace OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "number of simultaneous sessions" ::= { nvTnconfEntry 6 } -- -- tnclass -- nvTnclass OBJECT IDENTIFIER ::= { nevadaTelnet 2 } nvTnclassMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTnclass 1} nvTnclassNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTnclass 2} nvTnclassTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnclassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet class file." ::= { nvTnclass 3 } nvTnclassEntry OBJECT-TYPE SYNTAX NvTnclassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet record." INDEX { nvTnclassIndex } ::= { nvTnclassTable 1 } NvTnclassEntry ::= SEQUENCE { nvTnclassIndex INTEGER, nvTnclassClassname DisplayString, nvTnclassAobreak INTEGER, nvTnclassIpcmd INTEGER, nvTnclassGoahead INTEGER, nvTnclassStatus INTEGER } nvTnclassIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telenet class record" ::= { nvTnclassEntry 1 } nvTnclassClassname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet classname" ::= { nvTnclassEntry 2 } nvTnclassAobreak OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Telnet abort cmd issues break" ::= { nvTnclassEntry 4 } nvTnclassIpcmd OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Telnet interrupt process cmd" ::= { nvTnclassEntry 5 } nvTnclassGoahead OBJECT-TYPE SYNTAX INTEGER { send(1), suppress(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Telnet suppress/send Go Ahead cmd" ::= { nvTnclassEntry 7 } nvTnclassStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvTnclassEntry 9 } -- -- tnmap -- nvTnmap OBJECT IDENTIFIER ::= { nevadaTelnet 3 } nvTnmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTnmap 1} nvTnmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTnmap 2} nvTnmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet map file." ::= { nvTnmap 3 } nvTnmapEntry OBJECT-TYPE SYNTAX NvTnmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet map record." INDEX { nvTnmapIndex } ::= { nvTnmapTable 1 } NvTnmapEntry ::= SEQUENCE { nvTnmapIndex INTEGER, nvTnmapPortnum INTEGER, nvTnmapTnclass DisplayString, nvTnmapIticlass DisplayString, nvTnmapStatus INTEGER } nvTnmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telenet map record" ::= { nvTnmapEntry 1 } nvTnmapPortnum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet portnumber" ::= { nvTnmapEntry 2 } nvTnmapTnclass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet classname" ::= { nvTnmapEntry 3 } nvTnmapIticlass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet iti classname" ::= { nvTnmapEntry 4 } nvTnmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvTnmapEntry 5 } -- -- tnstat -- nvTnstat OBJECT IDENTIFIER ::= { nevadaTelnet 4 } nvTnstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTnstat 1} nvTnstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTnstat 2} nvTnstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTnstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet stat file." ::= { nvTnstat 3 } nvTnstatEntry OBJECT-TYPE SYNTAX NvTnstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet stat record." INDEX { nvTnstatIndex } ::= { nvTnstatTable 1 } NvTnstatEntry ::= SEQUENCE { nvTnstatIndex INTEGER, nvTnstatPortnum INTEGER, nvTnstatStatus INTEGER, nvTnstatMode INTEGER, nvTnstatLastCmd DisplayString, nvTnstatOptions DisplayString, nvTnstatClientAddr DisplayString } nvTnstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telenet stat record" ::= { nvTnstatEntry 1 } nvTnstatPortnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Telnet portnumber in use" ::= { nvTnstatEntry 2 } nvTnstatStatus OBJECT-TYPE SYNTAX INTEGER { disconnected(1), connecting(2), connected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Telnet call status" ::= { nvTnstatEntry 3 } nvTnstatMode OBJECT-TYPE SYNTAX INTEGER { normal(1), linemode(2), binary(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Telnet mode in use" ::= { nvTnstatEntry 4 } nvTnstatLastCmd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Telnet last cmd received" ::= { nvTnstatEntry 5 } nvTnstatOptions OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "Telnet active options" ::= { nvTnstatEntry 6 } nvTnstatClientAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Address of the Client." ::= { nvTnstatEntry 7 } -- -- tncconf -- nvTncconf OBJECT IDENTIFIER ::= { nevadaTelnet 5 } nvTncconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTncconf 1} nvTncconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTncconf 2} nvTncconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTncconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet cconf file." ::= { nvTncconf 3 } nvTncconfEntry OBJECT-TYPE SYNTAX NvTncconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node Tncconf record." INDEX { nvTncconfIndex } ::= { nvTncconfTable 1 } NvTncconfEntry ::= SEQUENCE { nvTncconfIndex INTEGER, nvTncconfNumSess INTEGER, nvTncconfX3parms INTEGER, nvTncconfSetact INTEGER, nvTncconfIdletim INTEGER, nvTncconfEscape INTEGER, nvTncconfEcho INTEGER, nvTncconfInterrupt INTEGER, nvTncconfQuit INTEGER, nvTncconfFout INTEGER, nvTncconfErase INTEGER, nvTncconfKill INTEGER, nvTncconfAyt INTEGER, nvTncconfSuspend INTEGER, nvTncconfDnsaddr DisplayString, nvTncconfStatus INTEGER } nvTncconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telnet Client record" ::= { nvTncconfEntry 1 } nvTncconfNumSess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of simultaneous sessions (numSess)" ::= { nvTncconfEntry 2 } nvTncconfX3parms OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "string of X.3 params to send at start (x3parms)" ::= { nvTncconfEntry 3 } nvTncconfSetact OBJECT-TYPE SYNTAX INTEGER { yes(2), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "allow user to perform set actions (setact)" ::= { nvTncconfEntry 4 } nvTncconfIdletim OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "forwarding timer used in character at a time (idletim)" ::= { nvTncconfEntry 5 } nvTncconfEscape OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for escape (escape)" ::= { nvTncconfEntry 6 } nvTncconfEcho OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for echo (echo)" ::= { nvTncconfEntry 7 } nvTncconfInterrupt OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for interrupt (interrupt)" ::= { nvTncconfEntry 8 } nvTncconfQuit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for quit (quit)" ::= { nvTncconfEntry 9 } nvTncconfFout OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for flushoutput (fout)" ::= { nvTncconfEntry 10 } nvTncconfErase OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for erase (erase)" ::= { nvTncconfEntry 11 } nvTncconfKill OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for kill (kill)" ::= { nvTncconfEntry 12 } nvTncconfAyt OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for ayt (ayt)" ::= { nvTncconfEntry 13 } nvTncconfSuspend OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "decimal number of character to use for suspend (suspend)" ::= { nvTncconfEntry 14 } nvTncconfDnsaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " Dnsaddr" ::= { nvTncconfEntry 15 } nvTncconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvTncconfEntry 16 } -- -- tncmap -- nvTncmap OBJECT IDENTIFIER ::= { nevadaTelnet 6 } nvTncmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTncmap 1} nvTncmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTncmap 2} nvTncmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTncmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet cstat file." ::= { nvTncmap 3 } nvTncmapEntry OBJECT-TYPE SYNTAX NvTncmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet cstat record." INDEX { nvTncmapIndex } ::= { nvTncmapTable 1 } NvTncmapEntry ::= SEQUENCE { nvTncmapIndex INTEGER, nvTncmapNetad DisplayString, nvTncmapUsdata DisplayString, nvTncmapIpaddr DisplayString, nvTncmapTcppn DisplayString, nvTncmapX3parms INTEGER, nvTncmapMode INTEGER, nvTncmapSecure INTEGER, nvTncmapStatus INTEGER } nvTncmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telnet Client map record" ::= { nvTncmapEntry 1 } nvTncmapNetad OBJECT-TYPE SYNTAX DisplayString(SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 2 } nvTncmapUsdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 3 } nvTncmapIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 4 } nvTncmapTcppn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 5 } nvTncmapX3parms OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 6 } nvTncmapMode OBJECT-TYPE SYNTAX INTEGER { asci(1), binary(2) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 7 } nvTncmapSecure OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " security opreation enabled" ::= { nvTncmapEntry 9 } nvTncmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvTncmapEntry 8 } -- -- tncstat -- nvTncstat OBJECT IDENTIFIER ::= { nevadaTelnet 7 } nvTncstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvTncstat 1} nvTncstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvTncstat 2} nvTncstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTncstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Telnet cstat file." ::= { nvTncstat 3 } nvTncstatEntry OBJECT-TYPE SYNTAX NvTncstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node Telnet cstat record." INDEX { nvTncstatIndex } ::= { nvTncstatTable 1 } NvTncstatEntry ::= SEQUENCE { nvTncstatIndex INTEGER, nvTncstatSessnum INTEGER, nvTncstatStatus INTEGER, nvTncstatDnsidx INTEGER, nvTncstatCalladdr DisplayString, nvTncstatCalldata DisplayString, nvTncstatIpaddr DisplayString, nvTncstatPortnum INTEGER, nvTncstatMode INTEGER, nvTncstatX29err INTEGER } nvTncstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Telnet Client stat record" ::= { nvTncstatEntry 1 } nvTncstatSessnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the number of the session" ::= { nvTncstatEntry 2} nvTncstatStatus OBJECT-TYPE SYNTAX INTEGER { discon(1), cnectg(2), cnetctd(3), cmd(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Call status " ::= { nvTncstatEntry 3} nvTncstatDnsidx OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "dnsindex " ::= { nvTncstatEntry 4} nvTncstatCalladdr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "x121 address calling TELNET Client" ::= { nvTncstatEntry 5} nvTncstatCalldata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "call user data" ::= { nvTncstatEntry 6} nvTncstatIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "ip address connected to" ::= { nvTncstatEntry 7} nvTncstatPortnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Port number connected to" ::= { nvTncstatEntry 8} nvTncstatMode OBJECT-TYPE SYNTAX INTEGER { normal(1), linemode(2), binary(3) } ACCESS read-only STATUS mandatory DESCRIPTION "mode in use" ::= { nvTncstatEntry 9} nvTncstatX29err OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "last X29 error rcvd from 3XPAD" ::= { nvTncstatEntry 10} -- -- radconf file -- nvRadconf OBJECT IDENTIFIER ::= { nevadaRadius 1 } nvRadconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRadconf 1} nvRadconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRadconf 2} nvRadconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRadconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radconf file." ::= {nvRadconf 3} nvRadconfEntry OBJECT-TYPE SYNTAX NvRadconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radconf record, indexed by record number" INDEX {nvRadconfIndex} ::= {nvRadconfTable 1 } NvRadconfEntry ::= SEQUENCE { nvRadconfIndex INTEGER, nvRadconfName DisplayString, nvRadconfSecret DisplayString, nvRadconfN1 INTEGER, nvRadconfT1 INTEGER, nvRadconfAcct INTEGER, nvRadconfNumdigits INTEGER, nvRadconfAuth1 DisplayString, nvRadconfAuth2 DisplayString, nvRadconfAuth3 DisplayString, nvRadconfAcct1 DisplayString, nvRadconfAcct2 DisplayString, nvRadconfAcct3 DisplayString, nvRadconfAcctauth INTEGER, nvRadconfAuth1port --AF INTEGER, --AF nvRadconfAuth2port --AF INTEGER, --AF nvRadconfAuth3port --AF INTEGER, --AF nvRadconfAcct1port --AF INTEGER, --AF nvRadconfAcct2port --AF INTEGER, --AF nvRadconfAcct3port --AF INTEGER, --AF nvRadconfAttrchk --AF INTEGER, --AF nvRadconfDnsatt1 INTEGER, nvRadconfDnsatt2 INTEGER, nvRadconfNbnsatt1 INTEGER, nvRadconfStatus INTEGER, nvRadconfNbnsatt2 INTEGER } nvRadconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of radconf record" ::= {nvRadconfEntry 1} nvRadconfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Nevada name." ::= {nvRadconfEntry 2} nvRadconfSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "secret for accounting." ::= {nvRadconfEntry 3} nvRadconfN1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "retry counter." ::= {nvRadconfEntry 4} nvRadconfT1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "times between attempts." ::= {nvRadconfEntry 5} nvRadconfAcct OBJECT-TYPE SYNTAX INTEGER { disable(1), -- (+1) adapt(2), enable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "radius accounting." ::= {nvRadconfEntry 6} nvRadconfNumdigits OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "trailing port digits." ::= {nvRadconfEntry 7} nvRadconfAuth1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address primary auth server." ::= {nvRadconfEntry 8} -- 9 is reserved nvRadconfAuth2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address secondary auth server." ::= {nvRadconfEntry 10} -- 11 is reserved nvRadconfAuth3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address tertiary auth server." ::= {nvRadconfEntry 12} -- 13 is reserved nvRadconfAcct1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address primary accounting." ::= {nvRadconfEntry 14 } -- 15 is reserved nvRadconfAcct2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address secondary accounting." ::= {nvRadconfEntry 16 } -- 17 is reserved nvRadconfAcct3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address tertiary accounting." ::= {nvRadconfEntry 18 } -- 19 is reserved nvRadconfAcctauth OBJECT-TYPE SYNTAX INTEGER { secret(1), -- (+1) zero(2) } ACCESS read-write STATUS mandatory DESCRIPTION "authorizarion encoding." ::= {nvRadconfEntry 20} nvRadconfAuth1port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "authserver port1 ." --AF ::= {nvRadconfEntry 21} --AF nvRadconfAuth2port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "authserver port2 ." --AF ::= {nvRadconfEntry 22} --AF nvRadconfAuth3port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "authserver port3 ." --AF ::= {nvRadconfEntry 23} --AF nvRadconfAcct1port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "account server port1 ." --AF ::= {nvRadconfEntry 24} --AF nvRadconfAcct2port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "account server port2 ." --AF ::= {nvRadconfEntry 25} --AF nvRadconfAcct3port OBJECT-TYPE --AF SYNTAX INTEGER --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "account server port3 ." --AF ::= {nvRadconfEntry 26} --AF nvRadconfAttrchk OBJECT-TYPE --AF SYNTAX INTEGER { --AF no(1), --AF yes(2) --AF } --AF ACCESS read-write --AF STATUS mandatory --AF DESCRIPTION --AF "Strict attribute checking." --AF ::= { nvRadconfEntry 27 } nvRadconfDnsatt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " attribute code for primary DNS server" ::= { nvRadconfEntry 28 } nvRadconfDnsatt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " attribute code for secondary DNS server" ::= { nvRadconfEntry 29 } nvRadconfNbnsatt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " attribute code for primary NBNS server" ::= { nvRadconfEntry 30} nvRadconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRadconfEntry 31 } nvRadconfNbnsatt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "attribute code for secondary NBNS server " ::= { nvRadconfEntry 32 } -- -- raduser file -- nvRaduser OBJECT IDENTIFIER ::= { nevadaRadius 2 } nvRaduserMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRaduser 1} nvRaduserNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRaduser 2} nvRaduserTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRaduserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "raduser file." ::= {nvRaduser 3} nvRaduserEntry OBJECT-TYPE SYNTAX NvRaduserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "raduser record, indexed by record number" INDEX {nvRaduserIndex} ::= {nvRaduserTable 1 } NvRaduserEntry ::= SEQUENCE { nvRaduserIndex INTEGER, nvRaduserUsername DisplayString, nvRaduserPasswd DisplayString, nvRaduserRespmsg INTEGER, nvRaduserStatus INTEGER } nvRaduserIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of raduser record" ::= {nvRaduserEntry 1} nvRaduserUsername OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "user name." ::= {nvRaduserEntry 2} nvRaduserPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "user password." ::= {nvRaduserEntry 3} nvRaduserRespmsg OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "stringid of response message." ::= {nvRaduserEntry 4} -- 5 - 14 reserved. nvRaduserStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRaduserEntry 15 } -- -- radcstat file -- nvRadcstat OBJECT IDENTIFIER ::= { nevadaRadius 3 } nvRadcstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRadcstat 1} nvRadcstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRadcstat 2} nvRadcstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRadcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radcstat file." ::= {nvRadcstat 3} nvRadcstatEntry OBJECT-TYPE SYNTAX NvRadcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radcstat record, indexed by record number" INDEX {nvRadcstatIndex} ::= {nvRadcstatTable 1 } NvRadcstatEntry ::= SEQUENCE { nvRadcstatIndex INTEGER, nvRadcstatRadAdminS INTEGER, nvRadcstatRadcOperS INTEGER, nvRadcstatNAuths DisplayString, nvRadcstatNAuthLocl DisplayString, nvRadcstatNAuthLost DisplayString, nvRadcstatNAuthRtry DisplayString, nvRadcstatNAuth1Acc DisplayString, nvRadcstatNAuth1Rej DisplayString, nvRadcstatNAuth2Acc DisplayString, nvRadcstatNAuth2Rej DisplayString, nvRadcstatNAuth3Acc DisplayString, nvRadcstatNAuth3Rej DisplayString, nvRadcstatNAcct DisplayString, nvRadcstatNAcctLost DisplayString, nvRadcstatNAcctRtry DisplayString, nvRadcstatNAcct1 DisplayString, nvRadcstatNAcct2 DisplayString, nvRadcstatNAcct3 DisplayString, nvRadcstatNSilent DisplayString, nvRadcstatDtreset DisplayString } nvRadcstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of radcstat record" ::= {nvRadcstatEntry 1} nvRadcstatRadAdminS OBJECT-TYPE SYNTAX INTEGER { down(1), -- (+1) up(2) } ACCESS read-only STATUS mandatory DESCRIPTION "radius admin status." ::= {nvRadcstatEntry 2} nvRadcstatRadcOperS OBJECT-TYPE SYNTAX INTEGER { down(1), -- (+1) up(2) } ACCESS read-only STATUS mandatory DESCRIPTION "radius operation status." ::= {nvRadcstatEntry 3} nvRadcstatNAuths OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth attempts." ::= {nvRadcstatEntry 4} nvRadcstatNAuthLocl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of local authorizations." ::= {nvRadcstatEntry 5} nvRadcstatNAuthLost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of authorization lost." ::= {nvRadcstatEntry 6} nvRadcstatNAuthRtry OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of authentication retr." ::= {nvRadcstatEntry 7} nvRadcstatNAuth1Acc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth accepts by auth1." ::= {nvRadcstatEntry 8} nvRadcstatNAuth1Rej OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth rejects by auth1." ::= {nvRadcstatEntry 9} nvRadcstatNAuth2Acc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth accepts by auth2." ::= {nvRadcstatEntry 10} nvRadcstatNAuth2Rej OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth rejects by auth2." ::= {nvRadcstatEntry 11} nvRadcstatNAuth3Acc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth accepts by auth3." ::= {nvRadcstatEntry 12} nvRadcstatNAuth3Rej OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of auth rejects by auth3." ::= {nvRadcstatEntry 13} nvRadcstatNAcct OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting msgs attempts." ::= {nvRadcstatEntry 14} nvRadcstatNAcctLost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting records lost." ::= {nvRadcstatEntry 15} nvRadcstatNAcctRtry OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting msgs retry." ::= {nvRadcstatEntry 16} nvRadcstatNAcct1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting msgs acct1." ::= {nvRadcstatEntry 17} nvRadcstatNAcct2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting msgs acct2." ::= {nvRadcstatEntry 18} nvRadcstatNAcct3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "number of accounting msgs acct3." ::= {nvRadcstatEntry 19} nvRadcstatNSilent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "num of silent discards" ::= {nvRadcstatEntry 20} nvRadcstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvRadcstatEntry 21 } -- -- radustat file -- nvRadustat OBJECT IDENTIFIER ::= { nevadaRadius 4 } nvRadustatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRadustat 1} nvRadustatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRadustat 2} nvRadustatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRadustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radustat file." ::= {nvRadustat 3} nvRadustatEntry OBJECT-TYPE SYNTAX NvRadustatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "radustat record, indexed by record number" INDEX {nvRadustatIndex} ::= {nvRadustatTable 1 } NvRadustatEntry ::= SEQUENCE { nvRadustatIndex INTEGER, nvRadustatRaduOperS INTEGER, nvRadustatSessionId DisplayString, nvRadustatUserId DisplayString, nvRadustatNasPort DisplayString, nvRadustatNasIpAddr DisplayString, nvRadustatFrmIpaddr DisplayString, nvRadustatFrmIpMask DisplayString, nvRadustatState DisplayString, nvRadustatClass DisplayString, nvRadustatSType INTEGER, nvRadustatFrmProto INTEGER, nvRadustatFrmRting INTEGER, nvRadustatSTime INTEGER, nvRadustatFrmMtu INTEGER, nvRadustatFrmRt INTEGER, nvRadustatSTimeout INTEGER, nvRadustatITimeout INTEGER, nvRadustatDFilter INTEGER, nvRadustatReqId DisplayString, nvRadustatDtreset DisplayString } nvRadustatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of radustat record" ::= {nvRadustatEntry 1} nvRadustatRaduOperS OBJECT-TYPE SYNTAX INTEGER { idle(1), -- (+1) open(2), ready(3), waiting(4), active(5), astart(6), astop(7) } ACCESS read-only STATUS mandatory DESCRIPTION "User operation/session status." ::= { nvRadustatEntry 2 } nvRadustatSessionId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "accounting session-id name." ::= {nvRadustatEntry 3} nvRadustatUserId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "user/host name of requestor." ::= {nvRadustatEntry 4} nvRadustatNasPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Called address." ::= {nvRadustatEntry 5} nvRadustatNasIpAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "NAS IP address." ::= {nvRadustatEntry 6} nvRadustatFrmIpaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Framed IP address." ::= {nvRadustatEntry 7} nvRadustatFrmIpMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Framed IP mask." ::= {nvRadustatEntry 8} -- 9, 10, 11, 12 reserved nvRadustatState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "state." ::= {nvRadustatEntry 13} nvRadustatClass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "class." ::= {nvRadustatEntry 14} nvRadustatSType OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) login(2), framed(3), callBackLogin(4), callBackFramed(5), outboundUser(6), adminUser(7), execUser(8), authOnly(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Service type." ::= { nvRadustatEntry 15 } -- 16 reserved nvRadustatFrmProto OBJECT-TYPE SYNTAX INTEGER { notSet(1), -- (+1) ppp(2), slip(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Framed protocol type." ::= { nvRadustatEntry 17 } nvRadustatFrmRting OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) sendRtPkt(2), listenRtPkt(3), sendListen(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Framed routing attribute type." ::= { nvRadustatEntry 18 } nvRadustatSTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Seconds the call was active." ::= { nvRadustatEntry 19 } nvRadustatFrmMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Framed mtu." ::= { nvRadustatEntry 20 } nvRadustatFrmRt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Framed route." ::= { nvRadustatEntry 21 } nvRadustatSTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session timeout." ::= { nvRadustatEntry 22 } nvRadustatITimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Idle timeout." ::= { nvRadustatEntry 23 } nvRadustatDFilter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Data filters." ::= { nvRadustatEntry 24 } nvRadustatReqId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "Request ID of outstanding radius msgs." ::= { nvRadustatEntry 25 } nvRadustatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvRadustatEntry 26 } -- -- SNMP -- -- -- snmpconf file -- nvSnmpconf OBJECT IDENTIFIER ::= { nevadaSnmp 1 } -- nvSnmpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvSnmpconf 1 } nvSnmpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvSnmpconf 2 } nvSnmpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSnmpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Snmpconf file." ::= { nvSnmpconf 3 } nvSnmpconfEntry OBJECT-TYPE SYNTAX NvSnmpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Snmpconf record." INDEX { nvSnmpconfIndex } ::= { nvSnmpconfTable 1 } NvSnmpconfEntry ::= SEQUENCE { nvSnmpconfIndex INTEGER, nvSnmpconflocation DisplayString, nvSnmpconfcontact DisplayString, nvSnmpconfsysname DisplayString, nvSnmpconfauthen INTEGER, nvSnmpconfstatus INTEGER } nvSnmpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nvSnmpconf record" ::= { nvSnmpconfEntry 1 } nvSnmpconflocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "Location " ::= { nvSnmpconfEntry 2 } nvSnmpconfcontact OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "contact " ::= { nvSnmpconfEntry 3 } nvSnmpconfsysname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "sysname " ::= { nvSnmpconfEntry 4 } nvSnmpconfauthen OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "authentication trap yes(1)/no(2) " ::= { nvSnmpconfEntry 5 } nvSnmpconfstatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvSnmpconfEntry 6 } -- -- -- snmpmgr file -- nvSnmpmgr OBJECT IDENTIFIER ::= { nevadaSnmp 2 } -- nvSnmpmgrMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvSnmpmgr 1 } nvSnmpmgrNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvSnmpmgr 2 } nvSnmpmgrTable OBJECT-TYPE SYNTAX SEQUENCE OF NvSnmpmgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Snmpmgr file." ::= { nvSnmpmgr 3 } nvSnmpmgrEntry OBJECT-TYPE SYNTAX NvSnmpmgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Snmpmgr record." INDEX { nvSnmpmgrIndex } ::= { nvSnmpmgrTable 1 } NvSnmpmgrEntry ::= SEQUENCE { nvSnmpmgrIndex INTEGER, nvSnmpmgrIp DisplayString, nvSnmpmgrComm DisplayString, nvSnmpmgrAccPriv INTEGER, nvSnmpmgrSndTrap INTEGER, nvSnmpmgrstatus INTEGER } nvSnmpmgrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nvSnmpmgr record" ::= { nvSnmpmgrEntry 1 } nvSnmpmgrIp OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address " ::= { nvSnmpmgrEntry 2 } nvSnmpmgrComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "community " ::= { nvSnmpmgrEntry 3 } nvSnmpmgrAccPriv OBJECT-TYPE SYNTAX INTEGER { ro(1), rw(2), wo(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Access priv " ::= { nvSnmpmgrEntry 4 } nvSnmpmgrSndTrap OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Send trap " ::= { nvSnmpmgrEntry 5 } nvSnmpmgrstatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvSnmpmgrEntry 6 } -- -- -- snmpstat file -- -- nvSnmpstat OBJECT IDENTIFIER ::= { nevadaSnmp 3 } -- -- -- pos -- nvPosprof OBJECT IDENTIFIER ::= { nevadaPos 1 } nvPosprofMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosprof 1} nvPosprofNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosprof 2} nvPosprofTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NEvada node posprof file." ::= { nvPosprof 3 } nvPosprofEntry OBJECT-TYPE SYNTAX NvPosprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posprof record." INDEX { nvPosprofIndex } ::= { nvPosprofTable 1 } NvPosprofEntry ::= SEQUENCE { nvPosprofIndex INTEGER, nvPosprofName DisplayString, nvPosprofSize INTEGER, nvPosprofNumchan INTEGER, nvPosprofPermchan INTEGER, nvPosprofDirection INTEGER, nvPosprofProtocol INTEGER, nvPosprofAddrtype INTEGER, nvPosprofUserdata DisplayString, nvPosprofMode INTEGER, nvPosprofIdletime INTEGER, nvPosprofRouting INTEGER, nvPosprofTranslate INTEGER, nvPosprofTpduaddr DisplayString, nvPosprofEftrspto INTEGER, nvPosprofRetrytim INTEGER, nvPosprofNretry INTEGER, nvPosprofActsupl INTEGER, nvPosprofResptim INTEGER, nvPosprofPolltim INTEGER, nvPosprofPolladdr DisplayString, nvPosprofSkip INTEGER, nvPosprofTcpmsglen INTEGER, nvPosprofPortname DisplayString, nvPosprofRsrcpool DisplayString, nvPosprofStatus INTEGER } nvPosprofIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nevada posprof record" ::= { nvPosprofEntry 1 } nvPosprofName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Profile Name." ::= { nvPosprofEntry 2 } nvPosprofSize OBJECT-TYPE SYNTAX INTEGER { b128(1), -- (+1) b256(2), -- b512(3), -- b1024(4), -- b2048(5), -- b4096(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "max bytes per frame Default value is 128 (0+1)." ::= { nvPosprofEntry 3 } nvPosprofNumchan OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max number of channels Default value is 1." ::= { nvPosprofEntry 4 } -- reserved 5 nvPosprofPermchan OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "min number of channels " ::= { nvPosprofEntry 6 } nvPosprofDirection OBJECT-TYPE SYNTAX INTEGER { uplink(1), -- this connection leads toward host (+1) dnlink(2), -- this connection leads toward terminal nmslink(3) -- used to forward nms messages } ACCESS read-write STATUS mandatory DESCRIPTION "up or down? Default value is dnlink (1+1)." ::= { nvPosprofEntry 7 } nvPosprofProtocol OBJECT-TYPE SYNTAX INTEGER { sdlc(1), -- simple SDLC subset (+1) x25(2), -- X.25 through nbus visa(3), -- visa terminal protocol tcp(4), -- TCP/IP through nbus spdh(5), dfono(6), dtfspc(7), dtfgen(8) } ACCESS read-write STATUS mandatory DESCRIPTION "protocol on port Default value is visa." ::= { nvPosprofEntry 8 } nvPosprofAddrtype OBJECT-TYPE SYNTAX INTEGER { none(1), -- use no address headder (+1) tpdu(2), -- use a TPDU to multiplex messages fast3(3), fast6(4) } ACCESS read-write STATUS mandatory DESCRIPTION "address header Default value is tpdu." ::= { nvPosprofEntry 9 } nvPosprofUserdata OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "call user data " ::= { nvPosprofEntry 10 } nvPosprofMode OBJECT-TYPE SYNTAX INTEGER { m8n1(1), -- use no address headder (+1) m7e1(2), -- use a TPDU to multiplex messages m7o1(3), m7m1(4), m7s1(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Mode of operation. Default is 7E1." ::= { nvPosprofEntry 11 } nvPosprofIdletime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max num secs channel can remain idle " ::= { nvPosprofEntry 12 } nvPosprofRouting OBJECT-TYPE SYNTAX INTEGER { datartg(1), -- route messages based upon their contents (+1) tpdurtg(2) -- route based on the TPDU } ACCESS read-write STATUS mandatory DESCRIPTION "look at data or tpdu? Default value is tpdurtg (1+1)." ::= { nvPosprofEntry 13 } nvPosprofTranslate OBJECT-TYPE SYNTAX INTEGER { none(1), -- no translation (+1) ascii(2), -- ebcdic to ascii ebcdic(3), -- ascii to ebcdic fastpos(4) -- ascii to ebcdic (for Fastpos) } ACCESS read-write STATUS mandatory DESCRIPTION "message translation." ::= { nvPosprofEntry 14 } nvPosprofTpduaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "use this when tpdu not supplied (but required)." ::= { nvPosprofEntry 15 } nvPosprofEftrspto OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "number of seconds before addr table entry cleared Default value is 300." ::= { nvPosprofEntry 16 } nvPosprofRetrytim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "retry timer Default value is 100." ::= { nvPosprofEntry 17 } nvPosprofNretry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max retry attempts Default value is 3." ::= { nvPosprofEntry 18 } nvPosprofActsupl OBJECT-TYPE SYNTAX INTEGER { none(1), -- sndnak(2), -- reverse(3), muzo(4), closelcn(5), fdr(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Action after responce is sent to terminal." ::= { nvPosprofEntry 19 } nvPosprofResptim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "host response timer Default value is 100." ::= { nvPosprofEntry 20 } nvPosprofPolltim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "poll timer Default value is 5." ::= { nvPosprofEntry 21 } nvPosprofPolladdr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "base poll address,hex " ::= { nvPosprofEntry 22 } nvPosprofSkip OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "number of cycles to skip for non-func device Default value is 4." ::= { nvPosprofEntry 23 } nvPosprofTcpmsglen OBJECT-TYPE SYNTAX INTEGER { none(1), -- (+1) vap(2), bin2(3), bin3(4), bin4(5) } ACCESS read-write STATUS mandatory DESCRIPTION "TCP msg header format. Default value is bin4." ::= { nvPosprofEntry 24 } nvPosprofPortname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of physical port or Device Usage Group." ::= { nvPosprofEntry 25 } nvPosprofRsrcpool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Resource Pool Name." ::= { nvPosprofEntry 26 } nvPosprofStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosprofEntry 27 } nvPosconf OBJECT IDENTIFIER ::= { nevadaPos 2 } nvPosconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosconf 1} nvPosconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosconf 2} nvPosconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NEvada node posconf file." ::= { nvPosconf 3 } nvPosconfEntry OBJECT-TYPE SYNTAX NvPosconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posprof record." INDEX { nvPosconfIndex } ::= { nvPosconfTable 1 } NvPosconfEntry ::= SEQUENCE { nvPosconfIndex INTEGER, nvPosconfName DisplayString, nvPosconfEnable INTEGER, nvPosconfProfile DisplayString, nvPosconfStatus INTEGER } nvPosconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nevada posconf record" ::= { nvPosconfEntry 1 } nvPosconfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "either POS# or X.121 Address." ::= { nvPosconfEntry 2 } nvPosconfEnable OBJECT-TYPE SYNTAX INTEGER { no(1), -- (+1) yes(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Enabled or not." ::= { nvPosconfEntry 3 } nvPosconfProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of profile (in posprof) being used." ::= { nvPosconfEntry 4 } nvPosconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosconfEntry 5 } nvPosmsgmap OBJECT IDENTIFIER ::= { nevadaPos 3 } nvPosmsgmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosmsgmap 1} nvPosmsgmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosmsgmap 2} nvPosmsgmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosmsgmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posmsgmap file." ::= { nvPosmsgmap 3 } nvPosmsgmapEntry OBJECT-TYPE SYNTAX NvPosmsgmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node posmsgmap record." INDEX { nvPosmsgmapIndex } ::= { nvPosmsgmapTable 1 } NvPosmsgmapEntry ::= SEQUENCE { nvPosmsgmapIndex INTEGER, nvPosmsgmapPattern INTEGER, nvPosmsgmapDest DisplayString, nvPosmsgmapStatus INTEGER } nvPosmsgmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nevada posmsgmap record" ::= { nvPosmsgmapEntry 1 } nvPosmsgmapPattern OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "pointer to pattern in string storage " ::= { nvPosmsgmapEntry 2 } nvPosmsgmapDest OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "port/link or X.121 address " ::= { nvPosmsgmapEntry 3 } nvPosmsgmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosmsgmapEntry 4 } nvPosniimap OBJECT IDENTIFIER ::= { nevadaPos 4 } nvPosniimapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosniimap 1} nvPosniimapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosniimap 2} nvPosniimapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosniimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node posniimap file." ::= { nvPosniimap 3 } nvPosniimapEntry OBJECT-TYPE SYNTAX NvPosniimapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posniimap record." INDEX { nvPosniimapIndex } ::= { nvPosniimapTable 1 } NvPosniimapEntry ::= SEQUENCE { nvPosniimapIndex INTEGER, nvPosniimapTpduaddr DisplayString, nvPosniimapDest DisplayString, nvPosniimapStatus INTEGER } nvPosniimapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nevada posniimap record" ::= { nvPosniimapEntry 1 } nvPosniimapTpduaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "NII value to match " ::= { nvPosniimapEntry 2 } nvPosniimapDest OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "port/link or X.121 address " ::= { nvPosniimapEntry 3 } nvPosniimapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosniimapEntry 4 } nvPosnmsmap OBJECT IDENTIFIER ::= { nevadaPos 5 } nvPosnmsmapMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosnmsmap 1} nvPosnmsmapNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosnmsmap 2} nvPosnmsmapTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosnmsmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node posnmsmap file." ::= { nvPosnmsmap 3 } nvPosnmsmapEntry OBJECT-TYPE SYNTAX NvPosnmsmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node posnmsmap record." INDEX { nvPosnmsmapIndex } ::= { nvPosnmsmapTable 1 } NvPosnmsmapEntry ::= SEQUENCE { nvPosnmsmapIndex INTEGER, nvPosnmsmapNmsid DisplayString, nvPosnmsmapDest DisplayString, nvPosnmsmapStatus INTEGER } nvPosnmsmapIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of nevada posnmsmap record" ::= { nvPosnmsmapEntry 1 } nvPosnmsmapNmsid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "two digit hex NMS ID " ::= { nvPosnmsmapEntry 2 } nvPosnmsmapDest OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "port/link or X.121 address " ::= { nvPosnmsmapEntry 3 } nvPosnmsmapStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosnmsmapEntry 4 } nvPosiso OBJECT IDENTIFIER ::= { nevadaPos 6 } nvPosisoMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosiso 1} nvPosisoNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosiso 2} nvPosisoTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosisoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "nevada node posiso file." ::= { nvPosiso 3 } nvPosisoEntry OBJECT-TYPE SYNTAX NvPosisoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "navada node posiso record." INDEX { nvPosisoIndex } ::= { nvPosisoTable 1 } NvPosisoEntry ::= SEQUENCE { nvPosisoIndex INTEGER, nvPosisoName DisplayString, nvPosisoContrec INTEGER, nvPosisoField2 INTEGER, nvPosisoField3 INTEGER, nvPosisoField4 INTEGER, nvPosisoField5 INTEGER, nvPosisoField6 INTEGER, nvPosisoField7 INTEGER, nvPosisoField8 INTEGER, nvPosisoField9 INTEGER, nvPosisoField10 INTEGER, nvPosisoField11 INTEGER, nvPosisoField12 INTEGER, nvPosisoField13 INTEGER, nvPosisoField14 INTEGER, nvPosisoField15 INTEGER, nvPosisoField16 INTEGER, nvPosisoField17 INTEGER, nvPosisoField18 INTEGER, nvPosisoField19 INTEGER, nvPosisoField20 INTEGER, nvPosisoField21 INTEGER, nvPosisoField22 INTEGER, nvPosisoField23 INTEGER, nvPosisoField24 INTEGER, nvPosisoField25 INTEGER, nvPosisoField26 INTEGER, nvPosisoField27 INTEGER, nvPosisoField28 INTEGER, nvPosisoField29 INTEGER, nvPosisoField30 INTEGER, nvPosisoField31 INTEGER, nvPosisoField32 INTEGER, nvPosisoField33 INTEGER, nvPosisoField34 INTEGER, nvPosisoField35 INTEGER, nvPosisoField36 INTEGER, nvPosisoField37 INTEGER, nvPosisoField38 INTEGER, nvPosisoField39 INTEGER, nvPosisoField40 INTEGER, nvPosisoField41 INTEGER, nvPosisoField42 INTEGER, nvPosisoField43 INTEGER, nvPosisoField44 INTEGER, nvPosisoField45 INTEGER, nvPosisoField46 INTEGER, nvPosisoField47 INTEGER, nvPosisoField48 INTEGER, nvPosisoField49 INTEGER, nvPosisoField50 INTEGER, nvPosisoField51 INTEGER, nvPosisoField52 INTEGER, nvPosisoField53 INTEGER, nvPosisoField54 INTEGER, nvPosisoField55 INTEGER, nvPosisoField56 INTEGER, nvPosisoField57 INTEGER, nvPosisoField58 INTEGER, nvPosisoField59 INTEGER, nvPosisoField60 INTEGER, nvPosisoField61 INTEGER, nvPosisoField62 INTEGER, nvPosisoField63 INTEGER, nvPosisoField64 INTEGER, nvPosisoStatus INTEGER } nvPosisoIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Nevada posiso record" ::= { nvPosisoEntry 1 } nvPosisoName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "used to identify record " ::= { nvPosisoEntry 2 } nvPosisoContrec OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "pointer to continuation record Default value is 0." ::= { nvPosisoEntry 3 } nvPosisoField2 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 4 } nvPosisoField3 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 5 } nvPosisoField4 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 6 } nvPosisoField5 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 7 } nvPosisoField6 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 8 } nvPosisoField7 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 9 } nvPosisoField8 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 10 } nvPosisoField9 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 11 } nvPosisoField10 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 12 } nvPosisoField11 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 13 } nvPosisoField12 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 14 } nvPosisoField13 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 15 } nvPosisoField14 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 16 } nvPosisoField15 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 17 } nvPosisoField16 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 18 } nvPosisoField17 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 19 } nvPosisoField18 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 20 } nvPosisoField19 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 21 } nvPosisoField20 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 22 } nvPosisoField21 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 23 } nvPosisoField22 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 24 } nvPosisoField23 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 25 } nvPosisoField24 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 26 } nvPosisoField25 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 27 } nvPosisoField26 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 28 } nvPosisoField27 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 29 } nvPosisoField28 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 30 } nvPosisoField29 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 31 } nvPosisoField30 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 32 } nvPosisoField31 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 33 } nvPosisoField32 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 34 } nvPosisoField33 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 35 } nvPosisoField34 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 36 } nvPosisoField35 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 37 } nvPosisoField36 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 38 } nvPosisoField37 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 39 } nvPosisoField38 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 40 } nvPosisoField39 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 41 } nvPosisoField40 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 42 } nvPosisoField41 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 43 } nvPosisoField42 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 44 } nvPosisoField43 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 45 } nvPosisoField44 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 46 } nvPosisoField45 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 47 } nvPosisoField46 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 48 } nvPosisoField47 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 49 } nvPosisoField48 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 50 } nvPosisoField49 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 51 } nvPosisoField50 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 52 } nvPosisoField51 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 53 } nvPosisoField52 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 54 } nvPosisoField53 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 55 } nvPosisoField54 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 56 } nvPosisoField55 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 57 } nvPosisoField56 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 58 } nvPosisoField57 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 59 } nvPosisoField58 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 60 } nvPosisoField59 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 61 } nvPosisoField60 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 62 } nvPosisoField61 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 63 } nvPosisoField62 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 64 } nvPosisoField63 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 65 } nvPosisoField64 OBJECT-TYPE SYNTAX NvIsoType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosisoEntry 66 } nvPosisoStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosisoEntry 67 } nvPosvisa OBJECT IDENTIFIER ::= { nevadaPos 7 } nvPosvisaMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosvisa 1} nvPosvisaNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosvisa 2} nvPosvisaTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosvisaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posvisa file." ::= { nvPosvisa 3 } nvPosvisaEntry OBJECT-TYPE SYNTAX NvPosvisaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posvisa record." INDEX { nvPosvisaIndex } ::= { nvPosvisaTable 1 } NvPosvisaEntry ::= SEQUENCE { nvPosvisaIndex INTEGER, nvPosvisaName DisplayString, nvPosvisaField1 INTEGER, nvPosvisaField2 INTEGER, nvPosvisaField3 INTEGER, nvPosvisaField4 INTEGER, nvPosvisaField5 INTEGER, nvPosvisaField6 INTEGER, nvPosvisaField7 INTEGER, nvPosvisaField8 INTEGER, nvPosvisaField9 INTEGER, nvPosvisaField10 INTEGER, nvPosvisaField11 INTEGER, nvPosvisaField12 INTEGER, nvPosvisaField13 INTEGER, nvPosvisaField14 INTEGER, nvPosvisaField15 INTEGER, nvPosvisaField16 INTEGER, nvPosvisaField17 INTEGER, nvPosvisaField18 INTEGER, nvPosvisaField19 INTEGER, nvPosvisaField20 INTEGER, nvPosvisaStatus INTEGER } nvPosvisaIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Nevada posvisa record" ::= { nvPosvisaEntry 1 } nvPosvisaName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "used to identify record " ::= { nvPosvisaEntry 2 } nvPosvisaField1 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "description of a single field " ::= { nvPosvisaEntry 3 } nvPosvisaField2 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 4 } nvPosvisaField3 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 5 } nvPosvisaField4 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 6 } nvPosvisaField5 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 7 } nvPosvisaField6 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 8 } nvPosvisaField7 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 9 } nvPosvisaField8 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 10 } nvPosvisaField9 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 11 } nvPosvisaField10 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 12 } nvPosvisaField11 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 13 } nvPosvisaField12 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 14 } nvPosvisaField13 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 15 } nvPosvisaField14 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 16 } nvPosvisaField15 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 17 } nvPosvisaField16 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 18 } nvPosvisaField17 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 19 } nvPosvisaField18 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 20 } nvPosvisaField19 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 21 } nvPosvisaField20 OBJECT-TYPE SYNTAX NvVisaType ACCESS read-write STATUS mandatory DESCRIPTION "same as field1 " ::= { nvPosvisaEntry 22 } nvPosvisaStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvPosvisaEntry 23 } nvPosstat OBJECT IDENTIFIER ::= { nevadaPos 8 } nvPosstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= { nvPosstat 1} nvPosstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= { nvPosstat 2} nvPosstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvPosstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posstat file." ::= { nvPosstat 3 } nvPosstatEntry OBJECT-TYPE SYNTAX NvPosstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada node posstat record." INDEX { nvPosstatIndex } ::= { nvPosstatTable 1 } NvPosstatEntry ::= SEQUENCE { nvPosstatIndex INTEGER, nvPosstatName DisplayString, nvPosstatNactivchn INTEGER, nvPosstatProtocol INTEGER, nvPosstatNumcalls INTEGER, nvPosstatNfailcall INTEGER, nvPosstatNumimsgs INTEGER, nvPosstatNumomsgs INTEGER, nvPosstatEftreqs INTEGER, nvPosstatEftrsps INTEGER, nvPosstatNmsreqs INTEGER, nvPosstatNmsrsps INTEGER, nvPosstatNodatart INTEGER, nvPosstatNotpdurt INTEGER, nvPosstatInvrqtpdu INTEGER, nvPosstatNousdest INTEGER, nvPosstatQueued INTEGER, nvPosstatCommfail INTEGER, nvPosstatInvrstpdu INTEGER, nvPosstatDnlnkfail INTEGER, nvPosstatRspnomtch INTEGER, nvPosstatConnfail INTEGER, nvPosstatRsptimout INTEGER, nvPosstatNmsbaddst INTEGER, nvPosstatNmsbadhst INTEGER, nvPosstatNbadframes INTEGER, nvPosstatNtoolong INTEGER, nvPosstatDtreset DisplayString } nvPosstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Nevada posstat record" ::= { nvPosstatEntry 1 } nvPosstatName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "port/link or X.121 address (matches posconf) " ::= { nvPosstatEntry 2 } nvPosstatNactivchn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of active channels Initial status is 0." ::= { nvPosstatEntry 3 } nvPosstatProtocol OBJECT-TYPE SYNTAX INTEGER { sdlc(1), -- simple SDLC subset (+1) x25(2), -- X.25 through nbus visa(3), -- visa terminal protocol tcp(4), -- TCP/IP through nbus spdh(5), dfono(6), dtfspc(7), dtfgen(8) } ACCESS read-only STATUS mandatory DESCRIPTION "protocol on port " ::= { nvPosstatEntry 4 } nvPosstatNumcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of calls Statistic is zeroed at startup time." ::= { nvPosstatEntry 5 } nvPosstatNfailcall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of failed calls Statistic is zeroed at startup time." ::= { nvPosstatEntry 6 } nvPosstatNumimsgs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of messages from device Statistic is zeroed at startup time." ::= { nvPosstatEntry 7 } nvPosstatNumomsgs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of messages to device Statistic is zeroed at startup time." ::= { nvPosstatEntry 8 } nvPosstatEftreqs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of EFT requests Statistic is zeroed at startup time." ::= { nvPosstatEntry 9 } nvPosstatEftrsps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of EFT responses Statistic is zeroed at startup time." ::= { nvPosstatEntry 10 } nvPosstatNmsreqs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of NMS requests Statistic is zeroed at startup time." ::= { nvPosstatEntry 11 } nvPosstatNmsrsps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of NMS responses Statistic is zeroed at startup time." ::= { nvPosstatEntry 12 } nvPosstatNodatart OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs discarded becaues msg switch could find route Statistic is zeroed at startup time." ::= { nvPosstatEntry 13 } nvPosstatNotpdurt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs discarded because no match to posniimap entry Statistic is zeroed at startup time." ::= { nvPosstatEntry 14 } nvPosstatInvrqtpdu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs discarded because of bad TPDUs Statistic is zeroed at startup time." ::= { nvPosstatEntry 15 } nvPosstatNousdest OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs discarded because destination couldn't be matched Statistic is zeroed at startup time." ::= { nvPosstatEntry 16 } nvPosstatQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs discarded because all dest channels or TDPU IDs in use Statistic is zeroed at startup time." ::= { nvPosstatEntry 17 } nvPosstatCommfail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT reqs that couldn't be delivered due to comm failure Statistic is zeroed at startup time." ::= { nvPosstatEntry 18 } nvPosstatInvrstpdu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT rsps discarded because they did not contain valid TPDUs Statistic is zeroed at startup time." ::= { nvPosstatEntry 19 } nvPosstatDnlnkfail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT rsps discarded because they did not match any request Statistic is zeroed at startup time." ::= { nvPosstatEntry 20 } nvPosstatRspnomtch OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT rsps discarded because they did not match any request Statistic is zeroed at startup time." ::= { nvPosstatEntry 21 } nvPosstatConnfail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT requests lost because of connection failures Statistic is zeroed at startup time." ::= { nvPosstatEntry 22 } nvPosstatRsptimout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "EFT rsps (map table entries) that were timed out (response lost) Statistic is zeroed at startup time." ::= { nvPosstatEntry 23 } nvPosstatNmsbaddst OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NMS reqs with bad destination addresses Statistic is zeroed at startup time." ::= { nvPosstatEntry 24 } nvPosstatNmsbadhst OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time." ::= { nvPosstatEntry 25 } nvPosstatNbadframes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time." ::= { nvPosstatEntry 26 } nvPosstatNtoolong OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time." ::= { nvPosstatEntry 27 } nvPosstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvPosstatEntry 28 } -- -- APACS -- -- -- apacsconf -- nvApacsconf OBJECT IDENTIFIER ::= { nevadaApacs 1 } nvApacsconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApacsconf 1} nvApacsconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApacsconf 2} nvApacsconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApacsconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apacsconf file." ::= { nvApacsconf 3 } nvApacsconfEntry OBJECT-TYPE SYNTAX NvApacsconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apacsconf record." INDEX { nvApacsconfIndex } ::= { nvApacsconfTable 1 } NvApacsconfEntry ::= SEQUENCE { nvApacsconfIndex INTEGER, nvApacsconfNodename DisplayString, nvApacsconfSitename DisplayString, nvApacsconfHelpphone DisplayString, nvApacsconfReserve1 DisplayString, nvApacsconfBillingT1 INTEGER, nvApacsconfBillingT2 INTEGER, nvApacsconfBillingT3 INTEGER, nvApacsconfBillingT4 INTEGER, nvApacsconfBillingT5 INTEGER, nvApacsconfBillingT6 INTEGER, nvApacsconfDlrtries INTEGER, nvApacsconfTimerA INTEGER, nvApacsconfTimerB INTEGER, nvApacsconfTimerC INTEGER, nvApacsconfDscdleeot INTEGER, nvApacsconfParerrall INTEGER, nvApacsconfStatus INTEGER } nvApacsconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Apacsconf record" ::= { nvApacsconfEntry 1 } nvApacsconfNodename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "For display purpose only Not used by Apacs software " ::= { nvApacsconfEntry 2 } nvApacsconfSitename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "For display purpose only Not used by Apacs software other than in generating alarms " ::= { nvApacsconfEntry 3 } nvApacsconfHelpphone OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "For display purpose in INF help message. Phone number of cardway help desk " ::= { nvApacsconfEntry 4 } nvApacsconfReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "OBSOLETE - removed field." ::= { nvApacsconfEntry 5 } nvApacsconfBillingT1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 500 " ::= { nvApacsconfEntry 6 } nvApacsconfBillingT2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 1000 " ::= { nvApacsconfEntry 7 } nvApacsconfBillingT3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 1500 " ::= { nvApacsconfEntry 8 } nvApacsconfBillingT4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 2000 " ::= { nvApacsconfEntry 9 } nvApacsconfBillingT5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 3000 " ::= { nvApacsconfEntry 10 } nvApacsconfBillingT6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Call duration timer limit for billing ( in 100th secs ) Default value of 6000 " ::= { nvApacsconfEntry 11 } nvApacsconfDlrtries OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " number of retries to deliver data before disconnecting Default value of 0 -- nevada retries 6 times by default" ::= { nvApacsconfEntry 13 } nvApacsconfTimerA OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " time in sec,for timer A Default value of 5 " ::= { nvApacsconfEntry 14 } nvApacsconfTimerB OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " time in sec,for timer A Default value of 10 " ::= { nvApacsconfEntry 15 } nvApacsconfTimerC OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " time in sec,for timer A Default value of 40 " ::= { nvApacsconfEntry 16 } nvApacsconfDscdleeot OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvApacsconfEntry 17 } nvApacsconfParerrall OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvApacsconfEntry 18 } nvApacsconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvApacsconfEntry 19 } -- -- anuaconf -- nvAnuaconf OBJECT IDENTIFIER ::= { nevadaApacs 2 } nvAnuaconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvAnuaconf 1} nvAnuaconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvAnuaconf 2} nvAnuaconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvAnuaconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Anuaconf file." ::= { nvAnuaconf 3 } nvAnuaconfEntry OBJECT-TYPE SYNTAX NvAnuaconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Anuaconf record." INDEX { nvAnuaconfIndex } ::= { nvAnuaconfTable 1 } NvAnuaconfEntry ::= SEQUENCE { nvAnuaconfIndex INTEGER, nvAnuaconfLabel1 DisplayString, nvAnuaconfReserve1 DisplayString, nvAnuaconfNuaAddress DisplayString, nvAnuaconfAltLabel DisplayString, nvAnuaconfRsvrReverse INTEGER, nvAnuaconfRedirect INTEGER, nvAnuaconfRetries INTEGER, nvAnuaconfPreempt INTEGER, nvAnuaconfMaxpsze INTEGER, nvAnuaconfStrippar INTEGER, nvAnuaconfStatus INTEGER } nvAnuaconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Anuaconf record" ::= { nvAnuaconfEntry 1 } nvAnuaconfLabel1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Identifier to match alternate label in case of redirection " ::= { nvAnuaconfEntry 2 } nvAnuaconfReserve1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "OBSOLETE - removed field." ::= { nvAnuaconfEntry 3 } nvAnuaconfNuaAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Null terminated ascii string, used ot match the address string received from the terminal and/or the x.121 address of the x.25 call placed to the host " ::= { nvAnuaconfEntry 4 } nvAnuaconfAltLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION " indicates the label1 of the anuaconf record to be used for redirection " ::= { nvAnuaconfEntry 5 } nvAnuaconfRsvrReverse OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " reverse charging indication default value is no " ::= { nvAnuaconfEntry 6 } nvAnuaconfRedirect OBJECT-TYPE SYNTAX INTEGER { no(1), immed(2), fail(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Condition for redirecting call default value is no " ::= { nvAnuaconfEntry 7 } nvAnuaconfRetries OBJECT-TYPE SYNTAX INTEGER (0..20) ACCESS read-write STATUS mandatory DESCRIPTION " number of call retries default value is 2 " ::= { nvAnuaconfEntry 8 } nvAnuaconfPreempt OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Call preemption indication default value is no " ::= { nvAnuaconfEntry 9 } nvAnuaconfMaxpsze OBJECT-TYPE SYNTAX INTEGER { psze-128(8), -- enum size 128 bytes psze-256(9), psze-512(10), psze-1024(11), psze-2048(12), psze-4096(13) } ACCESS read-write STATUS mandatory DESCRIPTION " Maximum message size default value is 256 " ::= { nvAnuaconfEntry 10 } nvAnuaconfStrippar OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Strip parity bit ? default value is no " ::= { nvAnuaconfEntry 11 } nvAnuaconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvAnuaconfEntry 12 } -- -- abillstat -- nvAbillstat OBJECT IDENTIFIER ::= { nevadaApacs 3 } nvAbillstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvAbillstat 1} nvAbillstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvAbillstat 2} nvAbillstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvAbillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Abillstat file." ::= { nvAbillstat 3 } nvAbillstatEntry OBJECT-TYPE SYNTAX NvAbillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Abillstat record." INDEX { nvAbillstatIndex } ::= { nvAbillstatTable 1 } NvAbillstatEntry ::= SEQUENCE { nvAbillstatIndex INTEGER, nvAbillstatNua DisplayString, nvAbillstatTbcalls INTEGER, nvAbillstatTbtime INTEGER, nvAbillstatTfail INTEGER, nvAbillstatTxbytes INTEGER, nvAbillstatRxbytes INTEGER, nvAbillstatB1call INTEGER, nvAbillstatB1time INTEGER, nvAbillstatB2call INTEGER, nvAbillstatB2time INTEGER, nvAbillstatB3call INTEGER, nvAbillstatB3time INTEGER, nvAbillstatB4call INTEGER, nvAbillstatB4time INTEGER, nvAbillstatB5call INTEGER, nvAbillstatB5time INTEGER, nvAbillstatB6call INTEGER, nvAbillstatB6time INTEGER, nvAbillstatB7call INTEGER, nvAbillstatB7time INTEGER, nvAbillstatPbcalls INTEGER, nvAbillstatPbtime INTEGER, nvAbillstatPfail INTEGER, nvAbillstatPtxbytes INTEGER, nvAbillstatPrxbytes INTEGER, nvAbillstatP1call INTEGER, nvAbillstatP1time INTEGER, nvAbillstatP2call INTEGER, nvAbillstatP2time INTEGER, nvAbillstatP3call INTEGER, nvAbillstatP3time INTEGER, nvAbillstatP4call INTEGER, nvAbillstatP4time INTEGER, nvAbillstatP5call INTEGER, nvAbillstatP5time INTEGER, nvAbillstatP6call INTEGER, nvAbillstatP6time INTEGER, nvAbillstatP7call INTEGER, nvAbillstatP7time INTEGER, nvAbillstatDtreset DisplayString } nvAbillstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Abillstat record" ::= { nvAbillstatEntry 1 } nvAbillstatNua OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION " Network User Address " ::= { nvAbillstatEntry 2 } nvAbillstatTbcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total number of calls to this nua " ::= { nvAbillstatEntry 3 } nvAbillstatTbtime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time to this nua in 100th of second " ::= { nvAbillstatEntry 4 } nvAbillstatTfail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of failed call request " ::= { nvAbillstatEntry 5 } nvAbillstatTxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of bytes of data Transmitted to this nua " ::= { nvAbillstatEntry 6 } nvAbillstatRxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of bytes of data received from this nua " ::= { nvAbillstatEntry 7 } nvAbillstatB1call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b1 " ::= { nvAbillstatEntry 8 } nvAbillstatB1time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b1 (100th of sec) " ::= { nvAbillstatEntry 9 } nvAbillstatB2call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b2 " ::= { nvAbillstatEntry 10 } nvAbillstatB2time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b2 (100th of sec) " ::= { nvAbillstatEntry 11 } nvAbillstatB3call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b3 " ::= { nvAbillstatEntry 12 } nvAbillstatB3time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b3 (100th of sec) " ::= { nvAbillstatEntry 13 } nvAbillstatB4call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b4 " ::= { nvAbillstatEntry 14 } nvAbillstatB4time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b4 (100th of sec) " ::= { nvAbillstatEntry 15 } nvAbillstatB5call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b5 " ::= { nvAbillstatEntry 16 } nvAbillstatB5time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b5 (100th of sec) " ::= { nvAbillstatEntry 17 } nvAbillstatB6call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b7 " ::= { nvAbillstatEntry 18 } nvAbillstatB6time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b6 (100th of sec) " ::= { nvAbillstatEntry 19 } nvAbillstatB7call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b7 " ::= { nvAbillstatEntry 20 } nvAbillstatB7time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total time for calls greater than timer b7 (100th of sec) " ::= { nvAbillstatEntry 21 } nvAbillstatPbcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 22 } nvAbillstatPbtime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 23 } nvAbillstatPfail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 24 } nvAbillstatPtxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 25 } nvAbillstatPrxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 26 } nvAbillstatP1call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 27 } nvAbillstatP1time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 28 } nvAbillstatP2call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 29 } nvAbillstatP2time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 30 } nvAbillstatP3call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 31 } nvAbillstatP3time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 32 } nvAbillstatP4call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 33 } nvAbillstatP4time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 34 } nvAbillstatP5call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 35 } nvAbillstatP5time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 36 } nvAbillstatP6call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 37 } nvAbillstatP6time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 38 } nvAbillstatP7call OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 39 } nvAbillstatP7time OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { nvAbillstatEntry 40 } nvAbillstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvAbillstatEntry 41 } -- -- apmdmstat -- nvApmdmstat OBJECT IDENTIFIER ::= { nevadaApacs 4 } nvApmdmstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApmdmstat 1} nvApddmstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApmdmstat 2} nvApmdmstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApmdmstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apmdmstat file." ::= { nvApmdmstat 3 } nvApmdmstatEntry OBJECT-TYPE SYNTAX NvApmdmstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apmdmstat record." INDEX { nvApmdmstatIndex } ::= { nvApmdmstatTable 1 } NvApmdmstatEntry ::= SEQUENCE { nvApmdmstatIndex INTEGER, nvApmdmstatSpeed INTEGER, nvApmdmstatTbcalls INTEGER, nvApmdmstatSuccess INTEGER, nvApmdmstatHostclr INTEGER, nvApmdmstatNwclr INTEGER, nvApmdmstatFltrain INTEGER, nvApmdmstatFlsess INTEGER, nvApmdmstatTxpkt INTEGER, nvApmdmstatRxpkt INTEGER, nvApmdmstatTxbytes INTEGER, nvApmdmstatRxbytes INTEGER, nvApmdmstatB1calls INTEGER, nvApmdmstatB2calls INTEGER, nvApmdmstatB3calls INTEGER, nvApmdmstatB4calls INTEGER, nvApmdmstatB5calls INTEGER, nvApmdmstatB6calls INTEGER, nvApmdmstatB7calls INTEGER, nvApmdmstatDtreset DisplayString } nvApmdmstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Index -- db record " ::= { nvApmdmstatEntry 1 } nvApmdmstatSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Modem speed " ::= { nvApmdmstatEntry 2 } nvApmdmstatTbcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Total Number of calls at this speed " ::= { nvApmdmstatEntry 3 } nvApmdmstatSuccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of successful connections " ::= { nvApmdmstatEntry 4 } nvApmdmstatHostclr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls cleared by the Host " ::= { nvApmdmstatEntry 5 } nvApmdmstatNwclr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls cleared by the network " ::= { nvApmdmstatEntry 6 } nvApmdmstatFltrain OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls that failed to train " ::= { nvApmdmstatEntry 7 } nvApmdmstatFlsess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number with no A-block " ::= { nvApmdmstatEntry 8 } nvApmdmstatTxpkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of x.25 packet Tx " ::= { nvApmdmstatEntry 9 } nvApmdmstatRxpkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of x.25 packet Rx " ::= { nvApmdmstatEntry 10 } nvApmdmstatTxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of x.25 bytes of data Tx " ::= { nvApmdmstatEntry 11 } nvApmdmstatRxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of x.25 bytes of data rx " ::= { nvApmdmstatEntry 12 } nvApmdmstatB1calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b1 " ::= { nvApmdmstatEntry 13 } nvApmdmstatB2calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b2 " ::= { nvApmdmstatEntry 14 } nvApmdmstatB3calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b3 " ::= { nvApmdmstatEntry 15 } nvApmdmstatB4calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b4 " ::= { nvApmdmstatEntry 16 } nvApmdmstatB5calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b5 " ::= { nvApmdmstatEntry 17 } nvApmdmstatB6calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b6 " ::= { nvApmdmstatEntry 18 } nvApmdmstatB7calls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Number of calls greater than call duration timer b7 " ::= { nvApmdmstatEntry 19 } nvApmdmstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvApmdmstatEntry 20 } -- -- -- apacsstat -- nvApacsstat OBJECT IDENTIFIER ::= { nevadaApacs 5 } nvApacsstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApacsstat 1} nvApacsstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApacsstat 2} nvApacsstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApacsstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apacsstat file." ::= { nvApacsstat 3 } nvApacsstatEntry OBJECT-TYPE SYNTAX NvApacsstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apacsstat record." INDEX { nvApacsstatIndex } ::= { nvApacsstatTable 1 } NvApacsstatEntry ::= SEQUENCE { nvApacsstatIndex INTEGER, nvApacsstatNidle INTEGER, nvApacsstatNxidle INTEGER, nvApacsstatCursimul INTEGER, nvApacsstatResetdate DisplayString, nvApacsstatTcalls INTEGER, nvApacsstatTxnaks INTEGER, nvApacsstatRxnaks INTEGER, nvApacsstatTxbytes INTEGER, nvApacsstatRxbytes INTEGER, nvApacsstatCallrcv INTEGER, nvApacsstatFailneg INTEGER, nvApacsstatNoadrblk INTEGER, nvApacsstatInvadrblk INTEGER, nvApacsstatNonuamtch INTEGER, nvApacsstatTrmdscsu INTEGER, nvApacsstatLoscarsu INTEGER, nvApacsstatParerrsu -- NR INTEGER, nvApacsstatGdadrblks INTEGER, nvApacsstatX25clrcip INTEGER, nvApacsstatActtmocip INTEGER, nvApacsstatTrmdsccip INTEGER, nvApacsstatLoscarcip INTEGER, nvApacsstatLrcerrcip INTEGER, nvApacsstatParerrcip -- RN INTEGER, nvApacsstatTmoerrcip INTEGER, nvApacsstatX25conns INTEGER, nvApacsstatX25clrdat INTEGER, nvApacsstatActtmodat INTEGER, nvApacsstatTrmdscdat INTEGER, nvApacsstatLoscardat INTEGER, nvApacsstatDscnoack INTEGER, nvApacsstatDscexcnak INTEGER, nvApacsstatLrcerrdat INTEGER, nvApacsstatParerrdat -- RN INTEGER, nvApacsstatBdhostblk INTEGER, nvApacsstatTrmnodat INTEGER, nvApacsstatHostnodat INTEGER, nvApacsstatTrmnoack INTEGER, nvApacsstatRetrntmo INTEGER, nvApacsstatRetrnnak INTEGER, nvApacsstatTxenqs INTEGER, nvApacsstatDleeotsnt INTEGER, nvApacsstatDleeotrcv INTEGER, nvApacsstatUnxhstclr INTEGER, nvApacsstatNwadrblks INTEGER, nvApacsstatRjadrblks INTEGER, nvApacsstatNonuaentr INTEGER, nvApacsstatMaxsimul INTEGER, nvApacsstatN300bd INTEGER, nvApacsstatN1200bd INTEGER, nvApacsstatN2400bd INTEGER, nvApacsstatN9600bd INTEGER, nvApacsstatN14400bd INTEGER, nvApacsstatN28800bd INTEGER, nvApacsstatSimultime --AF DisplayString, --AF nvApacsstatDtreset DisplayString } nvApacsstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index " ::= { nvApacsstatEntry 1 } nvApacsstatNidle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of iti ports in idle state " ::= { nvApacsstatEntry 2 } nvApacsstatNxidle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 3 } nvApacsstatCursimul OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 4 } nvApacsstatResetdate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 5 } nvApacsstatTcalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 6 } nvApacsstatTxnaks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 7 } nvApacsstatRxnaks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 8 } nvApacsstatTxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 9 } nvApacsstatRxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 10 } nvApacsstatCallrcv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 11 } nvApacsstatFailneg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 12 } nvApacsstatNoadrblk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 13 } nvApacsstatInvadrblk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 14 } nvApacsstatNonuamtch OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 15 } nvApacsstatTrmdscsu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 16 } nvApacsstatLoscarsu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 17 } nvApacsstatGdadrblks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 18 } nvApacsstatX25clrcip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 19 } nvApacsstatActtmocip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 20 } nvApacsstatTrmdsccip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 21 } nvApacsstatLoscarcip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 22 } nvApacsstatLrcerrcip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 23 } nvApacsstatTmoerrcip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 24 } nvApacsstatX25conns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 25 } nvApacsstatX25clrdat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 26 } nvApacsstatActtmodat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 27 } nvApacsstatTrmdscdat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 28 } nvApacsstatLoscardat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 29 } nvApacsstatDscnoack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 30 } nvApacsstatDscexcnak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 31 } nvApacsstatLrcerrdat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 32 } nvApacsstatBdhostblk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 33 } nvApacsstatTrmnodat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 34 } nvApacsstatHostnodat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 35 } nvApacsstatTrmnoack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 36 } nvApacsstatRetrntmo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 37 } nvApacsstatRetrnnak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 38 } nvApacsstatTxenqs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 39 } nvApacsstatDleeotsnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 40 } nvApacsstatDleeotrcv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 41 } nvApacsstatUnxhstclr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 42 } nvApacsstatNwadrblks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 43 } nvApacsstatRjadrblks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 44 } nvApacsstatNonuaentr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 45 } nvApacsstatMaxsimul OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 46 } nvApacsstatN300bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 47 } nvApacsstatN1200bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 48 } nvApacsstatN2400bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 49 } nvApacsstatN9600bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 50 } nvApacsstatN14400bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 51 } nvApacsstatN28800bd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 52 } nvApacsstatSimultime OBJECT-TYPE --AF SYNTAX DisplayString (SIZE (0..20)) --AF ACCESS read-only --AF STATUS mandatory --AF DESCRIPTION --AF "When maxsimul reached." --AF ::= { nvApacsstatEntry 53 } --AF nvApacsstatParerrsu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 54 } nvApacsstatParerrcip OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 55 } nvApacsstatParerrdat OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvApacsstatEntry 56 } nvApacsstatDtreset OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Date & Time statistics last reset." ::= { nvApacsstatEntry 57 } -- -- billconf -- nvBillconf OBJECT IDENTIFIER ::= { nevadaApacs 6 } nvBillconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvBillconf 1} nvBillconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvBillconf 2} nvBillconf1Table OBJECT-TYPE SYNTAX SEQUENCE OF NvBillconf1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billconf file." ::= { nvBillconf 3 } nvBillconf1Entry OBJECT-TYPE SYNTAX NvBillconf1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billconf record." INDEX { nvBillconf1Index } ::= { nvBillconf1Table 1 } NvBillconf1Entry ::= SEQUENCE { nvBillconf1Index INTEGER, nvBillconfEnable INTEGER, nvBillconfSegsize INTEGER, nvBillconfSet1 INTEGER, nvBillconfSet1nua1 DisplayString, nvBillconfSet1nua2 DisplayString, nvBillconfSet1nua3 DisplayString, nvBillconfSet2 INTEGER, nvBillconfSet2nua1 DisplayString, nvBillconfSet2nua2 DisplayString, nvBillconfSet2nua3 DisplayString, nvBillconfSet3 INTEGER, nvBillconfSet3nua1 DisplayString, nvBillconfSet3nua2 DisplayString, nvBillconfSet3nua3 DisplayString, nvBillconfSet4 INTEGER, nvBillconfSet4nua1 DisplayString, nvBillconfSet4nua2 DisplayString, nvBillconfSet4nua3 DisplayString, nvBillconfSet5 INTEGER, nvBillconfSet5nua1 DisplayString, nvBillconfSet5nua2 DisplayString, nvBillconfSet5nua3 DisplayString, nvBillconfSet6 INTEGER, nvBillconfSet6nua1 DisplayString, nvBillconfSet6nua2 DisplayString, nvBillconfSet6nua3 DisplayString } nvBillconf1Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Billconf record" ::= { nvBillconf1Entry 1 } nvBillconfEnable OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable billstat accounting." ::= { nvBillconf1Entry 2 } nvBillconfSegsize OBJECT-TYPE SYNTAX INTEGER (1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Segment size." ::= { nvBillconf1Entry 3 } nvBillconfSet1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 4 } nvBillconfSet1nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 5 } nvBillconfSet1nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 6 } nvBillconfSet1nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 7 } nvBillconfSet2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 8 } nvBillconfSet2nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 9 } nvBillconfSet2nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 10 } nvBillconfSet2nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 11 } nvBillconfSet3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 12 } nvBillconfSet3nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 13 } nvBillconfSet3nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 14 } nvBillconfSet3nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 15 } nvBillconfSet4 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 16 } nvBillconfSet4nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 17 } nvBillconfSet4nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 18 } nvBillconfSet4nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 19 } nvBillconfSet5 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 20 } nvBillconfSet5nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 21 } nvBillconfSet5nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 22 } nvBillconfSet5nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 23 } nvBillconfSet6 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 24 } nvBillconfSet6nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 25 } nvBillconfSet6nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 26 } nvBillconfSet6nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf1Entry 27 } nvBillconf2Table OBJECT-TYPE SYNTAX SEQUENCE OF NvBillconf2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billconf file." ::= { nvBillconf 4 } nvBillconf2Entry OBJECT-TYPE SYNTAX NvBillconf2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billconf record." INDEX { nvBillconf2Index } ::= { nvBillconf2Table 1 } NvBillconf2Entry ::= SEQUENCE { nvBillconf2Index INTEGER, nvBillconfSet7 INTEGER, nvBillconfSet7nua1 DisplayString, nvBillconfSet7nua2 DisplayString, nvBillconfSet7nua3 DisplayString, nvBillconfSet8 INTEGER, nvBillconfSet8nua1 DisplayString, nvBillconfSet8nua2 DisplayString, nvBillconfSet8nua3 DisplayString, nvBillconfSet9 INTEGER, nvBillconfSet9nua1 DisplayString, nvBillconfSet9nua2 DisplayString, nvBillconfSet9nua3 DisplayString, nvBillconfSet10 INTEGER, nvBillconfSet10nua1 DisplayString, nvBillconfSet10nua2 DisplayString, nvBillconfSet10nua3 DisplayString, nvBillconfSet11 INTEGER, nvBillconfSet11nua1 DisplayString, nvBillconfSet11nua2 DisplayString, nvBillconfSet11nua3 DisplayString, nvBillconfSet12 INTEGER, nvBillconfSet12nua1 DisplayString, nvBillconfSet12nua2 DisplayString, nvBillconfSet12nua3 DisplayString } nvBillconf2Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Billconf record" ::= { nvBillconf2Entry 1 } nvBillconfSet7 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 2 } nvBillconfSet7nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 3 } nvBillconfSet7nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 4 } nvBillconfSet7nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 5 } nvBillconfSet8 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 6 } nvBillconfSet8nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 7 } nvBillconfSet8nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 8 } nvBillconfSet8nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 9 } nvBillconfSet9 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 10 } nvBillconfSet9nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 11 } nvBillconfSet9nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 12 } nvBillconfSet9nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 13 } nvBillconfSet10 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 14 } nvBillconfSet10nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 15 } nvBillconfSet10nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 16 } nvBillconfSet10nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 17 } nvBillconfSet11 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 18 } nvBillconfSet11nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 19 } nvBillconfSet11nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 20 } nvBillconfSet11nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 21 } nvBillconfSet12 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 22 } nvBillconfSet12nua1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 23 } nvBillconfSet12nua2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 24 } nvBillconfSet12nua3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nvBillconf2Entry 25 } -- -- -- billstat -- nvBillstat OBJECT IDENTIFIER ::= { nevadaApacs 7 } nvBillstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvBillstat 1} nvBillstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvBillstat 2} nvBillstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvBillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billstat file." ::= { nvBillstat 3 } nvBillstatEntry OBJECT-TYPE SYNTAX NvBillstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Billstat record." INDEX { nvBillstatIndex } ::= { nvBillstatTable 1 } NvBillstatEntry ::= SEQUENCE { nvBillstatIndex INTEGER, nvBillstatNodeid INTEGER, nvBillstatDate DisplayString, nvBillstatTime DisplayString, nvBillstatNuaset INTEGER, nvBillstatN300bps INTEGER, nvBillstatN1200bps INTEGER, nvBillstatN2400bps INTEGER, nvBillstatNgrtr2400 INTEGER, nvBillstatTxseg INTEGER, nvBillstatRxseg INTEGER, nvBillstatRxcallc INTEGER, nvBillstatHostclr INTEGER, nvBillstatNetclr INTEGER, nvBillstatTxpak INTEGER, nvBillstatRxpak INTEGER, nvBillstatLess5 INTEGER, nvBillstat5to10 INTEGER, nvBillstat10to15 INTEGER, nvBillstat15to20 INTEGER, nvBillstatGrtr20 INTEGER, nvBillstatClosed INTEGER } nvBillstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index " ::= { nvBillstatEntry 1 } nvBillstatNodeid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 2 } nvBillstatDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 3 } nvBillstatTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 4 } nvBillstatNuaset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 5 } nvBillstatN300bps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 7 } nvBillstatN1200bps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 8 } nvBillstatN2400bps OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 9 } nvBillstatNgrtr2400 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 10 } nvBillstatTxseg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 11 } nvBillstatRxseg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 12 } nvBillstatRxcallc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 13 } nvBillstatHostclr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 14 } nvBillstatNetclr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 15 } nvBillstatTxpak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 16 } nvBillstatRxpak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 17 } nvBillstatLess5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 18 } nvBillstat5to10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 19 } nvBillstat10to15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 20 } nvBillstat15to20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 21 } nvBillstatGrtr20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nvBillstatEntry 22 } nvBillstatClosed OBJECT-TYPE SYNTAX INTEGER { open(1), closed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Record closed or open." ::= { nvBillstatEntry 23 } -- -- apfilter -- nvApfilter OBJECT IDENTIFIER ::= { nevadaApacs 8 } nvApfilterMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApfilter 1} nvApfilterNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApfilter 2} nvApfilterTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApfilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apfilter file." ::= { nvApfilter 3 } nvApfilterEntry OBJECT-TYPE SYNTAX NvApfilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apfilter record." INDEX { nvApfilterIndex } ::= { nvApfilterTable 1 } NvApfilterEntry ::= SEQUENCE { nvApfilterIndex INTEGER, nvApfilterCalled DisplayString, nvApfilterCalling DisplayString, nvApfilterAblock DisplayString, nvApfilterLabel1 DisplayString, nvApfilterMerchid DisplayString, nvApfilterTermid DisplayString, nvApfilterFailcause INTEGER, nvApfilterThreshold INTEGER, nvApfilterStatus INTEGER } nvApfilterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Apfilter record" ::= { nvApfilterEntry 1 } nvApfilterCalled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-write STATUS mandatory DESCRIPTION "Called Telephone Number." ::= { nvApfilterEntry 2 } nvApfilterCalling OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-write STATUS mandatory DESCRIPTION "Calling Telephone Number." ::= { nvApfilterEntry 3 } nvApfilterAblock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "A Block." ::= { nvApfilterEntry 4 } nvApfilterLabel1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "ANUACONF Label 1." ::= { nvApfilterEntry 5 } nvApfilterMerchid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Merchant ID." ::= { nvApfilterEntry 6 } nvApfilterTermid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Terminal ID." ::= { nvApfilterEntry 7 } nvApfilterFailcause OBJECT-TYPE SYNTAX INTEGER { any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25) } ACCESS read-write STATUS mandatory DESCRIPTION "Failure Cause." ::= { nvApfilterEntry 8 } nvApfilterThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Number of records per minute for this filter." ::= { nvApfilterEntry 9} nvApfilterStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvApfilterEntry 15 } -- -- apfclstat -- nvApfclstat OBJECT IDENTIFIER ::= { nevadaApacs 9 } nvApfclstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApfclstat 1} nvApfclstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApfclstat 2} nvApfclstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApfclstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apfclstat file." ::= { nvApfclstat 3 } nvApfclstatEntry OBJECT-TYPE SYNTAX NvApfclstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apfclstat record." INDEX { nvApfclstatIndex } ::= { nvApfclstatTable 1 } NvApfclstatEntry ::= SEQUENCE { nvApfclstatIndex INTEGER, nvApfclstatDate DisplayString, nvApfclstatTime DisplayString, nvApfclstatCalling DisplayString, nvApfclstatCalled DisplayString, nvApfclstatAblock DisplayString, nvApfclstatNua DisplayString, nvApfclstatLabel1 DisplayString, nvApfclstatMerchid DisplayString, nvApfclstatTermid DisplayString, nvApfclstatSpeed INTEGER, nvApfclstatTxbytes INTEGER, nvApfclstatRxbytes INTEGER, nvApfclstatIsdnclr INTEGER, nvApfclstatX25clr INTEGER, nvApfclstatDialind INTEGER, nvApfclstatTermtype DisplayString, nvApfclstatPstndur INTEGER, nvApfclstatX25dur INTEGER, nvApfclstatDspname DisplayString, nvApfclstatPriname INTEGER, nvApfclstatWanport DisplayString, nvApfclstatFailcause INTEGER, nvApfclstatFilter INTEGER } nvApfclstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Apfclstat record" ::= { nvApfclstatEntry 1 } nvApfclstatDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Date of Call Failure." ::= { nvApfclstatEntry 2} nvApfclstatTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Time of Call Failure." ::= { nvApfclstatEntry 3} nvApfclstatCalling OBJECT-TYPE SYNTAX DisplayString (SIZE(0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling telephone number." ::= { nvApfclstatEntry 4} nvApfclstatCalled OBJECT-TYPE SYNTAX DisplayString (SIZE(0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "Called telephone number." ::= { nvApfclstatEntry 5} nvApfclstatAblock OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A-block received from terminal." ::= { nvApfclstatEntry 6} nvApfclstatNua OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "NUA to which call was connected." ::= { nvApfclstatEntry 7} nvApfclstatLabel1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "ANUACONF label1 used." ::= { nvApfclstatEntry 8} nvApfclstatMerchid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "Merchant ID from transaction." ::= { nvApfclstatEntry 9} nvApfclstatTermid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Terminal ID from transaction." ::= { nvApfclstatEntry 10} nvApfclstatSpeed OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Speed of modem." ::= { nvApfclstatEntry 11 } nvApfclstatTxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes sent." ::= { nvApfclstatEntry 12 } nvApfclstatRxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes received." ::= { nvApfclstatEntry 13 } nvApfclstatIsdnclr OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "ISDN Clear codes." ::= { nvApfclstatEntry 14 } nvApfclstatX25clr OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "X25 Clear codes." ::= { nvApfclstatEntry 15 } nvApfclstatDialind OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dial indicator from the transaction data." ::= { nvApfclstatEntry 16 } nvApfclstatTermtype OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type from the transaction data." ::= { nvApfclstatEntry 17 } nvApfclstatPstndur OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "PSTN duration." ::= { nvApfclstatEntry 18} nvApfclstatX25dur OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "X25 duration." ::= { nvApfclstatEntry 19} nvApfclstatDspname OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "DSP Port Number." ::= { nvApfclstatEntry 20 } nvApfclstatPriname OBJECT-TYPE SYNTAX INTEGER { none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI link number." ::= { nvApfclstatEntry 21} nvApfclstatWanport OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "X25 Port Number." ::= { nvApfclstatEntry 22 } nvApfclstatFailcause OBJECT-TYPE SYNTAX INTEGER { any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25) } ACCESS read-only STATUS mandatory DESCRIPTION "Failure Cause." ::= { nvApfclstatEntry 23} nvApfclstatFilter OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Filter number - not used in this file." ::= { nvApfclstatEntry 24} -- -- apclstat -- nvApclstat OBJECT IDENTIFIER ::= { nevadaApacs 10 } nvApclstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvApclstat 1} nvApclstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvApclstat 2} nvApclstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvApclstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apclstat file." ::= { nvApclstat 3 } nvApclstatEntry OBJECT-TYPE SYNTAX NvApclstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Apclstat record." INDEX { nvApclstatIndex } ::= { nvApclstatTable 1 } NvApclstatEntry ::= SEQUENCE { nvApclstatIndex INTEGER, nvApclstatDate DisplayString, nvApclstatTime DisplayString, nvApclstatCalling DisplayString, nvApclstatCalled DisplayString, nvApclstatAblock DisplayString, nvApclstatNua DisplayString, nvApclstatLabel1 DisplayString, nvApclstatMerchid DisplayString, nvApclstatTermid DisplayString, nvApclstatSpeed INTEGER, nvApclstatTxbytes INTEGER, nvApclstatRxbytes INTEGER, nvApclstatIsdnclr INTEGER, nvApclstatX25clr INTEGER, nvApclstatDialind INTEGER, nvApclstatTermtype DisplayString, nvApclstatPstndur INTEGER, nvApclstatX25dur INTEGER, nvApclstatDspname DisplayString, nvApclstatPriname INTEGER, nvApclstatWanport DisplayString, nvApclstatFailcause INTEGER, nvApclstatFilter INTEGER } nvApclstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Apclstat record" ::= { nvApclstatEntry 1 } nvApclstatDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Date of Call Failure." ::= { nvApclstatEntry 2} nvApclstatTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Time of Call Failure." ::= { nvApclstatEntry 3} nvApclstatCalling OBJECT-TYPE SYNTAX DisplayString (SIZE(0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "Calling telephone number." ::= { nvApclstatEntry 4} nvApclstatCalled OBJECT-TYPE SYNTAX DisplayString (SIZE(0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "Called telephone number." ::= { nvApclstatEntry 5} nvApclstatAblock OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A-block received from terminal." ::= { nvApclstatEntry 6} nvApclstatNua OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "NUA to which call was connected." ::= { nvApclstatEntry 7} nvApclstatLabel1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "ANUACONF label1 used." ::= { nvApclstatEntry 8} nvApclstatMerchid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "Merchant ID from transaction." ::= { nvApclstatEntry 9} nvApclstatTermid OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Terminal ID from transaction." ::= { nvApclstatEntry 10} nvApclstatSpeed OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Speed of modem." ::= { nvApclstatEntry 11 } nvApclstatTxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes sent." ::= { nvApclstatEntry 12 } nvApclstatRxbytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes received." ::= { nvApclstatEntry 13 } nvApclstatIsdnclr OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "ISDN Clear codes." ::= { nvApclstatEntry 14 } nvApclstatX25clr OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "X25 Clear codes." ::= { nvApclstatEntry 15 } nvApclstatDialind OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dial indicator from the transaction data." ::= { nvApclstatEntry 16 } nvApclstatTermtype OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type from the transaction data." ::= { nvApclstatEntry 17 } nvApclstatPstndur OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "PSTN duration." ::= { nvApclstatEntry 18} nvApclstatX25dur OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "X25 duration." ::= { nvApclstatEntry 19} nvApclstatDspname OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "DSP Port Number." ::= { nvApclstatEntry 20 } nvApclstatPriname OBJECT-TYPE SYNTAX INTEGER { none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9) } ACCESS read-only STATUS mandatory DESCRIPTION "PRI link number." ::= { nvApclstatEntry 21} nvApclstatWanport OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "X25 Port Number." ::= { nvApclstatEntry 22 } nvApclstatFailcause OBJECT-TYPE SYNTAX INTEGER { any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25) } ACCESS read-only STATUS mandatory DESCRIPTION "Failure Cause." ::= { nvApclstatEntry 23} nvApclstatFilter OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Filter number used to produce this record." ::= { nvApclstatEntry 24} -- -- -- R2 Signaling -- -- -- -- r2prof -- nvR2prof OBJECT IDENTIFIER ::= { nevadaR2 1 } nvR2profMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2prof 1} nvR2profNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2prof 2} nvR2profTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2profEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2prof file." ::= { nvR2prof 3 } nvR2profEntry OBJECT-TYPE SYNTAX NvR2profEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2prof record." INDEX { nvR2profIndex } ::= { nvR2profTable 1 } NvR2profEntry ::= SEQUENCE { nvR2profIndex INTEGER, nvR2profProfname DisplayString, nvR2profSuffix DisplayString, nvR2profcdBits -- RN 04/28/98 INTEGER, nvR2profClearback INTEGER, nvR2profForcerel INTEGER, nvR2profClearack INTEGER, nvR2profReanswer INTEGER, nvR2profMfmode INTEGER, nvR2profMfnextdig INTEGER, nvR2profMfrestart INTEGER, nvR2profMfcongstion INTEGER, nvR2profMfvacant INTEGER, nvR2profMfspeech INTEGER, nvR2profMfbusy INTEGER, nvR2profMfspchnc INTEGER, nvR2profMfgroupb INTEGER, nvR2profMfanumsch INTEGER, nvR2profMftimeout INTEGER, nvR2profStatus INTEGER, nvR2profAnswergrd INTEGER, nvR2profClrfwdgrd INTEGER, nvR2profMfabnrel INTEGER, nvR2profIdlealmsk INTEGER, nvR2profSeizalmsk INTEGER, nvR2profSzakalmsk INTEGER, nvR2profAnswalmsk INTEGER, nvR2profClbkalmsk INTEGER, nvR2profFcrlalmsk INTEGER, nvR2profClfwalmsk INTEGER, nvR2profBlckalmsk INTEGER } nvR2profIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2prof record" ::= { nvR2profEntry 1 } nvR2profProfname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of R2 flavor (profname)" ::= { nvR2profEntry 2 } nvR2profSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "Abbreviation of R2 flavor (suffix) " ::= { nvR2profEntry 3 } nvR2profcdBits OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION " Support for CD bits (cdbits) Default value 2 " ::= { nvR2profEntry 4 } nvR2profClearback OBJECT-TYPE SYNTAX INTEGER { sup(6), -- all values (+1) notsup(7) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " Support for CLEAR_BACK (clearback) " ::= { nvR2profEntry 5 } nvR2profForcerel OBJECT-TYPE SYNTAX INTEGER { sup(6), -- all values (+1) notsup(7) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " Support for Forced Release (forcerel) " ::= { nvR2profEntry 6 } nvR2profClearack OBJECT-TYPE SYNTAX INTEGER { sup(6), -- all values (+1) notsup(7) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " Support for CLEAR_ACK (clearack) " ::= { nvR2profEntry 7 } nvR2profReanswer OBJECT-TYPE SYNTAX INTEGER { sup(6), -- all values (+1) notsup(7) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " Support for Reanswer (reanswer) " ::= { nvR2profEntry 8 } nvR2profMfmode OBJECT-TYPE SYNTAX INTEGER { compelled(24), -- all values (+1) semicompel(25), -- all values (+1) noncompel(26) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF scheme for in-band signaling (mfmode) " ::= { nvR2profEntry 9 } nvR2profMfnextdig OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for send next digit (mfnextdig) " ::= { nvR2profEntry 10 } nvR2profMfrestart OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for restart (mfrestart) " ::= { nvR2profEntry 11} nvR2profMfcongstion OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for eqpt congestion (mfcongestion) " ::= { nvR2profEntry 12 } nvR2profMfvacant OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for vacant number (mfvacant) " ::= { nvR2profEntry 13 } nvR2profMfspeech OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for set up speech charge (mfspeech) " ::= { nvR2profEntry 14 } nvR2profMfbusy OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for line busy (mfbusy) " ::= { nvR2profEntry 15 } nvR2profMfspchnc OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for free no charge (mfspchnc) " ::= { nvR2profEntry 16 } nvR2profMfgroupb OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " MF code for change to group B (mfgroupb) " ::= { nvR2profEntry 17 } nvR2profMfanumsch OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION " Trans prot type for calling number (mfanumsch) " ::= { nvR2profEntry 18 } nvR2profMftimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Timeout for MF signaling (mftimeout) " ::= { nvR2profEntry 19 } nvR2profStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvR2profEntry 20 } nvR2profAnswergrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minimal duration of answer signal in ms." ::= { nvR2profEntry 21 } nvR2profClrfwdgrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Minimal duration of clr fwd signal in ms." ::= { nvR2profEntry 22 } nvR2profMfabnrel OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) a1 (32), -- all values (+1) a2 (33), -- all values (+1) a3 (34), -- all values (+1) a4 (35), -- all values (+1) a5 (36), -- all values (+1) a6 (37), -- all values (+1) a7 (38), -- all values (+1) a8 (39), -- all values (+1) a9 (40), -- all values (+1) a10 (41), -- all values (+1) a11 (42), -- all values (+1) a12 (43), -- all values (+1) a13 (44), -- all values (+1) a14 (45), -- all values (+1) a15 (46), -- all values (+1) b1 (47), -- all values (+1) b2 (48), -- all values (+1) b3 (49), -- all values (+1) b4 (50), -- all values (+1) b5 (51), -- all values (+1) b6 (52), -- all values (+1) b7 (53), -- all values (+1) b8 (54), -- all values (+1) b9 (55), -- all values (+1) b10 (56), -- all values (+1) b11 (57), -- all values (+1) b12 (58), -- all values (+1) b13 (59), -- all values (+1) b14 (60), -- all values (+1) b15 (61) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "MF code for abnormal release of inband." ::= { nvR2profEntry 23 } nvR2profIdlealmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in IDLE state?" ::= { nvR2profEntry 24 } nvR2profSeizalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in SEIZED state?" ::= { nvR2profEntry 25 } nvR2profSzakalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in SEIZE ACK state?" ::= { nvR2profEntry 26 } nvR2profAnswalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in ANSWERED state?" ::= { nvR2profEntry 27 } nvR2profClbkalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in ANSWERED state?" ::= { nvR2profEntry 28 } nvR2profFcrlalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in FORCE RELEASE state?" ::= { nvR2profEntry 29 } nvR2profClfwalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in CLEAR FWD state?" ::= { nvR2profEntry 30 } nvR2profBlckalmsk OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Mask alarms in BLOCKED state?" ::= { nvR2profEntry 31 } -- -- -- r2syspar -- nvR2syspar OBJECT IDENTIFIER ::= { nevadaR2 2 } nvR2sysparMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2syspar 1} nvR2sysparNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2syspar 2} nvR2sysparTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2sysparEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2syspar file." ::= { nvR2syspar 3 } nvR2sysparEntry OBJECT-TYPE SYNTAX NvR2sysparEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2syspar record." INDEX { nvR2sysparIndex } ::= { nvR2sysparTable 1 } NvR2sysparEntry ::= SEQUENCE { nvR2sysparIndex INTEGER, nvR2sysparProfname DisplayString, nvR2sysparMaxperdsp INTEGER, nvR2sysparAllocthrs INTEGER, nvR2sysparDeallthrs INTEGER, nvR2sysparStatint INTEGER, nvR2sysparAlarmint INTEGER, nvR2sysparLineway INTEGER, nvR2sysparMaxbnmlen INTEGER, nvR2sysparMinbnmlen INTEGER, nvR2sysparGetcalling INTEGER } nvR2sysparIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2syspar record" ::= { nvR2sysparEntry 1 } nvR2sysparProfname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of R2 flavor (profname)" ::= { nvR2sysparEntry 2 } nvR2sysparMaxperdsp OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Signaling channels allowed per R2DSP (maxperdsp)" ::= { nvR2sysparEntry 3 } nvR2sysparAllocthrs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " Allocation threshold for R2DSPs (allocthrs) " ::= { nvR2sysparEntry 4 } nvR2sysparDeallthrs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Deallocation threshold for R2DSPs (deallthrs)" ::= { nvR2sysparEntry 5 } nvR2sysparStatint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Health status message interval for R2DSPs (statint) " ::= { nvR2sysparEntry 6 } nvR2sysparAlarmint OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Debounce for line status changes (alarmint)" ::= { nvR2sysparEntry 7 } nvR2sysparLineway OBJECT-TYPE SYNTAX INTEGER { inonly(104), -- all values (+1) inout(105) } ACCESS read-write STATUS mandatory DESCRIPTION "Direction of allowed R2 calls (lineway) " ::= { nvR2sysparEntry 8 } nvR2sysparMaxbnmlen OBJECT-TYPE SYNTAX INTEGER (0..24) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum length of called number for incoming calls (maxbnmlen) default is zero " ::= { nvR2sysparEntry 9 } nvR2sysparMinbnmlen OBJECT-TYPE SYNTAX INTEGER (0..24) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum length of called number for incoming calls (minbnmlen) Default value is zero " ::= { nvR2sysparEntry 10 } nvR2sysparGetcalling OBJECT-TYPE SYNTAX INTEGER { yes(2), no(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether or not calling number is needed (getcallng) default is yes " ::= { nvR2sysparEntry 11 } -- -- r2conf -- nvR2conf OBJECT IDENTIFIER ::= { nevadaR2 3 } nvR2confMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2conf 1} nvR2confNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2conf 2} nvR2confTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2confEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2conf file." ::= { nvR2conf 3 } nvR2confEntry OBJECT-TYPE SYNTAX NvR2confEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2conf record." INDEX { nvR2confIndex } ::= { nvR2confTable 1 } NvR2confEntry ::= SEQUENCE { nvR2confIndex INTEGER, nvR2confDliname DisplayString, nvR2confStatus INTEGER } nvR2confIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2conf record" ::= { nvR2confEntry 1 } nvR2confDliname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of DLI port (dliname)" ::= { nvR2confEntry 3 } nvR2confStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvR2confEntry 4 } -- -- -- -- r2pstat -- -- nvR2pstat OBJECT IDENTIFIER ::= { nevadaR2 4 } nvR2pstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2pstat 1} nvR2pstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2pstat 2} nvR2pstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2pstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2pstat file." ::= { nvR2pstat 3 } nvR2pstatEntry OBJECT-TYPE SYNTAX NvR2pstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2pstat record." INDEX { nvR2pstatIndex } ::= { nvR2pstatTable 1 } NvR2pstatEntry ::= SEQUENCE { nvR2pstatIndex INTEGER, nvR2pstatDliname DisplayString, nvR2pstatPstat INTEGER, nvR2pstatTsstat DisplayString, nvR2pstatObr2dsp INTEGER, nvR2pstatObstat INTEGER, nvR2pstatLstatinfo INTEGER, nvR2pstatLinbadcnt Counter, nvR2pstatTsbadcnt Counter, nvR2pstatTotisigatt Counter, nvR2pstatToticalatt Counter, nvR2pstatToticalest Counter, nvR2pstatTotosigatt Counter, nvR2pstatTotocalatt Counter, nvR2pstatTotocalest Counter, nvR2pstatDtreset DisplayString, nvR2pstatFlavor DisplayString } nvR2pstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2pstat record" ::= { nvR2pstatEntry 1 } nvR2pstatDliname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of DLI port (dliname)" ::= { nvR2pstatEntry 2 } nvR2pstatPstat OBJECT-TYPE SYNTAX INTEGER { unknown(2), -- all values (+1) up(3), -- all values (+1) disabled(4), -- all values (+1) down(5) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of R2 port" ::= { nvR2pstatEntry 3 } nvR2pstatTsstat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "Status of R2 port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down." ::= { nvR2pstatEntry 4 } nvR2pstatObr2dsp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "R2DSP which has this ports ob sig channel" ::= { nvR2pstatEntry 5 } nvR2pstatObstat OBJECT-TYPE SYNTAX INTEGER { nocircuit(1), -- all values (+1) obcircsetup(2), -- all values (+1) obsigsetup(3), -- all values (+1) obsigup(4), -- all values (+1) obbad(5), -- all values (+1) dspbad(6), -- all values (+1) swerr(7) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "status of the ob sig channel for this port" ::= { nvR2pstatEntry 6 } nvR2pstatLstatinfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Information accompanying a LINE_STATUS message" ::= { nvR2pstatEntry 7 } nvR2pstatLinbadcnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " No. of line_status line_bad msg received" ::= { nvR2pstatEntry 8 } nvR2pstatTsbadcnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of line_status line_bad msg received " ::= { nvR2pstatEntry 9 } nvR2pstatTotisigatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming in-band channels created" ::= { nvR2pstatEntry 10 } nvR2pstatToticalatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming R2 calls attempted" ::= { nvR2pstatEntry 11 } nvR2pstatToticalest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming R2 calls established" ::= { nvR2pstatEntry 12 } nvR2pstatTotosigatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing in-band channels created" ::= { nvR2pstatEntry 13 } nvR2pstatTotocalatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing R2 calls attempted" ::= { nvR2pstatEntry 14 } nvR2pstatTotocalest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing R2 calls established" ::= { nvR2pstatEntry 15 } nvR2pstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvR2pstatEntry 16 } nvR2pstatFlavor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Abbreviation of R2 flavor." ::= { nvR2pstatEntry 17 } -- -- r2dspstat -- -- nvR2dspstat OBJECT IDENTIFIER ::= { nevadaR2 5 } nvR2dspstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2dspstat 1} nvR2dspstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2dspstat 2} nvR2dspstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2dspstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2dspstat file." ::= { nvR2dspstat 3 } nvR2dspstatEntry OBJECT-TYPE SYNTAX NvR2dspstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2dspstat record." INDEX { nvR2dspstatIndex } ::= { nvR2dspstatTable 1 } NvR2dspstatEntry ::= SEQUENCE { nvR2dspstatIndex INTEGER, nvR2dspstatDevname DisplayString, nvR2dspstatStat INTEGER, nvR2dspstatNumobchn Counter, nvR2dspstatNumibchn Counter, nvR2dspstatUnusedchn Counter, nvR2dspstatTotobchn Counter, nvR2dspstatTotibchn Counter, nvR2dspstatDtreset DisplayString, nvR2dspstatFlavor DisplayString } nvR2dspstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2dspstat record" ::= { nvR2dspstatEntry 1 } nvR2dspstatDevname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of DSP device used for this R2DSP" ::= { nvR2dspstatEntry 2 } nvR2dspstatStat OBJECT-TYPE SYNTAX INTEGER { r2dspinit(1), -- all values (+1) r2dspconfig(2), -- all values (+1) r2dspup(3), -- all values (+1) r2dspdown(4), -- all values (+1) r2dspfail(5), -- all values (+1) tsmalfunc(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Health status of R2DSP" ::= { nvR2dspstatEntry 3 } nvR2dspstatNumobchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of ob sig channels assigned to this R2DSP" ::= { nvR2dspstatEntry 4 } nvR2dspstatNumibchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of ib channels assigned to this R2DSP" ::= { nvR2dspstatEntry 5 } nvR2dspstatUnusedchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of avaialble timeslots on this R2DSP" ::= { nvR2dspstatEntry 6 } nvR2dspstatTotobchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative total of ob channels assigned to this R2DSP" ::= { nvR2dspstatEntry 7 } nvR2dspstatTotibchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative total of ib channels assigned to this R2DSP" ::= { nvR2dspstatEntry 8 } nvR2dspstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvR2dspstatEntry 9 } nvR2dspstatFlavor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Abbreviation of the R2 Flavor." ::= { nvR2dspstatEntry 10 } -- -- r2cstat -- -- nvR2cstat OBJECT IDENTIFIER ::= { nevadaR2 6 } nvR2cstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvR2cstat 1} nvR2cstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvR2cstat 2} nvR2cstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvR2cstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2cstat file." ::= { nvR2cstat 3 } nvR2cstatEntry OBJECT-TYPE SYNTAX NvR2cstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "R2cstat record." INDEX { nvR2cstatIndex } ::= { nvR2cstatTable 1 } NvR2cstatEntry ::= SEQUENCE { nvR2cstatIndex INTEGER, nvR2cstatR2port INTEGER, nvR2cstatTimeslot INTEGER, nvR2cstatIbr2dsp INTEGER, nvR2cstatCstat INTEGER, nvR2cstatDirection INTEGER, nvR2cstatReason INTEGER, nvR2cstatCallnum INTEGER, nvR2cstatCallednum DisplayString, nvR2cstatCallingnum DisplayString, nvR2cstatLanguage INTEGER, nvR2cstatEchosup INTEGER, nvR2cstatCparty INTEGER } nvR2cstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of R2cstat record" ::= { nvR2cstatEntry 1 } nvR2cstatR2port OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION " R2CONF record number of port carring timeslot of this call" ::= { nvR2cstatEntry 2 } nvR2cstatTimeslot OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Timeslot number" ::= { nvR2cstatEntry 3 } nvR2cstatIbr2dsp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "R2DSPSTAT recnum of R2DSP carrying this circuit" ::= { nvR2cstatEntry 4 } nvR2cstatCstat OBJECT-TYPE SYNTAX INTEGER { ibnocircuit(1), ibcircsetup(2), -- all values (+1) ibcircerr(3), -- all values (+1) ibcirfail(4), ibdspmalf(5), nor2dspts(6), -- all values (+1) ibdecode(7), -- all values (+1) ibcomplete(8), -- all values (+1) ibabnterm(9), -- all values (+1) ibconrej(10), rejected(11), -- all values (+1) datacall(12), -- all values (+1) cleared(13) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION " Current status of this timeslot" ::= { nvR2cstatEntry 5 } nvR2cstatDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), -- all values (+1) outgoing(2) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION " incoming or outgoing call" ::= { nvR2cstatEntry 6 } nvR2cstatReason OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION " For failed calls reason for the failure" ::= { nvR2cstatEntry 7 } nvR2cstatCallnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sequence number of this call" ::= { nvR2cstatEntry 8 } nvR2cstatCallednum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION " Called number" ::= { nvR2cstatEntry 9 } nvR2cstatCallingnum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION " Calling number" ::= { nvR2cstatEntry 10 } nvR2cstatLanguage OBJECT-TYPE SYNTAX INTEGER { nolang(1), -- all values (+1) discrim(2), -- all values (+1) french(3), -- all values (+1) english(4), -- all values (+1) german(5), -- all values (+1) russian(6), -- all values (+1) spanish(7), -- all values (+1) spare1(8), -- all values (+1) spare2(9), -- all values (+1) spare3(10), -- all values (+1) spare4(11) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "Language of call" ::= { nvR2cstatEntry 11 } nvR2cstatEchosup OBJECT-TYPE SYNTAX INTEGER { noechosup(1), -- all values (+1) echosnone(2), -- all values (+1) echoshalf(3), -- all values (+1) echosfull(4) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "Echo suppressor" ::= { nvR2cstatEntry 12 } nvR2cstatCparty OBJECT-TYPE SYNTAX INTEGER { nocparty (1), -- all values (+1) natsubpri (2), -- all values (+1) natsubnopri (3), -- all values (+1) natmaint (4), -- all values (+1) spare (5), -- all values (+1) natmanop (6), -- all values (+1) natdata (7), -- all values (+1) intsubnopri (8), -- all values (+1) intsubpri (9), -- all values (+1) intdata (10), -- all values (+1) intopftc (11) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of calling party" ::= { nvR2cstatEntry 13 } -- -- -- rbsyspar -- nvRbsyspar OBJECT IDENTIFIER ::= { nevadaRb 1 } nvRbsysparMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbsyspar 1} nvRbsysparNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbsyspar 2} nvRbsysparTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbsysparEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbsyspar file." ::= { nvRbsyspar 3 } nvRbsysparEntry OBJECT-TYPE SYNTAX NvRbsysparEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbsyspar record." INDEX { nvRbsysparIndex } ::= { nvRbsysparTable 1 } NvRbsysparEntry ::= SEQUENCE { nvRbsysparIndex INTEGER, nvRbsysparMaxperdsp INTEGER, nvRbsysparAllocthrs INTEGER, nvRbsysparDeallthrs INTEGER, nvRbsysparStatint INTEGER, nvRbsysparAlarmint INTEGER, nvRbsysparMaxbnmlen INTEGER, nvRbsysparMinbnmlen INTEGER, nvRbsysparPollint INTEGER, nvRbsysparStatus INTEGER } nvRbsysparIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbsyspar record" ::= { nvRbsysparEntry 1 } nvRbsysparMaxperdsp OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Signaling channels allowed per RbDSP (maxperdsp)" ::= { nvRbsysparEntry 3 } nvRbsysparAllocthrs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " Allocation threshold for RbDSPs (allocthrs) " ::= { nvRbsysparEntry 4 } nvRbsysparDeallthrs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Deallocation threshold for RbDSPs (deallthrs)" ::= { nvRbsysparEntry 5 } nvRbsysparStatint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Health status message interval for RbDSPs (statint) " ::= { nvRbsysparEntry 6 } nvRbsysparAlarmint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Debounce for line status changes (alarmint)" ::= { nvRbsysparEntry 7 } nvRbsysparMaxbnmlen OBJECT-TYPE SYNTAX INTEGER (0..24) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum length of called number for incoming calls (maxbnmlen) default is zero " ::= { nvRbsysparEntry 9 } nvRbsysparMinbnmlen OBJECT-TYPE SYNTAX INTEGER (0..24) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum length of called number for incoming calls (minbnmlen) Default value is zero " ::= { nvRbsysparEntry 10 } nvRbsysparPollint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Polling interval for RB pipes. default is 25 " ::= { nvRbsysparEntry 11 } nvRbsysparStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRbsysparEntry 12 } -- -- rbconf -- nvRbconf OBJECT IDENTIFIER ::= { nevadaRb 2 } nvRbconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbconf 1} nvRbconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbconf 2} nvRbconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbconf file." ::= { nvRbconf 3 } nvRbconfEntry OBJECT-TYPE SYNTAX NvRbconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbconf record." INDEX { nvRbconfIndex } ::= { nvRbconfTable 1 } NvRbconfEntry ::= SEQUENCE { nvRbconfIndex INTEGER, nvRbconfDliname DisplayString, nvRbconfProfname DisplayString, nvRbconfRtmethod INTEGER, nvRbconfStatus INTEGER } nvRbconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbconf record" ::= { nvRbconfEntry 1 } nvRbconfDliname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of DLI port (dliname)" ::= { nvRbconfEntry 3 } nvRbconfProfname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of Prof" ::= { nvRbconfEntry 4 } nvRbconfRtmethod OBJECT-TYPE SYNTAX INTEGER { ibsig(16), direct(17) } ACCESS read-write STATUS mandatory DESCRIPTION "default 15" ::= { nvRbconfEntry 5 } nvRbconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRbconfEntry 6 } -- -- -- -- rbpstat -- -- nvRbpstat OBJECT IDENTIFIER ::= { nevadaRb 3 } nvRbpstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbpstat 1} nvRbpstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbpstat 2} nvRbpstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbpstat file." ::= { nvRbpstat 3 } nvRbpstatEntry OBJECT-TYPE SYNTAX NvRbpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbpstat record." INDEX { nvRbpstatIndex } ::= { nvRbpstatTable 1 } NvRbpstatEntry ::= SEQUENCE { nvRbpstatIndex INTEGER, nvRbpstatDliname DisplayString, nvRbpstatFlavor DisplayString, nvRbpstatPstat INTEGER, nvRbpstatTsstat DisplayString, nvRbpstatRbsrbdsp INTEGER, nvRbpstatRbstat INTEGER, nvRbpstatLinbadcnt Counter, nvRbpstatTsbadcnt Counter, nvRbpstatTotisigatt Counter, nvRbpstatToticalatt Counter, nvRbpstatToticalest Counter, nvRbpstatTotosigatt Counter, nvRbpstatTotocalatt Counter, nvRbpstatTotocalest Counter, nvRbpstatDtreset DisplayString } nvRbpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbpstat record" ::= { nvRbpstatEntry 1 } nvRbpstatDliname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of (dliname)" ::= { nvRbpstatEntry 2 } nvRbpstatFlavor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Name " ::= { nvRbpstatEntry 3 } nvRbpstatPstat OBJECT-TYPE SYNTAX INTEGER { unknown(2), -- all values (+1) up(3), -- all values (+1) disabled(4), -- all values (+1) down(5) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of Rb port" ::= { nvRbpstatEntry 4 } nvRbpstatTsstat OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "Status of Rb port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down." ::= { nvRbpstatEntry 5 } nvRbpstatRbsrbdsp OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "RbsrbDSP which has this ports ob sig channel" ::= { nvRbpstatEntry 6 } nvRbpstatRbstat OBJECT-TYPE SYNTAX INTEGER { nopipe(1), rbsigsetup(3), rbsigup(4), rbbad(5), dspbad(6), swerr(7) } ACCESS read-only STATUS mandatory DESCRIPTION "status of the ob sig channel for this port" ::= { nvRbpstatEntry 7 } nvRbpstatLstatinfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Information accompanying a LINE_STATUS message" ::= { nvRbpstatEntry 8 } nvRbpstatLinbadcnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " No. of line_status line_bad msg received" ::= { nvRbpstatEntry 9 } nvRbpstatTsbadcnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of line_status line_bad msg received " ::= { nvRbpstatEntry 10 } nvRbpstatTotisigatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming in-band channels created" ::= { nvRbpstatEntry 11 } nvRbpstatToticalatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming Rb calls attempted" ::= { nvRbpstatEntry 12 } nvRbpstatToticalest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of incoming Rb calls established" ::= { nvRbpstatEntry 13 } nvRbpstatTotosigatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing in-band channels created" ::= { nvRbpstatEntry 14 } nvRbpstatTotocalatt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing R2 calls attempted" ::= { nvRbpstatEntry 15 } nvRbpstatTotocalest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No. of outgoing Rb calls established" ::= { nvRbpstatEntry 16 } nvRbpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvRbpstatEntry 17 } -- -- rbdspstat -- -- nvRbdspstat OBJECT IDENTIFIER ::= { nevadaRb 4 } nvRbdspstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbdspstat 1} nvRbdspstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbdspstat 2} nvRbdspstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbdspstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbdspstat file." ::= { nvRbdspstat 3 } nvRbdspstatEntry OBJECT-TYPE SYNTAX NvRbdspstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbdspstat record." INDEX { nvRbdspstatIndex } ::= { nvRbdspstatTable 1 } NvRbdspstatEntry ::= SEQUENCE { nvRbdspstatIndex INTEGER, nvRbdspstatDevname DisplayString, nvRbdspstatFlavor DisplayString, nvRbdspstatStat INTEGER, nvRbdspstatNumrbpipe Counter, nvRbdspstatNumibchn Counter, nvRbdspstatUnusedchn Counter, nvRbdspstatTotrbpipe Counter, nvRbdspstatTotibchn Counter, nvRbdspstatDtreset DisplayString } nvRbdspstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbdspstat record" ::= { nvRbdspstatEntry 1 } nvRbdspstatDevname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of DSP device used for this RbDSP" ::= { nvRbdspstatEntry 2 } nvRbdspstatFlavor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "flavor" ::= { nvRbdspstatEntry 3 } nvRbdspstatStat OBJECT-TYPE SYNTAX INTEGER { rbdspinit(1), -- all values (+1) rbdspconfig(2), -- all values (+1) rbdspup(3), -- all values (+1) rbdspdown(4), -- all values (+1) rbdspfail(5), -- all values (+1) tsmalfunc(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Health status of RbDSP" ::= { nvRbdspstatEntry 4 } nvRbdspstatNumrbpipe OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of rbpipe sig channels assigned to this RbDSP" ::= { nvRbdspstatEntry 5 } nvRbdspstatNumibchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of ib channels assigned to this RbDSP" ::= { nvRbdspstatEntry 6 } nvRbdspstatUnusedchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Num of avaialble timeslots on this RbDSP" ::= { nvRbdspstatEntry 7 } nvRbdspstatTotrbpipe OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative total of rbpipe channels assigned to this RbDSP" ::= { nvRbdspstatEntry 8 } nvRbdspstatTotibchn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Cumulative total of ib channels assigned to this RbDSP" ::= { nvRbdspstatEntry 9 } nvRbdspstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvRbdspstatEntry 10 } -- -- rbcstat -- -- nvRbcstat OBJECT IDENTIFIER ::= { nevadaRb 5 } nvRbcstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbcstat 1} nvRbcstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbcstat 2} nvRbcstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbcstat file." ::= { nvRbcstat 3 } nvRbcstatEntry OBJECT-TYPE SYNTAX NvRbcstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbcstat record." INDEX { nvRbcstatIndex } ::= { nvRbcstatTable 1 } NvRbcstatEntry ::= SEQUENCE { nvRbcstatIndex INTEGER, nvRbcstatRbport INTEGER, nvRbcstatTimeslot INTEGER, nvRbcstatIbrbdsp INTEGER, nvRbcstatCstat INTEGER, nvRbcstatDirection INTEGER, nvRbcstatReason INTEGER, nvRbcstatCallnum INTEGER, nvRbcstatCallednum DisplayString, nvRbcstatCallingnum DisplayString } nvRbcstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbcstat record" ::= { nvRbcstatEntry 1 } nvRbcstatRbport OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "RBCONF record number of port carring timeslot of this call" ::= { nvRbcstatEntry 2 } nvRbcstatTimeslot OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Timeslot number" ::= { nvRbcstatEntry 3 } nvRbcstatIbrbdsp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RBDSPSTAT recnum of RBDSP carrying this circuit" ::= { nvRbcstatEntry 4 } nvRbcstatCstat OBJECT-TYPE SYNTAX INTEGER { ibnocircuit(1), ibcircsetup(2), -- all values (+1) ibcircerr(3), -- all values (+1) ibcircfail(4), ibdspmalf(5), norbdspts(6), -- all values (+1) ibdecode(7), -- all values (+1) ibcomplete(8), -- all values (+1) dirrouting(9), ibabnterm(10), -- all values (+1) ibconrej(11), rejected(12), -- all values (+1) datacall(13), -- all values (+1) cleared(14) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION " Current status of this timeslot" ::= { nvRbcstatEntry 5 } nvRbcstatDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), -- all values (+1) outgoing(2) -- all values (+1) } ACCESS read-only STATUS mandatory DESCRIPTION " incoming or outgoing call" ::= { nvRbcstatEntry 6 } nvRbcstatReason OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION " For failed calls reason for the failure" ::= { nvRbcstatEntry 7 } nvRbcstatCallnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sequence number of this call" ::= { nvRbcstatEntry 8 } nvRbcstatCallednum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION " Called number" ::= { nvRbcstatEntry 9 } nvRbcstatCallingnum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION " Calling number" ::= { nvRbcstatEntry 10 } -- -- -- rbprof -- nvRbprof OBJECT IDENTIFIER ::= { nevadaRb 6 } nvRbprofMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvRbprof 1} nvRbprofNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvRbprof 2} nvRbprofTable OBJECT-TYPE SYNTAX SEQUENCE OF NvRbprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbprof file." ::= { nvRbprof 3 } nvRbprofEntry OBJECT-TYPE SYNTAX NvRbprofEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Rbprof record." INDEX { nvRbprofIndex } ::= { nvRbprofTable 1 } NvRbprofEntry ::= SEQUENCE { nvRbprofIndex INTEGER, nvRbprofProfname DisplayString, nvRbprofSuffix DisplayString, nvRbprofSigtype INTEGER, nvRbprofRlcf INTEGER, nvRbprofLcfo INTEGER, nvRbprofWinklen INTEGER, nvRbprofMfdelay INTEGER, nvRbprofDisconlen INTEGER, nvRbprofIbsigtype INTEGER, nvRbprofDtmftmout INTEGER, nvRbprofDtmfon INTEGER, nvRbprofDtmfoff INTEGER, nvRbprofStatus INTEGER } nvRbprofIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Rbprof record" ::= { nvRbprofEntry 1 } nvRbprofProfname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of RB flavor (profname)" ::= { nvRbprofEntry 2 } nvRbprofSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "Abbreviation of RB flavor (suffix) " ::= { nvRbprofEntry 3 } nvRbprofSigtype OBJECT-TYPE SYNTAX INTEGER { e-and-m(2), -- all values (+1) loop(3), -- all values (+1) ground(4) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " Support for CD bits (cdbits) Default value 2 " ::= { nvRbprofEntry 4 } nvRbprofRlcf OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) yes(2), -- all values (+1) no(3) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvRbprofEntry 5 } nvRbprofLcfo OBJECT-TYPE SYNTAX INTEGER { notapp(1), -- all values (+1) yes(2), -- all values (+1) no(3) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { nvRbprofEntry 6 } nvRbprofWinklen OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Support for CLEAR_ACK (clearack) " ::= { nvRbprofEntry 7 } nvRbprofMfdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Duration in ms between wink and inband (mfdelay)." ::= { nvRbprofEntry 8 } nvRbprofDisconlen OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Duration of EM disconnection." ::= { nvRbprofEntry 9 } nvRbprofIbsigtype OBJECT-TYPE SYNTAX INTEGER { dtmf(2) -- all values (+1) } ACCESS read-write STATUS mandatory DESCRIPTION "Inband signaling protocol to use." ::= { nvRbprofEntry 10 } nvRbprofDtmftmout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DTMF signal timeout." ::= { nvRbprofEntry 11} nvRbprofDtmfon OBJECT-TYPE SYNTAX INTEGER (16..100) ACCESS read-write STATUS mandatory DESCRIPTION "DTMF signal ON time." ::= { nvRbprofEntry 12 } nvRbprofDtmfoff OBJECT-TYPE SYNTAX INTEGER (16..100) ACCESS read-write STATUS mandatory DESCRIPTION "DTMF signal OFF time." ::= { nvRbprofEntry 13 } nvRbprofStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvRbprofEntry 14 } -- -- l2tp -- -- -- L2TPCONF -- nvL2tpconf OBJECT IDENTIFIER ::= { nevadaL2tp 1 } nvL2tpconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvL2tpconf 1} nvL2tpconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvL2tpconf 2} nvL2tpconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvL2tpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "l2tpconf file." ::= { nvL2tpconf 3 } nvL2tpconfEntry OBJECT-TYPE SYNTAX NvL2tpconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "l2tpconf record." INDEX { nvL2tpconfIndex } ::= { nvL2tpconfTable 1 } NvL2tpconfEntry ::= SEQUENCE { nvL2tpconfIndex INTEGER, nvL2tpconfAdminStat INTEGER, nvL2tpconfAckTimout INTEGER, nvL2tpconfInactivty INTEGER, nvL2tpconfRetrans INTEGER, nvL2tpconfIdle INTEGER, nvL2tpconfStatus INTEGER } nvL2tpconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of L2tpconf record." ::= { nvL2tpconfEntry 1 } nvL2tpconfAdminStat OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable l2tp protocol stack." ::= { nvL2tpconfEntry 2 } nvL2tpconfAckTimout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "acknowlege timeout." ::= { nvL2tpconfEntry 3} nvL2tpconfInactivty OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Inactivty interval for hello msg." ::= { nvL2tpconfEntry 4} nvL2tpconfRetrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max retransmit before closing." ::= { nvL2tpconfEntry 5 } nvL2tpconfIdle OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max idle prior to closing tunnel" ::= { nvL2tpconfEntry 6} nvL2tpconfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status. Add the record to the table (valid) or delete the record from the table (invalid)." ::= { nvL2tpconfEntry 7 } -- -- L2tpstat -- nvL2tpstat OBJECT IDENTIFIER ::= { nevadaL2tp 2 } nvL2tpstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvL2tpstat 1} nvL2tpstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvL2tpstat 2} nvL2tpstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvL2tpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "L2tpstat file." ::= { nvL2tpstat 3 } nvL2tpstatEntry OBJECT-TYPE SYNTAX NvL2tpstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "L2tpstat record." INDEX { nvL2tpstatIndex } ::= { nvL2tpstatTable 1 } NvL2tpstatEntry ::= SEQUENCE { nvL2tpstatIndex INTEGER, nvL2tpstatProtVrsn INTEGER, nvL2tpstatActivTnls INTEGER, nvL2tpstatActivSns INTEGER, nvL2tpstatMlfrmPkt INTEGER, nvL2tpstatCtrlRecv INTEGER, nvL2tpstatCtrlOofW INTEGER, nvL2tpstatCtrlOofS INTEGER, nvL2tpstatCtrlSend INTEGER, nvL2tpstatDataRecv INTEGER, nvL2tpstatDataSend INTEGER, nvL2tpstatTnlUnav INTEGER, nvL2tpstatSessUnav INTEGER, nvL2tpstatDtreset DisplayString } nvL2tpstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of L2tpstat record" ::= { nvL2tpstatEntry 1 } nvL2tpstatActivTnls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of currently active tunnel" ::= { nvL2tpstatEntry 2 } nvL2tpstatActivSns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " number of currently active session" ::= { nvL2tpstatEntry 3 } nvL2tpstatMlfrmPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of malformed packets received by l2tp" ::= { nvL2tpstatEntry 4 } nvL2tpstatCtrlRecv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of control packet received" ::= { nvL2tpstatEntry 5 } nvL2tpstatCtrlOofW OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of control packet received outside of window" ::= { nvL2tpstatEntry 6 } nvL2tpstatCtrlOofS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of control packet received out of sequence" ::= { nvL2tpstatEntry 7 } nvL2tpstatCtrlSend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of control packet sent" ::= { nvL2tpstatEntry 8 } nvL2tpstatDataRecv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " number of data packet received" ::= { nvL2tpstatEntry 9 } nvL2tpstatDataSend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " number of data packet sent" ::= { nvL2tpstatEntry 10 } nvL2tpstatTnlUnav OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "tunnels not created due to unavailable resources" ::= { nvL2tpstatEntry 11 } nvL2tpstatSessUnav OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number session not created due to unavailable resources" ::= { nvL2tpstatEntry 12 } nvL2tpstatProtVrsn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "l2tp protocol version number" ::= { nvL2tpstatEntry 13 } nvL2tpstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvL2tpstatEntry 20 } -- -- L2tptstat -- nvL2tptstat OBJECT IDENTIFIER ::= { nevadaL2tp 3 } nvL2tptstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvL2tptstat 1} nvL2tptstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvL2tptstat 2} nvL2tptstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvL2tptstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "L2tptstat file." ::= { nvL2tptstat 3 } nvL2tptstatEntry OBJECT-TYPE SYNTAX NvL2tptstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "L2tptstat record." INDEX { nvL2tptstatIndex } ::= { nvL2tptstatTable 1 } NvL2tptstatEntry ::= SEQUENCE { nvL2tptstatIndex INTEGER, nvL2tptstatLocalTnID INTEGER, nvL2tptstatRemotTnID INTEGER, nvL2tptstatLocalWSiz INTEGER, nvL2tptstatRemotWSiz INTEGER, nvL2tptstatRmtIPaddr DisplayString, nvL2tptstatRmtHstNme DisplayString, nvL2tptstatTunlState INTEGER, nvL2tptstatRecvCtrl INTEGER, nvL2tptstatRecvData INTEGER, nvL2tptstatSendCtrl INTEGER, nvL2tptstatSendData INTEGER, nvL2tptstatDtreset DisplayString } nvL2tptstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of L2tptstat record" ::= { nvL2tptstatEntry 1 } nvL2tptstatLocalTnID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local Tunnel Id of the LAC " ::= { nvL2tptstatEntry 2 } nvL2tptstatRemotTnID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Local call id of the LNS" ::= { nvL2tptstatEntry 3 } nvL2tptstatLocalWSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote Call Id of the LNS" ::= { nvL2tptstatEntry 4 } nvL2tptstatRemotWSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Call Serial Number" ::= { nvL2tptstatEntry 5 } nvL2tptstatRmtIPaddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Local Window Size" ::= { nvL2tptstatEntry 6 } nvL2tptstatRmtHstNme OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "PPP stat file record" ::= { nvL2tptstatEntry 7 } nvL2tptstatTunlState OBJECT-TYPE SYNTAX INTEGER{ null(1), -- null state idle(2), -- idle cnnting(3), -- connecting estb(4), -- established disconn(5) -- disconnected } ACCESS read-only STATUS mandatory DESCRIPTION "Received Data Packets" ::= { nvL2tptstatEntry 8 } nvL2tptstatRecvCtrl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received Control Packets" ::= { nvL2tptstatEntry 9 } nvL2tptstatRecvData OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received Data Packets" ::= { nvL2tptstatEntry 10 } nvL2tptstatSendCtrl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sent Control Packets" ::= { nvL2tptstatEntry 11 } nvL2tptstatSendData OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sent Data Packets" ::= { nvL2tptstatEntry 12 } nvL2tptstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvL2tptstatEntry 20 } -- -- L2tpsstat -- nvL2tpsstat OBJECT IDENTIFIER ::= { nevadaL2tp 4 } nvL2tpsstatMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records allowed in database file." ::= {nvL2tpsstat 1} nvL2tpsstatNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of records in use." ::= {nvL2tpsstat 2} nvL2tpsstatTable OBJECT-TYPE SYNTAX SEQUENCE OF NvL2tpsstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "l2tpsstat file." ::= {nvL2tpsstat 3} nvL2tpsstatEntry OBJECT-TYPE SYNTAX NvL2tpsstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "l2tpsstat record." INDEX {nvL2tpsstatIndex} ::= {nvL2tpsstatTable 1 } NvL2tpsstatEntry ::= SEQUENCE { nvL2tpsstatIndex INTEGER, nvL2tpsstatTunnelID INTEGER, nvL2tpsstatLclCallID INTEGER, nvL2tpsstatRmtCallID INTEGER, nvL2tpsstatCallSN INTEGER, nvL2tpsstatState INTEGER, nvL2tpsstatDeviceNum INTEGER, nvL2tpsstatDataRecv INTEGER, nvL2tpsstatDataSend INTEGER, nvL2tpsstatDtreset DisplayString } nvL2tpsstatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of L2tpsstat record" ::= {nvL2tpsstatEntry 1} nvL2tpsstatTunnelID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local Tunnel Id of the LAC." ::= {nvL2tpsstatEntry 2} nvL2tpsstatLclCallID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local Call Id of the LNS." ::= {nvL2tpsstatEntry 3} nvL2tpsstatRmtCallID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote Call Id of the LNS." ::= {nvL2tpsstatEntry 4} nvL2tpsstatCallSN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Call Serial Number." ::= {nvL2tpsstatEntry 5} nvL2tpsstatState OBJECT-TYPE SYNTAX INTEGER { null(1), idle(2), cnnting(3), estb(4), disconn(5) } ACCESS read-only STATUS mandatory DESCRIPTION "State." ::= {nvL2tpsstatEntry 6} nvL2tpsstatDeviceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Device Number." ::= {nvL2tpsstatEntry 7} nvL2tpsstatDataRecv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Received Data Packets." ::= {nvL2tpsstatEntry 8} nvL2tpsstatDataSend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sent Data Packets." ::= {nvL2tpsstatEntry 9} nvL2tpsstatDtreset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date & time statistics last reset" ::= { nvL2tpsstatEntry 15 } -- -- -- -- -- Nevada Generic Alarm/Trap Objects -- nvTrapS0 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "S0: 0-80 character trap string" ::= {nevadaTraps 1} nvTrapS1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "S1: 0-80 character trap string" ::= {nevadaTraps 2} nvTrapS2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "S2: 0-80 character trap string" ::= {nevadaTraps 3} nvTrapN0 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "N0: numeric trap value" ::= {nevadaTraps 4} nvTrapN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "N1: numeric trap value" ::= {nevadaTraps 5} nvTrapN2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "N2: numeric trap value" ::= {nevadaTraps 6} -- -- -- -- Nevada Alarm/Trap conf table -- nvTrapconf OBJECT IDENTIFIER ::= { nevadaTraps 7 } nvTrapconfMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of traps that have been defined" ::= { nvTrapconf 1} nvTrapconfNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of highest record in use." ::= { nvTrapconf 2} nvTrapconfTable OBJECT-TYPE SYNTAX SEQUENCE OF NvTrapconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Traps Lists" ::= { nvTrapconf 3 } nvTrapconfEntry OBJECT-TYPE SYNTAX NvTrapconfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada Trapconf definition." INDEX { nvTrapconfIndex } ::= { nvTrapconfTable 1 } NvTrapconfEntry ::= SEQUENCE { nvTrapconfIndex INTEGER, nvTrapconfTrapId INTEGER, nvTrapconfDesc DisplayString, nvTrapconfStatus INTEGER } nvTrapconfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for traps.. for config purpose" ::= { nvTrapconfEntry 1 } nvTrapconfTrapId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The assigned enterprise trap number" ::= { nvTrapconfEntry 2 } nvTrapconfDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "The Description of the specific trap" ::= { nvTrapconfEntry 3 } nvTrapconfStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the Trap. Use enable to generate trap and disable otherwise." ::= { nvTrapconfEntry 4 } -- -- -- nvReboot OBJECT-TYPE SYNTAX INTEGER { ok (1), reboot (2), failed (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Reboot Nevada." ::= {nevadaAdmin 1} nvWriteConfig OBJECT-TYPE SYNTAX INTEGER { write (1), executing (2), successful (3), failed (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Write Configuration -save-" ::= {nevadaAdmin 2} nvDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-write STATUS mandatory DESCRIPTION "Set Nevada date/time. The Format is as follows yyyy mm dd hh mm ss" ::= {nevadaAdmin 3} nvWriteRoot OBJECT-TYPE SYNTAX INTEGER { write (1), executing (2), successful (3), failed (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Write Mediastat file (root)" ::= {nevadaAdmin 4} nvStartScript OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Script Number to Start" ::= {nevadaAdmin 5} -- -- Stringlists -- nvString OBJECT IDENTIFIER ::= { nevadaAdmin 6 } nvStringMaxRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "total number of records available for all strings allowed in database file." ::= { nvString 1} nvStringNumRec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of highest record in use." ::= { nvString 2} nvStringTable OBJECT-TYPE SYNTAX SEQUENCE OF NvStringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada String List file." ::= { nvString 3 } nvStringEntry OBJECT-TYPE SYNTAX NvStringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Nevada String record." INDEX { nvStringIndex } ::= { nvStringTable 1 } NvStringEntry ::= SEQUENCE { nvStringIndex INTEGER, nvStringData DisplayString, nvStringStatus INTEGER } nvStringIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of Nevada String record" ::= { nvStringEntry 1 } nvStringData OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "The data in the specific string, size up to 256" ::= { nvStringEntry 2 } nvStringStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation status of the record. Use valid to add record to database file and invalid to delete record from database file." ::= { nvStringEntry 3 } -- -- Nevada Traps -- -- -- ITI (async) traps -- nvTrapDeviceConnected TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1} DESCRIPTION "Probable Cause The port placed or accepted call with the attached device. Probable Effect Nevada has a network connection Recommended Action Network connection is now available for data transfer. " ::= 4352 nvTrapDeviceDisconnected TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1} DESCRIPTION "Probable Cause The port disconnected with the attached device. Probable Effect Nevada does not have a network connection on the port. Recommended Action Refer stat files itipstat, iticstat, itiustat & portstat. " ::= 4353 nvTrapDuiportavail TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1} DESCRIPTION "Probable Cause number of available ports at site Probable Effect can place calls Recommended Action place calls " ::= 4354 nvTrapNoIdlePorts TRAP-TYPE ENTERPRISE nvNas DESCRIPTION "Probable Cause All available ports are in use Probable Effect No additional users will be able to call in. Recommended Action Add more ports to the particular site. " ::= 4355 nvTrapDatatimerexpird TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1} DESCRIPTION "Probable Cause Data mode timer expired Probable Effect Recommended Action " ::= 4359 nvTrapDUIDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause Both DUI Circuits down. Probable Effect Can not accept calls. Recommended Action " ::= 4365 nvTrapDatabaseUpPrimary TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "LSERVER: Database Up: primary NUA `S0`" ::= 4377 nvTrapDatabaseUpSecondary TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "LSERVER: Database Up: secondary NUA `S0`" ::= 4378 -- -- Nevada X.25 alarms -- -- -- nevada X.25 alarms -- nvTrapLinkNotReady TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause X.25 detected that the link is down. Probable Effect Data transfer over the specified link not possible Recommended Action Correct the Physical connection and/or configuration " ::= 4668 nvTrapLinkReady TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause X.25 detected that the link has come up. Probable Effect Data transfer over the specified link possible Recommended Action New calls can now be established on this link " ::= 4669 -- -- Nevada Node Alarms -- nvTrapAlternateConfig TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Nevada running alternate config on side `n0`" ::= 5635 nvTrapDbautosave TRAP-TYPE ENTERPRISE nvNas DESCRIPTION "data base auto save" ::= 5636 nvTrapDbCrcError TRAP-TYPE ENTERPRISE nvNas DESCRIPTION "Nevada CRC error on database" ::= 5637 nvTrapDbsavecount TRAP-TYPE ENTERPRISE nvNas DESCRIPTION "save count is zero" ::= 5638 nvTrapLocalDatabaseChanged TRAP-TYPE ENTERPRISE nvNas DESCRIPTION "Nevada local database has been changed" ::= 5639 nvTrapRateIncreasedToL1 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2, nvTrapN0} DESCRIPTION "Nevada statistics rate increased to level 1" ::= 5640 nvTrapRateIncreasedToL2 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2, nvTrapN0} DESCRIPTION "Nevada statistics rate increased to level 2" ::= 5641 nvTrapRateDecreasedBelowL1 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2, nvTrapN0} DESCRIPTION "Nevada statistics rate decrease to below level 1" ::= 5642 nvTrapRateDecreasedBelowL2 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2, nvTrapN0} DESCRIPTION "Nevada statistics rate decrease to below level 2" ::= 5643 nvTrapReachedStatus TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2} DESCRIPTION "Nevada status value reached" ::= 5644 nvTrapLeftStatus TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1, nvTrapS2} DESCRIPTION "Nevada status value no longer met" ::= 5645 -- -- NMS traps -- -- -- Framer traps -- nvTrapFramerfailaction TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0, nvTrapS1} DESCRIPTION "Probable Cause framer failed to do the required action Probable Effect Recommended Action " ::= 5652 nvTrapFramerfailed TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0,nvTrapN0} DESCRIPTION "Probable Cause framer card in the indicated slot failed to do the requested action Probable Effect no traffic will flow Recommended Action check hardware and software configuration " ::= 5653 -- -- Nevada Frame Relay Traps -- nvTrapFrPortUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Nevada Frame Relay Interface up ready" ::= 11520 nvTrapFrPortDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Nevada Frame Relay Interface down not-ready" ::= 11521 nvTrapFrLMIError TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvItipstatPortname, nvTrapS0} DESCRIPTION "Probable Cause The specified frame relay interface has detected LMI error. Probable Effect Stops PVC traffic. Recommended Action Wait for LMI to enter normal state to resume PVC traffic. " ::= 11522 nvTrapFrLMINormal TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvItipstatPortname, nvTrapS0} DESCRIPTION "Probable Cause The specified frame relay interface has found LMI in normal state. Probable Effect Enables PVC traffic to resume. Recommended Action The FRI is available for data transfer. " ::= 11523 nvTrapFrAllDLCIsUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvItipstatPortname, nvTrapS0} DESCRIPTION "Probable Cause All DLCIs on the FRI are functional. Probable Effect All FRPVCs enter data transfer state. Recommended Action All FRPVCs are available for data transfer. " ::= 11524 nvTrapFrDLCIsDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvItipstatPortname, nvTrapS0} DESCRIPTION "Probable Cause One or more DLCIs on the FRI not functional. Probable Effect Data transfer will stop on the FRPVC that has gone down. Recommended Action Refer stat files fristat, frvcstat and frstat. " ::= 11525 -- -- ELX Traps -- nvTrapElxUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause ELX has gone up. Probable Effect Data can be exchanged Recommended Action Pass data through " ::= 12032 nvTrapElxDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause ELX has gone down. Probable Effect Data can not be exchanged Recommended Action Correct configuration, cable connection or the hardware setup. " ::= 12033 -- -- PPP Traps -- nvTrapPppLcpUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause The Link Control Protocol (LCP) has gone up. Probable Effect The link is configured, tested and available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action The PPP link is now available for higher-level protocol such as IPCP. " ::= 14848 nvTrapPppLcpDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause The Link Control Protocol (LCP) has gone down. Probable Effect The link is not configured and is not available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action Refer PPP statfile pppstat. " ::= 14849 nvTrapPppIpcpOnLcpUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0, nvTrapN1} DESCRIPTION "Probable Cause The IP Control Protocol (IPCP) has gone up. Probable Effect The Network Layer Protocol is selected and datagrams can be sent. Recommended Action The PPP link is now available for datagram traffic. " ::= 14850 nvPppIpcpOnLcpDown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0, nvTrapN1} DESCRIPTION "Probable Cause The IP Control Protocol (IPCP) has gone down. Probable Effect The Network Layer Protocol is not selected and datagrams can not be sent. Recommended Action Refer PPP statfile pppstat. " ::= 14851 -- -- ISDN PRI Traps -- nvTrapPriDataLayerUp TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvPristatIndex} DESCRIPTION "Probable Cause ISDN Data Layer Up PRI is functional on the DLI Probable Effect Data Channel responding. Recommended Action Unit is ready to receive ISDN calls " ::= 15136 nvTrapPriDataLayerDn TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvPristatIndex} DESCRIPTION "Probable Cause ISDN Data Layer Down PRI is Not functional on the DLI Probable Effect Data Channel not responding bchannel calls will fail Recommended Action Test the DLI and check associated Config in CDLI and PRICONF " ::= 15137 -- -- Multi link PPP traps -- nvTrapPppLcpNetworkPhase TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause The LCP protocol has entered the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can now exchange packets on the link Recommended Action None " ::= 15500 nvTrapPppLcpNetworkdown TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause The LCP protocol is down on the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can not exchange packets on the link Recommended Action " ::= 15501 nvTrapPppMpLinkAdded TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause A PPP link has been added to a multilink bundle Probable Effect Greater bandwidth is available on the bundle Recommended Action None required. Informational only " ::= 15504 nvTrapPppMpLinkDropped TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0} DESCRIPTION "Probable Cause A PPP link has been dropped from a multilink bundle Probable Effect The bandwidth for the bundle has been reduced. If this was the last link in the bundle the bundle will be closed Recommended Action None required, informational only " ::= 15505 -- DSPM MODULE nvTrapDSPMFailedModemThresh1 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause Number of Modem failures has reached the configured threshold one Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration " ::= 16896 nvTrapDSPMFailedModemThresh2 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause Number of Modem failures has reached the configured threshold two Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration " ::= 16897 nvTrapDSPMFailedModemThresh3 TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause Number of Modem failures has reached the configured threshold three Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration " ::= 16898 nvTrapDSPRFailed TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause DSPR has failed. Probable Effect DSPR card has failed -- hardware resources failure Recommended Action Replace the DSPR card " ::= 16899 -- ISDNP MODULE nvTrapISDNFailedCalls TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause Number of ISDN calls failure have reached the configured threshold Probable Effect ISDN failure -- results in failed ISDN calls Recommended Action check the ISDN IO cards/service provider/hardware " ::= 16640 -- FRAMER MODULE Base number 69 nvTrapFRAMERFailed TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause FRAMER card failure Probable Effect FRAMER card failure -- system failure Recommended Action replace the framer card " ::= 17664 -- DLI MODULE Base number 70 nvTrapQDLIFailed TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapN0} DESCRIPTION "Probable Cause QDLI card has failed Probable Effect QDLI card has failed Recommended Action None required, informational only " ::= 17920 nvTrapRemovedCard TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0,nvTrapN0} DESCRIPTION "Probable Cause a card has been deleted in the indicated slot Probable Effect a card has been deleted -- hotswap Recommended Action None required, informational only " ::= 17940 nvTrapCardInserted TRAP-TYPE ENTERPRISE nvNas VARIABLES {nvTrapS0,nvTrapN0} DESCRIPTION "Probable Cause a card has been inserted in the indicated slot Probable Effect a card has been inserted -- hotswap Recommended Action None required, informational only " ::= 17950 END