-- CPU Version: V07.01.C00 ACMIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, Counter32, Integer32, IpAddress, TimeTicks, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TimeStamp, RowStatus, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, mib-2 FROM RFC1213-MIB; lucent OBJECT IDENTIFIER ::= { enterprises 1751 } mibs OBJECT IDENTIFIER ::= { lucent 2 } acMIB MODULE-IDENTITY LAST-UPDATED "000204081230Z" ORGANIZATION "Lucent Technologies, Inc." CONTACT-INFO " " DESCRIPTION "Lucent Access Concentrator, Release 6.2" ::= { mibs 18 } IntfIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A INTEGER " SYNTAX Integer32 -- For new Connection status data type ConnFailureCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "General connection failure cause" SYNTAX INTEGER { none(1), physical(2) } FrConnFailureCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Frame Relay connection failure cause" SYNTAX INTEGER { none(1), physical(2), lmi(3), dlci(4) } AtmConnFailureCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ATM connection failure cause" SYNTAX INTEGER { none(1), physical(2), oamAis(3), oamRdi(4) } -- End of adding new connection status data type -- added imaGrpChannelEndState type ImaGrpChannelEndState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current operational state of the Near-end or far-end IM A Group State Machine." SYNTAX INTEGER { notConfigured(1), startUp(2), startUpAck(3), cfgAbtUnsupportedM(4), cfgAbtIncSymmetry(5), cfgAbtOther(6), insufficientLinks(7), blocked(8), operational(9) } -- Groups in the Access Concentrator MIB sysConfig OBJECT IDENTIFIER ::= { acMIB 1 } equipConfig OBJECT IDENTIFIER ::= { acMIB 2 } channelConfig OBJECT IDENTIFIER ::= { acMIB 3 } intfConfig OBJECT IDENTIFIER ::= { acMIB 5 } connectionConfig OBJECT IDENTIFIER ::= { acMIB 6 } userServiceConfig OBJECT IDENTIFIER ::= { acMIB 7 } sysTraps OBJECT IDENTIFIER ::= { acMIB 8 } systemEvents OBJECT IDENTIFIER ::= { sysTraps 1 } moduleEvents OBJECT IDENTIFIER ::= { sysTraps 2 } interfaceEvents OBJECT IDENTIFIER ::= { sysTraps 3 } connectionEvents OBJECT IDENTIFIER ::= { sysTraps 4 } sysStatistics OBJECT IDENTIFIER ::= { acMIB 9 } equipStatistics OBJECT IDENTIFIER ::= { acMIB 10 } intfStatistics OBJECT IDENTIFIER ::= { acMIB 11 } connectionStatistics OBJECT IDENTIFIER ::= { acMIB 12 } ipAtmGroup OBJECT IDENTIFIER ::= { acMIB 13 } iispRouting OBJECT IDENTIFIER ::= { acMIB 14 } returnCode OBJECT IDENTIFIER ::= { acMIB 15 } sysControl OBJECT IDENTIFIER ::= { acMIB 16 } stratumConfig OBJECT IDENTIFIER ::= { acMIB 17 } cellTest OBJECT IDENTIFIER ::= { acMIB 18 } sysInfo OBJECT IDENTIFIER ::= { acMIB 19 } ethernetConfig OBJECT IDENTIFIER ::= { acMIB 20 } alarmConfig OBJECT IDENTIFIER ::= { acMIB 21 } sysTest OBJECT IDENTIFIER ::= { acMIB 22 } fwDriverSup OBJECT IDENTIFIER ::= { acMIB 23 } viprConfig OBJECT IDENTIFIER ::= { acMIB 24 } toneAnnceControl OBJECT IDENTIFIER ::= { acMIB 25 } gr303Config OBJECT IDENTIFIER ::= { acMIB 26 } gr303Stats OBJECT IDENTIFIER ::= { acMIB 27 } atmTrunkingMIBObjects OBJECT IDENTIFIER ::= { acMIB 28 } protectionGroup OBJECT IDENTIFIER ::= { acMIB 29 } h248Config OBJECT IDENTIFIER ::= { acMIB 30 } h248SysControl OBJECT IDENTIFIER ::= { acMIB 31 } -- System Configuration Group sysConfig siteName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "site name - ascii" ::= { sysConfig 1 } siteID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "site id - numerical" ::= { sysConfig 2 } siteEtherIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "ip address for ethernet access to the site (switch)" ::= { sysConfig 3 } siteEtherIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "ip mask for ethernet access to the site (switch)" ::= { sysConfig 4 } siteGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "ip address for gateway access to the site (switch)" ::= { sysConfig 5 } siteAtmAddrPrefix1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is one of the two atm address prefix of this switch. " ::= { sysConfig 6 } siteAtmAddrUser1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is one of the two atm address user part of this switch." ::= { sysConfig 7 } siteRemoteMgrAddr1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "remote manager IP Address, where TRAP will be sent to." ::= { sysConfig 8 } siteRemoteMgrAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "remote manager IP Address, where TRAP will be sent to." ::= { sysConfig 9 } siteRemoteMgrAddr3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "remote manager IP Address, where TRAP will be sent to." ::= { sysConfig 10 } siteRemoteMgrAddr4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "remote manager IP Address, where TRAP will be sent to." ::= { sysConfig 11 } siteRemoteMgrAddr5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "remote manager IP Address, where TRAP will be sent to." ::= { sysConfig 12 } siteMasterNodeAtmAddr1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Master node atm address, where TRAP will be sent to." ::= { sysConfig 13 } siteMasterNodeAtmAddr2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Master node atm address, where TRAP will be sent to." ::= { sysConfig 14 } siteEnhanceFeatures OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "enhancement features capability - number consists of a sum to represent the following: 1: securedAtm 2: isdn 4: frameRelay " ::= { sysConfig 15 } siteTrapDialOutFeature OBJECT-TYPE SYNTAX INTEGER { disabled(1), dialTerminal(2), dialBeeper(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the dialing out to a remote terminal or beeper for trap notification." ::= { sysConfig 16 } siteTrapDialOutPhoneNum OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Phone number of the terminal to dial when trap notifications are phoned out" ::= { sysConfig 17 } siteTrapDialOutBeeperData OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Data (phone digits) to send to beeper if the dialBeeper option is selected." ::= { sysConfig 18 } siteDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Current date and time: 11 octets octet# contents range ------ -------- ----- 1-2 year 0..65536 3 month 1..12 4 day 1..31 5 hour 0..23 6 minutes 0..59 7 seconds 0..60(60=leap second) 8 deci-seconds 0..9 9 direction from UTC '+'/'-' 10 hours from UTC 0..11 11 minutes from UTC 0..59" ::= { sysConfig 19 } siteSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Constant value representing the version number of the current software." ::= { sysConfig 20 } -- Objects added for NEC csTcpServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of CS" ::= { sysConfig 21 } csTcpServerPortNumber OBJECT-TYPE SYNTAX INTEGER ( 1025..65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The Port Number used for communication with CS. NOTE: Port # 5000 and 6000 have been reservered for AC products. DO NOT USED THEM !!! " DEFVAL { 1025 } ::= { sysConfig 22 } keepAliveTimer OBJECT-TYPE SYNTAX INTEGER ( 0..999999999 ) MAX-ACCESS read-write STATUS current DESCRIPTION " keep alive timer can be set inbetween 0 and 999999999" ::= { sysConfig 23 } inactiveTimer OBJECT-TYPE SYNTAX INTEGER( 0..999999999 ) MAX-ACCESS read-write STATUS current DESCRIPTION " inactive timer can be set inbetween 0 and 999999999" ::= { sysConfig 24 } siteMasterNodeAddrType1 OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of address specified for master node atm address, where TRAP will be sent to." DEFVAL { nsap } ::= { sysConfig 25 } siteMasterNodeAddrType2 OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of address specified for master node atm address, where TRAP will be sent to." DEFVAL { nsap } ::= { sysConfig 26 } inBandPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the switch when the switch is accessed over the primary in-band connection." ::= { sysConfig 27 } inBandPrimaryIpMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address subnet mask of the primary in-band management IP address." ::= { sysConfig 28 } inBandBackupIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of the switch when the switch is accessed over the secondary in-band connection." ::= { sysConfig 29 } inBandBackupIpMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP address subnet mask of the secondary in-band management IP address." ::= { sysConfig 30 } inBandSvcConnectionsAllowed OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag indicating whether in-band management should be supported over SVCs." DEFVAL { disabled } ::= { sysConfig 31 } atmArpServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag indicates if this switch is an ATM ARP server." DEFVAL { disabled } ::= { sysConfig 32 } atmArpServerRemoteConnectionType OBJECT-TYPE SYNTAX INTEGER { svc(1), pvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this switch is not the ATM ARP server, indicates whether the connection to the ATM ARP server uses SVCs or PVCs." DEFVAL { svc } ::= { sysConfig 33 } atmArpServerRemoteAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs." ::= { sysConfig 34 } atmArpServerRemoteAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs." DEFVAL { nsap } ::= { sysConfig 35 } atmArpServerRemoteIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs." ::= { sysConfig 36 } atmArpServerRemoteIpMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address subnet mask of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVCs." ::= { sysConfig 37 } atmArpServerEncapsulation OBJECT-TYPE SYNTAX INTEGER { llc-snap(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of encapsulation used for IP packets over ATM in in-band management." DEFVAL { llc-snap } ::= { sysConfig 38 } siteFallbackSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Constant value representing the version number of the software to fallback to." ::= { sysConfig 41 } siteUpgradeSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Constant value representing the version number of the software to upgrade to." ::= { sysConfig 42 } siteSwitchIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address for communication with the switch, regardless of which cpu is primary." ::= { sysConfig 43 } muxTcpType OBJECT-TYPE SYNTAX INTEGER { server(1), client(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of mux TCP." DEFVAL { client } ::= { sysConfig 44 } loopbackLocationID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "ID of the ATM Node where the loopback is to occur." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'H } ::= { sysConfig 45 } oamDebouncingPeriod OBJECT-TYPE SYNTAX INTEGER (1000..300000) MAX-ACCESS read-write STATUS current DESCRIPTION "Debouncing period in milli seconds for clearing AIS/RDI state." DEFVAL { 3000 } ::= { sysConfig 46 } svcPointToPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of SVC point-to-point calls, both legs are SVCs." DEFVAL { 2000 } ::= { sysConfig 47 } svcPointToMultiPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of SVC point-to-multipoint calls, both legs are SVCs." DEFVAL { 2000 } ::= { sysConfig 48 } svcPointToMultiPointParties OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of parties on SVC point-to-multipoint calls, both legs are SVCs." DEFVAL { 2000 } ::= { sysConfig 49 } spvcCePointToPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of circuit emulation SPVC calls." DEFVAL { 2000 } ::= { sysConfig 50 } spvcTePointToPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of terminal emulation SPVC calls." DEFVAL { 2000 } ::= { sysConfig 51 } spvcAtmPointToPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of ATM SPVC calls." DEFVAL { 2000 } ::= { sysConfig 52 } cgApiCirEmCirEmPvcCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of circuit emulation to circuit emulation calls for Sapphire API." DEFVAL { 0 } ::= { sysConfig 53 } cgApiCirEmAtmPvcCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of circuit emulation to ATM calls for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 54 } cgApiAtmAtmPvcCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of ATM to ATM calls for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 55 } cgApiPointToPointSvcCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of point-to-point SVC calls for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 56 } cgApiPointToMultiPointSvcCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of point-to-multipoint SVC calls for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 57 } cgApiPointToMultiPointParties OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of parties for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 58 } callContrlResAllocApply OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "0 - not apply, 1 - apply the call control resouce allocation modification" DEFVAL { 0 } ::= { sysConfig 59 } callContrlResAllocUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of memory usage for call control resource." DEFVAL { 100 } ::= { sysConfig 60 } siteFirmwarePatchNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Constant value representing the patch number of the patch release." ::= { sysConfig 61 } spvcActRestartAll OBJECT-TYPE SYNTAX INTEGER { spvcActAtmRestartAll(1), spvcActCeRestartAll(2), spvcActTeRestartAll(3), spvcActFrRestartAll(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections" DEFVAL { spvcActAtmRestartAll } ::= { sysConfig 62 } cgSvcCutThroughOption OBJECT-TYPE SYNTAX INTEGER { cgSvcAcImplicitCutThrough(1), cgSvcCgExplicitCutThrough(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough (2) - CG sends explcit PATH_ETABLISH_REQ to request AC to cut through." DEFVAL { cgSvcAcImplicitCutThrough } ::= { sysConfig 63 } sgApiCirEmEndPoints OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of circuit emulation endpoints for Sapphire API." DEFVAL { 0 } ::= { sysConfig 64 } sgApiAtmSvcEndPoints OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of ATM SVC endpoints for Sapphire APIs" DEFVAL { 0 } ::= { sysConfig 65 } siteRemoteMgrSrcAddr1 OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ibm(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the source IP address used in all traps sent to remote manager" DEFVAL { interface } ::= { sysConfig 66 } siteRemoteMgrSrcAddr2 OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ibm(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the source IP address used in all traps sent to remote manager" DEFVAL { interface } ::= { sysConfig 67 } siteRemoteMgrSrcAddr3 OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ibm(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the source IP address used in all traps sent to remote manager" DEFVAL { interface } ::= { sysConfig 68 } siteRemoteMgrSrcAddr4 OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ibm(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the source IP address used in all traps sent to remote manager" DEFVAL { interface } ::= { sysConfig 69 } siteRemoteMgrSrcAddr5 OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ibm(2), interface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the source IP address used in all traps sent to remote manager" DEFVAL { interface } ::= { sysConfig 70 } spvcFrPointToPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of FR SPVC calls." DEFVAL { 1000 } ::= { sysConfig 71 } inBandAppAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address of the inBand application" ::= { sysConfig 72 } inBandAppAtmAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the ATM address of the inBand application" DEFVAL { nsap } ::= { sysConfig 73 } atmArpServer2RemoteAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs." ::= { sysConfig 74 } atmArpServer2RemoteAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVCs." DEFVAL { nsap } ::= { sysConfig 75 } tasmMaxAnnceDiskSpace OBJECT-TYPE SYNTAX INTEGER (1..36) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk." DEFVAL { 20 } ::= { sysConfig 76 } tasmMaxAnnce OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of tones and announcements that can be played simultaneously. This will depend on the number of control blocks allocated for collecting digits and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this." DEFVAL { 1 } ::= { sysConfig 77 } tasmMaxStdTones OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of tones that can be played simutaneously. This field has been obsoleted for optimisation of resources." DEFVAL { 10 } ::= { sysConfig 78 } tasmMemoryAction OBJECT-TYPE SYNTAX INTEGER { re-initialize(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the action to be performed on the memory in the TASM card used for storing announcements." DEFVAL { 1 } ::= { sysConfig 79 } -- -- Announcement configuration for the management of announcement files in -- the system. -- tasAnnceTable OBJECT-TYPE SYNTAX SEQUENCE OF TasAnnceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of announcements for the Tone Announcement server ." ::= { sysConfig 80 } tasAnnceEntry OBJECT-TYPE SYNTAX TasAnnceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Tone Announcement server table announcement entries." INDEX { tasAnnceId } ::= { tasAnnceTable 1 } TasAnnceEntry ::= SEQUENCE { tasAnnceId INTEGER, tasAnnceType INTEGER, tasAnnceCmprsType INTEGER, tasAnnceValid INTEGER, tasAnnceDescription DisplayString } tasAnnceId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Announcement ID." ::= { tasAnnceEntry 1 } tasAnnceType OBJECT-TYPE SYNTAX INTEGER { voice(1), toneVoice(2), userTones(3), music(4), musicVoice(5), toneMusic(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this announcement: voice indicates it is a pure voice announcement file. toneVoice indicates it is a file with tones at the beginning followed by voice. userTones indicates it is a file with purely user generated tones. music indicates it is a file with pure music. musicVoice indicates it is a file with music at the beginning followed by voice. toneMusic indicates it is a file with tones at the beginning followed by music." ::= { tasAnnceEntry 2 } tasAnnceCmprsType OBJECT-TYPE SYNTAX INTEGER { uncompressed(1), compress8k(2), compress16k(3), compress32k(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of compression used for storing this announcement: compress8k indicates 8k compression algorithm should be used. compress16k indicates 16k compression algorithm should be used. compress32k indicates 32k compression algorithm should be used." ::= { tasAnnceEntry 3 } tasAnnceValid OBJECT-TYPE SYNTAX INTEGER { good(1), olderVersion(2), corrupted(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the condition of this announcement, whether it is good, it is stored using an older compression algorithm, or it is corrupted." ::= { tasAnnceEntry 4 } tasAnnceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this announcement." ::= { tasAnnceEntry 5 } -- -- Configuration for the standard tones in the system. -- tasToneConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TasToneConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of standard physical tone attributes" ::= { sysConfig 81 } tasToneConfigEntry OBJECT-TYPE SYNTAX TasToneConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for TASM announcement entries." INDEX { tasToneId } ::= { tasToneConfigTable 1 } TasToneConfigEntry ::= SEQUENCE { tasToneId INTEGER, tasToneType INTEGER, tasToneFirstFreq INTEGER, tasToneSecondFreq INTEGER, tasToneThirdFreq INTEGER, tasToneOnTime INTEGER, tasToneOffTime INTEGER, tasToneLevel INTEGER } tasToneId OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tone ID." ::= { tasToneConfigEntry 1 } tasToneType OBJECT-TYPE SYNTAX INTEGER { dialTone(1), reorderTone(2), sitTone(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of this standard tone." ::= { tasToneConfigEntry 2 } tasToneFirstFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The first frequency value for this tone." ::= { tasToneConfigEntry 3 } tasToneSecondFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The second frequency value for this tone." ::= { tasToneConfigEntry 4 } tasToneThirdFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The third frequency value for this tone." ::= { tasToneConfigEntry 5 } tasToneOnTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The on time in the tone duty cycle." ::= { tasToneConfigEntry 6 } tasToneOffTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The off time in the tone duty cycle." ::= { tasToneConfigEntry 7 } tasToneLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The level of this tone in dBm." ::= { tasToneConfigEntry 8 } atmArpServerAtmAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server ." ::= { sysConfig 82 } atmArpServerAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server." DEFVAL { nsap } ::= { sysConfig 83 } spvcPointToMultiPointCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of SPVC point-to-multipoint calls" DEFVAL { 500 } ::= { sysConfig 84 } spvcPointToMultiPointParties OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of parties on SPVC point-to-multipoint calls." DEFVAL { 1000 } ::= { sysConfig 85 } consoleIPAddr1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "console IP Address, where TRAP will be sent." ::= { sysConfig 86 } consoleIPAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "console IP Address, where TRAP will be sent." ::= { sysConfig 87 } consoleIPAddr3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "console IP Address, where TRAP will be sent." ::= { sysConfig 88 } consolePort1 OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "port number on host where TRAP will be sent" ::= { sysConfig 89 } consolePort2 OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "port number on host where TRAP will be sent" ::= { sysConfig 90 } consolePort3 OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "port number on host where TRAP will be sent" ::= { sysConfig 91 } featureTable OBJECT-TYPE SYNTAX SEQUENCE OF FeatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of features to be turned on/off" ::= { sysConfig 92 } featureEntry OBJECT-TYPE SYNTAX FeatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for feature table" INDEX { featureId } ::= { featureTable 1 } FeatureEntry ::= SEQUENCE { featureId INTEGER, featureStaticMem Integer32, featureDesiredStatus INTEGER, featureCurrentStatus INTEGER } featureId OBJECT-TYPE SYNTAX INTEGER { pnni(1), gr303(2), vipr(3), h248(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "feature ID." ::= { featureEntry 1 } featureStaticMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum memory required to run this feature" ::= { featureEntry 2 } featureDesiredStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable / disable this feature" ::= { featureEntry 3 } featureCurrentStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This feature is enabled / disabled" ::= { featureEntry 4 } mediaGatewayControlType OBJECT-TYPE SYNTAX INTEGER { sapphire (1), h248 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Choose to use H.248 protocol or sapphire protocol" ::= { sysConfig 93 } --DSP resource Table dspResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF DspResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DSP resource usage for the whole system." ::= { sysConfig 94 } dspResourceEntry OBJECT-TYPE SYNTAX DspResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for DSP resource usage table entries." INDEX { dspResourceId } ::= { dspResourceTable 1 } DspResourceEntry ::= SEQUENCE { dspResourceId INTEGER, dspResourceAvail Integer32, dspResourceUsed Integer32, dspResourceUsedFailed Integer32, dspResourceAvailFailed Integer32 } dspResourceId OBJECT-TYPE SYNTAX INTEGER { algoSet1-aal2-non-multiplexed(1), algoSet1-aal2-std(2), algoSet2-aal2-non-multiplexed(3), algoSet2-aal2-std(4), algoSet3-aal2-non-multiplexed(5), algoSet3-aal2-std(6), algoSet5-aal1(7), algoSet6-aal2-std(8), tone-annce-cas(9), tone-annce-tas(10) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSP resource type enumerations. The algoSets describe the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. Aal modes describe the aal type used. algoSet1-aal2-non-multiplexed: resource type for algoSet1 DSP mode and non-multiplexed aal2 AAL mode. algoSet1-aal2-std : resource type for algoSet1 DSP mode and standard aal2 AAL mode. algoSet2-aal2-non-multiplexed: resource type for algoSet2 DSP mode and non-multiplexed aal2 AAL mode.aal2 AAL mode. algoSet2-aal2-std: resource type for algoSet2 DSP mode and standard aal2 AAL mode. algoSet3-aal2-non-multiplexed: resource type for algoSet3 DSP mode and non-multiplexed aal2 AAL mode. algoSet3-aal2-std: resource type for algoSet3 DSP mode and standard aal2 AAL mode. algoSet5-aal1: resource type for algoSet5 DSP mode and aal1 AAL mode. algoSet6-aal2-std: resource type for algoSet6 DSP mode and standard aal2 AAL mode. tone-annce-cas: resource type for the tone announcement interface and CAS mode of the TASM card. tone-annce-tas: resource type for the tone announcement interface and TAS mode of the TASM card. " ::= { dspResourceEntry 1 } dspResourceAvail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The available DSP resource counts how many connections can be made using this available DSP resource type in the system. " ::= { dspResourceEntry 2 } dspResourceUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The used DSP resource counts how many connections are already made using this available DSP resource type in the system." ::= { dspResourceEntry 3 } dspResourceUsedFailed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The used but failed DSP resource counts how many connections are already made using currently failed DSP resource type in the system." ::= { dspResourceEntry 4 } dspResourceAvailFailed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The available but failed DSP resource counts how many connections can be made if using currently failed DSP resource type in the system." ::= { dspResourceEntry 5 } -- End of DSP resource Table. tasmMaxDigitControlBlocks OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this ." DEFVAL { 1 } ::= { sysConfig 95 } tasmMaxTestControlBlocks OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control blocks allocated for playing tones and announcements and for digit collection as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this. " DEFVAL { 1 } ::= { sysConfig 96 } tasmMaxMemResvd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum amount of memory in megabytes reserved for TASM." ::= { sysConfig 97 } tasmControlBlockResAllocUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of memory usage for tones, announcements, digit collection and line tests control blocks." ::= { sysConfig 98 } tasmAnnceCacheMemResAllocUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be updated to reflect the cache memory that will be taken up by this announcement. Once this field shows a 100 percent usage it is an indication to the user that any additional announcement will cause the system to thrash as it clears an announcement in cache to make room for the new announcement." ::= { sysConfig 99 } siteAlternateGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabled on InBand PVCs" ::= { sysConfig 100 } ipThrottlingConfig OBJECT IDENTIFIER ::= {sysConfig 101} ipThrottlingFeatureStatus OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "CPU card IP throttling feature: off/on" DEFVAL { disabled } ::= { ipThrottlingConfig 1 } ipThrottlingAllowedInFrameRate OBJECT-TYPE SYNTAX INTEGER (1..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "CPU card IP throttling: allowed input frames per second" DEFVAL { 2000 } ::= { ipThrottlingConfig 2 } ipThrottlingLeakyBucketSize OBJECT-TYPE SYNTAX INTEGER (1..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "CPU card IP throttling: the size of leaky bucket" DEFVAL { 32 } ::= { ipThrottlingConfig 3 } ipThrottlingStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: Number of seconds since odometer was reset." ::= { ipThrottlingConfig 4 } ipThrottlingStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "CPU card IP throttling: Odometer reset button." ::= { ipThrottlingConfig 5 } ipThrottlingInPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: the total number of input packets from both Ethernet port and In-band-mgmt of the CPU card." ::= { ipThrottlingConfig 6 } ipThrottlingInPacketsPassedEi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: the number of input packets passed through the Ethernet port of the CPU card." ::= { ipThrottlingConfig 7 } ipThrottlingInPacketsDroppedEi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: the number of input packets dropped from the Ethernet port of the CPU card." ::= { ipThrottlingConfig 8 } ipThrottlingInPacketsPassedIBM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: the number of input packets passed from the In-Band-Management of the CPU card." ::= { ipThrottlingConfig 9 } ipThrottlingInPacketsDroppedIBM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CPU card IP throttling: the number of input packets dropped from the In-Band-Management of the CPU card." ::= { ipThrottlingConfig 10 } csSapphireInterfaceAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server and PSAX running as client." ::= { sysConfig 102 } trapActivationTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapActivationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of traps be turned on/off" ::= { sysConfig 103 } trapActivationEntry OBJECT-TYPE SYNTAX TrapActivationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for trapActivation table" INDEX { trapGroupId,trapIndex } ::= { trapActivationTable 1 } TrapActivationEntry ::= SEQUENCE { trapGroupId INTEGER, trapIndex Integer32, trapActivationStatus INTEGER, trapNames DisplayString, resetAction INTEGER } trapGroupId OBJECT-TYPE SYNTAX INTEGER { systemEvents (1), moduleEvents (2), interfaceEvents (3), connectionEvents (4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "trap group ID." ::= { trapActivationEntry 1 } trapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "trap index in each group." ::= { trapActivationEntry 2 } trapActivationStatus OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), permanently-activated(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "activated: trap message activated. deactivated: trap message deactivated. permanently-activated: trap message can not be deactivated." DEFVAL { activated } ::= { trapActivationEntry 3 } trapNames OBJECT-TYPE SYNTAX DisplayString (SIZE(50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the trap" ::= { trapActivationEntry 4 } resetAction OBJECT-TYPE SYNTAX INTEGER { set-all-active(1), set-all-deactive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "set-all-active: set all trap active one group. set-all-deactive: set all trap deactive in a group." DEFVAL { set-all-active } ::= { trapActivationEntry 5 } spvcGlobalPriorityScheme OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks." DEFVAL { disabled } ::= { sysConfig 104 } spvcPriorityScheme OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag indicating whether priority scheme should be supported in SPVCs." DEFVAL { disabled } ::= { sysConfig 105 } spvcTrunkingPriorityScheme OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag indicating whether priority scheme should be supported in SPVC-trunks." DEFVAL { disabled } ::= { sysConfig 106 } atmTrunkVccs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs)." DEFVAL { 100 } ::= { sysConfig 107 } atmTrunkNarrowBandCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The total number of ATM Trunking Narrow Band Calls supported" DEFVAL { 1000 } ::= { sysConfig 108 } dspResourceFeatureConfig OBJECT IDENTIFIER ::= { sysConfig 109 } dspReroutingFeature OBJECT-TYPE SYNTAX INTEGER { disabled (1), auto-rerouting-enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Dsp2 Rerouting Feature.This is used to enable or disable rerouting of connections when a dsp chip or card fails." DEFVAL { auto-rerouting-enabled } ::= { dspResourceFeatureConfig 1 } -- Stratum Configuration Group stratumConfig -- Equipment Configuration Group -- The switch supports the following loopback configurations for some of the -- interface ports, e.g., ds3, ds1, e1, e3, and oc3. -- noLoop mode -- The interface is not in a loop back state and signal -- flow is normal. -- __________________________ -- [ ] -- [ SWITCH ] ___ signal flow -- [ ] / -- ==<=================<====================<== -- I/O port ===> ## ## <=== I/O port -- ==>=================>====================>== -- [ ] \___ signal flow -- [ ] -- [__________________________] -- localLoop mode -- The signal received from far end I/O port, that is supposed -- to be transmitted out at this interface does go through the -- device (maximum penetration) but is looped back out. -- __________________________ -- [ ] -- [ SWITCH ] -- [ ] -- [ ====<==========================<== -- I/O port ===> ## | ## <=== I/O port -- [ ====>==========================>== -- [ ] -- [ ] -- [__________________________] -- lineLoop mode -- The received signal at this interface does not go through -- the device (minimum penetration) but is looped back out. -- __________________________ -- [ ] -- [ SWITCH ] -- [ ] -- ==>======= ] -- I/O port ===> ## | ## <=== I/O port -- ==<======= ] -- [ ] -- [ ] -- [__________________________] -- payloadLoop mode -- The received signal at this interface goes through the -- device (maximum penetration) but is looped back out. -- __________________________ -- [ ] -- [ SWITCH ] -- [ ] -- ==>==========================>==== ] -- I/O port ===> ## | ## <=== I/O port -- ==<==========================<==== ] -- [ ] -- [ ] -- [__________________________] cardTable OBJECT-TYPE SYNTAX SEQUENCE OF CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of card configuration data" ::= { equipConfig 1 } cardEntry OBJECT-TYPE SYNTAX CardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ac120 card" INDEX { cardSlot } ::= { cardTable 1 } CardEntry ::= SEQUENCE { cardSlot INTEGER, cardType INTEGER, cardProtectionStatus INTEGER, cardOperStatus INTEGER, cardAdminStatus INTEGER, cardAlarmStatus INTEGER, cardCleiCode DisplayString, cardRevision Integer32, cardSerialNumber DisplayString, cardOperatingMode INTEGER, protectionConfigMode INTEGER, protectionStatus INTEGER, protectionSlot INTEGER } cardSlot OBJECT-TYPE SYNTAX INTEGER (1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Physical slot location. Valid range is a number between 1 and 24." ::= { cardEntry 1 } cardType OBJECT-TYPE SYNTAX INTEGER { none(1), taxi(2), oC-3c(3), dS3-ATM(4), dS1-CE(5), dS1-ATM(6), e1-CE(7), e3-ATM(8), highSpeed(9), mSerial(10), dSP1(11), tWStation(12), tWOffice(13), cPU(14), stratum(15), pwrSupply(16), protectionCard(17), e1-ATM(18), ethernet(19), enhDS1(20), enhE1(21), oC-3cMMAQ(22), oC-3cMMTS(23), oC-3cSMAQ(24), oC-3cSMTS(25), sTM-1SMAQ(26), sTM-1SMTS(27), sTM-1MMAQ(28), sTM-1MMTS(29), dS3-FR(30), dSP2A(31), dS1-IMA(32), e1-IMA(33), alarm(34), dSP2B(35), aps-OC-3cSM(36), aps-OC-3cMM(37), msp-STM-1SM(38), msp-STM-1MM(39), cH-DS3(40), cH-STS1(41), rT-S(42), cC-Server(43), hD-E1(44), hD-DS1(45), dS3-IMA(46), dSP2C(47), tasm(48), mD-DS1(49), quadSerial(50), mD-DS1-IMA(51), mD-E1-IMA(52), hD-DS1-IMA(53), hD-E1-IMA(54), chDS3STS1-3P(55), unstDS3E3-3P(56), dS3E3-ATM-3P(57), oC12c-STM4-MM(58), oC12c-STM4-SM(59), dSP2D(60), ethernet-4P(61), chDS3STS1-3P-Prot(62), alarm-fan(63), dS1-Nx64CAS(64) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of card in a physical slot. A specific type of card is associated with each number. none(1) no board present taxi(2) Taxi oC-3c(3) OC3 dS3-ATM(4) DS3 ATM dS1-CE(5) DS1 circuit emulation dS1-ATM(6) DS1 ATM e1-CE(7) E1 circuit emulation e3-ATM(8) E3 ATM highSpeed(9) High Speed Serial mSerial(10) Multi Serial dSP1(11) DSP tWStation(12) Two Wire Station tWOffice(13) Two Wire Office cPU(14) Central Processor Unit stratum(15) Stratum pwrSupply(16) Power Supply protectionCard(17) protection card e1-ATM(18) E1 ATM ethernet(19) Ethernet enhDS1(20) Enhanced DS1 enhE1(21) Enhanced E1 oC-3cMMAQ(22) OC3 Multimode Aqueman oC-3cMMTS(23) OC3 Multimode Traffic Shaping oC-3cSMAQ(24) OC3 Singlemode Aqueman oC-3cSMTS(25) OC3 Singlemode Traffic Shaping sTM-1SMAQ(26) STM1 Singlemode Aqueman sTM-1SMTS(27) STM1 Singlemode Traffic Shaping sTM-1MMAQ(28) STM1 Multimode Aqueman sTM-1MMTS(29) STM1 Multimode Traffic Shaping dS3-FR(30) DS3 Frame Relay dSP2A(31) DSP2 card revision 2A dS1-IMA(32) DS1 Inverse Multiplexing over ATM (IMA) I/O card e1-IMA(33) E1 IMA alarm(34) alarm card dSP2B(35) DSP card revision 2B aps-OC-3cSM(36) Automatic Protection Switching OC3 Single Mode aps-OC-3cMM(37) Automatic Protection Switching OC3 Multi Mode msp-STM-1SM(38) Multi Switch Protection STM1 Singemode msp-STM-1MM(39) Multi Switch Protection STM1 Multimode cH-DS3(40) Channelized DS3 cH-STS1(41) Channelized STS1 rT-S(42) Route Server cC-Server(43) Continuity Check Server hD-E1(44) High Density E1 hD-DS1(45) High Density DS1 dS3-IMA(46) DS3 IMA dSP2C(47) DSP card revision 2C tasm(48) Tone Announcement Service Module mD-DS1(49) Medium Density DS1 quadSerial(50) Quad Serial mD-DS1-IMA(51) Medium Density DS1 IMA mD-E1-IMA(52) Medium Density E1 IMA hD-DS1-IMA(53) High Density DS1 IMA hD-E1-IMA(54) High Density E1 IMA chDS3STS1-3P(55) 3-port channelized DS3 STS1 unstDS3E3-3P(56) 3-port unstructured DS3 E3 dS3E3-ATM-3P(57) 3-port DS3 E3 ATM oC12c-STM4-MM(58) OC12 STM4 Multimode oC12c-STM4-SM(59) OC12 STM4 Singlemode dSP2D(60) DSP card revision 2D ethernet-4P(61) 4-port Ethernet chDS3STS1-3P-Prot(62) 3-port channelized DS3 STS1 protection alarm-fan(63) alarm fan card dS1-Nx64CAS(64) DS1 card supporting N x 64 CAS" DEFVAL { none } ::= { cardEntry 2 } cardProtectionStatus OBJECT-TYPE SYNTAX INTEGER { none(1), protected(2), wrongType(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current protection status of the card: none if the card is un-protected; protected if it is under the protection of another card; wrongType if the card types of protection card and protected card are different." DEFVAL { none } ::= { cardEntry 3 } cardOperStatus OBJECT-TYPE SYNTAX INTEGER { primary(1), standby(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational status of the card. For I/O card, it is primary if configured, it is unknown if unconfigured, or removed. For CPU, it is primary if the CPU is master CPU, or standby if the CPU is slave CPU." DEFVAL { unknown } ::= { cardEntry 4 } cardAdminStatus OBJECT-TYPE SYNTAX INTEGER { switchProtection(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "administrative status" ::= { cardEntry 5 } cardAlarmStatus OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), wrongCardType(2), lineFailed(3), cardRemoved(4), referenceClockFailed(5), compositeClockFailed(6), overload(7), plus5vFailed(8), plus120vFailed(9), minus48vFailed(10), unknownAlarm(11), completeClockFailed(12), backplaneCircuitryFailed(13), powerFailed(14), inputPortClkFailed(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "last alarm occurred" DEFVAL { noAlarm } ::= { cardEntry 6 } cardCleiCode OBJECT-TYPE SYNTAX DisplayString (SIZE(10)) MAX-ACCESS read-only STATUS current DESCRIPTION "CLEI code" ::= { cardEntry 7} cardRevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card Revision number" ::= { cardEntry 8} cardSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) MAX-ACCESS read-only STATUS current DESCRIPTION "Serial Number" ::= { cardEntry 9} cardOperatingMode OBJECT-TYPE SYNTAX INTEGER { none(1), dS3(2), e3(3), sTS1e(4), oC12(5), sTM4(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode of operation for a card. This is applicable to those card types which can be configured in a dual mode. e.g. unstDS3E3-3P can be operational as either a 3 port DS3 or E3 card. All ports on the card will be of the same type depending on the card's operating mode." DEFVAL { none } ::= { cardEntry 10 } protectionConfigMode OBJECT-TYPE SYNTAX INTEGER { unprotected(1), protection(2), working(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Protection Configuration Mode of a Card unprotected: Card is not in protection or protected state protection: Card is in protection state working: Card is in protected/working state and this state is read only and cannot be set by the user" DEFVAL { unprotected } ::= { cardEntry 11 } protectionStatus OBJECT-TYPE SYNTAX INTEGER { none(1), inservice-Active(2), inservice-Standby(3), outOfService-Active(4), outOfService-Standby(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Protection Status of a card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not." DEFVAL { none } ::= { cardEntry 12 } protectionSlot OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "If Protection Config Mode is Working then this field gives the protection slot." ::= { cardEntry 13 } taxiPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TaxiPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 2 } taxiPortConfigEntry OBJECT-TYPE SYNTAX TaxiPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { taxiPortId } ::= { taxiPortConfigTable 1 } TaxiPortConfigEntry ::= SEQUENCE { taxiPortId Integer32, taxiPortType INTEGER, taxiLineStatus INTEGER, taxiOutputTransferRate INTEGER } taxiPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { taxiPortConfigEntry 1 } taxiPortType OBJECT-TYPE SYNTAX INTEGER { taxi100(1), taxi140(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " taxi type" DEFVAL { taxi100 } ::= { taxiPortConfigEntry 2 } taxiLineStatus OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "taxi line status: 1: NoAlarm 2: Loss of Signal " DEFVAL { 1 } ::= { taxiPortConfigEntry 3 } taxiOutputTransferRate OBJECT-TYPE SYNTAX INTEGER { fullRate(1), halfRate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "User selectable parameter which allows the outgoing rate of the port to be reduced to 50% taxi, halfRate, only on AQueMan." DEFVAL { fullRate } ::= { taxiPortConfigEntry 4 } ds3PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ds3 specific port attributes" ::= { equipConfig 3 } ds3PortConfigEntry OBJECT-TYPE SYNTAX Ds3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ds3 specific port attributes" INDEX { ds3PortId } ::= { ds3PortConfigTable 1 } Ds3PortConfigEntry ::= SEQUENCE { ds3PortId Integer32, ds3LineType INTEGER, ds3LineCoding INTEGER, ds3LoopbackConfig INTEGER, ds3TransmitClockSource INTEGER, ds3LineStatus INTEGER, ds3LineBuildOut INTEGER, ds3LineScramble INTEGER, ds3CellMapping INTEGER, ds3SendCode INTEGER, ds3OutputTxRate INTEGER } ds3PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "slot/port: SSPP" ::= { ds3PortConfigEntry 1 } ds3LineType OBJECT-TYPE SYNTAX INTEGER { cbitParity(1), clearChannel(2), m13(3), m23(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the variety of DS3 C-bit implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987." DEFVAL { cbitParity } ::= { ds3PortConfigEntry 2 } ds3LineCoding OBJECT-TYPE SYNTAX INTEGER { b3zs(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length." DEFVAL { b3zs } ::= { ds3PortConfigEntry 3 } ds3LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the DS3 interface. See above diagrams for explanations of loops." DEFVAL { noLoop } ::= { ds3PortConfigEntry 4 } ds3TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), cardFreeRun(3), adaptiveTiming(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used" DEFVAL { localTiming } ::= { ds3PortConfigEntry 5 } ds3LineStatus OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback" DEFVAL { 1 } ::= { ds3PortConfigEntry 6 } ds3LineBuildOut OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds3 line build out" DEFVAL { short } ::= { ds3PortConfigEntry 7 } ds3LineScramble OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds3 line scramble" DEFVAL { enabled } ::= { ds3PortConfigEntry 8 } ds3CellMapping OBJECT-TYPE SYNTAX INTEGER { plcp(1), directMapping(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds3 cell mapping method" DEFVAL { plcp } ::= { ds3PortConfigEntry 9 } ds3SendCode OBJECT-TYPE SYNTAX INTEGER { noCode(1), lineLoopCode(2), deactivateCode(3), testPattern(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the ds3 interface by the device. The values mean: 'noCode' - sending looped or normal data 'lineLoopCode' - sending a request for a line loopback 'deactivateCode' - sending a loopback deactivation request 'testPattern' - sending a test pattern" DEFVAL { noCode } ::= { ds3PortConfigEntry 10 } ds3OutputTxRate OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The ability to adjust the bandwidth of DS3 in tx direction. The adjustable DS3 bandwidth will support 1% increments." DEFVAL { 100 } ::= { ds3PortConfigEntry 11 } msPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MsPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of multi-serial card's port attributes" ::= { equipConfig 4 } msPortConfigEntry OBJECT-TYPE SYNTAX MsPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for multi-serial port attributes" INDEX { msPortId } ::= { msPortConfigTable 1 } MsPortConfigEntry ::= SEQUENCE { msPortId IntfIndex, msLineCoding INTEGER, msBaudRate INTEGER, msProtocol INTEGER, msEquipmentType INTEGER, msRs232XmitMode INTEGER, msRs232Parity INTEGER, msRs232DataBits INTEGER, msRs232StopBits INTEGER, msTxDataClkSrcForDte INTEGER, msTxDataClkSrcForDce INTEGER, msRxDataClkSrcForDce INTEGER, msRxClkPolarity INTEGER, msTxClkPolarity INTEGER, msKgResync INTEGER, msHandshake INTEGER, msSpeedAdaption INTEGER, msBitStuffing INTEGER, msLineStatus INTEGER, msRxDataPolarity INTEGER, msTxDataPolarity INTEGER, msLoopbackConfig INTEGER, msLOSDetection INTEGER } msPortId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "slot/port: SSPP" ::= { msPortConfigEntry 1 } msLineCoding OBJECT-TYPE SYNTAX INTEGER { nrz(1) } MAX-ACCESS read-only STATUS current DESCRIPTION " Line Coding." DEFVAL { nrz } ::= { msPortConfigEntry 2 } msBaudRate OBJECT-TYPE SYNTAX INTEGER { baud300(1), baud600(2), baud900(3), baud1200(4), baud1800(5), baud2400(6), baud3600(7), baud4800(8), baud7200(9), baud9600(10), baud14400(11), baud19200(12), baud28800(13), baud38400(14), baud57600(15), baud76800(16), baud115200(17), baud16k(18), baud32k(19), baud56k(20), baud64k(21), baud112k(22), baud128k(23), baud168k(24), baud192k(25), baud224k(26), baud256k(27), baud280k(28), baud320k(29), baud336k(30), baud384k(31), baud392k(32), baud448k(33), baud504k(34), baud512k(35), baud560k(36), baud576k(37), baud616k(38), baud640k(39), baud672k(40), baud704k(41), baud728k(42), baud768k(43), baud784k(44), baud832k(45), baud840k(46), baud896k(47), baud952k(48), baud960k(49), baud1008k(50), baud1024k(51), baud1064k(52), baud1088k(53), baud1120k(54), baud1152k(55), baud1176k(56), baud1216k(57), baud1232k(58), baud1280k(59), baud1288k(60), baud1344k(61), baud1400k(62), baud1408k(63), baud1456k(64), baud1472k(65), baud1512k(66), baud1536k(67), baud1568k(68), baud1600k(69), baud1624k(70), baud1664k(71), baud1680k(72), baud1728k(73), baud1736k(74), baud1792k(75), baud1856k(76), baud1920k(77), baud1984k(78), baud2048k(79), baud75(80), baud1848k(81), baud1904k(82), baud1960k(83), baud2016k(84), baud2072k(85), baud2112k(86), baud2128k(87), baud2176k(88), baud2184k(89), baud2240k(90), baud2296k(91), baud2304k(92), baud2352k(93), baud2368k(94), baud2408k(95), baud2432k(96), baud2464k(97), baud2496k(98), baud2520k(99), baud2560k(100), baud2576k(101), baud2624k(102), baud2632k(103), baud2688k(104), baud2744k(105), baud2752k(106), baud2800k(107), baud2816k(108), baud2856k(109), baud2880k(110), baud2912k(111), baud2944k(112), baud2968k(113), baud3008k(114), baud3024k(115), baud3072k(116), baud3080k(117), baud3136k(118), baud3192k(119), baud3200k(120), baud3248k(121), baud3264k(122), baud3304k(123), baud3328k(124), baud3360k(125), baud3392k(126), baud3416k(127), baud3456k(128), baud3472k(129), baud3520k(130), baud3528k(131), baud3584k(132), baud3640k(133), baud3648k(134), baud3696k(135), baud3712k(136), baud3752k(137), baud3776k(138), baud3808k(139), baud3840k(140), baud3864k(141), baud3904k(142), baud3920k(143), baud3968k(144), baud3976k(145), baud4032k(146), baud4088k(147), baud4096k(148), baud4144k(149), baud4160k(150), baud4200k(151), baud4224k(152), baud4256k(153), baud4288k(154), baud4312k(155), baud4352k(156), baud4368k(157), baud4416k(158), baud4424k(159), baud4480k(160), baud4536k(161), baud4544k(162), baud4592k(163), baud4608k(164), baud4648k(165), baud4672k(166), baud4704k(167), baud4736k(168), baud4760k(169), baud4800k(170), baud4816k(171), baud4864k(172), baud4872k(173), baud4928k(174), baud4984k(175), baud4992k(176), baud5040k(177), baud5056k(178), baud5096k(179), baud5120k(180), baud5152k(181), baud5184k(182), baud5208k(183), baud5248k(184), baud5264k(185), baud5312k(186), baud5320k(187), baud5376k(188), baud5432k(189), baud5440k(190), baud5488k(191), baud5504k(192), baud5544k(193), baud5568k(194), baud5600k(195), baud5632k(196), baud5656k(197), baud5696k(198), baud5712k(199), baud5760k(200), baud5768k(201), baud5824k(202), baud5880k(203), baud5888k(204), baud5936k(205), baud5952k(206), baud5992k(207), baud6016k(208), baud6048k(209), baud6080k(210), baud6104k(211), baud6144k(212), baud6160k(213), baud6208k(214), baud6216k(215), baud6272k(216), baud6328k(217), baud6336k(218), baud6384k(219), baud6400k(220), baud6440k(221), baud6464k(222), baud6496k(223), baud6528k(224), baud6552k(225), baud6592k(226), baud6608k(227), baud6656k(228), baud6664k(229), baud6720k(230), baud6776k(231), baud6784k(232), baud6832k(233), baud6848k(234), baud6888k(235), baud6912k(236), baud6944k(237), baud6976k(238), baud7000k(239), baud7040k(240), baud7056k(241), baud7104k(242), baud7112k(243), baud7168k(244), baud7224k(245), baud7232k(246), baud7280k(247), baud7296k(248), baud7336k(249), baud7360k(250), baud7392k(251), baud7424k(252), baud7448k(253), baud7488k(254), baud7504k(255), baud7552k(256), baud7560k(257), baud7616k(258), baud7680k(259), baud7672k(260), baud7728k(261), baud7744k(262), baud7784k(263), baud7808k(264), baud7840k(265), baud7872k(266), baud7896k(267), baud7936k(268), baud7952k(269), baud8000k(270), baud8008k(271), baud8064k(272), baud8120k(273), baud8128k(274), baud8176k(275), baud8192k(276), baud8232k(277), baud8256k(278), baud8288k(279), baud8320k(280), baud8344k(281), baud8384k(282), baud8400k(283), baud8448k(284), baud8456k(285), baud8512k(286), baud8568k(287), baud8576k(288), baud8624k(289), baud8640k(290), baud8680k(291), baud8704k(292), baud8736k(293), baud8768k(294), baud8792k(295), baud8832k(296), baud8848k(297), baud8896k(298), baud8904k(299), baud8960k(300), baud9016k(301), baud9024k(302), baud9072k(303), baud9088k(304), baud9128k(305), baud9152k(306), baud9184k(307), baud9216k(308), baud9240k(309), baud9280k(310), baud9296k(311), baud9344k(312), baud9352k(313), baud9408k(314), baud9464k(315), baud9472k(316), baud9520k(317), baud9536k(318), baud9576k(319), baud9600k(320), baud9632k(321), baud9664k(322), baud9688k(323), baud9728k(324), baud9744k(325), baud9792k(326), baud9800k(327), baud9856k(328), baud9912k(329), baud9920k(330), baud9968k(331), baud9984k(332), baud10024k(333), baud10048k(334), baud10080k(335), baud10112k(336), baud10136k(337), baud10176k(338), baud10192k(339), baud10240k(340), baud10248k(341), baud10304k(342), baud10360k(343), baud10368k(344), baud10416k(345), baud10432k(346), baud10472k(347), baud10496k(348), baud10528k(349), baud10560k(350), baud10584k(351), baud10624k(352), baud10640k(353), baud10688k(354), baud10696k(355), baud10752k(356), baud10808k(357), baud10816k(358), baud10864k(359), baud10880k(360), baud10920k(361), baud10944k(362), baud10976k(363), baud11008k(364), baud11032k(365), baud11072k(366), baud11088k(367), baud11136k(368), baud11144k(369), baud11200k(370), baud11256k(371), baud11264k(372), baud11312k(373), baud11328k(374), baud11368k(375), baud11392k(376), baud11424k(377), baud11456k(378), baud11480k(379), baud11520k(380), baud11536k(381), baud11584k(382), baud11592k(383), baud11648k(384), baud11704k(385), baud11712k(386), baud11760k(387), baud11776k(388), baud11816k(389), baud11840k(390), baud11872k(391), baud11904k(392), baud11928k(393), baud11968k(394), baud11984k(395), baud12032k(396), baud12040k(397), baud12096k(398), baud12152k(399), baud12160k(400), baud12208k(401), baud12224k(402), baud12264k(403), baud12288k(404), baud12320k(405), baud12352k(406), baud12376k(407), baud12416k(408), baud12432k(409), baud12480k(410), baud12488k(411), baud12544k(412), baud12600k(413), baud12608k(414), baud12656k(415), baud12672k(416), baud12712k(417), baud12736k(418), baud12768k(419), baud12800k(420), baud12824k(421), baud12864k(422), baud12880k(423), baud12928k(424), baud12936k(425), baud12992k(426), baud13048k(427), baud13056k(428), baud13104k(429), baud13120k(430), baud13160k(431), baud13184k(432), baud13216k(433), baud13248k(434), baud13272k(435), baud13312k(436), baud13328k(437), baud13376k(438), baud13384k(439), baud13440k(440), baud13496k(441), baud13504k(442), baud13552k(443), baud13568k(444), baud13608k(445), baud13632k(446), baud13664k(447), baud13696k(448), baud13720k(449), baud13760k(450), baud13776k(451), baud13824k(452), baud13832k(453), baud13888k(454), baud13944k(455), baud13952k(456), baud14000k(457), baud14016k(458), baud14056k(459), baud14080k(460), baud14112k(461), baud14144k(462), baud14168k(463), baud14208k(464), baud14224k(465), baud14272k(466), baud14280k(467), baud14336k(468), baud14400k(469), baud14464k(470), baud14528k(471), baud14592k(472), baud14656k(473), baud14720k(474), baud14784k(475), baud14848k(476), baud14912k(477), baud14976k(478), baud15040k(479), baud15104k(480), baud15168k(481), baud15232k(482), baud15296k(483), baud15360k(484), baud15424k(485), baud15488k(486), baud15552k(487), baud15616k(488), baud15680k(489), baud15744k(490), baud15808k(491), baud15872k(492), baud15936k(493), baud16000k(494), baud16064k(495), baud16128k(496), baud16192k(497), baud16256k(498), baud16320k(499), baud16384k(500), baud1544k(501), baud230400(502), baud150(503) } MAX-ACCESS read-write STATUS current DESCRIPTION "baud rate is determined by multiplying this number by the msBaudRateMultiplier" DEFVAL { baud300 } ::= { msPortConfigEntry 3 } msProtocol OBJECT-TYPE SYNTAX INTEGER { rs232(1), rs449(2), rs530(3), v35(4), x21(5), kg(6), rs530A(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "protocol type for serial port" DEFVAL { rs449 } ::= { msPortConfigEntry 4 } msEquipmentType OBJECT-TYPE SYNTAX INTEGER { dte(1), dce(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Equipment type" DEFVAL { dte } ::= { msPortConfigEntry 5 } msRs232XmitMode OBJECT-TYPE SYNTAX INTEGER { synchronous(1), asynchronous(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "transmit mode for rs232 DTE/DCE serial port" DEFVAL { synchronous } ::= { msPortConfigEntry 6 } msRs232Parity OBJECT-TYPE SYNTAX INTEGER { none(1), odd(2), even(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "parity for rs232 DTE/DCE serial port" DEFVAL { none } ::= { msPortConfigEntry 7 } msRs232DataBits OBJECT-TYPE SYNTAX INTEGER { eight(1), seven(2), six(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "data bits for rs232 DTE/DCE serial port" DEFVAL { eight } ::= { msPortConfigEntry 8 } msRs232StopBits OBJECT-TYPE SYNTAX INTEGER { one(1), two(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "stop bits for rs232 DTE/DCE serial port" DEFVAL { one } ::= { msPortConfigEntry 9 } msTxDataClkSrcForDte OBJECT-TYPE SYNTAX INTEGER { localTiming(1), txRxTiming(2), txTiming(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit data clock source for DTE, externalTx in is not valid for rs232. This field is ignored if the local side is DCE." DEFVAL { localTiming } ::= { msPortConfigEntry 10 } msTxDataClkSrcForDce OBJECT-TYPE SYNTAX INTEGER { localTiming(1), loopTiming(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE" DEFVAL { localTiming } ::= { msPortConfigEntry 11 } msRxDataClkSrcForDce OBJECT-TYPE SYNTAX INTEGER { localTiming(1), externalTiming(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Receive data clock source for DCE localTiming: a local clock source is used. (e.g., from backplane (stratum) loopTiming: from remote This field is ignored if the local side is DTE" DEFVAL { localTiming } ::= { msPortConfigEntry 12 } msRxClkPolarity OBJECT-TYPE SYNTAX INTEGER { standard(1), inverted (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to reverse the receive clock" DEFVAL { standard } ::= { msPortConfigEntry 13 } msTxClkPolarity OBJECT-TYPE SYNTAX INTEGER { standard(1), inverted (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to reverse the transmit clock" DEFVAL { standard } ::= { msPortConfigEntry 14 } msKgResync OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turn KG resync on/off" DEFVAL { enabled } ::= { msPortConfigEntry 15 } msHandshake OBJECT-TYPE SYNTAX INTEGER { observed(1), ignored(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Multiserial Module handshake: observed : used with AAL1 to monitor RTS/CTS exchange." DEFVAL { ignored } ::= { msPortConfigEntry 16 } msSpeedAdaption OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of allowing speed adaption" DEFVAL { enabled } ::= { msPortConfigEntry 17 } msBitStuffing OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When msBitStuffing is enabled, CAC throughput is (1 + 1/7) user throughtput. Otherwise the CAC throughput is the same as the user throughput. msBitStuffing can only be enabled for circuit emulation interfaces. " DEFVAL { disabled } ::= { msPortConfigEntry 18 } msLineStatus OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "line status on the port: The msLineStatus is a bit map representation. It can represent multiple failures (alarms) if supported by the card. NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1: NoAlarm 2: Loss of Signal " DEFVAL { 1 } ::= { msPortConfigEntry 19 } msRxDataPolarity OBJECT-TYPE SYNTAX INTEGER { standard(1), inverted (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to reverse the receive data" DEFVAL { standard } ::= { msPortConfigEntry 20} msTxDataPolarity OBJECT-TYPE SYNTAX INTEGER { standard(1), inverted (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not to reverse the transmit data" DEFVAL { standard } ::= { msPortConfigEntry 21 } msLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the Serial port." DEFVAL { noLoop } ::= { msPortConfigEntry 22 } msLOSDetection OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of detection of LOS by IO card. LOS detection is always enabled when msBitStuffing is enabled. When the interface is not circuit emulation, the IO card does not report any LOS." DEFVAL { disabled } ::= { msPortConfigEntry 23 } ds1PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ds1 specific port attributes" ::= { equipConfig 5 } ds1PortConfigEntry OBJECT-TYPE SYNTAX Ds1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ds1 specific port attributes" INDEX { ds1PortId } ::= { ds1PortConfigTable 1 } Ds1PortConfigEntry ::= SEQUENCE { ds1PortId Integer32, ds1Channelization INTEGER, ds1LineType INTEGER, ds1LineCoding INTEGER, ds1LoopbackConfig INTEGER, ds1TransmitClockSource INTEGER, ds1LineBuildOut INTEGER, ds1LineStatus INTEGER, ds1EnhanceFeatureSet1 INTEGER, ds1DataTransferType INTEGER, ds1OamInterworkingType INTEGER, ds1ConnGatewayFeature INTEGER, ds1InLineCode INTEGER } ds1PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - slot/port: SSPP" ::= { ds1PortConfigEntry 1 } ds1Channelization OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds1 interface type" DEFVAL { disabled } ::= { ds1PortConfigEntry 2 } ds1LineType OBJECT-TYPE SYNTAX INTEGER { esf(1), d4(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds1 interface type" DEFVAL { esf } ::= { ds1PortConfigEntry 3 } ds1LineCoding OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds1 interface type" DEFVAL { b8zs } ::= { ds1PortConfigEntry 4 } ds1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the ds1 interface" DEFVAL { noLoop } ::= { ds1PortConfigEntry 5 } ds1TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), adaptive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds1 timing source" DEFVAL { localTiming } ::= { ds1PortConfigEntry 6 } ds1LineBuildOut OBJECT-TYPE SYNTAX INTEGER { upTo133Feet(1), upTo266Feet(2), upTo399Feet(3), upTo533Feet(4), upTo655Feet(5), negative7-5Db(6), negative15Db(7), negative22-5Db(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "ds1 line build out" ::= { ds1PortConfigEntry 7 } ds1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. ds1NoAlarm should be set if and only if no other flag is set. If the ds1LoopbackState bit is set, the loopbak in effect can be determined from the ds1LoopbackConfig object. The various bit positions are: 1: dsx1NoAlarm: No Alarm Present 2: dsx1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: dsx1XmtFarEndLOF: Near end sending LOF Indication 8: dsx1RcvAIS: Far end sending AIS 16: dsx1XmtAIS: Near end sending AIS 32: dsx1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: dsx1LossOfSignal: Near end Loss Of Signal 128: dsx1LoopbackState: Near end is looped 256: dsx1T16AIS: E1 TS16 AIS 512: dsx1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: dsx1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: dsx1RcvTestCode: Near End detects a test code 4096: dsx1OtherFailure: any line status not defined here 8192: dsx1RmtLoopback: Far end loopback" DEFVAL { 1 } ::= { ds1PortConfigEntry 8 } -- Object added for NEC ds1EnhanceFeatureSet1 OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under this scheme." DEFVAL { disabled } ::= { ds1PortConfigEntry 10 } ds1DataTransferType OBJECT-TYPE SYNTAX INTEGER { structured(1), unstructured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DS1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire T1 frame except the F-bit." DEFVAL { structured } ::= { ds1PortConfigEntry 11 } ds1OamInterworkingType OBJECT-TYPE SYNTAX INTEGER { trunkCond(1), unframed1s(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the interworking is done by trunk conditioning or unframed1s" DEFVAL {trunkCond} ::= {ds1PortConfigEntry 12 } ds1ConnGatewayFeature OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable/disable connection gateway (Sapphire) API." DEFVAL { disabled } ::= { ds1PortConfigEntry 14 } ds1InLineCode OBJECT-TYPE SYNTAX INTEGER { aNSI(1), ds1-ANI(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To select and support the inlinecode option in either ANSI or DS1_ANI (ANI: Access Network Interface)" DEFVAL { aNSI } ::= { ds1PortConfigEntry 15 } oc3PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Oc3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 6 } oc3PortConfigEntry OBJECT-TYPE SYNTAX Oc3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { oc3PortId } ::= { oc3PortConfigTable 1 } Oc3PortConfigEntry ::= SEQUENCE { oc3PortId Integer32, oc3LoopbackConfig INTEGER, oc3TransmitClockSource INTEGER, oc3LineStatus INTEGER, oc3OutputTransferRate INTEGER, oc3APSConfiguration INTEGER } oc3PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { oc3PortConfigEntry 1 } oc3LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the OC3 interface See above diagrams for explanations of loops." DEFVAL { noLoop } ::= { oc3PortConfigEntry 2 } oc3TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used." DEFVAL {localTiming } ::= { oc3PortConfigEntry 3 } oc3LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "oc3 line status - 1: oc3NoAlarm: No alarm present 2: oc3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: oc3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: oc3RcvAIS: Receiving AIS failure state 16: oc3XmitAIS: Transmitting AIS failure statue 32: oc3LOF: Receiving LOF failure state 64: oc3LOS: Reveiving LOS failure state 128: oc3LoopbackState: Looping the received signal 256: oc3RcvTestCode: Receiving a Test Pattern 512: oc3OtherFailure: any line status not defined 1024: oc3LCD: Receiving Loss Of Cell Delineation 2048: oc3LRDI: Receiving Line RDI failure state 4096: oc3PRDI: Receiving Path RDI failure state" DEFVAL { 1 } ::= { oc3PortConfigEntry 4 } oc3OutputTransferRate OBJECT-TYPE SYNTAX INTEGER { fullRate(1), halfRate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "User selectable parameter which allows the outgoing rate of the port to be reduced to 50% oc3, halfRate, only on AQueMan." DEFVAL { fullRate } ::= { oc3PortConfigEntry 5 } oc3APSConfiguration OBJECT-TYPE SYNTAX INTEGER { unprotected(1), working (2), protection(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether APS is configured for this port ." DEFVAL { unprotected } ::= { oc3PortConfigEntry 6 } oc3APS OBJECT IDENTIFIER ::= { equipConfig 16 } oc3APSPairConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Oc3APSPairConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { oc3APS 1 } oc3APSPairConfigEntry OBJECT-TYPE SYNTAX Oc3APSPairConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { oc3APSPairId } ::= { oc3APSPairConfigTable 1 } Oc3APSPairConfigEntry ::= SEQUENCE { oc3APSPairId Integer32, oc3APSPairMode INTEGER, oc3APSPairOption INTEGER, oc3APSPairWorkingSFBERThreshold INTEGER, oc3APSPairProtectionSFBERThreshold INTEGER, oc3APSPairWorkingSDBERThreshold INTEGER, oc3APSPairProtectionSDBERThreshold INTEGER, oc3APSPairWTRPeriod INTEGER, oc3APSWorkingSlot Integer32, oc3APSProtectionSlot Integer32, oc3APSActiveSlot Integer32, oc3APSPairStatus INTEGER, oc3APSPairUserCommand INTEGER, oc3APSPairCurrentState INTEGER, oc3APSPairWorkingLineSignalStatus INTEGER, oc3APSPairProtectionLineSignalStatus INTEGER } oc3APSPairId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "APS Pair Port index - SSPP" ::= { oc3APSPairConfigEntry 1 } oc3APSPairMode OBJECT-TYPE SYNTAX INTEGER { unidirectional(1), bidirectional(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote and local pairs have to switch together." DEFVAL { unidirectional } ::= { oc3APSPairConfigEntry 2 } oc3APSPairOption OBJECT-TYPE SYNTAX INTEGER { nonrevertive(1), revertive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Nonrevertive - After a switch to Prot port, even if the working comes up there is no switch to the working port back. Revertive - traffic is switched back to work port after it comes back." DEFVAL { nonrevertive } ::= { oc3APSPairConfigEntry 3 } oc3APSPairWorkingSFBERThreshold OBJECT-TYPE SYNTAX INTEGER { tenToMinus4(1), tenToMinus5(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bits error Rate threshold to declare signal failure" DEFVAL { tenToMinus4 } ::= { oc3APSPairConfigEntry 4 } oc3APSPairProtectionSFBERThreshold OBJECT-TYPE SYNTAX INTEGER { tenToMinus4(1), tenToMinus5(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bits error Rate threshold to declare signal failure" DEFVAL { tenToMinus4 } ::= { oc3APSPairConfigEntry 6 } oc3APSPairWorkingSDBERThreshold OBJECT-TYPE SYNTAX INTEGER { tenToMinus5(1), tenToMinus6(2), tenToMinus7(3), tenToMinus8(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bits error Rate threshold to declare signal degrade" DEFVAL { tenToMinus5 } ::= { oc3APSPairConfigEntry 5 } oc3APSPairProtectionSDBERThreshold OBJECT-TYPE SYNTAX INTEGER { tenToMinus5(1), tenToMinus6(2), tenToMinus7(3), tenToMinus8(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bits error Rate threshold to declare signal degrade" DEFVAL { tenToMinus5 } ::= { oc3APSPairConfigEntry 7 } oc3APSPairWTRPeriod OBJECT-TYPE SYNTAX INTEGER (5..12) MAX-ACCESS read-write STATUS current DESCRIPTION " Duration for Wait To Restore Period between 5 to 12 minutes. Ref: BellCore GR-253-Core, Issue 3, page 200, R5-56." DEFVAL { 5 } ::= { oc3APSPairConfigEntry 8 } oc3APSWorkingSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working slot of APS pair." ::= { oc3APSPairConfigEntry 9 } oc3APSProtectionSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Protection slot of APS pair." ::= { oc3APSPairConfigEntry 10 } oc3APSActiveSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active slot of APS pair." ::= { oc3APSPairConfigEntry 11 } oc3APSPairStatus OBJECT-TYPE SYNTAX INTEGER { noFailure(1), modeMismatch(2), swByteFailure(3), chMismatch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "noFailure : The protection line is not in use. modeMismatch : one end is configured unidirectional and the other is bidirectional (both the ends should be configured in the same mode). Also when one end is configured for 1:1 architechture and the other end indicates it is configured for 1:n architechture.(Bidirectional mode only) swByteFailure: protection switching byte failure - defect declared when invalid / persistantly unacceptable codes are received in the K1 byte. failure declared if defect persists for an extended period. Invalid code is when the incoming K1 byte contains an unused code or a code irrelevant for the specific switching operation.(Only in bi-directional mode) chMismatch : channel mismatch is declared when the channel numbers in the transmitted K1 byte and the received K2 byte do not match for 50 ms.Channel mismatch is monitored only in bidirectional mode." DEFVAL { noFailure } ::= { oc3APSPairConfigEntry 12 } oc3APSPairUserCommand OBJECT-TYPE SYNTAX INTEGER { noAction(1), manualSwitchToWorkingPort(2), manualSwitchToProtectionPort(3), forcedSwitchToWorkingPort(4), forcedSwitchToProtectionPort(5), lockoutProtection(6), clear(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "APS Pair User Command" DEFVAL { noAction } ::= { oc3APSPairConfigEntry 13 } oc3APSPairCurrentState OBJECT-TYPE SYNTAX INTEGER { localprotectDoNotRevert(1), localprotectManualSw(8), localprotectSD(10), localprotectSF(12), localprotectForced(14), localprotectLockOut(15), localworkingDoNotRevert(17), localworkingManualSw(24), localworkingSD(26), localworkingSF(28), localworkingForced(30), remoteprotectDoNotRevert(33), remoteprotectManualSw(40), remoteprotectSD(42), remoteprotectSF(44), remoteprotectForced(46), remoteprotectLockOut(47), noRequest(48), remoteworkingDoNotRevert(49), remoteworkingManualSw(56), remoteworkingSD(58), remoteworkingSF(60), remoteworkingForced(62) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current State of the APS state machine" DEFVAL { noRequest } ::= { oc3APSPairConfigEntry 14 } oc3APSPairWorkingLineSignalStatus OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024), lineLoopBack(2048), protocolFailure(4096), adminOutOfService(8192) } MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Status of the working port (LOS / LOF / LCD / AIS etc.)" ::= { oc3APSPairConfigEntry 15 } oc3APSPairProtectionLineSignalStatus OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024), lineLoopBack(2048), protocolFailure(4096), adminOutOfService(8192) } MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Status of the protection port (LOS / LOF / LCD / AIS etc.)" ::= { oc3APSPairConfigEntry 16 } oc3APSPairStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Oc3APSPairStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a OC3 port" ::= { equipStatistics 8 } oc3APSPairStatsEntry OBJECT-TYPE SYNTAX Oc3APSPairStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the OC3 port statistics table" INDEX { oc3APSPairStatsId } ::= { oc3APSPairStatsTable 1 } Oc3APSPairStatsEntry ::= SEQUENCE { oc3APSPairStatsId Integer32, oc3APSPairWorkingSFDuration Integer32, oc3APSPairWorkingSDDuration Integer32, oc3APSPairProtectionSFDuration Integer32, oc3APSPairProtectionSDDuration Integer32, oc3APSPairTransmitK1K2Bytes OCTET STRING, oc3APSPairReceiveK1K2Bytes OCTET STRING, oc3APSPairSwitchOverCount Integer32 } oc3APSPairStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Working Port ID - Slot/Port (SSPP)" ::= { oc3APSPairStatsEntry 1 } oc3APSPairWorkingSFDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration in seconds for which the Work port has been in Signal Failure state " ::= { oc3APSPairStatsEntry 2 } oc3APSPairWorkingSDDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration in seconds for which the Work port has been in Signal Degradation state " ::= { oc3APSPairStatsEntry 3 } oc3APSPairProtectionSFDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration in seconds for which the Prot port has been in Signal Failure state " ::= { oc3APSPairStatsEntry 4 } oc3APSPairProtectionSDDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration in seconds for which the Prot port has been in Signal Degradation state" ::= { oc3APSPairStatsEntry 5 } oc3APSPairTransmitK1K2Bytes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The k1 / k2 bytes being transmitted by the prot port to the remote port. " ::= { oc3APSPairStatsEntry 6 } oc3APSPairReceiveK1K2Bytes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "k1 / k2 bytes from the received SONET header on the protection port. k1 / k2 are used for the APS communication protocol. " ::= { oc3APSPairStatsEntry 7 } oc3APSPairSwitchOverCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the APS pair has switched over since last configuration." ::= { oc3APSPairStatsEntry 8 } twoWireSourcePortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TwoWireSourcePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 7 } twoWireSourcePortConfigEntry OBJECT-TYPE SYNTAX TwoWireSourcePortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { twoWireSourcePortId } ::= { twoWireSourcePortConfigTable 1 } TwoWireSourcePortConfigEntry ::= SEQUENCE { twoWireSourcePortId Integer32, twoWireSourceLoopDetection INTEGER, twoWireSourceDialMode INTEGER, twoWireSourceLoopBackConfig INTEGER, twoWireSourceLineStatus INTEGER, twoWireSourceSignalingBits INTEGER, twoWireSourceRingCadence INTEGER, twoWireSourceSignalingState INTEGER, twoWireSourceTestMode INTEGER } twoWireSourcePortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { twoWireSourcePortConfigEntry 1 } twoWireSourceLoopDetection OBJECT-TYPE SYNTAX INTEGER { loopStart(1), groundStart(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects terminal equipment loop circuit detection mode." DEFVAL { loopStart } ::= { twoWireSourcePortConfigEntry 2 } twoWireSourceDialMode OBJECT-TYPE SYNTAX INTEGER { dtmf(1), dialPulse(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field configures twoWireSource card to support communication terminal equipment." DEFVAL { dtmf } ::= { twoWireSourcePortConfigEntry 3 } twoWireSourceLoopBackConfig OBJECT-TYPE SYNTAX INTEGER { noLoopback(1), facilityLoopback(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Configuration of 2W Source LoopBack." DEFVAL { noLoopback } ::= { twoWireSourcePortConfigEntry 4 } twoWireSourceLineStatus OBJECT-TYPE SYNTAX INTEGER (1..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "twoWireSource line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure " DEFVAL { 1 } ::= { twoWireSourcePortConfigEntry 5 } twoWireSourceSignalingBits OBJECT-TYPE SYNTAX INTEGER { ab(1), abcd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects the signaling bits as seen in DS1 signal, ab or abcd." DEFVAL { ab } ::= { twoWireSourcePortConfigEntry 6 } twoWireSourceRingCadence OBJECT-TYPE SYNTAX INTEGER { oneOnThreeOff(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects ring On/Off pattern." DEFVAL { oneOnThreeOff } ::= { twoWireSourcePortConfigEntry 7 } twoWireSourceSignalingState OBJECT-TYPE SYNTAX INTEGER { idle(1), dtmf(2), ringBack(3), connect(4), onHook(5), ringTrip(6), nearEndDisconnect(7), farEndDisconnect(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field reflects the current signaling state." DEFVAL { idle } ::= { twoWireSourcePortConfigEntry 8 } twoWireSourceTestMode OBJECT-TYPE SYNTAX INTEGER { off(1), quietTime(2), f-1004Hz(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field selects line test mode. For normal operation, this field should be OFF." DEFVAL { off } ::= { twoWireSourcePortConfigEntry 9 } highSpeedPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HighSpeedPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 8 } highSpeedPortConfigEntry OBJECT-TYPE SYNTAX HighSpeedPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { highSpeedPortId } ::= { highSpeedPortConfigTable 1 } HighSpeedPortConfigEntry ::= SEQUENCE { highSpeedPortId Integer32, highSpeedPortInputRate Integer32, highSpeedPortOutputRate Integer32 } highSpeedPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { highSpeedPortConfigEntry 1 } highSpeedPortInputRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port input rate" ::= { highSpeedPortConfigEntry 2 } highSpeedPortOutputRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Port output rate" ::= { highSpeedPortConfigEntry 3 } dspPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DspPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 9 } dspPortConfigEntry OBJECT-TYPE SYNTAX DspPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { dspPortId } ::= { dspPortConfigTable 1 } DspPortConfigEntry ::= SEQUENCE { dspPortId Integer32 } dspPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "interface index - SSPP" ::= { dspPortConfigEntry 1 } twoWireSinkPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TwoWireSinkPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 10 } twoWireSinkPortConfigEntry OBJECT-TYPE SYNTAX TwoWireSinkPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { twoWireSinkPortId } ::= { twoWireSinkPortConfigTable 1 } TwoWireSinkPortConfigEntry ::= SEQUENCE { twoWireSinkPortId Integer32, twoWireSinkLoopDetection INTEGER, twoWireSinkDialMode INTEGER, twoWireSinkLineStatus INTEGER, twoWireSinkSignalingBits INTEGER, twoWireSinkSignalingState INTEGER, twoWireSinkTestMode INTEGER } twoWireSinkPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { twoWireSinkPortConfigEntry 1 } twoWireSinkLoopDetection OBJECT-TYPE SYNTAX INTEGER { loopStart(1), groundStart(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Types of loop detection. " DEFVAL { loopStart } ::= { twoWireSinkPortConfigEntry 2 } twoWireSinkDialMode OBJECT-TYPE SYNTAX INTEGER { dtmf(1), dialPulse(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects subscribed dial mode." DEFVAL { dtmf } ::= { twoWireSinkPortConfigEntry 3 } twoWireSinkLineStatus OBJECT-TYPE SYNTAX INTEGER (1..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "twoWireSink line status: 1: NoAlarm: No alarm present 2: SignalingFailureState 4: FacilityLoopBack 8: Maintenance 16: Out Of Service 32: OtherFailure " DEFVAL { 1 } ::= { twoWireSinkPortConfigEntry 4 } twoWireSinkSignalingBits OBJECT-TYPE SYNTAX INTEGER { ab(1), abcd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects the signaling bits as seen in DS1 signal, ab or abcd." DEFVAL { ab } ::= { twoWireSinkPortConfigEntry 5 } twoWireSinkSignalingState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), onHook(3), ringTrip(4), nearEndDisconnect(5), farEndDisconnect(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field reflects the current signaling state." DEFVAL { idle } ::= { twoWireSinkPortConfigEntry 6 } twoWireSinkTestMode OBJECT-TYPE SYNTAX INTEGER { off(1), quietTime(2), f-1004Hz(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field selects line test mode. For normal operation, this field should be OFF." DEFVAL { off } ::= { twoWireSinkPortConfigEntry 7 } e3PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF E3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of e3 specific port attributes" ::= { equipConfig 11 } e3PortConfigEntry OBJECT-TYPE SYNTAX E3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for e3 specific port attributes" INDEX { e3PortId } ::= { e3PortConfigTable 1 } E3PortConfigEntry ::= SEQUENCE { e3PortId Integer32, e3LineType INTEGER, e3LineCoding INTEGER, e3LoopbackConfig INTEGER, e3TransmitClockSource INTEGER, e3LineStatus INTEGER, e3LineBuildOut INTEGER, e3LineScramble INTEGER, e3CellMapping INTEGER } e3PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "slot/port: SSPP" ::= { e3PortConfigEntry 1 } e3LineType OBJECT-TYPE SYNTAX INTEGER { g832(1), g751(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the basic frame structure supported in this E3 port. The rate of E3 is 34.368 Mbps. TITLE: SPECIFICATION: G.832 ITU-T G.832 1993. G.751 ITU-T G.751 1998" DEFVAL { g832 } ::= { e3PortConfigEntry 2 } e3LineCoding OBJECT-TYPE SYNTAX INTEGER { hdb3(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The line code supported for the E3 port. The High Density Bipolar of order 3 (hdb3) as specified in section 8.1 of ITU-T G.703." DEFVAL { hdb3 } ::= { e3PortConfigEntry 3 } e3LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the E3 interface. See above diagrams for explanations of loops." DEFVAL { noLoop } ::= { e3PortConfigEntry 4 } e3TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), adaptiveTiming(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'adaptiveTiming' indicates that the adaptive clocking mechanism is used." DEFVAL { localTiming } ::= { e3PortConfigEntry 5 } e3LineStatus OBJECT-TYPE SYNTAX INTEGER (1..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "e3 line status: 1: e3NoAlarm: No alarm present 2: e3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: e3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: e3RcvAIS: Receiving AIS failure state 16: e3XmitAIS: Transmitting AIS failure statue 32: e3LOF: Receiving LOF failure state 64: e3LOS: Reveiving LOS failure state 128: e3LoopbackState: Looping the received signal 256: e3RcvTestCode: Receiving a Test Pattern 512: e3OtherFailure: any line status not defined " DEFVAL { 1 } ::= { e3PortConfigEntry 6 } e3LineBuildOut OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "e3 line build out" DEFVAL { long } ::= { e3PortConfigEntry 7 } e3LineScramble OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "e3 line scramble" DEFVAL { enabled } ::= { e3PortConfigEntry 8 } e3CellMapping OBJECT-TYPE SYNTAX INTEGER { directMapping(1), plcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "e3 cell mapping method" DEFVAL { directMapping } ::= { e3PortConfigEntry 9 } e1PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF E1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of e1 specific port attributes" ::= { equipConfig 12 } e1PortConfigEntry OBJECT-TYPE SYNTAX E1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for e1 specific port attributes" INDEX { e1PortId } ::= { e1PortConfigTable 1 } E1PortConfigEntry ::= SEQUENCE { e1PortId Integer32, e1Channelization INTEGER, e1LineType INTEGER, e1LineCoding INTEGER, e1LoopbackConfig INTEGER, e1TransmitClockSource INTEGER, e1LineNationalBits INTEGER, e1LineStatus INTEGER, e1TS16 INTEGER, e1DataTransferType INTEGER, e1CRC4 INTEGER, e1OamInterworkingType INTEGER, e1EnhanceFeatureSet1 INTEGER , e1ConnGatewayFeature INTEGER } e1PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - slot/port: SSPP" ::= { e1PortConfigEntry 1 } e1Channelization OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "e1 interface type" DEFVAL { disabled } ::= { e1PortConfigEntry 2 } e1LineType OBJECT-TYPE SYNTAX INTEGER { crc-mf(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "E1 interface type. The rate of E1 is 2.048 Mbps" DEFVAL { crc-mf } ::= { e1PortConfigEntry 3 } e1LineCoding OBJECT-TYPE SYNTAX INTEGER { hdb3(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "e1 interface type" DEFVAL { hdb3 } ::= { e1PortConfigEntry 4 } e1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the e1 interface See above diagrams for explanations of loops." DEFVAL { noLoop } ::= { e1PortConfigEntry 5 } e1TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), adaptive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "e1 timing source" DEFVAL { localTiming } ::= { e1PortConfigEntry 6 } e1LineNationalBits OBJECT-TYPE SYNTAX INTEGER { b00000(1), b00001(2), b00010(3), b00011(4), b00100(5), b00101(6), b00110(7), b00111(8), b01000(9), b01001(10), b01010(11), b01011(12), b01100(13), b01101(14), b01110(15), b01111(16), b10000(17), b10001(18), b10010(19), b10011(20), b10100(21), b10101(22), b10110(23), b10111(24), b11000(25), b11001(26), b11010(27), b11011(28), b11100(29), b11101(30), b11110(31), b11111(32) } MAX-ACCESS read-write STATUS current DESCRIPTION "e1 line country specific code" ::= { e1PortConfigEntry 7 } e1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. e1NoAlarm should be set if and only if no other flag is set. If the e1LoopbackState bit is set, the loopback in effect can be determined from the e1LoopbackConfig object. The various bit positions are: 1: e1NoAlarm: No Alarm Present 2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: e1XmtFarEndLOF: Near end sending LOF Indication 8: e1RcvAIS: Far end sending AIS 16: e1XmtAIS: Near end sending AIS 32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: e1LossOfSignal: Near end Loss Of Signal 128: e1LoopbackState: Near end is looped 256: e1T16AIS: E1 TS16 AIS 512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: e1RcvTestCode: Near End detects a test code 4096: e1OtherFailure: any line status not defined here" DEFVAL { 1 } ::= { e1PortConfigEntry 8 } e1TS16 OBJECT-TYPE SYNTAX INTEGER { cas(1), ccs(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time slot 16 is configurable for channel associated signaling (CAS) or data. cas: 'ABCD' signaling will be extracted in time slot 16 if channel is configured for circuit emulation. ccs: time slot 16 will not carry any e1 channel signaling information, instead, it will be used for data." DEFVAL { ccs } ::= { e1PortConfigEntry 10 } e1DataTransferType OBJECT-TYPE SYNTAX INTEGER { structured(1), unstructured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "E1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit into the AAL1 for data tranfer, whereas, the structured CE packets the entire E1 frame except the Frame alignment signal channel." DEFVAL { structured } ::= { e1PortConfigEntry 11 } e1CRC4 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable transmission of CRC4 bits on bit 1 of each frame." DEFVAL { enabled } ::= { e1PortConfigEntry 12 } e1OamInterworkingType OBJECT-TYPE SYNTAX INTEGER { trunkCond(1), unframed1s(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the interworking is done by trunk conditioning or unframed1s" DEFVAL {trunkCond } ::= {e1PortConfigEntry 13 } e1EnhanceFeatureSet1 OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be configured under the scheme." DEFVAL { disabled } ::= {e1PortConfigEntry 14 } e1ConnGatewayFeature OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable/disable connection gateway (Sapphire) API." DEFVAL { disabled } ::= { e1PortConfigEntry 15 } ethernetPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EthernetPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 13 } ethernetPortConfigEntry OBJECT-TYPE SYNTAX EthernetPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { ethernetPortId } ::= { ethernetPortConfigTable 1 } EthernetPortConfigEntry ::= SEQUENCE { ethernetPortId Integer32, ethernetLinkType INTEGER, ethernetPhysicalAddr OCTET STRING, ethernetLineStatus INTEGER, ethernetDuplexMode INTEGER } ethernetPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPP" ::= { ethernetPortConfigEntry 1 } ethernetLinkType OBJECT-TYPE SYNTAX INTEGER { l-10BaseT(1), l-100BaseT(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of port can either be set to 10baseT or 100baseT for the first port on the ethernet card. The other ports can only be set to 10baseT. The Auto mode will detect what LAN speed the port is connected to." DEFVAL { l-10BaseT } ::= { ethernetPortConfigEntry 2 } ethernetPhysicalAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dSprPriority a unique Bridgeidentifier is formed which is used in the Spanning Tree Protocol." REFERENCE "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" ::= { ethernetPortConfigEntry 3 } ethernetLineStatus OBJECT-TYPE SYNTAX INTEGER (1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "ethernet line status: 1: Down 2: 10baseT-FullDuplex 4: 10baseT-HalfDuplex 8: 100baseT-FullDuplex 16: 100baseT-HalfDuplex " DEFVAL { 1 } ::= { ethernetPortConfigEntry 4 } ethernetDuplexMode OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the port to either be in full or half duplex. You can also set the port to auto detect the mode it is connected to." DEFVAL { full } ::= { ethernetPortConfigEntry 5 } dsp2PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsp2PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 14 } dsp2PortConfigEntry OBJECT-TYPE SYNTAX Dsp2PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { dsp2PortId } ::= { dsp2PortConfigTable 1 } Dsp2PortConfigEntry ::= SEQUENCE { dsp2PortId Integer32 } dsp2PortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "interface index - SSPP" ::= { dsp2PortConfigEntry 1 } imaPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ImaPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used for the IMA virtual port on cards that have physical interfaces configured as atmIma. Corresponds to port 7 on DS1 and E1." ::= { equipConfig 15 } imaPortConfigEntry OBJECT-TYPE SYNTAX ImaPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ima specific port attributes" INDEX { imaPortId } ::= { imaPortConfigTable 1 } ImaPortConfigEntry ::= SEQUENCE { imaPortId Integer32 } imaPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "interface index - slot/port: SSPP" ::= { imaPortConfigEntry 1 } -- -- STS1 Port Config Table -- sts1PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Sts1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of sts-1 specific port attributes" ::= { equipConfig 17 } sts1PortConfigEntry OBJECT-TYPE SYNTAX Sts1PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for sts-1 specific port attributes" INDEX { sts1PortId } ::= { sts1PortConfigTable 1 } Sts1PortConfigEntry ::= SEQUENCE { sts1PortId IntfIndex, sts1LineCoding INTEGER, sts1LoopbackConfig INTEGER, sts1TransmitClockSource INTEGER, sts1LineBuildOut INTEGER, sts1LineStatus INTEGER, sts1StsPointers INTEGER, sts1VtPointers INTEGER } sts1PortId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "slot/port: SSPP" ::= { sts1PortConfigEntry 1 } sts1LineCoding OBJECT-TYPE SYNTAX INTEGER { b3zs(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length." DEFVAL { b3zs } ::= { sts1PortConfigEntry 2 } sts1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(1), localLoop(2), lineLoop(3), payloadLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the loopback configuration of the sts-1 interface. See above diagrams for explanations of loops." DEFVAL { noLoop } ::= { sts1PortConfigEntry 3 } sts1TransmitClockSource OBJECT-TYPE SYNTAX INTEGER { loopTiming(1), localTiming(2), cardFreeRun(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'cardFreeRun' indicates that a local oscillator on the I/O card is used as the transmit clock." DEFVAL { localTiming } ::= { sts1PortConfigEntry 4 } sts1LineBuildOut OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sts-1 line build out" DEFVAL { short } ::= { sts1PortConfigEntry 5 } sts1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "sts-1 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback" DEFVAL { 1 } ::= { sts1PortConfigEntry 6 } sts1StsPointers OBJECT-TYPE SYNTAX INTEGER { locked(1), floating(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "status of the sts-1 sts pointers" DEFVAL { locked } ::= { sts1PortConfigEntry 7 } sts1VtPointers OBJECT-TYPE SYNTAX INTEGER { locked(1), floating(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "status of the sts-1 vt pointers" DEFVAL { locked } ::= { sts1PortConfigEntry 8 } -- Port Configuration for the tasm tasmPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TasmPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { equipConfig 18 } tasmPortConfigEntry OBJECT-TYPE SYNTAX TasmPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { tasmPortId } ::= { tasmPortConfigTable 1 } TasmPortConfigEntry ::= SEQUENCE { tasmPortId Integer32 } tasmPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "interface index - SSPP" ::= { tasmPortConfigEntry 1 } protectionGroupConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtectionGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives the list of Slot Protection Groups in the System. Slot protection group in one in which there are n cards being protected by 1 standby card." ::= { equipConfig 19 } protectionGroupConfigEntry OBJECT-TYPE SYNTAX ProtectionGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row Definition for the Protection Group Tables" INDEX { protectionSlotId } ::= { protectionGroupConfigTable 1 } ProtectionGroupConfigEntry ::= SEQUENCE { protectionSlotId INTEGER, workingSlotBitmap INTEGER, protectionCommand INTEGER, protectionCommandSlotId INTEGER, protectionGroupStatus INTEGER, workingSlotId INTEGER, workingFailedBitmap INTEGER, protectionActiveCounter Integer32, protectionOOSCounter Integer32 } protectionSlotId OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Protection Group Index. Index is the slot id of the Slot Configured as Protection." ::= { protectionGroupConfigEntry 1 } workingSlotBitmap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Working Slot Bitmap which the protection slot will monitor" DEFVAL { 0 } ::= { protectionGroupConfigEntry 2 } protectionCommand OBJECT-TYPE SYNTAX INTEGER { clear(1), forcedSwitchOverToProtection(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "List of commands which can be executed on a protection Group. Clear : This command is used to clear any previous commands which may have been and get back to normal nto1 operation Forced SwitchOver To Protection : Switchover to Protection card even if the working card is in service active These commands to used in conjunction with the working slot id." DEFVAL { clear } ::= { protectionGroupConfigEntry 3 } protectionCommandSlotId OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the working Slot to which command has to be applied" DEFVAL { 0 } ::= { protectionGroupConfigEntry 4} protectionGroupStatus OBJECT-TYPE SYNTAX INTEGER { none(1), inservice-Active(2), inservice-Standby(3), outOfService-Active(4), outOfService-Standby(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Protection Status of a Protection Card. Inservice and OutofService indicates if the card has failed or still operational. Active or Standby state indicates if it is carrying active traffic or not." DEFVAL { none } ::= { protectionGroupConfigEntry 5 } workingSlotId OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "If protection group status is active, this field will give the slot which is being working. In case it is in standby mode this field will show 0" DEFVAL { 0 } ::= { protectionGroupConfigEntry 6 } workingFailedBitmap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Gives Bitmap of the Failed Working Slots. Subset of the Working Slot Bitmap." DEFVAL { 0 } ::= { protectionGroupConfigEntry 7 } protectionActiveCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Give the Number of Times a Protection has gone to active." ::= { protectionGroupConfigEntry 8 } protectionOOSCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Give the Number of Times a Protection Card has failed." ::= { protectionGroupConfigEntry 9 } -- The Channel Configuration Group taxiChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TaxiChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 1 } taxiChannelConfigEntry OBJECT-TYPE SYNTAX TaxiChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { taxiChannelId } ::= { taxiChannelConfigTable 1 } TaxiChannelConfigEntry ::= SEQUENCE { taxiChannelId IntfIndex, taxiChannelIfType INTEGER, taxiChannelSecuFeature INTEGER } taxiChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { taxiChannelConfigEntry 1 } taxiChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmUni4-0(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " UNI or NNI type" DEFVAL { unconfigured } ::= { taxiChannelConfigEntry 2 } taxiChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " enhancement feature" DEFVAL { unsecurable } ::= { taxiChannelConfigEntry 3 } ds3ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical channel attributes" ::= { channelConfig 2 } ds3ChannelConfigEntry OBJECT-TYPE SYNTAX Ds3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical channel attributes" INDEX { ds3ChannelId } ::= { ds3ChannelConfigTable 1 } Ds3ChannelConfigEntry ::= SEQUENCE { ds3ChannelId IntfIndex, ds3ChannelIfType INTEGER, ds3ChannelSecuFeature INTEGER } ds3ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { ds3ChannelConfigEntry 1 } ds3ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), frameRelayUni(6), frameRelayNni(7), atmPnni1-0(8), atmUni4-0(9), circuitEmulation(10) } MAX-ACCESS read-write STATUS current DESCRIPTION " UNI or NNI type," DEFVAL { unconfigured } ::= { ds3ChannelConfigEntry 2 } ds3ChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Interface type configured on DS3 channel " DEFVAL { unsecurable } ::= { ds3ChannelConfigEntry 3 } ds1ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds1ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 3 } ds1ChannelConfigEntry OBJECT-TYPE SYNTAX Ds1ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { ds1ChannelId } ::= { ds1ChannelConfigTable 1 } Ds1ChannelConfigEntry ::= SEQUENCE { ds1ChannelId IntfIndex, ds1ChannelIfType INTEGER, ds1ChannelDs0Map OCTET STRING, ds1ChannelCellMapping INTEGER, ds1ChannelInputCodingRule INTEGER, ds1ChannelSecuFeature INTEGER, ds1ChannelSignaling INTEGER, ds1ChannelCellScramble INTEGER } ds1ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { ds1ChannelConfigEntry 1 } ds1ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), frameRelayUni(7), hdlcPassThrough(8), pri-isdn-network(9), dbCirEm(10), frameRelayNni(11), pri-isdn-user(12), atmIma(13), atmPnni1-0(14), casTrunkLine(15), atmUni4-0(16), gr303 (17) } MAX-ACCESS read-write STATUS current DESCRIPTION "UNI or NNI type for ATM ,Frame Relay, or ISDN service interface type for channel" DEFVAL { unconfigured } ::= { ds1ChannelConfigEntry 2 } ds1ChannelDs0Map OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) MAX-ACCESS read-write STATUS current DESCRIPTION "bit map of DS0 in channel" ::= { ds1ChannelConfigEntry 3 } ds1ChannelCellMapping OBJECT-TYPE SYNTAX INTEGER { directMapping(1), none(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "cell delineation mode for ATM cell bearing services" DEFVAL { directMapping } ::= { ds1ChannelConfigEntry 4 } ds1ChannelInputCodingRule OBJECT-TYPE SYNTAX INTEGER { none(1), muLawPCM(2), aLawPCM(3), digital(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "enhancement feature" DEFVAL { none } ::= { ds1ChannelConfigEntry 5 } ds1ChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "enhancement feature" DEFVAL { unsecurable } ::= { ds1ChannelConfigEntry 6 } ds1ChannelSignaling OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "refers to robbed-bit signaling in circuitEmulation interfaces." DEFVAL { disabled } ::= { ds1ChannelConfigEntry 7 } ds1ChannelCellScramble OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "refers to enabling/disabling cell scrambling on ATM interface." DEFVAL { disabled } ::= { ds1ChannelConfigEntry 8 } msChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MsChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel configuration table for multi-serial ports." ::= { channelConfig 4 } msChannelConfigEntry OBJECT-TYPE SYNTAX MsChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for multi-serial channel config. " INDEX { msChannelId } ::= { msChannelConfigTable 1 } MsChannelConfigEntry ::= SEQUENCE { msChannelId IntfIndex, msChannelIfType INTEGER, msChannelCellBearingMode INTEGER, msChannelCellBearingAddrMode INTEGER, msChannelCellBearingPayloadFec INTEGER, msChannelSecuFeature INTEGER } msChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { msChannelConfigEntry 1 } msChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), terminalEmulation(7), frameRelayUni(8), hdlcPassThrough(9), frameRelayNni(10), atmPnni1-0(11), atmUni4-0(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "interface type for multi-serial port" DEFVAL { unconfigured } ::= { msChannelConfigEntry 2 } msChannelCellBearingMode OBJECT-TYPE SYNTAX INTEGER { lanet(1), ccittDirectMapping(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The cell delineation mode is either LANET or CCITT based" DEFVAL { lanet } ::= { msChannelConfigEntry 3 } msChannelCellBearingAddrMode OBJECT-TYPE SYNTAX INTEGER { standard(1), noiseTolerant(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "standard - ATM Forum UNI 3.0/3.1 noiseTolerant - A proprietary noise tolerant address mapping scheme" DEFVAL { standard } ::= { msChannelConfigEntry 4 } msChannelCellBearingPayloadFec OBJECT-TYPE SYNTAX INTEGER { dynamic(1), threeEighthsRate(2), oneQuarterRate(3), oneEighthRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "payload error correction scheme" DEFVAL { dynamic } ::= { msChannelConfigEntry 5 } msChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "enhancement feature" DEFVAL { unsecurable } ::= { msChannelConfigEntry 6 } oc3ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Oc3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 5 } oc3ChannelConfigEntry OBJECT-TYPE SYNTAX Oc3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { oc3ChannelId } ::= { oc3ChannelConfigTable 1 } Oc3ChannelConfigEntry ::= SEQUENCE { oc3ChannelId IntfIndex, oc3ChannelIfType INTEGER, oc3ChannelSecuFeature INTEGER } oc3ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { oc3ChannelConfigEntry 1 } oc3ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7) ,atmVnnUni3-1(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " UNI or NNI type" DEFVAL { unconfigured } ::= { oc3ChannelConfigEntry 2 } oc3ChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " enhancement feature" DEFVAL { unsecurable } ::= { oc3ChannelConfigEntry 3 } twoWireSourceChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TwoWireSourceChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 6 } twoWireSourceChannelConfigEntry OBJECT-TYPE SYNTAX TwoWireSourceChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { twoWireSourceChannelId } ::= { twoWireSourceChannelConfigTable 1 } TwoWireSourceChannelConfigEntry ::= SEQUENCE { twoWireSourceChannelId IntfIndex, twoWireSourceChannelIfType INTEGER, twoWireSourceChannelConnectionType INTEGER, twoWireSourceChannelCompandingLaw INTEGER, twoWireSourceChannelSecuFeature INTEGER, twoWireSourceChannelVoiceCompression INTEGER, twoWireSourceChannelEchoCancellation INTEGER, twoWireSourceChannelSilenceSupression INTEGER, twoWireSourceChannelEncapsulationAal INTEGER, twoWireSourceChannelSubscriberService INTEGER } twoWireSourceChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { twoWireSourceChannelConfigEntry 1 } twoWireSourceChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), circuitEmulation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Interface types of 2W station(source) channel. " DEFVAL { unconfigured } ::= { twoWireSourceChannelConfigEntry 2 } twoWireSourceChannelConnectionType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field selects ATM virtual circuit connection type, PVC or SVC." DEFVAL { pvc } ::= { twoWireSourceChannelConfigEntry 3 } twoWireSourceChannelCompandingLaw OBJECT-TYPE SYNTAX INTEGER { muLawPCM(1), aLawPCM(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects channel encoding/decoding quantization interval, muLaw or aLaw." DEFVAL { muLawPCM } ::= { twoWireSourceChannelConfigEntry 4 } twoWireSourceChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "enhancement feature" DEFVAL { unsecurable } ::= { twoWireSourceChannelConfigEntry 5 } twoWireSourceChannelVoiceCompression OBJECT-TYPE SYNTAX INTEGER { disabled(1), adpcm32k(2), adpcm16k(3), adpcm8k(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "voice compression scheme" DEFVAL { disabled } ::= { twoWireSourceChannelConfigEntry 6 } twoWireSourceChannelEchoCancellation OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field disables/enables twoWireSource card echo cancellation function." DEFVAL { disabled } ::= { twoWireSourceChannelConfigEntry 7 } twoWireSourceChannelSilenceSupression OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field disables/enables twoWireSource card silence suppression." DEFVAL { disabled } ::= { twoWireSourceChannelConfigEntry 8 } twoWireSourceChannelEncapsulationAal OBJECT-TYPE SYNTAX INTEGER { aal1(1), lucent(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data." DEFVAL { aal1 } ::= { twoWireSourceChannelConfigEntry 9 } twoWireSourceChannelSubscriberService OBJECT-TYPE SYNTAX INTEGER { plar(1), fxs(2), s-signaling(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field selects subscribed channel service types. plar - Private Line Automatic Ring fxs - Foreign Exchange Subscriber End s-signaling - A proprietary specific signaling type based on AIN model." DEFVAL { plar } ::= { twoWireSourceChannelConfigEntry 10 } highSpeedChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HighSpeedChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 7 } highSpeedChannelConfigEntry OBJECT-TYPE SYNTAX HighSpeedChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { highSpeedChannelId } ::= { highSpeedChannelConfigTable 1 } HighSpeedChannelConfigEntry ::= SEQUENCE { highSpeedChannelId IntfIndex, highSpeedChannelIfType INTEGER } highSpeedChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { highSpeedChannelConfigEntry 1 } highSpeedChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), atmUni4-0(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " UNI or NNI type" DEFVAL { unconfigured } ::= { highSpeedChannelConfigEntry 2 } dspChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DspChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 8 } dspChannelConfigEntry OBJECT-TYPE SYNTAX DspChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { dspChannelId } ::= { dspChannelConfigTable 1 } DspChannelConfigEntry ::= SEQUENCE { dspChannelId IntfIndex, dspChannelIfType INTEGER, dspChannelInputCodingRule INTEGER, dspChannelVoiceCompression INTEGER, dspChannelEchoCancellation INTEGER, dspChannelSilenceSupression INTEGER } dspChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { dspChannelConfigEntry 1 } dspChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), dsp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Interface Type" DEFVAL { unconfigured } ::= { dspChannelConfigEntry 2 } dspChannelInputCodingRule OBJECT-TYPE SYNTAX INTEGER { muLawPCM(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Input Coding Rule " DEFVAL { muLawPCM } ::= { dspChannelConfigEntry 3 } dspChannelVoiceCompression OBJECT-TYPE SYNTAX INTEGER { adpcm32k(1), adpcm16k(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "voice compression scheme" DEFVAL { adpcm32k } ::= { dspChannelConfigEntry 4 } dspChannelEchoCancellation OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "voice compression scheme" DEFVAL { enabled } ::= { dspChannelConfigEntry 5 } dspChannelSilenceSupression OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "voice compression scheme" DEFVAL { enabled } ::= { dspChannelConfigEntry 6 } twoWireSinkChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TwoWireSinkChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 9 } twoWireSinkChannelConfigEntry OBJECT-TYPE SYNTAX TwoWireSinkChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { twoWireSinkChannelId } ::= { twoWireSinkChannelConfigTable 1 } TwoWireSinkChannelConfigEntry ::= SEQUENCE { twoWireSinkChannelId IntfIndex, twoWireSinkChannelIfType INTEGER, twoWireSinkChannelConnectionType INTEGER, twoWireSinkChannelCompandingLaw INTEGER, twoWireSinkChannelVoiceCompression INTEGER, twoWireSinkChannelEchoCancellation INTEGER, twoWireSinkChannelSilenceSupression INTEGER, twoWireSinkChannelEncapsulationAal INTEGER, twoWireSinkChannelSubscriberService INTEGER } twoWireSinkChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { twoWireSinkChannelConfigEntry 1 } twoWireSinkChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), circuitEmulation(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Interface types. " DEFVAL { unconfigured } ::= { twoWireSinkChannelConfigEntry 2 } twoWireSinkChannelConnectionType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects ATM virtual circuit connection type, PVC or SVC." DEFVAL { pvc } ::= { twoWireSinkChannelConfigEntry 3 } twoWireSinkChannelCompandingLaw OBJECT-TYPE SYNTAX INTEGER { muLawPCM(1), aLawPCM(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects channel encoding/decoding quantization interval, muLaw or aLaw." DEFVAL { muLawPCM } ::= { twoWireSinkChannelConfigEntry 4 } twoWireSinkChannelVoiceCompression OBJECT-TYPE SYNTAX INTEGER { disabled(1), adpcm32k(2), adpcm16k(3), adpcm8k(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "voice compression scheme" DEFVAL { disabled } ::= { twoWireSinkChannelConfigEntry 5 } twoWireSinkChannelEchoCancellation OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field disables/enables twoWireSink card echo cancellation function." DEFVAL { disabled } ::= { twoWireSinkChannelConfigEntry 6 } twoWireSinkChannelSilenceSupression OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field disables/enables twoWireSink card silence suppression." DEFVAL { disabled } ::= { twoWireSinkChannelConfigEntry 7 } twoWireSinkChannelEncapsulationAal OBJECT-TYPE SYNTAX INTEGER { aal1(1), lucent(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field selects ATM cell payload format. Aal1 - ATM Adaption Layer Type 1. Yurie - A proprietary specific ATM cell payload format for compressed data." DEFVAL { aal1 } ::= { twoWireSinkChannelConfigEntry 8 } twoWireSinkChannelSubscriberService OBJECT-TYPE SYNTAX INTEGER { fxo(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The only available service type for twoWireSink card is Foreign Exchange Office End (fxo)." DEFVAL { fxo } ::= { twoWireSinkChannelConfigEntry 9 } e3ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF E3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical channel attributes" ::= { channelConfig 10 } e3ChannelConfigEntry OBJECT-TYPE SYNTAX E3ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical channel attributes" INDEX { e3ChannelId } ::= { e3ChannelConfigTable 1 } E3ChannelConfigEntry ::= SEQUENCE { e3ChannelId IntfIndex, e3ChannelIfType INTEGER, e3ChannelSecuFeature INTEGER } e3ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { e3ChannelConfigEntry 1 } e3ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7), circuitEmulation(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " Interface type configured on E3 channel " DEFVAL { unconfigured } ::= { e3ChannelConfigEntry 2 } e3ChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " enhancement feature" DEFVAL { unsecurable } ::= { e3ChannelConfigEntry 3 } e1ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF E1ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Port attributes" ::= { channelConfig 11 } e1ChannelConfigEntry OBJECT-TYPE SYNTAX E1ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { e1ChannelId } ::= { e1ChannelConfigTable 1 } E1ChannelConfigEntry ::= SEQUENCE { e1ChannelId IntfIndex, e1ChannelIfType INTEGER, e1ChannelDs0Map OCTET STRING, e1ChannelCellMapping INTEGER, e1ChannelInputCodingRule INTEGER, e1ChannelSecuFeature INTEGER , e1ChannelSignaling INTEGER } e1ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { e1ChannelConfigEntry 1 } e1ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), circuitEmulation(6), frameRelayUni(7), hdlcPassThrough(8), frameRelayNni(9), atmIma(10), atmPnni1-0(11), pri-isdn-network(12), pri-isdn-user(13), casTrunkLine(14), atmUni4-0(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "UNI or NNI type for ATM ,Frame Relay, or ISDN serviceinterface type for channel" DEFVAL { unconfigured } ::= { e1ChannelConfigEntry 2 } e1ChannelDs0Map OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "bit map of DS0 in channel" ::= { e1ChannelConfigEntry 3 } e1ChannelCellMapping OBJECT-TYPE SYNTAX INTEGER { directMapping(1), none(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "cell delineation mode for ATM cell bearing services" DEFVAL { directMapping } ::= { e1ChannelConfigEntry 4 } e1ChannelInputCodingRule OBJECT-TYPE SYNTAX INTEGER { none(1), muLawPCM(2), aLawPCM(3), digital(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "enhancement feature" DEFVAL { none } ::= { e1ChannelConfigEntry 5 } e1ChannelSecuFeature OBJECT-TYPE SYNTAX INTEGER { unsecurable(1), secured(2), securable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "enhancement feature" DEFVAL { unsecurable } ::= { e1ChannelConfigEntry 6 } e1ChannelSignaling OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Refers to robbed-bit singaling in circuitEmulation interface." DEFVAL { disabled } ::= { e1ChannelConfigEntry 7 } ethernetChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EthernetChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used for enthernet channel configuration." ::= { channelConfig 12 } ethernetChannelConfigEntry OBJECT-TYPE SYNTAX EthernetChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for enthernet channel attributes. " INDEX { ethernetChannelId } ::= { ethernetChannelConfigTable 1 } EthernetChannelConfigEntry ::= SEQUENCE { ethernetChannelId Integer32, ethernetChannelIfType INTEGER } ethernetChannelId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index" ::= { ethernetChannelConfigEntry 1 } ethernetChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), bridge(2), routing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Types of ethernet interface. There are two types of bridging interface(channel):bridge and routing. " DEFVAL { unconfigured } ::= { ethernetChannelConfigEntry 2 } dsp2Channel OBJECT IDENTIFIER ::= { channelConfig 13 } dsp2ChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsp2ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Channel attributes" ::= { dsp2Channel 1 } dsp2ChannelConfigEntry OBJECT-TYPE SYNTAX Dsp2ChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { dsp2ChannelId } ::= { dsp2ChannelConfigTable 1 } Dsp2ChannelConfigEntry ::= SEQUENCE { dsp2ChannelId IntfIndex, dsp2ChannelIfType INTEGER, dsp2ChannelAlarmType INTEGER, dsp2ChannelModeConfig INTEGER } dsp2ChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { dsp2ChannelConfigEntry 1 } dsp2ChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), dsp2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Interface Type" DEFVAL { unconfigured } ::= { dsp2ChannelConfigEntry 2 } dsp2ChannelAlarmType OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), dspFailure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field is a read only failure which gives the status of a dsp.When the status is dspFailure the Operational Status at the interface level will go OOS" DEFVAL { noAlarm } ::= { dsp2ChannelConfigEntry 3 } dsp2ChannelModeConfig OBJECT-TYPE SYNTAX INTEGER { algoSet1(1), algoSet2(2), algoSet3(3), algoSet4(4), algoSet5(5), algoSet6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to configure the mode of the DSP card. Each mode corresponds to a set of algorithms supported by the IO card. The complete list of enumerations of supported algorithms is given in the dsp2AlgorithmTable. The following description outlines the algorithms supported in each corresponding AlgoSet. algoSet1 : g168-echo-cancellation128ms algoSet2 : g726-voice-compression, g165-echo-cancellation, generic-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet3 : g729a-voice-compression, g165-echo-cancellation, g729b-silence-suppression, fax-modem-tone-detection, g168-echo-cancellation64ms. algoSet4 : v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. algoSet5 : g168-echo-cancellation64ms. algoSet6 : g726-voice-compression, g729a-voice-compression, g729b-silence-suppression, g168-echo-cancellation64ms, v17-fax-algorithm-upto-14400-bps, v29-fax-algorithm-upto-9600-bps, v27ter-fax-algorithm-upto-2400-bps, v21-fax-algorithm-upto-300-bps. " DEFVAL { algoSet2 } ::= { dsp2ChannelConfigEntry 4 } dsp2AlgorithmTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsp2AlgorithmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of dsp2 algorithms assigned to interface." ::= { dsp2Channel 2 } dsp2AlgorithmEntry OBJECT-TYPE SYNTAX Dsp2AlgorithmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for dsp2 algorithms assigned to interfaces." INDEX { dsp2AlgorithmId, dsp2AlgorithmType } ::= { dsp2AlgorithmTable 1 } Dsp2AlgorithmEntry ::= SEQUENCE { dsp2AlgorithmId IntfIndex, dsp2AlgorithmType INTEGER } dsp2AlgorithmId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCC" ::= { dsp2AlgorithmEntry 1 } dsp2AlgorithmType OBJECT-TYPE SYNTAX INTEGER { g726-voice-compression(1), g165-echo-cancellation(2), generic-silence-suppression(3), fax-modem-tone-detection(4), g729a-voice-compression(5), g729b-silence-suppression(6), g168-echo-cancellation64ms(7), g168-echo-cancellation128ms(8), v17-fax-algorithm-upto-14400-bps(9), v29-fax-algorithm-upto-9600-bps(10), v27ter-fax-algorithm-upto-2400-bps(11), v21-fax-algorithm-upto-300-bps(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "DSP Algorithm type." DEFVAL { g726-voice-compression } ::= { dsp2AlgorithmEntry 2 } imaGrpChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ImaGrpChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used for the IMA virtual channel (group) configuration on cards that have physical interfaces configured as atmIma. Represents three channels that can be configured as IMA groups on port 7 of DS1 and E1 cards." ::= { channelConfig 14 } imaGrpChannelConfigEntry OBJECT-TYPE SYNTAX ImaGrpChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical port attributes" INDEX { imaGrpChannelId } ::= { imaGrpChannelConfigTable 1 } ImaGrpChannelConfigEntry ::= SEQUENCE { imaGrpChannelId IntfIndex, imaGrpChannelIfType INTEGER, imaGrpChannelPortMap Integer32, imaGrpChannelNeState ImaGrpChannelEndState, imaGrpChannelFeState ImaGrpChannelEndState, imaGrpChannelFailureStatus INTEGER, imaGrpChannelSymmetry INTEGER, imaGrpChannelMinNumTxLinks INTEGER, imaGrpChannelMinNumRxLinks INTEGER, imaGrpChannelNeTxClkMode INTEGER, imaGrpChannelFeTxClkMode INTEGER, imaGrpChannelTxImaId INTEGER, imaGrpChannelRxImaId INTEGER, imaGrpChannelTxFrameLength INTEGER, imaGrpChannelRxFrameLength INTEGER, imaGrpChannelDiffLinkDelayMax Integer32, imaGrpChannelLeastDelayLink IntfIndex, imaGrpChannelDiffDelayMaxObs Integer32, imaGrpChannelAlphaValue INTEGER, imaGrpChannelBetaValue INTEGER, imaGrpChannelGammaValue INTEGER, imaGrpChannelStatsNeNumFailures Integer32, imaGrpChannelStatsFeNumFailures Integer32, imaGrpChannelStatsNumTxActLnks Integer32, imaGrpChannelStatsNumRxActLnks Integer32, imaGrpChannelStatsTimer Integer32, imaGrpChannelCompatMode INTEGER } imaGrpChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index - SSPPCCC" ::= { imaGrpChannelConfigEntry 1 } imaGrpChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), atmUni3-0(2), atmUni3-1(3), iispUser(4), iispNetwork(5), atmPnni1-0(6), atmUni4-0(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "interface type " DEFVAL { unconfigured } ::= { imaGrpChannelConfigEntry 2 } imaGrpChannelPortMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap that identifies the physical IMA interfaces in this group. The least significant bit represents port 1." ::= { imaGrpChannelConfigEntry 3 } imaGrpChannelNeState OBJECT-TYPE SYNTAX ImaGrpChannelEndState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the near-end IMA Group State Machine." ::= {imaGrpChannelConfigEntry 4 } imaGrpChannelFeState OBJECT-TYPE SYNTAX ImaGrpChannelEndState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the far-end IMA Group State Machine." ::= { imaGrpChannelConfigEntry 5 } imaGrpChannelFailureStatus OBJECT-TYPE SYNTAX INTEGER { noFailure(1), startUpNe(2), startUpFe(3), invalidMValueNe(4), invalidMValueFe(5), failedAssymetricNe(6), failedAssymetricFe(7), insuffLinksNe(8), insuffLinksFe(9), blockedNe(10), blockedFe(11), otherFailure(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current failure status of the IMA group (the reason why the GTSM is in the down state). noFailure(1) no failure startUpNe(2) near-end is in the state of start-up startUpFe(3) far-end is in the state of start-up invalidMValueNe(4) near-end has invalid frame length invalidMValueFe(5) far-end has invalid frame length failedAssymetricNe(6) near-end failed due to incompatable symmetry failedAssymetricFe(7) far-end failed due to incompatable symmetry insuffLinksNe(8) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(9) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(10) Near-end is administratively out-of-service blockedFe(11) Far-end is administratively out-of-service otherFailure(12) other failures" ::= { imaGrpChannelConfigEntry 6 } imaGrpChannelSymmetry OBJECT-TYPE SYNTAX INTEGER { symOperation(1), asymOperation(2), asymConfiguration(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Symmetry of the IMA group. Symmetric configuration: all ports of IMA group are configured as full-duplex. With symmetric configuration, operation is symmetric if no links failes; is asymmetric if a link fails so that the active forward and backward links between far-end and near-end are asymmetric. If the configuration is asymmetric, the operation can never be symmetric." DEFVAL { symOperation } ::= {imaGrpChannelConfigEntry 7 } imaGrpChannelMinNumTxLinks OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of transmit links required to be Active for the IMA group to be in the Up state." ::= { imaGrpChannelConfigEntry 8 } imaGrpChannelMinNumRxLinks OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of receive links required to be Active for the IMA group to be in the Up state." ::= { imaGrpChannelConfigEntry 9 } imaGrpChannelNeTxClkMode OBJECT-TYPE SYNTAX INTEGER { ctc(1), itc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit clocking mode used by the near-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock. The underlying clock configuration must be set up by the user to ensure operation in the selected mode." DEFVAL { ctc } ::= { imaGrpChannelConfigEntry 10 } imaGrpChannelFeTxClkMode OBJECT-TYPE SYNTAX INTEGER { ctc(1), itc(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit clocking mode used by the far-end IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of all IMA links are derived from the same source. The ITC configuration corresponds to the case where there is at least one IMA link whose transmit clock is derived from a source different than at least another link transmit clock." ::= { imaGrpChannelConfigEntry 11 } imaGrpChannelTxImaId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The IMA ID currently in use by the near-end IMA function." ::= {imaGrpChannelConfigEntry 12 } imaGrpChannelRxImaId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IMA ID currently in use by the far-end IMA function." ::= { imaGrpChannelConfigEntry 13 } imaGrpChannelTxFrameLength OBJECT-TYPE SYNTAX INTEGER { m32(32), m64(64), m128(128), m256(256) } MAX-ACCESS read-write STATUS current DESCRIPTION "The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup." DEFVAL { m128 } ::= { imaGrpChannelConfigEntry 14 } imaGrpChannelRxFrameLength OBJECT-TYPE SYNTAX INTEGER { m32(32), m64(64), m128(128), m256(256) } MAX-ACCESS read-only STATUS current DESCRIPTION "Value of IMA frame length as received from remote IMA function." ::= { imaGrpChannelConfigEntry 15 } imaGrpChannelDiffLinkDelayMax OBJECT-TYPE SYNTAX INTEGER (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface." DEFVAL { 25 } ::= { imaGrpChannelConfigEntry 16 } imaGrpChannelLeastDelayLink OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface Index of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has been configured in the IMA group." ::= { imaGrpChannelConfigEntry 17 } imaGrpChannelDiffDelayMaxObs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group." ::= { imaGrpChannelConfigEntry 18 } imaGrpChannelAlphaValue OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state." DEFVAL { 2 } ::= { imaGrpChannelConfigEntry 19 } imaGrpChannelBetaValue OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state." DEFVAL { 2 } ::= { imaGrpChannelConfigEntry 20 } imaGrpChannelGammaValue OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC state." DEFVAL { 1 } ::= { imaGrpChannelConfigEntry 21 } imaGrpChannelStatsNeNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported." ::= { imaGrpChannelConfigEntry 22 } imaGrpChannelStatsFeNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported." ::= { imaGrpChannelConfigEntry 23 } imaGrpChannelStatsNumTxActLnks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links which are configured to transmit and are currently Active in this IMA group." ::= { imaGrpChannelConfigEntry 24 } imaGrpChannelStatsNumRxActLnks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links which are configured to receive and are currently Active in this IMA group." ::= { imaGrpChannelConfigEntry 25 } imaGrpChannelStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Time, in seconds, since last reset." ::= { imaGrpChannelConfigEntry 26 } imaGrpChannelCompatMode OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to indicate interoperability mode to the I/O card in terms of reporting the link status at the correct location in the IMA Control Protocol (ICP) cell" DEFVAL {no} ::= { imaGrpChannelConfigEntry 27 } -- -- Channel Configuration for the new card -- tasmChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TasmChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of common physical Channel attributes" ::= { channelConfig 15 } tasmChannelConfigEntry OBJECT-TYPE SYNTAX TasmChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for common physical channel attributes" INDEX { tasmChannelId } ::= { tasmChannelConfigTable 1 } TasmChannelConfigEntry ::= SEQUENCE { tasmChannelId IntfIndex, tasmChannelIfType INTEGER, tasmChannelAlarmType INTEGER, tasmChannelModeConfig INTEGER } tasmChannelId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index - SSPPCC" ::= { tasmChannelConfigEntry 1 } tasmChannelIfType OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), toneAnnce(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel Interface Type" DEFVAL { unconfigured } ::= { tasmChannelConfigEntry 2 } tasmChannelAlarmType OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), tasmFailure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field is a read only failure which gives the status of a DSP in the TASM card.When the status is tasmFailure the Operational Status at the interface level will go OOS" DEFVAL { noAlarm } ::= { tasmChannelConfigEntry 3 } tasmChannelModeConfig OBJECT-TYPE SYNTAX INTEGER { casMode(1), tasMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used to configure the mdoe in which a TASM DSP will be used asd a resource. The modes are explained as follows: casMode: DSP resource is used for DTMF/MF tone detection/generation and running the Type 100, 105, and 108 tests. tasMode: DSP resource is used for playing/compressing announcement." DEFVAL { casMode } ::= {tasmChannelConfigEntry 4 } -- The Interface Configuration Group atmUniConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmUniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of atm user to network interface (UNI)" ::= { intfConfig 1 } atmUniConfigEntry OBJECT-TYPE SYNTAX AtmUniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm UNI" INDEX { atmUniIfIndex } ::= { atmUniConfigTable 1 } AtmUniConfigEntry ::= SEQUENCE { atmUniIfIndex IntfIndex, atmUniAddrType INTEGER, atmUniSvcMinVpi INTEGER, atmUniSvcMaxVpi INTEGER, atmUniSvcMinVci INTEGER, atmUniSvcMaxVci INTEGER, atmUniAdminStatus INTEGER, atmUniOperStatus INTEGER, atmUniOverSubscription INTEGER, atmUniNwPrefix1 OCTET STRING, atmUniT303 Integer32, atmUniT308 Integer32, atmUniT309 Integer32, atmUniT310 Integer32, atmUniT313 Integer32, atmUniT316 Integer32, atmUniT317 Integer32, atmUniT322 Integer32, atmUniT398 Integer32, atmUniT399 Integer32, atmUniMyNeighborIpAddress IpAddress, atmUniMyNeighborIfName DisplayString, atmUniVpiSig INTEGER, atmUniVciSig INTEGER, atmUniVpiIlmi INTEGER, atmUniVciIlmi INTEGER, atmUniAtmSignalingStatus INTEGER, atmUniMyIfName DisplayString, atmUniIlmiProtocolStatus INTEGER, atmUniIlmiOperStatus INTEGER, atmUniIlmiConfigProc INTEGER, atmUniIlmiConnectProc INTEGER, atmUniIlmiAttachPtProc INTEGER, atmUniIlmiSecureLinkProc INTEGER, atmUniIlmiAddrRegProc INTEGER, atmUniIlmiTimerS Integer32, atmUniIlmiTimerT Integer32, atmUniIlmiRetryK Integer32, atmUniIntfType INTEGER, atmUniUserAddress OCTET STRING, atmUniViSuppFlag INTEGER, atmUniUPCSupp INTEGER, atmUniUbrLoadBalSupp INTEGER, atmUniAvailBwIgr Integer32, atmUniAvailBwEgr Integer32, atmUniVUNISuppFlag INTEGER, atmUniUserAddrOrgScope INTEGER, atmUniSscopRxWndSz INTEGER, atmUniConnTrafficShapingFlag INTEGER } atmUniIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmUniConfigEntry 1 } atmUniAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), private(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "atm address type" DEFVAL { nsap } ::= { atmUniConfigEntry 2 } atmUniSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmUniConfigEntry 3 } atmUniSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmUniConfigEntry 4 } atmUniSvcMinVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VCI for SVC connections." DEFVAL { 32 } ::= { atmUniConfigEntry 5 } atmUniSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VCI for SVC connections." DEFVAL { 255 } ::= { atmUniConfigEntry 6 } atmUniAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI." DEFVAL { outOfService } ::= { atmUniConfigEntry 7 } atmUniOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service" DEFVAL { outOfService } ::= { atmUniConfigEntry 8 } atmUniNwPrefix1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-write STATUS current DESCRIPTION "ATM Network Prefix 1" ::= { atmUniConfigEntry 9 } atmUniOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Over subscription factor" DEFVAL { 10 } ::= { atmUniConfigEntry 10 } atmUniT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T303 value - seconds" DEFVAL { 4 } ::= { atmUniConfigEntry 11 } atmUniT308 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T308 value - seconds" DEFVAL { 30 } ::= { atmUniConfigEntry 12 } atmUniT309 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T309 value - seconds" DEFVAL { 10 } ::= { atmUniConfigEntry 13 } atmUniT310 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T310 value - seconds" DEFVAL { 10 } ::= { atmUniConfigEntry 14 } atmUniT313 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T313 value - User side only - seconds" DEFVAL { 4 } ::= { atmUniConfigEntry 15 } atmUniT316 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T316 value - seconds" DEFVAL { 120 } ::= { atmUniConfigEntry 16 } atmUniT317 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T317 value - seconds" DEFVAL { 60 } ::= { atmUniConfigEntry 17 } atmUniT322 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T322 value - seconds" DEFVAL { 4 } ::= { atmUniConfigEntry 18} atmUniT398 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T398 value - seconds" DEFVAL { 4 } ::= { atmUniConfigEntry 19 } atmUniT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { atmUniConfigEntry 20 } atmUniMyNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration." ::= { atmUniConfigEntry 21 } atmUniMyNeighborIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration." ::= { atmUniConfigEntry 22 } atmUniVpiSig OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the signalling channel for the UNI interface." DEFVAL { 0 } ::= { atmUniConfigEntry 23 } atmUniVciSig OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the signalling channel for the UNI interface." DEFVAL { 5 } ::= { atmUniConfigEntry 24 } atmUniVpiIlmi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the ilmi channel for the UNI interface." DEFVAL { 0 } ::= { atmUniConfigEntry 25 } atmUniVciIlmi OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the ilmi channel for the UNI interface." DEFVAL { 16 } ::= { atmUniConfigEntry 26 } atmUniAtmSignalingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this interface." DEFVAL { disabled } ::= { atmUniConfigEntry 27 } atmUniMyIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string." ::= { atmUniConfigEntry 29 } atmUniIlmiProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI." DEFVAL { disabled } ::= { atmUniConfigEntry 30 } atmUniIlmiOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up." DEFVAL { outOfService } ::= { atmUniConfigEntry 31 } atmUniIlmiConfigProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Configuration Procedure status." DEFVAL { disabled } ::= { atmUniConfigEntry 32 } atmUniIlmiConnectProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Connectivity Procedure status." DEFVAL { disabled } ::= { atmUniConfigEntry 33 } atmUniIlmiAttachPtProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Attachment Point Procedure status." DEFVAL { disabled } ::= { atmUniConfigEntry 34 } atmUniIlmiSecureLinkProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled." DEFVAL { disabled } ::= { atmUniConfigEntry 35 } atmUniIlmiAddrRegProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Address Registration Procedure status." DEFVAL { disabled } ::= { atmUniConfigEntry 36 } atmUniIlmiTimerS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer S (secs). Used to poll peer when link is down." DEFVAL { 1 } ::= { atmUniConfigEntry 37 } atmUniIlmiTimerT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T (secs). Used to poll peer when link is up." DEFVAL { 5 } ::= { atmUniConfigEntry 38 } atmUniIlmiRetryK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retry K - number of timeouts before link is declared down." DEFVAL { 4 } ::= { atmUniConfigEntry 39 } atmUniIntfType OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "atm interface type" DEFVAL { network } ::= { atmUniConfigEntry 40 } atmUniUserAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7)) MAX-ACCESS read-write STATUS current DESCRIPTION "ATM User Address" ::= { atmUniConfigEntry 41 } atmUniViSuppFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "virtual interface supp off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 42 } atmUniUPCSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "upc supp off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 43 } atmUniUbrLoadBalSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load balancing supp for ubr conns off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 44 } atmUniAvailBwIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for" DEFVAL { 0 } ::= { atmUniConfigEntry 45 } atmUniAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for" DEFVAL { 0 } ::= { atmUniConfigEntry 46 } atmUniVUNISuppFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "virtual UNI interface supp off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 47 } atmUniUserAddrOrgScope OBJECT-TYPE SYNTAX INTEGER { localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "ATM User Address Organizational scope" DEFVAL { global } ::= { atmUniConfigEntry 48 } atmUniSscopRxWndSz OBJECT-TYPE SYNTAX INTEGER (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The receive window size for the SSCOP layer" DEFVAL { 32 } ::= { atmUniConfigEntry 49 } atmUniConnTrafficShapingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled." DEFVAL { disabled } ::= { atmUniConfigEntry 50 } atmIispConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmIispConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of atm iisp interface" ::= { intfConfig 2 } atmIispConfigEntry OBJECT-TYPE SYNTAX AtmIispConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm iisp interface" INDEX { atmIispIfIndex } ::= { atmIispConfigTable 1 } AtmIispConfigEntry ::= SEQUENCE { atmIispIfIndex IntfIndex, atmIispSvcMinVpi INTEGER, atmIispSvcMaxVpi INTEGER, atmIispSvcMinVci INTEGER, atmIispSvcMaxVci INTEGER, atmIispAdminStatus INTEGER, atmIispOperStatus INTEGER, atmIispOverSubscription INTEGER, atmIispT303 Integer32, atmIispT308 Integer32, atmIispT309 Integer32, atmIispT310 Integer32, atmIispT316 Integer32, atmIispT317 Integer32, atmIispT322 Integer32, atmIispT398 Integer32, atmIispT399 Integer32, atmIispAtmSignalingStatus INTEGER, atmIispAvailBwIgr Integer32, atmIispAvailBwEgr Integer32, atmIispUPCSupp INTEGER, atmIispUbrLoadBalSupp INTEGER, atmIispSscopRxWndSz INTEGER, atmIispConnTrafficShapingFlag INTEGER } atmIispIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmIispConfigEntry 1 } atmIispSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmIispConfigEntry 2 } atmIispSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmIispConfigEntry 3 } atmIispSvcMinVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VCI for SVC connections." DEFVAL { 32 } ::= { atmIispConfigEntry 4 } atmIispSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VCI for SVC connections. " DEFVAL { 255 } ::= { atmIispConfigEntry 5 } atmIispAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI." DEFVAL { outOfService } ::= { atmIispConfigEntry 6 } atmIispOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service" DEFVAL { outOfService } ::= { atmIispConfigEntry 7 } atmIispOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Over subscription factor" DEFVAL { 10 } ::= { atmIispConfigEntry 8 } atmIispT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 4 } ::= { atmIispConfigEntry 9 } atmIispT308 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 30 } ::= { atmIispConfigEntry 10 } atmIispT309 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 10 } ::= { atmIispConfigEntry 11 } atmIispT310 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 10 } ::= { atmIispConfigEntry 12 } atmIispT316 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 120 } ::= { atmIispConfigEntry 13 } atmIispT317 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 60 } ::= { atmIispConfigEntry 14 } atmIispT322 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 4 } ::= { atmIispConfigEntry 15 } atmIispT398 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 4 } ::= { atmIispConfigEntry 16 } atmIispT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value - seconds" DEFVAL { 14 } ::= { atmIispConfigEntry 17 } atmIispAtmSignalingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this interface." DEFVAL { disabled } ::= { atmIispConfigEntry 18 } atmIispAvailBwIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmIispConfigEntry 19 } atmIispAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmIispConfigEntry 20 } atmIispUPCSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "upc supp off/on" DEFVAL { disabled } ::= { atmIispConfigEntry 21 } atmIispUbrLoadBalSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load balancing supp for ubr conns off/on" DEFVAL { disabled } ::= { atmIispConfigEntry 22 } atmIispSscopRxWndSz OBJECT-TYPE SYNTAX INTEGER (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The receive window size for the SSCOP layer" DEFVAL { 32 } ::= { atmIispConfigEntry 23 } atmIispConnTrafficShapingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled." DEFVAL { disabled } ::= { atmIispConfigEntry 24 } atmCirEmConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmCirEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for ATM Circuit Emulation Interface" ::= { intfConfig 3 } atmCirEmConfigEntry OBJECT-TYPE SYNTAX AtmCirEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ATM Circuit Emulation interface" INDEX { atmCirEmIfIndex } ::= { atmCirEmConfigTable 1 } AtmCirEmConfigEntry ::= SEQUENCE { atmCirEmIfIndex IntfIndex, atmCirEmAdminStatus INTEGER, atmCirEmOperStatus INTEGER, atmCirEmCASIdleAbcdPattern INTEGER, atmCirEmCASBusyAbcdPattern INTEGER, atmCirEmAlarmDataPattern INTEGER, atmCirEmTCPattern INTEGER, atmCirEmDownStInterworking INTEGER } atmCirEmIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmCirEmConfigEntry 1 } atmCirEmAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { atmCirEmConfigEntry 2 } atmCirEmOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { atmCirEmConfigEntry 3 } atmCirEmCASIdleAbcdPattern OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "abcd bit pattern for cirEm AIS" DEFVAL { 0 } ::= { atmCirEmConfigEntry 4 } atmCirEmCASBusyAbcdPattern OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "abcd bit pattern for cirEm RDI" DEFVAL { 15 } ::= { atmCirEmConfigEntry 5 } atmCirEmAlarmDataPattern OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "data pattern for cirEm AIS" DEFVAL { 127 } ::= { atmCirEmConfigEntry 6 } atmCirEmTCPattern OBJECT-TYPE SYNTAX INTEGER { casIdle(1), casBusy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Should abcd bits be toggled after 2.5 Secs." DEFVAL { casBusy } ::= { atmCirEmConfigEntry 7 } atmCirEmDownStInterworking OBJECT-TYPE SYNTAX INTEGER { unSupp(1), oAM(2), trunkCond(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field will be used to select the type of interworking to be done in the down stream direction." DEFVAL { trunkCond } ::= { atmCirEmConfigEntry 8 } atmTermEmConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTermEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for ATM Terminal Emulation Interface" ::= { intfConfig 4 } atmTermEmConfigEntry OBJECT-TYPE SYNTAX AtmTermEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ATM Terminal Emulation interface" INDEX { atmTermEmIfIndex } ::= { atmTermEmConfigTable 1 } AtmTermEmConfigEntry ::= SEQUENCE { atmTermEmIfIndex IntfIndex, atmTermEmRxTimeOut INTEGER, atmTermEmAdminStatus INTEGER, atmTermEmOperStatus INTEGER } atmTermEmIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmTermEmConfigEntry 1 } atmTermEmRxTimeOut OBJECT-TYPE SYNTAX INTEGER (7..10) MAX-ACCESS read-write STATUS current DESCRIPTION "receive timeout value in tenths of seconds." ::= { atmTermEmConfigEntry 2 } atmTermEmAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { atmTermEmConfigEntry 3 } atmTermEmOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { atmTermEmConfigEntry 4 } hdlcConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HdlcConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for an HDLC Pass Through Interface" ::= { intfConfig 5 } hdlcConfigEntry OBJECT-TYPE SYNTAX HdlcConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for an HDLC Pass Through interface" INDEX { hdlcIfIndex } ::= { hdlcConfigTable 1 } HdlcConfigEntry ::= SEQUENCE { hdlcIfIndex IntfIndex, hdlcAdminStatus INTEGER, hdlcOperStatus INTEGER, hdlcThroughPut INTEGER, hdlcDataInversion INTEGER } hdlcIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { hdlcConfigEntry 1 } hdlcAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { hdlcConfigEntry 2 } hdlcOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service" DEFVAL { outOfService } ::= { hdlcConfigEntry 3 } hdlcThroughPut OBJECT-TYPE SYNTAX INTEGER { k64(1), k56(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb" DEFVAL { k64 } ::= { hdlcConfigEntry 4 } hdlcDataInversion OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag indicating whether data inversion is performed by the IO card for this interface." DEFVAL { disabled } ::= { hdlcConfigEntry 5 } frUniConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FrUniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Frame Realy UNI Interface" ::= { intfConfig 6 } frUniConfigEntry OBJECT-TYPE SYNTAX FrUniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Frame Relay interface" INDEX { frUniIfIndex } ::= { frUniConfigTable 1 } FrUniConfigEntry ::= SEQUENCE { frUniIfIndex IntfIndex, frUniAddrDlciLen INTEGER, frUniDlcmiState INTEGER, frUniAdminStatus INTEGER, frUniOperStatus INTEGER, frUniOverSubscription INTEGER, frUniLmiProtocol INTEGER, frUniInterworkingType INTEGER, frUniN391 INTEGER, frUniN392 INTEGER, frUniN393 INTEGER, frUniT391 INTEGER, frUniT392 INTEGER, frUniAsyncLmi INTEGER, frLmiOperStatus INTEGER, frUniNT3 INTEGER, frUniThroughPut INTEGER } frUniIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { frUniConfigEntry 1 } frUniAddrDlciLen OBJECT-TYPE SYNTAX INTEGER { twoOctets10Bits(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Length of Data Link connection identify of frame relay UNI address" DEFVAL { twoOctets10Bits } ::= { frUniConfigEntry 2 } frUniDlcmiState OBJECT-TYPE SYNTAX INTEGER { noLmi(1), lmiDte(2), lmiDce(3), lmiNni(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of Data Link Connection Management Indentify of frame relay UNI. " DEFVAL { noLmi } ::= { frUniConfigEntry 3 } frUniAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { frUniConfigEntry 4 } frUniOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { frUniConfigEntry 5 } frUniOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet, although higher levels are often acceptable." DEFVAL { 10 } ::= { frUniConfigEntry 6 } frUniLmiProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), ccitt(2), ansi(3), att(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " Lmi protocol to run" DEFVAL { ccitt } ::= { frUniConfigEntry 7 } frUniInterworkingType OBJECT-TYPE SYNTAX INTEGER { frf5(1) , frf8(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " frf5 - fr/atm network interworking frf8 - fr/atm service interworking" DEFVAL { frf8 } ::= { frUniConfigEntry 8 } frUniN391 OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " full status polling counter. DTE:Mandatory, DCE:N/A" DEFVAL { 6 } ::= { frUniConfigEntry 9 } frUniN392 OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " error threshold. DTE:Mandatory, DCE:Mandatory" DEFVAL { 3 } ::= { frUniConfigEntry 10 } frUniN393 OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Monitored event count. DTE:Mandatory, DCE:N/A" DEFVAL { 4 } ::= { frUniConfigEntry 11 } frUniT391 OBJECT-TYPE SYNTAX INTEGER (5..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Link integrity verification timer. DTE:Mandatory, DCE:N/A" DEFVAL { 10 } ::= { frUniConfigEntry 12 } frUniT392 OBJECT-TYPE SYNTAX INTEGER (5..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Polling verification timer. DTE:N/A, DCE:Mandatory" DEFVAL { 15 } ::= { frUniConfigEntry 13 } frUniAsyncLmi OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Async PVC status messages" DEFVAL { enabled } ::= { frUniConfigEntry 14 } frLmiOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the lmi protocol: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { frUniConfigEntry 15 } frUniNT3 OBJECT-TYPE SYNTAX INTEGER (5..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Message frequency timer relevant for ATT LMI only." DEFVAL { 10 } ::= { frUniConfigEntry 16 } frUniThroughPut OBJECT-TYPE SYNTAX INTEGER { k64(1), k56(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb" DEFVAL { k64 } ::= { frUniConfigEntry 17 } dspConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DspConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Dsp Interface" ::= { intfConfig 7 } dspConfigEntry OBJECT-TYPE SYNTAX DspConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Dsp interface" INDEX { dspIfIndex } ::= { dspConfigTable 1 } DspConfigEntry ::= SEQUENCE { dspIfIndex IntfIndex, dspAdminStatus INTEGER, dspOperStatus INTEGER } dspIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { dspConfigEntry 1 } dspAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { dspConfigEntry 2 } dspOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { dspConfigEntry 3 } bridgeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table which hold Config Entries for all bridges." ::= { intfConfig 8 } bridgeConfigEntry OBJECT-TYPE SYNTAX BridgeConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for bridge entries" INDEX { bridgeIfIndex } ::= { bridgeConfigTable 1 } BridgeConfigEntry ::= SEQUENCE { bridgeIfIndex Integer32, bridgeAdminStatus INTEGER, bridgeOperStatus INTEGER, bridgeNumber INTEGER, bridgePortPriority INTEGER, bridgePathCost INTEGER, bridgeConnectionType INTEGER } bridgeIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { bridgeConfigEntry 1 } bridgeAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { bridgeConfigEntry 2 } bridgeOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { bridgeConfigEntry 3 } bridgeNumber OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of bridges" DEFVAL { 0 } ::= { bridgeConfigEntry 4 } bridgePortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1" DEFVAL { 0 } ::= { bridgeConfigEntry 5 } bridgePathCost OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802-1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3" DEFVAL { 1 } ::= { bridgeConfigEntry 6 } bridgeConnectionType OBJECT-TYPE SYNTAX INTEGER { vc(1), llc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Connection types" DEFVAL { vc } ::= { bridgeConfigEntry 7 } bridgeDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table which holds the bridgeDomainEntry data" ::= { intfConfig 9 } bridgeDomainEntry OBJECT-TYPE SYNTAX BridgeDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry for a Bridge Domain on an ethernet card" INDEX { bridgeDomainNumber } ::= { bridgeDomainTable 1 } BridgeDomainEntry ::= SEQUENCE { bridgeDomainNumber Integer32, bridgeDomainAdminStatus INTEGER, bridgeDomainOperStatus INTEGER, bridgeDomainPriority INTEGER, bridgeDomainTimeSinceTopologyChange TimeTicks, bridgeDomainDesignatedRoot OCTET STRING, bridgeDomainRootCost Integer32, bridgeDomainRootPort Integer32, bridgeDomainMaxMessageAge Integer32, bridgeDomainHelloTime Integer32, bridgeDomainHoldTime Integer32, bridgeDomainForwardDelay Integer32, bridgeDomainMaxBridgeAge INTEGER, bridgeDomainBridgeHelloTime INTEGER, bridgeDomainBridgeForwardDelay INTEGER, bridgeDomainAgingTime INTEGER, bridgeDomainSpanningTree INTEGER, bridgeDomainTopologyChanges Integer32, bridgeDomainLearnedEntryDiscards Integer32, bridgeDomainTimer Integer32, bridgeDomainDefaultGateway IpAddress, bridgeDomainPortStatusBitmap OCTET STRING } bridgeDomainNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge number of the bridge which this interface is a part of. If the interface is currently not associated with any bridge this will be set to none." ::= { bridgeDomainEntry 1 } bridgeDomainAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service" DEFVAL { outOfService } ::= { bridgeDomainEntry 2 } bridgeDomainOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { bridgeDomainEntry 3 } bridgeDomainPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the writeable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7" DEFVAL { 0 } ::= { bridgeDomainEntry 4 } bridgeDomainTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detedted by the bridge entity." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { bridgeDomainEntry 5 } bridgeDomainDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { bridgeDomainEntry 6 } bridgeDomainRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of the path to the root as seen from this bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2" ::= { bridgeDomainEntry 7 } bridgeDomainRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3" ::= { bridgeDomainEntry 8 } bridgeDomainMaxMessageAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4" ::= { bridgeDomainEntry 9 } bridgeDomainHelloTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { bridgeDomainEntry 10 } bridgeDomainHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14" ::= { bridgeDomainEntry 11 } bridgeDomainForwardDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to bridgeDomainBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { bridgeDomainEntry 12 } bridgeDomainMaxBridgeAge OBJECT-TYPE SYNTAX INTEGER (6..40) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" DEFVAL { 20 } ::= { bridgeDomainEntry 13 } bridgeDomainBridgeHelloTime OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9" DEFVAL { 2 } ::= { bridgeDomainEntry 14 } bridgeDomainBridgeForwardDelay OBJECT-TYPE SYNTAX INTEGER (4..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges user for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of bridgeDomainMaxBridgeAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" DEFVAL { 15 } ::= { bridgeDomainEntry 15 } bridgeDomainAgingTime OBJECT-TYPE SYNTAX INTEGER (10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds." REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" DEFVAL { 300 } ::= { bridgeDomainEntry 16 } bridgeDomainSpanningTree OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the bridge to be configured to run without the spanning tree algorithm." DEFVAL { enabled } ::= { bridgeDomainEntry 17 } bridgeDomainTopologyChanges OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { bridgeDomainEntry 18 } bridgeDomainLearnedEntryDiscards OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent." REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" ::= { bridgeDomainEntry 19 } bridgeDomainTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds elapsed since the last reset of bridge group statistics" ::= { bridgeDomainEntry 20 } bridgeDomainDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default gateway for this bridge domain. This is now an obsolete entry" ::= { bridgeDomainEntry 21 } bridgeDomainPortStatusBitmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(30)) MAX-ACCESS read-only STATUS current DESCRIPTION " A bit map describing which ports in a bridge group are up or down" ::= { bridgeDomainEntry 22 } routerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RouterConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table which hold Config Entries for all routers (VPNs)" ::= { intfConfig 10 } routerConfigEntry OBJECT-TYPE SYNTAX RouterConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " config data for a router (VPN) " INDEX { routerIfIndex } ::= { routerConfigTable 1 } RouterConfigEntry ::= SEQUENCE { routerIfIndex Integer32, routerAdminStatus INTEGER, routerOperStatus INTEGER, routerIpAddress IpAddress, routerIpNetworkMask IpAddress, routerNumber INTEGER, routerEthernetIpAddress IpAddress } routerIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " A scalar number which identifies an IP interface within a given router (VPN)" ::= { routerConfigEntry 1 } routerAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { routerConfigEntry 2 } routerOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { routerConfigEntry 3 } routerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "router ATM IP Address." ::= { routerConfigEntry 4 } routerIpNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " An IP network mask for an IP interface within a given router (VPN)" ::= { routerConfigEntry 5 } routerNumber OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-write STATUS current DESCRIPTION " A scalar number which identifies a given router (VPN)" DEFVAL { 0 } ::= { routerConfigEntry 6 } routerEthernetIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "router Ethernet IP Address." ::= { routerConfigEntry 7 } isdnConfig OBJECT IDENTIFIER ::= { intfConfig 11 } isdnIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF IsdnIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ISDN interface configuration attriburtes" ::= { isdnConfig 1 } isdnIntfConfigEntry OBJECT-TYPE SYNTAX IsdnIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ISDN interface configuration table" INDEX { isdnIntfId } ::= { isdnIntfConfigTable 1 } IsdnIntfConfigEntry ::= SEQUENCE { isdnIntfId Integer32, isdnIntfDChanId Integer32, isdnIntfAdminStatus INTEGER, isdnIntfOperStatus INTEGER, isdnIntfSwitchType INTEGER } isdnIntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface ID (SSPPCCC)" ::= { isdnIntfConfigEntry 1 } isdnIntfDChanId OBJECT-TYPE SYNTAX Integer32 (0..24) MAX-ACCESS read-write STATUS current DESCRIPTION "D-Channel Number - if the Dchannel no. is 0 no LAPD will run on this PRI-ISDN interface" DEFVAL { 0 } ::= { isdnIntfConfigEntry 2 } isdnIntfAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2), delete (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "ISDN interface admin status" ::= { isdnIntfConfigEntry 3 } isdnIntfOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ISDN interface operational status" ::= { isdnIntfConfigEntry 4 } isdnIntfSwitchType OBJECT-TYPE SYNTAX INTEGER { pri-ni2 (1), pri-net5 (2), pri-1tr6 (3), pri-4ess (4), pri-5ess (5), pri-dass2 (6), pri-dms100 (7), pri-kdd (8), pri-ntt (9), pri-net5sw (10), pri-ts014 (11), pri-vn (12) } MAX-ACCESS read-write STATUS current DESCRIPTION "ISDN interface Switch Type" DEFVAL { pri-ni2 } ::= { isdnIntfConfigEntry 5 } -- LAPD configuration table isdnL2ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF IsdnL2ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Layer 2 (LAPD) attributes" ::= { isdnConfig 2 } isdnL2ConfigEntry OBJECT-TYPE SYNTAX IsdnL2ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ISDN LAPD parameters" INDEX { isdnL2IntfId } ::= { isdnL2ConfigTable 1 } IsdnL2ConfigEntry ::= SEQUENCE { isdnL2IntfId INTEGER, isdnT200 INTEGER, isdnT203 INTEGER, isdnN200 INTEGER, isdnN201 INTEGER, isdnK INTEGER, isdnL2OperStatus INTEGER, isdnL2CurrentState INTEGER } isdnL2IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC)" ::= { isdnL2ConfigEntry 1 } isdnT200 OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "value of L2 T200 timer in 1/10 seconds" DEFVAL { 10 } ::= { isdnL2ConfigEntry 2 } isdnT203 OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "value of L2 T203 timer in seconds" DEFVAL { 10 } ::= { isdnL2ConfigEntry 3 } isdnN200 OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of retransmissions before the LAPD Link is declared as down" DEFVAL { 3 } ::= { isdnL2ConfigEntry 4 } isdnN201 OBJECT-TYPE SYNTAX INTEGER (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of octets in an information field - Maximum value of this parameter will be 300 bytes." DEFVAL { 260 } ::= { isdnL2ConfigEntry 5 } isdnK OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of outstanding I frames - L2 - window size." DEFVAL { 7 } ::= { isdnL2ConfigEntry 6 } isdnL2OperStatus OBJECT-TYPE SYNTAX INTEGER { not-initiated (1) , up (2), down (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "ISDN Layer 2 operational status - not-initiated means that first SETUP message has not been transmitted and L2 estalishment procedure has not been initiated yet" ::= { isdnL2ConfigEntry 7} isdnL2CurrentState OBJECT-TYPE SYNTAX INTEGER { tei-unassigned(1), tei-assigned (4), awaiting-establishment (5), awaiting-release (6), multiple-frame-established (7), timer-recovery (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "ISDN Layer 2 protocol's current state" ::= { isdnL2ConfigEntry 8} -- ISDN B Channel Table isdnBChanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF IsdnBChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ISDN B Channel configuration attriburtes" ::= { isdnConfig 3 } isdnBChanConfigEntry OBJECT-TYPE SYNTAX IsdnBChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ISDN B Channel configuration table" INDEX { isdnBChanId } ::= { isdnBChanConfigTable 1 } IsdnBChanConfigEntry ::= SEQUENCE { isdnBChanId INTEGER, isdnBChanAdminStatus INTEGER, isdnBChanOperStatus INTEGER } isdnBChanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "B Chan ID (SSPPCCC)" ::= { isdnBChanConfigEntry 1 } isdnBChanAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ISDN B Chan admin status" ::= { isdnBChanConfigEntry 2 } isdnBChanOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ISDN B Chan operational status" ::= { isdnBChanConfigEntry 3 } atmDbCirEmConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmDbCirEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for ATM DBCES Interface" ::= { intfConfig 12 } atmDbCirEmConfigEntry OBJECT-TYPE SYNTAX AtmDbCirEmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ATM Dynamic Bandwidth Circuit Emulation interface." INDEX { atmDbCirEmIfIndex } ::= { atmDbCirEmConfigTable 1 } AtmDbCirEmConfigEntry ::= SEQUENCE { atmDbCirEmIfIndex IntfIndex, atmDbCirEmAdminStatus INTEGER, atmDbCirEmOperStatus INTEGER, atmDbCirEmIdlePattern Integer32, atmDbCirEmServiceType INTEGER, atmDbCirEmDbcesType INTEGER, atmDbCirEmIntegrationTime INTEGER } atmDbCirEmIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (slot/port/channel) SSPPCCC." ::= { atmDbCirEmConfigEntry 1 } atmDbCirEmAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { atmDbCirEmConfigEntry 2 } atmDbCirEmOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { atmDbCirEmConfigEntry 3 } atmDbCirEmIdlePattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Idle pattern for idle data." DEFVAL { 127 } ::= { atmDbCirEmConfigEntry 7 } atmDbCirEmServiceType OBJECT-TYPE SYNTAX INTEGER { plar(1), fxo-loopstart(2), fxs-loopstart(3), fxo-groundstart(4), fxs-groundstart(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type to be used. Affects the ABCD Signaling." DEFVAL { plar } ::= { atmDbCirEmConfigEntry 8 } atmDbCirEmDbcesType OBJECT-TYPE SYNTAX INTEGER { lucent(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of dbces used. yurie: Yurie proprietary specific." DEFVAL { lucent } ::= { atmDbCirEmConfigEntry 9 } atmDbCirEmIntegrationTime OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the time to wait after receiving idle pattern to change state. The unit is in seconds." DEFVAL { 1 } ::= { atmDbCirEmConfigEntry 10 } lmiDlciConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LmiDlciConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Lmi DLCI Interface." ::= { intfConfig 13 } lmiDlciConfigEntry OBJECT-TYPE SYNTAX LmiDlciConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Lmi DLCI Interface." INDEX { lmiDlciIfIndex, lmiDlci } ::= { lmiDlciConfigTable 1 } LmiDlciConfigEntry ::= SEQUENCE { lmiDlciIfIndex IntfIndex, lmiDlci Integer32, lmiDlciOperStatus INTEGER, lmiDlciStatusTime Integer32 } lmiDlciIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (slot/port/channel) SSPPCCC." ::= { lmiDlciConfigEntry 1 } lmiDlci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "dlci." ::= { lmiDlciConfigEntry 2 } lmiDlciOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the lmi protocol: 'outOfService' protocol is out of service 'inService' protocol is in service" DEFVAL { outOfService } ::= { lmiDlciConfigEntry 3 } lmiDlciStatusTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time since last status transition occurred." ::= { lmiDlciConfigEntry 4 } dsp2ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsp2ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for Dsp2 Interface" ::= { intfConfig 14 } dsp2ConfigEntry OBJECT-TYPE SYNTAX Dsp2ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Dsp2 interface" INDEX { dsp2IfIndex } ::= { dsp2ConfigTable 1 } Dsp2ConfigEntry ::= SEQUENCE { dsp2IfIndex IntfIndex, dsp2AdminStatus INTEGER, dsp2OperStatus INTEGER, dsp2LoadCount Integer32, dsp2AalMode INTEGER } dsp2IfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { dsp2ConfigEntry 1 } dsp2AdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { dsp2ConfigEntry 2 } dsp2OperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { dsp2ConfigEntry 3 } dsp2LoadCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the number of calls going through that dsp. This will be of use in case of deletion of dsp interface. When no calls are going through the dsp this value will be 0" ::= { dsp2ConfigEntry 4 } dsp2AalMode OBJECT-TYPE SYNTAX INTEGER { aal2-non-multiplexed(1), aal2-standard(2), aal1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "aal2-non-multiplexed : Does not support multiplexing of multiple channels with one trunk aal2-standard: Support Standard Aal2 Multiplexing aal1:Support Aal1 mode. " DEFVAL { aal2-non-multiplexed } ::= { dsp2ConfigEntry 5 } atmImaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmImaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inverse Multiplexing interface table." ::= { intfConfig 15 } atmImaConfigEntry OBJECT-TYPE SYNTAX AtmImaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Inverse Multiplexing attributes" INDEX { atmImaIntfIndex } ::= { atmImaConfigTable 1 } AtmImaConfigEntry ::= SEQUENCE { atmImaIntfIndex IntfIndex, atmImaNeTxState INTEGER, atmImaNeRxState INTEGER, atmImaFeTxState INTEGER, atmImaFeRxState INTEGER, atmImaNeRxDefect INTEGER, atmImaFeRxDefect INTEGER, atmImaAdminStatus INTEGER, atmImaOperStatus INTEGER } atmImaIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmImaConfigEntry 1 } atmImaNeTxState OBJECT-TYPE SYNTAX INTEGER { notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The near-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use." DEFVAL { notInGroup } ::= { atmImaConfigEntry 2 } atmImaNeRxState OBJECT-TYPE SYNTAX INTEGER { notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The near-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use." DEFVAL { notInGroup } ::= { atmImaConfigEntry 3 } atmImaFeTxState OBJECT-TYPE SYNTAX INTEGER { notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end transmit state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use." DEFVAL { notInGroup } ::= { atmImaConfigEntry 4 } atmImaFeRxState OBJECT-TYPE SYNTAX INTEGER { notInGroup(1), unusableNoReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end receive state. notInGroup -- Interface is not assigned to group unusableNoReason -- Doesn't work; Don't know why. unusableFailed -- Check the Defect value usable -- Interface is ready to go. active -- Interface is in use." DEFVAL { notInGroup } ::= { atmImaConfigEntry 5 } atmImaNeRxDefect OBJECT-TYPE SYNTAX INTEGER { noDefect(1), linkFailure(2), lif(3), lods(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The near-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization)" DEFVAL { noDefect } ::= { atmImaConfigEntry 6 } atmImaFeRxDefect OBJECT-TYPE SYNTAX INTEGER { noDefect(1), linkFailure(2), lif(3), lods(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end receive defect. noDefect -- No link defect exists linkFailure -- Physical failure/ Loss of signal lifDefect -- Persistence of LIF defect at near-end (Loss of IMA Frame) lodsDefect -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization)" DEFVAL { noDefect } ::= { atmImaConfigEntry 7 } atmImaAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { atmImaConfigEntry 8 } atmImaOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service" DEFVAL { outOfService } ::= { atmImaConfigEntry 9 } atmPnniConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmPnniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of atm PNNI Configuration" ::= { intfConfig 16 } atmPnniConfigEntry OBJECT-TYPE SYNTAX AtmPnniConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of PNNI Configuration" INDEX { atmPnniIfIndex } ::= { atmPnniConfigTable 1 } AtmPnniConfigEntry ::= SEQUENCE { atmPnniIfIndex IntfIndex, atmPnniSvcMinVpi INTEGER, atmPnniSvcMaxVpi INTEGER, atmPnniSvcMinVci INTEGER, atmPnniSvcMaxVci INTEGER, atmPnniAdminStatus INTEGER, atmPnniOperStatus INTEGER, atmPnniT303 Integer32, atmPnniT308 Integer32, atmPnniT309 Integer32, atmPnniT310 Integer32, atmPnniT313 Integer32, atmPnniT316 Integer32, atmPnniT317 Integer32, atmPnniT322 Integer32, atmPnniT397 Integer32, atmPnniT398 Integer32, atmPnniT399 Integer32, atmPnniCbrServCatSupp INTEGER, atmPnniCbrGcacClpEqualZero INTEGER, atmPnniCbrMaxCellRate Integer32, atmPnniCbrAvailCellRate Integer32, atmPnniCbrCellXerDelay Integer32, atmPnniCbrCellLossRatioZero Integer32, atmPnniCbrCellLossRatioZeroPlusOne Integer32, atmPnniCbrCellDelayVar Integer32, atmPnniRtVbrServCatSupp INTEGER, atmPnniRtVbrGcacClpEqualZero INTEGER, atmPnniRtVbrMaxCellRate Integer32, atmPnniRtVbrAvailCellRate Integer32, atmPnniRtVbrCellXerDelay Integer32, atmPnniRtVbrCellLossRatioZero Integer32, atmPnniRtVbrCellLossRatioZeroPlusOne Integer32, atmPnniRtVbrCellDelayVar Integer32, atmPnniRtVbrGcacPresent INTEGER, atmPnniRtVbrCellRateMargin Integer32, atmPnniRtVbrVarianceFactor Integer32, atmPnniNrtVbrServCatSupp Integer32, atmPnniNrtVbrGcacClpEqualZero Integer32, atmPnniNrtVbrMaxCellRate Integer32, atmPnniNrtVbrAvailCellRate Integer32, atmPnniNrtVbrCellXerDelay Integer32, atmPnniNrtVbrCellLossRatioZero Integer32, atmPnniNrtVbrCellLossRatioZeroPlusOne Integer32, atmPnniNrtVbrGcacPresent INTEGER, atmPnniNrtVbrCellRateMargin Integer32, atmPnniNrtVbrVarianceFactor Integer32, atmPnniAbrServCatSupp Integer32, atmPnniAbrMaxCellRate Integer32, atmPnniAbrAvailCellRate Integer32, atmPnniUbrServCatSupp Integer32, atmPnniUbrMaxCellRate Integer32, atmPnniOverSubscription INTEGER, atmPnniSgnlEnabled INTEGER, atmPnniVpiSig INTEGER, atmPnniVciSig INTEGER, atmPnniAvailBwIgr Integer32, atmPnniAvailBwEgr Integer32, atmPnniUPCSupp INTEGER, atmPnniUbrLoadBalSupp INTEGER, atmPnniSscopRxWndSz INTEGER, atmPnniRemoteSvcMinVpi INTEGER, atmPnniRemoteSvcMaxVpi INTEGER, atmPnniRemoteSvcMinVci INTEGER, atmPnniRemoteSvcMaxVci INTEGER, atmPnniVpiIlmi INTEGER, atmPnniVciIlmi INTEGER, atmPnniIlmiProtocolStatus INTEGER, atmPnniIlmiOperStatus INTEGER, atmPnniIlmiConfigProc INTEGER, atmPnniIlmiConnectProc INTEGER, atmPnniIlmiAttachPtProc INTEGER, atmPnniIlmiSecureLinkProc INTEGER, atmPnniIlmiAddrRegProc INTEGER, atmPnniIlmiTimerS Integer32, atmPnniIlmiTimerT Integer32, atmPnniIlmiRetryK Integer32, atmPnniConnTrafficShapingFlag INTEGER } atmPnniIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmPnniConfigEntry 1 } atmPnniSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmPnniConfigEntry 2 } atmPnniSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmPnniConfigEntry 3 } atmPnniSvcMinVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VCI for SVC connections." DEFVAL { 512 } ::= { atmPnniConfigEntry 4 } atmPnniSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VCI for SVC connections." DEFVAL { 512 } ::= { atmPnniConfigEntry 5 } atmPnniAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the PNNI out of service 'inService' means take the PNNI in service 'delete' remove/deconfigure the PNNI." DEFVAL { outOfService } ::= { atmPnniConfigEntry 6 } atmPnniOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the PNNI: 'outOfService' means the PNNI is out of service 'inService' means the PNNI is in service" DEFVAL { outOfService } ::= { atmPnniConfigEntry 7 } atmPnniT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T303 value - seconds" DEFVAL { 4 } ::= { atmPnniConfigEntry 8 } atmPnniT308 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T308 value - seconds" DEFVAL { 30 } ::= { atmPnniConfigEntry 9 } atmPnniT309 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T309 value - seconds" DEFVAL { 10 } ::= { atmPnniConfigEntry 10 } atmPnniT310 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T310 value - seconds" DEFVAL { 10 } ::= { atmPnniConfigEntry 11 } atmPnniT313 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T313 value - User side only - seconds" DEFVAL { 4 } ::= { atmPnniConfigEntry 12 } atmPnniT316 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T316 value - seconds" DEFVAL { 120 } ::= { atmPnniConfigEntry 13 } atmPnniT317 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T317 value - seconds" DEFVAL { 60 } ::= { atmPnniConfigEntry 14 } atmPnniT322 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T322 value - seconds" DEFVAL { 4 } ::= { atmPnniConfigEntry 15} atmPnniT397 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T397 value - seconds" DEFVAL { 4 } ::= { atmPnniConfigEntry 16 } atmPnniT398 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T398 value - seconds" DEFVAL { 4 } ::= { atmPnniConfigEntry 17 } atmPnniT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { atmPnniConfigEntry 18 } atmPnniCbrServCatSupp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If CBR category is supported" DEFVAL { enabled } ::= { atmPnniConfigEntry 19 } atmPnniCbrGcacClpEqualZero OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic" DEFVAL { disabled } ::= { atmPnniConfigEntry 20 } atmPnniCbrMaxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Maximum Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 21 } atmPnniCbrAvailCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Available Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 22 } atmPnniCbrCellXerDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Cell Transfer Delay" DEFVAL { 0 } ::= { atmPnniConfigEntry 23 } atmPnniCbrCellLossRatioZero OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Cell Loss Ratio for CLP=0 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 24 } atmPnniCbrCellLossRatioZeroPlusOne OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Cell Loss Ratio for CLP=0+1 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 25 } atmPnniCbrCellDelayVar OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CBR category Cell Delay Variation" DEFVAL { 0 } ::= { atmPnniConfigEntry 26 } atmPnniRtVbrServCatSupp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If RT VBR category is supported" DEFVAL { enabled } ::= { atmPnniConfigEntry 27 } atmPnniRtVbrGcacClpEqualZero OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic" DEFVAL { disabled } ::= { atmPnniConfigEntry 28 } atmPnniRtVbrMaxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Maximum Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 29 } atmPnniRtVbrAvailCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Available Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 30 } atmPnniRtVbrCellXerDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Cell Transfer Delay" DEFVAL { 0 } ::= { atmPnniConfigEntry 31 } atmPnniRtVbrCellLossRatioZero OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Cell Loss Ratio for CLP=0 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 32 } atmPnniRtVbrCellLossRatioZeroPlusOne OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Cell Loss Ratio for CLP=0+1 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 33 } atmPnniRtVbrCellDelayVar OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Cell Delay Variation" DEFVAL { 0 } ::= { atmPnniConfigEntry 34 } atmPnniRtVbrGcacPresent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If RT VBR category GCAC Parameters present" DEFVAL { disabled } ::= { atmPnniConfigEntry 35 } atmPnniRtVbrCellRateMargin OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Cell Rate Margin" DEFVAL { 0 } ::= { atmPnniConfigEntry 36 } atmPnniRtVbrVarianceFactor OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "RT VBR category Variance Factor" DEFVAL { 0 } ::= { atmPnniConfigEntry 37 } atmPnniNrtVbrServCatSupp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If NRT VBR category is supported" DEFVAL { enabled } ::= { atmPnniConfigEntry 38 } atmPnniNrtVbrGcacClpEqualZero OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic" DEFVAL { disabled } ::= { atmPnniConfigEntry 39 } atmPnniNrtVbrMaxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Maximum Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 40 } atmPnniNrtVbrAvailCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Available Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 41 } atmPnniNrtVbrCellXerDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Cell Transfer Delay" DEFVAL { 0 } ::= { atmPnniConfigEntry 42 } atmPnniNrtVbrCellLossRatioZero OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Cell Loss Ratio for CLP=0 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 43 } atmPnniNrtVbrCellLossRatioZeroPlusOne OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Cell Loss Ratio for CLP=0+1 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 44 } atmPnniNrtVbrGcacPresent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If NRT VBR category GCAC Parameters present" DEFVAL { disabled } ::= { atmPnniConfigEntry 45 } atmPnniNrtVbrCellRateMargin OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Cell Rate Margin" DEFVAL { 0 } ::= { atmPnniConfigEntry 46 } atmPnniNrtVbrVarianceFactor OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Variance Factor" DEFVAL { 0 } ::= { atmPnniConfigEntry 47 } atmPnniAbrServCatSupp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If ABR category is supported" DEFVAL { disabled } ::= { atmPnniConfigEntry 48 } atmPnniAbrMaxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "ABR category Maximum Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 49 } atmPnniAbrAvailCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "ABR category Available Cell Rate" DEFVAL { 0 } ::= { atmPnniConfigEntry 50 } atmPnniUbrServCatSupp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "UBR category Cell Transfer Delay" DEFVAL { enabled } ::= { atmPnniConfigEntry 51 } atmPnniUbrMaxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NRT VBR category Cell Loss Ratio for CLP=0 traffic" DEFVAL { 0 } ::= { atmPnniConfigEntry 52 } atmPnniOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Over subscription factor for PNNI Intf." DEFVAL { 10 } ::= { atmPnniConfigEntry 53 } atmPnniSgnlEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this PNNI interface." DEFVAL { enabled } ::= { atmPnniConfigEntry 54 } atmPnniVpiSig OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the signalling channel for the PNNI interface." DEFVAL { 0 } ::= { atmPnniConfigEntry 55 } atmPnniVciSig OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the signalling channel for the PNNI interface." DEFVAL { 5 } ::= { atmPnniConfigEntry 56 } atmPnniAvailBwIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmPnniConfigEntry 57 } atmPnniAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmPnniConfigEntry 58 } atmPnniUPCSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "upc supp off/on" DEFVAL { disabled } ::= { atmPnniConfigEntry 59 } atmPnniUbrLoadBalSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load balancing supp for ubr conns off/on" DEFVAL { disabled } ::= { atmPnniConfigEntry 60 } atmPnniSscopRxWndSz OBJECT-TYPE SYNTAX INTEGER (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The receive window size for the SSCOP layer" DEFVAL { 32 } ::= { atmPnniConfigEntry 61 } atmPnniRemoteSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The lower bound of the actual VPI for SVC connections." DEFVAL { 0 } ::= { atmPnniConfigEntry 62 } atmPnniRemoteSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The Upper bound of the actual VPI for SVC connections." DEFVAL { 0 } ::= { atmPnniConfigEntry 63 } atmPnniRemoteSvcMinVci OBJECT-TYPE SYNTAX INTEGER (32..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The lower bound of the actual VCI for SVC connections." DEFVAL { 32 } ::= { atmPnniConfigEntry 64} atmPnniRemoteSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (32..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Upper bound of the actual VCI for SVC connections." DEFVAL { 65535 } ::= { atmPnniConfigEntry 65 } atmPnniVpiIlmi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the ilmi channel for the PNNI interface." DEFVAL { 0 } ::= { atmPnniConfigEntry 66 } atmPnniVciIlmi OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the ilmi channel for the PNNI interface." DEFVAL { 16 } ::= { atmPnniConfigEntry 67} atmPnniIlmiProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status: 'enabled' - ILMI protocol enabled on PNNI 'disabled' - ILMI protocol disabled on PNNI ." DEFVAL { disabled } ::= { atmPnniConfigEntry 68 } atmPnniIlmiOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up." DEFVAL { outOfService } ::= { atmPnniConfigEntry 69 } atmPnniIlmiConfigProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Configuration Procedure status." DEFVAL { disabled } ::= { atmPnniConfigEntry 70 } atmPnniIlmiConnectProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Connectivity Procedure status." DEFVAL { disabled } ::= { atmPnniConfigEntry 71 } atmPnniIlmiAttachPtProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Attachment Point Procedure status." DEFVAL { disabled } ::= { atmPnniConfigEntry 72 } atmPnniIlmiSecureLinkProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled." DEFVAL { disabled } ::= { atmPnniConfigEntry 73 } atmPnniIlmiAddrRegProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Address Registration Procedure status." DEFVAL { disabled } ::= { atmPnniConfigEntry 74 } atmPnniIlmiTimerS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer S (secs). Used to poll peer when link is down." DEFVAL { 1 } ::= { atmPnniConfigEntry 75 } atmPnniIlmiTimerT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T (secs). Used to poll peer when link is up." DEFVAL { 5 } ::= { atmPnniConfigEntry 76 } atmPnniIlmiRetryK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retry K - number of timeouts of before link is declared down." DEFVAL { 4 } ::= { atmPnniConfigEntry 77} atmPnniConnTrafficShapingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the hardware added traffic shaping per connection. But condition is VI should not be enabled if this feature is enabled." DEFVAL { disabled } ::= { atmPnniConfigEntry 78 } -- End of 1 MIB Table Entries -- The 1 Interface Configuration Group atmVnnConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmVnnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of atm user to network interface (UNI)" ::= { intfConfig 17 } atmVnnConfigEntry OBJECT-TYPE SYNTAX AtmVnnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm UNI" INDEX { atmVnnIfIndex } ::= { atmVnnConfigTable 1 } AtmVnnConfigEntry ::= SEQUENCE { atmVnnIfIndex IntfIndex, atmVnnAddrType INTEGER, atmVnnSvcMinVpi INTEGER, atmVnnSvcMaxVpi INTEGER, atmVnnSvcMinVci INTEGER, atmVnnSvcMaxVci INTEGER, atmVnnAdminStatus INTEGER, atmVnnOperStatus INTEGER, atmVnnOverSubscription INTEGER, atmVnnNwPrefix1 OCTET STRING, atmVnnT303 Integer32, atmVnnT308 Integer32, atmVnnT309 Integer32, atmVnnT310 Integer32, atmVnnT313 Integer32, atmVnnT316 Integer32, atmVnnT317 Integer32, atmVnnT322 Integer32, atmVnnT398 Integer32, atmVnnT399 Integer32, atmVnnMyNeighborIpAddress IpAddress, atmVnnMyNeighborIfName DisplayString, atmVnnVpiSig INTEGER, atmVnnVciSig INTEGER, atmVnnVpiIlmi INTEGER, atmVnnVciIlmi INTEGER, atmVnnAtmSignalingStatus INTEGER, atmVnnMyIfName DisplayString, atmVnnIlmiProtocolStatus INTEGER, atmVnnIlmiOperStatus INTEGER, atmVnnIlmiConfigProc INTEGER, atmVnnIlmiConnectProc INTEGER, atmVnnIlmiAttachPtProc INTEGER, atmVnnIlmiSecureLinkProc INTEGER, atmVnnIlmiAddrRegProc INTEGER, atmVnnIlmiTimerS Integer32, atmVnnIlmiTimerT Integer32, atmVnnIlmiRetryK Integer32, atmVnnAvailBwIgr Integer32, atmVnnAvailBwEgr Integer32, atmVnnUPCSupp INTEGER, atmVnnUbrLoadBalSupp INTEGER, atmVnnSscopRxWndSz INTEGER } atmVnnIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmVnnConfigEntry 1 } atmVnnAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), private(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "atm address type" DEFVAL { nsap } ::= { atmVnnConfigEntry 2 } atmVnnSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmVnnConfigEntry 3 } atmVnnSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VPI for SVC connections." DEFVAL { 0 } ::= { atmVnnConfigEntry 4 } atmVnnSvcMinVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VCI for SVC connections." DEFVAL { 32 } ::= { atmVnnConfigEntry 5 } atmVnnSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VCI for SVC connections." DEFVAL { 255 } ::= { atmVnnConfigEntry 6 } atmVnnAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' remove/deconfigure the UNI." DEFVAL { outOfService } ::= { atmVnnConfigEntry 7 } atmVnnOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service" DEFVAL { outOfService } ::= { atmVnnConfigEntry 8 } atmVnnOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Over subscription factor" DEFVAL { 10 } ::= { atmVnnConfigEntry 9 } atmVnnNwPrefix1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-only STATUS current DESCRIPTION "ATM Network Prefix 1" ::= { atmVnnConfigEntry 10 } atmVnnT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T303 value - seconds" DEFVAL { 4 } ::= { atmVnnConfigEntry 11 } atmVnnT308 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T308 value - seconds" DEFVAL { 30 } ::= { atmVnnConfigEntry 12 } atmVnnT309 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T309 value - seconds" DEFVAL { 10 } ::= { atmVnnConfigEntry 13 } atmVnnT310 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T310 value - seconds" DEFVAL { 10 } ::= { atmVnnConfigEntry 14 } atmVnnT313 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T313 value - User side only - seconds" DEFVAL { 4 } ::= { atmVnnConfigEntry 15 } atmVnnT316 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T316 value - seconds" DEFVAL { 120 } ::= { atmVnnConfigEntry 16 } atmVnnT317 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T317 value - seconds" DEFVAL { 60 } ::= { atmVnnConfigEntry 17 } atmVnnT322 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T322 value - seconds" DEFVAL { 4 } ::= { atmVnnConfigEntry 18} atmVnnT398 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T398 value - seconds" DEFVAL { 4 } ::= { atmVnnConfigEntry 19 } atmVnnT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { atmVnnConfigEntry 20 } atmVnnMyNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration." ::= { atmVnnConfigEntry 21 } atmVnnMyNeighborIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration." ::= { atmVnnConfigEntry 22 } atmVnnVpiSig OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the signalling channel for the UNI interface." DEFVAL { 0 } ::= { atmVnnConfigEntry 23 } atmVnnVciSig OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the signalling channel for the UNI interface." DEFVAL { 5 } ::= { atmVnnConfigEntry 24 } atmVnnVpiIlmi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the ilmi channel for the UNI interface." DEFVAL { 0 } ::= { atmVnnConfigEntry 25 } atmVnnVciIlmi OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the ilmi channel for the UNI interface." DEFVAL { 16 } ::= { atmVnnConfigEntry 26 } atmVnnAtmSignalingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces" ::= { atmVnnConfigEntry 27 } atmVnnMyIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string." ::= { atmVnnConfigEntry 28 } atmVnnIlmiProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative status: 'enabled' - ILMI protocol enabled on UNI." ::= { atmVnnConfigEntry 29 } atmVnnIlmiOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up." DEFVAL { outOfService } ::= { atmVnnConfigEntry 30 } atmVnnIlmiConfigProc OBJECT-TYPE SYNTAX INTEGER { disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI Configuration Procedure status." ::= { atmVnnConfigEntry 31 } atmVnnIlmiConnectProc OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI Connectivity Procedure status." ::= { atmVnnConfigEntry 32 } atmVnnIlmiAttachPtProc OBJECT-TYPE SYNTAX INTEGER { disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI Attachment Point Procedure status." ::= { atmVnnConfigEntry 33 } atmVnnIlmiSecureLinkProc OBJECT-TYPE SYNTAX INTEGER { disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled." ::= { atmVnnConfigEntry 34 } atmVnnIlmiAddrRegProc OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI Address Registration Procedure status." ::= { atmVnnConfigEntry 35 } atmVnnIlmiTimerS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer S (secs). Used to poll peer when link is down." DEFVAL { 1 } ::= { atmVnnConfigEntry 36 } atmVnnIlmiTimerT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T (secs). Used to poll peer when link is up." DEFVAL { 5 } ::= { atmVnnConfigEntry 37 } atmVnnIlmiRetryK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retry K - number of timeouts before link is declared down." DEFVAL { 4 } ::= { atmVnnConfigEntry 38 } atmVnnAvailBwIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmVnnConfigEntry 39 } atmVnnAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for." DEFVAL { 0 } ::= { atmVnnConfigEntry 40 } atmVnnUPCSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "upc supp off/on " DEFVAL { disabled } ::= { atmVnnConfigEntry 41 } atmVnnUbrLoadBalSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load balancing supp for ubr conns off/on" DEFVAL { disabled } ::= { atmVnnConfigEntry 42 } atmVnnSscopRxWndSz OBJECT-TYPE SYNTAX INTEGER (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The receive window size for the SSCOP layer" DEFVAL { 32 } ::= { atmVnnConfigEntry 43 } -- End of 1 Interface Configuration Group virtualIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Virtual Interfaces Configurations" ::= { intfConfig 18 } virtualIntfConfigEntry OBJECT-TYPE SYNTAX VirtualIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index is the Interface and the Virutal Interface" INDEX { virtualIntfConfigIf, virtualIntfConfigVi } ::= { virtualIntfConfigTable 1 } VirtualIntfConfigEntry ::= SEQUENCE { virtualIntfConfigIf IntfIndex, virtualIntfConfigVi INTEGER, virtualIntfConfigCellRate Integer32, virtualIntfConfigOverSubs Integer32, virtualIntfConfigRowStatus RowStatus, virtualIntfConfigUPCSupp INTEGER, virtualIntfAvailBwEgr Integer32 } virtualIntfConfigIf OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { virtualIntfConfigEntry 1 } virtualIntfConfigVi OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VI value. Def Val is 1 because 0 cannot be configured" DEFVAL { 1 } ::= { virtualIntfConfigEntry 2 } virtualIntfConfigCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Bandwidth assigned for the VI. The unit is cells per sec. Total Bandwidth of all VI's cannot exceed bandwidth of the main interface. CAC will be supported per VI." ::= { virtualIntfConfigEntry 3 } virtualIntfConfigOverSubs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Over Subscription rate for VI " ::= { virtualIntfConfigEntry 4 } virtualIntfConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { virtualIntfConfigEntry 5 } virtualIntfConfigUPCSupp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "virtual interface upc supp off/on If this is changed then all the connections on this interface will be replayed." DEFVAL { disabled } ::= { virtualIntfConfigEntry 6 } virtualIntfAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Avail Bw for that VI in cells per sec in the Egress Direction or the direction away from back plane." ::= { virtualIntfConfigEntry 7 } -- Virtual UNI configuration table virtualUNIConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualUNIConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Virtual UNI Interfaces Configurations" ::= { intfConfig 19 } virtualUNIConfigEntry OBJECT-TYPE SYNTAX VirtualUNIConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index is the Interface and the Virutal UNI Interface" INDEX { virtualUNIIfIndex, virtualUNIVUNIId } ::= { virtualUNIConfigTable 1 } VirtualUNIConfigEntry ::= SEQUENCE { virtualUNIIfIndex IntfIndex, virtualUNIVUNIId INTEGER, virtualUNIVISupport INTEGER, virtualUNIMinVpi INTEGER, virtualUNIMaxVpi INTEGER, virtualUNIConfigRowStatus RowStatus, virtualUNIAddrType INTEGER, virtualUNISvcMinVpi INTEGER, virtualUNISvcMaxVpi INTEGER, virtualUNISvcMinVci INTEGER, virtualUNISvcMaxVci INTEGER, virtualUNIAdminStatus INTEGER, virtualUNIOperStatus INTEGER, virtualUNINwPrefix1 OCTET STRING, virtualUNIT303 Integer32, virtualUNIT308 Integer32, virtualUNIT309 Integer32, virtualUNIT310 Integer32, virtualUNIT313 Integer32, virtualUNIT316 Integer32, virtualUNIT317 Integer32, virtualUNIT322 Integer32, virtualUNIT398 Integer32, virtualUNIT399 Integer32, virtualUNIMyNeighborIpAddress IpAddress, virtualUNIMyNeighborIfName DisplayString, virtualUNIVpiSig INTEGER, virtualUNIVciSig INTEGER, virtualUNISignalingAdminStatus INTEGER, virtualUNISignalingOperStatus INTEGER, virtualUNIVpiIlmi INTEGER, virtualUNIVciIlmi INTEGER, virtualUNIMyIfName DisplayString, virtualUNIIlmiProtocolStatus INTEGER, virtualUNIIlmiOperStatus INTEGER, virtualUNIIlmiConfigProc INTEGER, virtualUNIIlmiConnectProc INTEGER, virtualUNIIlmiAttachPtProc INTEGER, virtualUNIIlmiSecureLinkProc INTEGER, virtualUNIIlmiAddrRegProc INTEGER, virtualUNIIlmiTimerS Integer32, virtualUNIIlmiTimerT Integer32, virtualUNIIlmiRetryK Integer32, virtualUNIIntfType INTEGER, virtualUNIUserAddress OCTET STRING, virtualUNIUserAddrOrgScope INTEGER , virtualUNISscopRxWndSz INTEGER } virtualUNIIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the first index to the Virtual UNI Interface table. Interface index will be of the form SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { virtualUNIConfigEntry 1 } virtualUNIVUNIId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual UNI number, second index to access the virtual UNI interface." DEFVAL { 1 } ::= { virtualUNIConfigEntry 2 } virtualUNIVISupport OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Virtual Interface (Traffic Shaping) is enabled or disabled on this VUNI. A Virtual Interface should already be configured befaore the traffic shaping can be enabled on this VUNI. If VISupport is disabled then all the connections on the VUNI can only be configured as UBR connections if this VUNI interface is on a VI enabled physical interface" DEFVAL { disabled } ::= { virtualUNIConfigEntry 3 } virtualUNIMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower value of the VPI range for this VUNI" ::= { virtualUNIConfigEntry 4 } virtualUNIMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper value of the VPI range for this VUNI" ::= { virtualUNIConfigEntry 5 } virtualUNIConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { virtualUNIConfigEntry 6 } virtualUNIAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), private(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "atm address type" DEFVAL { nsap } ::= { virtualUNIConfigEntry 7 } virtualUNISvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VPI for SVC connections." DEFVAL { 0 } ::= { virtualUNIConfigEntry 8 } virtualUNISvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VPI for SVC connections." DEFVAL { 0 } ::= { virtualUNIConfigEntry 9 } virtualUNISvcMinVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the VCI for SVC connections." DEFVAL { 32 } ::= { virtualUNIConfigEntry 10 } virtualUNISvcMaxVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of the VCI for SVC connections." DEFVAL { 255 } ::= { virtualUNIConfigEntry 11 } virtualUNIAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the VUNI out of service 'inService' means take the VUNI in service" DEFVAL { outOfService } ::= { virtualUNIConfigEntry 12 } virtualUNIOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the VUNI: 'outOfService' means the VUNI is out of service 'inService' means the VUNI is in service" DEFVAL { outOfService } ::= { virtualUNIConfigEntry 13 } virtualUNINwPrefix1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-write STATUS current DESCRIPTION "ATM Network Prefix 1" ::= { virtualUNIConfigEntry 14 } virtualUNIT303 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T303 value - seconds" DEFVAL { 4 } ::= { virtualUNIConfigEntry 15 } virtualUNIT308 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T308 value - seconds" DEFVAL { 30 } ::= { virtualUNIConfigEntry 16 } virtualUNIT309 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T309 value - seconds" DEFVAL { 10 } ::= { virtualUNIConfigEntry 17 } virtualUNIT310 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T310 value - seconds" DEFVAL { 10 } ::= { virtualUNIConfigEntry 18 } virtualUNIT313 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T313 value - User side only - seconds" DEFVAL { 4 } ::= { virtualUNIConfigEntry 19 } virtualUNIT316 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T316 value - seconds" DEFVAL { 120 } ::= { virtualUNIConfigEntry 20 } virtualUNIT317 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T317 value - seconds" DEFVAL { 60 } ::= { virtualUNIConfigEntry 21 } virtualUNIT322 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T322 value - seconds" DEFVAL { 4 } ::= { virtualUNIConfigEntry 22} virtualUNIT398 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T398 value - seconds" DEFVAL { 4 } ::= { virtualUNIConfigEntry 23 } virtualUNIT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { virtualUNIConfigEntry 24 } virtualUNIMyNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object can currently only be obtained by manual configuration." ::= { virtualUNIConfigEntry 25 } virtualUNIMyNeighborIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object can currently only be obtained by manual configuration." ::= { virtualUNIConfigEntry 27 } virtualUNIVpiSig OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the signalling channel for the UNI interface." DEFVAL { 0 } ::= { virtualUNIConfigEntry 28 } virtualUNIVciSig OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the signalling channel for the UNI interface." DEFVAL { 5 } ::= { virtualUNIConfigEntry 29 } virtualUNISignalingAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this VUNI interface." ::= { virtualUNIConfigEntry 30 } virtualUNISignalingOperStatus OBJECT-TYPE SYNTAX INTEGER { inService(1), outOfService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service" DEFVAL { outOfService } ::= { virtualUNIConfigEntry 31 } virtualUNIVpiIlmi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for the ilmi channel for the UNI interface." DEFVAL { 0 } ::= { virtualUNIConfigEntry 32 } virtualUNIVciIlmi OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for the ilmi channel for the UNI interface." DEFVAL { 16 } ::= { virtualUNIConfigEntry 33 } virtualUNIMyIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string." ::= { virtualUNIConfigEntry 34 } virtualUNIIlmiProtocolStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI." DEFVAL { disabled } ::= { virtualUNIConfigEntry 35 } virtualUNIIlmiOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up." DEFVAL { outOfService } ::= { virtualUNIConfigEntry 36 } virtualUNIIlmiConfigProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Configuration Procedure status." DEFVAL { disabled } ::= { virtualUNIConfigEntry 37 } virtualUNIIlmiConnectProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Connectivity Procedure status." DEFVAL { disabled } ::= { virtualUNIConfigEntry 38 } virtualUNIIlmiAttachPtProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Attachment Point Procedure status." DEFVAL { disabled } ::= { virtualUNIConfigEntry 39 } virtualUNIIlmiSecureLinkProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled." DEFVAL { disabled } ::= { virtualUNIConfigEntry 40 } virtualUNIIlmiAddrRegProc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI Address Registration Procedure status." DEFVAL { disabled } ::= { virtualUNIConfigEntry 41 } virtualUNIIlmiTimerS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer S (secs). Used to poll peer when link is down." DEFVAL { 1 } ::= { virtualUNIConfigEntry 42 } virtualUNIIlmiTimerT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T (secs). Used to poll peer when link is up." DEFVAL { 5 } ::= { virtualUNIConfigEntry 43 } virtualUNIIlmiRetryK OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retry K - number of timeouts before link is declared down." DEFVAL { 4 } ::= { virtualUNIConfigEntry 44 } virtualUNIIntfType OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "atm interface type" DEFVAL { network } ::= { virtualUNIConfigEntry 45 } virtualUNIUserAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(7)) MAX-ACCESS read-write STATUS current DESCRIPTION "ATM User Address" ::= { virtualUNIConfigEntry 46 } virtualUNIUserAddrOrgScope OBJECT-TYPE SYNTAX INTEGER { localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "ATM User Address Organizational scope" ::= { virtualUNIConfigEntry 47 } virtualUNISscopRxWndSz OBJECT-TYPE SYNTAX INTEGER (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "The receive window size for the SSCOP layer" DEFVAL { 32 } ::= { virtualUNIConfigEntry 48 } casConfig OBJECT IDENTIFIER ::= { intfConfig 20 } casConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CasConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for CAS trunk/line configuration." ::= { casConfig 1 } casConfigEntry OBJECT-TYPE SYNTAX CasConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for CAS trunk/line configuration." INDEX { casIfIndex } ::= { casConfigTable 1 } CasConfigEntry ::= SEQUENCE { casIfIndex IntfIndex, casAdminStatus INTEGER, casOperStatus INTEGER, casProtocolType INTEGER, casDirection INTEGER, casAddressingType INTEGER, casBitPatternType INTEGER, casGroupId INTEGER } casIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The channel ID (slot/port/channel) in SSPPCCC format associated with the CAS trunk/line." ::= { casConfigEntry 1 } casAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: outOfService-take the CAS trunk/line out of service, inService-take the CAS trunk/line in service, delete-remove/deconfigure the CAS trunk/line." DEFVAL { outOfService } ::= { casConfigEntry 2 } casOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the CAS trunk/line: outOfService-the CAS trunk/line is out of service, inService-the CAS trunk/line is in service." DEFVAL { outOfService } ::= { casConfigEntry 3 } casProtocolType OBJECT-TYPE SYNTAX INTEGER { wink-start(1), loop-start-network(2), loop-start-user(3), ground-start-network(4), ground-start-user(5), itu-t-r2(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of CAS protocol to be used. The protocol must match the one used on the other end of the trunk/line." DEFVAL { wink-start } ::= { casConfigEntry 4 } casDirection OBJECT-TYPE SYNTAX INTEGER { both(1), incoming(2), outgoing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The direction of traffic flow on this CAS trunk/line." DEFVAL { both } ::= { casConfigEntry 5 } casAddressingType OBJECT-TYPE SYNTAX INTEGER { dtmf(1), r1-mf(2), r2-mf(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The addressing type used for the CAS trunk/line. dtmf -- dual tone multifrequency r1-mf -- R1 multifrequency, r2-mf -- R2 multifrequency. Type of 're-mf' is valid only when casProtocolType is 'wink start', while 'r2-mf' is valid only when casProtocolType is 'itu-t r2' ." DEFVAL { dtmf } ::= { casConfigEntry 6 } casBitPatternType OBJECT-TYPE SYNTAX INTEGER { ab(1), abcd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of bit pattern used for supervisory signaling. The value is AB when SF framing is used, ABCD when ESF framing is used for DS1. In case of E1, the value is always ABCD." ::= { casConfigEntry 7 } casGroupId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The identifier to associate a group of CAS trunks/lines which have same reachability. When SG is disabled, it must be specified with a non-zero value. When SG is enabled, the value should be set to zero which indicate no routing performed based on the value." DEFVAL { 0 } ::= { casConfigEntry 8 } -- -- tone announcement server configuration table -- toneAnnceConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ToneAnnceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for the Tone Announcement Interface" ::= { intfConfig 21 } toneAnnceConfigEntry OBJECT-TYPE SYNTAX ToneAnnceConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for Tone Announcement interface" INDEX { toneAnnceIfIndex } ::= { toneAnnceConfigTable 1 } ToneAnnceConfigEntry ::= SEQUENCE { toneAnnceIfIndex IntfIndex, toneAnnceAdminStatus INTEGER, toneAnnceOperStatus INTEGER } toneAnnceIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { toneAnnceConfigEntry 1 } toneAnnceAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative action: 'outOfService' means take the interface out of service 'inService' means take the interface in service 'delete' remove/deconfigure the interface." DEFVAL { outOfService } ::= { toneAnnceConfigEntry 2 } toneAnnceOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the interface: 'outOfService' means the interface is out of service 'inService' means the interface is in service" DEFVAL { outOfService } ::= { toneAnnceConfigEntry 3 } -- GR303 Interface table gr303IntfConfig OBJECT IDENTIFIER ::= { intfConfig 22 } gr303IntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303IntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of GR303 interface configuration attributes" ::= { gr303IntfConfig 1 } gr303IntfConfigEntry OBJECT-TYPE SYNTAX Gr303IntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 interface configuration table" INDEX { gr303IntfId } ::= { gr303IntfConfigTable 1 } Gr303IntfConfigEntry ::= SEQUENCE { gr303IntfId Integer32, gr303TMCChannelId Integer32, gr303EOCChannelId Integer32, gr303IntfAdminStatus INTEGER, gr303IntfOperStatus INTEGER } gr303IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface ID (SSPPCCC)" ::= { gr303IntfConfigEntry 1 } gr303TMCChannelId OBJECT-TYPE SYNTAX Integer32 (0..24) MAX-ACCESS read-write STATUS current DESCRIPTION "TMC-Channel Number. If TMC Channel is set to 0 there will be no TMC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 24" DEFVAL { 0 } ::= { gr303IntfConfigEntry 2 } gr303EOCChannelId OBJECT-TYPE SYNTAX Integer32 (0..24) MAX-ACCESS read-write STATUS current DESCRIPTION "EOC-Channel Number. If EOC Channel is set to 0 there will be no EOC channel on the corresponding DS1. Generally the TMC channel should be specified on the one of the DS1's in a GR303 interface group and should be on DS0 no. 12" DEFVAL { 0 } ::= { gr303IntfConfigEntry 3 } gr303IntfAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2), delete (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "GR303 interface admin status" ::= { gr303IntfConfigEntry 4 } gr303IntfOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GR303 interface operational status" ::= { gr303IntfConfigEntry 5 } -- GR303 DS0 Channel Table gr303Ds0ChanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303Ds0ChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of GR303 DS0 Channel configuration attriburtes" ::= { gr303IntfConfig 2 } gr303Ds0ChanConfigEntry OBJECT-TYPE SYNTAX Gr303Ds0ChanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 DS0 Channel configuration table" INDEX { gr303Ds0ChanId } ::= { gr303Ds0ChanConfigTable 1 } Gr303Ds0ChanConfigEntry::= SEQUENCE { gr303Ds0ChanId INTEGER, gr303Ds0ChanAdminStatus INTEGER, gr303Ds0ChanOperStatus INTEGER } gr303Ds0ChanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "GR303 DS0 Chan ID (SSPPCCC)" ::= { gr303Ds0ChanConfigEntry 1 } gr303Ds0ChanAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GR303 Ds0 Chan admin status" ::= { gr303Ds0ChanConfigEntry 2 } gr303Ds0ChanOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (1), inService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "GR303 Ds0 Chan operational status" ::= { gr303Ds0ChanConfigEntry 3 } -- GR303 Interface Group Table (GR303IG) gr303IgConfig OBJECT IDENTIFIER ::= { gr303Config 1} gr303IgConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303IgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of GR303 group configuration" ::= { gr303IgConfig 1 } gr303IgConfigEntry OBJECT-TYPE SYNTAX Gr303IgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 group configuration" INDEX { gr303IgId } ::= { gr303IgConfigTable 1 } Gr303IgConfigEntry::= SEQUENCE { gr303IgId INTEGER, gr303IgRowStatus RowStatus, gr303IgAdminStatus INTEGER, gr303IgPrimaryTMCChanIntfId IntfIndex, gr303IgPrimaryEOCChanIntfId IntfIndex, gr303IgBackupTMCChanIntfId IntfIndex, gr303IgBackupEOCChanIntfId IntfIndex, gr303IgPrimaryTMCStatus INTEGER, gr303IgPrimaryEOCStatus INTEGER, gr303IgBackupTMCStatus INTEGER, gr303IgBackupEOCStatus INTEGER, gr303IgTMCProtSwitchProvState INTEGER, gr303IgEOCProtSwitchProvState INTEGER, gr303IgTMCProtSwitchCommand INTEGER, gr303IgEOCProtSwitchCommand INTEGER, gr303IgLocalDigitalSwitchType INTEGER, gr303IgLocalDigitalSwitchVersion INTEGER } gr303IgId OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is used as an index into GR303IG table which recognizes GR303 Interface Group" ::= { gr303IgConfigEntry 1 } gr303IgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "GR303IG config entry row status" ::= { gr303IgConfigEntry 2 } gr303IgAdminStatus OBJECT-TYPE SYNTAX INTEGER { inService (1), outOfService (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative status of the GR303IG" DEFVAL { outOfService } ::= { gr303IgConfigEntry 3 } gr303IgPrimaryTMCChanIntfId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Primary TMC channel Interface Id in SSPPCCC format" ::= { gr303IgConfigEntry 4 } gr303IgPrimaryEOCChanIntfId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Primary EOC channel Interface Id in SSPPCCC format" ::= { gr303IgConfigEntry 5 } gr303IgBackupTMCChanIntfId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Backup TMC channel Interface Id in SSPPCCC format " ::= { gr303IgConfigEntry 6 } gr303IgBackupEOCChanIntfId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Backup EOC channel Interface Id in SSPPCCC format" ::= { gr303IgConfigEntry 7 } gr303IgPrimaryTMCStatus OBJECT-TYPE SYNTAX INTEGER { standby-OutOfService (1), standby-InService (2), active-OutOfService (3), active-InService (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Primary TMC channel Status" ::= { gr303IgConfigEntry 8 } gr303IgPrimaryEOCStatus OBJECT-TYPE SYNTAX INTEGER { standby-OutOfService (1), standby-InService (2), active-OutOfService (3), active-InService (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Primary EOC channel Status" ::= { gr303IgConfigEntry 9 } gr303IgBackupTMCStatus OBJECT-TYPE SYNTAX INTEGER { standby-OutOfService (1), standby-InService (2), active-OutOfService (3), active-InService (4), null (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Backup TMC channel Status.Value null(5) Indicates that the Backup TMC has not been configured." ::= { gr303IgConfigEntry 10 } gr303IgBackupEOCStatus OBJECT-TYPE SYNTAX INTEGER { standby-OutOfService (1), standby-InService (2), active-OutOfService (3), active-InService (4), null (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Backup EOC channel Status.Value null(5) Indicates that the Backup EOC has not been configured." ::= { gr303IgConfigEntry 11 } gr303IgTMCProtSwitchProvState OBJECT-TYPE SYNTAX INTEGER { pps-inhibit (1), pps-enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lock/Unlock the protection switch" DEFVAL { pps-enable } ::= { gr303IgConfigEntry 12 } gr303IgEOCProtSwitchProvState OBJECT-TYPE SYNTAX INTEGER { pps-inhibit (1), pps-enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Lock/Unlock the protection switch" DEFVAL { pps-enable } ::= { gr303IgConfigEntry 13 } gr303IgTMCProtSwitchCommand OBJECT-TYPE SYNTAX INTEGER { noAction (1), normalSwitchToBackup (2), normalSwitchToPrimary (3), forcedSwitchToBackup (4), forcedSwitchToPrimary (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "User command to do path protection switch" DEFVAL { noAction } ::= { gr303IgConfigEntry 14 } gr303IgEOCProtSwitchCommand OBJECT-TYPE SYNTAX INTEGER { noAction (1), normalSwitchToBackup (2), normalSwitchToPrimary (3), forcedSwitchToBackup (4), forcedSwitchToPrimary (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "User command to do path protection switch" DEFVAL { noAction } ::= { gr303IgConfigEntry 15 } gr303IgLocalDigitalSwitchType OBJECT-TYPE SYNTAX INTEGER { lucent-5ess (1), nortel-dms (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LDS (IDT) type" DEFVAL { lucent-5ess } ::= { gr303IgConfigEntry 16 } gr303IgLocalDigitalSwitchVersion OBJECT-TYPE SYNTAX INTEGER { lucent-5ess-version-1 (1), nortel-dms-version-1 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LDS (IDT)Version" DEFVAL { lucent-5ess-version-1 } ::= { gr303IgConfigEntry 17 } -- GR303 IG interface table (table of grouped interfaces) gr303IgIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303IgIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of interface attributes in an GR303IG" ::= { gr303IgConfig 2 } gr303IgIntfConfigEntry OBJECT-TYPE SYNTAX Gr303IgIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 Access Arrangement Interface configuration" INDEX { gr303IntfIgId , gr303IgIntfId} ::= { gr303IgIntfConfigTable 1 } Gr303IgIntfConfigEntry::= SEQUENCE { gr303IntfIgId INTEGER, gr303IgIntfId INTEGER, gr303IgIntfPhysId INTEGER, gr303IgIntfNetId INTEGER, gr303IgIntfRowStatus RowStatus } gr303IntfIgId OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is used as an index into GR303Ig table which recognizes GR303 Interface Group. This is used as a first index into this interface table." ::= { gr303IgIntfConfigEntry 1 } gr303IgIntfId OBJECT-TYPE SYNTAX INTEGER (1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is used as an index into IG interface table which recognizes GR303 Ig interfaces. This is used as a second index into this table" ::= { gr303IgIntfConfigEntry 2 } gr303IgIntfPhysId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface's Physical ID (SSPPCCC)" ::= { gr303IgIntfConfigEntry 3 } gr303IgIntfNetId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "gr303Ig Interface (DS1) Net Id assigned by the network" ::= { gr303IgIntfConfigEntry 4 } gr303IgIntfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "GR303IG interface entry row status - row status can not be made active until all the values are set" ::= { gr303IgIntfConfigEntry 5 } -- GR303 LAPD Table gr303LapdConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303LapdConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of LAPD attributes in an GR303IG" ::= { gr303IgConfig 4 } gr303LapdConfigEntry OBJECT-TYPE SYNTAX Gr303LapdConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for LAPD attributes in a GR303IG" INDEX { gr303LapdIgId } ::= { gr303LapdConfigTable 1 } Gr303LapdConfigEntry::= SEQUENCE { gr303LapdIgId INTEGER, gr303T200 Integer32, gr303T203 Integer32, gr303N200 Integer32, gr303K Integer32 } gr303LapdIgId OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "GR303IG Number index which recognizes GR303 Interface group" ::= { gr303LapdConfigEntry 1 } gr303T200 OBJECT-TYPE SYNTAX INTEGER(100..350) MAX-ACCESS read-write STATUS current DESCRIPTION "value of Lapd T200 timer in miliseconds in step size of 50 ms" DEFVAL { 150 } ::= { gr303LapdConfigEntry 2 } gr303T203 OBJECT-TYPE SYNTAX INTEGER(10..300) MAX-ACCESS read-write STATUS current DESCRIPTION "value of Lapd T203 timer in seconds" DEFVAL { 30 } ::= { gr303LapdConfigEntry 3 } gr303N200 OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of retransmissions" DEFVAL { 3 } ::= { gr303LapdConfigEntry 4 } gr303K OBJECT-TYPE SYNTAX INTEGER(1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of outstanding I frames - Lapd - window size." DEFVAL { 7 } ::= { gr303LapdConfigEntry 5 } -- GR303 TMC Table gr303TMCConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303TMCConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Layer 3 attributes in an GR303IG" ::= { gr303IgConfig 5 } gr303TMCConfigEntry OBJECT-TYPE SYNTAX Gr303TMCConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 Access Arrangement Layer3 parameters configuration" INDEX { gr303TMCIgId } ::= { gr303TMCConfigTable 1 } Gr303TMCConfigEntry::= SEQUENCE { gr303TMCIgId INTEGER, gr303TMCT303 INTEGER, gr303TMCT396 INTEGER } gr303TMCIgId OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "GR303IG Number index which recognizes GR303 Interface group" ::= { gr303TMCConfigEntry 1 } gr303TMCT303 OBJECT-TYPE SYNTAX INTEGER(700..4700) MAX-ACCESS read-write STATUS current DESCRIPTION "value of TMC T303 timer in miliseconds with a step size of 500 ms" DEFVAL { 700 } ::= { gr303TMCConfigEntry 2 } gr303TMCT396 OBJECT-TYPE SYNTAX INTEGER(700..14700) MAX-ACCESS read-write STATUS current DESCRIPTION "value of TMC T396 timer in miliseconds with a step size of 1000 ms" DEFVAL { 14700 } ::= { gr303TMCConfigEntry 3 } -- GR303 IG stats table gr303IgStats OBJECT IDENTIFIER ::= { gr303Stats 1 } gr303IgStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303IgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of GR303 GR303IG based stats attributes" ::= { gr303IgStats 1 } gr303IgStatsEntry OBJECT-TYPE SYNTAX Gr303IgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for GR303 GR303IG based stats" INDEX { gr303IgStatsIgId } ::= { gr303IgStatsTable 1 } Gr303IgStatsEntry ::= SEQUENCE { gr303IgStatsIgId INTEGER, gr303IgStatsCurrentInCalls Integer32, gr303IgStatsCurrentOutCalls Integer32, gr303IgStatsOutCallSuccessful Integer32, gr303IgStatsOutCallFailed Integer32, gr303IgStatsInCallSuccessful Integer32, gr303IgStatsInCallFailed Integer32, gr303IgStatsReset INTEGER } gr303IgStatsIgId OBJECT-TYPE SYNTAX INTEGER (1..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is used as an index into GR303 Ig table which recognizes GR303 Interface Group Interface group" ::= { gr303IgStatsEntry 1 } gr303IgStatsCurrentInCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Currently established incoming calls" ::= { gr303IgStatsEntry 2 } gr303IgStatsCurrentOutCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Currently established outgoing calls" ::= { gr303IgStatsEntry 3 } gr303IgStatsOutCallSuccessful OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number successful outgoing calls" ::= { gr303IgStatsEntry 4 } gr303IgStatsOutCallFailed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Failed outgoing calls" ::= { gr303IgStatsEntry 5 } gr303IgStatsInCallSuccessful OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number successful incoming calls" ::= { gr303IgStatsEntry 6 } gr303IgStatsInCallFailed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Failed incoming calls" ::= { gr303IgStatsEntry 7 } gr303IgStatsReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "gr303Ig reset statistics button" ::= { gr303IgStatsEntry 8 } -- The Connection Configuration Group connectionConfig atmPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PVC atm virtual channel connections" ::= { connectionConfig 1 } atmPvcVccEntry OBJECT-TYPE SYNTAX AtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm PVC VCC connections" INDEX { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } ::= { atmPvcVccTable 1 } AtmPvcVccEntry ::= SEQUENCE { atmPvcVccIfA IntfIndex, atmPvcVccVpiA INTEGER, atmPvcVccVciA INTEGER, atmPvcVccIfB IntfIndex, atmPvcVccVpiB INTEGER, atmPvcVccVciB INTEGER, atmPvcVccServiceTypeA2B INTEGER, atmPvcVccSarTypeA2B INTEGER, atmPvcVccPeakCellRateA2B Integer32, atmPvcVccSusCellRateA2B Integer32, atmPvcVccMaxBurstSizeA2B Integer32, atmPvcVccServiceTypeB2A INTEGER, atmPvcVccSarTypeB2A INTEGER, atmPvcVccPeakCellRateB2A Integer32, atmPvcVccSusCellRateB2A Integer32, atmPvcVccMaxBurstSizeB2A Integer32, atmPvcVccType INTEGER, atmPvcVccFlow INTEGER, atmPvcVccRowStatus RowStatus, atmPvcVccFrwdErrCorrectionA2B INTEGER, atmPvcVccFrwdErrCorrectionB2A INTEGER, atmPvcVccConnectionStatus INTEGER, atmPvcVccOamStatus INTEGER, atmPvcVccDualHomed INTEGER, atmPvcVccViA INTEGER, atmPvcVccViB INTEGER, atmPvcVccCnfrmTypeA2B INTEGER, atmPvcVccCnfrmTypeB2A INTEGER, atmPvcVccVUNIA INTEGER, atmPvcVccVUNIB INTEGER, atmPvcVccOamStatusB INTEGER, atmPvcVccOAMConnEndPtStatusA INTEGER, atmPvcVccOAMConnEndPtStatusB INTEGER, atmPvcVccOAMConnSegEndPtStatusA INTEGER, atmPvcVccOAMConnSegEndPtStatusB INTEGER, atmPvcVccMfsA2B INTEGER, atmPvcVccMfsB2A INTEGER, atmPvcVccConnFailureCauseA AtmConnFailureCause, atmPvcVccConnFailureCauseB AtmConnFailureCause, atmPvcVccTrafficShapingA2B INTEGER, atmPvcVccTrafficShapingB2A INTEGER } atmPvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmPvcVccEntry 1 } atmPvcVccVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmPvcVccEntry 2 } atmPvcVccVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmPvcVccEntry 3 } atmPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmPvcVccEntry 4 } atmPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmPvcVccEntry 5 } atmPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmPvcVccEntry 6 } atmPvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10), gfr2(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmPvcVccEntry 7 } atmPvcVccSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in atm adaption" DEFVAL { null } ::= { atmPvcVccEntry 8 } atmPvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - side A, in cell per second" DEFVAL { 1 } ::= { atmPvcVccEntry 10 } atmPvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second" DEFVAL { 1 } ::= { atmPvcVccEntry 11 } atmPvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cells" DEFVAL { 1 } ::= { atmPvcVccEntry 12 } atmPvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10), gfr2(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmPvcVccEntry 13 } atmPvcVccSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "sar type used in atm adaption" DEFVAL { null } ::= { atmPvcVccEntry 14 } atmPvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, in cell per second." DEFVAL { 1 } ::= { atmPvcVccEntry 16 } atmPvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, in cell per second." DEFVAL { 1 } ::= { atmPvcVccEntry 17 } atmPvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, in cells." DEFVAL { 1 } ::= { atmPvcVccEntry 18 } atmPvcVccType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of connection" DEFVAL { nonsecured } ::= { atmPvcVccEntry 20 } atmPvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), pointToMultipointA2B(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of flow" DEFVAL { duplex } ::= { atmPvcVccEntry 21 } atmPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { atmPvcVccEntry 22 } atmPvcVccFrwdErrCorrectionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme" DEFVAL { none } ::= { atmPvcVccEntry 23 } atmPvcVccFrwdErrCorrectionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme" DEFVAL { none } ::= { atmPvcVccEntry 24 } atmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { atmPvcVccEntry 25 } atmPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection." DEFVAL { unsupp } ::= { atmPvcVccEntry 26 } atmPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { atmPvcVccEntry 27 } atmPvcVccViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmPvcVccEntry 28 } atmPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmPvcVccEntry 29 } atmPvcVccCnfrmTypeA2B OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmPvcVccEntry 30 } atmPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one_bucket_notag_0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two_bucket_notag_0plus1_0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two_bucket_notag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two_bucket_tag_0plus1_0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best_effort_tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmPvcVccEntry 31 } atmPvcVccVUNIA OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." ::= { atmPvcVccEntry 32 } atmPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." ::= { atmPvcVccEntry 33 } atmPvcVccOamStatusB OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows." DEFVAL { unsupp } ::= { atmPvcVccEntry 34 } atmPvcVccOAMConnEndPtStatusA OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint side A status. Valid only at connection endpoint." ::= { atmPvcVccEntry 35 } atmPvcVccOAMConnEndPtStatusB OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint side B status. Valid only at connection endpoint." ::= { atmPvcVccEntry 36 } atmPvcVccOAMConnSegEndPtStatusA OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint side A status. Valid only at segment endpoints." ::= { atmPvcVccEntry 37 } atmPvcVccOAMConnSegEndPtStatusB OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint side B status. Valid only at segment endpoints." ::= { atmPvcVccEntry 38 } atmPvcVccMfsA2B OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic for A2B dir" DEFVAL { 1 } ::= { atmPvcVccEntry 39 } atmPvcVccMfsB2A OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic for B2A dir" DEFVAL { 1 } ::= { atmPvcVccEntry 40 } atmPvcVccConnFailureCauseA OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { atmPvcVccEntry 41 } atmPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { atmPvcVccEntry 42 } atmPvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmPvcVccEntry 43 } atmPvcVccTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmPvcVccEntry 44 } atmPvcVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmPvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of PVC atm virtual path connections" ::= { connectionConfig 2 } atmPvcVpcEntry OBJECT-TYPE SYNTAX AtmPvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm connections" INDEX { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } ::= { atmPvcVpcTable 1 } AtmPvcVpcEntry ::= SEQUENCE { atmPvcVpcIfA IntfIndex, atmPvcVpcVpiA INTEGER, atmPvcVpcIfB IntfIndex, atmPvcVpcVpiB INTEGER, atmPvcVpcServiceTypeA2B INTEGER, atmPvcVpcSarTypeA2B INTEGER, atmPvcVpcPeakCellRateA2B Integer32, atmPvcVpcSusCellRateA2B Integer32, atmPvcVpcMaxBurstSizeA2B Integer32, atmPvcVpcServiceTypeB2A INTEGER, atmPvcVpcSarTypeB2A INTEGER, atmPvcVpcPeakCellRateB2A Integer32, atmPvcVpcSusCellRateB2A Integer32, atmPvcVpcMaxBurstSizeB2A Integer32, atmPvcVpcType INTEGER, atmPvcVpcFlow INTEGER, atmPvcVpcRowStatus RowStatus, atmPvcVpcConnectionStatus INTEGER, atmPvcVpcOamStatus INTEGER, atmPvcVpcDualHomed INTEGER, atmPvcVpcViA INTEGER, atmPvcVpcViB INTEGER, atmPvcVpcCnfrmTypeA2B INTEGER, atmPvcVpcCnfrmTypeB2A INTEGER, atmPvcVpcVUNIA INTEGER, atmPvcVpcVUNIB INTEGER, atmPvcVpcOamStatusB INTEGER, atmPvcVpcOAMConnEndPtStatusA INTEGER, atmPvcVpcOAMConnEndPtStatusB INTEGER, atmPvcVpcOAMConnSegEndPtStatusA INTEGER, atmPvcVpcOAMConnSegEndPtStatusB INTEGER, atmPvcVpcConnFailureCauseA AtmConnFailureCause, atmPvcVpcConnFailureCauseB AtmConnFailureCause, atmPvcVpcTrafficShapingA2B INTEGER, atmPvcVpcTrafficShapingB2A INTEGER } atmPvcVpcIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmPvcVpcEntry 1 } atmPvcVpcVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095." ::= { atmPvcVpcEntry 2 } atmPvcVpcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of an ATM-to-ATM PVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmPvcVpcEntry 3 } atmPvcVpcVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B of an ATM-to-ATM PVC VPC connection. Valid range is a number between 0 and 4095." ::= { atmPvcVpcEntry 4 } atmPvcVpcServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmPvcVpcEntry 5 } atmPvcVpcSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR Type" DEFVAL { null } ::= { atmPvcVpcEntry 6 } atmPvcVpcPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side A, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 8 } atmPvcVpcSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 9 } atmPvcVpcMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 10 } atmPvcVpcServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmPvcVpcEntry 11 } atmPvcVpcSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR Type" DEFVAL { null } ::= { atmPvcVpcEntry 12 } atmPvcVpcPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 14 } atmPvcVpcSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 15 } atmPvcVpcMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, in cell per second." DEFVAL { 1 } ::= { atmPvcVpcEntry 16 } atmPvcVpcType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "security feature type" DEFVAL { nonsecured } ::= { atmPvcVpcEntry 17 } atmPvcVpcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), pointToMultipointA2B(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "flow type" DEFVAL { duplex } ::= { atmPvcVpcEntry 18 } atmPvcVpcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { atmPvcVpcEntry 19 } atmPvcVpcConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { atmPvcVpcEntry 20 } atmPvcVpcOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 5 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. Seg-Pt: A side is only a segment point, therefore it will only respond to maintenance OAM cells and not fault cells. End-Seg-Pt: A side is both an end point and a segment point. Intermediate-Pt: It will only generate AIS during local failure. For ATM-to-ATM connections the OAM status will be symmetric on both sides of the connection." DEFVAL { unsupp } ::= { atmPvcVpcEntry 21 } atmPvcVpcDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { atmPvcVpcEntry 22 } atmPvcVpcViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmPvcVpcEntry 23 } atmPvcVpcViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmPvcVpcEntry 24 } atmPvcVpcCnfrmTypeA2B OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmPvcVpcEntry 25 } atmPvcVpcCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmPvcVpcEntry 26 } atmPvcVpcVUNIA OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI Id to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmPvcVpcEntry 27 } atmPvcVpcVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI Id to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmPvcVpcEntry 28 } atmPvcVpcOamStatusB OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), seg-Pt(3), end-Seg-Pt(4), intermediate-Pt(5), intra-Segment-Pt(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Oam monitoring status of side B of an internal connection. Refer to ITU I.610 and Bellcore GR1248-CORE for definitions. The 6 possible states are: Unsupp: No OAM cell monitoring or generation enabled. All OAM flows are transparently passed through. End-Pt: Connection endPoint, segment flows are discarded. Seg-Pt: Segment endPoint. End-Seg-Pt: Connection endPoint that is also a segment endPoint. Intermediate-Pt: Connecting point, that is outside any segment. Generates only ete flows. Intra-Segment-Pt: Connecting point with a segment. Generates ete as well as segment flows." DEFVAL { unsupp } ::= { atmPvcVpcEntry 29 } atmPvcVpcOAMConnEndPtStatusA OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint side A status. Valid only at connection endpoint." ::= { atmPvcVpcEntry 30 } atmPvcVpcOAMConnEndPtStatusB OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint side B status. Valid only at connection endpoint." ::= { atmPvcVpcEntry 31 } atmPvcVpcOAMConnSegEndPtStatusA OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint side A status. Valid only at segment/connection endpoints." ::= { atmPvcVpcEntry 32 } atmPvcVpcOAMConnSegEndPtStatusB OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint side B status. Valid only at segment/connection endpoints." ::= { atmPvcVpcEntry 33 } atmPvcVpcConnFailureCauseA OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { atmPvcVpcEntry 34 } atmPvcVpcConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { atmPvcVpcEntry 35 } atmPvcVpcTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmPvcVpcEntry 36 } atmPvcVpcTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmPvcVpcEntry 37 } atmSvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of atm connections" ::= { connectionConfig 3 } atmSvcVccEntry OBJECT-TYPE SYNTAX AtmSvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm connections" INDEX { atmSvcVccIfA, atmSvcVccVpiA, atmSvcVccVciA, atmSvcVccIfB, atmSvcVccVpiB, atmSvcVccVciB } ::= { atmSvcVccTable 1 } AtmSvcVccEntry ::= SEQUENCE { atmSvcVccIfA IntfIndex, atmSvcVccVpiA INTEGER, atmSvcVccVciA INTEGER, atmSvcVccIfB IntfIndex, atmSvcVccVpiB INTEGER, atmSvcVccVciB INTEGER, atmSvcVccServiceTypeA2B INTEGER, atmSvcVccSarTypeA2B INTEGER, atmSvcVccPeakCellRateA2B Integer32, atmSvcVccSusCellRateA2B Integer32, atmSvcVccMaxBurstSizeA2B Integer32, atmSvcVccServiceTypeB2A INTEGER, atmSvcVccSarTypeB2A INTEGER, atmSvcVccPeakCellRateB2A Integer32, atmSvcVccSusCellRateB2A Integer32, atmSvcVccMaxBurstSizeB2A Integer32, atmSvcVccFlow INTEGER, atmSvcVccType INTEGER, atmSvcVccConnectionStatus INTEGER, atmSvcVccViA INTEGER, atmSvcVccViB INTEGER, atmSvcVccCnfrmTypeA2B INTEGER, atmSvcVccCnfrmTypeB2A INTEGER ,atmSvcVccVUNIA INTEGER, atmSvcVccVUNIB INTEGER ,atmSvcVccTrafficShapingA2B INTEGER, atmSvcVccTrafficShapingB2A INTEGER } atmSvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmSvcVccEntry 1 } atmSvcVccVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm path identifier - side A" ::= { atmSvcVccEntry 2 } atmSvcVccVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm channel identifier - side A" ::= { atmSvcVccEntry 3 } atmSvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { atmSvcVccEntry 4 } atmSvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm path identifier - side B" ::= { atmSvcVccEntry 5 } atmSvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm channel identifier - side B" ::= { atmSvcVccEntry 6 } atmSvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmSvcVccEntry 7 } atmSvcVccSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "sar type - A to B direction" DEFVAL { null } ::= { atmSvcVccEntry 8 } atmSvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "peak rate - side A" DEFVAL { 1 } ::= { atmSvcVccEntry 10 } atmSvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "sustained rate - side A" DEFVAL { 1 } ::= { atmSvcVccEntry 11 } atmSvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "maximum burst size - side A" DEFVAL { 1 } ::= { atmSvcVccEntry 12 } atmSvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { atmSvcVccEntry 13 } atmSvcVccSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "sar type - B to A direction" DEFVAL { null } ::= { atmSvcVccEntry 14 } atmSvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "peak rate - side B" DEFVAL { 1 } ::= { atmSvcVccEntry 16 } atmSvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "sustained rate - side B" DEFVAL { 1 } ::= { atmSvcVccEntry 17 } atmSvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "maximum burst size - side B" DEFVAL { 1 } ::= { atmSvcVccEntry 18 } atmSvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), pointToMultipoint(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "flow type" DEFVAL { duplex } ::= { atmSvcVccEntry 19 } atmSvcVccType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "type of connection" DEFVAL { nonsecured } ::= { atmSvcVccEntry 20 } atmSvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { atmSvcVccEntry 21 } atmSvcVccViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmSvcVccEntry 22 } atmSvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmSvcVccEntry 23 } atmSvcVccCnfrmTypeA2B OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmSvcVccEntry 24 } atmSvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { atmSvcVccEntry 25 } atmSvcVccVUNIA OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmSvcVccEntry 26 } atmSvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmSvcVccEntry 27 } atmSvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmSvcVccEntry 28 } atmSvcVccTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmSvcVccEntry 29 } ipAtmAppPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAtmAppPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table about in-band management atm connection entries." ::= { connectionConfig 4 } ipAtmAppPvcVccEntry OBJECT-TYPE SYNTAX IpAtmAppPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of in-band management atm connection attribution." INDEX { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } ::= { ipAtmAppPvcVccTable 1 } IpAtmAppPvcVccEntry ::= SEQUENCE { ipAtmAppPvcVccDestAddrA IpAddress, ipAtmAppPvcVccSubnetMaskA IpAddress, ipAtmAppPvcVccIfB Integer32, ipAtmAppPvcVccVpiB INTEGER, ipAtmAppPvcVccVciB INTEGER, ipAtmAppPvcVccServiceTypeA2B INTEGER, ipAtmAppPvcVccServiceTypeB2A INTEGER, ipAtmAppPvcVccPeakCellRateB2A Integer32, ipAtmAppPvcVccSusCellRateB2A Integer32, ipAtmAppPvcVccMaxBurstSizeB2A Integer32, ipAtmAppPvcVccType INTEGER, ipAtmAppPvcVccRowStatus RowStatus, ipAtmAppPvcVccConnectionStatus INTEGER, ipAtmAppPvcVccDualHomed INTEGER, ipAtmAppPvcVccViB INTEGER, ipAtmAppPvcVccCnfrmTypeB2A INTEGER, ipAtmAppPvcVccVUNIB INTEGER, ipAtmAppPvcVccMfsB2A INTEGER, ipAtmAppPvcVccConnFailureCauseB AtmConnFailureCause, ipAtmAppPvcVccTrafficShapingA2B INTEGER, ipAtmAppPvcVccOamStatus INTEGER } ipAtmAppPvcVccDestAddrA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination IP address of an in-band management- atm connection. Value is and IP address." ::= { ipAtmAppPvcVccEntry 1 } ipAtmAppPvcVccSubnetMaskA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subnet mask of the destination IP address. Value is an IP address." ::= { ipAtmAppPvcVccEntry 2 } ipAtmAppPvcVccIfB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of an in-band management-atm connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { ipAtmAppPvcVccEntry 3 } ipAtmAppPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 4095." ::= { ipAtmAppPvcVccEntry 4 } ipAtmAppPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of an in-band management-atm connection. Valid range is a number between 0 and 65535." ::= { ipAtmAppPvcVccEntry 5 } ipAtmAppPvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-express(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type from side A to B" DEFVAL { ubr } ::= { ipAtmAppPvcVccEntry 6 } ipAtmAppPvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-express(2), gfr2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type from side B to A" DEFVAL { ubr } ::= { ipAtmAppPvcVccEntry 7 } ipAtmAppPvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B" DEFVAL { 1 } ::= { ipAtmAppPvcVccEntry 8 } ipAtmAppPvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B" DEFVAL { 1 } ::= { ipAtmAppPvcVccEntry 9 } ipAtmAppPvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B" DEFVAL { 1 } ::= { ipAtmAppPvcVccEntry 10 } ipAtmAppPvcVccType OBJECT-TYPE SYNTAX INTEGER { primary(0), backup(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated in-band management atm connection type." DEFVAL { primary } ::= { ipAtmAppPvcVccEntry 11 } ipAtmAppPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { ipAtmAppPvcVccEntry 12 } ipAtmAppPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { ipAtmAppPvcVccEntry 13 } ipAtmAppPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { ipAtmAppPvcVccEntry 14 } ipAtmAppPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmAppPvcVccEntry 15 } ipAtmAppPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { ipAtmAppPvcVccEntry 16 } ipAtmAppPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmAppPvcVccEntry 17 } ipAtmAppPvcVccMfsB2A OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic" DEFVAL { 1 } ::= { ipAtmAppPvcVccEntry 18 } ipAtmAppPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { ipAtmAppPvcVccEntry 19 } ipAtmAppPvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { ipAtmAppPvcVccEntry 20 } ipAtmAppPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint." DEFVAL { unsupp } ::= { ipAtmAppPvcVccEntry 21 } ipAtmAppSvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAtmAppSvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SVC VCC connection entries" ::= { connectionConfig 5 } ipAtmAppSvcVccEntry OBJECT-TYPE SYNTAX IpAtmAppSvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of SVC VCC connection attribution." INDEX { ipAtmAppSvcVccDestAddrA, ipAtmAppSvcVccSubnetMaskA, ipAtmAppSvcVccIfB, ipAtmAppSvcVccVpiB, ipAtmAppSvcVccVciB } ::= { ipAtmAppSvcVccTable 1 } IpAtmAppSvcVccEntry ::= SEQUENCE { ipAtmAppSvcVccDestAddrA IpAddress, ipAtmAppSvcVccSubnetMaskA IpAddress, ipAtmAppSvcVccIfB Integer32, ipAtmAppSvcVccVpiB INTEGER, ipAtmAppSvcVccVciB INTEGER, ipAtmAppSvcVccServiceTypeA2B INTEGER, ipAtmAppSvcVccServiceTypeB2A INTEGER, ipAtmAppSvcVccPeakCellRateB2A Integer32, ipAtmAppSvcVccSusCellRateB2A Integer32, ipAtmAppSvcVccMaxBurstSizeB2A Integer32, ipAtmAppSvcVccType INTEGER, ipAtmAppSvcVccConnectionStatus INTEGER, ipAtmAppSvcVccViB INTEGER, ipAtmAppSvcVccCnfrmTypeB2A INTEGER ,ipAtmAppSvcVccVUNIB INTEGER ,ipAtmAppSvcVccTrafficShapingA2B INTEGER } ipAtmAppSvcVccDestAddrA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination IP address,value is IP address." ::= { ipAtmAppSvcVccEntry 1 } ipAtmAppSvcVccSubnetMaskA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subnet mask of the destination IP address. Value is an IP address." ::= { ipAtmAppSvcVccEntry 2 } ipAtmAppSvcVccIfB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index (slot/port/channel) SSPPCCC" ::= { ipAtmAppSvcVccEntry 3 } ipAtmAppSvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm path identifier - side B" ::= { ipAtmAppSvcVccEntry 4 } ipAtmAppSvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "atm channel identifier - side B" ::= { ipAtmAppSvcVccEntry 5 } ipAtmAppSvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-express(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type from side A to B." DEFVAL { ubr } ::= { ipAtmAppSvcVccEntry 6 } ipAtmAppSvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-express(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type from side B to A." DEFVAL { ubr } ::= { ipAtmAppSvcVccEntry 7 } ipAtmAppSvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "peak rate - side B" DEFVAL { 1 } ::= { ipAtmAppSvcVccEntry 8 } ipAtmAppSvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "sustained rate - side B" DEFVAL { 1 } ::= { ipAtmAppSvcVccEntry 9 } ipAtmAppSvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "maximum burst size - side B" DEFVAL { 1 } ::= { ipAtmAppSvcVccEntry 10 } ipAtmAppSvcVccType OBJECT-TYPE SYNTAX INTEGER { primary(0), backup(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of using SVC VCC connection." DEFVAL { primary } ::= { ipAtmAppSvcVccEntry 11 } ipAtmAppSvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { ipAtmAppSvcVccEntry 12 } ipAtmAppSvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmAppSvcVccEntry 13 } ipAtmAppSvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { ipAtmAppSvcVccEntry 14 } ipAtmAppSvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmAppSvcVccEntry 15 } ipAtmAppSvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { ipAtmAppSvcVccEntry 16 } cirEmAtmPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Circuit Emulation to ATM VCCs" ::= { connectionConfig 6 } cirEmAtmPvcVccEntry OBJECT-TYPE SYNTAX CirEmAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of circuit emulation to atm connections." INDEX { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } ::= { cirEmAtmPvcVccTable 1 } CirEmAtmPvcVccEntry ::= SEQUENCE { cirEmAtmPvcVccIfA IntfIndex, cirEmAtmPvcVccIfB IntfIndex, cirEmAtmPvcVccVpiB INTEGER, cirEmAtmPvcVccVciB INTEGER, cirEmAtmPvcVccServiceType INTEGER, cirEmAtmPvcVccVoiceCompressionA2B INTEGER, cirEmAtmPvcVccSilenceDetectionA2B INTEGER, cirEmAtmPvcVccEchoCancellationA2B INTEGER, cirEmAtmPvcVccFlow INTEGER, cirEmAtmPvcVccRowStatus RowStatus, cirEmAtmPvcVccCngToneDetectionA2B INTEGER, cirEmAtmPvcVccCodingTranslationA2B INTEGER, cirEmAtmPvcVccVoiceCompressionB2A INTEGER, cirEmAtmPvcVccSilenceDetectionB2A INTEGER, cirEmAtmPvcVccEchoCancellationB2A INTEGER, cirEmAtmPvcVccCngToneDetectionB2A INTEGER, cirEmAtmPvcVccCodingTranslationB2A INTEGER, cirEmAtmPvcVccSarTypeB INTEGER, cirEmAtmPvcVccConnectionStatus INTEGER, cirEmAtmPvcVccDualHomed INTEGER, cirEmAtmPvcVccOamStatus INTEGER, cirEmAtmPvcVccViB INTEGER, cirEmAtmPvcVccCnfrmTypeB2A INTEGER, cirEmAtmPvcVccVUNIB INTEGER, cirEmAtmPvcVccAal2Cid INTEGER, cirEmAtmPvcVccOAMConnEndPtStatus INTEGER, cirEmAtmPvcVccOAMConnSegEndPtStatus INTEGER, cirEmAtmPvcVccConnFailureCauseA ConnFailureCause, cirEmAtmPvcVccConnFailureCauseB AtmConnFailureCause, cirEmAtmPvcVccDigitCollectTypeA2B INTEGER, cirEmAtmPvcVccDigitCollectTypeB2A INTEGER, cirEmAtmPvcVccEncodingStdA2B INTEGER, cirEmAtmPvcVccEncodingStdB2A INTEGER, cirEmAtmPvcVccEncodingProfileIdA2B INTEGER, cirEmAtmPvcVccEncodingProfileIdB2A INTEGER } cirEmAtmPvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the circuit emulation side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmPvcVccEntry 1 } cirEmAtmPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmPvcVccEntry 2 } cirEmAtmPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095." ::= { cirEmAtmPvcVccEntry 3 } cirEmAtmPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { cirEmAtmPvcVccEntry 4 } cirEmAtmPvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" ::= { cirEmAtmPvcVccEntry 5 } cirEmAtmPvcVccVoiceCompressionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 6 } cirEmAtmPvcVccSilenceDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirEmAtmPvcVccEntry 7 } cirEmAtmPvcVccEchoCancellationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 8 } cirEmAtmPvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type " DEFVAL { duplex } ::= { cirEmAtmPvcVccEntry 9 } cirEmAtmPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { cirEmAtmPvcVccEntry 10 } cirEmAtmPvcVccCngToneDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3), faxRelay(4), fxRlyMdmBypass(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode" DEFVAL { disabled } ::= { cirEmAtmPvcVccEntry 11 } cirEmAtmPvcVccCodingTranslationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmAtmPvcVccEntry 12 } cirEmAtmPvcVccVoiceCompressionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 13 } cirEmAtmPvcVccSilenceDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirEmAtmPvcVccEntry 14 } cirEmAtmPvcVccEchoCancellationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 15 } cirEmAtmPvcVccCngToneDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3), faxRelay(4), fxRlyMdmBypass(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM.Fax Relay is to allow detection of fax Calling Tones. In faxRelay Mode only Fax calling tone is detected . In fxRlyMdmBypass faxRelay is detected and Modem is done in bypass mode" DEFVAL { disabled } ::= { cirEmAtmPvcVccEntry 16 } cirEmAtmPvcVccCodingTranslationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmAtmPvcVccEntry 17 } cirEmAtmPvcVccSarTypeB OBJECT-TYPE SYNTAX INTEGER { aal2(3), aal1(4), aal2Std(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field will only be used when selecting voice compression, in other cases it will be set to aal1." DEFVAL { aal1 } ::= { cirEmAtmPvcVccEntry 18 } cirEmAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { cirEmAtmPvcVccEntry 19 } cirEmAtmPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { cirEmAtmPvcVccEntry 20 } cirEmAtmPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI." DEFVAL { unsupp } ::= { cirEmAtmPvcVccEntry 21 } cirEmAtmPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { cirEmAtmPvcVccEntry 22 } cirEmAtmPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { cirEmAtmPvcVccEntry 23 } cirEmAtmPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { cirEmAtmPvcVccEntry 24 } cirEmAtmPvcVccAal2Cid OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2." DEFVAL { 0 } ::= { cirEmAtmPvcVccEntry 25 } cirEmAtmPvcVccOAMConnEndPtStatus OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint status. Valid only at connection endpoint." ::= { cirEmAtmPvcVccEntry 26 } cirEmAtmPvcVccOAMConnSegEndPtStatus OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint status. Valid only at segment/connection endpoints." ::= { cirEmAtmPvcVccEntry 27 } cirEmAtmPvcVccConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { cirEmAtmPvcVccEntry 28 } cirEmAtmPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { cirEmAtmPvcVccEntry 29 } cirEmAtmPvcVccDigitCollectTypeA2B OBJECT-TYPE SYNTAX INTEGER { none(1), dtmf(2), mf(3), mf-r2-frwd(4), mf-r2-bkwd(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 30 } cirEmAtmPvcVccDigitCollectTypeB2A OBJECT-TYPE SYNTAX INTEGER { none(1), dtmf(2), mf(3), mf-r2-frwd(4), mf-r2-bkwd(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " Identify the digital tone setting. dtmf -- dual tone multifrequency dialed digits, mf -- multifrequency dialed digits, mf-r2-frwd -- R2 multifrequency forward dialed digits. mf-r2-bkwd-- R2 multifrequency backward dialed digits" DEFVAL { none } ::= { cirEmAtmPvcVccEntry 31 } cirEmAtmPvcVccEncodingStdA2B OBJECT-TYPE SYNTAX INTEGER { user(1), atmForum(2), itu-t(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. " DEFVAL { user } ::= { cirEmAtmPvcVccEntry 32 } cirEmAtmPvcVccEncodingStdB2A OBJECT-TYPE SYNTAX INTEGER { user(1), atmForum(2), itu-t(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. " DEFVAL { user } ::= { cirEmAtmPvcVccEntry 33 } cirEmAtmPvcVccEncodingProfileIdA2B OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. " DEFVAL { 1 } ::= { cirEmAtmPvcVccEntry 34 } cirEmAtmPvcVccEncodingProfileIdB2A OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " These are profiles defined according to standards User-Profile - No restrictions or checks, user freedom to choose any combination of Params. Atm Forum - These are profies defined by AF in document AF-VMOA-0145.000. In these cases the Identifiers are used and not the table numbers. Itu-t - These profiles are used from the I-366-2. " DEFVAL { 1 } ::= { cirEmAtmPvcVccEntry 35 } -- In ____________________________________ Out -- ______| SWITCH |__________ -- Out | | In -- |___________________________________| -- Frame Relay UNI A ATM UNI/NNI B -- -- The Frame Relay to ATM Inter-working PVC Table frAtmPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF FrAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of frame relay to ATM IWF connections" ::= { connectionConfig 7 } frAtmPvcVccEntry OBJECT-TYPE SYNTAX FrAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of frame relay to ATM IWF connections " INDEX { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } ::= { frAtmPvcVccTable 1 } FrAtmPvcVccEntry ::= SEQUENCE { frAtmPvcVccIfA IntfIndex, frAtmPvcVccDlciA Integer32, frAtmPvcVccIfB IntfIndex, frAtmPvcVccVpiB INTEGER, frAtmPvcVccVciB INTEGER, frAtmPvcVccMaxFrameSizeIn Integer32, frAtmPvcVccBcIn Integer32, frAtmPvcVccBeIn Integer32, frAtmPvcVccCirIn Integer32, frAtmPvcVccMaxFrameSizeOut Integer32, frAtmPvcVccBcOut Integer32, frAtmPvcVccBeOut Integer32, frAtmPvcVccCirOut Integer32, frAtmPvcVccServiceType INTEGER, frAtmPvcVccFlow INTEGER, frAtmPvcVccRowStatus RowStatus, frAtmPvcVccTimeLenIn INTEGER, frAtmPvcVccInterWorkingFuncIn INTEGER, frAtmPvcVccTimeLenOut INTEGER, frAtmPvcVccInterWorkingFuncOut INTEGER, frAtmPvcVccPeakCellRateA2B Integer32, frAtmPvcVccSusCellRateA2B Integer32, frAtmPvcVccMaxBurstSizeA2B Integer32, frAtmPvcVccPeakCellRateB2A Integer32, frAtmPvcVccSusCellRateB2A Integer32, frAtmPvcVccMaxBurstSizeB2A Integer32, frAtmPvcVccConnectionStatus INTEGER, frAtmPvcVccDualHomed INTEGER, frAtmPvcVccOamStatus INTEGER, frAtmPvcVccViB INTEGER, frAtmPvcVccCnfrmTypeB2A INTEGER, frAtmPvcVccVUNIB INTEGER, frAtmPvcVccOAMConnEndPtStatus INTEGER, frAtmPvcVccOAMSegEndPtStatus INTEGER, frAtmPvcVccMfsB2A INTEGER, frAtmPvcVccConnFailureCauseA FrConnFailureCause, frAtmPvcVccConnFailureCauseB AtmConnFailureCause, frAtmPvcVccTrafficShapingA2B INTEGER } frAtmPvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frAtmPvcVccEntry 1 } frAtmPvcVccDlciA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 1023." ::= { frAtmPvcVccEntry 2 } frAtmPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frAtmPvcVccEntry 3 } frAtmPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 4095." ::= { frAtmPvcVccEntry 4 } frAtmPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { frAtmPvcVccEntry 5 } frAtmPvcVccMaxFrameSizeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmPvcVccEntry 6 } frAtmPvcVccBcIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmPvcVccEntry 7 } frAtmPvcVccBeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 45000000 } ::= { frAtmPvcVccEntry 8 } frAtmPvcVccCirIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmPvcVccEntry 9 } frAtmPvcVccMaxFrameSizeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this PVC in the egress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmPvcVccEntry 10 } frAtmPvcVccBcOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmPvcVccEntry 11 } frAtmPvcVccBeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the egress direction (into the frame relay UNI)" DEFVAL { 45000000 } ::= { frAtmPvcVccEntry 12 } frAtmPvcVccCirOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the egress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmPvcVccEntry 13 } frAtmPvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type, Frame relay traffic is carried by VBR type of service only." DEFVAL { ubr } ::= { frAtmPvcVccEntry 14 } frAtmPvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type" DEFVAL { duplex } ::= { frAtmPvcVccEntry 15 } frAtmPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { frAtmPvcVccEntry 16 } frAtmPvcVccTimeLenIn OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmPvcVccEntry 17 } frAtmPvcVccInterWorkingFuncIn OBJECT-TYPE SYNTAX INTEGER { frf8-Transl(1), frf8-Pass(2), frf5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "InterWorking function." DEFVAL { frf8-Transl } ::= { frAtmPvcVccEntry 18 } frAtmPvcVccTimeLenOut OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmPvcVccEntry 19 } frAtmPvcVccInterWorkingFuncOut OBJECT-TYPE SYNTAX INTEGER { frf8-Transl(1), frf8-Pass(2), frf5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "InterWorking function." DEFVAL { frf8-Transl } ::= { frAtmPvcVccEntry 20 } frAtmPvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 21 } frAtmPvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 22 } frAtmPvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 23 } frAtmPvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 24 } frAtmPvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 25 } frAtmPvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmPvcVccEntry 26 } frAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { frAtmPvcVccEntry 27 } frAtmPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { frAtmPvcVccEntry 28 } frAtmPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI." DEFVAL { unsupp } ::= { frAtmPvcVccEntry 29 } frAtmPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { frAtmPvcVccEntry 30 } frAtmPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { frAtmPvcVccEntry 31 } frAtmPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { frAtmPvcVccEntry 32 } frAtmPvcVccOAMConnEndPtStatus OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint status. Valid only at connection endpoint." ::= { frAtmPvcVccEntry 33 } frAtmPvcVccOAMSegEndPtStatus OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint status. Valid only at segment/connection endpoint." ::= { frAtmPvcVccEntry 34 } frAtmPvcVccMfsB2A OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic" DEFVAL { 1 } ::= { frAtmPvcVccEntry 35 } frAtmPvcVccConnFailureCauseA OBJECT-TYPE SYNTAX FrConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { frAtmPvcVccEntry 36 } frAtmPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { frAtmPvcVccEntry 37 } frAtmPvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { frAtmPvcVccEntry 38 } -- In ____________________________________ Out -- ______| SWITCH |__________ -- Out | | In -- |___________________________________| -- Frame Relay UNI A Frame Relay UNI B -- -- The Frame Relay PVC Table frFrPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF FrFrPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of frame relay to frame relay connections" ::= { connectionConfig 8 } frFrPvcEntry OBJECT-TYPE SYNTAX FrFrPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of frame relay to frame relay PVC connections " INDEX { frFrPvcIfA, frFrPvcDlciA, frFrPvcIfB, frFrPvcDlciB } ::= { frFrPvcTable 1 } FrFrPvcEntry ::= SEQUENCE { frFrPvcIfA IntfIndex, frFrPvcDlciA Integer32, frFrPvcIfB IntfIndex, frFrPvcDlciB Integer32, frFrPvcMaxFrameSizeA2B Integer32, frFrPvcBcA2B Integer32, frFrPvcBeA2B Integer32, frFrPvcCirA2B Integer32, frFrPvcMaxFrameSizeB2A Integer32, frFrPvcBcB2A Integer32, frFrPvcBeB2A Integer32, frFrPvcCirB2A Integer32, frFrPvcServiceType INTEGER, frFrPvcFlow INTEGER, frFrPvcRowStatus RowStatus, frFrPvcTimeLenA2B INTEGER, frFrPvcInterWorkingFuncA2B INTEGER, frFrPvcTimeLenB2A INTEGER, frFrPvcInterWorkingFuncB2A INTEGER, frFrPvcPeakCellRateA2B Integer32, frFrPvcSusCellRateA2B Integer32, frFrPvcMaxBurstSizeA2B Integer32, frFrPvcPeakCellRateB2A Integer32, frFrPvcSusCellRateB2A Integer32, frFrPvcMaxBurstSizeB2A Integer32, frFrPvcConnectionStatus INTEGER, frFrPvcConnFailureCauseA FrConnFailureCause, frFrPvcConnFailureCauseB FrConnFailureCause } frFrPvcIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frFrPvcEntry 1 } frFrPvcDlciA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DLCI value for side A of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023." ::= { frFrPvcEntry 2 } frFrPvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of a frame relay-frame relay PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frFrPvcEntry 3 } frFrPvcDlciB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DLCI value for side B of a frame relay-frame relay PVC connection. Valid range is a number between 0 and 1023." ::= { frFrPvcEntry 4 } frFrPvcMaxFrameSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this PVC in the A to B direction." DEFVAL { 4096 } ::= { frFrPvcEntry 5 } frFrPvcBcA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the A to B direction." DEFVAL { 0 } ::= { frFrPvcEntry 6 } frFrPvcBeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the A to B direction." DEFVAL { 45000000 } ::= { frFrPvcEntry 7 } frFrPvcCirA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the A to B direction." DEFVAL { 0 } ::= { frFrPvcEntry 8 } frFrPvcMaxFrameSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this PVC in the B to A direction." DEFVAL { 4096 } ::= { frFrPvcEntry 9 } frFrPvcBcB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the B to A direction." DEFVAL { 0 } ::= { frFrPvcEntry 10 } frFrPvcBeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the B to A direction." DEFVAL { 45000000 } ::= { frFrPvcEntry 11 } frFrPvcCirB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the B to A direction." DEFVAL { 0 } ::= { frFrPvcEntry 12 } frFrPvcServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type, Frame relay traffic is carried by VBR type of service only." DEFVAL { ubr } ::= { frFrPvcEntry 13 } frFrPvcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Flow Type" DEFVAL { duplex } ::= { frFrPvcEntry 14 } frFrPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { frFrPvcEntry 15 } frFrPvcTimeLenA2B OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frFrPvcEntry 16 } frFrPvcInterWorkingFuncA2B OBJECT-TYPE SYNTAX INTEGER { frf8-Transl(1), frf8-Pass(2), frf5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "InterWorking function." DEFVAL { frf8-Transl } ::= { frFrPvcEntry 17 } frFrPvcTimeLenB2A OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frFrPvcEntry 18 } frFrPvcInterWorkingFuncB2A OBJECT-TYPE SYNTAX INTEGER { frf8-Transl(1), frf8-Pass(2), frf5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "InterWorking function." DEFVAL { frf8-Transl } ::= { frFrPvcEntry 19 } frFrPvcPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 20 } frFrPvcSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 21 } frFrPvcMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 22 } frFrPvcPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 23 } frFrPvcSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 24 } frFrPvcMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frFrPvcEntry 25 } frFrPvcConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { frFrPvcEntry 26 } frFrPvcConnFailureCauseA OBJECT-TYPE SYNTAX FrConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { frFrPvcEntry 27 } frFrPvcConnFailureCauseB OBJECT-TYPE SYNTAX FrConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { frFrPvcEntry 28 } vbrAtmPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of terminal emulation to ATM network IWF connections " ::= { connectionConfig 9 } vbrAtmPvcVccEntry OBJECT-TYPE SYNTAX VbrAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of terminal emulation to ATM network IWF connections" INDEX { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } ::= { vbrAtmPvcVccTable 1 } VbrAtmPvcVccEntry ::= SEQUENCE { vbrAtmPvcVccIfA IntfIndex, vbrAtmPvcVccIfB IntfIndex, vbrAtmPvcVccVpiB INTEGER, vbrAtmPvcVccVciB INTEGER, vbrAtmPvcVccServiceType INTEGER, vbrAtmPvcVccPeakCellRateA2B Integer32, vbrAtmPvcVccSusCellRateA2B Integer32, vbrAtmPvcVccMaxBurstSizeA2B Integer32, vbrAtmPvcVccPeakCellRateB2A Integer32, vbrAtmPvcVccSusCellRateB2A Integer32, vbrAtmPvcVccMaxBurstSizeB2A Integer32, vbrAtmPvcVccFlow INTEGER, vbrAtmPvcVccRowStatus RowStatus, vbrAtmPvcVccConnectionStatus INTEGER, vbrAtmPvcVccDualHomed INTEGER, vbrAtmPvcVccOamStatus INTEGER, vbrAtmPvcVccViB INTEGER, vbrAtmPvcVccCnfrmTypeB2A INTEGER, vbrAtmPvcVccVUNIB INTEGER, vbrAtmPvcVccOAMConnEndPtStatus INTEGER, vbrAtmPvcVccOAMSegEndPtStatus INTEGER, vbrAtmPvcVccMfsB2A INTEGER, vbrAtmPvcVccConnFailureCauseA ConnFailureCause, vbrAtmPvcVccConnFailureCauseB AtmConnFailureCause, vbrAtmPvcVccSarTypeB INTEGER, vbrAtmPvcVccAal2Cid INTEGER, vbrAtmPvcVccTrafficShapingA2B INTEGER } vbrAtmPvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the variable bit rate side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmPvcVccEntry 1 } vbrAtmPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmPvcVccEntry 2 } vbrAtmPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 4095." ::= { vbrAtmPvcVccEntry 3 } vbrAtmPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { vbrAtmPvcVccEntry 4 } vbrAtmPvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { vbrAtmPvcVccEntry 5 } vbrAtmPvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 6 } vbrAtmPvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 7 } vbrAtmPvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cells" DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 8 } vbrAtmPvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, in cell per second." DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 9 } vbrAtmPvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, in cell per second." DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 10 } vbrAtmPvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, in cells." DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 11 } vbrAtmPvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow type" DEFVAL { duplex } ::= { vbrAtmPvcVccEntry 12 } vbrAtmPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { vbrAtmPvcVccEntry 13 } vbrAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { vbrAtmPvcVccEntry 14 } vbrAtmPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { vbrAtmPvcVccEntry 15 } vbrAtmPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint." DEFVAL { unsupp } ::= { vbrAtmPvcVccEntry 16 } vbrAtmPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { vbrAtmPvcVccEntry 17 } vbrAtmPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { vbrAtmPvcVccEntry 18 } vbrAtmPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { vbrAtmPvcVccEntry 19 } vbrAtmPvcVccOAMConnEndPtStatus OBJECT-TYPE SYNTAX INTEGER { ete-active(1), ete-ais-state(2), ete-rdi-state(3), ete-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection endpoint status. Valid only at connection endpoint." ::= { vbrAtmPvcVccEntry 20 } vbrAtmPvcVccOAMSegEndPtStatus OBJECT-TYPE SYNTAX INTEGER { seg-active(1), seg-ais-state(2), seg-rdi-state(3), seg-ais-rdi-state(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Segment endpoint status. Valid only at segment/connection endpoint." ::= { vbrAtmPvcVccEntry 21 } vbrAtmPvcVccMfsB2A OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic" DEFVAL { 1 } ::= { vbrAtmPvcVccEntry 22 } vbrAtmPvcVccConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { vbrAtmPvcVccEntry 23 } vbrAtmPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { vbrAtmPvcVccEntry 24 } vbrAtmPvcVccSarTypeB OBJECT-TYPE SYNTAX INTEGER { none(1), aal5(2), aal2Std(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field will be used to connect hdlc to atm directly when sar type is none or aal5 or go through dsp2 first when sar type is aal2Std." DEFVAL { aal5 } ::= { vbrAtmPvcVccEntry 25 } vbrAtmPvcVccAal2Cid OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Aal2 Cid Used to pack hdlc chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2." DEFVAL { 0 } ::= { vbrAtmPvcVccEntry 26 } vbrAtmPvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { vbrAtmPvcVccEntry 27 } cirEmCirEmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmCirEmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Circuit Emulation to Circuit Emulation" ::= { connectionConfig 10 } cirEmCirEmPvcEntry OBJECT-TYPE SYNTAX CirEmCirEmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of circuit emulation to circuit emulation connections." INDEX { cirEmCirEmPvcIfA, cirEmCirEmPvcIfB } ::= { cirEmCirEmPvcTable 1 } CirEmCirEmPvcEntry ::= SEQUENCE { cirEmCirEmPvcIfA IntfIndex, cirEmCirEmPvcIfB IntfIndex, cirEmCirEmPvcEchoCancellationA2B INTEGER, cirEmCirEmPvcFlow INTEGER, cirEmCirEmPvcRowStatus RowStatus, cirEmCirEmPvcCodingTranslationA2B INTEGER, cirEmCirEmPvcEchoCancellationB2A INTEGER, cirEmCirEmPvcCodingTranslationB2A INTEGER, cirEmCirEmPvcConnectionStatus INTEGER, cirEmCirEmPvcInterworking INTEGER, cirEmCirEmPvcServiceType INTEGER, cirEmCirEmPvcConnFailureCauseA ConnFailureCause, cirEmCirEmPvcConnFailureCauseB ConnFailureCause } cirEmCirEmPvcIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmCirEmPvcEntry 1 } cirEmCirEmPvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of a circuit emulation-circuit emulation PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmCirEmPvcEntry 2 } cirEmCirEmPvcEchoCancellationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo cancellation off/on" DEFVAL { none } ::= { cirEmCirEmPvcEntry 5 } cirEmCirEmPvcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type " DEFVAL { duplex } ::= { cirEmCirEmPvcEntry 6 } cirEmCirEmPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { cirEmCirEmPvcEntry 7 } cirEmCirEmPvcCodingTranslationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmCirEmPvcEntry 8 } cirEmCirEmPvcEchoCancellationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo cancellation off/on" DEFVAL { none } ::= { cirEmCirEmPvcEntry 9 } cirEmCirEmPvcCodingTranslationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmCirEmPvcEntry 10 } cirEmCirEmPvcConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { cirEmCirEmPvcEntry 11 } cirEmCirEmPvcInterworking OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "CE - CE interworking enable/disabled " DEFVAL { enabled } ::= { cirEmCirEmPvcEntry 12 } cirEmCirEmPvcServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { cbr-1 } ::= { cirEmCirEmPvcEntry 13 } cirEmCirEmPvcConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { cirEmCirEmPvcEntry 14 } cirEmCirEmPvcConnFailureCauseB OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { cirEmCirEmPvcEntry 15 } vbrVbrPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrVbrPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of terminal emulation to ATM network IWF connections " ::= { connectionConfig 11 } vbrVbrPvcEntry OBJECT-TYPE SYNTAX VbrVbrPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of terminal emulation to ATM network IWF connections" INDEX { vbrVbrPvcIfA, vbrVbrPvcIfB } ::= { vbrVbrPvcTable 1 } VbrVbrPvcEntry ::= SEQUENCE { vbrVbrPvcIfA IntfIndex, vbrVbrPvcIfB IntfIndex, vbrVbrPvcPeakCellRateA2B Integer32, vbrVbrPvcSusCellRateA2B Integer32, vbrVbrPvcMaxBurstSizeA2B Integer32, vbrVbrPvcPeakCellRateB2A Integer32, vbrVbrPvcSusCellRateB2A Integer32, vbrVbrPvcMaxBurstSizeB2A Integer32, vbrVbrPvcFlow INTEGER, vbrVbrPvcRowStatus RowStatus, vbrVbrPvcConnectionStatus INTEGER, vbrVbrPvcServiceType INTEGER, vbrVbrPvcConnFailureCauseA ConnFailureCause, vbrVbrPvcConnFailureCauseB ConnFailureCause } vbrVbrPvcIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrVbrPvcEntry 1 } vbrVbrPvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of a variable bit rate-variable bit rate PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrVbrPvcEntry 2 } vbrVbrPvcPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrVbrPvcEntry 3 } vbrVbrPvcSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrVbrPvcEntry 4 } vbrVbrPvcMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cells" DEFVAL { 1 } ::= { vbrVbrPvcEntry 5 } vbrVbrPvcPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, in cell per second." DEFVAL { 1 } ::= { vbrVbrPvcEntry 6 } vbrVbrPvcSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, in cell per second." DEFVAL { 1 } ::= { vbrVbrPvcEntry 7 } vbrVbrPvcMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, in cells." DEFVAL { 1 } ::= { vbrVbrPvcEntry 8 } vbrVbrPvcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type" DEFVAL { duplex } ::= { vbrVbrPvcEntry 9 } vbrVbrPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { vbrVbrPvcEntry 10 } vbrVbrPvcConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { vbrVbrPvcEntry 11 } vbrVbrPvcServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { vbrVbrPvcEntry 12 } vbrVbrPvcConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { vbrVbrPvcEntry 13 } vbrVbrPvcConnFailureCauseB OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { vbrVbrPvcEntry 14 } bridgeBridgePvcTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeBridgePvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table of bridge-bridge PVC connection" ::= { connectionConfig 12 } bridgeBridgePvcEntry OBJECT-TYPE SYNTAX BridgeBridgePvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definitions of bridge-bridge PVC connection attributes" INDEX { bridgeBridgePvcIfA, bridgeBridgePvcIfB} ::= { bridgeBridgePvcTable 1 } BridgeBridgePvcEntry ::= SEQUENCE { bridgeBridgePvcIfA Integer32, bridgeBridgePvcIfB Integer32, bridgeBridgePvcRowStatus RowStatus, bridgeBridgePvcConnectionStatus INTEGER, bridgeBridgePvcConnFailureCauseA ConnFailureCause, bridgeBridgePvcConnFailureCauseB ConnFailureCause } bridgeBridgePvcIfA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { bridgeBridgePvcEntry 1 } bridgeBridgePvcIfB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of a bridge-bridge PVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { bridgeBridgePvcEntry 2 } bridgeBridgePvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { bridgeBridgePvcEntry 3 } bridgeBridgePvcConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { bridgeBridgePvcEntry 4 } bridgeBridgePvcConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { bridgeBridgePvcEntry 5 } bridgeBridgePvcConnFailureCauseB OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { bridgeBridgePvcEntry 6 } bridgeAtmPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of bridge Atm PVC VCC connection entries" ::= { connectionConfig 13 } bridgeAtmPvcVccEntry OBJECT-TYPE SYNTAX BridgeAtmPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of bridge atm PVC VCC connection attribution." INDEX { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } ::= { bridgeAtmPvcVccTable 1 } BridgeAtmPvcVccEntry ::= SEQUENCE { bridgeAtmPvcVccIfA Integer32, bridgeAtmPvcVccIfB Integer32, bridgeAtmPvcVccVpiB INTEGER, bridgeAtmPvcVccVciB INTEGER, bridgeAtmPvcVccServiceType INTEGER, bridgeAtmPvcVccPeakCellRateB2A Integer32, bridgeAtmPvcVccSusCellRateB2A Integer32, bridgeAtmPvcVccMaxBurstSizeB2A Integer32, bridgeAtmPvcVccRowStatus RowStatus, bridgeAtmPvcVccConnectionStatus INTEGER, bridgeAtmPvcVccDualHomed INTEGER, bridgeAtmPvcVccViB INTEGER, bridgeAtmPvcVccCnfrmTypeB2A INTEGER, bridgeAtmPvcVccVUNIB INTEGER, bridgeAtmPvcVccMfsB2A INTEGER, bridgeAtmPvcVccConnFailureCauseA ConnFailureCause, bridgeAtmPvcVccConnFailureCauseB AtmConnFailureCause, bridgeAtmPvcVccOamStatus INTEGER, bridgeAtmPvcVccTrafficShapingA2B INTEGER } bridgeAtmPvcVccIfA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the bridge side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { bridgeAtmPvcVccEntry 1 } bridgeAtmPvcVccIfB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a bridge-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { bridgeAtmPvcVccEntry 2 } bridgeAtmPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 4095." ::= { bridgeAtmPvcVccEntry 3 } bridgeAtmPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a bridge-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { bridgeAtmPvcVccEntry 4 } bridgeAtmPvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), gfr2(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { bridgeAtmPvcVccEntry 5 } bridgeAtmPvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, in cell per second." DEFVAL { 1 } ::= { bridgeAtmPvcVccEntry 6 } bridgeAtmPvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, in cell per second." DEFVAL { 1 } ::= { bridgeAtmPvcVccEntry 7 } bridgeAtmPvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, in cells." DEFVAL { 1 } ::= { bridgeAtmPvcVccEntry 8 } bridgeAtmPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { bridgeAtmPvcVccEntry 9 } bridgeAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { bridgeAtmPvcVccEntry 10 } bridgeAtmPvcVccDualHomed OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Does this PVC need a backup Dual homing PVC." DEFVAL { no } ::= { bridgeAtmPvcVccEntry 11 } bridgeAtmPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { bridgeAtmPvcVccEntry 12 } bridgeAtmPvcVccCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { bridgeAtmPvcVccEntry 14 } bridgeAtmPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { bridgeAtmPvcVccEntry 15 } bridgeAtmPvcVccMfsB2A OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Frame Size for GFR traffic" DEFVAL { 1 } ::= { bridgeAtmPvcVccEntry 16 } bridgeAtmPvcVccConnFailureCauseA OBJECT-TYPE SYNTAX ConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION " connestion status reason code" ::= { bridgeAtmPvcVccEntry 17 } bridgeAtmPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { bridgeAtmPvcVccEntry 18 } bridgeAtmPvcVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore End-Seg-Pt: A side is both an end point and a segment point." DEFVAL { unsupp } ::= { bridgeAtmPvcVccEntry 19 } bridgeAtmPvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { bridgeAtmPvcVccEntry 20 } cirEmAtmBkPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage CES DHPVC backup pvc." ::= { connectionConfig 14 } cirEmAtmBkPvcVccEntry OBJECT-TYPE SYNTAX CirEmAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the CES DHPVC table. There is one entry in the table corresponding to each active row in the cirEmAtmPvcVccTable for which the cirEmAtmPvcVccDualHomed object takes the value 'yes.'" INDEX { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } ::= { cirEmAtmBkPvcVccTable 1 } CirEmAtmBkPvcVccEntry ::= SEQUENCE { cirEmAtmBkPvcVccIfB IntfIndex, cirEmAtmBkPvcVccVpiB INTEGER, cirEmAtmBkPvcVccVciB INTEGER, cirEmAtmBkPvcVccActivePvc INTEGER, cirEmAtmBkPvcVccAutoSwitch INTEGER, cirEmAtmBkPvcVccRowStatus RowStatus, cirEmAtmBkPvcVccViB INTEGER, cirEmAtmBkPvcVccVUNIB INTEGER, cirEmAtmBkPvcVccConnFailureCauseB AtmConnFailureCause } cirEmAtmBkPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmBkPvcVccEntry 1 } cirEmAtmBkPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { cirEmAtmBkPvcVccEntry 2 } cirEmAtmBkPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup circuit emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { cirEmAtmBkPvcVccEntry 3 } cirEmAtmBkPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { cirEmAtmBkPvcVccEntry 4 } cirEmAtmBkPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { cirEmAtmBkPvcVccEntry 5 } cirEmAtmBkPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { cirEmAtmBkPvcVccEntry 6 } cirEmAtmBkPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { cirEmAtmBkPvcVccEntry 7 } cirEmAtmBkPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { cirEmAtmBkPvcVccEntry 8 } cirEmAtmBkPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { cirEmAtmBkPvcVccEntry 9 } vbrAtmBkPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage terminal emulation DHPVC backup pvc." ::= { connectionConfig 15 } vbrAtmBkPvcVccEntry OBJECT-TYPE SYNTAX VbrAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the terminal emulation DHPVC table. There is one entry in the table corresponding to each active row in the vbrAtmPvcVccTable for which the vbrAtmPvcVccDualHomed object takes the value 'yes'." INDEX { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } ::= { vbrAtmBkPvcVccTable 1 } VbrAtmBkPvcVccEntry ::= SEQUENCE { vbrAtmBkPvcVccIfB IntfIndex, vbrAtmBkPvcVccVpiB INTEGER, vbrAtmBkPvcVccVciB INTEGER, vbrAtmBkPvcVccActivePvc INTEGER, vbrAtmBkPvcVccAutoSwitch INTEGER, vbrAtmBkPvcVccRowStatus RowStatus, vbrAtmBkPvcVccViB INTEGER, vbrAtmBkPvcVccVUNIB INTEGER, vbrAtmBkPvcVccConnFailureCauseB AtmConnFailureCause } vbrAtmBkPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmBkPvcVccEntry 1 } vbrAtmBkPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { vbrAtmBkPvcVccEntry 2 } vbrAtmBkPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup terminal emulation-atm DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { vbrAtmBkPvcVccEntry 3 } vbrAtmBkPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { vbrAtmBkPvcVccEntry 4 } vbrAtmBkPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { vbrAtmBkPvcVccEntry 5 } vbrAtmBkPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { vbrAtmBkPvcVccEntry 6 } vbrAtmBkPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { vbrAtmBkPvcVccEntry 7 } vbrAtmBkPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { vbrAtmBkPvcVccEntry 8 } vbrAtmBkPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { vbrAtmBkPvcVccEntry 9 } atmSpvcVccAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSpvcVccAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC ATM network interface addresses." ::= { connectionConfig 16 } atmSpvcVccAddrEntry OBJECT-TYPE SYNTAX AtmSpvcVccAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of ATM SPVC address table." INDEX { atmSpvcVccIfA } ::= { atmSpvcVccAddrTable 1 } AtmSpvcVccAddrEntry ::= SEQUENCE { atmSpvcVccIfA IntfIndex, atmSpvcVccAtmPortAddr OCTET STRING, atmSpvcVccAddrRowStatus RowStatus } atmSpvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmSpvcVccAddrEntry 1 } atmSpvcVccAtmPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Local ATM port NSAP address." ::= { atmSpvcVccAddrEntry 2 } atmSpvcVccAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established." ::= { atmSpvcVccAddrEntry 3 } atmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC ATM virtual channel connections." ::= { connectionConfig 17 } atmSpvcVccEntry OBJECT-TYPE SYNTAX AtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of ATM SPVC VCC connections." INDEX { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } ::= { atmSpvcVccTable 1 } AtmSpvcVccEntry ::= SEQUENCE { atmSpvcVccVpiA INTEGER, atmSpvcVccVciA INTEGER, atmSpvcVccIfB IntfIndex, atmSpvcVccVpiB INTEGER, atmSpvcVccVciB INTEGER, atmSpvcVccServiceTypeA2B INTEGER, atmSpvcVccSarTypeA2B INTEGER, atmSpvcVccPeakCellRateA2B Integer32, atmSpvcVccSusCellRateA2B Integer32, atmSpvcVccMaxBurstSizeA2B Integer32, atmSpvcVccFrwdErrCorrectionA2B INTEGER, atmSpvcVccServiceTypeB2A INTEGER, atmSpvcVccSarTypeB2A INTEGER, atmSpvcVccPeakCellRateB2A Integer32, atmSpvcVccSusCellRateB2A Integer32, atmSpvcVccMaxBurstSizeB2A Integer32, atmSpvcVccFrwdErrCorrectionB2A INTEGER, atmSpvcVccFlow INTEGER, atmSpvcVccType INTEGER, atmSpvcVccConnType INTEGER, atmSpvcVccLeafReference INTEGER, atmSpvcVccOperStatus INTEGER, atmSpvcVccRowStatus RowStatus, atmSpvcVccViA INTEGER, atmSpvcVccViB INTEGER, atmSpvcVccTrafficShapingA2B INTEGER, atmSpvcVccTrafficShapingB2A INTEGER } atmSpvcVccVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmSpvcVccEntry 1 } atmSpvcVccVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmSpvcVccEntry 2 } atmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmSpvcVccEntry 3 } atmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmSpvcVccEntry 4 } atmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmSpvcVccEntry 5 } atmSpvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM port." DEFVAL { ubr } ::= { atmSpvcVccEntry 6 } atmSpvcVccSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM port." DEFVAL { null } ::= { atmSpvcVccEntry 7 } atmSpvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 8 } atmSpvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 9 } atmSpvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 10 } atmSpvcVccFrwdErrCorrectionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM port side." DEFVAL { none } ::= { atmSpvcVccEntry 11 } atmSpvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM trunk side." DEFVAL { ubr } ::= { atmSpvcVccEntry 12 } atmSpvcVccSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM trunk side." DEFVAL { null } ::= { atmSpvcVccEntry 13 } atmSpvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 14 } atmSpvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 15 } atmSpvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmSpvcVccEntry 16 } atmSpvcVccFrwdErrCorrectionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM trunk side." DEFVAL { none } ::= { atmSpvcVccEntry 17 } atmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of flow, pointToMultipointA2B is for future support." DEFVAL { duplex } ::= { atmSpvcVccEntry 18 } atmSpvcVccType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of connection." DEFVAL { nonsecured } ::= { atmSpvcVccEntry 19 } atmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER { activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls." ::= { atmSpvcVccEntry 20 } atmSpvcVccLeafReference OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1." ::= { atmSpvcVccEntry 21 } atmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational." ::= { atmSpvcVccEntry 22 } atmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released." ::= { atmSpvcVccEntry 23 } atmSpvcVccViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmSpvcVccEntry 24 } atmSpvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmSpvcVccEntry 25 } atmSpvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmSpvcVccEntry 26 } atmSpvcVccTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmSpvcVccEntry 27 } atmSpvcVccActiveSvcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to manage active SVCs established across ATM networks between ATM entities." ::= { connectionConfig 18 } atmSpvcVccActiveSvcEntry OBJECT-TYPE SYNTAX AtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ATM active SVC table. There is one entry in the table corresponding to each active row in the atm SPVC VCC Table for which the atmSpvcVccConnType takes the value 'activeSvc'." INDEX { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } ::= { atmSpvcVccActiveSvcTable 1 } AtmSpvcVccActiveSvcEntry ::= SEQUENCE { atmSpvcVccRemoteAtmPortAddr OCTET STRING, atmSpvcVccRemoteSelectType INTEGER, atmSpvcVccRemoteVpi INTEGER, atmSpvcVccRemoteVci INTEGER, atmSpvcVccRetryInterval INTEGER, atmSpvcVccRetryLimit INTEGER, atmSpvcVccRestart INTEGER, atmSpvcVccRetryFailure Integer32, atmSpvcVccReleaseCause INTEGER, atmSpvcVccReleaseDiag OCTET STRING } atmSpvcVccRemoteAtmPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote ATM port NSAP address, not meaningful if passive type of connection." ::= { atmSpvcVccActiveSvcEntry 1 } atmSpvcVccRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmSpvcVccRemoteVpi and atmSpvcVccRemoteVci, must be supplied and are used at the destination." ::= { atmSpvcVccActiveSvcEntry 2 } atmSpvcVccRemoteVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { atmSpvcVccActiveSvcEntry 3 } atmSpvcVccRemoteVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { atmSpvcVccActiveSvcEntry 4 } atmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retry will be attempted immediately." ::= { atmSpvcVccActiveSvcEntry 5 } atmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries should be attempted. A value of 0 indicates no limit." ::= { atmSpvcVccActiveSvcEntry 6 } atmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmSpvcVccActiveSvcEntry 7 } atmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted." ::= { atmSpvcVccActiveSvcEntry 8 } atmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { atmSpvcVccActiveSvcEntry 9 } atmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { atmSpvcVccActiveSvcEntry 10 } cirEmAtmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Circuit Emulation to ATM Soft PVCs." ::= { connectionConfig 19 } cirEmAtmSpvcVccEntry OBJECT-TYPE SYNTAX CirEmAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of circuit emulation to ATM SPVC connections." INDEX { cirEmAtmSpvcVccIfA } ::= { cirEmAtmSpvcVccTable 1 } CirEmAtmSpvcVccEntry ::= SEQUENCE { cirEmAtmSpvcVccIfA IntfIndex, cirEmAtmSpvcVccIfB IntfIndex, cirEmAtmSpvcVccVpiB INTEGER, cirEmAtmSpvcVccVciB INTEGER, cirEmAtmSpvcVccVoiceCompressionA2B INTEGER, cirEmAtmSpvcVccSilenceDetectionA2B INTEGER, cirEmAtmSpvcVccEchoCancellationA2B INTEGER, cirEmAtmSpvcVccCngToneDetectionA2B INTEGER, cirEmAtmSpvcVccCodingTranslationA2B INTEGER, cirEmAtmSpvcVccVoiceCompressionB2A INTEGER, cirEmAtmSpvcVccSilenceDetectionB2A INTEGER, cirEmAtmSpvcVccEchoCancellationB2A INTEGER, cirEmAtmSpvcVccCngToneDetectionB2A INTEGER, cirEmAtmSpvcVccCodingTranslationB2A INTEGER, cirEmAtmSpvcVccFlow INTEGER, cirEmAtmSpvcVccServiceType INTEGER, cirEmAtmSpvcVccConnType INTEGER, cirEmAtmSpvcVccCePortAddr OCTET STRING, cirEmAtmSpvcVccOperStatus INTEGER, cirEmAtmSpvcVccRowStatus RowStatus, cirEmAtmSpvcVccViB INTEGER } cirEmAtmSpvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmSpvcVccEntry 1 } cirEmAtmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmSpvcVccEntry 2 } cirEmAtmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { cirEmAtmSpvcVccEntry 3 } cirEmAtmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { cirEmAtmSpvcVccEntry 4 } cirEmAtmSpvcVccVoiceCompressionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 5 } cirEmAtmSpvcVccSilenceDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirEmAtmSpvcVccEntry 6 } cirEmAtmSpvcVccEchoCancellationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 7 } cirEmAtmSpvcVccCngToneDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM" DEFVAL { disabled } ::= { cirEmAtmSpvcVccEntry 8 } cirEmAtmSpvcVccCodingTranslationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 9 } cirEmAtmSpvcVccVoiceCompressionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 10 } cirEmAtmSpvcVccSilenceDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirEmAtmSpvcVccEntry 11 } cirEmAtmSpvcVccEchoCancellationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 12 } cirEmAtmSpvcVccCngToneDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM" DEFVAL { disabled } ::= { cirEmAtmSpvcVccEntry 13 } cirEmAtmSpvcVccCodingTranslationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirEmAtmSpvcVccEntry 14 } cirEmAtmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support." DEFVAL { duplex } ::= { cirEmAtmSpvcVccEntry 15 } cirEmAtmSpvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" ::= { cirEmAtmSpvcVccEntry 16 } cirEmAtmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER{ activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls" ::= { cirEmAtmSpvcVccEntry 17 } cirEmAtmSpvcVccCePortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "local CES port nsap address" ::= { cirEmAtmSpvcVccEntry 18 } cirEmAtmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational." ::= { cirEmAtmSpvcVccEntry 19 } cirEmAtmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released." ::= { cirEmAtmSpvcVccEntry 20 } cirEmAtmSpvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { cirEmAtmSpvcVccEntry 21 } cirEmAtmSpvcVccActiveSvcTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to manage active SVCs established across ATM networks between CES entities." ::= { connectionConfig 20 } cirEmAtmSpvcVccActiveSvcEntry OBJECT-TYPE SYNTAX CirEmAtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the CES active SVC table. There is one entry in the table corresponding to each active row in the cirEmAtmSpvcVccRowStatus for which the cirEmAtmSpvcVccConnType takes the value 'activeSvc'." INDEX { cirEmAtmSpvcVccIfA } ::= { cirEmAtmSpvcVccActiveSvcTable 1 } CirEmAtmSpvcVccActiveSvcEntry ::= SEQUENCE { cirEmAtmSpvcVccRemoteCePortAddr OCTET STRING, cirEmAtmSpvcVccRetryInterval INTEGER, cirEmAtmSpvcVccRetryLimit INTEGER, cirEmAtmSpvcVccRestart INTEGER, cirEmAtmSpvcVccRetryFailure Integer32, cirEmAtmSpvcVccReleaseCause INTEGER, cirEmAtmSpvcVccReleaseDiag OCTET STRING } cirEmAtmSpvcVccRemoteCePortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated." ::= { cirEmAtmSpvcVccActiveSvcEntry 1 } cirEmAtmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately." DEFVAL { 10 } ::= { cirEmAtmSpvcVccActiveSvcEntry 2 } cirEmAtmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries. 0 indicates no limit." DEFVAL { 0 } ::= { cirEmAtmSpvcVccActiveSvcEntry 3 } cirEmAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "restart, the active SVC is released if necessary and a new setup procedure is begun; or noop" ::= { cirEmAtmSpvcVccActiveSvcEntry 4 } cirEmAtmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted." ::= { cirEmAtmSpvcVccActiveSvcEntry 5 } cirEmAtmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { cirEmAtmSpvcVccActiveSvcEntry 6 } cirEmAtmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { cirEmAtmSpvcVccActiveSvcEntry 7 } vbrAtmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC atm virtual channel connections" ::= { connectionConfig 21 } vbrAtmSpvcVccEntry OBJECT-TYPE SYNTAX VbrAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm SPVC VCC connections" INDEX { vbrAtmSpvcVccIfA } ::= { vbrAtmSpvcVccTable 1 } VbrAtmSpvcVccEntry ::= SEQUENCE { vbrAtmSpvcVccIfA IntfIndex, vbrAtmSpvcVccIfB IntfIndex, vbrAtmSpvcVccVpiB INTEGER, vbrAtmSpvcVccVciB INTEGER, vbrAtmSpvcVccServiceType INTEGER, vbrAtmSpvcVccPeakCellRateA2B Integer32, vbrAtmSpvcVccSusCellRateA2B Integer32, vbrAtmSpvcVccMaxBurstSizeA2B Integer32, vbrAtmSpvcVccPeakCellRateB2A Integer32, vbrAtmSpvcVccSusCellRateB2A Integer32, vbrAtmSpvcVccMaxBurstSizeB2A Integer32, vbrAtmSpvcVccFlow INTEGER, vbrAtmSpvcVccConnType INTEGER, vbrAtmSpvcVccVbrPortAddr OCTET STRING, vbrAtmSpvcVccOperStatus INTEGER, vbrAtmSpvcVccRowStatus RowStatus, vbrAtmSpvcVccViB INTEGER, vbrAtmSpvcVccTrafficShapingA2B INTEGER } vbrAtmSpvcVccIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcVccEntry 1 } vbrAtmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcVccEntry 2 } vbrAtmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { vbrAtmSpvcVccEntry 3 } vbrAtmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { vbrAtmSpvcVccEntry 4 } vbrAtmSpvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt1(2), vbr-nrt2(3), vbr-rt1(4), vbr-rt2(5), vbr-express(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { vbrAtmSpvcVccEntry 5 } vbrAtmSpvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 6 } vbrAtmSpvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 7 } vbrAtmSpvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cells" DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 8 } vbrAtmSpvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, ATM trunk, in cell per second." DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 9 } vbrAtmSpvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, ATM trunk, in cell per second." DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 10 } vbrAtmSpvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, ATM trunk, in cells." DEFVAL { 1 } ::= { vbrAtmSpvcVccEntry 11 } vbrAtmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of flow" DEFVAL { duplex } ::= { vbrAtmSpvcVccEntry 12 } vbrAtmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER{ activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls" ::= { vbrAtmSpvcVccEntry 13 } vbrAtmSpvcVccVbrPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "local Vbr port nsap address" ::= { vbrAtmSpvcVccEntry 14 } vbrAtmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational." ::= { vbrAtmSpvcVccEntry 15 } vbrAtmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released." ::= { vbrAtmSpvcVccEntry 16 } vbrAtmSpvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { vbrAtmSpvcVccEntry 17 } vbrAtmSpvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { vbrAtmSpvcVccEntry 18 } vbrAtmSpvcVccActiveSvcTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to manage active SVCs established across ATM networks between ATM entities." ::= { connectionConfig 22 } vbrAtmSpvcVccActiveSvcEntry OBJECT-TYPE SYNTAX VbrAtmSpvcVccActiveSvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Terminal Emulation ATM active SVC table. There is one entry in the table corresponding to each active row in the vbrAtmSpvcVccTable for which the vbrAtmSpvcVccConnType takes the value 'activeSvc'." INDEX { vbrAtmSpvcVccIfA } ::= { vbrAtmSpvcVccActiveSvcTable 1 } VbrAtmSpvcVccActiveSvcEntry ::= SEQUENCE { vbrAtmSpvcVccRemoteVbrPortAddr OCTET STRING, vbrAtmSpvcVccRetryInterval INTEGER, vbrAtmSpvcVccRetryLimit INTEGER, vbrAtmSpvcVccRestart INTEGER, vbrAtmSpvcVccRetryFailure Integer32, vbrAtmSpvcVccReleaseCause INTEGER, vbrAtmSpvcVccReleaseDiag OCTET STRING } vbrAtmSpvcVccRemoteVbrPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "remote VBR port nsap address implemening IWF, not meaningful if passive type of connection" ::= { vbrAtmSpvcVccActiveSvcEntry 1 } vbrAtmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately." DEFVAL { 10 } ::= { vbrAtmSpvcVccActiveSvcEntry 2 } vbrAtmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "a maximum limit on how many retries. 0 indicates no limit." DEFVAL { 0 } ::= { vbrAtmSpvcVccActiveSvcEntry 3 } vbrAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "restart, the active SVC is released if necessary and a new setup procedure is begun; or noop" ::= { vbrAtmSpvcVccActiveSvcEntry 4 } vbrAtmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted." ::= { vbrAtmSpvcVccActiveSvcEntry 5 } vbrAtmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC" ::= { vbrAtmSpvcVccActiveSvcEntry 6 } vbrAtmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC" ::= { vbrAtmSpvcVccActiveSvcEntry 7 } atmSpvcVccRlsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of atmSpvcVccTable and is used to release a ATM-ATM SPVC connection without deleting the configured data." ::= { connectionConfig 23 } atmSpvcVccRlsEntry OBJECT-TYPE SYNTAX AtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of CES SPVC release table. This entry is created whenever an entry is created in atmSpvcVccTable." INDEX { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } ::= { atmSpvcVccRlsTable 1 } AtmSpvcVccRlsEntry ::= SEQUENCE { atmSpvcVccRelease INTEGER } atmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { atmSpvcVccRlsEntry 1 } cirEmAtmSpvcVccRlsTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of cirEmAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data." ::= { connectionConfig 24 } cirEmAtmSpvcVccRlsEntry OBJECT-TYPE SYNTAX CirEmAtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of CES SPVC release table. This entry is created whenever an entry is created in cirEmAtmSpvcVccTable." INDEX { cirEmAtmSpvcVccIfA } ::= { cirEmAtmSpvcVccRlsTable 1 } CirEmAtmSpvcVccRlsEntry ::= SEQUENCE { cirEmAtmSpvcVccRelease INTEGER } cirEmAtmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { cirEmAtmSpvcVccRlsEntry 1 } vbrAtmSpvcVccRlsTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of vbrAtmSpvcVccTable and is used to release a TE-ATM SPVC connection without deleting the configured data." ::= { connectionConfig 25 } vbrAtmSpvcVccRlsEntry OBJECT-TYPE SYNTAX VbrAtmSpvcVccRlsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of TE SPVC release table. This entry is created whenever an entry is created in vbrAtmSpvcVccTable." INDEX { vbrAtmSpvcVccIfA } ::= { vbrAtmSpvcVccRlsTable 1 } VbrAtmSpvcVccRlsEntry ::= SEQUENCE { vbrAtmSpvcVccRelease INTEGER } vbrAtmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { vbrAtmSpvcVccRlsEntry 1 } frAtmBkPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF FrAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage frame relay DHPVC backup pvc." ::= { connectionConfig 26 } frAtmBkPvcVccEntry OBJECT-TYPE SYNTAX FrAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the frame relay DHPVC table. There is one entry in the table corresponding to each active row in the frAtmPvcVccTable for which the frAtmPvcVccDualHomed object takes the value 'yes.'" INDEX { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } ::= { frAtmBkPvcVccTable 1 } FrAtmBkPvcVccEntry ::= SEQUENCE { frAtmBkPvcVccIfB IntfIndex, frAtmBkPvcVccVpiB INTEGER, frAtmBkPvcVccVciB INTEGER, frAtmBkPvcVccActivePvc INTEGER, frAtmBkPvcVccAutoSwitch INTEGER, frAtmBkPvcVccRowStatus RowStatus, frAtmBkPvcVccViB INTEGER, frAtmBkPvcVccVUNIB INTEGER, frAtmBkPvcVccConnFailureCauseB AtmConnFailureCause } frAtmBkPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frAtmBkPvcVccEntry 1 } frAtmBkPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { frAtmBkPvcVccEntry 2 } frAtmBkPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup frame relay-atm DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { frAtmBkPvcVccEntry 3 } frAtmBkPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { frAtmBkPvcVccEntry 4 } frAtmBkPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { frAtmBkPvcVccEntry 5 } frAtmBkPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { frAtmBkPvcVccEntry 6 } frAtmBkPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { frAtmBkPvcVccEntry 7 } frAtmBkPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { frAtmBkPvcVccEntry 8 } frAtmBkPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { frAtmBkPvcVccEntry 9 } atmBkPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage ATM to ATM DHPVC backup pvc." ::= { connectionConfig 27 } atmBkPvcVccEntry OBJECT-TYPE SYNTAX AtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVccTable for which the atmPvcVccDualHomed object takes the value 'yes'." INDEX { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } ::= { atmBkPvcVccTable 1 } AtmBkPvcVccEntry ::= SEQUENCE { atmBkPvcVccIfB IntfIndex, atmBkPvcVccVpiB INTEGER, atmBkPvcVccVciB INTEGER, atmBkPvcVccActivePvc INTEGER, atmBkPvcVccAutoSwitch INTEGER, atmBkPvcVccRowStatus RowStatus, atmBkPvcVccViB INTEGER, atmBkPvcVccVUNIB INTEGER, atmBkPvcVccConnFailureCauseB AtmConnFailureCause } atmBkPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmBkPvcVccEntry 1 } atmBkPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmBkPvcVccEntry 2 } atmBkPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup ATM-to-ATM DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmBkPvcVccEntry 3 } atmBkPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { atmBkPvcVccEntry 4 } atmBkPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { atmBkPvcVccEntry 5 } atmBkPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { atmBkPvcVccEntry 6 } atmBkPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmBkPvcVccEntry 7 } atmBkPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmBkPvcVccEntry 8 } atmBkPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { atmBkPvcVccEntry 9 } atmBkPvcVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmBkPvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage ATM to ATM DHPVC backup pvc." ::= { connectionConfig 28 } atmBkPvcVpcEntry OBJECT-TYPE SYNTAX AtmBkPvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ATM to ATM DHPVC table. There is one entry in the table corresponding to each active row in the atmPvcVpcTable for which the atmPvcVpcDualHomed object takes the value 'yes'." INDEX { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } ::= { atmBkPvcVpcTable 1 } AtmBkPvcVpcEntry ::= SEQUENCE { atmBkPvcVpcIfB IntfIndex, atmBkPvcVpcVpiB INTEGER, atmBkPvcVpcActivePvc INTEGER, atmBkPvcVpcAutoSwitch INTEGER, atmBkPvcVpcRowStatus RowStatus, atmBkPvcVpcViB INTEGER, atmBkPvcVpcVUNIB INTEGER, atmBkPvcVpcConnFailureCauseB AtmConnFailureCause } atmBkPvcVpcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmBkPvcVpcEntry 1 } atmBkPvcVpcVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B of an ATM-to-ATM PVC VPC backup DHPVC connection. Valid range is a number between 0 and 4095." ::= { atmBkPvcVpcEntry 2 } atmBkPvcVpcActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { atmBkPvcVpcEntry 3 } atmBkPvcVpcAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { atmBkPvcVpcEntry 4 } atmBkPvcVpcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { atmBkPvcVpcEntry 5 } atmBkPvcVpcViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmBkPvcVpcEntry 6 } atmBkPvcVpcVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmBkPvcVpcEntry 7 } atmBkPvcVpcConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { atmBkPvcVpcEntry 8 } bridgeAtmBkPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage bridge to atm DHPVC backup pvc." ::= { connectionConfig 29 } bridgeAtmBkPvcVccEntry OBJECT-TYPE SYNTAX BridgeAtmBkPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the bridge to atm DHPVC table. There is one entry in the table corresponding to each active row in the bridgeAtmPvcVccTable for which the bridgeAtmPvcVccDualHomed object takes the value 'yes'." INDEX { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } ::= { bridgeAtmBkPvcVccTable 1 } BridgeAtmBkPvcVccEntry ::= SEQUENCE { bridgeAtmBkPvcVccIfB IntfIndex, bridgeAtmBkPvcVccVpiB INTEGER, bridgeAtmBkPvcVccVciB INTEGER, bridgeAtmBkPvcVccActivePvc INTEGER, bridgeAtmBkPvcVccAutoSwitch INTEGER, bridgeAtmBkPvcVccRowStatus RowStatus, bridgeAtmBkPvcVccViB INTEGER, bridgeAtmBkPvcVccVUNIB INTEGER, bridgeAtmBkPvcVccConnFailureCauseB AtmConnFailureCause } bridgeAtmBkPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { bridgeAtmBkPvcVccEntry 1 } bridgeAtmBkPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { bridgeAtmBkPvcVccEntry 2 } bridgeAtmBkPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup bridge-atm DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { bridgeAtmBkPvcVccEntry 3 } bridgeAtmBkPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { bridgeAtmBkPvcVccEntry 4 } bridgeAtmBkPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { bridgeAtmBkPvcVccEntry 5 } bridgeAtmBkPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { bridgeAtmBkPvcVccEntry 6 } bridgeAtmBkPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { bridgeAtmBkPvcVccEntry 7 } bridgeAtmBkPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { bridgeAtmBkPvcVccEntry 8 } bridgeAtmBkPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { bridgeAtmBkPvcVccEntry 9 } ipAtmBkAppPvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAtmBkAppPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage in-band management to atm DHPVC backup pvc." ::= { connectionConfig 30 } ipAtmBkAppPvcVccEntry OBJECT-TYPE SYNTAX IpAtmBkAppPvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the in-band management to atm DHPVC table. There is one entry in the table corresponding to each active row in the ipAtmAppPvcVccTable for which the ipAtmAppPvcVccDualHomed object takes the value 'yes'." INDEX { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } ::= { ipAtmBkAppPvcVccTable 1 } IpAtmBkAppPvcVccEntry ::= SEQUENCE { ipAtmBkAppPvcVccIfB IntfIndex, ipAtmBkAppPvcVccVpiB INTEGER, ipAtmBkAppPvcVccVciB INTEGER, ipAtmBkAppPvcVccActivePvc INTEGER, ipAtmBkAppPvcVccAutoSwitch INTEGER, ipAtmBkAppPvcVccRowStatus RowStatus, ipAtmBkAppPvcVccViB INTEGER, ipAtmBkAppPvcVccVUNIB INTEGER, ipAtmBkAppPvcVccConnFailureCauseB AtmConnFailureCause } ipAtmBkAppPvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { ipAtmBkAppPvcVccEntry 1 } ipAtmBkAppPvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 4095." ::= { ipAtmBkAppPvcVccEntry 2 } ipAtmBkAppPvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value for side B, the atm side, of a backup in-band management-atm DHPVC VCC connection. Valid range is a number between 0 and 65535." ::= { ipAtmBkAppPvcVccEntry 3 } ipAtmBkAppPvcVccActivePvc OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active PVC." DEFVAL { none } ::= { ipAtmBkAppPvcVccEntry 4 } ipAtmBkAppPvcVccAutoSwitch OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto switch back to primary link when primary link is recovered." DEFVAL { yes } ::= { ipAtmBkAppPvcVccEntry 5 } ipAtmBkAppPvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { ipAtmBkAppPvcVccEntry 6 } ipAtmBkAppPvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmBkAppPvcVccEntry 7 } ipAtmBkAppPvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { ipAtmBkAppPvcVccEntry 8 } ipAtmBkAppPvcVccConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { ipAtmBkAppPvcVccEntry 9 } spvcAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SpvcAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC network interface addresses." ::= { connectionConfig 31 } spvcAddrEntry OBJECT-TYPE SYNTAX SpvcAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of SPVC address table." INDEX { spvcAddrIfA } ::= { spvcAddrTable 1 } SpvcAddrEntry ::= SEQUENCE { spvcAddrIfA IntfIndex, spvcAddrLocalPortAddr OCTET STRING, spvcAddrRowStatus RowStatus } spvcAddrIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an SPVC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { spvcAddrEntry 1 } spvcAddrLocalPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Local port NSAP address." ::= { spvcAddrEntry 2 } spvcAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to configure a NSAP address on the local port. Only when the address is configured can SPVC connections be established." ::= { spvcAddrEntry 3 } frAtmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF FrAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of frame relay to ATM IWF connections" ::= { connectionConfig 32 } frAtmSpvcVccEntry OBJECT-TYPE SYNTAX FrAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of frame relay to ATM IWF connections " INDEX { spvcAddrIfA, frAtmSpvcVccDlciA} ::= { frAtmSpvcVccTable 1 } FrAtmSpvcVccEntry ::= SEQUENCE { frAtmSpvcVccDlciA Integer32, frAtmSpvcVccIfB IntfIndex, frAtmSpvcVccVpiB INTEGER, frAtmSpvcVccVciB INTEGER, frAtmSpvcVccMaxFrameSizeIn Integer32, frAtmSpvcVccBcIn Integer32, frAtmSpvcVccBeIn Integer32, frAtmSpvcVccCirIn Integer32, frAtmSpvcVccMaxFrameSizeOut Integer32, frAtmSpvcVccBcOut Integer32, frAtmSpvcVccBeOut Integer32, frAtmSpvcVccCirOut Integer32, frAtmSpvcVccServiceType INTEGER, frAtmSpvcVccFlow INTEGER, frAtmSpvcVccTimeLenIn INTEGER, frAtmSpvcVccTimeLenOut INTEGER, frAtmSpvcVccPeakCellRateA2B Integer32, frAtmSpvcVccSusCellRateA2B Integer32, frAtmSpvcVccMaxBurstSizeA2B Integer32, frAtmSpvcVccPeakCellRateB2A Integer32, frAtmSpvcVccSusCellRateB2A Integer32, frAtmSpvcVccMaxBurstSizeB2A Integer32, frAtmSpvcVccInterWorkingFunc INTEGER, frAtmSpvcVccConnType INTEGER, frAtmSpvcVccOperStatus INTEGER, frAtmSpvcVccRowStatus RowStatus, frAtmSpvcVccRemoteFrPortAddr OCTET STRING, frAtmSpvcVccRemoteSelectType INTEGER, frAtmSpvcVccRemoteDlci INTEGER, frAtmSpvcVccRemoteVpi INTEGER, frAtmSpvcVccRemoteVci INTEGER, frAtmSpvcVccRetryInterval INTEGER, frAtmSpvcVccRetryLimit INTEGER, frAtmSpvcVccRestart INTEGER, frAtmSpvcVccRetryFailure Integer32, frAtmSpvcVccReleaseCause INTEGER, frAtmSpvcVccReleaseDiag OCTET STRING, frAtmSpvcVccRelease INTEGER, frAtmSpvcVccStatsCellsEncodedHiA Integer32, frAtmSpvcVccStatsCellsEncodedLoA Integer32, frAtmSpvcVccStatsCellsDecodedHiA Integer32, frAtmSpvcVccStatsCellsDecodedLoA Integer32, frAtmSpvcVccStatsInCellCountHiB Integer32, frAtmSpvcVccStatsInCellCountLoB Integer32, frAtmSpvcVccStatsOutCellCountHiB Integer32, frAtmSpvcVccStatsOutCellCountLoB Integer32, frAtmSpvcVccStatsTimer Integer32, frAtmSpvcVccStatsFramesDroppedA Integer32, frAtmSpvcVccStatsOdometerCellsEncodedHiA Integer32, frAtmSpvcVccStatsOdometerCellsEncodedLoA Integer32, frAtmSpvcVccStatsOdometerCellsDecodedHiA Integer32, frAtmSpvcVccStatsOdometerCellsDecodedLoA Integer32, frAtmSpvcVccStatsInOdometerCellCountHiB Integer32, frAtmSpvcVccStatsInOdometerCellCountLoB Integer32, frAtmSpvcVccStatsOutOdometerCellCountHiB Integer32, frAtmSpvcVccStatsOutOdometerCellCountLoB Integer32, frAtmSpvcVccStatsOdometerTimer Integer32, frAtmSpvcVccStatsOdometerReset INTEGER, frAtmSpvcVccStatsAal5ErrFramesA Integer32, frAtmSpvcVccStatsFramesTaggedA Integer32, frAtmSpvcVccStatsCellsDroppedB Integer32, frAtmSpvcVccStatsCellsTaggedB Integer32 ,frAtmSpvcVccVUNIB INTEGER ,frAtmSpvcVccTrafficShapingA2B INTEGER ,frAtmSpvcVccPriority INTEGER } frAtmSpvcVccDlciA OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 1023." ::= { frAtmSpvcVccEntry 1 } frAtmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { frAtmSpvcVccEntry 2 } frAtmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { frAtmSpvcVccEntry 3 } frAtmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { frAtmSpvcVccEntry 4 } frAtmSpvcVccMaxFrameSizeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmSpvcVccEntry 5 } frAtmSpvcVccBcIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 6 } frAtmSpvcVccBeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress direction (into the frame relay UNI)." DEFVAL { 45000000 } ::= { frAtmSpvcVccEntry 7 } frAtmSpvcVccCirIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 8 } frAtmSpvcVccMaxFrameSizeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmSpvcVccEntry 9 } frAtmSpvcVccBcOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 10 } frAtmSpvcVccBeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress direction (into the frame relay UNI)" DEFVAL { 45000000 } ::= { frAtmSpvcVccEntry 11 } frAtmSpvcVccCirOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in the egress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 12 } frAtmSpvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type, Frame relay traffic is carried by VBR type of service only." DEFVAL { ubr } ::= { frAtmSpvcVccEntry 13 } frAtmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type" DEFVAL { duplex } ::= { frAtmSpvcVccEntry 14 } frAtmSpvcVccTimeLenIn OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmSpvcVccEntry 15 } frAtmSpvcVccTimeLenOut OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmSpvcVccEntry 16 } frAtmSpvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 17 } frAtmSpvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 18 } frAtmSpvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 19 } frAtmSpvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 20 } frAtmSpvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 21 } frAtmSpvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { frAtmSpvcVccEntry 22 } frAtmSpvcVccInterWorkingFunc OBJECT-TYPE SYNTAX INTEGER { frf8-Transl(1), frf8-Pass(2), frf5(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "InterWorking function." DEFVAL { frf8-Transl } ::= { frAtmSpvcVccEntry 23 } frAtmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER{ activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls" ::= { frAtmSpvcVccEntry 24 } frAtmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational." ::= { frAtmSpvcVccEntry 25 } frAtmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { frAtmSpvcVccEntry 26 } frAtmSpvcVccRemoteFrPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the active SVC are initiated." ::= { frAtmSpvcVccEntry 27 } frAtmSpvcVccRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the DLCI/VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same DLCI/VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: frAtmSpvcVccRemoteDlci or frAtmSpvcVccRemoteVpi and frAtmSpvcVccRemoteVci, must be supplied and are used at the destination." ::= { frAtmSpvcVccEntry 28 } frAtmSpvcVccRemoteDlci OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { frAtmSpvcVccEntry 29 } frAtmSpvcVccRemoteVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { frAtmSpvcVccEntry 30 } frAtmSpvcVccRemoteVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { frAtmSpvcVccEntry 31 } frAtmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted immediately." DEFVAL { 10 } ::= { frAtmSpvcVccEntry 32 } frAtmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries. 0 indicates no limit." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 33 } frAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "restart, the active SVC is released if necessary and a new setup procedure is begun; or noop" ::= { frAtmSpvcVccEntry 34 } frAtmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted." ::= { frAtmSpvcVccEntry 35 } frAtmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { frAtmSpvcVccEntry 36 } frAtmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { frAtmSpvcVccEntry 37 } frAtmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { frAtmSpvcVccEntry 38 } frAtmSpvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { frAtmSpvcVccEntry 39 } frAtmSpvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { frAtmSpvcVccEntry 40 } frAtmSpvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { frAtmSpvcVccEntry 41 } frAtmSpvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { frAtmSpvcVccEntry 42 } frAtmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmSpvcVccEntry 43 } frAtmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmSpvcVccEntry 44 } frAtmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmSpvcVccEntry 45 } frAtmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmSpvcVccEntry 46 } frAtmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { frAtmSpvcVccEntry 47 } frAtmSpvcVccStatsFramesDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side." ::= { frAtmSpvcVccEntry 48 } frAtmSpvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { frAtmSpvcVccEntry 49 } frAtmSpvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { frAtmSpvcVccEntry 50 } frAtmSpvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { frAtmSpvcVccEntry 51 } frAtmSpvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { frAtmSpvcVccEntry 52 } frAtmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmSpvcVccEntry 53 } frAtmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmSpvcVccEntry 54 } frAtmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmSpvcVccEntry 55 } frAtmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmSpvcVccEntry 56 } frAtmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { frAtmSpvcVccEntry 57 } frAtmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { frAtmSpvcVccEntry 58 } frAtmSpvcVccStatsAal5ErrFramesA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side" ::= { frAtmSpvcVccEntry 59 } frAtmSpvcVccStatsFramesTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side" ::= { frAtmSpvcVccEntry 60 } frAtmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { frAtmSpvcVccEntry 61 } frAtmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { frAtmSpvcVccEntry 62 } frAtmSpvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { frAtmSpvcVccEntry 63 } frAtmSpvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { frAtmSpvcVccEntry 64 } frAtmSpvcVccPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of SPVC - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { frAtmSpvcVccEntry 65 } atmAtmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC ATM virtual channel connections." ::= { connectionConfig 33 } atmAtmSpvcVccEntry OBJECT-TYPE SYNTAX AtmAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of ATM SPVC VCC connections." INDEX { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr } ::= { atmAtmSpvcVccTable 1 } AtmAtmSpvcVccEntry ::= SEQUENCE { atmAtmSpvcVccVpiA INTEGER, atmAtmSpvcVccVciA INTEGER, atmAtmSpvcVccRemoteAtmPortAddr OCTET STRING, atmAtmSpvcVccIfB IntfIndex, atmAtmSpvcVccVpiB INTEGER, atmAtmSpvcVccVciB INTEGER, atmAtmSpvcVccServiceTypeA2B INTEGER, atmAtmSpvcVccSarTypeA2B INTEGER, atmAtmSpvcVccPeakCellRateA2B Integer32, atmAtmSpvcVccSusCellRateA2B Integer32, atmAtmSpvcVccMaxBurstSizeA2B Integer32, atmAtmSpvcVccFrwdErrCorrectionA2B INTEGER, atmAtmSpvcVccServiceTypeB2A INTEGER, atmAtmSpvcVccSarTypeB2A INTEGER, atmAtmSpvcVccPeakCellRateB2A Integer32, atmAtmSpvcVccSusCellRateB2A Integer32, atmAtmSpvcVccMaxBurstSizeB2A Integer32, atmAtmSpvcVccFrwdErrCorrectionB2A INTEGER, atmAtmSpvcVccFlow INTEGER, atmAtmSpvcVccType INTEGER, atmAtmSpvcVccConnType INTEGER, atmAtmSpvcVccLeafReference INTEGER, atmAtmSpvcVccOperStatus INTEGER, atmAtmSpvcVccRowStatus RowStatus, atmAtmSpvcVccRemoteSelectType INTEGER, atmAtmSpvcVccRemoteVpi INTEGER, atmAtmSpvcVccRemoteVci INTEGER, atmAtmSpvcVccRetryInterval INTEGER, atmAtmSpvcVccRetryLimit INTEGER, atmAtmSpvcVccRestart INTEGER, atmAtmSpvcVccRetryFailure Integer32, atmAtmSpvcVccReleaseCause INTEGER, atmAtmSpvcVccReleaseDiag OCTET STRING, atmAtmSpvcVccRelease INTEGER, atmAtmSpvcVccStatsInCellCountHiA Integer32, atmAtmSpvcVccStatsInCellCountLoA Integer32, atmAtmSpvcVccStatsOutCellCountHiA Integer32, atmAtmSpvcVccStatsOutCellCountLoA Integer32, atmAtmSpvcVccStatsInCellCountHiB Integer32, atmAtmSpvcVccStatsInCellCountLoB Integer32, atmAtmSpvcVccStatsOutCellCountHiB Integer32, atmAtmSpvcVccStatsOutCellCountLoB Integer32, atmAtmSpvcVccStatsTimer Integer32, atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B INTEGER, atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A INTEGER, atmAtmSpvcVccStatsInOdometerCellCountHiA Integer32, atmAtmSpvcVccStatsInOdometerCellCountLoA Integer32, atmAtmSpvcVccStatsOutOdometerCellCountHiA Integer32, atmAtmSpvcVccStatsOutOdometerCellCountLoA Integer32, atmAtmSpvcVccStatsInOdometerCellCountHiB Integer32, atmAtmSpvcVccStatsInOdometerCellCountLoB Integer32, atmAtmSpvcVccStatsOutOdometerCellCountHiB Integer32, atmAtmSpvcVccStatsOutOdometerCellCountLoB Integer32, atmAtmSpvcVccStatsOdometerTimer Integer32, atmAtmSpvcVccStatsOdometerReset INTEGER, atmAtmSpvcVccViA INTEGER, atmAtmSpvcVccViB INTEGER, atmAtmSpvcVccStatsCellsDroppedA Integer32, atmAtmSpvcVccStatsCellsTaggedA Integer32, atmAtmSpvcVccStatsCellsDroppedB Integer32, atmAtmSpvcVccStatsCellsTaggedB Integer32 ,atmAtmSpvcVccVUNIA INTEGER, atmAtmSpvcVccVUNIB INTEGER, atmAtmSpvcVccTrafficShapingA2B INTEGER, atmAtmSpvcVccTrafficShapingB2A INTEGER, atmAtmSpvcVccPriority INTEGER } atmAtmSpvcVccVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmAtmSpvcVccEntry 1 } atmAtmSpvcVccVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmAtmSpvcVccEntry 2 } atmAtmSpvcVccRemoteAtmPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote ATM port NSAP address, not meaningful if passive type of connection." ::= { atmAtmSpvcVccEntry 3 } atmAtmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmAtmSpvcVccEntry 4 } atmAtmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmAtmSpvcVccEntry 5 } atmAtmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmAtmSpvcVccEntry 6 } atmAtmSpvcVccServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM port." DEFVAL { ubr } ::= { atmAtmSpvcVccEntry 7 } atmAtmSpvcVccSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM port." DEFVAL { null } ::= { atmAtmSpvcVccEntry 8 } atmAtmSpvcVccPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 9 } atmAtmSpvcVccSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 10 } atmAtmSpvcVccMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 11 } atmAtmSpvcVccFrwdErrCorrectionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM port side." DEFVAL { none } ::= { atmAtmSpvcVccEntry 12 } atmAtmSpvcVccServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM trunk side." DEFVAL { ubr } ::= { atmAtmSpvcVccEntry 13 } atmAtmSpvcVccSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM trunk side." DEFVAL { null } ::= { atmAtmSpvcVccEntry 14 } atmAtmSpvcVccPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 15 } atmAtmSpvcVccSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 16 } atmAtmSpvcVccMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVccEntry 17 } atmAtmSpvcVccFrwdErrCorrectionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM trunk side." DEFVAL { none } ::= { atmAtmSpvcVccEntry 18 } atmAtmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4), pointToMultipointB2A(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of flow, pointToMultipointA2B is for future support." DEFVAL { duplex } ::= { atmAtmSpvcVccEntry 19 } atmAtmSpvcVccType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of connection." DEFVAL { nonsecured } ::= { atmAtmSpvcVccEntry 20 } atmAtmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER { activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls." ::= { atmAtmSpvcVccEntry 21 } atmAtmSpvcVccLeafReference OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1." ::= { atmAtmSpvcVccEntry 22 } atmAtmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational." ::= { atmAtmSpvcVccEntry 23 } atmAtmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released." ::= { atmAtmSpvcVccEntry 24 } atmAtmSpvcVccRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVccRemoteVpi and atmAtmSpvcVccRemoteVci, must be supplied and are used at the destination." ::= { atmAtmSpvcVccEntry 25 } atmAtmSpvcVccRemoteVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { atmAtmSpvcVccEntry 26 } atmAtmSpvcVccRemoteVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSpvcVccRemoteSelectType is configured as 'any', then this value is not relevant." ::= { atmAtmSpvcVccEntry 27 } atmAtmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately." ::= { atmAtmSpvcVccEntry 28 } atmAtmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries should be attempted. A value of 0 indicates no limit." ::= { atmAtmSpvcVccEntry 29 } atmAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmAtmSpvcVccEntry 30 } atmAtmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted." ::= { atmAtmSpvcVccEntry 31 } atmAtmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { atmAtmSpvcVccEntry 32 } atmAtmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { atmAtmSpvcVccEntry 33 } atmAtmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { atmAtmSpvcVccEntry 34 } atmAtmSpvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (High order portion)" ::= { atmAtmSpvcVccEntry 35 } atmAtmSpvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (Low order portion) " ::= { atmAtmSpvcVccEntry 36 } atmAtmSpvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(High order portion)" ::= { atmAtmSpvcVccEntry 37 } atmAtmSpvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(Low order portion)" ::= { atmAtmSpvcVccEntry 38 } atmAtmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { atmAtmSpvcVccEntry 39 } atmAtmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion) " ::= { atmAtmSpvcVccEntry 40 } atmAtmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(High order portion)" ::= { atmAtmSpvcVccEntry 41 } atmAtmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(Low order portion)" ::= { atmAtmSpvcVccEntry 42 } atmAtmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmAtmSpvcVccEntry 43 } atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVccEntry 44 } atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVccEntry 45 } atmAtmSpvcVccStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVccEntry 46 } atmAtmSpvcVccStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 47 } atmAtmSpvcVccStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 48 } atmAtmSpvcVccStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 49 } atmAtmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVccEntry 50 } atmAtmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 51 } atmAtmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 52 } atmAtmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVccEntry 53 } atmAtmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmAtmSpvcVccEntry 54 } atmAtmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmAtmSpvcVccEntry 55 } atmAtmSpvcVccViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmAtmSpvcVccEntry 56 } atmAtmSpvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmAtmSpvcVccEntry 57 } atmAtmSpvcVccStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmAtmSpvcVccEntry 58 } atmAtmSpvcVccStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmAtmSpvcVccEntry 59 } atmAtmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmAtmSpvcVccEntry 60 } atmAtmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmAtmSpvcVccEntry 61 } atmAtmSpvcVccVUNIA OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmAtmSpvcVccEntry 62 } atmAtmSpvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmAtmSpvcVccEntry 63 } atmAtmSpvcVccTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmAtmSpvcVccEntry 64 } atmAtmSpvcVccTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmAtmSpvcVccEntry 65 } atmAtmSpvcVccPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of SPVC - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { atmAtmSpvcVccEntry 66 } cirAtmSpvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF CirAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Circuit Emulation to ATM Soft PVCs." ::= { connectionConfig 34 } cirAtmSpvcVccEntry OBJECT-TYPE SYNTAX CirAtmSpvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of circuit emulation to ATM SPVC connections." INDEX { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr } ::= { cirAtmSpvcVccTable 1 } CirAtmSpvcVccEntry ::= SEQUENCE { cirAtmSpvcVccRemoteCePortAddr OCTET STRING, cirAtmSpvcVccIfB IntfIndex, cirAtmSpvcVccVpiB INTEGER, cirAtmSpvcVccVciB INTEGER, cirAtmSpvcVccVoiceCompressionA2B INTEGER, cirAtmSpvcVccSilenceDetectionA2B INTEGER, cirAtmSpvcVccEchoCancellationA2B INTEGER, cirAtmSpvcVccCngToneDetectionA2B INTEGER, cirAtmSpvcVccCodingTranslationA2B INTEGER, cirAtmSpvcVccVoiceCompressionB2A INTEGER, cirAtmSpvcVccSilenceDetectionB2A INTEGER, cirAtmSpvcVccEchoCancellationB2A INTEGER, cirAtmSpvcVccCngToneDetectionB2A INTEGER, cirAtmSpvcVccCodingTranslationB2A INTEGER, cirAtmSpvcVccFlow INTEGER, cirAtmSpvcVccServiceType INTEGER, cirAtmSpvcVccConnType INTEGER, cirAtmSpvcVccOperStatus INTEGER, cirAtmSpvcVccRowStatus RowStatus, cirAtmSpvcVccViB INTEGER, cirAtmSpvcVccRetryInterval INTEGER, cirAtmSpvcVccRetryLimit INTEGER, cirAtmSpvcVccRestart INTEGER, cirAtmSpvcVccRetryFailure Integer32, cirAtmSpvcVccReleaseCause INTEGER, cirAtmSpvcVccReleaseDiag OCTET STRING, cirAtmSpvcVccRelease INTEGER, cirAtmSpvcVccStatsCellsEncodedHiA Integer32, cirAtmSpvcVccStatsCellsEncodedLoA Integer32, cirAtmSpvcVccStatsCellsDecodedHiA Integer32, cirAtmSpvcVccStatsCellsDecodedLoA Integer32, cirAtmSpvcVccStatsInCellCountHiB Integer32, cirAtmSpvcVccStatsInCellCountLoB Integer32, cirAtmSpvcVccStatsOutCellCountHiB Integer32, cirAtmSpvcVccStatsOutCellCountLoB Integer32, cirAtmSpvcVccStatsTimer Integer32, cirAtmSpvcVccStatsOdometerCellsEncodedHiA Integer32, cirAtmSpvcVccStatsOdometerCellsEncodedLoA Integer32, cirAtmSpvcVccStatsOdometerCellsDecodedHiA Integer32, cirAtmSpvcVccStatsOdometerCellsDecodedLoA Integer32, cirAtmSpvcVccStatsInOdometerCellCountHiB Integer32, cirAtmSpvcVccStatsInOdometerCellCountLoB Integer32, cirAtmSpvcVccStatsOutOdometerCellCountHiB Integer32, cirAtmSpvcVccStatsOutOdometerCellCountLoB Integer32, cirAtmSpvcVccStatsOdometerTimer Integer32, cirAtmSpvcVccStatsOdometerReset INTEGER, cirAtmSpvcVccStatsCellsDroppedB Integer32, cirAtmSpvcVccStatsCellsTaggedB Integer32, cirAtmSpvcVccVUNIB INTEGER, cirAtmSpvcVccSarTypeB Integer32, cirAtmSpvcVccPriority INTEGER } cirAtmSpvcVccRemoteCePortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated." ::= { cirAtmSpvcVccEntry 1 } cirAtmSpvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirAtmSpvcVccEntry 2 } cirAtmSpvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { cirAtmSpvcVccEntry 3 } cirAtmSpvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { cirAtmSpvcVccEntry 4 } cirAtmSpvcVccVoiceCompressionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirAtmSpvcVccEntry 5 } cirAtmSpvcVccSilenceDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirAtmSpvcVccEntry 6 } cirAtmSpvcVccEchoCancellationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirAtmSpvcVccEntry 7 } cirAtmSpvcVccCngToneDetectionA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM" DEFVAL { disabled } ::= { cirAtmSpvcVccEntry 8 } cirAtmSpvcVccCodingTranslationA2B OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirAtmSpvcVccEntry 9 } cirAtmSpvcVccVoiceCompressionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { cirAtmSpvcVccEntry 10 } cirAtmSpvcVccSilenceDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { cirAtmSpvcVccEntry 11 } cirAtmSpvcVccEchoCancellationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { cirAtmSpvcVccEntry 12 } cirAtmSpvcVccCngToneDetectionB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2), g726-32k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm, one of the enum value, g726-32k(3) is obsoleted on 01Mar99 such that user would not be able to configure CE-ATM" DEFVAL { disabled } ::= { cirAtmSpvcVccEntry 13 } cirAtmSpvcVccCodingTranslationB2A OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { cirAtmSpvcVccEntry 14 } cirAtmSpvcVccFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3), pointToMultipointA2B(4), pointToMultipointB2A(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type, pointToMultipointA2B and pointToMultipointB2A are for future support." DEFVAL { duplex } ::= { cirAtmSpvcVccEntry 15 } cirAtmSpvcVccServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-2(2), cbr-3(3), cbr-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" ::= { cirAtmSpvcVccEntry 16 } cirAtmSpvcVccConnType OBJECT-TYPE SYNTAX INTEGER{ activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls" ::= { cirAtmSpvcVccEntry 17 } cirAtmSpvcVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational." ::= { cirAtmSpvcVccEntry 18 } cirAtmSpvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released." ::= { cirAtmSpvcVccEntry 19 } cirAtmSpvcVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { cirAtmSpvcVccEntry 20 } cirAtmSpvcVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately." DEFVAL { 10 } ::= { cirAtmSpvcVccEntry 21 } cirAtmSpvcVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries. 0 indicates no limit." DEFVAL { 0 } ::= { cirAtmSpvcVccEntry 22 } cirAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "restart, the active SVC is released if necessary and a new setup procedure is begun; or noop" ::= { cirAtmSpvcVccEntry 23 } cirAtmSpvcVccRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted." ::= { cirAtmSpvcVccEntry 24 } cirAtmSpvcVccReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { cirAtmSpvcVccEntry 25 } cirAtmSpvcVccReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { cirAtmSpvcVccEntry 26 } cirAtmSpvcVccRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { cirAtmSpvcVccEntry 27 } cirAtmSpvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion )" ::= { cirAtmSpvcVccEntry 28 } cirAtmSpvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A - ( Low order portion) " ::= { cirAtmSpvcVccEntry 29 } cirAtmSpvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - ( High order portion) " ::= { cirAtmSpvcVccEntry 30 } cirAtmSpvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (Low order portion) " ::= { cirAtmSpvcVccEntry 31 } cirAtmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { cirAtmSpvcVccEntry 32 } cirAtmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion) " ::= { cirAtmSpvcVccEntry 33 } cirAtmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B- (High order portion)" ::= { cirAtmSpvcVccEntry 34 } cirAtmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(Low order portion)" ::= { cirAtmSpvcVccEntry 35 } cirAtmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since stats have been collecting" ::= { cirAtmSpvcVccEntry 36 } cirAtmSpvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { cirAtmSpvcVccEntry 37 } cirAtmSpvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { cirAtmSpvcVccEntry 38 } cirAtmSpvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { cirAtmSpvcVccEntry 39 } cirAtmSpvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { cirAtmSpvcVccEntry 40 } cirAtmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirAtmSpvcVccEntry 41 } cirAtmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirAtmSpvcVccEntry 42 } cirAtmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirAtmSpvcVccEntry 43 } cirAtmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirAtmSpvcVccEntry 44 } cirAtmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { cirAtmSpvcVccEntry 45 } cirAtmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { cirAtmSpvcVccEntry 46 } cirAtmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { cirAtmSpvcVccEntry 47 } cirAtmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { cirAtmSpvcVccEntry 48 } cirAtmSpvcVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { cirAtmSpvcVccEntry 49 } cirAtmSpvcVccSarTypeB OBJECT-TYPE SYNTAX INTEGER { aal1(1), aal2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field will only be used when selecting voice compression, in other cases it will be set to aal1." DEFVAL { aal1 } ::= { cirAtmSpvcVccEntry 50 } cirAtmSpvcVccPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of SPVC - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { cirAtmSpvcVccEntry 51 } vbrAtmSpvcTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmSpvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC atm virtual channel connections" ::= { connectionConfig 35 } vbrAtmSpvcEntry OBJECT-TYPE SYNTAX VbrAtmSpvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm SPVC VCC connections" INDEX { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr } ::= { vbrAtmSpvcTable 1 } VbrAtmSpvcEntry ::= SEQUENCE { vbrAtmSpvcRemoteVbrPortAddr OCTET STRING, vbrAtmSpvcIfB IntfIndex, vbrAtmSpvcVpiB INTEGER, vbrAtmSpvcVciB INTEGER, vbrAtmSpvcServiceType INTEGER, vbrAtmSpvcPeakCellRateA2B Integer32, vbrAtmSpvcSusCellRateA2B Integer32, vbrAtmSpvcMaxBurstSizeA2B Integer32, vbrAtmSpvcPeakCellRateB2A Integer32, vbrAtmSpvcSusCellRateB2A Integer32, vbrAtmSpvcMaxBurstSizeB2A Integer32, vbrAtmSpvcFlow INTEGER, vbrAtmSpvcConnType INTEGER, vbrAtmSpvcOperStatus INTEGER, vbrAtmSpvcRowStatus RowStatus, vbrAtmSpvcViB INTEGER, vbrAtmSpvcRetryInterval INTEGER, vbrAtmSpvcRetryLimit INTEGER, vbrAtmSpvcRestart INTEGER, vbrAtmSpvcRetryFailure Integer32, vbrAtmSpvcReleaseCause INTEGER, vbrAtmSpvcReleaseDiag OCTET STRING, vbrAtmSpvcRelease INTEGER, vbrAtmSpvcStatsCellsEncodedHiA Integer32, vbrAtmSpvcStatsCellsEncodedLoA Integer32, vbrAtmSpvcStatsCellsDecodedHiA Integer32, vbrAtmSpvcStatsCellsDecodedLoA Integer32, vbrAtmSpvcStatsInCellCountHiB Integer32, vbrAtmSpvcStatsInCellCountLoB Integer32, vbrAtmSpvcStatsOutCellCountHiB Integer32, vbrAtmSpvcStatsOutCellCountLoB Integer32, vbrAtmSpvcStatsTimer Integer32, vbrAtmSpvcStatsOdometerCellsEncodedHiA Integer32, vbrAtmSpvcStatsOdometerCellsEncodedLoA Integer32, vbrAtmSpvcStatsOdometerCellsDecodedHiA Integer32, vbrAtmSpvcStatsOdometerCellsDecodedLoA Integer32, vbrAtmSpvcStatsInOdometerCellCountHiB Integer32, vbrAtmSpvcStatsInOdometerCellCountLoB Integer32, vbrAtmSpvcStatsOutOdometerCellCountHiB Integer32, vbrAtmSpvcStatsOutOdometerCellCountLoB Integer32, vbrAtmSpvcStatsOdometerTimer Integer32, vbrAtmSpvcStatsOdometerReset INTEGER, vbrAtmSpvcStatsCellsDroppedB Integer32, vbrAtmSpvcStatsCellsTaggedB Integer32 ,vbrAtmSpvcVUNIB INTEGER, vbrAtmSpvcTrafficShapingA2B INTEGER, vbrAtmSpvcPriority INTEGER } vbrAtmSpvcRemoteVbrPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "remote VBR port nsap address implemening IWF, not meaningful if passive type of connection" ::= { vbrAtmSpvcEntry 1 } vbrAtmSpvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcEntry 2 } vbrAtmSpvcVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { vbrAtmSpvcEntry 3 } vbrAtmSpvcVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { vbrAtmSpvcEntry 4 } vbrAtmSpvcServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt1(2), vbr-nrt2(3), vbr-rt1(4), vbr-rt2(5), vbr-express(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "service type" DEFVAL { ubr } ::= { vbrAtmSpvcEntry 5 } vbrAtmSpvcPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmSpvcEntry 6 } vbrAtmSpvcSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side A, in cell per second" DEFVAL { 1 } ::= { vbrAtmSpvcEntry 7 } vbrAtmSpvcMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side A, in cells" DEFVAL { 1 } ::= { vbrAtmSpvcEntry 8 } vbrAtmSpvcPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - side B, ATM trunk, in cell per second." DEFVAL { 1 } ::= { vbrAtmSpvcEntry 9 } vbrAtmSpvcSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - side B, ATM trunk, in cell per second." DEFVAL { 1 } ::= { vbrAtmSpvcEntry 10 } vbrAtmSpvcMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - side B, ATM trunk, in cells." DEFVAL { 1 } ::= { vbrAtmSpvcEntry 11 } vbrAtmSpvcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), simplexB2A(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of flow" DEFVAL { duplex } ::= { vbrAtmSpvcEntry 12 } vbrAtmSpvcConnType OBJECT-TYPE SYNTAX INTEGER{ activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls" ::= { vbrAtmSpvcEntry 13 } vbrAtmSpvcOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing; connected - connection is currently operational; retriesExhausted - retry limit has been reached and call attempts have ceased; noAddressSupplied - no remote address has been configured, so no call attempts are initiated; lowerLayerDown - SPVC handler is not operational." ::= { vbrAtmSpvcEntry 14 } vbrAtmSpvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progess is released." ::= { vbrAtmSpvcEntry 15 } vbrAtmSpvcViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { vbrAtmSpvcEntry 16 } vbrAtmSpvcRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted immediately." DEFVAL { 10 } ::= { vbrAtmSpvcEntry 17 } vbrAtmSpvcRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "a maximum limit on how many retries. 0 indicates no limit." DEFVAL { 0 } ::= { vbrAtmSpvcEntry 18 } vbrAtmSpvcRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "restart, the active SVC is released if necessary and a new setup procedure is begun; or noop" ::= { vbrAtmSpvcEntry 19 } vbrAtmSpvcRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SVC is restarted." ::= { vbrAtmSpvcEntry 20 } vbrAtmSpvcReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC" ::= { vbrAtmSpvcEntry 21 } vbrAtmSpvcReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC" ::= { vbrAtmSpvcEntry 22 } vbrAtmSpvcRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { vbrAtmSpvcEntry 23 } vbrAtmSpvcStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { vbrAtmSpvcEntry 24 } vbrAtmSpvcStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ells encoded on side A - (Low order portion)" ::= { vbrAtmSpvcEntry 25 } vbrAtmSpvcStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (High order portion)" ::= { vbrAtmSpvcEntry 26 } vbrAtmSpvcStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (Low order portion)" ::= { vbrAtmSpvcEntry 27 } vbrAtmSpvcStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { vbrAtmSpvcEntry 28} vbrAtmSpvcStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion)" ::= { vbrAtmSpvcEntry 29 } vbrAtmSpvcStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(High order portion)" ::= { vbrAtmSpvcEntry 30 } vbrAtmSpvcStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B - (Low order portion)" ::= { vbrAtmSpvcEntry 31 } vbrAtmSpvcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { vbrAtmSpvcEntry 32 } vbrAtmSpvcStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { vbrAtmSpvcEntry 33 } vbrAtmSpvcStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { vbrAtmSpvcEntry 34 } vbrAtmSpvcStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrAtmSpvcEntry 35 } vbrAtmSpvcStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { vbrAtmSpvcEntry 36 } vbrAtmSpvcStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { vbrAtmSpvcEntry 37 } vbrAtmSpvcStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion)" ::= { vbrAtmSpvcEntry 38 } vbrAtmSpvcStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells transmitted on B -(High order portion)" ::= { vbrAtmSpvcEntry 39 } vbrAtmSpvcStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells transmitted on B -(Low order portion)" ::= { vbrAtmSpvcEntry 40 } vbrAtmSpvcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { vbrAtmSpvcEntry 41 } vbrAtmSpvcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { vbrAtmSpvcEntry 42 } vbrAtmSpvcStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { vbrAtmSpvcEntry 43 } vbrAtmSpvcStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { vbrAtmSpvcEntry 44 } vbrAtmSpvcVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { vbrAtmSpvcEntry 45 } vbrAtmSpvcTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { vbrAtmSpvcEntry 46 } vbrAtmSpvcPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of SPVC - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { vbrAtmSpvcEntry 47 } aal2TrunkConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Aal2TrunkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of terminal emulation to ATM network IWF connections " ::= { connectionConfig 36 } aal2TrunkConfigEntry OBJECT-TYPE SYNTAX Aal2TrunkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of terminal emulation to ATM network IWF connections" INDEX { aal2TrunkConfigIf, aal2TrunkConfigVpi, aal2TrunkConfigVci } ::= { aal2TrunkConfigTable 1 } Aal2TrunkConfigEntry ::= SEQUENCE { aal2TrunkConfigIf IntfIndex, aal2TrunkConfigVpi INTEGER, aal2TrunkConfigVci INTEGER, aal2TrunkConfigServiceType INTEGER, aal2TrunkConfigPeakCellRateIgr Integer32, aal2TrunkConfigSusCellRateIgr Integer32, aal2TrunkConfigMaxBurstSizeIgr Integer32, aal2TrunkConfigPeakCellRateEgr Integer32, aal2TrunkConfigSusCellRateEgr Integer32, aal2TrunkConfigMaxBurstSizeEgr Integer32, aal2TrunkConfigFlow INTEGER, aal2TrunkConfigRowStatus RowStatus, aal2TrunkConfigConnectionStatus INTEGER, aal2TrunkConfigViB INTEGER, aal2TrunkConfigCnfrmTypeB2A INTEGER, aal2TrunkConfigVUNIB INTEGER, aal2TrunkAvailBwIgr INTEGER, aal2TrunkAvailBwEgr INTEGER, aal2TrunkGR303 INTEGER, aal2TrunkConfigOamStatus INTEGER, aal2TrunkConnFailureCauseB AtmConnFailureCause, aal2TrunkCuTimer INTEGER } aal2TrunkConfigIf OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Id of the Atm Side of the Aal2 Trunk." ::= { aal2TrunkConfigEntry 1 } aal2TrunkConfigVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095." ::= { aal2TrunkConfigEntry 2 } aal2TrunkConfigVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { aal2TrunkConfigEntry 3 } aal2TrunkConfigServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4), ubr(5), vbr-nrt2(6), vbr-nrt1(7), vbr-rt2(8), vbr-rt1(9), vbr-express(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service/Queue types supported for Aal2 Trunk connections.When using Vbr/Ubr type service type oversubscription will have to be taken into account for which nature of traffic going over the Trunk should be known before hand " DEFVAL { cbr-1 } ::= { aal2TrunkConfigEntry 4 } aal2TrunkConfigPeakCellRateIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - atm side inp, in cell per second" DEFVAL { 1 } ::= { aal2TrunkConfigEntry 5 } aal2TrunkConfigSusCellRateIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - atm side inp, in cell per second" DEFVAL { 1 } ::= { aal2TrunkConfigEntry 6 } aal2TrunkConfigMaxBurstSizeIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - atm side inp, in cells" DEFVAL { 1 } ::= { aal2TrunkConfigEntry 7 } aal2TrunkConfigPeakCellRateEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak rate - atm side output, in cell per second." DEFVAL { 1 } ::= { aal2TrunkConfigEntry 8 } aal2TrunkConfigSusCellRateEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "sustained rate - atm side output,in cell per second." DEFVAL { 1 } ::= { aal2TrunkConfigEntry 9 } aal2TrunkConfigMaxBurstSizeEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "maximum burst size - atm side output, in cells." DEFVAL { 1 } ::= { aal2TrunkConfigEntry 10 } aal2TrunkConfigFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow type" DEFVAL { duplex } ::= { aal2TrunkConfigEntry 11 } aal2TrunkConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { aal2TrunkConfigEntry 12 } aal2TrunkConfigConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated . InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { aal2TrunkConfigEntry 13 } aal2TrunkConfigViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { aal2TrunkConfigEntry 14 } aal2TrunkConfigCnfrmTypeB2A OBJECT-TYPE SYNTAX INTEGER { best-effort(1), one-bucket-notag-0plus1(2), two-bucket-notag-0plus1-0plus1(3), two-bucket-notag-0plus1-0(4), two-bucket-tag-0plus1-0(5), best-effort-tag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The following is the description of this field This will be used in conjunction with the service type field to get the correct traffic behaviour. In the conformances the the 0 or 0plus1 refers to the clp bit in the cells. If 0plus1 is the bucket reference then the clp bit is ignored. If 0 is specified for the bucket then check only clp=0 cells. 1: Best Effort will try to send all cellsin a best effort way. This will follow the Aqueman Algorithm 2: one-bucket-notag-0plus1 will use 1 bucket i.e is the PCR(0+1) bucket and drop all cells in excess. 3: two-bucket-notag-0plus1-0plus1 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0+1). All cells conforming to both buckets will be passed through. The rest will be dropped. 4: two-bucket-notag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which conform to both buckets are passed through. The rest are dropped. 5: two-bucket-tag-0plus1-0 uses 2 buckets. The 2 buckets are pcr(0+1) and scr(0) or pcr(0). Cells which do not conform to the first bucket are dropped. Cells which do not conform to the 2nd bucket are tagged. 6: best-effort-tag. Tag all cells and then do a best effort. " DEFVAL { best-effort } ::= { aal2TrunkConfigEntry 15 } aal2TrunkConfigVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { aal2TrunkConfigEntry 16 } aal2TrunkAvailBwIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec." DEFVAL { 0 } ::= { aal2TrunkConfigEntry 17 } aal2TrunkAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec." DEFVAL { 0 } ::= { aal2TrunkConfigEntry 18 } aal2TrunkGR303 OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag is used to check if a GR303 Feature is enabled for the trunk." DEFVAL { disabled } ::= { aal2TrunkConfigEntry 19 } aal2TrunkConfigOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: A side is both an end point and a segment point. " DEFVAL { unsupp } ::= { aal2TrunkConfigEntry 20 } aal2TrunkConnFailureCauseB OBJECT-TYPE SYNTAX AtmConnFailureCause MAX-ACCESS read-only STATUS current DESCRIPTION "connection status reason code" ::= { aal2TrunkConfigEntry 21 } aal2TrunkCuTimer OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out." DEFVAL { 4 } ::= { aal2TrunkConfigEntry 22 } -- -- gr303Aal2PvcVccTable -- gr303Aal2PvcVccTable OBJECT-TYPE SYNTAX SEQUENCE OF Gr303Aal2PvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Gr303 to AAL2 Cid monitor VCCs" ::= { connectionConfig 37 } gr303Aal2PvcVccEntry OBJECT-TYPE SYNTAX Gr303Aal2PvcVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of circuit emulation to atm connections." INDEX { gr303Aal2PvcVccGr303IgId, gr303Aal2PvcVccGr303CallRef, gr303Aal2PvcVccIfB, gr303Aal2PvcVccVpiB, gr303Aal2PvcVccVciB, gr303Aal2PvcVccAal2Cid} ::= { gr303Aal2PvcVccTable 1 } Gr303Aal2PvcVccEntry ::= SEQUENCE { gr303Aal2PvcVccGr303IgId INTEGER, gr303Aal2PvcVccGr303CallRef INTEGER, gr303Aal2PvcVccIfB IntfIndex, gr303Aal2PvcVccVpiB INTEGER, gr303Aal2PvcVccVciB INTEGER, gr303Aal2PvcVccAal2Cid INTEGER, gr303Aal2PvcVccRowStatus RowStatus, gr303Aal2PvcVccVoiceEncodingProfile INTEGER, gr303Aal2PvcVccVoiceCompression INTEGER, gr303Aal2PvcVccSilenceDetection INTEGER, gr303Aal2PvcVccEchoCancellation INTEGER, gr303Aal2PvcVccCngToneDetection INTEGER, gr303Aal2PvcVccCodingTranslation INTEGER, gr303Aal2PvcVccConnectionStatus INTEGER, gr303Aal2PvcVccAltLineType INTEGER } gr303Aal2PvcVccGr303IgId OBJECT-TYPE SYNTAX INTEGER (0..84) MAX-ACCESS not-accessible STATUS current DESCRIPTION "GR303 interface group id on the GR303 side of the connection" ::= { gr303Aal2PvcVccEntry 1 } gr303Aal2PvcVccGr303CallRef OBJECT-TYPE SYNTAX INTEGER (1..2048) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The call reference value to be used in the signaling packets on the GR303 interface for the connection on the AAL2CID corresponding to this connection" ::= { gr303Aal2PvcVccEntry 2 } gr303Aal2PvcVccIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { gr303Aal2PvcVccEntry 3 } gr303Aal2PvcVccVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 4095." ::= { gr303Aal2PvcVccEntry 4 } gr303Aal2PvcVccVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a circuit emulation-atm PVC VCC connection. Valid range is a number between 0 and 65535." ::= { gr303Aal2PvcVccEntry 5 } gr303Aal2PvcVccAal2Cid OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aal2 Cid Used to pack ce chan in an Atm Trunk. This value will be unique per Atm Trunk. This field will be applicable when Aal type is chosen to be Standard Aal2." DEFVAL { 0 } ::= { gr303Aal2PvcVccEntry 6 } gr303Aal2PvcVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { gr303Aal2PvcVccEntry 7 } gr303Aal2PvcVccVoiceEncodingProfile OBJECT-TYPE SYNTAX INTEGER { itut-profile-1(1), itut-profile-3(3), af-profile-6(6), itut-profile-7(7), af-profile-7(8), af-profile-8(9), af-profile-9(10), af-profile-10(11), af-profile-12(12), custom(256), default (257) } MAX-ACCESS read-write STATUS current DESCRIPTION "Profile for use by voice/voiceband data. Profile-3 and Profile-7 are ITU-T predefined profiles which specify the voice compression and silence removal algorithms. If custom profile is chosen all DSP specific parameters have to be specified by the user. If default profile is chosen all parameters on the AAL2 trunk, containing this CID, will be used." DEFVAL { itut-profile-1 } ::= { gr303Aal2PvcVccEntry 8 } gr303Aal2PvcVccVoiceCompression OBJECT-TYPE SYNTAX INTEGER { none(1), g726-16k(2), g726-24k(3), g726-32k(4), g726-40k(5), g729a-8k(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Voice Compression Algorithm" DEFVAL { none } ::= { gr303Aal2PvcVccEntry 9 } gr303Aal2PvcVccSilenceDetection OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence detection off/on" DEFVAL { disabled } ::= { gr303Aal2PvcVccEntry 10 } gr303Aal2PvcVccEchoCancellation OBJECT-TYPE SYNTAX INTEGER { none(1), g165-nearEnd(2), g168(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Echo Cancellation Algorithm" DEFVAL { none } ::= { gr303Aal2PvcVccEntry 11 } gr303Aal2PvcVccCngToneDetection OBJECT-TYPE SYNTAX INTEGER { disabled(1), bypass(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Calling Tone Detection Algorithm" DEFVAL { disabled } ::= { gr303Aal2PvcVccEntry 12 } gr303Aal2PvcVccCodingTranslation OBJECT-TYPE SYNTAX INTEGER { none(1), muLaw2muLaw(2), aLaw2aLaw(3), muLaw2aLaw(4), aLaw2muLaw(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Coding rule translation type." DEFVAL { none } ::= { gr303Aal2PvcVccEntry 13 } gr303Aal2PvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { gr303Aal2PvcVccEntry 14 } gr303Aal2PvcVccAltLineType OBJECT-TYPE SYNTAX INTEGER { alt-LoopReverseBattery(1), alt-groundStart(9), alt-loopStart (13), alt-winkStart (29) } MAX-ACCESS read-write STATUS current DESCRIPTION "Analog Line Termination Line Type on the subscriber side. The ABCD bit codes for diffterent signal types depend on the analog line type. The analog type can be overwritten by an EOC message from the IDT" DEFVAL { alt-loopStart } ::= { gr303Aal2PvcVccEntry 15 } -- -- atmAtmSpvcVpcTable - for SPVP support -- atmAtmSpvcVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmAtmSpvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of SPVC ATM virtual path connections." ::= { connectionConfig 38 } atmAtmSpvcVpcEntry OBJECT-TYPE SYNTAX AtmAtmSpvcVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of ATM SPVC VPC connections." INDEX { spvcAddrIfA, atmAtmSpvcVpcVpiA, atmAtmSpvcVpcRemoteAtmPortAddr } ::= { atmAtmSpvcVpcTable 1 } AtmAtmSpvcVpcEntry ::= SEQUENCE { atmAtmSpvcVpcVpiA INTEGER, atmAtmSpvcVpcRemoteAtmPortAddr OCTET STRING, atmAtmSpvcVpcIfB IntfIndex, atmAtmSpvcVpcVpiB INTEGER, atmAtmSpvcVpcServiceTypeA2B INTEGER, atmAtmSpvcVpcSarTypeA2B INTEGER, atmAtmSpvcVpcPeakCellRateA2B Integer32, atmAtmSpvcVpcSusCellRateA2B Integer32, atmAtmSpvcVpcMaxBurstSizeA2B Integer32, atmAtmSpvcVpcFrwdErrCorrectionA2B INTEGER, atmAtmSpvcVpcServiceTypeB2A INTEGER, atmAtmSpvcVpcSarTypeB2A INTEGER, atmAtmSpvcVpcPeakCellRateB2A Integer32, atmAtmSpvcVpcSusCellRateB2A Integer32, atmAtmSpvcVpcMaxBurstSizeB2A Integer32, atmAtmSpvcVpcFrwdErrCorrectionB2A INTEGER, atmAtmSpvcVpcFlow INTEGER, atmAtmSpvcVpcType INTEGER, atmAtmSpvcVpcConnType INTEGER, atmAtmSpvcVpcLeafReference INTEGER, atmAtmSpvcVpcOperStatus INTEGER, atmAtmSpvcVpcRowStatus RowStatus, atmAtmSpvcVpcRemoteSelectType INTEGER, atmAtmSpvcVpcRemoteVpi INTEGER, atmAtmSpvcVpcRetryInterval INTEGER, atmAtmSpvcVpcRetryLimit INTEGER, atmAtmSpvcVpcRestart INTEGER, atmAtmSpvcVpcRetryFailure Integer32, atmAtmSpvcVpcReleaseCause INTEGER, atmAtmSpvcVpcReleaseDiag OCTET STRING, atmAtmSpvcVpcRelease INTEGER, atmAtmSpvcVpcStatsInCellCountHiA Integer32, atmAtmSpvcVpcStatsInCellCountLoA Integer32, atmAtmSpvcVpcStatsOutCellCountHiA Integer32, atmAtmSpvcVpcStatsOutCellCountLoA Integer32, atmAtmSpvcVpcStatsInCellCountHiB Integer32, atmAtmSpvcVpcStatsInCellCountLoB Integer32, atmAtmSpvcVpcStatsOutCellCountHiB Integer32, atmAtmSpvcVpcStatsOutCellCountLoB Integer32, atmAtmSpvcVpcStatsTimer Integer32, atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B INTEGER, atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A INTEGER, atmAtmSpvcVpcStatsInOdometerCellCountHiA Integer32, atmAtmSpvcVpcStatsInOdometerCellCountLoA Integer32, atmAtmSpvcVpcStatsOutOdometerCellCountHiA Integer32, atmAtmSpvcVpcStatsOutOdometerCellCountLoA Integer32, atmAtmSpvcVpcStatsInOdometerCellCountHiB Integer32, atmAtmSpvcVpcStatsInOdometerCellCountLoB Integer32, atmAtmSpvcVpcStatsOutOdometerCellCountHiB Integer32, atmAtmSpvcVpcStatsOutOdometerCellCountLoB Integer32, atmAtmSpvcVpcStatsOdometerTimer Integer32, atmAtmSpvcVpcStatsOdometerReset INTEGER, atmAtmSpvcVpcViA INTEGER, atmAtmSpvcVpcViB INTEGER, atmAtmSpvcVpcStatsCellsDroppedA Integer32, atmAtmSpvcVpcStatsCellsTaggedA Integer32, atmAtmSpvcVpcStatsCellsDroppedB Integer32, atmAtmSpvcVpcStatsCellsTaggedB Integer32 ,atmAtmSpvcVpcVUNIA INTEGER, atmAtmSpvcVpcVUNIB INTEGER, atmAtmSpvcVpcTrafficShapingA2B INTEGER, atmAtmSpvcVpcTrafficShapingB2A INTEGER, atmAtmSpvcVpcPriority INTEGER } atmAtmSpvcVpcVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095." ::= { atmAtmSpvcVpcEntry 1 } atmAtmSpvcVpcRemoteAtmPortAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote ATM port NSAP address, not meaningful if passive type of connection." ::= { atmAtmSpvcVpcEntry 2 } atmAtmSpvcVpcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B of an ATM SPVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the path number." ::= { atmAtmSpvcVpcEntry 3 } atmAtmSpvcVpcVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VPI value for side B of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095." ::= { atmAtmSpvcVpcEntry 4 } atmAtmSpvcVpcServiceTypeA2B OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM port." DEFVAL { ubr } ::= { atmAtmSpvcVpcEntry 5 } atmAtmSpvcVpcSarTypeA2B OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM port." DEFVAL { null } ::= { atmAtmSpvcVpcEntry 6 } atmAtmSpvcVpcPeakCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 7 } atmAtmSpvcVpcSusCellRateA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 8 } atmAtmSpvcVpcMaxBurstSizeA2B OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM port, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 9 } atmAtmSpvcVpcFrwdErrCorrectionA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM port side." DEFVAL { none } ::= { atmAtmSpvcVpcEntry 10 } atmAtmSpvcVpcServiceTypeB2A OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type, ATM trunk side." DEFVAL { ubr } ::= { atmAtmSpvcVpcEntry 11 } atmAtmSpvcVpcSarTypeB2A OBJECT-TYPE SYNTAX INTEGER { aal5(1), aal3-4(2), aal2(3), aal1(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "SAR type used in ATM adaption, ATM trunk side." DEFVAL { null } ::= { atmAtmSpvcVpcEntry 12 } atmAtmSpvcVpcPeakCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 13 } atmAtmSpvcVpcSusCellRateB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate - side B, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 14 } atmAtmSpvcVpcMaxBurstSizeB2A OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size - side A, ATM trunk, in cells per second." DEFVAL { 1 } ::= { atmAtmSpvcVpcEntry 15 } atmAtmSpvcVpcFrwdErrCorrectionB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forward error correction scheme, ATM trunk side." DEFVAL { none } ::= { atmAtmSpvcVpcEntry 16 } atmAtmSpvcVpcFlow OBJECT-TYPE SYNTAX INTEGER { duplex(1), simplexA2B(2), pointToMultipointA2B(3), simplexB2A(4), pointToMultipointB2A(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of flow, pointToMultipointA2B is for future support." DEFVAL { duplex } ::= { atmAtmSpvcVpcEntry 17 } atmAtmSpvcVpcType OBJECT-TYPE SYNTAX INTEGER { nonsecured(1), secured(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of connection." DEFVAL { nonsecured } ::= { atmAtmSpvcVpcEntry 18 } atmAtmSpvcVpcConnType OBJECT-TYPE SYNTAX INTEGER { activeSvc(1), passiveSvc(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls." ::= { atmAtmSpvcVpcEntry 19 } atmAtmSpvcVpcLeafReference OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-to-point SPVC, the value should be 1." ::= { atmAtmSpvcVpcEntry 20 } atmAtmSpvcVpcOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6), waitingForCall(7), waitingForRetryTimer(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not operational, but call attempts are ongoing. connected - connection is currently operational. retriesExhausted - retry limit has been reached and call attempts have ceased. noAddressSupplied - no remote address has been configured, so no call attempts are initiated. lowerLayerDown - SPVC handler is not operational." ::= { atmAtmSpvcVpcEntry 21 } atmAtmSpvcVpcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this object has the value 'active' and is set to another value, any setup or connection in-progress is released." ::= { atmAtmSpvcVpcEntry 22 } atmAtmSpvcVpcRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote VPI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmAtmSpvcVpcRemoteVpi and must be supplied and are used at the destination." ::= { atmAtmSpvcVpcEntry 23 } atmAtmSpvcVpcRemoteVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value to be used at the destination of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. If atmAtmSpvcVpcRemoteSelectType is configured as 'any', then this value is not relevant." ::= { atmAtmSpvcVpcEntry 24 } atmAtmSpvcVpcRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries will be attempted immediately." ::= { atmAtmSpvcVpcEntry 25 } atmAtmSpvcVpcRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A maximum limit on how many retries should be attempted. A value of 0 indicates no limit." ::= { atmAtmSpvcVpcEntry 26 } atmAtmSpvcVpcRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmAtmSpvcVpcEntry 27 } atmAtmSpvcVpcRetryFailure OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully established or the SVC is restarted." ::= { atmAtmSpvcVpcEntry 28 } atmAtmSpvcVpcReleaseCause OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "CAUSE field value of the last RELEASE message received for this SVC." ::= { atmAtmSpvcVpcEntry 29 } atmAtmSpvcVpcReleaseDiag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "DIAGNOSTICS field value of the last RELEASE message received for this SVC." ::= { atmAtmSpvcVpcEntry 30 } atmAtmSpvcVpcRelease OBJECT-TYPE SYNTAX INTEGER { release(1), noop(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Release the connnection established on the endpoint and if the endpoint is Active, do not retry." ::= { atmAtmSpvcVpcEntry 31 } atmAtmSpvcVpcStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (High order portion)" ::= { atmAtmSpvcVpcEntry 32 } atmAtmSpvcVpcStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (Low order portion) " ::= { atmAtmSpvcVpcEntry 33 } atmAtmSpvcVpcStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(High order portion)" ::= { atmAtmSpvcVpcEntry 34 } atmAtmSpvcVpcStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(Low order portion)" ::= { atmAtmSpvcVpcEntry 35 } atmAtmSpvcVpcStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { atmAtmSpvcVpcEntry 36 } atmAtmSpvcVpcStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion) " ::= { atmAtmSpvcVpcEntry 37 } atmAtmSpvcVpcStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(High order portion)" ::= { atmAtmSpvcVpcEntry 38 } atmAtmSpvcVpcStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(Low order portion)" ::= { atmAtmSpvcVpcEntry 39 } atmAtmSpvcVpcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmAtmSpvcVpcEntry 40 } atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVpcEntry 41 } atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVpcEntry 42 } atmAtmSpvcVpcStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVpcEntry 43 } atmAtmSpvcVpcStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 44 } atmAtmSpvcVpcStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 45 } atmAtmSpvcVpcStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 46 } atmAtmSpvcVpcStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVpcEntry 47 } atmAtmSpvcVpcStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 48 } atmAtmSpvcVpcStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 49 } atmAtmSpvcVpcStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmAtmSpvcVpcEntry 50 } atmAtmSpvcVpcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmAtmSpvcVpcEntry 51 } atmAtmSpvcVpcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmAtmSpvcVpcEntry 52 } atmAtmSpvcVpcViA OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmAtmSpvcVpcEntry 53 } atmAtmSpvcVpcViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "VI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmAtmSpvcVpcEntry 54 } atmAtmSpvcVpcStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmAtmSpvcVpcEntry 55 } atmAtmSpvcVpcStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmAtmSpvcVpcEntry 56 } atmAtmSpvcVpcStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmAtmSpvcVpcEntry 57 } atmAtmSpvcVpcStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmAtmSpvcVpcEntry 58 } atmAtmSpvcVpcVUNIA OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the B2A connection ." DEFVAL { 0 } ::= { atmAtmSpvcVpcEntry 59 } atmAtmSpvcVpcVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI to associate the Egress part of the A2B connection ." DEFVAL { 0 } ::= { atmAtmSpvcVpcEntry 60 } atmAtmSpvcVpcTrafficShapingA2B OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction." DEFVAL { disabled } ::= { atmAtmSpvcVpcEntry 61 } atmAtmSpvcVpcTrafficShapingB2A OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the B2A direction." DEFVAL { disabled } ::= { atmAtmSpvcVpcEntry 62 } atmAtmSpvcVpcPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of SPVC - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { atmAtmSpvcVpcEntry 63 } -- intfAtmPvcConnDisplayTable intfAtmPvcConnDisplayTable OBJECT-TYPE SYNTAX SEQUENCE OF IntfAtmConnDisplayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Pvc Connections on an Interface." ::= { connectionConfig 39 } intfAtmPvcConnDisplayEntry OBJECT-TYPE SYNTAX IntfAtmConnDisplayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gives list of pvc going towards the backplane on a particluar interface" INDEX { intfAtmPvcConnDisplaySlot,intfAtmPvcConnDisplayPort, intfAtmPvcConnDisplayChannel,intfAtmPvcConnDisplayVpi, intfAtmPvcConnDisplayVci} ::= { intfAtmPvcConnDisplayTable 1 } IntfAtmConnDisplayEntry ::= SEQUENCE { intfAtmPvcConnDisplaySlot Integer32, intfAtmPvcConnDisplayPort Integer32, intfAtmPvcConnDisplayChannel Integer32, intfAtmPvcConnDisplayVpi INTEGER, intfAtmPvcConnDisplayVci INTEGER, intfAtmPvcConnDisplayFlowType INTEGER } intfAtmPvcConnDisplaySlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot of the particular interface" ::= { intfAtmPvcConnDisplayEntry 1 } intfAtmPvcConnDisplayPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port of the particular interface" ::= { intfAtmPvcConnDisplayEntry 2 } intfAtmPvcConnDisplayChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel of the particular interface" ::= { intfAtmPvcConnDisplayEntry 3 } intfAtmPvcConnDisplayVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for connection on Intf Valid range is a number between 0 and 4095." ::= { intfAtmPvcConnDisplayEntry 4 } intfAtmPvcConnDisplayVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for connection on Intf Valid range is a number between 0 and 65535." ::= { intfAtmPvcConnDisplayEntry 5 } intfAtmPvcConnDisplayFlowType OBJECT-TYPE SYNTAX INTEGER { cnctnValid(1), cnctnNull(2), cnctnPtmpValid(3), cnctnPtmpNull(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Flow type:Indicates Flow Towards the Back Plane cnctnValid: Traffic flow towards BP is enabled. cnctnNull: Traffic flow towards BP is disabled. cnctnPtmpValid: Traffic flow towards BP is enabled and it is point to multipoint connection. cnctnPtmpNull: Traffic flow towards BP is disabled and it is point to multipoint connection." ::= { intfAtmPvcConnDisplayEntry 6} -- User Service Profile Group userServiceConfig -- System Statistics Group sysStatistics -- Equipment Statistics Group equipStatistics ds3PortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a DS3 port" ::= { equipStatistics 1 } ds3PortStatsEntry OBJECT-TYPE SYNTAX Ds3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the DS3 port statistics table" INDEX { ds3PortStatsId } ::= { ds3PortStatsTable 1 } Ds3PortStatsEntry ::= SEQUENCE { ds3PortStatsId Integer32, ds3PortStatsTimer Integer32, ds3PortStatsCurrentSEFSs Integer32, ds3PortStatsCurrentLCVs Integer32, ds3PortStatsCurrentLESs Integer32 } ds3PortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { ds3PortStatsEntry 1 } ds3PortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { ds3PortStatsEntry 2 } ds3PortStatsCurrentSEFSs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "severely errored framing seconds" ::= { ds3PortStatsEntry 3 } ds3PortStatsCurrentLCVs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line coding violations encountered" ::= { ds3PortStatsEntry 4 } ds3PortStatsCurrentLESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line errored seconds" ::= { ds3PortStatsEntry 5 } ds1PortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds1PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a DS1 port" ::= { equipStatistics 2 } ds1PortStatsEntry OBJECT-TYPE SYNTAX Ds1PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the DS1 port statistics table" INDEX { ds1PortStatsId } ::= { ds1PortStatsTable 1 } Ds1PortStatsEntry ::= SEQUENCE { ds1PortStatsId Integer32, ds1PortStatsTimer Integer32, ds1PortStatsCurrentESs Integer32, ds1PortStatsCurrentSESs Integer32, ds1PortStatsCurrentLCVs Integer32 } ds1PortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { ds1PortStatsEntry 1 } ds1PortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { ds1PortStatsEntry 2 } ds1PortStatsCurrentESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a DS1 interface." ::= { ds1PortStatsEntry 3 } ds1PortStatsCurrentSESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a DS1 interface." ::= { ds1PortStatsEntry 4 } ds1PortStatsCurrentLCVs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Code Violations (LCVs) en- countered by a DS1 interface." ::= { ds1PortStatsEntry 5 } oc3PortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Oc3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a OC3 port" ::= { equipStatistics 3 } oc3PortStatsEntry OBJECT-TYPE SYNTAX Oc3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the OC3 port statistics table" INDEX { oc3PortStatsId } ::= { oc3PortStatsTable 1 } Oc3PortStatsEntry ::= SEQUENCE { oc3PortStatsId Integer32, oc3PortStatsSectionBip8Errs Integer32, oc3PortStatsLineBip8Errs Integer32, oc3PortStatsPathBip8Errs Integer32, oc3PortStatsLineFebeCount Integer32, oc3PortStatsPathFebeCount Integer32, oc3PortStatsTimer Integer32 } oc3PortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { oc3PortStatsEntry 1 } oc3PortStatsSectionBip8Errs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "section sublayer BIP8 errors. " ::= { oc3PortStatsEntry 2 } oc3PortStatsLineBip8Errs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " line sublayer BIP8 errors. " ::= { oc3PortStatsEntry 3 } oc3PortStatsPathBip8Errs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " path sublayer BIP8 errors. " ::= { oc3PortStatsEntry 4 } oc3PortStatsLineFebeCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " line sublayer FEBE count. " ::= { oc3PortStatsEntry 5 } oc3PortStatsPathFebeCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " path sublayer FEBE count. " ::= { oc3PortStatsEntry 6 } oc3PortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { oc3PortStatsEntry 7 } msPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MsPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a MS port" ::= { equipStatistics 4 } msPortStatsEntry OBJECT-TYPE SYNTAX MsPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the MS port statistics table" INDEX { msPortStatsId } ::= { msPortStatsTable 1 } MsPortStatsEntry ::= SEQUENCE { msPortStatsId Integer32, msPortStatsFrameErrors Integer32, msPortStatsOutOfFrameSeconds Integer32, msPortStatsTimer Integer32 } msPortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { msPortStatsEntry 1 } msPortStatsFrameErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "P-bit severely errored seconds" ::= { msPortStatsEntry 4 } msPortStatsOutOfFrameSeconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "severely errored framing seconds" ::= { msPortStatsEntry 5 } msPortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { msPortStatsEntry 6 } e3PortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF E3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a E3 port" ::= { equipStatistics 5 } e3PortStatsEntry OBJECT-TYPE SYNTAX E3PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the E3 port statistics table" INDEX { e3PortStatsId } ::= { e3PortStatsTable 1 } E3PortStatsEntry ::= SEQUENCE { e3PortStatsId Integer32, e3PortStatsTimer Integer32, e3PortStatsCurrentSEFSs Integer32, e3PortStatsCurrentLCVs Integer32, e3PortStatsCurrentLESs Integer32 } e3PortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { e3PortStatsEntry 1 } e3PortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { e3PortStatsEntry 2 } e3PortStatsCurrentSEFSs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "severely errored framing seconds" ::= { e3PortStatsEntry 3 } e3PortStatsCurrentLCVs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line coding violations encountered" ::= { e3PortStatsEntry 4 } e3PortStatsCurrentLESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line errored seconds" ::= { e3PortStatsEntry 5 } e1PortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF E1PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics for a E1 port" ::= { equipStatistics 6 } e1PortStatsEntry OBJECT-TYPE SYNTAX E1PortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the E1 port statistics table" INDEX { e1PortStatsId } ::= { e1PortStatsTable 1 } E1PortStatsEntry ::= SEQUENCE { e1PortStatsId Integer32, e1PortStatsTimer Integer32, e1PortStatsCurrentESs Integer32, e1PortStatsCurrentSESs Integer32, e1PortStatsCurrentLCVs Integer32 } e1PortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID - Slot/Port (SSPP)" ::= { e1PortStatsEntry 1 } e1PortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." DEFVAL { 0 } ::= { e1PortStatsEntry 2 } e1PortStatsCurrentESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds, encountered by a E1 interface." ::= { e1PortStatsEntry 3 } e1PortStatsCurrentSESs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds encoun- tered by a E1 interface." ::= { e1PortStatsEntry 4 } e1PortStatsCurrentLCVs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Line Code Violations (LCVs) en- countered by a E1 interface." ::= { e1PortStatsEntry 5 } ethernetPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EthernetPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statisics for a collection of ethernet-like interfaces attached to a particular system." ::= { equipStatistics 7 } ethernetPortStatsEntry OBJECT-TYPE SYNTAX EthernetPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a particular interface to an ethernet-like medium." INDEX { ethernetPortStatsId } ::= { ethernetPortStatsTable 1 } EthernetPortStatsEntry ::= SEQUENCE { ethernetPortStatsId Integer32, ethernetPortStatsTimer Integer32, ethernetPortStatsAlignmentErrors Integer32, ethernetPortStatsFCSErrors Integer32, ethernetPortStatsSingleCollisionFrames Integer32, ethernetPortStatsMultipleCollisionFrames Integer32, ethernetPortStatsSQETestErrors Integer32, ethernetPortStatsDeferredTransmissions Integer32, ethernetPortStatsLateCollisions Integer32, ethernetPortStatsExcessiveCollisions Integer32, ethernetPortStatsInternalMacTransmitErrors Integer32, ethernetPortStatsCarrierSenseErrors Integer32, ethernetPortStatsFrameTooLongs Integer32, ethernetPortStatsInternalMacReceiveErrors Integer32 } ethernetPortStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ethernetPortId." ::= { ethernetPortStatsEntry 1 } ethernetPortStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." DEFVAL { 0 } ::= { ethernetPortStatsEntry 2 } ethernetPortStatsAlignmentErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 3 } ethernetPortStatsFCSErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 4 } ethernetPortStatsSingleCollisionFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsMulitipleCollisionFrames object." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 5 } ethernetPortStatsMultipleCollisionFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted frames on a particular interface for which trnasmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, IfOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the ethernetPortStatsSingleCollisionFrames object." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 6 } ethernetPortStatsSQETestErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document." REFERENCE "ANSI/IEEE Std 802.3-1985 Carrier Sense Multiple Access with Collision Detection Access Method and Physical Layer Specifications" DEFVAL { 0 } ::= { ethernetPortStatsEntry 7 } ethernetPortStatsDeferredTransmissions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which the first transmission attempt on a particluar interface is delayed because the medium is busy. the count represented by an instance of this object does not include frames involved in collisions." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 8 } ethernetPortStatsLateCollisions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 9 } ethernetPortStatsExcessiveCollisions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which transmission on a particular interface fails due to excessive collisions." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 10 } ethernetPortStatsInternalMacTransmitErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsLateCollisions object, the ethernetPortStatsExcessiveCollisions object, or the ethernetPortStatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 11 } ethernetPortStatsCarrierSenseErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 12 } ethernetPortStatsFrameTooLongs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 13 } ethernetPortStatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the ethernetPortStatsFrameTooLongs object, the ethernetPortStatsAlignmentErrors object, or the ethernetPortStatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." REFERENCE "IEEE 802.3 Layer Management" DEFVAL { 0 } ::= { ethernetPortStatsEntry 14 } -- Interface Statistics Group intfStatistics atmIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an atmUni interface" ::= { intfStatistics 1 } atmIfStatsEntry OBJECT-TYPE SYNTAX AtmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the atmUni statistics table" INDEX { atmIfStatsId } ::= { atmIfStatsTable 1} AtmIfStatsEntry ::= SEQUENCE { atmIfStatsId IntfIndex, atmIfStatsValidCellsInHi Integer32, atmIfStatsValidCellsInLo Integer32, atmIfStatsErroredCellsIn Integer32, atmIfStatsMismatchedCellsIn Integer32, atmIfStatsNullCellsOutHi Integer32, atmIfStatsNullCellsOutLo Integer32, atmIfStatsValidCellsOutHi Integer32, atmIfStatsValidCellsOutLo Integer32, atmIfStatsTimer Integer32 } atmIfStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the atmUni statistics table" ::= { atmIfStatsEntry 1 } atmIfStatsValidCellsInHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of valid cells received on the channel - High Word" ::= { atmIfStatsEntry 2 } atmIfStatsValidCellsInLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of valid cells received on the channel - low Word" ::= { atmIfStatsEntry 3 } atmIfStatsErroredCellsIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored cells received on the channel" ::= { atmIfStatsEntry 4 } atmIfStatsMismatchedCellsIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Vpi/Vci translation errors on input cells." ::= { atmIfStatsEntry 5 } atmIfStatsNullCellsOutHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of null cells sent out on the channel - High Word" ::= { atmIfStatsEntry 6 } atmIfStatsNullCellsOutLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of null cells sent out on the channel - Low Word" ::= { atmIfStatsEntry 7 } atmIfStatsValidCellsOutHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of valid cells sent out on the channel - High Word" ::= { atmIfStatsEntry 8 } atmIfStatsValidCellsOutLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of valid cells sent out on the channel - Low Word" ::= { atmIfStatsEntry 9 } atmIfStatsTimer OBJECT-TYPE SYNTAX Integer32 (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { atmIfStatsEntry 10 } frUniStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrUniStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a Frame Relay UNI Interface " ::= { intfStatistics 2 } frUniStatsEntry OBJECT-TYPE SYNTAX FrUniStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the Frame Realy UNI statistics table" INDEX { frUniStatsId } ::= { frUniStatsTable 1} FrUniStatsEntry ::= SEQUENCE { frUniStatsId IntfIndex, frUniStatsTimer INTEGER, frUniStatsCellsMismatched Integer32, frUniStatsErroredFrames Integer32, frUniStatsCellsEncodedHi Integer32, frUniStatsCellsEncodedLo Integer32, frUniStatsFramesEncodedHi Integer32, frUniStatsFramesEncodedLo Integer32, frUniStatsCellsDecodedHi Integer32, frUniStatsCellsDecodedLo Integer32, frUniStatsFramesDecodedHi Integer32, frUniStatsFramesDecodedLo Integer32, frUniStatsAAL5Errors Integer32 } frUniStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the frame relay UNI statistics table" ::= { frUniStatsEntry 1 } frUniStatsTimer OBJECT-TYPE SYNTAX INTEGER (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { frUniStatsEntry 9 } frUniStatsCellsMismatched OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells not matched to provisioned DLCIs." ::= { frUniStatsEntry 10 } frUniStatsErroredFrames OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of errored frames." ::= { frUniStatsEntry 11 } frUniStatsCellsEncodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells encoded - (High order portion)." ::= { frUniStatsEntry 12 } frUniStatsCellsEncodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells encoded - (Low order portion)." ::= { frUniStatsEntry 13 } frUniStatsFramesEncodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames encoded - (High order portion)." ::= { frUniStatsEntry 14 } frUniStatsFramesEncodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames encoded - (Low order portion)." ::= { frUniStatsEntry 15 } frUniStatsCellsDecodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells decoded - (High order portion)." ::= { frUniStatsEntry 16 } frUniStatsCellsDecodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells decoded - (Low order portion)." ::= { frUniStatsEntry 17 } frUniStatsFramesDecodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames decoded - (High order portion)." ::= { frUniStatsEntry 18 } frUniStatsFramesDecodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames decoded - (Low order portion)." ::= { frUniStatsEntry 19 } frUniStatsAAL5Errors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " number of aal5 PDUs with invalid byte count or CRC-32." ::= { frUniStatsEntry 20 } cirEmIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an cirEm interface" ::= { intfStatistics 3 } cirEmIfStatsEntry OBJECT-TYPE SYNTAX CirEmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the cirEm statistics table" INDEX { cirEmIfStatsId } ::= { cirEmIfStatsTable 1} CirEmIfStatsEntry ::= SEQUENCE { cirEmIfStatsId IntfIndex, cirEmIfStatsCellsEncodedHi Integer32, cirEmIfStatsCellsEncodedLo Integer32, cirEmIfStatsCellsDecodedHi Integer32, cirEmIfStatsCellsDecodedLo Integer32, cirEmIfStatsTimer Integer32 } cirEmIfStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the cirEm statistics table" ::= { cirEmIfStatsEntry 1 } cirEmIfStatsCellsEncodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port" ::= { cirEmIfStatsEntry 2 } cirEmIfStatsCellsEncodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port" ::= { cirEmIfStatsEntry 3 } cirEmIfStatsCellsDecodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media" ::= { cirEmIfStatsEntry 4 } cirEmIfStatsCellsDecodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media" ::= { cirEmIfStatsEntry 5 } cirEmIfStatsTimer OBJECT-TYPE SYNTAX Integer32 (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { cirEmIfStatsEntry 6 } vbrIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an vbr interface" ::= { intfStatistics 4 } vbrIfStatsEntry OBJECT-TYPE SYNTAX VbrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the vbr statistics table" INDEX { vbrIfStatsId } ::= { vbrIfStatsTable 1} VbrIfStatsEntry ::= SEQUENCE { vbrIfStatsId IntfIndex, vbrIfStatsCellsEncodedHi Integer32, vbrIfStatsCellsEncodedLo Integer32, vbrIfStatsCellsDecodedHi Integer32, vbrIfStatsCellsDecodedLo Integer32, vbrIfStatsTimer Integer32 } vbrIfStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the vbr statistics table" ::= { vbrIfStatsEntry 1 } vbrIfStatsCellsEncodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port" ::= { vbrIfStatsEntry 2 } vbrIfStatsCellsEncodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port" ::= { vbrIfStatsEntry 3 } vbrIfStatsCellsDecodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media" ::= { vbrIfStatsEntry 4 } vbrIfStatsCellsDecodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media" ::= { vbrIfStatsEntry 5 } vbrIfStatsTimer OBJECT-TYPE SYNTAX Integer32 (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { vbrIfStatsEntry 6 } frLmiStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrLmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a Frame Relay LMI Interface " ::= { intfStatistics 5 } frLmiStatsEntry OBJECT-TYPE SYNTAX FrLmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the Frame Realy LMI statistics table" INDEX { frLmiStatsId } ::= { frLmiStatsTable 1 } FrLmiStatsEntry ::= SEQUENCE { frLmiStatsId IntfIndex, frLmiStatsEnqRx Integer32, frLmiStatsEnqTx Integer32, frLmiStatsStatusRx Integer32, frLmiStatsStatusTx Integer32, frLmiStatsAsyncRx Integer32, frLmiStatsAsyncTx Integer32, frLmiStatsPktDisc Integer32, frLmiStatsT391Exp INTEGER, frLmiStatsT392Exp INTEGER, frLmiStatsLinkReset INTEGER, frLmiStatsTimer INTEGER } frLmiStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the frame relay LMI statistics table" ::= { frLmiStatsEntry 1 } frLmiStatsEnqRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of STATUS ENQ messages received" ::= { frLmiStatsEntry 2 } frLmiStatsEnqTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of STATUS ENQ messages transmitted" ::= { frLmiStatsEntry 3 } frLmiStatsStatusRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of STATUS messages received" ::= { frLmiStatsEntry 4 } frLmiStatsStatusTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of STATUS messages transmitted" ::= { frLmiStatsEntry 5 } frLmiStatsAsyncRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of ASYNC STATUS messages received" ::= { frLmiStatsEntry 6 } frLmiStatsAsyncTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of ASYNC STATUS messages transmitted" ::= { frLmiStatsEntry 7 } frLmiStatsPktDisc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lmi messages discarded due to invalid length, receive sequence numbers, or other error." ::= { frLmiStatsEntry 8 } frLmiStatsT391Exp OBJECT-TYPE SYNTAX INTEGER (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Link integrity verification polling timer expiry" ::= { frLmiStatsEntry 9 } frLmiStatsT392Exp OBJECT-TYPE SYNTAX INTEGER (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Polling verification timer expiry" ::= { frLmiStatsEntry 10 } frLmiStatsLinkReset OBJECT-TYPE SYNTAX INTEGER (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times interface operational status was in service after system startup." ::= { frLmiStatsEntry 11 } frLmiStatsTimer OBJECT-TYPE SYNTAX INTEGER (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time since last reset for statistics - in seconds" ::= { frLmiStatsEntry 12 } bridgeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a bridge interface." ::= { intfStatistics 6 } bridgeStatsEntry OBJECT-TYPE SYNTAX BridgeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the bridge interface statistics table" INDEX { bridgeStatsId } ::= { bridgeStatsTable 1 } BridgeStatsEntry ::= SEQUENCE { bridgeStatsId Integer32, bridgeStatsTimer Integer32, bridgeStatsBasePortDelayExceededDiscardsHi Integer32, bridgeStatsBasePortDelayExceededDiscardsLo Integer32, bridgeStatsBasePortMtuExceededDiscardsHi Integer32, bridgeStatsBasePortMtuExceededDiscardsLo Integer32, bridgeStatsTpPortInFramesHi Integer32, bridgeStatsTpPortInFramesLo Integer32, bridgeStatsTpPortOutFramesHi Integer32, bridgeStatsTpPortOutFramesLo Integer32, bridgeStatsTpPortInDiscardsHi Integer32, bridgeStatsTpPortInDiscardsLo Integer32 } bridgeStatsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the bridge" ::= { bridgeStatsEntry 1 } bridgeStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { bridgeStatsEntry 2 } bridgeStatsBasePortDelayExceededDiscardsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. High-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 8 } bridgeStatsBasePortDelayExceededDiscardsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. Low-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 9 } bridgeStatsBasePortMtuExceededDiscardsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. High-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 10 } bridgeStatsBasePortMtuExceededDiscardsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. Low-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 11 } bridgeStatsTpPortInFramesHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 12 } bridgeStatsTpPortInFramesLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 13 } bridgeStatsTpPortOutFramesHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. High-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 14 } bridgeStatsTpPortOutFramesLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. Low-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 15 } bridgeStatsTpPortInDiscardsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. High-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 16 } bridgeStatsTpPortInDiscardsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. Low-order 32 bits." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { bridgeStatsEntry 17 } dbCirEmIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF DbCirEmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a dbCirEm interface." ::= { intfStatistics 7 } dbCirEmIfStatsEntry OBJECT-TYPE SYNTAX DbCirEmIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the dbCirEm statistics table." INDEX { dbCirEmIfStatsId } ::= { dbCirEmIfStatsTable 1} DbCirEmIfStatsEntry ::= SEQUENCE { dbCirEmIfStatsId IntfIndex, dbCirEmIfStatsCellsEncodedHi Integer32, dbCirEmIfStatsCellsEncodedLo Integer32, dbCirEmIfStatsCellsDecodedHi Integer32, dbCirEmIfStatsCellsDecodedLo Integer32, dbCirEmIfStatsTimer Integer32 } dbCirEmIfStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the dbCirEm statistics table." ::= { dbCirEmIfStatsEntry 1 } dbCirEmIfStatsCellsEncodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port." ::= { dbCirEmIfStatsEntry 2 } dbCirEmIfStatsCellsEncodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming cells from the outside media to the i/o port." ::= { dbCirEmIfStatsEntry 3 } dbCirEmIfStatsCellsDecodedHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media." ::= { dbCirEmIfStatsEntry 4 } dbCirEmIfStatsCellsDecodedLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outgoing cells from the i/o port to the outside media." ::= { dbCirEmIfStatsEntry 5 } dbCirEmIfStatsTimer OBJECT-TYPE SYNTAX Integer32 (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { dbCirEmIfStatsEntry 6 } atmImaStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmImaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an atmIma interface." ::= { intfStatistics 8 } atmImaStatsEntry OBJECT-TYPE SYNTAX AtmImaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the atmIma statistics table." INDEX { atmImaStatsId } ::= { atmImaStatsTable 1 } AtmImaStatsEntry ::= SEQUENCE { atmImaStatsId IntfIndex, atmImaStatsTimer Integer32, atmImaStatsImaViolations Integer32, atmImaStatsOifAnomalies Integer32, atmImaStatsNeTxNumFailures Integer32, atmImaStatsNeRxNumFailures Integer32, atmImaStatsFeTxNumFailures Integer32, atmImaStatsFeRxNumFailures Integer32, atmImaStatsTxStuffs Integer32, atmImaStatsRxStuffs Integer32 } atmImaStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) to the atmIma statistics table." ::= { atmImaStatsEntry 1 } atmImaStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { atmImaStatsEntry 2 } atmImaStatsImaViolations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition." ::= { atmImaStatsEntry 3 } atmImaStatsOifAnomalies OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OIF anomalies during non-SES-IMA condition at the near-end." ::= { atmImaStatsEntry 4 } atmImaStatsNeTxNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a near-end transmit failure alarm condition has been entered on this link." ::= { atmImaStatsEntry 5 } atmImaStatsNeRxNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA)." ::= { atmImaStatsEntry 6 } atmImaStatsFeTxNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a far-end transmit failure alarm condition has been entered on this link." ::= { atmImaStatsEntry 7 } atmImaStatsFeRxNumFailures OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a far-end receive failure alarm condition has been entered on this link (i.e. LIF, LODS, Mis-Connected, RDI-IMA)." ::= { atmImaStatsEntry 8 } atmImaStatsTxStuffs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts of stuff events inserted in the transmit direction." ::= { atmImaStatsEntry 9 } atmImaStatsRxStuffs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts of stuff events detected in the receive direction." ::= { atmImaStatsEntry 10 } ilmiStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IlmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an ILMI enabled interface." ::= { intfStatistics 9 } ilmiStatsEntry OBJECT-TYPE SYNTAX IlmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the ILMI statistics table." INDEX { ilmiStatsId } ::= { ilmiStatsTable 1 } IlmiStatsEntry ::= SEQUENCE { ilmiStatsId IntfIndex, ilmiStatsTimer Integer32, ilmiStatsLinkResets Integer32, ilmiStatsAttachPtChanged Integer32, ilmiStatsAttachPtVerified Integer32, ilmiStatsSecureLnkProcInit Integer32, ilmiStatsColdStartRx Integer32, ilmiStatsColdStartTx Integer32, ilmiStatsPduRx Integer32, ilmiStatsPduTx Integer32, ilmiStatsReqTimeouts Integer32, ilmiStatsPacketDisc Integer32 } ilmiStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) for the ILMI interface." ::= { ilmiStatsEntry 1 } ilmiStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last statistics reset." ::= { ilmiStatsEntry 2 } ilmiStatsLinkResets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times connectivity has toggled between down and up." ::= { ilmiStatsEntry 3 } ilmiStatsAttachPtChanged OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Attachment Point change was detected." ::= { ilmiStatsEntry 4 } ilmiStatsAttachPtVerified OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Attachment Point was verified successfully." ::= { ilmiStatsEntry 5 } ilmiStatsSecureLnkProcInit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Secure Link Procedure was initiated." ::= { ilmiStatsEntry 6 } ilmiStatsColdStartRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Cold Start trap was received." ::= { ilmiStatsEntry 7 } ilmiStatsColdStartTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Cold Start trap was transmitted." ::= { ilmiStatsEntry 8 } ilmiStatsPduRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ilmi pdu received" ::= { ilmiStatsEntry 9 } ilmiStatsPduTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ilmi pdu transmitted" ::= { ilmiStatsEntry 10 } ilmiStatsReqTimeouts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times getRequest of any type timed out." ::= { ilmiStatsEntry 11 } ilmiStatsPacketDisc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times a received packet was discarded." ::= { ilmiStatsEntry 12 } -- Virtual UNI ILMI statistics table vuniIlmiStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VuniIlmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for an ILMI enabled interface." ::= { intfStatistics 12 } vuniIlmiStatsEntry OBJECT-TYPE SYNTAX VuniIlmiStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the ILMI statistics table." INDEX { vuniIlmiStatsId, vuniIlmiVUNIId } ::= { vuniIlmiStatsTable 1 } VuniIlmiStatsEntry ::= SEQUENCE { vuniIlmiStatsId IntfIndex, vuniIlmiVUNIId INTEGER, vuniIlmiStatsTimer Integer32, vuniIlmiStatsLinkResets Integer32, vuniIlmiStatsAttachPtChanged Integer32, vuniIlmiStatsAttachPtVerified Integer32, vuniIlmiStatsSecureLnkProcInit Integer32, vuniIlmiStatsColdStartRx Integer32, vuniIlmiStatsColdStartTx Integer32, vuniIlmiStatsPduRx Integer32, vuniIlmiStatsPduTx Integer32, vuniIlmiStatsReqTimeouts Integer32, vuniIlmiStatsPacketDisc Integer32, vuniResetIlmiStatistics INTEGER } vuniIlmiStatsId OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) for the ILMI interface." ::= { vuniIlmiStatsEntry 1 } vuniIlmiVUNIId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual UNI number, second index to access the ILMI on virtual UNI interface." DEFVAL { 1 } ::= { vuniIlmiStatsEntry 2 } vuniIlmiStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last statistics reset." ::= { vuniIlmiStatsEntry 3 } vuniIlmiStatsLinkResets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times connectivity has toggled between down and up." ::= { vuniIlmiStatsEntry 4 } vuniIlmiStatsAttachPtChanged OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Attachment Point change was detected." ::= { vuniIlmiStatsEntry 5 } vuniIlmiStatsAttachPtVerified OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Attachment Point was verified successfully." ::= { vuniIlmiStatsEntry 6 } vuniIlmiStatsSecureLnkProcInit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Secure Link Procedure was initiated." ::= { vuniIlmiStatsEntry 7 } vuniIlmiStatsColdStartRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Cold Start trap was received." ::= { vuniIlmiStatsEntry 8 } vuniIlmiStatsColdStartTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Cold Start trap was transmitted." ::= { vuniIlmiStatsEntry 9 } vuniIlmiStatsPduRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "vuniIlmi pdu received" ::= { vuniIlmiStatsEntry 10 } vuniIlmiStatsPduTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "vuniIlmi pdu transmitted" ::= { vuniIlmiStatsEntry 11 } vuniIlmiStatsReqTimeouts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times getRequest of any type timed out." ::= { vuniIlmiStatsEntry 12 } vuniIlmiStatsPacketDisc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times a received packet was discarded." ::= { vuniIlmiStatsEntry 13 } vuniResetIlmiStatistics OBJECT-TYPE SYNTAX INTEGER { noAction (1), reset (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC) and vuni Id" DEFVAL { noAction } ::= { vuniIlmiStatsEntry 14} -- Connection Statistics Group connectionStatistics atmPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 1 } atmPvcVccStatsEntry OBJECT-TYPE SYNTAX AtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { atmPvcVccStatsIfA, atmPvcVccStatsVpiA, atmPvcVccStatsVciA, atmPvcVccStatsIfB, atmPvcVccStatsVpiB, atmPvcVccStatsVciB } ::= { atmPvcVccStatsTable 1} AtmPvcVccStatsEntry ::= SEQUENCE { atmPvcVccStatsIfA IntfIndex, atmPvcVccStatsVpiA INTEGER, atmPvcVccStatsVciA INTEGER, atmPvcVccStatsIfB IntfIndex, atmPvcVccStatsVpiB INTEGER, atmPvcVccStatsVciB INTEGER, atmPvcVccStatsInCellCountHiA Integer32, atmPvcVccStatsInCellCountLoA Integer32, atmPvcVccStatsOutCellCountHiA Integer32, atmPvcVccStatsOutCellCountLoA Integer32, atmPvcVccStatsInCellCountHiB Integer32, atmPvcVccStatsInCellCountLoB Integer32, atmPvcVccStatsOutCellCountHiB Integer32, atmPvcVccStatsOutCellCountLoB Integer32, atmPvcVccStatsTimer Integer32, atmPvcVccStatsFrwdErrCrrctnRateA2B INTEGER, atmPvcVccStatsFrwdErrCrrctnRateB2A INTEGER, atmPvcVccStatsInOdometerCellCountHiA Integer32, atmPvcVccStatsInOdometerCellCountLoA Integer32, atmPvcVccStatsOutOdometerCellCountHiA Integer32, atmPvcVccStatsOutOdometerCellCountLoA Integer32, atmPvcVccStatsInOdometerCellCountHiB Integer32, atmPvcVccStatsInOdometerCellCountLoB Integer32, atmPvcVccStatsOutOdometerCellCountHiB Integer32, atmPvcVccStatsOutOdometerCellCountLoB Integer32, atmPvcVccStatsOdometerTimer Integer32, atmPvcVccStatsOdometerReset INTEGER, atmPvcVccStatsOamAisTxA Integer32, atmPvcVccStatsOamAisRxA Integer32, atmPvcVccStatsOamRdiTxA Integer32, atmPvcVccStatsOamRdiRxA Integer32, atmPvcVccStatsOamAisTxB Integer32, atmPvcVccStatsOamAisRxB Integer32, atmPvcVccStatsOamRdiTxB Integer32, atmPvcVccStatsOamRdiRxB Integer32, atmPvcVccStatsCellsDroppedA Integer32, atmPvcVccStatsCellsTaggedA Integer32, atmPvcVccStatsCellsDroppedB Integer32, atmPvcVccStatsCellsTaggedB Integer32 } atmPvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { atmPvcVccStatsEntry 1 } atmPvcVccStatsVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side A" ::= { atmPvcVccStatsEntry 2 } atmPvcVccStatsVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side A" ::= { atmPvcVccStatsEntry 3 } atmPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { atmPvcVccStatsEntry 4 } atmPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { atmPvcVccStatsEntry 5 } atmPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { atmPvcVccStatsEntry 6 } atmPvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVccStatsEntry 7 } atmPvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 8 } atmPvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 9 } atmPvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 10 } atmPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVccStatsEntry 11 } atmPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 12 } atmPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 13 } atmPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 14 } atmPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmPvcVccStatsEntry 15 } atmPvcVccStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmPvcVccStatsEntry 16 } atmPvcVccStatsFrwdErrCrrctnRateB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmPvcVccStatsEntry 17 } atmPvcVccStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVccStatsEntry 18 } atmPvcVccStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 19 } atmPvcVccStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 20 } atmPvcVccStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 21 } atmPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVccStatsEntry 22 } atmPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 23 } atmPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 24 } atmPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVccStatsEntry 25 } atmPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmPvcVccStatsEntry 26 } atmPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmPvcVccStatsEntry 27 } atmPvcVccStatsOamAisTxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { atmPvcVccStatsEntry 28 } atmPvcVccStatsOamAisRxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { atmPvcVccStatsEntry 29 } atmPvcVccStatsOamRdiTxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { atmPvcVccStatsEntry 30 } atmPvcVccStatsOamRdiRxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { atmPvcVccStatsEntry 31 } atmPvcVccStatsOamAisTxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { atmPvcVccStatsEntry 32 } atmPvcVccStatsOamAisRxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { atmPvcVccStatsEntry 33 } atmPvcVccStatsOamRdiTxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { atmPvcVccStatsEntry 34 } atmPvcVccStatsOamRdiRxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { atmPvcVccStatsEntry 35 } atmPvcVccStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmPvcVccStatsEntry 36 } atmPvcVccStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmPvcVccStatsEntry 37 } atmPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmPvcVccStatsEntry 38 } atmPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmPvcVccStatsEntry 39 } atmPvcVpcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmPvcVpcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 2 } atmPvcVpcStatsEntry OBJECT-TYPE SYNTAX AtmPvcVpcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { atmPvcVpcStatsIfA, atmPvcVpcStatsVpiA, atmPvcVpcStatsIfB, atmPvcVpcStatsVpiB } ::= { atmPvcVpcStatsTable 1} AtmPvcVpcStatsEntry ::= SEQUENCE { atmPvcVpcStatsIfA IntfIndex, atmPvcVpcStatsVpiA INTEGER, atmPvcVpcStatsIfB IntfIndex, atmPvcVpcStatsVpiB INTEGER, atmPvcVpcStatsInCellCountHiA Integer32, atmPvcVpcStatsInCellCountLoA Integer32, atmPvcVpcStatsOutCellCountHiA Integer32, atmPvcVpcStatsOutCellCountLoA Integer32, atmPvcVpcStatsInCellCountHiB Integer32, atmPvcVpcStatsInCellCountLoB Integer32, atmPvcVpcStatsOutCellCountHiB Integer32, atmPvcVpcStatsOutCellCountLoB Integer32, atmPvcVpcStatsTimer Integer32, atmPvcVpcStatsInOdometerCellCountHiA Integer32, atmPvcVpcStatsInOdometerCellCountLoA Integer32, atmPvcVpcStatsOutOdometerCellCountHiA Integer32, atmPvcVpcStatsOutOdometerCellCountLoA Integer32, atmPvcVpcStatsInOdometerCellCountHiB Integer32, atmPvcVpcStatsInOdometerCellCountLoB Integer32, atmPvcVpcStatsOutOdometerCellCountHiB Integer32, atmPvcVpcStatsOutOdometerCellCountLoB Integer32, atmPvcVpcStatsOdometerTimer Integer32, atmPvcVpcStatsOdometerReset INTEGER, atmPvcVpcStatsOamAisTxA Integer32, atmPvcVpcStatsOamAisRxA Integer32, atmPvcVpcStatsOamRdiTxA Integer32, atmPvcVpcStatsOamRdiRxA Integer32, atmPvcVpcStatsOamAisTxB Integer32, atmPvcVpcStatsOamAisRxB Integer32, atmPvcVpcStatsOamRdiTxB Integer32, atmPvcVpcStatsOamRdiRxB Integer32, atmPvcVpcStatsCellsDroppedA Integer32, atmPvcVpcStatsCellsTaggedA Integer32, atmPvcVpcStatsCellsDroppedB Integer32, atmPvcVpcStatsCellsTaggedB Integer32 } atmPvcVpcStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { atmPvcVpcStatsEntry 1 } atmPvcVpcStatsVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side A" ::= { atmPvcVpcStatsEntry 2 } atmPvcVpcStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { atmPvcVpcStatsEntry 3 } atmPvcVpcStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { atmPvcVpcStatsEntry 4 } atmPvcVpcStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 5 } atmPvcVpcStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 6 } atmPvcVpcStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 7 } atmPvcVpcStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 8 } atmPvcVpcStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 9 } atmPvcVpcStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 10 } atmPvcVpcStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 11 } atmPvcVpcStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 12 } atmPvcVpcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmPvcVpcStatsEntry 13 } atmPvcVpcStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 14 } atmPvcVpcStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 15 } atmPvcVpcStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 16 } atmPvcVpcStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 17 } atmPvcVpcStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 18 } atmPvcVpcStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmPvcVpcStatsEntry 19 } atmPvcVpcStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 20 } atmPvcVpcStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmPvcVpcStatsEntry 21 } atmPvcVpcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmPvcVpcStatsEntry 22 } atmPvcVpcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmPvcVpcStatsEntry 23 } atmPvcVpcStatsOamAisTxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { atmPvcVpcStatsEntry 24 } atmPvcVpcStatsOamAisRxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { atmPvcVpcStatsEntry 25 } atmPvcVpcStatsOamRdiTxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { atmPvcVpcStatsEntry 26 } atmPvcVpcStatsOamRdiRxA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { atmPvcVpcStatsEntry 27 } atmPvcVpcStatsOamAisTxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { atmPvcVpcStatsEntry 28 } atmPvcVpcStatsOamAisRxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { atmPvcVpcStatsEntry 29 } atmPvcVpcStatsOamRdiTxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { atmPvcVpcStatsEntry 30 } atmPvcVpcStatsOamRdiRxB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { atmPvcVpcStatsEntry 31 } atmPvcVpcStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmPvcVpcStatsEntry 32 } atmPvcVpcStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmPvcVpcStatsEntry 33 } atmPvcVpcStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmPvcVpcStatsEntry 34 } atmPvcVpcStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmPvcVpcStatsEntry 35 } atmSvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 3 } atmSvcVccStatsEntry OBJECT-TYPE SYNTAX AtmSvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { atmSvcVccStatsIfA, atmSvcVccStatsVpiA, atmSvcVccStatsVciA, atmSvcVccStatsIfB, atmSvcVccStatsVpiB, atmSvcVccStatsVciB } ::= { atmSvcVccStatsTable 1} AtmSvcVccStatsEntry ::= SEQUENCE { atmSvcVccStatsIfA IntfIndex, atmSvcVccStatsVpiA INTEGER, atmSvcVccStatsVciA INTEGER, atmSvcVccStatsIfB IntfIndex, atmSvcVccStatsVpiB INTEGER, atmSvcVccStatsVciB INTEGER, atmSvcVccStatsInCellCountHiA Integer32, atmSvcVccStatsInCellCountLoA Integer32, atmSvcVccStatsOutCellCountHiA Integer32, atmSvcVccStatsOutCellCountLoA Integer32, atmSvcVccStatsInCellCountHiB Integer32, atmSvcVccStatsInCellCountLoB Integer32, atmSvcVccStatsOutCellCountHiB Integer32, atmSvcVccStatsOutCellCountLoB Integer32, atmSvcVccStatsTimer Integer32, atmSvcVccStatsInOdometerCellCountHiA Integer32, atmSvcVccStatsInOdometerCellCountLoA Integer32, atmSvcVccStatsOutOdometerCellCountHiA Integer32, atmSvcVccStatsOutOdometerCellCountLoA Integer32, atmSvcVccStatsInOdometerCellCountHiB Integer32, atmSvcVccStatsInOdometerCellCountLoB Integer32, atmSvcVccStatsOutOdometerCellCountHiB Integer32, atmSvcVccStatsOutOdometerCellCountLoB Integer32, atmSvcVccStatsOdometerTimer Integer32, atmSvcVccStatsOdometerReset INTEGER, atmSvcVccStatsCellsDroppedA Integer32, atmSvcVccStatsCellsTaggedA Integer32, atmSvcVccStatsCellsDroppedB Integer32, atmSvcVccStatsCellsTaggedB Integer32 } atmSvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { atmSvcVccStatsEntry 1 } atmSvcVccStatsVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side A" ::= { atmSvcVccStatsEntry 2 } atmSvcVccStatsVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side A" ::= { atmSvcVccStatsEntry 3 } atmSvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { atmSvcVccStatsEntry 4 } atmSvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { atmSvcVccStatsEntry 5 } atmSvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { atmSvcVccStatsEntry 6 } atmSvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 7 } atmSvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 8 } atmSvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 9 } atmSvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 10 } atmSvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 11 } atmSvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 12 } atmSvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 13 } atmSvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 14 } atmSvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmSvcVccStatsEntry 15 } atmSvcVccStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 16 } atmSvcVccStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 17 } atmSvcVccStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 18 } atmSvcVccStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 19 } atmSvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 20 } atmSvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSvcVccStatsEntry 21 } atmSvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 22 } atmSvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSvcVccStatsEntry 23 } atmSvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmSvcVccStatsEntry 24 } atmSvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmSvcVccStatsEntry 25 } atmSvcVccStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmSvcVccStatsEntry 26 } atmSvcVccStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmSvcVccStatsEntry 27 } atmSvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmSvcVccStatsEntry 28 } atmSvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmSvcVccStatsEntry 29 } ipAtmAppPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAtmAppPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Statistics entries" ::= { connectionStatistics 4 } ipAtmAppPvcVccStatsEntry OBJECT-TYPE SYNTAX IpAtmAppPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for statistics attribution." INDEX { ipAtmAppPvcVccStatsDestAddrA, ipAtmAppPvcVccStatsSubnetMaskA, ipAtmAppPvcVccStatsIfB, ipAtmAppPvcVccStatsVpiB, ipAtmAppPvcVccStatsVciB } ::= { ipAtmAppPvcVccStatsTable 1} IpAtmAppPvcVccStatsEntry ::= SEQUENCE { ipAtmAppPvcVccStatsDestAddrA IpAddress, ipAtmAppPvcVccStatsSubnetMaskA IpAddress, ipAtmAppPvcVccStatsIfB IntfIndex, ipAtmAppPvcVccStatsVpiB INTEGER, ipAtmAppPvcVccStatsVciB INTEGER, ipAtmAppPvcVccStatsInCellCountHiA Integer32, ipAtmAppPvcVccStatsInCellCountLoA Integer32, ipAtmAppPvcVccStatsOutCellCountHiA Integer32, ipAtmAppPvcVccStatsOutCellCountLoA Integer32, ipAtmAppPvcVccStatsFramesInB Integer32, ipAtmAppPvcVccStatsFramesOutB Integer32, ipAtmAppPvcVccStatsInCellCountHiB Integer32, ipAtmAppPvcVccStatsInCellCountLoB Integer32, ipAtmAppPvcVccStatsOutCellCountHiB Integer32, ipAtmAppPvcVccStatsOutCellCountLoB Integer32, ipAtmAppPvcVccStatsTimer Integer32, ipAtmAppPvcVccStatsInOdometerCellCountHiA Integer32, ipAtmAppPvcVccStatsInOdometerCellCountLoA Integer32, ipAtmAppPvcVccStatsOutOdometerCellCountHiA Integer32, ipAtmAppPvcVccStatsOutOdometerCellCountLoA Integer32, ipAtmAppPvcVccStatsOdometerFramesInB Integer32, ipAtmAppPvcVccStatsOdometerFramesOutB Integer32, ipAtmAppPvcVccStatsInOdometerCellCountHiB Integer32, ipAtmAppPvcVccStatsInOdometerCellCountLoB Integer32, ipAtmAppPvcVccStatsOutOdometerCellCountHiB Integer32, ipAtmAppPvcVccStatsOutOdometerCellCountLoB Integer32, ipAtmAppPvcVccStatsOdometerTimer Integer32, ipAtmAppPvcVccStatsOdometerReset INTEGER, ipAtmAppPvcVccStatsCellsDroppedB Integer32, ipAtmAppPvcVccStatsCellsTaggedB Integer32 } ipAtmAppPvcVccStatsDestAddrA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics destination IP address" ::= { ipAtmAppPvcVccStatsEntry 1 } ipAtmAppPvcVccStatsSubnetMaskA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subnet mask of the destination IP address. Value is an IP address." ::= { ipAtmAppPvcVccStatsEntry 2 } ipAtmAppPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { ipAtmAppPvcVccStatsEntry 3 } ipAtmAppPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { ipAtmAppPvcVccStatsEntry 4 } ipAtmAppPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { ipAtmAppPvcVccStatsEntry 5 } ipAtmAppPvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 6 } ipAtmAppPvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 7 } ipAtmAppPvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 8 } ipAtmAppPvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 9 } ipAtmAppPvcVccStatsFramesInB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames received on side B." ::= { ipAtmAppPvcVccStatsEntry 10 } ipAtmAppPvcVccStatsFramesOutB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of frames sent from side B." ::= { ipAtmAppPvcVccStatsEntry 11 } ipAtmAppPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 12 } ipAtmAppPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 13 } ipAtmAppPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 14 } ipAtmAppPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 15 } ipAtmAppPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { ipAtmAppPvcVccStatsEntry 16 } ipAtmAppPvcVccStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 17 } ipAtmAppPvcVccStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 18 } ipAtmAppPvcVccStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 19 } ipAtmAppPvcVccStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 20 } ipAtmAppPvcVccStatsOdometerFramesInB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid frames received at side B." ::= { ipAtmAppPvcVccStatsEntry 21 } ipAtmAppPvcVccStatsOdometerFramesOutB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid frames transmitted from side B." ::= { ipAtmAppPvcVccStatsEntry 22 } ipAtmAppPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 23 } ipAtmAppPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 24 } ipAtmAppPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 25 } ipAtmAppPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppPvcVccStatsEntry 26 } ipAtmAppPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { ipAtmAppPvcVccStatsEntry 27 } ipAtmAppPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { ipAtmAppPvcVccStatsEntry 28 } ipAtmAppPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { ipAtmAppPvcVccStatsEntry 29 } ipAtmAppPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { ipAtmAppPvcVccStatsEntry 30 } ipAtmAppSvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAtmAppSvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics entries" ::= { connectionStatistics 5 } ipAtmAppSvcVccStatsEntry OBJECT-TYPE SYNTAX IpAtmAppSvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of statistics attributes." INDEX { ipAtmAppSvcVccStatsDestAddrA, ipAtmAppSvcVccStatsSubnetMaskA, ipAtmAppSvcVccStatsIfB, ipAtmAppSvcVccStatsVpiB, ipAtmAppSvcVccStatsVciB } ::= { ipAtmAppSvcVccStatsTable 1} IpAtmAppSvcVccStatsEntry ::= SEQUENCE { ipAtmAppSvcVccStatsDestAddrA IpAddress, ipAtmAppSvcVccStatsSubnetMaskA IpAddress, ipAtmAppSvcVccStatsIfB IntfIndex, ipAtmAppSvcVccStatsVpiB INTEGER, ipAtmAppSvcVccStatsVciB INTEGER, ipAtmAppSvcVccStatsInCellCountHiA Integer32, ipAtmAppSvcVccStatsInCellCountLoA Integer32, ipAtmAppSvcVccStatsOutCellCountHiA Integer32, ipAtmAppSvcVccStatsOutCellCountLoA Integer32, ipAtmAppSvcVccStatsFramesInB Integer32, ipAtmAppSvcVccStatsFramesOutB Integer32, ipAtmAppSvcVccStatsInCellCountHiB Integer32, ipAtmAppSvcVccStatsInCellCountLoB Integer32, ipAtmAppSvcVccStatsOutCellCountHiB Integer32, ipAtmAppSvcVccStatsOutCellCountLoB Integer32, ipAtmAppSvcVccStatsTimer Integer32, ipAtmAppSvcVccStatsCellsDroppedB Integer32, ipAtmAppSvcVccStatsCellsTaggedB Integer32 } ipAtmAppSvcVccStatsDestAddrA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics destination IP address " ::= { ipAtmAppSvcVccStatsEntry 1 } ipAtmAppSvcVccStatsSubnetMaskA OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subnet mask of the destination IP address. Value is an IP address." ::= { ipAtmAppSvcVccStatsEntry 2 } ipAtmAppSvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { ipAtmAppSvcVccStatsEntry 3 } ipAtmAppSvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { ipAtmAppSvcVccStatsEntry 4 } ipAtmAppSvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { ipAtmAppSvcVccStatsEntry 5 } ipAtmAppSvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 6 } ipAtmAppSvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 7 } ipAtmAppSvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 8 } ipAtmAppSvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 9 } ipAtmAppSvcVccStatsFramesInB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames received at side B." ::= { ipAtmAppSvcVccStatsEntry 10 } ipAtmAppSvcVccStatsFramesOutB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames transmitted from side B." ::= { ipAtmAppSvcVccStatsEntry 11 } ipAtmAppSvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 12 } ipAtmAppSvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 13 } ipAtmAppSvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 14 } ipAtmAppSvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { ipAtmAppSvcVccStatsEntry 15 } ipAtmAppSvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { ipAtmAppSvcVccStatsEntry 16 } ipAtmAppSvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { ipAtmAppSvcVccStatsEntry 17 } ipAtmAppSvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { ipAtmAppSvcVccStatsEntry 18 } cirEmAtmPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 6 } cirEmAtmPvcVccStatsEntry OBJECT-TYPE SYNTAX CirEmAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { cirEmAtmPvcVccStatsIfA, cirEmAtmPvcVccStatsIfB, cirEmAtmPvcVccStatsVpiB, cirEmAtmPvcVccStatsVciB } ::= { cirEmAtmPvcVccStatsTable 1} CirEmAtmPvcVccStatsEntry ::= SEQUENCE { cirEmAtmPvcVccStatsIfA IntfIndex, cirEmAtmPvcVccStatsIfB IntfIndex, cirEmAtmPvcVccStatsVpiB INTEGER, cirEmAtmPvcVccStatsVciB INTEGER, cirEmAtmPvcVccStatsCellsEncodedHiA Integer32, cirEmAtmPvcVccStatsCellsEncodedLoA Integer32, cirEmAtmPvcVccStatsCellsDecodedHiA Integer32, cirEmAtmPvcVccStatsCellsDecodedLoA Integer32, cirEmAtmPvcVccStatsInCellCountHiB Integer32, cirEmAtmPvcVccStatsInCellCountLoB Integer32, cirEmAtmPvcVccStatsOutCellCountHiB Integer32, cirEmAtmPvcVccStatsOutCellCountLoB Integer32, cirEmAtmPvcVccStatsTimer Integer32, cirEmAtmPvcVccStatsOdometerCellsEncodedHiA Integer32, cirEmAtmPvcVccStatsOdometerCellsEncodedLoA Integer32, cirEmAtmPvcVccStatsOdometerCellsDecodedHiA Integer32, cirEmAtmPvcVccStatsOdometerCellsDecodedLoA Integer32, cirEmAtmPvcVccStatsInOdometerCellCountHiB Integer32, cirEmAtmPvcVccStatsInOdometerCellCountLoB Integer32, cirEmAtmPvcVccStatsOutOdometerCellCountHiB Integer32, cirEmAtmPvcVccStatsOutOdometerCellCountLoB Integer32, cirEmAtmPvcVccStatsOdometerTimer Integer32, cirEmAtmPvcVccStatsOdometerReset INTEGER, cirEmAtmPvcVccStatsOamAisTx Integer32, cirEmAtmPvcVccStatsOamAisRx Integer32, cirEmAtmPvcVccStatsOamRdiTx Integer32, cirEmAtmPvcVccStatsOamRdiRx Integer32, cirEmAtmPvcVccStatsCellsDroppedB Integer32, cirEmAtmPvcVccStatsCellsTaggedB Integer32 } cirEmAtmPvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { cirEmAtmPvcVccStatsEntry 1 } cirEmAtmPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { cirEmAtmPvcVccStatsEntry 2 } cirEmAtmPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { cirEmAtmPvcVccStatsEntry 3 } cirEmAtmPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { cirEmAtmPvcVccStatsEntry 4 } cirEmAtmPvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells encoded on side A- (High order portion)" ::= { cirEmAtmPvcVccStatsEntry 5 } cirEmAtmPvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { cirEmAtmPvcVccStatsEntry 6 } cirEmAtmPvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { cirEmAtmPvcVccStatsEntry 7 } cirEmAtmPvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { cirEmAtmPvcVccStatsEntry 8 } cirEmAtmPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 9 } cirEmAtmPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 10 } cirEmAtmPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 11 } cirEmAtmPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 12 } cirEmAtmPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { cirEmAtmPvcVccStatsEntry 13 } cirEmAtmPvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { cirEmAtmPvcVccStatsEntry 14 } cirEmAtmPvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { cirEmAtmPvcVccStatsEntry 15 } cirEmAtmPvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { cirEmAtmPvcVccStatsEntry 16 } cirEmAtmPvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { cirEmAtmPvcVccStatsEntry 17 } cirEmAtmPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 18 } cirEmAtmPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 19 } cirEmAtmPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 20 } cirEmAtmPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmPvcVccStatsEntry 21 } cirEmAtmPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { cirEmAtmPvcVccStatsEntry 22 } cirEmAtmPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { cirEmAtmPvcVccStatsEntry 23 } cirEmAtmPvcVccStatsOamAisTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { cirEmAtmPvcVccStatsEntry 24 } cirEmAtmPvcVccStatsOamAisRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { cirEmAtmPvcVccStatsEntry 25 } cirEmAtmPvcVccStatsOamRdiTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { cirEmAtmPvcVccStatsEntry 26 } cirEmAtmPvcVccStatsOamRdiRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { cirEmAtmPvcVccStatsEntry 27 } cirEmAtmPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { cirEmAtmPvcVccStatsEntry 28 } cirEmAtmPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { cirEmAtmPvcVccStatsEntry 29 } frAtmPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 7 } frAtmPvcVccStatsEntry OBJECT-TYPE SYNTAX FrAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { frAtmPvcVccStatsIfA, frAtmPvcVccStatsDlciA, frAtmPvcVccStatsIfB, frAtmPvcVccStatsVpiB, frAtmPvcVccStatsVciB } ::= { frAtmPvcVccStatsTable 1} FrAtmPvcVccStatsEntry ::= SEQUENCE { frAtmPvcVccStatsIfA IntfIndex, frAtmPvcVccStatsDlciA INTEGER, frAtmPvcVccStatsIfB IntfIndex, frAtmPvcVccStatsVpiB INTEGER, frAtmPvcVccStatsVciB INTEGER, frAtmPvcVccStatsCellsEncodedHiA Integer32, frAtmPvcVccStatsCellsEncodedLoA Integer32, frAtmPvcVccStatsCellsDecodedHiA Integer32, frAtmPvcVccStatsCellsDecodedLoA Integer32, frAtmPvcVccStatsInCellCountHiB Integer32, frAtmPvcVccStatsInCellCountLoB Integer32, frAtmPvcVccStatsOutCellCountHiB Integer32, frAtmPvcVccStatsOutCellCountLoB Integer32, frAtmPvcVccStatsTimer Integer32, frAtmPvcVccStatsFramesDroppedA Integer32, frAtmPvcVccStatsOdometerCellsEncodedHiA Integer32, frAtmPvcVccStatsOdometerCellsEncodedLoA Integer32, frAtmPvcVccStatsOdometerCellsDecodedHiA Integer32, frAtmPvcVccStatsOdometerCellsDecodedLoA Integer32, frAtmPvcVccStatsInOdometerCellCountHiB Integer32, frAtmPvcVccStatsInOdometerCellCountLoB Integer32, frAtmPvcVccStatsOutOdometerCellCountHiB Integer32, frAtmPvcVccStatsOutOdometerCellCountLoB Integer32, frAtmPvcVccStatsOdometerTimer Integer32, frAtmPvcVccStatsOdometerFramesDroppedA Integer32, frAtmPvcVccStatsOdometerReset INTEGER, frAtmPvcVccStatsOamAisTx Integer32, frAtmPvcVccStatsOamAisRx Integer32, frAtmPvcVccStatsOamRdiTx Integer32, frAtmPvcVccStatsOamRdiRx Integer32, frAtmPvcVccStatsAal5ErrFramesA Integer32, frAtmPvcVccStatsFramesTaggedA Integer32, frAtmPvcVccStatsCellsDroppedB Integer32, frAtmPvcVccStatsCellsTaggedB Integer32 } frAtmPvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { frAtmPvcVccStatsEntry 1 } frAtmPvcVccStatsDlciA OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "dlci - side A " ::= { frAtmPvcVccStatsEntry 2 } frAtmPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { frAtmPvcVccStatsEntry 3 } frAtmPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI on side B" ::= { frAtmPvcVccStatsEntry 4 } frAtmPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI on side B" ::= { frAtmPvcVccStatsEntry 5 } frAtmPvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { frAtmPvcVccStatsEntry 6 } frAtmPvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { frAtmPvcVccStatsEntry 7 } frAtmPvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { frAtmPvcVccStatsEntry 8 } frAtmPvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { frAtmPvcVccStatsEntry 9 } frAtmPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmPvcVccStatsEntry 10 } frAtmPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmPvcVccStatsEntry 11 } frAtmPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmPvcVccStatsEntry 12 } frAtmPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmPvcVccStatsEntry 13 } frAtmPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { frAtmPvcVccStatsEntry 14 } frAtmPvcVccStatsFramesDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side." ::= { frAtmPvcVccStatsEntry 15 } frAtmPvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { frAtmPvcVccStatsEntry 16 } frAtmPvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { frAtmPvcVccStatsEntry 17 } frAtmPvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { frAtmPvcVccStatsEntry 18 } frAtmPvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { frAtmPvcVccStatsEntry 19 } frAtmPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmPvcVccStatsEntry 20 } frAtmPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { frAtmPvcVccStatsEntry 21 } frAtmPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmPvcVccStatsEntry 22 } frAtmPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { frAtmPvcVccStatsEntry 23 } frAtmPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { frAtmPvcVccStatsEntry 24 } frAtmPvcVccStatsOdometerFramesDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side." ::= { frAtmPvcVccStatsEntry 25 } frAtmPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { frAtmPvcVccStatsEntry 26 } frAtmPvcVccStatsOamAisTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { frAtmPvcVccStatsEntry 27 } frAtmPvcVccStatsOamAisRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { frAtmPvcVccStatsEntry 28 } frAtmPvcVccStatsOamRdiTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { frAtmPvcVccStatsEntry 29 } frAtmPvcVccStatsOamRdiRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { frAtmPvcVccStatsEntry 30 } frAtmPvcVccStatsAal5ErrFramesA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side" ::= { frAtmPvcVccStatsEntry 31 } frAtmPvcVccStatsFramesTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side" ::= { frAtmPvcVccStatsEntry 32 } frAtmPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { frAtmPvcVccStatsEntry 33 } frAtmPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { frAtmPvcVccStatsEntry 34 } frFrPvcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrFrPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 8 } frFrPvcStatsEntry OBJECT-TYPE SYNTAX FrFrPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { frFrPvcStatsIfA, frFrPvcStatsDlciA, frFrPvcStatsIfB, frFrPvcStatsDlciB } ::= { frFrPvcStatsTable 1} FrFrPvcStatsEntry ::= SEQUENCE { frFrPvcStatsIfA IntfIndex, frFrPvcStatsDlciA INTEGER, frFrPvcStatsIfB IntfIndex, frFrPvcStatsDlciB INTEGER, frFrPvcStatsCellsEncodedHiA Integer32, frFrPvcStatsCellsEncodedLoA Integer32, frFrPvcStatsCellsDecodedHiA Integer32, frFrPvcStatsCellsDecodedLoA Integer32, frFrPvcStatsCellsEncodedHiB Integer32, frFrPvcStatsCellsEncodedLoB Integer32, frFrPvcStatsCellsDecodedHiB Integer32, frFrPvcStatsCellsDecodedLoB Integer32, frFrPvcStatsTimer Integer32, frFrPvcStatsFramesDroppedA Integer32, frFrPvcStatsFramesDroppedB Integer32, frFrPvcStatsOdometerCellsEncodedHiA Integer32, frFrPvcStatsOdometerCellsEncodedLoA Integer32, frFrPvcStatsOdometerCellsDecodedHiA Integer32, frFrPvcStatsOdometerCellsDecodedLoA Integer32, frFrPvcStatsOdometerCellsEncodedHiB Integer32, frFrPvcStatsOdometerCellsEncodedLoB Integer32, frFrPvcStatsOdometerCellsDecodedHiB Integer32, frFrPvcStatsOdometerCellsDecodedLoB Integer32, frFrPvcStatsOdometerTimer Integer32, frFrPvcStatsOdometerFramesDroppedA Integer32, frFrPvcStatsOdometerFramesDroppedB Integer32, frFrPvcStatsOdometerReset INTEGER, frFrPvcStatsAal5ErrFramesA Integer32, frFrPvcStatsAal5ErrFramesB Integer32, frFrPvcStatsFramesTaggedA Integer32, frFrPvcStatsFramesTaggedB Integer32 } frFrPvcStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { frFrPvcStatsEntry 1 } frFrPvcStatsDlciA OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "dlci - side A" ::= { frFrPvcStatsEntry 2 } frFrPvcStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { frFrPvcStatsEntry 3 } frFrPvcStatsDlciB OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "dlci - side B" ::= { frFrPvcStatsEntry 4 } frFrPvcStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { frFrPvcStatsEntry 5 } frFrPvcStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { frFrPvcStatsEntry 6 } frFrPvcStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { frFrPvcStatsEntry 7 } frFrPvcStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { frFrPvcStatsEntry 8 } frFrPvcStatsCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (High order portion)" ::= { frFrPvcStatsEntry 9 } frFrPvcStatsCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (Low order portion) " ::= { frFrPvcStatsEntry 10 } frFrPvcStatsCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (High order portion) " ::= { frFrPvcStatsEntry 11 } frFrPvcStatsCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (Low order portion) " ::= { frFrPvcStatsEntry 12 } frFrPvcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { frFrPvcStatsEntry 13 } frFrPvcStatsFramesDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side." ::= { frFrPvcStatsEntry 14 } frFrPvcStatsFramesDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side." ::= { frFrPvcStatsEntry 15 } frFrPvcStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { frFrPvcStatsEntry 16 } frFrPvcStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { frFrPvcStatsEntry 17 } frFrPvcStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { frFrPvcStatsEntry 18 } frFrPvcStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { frFrPvcStatsEntry 19 } frFrPvcStatsOdometerCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (High order portion) " ::= { frFrPvcStatsEntry 20 } frFrPvcStatsOdometerCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (Low order portion) " ::= { frFrPvcStatsEntry 21 } frFrPvcStatsOdometerCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (High order portion) " ::= { frFrPvcStatsEntry 22 } frFrPvcStatsOdometerCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (Low order portion) " ::= { frFrPvcStatsEntry 23 } frFrPvcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { frFrPvcStatsEntry 24 } frFrPvcStatsOdometerFramesDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side." ::= { frFrPvcStatsEntry 25 } frFrPvcStatsOdometerFramesDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames dropped for a given DLCI for B2A direction, only applicable to the input side." ::= { frFrPvcStatsEntry 26 } frFrPvcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { frFrPvcStatsEntry 27 } frFrPvcStatsAal5ErrFramesA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side" ::= { frFrPvcStatsEntry 28 } frFrPvcStatsAal5ErrFramesB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Aal5 Errored Frames, which are not dropped due to UPC in B2A dir, only applicable to Input Side" ::= { frFrPvcStatsEntry 29 } frFrPvcStatsFramesTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side" ::= { frFrPvcStatsEntry 30 } frFrPvcStatsFramesTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frames tagged due to UPC in B2A dir, only applicable to Input Side" ::= { frFrPvcStatsEntry 31 } vbrAtmPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 9 } vbrAtmPvcVccStatsEntry OBJECT-TYPE SYNTAX VbrAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { vbrAtmPvcVccStatsIfA, vbrAtmPvcVccStatsIfB, vbrAtmPvcVccStatsVpiB, vbrAtmPvcVccStatsVciB } ::= { vbrAtmPvcVccStatsTable 1} VbrAtmPvcVccStatsEntry ::= SEQUENCE { vbrAtmPvcVccStatsIfA IntfIndex, vbrAtmPvcVccStatsIfB IntfIndex, vbrAtmPvcVccStatsVpiB INTEGER, vbrAtmPvcVccStatsVciB INTEGER, vbrAtmPvcVccStatsCellsEncodedHiA Integer32, vbrAtmPvcVccStatsCellsEncodedLoA Integer32, vbrAtmPvcVccStatsCellsDecodedHiA Integer32, vbrAtmPvcVccStatsCellsDecodedLoA Integer32, vbrAtmPvcVccStatsInCellCountHiB Integer32, vbrAtmPvcVccStatsInCellCountLoB Integer32, vbrAtmPvcVccStatsOutCellCountHiB Integer32, vbrAtmPvcVccStatsOutCellCountLoB Integer32, vbrAtmPvcVccStatsTimer Integer32, vbrAtmPvcVccStatsOdometerCellsEncodedHiA Integer32, vbrAtmPvcVccStatsOdometerCellsEncodedLoA Integer32, vbrAtmPvcVccStatsOdometerCellsDecodedHiA Integer32, vbrAtmPvcVccStatsOdometerCellsDecodedLoA Integer32, vbrAtmPvcVccStatsInOdometerCellCountHiB Integer32, vbrAtmPvcVccStatsInOdometerCellCountLoB Integer32, vbrAtmPvcVccStatsOutOdometerCellCountHiB Integer32, vbrAtmPvcVccStatsOutOdometerCellCountLoB Integer32, vbrAtmPvcVccStatsOdometerTimer Integer32, vbrAtmPvcVccStatsOdometerReset INTEGER, vbrAtmPvcVccStatsOamAisTx Integer32, vbrAtmPvcVccStatsOamAisRx Integer32, vbrAtmPvcVccStatsOamRdiTx Integer32, vbrAtmPvcVccStatsOamRdiRx Integer32, vbrAtmPvcVccStatsCellsDroppedB Integer32, vbrAtmPvcVccStatsCellsTaggedB Integer32 } vbrAtmPvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { vbrAtmPvcVccStatsEntry 1 } vbrAtmPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { vbrAtmPvcVccStatsEntry 2 } vbrAtmPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "vpi - side B " ::= { vbrAtmPvcVccStatsEntry 3 } vbrAtmPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "vci - side B " ::= { vbrAtmPvcVccStatsEntry 4 } vbrAtmPvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { vbrAtmPvcVccStatsEntry 5 } vbrAtmPvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { vbrAtmPvcVccStatsEntry 6 } vbrAtmPvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrAtmPvcVccStatsEntry 7 } vbrAtmPvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { vbrAtmPvcVccStatsEntry 8 } vbrAtmPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { vbrAtmPvcVccStatsEntry 10 } vbrAtmPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { vbrAtmPvcVccStatsEntry 11 } vbrAtmPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { vbrAtmPvcVccStatsEntry 12 } vbrAtmPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { vbrAtmPvcVccStatsEntry 13 } vbrAtmPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { vbrAtmPvcVccStatsEntry 14 } vbrAtmPvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { vbrAtmPvcVccStatsEntry 15 } vbrAtmPvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { vbrAtmPvcVccStatsEntry 16 } vbrAtmPvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrAtmPvcVccStatsEntry 17 } vbrAtmPvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells decoded on side A- (Low order portion)" ::= { vbrAtmPvcVccStatsEntry 18 } vbrAtmPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { vbrAtmPvcVccStatsEntry 19 } vbrAtmPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { vbrAtmPvcVccStatsEntry 20 } vbrAtmPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { vbrAtmPvcVccStatsEntry 21 } vbrAtmPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { vbrAtmPvcVccStatsEntry 22 } vbrAtmPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { vbrAtmPvcVccStatsEntry 23 } vbrAtmPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { vbrAtmPvcVccStatsEntry 24 } vbrAtmPvcVccStatsOamAisTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { vbrAtmPvcVccStatsEntry 25 } vbrAtmPvcVccStatsOamAisRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { vbrAtmPvcVccStatsEntry 26 } vbrAtmPvcVccStatsOamRdiTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { vbrAtmPvcVccStatsEntry 27 } vbrAtmPvcVccStatsOamRdiRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { vbrAtmPvcVccStatsEntry 28 } vbrAtmPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { vbrAtmPvcVccStatsEntry 29 } vbrAtmPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { vbrAtmPvcVccStatsEntry 30 } cirEmCirEmPvcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmCirEmPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 10 } cirEmCirEmPvcStatsEntry OBJECT-TYPE SYNTAX CirEmCirEmPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { cirEmCirEmPvcStatsIfA, cirEmCirEmPvcStatsIfB } ::= { cirEmCirEmPvcStatsTable 1} CirEmCirEmPvcStatsEntry ::= SEQUENCE { cirEmCirEmPvcStatsIfA IntfIndex, cirEmCirEmPvcStatsIfB IntfIndex, cirEmCirEmPvcStatsCellsEncodedHiA Integer32, cirEmCirEmPvcStatsCellsEncodedLoA Integer32, cirEmCirEmPvcStatsCellsDecodedHiA Integer32, cirEmCirEmPvcStatsCellsDecodedLoA Integer32, cirEmCirEmPvcStatsCellsEncodedHiB Integer32, cirEmCirEmPvcStatsCellsEncodedLoB Integer32, cirEmCirEmPvcStatsCellsDecodedHiB Integer32, cirEmCirEmPvcStatsCellsDecodedLoB Integer32, cirEmCirEmPvcStatsTimer Integer32, cirEmCirEmPvcStatsOdometerCellsEncodedHiA Integer32, cirEmCirEmPvcStatsOdometerCellsEncodedLoA Integer32, cirEmCirEmPvcStatsOdometerCellsDecodedHiA Integer32, cirEmCirEmPvcStatsOdometerCellsDecodedLoA Integer32, cirEmCirEmPvcStatsOdometerCellsEncodedHiB Integer32, cirEmCirEmPvcStatsOdometerCellsEncodedLoB Integer32, cirEmCirEmPvcStatsOdometerCellsDecodedHiB Integer32, cirEmCirEmPvcStatsOdometerCellsDecodedLoB Integer32, cirEmCirEmPvcStatsOdometerTimer Integer32, cirEmCirEmPvcStatsOdometerReset INTEGER } cirEmCirEmPvcStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { cirEmCirEmPvcStatsEntry 1 } cirEmCirEmPvcStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { cirEmCirEmPvcStatsEntry 2 } cirEmCirEmPvcStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 3 } cirEmCirEmPvcStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 4 } cirEmCirEmPvcStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 5 } cirEmCirEmPvcStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 6 } cirEmCirEmPvcStatsCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 7 } cirEmCirEmPvcStatsCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 8 } cirEmCirEmPvcStatsCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 9 } cirEmCirEmPvcStatsCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 10 } cirEmCirEmPvcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { cirEmCirEmPvcStatsEntry 11 } cirEmCirEmPvcStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 12 } cirEmCirEmPvcStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 13 } cirEmCirEmPvcStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 14 } cirEmCirEmPvcStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 15 } cirEmCirEmPvcStatsOdometerCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 16 } cirEmCirEmPvcStatsOdometerCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmCirEmPvcStatsEntry 17 } cirEmCirEmPvcStatsOdometerCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 18 } cirEmCirEmPvcStatsOdometerCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmCirEmPvcStatsEntry 19 } cirEmCirEmPvcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { cirEmCirEmPvcStatsEntry 20 } cirEmCirEmPvcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { cirEmCirEmPvcStatsEntry 21 } vbrVbrPvcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrVbrPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a channel connection" ::= { connectionStatistics 11 } vbrVbrPvcStatsEntry OBJECT-TYPE SYNTAX VbrVbrPvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { vbrVbrPvcStatsIfA, vbrVbrPvcStatsIfB } ::= { vbrVbrPvcStatsTable 1} VbrVbrPvcStatsEntry ::= SEQUENCE { vbrVbrPvcStatsIfA IntfIndex, vbrVbrPvcStatsIfB IntfIndex, vbrVbrPvcStatsCellsEncodedHiA Integer32, vbrVbrPvcStatsCellsEncodedLoA Integer32, vbrVbrPvcStatsCellsDecodedHiA Integer32, vbrVbrPvcStatsCellsDecodedLoA Integer32, vbrVbrPvcStatsCellsEncodedHiB Integer32, vbrVbrPvcStatsCellsEncodedLoB Integer32, vbrVbrPvcStatsCellsDecodedHiB Integer32, vbrVbrPvcStatsCellsDecodedLoB Integer32, vbrVbrPvcStatsTimer Integer32, vbrVbrPvcStatsOdometerCellsEncodedHiA Integer32, vbrVbrPvcStatsOdometerCellsEncodedLoA Integer32, vbrVbrPvcStatsOdometerCellsDecodedHiA Integer32, vbrVbrPvcStatsOdometerCellsDecodedLoA Integer32, vbrVbrPvcStatsOdometerCellsEncodedHiB Integer32, vbrVbrPvcStatsOdometerCellsEncodedLoB Integer32, vbrVbrPvcStatsOdometerCellsDecodedHiB Integer32, vbrVbrPvcStatsOdometerCellsDecodedLoB Integer32, vbrVbrPvcStatsOdometerTimer Integer32, vbrVbrPvcStatsOdometerReset INTEGER } vbrVbrPvcStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { vbrVbrPvcStatsEntry 1 } vbrVbrPvcStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side A" ::= { vbrVbrPvcStatsEntry 2 } vbrVbrPvcStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { vbrVbrPvcStatsEntry 4 } vbrVbrPvcStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { vbrVbrPvcStatsEntry 5 } vbrVbrPvcStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrVbrPvcStatsEntry 6 } vbrVbrPvcStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { vbrVbrPvcStatsEntry 7 } vbrVbrPvcStatsCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (High order portion) " ::= { vbrVbrPvcStatsEntry 9 } vbrVbrPvcStatsCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (Low order portion)" ::= { vbrVbrPvcStatsEntry 10 } vbrVbrPvcStatsCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (High order portion)" ::= { vbrVbrPvcStatsEntry 11 } vbrVbrPvcStatsCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (Low order portion)" ::= { vbrVbrPvcStatsEntry 12 } vbrVbrPvcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { vbrVbrPvcStatsEntry 13 } vbrVbrPvcStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { vbrVbrPvcStatsEntry 14 } vbrVbrPvcStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { vbrVbrPvcStatsEntry 15 } vbrVbrPvcStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrVbrPvcStatsEntry 16 } vbrVbrPvcStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { vbrVbrPvcStatsEntry 17 } vbrVbrPvcStatsOdometerCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (High order portion) " ::= { vbrVbrPvcStatsEntry 18 } vbrVbrPvcStatsOdometerCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B- (Low order portion) " ::= { vbrVbrPvcStatsEntry 19 } vbrVbrPvcStatsOdometerCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (High order portion)" ::= { vbrVbrPvcStatsEntry 20 } vbrVbrPvcStatsOdometerCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B- (Low order portion) " ::= { vbrVbrPvcStatsEntry 21 } vbrVbrPvcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { vbrVbrPvcStatsEntry 22 } vbrVbrPvcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { vbrVbrPvcStatsEntry 23 } bridgeBridgePvcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeBridgePvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of bridge-bridge PVC connection statistics" ::= { connectionStatistics 12 } bridgeBridgePvcStatsEntry OBJECT-TYPE SYNTAX BridgeBridgePvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of statistics attributes" INDEX { bridgeBridgePvcStatsIfA, bridgeBridgePvcStatsIfB } ::= { bridgeBridgePvcStatsTable 1} BridgeBridgePvcStatsEntry ::= SEQUENCE { bridgeBridgePvcStatsIfA IntfIndex, bridgeBridgePvcStatsIfB IntfIndex, bridgeBridgePvcStatsCellsEncodedHiA Integer32, bridgeBridgePvcStatsCellsEncodedLoA Integer32, bridgeBridgePvcStatsCellsDecodedHiA Integer32, bridgeBridgePvcStatsCellsDecodedLoA Integer32, bridgeBridgePvcStatsCellsEncodedHiB Integer32, bridgeBridgePvcStatsCellsEncodedLoB Integer32, bridgeBridgePvcStatsCellsDecodedHiB Integer32, bridgeBridgePvcStatsCellsDecodedLoB Integer32, bridgeBridgePvcStatsTimer Integer32, bridgeBridgePvcStatsOdometerCellsEncodedHiA Integer32, bridgeBridgePvcStatsOdometerCellsEncodedLoA Integer32, bridgeBridgePvcStatsOdometerCellsDecodedHiA Integer32, bridgeBridgePvcStatsOdometerCellsDecodedLoA Integer32, bridgeBridgePvcStatsOdometerCellsEncodedHiB Integer32, bridgeBridgePvcStatsOdometerCellsEncodedLoB Integer32, bridgeBridgePvcStatsOdometerCellsDecodedHiB Integer32, bridgeBridgePvcStatsOdometerCellsDecodedLoB Integer32, bridgeBridgePvcStatsOdometerTimer Integer32, bridgeBridgePvcStatsOdometerReset INTEGER } bridgeBridgePvcStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface index (SSPPCCC) on side A" ::= { bridgeBridgePvcStatsEntry 1 } bridgeBridgePvcStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { bridgeBridgePvcStatsEntry 2 } bridgeBridgePvcStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A - (High order portion )" ::= { bridgeBridgePvcStatsEntry 3 } bridgeBridgePvcStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells encoded on side A - ( Low order portion) " ::= { bridgeBridgePvcStatsEntry 4 } bridgeBridgePvcStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - ( High order portion)" ::= { bridgeBridgePvcStatsEntry 5 } bridgeBridgePvcStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (Low order portion) " ::= { bridgeBridgePvcStatsEntry 6 } bridgeBridgePvcStatsCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B - (High order portion ) " ::= { bridgeBridgePvcStatsEntry 7 } bridgeBridgePvcStatsCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B - (Low order portion ) " ::= { bridgeBridgePvcStatsEntry 8 } bridgeBridgePvcStatsCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B - (High order portion )" ::= { bridgeBridgePvcStatsEntry 9 } bridgeBridgePvcStatsCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side B -(Low order portion ) " ::= { bridgeBridgePvcStatsEntry 10 } bridgeBridgePvcStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { bridgeBridgePvcStatsEntry 11 } bridgeBridgePvcStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { bridgeBridgePvcStatsEntry 12 } bridgeBridgePvcStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells encoded on side A- (Low order portion)" ::= { bridgeBridgePvcStatsEntry 13 } bridgeBridgePvcStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { bridgeBridgePvcStatsEntry 14 } bridgeBridgePvcStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { bridgeBridgePvcStatsEntry 15 } bridgeBridgePvcStatsOdometerCellsEncodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B - (High order portion)" ::= { bridgeBridgePvcStatsEntry 16 } bridgeBridgePvcStatsOdometerCellsEncodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side B - (Low order portion)" ::= { bridgeBridgePvcStatsEntry 17 } bridgeBridgePvcStatsOdometerCellsDecodedHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells decoded on side B - (High order portion) " ::= { bridgeBridgePvcStatsEntry 18 } bridgeBridgePvcStatsOdometerCellsDecodedLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells decoded on side B - (Low order portion)" ::= { bridgeBridgePvcStatsEntry 19 } bridgeBridgePvcStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { bridgeBridgePvcStatsEntry 20 } bridgeBridgePvcStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { bridgeBridgePvcStatsEntry 21 } bridgeAtmPvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statisics" ::= { connectionStatistics 13 } bridgeAtmPvcVccStatsEntry OBJECT-TYPE SYNTAX BridgeAtmPvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the connection statistics table" INDEX { bridgeAtmPvcVccStatsIfA, bridgeAtmPvcVccStatsIfB, bridgeAtmPvcVccStatsVpiB, bridgeAtmPvcVccStatsVciB } ::= { bridgeAtmPvcVccStatsTable 1} BridgeAtmPvcVccStatsEntry ::= SEQUENCE { bridgeAtmPvcVccStatsIfA IntfIndex, bridgeAtmPvcVccStatsIfB IntfIndex, bridgeAtmPvcVccStatsVpiB INTEGER, bridgeAtmPvcVccStatsVciB INTEGER, bridgeAtmPvcVccStatsCellsEncodedHiA Integer32, bridgeAtmPvcVccStatsCellsEncodedLoA Integer32, bridgeAtmPvcVccStatsCellsDecodedHiA Integer32, bridgeAtmPvcVccStatsCellsDecodedLoA Integer32, bridgeAtmPvcVccStatsInCellCountHiB Integer32, bridgeAtmPvcVccStatsInCellCountLoB Integer32, bridgeAtmPvcVccStatsOutCellCountHiB Integer32, bridgeAtmPvcVccStatsOutCellCountLoB Integer32, bridgeAtmPvcVccStatsTimer Integer32, bridgeAtmPvcVccStatsOdometerCellsEncodedHiA Integer32, bridgeAtmPvcVccStatsOdometerCellsEncodedLoA Integer32, bridgeAtmPvcVccStatsOdometerCellsDecodedHiA Integer32, bridgeAtmPvcVccStatsOdometerCellsDecodedLoA Integer32, bridgeAtmPvcVccStatsInOdometerCellCountHiB Integer32, bridgeAtmPvcVccStatsInOdometerCellCountLoB Integer32, bridgeAtmPvcVccStatsOutOdometerCellCountHiB Integer32, bridgeAtmPvcVccStatsOutOdometerCellCountLoB Integer32, bridgeAtmPvcVccStatsOdometerTimer Integer32, bridgeAtmPvcVccStatsOdometerReset INTEGER, bridgeAtmPvcVccStatsOamAisTx Integer32, bridgeAtmPvcVccStatsOamAisRx Integer32, bridgeAtmPvcVccStatsOamRdiTx Integer32, bridgeAtmPvcVccStatsOamRdiRx Integer32, bridgeAtmPvcVccStatsCellsDroppedB Integer32, bridgeAtmPvcVccStatsCellsTaggedB Integer32 } bridgeAtmPvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface index (SSPPCCC) on side A" ::= { bridgeAtmPvcVccStatsEntry 1 } bridgeAtmPvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index (SSPPCCC) on side B" ::= { bridgeAtmPvcVccStatsEntry 2 } bridgeAtmPvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "vpi - side B " ::= { bridgeAtmPvcVccStatsEntry 3 } bridgeAtmPvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "vci - side B " ::= { bridgeAtmPvcVccStatsEntry 4 } bridgeAtmPvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells encoded on side A - (High order portion). " ::= { bridgeAtmPvcVccStatsEntry 5 } bridgeAtmPvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells encoded on side A - (Low order portion). " ::= { bridgeAtmPvcVccStatsEntry 6 } bridgeAtmPvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " number of cells decoded on side A - (High order portion). " ::= { bridgeAtmPvcVccStatsEntry 7 } bridgeAtmPvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " number of cells decoded on side A - (Low order portion). " ::= { bridgeAtmPvcVccStatsEntry 8 } bridgeAtmPvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 9 } bridgeAtmPvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 10 } bridgeAtmPvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 11 } bridgeAtmPvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 12 } bridgeAtmPvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { bridgeAtmPvcVccStatsEntry 13 } bridgeAtmPvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Cells encoded on side A- (High order portion)" ::= { bridgeAtmPvcVccStatsEntry 14 } bridgeAtmPvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { bridgeAtmPvcVccStatsEntry 15 } bridgeAtmPvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { bridgeAtmPvcVccStatsEntry 16 } bridgeAtmPvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { bridgeAtmPvcVccStatsEntry 17 } bridgeAtmPvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 18 } bridgeAtmPvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 19 } bridgeAtmPvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 20 } bridgeAtmPvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { bridgeAtmPvcVccStatsEntry 21 } bridgeAtmPvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { bridgeAtmPvcVccStatsEntry 22 } bridgeAtmPvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { bridgeAtmPvcVccStatsEntry 23 } bridgeAtmPvcVccStatsOamAisTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells transmitted." ::= { bridgeAtmPvcVccStatsEntry 24 } bridgeAtmPvcVccStatsOamAisRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AIS cells received." ::= { bridgeAtmPvcVccStatsEntry 25 } bridgeAtmPvcVccStatsOamRdiTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells transmitted." ::= { bridgeAtmPvcVccStatsEntry 26 } bridgeAtmPvcVccStatsOamRdiRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RDI cells received." ::= { bridgeAtmPvcVccStatsEntry 27 } bridgeAtmPvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { bridgeAtmPvcVccStatsEntry 28 } bridgeAtmPvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { bridgeAtmPvcVccStatsEntry 29 } cirEmAtmSpvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CirEmAtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a CES SPVC channel connection" ::= { connectionStatistics 14 } cirEmAtmSpvcVccStatsEntry OBJECT-TYPE SYNTAX CirEmAtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the CES SPVC connection statistics table" INDEX { cirEmAtmSpvcVccStatsIfA, cirEmAtmSpvcVccStatsIfB, cirEmAtmSpvcVccStatsVpiB, cirEmAtmSpvcVccStatsVciB } ::= { cirEmAtmSpvcVccStatsTable 1} CirEmAtmSpvcVccStatsEntry ::= SEQUENCE { cirEmAtmSpvcVccStatsIfA IntfIndex, cirEmAtmSpvcVccStatsIfB IntfIndex, cirEmAtmSpvcVccStatsVpiB INTEGER, cirEmAtmSpvcVccStatsVciB INTEGER, cirEmAtmSpvcVccStatsCellsEncodedHiA Integer32, cirEmAtmSpvcVccStatsCellsEncodedLoA Integer32, cirEmAtmSpvcVccStatsCellsDecodedHiA Integer32, cirEmAtmSpvcVccStatsCellsDecodedLoA Integer32, cirEmAtmSpvcVccStatsInCellCountHiB Integer32, cirEmAtmSpvcVccStatsInCellCountLoB Integer32, cirEmAtmSpvcVccStatsOutCellCountHiB Integer32, cirEmAtmSpvcVccStatsOutCellCountLoB Integer32, cirEmAtmSpvcVccStatsTimer Integer32, cirEmAtmSpvcVccStatsOdometerCellsEncodedHiA Integer32, cirEmAtmSpvcVccStatsOdometerCellsEncodedLoA Integer32, cirEmAtmSpvcVccStatsOdometerCellsDecodedHiA Integer32, cirEmAtmSpvcVccStatsOdometerCellsDecodedLoA Integer32, cirEmAtmSpvcVccStatsInOdometerCellCountHiB Integer32, cirEmAtmSpvcVccStatsInOdometerCellCountLoB Integer32, cirEmAtmSpvcVccStatsOutOdometerCellCountHiB Integer32, cirEmAtmSpvcVccStatsOutOdometerCellCountLoB Integer32, cirEmAtmSpvcVccStatsOdometerTimer Integer32, cirEmAtmSpvcVccStatsOdometerReset INTEGER, cirEmAtmSpvcVccStatsCellsDroppedB Integer32, cirEmAtmSpvcVccStatsCellsTaggedB Integer32 } cirEmAtmSpvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the circuit emulation side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmSpvcVccStatsEntry 1 } cirEmAtmSpvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cirEmAtmSpvcVccStatsEntry 2 } cirEmAtmSpvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { cirEmAtmSpvcVccStatsEntry 3 } cirEmAtmSpvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a circuit emulation-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { cirEmAtmSpvcVccStatsEntry 4 } cirEmAtmSpvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A - (High order portion )" ::= { cirEmAtmSpvcVccStatsEntry 5 } cirEmAtmSpvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A - ( Low order portion) " ::= { cirEmAtmSpvcVccStatsEntry 6 } cirEmAtmSpvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - ( High order portion) " ::= { cirEmAtmSpvcVccStatsEntry 7 } cirEmAtmSpvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (Low order portion) " ::= { cirEmAtmSpvcVccStatsEntry 8 } cirEmAtmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { cirEmAtmSpvcVccStatsEntry 9 } cirEmAtmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion) " ::= { cirEmAtmSpvcVccStatsEntry 10 } cirEmAtmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B - (High order portion)" ::= { cirEmAtmSpvcVccStatsEntry 11 } cirEmAtmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B - (Low order portion)" ::= { cirEmAtmSpvcVccStatsEntry 12 } cirEmAtmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since stats have been collecting" ::= { cirEmAtmSpvcVccStatsEntry 13 } cirEmAtmSpvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion) " ::= { cirEmAtmSpvcVccStatsEntry 14 } cirEmAtmSpvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion) " ::= { cirEmAtmSpvcVccStatsEntry 15 } cirEmAtmSpvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion) " ::= { cirEmAtmSpvcVccStatsEntry 16 } cirEmAtmSpvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion) " ::= { cirEmAtmSpvcVccStatsEntry 17 } cirEmAtmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmSpvcVccStatsEntry 18 } cirEmAtmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cirEmAtmSpvcVccStatsEntry 19 } cirEmAtmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmSpvcVccStatsEntry 20 } cirEmAtmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cirEmAtmSpvcVccStatsEntry 21 } cirEmAtmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { cirEmAtmSpvcVccStatsEntry 22 } cirEmAtmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { cirEmAtmSpvcVccStatsEntry 23 } cirEmAtmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { cirEmAtmSpvcVccStatsEntry 24 } cirEmAtmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { cirEmAtmSpvcVccStatsEntry 25 } vbrAtmSpvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VbrAtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a TE SPVC channel connection." ::= { connectionStatistics 15 } vbrAtmSpvcVccStatsEntry OBJECT-TYPE SYNTAX VbrAtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the TE SPVC connection statistics table." INDEX { vbrAtmSpvcVccStatsIfA, vbrAtmSpvcVccStatsIfB, vbrAtmSpvcVccStatsVpiB, vbrAtmSpvcVccStatsVciB } ::= { vbrAtmSpvcVccStatsTable 1} VbrAtmSpvcVccStatsEntry ::= SEQUENCE { vbrAtmSpvcVccStatsIfA IntfIndex, vbrAtmSpvcVccStatsIfB IntfIndex, vbrAtmSpvcVccStatsVpiB INTEGER, vbrAtmSpvcVccStatsVciB INTEGER, vbrAtmSpvcVccStatsCellsEncodedHiA Integer32, vbrAtmSpvcVccStatsCellsEncodedLoA Integer32, vbrAtmSpvcVccStatsCellsDecodedHiA Integer32, vbrAtmSpvcVccStatsCellsDecodedLoA Integer32, vbrAtmSpvcVccStatsInCellCountHiB Integer32, vbrAtmSpvcVccStatsInCellCountLoB Integer32, vbrAtmSpvcVccStatsOutCellCountHiB Integer32, vbrAtmSpvcVccStatsOutCellCountLoB Integer32, vbrAtmSpvcVccStatsTimer Integer32, vbrAtmSpvcVccStatsOdometerCellsEncodedHiA Integer32, vbrAtmSpvcVccStatsOdometerCellsEncodedLoA Integer32, vbrAtmSpvcVccStatsOdometerCellsDecodedHiA Integer32, vbrAtmSpvcVccStatsOdometerCellsDecodedLoA Integer32, vbrAtmSpvcVccStatsInOdometerCellCountHiB Integer32, vbrAtmSpvcVccStatsInOdometerCellCountLoB Integer32, vbrAtmSpvcVccStatsOutOdometerCellCountHiB Integer32, vbrAtmSpvcVccStatsOutOdometerCellCountLoB Integer32, vbrAtmSpvcVccStatsOdometerTimer Integer32, vbrAtmSpvcVccStatsOdometerReset INTEGER, vbrAtmSpvcVccStatsCellsDroppedB Integer32, vbrAtmSpvcVccStatsCellsTaggedB Integer32 } vbrAtmSpvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A, the variable bit rate side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcVccStatsEntry 1 } vbrAtmSpvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcVccStatsEntry 2 } vbrAtmSpvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095." ::= { vbrAtmSpvcVccStatsEntry 3 } vbrAtmSpvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535." ::= { vbrAtmSpvcVccStatsEntry 4 } vbrAtmSpvcVccStatsCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 5 } vbrAtmSpvcVccStatsCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ells encoded on side A - (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 6 } vbrAtmSpvcVccStatsCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 7 } vbrAtmSpvcVccStatsCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A - (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 8 } vbrAtmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 9} vbrAtmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 10 } vbrAtmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(High order portion)" ::= { vbrAtmSpvcVccStatsEntry 11 } vbrAtmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B - (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 12 } vbrAtmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { vbrAtmSpvcVccStatsEntry 13 } vbrAtmSpvcVccStatsOdometerCellsEncodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 14 } vbrAtmSpvcVccStatsOdometerCellsEncodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells encoded on side A- (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 15 } vbrAtmSpvcVccStatsOdometerCellsDecodedHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 16 } vbrAtmSpvcVccStatsOdometerCellsDecodedLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells decoded on side A- (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 17 } vbrAtmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { vbrAtmSpvcVccStatsEntry 18 } vbrAtmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 19 } vbrAtmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells transmitted on B -(High order portion)" ::= { vbrAtmSpvcVccStatsEntry 20 } vbrAtmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells transmitted on B -(Low order portion)" ::= { vbrAtmSpvcVccStatsEntry 21 } vbrAtmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { vbrAtmSpvcVccStatsEntry 22 } vbrAtmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { vbrAtmSpvcVccStatsEntry 23 } vbrAtmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { vbrAtmSpvcVccStatsEntry 24 } vbrAtmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { vbrAtmSpvcVccStatsEntry 25 } atmSpvcVccStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of statistics for a ATM SPVC channel connection" ::= { connectionStatistics 16 } atmSpvcVccStatsEntry OBJECT-TYPE SYNTAX AtmSpvcVccStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for the ATM SPVC connection statistics table" INDEX { atmSpvcVccStatsIfA, atmSpvcVccStatsVpiA, atmSpvcVccStatsVciA, atmSpvcVccStatsIfB, atmSpvcVccStatsVpiB, atmSpvcVccStatsVciB } ::= { atmSpvcVccStatsTable 1 } AtmSpvcVccStatsEntry ::= SEQUENCE { atmSpvcVccStatsIfA IntfIndex, atmSpvcVccStatsVpiA INTEGER, atmSpvcVccStatsVciA INTEGER, atmSpvcVccStatsIfB IntfIndex, atmSpvcVccStatsVpiB INTEGER, atmSpvcVccStatsVciB INTEGER, atmSpvcVccStatsInCellCountHiA Integer32, atmSpvcVccStatsInCellCountLoA Integer32, atmSpvcVccStatsOutCellCountHiA Integer32, atmSpvcVccStatsOutCellCountLoA Integer32, atmSpvcVccStatsInCellCountHiB Integer32, atmSpvcVccStatsInCellCountLoB Integer32, atmSpvcVccStatsOutCellCountHiB Integer32, atmSpvcVccStatsOutCellCountLoB Integer32, atmSpvcVccStatsTimer Integer32, atmSpvcVccStatsFrwdErrCrrctnRateA2B INTEGER, atmSpvcVccStatsFrwdErrCrrctnRateB2A INTEGER, atmSpvcVccStatsInOdometerCellCountHiA Integer32, atmSpvcVccStatsInOdometerCellCountLoA Integer32, atmSpvcVccStatsOutOdometerCellCountHiA Integer32, atmSpvcVccStatsOutOdometerCellCountLoA Integer32, atmSpvcVccStatsInOdometerCellCountHiB Integer32, atmSpvcVccStatsInOdometerCellCountLoB Integer32, atmSpvcVccStatsOutOdometerCellCountHiB Integer32, atmSpvcVccStatsOutOdometerCellCountLoB Integer32, atmSpvcVccStatsOdometerTimer Integer32, atmSpvcVccStatsOdometerReset INTEGER, atmSpvcVccStatsCellsDroppedA Integer32, atmSpvcVccStatsCellsTaggedA Integer32, atmSpvcVccStatsCellsDroppedB Integer32, atmSpvcVccStatsCellsTaggedB Integer32 } atmSpvcVccStatsIfA OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmSpvcVccStatsEntry 1 } atmSpvcVccStatsVpiA OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmSpvcVccStatsEntry 2 } atmSpvcVccStatsVciA OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side A of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmSpvcVccStatsEntry 3 } atmSpvcVccStatsIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side B of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { atmSpvcVccStatsEntry 4 } atmSpvcVccStatsVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 4095." ::= { atmSpvcVccStatsEntry 5 } atmSpvcVccStatsVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for side B of an ATM-to-ATM PVC VCC connection. Valid range is a number between 0 and 65535." ::= { atmSpvcVccStatsEntry 6 } atmSpvcVccStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (High order portion)" ::= { atmSpvcVccStatsEntry 7 } atmSpvcVccStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on A - (Low order portion) " ::= { atmSpvcVccStatsEntry 8 } atmSpvcVccStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(High order portion)" ::= { atmSpvcVccStatsEntry 9 } atmSpvcVccStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on A -(Low order portion)" ::= { atmSpvcVccStatsEntry 10 } atmSpvcVccStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (High order portion)" ::= { atmSpvcVccStatsEntry 11 } atmSpvcVccStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Cells received on B - (Low order portion) " ::= { atmSpvcVccStatsEntry 12 } atmSpvcVccStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(High order portion)" ::= { atmSpvcVccStatsEntry 13 } atmSpvcVccStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted on B -(Low order portion)" ::= { atmSpvcVccStatsEntry 14 } atmSpvcVccStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { atmSpvcVccStatsEntry 15 } atmSpvcVccStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmSpvcVccStatsEntry 16 } atmSpvcVccStatsFrwdErrCrrctnRateB2A OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmSpvcVccStatsEntry 17 } atmSpvcVccStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSpvcVccStatsEntry 18 } atmSpvcVccStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 19 } atmSpvcVccStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 20 } atmSpvcVccStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 21 } atmSpvcVccStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmSpvcVccStatsEntry 22 } atmSpvcVccStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 23 } atmSpvcVccStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 24 } atmSpvcVccStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { atmSpvcVccStatsEntry 25 } atmSpvcVccStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since odometer was reset." ::= { atmSpvcVccStatsEntry 26 } atmSpvcVccStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Odometer reset button." ::= { atmSpvcVccStatsEntry 27 } atmSpvcVccStatsCellsDroppedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of A" ::= { atmSpvcVccStatsEntry 28 } atmSpvcVccStatsCellsTaggedA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of A" ::= { atmSpvcVccStatsEntry 29 } atmSpvcVccStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { atmSpvcVccStatsEntry 30 } atmSpvcVccStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { atmSpvcVccStatsEntry 31 } -- IP over ATM Group ipAtmArpSrvConnType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of Arp Server connection" ::= { ipAtmGroup 1 } ipAtmIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Local IP Address" ::= { ipAtmGroup 2 } ipAtmIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Local IP Mask" ::= { ipAtmGroup 3 } atmArpTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP Table" ::= { ipAtmGroup 4 } atmArpEntry OBJECT-TYPE SYNTAX AtmArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP Table entry" INDEX { atmArpIpAddress } ::= { atmArpTable 1 } AtmArpEntry ::= SEQUENCE { atmArpIpAddress IpAddress, atmArpAtmAddress OCTET STRING, atmArpAddrType INTEGER, atmArpEntryState INTEGER, atmArpEntryRowStatus RowStatus } atmArpIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of the IP host described in APR table entry." ::= { atmArpEntry 1 } atmArpAtmAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ATM address of the IP host." ::= { atmArpEntry 2 } atmArpAddrType OBJECT-TYPE SYNTAX INTEGER { nsap(1), e164(2), e164nsap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of ATM address value of atmArp address." DEFVAL { nsap } ::= { atmArpEntry 3 } atmArpEntryState OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), unconnected(3), permanent(4), pendingAtmAddr(5), pendingIpAddr(6), pendingConnect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of this entry." DEFVAL { valid } ::= { atmArpEntry 4 } atmArpEntryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "RowStatus of this entry." ::= { atmArpEntry 5 } appIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AppIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Application IP Routing table." ::= { ipAtmGroup 5 } appIpRouteEntry OBJECT-TYPE SYNTAX AppIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A route to a particular destination." INDEX { appIpRouteDest, appIpRouteMask, appIpRouteMetric1 } ::= { appIpRouteTable 1 } AppIpRouteEntry ::= SEQUENCE { appIpRouteDest IpAddress, appIpRouteMask IpAddress, appIpRouteMetric1 INTEGER, appIpRouteNextHop IpAddress, appIpRouteState INTEGER } appIpRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is not valid route. " ::= { appIpRouteEntry 1 } appIpRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mask for Ip route, usefull only for SENS stack VxWorks" ::= { appIpRouteEntry 2 } appIpRouteMetric1 OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes appIpRouteProto value. If this metric is not used, its value should be set to 1." ::= { appIpRouteEntry 3 } appIpRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)" ::= { appIpRouteEntry 4 } appIpRouteState OBJECT-TYPE SYNTAX INTEGER { invalid(0), inuse(1), notinuse(2), error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of route" ::= { appIpRouteEntry 5 } -- Iisp Routing Group iispRouting iispCbrRoutTable OBJECT-TYPE SYNTAX SEQUENCE OF IispCbrRoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Routing Table" ::= { iispRouting 1 } iispCbrRoutEntry OBJECT-TYPE SYNTAX IispCbrRoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Table Entry" INDEX { iispCbrRoutLength, iispCbrRoutNsapAddr } ::= { iispCbrRoutTable 1 } IispCbrRoutEntry ::= SEQUENCE { iispCbrRoutLength Integer32, iispCbrRoutNsapAddr OCTET STRING, iispCbrRoutIfIndex IntfIndex, iispCbrRoutRowStatus RowStatus } iispCbrRoutLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "length in bits" ::= { iispCbrRoutEntry 1 } iispCbrRoutNsapAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "nsap address" ::= { iispCbrRoutEntry 2 } iispCbrRoutIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index - SSPPCCC" ::= { iispCbrRoutEntry 3 } iispCbrRoutRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { iispCbrRoutEntry 4 } iispVbrRoutTable OBJECT-TYPE SYNTAX SEQUENCE OF IispVbrRoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Routing Table" ::= { iispRouting 2 } iispVbrRoutEntry OBJECT-TYPE SYNTAX IispVbrRoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Table Entry" INDEX { iispVbrRoutLength, iispVbrRoutNsapAddr } ::= { iispVbrRoutTable 1 } IispVbrRoutEntry::= SEQUENCE { iispVbrRoutLength Integer32, iispVbrRoutNsapAddr OCTET STRING, iispVbrRoutIfIndex IntfIndex, iispVbrRoutRowStatus RowStatus } iispVbrRoutLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "length in bits" ::= { iispVbrRoutEntry 1 } iispVbrRoutNsapAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "nsap address" ::= { iispVbrRoutEntry 2 } iispVbrRoutIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index - SSPPCCC" ::= { iispVbrRoutEntry 3 } iispVbrRoutRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { iispVbrRoutEntry 4 } -- the following two tables are almost same as two iisp mib -- table above. They only diff at the number of the INDEX keys iispCbrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IispCbrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Routing Table" ::= { iispRouting 3 } iispCbrRouteEntry OBJECT-TYPE SYNTAX IispCbrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Route Entry" INDEX { iispCbrRouteLength, iispCbrRouteNsapAddr, iispCbrRouteIfIndex ,iispCbrRouteIfVuniId } ::= { iispCbrRouteTable 1 } IispCbrRouteEntry ::= SEQUENCE { iispCbrRouteLength Integer32, iispCbrRouteNsapAddr OCTET STRING, iispCbrRouteIfIndex IntfIndex, iispCbrRouteRowStatus RowStatus ,iispCbrRouteIfVuniId INTEGER, iispCbrRouteDest Integer32, iispCbrRouteType Integer32 } iispCbrRouteLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "length in bits" ::= { iispCbrRouteEntry 1 } iispCbrRouteNsapAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "nsap address" ::= { iispCbrRouteEntry 2 } iispCbrRouteIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index - SSPPCCC" ::= { iispCbrRouteEntry 3 } iispCbrRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { iispCbrRouteEntry 4 } iispCbrRouteIfVuniId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual UNI interface VUNI Id" DEFVAL { 0 } ::= { iispCbrRouteEntry 5 } -- The following 2 objects are defined according to the definition in the -- header file atmRoute.h under atmRoute/inc. For backward compatibility and -- minimal code changes, the values have been retained in dito iispCbrRouteType OBJECT-TYPE SYNTAX INTEGER { drmRouteTypeAny (0), drmRouteTypeAtm (1), drmRouteTypeIisp (2), drmRouteTypeIlmiUser (3), drmRouteTypeIsdn (11), drmRouteTypeCe (21), drmRouteTypeSs7 (31), drmRouteTypeFr (41), drmRouteTypeCasTrunk (51), drmRouteTypeEndPtAtm (132), drmRouteTypeEndPtCe (133), drmRouteTypeEndPtTe (134), drmRouteTypeEndPtIsdn (135), drmRouteTypeEndPtIp (136), drmRouteTypeEndPtFr (137) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Route, Categorisation of an Endpoint Route or an intermediate Route" DEFVAL { 0 } ::= { iispCbrRouteEntry 6 } iispCbrRouteDest OBJECT-TYPE SYNTAX INTEGER { drmRouteDestAny (0), drmRouteDestAtm (1), drmRouteDestIsdn (2), drmRouteDestCe (3), drmRouteDestSs7 (4), drmRouteDestFr (5), drmRouteDestAalIwf (6), drmRouteDestEndPtAtm (15), drmRouteDestEndPtCe (16), drmRouteDestEndPtTe (17), drmRouteDestEndPtIsdn (18), drmRouteTypeEndPtIp (19), drmRouteTypeEndPtFr (20), drmRouteTypeEndPtCas (21) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Destination, Categorisation of an Endpoint destination or an intermediate destination" DEFVAL { 0 } ::= { iispCbrRouteEntry 7 } iispVbrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IispVbrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Routing Table" ::= { iispRouting 4 } iispVbrRouteEntry OBJECT-TYPE SYNTAX IispVbrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IISP CBR Table Entry" INDEX { iispVbrRouteLength, iispVbrRouteNsapAddr, iispVbrRouteIfIndex , iispVbrRouteIfVuniId } ::= { iispVbrRouteTable 1 } IispVbrRouteEntry ::= SEQUENCE { iispVbrRouteLength Integer32, iispVbrRouteNsapAddr OCTET STRING, iispVbrRouteIfIndex IntfIndex, iispVbrRouteRowStatus RowStatus ,iispVbrRouteIfVuniId INTEGER, iispVbrRouteDest Integer32, iispVbrRouteType Integer32 } iispVbrRouteLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "length in bits" ::= { iispVbrRouteEntry 1 } iispVbrRouteNsapAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "nsap address" ::= { iispVbrRouteEntry 2 } iispVbrRouteIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "In most cases, it is the I/O Interface index - SSPPCCC. However, in case of ATM Trunking's Narrowband routing and Broadband routing, this is either the CAS trunk group ID, or the remote IWF ID, which are 1 to 3 digits decimal numbers" ::= { iispVbrRouteEntry 3 } iispVbrRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { iispVbrRouteEntry 4 } iispVbrRouteIfVuniId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual UNI interface VUNI Id" DEFVAL { 0 } ::= { iispVbrRouteEntry 5 } -- The following 2 objects are defined according to the definition in the -- header file atmRoute.h under atmRoute/inc. For backward compatibility and -- minimal code changes, the values have been retained in dito iispVbrRouteType OBJECT-TYPE SYNTAX INTEGER { drmRouteTypeAny (0), drmRouteTypeAtm (1), drmRouteTypeIisp (2), drmRouteTypeIlmiUser (3), drmRouteTypeIsdn (11), drmRouteTypeCe (21), drmRouteTypeSs7 (31), drmRouteTypeFr (41), drmRouteTypeCasTrunk (51), drmRouteTypeIwfTrunk (61), drmRouteTypeEndPtAtm (132), drmRouteTypeEndPtCe (133), drmRouteTypeEndPtTe (134), drmRouteTypeEndPtIsdn (135), drmRouteTypeEndPtIp (136), drmRouteTypeEndPtFr (137) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Route, Categorisation of an Endpoint Route or an intermediate Route" DEFVAL { 0 } ::= { iispVbrRouteEntry 6 } iispVbrRouteDest OBJECT-TYPE SYNTAX INTEGER { drmRouteDestAny (0), drmRouteDestAtm (1), drmRouteDestIsdn (2), drmRouteDestCe (3), drmRouteDestSs7 (4), drmRouteDestFr (5), drmRouteDestAalIwf (6), drmRouteDestEndPtAny (14), drmRouteDestEndPtAtm (15), drmRouteDestEndPtCe (16), drmRouteDestEndPtTe (17), drmRouteDestEndPtIsdn (18), drmRouteTypeEndPtIp (19), drmRouteTypeEndPtFr (20), drmRouteTypeEndPtCas (21), drmRouteTypeEndPtTrkIwf (22) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Destination, Categorisation of an Endpoint destination or an intermediate destination" DEFVAL { 0 } ::= { iispVbrRouteEntry 7 } -- Return Code Group returnCode pvcFailureReasonCode OBJECT-TYPE SYNTAX INTEGER { vpiVciUnavailableA2B(1), vpiVciUnavailableB2A(2), bandwidthUnavailableA2B(3), bandwidthUnavailableB2A(4), qosUnavailableA2B(5), qosUnavailableB2A(6), internalResourceUnavailable(7), cantUseSignalingChnlIgrsA2B(8), cantUseSignalingChnlEgrsA2B(9), cantUseSignalingChnlIgrsB2A(10), cantUseSignalingChnlEgrsB2A(11), cantUseManagementChnlIgrsA2B(12), cantUseManagementChnlEgrsA2B(13), cantUseManagementChnlIgrsB2A(14), cantUseManagementChnlEgrsB2A(15), vcLessThanVcMinIgrsA2B(16), vcLessThanVcMinEgrsA2B(17), vcLessThanVcMinIgrsB2A(18), vcLessThanVcMinEgrsB2A(19), vcGreaterThanVcMaxIgrsA2B(20), vcGreaterThanVcMaxEgrsA2B(21), vcGreaterThanVcMaxIgrsB2A(22), vcGreaterThanVcMaxEgrsB2A(23), vpLessThanVpMinIgrsA2B(24), vpLessThanVpMinEgrsA2B(25), vpLessThanVpMinIgrsB2A(26), vpLessThanVpMinEgrsB2A(27), vpGreaterThanVpMaxIgrsA2B(28), vpGreaterThanVpMaxEgrsA2B(29), vpGreaterThanVpMaxIgrsB2A(30), vpGreaterThanVpMaxEgrsB2A(31), vpGreaterThanVpMaxIispIgrsA2B(32), vpGreaterThanVpMaxIispEgrsA2B(33), vpGreaterThanVpMaxIispIgrsB2A(34), vpGreaterThanVpMaxIispEgrsB2A(35), rsvdChnlRangeIgrsA2B(36), rsvdChnlRangeEgrsA2B(37), rsvdChnlRangeIgrsB2A(38), rsvdChnlRangeEgrsB2A(39), internalSrvcTypeUnavailableA2B(40), internalSrvcTypeUnavailableB2A(41), unrecognizableBindTypeEgrsA2B(42), unrecognizableBindTypeEgrsB2A(43), callWithoutConnections(44), callDataStructuresUnavailable(45), cnctnDataStructuresUnavailable(46), nullTrafficParametersRejectedA2B(47), nullTrafficParametersRejectedB2A(48), vpiWithinSvcRangeIgrsA2B(49), vpiWithinSvcRangeEgrsA2B(50), vpiWithinSvcRangeIgrsB2A(51), vpiWithinSvcRangeEgrsB2A(52), vpiInReservedListA2B(53), vpiInReservedListB2A(54), vpiInPvcListA2B(55), vpiInPvcListB2A(56), vpiInReleasedListA2B(57), vpiInReleasedListB2A(58), vciIsNotNullInVpcIgrsA2B(59), vciIsNotNullInVpcEgrsA2B(60), vciIsNotNullInVpcIgrsB2A(61), vciIsNotNullInVpcEgrsB2A(62), vpiInVpcReservedListA2B(63), vpiInVpcReservedListB2A(64), vpiVciInReservedListA2B(65), vpiVciInReservedListB2A(66), vpiInVpcPvcListA2B(67), vpiInVpcPvcListB2A(68), vpiVciInPvcListA2B(69), vpiVciInPvcListB2A(70), vpiInVpcReleasedListA2B(71), vpiInVpcReleasedListB2A(72), vpiVciInReleasedListA2B(73), vpiVciInReleasedListB2A(74), illegalMulticaseIdA2B(75), illegalMulticaseIdB2A(76), unsupportedConnectionA2B(77), unsupportedConnectionB2A(78), connectionsUnavailableInModuleA2B(79), connectionsUnavailableInModuleB2A(80), cbrBandwidthUnavailableIgrsA2B(81), cbrBandwidthUnavailableEgrsA2B(82), cbrBandwidthUnavailableIgrsB2A(83), cbrBandwidthUnavailableEgrsB2A(84), vbrBandwidthUnavailableIgrsA2B(85), vbrBandwidthUnavailableEgrsA2B(86), vbrBandwidthUnavailableIgrsB2A(87), vbrBandwidthUnavailableEgrsB2A(88), vpiVciWithinSvcRangeIgrsA2B(89), vpiVciWithinSvcRangeEgrsA2B(90), vpiVciWithinSvcRangeIgrsB2A(91), vpiVciWithinSvcRangeEgrsB2A(92), multicastDataStructuresUnavailable(93), semaphoreTimeout(94), dlciFoundInReservedList(95), dlciFoundInPvcList(96), dlciFoundInReleasedList(97), invalidDlci(98), slotA-OutOfRange(99), portA-OutOfRange(100), channelA-OutOfRange(101), moduleA-Uninitialized(102), physicalPortA-Uninitialized(103), channelA-NotBound(104), moduleA-UnrecognizablePortType(105), slotB-OutOfRange(106), portB-OutOfRange(107), channelB-OutOfRange(108), moduleB-Uninitialized(109), physicalPortB-Uninitialized(110), channelB-NotBound(111), moduleB-UnrecognizablePortType(112), interfaceA-NotAtm(113), interfaceB-NotAtm(114), unrecognizableServiceTypeA2B(115), unrecognizableServiceTypeB2A(116), unrecognizableSarTypeA2B(117), unrecognizableSarTypeB2A(118), interfaceA-NotCircuitEmulation(119), interfaceB-NotCircuitEmulation(120), unrecognizableSilenceDetectionMode(121), unrecognizableEchoCancellationMode(122), unrecognizableVoiceCompressionMode(123), interfaceA-NotVbr(124), interfaceB-NotVbr(125), interfaceA-NotFrameRelay(126), interfaceB-NotFrameRelay(127), interfaceA-InHdlcPvcList(128), interfaceA-InHdlcReleasedList(129), interfaceA-InHdlcReservedList(130), interfaceA-InTerminalEmulationPvcList(131), interfaceA-InTerminalEmulationReleasedList(132), interfaceA-InTerminalEmulationReservedList(133), interfaceA-InCircuitEmulationPvcList(134), interfaceA-InCircuitEmulationReleasedList(135), interfaceA-InCircuitEmulationReservedList(136), notNullVpcInNoisyLinkA2BIgrs(137), notNullVpcInNoisyLinkA2BEgrs(138), invalidVccInNoisyLinkA2BIgrs(139), invalidVccInNoisyLinkA2BEgrs(140), unsupportedFrwdErrCorrectValueA2B(141), interfaceB-InHdlcPvcList(142), interfaceB-InHdlcReleasedList(143), interfaceB-InHdlcReservedList(144), interfaceB-InTerminalEmulationPvcList(145), interfaceB-InTerminalEmulationReleasedList(146), interfaceB-InTerminalEmulationReservedList(147), interfaceB-InCircuitEmulationPvcList(148), interfaceB-InCircuitEmulationReleasedList(149), interfaceB-InCircuitEmulationReservedList(150), notNullVpcInNoisyLinkB2AIgrs(151), notNullVpcInNoisyLinkB2AEgrs(152), invalidVccInNoisyLinkB2AIgrs(153), invalidVccInNoisyLinkB2AEgrs(154), unsupportedFrwdErrCorrectValueB2A(155), interfaceInUse(156), unsupportedFrwdErrCorrectSettings(157), unsupportedFlowSettings(158), frwdErrCorrectResourceInternalError(159), unsupportedConnection(160), ipDestAddrSubnetAInReservedList(161), ipDestAddrSubnetAInPvcList(162), ipDestAddrSubnetAInReleasedList(163), ipDestAddrSubnetBInReservedList(164), ipDestAddrSubnetBInPvcList(165), ipDestAddrSubnetBInReleasedList(166), notCpuIpInterfaceA(167), ipResourceUnavailable(168), fecAutoInSimplexNotValid(169), fecResourceUnavailable(170), notBridgeInterfaceA(171), notBridgeInterfaceB(172), invalidBridgePortA2B(173), invalidBridgePortB2A(174), interfaceAInBridgePvcList(175), interfaceBInBridgePvcList(176), interfaceAInBridgeReleasedList(177), interfaceBInBridgeReleasedList(178), interfaceAInBridgeReservedList(179), interfaceBInBridgeReservedList(180), invalidDlciA(181), invalidDlciB(182), unrecognizableServiceType(183), moduleAMcstNotSupported(184), moduleBMcstNotSupported(185), moduleAMultiPortMcstNotSupported(186), moduleBMultiPortMcstNotSupported(187), bcBeCirCannotBeNullA2B(188), bcBeCirCannotBeNullB2A(189), bcBeOrCirValTooHiA2B(190), bcBeOrCirValTooHiB2A(191), bcNotValidA2B(192), bcNotValidB2A(193), beNotValidA2B(194), beNotValidB2A(195), bcOrCirNotValidA2B(196), bcOrCirNotValidB2A(197), iWF-NotSupportedModuleA(198), iWF-NotSupportedModuleB(199), invalidMaxFrSizeA2B(200), invalidMaxFrSizeB2A(201), invalidSARType(202), unrecognizableSilenceDetectionModeA2B(203), unrecognizableEchoCancellationModeA2B(204), unrecognizableVoiceCompressionModeA2B(205), unrecognizableCallingToneDetectionA2B(206), unrecognizableCodingTranslationA2B(207), unrecognizableSilenceDetectionModeB2A(208), unrecognizableEchoCancellationModeB2A(209), unrecognizableVoiceCompressionModeB2A(210), unrecognizableCallingToneDetectionB2A(211), unrecognizableCodingTranslationB2A(212), dspUnsupportedForMultiCastConns(213), dspResourceUnavailable(214), destOrSrcCannotBeDSPCard(215), internalDSPResourceError(216), echoCancellationOnlySupportedForDuplex(217), cirEmCirEm-ThruPutMismatch(218), vi-Cannot-Be-0(219), vi-OOR(220), vi-Mod-Limit-Exceeded(221), vi-Resource-Unavail(222), vi-Already-Exists(223), vi-Does-Not-Exist(224), vi-0-Non-Ubr-Conn-Not-Supp(225), vi-OS-Cannot-Be-0(226), vi-OS-OOR(227), vi-CellRate-Too-Lo(228), vi-CellRate-Too-Hi(229), intf-CBR-CellRate-Exceeded(230), intf-VBR-CellRate-Exceeded(231), vi-Conn-CellRate-Exceeded(232), vi-Not-Enabled(233), vi-Should-Be-0(234), vi-OOR-A(235), vi-OOR-B(236), vi-0-Non-Ubr-Conn-Not-SuppA2B(237), vi-0-Non-Ubr-Conn-Not-SuppB2A(238), vi-Should-Be-0-A(239), vi-Should-Be-0-B(240), vi-Cbr-Bw-Unavailable-Egrs(241), vi-Cbr-Bw-Unavailable-Egrs-A(242), vi-Cbr-Bw-Unavailable-Egrs-B(243), vi-Vbr-Bw-Unavailable-Egrs(244), vi-Vbr-Bw-Unavailable-Egrs-A(245), vi-Vbr-Bw-Unavailable-Egrs-B(246), vi-Not-Enabled-A(247), vi-Not-Enabled-B(248), pcrLessThanScr(249), cnfrmTypeNotValidA2B(250), cnfrmTypeNotValidB2A(251), cnfrmType-ServiceType-Mismatch-A2B(252), cnfrmType-ServiceType-Mismatch-B2A(253), vuni-Should-Be-0(254), vuni-Not-Enabled(255), vuni-OOR(256), vuni-Already-Exists(257), vuni-Does-Not-Exist(258), vuni-Does-Not-Match-vi(259), vuni-Should-Be-0-A(260), vuni-Not-Enabled-A(261), vuni-OOR-A(262), vuni-Already-Exists-A(263), vuni-Does-Not-Exist-A(264), vuni-Does-Not-Match-vi-A(265), vuni-Should-Be-0-B(266), vuni-Not-Enabled-B(267), vuni-OOR-B(268), vuni-Already-Exists-B(269), vuni-Does-Not-Exist-B(270), vuni-Does-Not-Match-vi-B(271), vuni-Vpi-OOR(272), vuni-Vpi-OOR-A(273), vuni-Vpi-OOR-B(274), stdAal2TrunkResourceUnavailable(275), stdAal2Dsp2ResourceUnavailable(276), slotStdAal2ResourceUavailable(277), stdAal2CIDAlreadyInUse(278), stdAal2TrunkBWUavailableEgrs(279), stdAal2TrunkBWUavailableIgrs(280), stdAal2CIDInRsvRange(281), stdAal2TrunkNotSetup(282), aal2CIDOutOfRange(283), dhpvcSwitchOver-PrimToBkup(284), dhpvcSwitchOver-PrimToNone(285), dhpvcSwitchOver-NoneToPrim(286), dhpvcSwitchOver-NoneToBkup(287), dhpvcSwitchOver-BkupToNone(288), dhpvcSwitchOver-BkupToPrim(289), dhpvcState-Prim-Pass-Fail-Bkup-Act-NoFail(290), dhpvcState-Prim-Pass-NoFail-Bkup-Act-NoFail(291), dhpvcState-Prim-Act-NoFail-Bkup-Pass-Fail(292), dhpvcState-Prim-Act-NoFail-Bkup-Pass-NoFail(293), pcrGreaterThanLinkSpeedIngrA2B(294), pcrGreaterThanLinkSpeedIngrB2A(295), pcrGreaterThanLinkSpeedEgrA2B(296), pcrGreaterThanLinkSpeedEgrB2A(297), aal2CuTimerOutOfRange(298), unrecognizableDigitCollectTypeA2B(299), unrecognizableDigitCollectTypeB2A(300), queueTypeSarTypeMismatchA2B(301), queueTypeSarTypeMismatchB2A(302), pcrLessThanOrEqualToMcrA2B(303), pcrLessThanOrEqualToMcrB2A(304) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason why an ATM PVC connection request failed. aal2CuTimerOutOfRange(298): this error code is generated when the aal2CuTimer value is out of range and the valid reanges is 0 to 8 (0 - 40 msec of delay). unrecognizableDigitCollectTypeA2B(299): unrecognizable digital tone set in connection A2B direction. unrecognizableDigitCollectTypeB2A(300): unrecognizable digital tone set in connection B2A direction. " ::= { returnCode 1 } interfaceIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { returnCode 2 } interfaceType OBJECT-TYPE SYNTAX INTEGER { atmUni3-0(1), atmUni3-1(2), iispUser(3), iispNetwork(4), circuitEmulation(5), frameRelayUni(6), pri-isdn-user(7), pri-isdn-network(8), terminalEmulation(9), dsp(10), hdlcPassThrough(11), bridge(12), routing(13), dbCirEm(14), frameRelayNni(15), dsp2(16), atmIma(17), atmPnni1-0(18), atmUni4-0(19), atmVnnUni3-1(20), casTrunkLine(21), toneAnnce(22), gr303(23) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interface type used for identification in traps. A specific interface is associated with each number. atmUni3-0(1) ATM User Network Interface version 3.0 atmUni3-1(2) ATM User Network Interface version 3.1 iispUser(3) Interim Inter Switch Protocol User Side iispNetwork(4) Interim Inter Switch Protocol Network Side circuitEmulation(5) ATM Circuit Emulation frameRelayUni(6) Frame Relay User Network Interface pri-isdn-user(7) Integrated Services Digital Network Primary Rate Interface User Interface pri-isdn-network(8) Integrated Services Digital Network Primary Rate Interface Network Interface terminalEmulation(9) Terminal Emulation dsp(10) DSP hdlcPassThrough(11) High Level Data Link Control Pass Through Interface bridge(12) Ethernet Bridge routing(13) Ethernet Routing dbCirEm(14) Dynamic Bandwidth Circuit Emulation frameRelayNni(15) Frame Relay Network Network Interface dsp2(16) DSP2 atmIma(17) ATM Inverse Multiplexing over ATM (IMA) atmPnni1-0(18) ATM Private Network Network Interface Version 1.0 atmUni4-0(19) ATM User Network Interface Version 4.0 atmVnnUni3-1(20) ATM Virtual Network Navigator User Network Interface Version 3.1 casTrunkLine(21) Channel Associated Signaling Trunk Line Interface toneAnnce(22) Tone Announcement Interface gr303(23) GR303" ::= { returnCode 3 } interfaceFailureReasonCode OBJECT-TYPE SYNTAX INTEGER { interfaceInService(1), interfaceNotNew(2), interfaceExists(3), bridgeGroupActive(4), signalingNotEnabled(5), firmwareOutOfDate(6), t1SigEnableInterfaceNotSupported(7), ts16ForData(8), dbcesConfigured(9), signalingEnabled(10), channelizationEnabled(15), unstructuredCEConfigured(16), firmwareOutOfDate-ts16CAS-unsupported(17), firmwareOutOfDate-interfaceType-unsupported(18), firmwareOutOfDate-ts16-unsupported(19), invalidPortMap(20), otherInterfacesExistOnThisPort(21), intfInIMAgroup(22), errorCTC-portTxClkSrc-notLocal(23), different-LoopbackConfig-on-Ports(24), imaGChanNeTxClkMode-unsupported(25), intfChange-Disallowed-on-APS-ProtectionPort(26), intferfaceCurrentlyNotSupported(27), failure-at-call-handler(28), unstructuredCE-payloadloop(29), channelConfigModeNotConforming(30), usageOfReservedTimeSlot(31), virtualIntf-and-AtmSignaling-bothCannotBeEnabled(32), virtualUni-and-AtmSignaling-bothCannotBeEnabled(33), virtualUni-notSupported(34), atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled(35), virtualInterface-notSupported(36), card-doesNotSupport-UPC(37), atmUni-SvcVpiVci-RangeCheck-Failure(38), atmUni-SigVpiVci-Within-Svc-Range(39), atmUni-Ilmi-Svc-Sig-VpiVci-Clash(40), virtualUNI-VpiNotAvailable(41), virtualUNI-InvalidVUNIId(42), intfNotSupported-with-ds1LineType-d4(43), intfNotSupported-with-ds1LineCoding-ami(44), onlyCEsupported-with-msBitStuffing-enabled(45), vISuppConnTrafficShapingMutuallyExclusive(46), tS16onPortNotCAS(47), channelizationDisabled(48), primaryDS1InterfaceNotConfigured(49), primaryTMCChanNotConfigured(50), primaryTMCIntfAlreadyConfiguredInAnotherIg(51), primaryTMCIntfCantBeChanged(52), primaryEOCChanNotConfigured(53), primaryEOCIntfAlreadyConfiguredInAnotherIg(54), primaryTMC-EOCIntfShouldBeSame(55), primaryEOCIntfCantBeChanged(56), primaryTMC-BackupTMCIntfCantBeSame(57), backupDS1InterfaceNotConfigured(58), backupTMCChanNotConfigured(59), backupTMCIntfAlreadyConfiguredInAnotherIg(60), backupTMCIntfCantBeChanged(61), primaryEOC-BackupEOCIntfCantBeSame(62), backupEOCChanNotConfigured(63), backupEOCIntfAlreadyConfiguredInAnotherIg(64), backupTMC-EOCIntfShouldBeSame(65), backupEOCIntfCantBeChanged(66), newBWBelowCurrentAllocated(67), newBWBelowCurrentAllocated-SvcsBeingDeleted(68), newBWBelowCurrentAllocated-DeletePvcs(69), newBWAboveCurrentAllocated(70), primaryInactive-or-SecondaryActive-In-IntfProtTable(71), onlyCEsupported-with-msLOSDetection-enabled(72), nonMuxNotAllowed-with-FaxRelay(73), invalid-DSPmode-and-AALmode-combination(74), noBandwidth-For-SignalingConns(75) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of cause for failure in changing the status of an interface. interfaceInService(1) Most, if not all, modifications require that the interface be out of service. interfaceNotNew(2) Some modifications require that the interface must never have been in service. interfaceExists(3) Some modifications, such as setting the interface type, require that no interface exists. (type must be unconfigured). bridgeGroupActive(4) For setting the bridgeDomainNumber in bridge or router interfaces. to add an interface to a bridgeGroup, the bridgeGroup must be in service. signalingNotEnabled(5) For this interface to be created, signaling must be enabled. firmwareOutOfDate(6) The firmware for the i/o card does not work with this interface. t1SigEnableInterfaceNotSupported(7) The interface is not supported if T1 signaling is enabled ts16ForData(8) ts16 has been set for passing data and the user attempts to turn on signaling. dbcesConfigured(9) Signaling cannot be disabled because this interface is configured as dbces. signalingEnabled(10) Signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS. cmCardTypeNotSupported(11) CM_NET interface is only supported by DS3 DS1 OC3 and SUPER_DS1 cards cmMultipleIntfNotSupported(12) only one interface can be configured as CM_NET cmIntfInService(13) CM_NET interface is in-service cmInterfaceConfigured(14) CM_NET interface is configured channelizationEnabled(15) A port can not be channelized in order to support unstructured CE. unstructuredCEConfigured(16) A port which has been channelized can not be configured to support unstructured CE. firmwareOutOfDate-ts16CAS-unsupported(17) ts16CAS is not supported by the firmware firmwareOutOfDate-interfaceType-unsupported(18) interface type is not supported by the firmware firmwareOutOfDate-ts16-unsupported(19) ts16 is not supported by the firmware invalidPortMap(20) invalid port map otherInterfacesExistOnThisPort(21) ISDN interface needs all 24 channels on the port. If any of the channels on that interface are already configured, the ISDN interface can not be defined on that port. intfInIMAgroup(22) chanId bit in portMap is 1 errorCTC-portTxClkSrc-notLocal(23) if imaGrpChannelNeTxClkMode is set to ctc then all ports should have the transmitClockSource as localTiming different-LoopbackConfig-on-Ports(24) all physical ports included in the portMap must have the same loopback configuration imaGChanNeTxClkMode-unsupported(25) ima group channel near-end Tx clock mode is not supported intfChange-Disallowed-on-APS-ProtectionPort(26) an interface cannot be manipulated via protection port in an APS setup intferfaceCurrentlyNotSupported(27) the interface type is not support currently failure-at-call-handler(28) interface creation failure due to call handler unstructuredCE-payloadloop(29) Unstructured CE should not have payload loopback as a loop back option channelConfigModeNotConforming(30) There was a limitation on the channel mode of DSP_2D card: if there is a channel is already inService, all the channel mode of configured channels must be the same as that of the channel inService; all the channel mode of unconfigured channels can only be configured the same as that of the channel inService. usageOfReservedTimeSlot(31) for HD_E1, do not allow any configuration to be SET on channel number 1 or 17 (base 1) or chan 0 or 16 (base 0). virtualIntf-and-AtmSignaling-bothCannotBeEnabled(32) vitual interface and signalling cannot both be enabled at the same time virtualUni-and-AtmSignaling-bothCannotBeEnabled(33) vitual UNI and signalling cannot both be enabled at the same time virtualUni-notSupported(34) virtual UNI is not supported atmUni-UbrLoadBalSupp-cannotBeEnabled-whenSignalingDisabled(35) ubr load balancing cannot be enabled when signaling is disabled virtualInterface-notSupported(36) virtual interface support only allowed on APS type of cards card-doesNotSupport-UPC(37) only some cardTypes support UPC atmUni-SvcVpiVci-RangeCheck-Failure(38) Do range check provided atmSignaling is enabled vciMinSvc <= vciMaxSvc and vpiMinSvc <= vpiMaxSvc atmUni-SigVpiVci-Within-Svc-Range(39) atmUni{Vpi,Vci}Sig should not be within svc range atmUni-Ilmi-Svc-Sig-VpiVci-Clash(40) if IlmiProtocol status and atmUniSignaling are both enabled then the Ilmi Vpi/Vci should not fall in the Svc range and should not be equal to signaling vpi/vci virtualUNI-VpiNotAvailable(41) vpi is not available for the virtual UNI virtualUNI-InvalidVUNIId(42) vitural UNI Index is invalid intfNotSupported-with-ds1LineType-d4(43) if dsx1LineType is DSX1_D4 channel, interface type can't be atmIma intfNotSupported-with-ds1LineCoding-ami(44) if dsx1LineCoding is DSX1_AMI channel interface type can't be atmIma onlyCEsupported-with-msBitStuffing-enabled(45) if msBitStuffing is enabled only interface type circuit emulation is supported vISuppConnTrafficShapingMutuallyExclusive(46) The VI support flag and Traffic Shaping flag are mutually exclusive tS16onPortNotCAS(47) must have cas on port for channel to have cas trunk line interface channelizationDisabled(48) should have channelization enabled to have cas trunk line primaryDS1InterfaceNotConfigured(49) primary DS1 interface is not configured primaryTMCChanNotConfigured(50) primary timeslot management channel is not configured primaryTMCIntfAlreadyConfiguredInAnotherIg(51) primary timeslot management channel interface is already configured in another interface group primaryTMCIntfCantBeChanged(52) primary timeslot management channel interfance can't be changed primaryEOCChanNotConfigured(53) primary embeded operation channel is not configured primaryEOCIntfAlreadyConfiguredInAnotherIg(54) primary embeded operation channel interface is already configured in another interface group primaryTMC-EOCIntfShouldBeSame(55) primary timeslot management channel and embeded operation channel interfaces should be the same primaryEOCIntfCantBeChanged(56) primary embeded operation channel inteface can't be changed primaryTMC-BackupTMCIntfCantBeSame(57) primary and backup timeslot management channel interfaces can't be the same backupDS1InterfaceNotConfigured(58) backup DS1 interface is not configured backupTMCChanNotConfigured(59) backup timeslot management channel is not configured backupTMCIntfAlreadyConfiguredInAnotherIg(60) backup timeslot management channel interface is already configured in another interface group backupTMCIntfCantBeChanged(61) backup timeslot management channel interfance can't be changed primaryEOC-BackupEOCIntfCantBeSame(62) primary and backup embeded operation channel interfaces can't be the same backupEOCChanNotConfigured(63) backup embeded operation channel is not configured backupEOCIntfAlreadyConfiguredInAnotherIg(64) backup embeded operation channel interface is already configured in another interface group backupTMC-EOCIntfShouldBeSame(65) backup timeslot management channel and embeded operation channel interfaces should be the same backupEOCIntfCantBeChanged(66) backup embeded operation channel inteface can't be changed newBWBelowCurrentAllocated(67) new bandwidth is below the current allocated bandwidth newBWBelowCurrentAllocated-SvcsBeingDeleted(68) new bandwidth is below the current allocated bandwidth svc is being deleted newBWBelowCurrentAllocated-DeletePvcs(69) new bandwidth is below the current allocated bandwidth delete pvc newBWAboveCurrentAllocated(70) new bandwidth is above the current allocated bandwidth primaryInactive-or-SecondaryActive-In-IntfProtTable(71) an interface can't be deleted if it is in interface protection group which is primary/inactive or secondry/active onlyCEsupported-with-msLOSDetection-enabled(72) if msLOSDetection is enabled, only interface type circuit emulation is supported nonMuxNotAllowed-with-FaxRelay(73) DSP2 cards: if channelMode is CFG_DSP2_FAX_RELAY, aalMode can't be D_dsp2AalMode_aal2_non_multiplexed, invalid-DSPmode-and-AALmode-combination(74) DSP2 cards: such DSP mode and AAL mode combination is not allowed noBandwidth-For-SignalingConns(75) no bandwidth for signal connections" ::= { returnCode 4 } powerSupplyReasonCode OBJECT-TYPE SYNTAX INTEGER { overload(1), overloadCleared(2), plus5vFailed(3), plus5vCleared(4), plus120vFailed(5), plus120vCleared(6), minus48vFailed(7), minus48vCleared(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification for change in status of a power supply. overload(1) overload overloadCleared(2) overload cleared plus5vFailed(3) +5V power supply failed plus5vCleared(4) +5V power supply cleared plus120vFailed(5) +120V power supply failed plus120vCleared(6) +120V power supply cleared minus48vFailed(7) -48V power supply failed minus48vCleared(8) -48V power supply failed " ::= { returnCode 5 } portId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and PP is the port number." ::= { returnCode 6 } lineStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit map of the status of a line connected to a port." ::= { returnCode 7 } firmwareDownloadReasonCode OBJECT-TYPE SYNTAX INTEGER { cardInService(1), errorInFile(2), otherFailure(3), wrongCardSubType(4), driverUnavailable(5), driverInvalidHeaderChecksum(6), driverInvalidRecordChecksum(7), requestReplyTimeout(8), completeReplyTimeout(9), mapFileCorrupted(10), mapFileUnavailable(11), mapFileInvalidChecksum(12), mapFileNameImproper(13), cfgFileCorrupted(14), cfgFileUnavailable(15), cfgFileInvalidChecksum(16), wrongCardType(17), removeCardBeforeFinish(18), ioUnsupported(19) } MAX-ACCESS read-only STATUS current DESCRIPTION "The suspected reasons of why a firmware download would fail." ::= { returnCode 8 } remoteRebootReasonCode OBJECT-TYPE SYNTAX INTEGER { ioCard1Reboot-OK(1), ioCard2Reboot-OK(2), ioCard3Reboot-OK(3), ioCard4Reboot-OK(4), ioCard5Reboot-OK(5), ioCard6Reboot-OK(6), ioCard7Reboot-OK(7), ioCard8Reboot-OK(8), ioCard9Reboot-OK(9), ioCard10Reboot-OK(10), ioCard11Reboot-OK(11), ioCard12Reboot-OK(12), ioCard13Reboot-OK(13), ioCard14Reboot-OK(14), ioCard15Reboot-OK(15), ioCard16Reboot-OK(16), ioCard1Reboot-NoCardInSlot(17), ioCard2Reboot-NoCardInSlot(18), ioCard3Reboot-NoCardInSlot(19), ioCard4Reboot-NoCardInSlot(20), ioCard5Reboot-NoCardInSlot(21), ioCard6Reboot-NoCardInSlot(22), ioCard7Reboot-NoCardInSlot(23), ioCard8Reboot-NoCardInSlot(24), ioCard9Reboot-NoCardInSlot(25), ioCard10Reboot-NoCardInSlot(26), ioCard11Reboot-NoCardInSlot(27), ioCard12Reboot-NoCardInSlot(28), ioCard13Reboot-NoCardInSlot(29), ioCard14Reboot-NoCardInSlot(30), ioCard15Reboot-NoCardInSlot(31), ioCard16Reboot-NoCardInSlot(32), allIOCardReboot-OK(33), allIOCardReboot-NoIOCards(34), chassisReboot-Proceeding(35), backupCpuReboot-Proceeding(36), backupCpuReboot-NoBackup(37), primaryCpuReboot-Proceeding(38), primaryCpuSwitchover-Proceeding(39), primaryCpuSwitchover-NoBackup(40), chassisReboot-Fail-VersionControlInProgress(41), backupCpuReboot-Fail-VersionControlInProgress(42), primaryCpuReboot-Fail-VersionControlInProgress(43), primaryCpuSwitchover-Fail-VersionControlInProgress(44), primaryCpuSwitchover-Fail-BkCPUDataBaseNotNew(45), primaryCpuSwitchover-Fail-BkCPUBuildNotGood(46), primaryCpuSwitchover-Fail-BkCPU-NotReady(47) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a remote reboot request." ::= { returnCode 9 } saveConfigurationReasonCode OBJECT-TYPE SYNTAX INTEGER { equipment-OK(1), equipment-Fail-VersionControlInProgress(2), equipment-Fail(3), connections-OK(4), connections-Fail-VersionControlInProgress(5), connections-Fail(6), routing-OK(7), routing-Fail-VersionControlInProgress(8), routing-Fail(9), all-OK(10), all-Fail-VersionControlInProgress(11), all-Fail(12), fileTransferFailed(13), fileTransferCompleted(14), unSupportedOption(15), fail-backupCpuInitializationInProgress(16), expect2ndCPURebootAfterSave(17), expect2ndCPUCardFailedOrRemoved(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a save configuration request. equipment-OK(1) - Save of equipment configuration completed. equipment-Fail-VersionControlInProgress(2) - Save of equipment configuration failed due to ongoing version control operation. equipment-Fail(3) - Save of equipment configuration failed. connections-OK(4) - Save of connection configuration completed. connections-Fail-VersionControlInProgress(5) - - Save of connection configuration failed due to ongoing version control operation. connections-Fail(6) - Save of connection configuration failed. routing-OK(7) - Save of routing configuration completed. routing-Fail-VersionControlInProgress(8) - - Save of routing configuration failed due to ongoing version control operation. routing-Fail(9) - Save of routing configuration failed. all-OK(10) - Saving of all configurations completed. all-Fail-VersionControlInProgress(11) - - Saving of all configurations failed due to ongoing version control operation. all-Fail(12) - Saving of all configurations failed. fileTransferFailed(13) - Saving of configurations to secondary CPU failed. fileTransferCompleted(14) - Saving of configurations to secondary CPU completed. unSupportedOption(15) - Unsupported save option received. fail-backupCpuInitializationInProgress(16) - - Save operation failed due to ongoing secondary cpu initialization. expect2ndCPURebootAfterSave(17) - - Notification to expect reboot of secondary CPU after a save operation. expect2ndCPUCardFailedOrRemoved(18) - Notification to expect trap indicating removal/failure of secondary CPU after a save operation. " ::= { returnCode 10 } versionConfigurationReasonCode OBJECT-TYPE SYNTAX INTEGER { upgrade-Start(1), upgrade-Completed(2), upgrade-Fail(3), downgrade-Start(4), downgrade-Completed(5), downgrade-Fail(6), upgrade-Fail-NoVersion(7), upgrade-Fail-VersionControlInProgress(8), downgrade-Fail-NoVersion(9), downgrade-Fail-VersionControlInProgress(10), upgrade-InProgress(11), downgrade-InProgress(12), upgrade-sanityCheck-InProgress(13), downgrade-sanityCheck-InProgress(14), upgrade-sanityCheck-Completed(15), downgrade-sanityCheck-Completed(16), upgrade-Fail-SanityCheckFail(17), downgrade-Fail-SanityCheckFail(18), upgrade-Fail-BkCPUFailedToRespond(19), downgrade-Fail-BkCPUFailedToRespond(20), upgrade-Fail-UserAbort(21), downgrade-Fail-UserAbort(22), synch-Start(23), synch-InProgress(24), synch-Completed(25), synch-Fail(26), synch-Fail-NoBkCPU(27), synch-Fail-SameVersion(28), synch-Fail-FileCRCFailed(29), synch-Fail-VersionControlInProgress(30), synch-Fail-UserAbort(31), synch-Fail-SanityCheckFail(32), synch-Fail-BkCPUFailedToRespond(33), synch-sanityCheck-InProgress(34), synch-sanityCheck-Completed(35), failedToAbort(36) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated status and results of version changing. upgrade-Start(1) upgrade starts upgrade-Completed(2) upgrade completed upgrade-Fail(3) upgrade failed downgrade-Start(4) downgrade starts downgrade-Completed(5) downgrade completed downgrade-Fail(6) downgrade failed upgrade-Fail-NoVersion(7) upgrade failed, no version upgrade-Fail-VersionControlInProgress(8) upgrade failed, version control is in progress downgrade-Fail-NoVersion(9) downgrade failed, no version downgrade-Fail-VersionControlInProgress(10) downgrade failed, version control is in progress upgrade-InProgress(11) upgrade is in progress downgrade-InProgress(12)downgrade is in progress upgrade-sanityCheck-InProgress(13) upgrade sanity check is in progress downgrade-sanityCheck-InProgress(14) downgrade sanity check is in progress upgrade-sanityCheck-Completed(15), upgrade sanity check is completed downgrade-sanityCheck-Completed(16), downgrade sanity check is completed upgrade-Fail-SanityCheckFail(17) upgrade failed due to sanity check failure downgrade-Fail-SanityCheckFail(18) downgrade failed due to sanity check failure upgrade-Fail-BkCPUFailedToRespond(19) upgrade failed since backup CPU failed to respond downgrade-Fail-BkCPUFailedToRespond(20) downgrade failed since backup CPU failed to respond upgrade-Fail-UserAbort(21) upgrade failed since user aborted downgrade-Fail-UserAbort(22) downgrade failed since user aborted synch-Start(23) synchronization starts synch-InProgress(24) synchronization is in progress synch-Completed(25) synchronization is completed synch-Fail(26) synchronization failed synch-Fail-NoBkCPU(27) synchronization failed since no backup CPU synch-Fail-SameVersion(28) synchronization failed due to the same version synch-Fail-FileCRCFailed(29) synchronization failed due to file CRC failure synch-Fail-VersionControlInProgress(30) synchronization failed since version control is in progress synch-Fail-UserAbort(31) synchronization failed since user aborted synch-Fail-SanityCheckFail(32) synchronization failed due to sanity check failure synch-Fail-BkCPUFailedToRespond(33) synchronization failed since backup CPU failed to respond synch-sanityCheck-InProgress(34) synchronization sanity check is in progress synch-sanityCheck-Completed(35) synchronization sanity check is completed failedToAbort(36) failed to abort " ::= { returnCode 11 } percentComplete OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed." ::= { returnCode 12 } ipTypeReasonCode OBJECT-TYPE SYNTAX INTEGER { siteEtherIpAddr(1), siteEtherIpMask(2), siteGatewayAddr(3), siteRemoteMgrAddr1(4), siteRemoteMgrAddr2(5), siteRemoteMgrAddr3(6), siteRemoteMgrAddr4(7), siteRemoteMgrAddr5(8), inBandPrimaryIpAddress(9), inBandPrimaryIpMask(10), inBandBackupIpAddress(11), inBandBackupIpMask(12), siteIncorrectGatewaySubnet(13), siteGatewayInbandAddrMatch(14), siteIncorrectInbandSubnet(15), siteIncorrectEthernetSubnet(16), cpuIpSameAsSwitchIpAddr(17), cpuIpAddrInvalid(18), cpuAndIpMaskInvalid(19), switchAndCpuIpSubnetMismatch(20), switchIpAddrInvalid(21), switchAndIpMaskInvalid(22), cpuIpMaskClashWithInbandSubnet(23), switchIpMaskClashWithInbandSubnet(24), siteGatewayAddrInvalid(25), siteGatewayInbandAddrClash(26), unableToApplyGatewayIpAddr(27), unableToSetCpuIpInEPROM(28), unableToApplyCpuIpAddr(29), unableToApplySwitchIpAddr(30), unableToRevertBackToCpuIpAddr(31), gatewayAndCpuIpSubnetMismatch(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of which ip address had the problem." ::= { returnCode 13 } timingReasonCode OBJECT-TYPE SYNTAX INTEGER { invalidForwardDelay-MaxAge(1), invalidHelloTime-MaxAge(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of type of relationship violated." ::= { returnCode 14 } alarmCardReasonCode OBJECT-TYPE SYNTAX INTEGER { inputContactClosed(1), inputContactOpen(2), outputActivated(3), outputDactivated(4), audibleLocalAlarmEnable(5), audibleLocalAlarmCutoff(6), audibleRemoteAlarmEnable(7), audibleRemoteAlarmCutoff(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " Configuration status of the alarm inputs and outputs. cutoff - alarm turned off. There are two ways to turn off the audible alarm, locally via the pushbutton switch on the alarm module, and remotely, via the remote alarm cutoff, one of the alarm card inputs. " ::= { returnCode 15 } removeConfigFiles OBJECT-TYPE SYNTAX INTEGER { from-PrimaryCPU(1), from-BackupCPU(2), chassisReboot(3), failed-VersionControlInProgress(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the status of a remove configuration files request. from-PrimaryCPU(1) configuration files are removed from primary CPU from-BackupCPU(2) configuration files are removed from backup CPU chassisReboot(3) chassis reboot being done after removing configuration files failed-VersionControlInProgress(4) configuration file removal failed due to ongoing version conflict " ::= { returnCode 16 } spvcConfigFailureCode OBJECT-TYPE SYNTAX INTEGER { noSpvcConfigured(1), spvcAlreadyConfigured(2), noInterfaceConfigured(3), interfaceNotConfiguredAsRequired(4), notActiveSpvc(6), slotA-OutofRange(7), portA-OutofRange(8), channelA-OutofRange(9), vpiVciWithInSvcRange(10), retryIntervalExceedsTheLimit(11), interfaceNotConfiguredAsCE(12), interfaceNotConfiguredAsVbr(13), interfaceNotConfiguredAsAtm(14), noAddressConfiguredOnTheInterface(15), localAddressNotValid(16), vpiVciUnavailable(17), pvcAlreadySetupOnVpiVci(18), pvcAlreadySetupOnInterface(19), retryIntervalTooSmall(20), interfaceNotConfiguredAsFr(21), dlciUnavailable(22), pvcAlreadySetupOnDlci(23), frTrafficParamsUnsupp(24), dsp2ParamsUnsupp(25), sarNotConfigReq(26), vuniNotMatch(27) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for failure while configuring/modifying SPVC parameters. noSpvcConfigured(1) : There endpoint has not been configured as SPVC, so SPVC parameters cannot be modified. spvcAlreadyConfigured(2) : SPVC is already configured so it cannot be configured again as SPVC endpoint. noInterfaceConfigured(3) : There is no interface configured on the particular SSPPCCC. interfaceNotConfiguredAsRequired(4) : While configuring an SPVC endpoint, the interface is not as desired (e.g.it is not CE, while trying to configure CES SPVC). notActiveSpvc(6) : If the endpoint is configured with flowType ptToMptA2B the connType has to be activeSvc. slotA-OutofRange(7) : A-side of SPVC connection has slot number out of range. portA-OutofRange(8): A-side of SPVC connection has port number out of range. channelA-OutofRange(9): A-side of SPVC connection has channel number out of range. vpiVciWithInSvcRange(10) : A-side side of SPVC connection has vpi/vci configured in the SVC range of the A-side ATM interface. retryIntervalExceedsTheLimit(11) : retryInterval exceeds 3600s. interfaceNotConfiguredAsCE(12) : SPVC endpoint is configured as something other than CE. interfaceNotConfiguredAsVbr(13) : SPVC endpoint is configured as something other than TE. interfaceNotConfiguredAsAtm(14) : SPVC endpoint is configured as something other than ATM. noAddressConfiguredOnTheInterface(15) : Local address not configured for the particular SPVC being configured. localAddressNotValid(16) : invalid NSAP address format vpiVciUnavailable(17) : SPVC already setup on particular vpi/vci. pvcAlreadySetupOnVpiVci(18) : vpi/vci being used by another pvc. pvcAlreadySetupOnInterface(19) : redundant, same as above. interfaceNotConfiguredAsFr(21) : SPVC endpoint is configured as something other than Fr dlciUnavailable(22) : dlci not available at Passive endpoint. pvcAlreadySetupOnDlci(23) : dlci being used by another pvc. frTrafficParamsUnsupp(24) : fr-atm traffic mapping failure. dsp2ParamsUnsupp(25) : dsp2 params not supported for the call. sarNotConfigReq(26) : sarType not configured as required." ::= { returnCode 17 } imaGrpChannelStatus OBJECT-TYPE SYNTAX INTEGER { startupFe(1), cfgAbort(2), cfgAbortFe(3), insuffLinks(4), insuffLinksFe(5), blockedNe(6), blockedFe(7), timingSynch(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " The return value for the imaGrpChannelFailNotify trap. startupFe(1) Far-end is in the state of start-up cfgAbort(2) this state is entered when the far-end tries to use unacceptable configuration parameters including invalid frame length and incompatable symmetry cfgAbortFe(3) Far-end reported unacceptable configuration parameters including invalid frame length and incompatable symmetry insuffLinks(4) Near-end reported less than the min number of Tx links are active or less than the min number of Rx links are active insuffLinksFe(5) Far-end reported less than the min number of Rx links are active or less than thenmin number of Tx links are active blockedNe(6) Near-end is administratively out-of-service blockedFe(7) Far-end is administratively out-of-service timingSynch(8) A possible configuration mismatch has occurred (CTC and CTC modes are not the same at both ends of the IMA virtual links." ::= { returnCode 18 } atmImaIntfStatus OBJECT-TYPE SYNTAX INTEGER { lif(1), lods(2), txMisConnect(3), rfi(4), fault(5), txUnusableFe(6), rxUnusableFe(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " The return value for the atmImaIntfFailNotify trap. lif -- Persistence of LIF defect at near-end (Loss of IMA Frame) lods -- Persistence of LODS defect at near-end (Link Out of Delay Synchronization) txMisConnect -- The link is mis-connected (not connected to the same far-end as the other links in the group.) rfi -- Persistence of RDI-IMA defect at near-end (Remote Failure Indicator) fault -- Implementation specific fault at near-end txUnusableFe -- Tx link forced to unusable due to far-end behavior rxUnusableFe -- Rx link forced to unusable due to far-end behavior" ::= { returnCode 19 } deviceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "device ID is used as the number of external devices. Each device can be an external input device or control output device." ::= { returnCode 20 } oamTestFailureReasonCode OBJECT-TYPE SYNTAX INTEGER { invalidSPCforOAM(1), invalidIntfForOAM(2), invalidLocationLength(3), oamNotSupportedForThisConnection(4), loopbackTestAlreadyRunning(5), loopbackTestNotRunning(6), oamLocalResourcesUnavailable(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason why an OAM Loopback Test request has failed. invalidSPCforOAM: There is no such slot/port/channel in this box. invalidIntfForOAM: There is no such interface that OAM enabled. invalidLocationLength: The length of the Loopback Lo cation ID id not valid. oamNotSupportedForThisConnection: This connection is not OAM enabled.so OAM loopback is invalid test. loopbackTestAlreadyRunning: OAM loopback is waiting for response,not expect for another test. loopbackTestNotRunning: Invalid Test Actio. oamLocalResourcesUnavailable: Memery Alloc Fail." ::= { returnCode 21 } pnniCode OBJECT-TYPE SYNTAX INTEGER { pnniInvEndSysPortId(1), pnniNodeAdmStatNotUp(2), pnniProtLnkStatDown(3), pnniProtLnkStatUpNotAdv(4), pnniProtLinkStatUpAdv(5), pnniIntfAdmStatUp(6), pnniNodeNotCfg(7), pnniRtAddrAddedByIlmi(8), pnniRtAddrDelByIlmi(9), pnniLvlMismatchInNodeId(10), pnniLvlMismatchInPGId(11), pnniATMAddrInvInNodeId(12), pnniATMAddrInvInPGId(13), pnniIntfAdmStatNotDel(14), pnniNodeAdmStatUp(15), pnniNodeRowStatNotActive(16), pnniNewRtAddrAdded(17), pnniRtAddrMod(18), pnniAdvtNodeIdNotMine(19), pnniFeatureNotSupported(20) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for Miscellaneous Reasons in PNNI Configuration pnniInvEndSysPortId(1) : Invalid EndSystem PortId. pnniNodeAdmStatNotUp(2) : Admin Status of Node is not up. pnniProtLnkStatDown(3) : Pnni Lnk status is down. pnniProtLnkStatUpNotAdv(4) : Pnni Lnk status up but not advertised. pnniProtLinkStatUpAdv(5) : Pnni Lnk status up and advertised. pnniIntfAdmStatUp(6) : Pnni Intf Admin Status up. pnniNodeNotCfg(7) : Pnni Node not configured in the switch. pnniRtAddrAddedByIlmi(8) : Pnni Route added succesfully from ILMI. pnniRtAddrDelByIlmi(9) : Pnni Route deleted succesfully from ILMI. pnniLvlMismatchInNodeId(10) : Level mismatch in Node Id. pnniLvlMismatchInPGId(11) : Level mismatch in Peer Group Id. pnniATMAddrInvInNodeId(12) : ATM Address entered in Node Id invalid. pnniATMAddrInvInPGId(13) : ATM Address entered in Peer Group Id invalid. pnniIntfAdmStatNotDel(14) : Pnni Intf Admin Status Not deleted. pnniNodeAdmStatUp(15) : Pnni Node Admin Status up. pnniNodeRowStatNotActive(16) : Pnni Node Row Status not active - cannot modify pnniNewRtAddrAdded(17) : New route added into pnni route address table. pnniRtAddrMod(18) : Route modified in pnni Address table. pnniAdvtNodeIdNotMine(19) : Advertised NodeId does not belong to this psax. pnniFeatureNotSupported(20) : pnni feature unsupported." ::= { returnCode 22 } swtchNodeIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Switch Node Index for PNNI." ::= { returnCode 23 } oc3APSPairPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "APS Pair Port index - SSPP" ::= { returnCode 24 } oc3APSReasonCode OBJECT-TYPE SYNTAX INTEGER { localprotectDoNotRevert(1), localprotectManualSw(8), localprotectSD(10), localprotectSF(12), localprotectForced(14), localprotectLockOut(15), localworkingDoNotRevert(17), localworkingManualSw(24), localworkingSD(26), localworkingSF(28), localworkingForced(30), remoteprotectDoNotRevert(33), remoteprotectManualSw(40), remoteprotectSD(42), remoteprotectSF(44), remoteprotectForced(46), remoteprotectLockOut(47), noRequest(48), remoteworkingDoNotRevert(49), remoteworkingManualSw(56), remoteworkingSD(58), remoteworkingSF(60), remoteworkingForced(62) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line local - near-end remote - far-end working - working port protect - protecting port DoNotRevert - after switching from working line to protection line, don't revert to working line even it returns to work ManualSw - switch over by user command SD - signal degradation SF - signal failure Forced - force switch over LockOut - don't allow switch over to a line " ::= { returnCode 25 } oc3APSK1K2Rx OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Rx K1/K2 followed by hex value of K1, K2" ::= { returnCode 26 } oc3APSK1K2Tx OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tx K1/K2 followed by hex value of K1, K2" ::= { returnCode 27 } oc3APSSelectorState OBJECT-TYPE SYNTAX INTEGER { w-active-p-standby(1), w-standby-p-active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Working port: active/standby Protection port: standby/active" ::= { returnCode 28 } oc3APSWorkingLineSignalStatus OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024) } MAX-ACCESS read-only STATUS current DESCRIPTION "Line Status of the working port sent in a trap enumeration explanations are the same as those of oc3APSProtectionLineSignalStatus " ::= { returnCode 29 } oc3APSProtectionLineSignalStatus OBJECT-TYPE SYNTAX INTEGER { noAlarm(1), signalDegradation(2), signalFailure(4), lostCellDelineation(8), switchByteFailure(16), ais-l(32), ais-p(64), lop(128), lof(256), los(512), moduleFailure(1024) } MAX-ACCESS read-only STATUS current DESCRIPTION "Line Status of the protection port sent in a trap. noAlarm(1) no alarm signalDegradation(2) signal bit error rate is higher than the specified threshold signalFailure(4) signal bit error rate is much higher than the specified threshold lostCellDelineation(8) unable to identify cell boundary switchByteFailure(16) switch bytes(k1,k2) of SONET header have invalid code ais-l(32) line header of SONET frame gives alarm indication signal ais-p(64) path header of SONET frame gives alarm indication signal lop(128) 1)a valid STS or VT pointer can't be obtained by using the pointer interpretation rules and the pointer word doesn't contain all-ones; 2)a number of consecutive with the NDF set to 1001 but not indicating concatenation is received lof(256) loss of frame los(512) loss of signal moduleFailure(1024) module failure" ::= { returnCode 30 } arpStatus OBJECT-TYPE SYNTAX INTEGER { success(1), noArpEntries(2), tryAgain(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Success: Arp Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes." ::= { returnCode 31 } routingStatus OBJECT-TYPE SYNTAX INTEGER { success(1), noRoutes(2), tryAgain(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Success: Routing Data is Available. Failure: Reply from RS Card timed-out. TryAgain: The request was not honoured as it came too soon (within a sec). Try again after 1 sec and we will return either Success or Noroutes." ::= { returnCode 32 } vpnTrapStatus OBJECT-TYPE SYNTAX INTEGER { vpnAddOk(1), vpnInternalFailure(2), vpnTooMany(3), vpnBadSlot(4), vpnBadId(5), vpnBadState(6), vpnBadTimerVal(7), vpnAlreadyExists(8), vpnCantLocate(9), vpnDelInProgress(10), vpnLockedIdle(11), vpnGeneralFailure(12), vpnNotAllowed(13), vpnShutting(14), vpnDisabled(15), vpnModifyOk(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server VPN level operations. vpnAddOk(1) VPN Creation OK vpnInternalFailure(2) Memory Corruption Failure vpnTooMany(3) Exceeded Max # of VPNs vpnBadSlot(4) Impossible Slot Number vpnBadId(5) VPN ID Must Be Between 1-6 vpnBadState(6) VPN State Machine Confused vpnBadTimerVal(7) Bad Timer Value: State Machine vpnAlreadyExists(8) VPN Already Exists vpnCantLocate(9), Cannot Find Referenced VPN vpnDelInProgress(10) Deletion In Progress -Must Wait vpnLockedIdle(11) VPN Taken Out Of Service vpnGeneralFailure(12) Reference Prev.Trap For Reason vpnNotAllowed(13) Operation Not Allowed vpnShutting(14) Shutting Down VPN -Must Wait vpnDisabled(15) Some VPN SubSystem Not Working vpnModifyOk(16) Modify Operation OK" ::= { returnCode 33 } ipIntfStatus OBJECT-TYPE SYNTAX INTEGER { intOK(1), intIntFailure(2), intTooMany(3), intBadSlot(4), intBadId(5), intBadState(6), intBadTimer(7), intExists(8), intCantFind(9), intDelInProgress(10), intLockedIdle(11), intBadNetMask(12), intShutting(13), intDisabled(14), intNotHostAddr(15), intBadIpAddr(16), intBadRouterId(17), intBadIntfId(18), intCantFindRouter(19), intCantFindIntf(20), intCantOnSameSubnet(21), intCantModIntfAddr(22), intCantModIntfMask(23), intCantModIntfRipVer(24) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server IP interface operations. intOK(1) Interface OK. intIntFailure(2) Memory Corruption intTooMany(3) Exceeded Max # Of Interfaces intBadSlot(4) Impossible Slot Number intBadId(5), Impossible Interface ID intBadState(6) State Machine Confused intBadTimer(7) Bad Timer Value: State Machine intExists(8) Interface Already Exists intCantFind(9) Unused intDelInProgress(10) Deleting: -Must Wait intLockedIdle(11) Interface Taken Out Of Service intBadNetMask(12) Illegal Network Mask intShutting(13) Shutting Down -Must Wait intDisabled(14) Some Subsystem Not Working intNotHostAddr(15) Host Address Is Missing intBadIpAddr(16) Illegal IP Address intBadRouterId(17) Illegal VPN/Router ID intBadIntfId(18) Illegal Interface ID intCantFindRouter(19) No Corresponding VPN intCantFindIntf(20) Interface Does Not Exist intCantOnSameSubnet(21) Interface Already On This Subnet intCantModIntfAddr(22) Cannot Change Interface Addr intCantModIntfMask(23) Cannot Change Interface Mask intCantModIntfRipVer(24) Cannot Change Rip Ver #" ::= { returnCode 34 } subChanStatus OBJECT-TYPE SYNTAX INTEGER { scOK(1), scIntFailure(2), scTooMany(3), scBadSlot(4), scBadId(5), scBadState(6), scBadTimerVal(7), scExists(8), scCantFind(9), scDelInProgress(10), scLockedIdle(12), scSameVc(13), scFailedSetup(14), scShutting(15), scDisabled(16), scSetupErr(17), scRemvErr(18), scBadPortNo(19), scBadImIpAddr(20), scBadRouterId(21), scBadIntfId(22), scBadChanId(23), scCantFindRouter(24), scCantFindIntf(25), scCantFindChan(26) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server sub channel connections operations. scOK(1) SubChannel OK scIntFailure(2) Memory Corruption scTooMany(3) Too Many SubChannels scBadSlot(4) Impossible Slot Number scBadId(5) Bad VPN ID scBadState(6), State Machine Confusion scBadTimerVal(7) Bad Timer Value: State Machine scExists(8) SubChannel Already Exists scCantFind(9) Unused scDelInProgress(10) Deleting: -Must Wait scLockedIdle(12) SubChannel Taken Out Of Serv. scSameVc(13) Connection In Use Already scFailedSetup(14) Referene Previous Trap scShutting(15) Shutting Down: -Must Wait scDisabled(16) SubSystem Disabled. scSetupErr(17) scRemvErr(18) Error Removing SubChannel scBadPortNo(19) Bad Port Specified scBadImIpAddr(20) Bad InBand IP Address scBadRouterId(21) Bad VPN/Router ID scBadIntfId(22) Impossible Interface ID scBadChanId(23) Impossible Channel ID scCantFindRouter(24) Cannot Find VPN scCantFindIntf(25) Cannot Find Interface scCantFindChan(26) Cannot Find SubChannel" ::= { returnCode 35 } routeSrvStatus OBJECT-TYPE SYNTAX INTEGER { rsCardOK(1), rsModInitFail(2), rsIntfInitFail(3), rsPortInitFail(4), rsRipUpdateIntOK(5), rsRipUpdateIntFail(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. rsCardOK(1) Route Server OK rsModInitFail(2) Route Server Failed Module Init. rsIntfInitFail(3) Route Server Failed Intf. Init. rsPortInitFail(4) Route Server Failed Port Init rsRipUpdateIntOK(5) Rip Update Interval was updated ok for the route server card. rsRipUpdateIntFail(6) Rip Update Interval was not updated mostly because of some VPN's still in service." ::= { returnCode 36 } apsFailureReasonCode OBJECT-TYPE SYNTAX INTEGER { protectionCard-notPresent(1), protectionCardType-notAPS(2), protectionCardType-incompatible(3), protectionCard-notInUnconfiguredState(4), protectionCard-notUnprotected(5), resource-access-failure(6), incorrect-APSconfiguration(7), protectionPort-Active(8), workingPort-localLoop-notAllowed(9), protectionPort-localLoop-notAllowed(10) } MAX-ACCESS read-only STATUS current DESCRIPTION " Identification of cause for automatic protection switching failure. protectionCard-notPresent(1) protection card doesn't exist protectionCardType-notAPS(2) card type of protection card is not APS protectionCardType-incompatible(3) card types of protection card and working card are incompatible protectionCard-notInUnconfiguredState(4) protection card is already configured protectionCard-notUnprotected(5) protection card is not unprotected resource-access-failure(6) internal failure application incorrect-APSconfiguration(7) correct aps configuration: 1)oc3APSConfiguration of working port is working and oc3APSConfiguration of protection port is protection 2) oc3APSConfiguration of working and protection ports are unprotected protectionPort-Active(8) protection port must be inactive when breaking aps pair workingPort-localLoop-notAllowed(9) working port can't be configured as localLoop protectionPort-localLoop-notAllowed(10) protection port can't be configured as localLoop either" ::={ returnCode 37 } statRtStatus OBJECT-TYPE SYNTAX INTEGER { statRtOk(1), statRtIntFailure(2), statRtMany(3), statRtSlot(4), statRtBadId(5), statRtBadState(6), statRtBadTimer(7), statRtExists(8), statRtCantFind(9), statRtDelInProgress(10), statRtLockedIdle(11), statRtBadNetMask(12), statRtCorrelation(13), statRtShutting(14), statRtDisabled(15), statRtBadMetric(16), statRtBadIPAddr(17), intfRtExists(18), statRtBadSlot(19), statRtBadRouterId(20), statRtBadRouteId(21), statRtBadRouteNetMask(22), statRtBadRouteIpAddr(23), statRtBadGtwyIpAddr(24), statRtBadDestIpAddr(25), statRtBadDestNetMask(26), statRtCantFindRouter(27), statRtCantFindRoute(28) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server static route condititions. statRtOk(1) Static Rt OK statRtIntFailure(2) Memory Corruption statRtMany(3) Too Many Static Routes statRtSlot(4) Impossible Slot ID statRtBadId(5) Bad VPN ID statRtBadState(6) State Machine Confusion statRtBadTimer(7) Bad Timer Value: State Machine statRtExists(8) Static Rt Already Exists statRtCantFind(9) Unused statRtDelInProgress(10) Deleting: -Must Wait statRtLockedIdle(11) Static Rt Taken Out Of Service statRtBadNetMask(12) Bad Network Mask statRtCorrelation(13) Internal Correlation Error statRtShutting(14) Shutting Down: -Must Wait statRtDisabled(15) SubSystem Failure statRtBadMetric(16) Illegal Metric Value statRtBadIPAddr(17) Bad Static Route IP Address intfRtExists(18) Static Route On Different Intf. statRtBadSlot(19) Impossible Slot ID statRtBadRouterId(20) Bad VPN/Router ID statRtBadRouteId(21) Illegal Static Route ID statRtBadRouteNetMask(22) Bad Stat Route Network Mask statRtBadRouteIpAddr(23) Bad Interface IP Address statRtBadGtwyIpAddr(24) Bad Gateway IP Address statRtBadDestIpAddr(25) Bad Destination IP Address statRtBadDestNetMask(26) Bad Destination IP Mask statRtCantFindRouter(27) Cannot Find VPN statRtCantFindRoute(28) Cannot Find Static Route" ::= { returnCode 38 } portFailureReasonCode OBJECT-TYPE SYNTAX INTEGER { insufficientModuleBandwidth(1), localLoopNotAllowedWhenInAPS(2), msBitStuffingEnabledOnlyForCE(3), invalidOption(4), hasInterfaceInService(5), unsupportedBaudRate(6), msLOSDetectionNotEnabled(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of cause for failure in changing the parameters of a port insufficientModuleBandwidth(1) insufficient module bandwidth localLoopNotAllowedWhenInAPS(2) local loop is not allowed when a port is in an automatic switching pair. msBitStuffingEnabledOnlyForCE(3) if msBitStuffing is enabled, only interface type circuit emulation is allowed invalidOption(4) invalid option hasInterfaceInService(5) interface is in-service unsupportedBaudRate(6) the baud rate is not supported msLOSDetectionNotEnabled(7) msLOSDetection is not enabled " ::= { returnCode 39 } dlciNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the dlci being used." ::= { returnCode 40 } ipAddrNumber OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the host/network to be echoed" ::= { returnCode 41 } pingStatusReasonCode OBJECT-TYPE SYNTAX INTEGER { alive(1), not-Alive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The response value - Alive destination can be reached Not Alive destination can't be reached" ::= { returnCode 42 } primarySoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version running on primary cpu." ::= { returnCode 43 } backupSoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version running on backup cpu." ::= { returnCode 44 } oamActDeactResultCode OBJECT-TYPE SYNTAX INTEGER { eteCCActSuccTowardsFarEnd(1), eteCCActSuccTowardsNearEnd(2), eteCCActSuccTowardsBothEnd(3), eteCCActDeniedTowardsFarEnd(4), eteCCActDeniedTowardsNearEnd(5), eteCCActDeniedTowardsBothEnd(6), eteCCActFailedTowardsFarEnd(7), eteCCActFailedTowardsNearEnd(8), eteCCActFailedTowardsBothEnd(9), eteCCDeactSuccTowardsFarEnd(10), eteCCDeactSuccTowardsNearEnd(11), eteCCDeactSuccTowardsBothEnd(12), eteCCDeactDeniedTowardsFarEnd(13), eteCCDeactDeniedTowardsNearEnd(14), eteCCDeactDeniedTowardsBothEnd(15), eteCCDeactFailedTowardsFarEnd(16), eteCCDeactFailedTowardsNearEnd(17), eteCCDeactFailedTowardsBothEnd(18), segCCActSuccTowardsFarEnd(19), segCCActSuccTowardsNearEnd(20), segCCActSuccTowardsBothEnd(21), segCCActDeniedTowardsFarEnd(22), segCCActDeniedTowardsNearEnd(23), segCCActDeniedTowardsBothEnd(24), segCCActFailedTowardsFarEnd(25), segCCActFailedTowardsNearEnd(26), segCCActFailedTowardsBothEnd(27), segCCDeactSuccTowardsFarEnd(28), segCCDeactSuccTowardsNearEnd(29), segCCDeactSuccTowardsBothEnd(30), oamReqFunctionNotImplemented(31), oamReqFailLocRsrcUnavl(32), oamActDeactPrevReqInProgress(33), oamActDeactInvalidParams(34), oamActDeactInvalidIntf(35), oamNotSupportedForThisConnection(36), oamCCnotSupportedForThisConnection(37), oamPrevActDeactReqFailed(38), oamEteLossOfContinuitySet(39), oamEteLossOfContinuityCleared(40), oamSegLossOfContinuitySet(41), oamSegLossOfContinuityCleared(42), oamActDeactPMOnlySupportOC3(43), oamPMnotSupportedForThisConnection(44), oamPMBRnotSupportedForThisConnection(45), etePMActSuccTowardsFarEnd(46), etePMActSuccTowardsNearEnd(47), etePMActSuccTowardsBothEnd(48), etePMActDeniedTowardsFarEnd(49), etePMActDeniedTowardsNearEnd(50), etePMActDeniedTowardsBothEnd(51), etePMActFailedTowardsFarEnd(52), etePMActFailedTowardsNearEnd(53), etePMActFailedTowardsBothEnd(54), etePMDeactSuccTowardsFarEnd(55), etePMDeactSuccTowardsNearEnd(56), etePMDeactSuccTowardsBothEnd(57), etePMBRActSuccTowardsFarEnd(58), etePMBRActSuccTowardsNearEnd(59), etePMBRActSuccTowardsBothEnd(60), etePMBRActDeniedTowardsFarEnd(61), etePMBRActDeniedTowardsNearEnd(62), etePMBRActDeniedTowardsBothEnd(63), etePMBRActFailedTowardsFarEnd(64), etePMBRActFailedTowardsNearEnd(65), etePMBRActFailedTowardsBothEnd(66), etePMBRDeactSuccTowardsFarEnd(67), etePMBRDeactSuccTowardsNearEnd(68), etePMBRDeactSuccTowardsBothEnd(69), segPMActSuccTowardsFarEnd(70), segPMActSuccTowardsNearEnd(71), segPMActSuccTowardsBothEnd(72), segPMActDeniedTowardsFarEnd(73), segPMActDeniedTowardsNearEnd(74), segPMActDeniedTowardsBothEnd(75), segPMActFailedTowardsFarEnd(76), segPMActFailedTowardsNearEnd(77), segPMActFailedTowardsBothEnd(78), segPMDeactSuccTowardsFarEnd(79), segPMDeactSuccTowardsNearEnd(80), segPMDeactSuccTowardsBothEnd(81), segPMBRActSuccTowardsFarEnd(82), segPMBRActSuccTowardsNearEnd(83), segPMBRActSuccTowardsBothEnd(84), segPMBRActDeniedTowardsFarEnd(85), segPMBRActDeniedTowardsNearEnd(86), segPMBRActDeniedTowardsBothEnd(87), segPMBRActFailedTowardsFarEnd(88), segPMBRActFailedTowardsNearEnd(89), segPMBRActFailedTowardsBothEnd(90), segPMBRDeactSuccTowardsFarEnd(91), segPMBRDeactSuccTowardsNearEnd(92), segPMBRDeactSuccTowardsBothEnd(93), eteSendPMCell(94), eteReceiveBRErrMessage(95), receiveBRErrMessage(96), receiveFPMErrMessage(97), sendPMCell(98) } MAX-ACCESS read-only STATUS current DESCRIPTION "Various result codes for the operator's command for OAM Activation-Deactivation. eteCCActSuccTowardsFarEnd: eteCCActSuccTowardsNearEnd: eteCCActSuccTowardsBothEnd: eteCCDeactSuccTowardsFarEnd: eteCCDeactSuccTowardsNearEnd: eteCCDeactSuccTowardsBothEnd: ete CC Act/Deact-request send out to far/near/both end eteCCActDeniedTowardsFarEnd: eteCCActDeniedTowardsNearEnd: eteCCActDeniedTowardsBothEnd: eteCCDeactDeniedTowardsFarEnd: eteCCDeactDeniedTowardsNearEnd: eteCCDeactDeniedTowardsBothEnd: ete CC Act/Deact-request is denied. eteCCActFailedTowardsFarEnd: eteCCActFailedTowardsNearEnd: eteCCActFailedTowardsBothEnd: eteCCDeactFailedTowardsFarEnd: eteCCDeactFailedTowardsNearEnd: eteCCDeactFailedTowardsBothEnd: ete CC Act/Deact-request is failed sent out segCCActSuccTowardsFarEnd: segCCActSuccTowardsNearEnd: segCCActSuccTowardsBothEnd: segCCDeactSuccTowardsFarEnd: segCCDeactSuccTowardsNearEnd: segCCDeactSuccTowardsBothEnd: segment CC Act/Deact-request send out to far/near/both end. segCCActDeniedTowardsFarEnd: segCCActDeniedTowardsNearEnd: segCCActDeniedTowardsBothEnd: segment CC Act-request is denied. segCCActFailedTowardsFarEnd: segCCActFailedTowardsNearEnd: segCCActFailedTowardsBothEnd: ete CC Act-request is failed sent out. oamReqFunctionNotImplemented: The function user issued is not impemeted. oamActDeactPrevReqInProgress: this interface is in wait for response state. SendPMCell: a management cell has been sent out to IO card indicating PM cell need to be sent. eteReceiveBRErrMessage: a BR message has been forwarded to CPU indicating BR error. receiveFPMErrMessage: a FPM message has been forwarded to CPU indicating FPM error." ::= { returnCode 45 } tasCmprsAnnceReasonCode OBJECT-TYPE SYNTAX INTEGER { cmprs-success(1), cmprs-Fail-equipment-Fail(2), cmprs-Fail-connections-Fail(3), cmprs-Fail-resource-busy(4), cmprs-Fail-resource-unavail(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a compress announcement request." ::= { returnCode 46 } tasTstLineReasonCode OBJECT-TYPE SYNTAX INTEGER { tst-success(1), tst-Fail-equipment-Fail(2), tst-Fail-invalid-params(3), tst-Fail-resource-unavail(4), tst-Fail-resource-busy(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a test line request." ::= { returnCode 47 } gr303PPSReasonCode OBJECT-TYPE SYNTAX INTEGER { forced(1), normal(2), userCommandFailed-inhibited(3), userCommandFailed-PathOos(4), userCommandFailed-badPathId(5), userCommandFailed-maxRetry(6), userCommandFailed-inprogress(7), userCommandFailed-unknown(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "These reason codes are the result of GR303 Path Protection Switching (PPS) command issued by user" ::= { returnCode 48 } gr303PPSSource OBJECT-TYPE SYNTAX INTEGER { none(1), byIdt(2), byUser(3), byLocalAgent(4), suspendedByIdt(5), suspendedByLocalAgent(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the initiator of the PPS switching" ::= { returnCode 49 } tasMemReasonCode OBJECT-TYPE SYNTAX INTEGER { mem-init-success(1), mem-init-Fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a memory init request." ::= { returnCode 50 } tasTrapTstId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Announcement ID for trap." ::= { returnCode 51 } tasTrapAnnceId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "test id for trap." ::= { returnCode 52 } atmVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Vpi is used in identification of Traps " ::= { returnCode 53 } atmVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Vci is used in identification of Traps " ::= { returnCode 54 } iptResultCode OBJECT-TYPE SYNTAX INTEGER { interfaceProtectioniptAlreadyExistInterface(1), interfaceProtectioniptInvalidInterface (2), interfaceProtectioniptInvalidParams(3), interfaceProtectioniptTryToDeleteEmptyTable(4), interfaceProtectioniptInvalidConfiguation(5), interfaceProtectioniptSuccessfulSwichOver(6), interfaceProtectioniptSuccessfulSwichBack(7), interfaceProtectioniptFailedSwichOver(8), interfaceProtectioniptFailedSwichBack(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Various result codes for the operator's command forsetting/deleting interface protection group. interfaceProtectioniptAlreadyExistInterface: Expect another interface to be protected. interfaceProtectioniptInvalidInterface:interface invalid interfaceProtectioniptInvalidParams: invalid Parameters interfaceProtectioniptTryToDeleteEmptyTable:Table is already empty,can not be deleted . interfaceProtectioniptInvalidConfiguation: interfaceProtectioniptSuccessfulSwichOver: interface is switched over to the secondry interface. interfaceProtectioniptSuccessfulSwichBack: interface is switched back from secondry interface. interfaceProtectioniptFailedSwichOver: interface is failed switched over to the secondry interface. interfaceProtectioniptFailedSwichBack: interface is failed switched back from secondry interface." ::= { returnCode 55 } pgtResultCode OBJECT-TYPE SYNTAX INTEGER { interfaceProtectionpgtAlreadyExistInterface(1), interfaceProtectionpgtInvalidInterface (2), interfaceProtectionpgtInvalidParams(3), interfaceProtectionpgtryToDeleteEmptyTable(4), interfaceProtectionpgtSuccessfulSwichOver(5), interfaceProtectionpgtSuccessfulSwichBack(6), interfaceProtectionpgtFailedSwichOver(7), interfaceProtectionpgtFailedSwichBack(8), interfaceProtectionpgtInvalidConfiguation(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Various result codes for the operator's command for interface protection ." ::= { returnCode 56 } tasmControlBlockAllocFailReasonCode OBJECT-TYPE SYNTAX INTEGER { res-alloc-success(1), res-alloc-Fail-announce-control-blocks-mem-unavail(2), res-alloc-Fail-digit-control-blocks-mem-unavail(3), res-alloc-Fail-line-test-control-blocks-mem-unavail(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a tasm control block memory allocation request." ::= { returnCode 57} tasmCacheMemAllocFailReasonCode OBJECT-TYPE SYNTAX INTEGER { res-alloc-success(1), res-alloc-Fail-announce-cache-mem-unavail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of a tasm control block memory allocation request." ::= { returnCode 58} atmTrunkingConfigFailureCode OBJECT-TYPE SYNTAX INTEGER { localIWFAlreadyConfigured(1), localIWFAtmAddressError(2), localIWFIdOutOfRange(3), maxNumberRmtIWFOutOfRange(4), rmtIWFAlreadyConfigured(5), rmtIWFIdOutOfRange(6), rmtIWFAtmAddressError(7), vccIdError(8), vccPvcParameterNotAcceptable(9), vccTrafficParameterNotValid(10), vccViVuniNotValid(11), vccTrunkParameterNotValid(12), vccTrunkFeatureParameterNotValid(13), localIwfNotConfigured(14), localIwfIdNotMatch(15), localIwfStatus(16), rmtIwfNotConfigured(17), rmtIwfModeNotCompatible(18), rmtIwfStatus(19), vccAlreadyConfigured(20), vccPvcCacReject(21), requiredFieldMissing(22), outOfResource(23), rowStatusError(24), generalErrorUnspecified(25) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has already been configured, the parameters can not be changed or apply again. localIWFAtmAddressError(2): the ATM Address for Local IWF is not valid or this address has been used by someone else. localIWFIdOutOfRange(3): the Identification of Local IWF is out of range. maxNumberRmtIWFOutOfRange(4): the maximum number of Remote IWF is out of range. rmtIWFAlreadyConfigured(5): this remote IWF has already been configured( with index atmTrunkingRmtIWFIdentifier). rmtIWFIdOutOfRange: the identifier for the remote IWF is out of range. rmtIWFAtmAddressError: the ATM Address for remote IWF is not valid or this address has been used by someone else. vccIdError: the VCC ID for the SigVcc or BrVcc is 0, or this VCC ID is out of range or it has been used by someone else. vccPvcParameterNotAcceptable: the parameters of PVC side, including slot, port, channel, vpi, vci, are not acceptable. vccTrafficParameterNotValid: the VCC traffic parameters are not acceptable, including FwPcr01, BwPcr01, FwScr01, BwScr01, FWMbs01, BwMbs01, BrVccServiceType, BrVccSarType. vccViVuniNotValid: the configuration of Egress Vi/VUNI is not acceptable. vccTrunkParameterNotValid: the parameters for the Trunk is not supported, including BrVccMaxAal2ChanId, BrVccCircuitModeDataSupp, BrVccFrameModeSupp, BrVccFaxModeSupp, CASPktXportSupp, BrVccDTMFPktXportSupp, BrVccMFR1PktXportSupp, BrVccMFR2PktXportSupp, BrVccPCMEncoding, BrVccMaxFrameLength, BrVccIdleChannSuprSupp, BrVccSilenceDetSupp, BrVccCompressionSpec,AudioProfileId, SigVccSignaling. vccTrunkFeatureParameterNotValid: PSAX proprietary feature parameters not supported including SigVccInactiveTimer, SigVccRetryTimer, SigVccRetryLimit, BrVccInactiveTimer, BrVccRetryTimer, BrVccRetryLimit, BrVccGr303Supp, BrVccOamStatus. localIwfNotConfigured(14) : Local IWF not Configured localIwfIdNotMatch(15): specified Local IWF not match localIwfStatus(16): this operation is not supported because of the status of Local IWF rmtIwfNotConfigured(17): Remote IWF Not Configured rmtIwfModeNotCompatible(18): the Mode of Remote IWF is not compatiable rmtIwfStatus(19): this operation is not support because of the Status of Remote IWF vccAlreadyConfigured(20): This VCC has been configured vccPvcCacReject(21): PVC Configuration rejected by Cac Reservation Function requiredFieldMissing(22): mandatory fields missing outOfResource(23): Atm Trunking Task or System out of resource for this configuration rowStatusError(24):Row Status Error with the SNMP command generalErrorUnspecified(25): all other unspecified failure cause. " ::= { returnCode 59 } sapphireIntfAddressFailReasonCode OBJECT-TYPE SYNTAX INTEGER { address-assign-ok(1), fail-Ilegal-IP-address(2), fail-not-match-InBandManagement-Switch-Cpu-IP-Address(3), fail-Switch-or-Cpu-IP-Address-unconfigured(4), fail-InBandManagement-IP-Address-unconfigured(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured." ::= { returnCode 60} chassisOverTempAlarmReasonCode OBJECT-TYPE SYNTAX INTEGER { set(1), clear(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of presence of chassis over temperature alarm." ::= { returnCode 61 } -- System Control Group sysControl saveConfiguration OBJECT-TYPE SYNTAX INTEGER { equipment(1), connections(2), routing(3), all(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "save configuration " ::= { sysControl 1 } upgradeSoftware OBJECT-TYPE SYNTAX INTEGER { upgrade(1), fallBack(2), forceUpgrade(3), forceFallBack(4), synchronize(5),-- backup sw ver sync abort(6),-- abort any ver control progress forceSynchronize(7),--similar to forceUpgrade/forceFallBack forceAbort(8) -- abort for forceUpgrade/forceFallBack } MAX-ACCESS read-write STATUS current DESCRIPTION "software load management" ::= { sysControl 2 } purgePvcConnections OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "purge PVC connections on indicated interface" ::= { sysControl 3 } purgeRoutingTable OBJECT-TYPE SYNTAX INTEGER { iispCbr(1), iispVbr(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "purge indicated routing table" ::= { sysControl 4 } resetPortStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the statistics counters for the given port Id (SSPP)" ::= { sysControl 5 } resetInterfaceStatistics OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the interface counters for the given port Id (SSPPCCC)" ::= { sysControl 6 } resetAllStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all port and interface statistics counters, accpets any integer value" ::= { sysControl 7 } upgradeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address for upgrade ftp server." ::= { sysControl 8 } upgradeAccountName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account name for access to upgrade ftp server." ::= { sysControl 9 } upgradeAccountPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account password for access to upgrade ftp server." ::= { sysControl 10 } upgradeCdromFile OBJECT-TYPE SYNTAX DisplayString (SIZE(79)) MAX-ACCESS read-write STATUS current DESCRIPTION "cdrom file path on upgrade ftp server to upgrade image library." ::= { sysControl 11 } upgradeLicenseKey OBJECT-TYPE SYNTAX DisplayString (SIZE(30)) MAX-ACCESS read-write STATUS current DESCRIPTION "software license key." ::= { sysControl 12 } upgradeSwCopyStatus OBJECT-TYPE SYNTAX INTEGER { noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the ftp software upgrade download. Status of the software upgrade. noActivity is the initial start state from boot-up. working is set while ftp'ing the upgrade. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an upgrade. If the state is doneWithError then upgradeSwErrorStatus will be set to reflect the type of error." ::= { sysControl 13 } upgradeSwErrorStatus OBJECT-TYPE SYNTAX INTEGER { none(1), userAbort(2), invalidIpAddress(3), invalidAccountName(4), invalidAccountPassword(5), invalidCdromFile(6), libraryCRCFail(7), unableToOpenLibraryFile(8), unableToLoadLibraryModule(9), unableToFindTaskSymbolName(10), failureInSpawningTask(11), failureInCreatingMsgQ(12), failureInCopyingDataFiles(13), failureToRemoveNextTree(14), unableToMakeNextTree(15), unableToOpenFile(16), unableToMakeFtpConnection(17), unableToWriteFile(18), unableToCompleteFtp(19), fileCRCFail(20), unableToWritePackageList(21), taskSuspendOrDead(22), unableToUpdateBackup(23), cpuAbort(24), failureToTakeSemaphore(25), failureToRemoveFallBackTree(26), unableToMakeFallBackTree(27) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the finish of the ftp software upgrade download. Set to a value 3-22 if upgradeSwCopyStatus is doneWithError. Set to none if upgradeSwCopyStatus is doneSuccessfully. Set to userAbort if upgradeSwCopyStatus is aborted." DEFVAL { none } ::= { sysControl 14 } systemSwCopy OBJECT-TYPE SYNTAX INTEGER { start(1), abort(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "start copy system files according to the profile. When upgradeSwCopyStatus is working, the start request will be ignored. Abort will have effect only when upgradeSwCopystatus is working." ::= { sysControl 15 } fwReleaseTable OBJECT-TYPE SYNTAX SEQUENCE OF FwReleaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of firmware inventory data" ::= { sysControl 16 } fwReleaseEntry OBJECT-TYPE SYNTAX FwReleaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for firmware inventory" INDEX { fwReleaseSlot } ::= { fwReleaseTable 1 } FwReleaseEntry ::= SEQUENCE { fwReleaseSlot INTEGER, fwReleaseRunning OCTET STRING, fwReleaseEpromVersion OCTET STRING, fwReleaseCurrentVersion OCTET STRING, fwReleaseNextVersion OCTET STRING, fwReleaseUpdate INTEGER, fwReleaseUpgrade INTEGER } fwReleaseSlot OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Physical slot location. Valid range is a number between 1 and 16." ::= { fwReleaseEntry 1 } fwReleaseRunning OBJECT-TYPE SYNTAX OCTET STRING (SIZE(15)) MAX-ACCESS read-only STATUS current DESCRIPTION "the firmware release currently running in a physical slot (e.g., 01.03.C01)." ::= { fwReleaseEntry 2 } fwReleaseEpromVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(9)) MAX-ACCESS read-only STATUS current DESCRIPTION "the version of the firmware located on the I/O card (e.g., 01.03.C01)." ::= { fwReleaseEntry 3 } fwReleaseCurrentVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(9)) MAX-ACCESS read-only STATUS current DESCRIPTION "the version of the firmware located in /scsi/current/io on the CPU disk drive (e.g., 01.03.C01)." ::= { fwReleaseEntry 4 } fwReleaseNextVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(9)) MAX-ACCESS read-only STATUS current DESCRIPTION "the version of the firmware located in /scsi/next/io on the CPU disk drive (e.g., 01.03.C01)." ::= { fwReleaseEntry 5 } fwReleaseUpdate OBJECT-TYPE SYNTAX INTEGER { activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive." ::= { fwReleaseEntry 6 } fwReleaseUpgrade OBJECT-TYPE SYNTAX INTEGER { eprom(1), current(2), next(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Update the fwReleaseCurrentVersion and the fwReleaseNextVersion variables by remapping the firmware files from the CPU disk drive." DEFVAL { eprom } ::= { fwReleaseEntry 7 } resetBridgeDomainStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resets bridge domain statistics." ::= { sysControl 17 } remoteRebootCommand OBJECT-TYPE SYNTAX INTEGER { ioCard1Reboot(1), ioCard2Reboot(2), ioCard3Reboot(3), ioCard4Reboot(4), ioCard5Reboot(5), ioCard6Reboot(6), ioCard7Reboot(7), ioCard8Reboot(8), ioCard9Reboot(9), ioCard10Reboot(10), ioCard11Reboot(11), ioCard12Reboot(12), ioCard13Reboot(13), ioCard14Reboot(14), ioCard15Reboot(15), ioCard16Reboot(16), allIOCardReboot(100), chassisReboot(101), backupCpuReboot(102), primaryCpuReboot(103), primaryCpuSwitchover(200) } MAX-ACCESS read-write STATUS current DESCRIPTION "type of reboot." ::= { sysControl 18 } resetFrLmiStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the frame relay LMI statistics counters for the given port Id (SSPPCCC)" ::= { sysControl 19 } removeConfigurationFiles OBJECT-TYPE SYNTAX INTEGER { all(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Removes the user configuration/connection files from the hard disk on the cpu." DEFVAL { all } ::= { sysControl 20 } systemFilesDirtyBitStatus OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask for system files: 0: all are clean 1: console.def 2: ecd.def 4: ssid.def 8: cnctn.db 16: iisp.cbr 32: iisp.vbr 64: spvc.db 128: vipr.cfg 256: fwc.def 512: vi.db 1024: iproute.db 2048: atmvuni.db" ::= { sysControl 21 } resetAtmIlmiStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the ATM ILMI statistics counters for the given channel Id (SSPPCCC)" ::= { sysControl 22 } resetImaGrpChannelStatistics OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the IMA Group Statistics counters for the given port Id (SSPPCCC)" ::= { sysControl 23 } oc3APSResetStats OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the oc3aps Group Statistics counters for the given port Id (SSPP)" ::= { sysControl 24 } resetsonetSectionStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the sonetSectionCurrent Statistics counters for the given port Id (SSPP)" ::= { sysControl 25 } resetsonetLineStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the sonetLineCurrent Statistics counters for the given port Id (SSPP)" ::= { sysControl 26 } resetsonetVTPathStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the sonetVTPathCurrent Statistics counters for the given port Id (SSPP)" ::= { sysControl 27 } viprVpnReset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the VPN statistics for VPN specified by (SSVV)" ::= { sysControl 28 } svcRetBackupStatus OBJECT-TYPE SYNTAX INTEGER { no-sync (1), sync-in-progress (2), fully-sync(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates backup status wrt SVC retention" ::= { sysControl 29 } resetsonetPathStatistics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the sonetPathCurrent Statistics counters for the given port Id (SSPP)" ::= { sysControl 30 } ambientTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ambient temperature in degree Celcius where the system is kept" ::= { sysControl 31 } remoteDbServerGroup OBJECT IDENTIFIER ::= {sysControl 32} remoteDbServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address for remote database server." ::= { remoteDbServerGroup 1 } remoteDbServerLogin OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account name for remote database server." ::= { remoteDbServerGroup 2 } remoteDbServerPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account password for remote database server." ::= { remoteDbServerGroup 3 } remoteDbServerDirectory OBJECT-TYPE SYNTAX DisplayString (SIZE(79)) MAX-ACCESS read-write STATUS current DESCRIPTION "directory on remote database server where to save/restore database files from." ::= { remoteDbServerGroup 4 } remoteDbCommand OBJECT-TYPE SYNTAX INTEGER { noOperation(1), remoteSave(2), remoteLoad(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "remote database operation." ::= { remoteDbServerGroup 5 } remoteDbOperationStatus OBJECT-TYPE SYNTAX INTEGER { noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of remote database command." ::= { remoteDbServerGroup 6 } remoteDbOperationErrorStatus OBJECT-TYPE SYNTAX INTEGER { none(0), unableToMakeFtpConnection(1), invalidDirectory(2), unableToOpenDatabaseFile(3), unableToCompleteFtp(4), databaseSanityFail(5), unableToUpdateBackup(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result at the finish of remote database operation." DEFVAL { none } ::= { remoteDbServerGroup 7 } stratumSyncSource OBJECT-TYPE SYNTAX INTEGER { lineTiming(1), compositeClock(2), freerun(3), t1BITS(4), e1ETSI(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clock source for the stratum card - lineTiming: must have slot and port specified in stratumPrimaryLineId. compositeClock: local clock must be available. " DEFVAL { lineTiming } ::= { stratumConfig 1 } stratumPrimaryLineId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Format SSPP (slot and port #'s) to be used when lineTiming is specified in stratumSyncSource." ::= { stratumConfig 2 } stratumSecondaryLineId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Format SSPP (slot and port #'s) to be used if the primary line has failed. Zeros imply that the stratum should switch to holdover mode instead." ::= { stratumConfig 3 } stratumLevel OBJECT-TYPE SYNTAX INTEGER { stratum3(1), stratum4(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the switching over to stratum 4 when stratum 3 is not possible." DEFVAL { stratum3 } ::= { stratumConfig 4 } stratumLineCommand OBJECT-TYPE SYNTAX INTEGER { gotoPrimaryLine(1), gotoSecondaryLine(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forces the stratum card to use one of the two specified lines as its clock source when the stratumSyncSource is lineTiming." ::= { stratumConfig 5 } stratumLineTimingStatus OBJECT-TYPE SYNTAX INTEGER { primaryLine(1), secondaryLine(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the source of the current clock." ::= { stratumConfig 6 } stratumMode OBJECT-TYPE SYNTAX INTEGER { synchronized3(1), synchronized4(2), holdover(3), freerun(4), cardRemoved(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the primary stratum card. synchronized3(1) stratum is synchronized with accuracy 4.6 x 10e-6 synchronized4(2) stratum is synchronized with accuracy 3.2 x 10e-5 holdover(3) an operating condition of a clock that has lost its controlling input and is using stored data acquired while in normal operation, to control its output freerun(4) an operating condition of the clock whose output signals are internally controlled cardRemoved(5) stratum removed " ::= { stratumConfig 7 } stratumBackupMode OBJECT-TYPE SYNTAX INTEGER { synchronized3(1), synchronized4(2), holdover(3), freerun(4), cardRemoved(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the backup stratum card. " ::= { stratumConfig 8 } stratumRefFailAction OBJECT-TYPE SYNTAX INTEGER { holdover(1), freerun(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines whether the stratum should switch to freerun or holdover on reference clock failure." DEFVAL { holdover } ::= { stratumConfig 9 } stratumPortStatus OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), noalarm(2), portAIS(3), portLOF(4), portLOS(5), portFOS(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the primary stratum card. portFOS indicates port frequency offset. " ::= { stratumConfig 10 } stratumBkupPortStatus OBJECT-TYPE SYNTAX INTEGER { unconfigured(1), noalarm(2), portAIS(3), portLOF(4), portLOS(5), portFOS(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the backup stratum card. portFOS indicates port frequency offset. " ::= { stratumConfig 11 } activeStratum OBJECT-TYPE SYNTAX INTEGER { stratumA(1), stratumB(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the backup stratum card." ::= { stratumConfig 12 } -- Cell Test specific objects cellTestIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index used for testing cell transfer. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { cellTest 1 } cellTestVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value for testing cell transfer to an I/O card. Valid range is a number between 0 and 4095. If the I/O card interface is not ATM, then this will always be zero." ::= { cellTest 2 } cellTestVcidB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Virtual Check Id for testing cell transfer to an I/O card. Valid range is a number between 0 and 65535. If the I/O card interface is frame relay, this field acts as DLCI and the valid range is a number between 0 and 1023. If the I/O card interface is circuit emulation, then this will always be 0." ::= { cellTest 3 } cellTestServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr-nrt2(2), vbr-nrt1(3), vbr-rt2(4), vbr-rt1(5), vbr-express(6), cbr4(7), cbr3(8), cbr2(9), cbr1(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service types for testing cell transfer" DEFVAL { ubr } ::= { cellTest 4 } cellTestConnType OBJECT-TYPE SYNTAX INTEGER { simplexTx(1), simplexRx(2), duplex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Connection types for testing cell transfer" DEFVAL { simplexTx } ::= { cellTest 5 } cellTestProtocol OBJECT-TYPE SYNTAX INTEGER { atm(1), frame-relay (2), hdlc(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol (interface type) on the I/O" DEFVAL { atm } ::= { cellTest 6 } cellTestPayLoadTx OBJECT-TYPE SYNTAX OCTET STRING (SIZE(88)) MAX-ACCESS read-write STATUS current DESCRIPTION "PayLoad to be transmitted on I/O interface" ::= { cellTest 7 } cellTestPayLoadRx OBJECT-TYPE SYNTAX OCTET STRING (SIZE(88)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last PayLoad received on I/O interface" ::= { cellTest 8 } cellTestAction OBJECT-TYPE SYNTAX INTEGER { send(1), send-10(2), setupconn(3), stop (4), clearTxStats(5), clearRxStats(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "PayLoad received on I/O interface" DEFVAL { stop } ::= { cellTest 9 } cellTestRxPduCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { cellTest 10 } cellTestTxPduCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted (Output Billing Count)" ::= { cellTest 11 } cellTestMismatchPduCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times Rx payload mismatched with Tx payload." ::= { cellTest 12 } cellTestStatus OBJECT-TYPE SYNTAX INTEGER { running(1), not-running(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a cellTest test is in progress or not." DEFVAL { not-running } ::= { cellTest 13 } cellTestVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "VUNI id for testing cell transfer to an I/O card. This field is valid only for ATM interface." ::= { cellTest 14 } -- System Information specific objects sysInfoTxOneCellTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total amount of cells within the transmit one cell pool." ::= { sysInfo 1 } sysInfoTxOneCellUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of cells currently being used within the transmit one cell pool." ::= { sysInfo 2 } sysInfoTxOneCellHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-water mark of cells used within the transmit one cell pool." ::= { sysInfo 3 } sysInfoRxOneCellTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total amount of cells within the receive one cell pool." ::= { sysInfo 4 } sysInfoRxOneCellUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of cells currently being used within the receive one cell pool." ::= { sysInfo 5 } sysInfoRxOneCellHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-water mark of cells used within the receive one cell pool." ::= { sysInfo 6 } sysInfoRxMultiCellTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total amount of multi-cells within the receive multi-cell pool." ::= { sysInfo 7 } sysInfoRxMultiCellUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of multi-cells currently being used within the receive multi-cell pool." ::= { sysInfo 8 } sysInfoRxMultiCellHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-water mark of multi-cells used within the receive multi-cell pool." ::= { sysInfo 9 } sysInfoMsgPoolTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total amount of messages within the message pool." ::= { sysInfo 10 } sysInfoMsgPoolUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of messages currently being used within the message pool." ::= { sysInfo 11 } sysInfoMsgPoolHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-water mark of messages used within the message pool." ::= { sysInfo 12 } sysInfoDiscFreeKBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of disc free space available in KB's." ::= { sysInfo 13 } sysInfoCpuUtilization1 OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "xx.yy% - cpuUtilization1 is the xx part of it." ::= { sysInfo 14 } sysInfoCpuUtilization2 OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "xx.yy% - cpuUtilization2 is the yy part of it." ::= { sysInfo 15 } sysInfoSysUptime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of time cpu has been up in seconds." ::= { sysInfo 16 } sysInfoBadCellRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad cells (BIP16) received so far." ::= { sysInfo 17 } sysInfoMisaligned OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of misaligned cells received so far." ::= { sysInfo 18 } sysInfoClockAErr OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Value is 1, TRUE, if the clock on backplane A is errored, otherwise, the value is 0, FALSE." ::= { sysInfo 19 } sysInfoClockBErr OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Value is 1, TRUE, if the clock on backplane B is errored, otherwise, the value is 0, FALSE." ::= { sysInfo 20 } sysInfoBIPAErr OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Value is 1, TRUE, if the cell circuit on backplane A is errored, otherwise, the value is 0, FALSE." ::= { sysInfo 21 } sysInfoBIPBErr OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Value is 1, TRUE, if the cell circuit on backplane B is errored, otherwise, the value is 0, FALSE." ::= { sysInfo 22 } sysInfoDiscTotalKBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of disc space available in KB's." ::= { sysInfo 23 } sysInfoRAMFreeKBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of RAM memory available for use in KB's." ::= { sysInfo 24 } sysInfoRAMTotalKBytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of RAM memory available on cpu card in KB's." ::= { sysInfo 25 } msgPoolViewTable OBJECT-TYPE SYNTAX SEQUENCE OF MsgPoolViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Msg Pools In the System, Used only for diagnostic purposes" ::= { sysInfo 26 } primaryCpuHwType OBJECT-TYPE SYNTAX INTEGER { notKnown(1), version1(2), version2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hardware version type of the primary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory." DEFVAL { notKnown } ::= { sysInfo 27 } secondaryCpuHwType OBJECT-TYPE SYNTAX INTEGER { notKnown(1), version1(2), version2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hardware version type of the secondary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MHz Saturn15 board supporting 64MB-256MB Memory." DEFVAL { notKnown } ::= { sysInfo 28 } msgPoolViewEntry OBJECT-TYPE SYNTAX MsgPoolViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of Msg Pool Table" INDEX { msgPoolViewIndex } ::= { msgPoolViewTable 1 } MsgPoolViewEntry ::= SEQUENCE { msgPoolViewIndex Integer32, msgPoolViewTskId Integer32, msgPoolViewTskName DisplayString, msgPoolViewMsgCmd Integer32 } msgPoolViewIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "It is the index of the MsgPool array for which the information is requested. Information about Msgs Which are not there in the free pool is returned.A msg is said to be out of the free pool by comparing the signature. The limit being the max number of msgs allowed on the system" ::= { msgPoolViewEntry 1 } msgPoolViewTskId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Task Id of the Sender of the Particular Msg, This will give the integer value, has to be converted to hex for comparison" ::= { msgPoolViewEntry 2} msgPoolViewTskName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Task Name of the Sender of the Particular Msg" ::= { msgPoolViewEntry 3} msgPoolViewMsgCmd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "msgCmd being sent by the sending Task" ::= { msgPoolViewEntry 4} sysInfoDiskCheck OBJECT-TYPE SYNTAX INTEGER { ok (1), error (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the checking status of the disk in CPU card. " ::= { sysInfo 29 } switchAlarmStatus OBJECT-TYPE SYNTAX INTEGER { notAvailable(1), none(2), minor(3), major(4), critical(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the alarm on the switch. notAvailable - The alarm status could not be retreived. none - No alarm is present. minor, major, critical - An alarm of the enumerated type is present" ::= { sysInfo 30 } -- Ethernet cache configuration group arp1Table OBJECT-TYPE SYNTAX SEQUENCE OF Arp1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ARP cache data." ::= { ethernetConfig 1 } arp1Entry OBJECT-TYPE SYNTAX Arp1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ARP cache." INDEX { arp1CardSlot, arp1BridgeGroupNum, arp1IpAddress } ::= { arp1Table 1 } Arp1Entry ::= SEQUENCE { arp1CardSlot INTEGER, arp1BridgeGroupNum INTEGER, arp1IpAddress IpAddress, arp1PhysicalAddr OCTET STRING, arp1EntryAge Integer32 } arp1CardSlot OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ethernet card is in." ::= { arp1Entry 1 } arp1BridgeGroupNum OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Group the entry belongs to." ::= { arp1Entry 2 } arp1IpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry IP address." ::= { arp1Entry 3 } arp1PhysicalAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Entry physical address." ::= { arp1Entry 4 } arp1EntryAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of cache entry." DEFVAL { 0 } ::= { arp1Entry 5 } arp2Table OBJECT-TYPE SYNTAX SEQUENCE OF Arp2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ARP cache data." ::= { ethernetConfig 2 } arp2Entry OBJECT-TYPE SYNTAX Arp2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for ARP cache." INDEX { arp2CardSlot, arp2BridgeGroupNum, arp2PhysicalAddr } ::= { arp2Table 1 } Arp2Entry ::= SEQUENCE { arp2CardSlot INTEGER, arp2BridgeGroupNum INTEGER, arp2PhysicalAddr OCTET STRING, arp2IpAddress IpAddress, arp2EntryAge Integer32 } arp2CardSlot OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ethernet card is in." ::= { arp2Entry 1 } arp2BridgeGroupNum OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Group the entry belongs to." ::= { arp2Entry 2 } arp2PhysicalAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry physical address." ::= { arp2Entry 3 } arp2IpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Entry IP address." ::= { arp2Entry 4 } arp2EntryAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of cache entry." DEFVAL { 0 } ::= { arp2Entry 5 } bridgeCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF BridgeCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of bridge cache data." ::= { ethernetConfig 3 } bridgeCacheEntry OBJECT-TYPE SYNTAX BridgeCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for bridge cache." INDEX { bridgeCacheCardSlot, bridgeCacheBridgeGroupNum, bridgeCachePhysicalAddr } ::= { bridgeCacheTable 1 } BridgeCacheEntry ::= SEQUENCE { bridgeCacheCardSlot INTEGER, bridgeCacheBridgeGroupNum INTEGER, bridgeCachePhysicalAddr OCTET STRING, bridgeCacheType INTEGER, bridgeCacheSourcePort INTEGER, bridgeCacheEntryAge Integer32 } bridgeCacheCardSlot OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot ethernet card is in." ::= { bridgeCacheEntry 1 } bridgeCacheBridgeGroupNum OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge Group the entry belongs to." ::= { bridgeCacheEntry 2 } bridgeCachePhysicalAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry physical address." ::= { bridgeCacheEntry 3 } bridgeCacheType OBJECT-TYPE SYNTAX INTEGER { learned(1), permanent(2), policy(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of Entry." DEFVAL { learned } ::= { bridgeCacheEntry 4 } bridgeCacheSourcePort OBJECT-TYPE SYNTAX INTEGER (1..75) MAX-ACCESS read-only STATUS current DESCRIPTION "Port entry was obtained from." ::= { bridgeCacheEntry 5 } bridgeCacheEntryAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of cache entry." ::= { bridgeCacheEntry 6 } -- Alarm card configuration group alarmStatusInputBitmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote status from external device. bit = 0 closed, bit = 1 open, LSB 15 bits represent 15 external inputs. MSB bit 15 is always 0." ::= { alarmConfig 1 } alarmStatusOutputBitmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "Control output for alarm card. bit = 0 deactivated, bit = 1 activated, LSB 4 bits represent 4 external outputs. Bit 0 through bit 3 is output 1 through 4 Control output 4 will be activated upon power failure." DEFVAL { 0 } ::= { alarmConfig 2 } alarmSeverityLevelBitmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm severity level. bit = 0 noAlarm, bit = 1 Alarm present, LSB 3 bits represent severity levels. bit 0 = Minor Alarm, bit 1 = Major Alarm, bit 2 = Critical Alarm." DEFVAL { 0 } ::= { alarmConfig 3 } alarmAcoStatusBitmap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Audio alarm status. bit = 0 No alarm cutoff, bit = 1 Alarm cutoff, LSB 3 bits represent audio alarms. bit 0 = Local alarm cutoff, bit 1 = remote alarm cutoff, bit 2 = composite alarm cutoff status." ::= { alarmConfig 4 } -- system test configuration group oamTest OBJECT IDENTIFIER ::= { sysTest 1 } oamTestIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { oamTest 1 } oamTestVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095." ::= { oamTest 2 } oamTestVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535." ::= { oamTest 3 } oamTestStatus OBJECT-TYPE SYNTAX INTEGER { not-running(1), running(2), successful(3), failure(4), timedout(5), waiting-for-response(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Inidcates the current status of oam test." DEFVAL { not-runnin } ::= { oamTest 4 } oamTestAction OBJECT-TYPE SYNTAX INTEGER { sendLoopback(1), sendContinuously(2), stopTest(3), resetTxCount(4), resetRxCount(5), resetMismatchCount(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test action to be performed." DEFVAL { sendLoopback } ::= { oamTest 5 } oamTestTxCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted." ::= { oamTest 6 } oamTestRxCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received." ::= { oamTest 7 } oamTestMismatchCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times Rx correlation tag is mismatched with the Tx correlation tag." ::= { oamTest 8 } oamTestLocationID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location ID of the ATM Node where the loopback is to occur." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'H } ::= { oamTest 9 } oamTestLoopbackType OBJECT-TYPE SYNTAX INTEGER { end-to-end(1), segment-endpoint(2), next-connection-point(3), specific-location(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account." DEFVAL { end-to-end } ::= { oamTest 10 } -- sysTest 2 oamActDeactTable OBJECT-TYPE SYNTAX SEQUENCE OF OamActDeactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of oam activate and deactivate functions" ::= { sysTest 2 } oamActDeactEntry OBJECT-TYPE SYNTAX OamActDeactEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of oam activate and deactivate" INDEX { oamActDeactIfB, oamActDeactVpiB, oamActDeactVciB} ::= { oamActDeactTable 1 } OamActDeactEntry ::= SEQUENCE { oamActDeactIfB IntfIndex, oamActDeactVpiB INTEGER, oamActDeactVciB INTEGER, oamActDeactFuncType INTEGER, oamActDeactDirFlow INTEGER, oamActDeactFlowType INTEGER, oamActDeactBlkSizeAB INTEGER, oamActDeactBlkSizeBA INTEGER, oamActDeactStsSrcPointEteCC INTEGER, oamActDeactStsSnkPointEteCC INTEGER, oamActDeactRsltPrevReq INTEGER, oamActDeactRowStatus RowStatus, oamActDeactStsSrcPointEtePM INTEGER, oamActDeactStsSnkPointEtePM INTEGER, oamActDeactStsSrcPointEtePMBR INTEGER, oamActDeactStsSnkPointEtePMBR INTEGER, oamActDeactBRBlockError INTEGER, oamActDeactBRLostInsertedCell INTEGER, oamActDeactBRMisInsertedCell INTEGER, oamActDeactStsSrcPointSegPM INTEGER, oamActDeactStsSnkPointSegPM INTEGER, oamActDeactStsSrcPointSegPMBR INTEGER, oamActDeactStsSnkPointSegPMBR INTEGER, oamActDeactStsSrcPointSegCC INTEGER, oamActDeactStsSnkPointSegCC INTEGER } oamActDeactIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for an OAM CC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { oamActDeactEntry 1 } oamActDeactVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value for an oam CC connection. Valid range is a number between 0 and 4095." ::= { oamActDeactEntry 2 } oamActDeactVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value for oam CC connection. Valid range is a number between 0 and 65535." ::= { oamActDeactEntry 3 } oamActDeactFuncType OBJECT-TYPE SYNTAX INTEGER { fpm-and-br(1), fpm-only(2), continuity-check(3), pmbr-and-cc(4), pm-and-cc(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "OAM Function type represents the OAM flow for activation or deactivattion for this connection. the possible function types activated in one connection are : fpm-and-br : forward performance monitoring/backward reporting fpm-only : forward performance monitoring continuity-check : continuity check pmbr-and-cc : forward performance monitoring/backward reporting and continuity check pm-and-cc : forward performance monitoring and continuity check" DEFVAL { continuity-check } ::= { oamActDeactEntry 4 } oamActDeactDirFlow OBJECT-TYPE SYNTAX INTEGER { towards-far-end(1), towards-near-end(2), both-way(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The direction in which cells will be transmitted." DEFVAL { towards-near-end } ::= { oamActDeactEntry 5 } oamActDeactFlowType OBJECT-TYPE SYNTAX INTEGER { end-to-end(1), segment(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Type." DEFVAL { end-to-end } ::= { oamActDeactEntry 6 } oamActDeactBlkSizeAB OBJECT-TYPE SYNTAX INTEGER { size128(1), size256(2), size512(3), size1024(4), size4096(5), size8192(6), size16384(7), size32768(8), size2048(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Block Size A-B represents the size of the block of user cells taken into consideration for performance monitoring in A-B direction." DEFVAL { size1024 } ::= { oamActDeactEntry 7 } oamActDeactBlkSizeBA OBJECT-TYPE SYNTAX INTEGER { size128(1), size256(2), size512(3), size1024(4), size4096(5), size8192(6), size16384(7), size32768(8), size2048(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Block Size A-B is the size of the block of user cells taken into consideration for performance monitoring in B-A direction." DEFVAL { size1024 } ::= { oamActDeactEntry 8 } oamActDeactStsSrcPointEteCC OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 9 } oamActDeactStsSnkPointEteCC OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 10 } oamActDeactRsltPrevReq OBJECT-TYPE SYNTAX INTEGER { denied(1), timedout(2), locResrcUnavl(3), oamUnsupported(4), reqCancelled(5), funcNotImplemented(6), none(7), successful(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Cause of Failure shows the reasons of failure of the last activation request on this connection form the local user." DEFVAL { none } ::= { oamActDeactEntry 11 } oamActDeactRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { oamActDeactEntry 12 } oamActDeactStsSrcPointEtePM OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 13} oamActDeactStsSnkPointEtePM OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 14 } oamActDeactStsSrcPointEtePMBR OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 15} oamActDeactStsSnkPointEtePMBR OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 16 } oamActDeactBRBlockError OBJECT-TYPE SYNTAX INTEGER (0..32768) MAX-ACCESS read-only STATUS current DESCRIPTION "Backware reporting Block error for PM connection. Valid range is a number between 0 and 32768." ::= { oamActDeactEntry 17 } oamActDeactBRLostInsertedCell OBJECT-TYPE SYNTAX INTEGER (0..32768) MAX-ACCESS read-only STATUS current DESCRIPTION "Backware reporting lost inserted cell for PM connection. Valid range is a number between 0 and 32768." ::= { oamActDeactEntry 18} oamActDeactBRMisInsertedCell OBJECT-TYPE SYNTAX INTEGER (0..32768) MAX-ACCESS read-only STATUS current DESCRIPTION "Backware reporting misinserted cell for PM connection. Valid range is a number between 0 and 32768." ::= { oamActDeactEntry 19} oamActDeactStsSrcPointSegPM OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 20} oamActDeactStsSnkPointSegPM OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 21} oamActDeactStsSrcPointSegPMBR OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 22} oamActDeactStsSnkPointSegPMBR OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 23 } oamActDeactStsSrcPointSegCC OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source point showed in the status portion displays the current status of Activation or Deactivation request for the source point " DEFVAL { deactivated } ::= { oamActDeactEntry 24 } oamActDeactStsSnkPointSegCC OBJECT-TYPE SYNTAX INTEGER { activated(1), deactivated(2), waitActConfirm(3), waitDeactConfirm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Sink point showed in the status portion displays the current status of Activation or Deactivation request for the sink point" DEFVAL { deactivated } ::= { oamActDeactEntry 25 } -- sysTest 3 oamLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF OamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of oam loopback functions" ::= { sysTest 3 } oamLoopbackEntry OBJECT-TYPE SYNTAX OamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of oam loop back" INDEX { oamLpbkIfB, oamLpbkVpiB, oamLpbkVciB} ::= { oamLoopbackTable 1 } OamLoopbackEntry ::= SEQUENCE { oamLpbkIfB IntfIndex, oamLpbkVpiB INTEGER, oamLpbkVciB INTEGER, oamLoopbackType INTEGER, oamLpbkLocationID OCTET STRING, oamLpbkAction INTEGER, oamLpbkStatus INTEGER, oamLpbkTxCount Integer32, oamLpbkRxCount Integer32, oamLpbkMismatchCount Integer32, oamLpbkTimeout INTEGER } oamLpbkIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index used for starting loopback test. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { oamLoopbackEntry 1 } oamLpbkVpiB OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI value under testing for oam loopback test. Valid range is a number between 0 and 4095." ::= { oamLoopbackEntry 2 } oamLpbkVciB OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI value under testing for oam loopback test. Valid range is a number between 0 and 65535." ::= {oamLoopbackEntry 3 } oamLoopbackType OBJECT-TYPE SYNTAX INTEGER { end-to-end(1), segment-endpoint(2), next-connection-point(3), specific-location(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "OAM Loopback type. Determines whether to send ete or segment loopback cell, and the value of location Id field in the cell. Only for specific-location value, user specified locationId field value taken into account." DEFVAL { end-to-end } ::= { oamLoopbackEntry 4 } oamLpbkLocationID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Location ID of the ATM Node where the loopback is to occur." DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'H } ::= { oamLoopbackEntry 5 } oamLpbkAction OBJECT-TYPE SYNTAX INTEGER { sendLoopbackOnce(1), sendLoopbackContinuously(2), stopTest(3), resetStats(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test action to be performed. endLoopbackContinuously is not used. " DEFVAL { sendLoopbackOnce } ::= { oamLoopbackEntry 6 } oamLpbkStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), waiting-for-response(2), successful(3), timedout(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Inidcates the current status of oam test." DEFVAL { inactive} ::= { oamLoopbackEntry 7} oamLpbkTxCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells transmitted." ::= { oamLoopbackEntry 8 } oamLpbkRxCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received." ::= { oamLoopbackEntry 9 } oamLpbkMismatchCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times Rx correlation tag is mismatched with the Tx correlation tag." ::= { oamLoopbackEntry 10 } oamLpbkTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of time out " ::= { oamLoopbackEntry 11 } -- Vipr Router Configuration Group viprRouterConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprRouterConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Router Instance Information" ::= { viprConfig 1 } viprRouterConfigEntry OBJECT-TYPE SYNTAX ViprRouterConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " definition for VIPR Route instance attributes" INDEX { viprSlot, viprRouterId } ::= { viprRouterConfigTable 1 } ViprRouterConfigEntry ::= SEQUENCE { viprSlot Integer32, viprRouterId INTEGER, viprRouterName DisplayString, viprRouterNoOfInterfaces INTEGER, viprRouterNoOfRoutes INTEGER, viprRouterAdminStatus INTEGER, viprRouterOperStatus INTEGER, viprRouterInitTmr Integer32, viprRouterDisabWarnTmr Integer32, viprRouterShutDwnWarnTmr Integer32, viprRouterDisableWarning INTEGER, viprRouterDisableReason INTEGER, viprRouterRowStatus RowStatus } viprSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot number of the Virtual Router card (SS)" ::= { viprRouterConfigEntry 1 } viprRouterId OBJECT-TYPE SYNTAX INTEGER(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique Id for the Router Instance in a router card" ::= { viprRouterConfigEntry 2 } viprRouterName OBJECT-TYPE SYNTAX DisplayString (SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ASCII name of the Router Instance" ::= { viprRouterConfigEntry 3 } viprRouterNoOfInterfaces OBJECT-TYPE SYNTAX INTEGER (1..99) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the no of interfaces defined in the Router Instance" DEFVAL { 1 } ::= { viprRouterConfigEntry 4 } viprRouterNoOfRoutes OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the no of static routes defined in the Router Instance" DEFVAL { 1 } ::= { viprRouterConfigEntry 5 } viprRouterAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the various X.731 states the Router state machine can take Administartively" DEFVAL { outOfService } ::= { viprRouterConfigEntry 6 } viprRouterOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the various X.731 states the Router state machine can take operationally" DEFVAL { outOfService } ::= { viprRouterConfigEntry 7 } viprRouterInitTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state." DEFVAL { 192 } ::= { viprRouterConfigEntry 8 } viprRouterDisabWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state." DEFVAL { 36000 } ::= { viprRouterConfigEntry 9 } viprRouterShutDwnWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state." DEFVAL { 36000 } ::= { viprRouterConfigEntry 10 } viprRouterDisableWarning OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable when disabled will mask all the warning messages." DEFVAL { enabled } ::= { viprRouterConfigEntry 11 } viprRouterDisableReason OBJECT-TYPE SYNTAX INTEGER { none(1), manual(2), automatic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the reason why the Router in the unlocked-Disabled state." DEFVAL { none } ::= { viprRouterConfigEntry 12 } viprRouterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { viprRouterConfigEntry 13 } -- Vipr Interface Configuration Group viprIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Interface Config Information" ::= { viprConfig 2 } viprIntfConfigEntry OBJECT-TYPE SYNTAX ViprIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " definition for VIPR interface attributes" INDEX { viprSlot, viprRouterId, viprIntfId } ::= { viprIntfConfigTable 1 } ViprIntfConfigEntry ::= SEQUENCE { viprIntfId Integer32, viprIntfIPAddress IpAddress, viprIntfIPNetMask IpAddress, viprIntfAdminStatus INTEGER, viprIntfOperStatus INTEGER, viprIntfInitTmr Integer32, viprIntfDisabWarnTmr Integer32, viprIntfShutDwnWarnTmr Integer32, viprIntfDisableWarning INTEGER, viprIntfDisableReason INTEGER, viprIntfRipVersion INTEGER, viprIntfRipMode INTEGER, viprIntfRowStatus RowStatus, viprIntfRipLineType INTEGER, viprIntfAuthPasswd DisplayString } viprIntfId OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique Id for the Interface in a router instance" ::= { viprIntfConfigEntry 1 } viprIntfIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the entrprise network to which the interface is attached to" ::= { viprIntfConfigEntry 2 } viprIntfIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Subnet Mask of the entrprise network to which the interface is attached to" ::= { viprIntfConfigEntry 3 } viprIntfAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the various X.731 states the Interfce statemachine can take Administratively" DEFVAL { outOfService } ::= { viprIntfConfigEntry 4 } viprIntfOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the various X.731 states the Interfce statemachine can take operationally" DEFVAL { outOfService } ::= { viprIntfConfigEntry 5 } viprIntfInitTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state." DEFVAL { 192 } ::= { viprIntfConfigEntry 6 } viprIntfDisabWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state." DEFVAL { 18000 } ::= { viprIntfConfigEntry 7 } viprIntfShutDwnWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state." DEFVAL { 18000 } ::= { viprIntfConfigEntry 8 } viprIntfDisableWarning OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable when disabled will mask all the Disable warning messages." DEFVAL { enabled } ::= { viprIntfConfigEntry 9 } viprIntfDisableReason OBJECT-TYPE SYNTAX INTEGER { none(1), intfDisabled(2), routDisabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the reason why the Interface in the unlocked-Disabled state." DEFVAL { none } ::= { viprIntfConfigEntry 10 } viprIntfRipVersion OBJECT-TYPE SYNTAX INTEGER { version-1(1), version-2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the version of RIP that interface supports." DEFVAL { version-1 } ::= { viprIntfConfigEntry 11 } viprIntfRipMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), active(2), passive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the mode in which RIP protocol runs." DEFVAL { disabled } ::= { viprIntfConfigEntry 12 } viprIntfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { viprIntfConfigEntry 13 } viprIntfRipLineType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), multicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the line type when the RIP version is 2. When the RIP version is 1, the RIP line type will be set to broadcast(1)." DEFVAL { multicast } ::= { viprIntfConfigEntry 14 } viprIntfAuthPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication password for RIP version 2" ::= { viprIntfConfigEntry 15 } -- Vipr Sub Channel Configuration Group viprSubChnlConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprSubChnlConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Sub Channel Config Information" ::= { viprConfig 3 } viprSubChnlConfigEntry OBJECT-TYPE SYNTAX ViprSubChnlConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " definition for VIPR sub channel attributes" INDEX { viprSlot, viprRouterId, viprIntfId, viprSubChnlId } ::= { viprSubChnlConfigTable 1 } ViprSubChnlConfigEntry ::= SEQUENCE { viprSubChnlId Integer32, viprSubChnlIntfIndex IntfIndex, viprSubChnlTrafficType INTEGER, viprSubChnlLlcEncapType INTEGER, viprSubChnlMacEncapType INTEGER, viprSubChnlTosFeature INTEGER, viprSubChnlTosValue INTEGER, viprSubChnlTosMask INTEGER, viprSubChnlVpiDlci INTEGER, viprSubChnlVci INTEGER, viprSubChnlSarType INTEGER, viprSubChnlServiceType INTEGER, viprSubChnlFwdErrCorrection INTEGER, viprSubChnlInterworkingType INTEGER, viprSubChnlFrameSize Integer32, viprSubChnlComBurstSize Integer32, viprSubChnlExcessBurstSize Integer32, viprSubChnlCommitedInfoRate Integer32, viprSubChnlTimeInterval INTEGER, viprSubChnlAtmPeakCellRate Integer32, viprSubChnlAtmSustainedCellRate Integer32, viprSubChnlAtmMaxBurstSize Integer32, viprSubChnlFrPeakCellRate Integer32, viprSubChnlFrSustainedCellRate Integer32, viprSubChnlFrMaxBurstSize Integer32, viprSubChnlFlowType INTEGER, viprSubChnlAdminStatus INTEGER, viprSubChnlOperStatus INTEGER, viprSubChnlInitTmr Integer32, viprSubChnlDisabWarnTmr Integer32, viprSubChnlShutDwnWarnTmr Integer32, viprSubChnlDisableWarning INTEGER, viprSubChnlDisableReason INTEGER, viprSubChnlRowStatus RowStatus, viprSubChnlImIpAddr IpAddress, viprSubChnlImMask IpAddress, viprSubChnlViB INTEGER ,viprSubChnlVUNIB INTEGER ,viprSubChnlTrafficShaping INTEGER, viprSubChnlAtmOamStatus INTEGER } viprSubChnlId OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique Id for the sub channel in the interface" ::= { viprSubChnlConfigEntry 1 } viprSubChnlIntfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the TosValue, TosMask pair" ::= { viprSubChnlConfigEntry 2 } viprSubChnlTrafficType OBJECT-TYPE SYNTAX INTEGER{ atm(1), fR(2), bridge(3), routing(4), inband(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex" DEFVAL { atm } ::= { viprSubChnlConfigEntry 3 } viprSubChnlLlcEncapType OBJECT-TYPE SYNTAX INTEGER{ vc(1), llcSnap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation technique used in making IP packet to ATM cell" DEFVAL { none } ::= { viprSubChnlConfigEntry 4 } viprSubChnlMacEncapType OBJECT-TYPE SYNTAX INTEGER{ macHdr(1), noMacHdr(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation technique used in making IP packet to ATM cell" DEFVAL { none } ::= { viprSubChnlConfigEntry 5 } viprSubChnlTosFeature OBJECT-TYPE SYNTAX INTEGER{ disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allow the user to set the TOS values or not" DEFVAL { 1 } ::= { viprSubChnlConfigEntry 6 } viprSubChnlTosValue OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in this sub channel" DEFVAL { 255 } ::= { viprSubChnlConfigEntry 7 } viprSubChnlTosMask OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of Service mask" DEFVAL { 255 } ::= { viprSubChnlConfigEntry 8 } viprSubChnlVpiDlci OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The VPI/DLCI value of the connection" ::= { viprSubChnlConfigEntry 9 } viprSubChnlVci OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The VCI value of the connection" ::= { viprSubChnlConfigEntry 10 } viprSubChnlSarType OBJECT-TYPE SYNTAX INTEGER { aal5(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SAR Type supported for the connection" DEFVAL { aal5 } ::= { viprSubChnlConfigEntry 11 } viprSubChnlServiceType OBJECT-TYPE SYNTAX INTEGER { gold(1), silver(2), bronze(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Service types that are supported" DEFVAL { gold } ::= { viprSubChnlConfigEntry 12 } viprSubChnlFwdErrCorrection OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4), autoHiQ(5), auto(6), autoLoQ(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Forward error correction to be used" DEFVAL { none } ::= { viprSubChnlConfigEntry 13 } viprSubChnlInterworkingType OBJECT-TYPE SYNTAX INTEGER { frf8(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Encapsulation type used for Frame relay subchannels" DEFVAL { frf8 } ::= { viprSubChnlConfigEntry 14 } viprSubChnlFrameSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction (out of the frame relay UNI)." DEFVAL { 19200 } ::= { viprSubChnlConfigEntry 15 } viprSubChnlComBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { viprSubChnlConfigEntry 16 } viprSubChnlExcessBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 45000000 } ::= { viprSubChnlConfigEntry 17 } viprSubChnlCommitedInfoRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in the ingress direction (into the frame relay UNI)." DEFVAL { 0 } ::= { viprSubChnlConfigEntry 18 } viprSubChnlTimeInterval OBJECT-TYPE SYNTAX INTEGER(64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { viprSubChnlConfigEntry 19 } viprSubChnlAtmPeakCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 20 } viprSubChnlAtmSustainedCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 21 } viprSubChnlAtmMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 22 } viprSubChnlFrPeakCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 23 } viprSubChnlFrSustainedCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 24 } viprSubChnlFrMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 25 } viprSubChnlFlowType OBJECT-TYPE SYNTAX INTEGER { duplex(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of flow" DEFVAL { duplex } ::= { viprSubChnlConfigEntry 26 } viprSubChnlAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the various X.731 states the Sub Channel state machine can take Administartively" DEFVAL { outOfService } ::= { viprSubChnlConfigEntry 27 } viprSubChnlOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the various X.731 states the Sub Channel state machine can take Operationally" DEFVAL { outOfService } ::= { viprSubChnlConfigEntry 28 } viprSubChnlInitTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state." DEFVAL { 192 } ::= { viprSubChnlConfigEntry 29 } viprSubChnlDisabWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state." DEFVAL { 18000 } ::= { viprSubChnlConfigEntry 30 } viprSubChnlShutDwnWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state." DEFVAL { 18000 } ::= { viprSubChnlConfigEntry 31 } viprSubChnlDisableWarning OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable when disabled will mask all the Disable warning messages." DEFVAL { enabled } ::= { viprSubChnlConfigEntry 32 } viprSubChnlDisableReason OBJECT-TYPE SYNTAX INTEGER { none(1), intfDisabled(2), routDisabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the reason why the SubChnl in the unlocked-Disabled state." DEFVAL { none } ::= { viprSubChnlConfigEntry 33 } viprSubChnlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { viprSubChnlConfigEntry 34 } viprSubChnlImIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "inband management IpAddr" ::= { viprSubChnlConfigEntry 35 } viprSubChnlImMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "inband management Mask" ::= { viprSubChnlConfigEntry 36 } viprSubChnlViB OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The viB value of the connection" ::= { viprSubChnlConfigEntry 37 } viprSubChnlVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The VUNIB value of the connection" ::= { viprSubChnlConfigEntry 38 } viprSubChnlTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Traffic Shaping Support in the A2B direction for outgoing ATM connections." DEFVAL { disabled } ::= { viprSubChnlConfigEntry 39 } viprSubChnlAtmOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2), end-Seg-Pt(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end point, therefore it will respond to AIS/RDI. End-Seg-Pt: Connection endPoint that is also a segment endPoint." DEFVAL { unsupp } ::= { viprSubChnlConfigEntry 40 } -- Vipr Route Table viprRouteConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr static route Config Information" ::= { viprConfig 4 } viprRouteConfigEntry OBJECT-TYPE SYNTAX ViprRouteConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition for Vipr static route attributes" INDEX { viprSlot, viprRouterId, viprRouteId } ::= { viprRouteConfigTable 1 } ViprRouteConfigEntry ::= SEQUENCE { viprRouteId Integer32, viprRouteIPAddress IpAddress, viprRouteIPNetMask IpAddress, viprRouteDestAddress IpAddress, viprRouteGatewayAddress IpAddress, viprRouteServiceType INTEGER, viprRouteMetric Integer32, viprRouteAdminStatus INTEGER, viprRouteOperStatus INTEGER, viprRouteInitTmr Integer32, viprRouteDisabWarnTmr Integer32, viprRouteShutDwnWarnTmr Integer32, viprRouteDisableWarning INTEGER, viprRouteDisableReason INTEGER, viprRouteRowStatus RowStatus, viprRouteDestMask IpAddress } viprRouteId OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique Id to the routing table entry" ::= { viprRouteConfigEntry 1 } viprRouteIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the host/network in the route entry" ::= { viprRouteConfigEntry 2 } viprRouteIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Subnet Mask for the route entry to identify whether the route entry is a host or network" ::= { viprRouteConfigEntry 3 } viprRouteDestAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the host/network in the route entry" ::= { viprRouteConfigEntry 4 } viprRouteGatewayAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Gateway" ::= { viprRouteConfigEntry 5 } viprRouteServiceType OBJECT-TYPE SYNTAX INTEGER { gold(1), silver(2), bronze(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Service types that are supported" DEFVAL { gold } ::= { viprRouteConfigEntry 6 } viprRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "A scalar value for user-supplied static route metric values. " ::= { viprRouteConfigEntry 7 } viprRouteAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the various X.731 states the Route state machine can take Administratively" DEFVAL { outOfService } ::= { viprRouteConfigEntry 8 } viprRouteOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(1), inService(2), unlocked-Init(3), unlocked-Disable(4), locked-Shutting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the various X.731 states the Route state machine can take Operationally" DEFVAL { outOfService } ::= { viprRouteConfigEntry 9 } viprRouteInitTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state." DEFVAL { 192 } ::= { viprRouteConfigEntry 10 } viprRouteDisabWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable state." DEFVAL { 18000 } ::= { viprRouteConfigEntry 11 } viprRouteShutDwnWarnTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state." DEFVAL { 18000 } ::= { viprRouteConfigEntry 12 } viprRouteDisableWarning OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable when disabled will mask all the Disable warning messages." DEFVAL { enabled } ::= { viprRouteConfigEntry 13 } viprRouteDisableReason OBJECT-TYPE SYNTAX INTEGER { none(1), intfDisabled(2), routDisabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the reason why the Route in the unlocked-Disabled state." DEFVAL { none } ::= { viprRouteConfigEntry 14 } viprRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { viprRouteConfigEntry 15 } viprRouteDestMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Mask of the host/network in the route entry" ::= { viprRouteConfigEntry 16 } -- Vipr Routing Table viprRoutingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprRoutingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr routes Config Information" ::= { viprConfig 5 } viprRoutingConfigEntry OBJECT-TYPE SYNTAX ViprRoutingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition for Vipr route attributes" INDEX { viprSlot, viprRouterId, viprRoutingCommand, viprRoutingIndex } ::= { viprRoutingConfigTable 1 } ViprRoutingConfigEntry ::= SEQUENCE { viprRoutingCommand INTEGER, viprRoutingIPAddress IpAddress, viprRoutingIPNetMask IpAddress, viprRoutingDestAddress IpAddress, viprRoutingGatewayAddress IpAddress, viprRoutingServiceType INTEGER, viprRoutingType INTEGER, viprRoutingMetric Integer32, viprRoutingDestMask IpAddress, viprRoutingAge Integer32, viprRoutingIndex Integer32 } viprRoutingCommand OBJECT-TYPE SYNTAX INTEGER { start(1), more(2), abort(3), retrieve(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Routing table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries" ::= { viprRoutingConfigEntry 1 } viprRoutingIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the host/network in the route entry" ::= { viprRoutingConfigEntry 2 } viprRoutingIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Subnet Mask for the route entry to identify whether the route entry is a host or network" ::= { viprRoutingConfigEntry 3 } viprRoutingDestAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the host/network in the route entry" ::= { viprRoutingConfigEntry 4 } viprRoutingGatewayAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Gateway" ::= { viprRoutingConfigEntry 5 } viprRoutingServiceType OBJECT-TYPE SYNTAX INTEGER { gold(1), silver(2), bronze(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Service types that are supported" DEFVAL { gold } ::= { viprRoutingConfigEntry 6 } viprRoutingType OBJECT-TYPE SYNTAX INTEGER { stat(1), rip(2), ospf(3), intf(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Route types supported by the RS Card." DEFVAL { intf } ::= { viprRoutingConfigEntry 7 } viprRoutingMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Path cost" ::= { viprRoutingConfigEntry 8 } viprRoutingDestMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address Mask of the host/network in the route entry" ::= { viprRoutingConfigEntry 9 } viprRoutingAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of the routing entry" ::= { viprRoutingConfigEntry 10 } viprRoutingIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to the routing entry" ::= { viprRoutingConfigEntry 11 } -- Vipr ARP Table viprArpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprArpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Arp Table Information" ::= { viprConfig 6 } viprArpConfigEntry OBJECT-TYPE SYNTAX ViprArpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition for Vipr Arp Table attributes" INDEX { viprSlot, viprRouterId, viprArpCommand , viprArpIndex} ::= { viprArpConfigTable 1 } ViprArpConfigEntry ::= SEQUENCE { viprArpCommand INTEGER, viprArpIPAddress IpAddress, viprArpHwAddress OCTET STRING, viprArpEntryAge Integer32, viprArpInterfaceIPAddress IpAddress, viprArpInterfaceIPMask IpAddress, viprArpInterfaceServiceType INTEGER, viprArpIndex Integer32 } viprArpCommand OBJECT-TYPE SYNTAX INTEGER { start(1), more(2), abort(3), retrieve(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP table request command Set to start to initiate the caching of first 15 entries Set to more to initiate the caching of next 15 entries Set to abort to reset the counter in I/O card Set to retrieve in order to get the entries" ::= { viprArpConfigEntry 1 } viprArpIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the host/network" ::= { viprArpConfigEntry 2 } viprArpHwAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware address of the host/network" ::= { viprArpConfigEntry 3 } viprArpEntryAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of cache entry." ::= { viprArpConfigEntry 4 } viprArpInterfaceIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface IP address through which it is learned" ::= { viprArpConfigEntry 5 } viprArpInterfaceIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface IP address Mask" ::= { viprArpConfigEntry 6 } viprArpInterfaceServiceType OBJECT-TYPE SYNTAX INTEGER { gold(1), silver(2), bronze(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Service type of the interface through which the ARP table is learned" DEFVAL { gold } ::= { viprArpConfigEntry 7 } viprArpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index to the Arp table" ::= { viprArpConfigEntry 8 } -- Vipr PING Table viprPingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprPingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Ping Table Information" ::= { viprConfig 7 } viprPingConfigEntry OBJECT-TYPE SYNTAX ViprPingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition for Vipr Ping Table attributes" INDEX { viprSlot, viprRouterId, ipAddr } ::= { viprPingConfigTable 1 } ViprPingConfigEntry ::= SEQUENCE { ipAddr IpAddress, pingStatus INTEGER } ipAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the host/network to be echoed" ::= { viprPingConfigEntry 1 } pingStatus OBJECT-TYPE SYNTAX INTEGER { alive(1), not-Alive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The response value - Alive/Not Alive" ::= { viprPingConfigEntry 2 } -- Vipr Router RIP Update Interval per Slot viprRipConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprRipConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Vipr Rip Update Interval for each card" ::= { viprConfig 8 } viprRipConfigEntry OBJECT-TYPE SYNTAX ViprRipConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of Rip Update attributes" INDEX { viprSlot } ::= { viprRipConfigTable 1 } ViprRipConfigEntry ::= SEQUENCE { viprRipUpdateInt INTEGER } viprRipUpdateInt OBJECT-TYPE SYNTAX INTEGER { lowUpdateInt(8), mediumUpdateInt(16), normalUpdateInt(30) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the Rip Update Interval used by the RIP protocol to transmit packets. The unit is in seconds. The default is 30 seconds and user can change it to 8 or 16 seconds for a route server card. The value will apply to all VPN's in a route server card. But different route server cards in different slots can have separate values for Rip Update Interval" DEFVAL { normalUpdateInt } ::= { viprRipConfigEntry 1 } -- VPN level statistics will be on the port level statistics. viprVpnStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprVpnStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics collected per vpn based" ::= { equipStatistics 9 } viprVpnStatsEntry OBJECT-TYPE SYNTAX ViprVpnStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics collected per vpn based" INDEX { viprSlot, viprRouterId } ::= { viprVpnStatsTable 1 } ViprVpnStatsEntry ::= SEQUENCE { viprVpnStatsTimer Integer32, viprVpnStatsIcmpOutEchoRPs Integer32, viprVpnStatsIcmpOutDestURs Integer32, viprVpnStatsIcmpOutSrcQ Integer32, viprVpnStatsIcmpOutRedirects Integer32, viprVpnStatsIcmpOutEchoRQs Integer32, viprVpnStatsIcmpOutTimeXs Integer32, viprVpnStatsIcmpOutParamps Integer32, viprVpnStatsIcmpOutTimeRQs Integer32, viprVpnStatsIcmpOutTimeRPs Integer32, viprVpnStatsIcmpOutInfoRQs Integer32, viprVpnStatsIcmpOutInfoRPs Integer32, viprVpnStatsIcmpOutMaskRQs Integer32, viprVpnStatsIcmpOutMaskRPs Integer32, viprVpnStatsIcmpOutErrors Integer32, viprVpnStatsIcmpInErrors Integer32, viprVpnStatsIcmpInEchoRQs Integer32, viprVpnStatsIcmpInAddrMasks Integer32, viprVpnStatsIcmpInAddrMaskReps Integer32, viprVpnStatsIcmpInEchoReps Integer32, viprVpnStatsIcmpInDestUnreachs Integer32, viprVpnStatsIcmpInSrcQuenchs Integer32, viprVpnStatsIcmpInTimeExcds Integer32, viprVpnStatsIcmpInParamProbs Integer32, viprVpnStatsIcmpInTimeStamps Integer32, viprVpnStatsIcmpInTimeStampsReps Integer32 } viprVpnStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " A timeout value in which the RS Module must reply to statistics requests." ::= { viprVpnStatsEntry 1 } viprVpnStatsIcmpOutEchoRPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Echo Reply" ::= { viprVpnStatsEntry 2 } viprVpnStatsIcmpOutDestURs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Destination unreachable" ::= { viprVpnStatsEntry 3} viprVpnStatsIcmpOutSrcQ OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Source Quenches" ::= { viprVpnStatsEntry 4 } viprVpnStatsIcmpOutRedirects OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Redirect message type" ::= { viprVpnStatsEntry 5} viprVpnStatsIcmpOutEchoRQs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Echo Requests" ::= { viprVpnStatsEntry 6 } viprVpnStatsIcmpOutTimeXs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time exceeded" ::= { viprVpnStatsEntry 7} viprVpnStatsIcmpOutParamps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Parameter problem" ::= { viprVpnStatsEntry 8 } viprVpnStatsIcmpOutTimeRQs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp requests" ::= { viprVpnStatsEntry 9 } viprVpnStatsIcmpOutTimeRPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp replies" ::= { viprVpnStatsEntry 10 } viprVpnStatsIcmpOutInfoRQs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Information Request" ::= { viprVpnStatsEntry 11 } viprVpnStatsIcmpOutInfoRPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Echo Reply" ::= { viprVpnStatsEntry 12 } viprVpnStatsIcmpOutMaskRQs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mask Request" ::= { viprVpnStatsEntry 13 } viprVpnStatsIcmpOutMaskRPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mask Reply" ::= { viprVpnStatsEntry 14} viprVpnStatsIcmpOutErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "unrecognized ICMP type" ::= { viprVpnStatsEntry 15 } viprVpnStatsIcmpInErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "error in received icmp message" ::= { viprVpnStatsEntry 16 } viprVpnStatsIcmpInEchoRQs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received echo request" ::= { viprVpnStatsEntry 17 } viprVpnStatsIcmpInAddrMasks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received mask request" ::= { viprVpnStatsEntry 18 } viprVpnStatsIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received mask reply" ::= { viprVpnStatsEntry 19 } viprVpnStatsIcmpInEchoReps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received echo replies" ::= { viprVpnStatsEntry 20 } viprVpnStatsIcmpInDestUnreachs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received destination unreacheable message" ::= { viprVpnStatsEntry 21 } viprVpnStatsIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received source quench" ::= { viprVpnStatsEntry 22 } viprVpnStatsIcmpInTimeExcds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received time exceeded message" ::= { viprVpnStatsEntry 23 } viprVpnStatsIcmpInParamProbs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received parameter problem message" ::= { viprVpnStatsEntry 24 } viprVpnStatsIcmpInTimeStamps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received time stamp request" ::= { viprVpnStatsEntry 25 } viprVpnStatsIcmpInTimeStampsReps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "received time stamp replies" ::= { viprVpnStatsEntry 26 } -- Interface level statistics that will be based on per CID. viprStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table which holds viprStatsEntry data." ::= { intfStatistics 10 } viprStatsEntry OBJECT-TYPE SYNTAX ViprStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table entry for VPN related statistics information." INDEX { viprSlot, viprRouterId, viprIntfId, viprSubChnlId, viprSubChnlIntfIndex, viprSubChnlVpiDlci, viprSubChnlVci, viprSubChnlTrafficType } ::= { viprStatsTable 1 } ViprStatsEntry ::= SEQUENCE { viprStatsReset INTEGER, viprStatsPacketsRxHi Integer32, viprStatsPacketsRxLo Integer32, viprStatsPacketsTxHi Integer32, viprStatsPacketsTxLo Integer32, viprStatsMismatchCrcHi Integer32, viprStatsMismatchCrcLo Integer32, viprStatsInsufficientPcktsHi Integer32, viprStatsInsufficientPcktsLo Integer32, viprStatsExceedAal5CellsHi Integer32, viprStatsExceedAal5CellsLo Integer32, viprStatsPrototypeErrorsHi Integer32, viprStatsPrototypeErrorsLo Integer32, viprStatsArpProtoRxHi Integer32, viprStatsArpProtoRxLo Integer32, viprStatsIPInHdrErrorsHi Integer32, viprStatsIPInHdrErrorsLo Integer32, viprStatsIPInAddrErrorsHi Integer32, viprStatsIPInAddrErrorsLo Integer32 } viprStatsReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " A SNMP set action to reset VPN related statistics info." ::= { viprStatsEntry 1 } viprStatsPacketsRxHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Good packets received from the backplane" ::= { viprStatsEntry 2 } viprStatsPacketsRxLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Good packets received from the backplane" ::= { viprStatsEntry 3 } viprStatsPacketsTxHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packets transmitted to the backplane" ::= { viprStatsEntry 4 } viprStatsPacketsTxLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packets transmitted to the backplane" ::= { viprStatsEntry 5 } viprStatsMismatchCrcHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packets received has been dropped due to a mismached CRC" ::= { viprStatsEntry 6 } viprStatsMismatchCrcLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packets received has been dropped due to a mismached CRC" ::= { viprStatsEntry 7 } viprStatsInsufficientPcktsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packet received length is greater than the number of cells received" ::= { viprStatsEntry 8 } viprStatsInsufficientPcktsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "packet received length is greater than the number of cells received" ::= { viprStatsEntry 9 } viprStatsExceedAal5CellsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells received is greater than the actual length of the aal5" ::= { viprStatsEntry 10 } viprStatsExceedAal5CellsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of cells received is greater than the actual length of the aal5" ::= { viprStatsEntry 11 } viprStatsPrototypeErrorsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "unrecognized encapsulation type" ::= { viprStatsEntry 12 } viprStatsPrototypeErrorsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "unrecognized encapsulation type" ::= { viprStatsEntry 13 } viprStatsArpProtoRxHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP received" ::= { viprStatsEntry 14 } viprStatsArpProtoRxLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP received" ::= { viprStatsEntry 15 } viprStatsIPInHdrErrorsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP packeted received has a bad header" ::= { viprStatsEntry 16 } viprStatsIPInHdrErrorsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP packeted received has a bad header" ::= { viprStatsEntry 17 } viprStatsIPInAddrErrorsHi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP packeted received has a bad IP Address" ::= { viprStatsEntry 18 } viprStatsIPInAddrErrorsLo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP packeted received has a bad IP Address" ::= { viprStatsEntry 19 } -- SubChannel level statistics that will be based on per CID. viprSubChnlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ViprSubChnlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table which holds viprSubChnlStatsEntry data." ::= { connectionStatistics 17 } viprSubChnlStatsEntry OBJECT-TYPE SYNTAX ViprSubChnlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table entry that contains IP interface sub channel statistics." INDEX { viprSlot, viprRouterId, viprIntfId, viprSubChnlId, viprSubChnlIntfIndex, viprSubChnlVpiDlci, viprSubChnlVci, viprSubChnlTrafficType } ::= { viprSubChnlStatsTable 1 } ViprSubChnlStatsEntry ::= SEQUENCE { viprSubChnlStatsInCellCountHiA Integer32, viprSubChnlStatsInCellCountLoA Integer32, viprSubChnlStatsOutCellCountHiA Integer32, viprSubChnlStatsOutCellCountLoA Integer32, viprSubChnlStatsInCellCountHiB Integer32, viprSubChnlStatsInCellCountLoB Integer32, viprSubChnlStatsOutCellCountHiB Integer32, viprSubChnlStatsOutCellCountLoB Integer32, viprSubChnlStatsTimer Integer32, viprSubChnlStatsInOdometerCellCountHiA Integer32, viprSubChnlStatsInOdometerCellCountLoA Integer32, viprSubChnlStatsOutOdometerCellCountHiA Integer32, viprSubChnlStatsOutOdometerCellCountLoA Integer32, viprSubChnlStatsInOdometerCellCountHiB Integer32, viprSubChnlStatsInOdometerCellCountLoB Integer32, viprSubChnlStatsOutOdometerCellCountHiB Integer32, viprSubChnlStatsOutOdometerCellCountLoB Integer32, viprSubChnlStatsOdometerTimer Integer32, viprSubChnlStatsOdometerReset INTEGER, viprSubChnlStatsCellsDroppedB Integer32, viprSubChnlStatsCellsTaggedB Integer32 } viprSubChnlStatsInCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells received on rt interface from another conn" ::= { viprSubChnlStatsEntry 1 } viprSubChnlStatsInCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells received on rt interface from another conn" ::= { viprSubChnlStatsEntry 2 } viprSubChnlStatsOutCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells sent out of a rt interface to another dest" ::= { viprSubChnlStatsEntry 3 } viprSubChnlStatsOutCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells sent out of a rt interface to another dest" ::= { viprSubChnlStatsEntry 4 } viprSubChnlStatsInCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells received on atm/fr/bridge physical interface " ::= { viprSubChnlStatsEntry 5 } viprSubChnlStatsInCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cells received on atm/fr/bridge physical interface " ::= { viprSubChnlStatsEntry 6 } viprSubChnlStatsOutCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cell transmitted out of a physical atm/fr/bridge interface" ::= { viprSubChnlStatsEntry 7 } viprSubChnlStatsOutCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "cell transmitted out of a physical atm/fr/bridge interface" ::= { viprSubChnlStatsEntry 8 } viprSubChnlStatsTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds stats have been collecting" ::= { viprSubChnlStatsEntry 9 } viprSubChnlStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells received on rt interface from another conn" ::= { viprSubChnlStatsEntry 10 } viprSubChnlStatsInOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells received on rt interface from another conn" ::= { viprSubChnlStatsEntry 11 } viprSubChnlStatsOutOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells sent out of a rt interface to another dest" ::= { viprSubChnlStatsEntry 12 } viprSubChnlStatsOutOdometerCellCountLoA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells sent out of a rt interface to another dest" ::= { viprSubChnlStatsEntry 13 } viprSubChnlStatsInOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells received on atm/fr/bridge physical interface " ::= { viprSubChnlStatsEntry 14 } viprSubChnlStatsInOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells received on atm/fr/bridge physical interface " ::= { viprSubChnlStatsEntry 15 } viprSubChnlStatsOutOdometerCellCountHiB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells transmitted out of a physical atm/fr/bridge interface" ::= { viprSubChnlStatsEntry 16 } viprSubChnlStatsOutOdometerCellCountLoB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "odometer cells transmitted out of a physical atm/fr/bridge interface" ::= { viprSubChnlStatsEntry 17 } viprSubChnlStatsOdometerTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Odometer Number of seconds stats have been collecting" ::= { viprSubChnlStatsEntry 18 } viprSubChnlStatsOdometerReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "to reset the subchannel statistics" ::= { viprSubChnlStatsEntry 19 } viprSubChnlStatsCellsDroppedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Dropped on the Incoming side of B" ::= { viprSubChnlStatsEntry 20 } viprSubChnlStatsCellsTaggedB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cells Tagged on the Incoming side of B" ::= { viprSubChnlStatsEntry 21 } virtualIntfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualIntfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Virtual Interfaces Configurations" ::= { intfStatistics 11 } virtualIntfStatsEntry OBJECT-TYPE SYNTAX VirtualIntfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index is the Interface and the Virutal Interface" INDEX { virtualIntfStatsIf, virtualIntfStatsVi } ::= { virtualIntfStatsTable 1 } VirtualIntfStatsEntry ::= SEQUENCE { virtualIntfStatsIf IntfIndex, virtualIntfStatsVi INTEGER, virtualIntfStatsEgrCellCount Integer32, virtualIntfStatsTimer Integer32, virtualIntfStatsReset INTEGER } virtualIntfStatsIf OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index for side A of an ATM-to-ATM PVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { virtualIntfStatsEntry 1 } virtualIntfStatsVi OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VI value. Def Val is 1 because 0 cannot be configured" ::= { virtualIntfStatsEntry 2 } virtualIntfStatsEgrCellCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Egress Cell Count on VI " ::= { virtualIntfStatsEntry 3 } virtualIntfStatsTimer OBJECT-TYPE SYNTAX Integer32 (1..899) MAX-ACCESS read-only STATUS current DESCRIPTION "Time, in seconds, since last reset." ::= { virtualIntfStatsEntry 4 } virtualIntfStatsReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "stats reset field." ::= { virtualIntfStatsEntry 5 } -- FW download group, two tables cardFwVerTable OBJECT-TYPE SYNTAX SEQUENCE OF CardFwVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of card firware version status" ::= { fwDriverSup 1 } cardFwVerEntry OBJECT-TYPE SYNTAX CardFwVerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for card firmware version status" INDEX { cardFwVerSlot } ::= { cardFwVerTable 1 } CardFwVerEntry ::= SEQUENCE { cardFwVerSlot INTEGER, cardFwVerType Integer32, cardFwVerCurrent OCTET STRING, cardFwVerCurrentIsDefault Integer32, cardFwVerNext OCTET STRING, cardFwVerNextIsDefault INTEGER, cardFwDnldStatus INTEGER, cardFwRetries Integer32 } cardFwVerSlot OBJECT-TYPE SYNTAX INTEGER (1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION "card slot number" ::= { cardFwVerEntry 1 } cardFwVerType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Card type" ::= { cardFwVerEntry 2 } cardFwVerCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-only STATUS current DESCRIPTION "Card firmware version currently loaded on firmware" ::= { cardFwVerEntry 3 } cardFwVerCurrentIsDefault OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "curent driver is default" ::= { cardFwVerEntry 4 } cardFwVerNext OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS read-write STATUS current DESCRIPTION "Card firmware version that user wants to upgrade to. The values are limited those supported by the release." ::= { cardFwVerEntry 5 } cardFwVerNextIsDefault OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "next driver is default" ::= { cardFwVerEntry 6 } cardFwDnldStatus OBJECT-TYPE SYNTAX INTEGER { failed(1), retry(2), progress(3), done(4), wrongCardType(5), wrongCardSType(6), drvUnavailable(7), drvInvHdrChksum(8), drvInvRecChksum(9), reqRepTimeout(10), cmplRepTimeout(11), mapCorrupted(12), mapUnavailable(13), mapInvChksum(14), mapNameImprop(15), cfgCorrupted(16), cfgUnavailable(17), cfgInvChksum(18), removeCardBeforeFinish(19), ioUnsupported(20) } MAX-ACCESS read-only STATUS current DESCRIPTION "firmware download procedure status" DEFVAL { done } ::= { cardFwVerEntry 7 } cardFwRetries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times firmware download procedure failed consequently." ::= { cardFwVerEntry 8 } fwDriverTable OBJECT-TYPE SYNTAX SEQUENCE OF FwDriverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of available firmware drivers" ::= { fwDriverSup 2 } fwDriverEntry OBJECT-TYPE SYNTAX FwDriverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for available firmware drivers" INDEX { fwSlotId, fwDriverType, fwIsDefault, fwDriverName } ::= { fwDriverTable 1 } FwDriverEntry ::= SEQUENCE { fwSlotId Integer32, fwDriverType Integer32, fwIsDefault Integer32, fwDriverName OCTET STRING, fwDriverFrn Integer32, fwDriverSize Integer32, fwDriverChecksum Integer32 } fwSlotId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "driver slot id" ::= { fwDriverEntry 1 } fwDriverType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "firmware driver type - definition consistent with cardType." ::= { fwDriverEntry 2 } fwIsDefault OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "firmware driver wether default or not" ::= { fwDriverEntry 3 } fwDriverName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(13)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "firmware driver file name" ::= { fwDriverEntry 4 } fwDriverFrn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware Release Number of firmware driver" ::= { fwDriverEntry 5 } fwDriverSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "file size of firmware driver" ::= { fwDriverEntry 6 } fwDriverChecksum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "checksum of firmware driver file" ::= { fwDriverEntry 7 } -- -- Tone Annce Control group -- -- Fields for initiating the compression action. tasCmprsAnnceId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Announcement ID for this announcement file to be compressed." ::= { toneAnnceControl 31 } tasCmprsAnnceReplaceId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Announcement ID of the announcement file to be replaced from the announcement table by this file." ::= { toneAnnceControl 32 } tasCmprsAnnceFilename OBJECT-TYPE SYNTAX DisplayString (SIZE(79)) MAX-ACCESS read-write STATUS current DESCRIPTION "File name for this announcement which is to be compressed." ::= { toneAnnceControl 33 } tasCmprsAnnceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description for this announcement which is to to be compressed." ::= { toneAnnceControl 34 } tasCmprsAnnceCmprsType OBJECT-TYPE SYNTAX INTEGER { uncompressed(1), compress8k(2), compress16k(3), compress32k(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of compression used for storing this announcement." ::= { toneAnnceControl 35 } tasCmprsAnnceType OBJECT-TYPE SYNTAX INTEGER { voice(1), toneVoice(2), userTones(3), music(4), musicVoice(5), toneMusic(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of this announcement." ::= { toneAnnceControl 36 } tasCmprsAnnceIntfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index in SSPPCCC format of TASM card on which this announcement is to be compressed." ::= { toneAnnceControl 37 } tasCmprsAction OBJECT-TYPE SYNTAX INTEGER { compress(1), delete(2), store(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action to be performed on this announcement." ::= { toneAnnceControl 38 } -- Fields for initiating the playing of the specified -- announcement on the specified interface. tasTstAnnceId OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Announcement ID to be played for testing." ::= { toneAnnceControl 39 } tasTstAnnceIntfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index in SSPPCCC format of CE card on which this announcement is to be played for testing." ::= { toneAnnceControl 40 } tasTstAnnceLawType OBJECT-TYPE SYNTAX INTEGER { a-Law(1), u-Law(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of CE card towards which this announcement is to be played. A-Law is for E1 and U-Law is for DS1" ::= { toneAnnceControl 41 } tasTstAnnceAction OBJECT-TYPE SYNTAX INTEGER { playStart(1), playStop(2), playAbort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action to be performed on this announcement for testing." ::= { toneAnnceControl 42 } -- Fields for initiating the specified line tests on the specified interface. -- tasTstLineId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Test ID to be started for line testing." ::= { toneAnnceControl 43 } tasTstLineIntfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index in SSPPCCC format of CE card on which this test is to be initiated." ::= { toneAnnceControl 44 } tasTstLineAction OBJECT-TYPE SYNTAX INTEGER { tstStart(1), tstStop(2), tstAbort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test action to be performed." ::= { toneAnnceControl 45 } tasMemIntfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index in SSPPCCC format of TASM card on which the memory is to be initialised." ::= { toneAnnceControl 46 } tasMemAction OBJECT-TYPE SYNTAX INTEGER { re-initialize(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test action to be performed." ::= { toneAnnceControl 47 } -- OAM segment flows toneAnnceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address for announcement ftp server." ::= { toneAnnceControl 48 } toneAnnceAccountName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account name for access to announcement ftp server." ::= { toneAnnceControl 49 } toneAnnceAccountPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "ftp account password for access to announcement ftp server." ::= { toneAnnceControl 50 } toneAnnceSourceFile OBJECT-TYPE SYNTAX DisplayString (SIZE(79)) MAX-ACCESS read-write STATUS current DESCRIPTION "announcement file with complete path on the ftp server " ::= { toneAnnceControl 51 } toneAnnceDestinationFile OBJECT-TYPE SYNTAX DisplayString (SIZE(12)) MAX-ACCESS read-write STATUS current DESCRIPTION "The announcementSourceFile will be renamed with MS DOS file format and placed in the /scsi/announce directory on the disk." ::= { toneAnnceControl 52 } toneAnnceFtpStatus OBJECT-TYPE SYNTAX INTEGER { noActivity(1), working(2), doneSuccessfully(3), doneWithError(4), aborted(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the ftp announcement download. Status of the software announcement. noActivity is the initial start state from boot-up. working is set while ftp'ing the announcement. The final state is one of doneSuccessfully, doneWithError, or aborted, all self-explanatory. It will stay in this state until re-boot or starting an announcement. If the state is doneWithError then announcementSwErrorStatus will be set to reflect the type of error." ::= { toneAnnceControl 53 } toneAnnceFtpErrorStatus OBJECT-TYPE SYNTAX INTEGER { none(1), userAbort(2), invalidIpAddress(3), invalidAccountName(4), invalidAccountPassword(5), invalidSourceFile(6), invalidDstFileNameFormat(7), dstFileNameAlreadyExist(8), tooManyAnnouncementNow(9), diskSpaceUsageExceed(10), unableToOpenFile(11), unableToMakeFtpConnection(12), unableToWriteFile(13), unableToCompleteFtp(14), unableToSpawnTask(15), unableToOpenScsiAnncDir(16), statFails(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the finish of the ftp software announcement download. Set to a value 3-21 if announcementSwCopyStatus is doneWithError. Set to none if announcementFtpCopyStatus is doneSuccessfully. Set to userAbort if announcementSwCopyStatus is aborted." DEFVAL { none } ::= { toneAnnceControl 54 } toneAnnceFtpAction OBJECT-TYPE SYNTAX INTEGER { start(1), abort(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "start ftp announcement files. When announcementFtpCopyStatus is working, the start request will be ignored. Abort will have effect only when announcementFtpCopystatus is working." ::= { toneAnnceControl 55 } -- ATM Trunking IWF Group atmTrunkingIWFBaseGroup OBJECT IDENTIFIER ::= { atmTrunkingMIBObjects 1 } atmTrunkingIWFIdentifier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "IWF ID for the local endpoint" DEFVAL { 0 } ::= { atmTrunkingIWFBaseGroup 1 } atmTrunkingIWFLocalAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "IWF ATM address for the local endpoint" ::= { atmTrunkingIWFBaseGroup 2 } atmTrunkingIWFMaxRemoteIWF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum remote IWF that can connect to this endpoint" DEFVAL { 100 } ::= { atmTrunkingIWFBaseGroup 3 } atmTrunkingIWFAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Local IWF is active or not" ::= { atmTrunkingIWFBaseGroup 4 } atmTrunkingRemoteIWFTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrunkingRemoteIWFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote IWF table" ::= { atmTrunkingMIBObjects 2 } atmTrunkingRemoteIWFEntry OBJECT-TYPE SYNTAX AtmTrunkingRemoteIWFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in atmTrunkingRemoteIWFTable" INDEX { atmTrunkingRemoteIWFIdentifier } ::= { atmTrunkingRemoteIWFTable 1 } AtmTrunkingRemoteIWFEntry ::= SEQUENCE { atmTrunkingRemoteIWFIdentifier Integer32, atmTrunkingRemoteIWFAddress OCTET STRING, atmTrunkingRemoteIWFTrnkMode INTEGER, atmTrunkingRemoteIWFAdminStatus INTEGER, atmTrunkingRemoteIWFRowStatus RowStatus } atmTrunkingRemoteIWFIdentifier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IWF ID for the remote IWF" ::= { atmTrunkingRemoteIWFEntry 1 } atmTrunkingRemoteIWFAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-create STATUS current DESCRIPTION "IWF ATM address for the remote IWF" ::= { atmTrunkingRemoteIWFEntry 2 } atmTrunkingRemoteIWFTrnkMode OBJECT-TYPE SYNTAX INTEGER { switched(1), non-switched(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum remote IWF that can connect to this endpoint" DEFVAL { switched } ::= { atmTrunkingRemoteIWFEntry 3 } atmTrunkingRemoteIWFAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the Local IWF is active or not" ::= { atmTrunkingRemoteIWFEntry 4 } atmTrunkingRemoteIWFRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum remote IWF that can connect to this endpoint" ::= { atmTrunkingRemoteIWFEntry 5 } atmTrunkingSigVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrunkingSigVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of iwf signaling vcc configuration entities" ::= { atmTrunkingMIBObjects 3 } atmTrunkingSigVccEntry OBJECT-TYPE SYNTAX AtmTrunkingSigVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in atmTrunkingSigVccTable" INDEX { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier } ::= { atmTrunkingSigVccTable 1 } AtmTrunkingSigVccEntry ::= SEQUENCE { atmTrunkingSigVccRmtIWFIdentifier Integer32, atmTrunkingSigVccIdentifier INTEGER, atmTrunkingSigVccOutgoingIfIndex IntfIndex, atmTrunkingSigVccOutgoingVpi INTEGER, atmTrunkingSigVccOutgoingVci INTEGER, atmTrunkingSigVccOwner INTEGER, atmTrunkingSigVccInactiveTimer Integer32, atmTrunkingSigVccType INTEGER, atmTrunkingSigVccSignaling INTEGER, atmTrunkingSigVccFwPcr01 Integer32, atmTrunkingSigVccBwPcr01 Integer32, atmTrunkingSigVccFwScr01 Integer32, atmTrunkingSigVccBwScr01 Integer32, atmTrunkingSigVccFwMbs01 Integer32, atmTrunkingSigVccBwMbs01 Integer32, atmTrunkingSigVccMaxAal2Vcc Integer32, atmTrunkingSigVccActiveAal2Vcc Integer32, atmTrunkingSigVccOperStatus Integer32, atmTrunkingSigVccRowStatus RowStatus, atmTrunkingSigVccViB INTEGER, atmTrunkingSigVccVUNIB INTEGER, atmTrunkingSigVccRetryTimer Integer32, atmTrunkingSigVccRetryLimit Integer32, atmTrunkingSigVccRestart INTEGER, atmTrunkingSigVccPriority INTEGER, atmTrunkingSigVccRetryCounter Integer32 } atmTrunkingSigVccRmtIWFIdentifier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IWF ID for the remote IWF" ::= { atmTrunkingSigVccEntry 1 } atmTrunkingSigVccIdentifier OBJECT-TYPE SYNTAX INTEGER (0..16383) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vcc ID assigned by the owner of this signaling Vcc" ::= { atmTrunkingSigVccEntry 2 } atmTrunkingSigVccOutgoingIfIndex OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Intf index of the outgoing interface,readonly for SVC/SPVC" ::= { atmTrunkingSigVccEntry 3 } atmTrunkingSigVccOutgoingVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VPI used at the outgoing interface, readonly for SVC/SPVC" ::= { atmTrunkingSigVccEntry 4 } atmTrunkingSigVccOutgoingVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "VCI used at the outgoing interface, readonly for SVC/SPVC" ::= { atmTrunkingSigVccEntry 5 } atmTrunkingSigVccOwner OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates who is the owner of the Sig VCC" ::= { atmTrunkingSigVccEntry 6 } atmTrunkingSigVccInactiveTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Inactive time period on which to clear the call" DEFVAL { 3600 } ::= { atmTrunkingSigVccEntry 7 } atmTrunkingSigVccType OBJECT-TYPE SYNTAX INTEGER { pvc(1), spvc(2), svc(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the SigVcc should be setup as PVC/SPVC/SVC" DEFVAL { svc } ::= { atmTrunkingSigVccEntry 8 } atmTrunkingSigVccSignaling OBJECT-TYPE SYNTAX INTEGER { pss1(1), dss1(2), dpnss(3), other(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the signalling protocol used between the IWFs" DEFVAL { other } ::= { atmTrunkingSigVccEntry 9 } atmTrunkingSigVccFwPcr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward PCR for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 10 } atmTrunkingSigVccBwPcr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward PCR for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 11 } atmTrunkingSigVccFwScr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward SCR for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 12 } atmTrunkingSigVccBwScr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward SCR for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 13 } atmTrunkingSigVccFwMbs01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward MBS for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 14 } atmTrunkingSigVccBwMbs01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward MBS for the call" DEFVAL { 1 } ::= { atmTrunkingSigVccEntry 15 } atmTrunkingSigVccMaxAal2Vcc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum number of bearer VCCs controlled by this SigVcc" DEFVAL { 255 } ::= { atmTrunkingSigVccEntry 16 } atmTrunkingSigVccActiveAal2Vcc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active bearer VCCs controlled by this SigVcc" ::= { atmTrunkingSigVccEntry 17 } atmTrunkingSigVccOperStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), outOfService(2), init(3), connecting(4), active(5), release(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Local IWF is active or not" ::= { atmTrunkingSigVccEntry 18 } atmTrunkingSigVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { atmTrunkingSigVccEntry 19 } atmTrunkingSigVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "VI to associate the Egress part of A2B connection" DEFVAL { 0 } ::= { atmTrunkingSigVccEntry 20 } atmTrunkingSigVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "VUNI associated the Egress part of A2B connection" DEFVAL { 0 } ::= { atmTrunkingSigVccEntry 21 } atmTrunkingSigVccRetryTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " the time(seconds) to wait before attempting to establish the ATM Trunking Signalling VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immedi ately" DEFVAL { 30 } ::= { atmTrunkingSigVccEntry 22} atmTrunkingSigVccRetryLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "ATM Trunking Signalling VCC SPVC Retry Limit. 0 indicates unlimited " DEFVAL { 0 } ::= { atmTrunkingSigVccEntry 23} atmTrunkingSigVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active ATM Trunking SPVC is released, if necessary, and a new setup procedure is begun if restart, otherwise, noop." ::= { atmTrunkingSigVccEntry 24 } atmTrunkingSigVccPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of TrunkingSigVcc - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { atmTrunkingSigVccEntry 25 } atmTrunkingSigVccRetryCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the SigVcc SPVC is restarted." ::= { atmTrunkingSigVccEntry 26 } atmTrunkingBrVccConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrunkingBrVccConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of iwf aal2 bearer vcci configuration entities" ::= { atmTrunkingMIBObjects 4 } atmTrunkingBrVccConfigEntry OBJECT-TYPE SYNTAX AtmTrunkingBrVccConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for iwf aal2 vcci configuration" INDEX { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId } ::= { atmTrunkingBrVccConfigTable 1 } AtmTrunkingBrVccConfigEntry ::= SEQUENCE { atmTrunkingBrVccRmtIWFId Integer32, atmTrunkingBrVccSigVccId INTEGER, atmTrunkingBrVccId INTEGER, atmTrunkingBrVccIf IntfIndex, atmTrunkingBrVccVpi INTEGER, atmTrunkingBrVccVci INTEGER, atmTrunkingBrVccViB INTEGER, atmTrunkingBrVccVUNIB INTEGER, atmTrunkingBrVccServiceType INTEGER, atmTrunkingBrVccSarType INTEGER, atmTrunkingBrVccOwner INTEGER, atmTrunkingBrVccOperStatus INTEGER, atmTrunkingBrVccFwAtmPcr01 Integer32, atmTrunkingBrVccBwAtmPcr01 Integer32, atmTrunkingBrVccFwAtmScr01 Integer32, atmTrunkingBrVccBwAtmScr01 Integer32, atmTrunkingBrVccFwAtmMbs01 Integer32, atmTrunkingBrVccBwAtmMbs01 Integer32, atmTrunkingBrVccConnType INTEGER, atmTrunkingBrVccActiveChanCnt Integer32, atmTrunkingBrVccMaxAal2ChanId Integer32, atmTrunkingBrVccCircuitModeDataSupp INTEGER, atmTrunkingBrVccFrameModeSupp INTEGER, atmTrunkingBrVccFaxModSupp INTEGER, atmTrunkingBrVccCASPktXportSupp INTEGER, atmTrunkingBrVccDTMFPktXportSupp INTEGER, atmTrunkingBrVccMFR1PktXportSupp INTEGER, atmTrunkingBrVccMFR2PktXportSupp INTEGER, atmTrunkingBrVccPCMEncoding INTEGER, atmTrunkingBrVccMaxFrameLength INTEGER, atmTrunkingBrVccIdleChannSuprSupp INTEGER, atmTrunkingBrVccSilenceDetSupp INTEGER, atmTrunkingBrVccCompressionSpec INTEGER, atmTrunkingBrVccAudioProfileSource INTEGER, atmTrunkingBrVccAudioProfileId INTEGER, atmTrunkingBrVccAvailBw INTEGER, atmTrunkingBrVccRowStatus RowStatus, atmTrunkingBrVccGr303Supp INTEGER, atmTrunkingBrVccOamStatus INTEGER, atmTrunkingBrVccInactiveTimer Integer32, atmTrunkingBrVccRetryTimer Integer32, atmTrunkingBrVccRetryLimit Integer32, atmTrunkingBrVccRestart INTEGER, atmTrunkingBrVccCuTimer INTEGER, atmTrunkingBrVccPriority INTEGER, atmTrunkingBrVccRetryCounter Integer32 } atmTrunkingBrVccRmtIWFId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IWF ID for the remote IWF" ::= { atmTrunkingBrVccConfigEntry 1 } atmTrunkingBrVccSigVccId OBJECT-TYPE SYNTAX INTEGER (0..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "Signalling Vcc associated with this Br Vcc" ::= { atmTrunkingBrVccConfigEntry 2 } atmTrunkingBrVccId OBJECT-TYPE SYNTAX INTEGER (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of the AAL2 Bear Vcc" ::= { atmTrunkingBrVccConfigEntry 3 } atmTrunkingBrVccIf OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Intf index of the outgoing interface, readonly for SVC/SPVC" ::= { atmTrunkingBrVccConfigEntry 4 } atmTrunkingBrVccVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VPI value of this VCC connection. Valid range is a number between 0 and 4095." ::= { atmTrunkingBrVccConfigEntry 5 } atmTrunkingBrVccVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "VCI value of this VCC connection. Valid range is a number between 0 and 65535." ::= { atmTrunkingBrVccConfigEntry 6 } atmTrunkingBrVccViB OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "VI to associate the Egress part of A2B connection" DEFVAL { 0 } ::= { atmTrunkingBrVccConfigEntry 7 } atmTrunkingBrVccVUNIB OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "VUNI associated the Egress part of A2B connection" DEFVAL { 0 } ::= { atmTrunkingBrVccConfigEntry 8 } atmTrunkingBrVccServiceType OBJECT-TYPE SYNTAX INTEGER { cbr-1(1), cbr-2(2), cbr-3(3), cbr-4(4), ubr(5), vbr-nrt2(6), vbr-nrt1(7), vbr-rt2(8), vbr-rt1(9), vbr-express(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "service type" DEFVAL { cbr-1 } ::= { atmTrunkingBrVccConfigEntry 9 } atmTrunkingBrVccSarType OBJECT-TYPE SYNTAX INTEGER { aal1(1), aal2(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "sar type" DEFVAL { aal2 } ::= { atmTrunkingBrVccConfigEntry 10 } atmTrunkingBrVccOwner OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The owner of this Vcc" ::= { atmTrunkingBrVccConfigEntry 11 } atmTrunkingBrVccOperStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), outOfService(2), init (3), active (4), release(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Operational Status of this Bearer Vcc" ::= { atmTrunkingBrVccConfigEntry 12 } atmTrunkingBrVccFwAtmPcr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward pcr (0+1)" DEFVAL { 172 } ::= { atmTrunkingBrVccConfigEntry 13 } atmTrunkingBrVccBwAtmPcr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward pcr (0+1)" DEFVAL { 172 } ::= { atmTrunkingBrVccConfigEntry 14 } atmTrunkingBrVccFwAtmScr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward scr (0+1)" DEFVAL { 172 } ::= { atmTrunkingBrVccConfigEntry 15 } atmTrunkingBrVccBwAtmScr01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward scr (0+1)" DEFVAL { 172 } ::= { atmTrunkingBrVccConfigEntry 16 } atmTrunkingBrVccFwAtmMbs01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Forward Mbs (0+1)" DEFVAL { 1 } ::= { atmTrunkingBrVccConfigEntry 17 } atmTrunkingBrVccBwAtmMbs01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Backward Mbs (0+1)" DEFVAL { 1 } ::= { atmTrunkingBrVccConfigEntry 18 } atmTrunkingBrVccConnType OBJECT-TYPE SYNTAX INTEGER { svc (1), spvc (2), pvc (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "connection type" DEFVAL { svc } ::= { atmTrunkingBrVccConfigEntry 19 } atmTrunkingBrVccActiveChanCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently active channels in this Vcc" DEFVAL { 0 } ::= { atmTrunkingBrVccConfigEntry 20 } atmTrunkingBrVccMaxAal2ChanId OBJECT-TYPE SYNTAX INTEGER (9..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Max Id of channels supported within this br vcc" DEFVAL { 255 } ::= { atmTrunkingBrVccConfigEntry 21 } atmTrunkingBrVccCircuitModeDataSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Circuit mode data" DEFVAL { enable } ::= { atmTrunkingBrVccConfigEntry 22 } atmTrunkingBrVccFrameModeSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Frame mode data" DEFVAL { disable } ::= { atmTrunkingBrVccConfigEntry 23 } atmTrunkingBrVccFaxModSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "FAX Demodulation" DEFVAL { enable } ::= { atmTrunkingBrVccConfigEntry 24 } atmTrunkingBrVccCASPktXportSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Channel Associated Signaling" DEFVAL { disable } ::= { atmTrunkingBrVccConfigEntry 25 } atmTrunkingBrVccDTMFPktXportSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "DTMF Dialed Digits" DEFVAL { enable } ::= { atmTrunkingBrVccConfigEntry 26 } atmTrunkingBrVccMFR1PktXportSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "MF-R1 Dialed Digits" DEFVAL { disable } ::= { atmTrunkingBrVccConfigEntry 27 } atmTrunkingBrVccMFR2PktXportSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "MF-R2 Dialed Digits" DEFVAL { disable } ::= { atmTrunkingBrVccConfigEntry 28 } atmTrunkingBrVccPCMEncoding OBJECT-TYPE SYNTAX INTEGER { none (1), a-law (2), u-law (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "DTMF Dialed Digits" DEFVAL { a-law } ::= { atmTrunkingBrVccConfigEntry 29 } atmTrunkingBrVccMaxFrameLength OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum length of frame mode data" DEFVAL { 4095 } ::= { atmTrunkingBrVccConfigEntry 30 } atmTrunkingBrVccIdleChannSuprSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Idle Channel Supression" DEFVAL { enable } ::= { atmTrunkingBrVccConfigEntry 31 } atmTrunkingBrVccSilenceDetSupp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Silence Detection" DEFVAL { enable } ::= { atmTrunkingBrVccConfigEntry 32 } atmTrunkingBrVccCompressionSpec OBJECT-TYPE SYNTAX INTEGER { none (1), g726-16K (2), g726-24K (3), g726-32K (4), g726-40K (5), g729a-8K (6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Compression Type" DEFVAL { none } ::= { atmTrunkingBrVccConfigEntry 33 } atmTrunkingBrVccAudioProfileSource OBJECT-TYPE SYNTAX INTEGER { itu-t (1), other (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Profile Source" DEFVAL { itu-t } ::= { atmTrunkingBrVccConfigEntry 34 } atmTrunkingBrVccAudioProfileId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Profile ID" ::= { atmTrunkingBrVccConfigEntry 35 } atmTrunkingBrVccAvailBw OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available Bandwidth left in this Vcc" DEFVAL { 0 } ::= { atmTrunkingBrVccConfigEntry 36 } atmTrunkingBrVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { atmTrunkingBrVccConfigEntry 37 } atmTrunkingBrVccGr303Supp OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "GR303 Support" DEFVAL { disable } ::= { atmTrunkingBrVccConfigEntry 38 } atmTrunkingBrVccOamStatus OBJECT-TYPE SYNTAX INTEGER { unsupp(1), end-Pt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is only an end point, therefore it will respond to AIS/RDI." DEFVAL { unsupp } ::= { atmTrunkingBrVccConfigEntry 39 } atmTrunkingBrVccInactiveTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The time(in seconds) to wait before releasing the ATM Trunking Bearer VCC SVC after all narrow band calls are dropped" DEFVAL { 3600 } ::= { atmTrunkingBrVccConfigEntry 40 } atmTrunkingBrVccRetryTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " the time(seconds) to wait before attempting to establish the ATM Trunking Bearer VCC SPVC after previous failed call attempt. 0 indicates retries will be attempted immediately" DEFVAL { 30 } ::= { atmTrunkingBrVccConfigEntry 41 } atmTrunkingBrVccRetryLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "ATM Trunking Bearer VCC SPVC Retry Limit. 0 indicates unlimited " DEFVAL { 0 } ::= { atmTrunkingBrVccConfigEntry 42 } atmTrunkingBrVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active ATM Trunking BrVcc SPVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmTrunkingBrVccConfigEntry 43 } atmTrunkingBrVccCuTimer OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "CuTimer represents combined use timer, is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out. " DEFVAL { 4 } ::= { atmTrunkingBrVccConfigEntry 44 } atmTrunkingBrVccPriority OBJECT-TYPE SYNTAX INTEGER { priority-1(1), priority-2(2), priority-3(3), priority-4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of TrunkingBrVcc - priority-1 being highest priority ." DEFVAL { priority-1 } ::= { atmTrunkingBrVccConfigEntry 45 } atmTrunkingBrVccRetryCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully established or the BrVcc SPVC is restarted." ::= { atmTrunkingBrVccConfigEntry 46 } atmTrunkingDataChannelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmTrunkingDataChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of iwf aal2 data channel configuration entities" ::= { atmTrunkingMIBObjects 5 } atmTrunkingDataChannelConfigEntry OBJECT-TYPE SYNTAX AtmTrunkingDataChannelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for iwf aal2 data channel configuration" INDEX { atmTrunkingDataChannelRmtIWFId, atmTrunkingDataChannelBrVccId, atmTrunkingDataChannelId } ::= { atmTrunkingDataChannelConfigTable 1} AtmTrunkingDataChannelConfigEntry ::= SEQUENCE { atmTrunkingDataChannelRmtIWFId Integer32, atmTrunkingDataChannelSigVccId INTEGER, atmTrunkingDataChannelBrVccId INTEGER, atmTrunkingDataChannelId INTEGER, atmTrunkingDataChanOperStatus INTEGER, atmTrunkingDataChanOwner INTEGER, atmTrunkingDataChanNBIntf IntfIndex } atmTrunkingDataChannelRmtIWFId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IWF ID for the remote IWF" ::= { atmTrunkingDataChannelConfigEntry 1 } atmTrunkingDataChannelSigVccId OBJECT-TYPE SYNTAX INTEGER (0..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "Vcc ID assigned by the owner of this signaling Vcc" ::= { atmTrunkingDataChannelConfigEntry 2 } atmTrunkingDataChannelBrVccId OBJECT-TYPE SYNTAX INTEGER (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of the AAL2 Bear Vcc" ::= { atmTrunkingDataChannelConfigEntry 3 } atmTrunkingDataChannelId OBJECT-TYPE SYNTAX INTEGER (8..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AAL2 Channel Id of this channel" ::= { atmTrunkingDataChannelConfigEntry 4 } atmTrunkingDataChanOperStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational Status of this channel" ::= { atmTrunkingDataChannelConfigEntry 5 } atmTrunkingDataChanOwner OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The owner of this channel" ::= { atmTrunkingDataChannelConfigEntry 6 } atmTrunkingDataChanNBIntf OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of narrowband interface this channel is mapped to" ::= { atmTrunkingDataChannelConfigEntry 7 } -- End of ATM Trunking IWF Group -- -- Beginning of H.248 MIB -- -- H.248 Permanent Termination ID Table h248TermIdTable OBJECT-TYPE SYNTAX SEQUENCE OF H248TermIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of H.248 Terminations" ::= { h248Config 1 } h248TermIdEntry OBJECT-TYPE SYNTAX H248TermIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition for H.248 Termination ID table" INDEX { h248TermSlotId, h248TermPhyPortId, h248TermLogPortId, h248TermChanId , h248TermVpi, h248TermVci } ::= { h248TermIdTable 1 } H248TermIdEntry ::= SEQUENCE { h248TermSlotId INTEGER, h248TermPhyPortId INTEGER, h248TermLogPortId INTEGER, h248TermChanId INTEGER, h248TermVpi INTEGER, h248TermVci INTEGER, h248TermId OCTET STRING, h248TermAal2Cid INTEGER, h248TermActivation INTEGER, h248TermRowStatus RowStatus } h248TermSlotId OBJECT-TYPE SYNTAX INTEGER ( 1..99 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot # for termination" ::= { h248TermIdEntry 1 } h248TermPhyPortId OBJECT-TYPE SYNTAX INTEGER ( 0..999 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Physical Port # for termination" ::= { h248TermIdEntry 2 } h248TermLogPortId OBJECT-TYPE SYNTAX INTEGER ( 0..999 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logical Port # for termination" ::= { h248TermIdEntry 3 } h248TermChanId OBJECT-TYPE SYNTAX INTEGER ( 0..999 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Chan # for termination" ::= { h248TermIdEntry 4 } h248TermVpi OBJECT-TYPE SYNTAX INTEGER ( 0..4096 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VPI = h248TermVpi - 1, for h248TermVpi > 0." ::= { h248TermIdEntry 5 } h248TermVci OBJECT-TYPE SYNTAX INTEGER ( 0..65536 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI # for termination. Value 0 is reserved to indicate N/A, e.g., TDM termination. Thus, VCI = h248TermVci - 1, for h248TermVci > 0." ::= { h248TermIdEntry 6 } h248TermId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Termination ID is provisioned by user and used for identifying termination between MGC and MG" ::= { h248TermIdEntry 7 } h248TermAal2Cid OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "AAL2 CID" ::= { h248TermIdEntry 8 } h248TermActivation OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Activation for termination ID" ::= { h248TermIdEntry 9 } h248TermRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "h248TermIdEntry row status" ::= { h248TermIdEntry 10 } -- -- H.248 Root Package At h248SysControl Group -- h248MaxNumberOfContexts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the property gives the maximum number of contexts that can exist at anytime. The NULL context is not included in this number." DEFVAL { 1000 } ::= { h248SysControl 1 } h248MaxTerminationsPerContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The max number of terminations allowed in a context." DEFVAL { 2 } ::= { h248SysControl 2 } h248NormalMGExecutionTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Settable by the MGC to indicate the interval within which the MGC expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds." DEFVAL { 1000 } ::= { h248SysControl 3 } h248NormalMGCExecutionTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Settable by the MGC to indicate the interval within which the MG expects a response to any transaction from the MG (exclusive of the network delay). Value represents milliseconds." DEFVAL { 1000 } ::= { h248SysControl 4 } h248MGProvisionalResponseTimerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the time within which the MGC should expect a Pending Response from the MG if a Transaction can not be completed. Initially set to h248NormalMGExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds." DEFVAL { 1000 } ::= { h248SysControl 5 } h248MGCProvisionalResponseTimerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the time within which the MG should expect a Pending Response from the MGC if a Transaction can not be completed. Initially set to h248NormalMGCExecutionTime, plus network delay, but maybe lowered. Value represents milliseconds." DEFVAL { 1000 } ::= { h248SysControl 6 } h248MGCIpAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the 1st MGC." ::= { h248SysControl 7 } h248MGCIpAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the 2nd MGC." ::= { h248SysControl 8 } -- Protection Group protectionGroup protectionGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtectionGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of interface protection group attributes" ::= { protectionGroup 1 } protectionGroupEntry OBJECT-TYPE SYNTAX ProtectionGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines one interface protection group" INDEX { pgtGroupId } ::= { protectionGroupTable 1 } ProtectionGroupEntry ::= SEQUENCE { pgtGroupId Integer32, pgtSwitchoverMethod INTEGER, pgtSwitchbackMethod INTEGER, pgtStandbySelection INTEGER, pgtRowStatus RowStatus } pgtGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "a user selected logical number representing a protection group uniquely within a PSAX" ::= { protectionGroupEntry 1 } pgtSwitchoverMethod OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " switchover method to switch traffic from failed primary interface to available standby interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, a failed primary does not switch traffic and gives control to user to do so." DEFVAL { auto } ::= { protectionGroupEntry 2 } pgtSwitchbackMethod OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " switchback method to switch traffic from a standby to its corresponding recovered primary interface. In auto method, PSAX automatically switches the traffic without user intervention. In manual method, standby does not switch traffic and gives control to user to do so." DEFVAL { auto } ::= { protectionGroupEntry 3 } pgtStandbySelection OBJECT-TYPE SYNTAX INTEGER { sequential(1), latest-used(2), oldest-used(3), random(4), explicit(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Standby selection method determines the order of selection of standby when primary interface fails. The options are: sequential -- internally select next higher available standby to the last one, latest_used -- used last one freed, oldest_used -- used to longest idle one, random \255 randomly select one, explicit -- selected by user." DEFVAL { sequential } ::= { protectionGroupEntry 4 } pgtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { protectionGroupEntry 5 } interfaceProtectionTable OBJECT-TYPE SYNTAX SEQUENCE OF InterfaceProtectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of interface protection attributes" ::= { protectionGroup 2 } interfaceProtectionEntry OBJECT-TYPE SYNTAX InterfaceProtectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines attributes for interface protection" INDEX { iptGroupId ,iptLogicalIntfId } ::= { interfaceProtectionTable 1 } InterfaceProtectionEntry ::= SEQUENCE { iptGroupId Integer32, iptLogicalIntfId Integer32, iptPhysicalIntfId Integer32, iptOperState INTEGER, iptIntfType INTEGER, iptOperatingIntf Integer32, iptProtCommand INTEGER, iptSelectedStandby Integer32, iptRowStatus RowStatus } iptGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "a user selected logical number representing a protection group uniquely within a PSAX." ::= { interfaceProtectionEntry 1 } iptLogicalIntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Logical interface number assigned by user" ::= { interfaceProtectionEntry 2 } iptPhysicalIntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "physical interface in SSPPCCC format" DEFVAL { 0 } ::= { interfaceProtectionEntry 3 } iptIntfType OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "interface primary or secondary." DEFVAL { primary } ::= { interfaceProtectionEntry 4 } iptOperState OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "indicates operational state of the interface." DEFVAL { inactive } ::= { interfaceProtectionEntry 5 } iptOperatingIntf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface." ::= { interfaceProtectionEntry 6 } iptProtCommand OBJECT-TYPE SYNTAX INTEGER { none(1), switchover(2), switchback(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "protection operational state of the interface. Indicates which logical interface is carrying traffic originally configured for this interface." DEFVAL{ none } ::= { interfaceProtectionEntry 7 } iptSelectedStandby OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Standby interface logical number on which to switch traffic. Used only in case of manual switchover with explicit standby selection." DEFVAL { 0 } ::= { interfaceProtectionEntry 8 } iptRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status" ::= { interfaceProtectionEntry 9 } -- End of protection Group -- Traps Group sysTraps -- systemEvents systemColdStartNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : System has successfully completed initialization from a complete power down stage and is ready for operation." ::= { systemEvents 1 } systemWarmStartNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : System has successfully completed initialization from a user or other system level interrupt or restart and is ready for operation." ::= { systemEvents 2 } ecdBootFailureNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : System failed in the Boot (startup) procedures. Please call Support immediately to resolve the problem." ::= { systemEvents 3 } referenceClockFailNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : The reference clock used for the operation of the bus-based backplane has failed. Please call Support immediately to resolve the problem." ::= { systemEvents 4 } referenceClockClearedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : The error in the backplane reference clock has been corrected." ::= { systemEvents 5 } compositeClockFailNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : The composite clock has failed. Please call Support immediately to resolve the problem." ::= { systemEvents 6 } compositeClockClearedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : The error in the composite clock has been corrected." ::= { systemEvents 7 } stratumModeChangeNotify NOTIFICATION-TYPE OBJECTS { stratumMode } STATUS current DESCRIPTION "Info : The current operational status of the Stratum card has changed." ::= { systemEvents 8 } powerSupplyStatusNotify NOTIFICATION-TYPE OBJECTS { powerSupplyReasonCode } STATUS current DESCRIPTION "Minor : Indicates the status of the power supply." ::= { systemEvents 9 } softwareDownloadStatusNotify NOTIFICATION-TYPE OBJECTS { upgradeSwCopyStatus, upgradeSwErrorStatus } STATUS current DESCRIPTION "Info : Indicates the completion status of the ftp download of a software upgrade." ::= { systemEvents 10 } -- Notifications added for NEC muxReadyConfirmReceivedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : Indicates that the MUX (AC 120) has received a MUX_READY_CONF message in response to the MUX_READY_IND message when the AC 120 is configured as the TCP client for the AC 120 to Signalling Gateway connection." ::= { systemEvents 11 } muxReadyConfirmNotReceivedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Major : If AC 120 is configured as TCP client, this trap is sent if the MUX_READY_CONF message is not received after sending the MUX_READY_IND message three times. This indicates unexpected behavior on the AC 120 to Signalling Gateway link." ::= { systemEvents 12 } oneWayMessageWhileInTwoWayStateNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Major : This trap indicates that a one way message is received from the Signalling Gateway (SG) when the AC 120 is in the two way state of the keep-alive protocol on the TCP link between the AC 120 and the SG." ::= { systemEvents 13 } inactivityTimerExpiredNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Major : Sent by the AC 120 when the inactivity timer of the keep-alive protocoal expires, i.e. when the AC 120 does not see a message from the Signalling Gateway on the TCP link during the time period specified by the inactivity timer value setting." ::= { systemEvents 14 } keepAliveTimerExpiredInLlDownStateNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Major : Sent by the AC 120 when the keep-alive timer expires in the LLDOWN state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting." ::= { systemEvents 15 } keepAliveTimerExpiredInOneWayStateNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Major : Sent by the AC 120 when the keep-alive timer expires in the ONE-WAY state of the keep-alive protocol, i.e. when the AC 120 does not see a keep-alive message from the Signalling Gateway on the TCP link during the time period specified by the keep-alive timer setting." ::= { systemEvents 16 } completeClockFailedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : The stratum cards have either been removed or have failed leading to no clock being provided." ::= { systemEvents 17 } completeClockRecoveredNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : A stratum card is now available to provide a clock source." ::= { systemEvents 18 } backplaneCircuitryFailedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : There is no activity on the cell bus. Please call Support immediately to resolve the problem." ::= { systemEvents 19 } backplaneCircuitryRecoveredNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : The cpu card is able to detect activity on the cell bus." ::= { systemEvents 20 } remoteRebootNotify NOTIFICATION-TYPE OBJECTS { remoteRebootReasonCode } STATUS current DESCRIPTION "Info : Indicates the result of the requested reboot action." ::= { systemEvents 21 } saveConfigurationNotify NOTIFICATION-TYPE OBJECTS { saveConfigurationReasonCode } STATUS current DESCRIPTION "Info : Indicates the result of the requested save configuration." ::= { systemEvents 22 } versionConfigurationNotify NOTIFICATION-TYPE OBJECTS { versionConfigurationReasonCode } STATUS current DESCRIPTION "Info : Indicates the completion status of the upgrade or downgrade." ::= { systemEvents 23 } fileTransferStatusNotify NOTIFICATION-TYPE OBJECTS { percentComplete } STATUS current DESCRIPTION "Info : Indicates the percent complete of the current upgrade, downgrade, or ftp download in progress." ::= { systemEvents 24 } ipOrMaskInvalidNotify NOTIFICATION-TYPE OBJECTS { ipTypeReasonCode } STATUS current DESCRIPTION "Response : The indicated ip address is invalid." ::= { systemEvents 25 } alarmCardInputChangeNotify NOTIFICATION-TYPE OBJECTS { alarmCardReasonCode, deviceId } STATUS current DESCRIPTION "Info : Indicates that the deviceId with alarmCardReasonCode has changed its status." ::= { systemEvents 26 } removeConfigFilesNotify NOTIFICATION-TYPE OBJECTS { removeConfigFiles } STATUS current DESCRIPTION "Info : Indicates the status of the removal of the configuration files." ::= { systemEvents 27 } alarmCardOutputChangeNotify NOTIFICATION-TYPE OBJECTS { alarmCardReasonCode, deviceId } STATUS current DESCRIPTION "Info : Indicates that the deviceId with alarmCardReasonCode has changed its status." ::= { systemEvents 28 } alarmCardAcoChangeNotify NOTIFICATION-TYPE OBJECTS { alarmCardReasonCode } STATUS current DESCRIPTION "Info : Indicates the action taken by the indicated type of the audible alarm." ::= { systemEvents 29 } snmpCommunityStringsChangedToPublicNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : An error has been detected in the agt.pty file and the community strings have been changed to be public." ::= { systemEvents 30 } pnniNodeCfgNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Node has been created." ::= { systemEvents 31 } pnniNodeCfgFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Node Creation has failed." ::= { systemEvents 32 } pnniNodeModFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Node Modification has failed." ::= { systemEvents 33 } pnniNodeDelFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Node Deletion has failed." ::= { systemEvents 34 } pnniNodeOOSFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that the action of taking a PNNI Node Out of Service has failed." ::= { systemEvents 35 } pnniNodeISFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, pnniCode } STATUS current DESCRIPTION "Info : Indicates that the action of bringing a PNNI Node into service has failed." ::= { systemEvents 36 } pnniRtAddrCfgNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a new PNNI Route Address has been Created." ::= { systemEvents 37 } pnniRtAddrCfgFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Route Address Configuration has failed." ::= { systemEvents 38 } pnniRtAddrModFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Route Address Modification has failed." ::= { systemEvents 39 } pnniRtAddrDelFailNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Route Address Deletion has failed." ::= { systemEvents 40 } pnniRtAddrAddByIlmiNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that an end system Address has been dynamically added to PNNI by ILMI." ::= { systemEvents 41 } pnniRtAddrDelByIlmiNotify NOTIFICATION-TYPE OBJECTS { swtchNodeIndx, interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that an end system Address has been dynamically deleted from PNNI by ILMI." ::= { systemEvents 42 } callContrlResAllocFailNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info: Indicates that the configuration of call control resource allocation fails." ::= { systemEvents 43 } differentSystemSoftwareNotify NOTIFICATION-TYPE OBJECTS { primarySoftwareVersion, backupSoftwareVersion } STATUS current DESCRIPTION "Critical: Indicates that the primary and backup cpu's are running different versions of software. This could cause system problems since the database files will not be transferred between cpu's so a change of cpu will result." ::= { systemEvents 44 } inputPortClockFailNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : The input port clock has failed. Please call Support immediately to resolve the problem." ::= { systemEvents 45 } inputPortClockClearedNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : The error in the input port clock has been corrected." ::= { systemEvents 46 } oldStratumCardNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : This trap indicates that the primary stratum card does not support this mode of operation being applied in the stratum configuration. Card must be upgraded. A default configuration is being applied to stratum " ::= { systemEvents 47 } stratumCardMismatchNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Critical : Indicates that the secondary stratum card does not support this mode of operation being applied to the primary stratum. Card must be upgraded." ::= { systemEvents 48 } tasCmprsAnnceNotify NOTIFICATION-TYPE OBJECTS { tasCmprsAnnceReasonCode , tasTrapAnnceId } STATUS current DESCRIPTION "Info : Indicates the result of the requested compress announcement operation." ::= { systemEvents 49 } tasTstLineNotify NOTIFICATION-TYPE OBJECTS { tasTstLineReasonCode , tasTrapTstId } STATUS current DESCRIPTION "Info : Indicates the result of the requested line test initiation operation." ::= { systemEvents 50 } tasMemNotify NOTIFICATION-TYPE OBJECTS { tasMemReasonCode } STATUS current DESCRIPTION "Info : Indicates the result of the requested TASM memory initiation operation." ::= { systemEvents 51 } ambientTemperatureChangeNotify NOTIFICATION-TYPE OBJECTS { ambientTemperature } STATUS current DESCRIPTION "Info : Indicates the ambient temperature has changed by 5 degrees centigrade since the last trap message." ::= { systemEvents 52 } systemInsuffMemNotify NOTIFICATION-TYPE STATUS current DESCRIPTION "Info : no enough memory for one or more features to be turned on." ::= { systemEvents 53 } toneAnnceFtpStatusNotify NOTIFICATION-TYPE OBJECTS { toneAnnceFtpStatus, toneAnnceFtpErrorStatus } STATUS current DESCRIPTION "Info : Indicates the completion status of the ftp download of a tone annoucement file." ::= { systemEvents 54 } tasmControlBlockResAllocFailNotify NOTIFICATION-TYPE OBJECTS { tasmControlBlockAllocFailReasonCode } STATUS current DESCRIPTION "Info: Indicates that the configuration of tasm control block resource allocation fails. Data send with the trap: tasmControlBlockAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-control-blocks-mem-unavail(2), res-alloc-Fail-digit-control-blocks-mem-unavail(3), res-alloc-Fail-line-test-control-blocks-mem-unavail(4)" ::= { systemEvents 55} tasmCacheMemAllocFailNotify NOTIFICATION-TYPE OBJECTS { tasmCacheMemAllocFailReasonCode } STATUS current DESCRIPTION "Info: Indicates that the configuration of tasm memory cache for announcement caching allocation fails. Data send with the trap:tasmCacheMemAllocFailReasonCode Possible values are: res-alloc-success(1), res-alloc-Fail-announce-cache-mem-unavail(2)" ::= { systemEvents 56} remoteDbOperationStatusNotify NOTIFICATION-TYPE OBJECTS { remoteDbOperationStatus, remoteDbOperationErrorStatus } STATUS current DESCRIPTION "Info : Indicates the completion status of remote database operation." ::= { systemEvents 57 } sapphireInterfaceAddressAssignFailNotify NOTIFICATION-TYPE OBJECTS { sapphireIntfAddressFailReasonCode } STATUS current DESCRIPTION "Info: Indicates that the assignment of the Sapphire interface address on which TCP connect requests are sent to SoftSwitch when PSAX is configured as Client has failed. Data send with the trap: sapphireIntfAddressFailReasonCode Possible values are: address-ok(1), Address assignment succeeded fail-Ilegal-IP-address(2), Illegal IP address assigned address not matching fail-not-match-InBandManagement-Switch-CPU-IP-Address(3) In-Band Management IP or Switch IP or CPU IP address fail-Switch-or-CPU-IP-Address-unconfigured(4) Switch IP or CPU IP address unconfigured fail-InBandManagement-IP-Address-unconfigured(5) InBandManagement IP address unconfigured. " ::= { systemEvents 58} switchAlarmStatusChangeNotify NOTIFICATION-TYPE OBJECTS { switchAlarmStatus } STATUS current DESCRIPTION "Critical : Trap to notify a change in the status of the alarm on the switch." ::= { systemEvents 59 } chassisOverTempAlarmNotify NOTIFICATION-TYPE OBJECTS { chassisOverTempAlarmReasonCode } STATUS current DESCRIPTION "Critical : Trap sent when the temperature of the chassis goes above or below a preset temperature threshold." ::= { systemEvents 60 } -- moduleEvents cardInsertionNotify NOTIFICATION-TYPE OBJECTS { cardSlot, cardType, cardProtectionStatus, cardOperStatus} STATUS current DESCRIPTION "Info : The indicated slot has had a card inserted into it." ::= { moduleEvents 1 } cardRemovedOrFailedNotify NOTIFICATION-TYPE OBJECTS { cardSlot } STATUS current DESCRIPTION "Major : The indicated slot has changed state." ::= { moduleEvents 2 } lineStatusChangedNotify NOTIFICATION-TYPE OBJECTS { portId, lineStatus } STATUS current DESCRIPTION "Major : The indicated port has had a change in the line status." ::= { moduleEvents 3 } firmwareDownloadSucceededNotify NOTIFICATION-TYPE OBJECTS { fwReleaseSlot } STATUS current DESCRIPTION "Info : The indicated slot has successfully completed a firmware download." ::= { moduleEvents 4 } firmwareDownloadFailedNotify NOTIFICATION-TYPE OBJECTS { fwReleaseSlot, firmwareDownloadReasonCode } STATUS current DESCRIPTION "Minor : The indicated slot had the indicated failure during a firmware download." ::= { moduleEvents 5 } moduleRebootNotify NOTIFICATION-TYPE OBJECTS { cardSlot, cardType } STATUS current DESCRIPTION "Major : This trap indicates that a cardType in cardSlot becomes busy and the CPU reboots it. This is different from when an I/O card is actually removed." ::= { moduleEvents 6 } oc3APSStateChangeNotify NOTIFICATION-TYPE OBJECTS { oc3APSPairPortIndex, oc3APSReasonCode, oc3APSK1K2Rx, oc3APSK1K2Tx,oc3APSSelectorState, oc3APSWorkingLineSignalStatus, oc3APSProtectionLineSignalStatus } STATUS current DESCRIPTION "Notification of a change in the APS state machine." ::= { moduleEvents 7 } oc3APSSwitchoverNotify NOTIFICATION-TYPE OBJECTS { oc3APSPairPortIndex, oc3APSReasonCode, oc3APSK1K2Rx, oc3APSK1K2Tx,oc3APSSelectorState, oc3APSWorkingLineSignalStatus, oc3APSProtectionLineSignalStatus } STATUS current DESCRIPTION "Notification of a switchover in an APS pair." ::= { moduleEvents 8 } portModifyFailNotify NOTIFICATION-TYPE OBJECTS {portId, portFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to modify an port parameters has failed." ::= { moduleEvents 9 } stratumActivitySwitchOverNotify NOTIFICATION-TYPE OBJECTS { activeStratum } STATUS current DESCRIPTION "Info : The secondary stratum card has become the primary primary card." ::= { moduleEvents 10 } imaGroupStatusChangeNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex,imaGrpChannelNeState, imaGrpChannelFeState, imaGrpChannelFailureStatus, imaGrpChannelSymmetry } STATUS current DESCRIPTION "The indicated SSPPCCC has a change in the states of the IMA Group Channel" ::= { moduleEvents 11 } -- interfaceEvents interfaceCreatedNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType} STATUS current DESCRIPTION "Info : Notification that an interface has been created." ::= { interfaceEvents 1} interfaceDeletedNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex} STATUS current DESCRIPTION "Info : Notification that an interface has been deleted." ::= { interfaceEvents 2 } interfaceModifiedNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType} STATUS current DESCRIPTION "Info : Notification that an interface has been modified." ::= { interfaceEvents 3 } interfaceModifyFailNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to modify an interface has failed." ::= { interfaceEvents 4 } interfaceOutOfServiceNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType} STATUS current DESCRIPTION "Major : Notification that an interface is now out of service." ::= { interfaceEvents 5 } interfaceInServiceNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType} STATUS current DESCRIPTION "Info : Notification that an interface is now in service." ::= { interfaceEvents 6 } bridgeDomainFullNotify NOTIFICATION-TYPE OBJECTS { bridgeDomainNumber } STATUS current DESCRIPTION "Info : The 15 ports available for the bridge domain are being used, leaving no space for an additional port." ::= { interfaceEvents 7 } bridgeDomainExceededForSlotNotify NOTIFICATION-TYPE OBJECTS { cardSlot } STATUS current DESCRIPTION "Info : The bridge domain number has been exceeded for the slot." ::= { interfaceEvents 8 } bridgeDomainNumberInUseNotify NOTIFICATION-TYPE OBJECTS { bridgeDomainNumber } STATUS current DESCRIPTION "Info : Notification that a bridge domain number is currently in use." ::= { interfaceEvents 9 } bridgeDomainInServiceNotify NOTIFICATION-TYPE OBJECTS { bridgeDomainNumber } STATUS current DESCRIPTION "Info : Notification that a bridge domain is now in service." ::= { interfaceEvents 10 } bridgeDomainNumberInvalidNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Indicates that this interface contains an invalid bridge domain number. In order to create a domain, associate a port with a domain, or bring an interface in service, a valid domain number must be provided." ::= { interfaceEvents 11 } signalingModifyFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, interfaceType, interfaceFailureReasonCode } STATUS current DESCRIPTION "Info : This trap indicates that signaling has already been configured for this port and to change, you must bring all interfaces out of service -- including the channel specified in interfaceIndex." ::= { interfaceEvents 12 } lmiIntfStatusNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, frLmiOperStatus } STATUS current DESCRIPTION "Info : This trap indicates the status of an interface from the LMI perspective." ::= { interfaceEvents 13 } isdnLapdDownNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, isdnIntfDChanId } STATUS current DESCRIPTION "Info : This trap indicates that LAPD on the ISDN interface has gone down." ::= { interfaceEvents 14 } isdnLapdUpNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, isdnIntfDChanId } STATUS current DESCRIPTION "Info : This trap indicates that LAPD is functional on the specified ISDN interface." ::= { interfaceEvents 15 } bridgeDomainTimingRelationshipNotify NOTIFICATION-TYPE OBJECTS { bridgeDomainNumber, timingReasonCode } STATUS current DESCRIPTION "Info : Trap sent when one of the following relationships is violated: (1) 2 * (BridgeForwardDelay - 1.0 sec) >= BridgeMaxAge (2) BridgeMaxAge >= 2 * (BridgeHelloTime + 1.0 sec)." ::= { interfaceEvents 16 } ts16UsageModifyFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, interfaceFailureReasonCode } STATUS current DESCRIPTION "Info : Indicates that either TS16 has been in use for data while trying to change e1 TS16 from CCS to CAS, or signaling is on for at least one of the channels while trying to change e1 TS16 from CAS to CCS." ::= { interfaceEvents 17 } ceServiceTypeModifyFailNotify NOTIFICATION-TYPE OBJECTS { portId, interfaceFailureReasonCode } STATUS current DESCRIPTION "Info : Indicates that configuring unstructured CE failed. Possible reasons are: (1) the port has been channelized; (2) the port has CAS turned on." ::= { interfaceEvents 18 } channelizationModifyFailNotify NOTIFICATION-TYPE OBJECTS { portId, interfaceFailureReasonCode } STATUS current DESCRIPTION "Info : Indicates that channelizing/unchannelizing failed. Possible reasons are: (1) the port has been configured for unstructured CE; (2) the port has CAS turned on." ::= { interfaceEvents 19 } cirEmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as CES SPVC endpoint. Return value - interfaceIndex" ::= { interfaceEvents 20 } cirEmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters." ::= { interfaceEvents 21 } cirEmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that CE SPVC configuration has been deleted. Return value - interfaceIndex" ::= { interfaceEvents 22} cirEmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 23 } cirEmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 24 } vbrSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return value - interfaceIndex" ::= { interfaceEvents 25} vbrSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters." ::= { interfaceEvents 26 } vbrSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that TE SPVC configuration has been deleted. Return value - interfaceIndex" ::= { interfaceEvents 27 } vbrSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 28 } vbrSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 29 } atmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return value - interfaceIndex - A-side vpi/vci value" ::= { interfaceEvents 30 } atmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return value - interfaceIndex - A-side vpi/vci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters." ::= { interfaceEvents 31 } atmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } STATUS current DESCRIPTION "Info : Notification that ATM SPVC configuration has been deleted. Return value - interfaceIndex - A-side vpi/vci value" ::= { interfaceEvents 32 } atmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 33 } atmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 34 } cRC4ModifyFailNotify NOTIFICATION-TYPE OBJECTS { portId, interfaceFailureReasonCode } STATUS current DESCRIPTION "Info: Notification that modification of the CRC4 field of an E1 port failed." ::= { interfaceEvents 35 } imaGrpChannelFailNotify NOTIFICATION-TYPE OBJECTS { imaGrpChannelId, imaGrpChannelStatus } STATUS current DESCRIPTION "Info : The imaGrpChannelFailNotify trap indicates a failure in the IMA group. The imaGrpChannelStatus field indicates the reason for the failure." ::= { interfaceEvents 36 } atmImaIntfFailNotify NOTIFICATION-TYPE OBJECTS { atmImaIntfIndex, atmImaIntfStatus } STATUS current DESCRIPTION "Info : The atmImaIntfFailNotify trap indicates a failure in the physical IMA interface. The atmImaIntfStatus field indicates the reason for the failure." ::= { interfaceEvents 37 } imaGrpChannelClearedNotify NOTIFICATION-TYPE OBJECTS { imaGrpChannelId, imaGrpChannelStatus } STATUS current DESCRIPTION "Info : The imaGrpChannelClearedNotify trap indicates a failure has been cleared in an IMA group. The imaGrpChannelStatus field indicates the failure that has been cleared." ::= { interfaceEvents 38 } atmImaIntfClearedNotify NOTIFICATION-TYPE OBJECTS { atmImaIntfIndex, atmImaIntfStatus } STATUS current DESCRIPTION "Info : The atmImaIntfClearedNotify trap indicates a failure has been cleared in an IMA interface. The atmImaIntfStatus field indicates the failure that has been cleared." ::= { interfaceEvents 39 } pnniProtLnkUpAndAdv NOTIFICATION-TYPE OBJECTS { interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that the Protocol Status of the PNNI Link is Up and Advertising." ::= { interfaceEvents 40 } pnniProtLinkUpAndNotAdv NOTIFICATION-TYPE OBJECTS { interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that the Protocol Status of the PNNI Link is Up but not Advertising." ::= { interfaceEvents 41 } pnniProtLnkStatDown NOTIFICATION-TYPE OBJECTS { interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that the Protocol Status of the PNNI Link is Down." ::= { interfaceEvents 42 } pnniIntfCfgFailNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, pnniCode } STATUS current DESCRIPTION "Info : Indicates that a PNNI Interface has failed to be Created." ::= { interfaceEvents 43 } -- VIPR Task Traps. -- Ray Change. viprPingTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, ipAddrNumber, pingStatusReasonCode } STATUS current DESCRIPTION "Info : The Vipr Task is notifying Network Management of the disposition of a previous Ping Request." ::= { interfaceEvents 44 } -- Ray Change. viprArpTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, arpStatus } STATUS current DESCRIPTION "Info : The Vipr Task is notifying Network Management of the disposition of a previous Arp Table Request." ::= { interfaceEvents 45 } -- Ray Change. viprRoutingTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, routingStatus } STATUS current DESCRIPTION "Info : The Vipr Task is notifying Network Management of the disposition of a previous Routing Table Request." ::= { interfaceEvents 46 } viprVpnTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, vpnTrapStatus } STATUS current DESCRIPTION "Info : Indicates success/fail of VPN level operations." ::= { interfaceEvents 47 } viprIpIntfTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, viprIntfId, ipIntfStatus } STATUS current DESCRIPTION "Info : Indicates success/fail of IP Network Interface level operations." ::= { interfaceEvents 48 } viprSubChanTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, viprIntfId, viprSubChnlId, subChanStatus } STATUS current DESCRIPTION "Info : Indicates success/fail of Sub Channel level operations." ::= { interfaceEvents 49 } viprRtSrvTrap NOTIFICATION-TYPE OBJECTS { cardSlot, routeSrvStatus } STATUS current DESCRIPTION "Info : Indicates success/fail of Vipr (Route Server) operations." ::= { interfaceEvents 50 } atmSvcIntfLayer2Up NOTIFICATION-TYPE OBJECTS { interfaceIndex, interfaceType } STATUS current DESCRIPTION "Info : Indicates that an ATM Svc Interface Assured Data Link is Up." ::= { interfaceEvents 51 } atmSvcIntfLayer2Down NOTIFICATION-TYPE OBJECTS { interfaceIndex, interfaceType } STATUS current DESCRIPTION "Info : Indicates that an ATM Svc Interface Assured Data Link is Down." ::= { interfaceEvents 52 } apsConfigurationModifyFailNotify NOTIFICATION-TYPE OBJECTS { oc3PortId, apsFailureReasonCode } STATUS current DESCRIPTION "Info: Notification that an attempt to modify an APS configuration has failed" ::={ interfaceEvents 53 } viprStatRtTrap NOTIFICATION-TYPE OBJECTS { viprSlot, viprRouterId, viprRouteId, statRtStatus } STATUS current DESCRIPTION "Info : Indicates success/fail of Static Route operations." ::= { interfaceEvents 54 } interfaceCreateFailNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceType, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details." ::= { interfaceEvents 55 } virtualIntfCreatedNotify NOTIFICATION-TYPE OBJECTS { virtualIntfConfigIf, virtualIntfConfigVi } STATUS current DESCRIPTION "Response to creation of VI" ::= { interfaceEvents 56 } virtualIntfModifiedNotify NOTIFICATION-TYPE OBJECTS { virtualIntfConfigIf, virtualIntfConfigVi } STATUS current DESCRIPTION "Response to modification of VI" ::= { interfaceEvents 57 } virtualIntfDeleteNotify NOTIFICATION-TYPE OBJECTS { virtualIntfConfigIf, virtualIntfConfigVi } STATUS current DESCRIPTION "Response to deletion of VI" ::= { interfaceEvents 58 } virtualIntfModifyFailNotify NOTIFICATION-TYPE OBJECTS { virtualIntfConfigIf, virtualIntfConfigVi, pvcFailureReasonCode} STATUS current DESCRIPTION "Response to Modify Fail of VI, Overload pvcFailureReasonCode" ::= { interfaceEvents 59 } frAtmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as FR SPVC endpoint. Return values - interfaceIndex - dlci value" ::= { interfaceEvents 60 } frAtmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as FR SPVC endpoint has failed. Return values - interfaceIndex - dlci value - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters." ::= { interfaceEvents 61 } frAtmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA } STATUS current DESCRIPTION "Info : Notification that FR SPVC configuration has been deleted. Return values - interfaceIndex - dlci value" ::= { interfaceEvents 62} frAtmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001. Return values - interfaceIndex - dlci value" ::= { interfaceEvents 63 } frAtmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a FR SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 64 } -- Changes for 1 integration - new trap declaration. -- Frame Relay Spvc's don't need the new change. atmAtmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address" ::= { interfaceEvents 65 } atmAtmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters" ::= { interfaceEvents 66 } atmAtmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA,atmAtmSpvcVccRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that ATM SPVC configuration has been deleted. Return values - interfaceIndex - A-side vpi/vci values - remote NSAP address" ::= { interfaceEvents 67 } atmAtmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 68 } atmAtmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 69 } cirAtmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr} STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as CE SPVC endpoint. Return values - interfaceIndex - remote NSAP address" ::= { interfaceEvents 70 } cirAtmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as CE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters" ::= { interfaceEvents 71 } cirAtmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr } STATUS current DESCRIPTION "Info : Notification that CE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address" ::= { interfaceEvents 72} cirAtmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 73 } cirAtmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA,cirAtmSpvcVccRemoteCePortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a CE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 74 } vbrAtmSpvcConfiguredNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr } STATUS current DESCRIPTION "Info : Notification that an endpoint has been configured as TE SPVC endpoint. Return values - interfaceIndex - remote NSAP address" ::= { interfaceEvents 75} vbrAtmSpvcConfigFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an endpoint as TE SPVC endpoint has failed. Return values - interfaceIndex - remote NSAP address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters" ::= { interfaceEvents 76 } vbrAtmSpvcDeletedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr } STATUS current DESCRIPTION "Info : Notification that TE SPVC configuration has been deleted. Return values - interfaceIndex - remote NSAP address" ::= { interfaceEvents 77 } vbrAtmSpvcModifiedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr } STATUS current DESCRIPTION "Info : Notification that a SPVC endpoint has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 78 } vbrAtmSpvcModifyFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a TE SPVC endpoint has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 79 } virtualUNIIntfCreatedNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId} STATUS current DESCRIPTION "Response to creation of Virtual UNI" ::= { interfaceEvents 80 } virtualUNIIntfCreateFailNotify NOTIFICATION-TYPE OBJECTS {virtualUNIIfIndex, virtualUNIVUNIId, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to create an interface has failed. interfaceFailureReasonCode gives details." ::= { interfaceEvents 81 } virtualUNIIntfModifiedNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId } STATUS current DESCRIPTION "Notification of a failure to modify a Virtual UNI interface." ::= { interfaceEvents 82 } virtualUNIIntfDeleteNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId } STATUS current DESCRIPTION "Response to deletion of Virtual UNI" ::= { interfaceEvents 83 } virtualUNIIntfModifyFailNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId, interfaceFailureReasonCode} STATUS current DESCRIPTION "Response to Modify Fail of Virtual UNI, Overload interfaceFailureReasonCode" ::= { interfaceEvents 84 } virtualUNIIntfOutOfServiceNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId } STATUS current DESCRIPTION "Notification of virtualUNI Out Of Service" ::= { interfaceEvents 85 } virtualUNIIntfInServiceNotify NOTIFICATION-TYPE OBJECTS { virtualUNIIfIndex, virtualUNIVUNIId } STATUS current DESCRIPTION "Notification of virtualUNI in Service" ::= { interfaceEvents 86 } gr303IgCreatedNotify NOTIFICATION-TYPE OBJECTS { gr303IgId } STATUS current DESCRIPTION "Response to creation of GR303IG" ::= { interfaceEvents 87 } gr303IgCreateFailNotify NOTIFICATION-TYPE OBJECTS {gr303IgId, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to create a gr303 interface group has failed. interfaceFailureReasonCode gives details." ::= { interfaceEvents 88 } gr303IgModifiedNotify NOTIFICATION-TYPE OBJECTS { gr303IgId } STATUS current DESCRIPTION "Response to modification of GR303IG" ::= { interfaceEvents 89 } gr303IgDeleteNotify NOTIFICATION-TYPE OBJECTS { gr303IgId } STATUS current DESCRIPTION "Response to deletion of GR303IG" ::= { interfaceEvents 90 } gr303IgModifyFailNotify NOTIFICATION-TYPE OBJECTS { gr303IgId, interfaceFailureReasonCode} STATUS current DESCRIPTION "Response to Modify Fail of GR303IG, Overload interfaceFailureReasonCode" ::= { interfaceEvents 91 } gr303IgOutOfServiceNotify NOTIFICATION-TYPE OBJECTS { gr303IgId } STATUS current DESCRIPTION "Notification of GR303IG Out Of Service" ::= { interfaceEvents 92 } gr303IgInServiceNotify NOTIFICATION-TYPE OBJECTS { gr303IgId } STATUS current DESCRIPTION "Notification of GR303IG in Service" ::= { interfaceEvents 93 } gr303IgIntfAddedNotify NOTIFICATION-TYPE OBJECTS { gr303IntfIgId, gr303IgIntfId} STATUS current DESCRIPTION "Response to addition of DS1 interface into GR303IG" ::= { interfaceEvents 94 } gr303IgIntfAddFailNotify NOTIFICATION-TYPE OBJECTS {gr303IntfIgId, gr303IgIntfId, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that an attempt to add an interface has failed. interfaceFailureReasonCode gives details." ::= { interfaceEvents 95 } gr303IgIntfDeleteNotify NOTIFICATION-TYPE OBJECTS { gr303IntfIgId, gr303IgIntfId } STATUS current DESCRIPTION "Response to deletion of DS1 interface from GR303IG" ::= { interfaceEvents 96 } gr303TMCChanDownNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, gr303TMCChannelId } STATUS current DESCRIPTION "Info : This trap indicates that TMC (LAPD) on the GR303 interface has gone down." ::= { interfaceEvents 97 } gr303EOCChanDownNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, gr303EOCChannelId } STATUS current DESCRIPTION "Info : This trap indicates that EOC (LAPD) on the GR303 interface has gone down." ::= { interfaceEvents 98 } gr303TMCChanUpNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, gr303TMCChannelId } STATUS current DESCRIPTION "Info : This trap indicates that TMC(LAPD) is functional on the specified GR303 interface." ::= { interfaceEvents 99 } gr303EOCChanUpNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, gr303EOCChannelId } STATUS current DESCRIPTION "Info : This trap indicates that EOC(LAPD) is functional on the specified GR303 interface." ::= { interfaceEvents 100 } gr303PPSStateChangeNotify NOTIFICATION-TYPE OBJECTS { gr303IgId, gr303PPSReasonCode, gr303PPSSource, gr303IgPrimaryTMCStatus, gr303IgPrimaryEOCStatus, gr303IgBackupTMCStatus, gr303IgBackupEOCStatus } STATUS current DESCRIPTION "This indicates a change in the states of primary and secondary TMC/EOC (lapd)" ::= { interfaceEvents 101 } gr303PPSSwitchoverNotify NOTIFICATION-TYPE OBJECTS { gr303IgId, gr303PPSReasonCode, gr303PPSSource, gr303IgPrimaryTMCStatus, gr303IgPrimaryEOCStatus, gr303IgBackupTMCStatus, gr303IgBackupEOCStatus } STATUS current DESCRIPTION "This notification is the result of PPS switching command which will indicate the reason code, initiator and states" ::= { interfaceEvents 102 } gr303PPSCommandFailNotify NOTIFICATION-TYPE OBJECTS { gr303IgId, gr303PPSReasonCode, gr303PPSSource, gr303IgPrimaryTMCStatus, gr303IgPrimaryEOCStatus, gr303IgBackupTMCStatus, gr303IgBackupEOCStatus } STATUS current DESCRIPTION "This is the notification of failure of PPS switching command" ::= { interfaceEvents 103 } interfaceBandwidthChangeNotify NOTIFICATION-TYPE OBJECTS {interfaceIndex, interfaceFailureReasonCode} STATUS current DESCRIPTION "Info : Notification that a interface has undergone reduction in bandwidth. Critical depending on Failure Reason Code." ::= { interfaceEvents 104 } -- -- Notiification of SPVP actions -- atmAtmSpvpConfiguredNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA,atmAtmSpvcVpcRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that an ATM SPVP has been configured at the ATM SPVC endpoint. Return values - interfaceIndex - A-side vpi value - remote NSAP Address" ::= { interfaceEvents 105 } atmAtmSpvpConfigFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA,atmAtmSpvcVpcRemoteAtmPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to configure an ATM SPVP at the ATM SPVC endpoint has failed. Return values - interfaceIndex - A-side vpi value - remote NSAP Address - spvcConfigFailureCode: An identified reason for failure while configuring/modifying SPVC parameters." ::= { interfaceEvents 106 } atmAtmSpvpDeletedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA, atmAtmSpvcVpcRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that an ATM SPVP configuration has been deleted. Return values - interfaceIndex - A-side vpi value - remote NSAP Address" ::= { interfaceEvents 107 } atmAtmSpvpModifiedNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA,atmAtmSpvcVpcRemoteAtmPortAddr } STATUS current DESCRIPTION "Info : Notification that an ATM SPVP configuration has been modified - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 108 } atmAtmSpvpModifyFailNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA,atmAtmSpvcVpcRemoteAtmPortAddr, spvcConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an attempt to modify a ATM SPVP configuration has failed - this trap has been obsoleted 07/01/2001." ::= { interfaceEvents 109 } atmTrunkingLocalIWFConfiguredNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier } STATUS current DESCRIPTION "Info: Local IWF Configured return value: atmTrunkingIWFIdentifier" ::= { interfaceEvents 110 } atmTrunkingLocalIWFConfigFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info: Local IWF Configured return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode" ::= { interfaceEvents 111 } atmTrunkingLocalIWFModifiedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier } STATUS current DESCRIPTION "Info: configuration of Local IWF modified return value: atmTrunkingIWFIdentifier" ::= { interfaceEvents 112 } atmTrunkingLocalIWFModifyFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info: Modification of Local IWF has failed return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode" ::= { interfaceEvents 113 } atmTrunkingLocalIWFDeletedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier } STATUS current DESCRIPTION "Info: configuration of Local IWF deleted return value: atmTrunkingIWFIdentifier" ::= { interfaceEvents 114 } atmTrunkingLocalIWFDeleteFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingIWFIdentifier, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info: configuration of Local IWF can not be deleted return value: atmTrunkingIWFIdentifier atmTrunkingConfigFailureCode" ::= { interfaceEvents 115 } atmTrunkingRemoteIWFConfiguredNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingRemoteIWFIdentifier } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier" ::= { interfaceEvents 116 } atmTrunkingRemoteIWFConfigFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingRemoteIWFIdentifier, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Remote IWF configuration has failed with return value : - atmTrunkingRmtIWFIdentifier - atmTrunkingConfigFailureCode " ::= { interfaceEvents 117 } atmTrunkingRemoteIWFDeletedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingRemoteIWFIdentifier } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Remote IWF has been deleted with return values - atmTrunkingRmtIWFIdentifier" ::= { interfaceEvents 118 } atmTrunkingRemoteIWFModifiedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingRemoteIWFIdentifier } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Remote IWF has been modified with return values - atmTrunkingRmtIWFIdentifier" ::= { interfaceEvents 119 } atmTrunkingRemoteIWFModifyFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingRemoteIWFIdentifier,atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Remote IWF has been configured with return values - atmTrunkingRmtIWFIdentifier" ::= { interfaceEvents 120 } atmTrunkingSigVccConfiguredNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Signalling VCC has been configured between Local IWF and with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier " ::= { interfaceEvents 121 } atmTrunkingSigVccConfigFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Signalling VCC configuration has failed with return value: - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier - atmTrunkingConfigFailureCode " ::= { interfaceEvents 122 } atmTrunkingSigVccDeletedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Signalling VCC has been deleted with return values - atmTrunkingSigVccRmtIWFIdentifier - atmTrunkingSigVccIdentifier " ::= { interfaceEvents 123 } atmTrunkingBrVccConfiguredNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Bearer VCC has been configured between Local IWF and with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier " ::= { interfaceEvents 124 } atmTrunkingBrVccConfigFailNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId, atmTrunkingConfigFailureCode } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Bearer VCC configuration has failed with return value: - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier - atmTrunkingConfigFailureCode " ::= { interfaceEvents 125 } atmTrunkingBrVccDeletedNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId } STATUS current DESCRIPTION "Info : Notification that an ATM TRUNKING Bearer VCC has been deleted with return values - atmTrunkingBrVccRmtIWFIdentifier - atmTrunkingBrVccIdentifier " ::= { interfaceEvents 126 } -- connectionEvents -- Request Fail Notify atmPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB, pvcFailureReasonCode} STATUS current DESCRIPTION "Response : The PVC VCC connection request between two atm interfaces failed." ::= { connectionEvents 1 } atmPvcVpcReqFailNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB, pvcFailureReasonCode} STATUS current DESCRIPTION "Response : The PVC VPC connection request between two atm interfaces failed." ::= { connectionEvents 2 } ipAtmAppPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC connection request between in-band management and an atm interface has failed." ::= { connectionEvents 3 } cirEmAtmPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC connection request between a circuit emulation interface and an atm interface has failed." ::= { connectionEvents 4 } vbrAtmPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC connection request between a variable-bit rate interface and an atm interface has failed." ::= { connectionEvents 5 } frAtmPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC connection request between a frame-relay interface and an atm interface has failed." ::= {connectionEvents 6 } frFrPvcReqFailNotify NOTIFICATION-TYPE OBJECTS { frFrPvcIfA, frFrPvcDlciA, frFrPvcIfB, frFrPvcDlciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC connection request between two frame-relay interfaces has failed." ::= { connectionEvents 7 } cirEmCirEmPvcReqFailNotify NOTIFICATION-TYPE OBJECTS { cirEmCirEmPvcIfA, cirEmCirEmPvcIfB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC connection request between two circuit emulation interfaces has failed." ::= { connectionEvents 8 } vbrVbrPvcReqFailNotify NOTIFICATION-TYPE OBJECTS { vbrVbrPvcIfA, vbrVbrPvcIfB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC connection request between two variable-bit rate interfaces has failed." ::= { connectionEvents 9 } -- Setup Notify atmPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between two atm interfaces has been created." ::= { connectionEvents 10 } atmPvcVpcSetupNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } STATUS current DESCRIPTION "Response : The PVC VPC connection between two atm interfaces has been created." ::= { connectionEvents 11 } ipAtmAppPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between in-band management and an atm interface has been created." ::= { connectionEvents 12 } cirEmAtmPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a circuit emulation interface and an atm interface has been created." ::= { connectionEvents 13 } vbrAtmPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been created." ::= { connectionEvents 14 } frAtmPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a frame-relay interface and an atm interface has been created." ::= { connectionEvents 15 } frFrPvcSetupNotify NOTIFICATION-TYPE OBJECTS { frFrPvcIfA, frFrPvcDlciA, frFrPvcIfB, frFrPvcDlciB } STATUS current DESCRIPTION "Response : The PVC connection between two frame-relay interfaces has been created." ::= { connectionEvents 16 } cirEmCirEmPvcSetupNotify NOTIFICATION-TYPE OBJECTS { cirEmCirEmPvcIfA, cirEmCirEmPvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two circuit-emulation interfaces has been created." ::= { connectionEvents 17 } vbrVbrPvcSetupNotify NOTIFICATION-TYPE OBJECTS { vbrVbrPvcIfA, vbrVbrPvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two variable-bit rate interfaces has been created." ::= { connectionEvents 18 } -- Tear Down Notify atmPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between two atm interfaces has been deleted." ::= { connectionEvents 19 } atmPvcVpcTearDownNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } STATUS current DESCRIPTION "Response : The PVC VPC connection between two atm interfaces has been deleted." ::= { connectionEvents 20 } ipAtmAppPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between in-band management and an atm interface has been deleted." ::= { connectionEvents 21 } cirEmAtmPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a circuit-emulation interface and an atm interface has been deleted." ::= { connectionEvents 22 } vbrAtmPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a variable-bit rate interface and an atm interface has been deleted." ::= { connectionEvents 23 } frAtmPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a frame-relay interface and an atm interface has been deleted." ::= { connectionEvents 24 } frFrPvcTearDownNotify NOTIFICATION-TYPE OBJECTS { frFrPvcIfA, frFrPvcDlciA, frFrPvcIfB, frFrPvcDlciB } STATUS current DESCRIPTION "Response : The PVC connection between two frame-relay interfaces has been deleted." ::= { connectionEvents 25 } cirEmCirEmPvcTearDownNotify NOTIFICATION-TYPE OBJECTS { cirEmCirEmPvcIfA, cirEmCirEmPvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two circuit-emulation interfaces has been deleted." ::= { connectionEvents 26 } vbrVbrPvcTearDownNotify NOTIFICATION-TYPE OBJECTS { vbrVbrPvcIfA, vbrVbrPvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two variable-bit rate interfaces has been deleted." ::= { connectionEvents 27 } bridgeBridgePvcReqFailNotify NOTIFICATION-TYPE OBJECTS { bridgeBridgePvcIfA, bridgeBridgePvcIfB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC connection request between two bridge interfaces has failed." ::= { connectionEvents 28 } bridgeBridgePvcSetupNotify NOTIFICATION-TYPE OBJECTS { bridgeBridgePvcIfA, bridgeBridgePvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two bridge interfaces has been created." ::= { connectionEvents 29 } bridgeBridgePvcTearDownNotify NOTIFICATION-TYPE OBJECTS { bridgeBridgePvcIfA, bridgeBridgePvcIfB } STATUS current DESCRIPTION "Response : The PVC connection between two bridge interfaces has been deleted." ::= { connectionEvents 30 } bridgeAtmPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC connection request between a bridge interface and an atm interface has failed." ::= { connectionEvents 31 } bridgeAtmPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a bridge interface and an atm interface has been created." ::= { connectionEvents 32 } bridgeAtmPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The PVC VCC connection between a bridge interface and an atm interface has been deleted." ::= { connectionEvents 33 } cellTestReqFailNotify NOTIFICATION-TYPE OBJECTS { cellTestIfB, cellTestVpiB, cellTestVcidB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC connection request has failed." ::= { connectionEvents 34 } lmiDlciStatusNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, dlciNumber, lmiDlciOperStatus } STATUS current DESCRIPTION "Response : Indicates the end-to-end status of the PVC of which this DLCI is a segment of." ::= { connectionEvents 35 } cirEmAtmBkPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between a circuit emulation interface and an atm interface has failed." ::= { connectionEvents 36 } cirEmAtmBkPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a circuit emulation interface and an atm interface has been created." ::= { connectionEvents 37 } cirEmAtmBkPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmPvcVccIfA, cirEmAtmPvcVccIfB, cirEmAtmPvcVccVpiB, cirEmAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a circuit-emulation interface and an atm interface has been deleted." ::= { connectionEvents 38} vbrAtmBkPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between a variable-bit rate interface and an atm interface has failed." ::= { connectionEvents 39 } vbrAtmBkPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been created." ::= { connectionEvents 40 } vbrAtmBkPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { vbrAtmPvcVccIfA, vbrAtmPvcVccIfB, vbrAtmPvcVccVpiB, vbrAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a variable-bit rate interface and an atm interface has been deleted." ::= { connectionEvents 41 } atmBkPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between an atm interface and an atm interface has failed." ::= { connectionEvents 42 } atmBkPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been created." ::= { connectionEvents 43 } atmBkPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { atmPvcVccIfA, atmPvcVccVpiA, atmPvcVccVciA, atmPvcVccIfB, atmPvcVccVpiB, atmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between an atm interface and an atm interface has been deleted." ::= { connectionEvents 44 } frAtmBkPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between a frame relay interface and an atm interface has failed." ::= { connectionEvents 45 } frAtmBkPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been created." ::= { connectionEvents 46 } frAtmBkPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { frAtmPvcVccIfA, frAtmPvcVccDlciA, frAtmPvcVccIfB, frAtmPvcVccVpiB, frAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a frame relay interface and an atm interface has been deleted." ::= { connectionEvents 47 } atmBkPvcVpcReqFailNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VPC backup connection request between an atm interface and an atm interface has failed." ::= { connectionEvents 48 } atmBkPvcVpcSetupNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } STATUS current DESCRIPTION "Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been created." ::= { connectionEvents 49 } atmBkPvcVpcTearDownNotify NOTIFICATION-TYPE OBJECTS { atmPvcVpcIfA, atmPvcVpcVpiA, atmPvcVpcIfB, atmPvcVpcVpiB } STATUS current DESCRIPTION "Response : The DHPVC VPC backup connection between an atm interface and an atm interface has been deleted." ::= { connectionEvents 50 } bridgeAtmBkPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between a bridge interface and an atm interface has failed." ::= { connectionEvents 51 } bridgeAtmBkPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been created." ::= { connectionEvents 52 } bridgeAtmBkPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { bridgeAtmPvcVccIfA, bridgeAtmPvcVccIfB, bridgeAtmPvcVccVpiB, bridgeAtmPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between a bridge interface and an atm interface has been deleted." ::= { connectionEvents 53 } ipAtmBkAppPvcVccReqFailNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection request between an in-band management interface and an atm interface has failed." ::= { connectionEvents 54 } ipAtmBkAppPvcVccSetupNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been created." ::= { connectionEvents 55 } ipAtmBkAppPvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { ipAtmAppPvcVccDestAddrA, ipAtmAppPvcVccSubnetMaskA, ipAtmAppPvcVccIfB, ipAtmAppPvcVccVpiB, ipAtmAppPvcVccVciB } STATUS current DESCRIPTION "Response : The DHPVC VCC backup connection between an in-band management interface and an atm interface has been deleted." ::= { connectionEvents 56 } cirEmAtmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmSpvcVccIfA, cirEmAtmSpvcVccIfB, cirEmAtmSpvcVccVpiB, cirEmAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 57 } vbrAtmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { vbrAtmSpvcVccIfA, vbrAtmSpvcVccIfB, vbrAtmSpvcVccVpiB, vbrAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 58 } atmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA, atmSpvcVccIfB, atmSpvcVccVpiB, atmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 59 } cirEmAtmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { cirEmAtmSpvcVccIfA, cirEmAtmSpvcVccIfB, cirEmAtmSpvcVccVpiB, cirEmAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 60 } vbrAtmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { vbrAtmSpvcVccIfA, vbrAtmSpvcVccIfB, vbrAtmSpvcVccVpiB, vbrAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 61 } atmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { atmSpvcVccIfA, atmSpvcVccVpiA, atmSpvcVccVciA, atmSpvcVccIfB, atmSpvcVccVpiB, atmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 62 } oamTestReqFailNotify NOTIFICATION-TYPE OBJECTS { oamTestIfB, oamTestVpiB, oamTestVciB, oamTestFailureReasonCode } STATUS current DESCRIPTION "Response : OAM loopback test request has failed." ::= { connectionEvents 63 } oamActDeactResultNotify NOTIFICATION-TYPE OBJECTS { oamActDeactIfB, oamActDeactVpiB, oamActDeactVciB, oamActDeactResultCode } STATUS current DESCRIPTION "Response : the final status of oam Activation-Deactivation request." ::= { connectionEvents 64 } frAtmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA, frAtmSpvcVccIfB, frAtmSpvcVccVpiB, frAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between FR and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 65 } frAtmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, frAtmSpvcVccDlciA, frAtmSpvcVccIfB, frAtmSpvcVccVpiB, frAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between FR and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side dlci B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 66 } -- Changes for 1 integration - new trap declaration. -- Frame Relay Spvc's don't need the new change. atmAtmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA,atmAtmSpvcVccRemoteAtmPortAddr, atmAtmSpvcVccIfB, atmAtmSpvcVccVpiB, atmAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between ATM and ATM endpoints has been made successfully. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 67 } atmAtmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA, atmAtmSpvcVccVciA, atmAtmSpvcVccRemoteAtmPortAddr, atmAtmSpvcVccIfB, atmAtmSpvcVccVpiB, atmAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between ATM and ATM endpoints has been deleted. Return values - A-side interfaceIndex A-side vpi/vci Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 68 } cirAtmSpvcVccSetUpNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr, cirAtmSpvcVccIfB, cirAtmSpvcVccVpiB, cirAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between CE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 69 } cirAtmSpvcVccTearDownNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, cirAtmSpvcVccRemoteCePortAddr, cirAtmSpvcVccIfB, cirAtmSpvcVccVpiB, cirAtmSpvcVccVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between CE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 70 } vbrAtmSpvcSetUpNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr, vbrAtmSpvcIfB, vbrAtmSpvcVpiB, vbrAtmSpvcVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between TE and ATM endpoints has been made successfully. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 71 } vbrAtmSpvcTearDownNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, vbrAtmSpvcRemoteVbrPortAddr, vbrAtmSpvcIfB, vbrAtmSpvcVpiB, vbrAtmSpvcVciB } STATUS current DESCRIPTION "Response : Notification that a SPVC connection between TE and ATM endpoints has been deleted. Return values - A-side interfaceIndex Remote NSAP address B-side interfaceIndex B-side vpi/vci" ::= { connectionEvents 72 } aal2TrunkConfigSetupNotify NOTIFICATION-TYPE OBJECTS { aal2TrunkConfigIf, aal2TrunkConfigVpi, aal2TrunkConfigVci } STATUS current DESCRIPTION "Response : The PVC VCC connection for aal2 trunk" ::= { connectionEvents 73 } aal2TrunkConfigTearDownNotify NOTIFICATION-TYPE OBJECTS { aal2TrunkConfigIf, aal2TrunkConfigVpi, aal2TrunkConfigVci } STATUS current DESCRIPTION "Response : The PVC VCC AAL2 Trunk has been deleted" ::= { connectionEvents 74 } aal2TrunkConfigReqFailNotify NOTIFICATION-TYPE OBJECTS { aal2TrunkConfigIf, aal2TrunkConfigVpi, aal2TrunkConfigVci, pvcFailureReasonCode } STATUS current DESCRIPTION "Response : The PVC VCC aal2 trunk could not be setup" ::= { connectionEvents 75 } gr303Aal2PvcConfigReqFailNotify NOTIFICATION-TYPE OBJECTS { gr303Aal2PvcVccGr303IgId, gr303Aal2PvcVccGr303CallRef, gr303Aal2PvcVccIfB, gr303Aal2PvcVccVpiB, gr303Aal2PvcVccVciB, gr303Aal2PvcVccAal2Cid } STATUS current DESCRIPTION "Response : The GR303 PVC VCC on aal2 trunk could not be setup" ::= { connectionEvents 76 } gr303Aal2PvcSetUpNotify NOTIFICATION-TYPE OBJECTS { gr303Aal2PvcVccGr303IgId, gr303Aal2PvcVccGr303CallRef, gr303Aal2PvcVccIfB, gr303Aal2PvcVccVpiB, gr303Aal2PvcVccVciB, gr303Aal2PvcVccAal2Cid } STATUS current DESCRIPTION "Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been made successfully." ::= { connectionEvents 77 } gr303Aal2PvcTearDownNotify NOTIFICATION-TYPE OBJECTS { gr303Aal2PvcVccGr303IgId, gr303Aal2PvcVccGr303CallRef, gr303Aal2PvcVccIfB, gr303Aal2PvcVccVpiB, gr303Aal2PvcVccVciB, gr303Aal2PvcVccAal2Cid } STATUS current DESCRIPTION "Response : Notification that a monitor connection between Gr303 call ref and ATM AAL2 CID has been deleted" ::= { connectionEvents 78 } dhpvcChangeNotify NOTIFICATION-TYPE OBJECTS { interfaceIndex, atmVpi, atmVci, pvcFailureReasonCode } STATUS current DESCRIPTION "This will indicate the changes in a dual home pvc. This will have 2 indications. One is when there is a switchover which indicate the last state and the new one (eg Prim To Bkup) Secondly there will also be an indication when there is a state change which will indicate the new state only (eg Primary is Active and in No Fail Condition and Backup is Passive and in Fail Condition). In case of state change the traffic path is not changed but it indicates the state of the passive path. " ::= { connectionEvents 79 } -- -- Notification of SPVP connections -- atmAtmSpvcVpcSetUpNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVpcVpiA,atmAtmSpvcVpcRemoteAtmPortAddr, atmAtmSpvcVpcIfB, atmAtmSpvcVccVpiB} STATUS current DESCRIPTION "Response : Notification that a SPVP connection between ATM and ATM endpoints has been made successfully." ::= { connectionEvents 80} atmAtmSpvcVpcTearDownNotify NOTIFICATION-TYPE OBJECTS { spvcAddrIfA, atmAtmSpvcVccVpiA,atmAtmSpvcVpcRemoteAtmPortAddr, atmAtmSpvcVpcIfB, atmAtmSpvcVpcVpiB} STATUS current DESCRIPTION "Response : Notification that a SPVP connection between ATM and ATM endpoints has been deleted." ::= { connectionEvents 81 } iptResultNotify NOTIFICATION-TYPE OBJECTS { iptGroupId, iptLogicalIntfId, iptResultCode } STATUS current DESCRIPTION "Response : the final status of interface protection request." ::= { connectionEvents 82} pgtResultNotify NOTIFICATION-TYPE OBJECTS { pgtGroupId, pgtResultCode } STATUS current DESCRIPTION "Response : the final status of interface protection group request." ::= { connectionEvents 83} atmTrunkingSigVccSetUpNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier } STATUS current DESCRIPTION "Response : Notification that a ATM Trunking Signalling VCC has been setup successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier" ::= { connectionEvents 84 } atmTrunkingSigVccTearDownNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingSigVccRmtIWFIdentifier, atmTrunkingSigVccIdentifier } STATUS current DESCRIPTION "Response : Notification that a ATM Trunking Signalling VCC has been torn down successfully. Return values - atmTrunkingSigVccRmtIWFIdentifier atmTrunkingSigVccIdentifier" ::= { connectionEvents 85 } atmTrunkingBrVccSetUpNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId } STATUS current DESCRIPTION "Response : Notification that a ATM Trunking Bearer VCC has been setup successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier" ::= { connectionEvents 86 } atmTrunkingBrVccTearDownNotify NOTIFICATION-TYPE OBJECTS { atmTrunkingBrVccRmtIWFId, atmTrunkingBrVccId } STATUS current DESCRIPTION "Response : Notification that a ATM Trunking Bearer VCC has been torn down successfully. Return values - atmTrunkingBrVccRmtIWFIdentifier atmTrunkingBrVccIdentifier" ::= { connectionEvents 87 } END