-- Quantum Bridge ATM Management Information Base -- Version 1.0.0 -- October 15, 2000 -- -- Quantum Bridge Corporation -- One High Street -- North Andover, MA 01845 -- (978) 688-9100 -- ---------------------------------------------------------------------------------------- -- -- 07/10/2001 - dqin added qbAtmDefaultPCBE -- 07/09/2001 - bfardy modify last changes to adhere to standard MIB -- 06/17/2001 - bfardy added support for hierarchical pnni design (anni) -- -- 05/24/2001 - bfardy added in-band mgmt table, deprecated some duplicate -- objects in vcl table. -- -- 03/28/2001 - mvaysman added qbAtmInterfaceStatTable. -- Added -- qbAtmVplF4F5TxStatus,qbAtmVplF4F5TxLastChange, -- qbAtmVplF4F5RxStatus, -- qbAtmVplF4F5RxLastChange to -- qbAtmVplTable and qbAtmVclTable -- -- 03/01/2001 - bfardy created qbAtmPnniNbrPeerTable, based on (the very large) -- atm forum pnni 0055 table. -- 01/02/2001 - mvaysman changed default in qbAtmPnniIfTable -- -- 12/13/2000 - mvaysman corrected comments -- -- 12/07/200 - mvaysman added qbAtmPnniRouteAddrProto object -- -- 08/10/200 - mvaysman added qbAtmInterfaceConfTable and qbAtmTrafficDescrParamDefault -- -- 07/06/2000 - mvaysman Original version -- ---------------------------------------------------------------------------------------- -- QB-ATM-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-IDENTITY, MODULE-IDENTITY, OBJECT-TYPE, Counter32, IpAddress, Integer32 FROM SNMPv2-SMI atmTrafficDescrParamEntry, atmVcCrossConnectEntry, atmVpCrossConnectEntry, atmInterfaceConfEntry, atmVclEntry, atmVplEntry FROM ATM-MIB AtmAddr, AtmConnKind, AtmConnCastType, AtmServiceCategory, AtmTrafficDescrParamIndex, AtmVpIdentifier, AtmVcIdentifier, AtmVorXAdminStatus, AtmVorXLastChange, AtmVorXOperStatus, atmNoClpNoScr FROM ATM-TC-MIB TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero, ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TimeStamp FROM QBSYS-SYSTEM-MIB qbMibs FROM QUANTUMBRIDGE-REG QbEnableStatus,QbPvcConnKind FROM QB-DWS-MIB ; qbAtmMIB MODULE-IDENTITY LAST-UPDATED "0101022155Z" -- January 2, 2001 ORGANIZATION "Quantum Bridge Inc." CONTACT-INFO "mvaysman@quantumbridge.com" DESCRIPTION "This module defines additional objects for management of ATM links in Quantum Bridge devices, above and beyond what is defined in the standard ATM mib, and proposed drafts." ::= { qbMibs 7 } -- Top-level organization of the MIB qbAtmObjects OBJECT IDENTIFIER ::= { qbAtmMIB 1 } qbAtmConformance OBJECT IDENTIFIER ::= { qbAtmMIB 2 } qbAtmBaseGroup OBJECT IDENTIFIER ::= { qbAtmMIB 3 } -- a truth value Boolean ::= INTEGER { true(1), false(2) } QbAtmPnniWeight ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ATM administrative weight of the ATM interface used by the PNNI Routing Control" SYNTAX INTEGER (100..1000000) QbAtmPnniNodeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Global PNNI Node Id used in the QB PNNI system." SYNTAX OCTET STRING (SIZE (22)) QbAtmSigSpec ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ATM interface signalling spec." SYNTAX INTEGER { other(1), uni30(2), uni31(3), uni40(4), pnni(5), iisp30(6), iisp31(7), aini(8) } QbAtmPnniHelloState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of an instance of the PNNI Hello State machine." REFERENCE "ATM Forum PNNI 1.0 Section 5.6.2.1.2" SYNTAX INTEGER { notApplicable(1), down(2), attempt(3), oneWayInside(4), twoWayInside(5), oneWayOutside(6), twoWayOutside(7), commonOutside(8) } QbAtmPnniAtmAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ATM address used by the network entity. The address types are: no address (0 octets), and NSAP (20 octets)." REFERENCE "ATM Forum PNNI 1.0 Section 5.2" SYNTAX OCTET STRING (SIZE(0|20)) QbAtmPnniNodeIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An index that identifies a logical PNNI entity within the managed system. The distinguished value zero indicates the null instance or no instance in the qbAtmPnniNodeCfgParentNodeIndex. In all other cases, the distinguished value zero indicates a logical entity within the switching system that manages routes only over non-PNNI interfaces. By default, only the node identified by node index one is created, and all PNNI interfaces are associated with that node." SYNTAX Integer32 (0..65535) QbAtmPnniPeerGroupId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A PNNI peer group ID." REFERENCE "ATM Forum PNNI 1.0 Section 5.3.2" SYNTAX OCTET STRING (SIZE(14)) QbF4F5LoopbackStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "in-progress(1) or success(2) or timeout(3)." SYNTAX INTEGER { in-progress(1), success(2), timeout(3) } QbF4F5Status ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Definition of F4/F5 OperStatus" SYNTAX BITS { cc-seg(0), cc-ete(1), rdi-seg(2), rdi-ete(3), ais-seg(4), ais-ete(5), good(6), unavailable(7) } -- ************************************************************** -- General QB ATM System wide group -- ************************************************************** qbAtmF4F5LLID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object stores Loopback Location ID (LLID)." ::= { qbAtmBaseGroup 1 } qbAtmDefaultPCBE OBJECT-TYPE SYNTAX INTEGER (10..70) MAX-ACCESS read-write STATUS current DESCRIPTION "This object stores the default atm cell tax to be used by the system." ::= { qbAtmBaseGroup 2 } -- ************************************************************** -- Extensions to the ATM Interface Configuration Parameters Group -- ************************************************************** qbAtmInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmInterfaceConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge ATM Interface Configuration Table contains extensions to the ATM Interface Configuration Table, one entry per ATM interface." ::= { qbAtmObjects 1 } qbAtmInterfaceConfEntry OBJECT-TYPE SYNTAX QbAtmInterfaceConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Quantum ATM Interface Configuration Table. Every ATM interface contains a corresponding entry in the table." AUGMENTS { atmInterfaceConfEntry } ::= { qbAtmInterfaceConfTable 1 } QbAtmInterfaceConfEntry ::= SEQUENCE { qbAtmInterfaceConfPolicingStatus INTEGER, qbAtmInterfaceConfMaxPvcVci INTEGER, qbAtmInterfaceConfMinPvcVci INTEGER, qbAtmInterfaceConfMaxPvcVpi INTEGER, qbAtmInterfaceConfMinPvcVpi INTEGER, qbAtmInterfaceConfMaxPvpVpi INTEGER, qbAtmInterfaceConfMinPvpVpi INTEGER } qbAtmInterfaceConfPolicingStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is set to 'enable' the policing is enabled on this interface. If the object set to 'disable,' the policing is disabled. Note: policing can be set on the S622 and 155 cards only." DEFVAL { disable } ::= { qbAtmInterfaceConfEntry 1 } qbAtmInterfaceConfMaxPvcVpi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum value of VPI that can be used to create a VC on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 2 } qbAtmInterfaceConfMinPvcVpi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the minimum value of VPI that can be used to create a VC on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 3 } qbAtmInterfaceConfMaxPvcVci OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum value of VCI that can be used to create a VC on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 4 } qbAtmInterfaceConfMinPvcVci OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the minimum value of VCI that can be used to create a VC on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 5 } qbAtmInterfaceConfMaxPvpVpi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum value of VPI that can be used to create a VP on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 6 } qbAtmInterfaceConfMinPvpVpi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the minimum value of VPI that can be used to create a VP on a given ATM native interface." ::= { qbAtmInterfaceConfEntry 7 } -- ************************************************************** -- Extensions to the ATM Traffic Descriptor Parameter Table -- ************************************************************** qbAtmTrafficDescrParamTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmTrafficDescrParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge ATM Traffic Descriptor Table contains extensions to the ATM Traffic Descriptor Table." ::= { qbAtmObjects 2 } qbAtmTrafficDescrParamEntry OBJECT-TYPE SYNTAX QbAtmTrafficDescrParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Quantum Bridge ATM Traffic Descriptor Table." AUGMENTS { atmTrafficDescrParamEntry } ::= { qbAtmTrafficDescrParamTable 1 } QbAtmTrafficDescrParamEntry ::= SEQUENCE { qbAtmTrafficDescrParamName DisplayString, qbAtmTrafficDescrParamDefault Boolean } qbAtmTrafficDescrParamName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description of the traffic descriptor." DEFVAL { "" } ::= { qbAtmTrafficDescrParamEntry 1 } qbAtmTrafficDescrParamDefault OBJECT-TYPE SYNTAX Boolean MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether or not this is a default traffic descriptor. Traffic descriptor with indexes from 1 to 20 are default traffic descriptors and cannot be deleted." DEFVAL { false } ::= { qbAtmTrafficDescrParamEntry 2 } -- **************************************************************** -- Extension to the ATM VCL Table -- **************************************************************** qbAtmVclTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge Table contains an extension to the atmVclConnectTable, An entry in this table models VCLs." ::= { qbAtmObjects 3 } qbAtmVclEntry OBJECT-TYPE SYNTAX QbAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the QB ATM atmVclConnectTable." AUGMENTS { atmVclEntry } ::= { qbAtmVclTable 1 } QbAtmVclEntry ::= SEQUENCE { qbAtmVclLoopback QbEnableStatus, qbAtmVclF4F5LoopbackInsert OCTET STRING, qbAtmVclF4F5LoopbackStatus QbF4F5LoopbackStatus, qbAtmVclF4F5LoopbackTimestamp TimeStamp, qbAtmVclMgmtIpAddr IpAddress, qbAtmVclMgmtIpMask IpAddress, qbAtmVclMgmtNeighborIP IpAddress, qbAtmVclConnKind QbPvcConnKind, qbAtmVclF4F5TxStatus QbF4F5Status, qbAtmVclF4F5TxLastChange TimeStamp, qbAtmVclF4F5RxStatus QbF4F5Status, qbAtmVclF4F5RxLastChange TimeStamp } qbAtmVclLoopback OBJECT-TYPE SYNTAX QbEnableStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable loopback on this ATM VCL" DEFVAL { disable } ::= { qbAtmVclEntry 1 } qbAtmVclF4F5LoopbackInsert OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a loopback Insert object for LLID. Start loopback Insert by setting this to an LLID value." ::= { qbAtmVclEntry 2 } qbAtmVclF4F5LoopbackStatus OBJECT-TYPE SYNTAX QbF4F5LoopbackStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of loopback Insert command: in-progress, success, timeout." ::= { qbAtmVclEntry 3 } qbAtmVclF4F5LoopbackTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Value of sysUptime when last Insert completed." ::= { qbAtmVclEntry 4 } qbAtmVclMgmtIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Active IP Address for in-band Management SNMP of this chassis." ::= { qbAtmVclEntry 5 } qbAtmVclMgmtIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IP network mask associated with the in-band Management interface." ::= { qbAtmVclEntry 6 } qbAtmVclMgmtNeighborIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the neighbor IP address associated with the in-band Management interface." ::= { qbAtmVclEntry 7 } qbAtmVclConnKind OBJECT-TYPE SYNTAX QbPvcConnKind MAX-ACCESS read-only STATUS current DESCRIPTION "The VCL connection type." ::= { qbAtmVclEntry 8 } qbAtmVclF4F5TxStatus OBJECT-TYPE SYNTAX QbF4F5Status MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted OAM status for the PVC." ::= { qbAtmVclEntry 9 } qbAtmVclF4F5TxLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUPtime when qbAtmVclF4F5TxStatus last changed." ::= { qbAtmVclEntry 10 } qbAtmVclF4F5RxStatus OBJECT-TYPE SYNTAX QbF4F5Status MAX-ACCESS read-only STATUS current DESCRIPTION "The received OAM status of the PVC." ::= { qbAtmVclEntry 11 } qbAtmVclF4F5RxLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUPtime when qbAtmVclF4F5TxStatus last changed." ::= { qbAtmVclEntry 12 } -- **************************************************************** -- Extension to the ATM VPL Table -- **************************************************************** qbAtmVplTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge Table contains an extension to the atmVclConnectTable, An entry in this table models VPLs." ::= { qbAtmObjects 4 } qbAtmVplEntry OBJECT-TYPE SYNTAX QbAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the QB ATM qbAtmVpTable." AUGMENTS { atmVplEntry } ::= { qbAtmVplTable 1 } QbAtmVplEntry ::= SEQUENCE { qbAtmVplLoopback QbEnableStatus, qbAtmVplF4F5LoopbackInsert OCTET STRING, qbAtmVplF4F5LoopbackStatus QbF4F5LoopbackStatus, qbAtmVplF4F5LoopbackTimestamp TimeStamp, qbAtmVplF4F5TxStatus QbF4F5Status, qbAtmVplF4F5TxLastChange TimeStamp, qbAtmVplF4F5RxStatus QbF4F5Status, qbAtmVplF4F5RxLastChange TimeStamp } qbAtmVplLoopback OBJECT-TYPE SYNTAX QbEnableStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable loopback on this ATM VPL" DEFVAL { disable } ::= { qbAtmVplEntry 1 } qbAtmVplF4F5LoopbackInsert OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a loopback Insert object for LLID. Start loopback Insert by setting this to an LLID value." ::= { qbAtmVplEntry 2 } qbAtmVplF4F5LoopbackStatus OBJECT-TYPE SYNTAX QbF4F5LoopbackStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of loopback Insert command: in-progress, success, timeout." ::= { qbAtmVplEntry 3 } qbAtmVplF4F5LoopbackTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Value of sysUptime when last Insert completed." ::= { qbAtmVplEntry 4 } qbAtmVplF4F5TxStatus OBJECT-TYPE SYNTAX QbF4F5Status MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted OAM status for the PVP." ::= { qbAtmVplEntry 5 } qbAtmVplF4F5TxLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUPtime when qbAtmVclF4F5TxStatus last changed." ::= { qbAtmVplEntry 6 } qbAtmVplF4F5RxStatus OBJECT-TYPE SYNTAX QbF4F5Status MAX-ACCESS read-only STATUS current DESCRIPTION "The received OAM status of the PVP." ::= { qbAtmVplEntry 7 } qbAtmVplF4F5RxLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUPtime when qbAtmVclF4F5TxStatus last changed." ::= { qbAtmVplEntry 8 } -- **************************************************************** -- Extension to the ATM VC Cross Connect Table -- **************************************************************** qbAtmVcCrossConnectTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmVcCrossConnectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge Table contains an extension to the atmVcCrossConnectTable, An entry in this table models two cross-connected VCLs." ::= { qbAtmObjects 5 } qbAtmVcCrossConnectEntry OBJECT-TYPE SYNTAX QbAtmVcCrossConnectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the QB ATM atmVcCrossConnectTable." AUGMENTS { atmVcCrossConnectEntry } ::= { qbAtmVcCrossConnectTable 1 } QbAtmVcCrossConnectEntry ::= SEQUENCE { qbAtmVcCrossConnectName DisplayString, qbAtmVcCrossConnectRxTrafficDescrIndex AtmTrafficDescrParamIndex, qbAtmVcCrossConnectTxTrafficDescrIndex AtmTrafficDescrParamIndex } qbAtmVcCrossConnectName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description for the cross connect." DEFVAL { "" } ::= { qbAtmVcCrossConnectEntry 1 } qbAtmVcCrossConnectRxTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCLs cross-connect." DEFVAL { 0 } ::= { qbAtmVcCrossConnectEntry 2} qbAtmVcCrossConnectTxTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCLs cross-connect" DEFVAL { 0 } ::= { qbAtmVcCrossConnectEntry 3 } -- -- Augments atmVpCrossConnectTable -- qbAtmVpCrossConnectTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmVpCrossConnectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge Table contains an extension to the atmVpCrossConnectTable, An entry in this table models two cross-connected VPLs." ::= { qbAtmObjects 6 } qbAtmVpCrossConnectEntry OBJECT-TYPE SYNTAX QbAtmVpCrossConnectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the QB ATM atmVpCrossConnectTable." AUGMENTS { atmVpCrossConnectEntry } ::= { qbAtmVpCrossConnectTable 1 } QbAtmVpCrossConnectEntry ::= SEQUENCE { qbAtmVpCrossConnectName DisplayString, qbAtmVpCrossConnectRxTrafficDescrIndex AtmTrafficDescrParamIndex, qbAtmVpCrossConnectTxTrafficDescrIndex AtmTrafficDescrParamIndex } qbAtmVpCrossConnectName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description for the cross connect." DEFVAL { "" } ::= { qbAtmVpCrossConnectEntry 1 } qbAtmVpCrossConnectRxTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VPLs cross-connect." DEFVAL { 0 } ::= { qbAtmVpCrossConnectEntry 2} qbAtmVpCrossConnectTxTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VPLs cross-connect" DEFVAL { 0 } ::= { qbAtmVpCrossConnectEntry 3 } -- -- Signalling specific group information -- qbAtmSigGroup OBJECT IDENTIFIER ::= { qbAtmObjects 7 } qbAtmPnniNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The QbAtmpnniNodeTable contains attributes that affect the operation of a PNNI logical node. There is a single row in this table for each PNNI peer group that the managed system is expected or eligible to become a member of." ::= { qbAtmSigGroup 1 } qbAtmPnniNodeEntry OBJECT-TYPE SYNTAX QbAtmPnniNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a PNNI logical node in this switching system." INDEX { qbAtmPnniNodeIndex } ::= { qbAtmPnniNodeTable 1 } QbAtmPnniNodeEntry ::= SEQUENCE { qbAtmPnniNodeIndex INTEGER, qbAtmPnniNodeNetAddrPrefix OCTET STRING, qbAtmPnniNodeEndSysId OCTET STRING, qbAtmPnniNodeLevel INTEGER, qbAtmPnniNodeRowStatus RowStatus, qbAtmPnniNodeOperStatus INTEGER, qbAtmPnniNodeAtmAddress QbAtmPnniAtmAddr, qbAtmPnniNodePeerGroupId QbAtmPnniPeerGroupId } qbAtmPnniNodeIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A value assigned to a node in this switching system that uniquely identifies it in the MIB." DEFVAL { 1 } ::= { qbAtmPnniNodeEntry 1 } qbAtmPnniNodeNetAddrPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Network Prefix to use for the ATM End System Address. The value is 13 bytes long, and is specified in the hexadecimal format. If less than 13 bytes(26 chars) are received, the agent appends trailing zero's. The object can be set to ''h, if PNNI protocol is desirable on all interfaces." DEFVAL {''h } ::= { qbAtmPnniNodeEntry 2 } qbAtmPnniNodeEndSysId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the End System Identifier for ATM End System Address. The value is 7 bytes long, and is specified in the hexadecimal format. The object can be set to ''h, if PNNI protocol is desirable on all interfaces." DEFVAL {''h } ::= { qbAtmPnniNodeEntry 3 } qbAtmPnniNodeLevel OBJECT-TYPE SYNTAX INTEGER(1..104) MAX-ACCESS read-create STATUS current DESCRIPTION "The level of PNNI hierarchy at which this node exists. This attribute is used to determine the default node ID and the default peer group ID for this node. This object may only be written when pnniNodeAdminStatus has the value down." DEFVAL { 80 } ::= { qbAtmPnniNodeEntry 4 } qbAtmPnniNodeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, delete, activate and de-activate a Node. Setting this object to createAndGo(4) causes the corresponding row to be created. Setting this object to destroy(6) causes the corresponding row to be deleted. Note that -- currently-- only a single instance of a row can be created in this table." ::= { qbAtmPnniNodeEntry 5 } qbAtmPnniNodeOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Operational Status of the PNNI Node. For Logical Group Nodes, the Operational Status will be up only if the child becomes the PGL." ::= { qbAtmPnniNodeEntry 6 } qbAtmPnniNodeAtmAddress OBJECT-TYPE SYNTAX QbAtmPnniAtmAddr MAX-ACCESS read-only STATUS current DESCRIPTION "This node's ATM End System Address. Remote systems wishing to exchange PNNI protocol packets with this node should direct packets or calls to this address. The current Qb implementation does not support writing this value." REFERENCE "ATM Forum PNNI 1.0 Section 5.2.2" ::= { qbAtmPnniNodeEntry 7 } qbAtmPnniNodePeerGroupId OBJECT-TYPE SYNTAX QbAtmPnniPeerGroupId MAX-ACCESS read-only STATUS current DESCRIPTION "The Peer Group Identifier of the peer group that the given node is to become a member of." REFERENCE "ATM Forum PNNI 1.0 Section 5.3.2, Annex F" ::= { qbAtmPnniNodeEntry 8 } -- -- Interface table --- qbAtmPnniIfTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The qbAtmPnniIfTable contains the attributes necessary to configure a physical interface on a switching system capable of being used for PNNI routing. An ifIndex is used as the instance ID to uniquely identify the interface on the local switching system. This index has the same value as the ifIndex object defined in RFC 1573 for the same interface, since this table correlates with the ifTable in RFC 1573. One row in this table is created by the managed system for each row in the ifTable that has an ifType of atm(37) or atmLogical(80)." ::= { qbAtmSigGroup 2 } qbAtmPnniIfEntry OBJECT-TYPE SYNTAX QbAtmPnniIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing PNNI specific interface information in this switching system." INDEX { ifIndex } ::= { qbAtmPnniIfTable 1 } QbAtmPnniIfEntry ::= SEQUENCE { qbAtmPnniIfNodeIndex INTEGER, qbAtmPnniIfAdmWeightCbr QbAtmPnniWeight, qbAtmPnniIfAdmWeightRtVbr QbAtmPnniWeight, qbAtmPnniIfAdmWeightNrtVbr QbAtmPnniWeight, qbAtmPnniIfAdmWeightAbr QbAtmPnniWeight, qbAtmPnniIfAdmWeightUbr QbAtmPnniWeight, qbAtmPnniIfRccServiceCategory AtmServiceCategory, qbAtmPnniIfRccTrafficDescrIndex AtmTrafficDescrParamIndex, qbAtmPnniIfPolicingStatus INTEGER } qbAtmPnniIfNodeIndex OBJECT-TYPE SYNTAX INTEGER (1..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the node within the switching system that the interface is directly attached to. Note: For this release this value can be set only to 1." DEFVAL { 1 } ::= { qbAtmPnniIfEntry 1 } qbAtmPnniIfAdmWeightCbr OBJECT-TYPE SYNTAX QbAtmPnniWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative weight of this interface for the constant bit rate service category." DEFVAL { 5040 } ::= { qbAtmPnniIfEntry 2 } qbAtmPnniIfAdmWeightRtVbr OBJECT-TYPE SYNTAX QbAtmPnniWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative weight of this interface for the real-time variable bit rate service category." DEFVAL { 5040 } ::= { qbAtmPnniIfEntry 3 } qbAtmPnniIfAdmWeightNrtVbr OBJECT-TYPE SYNTAX QbAtmPnniWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative weight of this interface for the non-real-time variable bit rate service category." DEFVAL { 5040 } ::= { qbAtmPnniIfEntry 4 } qbAtmPnniIfAdmWeightAbr OBJECT-TYPE SYNTAX QbAtmPnniWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative weight of this interface for the available bit rate service category." DEFVAL { 5040 } ::= { qbAtmPnniIfEntry 5 } qbAtmPnniIfAdmWeightUbr OBJECT-TYPE SYNTAX QbAtmPnniWeight MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative weight of this interface for the unspecified bit rate service category." DEFVAL { 5040 } ::= { qbAtmPnniIfEntry 6 } qbAtmPnniIfRccServiceCategory OBJECT-TYPE SYNTAX AtmServiceCategory MAX-ACCESS read-write STATUS current DESCRIPTION "The service category used for the PNNI routing control channel (VCI=18) on this interface." DEFVAL { 4 } ::= { qbAtmPnniIfEntry 7 } qbAtmPnniIfRccTrafficDescrIndex OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The traffic descriptor index referring to the entry in the atmTrafficDescrParamTable defined in RFC 1695 that specifies the traffic allocation for the PNNI routing control channel (VCI=18) on this interface." DEFVAL { 7 } ::= { qbAtmPnniIfEntry 8 } qbAtmPnniIfPolicingStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "If this object is set to enable, the policing is enabled on this interface. If the object is set to 'disable' the policing is disabled." DEFVAL { disable } ::= { qbAtmPnniIfEntry 9 } -- -- Table of routes from nodes to reachable addresses -- qbAtmPnniRouteAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniRouteAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses, and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable address prefixes. The local node index that receives the reachability information, reachable address, address prefix length, and an index that distinguishes between multiple listings of connectivity to a given address prefix from a given local node are combined to form an instance ID for this object." ::= { qbAtmSigGroup 3 } qbAtmPnniRouteAddrEntry OBJECT-TYPE SYNTAX QbAtmPnniRouteAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a reachable address prefix." INDEX { qbAtmPnniNodeIndex, qbAtmPnniRouteAddrIfIndex, qbAtmPnniRouteAddrAddress } ::= { qbAtmPnniRouteAddrTable 1} QbAtmPnniRouteAddrEntry ::= SEQUENCE { qbAtmPnniRouteAddrAddress OCTET STRING, qbAtmPnniRouteAddrIfIndex InterfaceIndex, qbAtmPnniRouteAddrPrefixLength INTEGER, qbAtmPnniRouteAddrRowStatus RowStatus, qbAtmPnniRouteAddrProto INTEGER } qbAtmPnniRouteAddrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local interface over which the reachable address can be reached. " ::= { qbAtmPnniRouteAddrEntry 1 } qbAtmPnniRouteAddrAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(19)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the ATM End System Address prefix." ::= { qbAtmPnniRouteAddrEntry 2 } qbAtmPnniRouteAddrPrefixLength OBJECT-TYPE SYNTAX INTEGER (1..152) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of bits to be applied to the ATM End System Address prefix." DEFVAL { 104 } ::= { qbAtmPnniRouteAddrEntry 3 } qbAtmPnniRouteAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, delete, activate and de-activate a reachable address prefix." ::= { qbAtmPnniRouteAddrEntry 4 } qbAtmPnniRouteAddrProto OBJECT-TYPE SYNTAX INTEGER { iisp(1), pnni(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Routing mechanism through which the connectivity from the advertising node to the reachable address prefix was learned." ::= { qbAtmPnniRouteAddrEntry 5 } -- **************************************************************** -- ATM Intraface Signalling Parameters Table -- Extensions to the ATM Interface Configuration Table -- **************************************************************** qbAtmInterfaceConfSigTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmInterfaceConfSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM local interface configuration parameters, one entry per ATM interface port." ::= { qbAtmSigGroup 4 } qbAtmInterfaceConfSigEntry OBJECT-TYPE SYNTAX QbAtmInterfaceConfSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This list contains additonal ATM interface configuration parameters and state variables." AUGMENTS { atmInterfaceConfEntry } ::= { qbAtmInterfaceConfSigTable 1 } QbAtmInterfaceConfSigEntry ::= SEQUENCE { qbAtmInterfaceConfSigMode QbAtmSigSpec, qbAtmInterfaceConfSigSide INTEGER, qbAtmInterfaceConfSigParseMode INTEGER, qbAtmInterfaceConfSigAdminStatus INTEGER, qbAtmInterfaceConfSigSvcMinVci INTEGER, qbAtmInterfaceConfSigSvcMaxVci INTEGER, qbAtmInterfaceConfSigSvcMinVpi INTEGER, qbAtmInterfaceConfSigSvcMaxVpi INTEGER, qbAtmInterfaceConfSigSvpMinVpi INTEGER, qbAtmInterfaceConfSigSvpMaxVpi INTEGER, qbAtmInterfaceConfSigLastChange AtmVorXLastChange, qbAtmInterfaceConfSigIlmiEnable Boolean } qbAtmInterfaceConfSigMode OBJECT-TYPE SYNTAX QbAtmSigSpec MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ATM interface which is either a UNI (User to Network), PNNI or IISP. To modify the qbAtmInterfaceConfSignType, ifAdminStatus has to be down." DEFVAL {uni31} ::= { qbAtmInterfaceConfSigEntry 1 } qbAtmInterfaceConfSigSide OBJECT-TYPE SYNTAX INTEGER { user(1), network(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The side of ATM interface which is either a user or network side. NotApplicable value implies that qbAtmInterfaceConfSignType is other than uni or iisp." DEFVAL {network} ::= { qbAtmInterfaceConfSigEntry 2 } qbAtmInterfaceConfSigParseMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates to the signalling stack to use strict parsing of the INformation Elements (IEs) within signalling messages. This parameter is set to 'on' for conformance testing. For systems that do not test conformance it is recommended to set the object to 'off'." DEFVAL { off } ::= { qbAtmInterfaceConfSigEntry 3 } qbAtmInterfaceConfSigAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable signalling/sscop on this interface. To modify the qbAtmInterfaceConfSignAdminStatus, ifAdminStatus has to be down." DEFVAL {disabled} ::= { qbAtmInterfaceConfSigEntry 4} qbAtmInterfaceConfSigSvcMinVci OBJECT-TYPE SYNTAX INTEGER (32..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of SVC connection for vci." ::= { qbAtmInterfaceConfSigEntry 5} qbAtmInterfaceConfSigSvcMaxVci OBJECT-TYPE SYNTAX INTEGER (32..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum value of SVC connection for vci." ::= { qbAtmInterfaceConfSigEntry 6} qbAtmInterfaceConfSigSvcMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of SVC connection for vpi." ::= { qbAtmInterfaceConfSigEntry 7} qbAtmInterfaceConfSigSvcMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum value of SVC connection for vpi." ::= { qbAtmInterfaceConfSigEntry 8} qbAtmInterfaceConfSigSvpMinVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of SVP connection for vpi." ::= { qbAtmInterfaceConfSigEntry 9} qbAtmInterfaceConfSigSvpMaxVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum value of SVP connection for vpi." ::= { qbAtmInterfaceConfSigEntry 10} qbAtmInterfaceConfSigLastChange OBJECT-TYPE SYNTAX AtmVorXLastChange MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this interface changed its current administrative state." ::= { qbAtmInterfaceConfSigEntry 11 } qbAtmInterfaceConfSigIlmiEnable OBJECT-TYPE SYNTAX Boolean MAX-ACCESS read-write STATUS current DESCRIPTION "Can be enabled only if signaling is configured. ILMI is enabled by default when signaling is configured on the system and the user may enter the disable option ." ::= { qbAtmInterfaceConfSigEntry 12 } ------------------------------- qb adaptation of atm forum pnni 0055 table --------------------- qbAtmPnniNbrPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniNbrPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The qbAtmPnniNbrPeer Object contains all the attributes necessary to describe the relationship a node in this switching system has with a neighboring node within the same peer group. A concatenation of the Node Identifier of the node within the local switching system and the neighboring peer's Node Identifier is used to form the instance ID for this object. The entire qbAtmPnniNbrPeer object is read-only, reflecting the fact that neighboring peers are discovered dynamically by the PNNI protocol rather than configured." REFERENCE "ATM Forum PNNI 1.0 Sections 5.7, 5.8" ::= { qbAtmSigGroup 5 } qbAtmPnniNbrPeerEntry OBJECT-TYPE SYNTAX QbAtmPnniNbrPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about this node's relationship with a neighboring peer node." REFERENCE "ATM Forum PNNI 1.0 Sections 5.7, 5.8" INDEX { qbAtmPnniNodeIndex, qbAtmPnniPeerRemoteNodeId } ::= { qbAtmPnniNbrPeerTable 1 } QbAtmPnniNbrPeerEntry ::= SEQUENCE { qbAtmPnniPeerRemoteNodeId QbAtmPnniNodeId, qbAtmPnniPeerState INTEGER, qbAtmPnniPeerSvccRccIndex INTEGER, qbAtmPnniPeerPortCount INTEGER, qbAtmPnniPeerRcvDbSums Counter32, qbAtmPnniPeerXmtDbSums Counter32, qbAtmPnniPeerRcvPtsps Counter32, qbAtmPnniPeerXmtPtsps Counter32, qbAtmPnniPeerRcvPtseReqs Counter32, qbAtmPnniPeerXmtPtseReqs Counter32, qbAtmPnniPeerRcvPtseAcks Counter32, qbAtmPnniPeerXmtPtseAcks Counter32 } qbAtmPnniPeerRemoteNodeId OBJECT-TYPE SYNTAX QbAtmPnniNodeId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Node Identifier of the neighboring peer node." ::= { qbAtmPnniNbrPeerEntry 1 } qbAtmPnniPeerState OBJECT-TYPE SYNTAX INTEGER { npdown(1), negotiating(2), exchanging(3), loading(4), full(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of this node's Neighboring Peer State Machine associated with qbAtmPnniPeerRemoteNodeId." REFERENCE "ATM Forum PNNI 1.0 Section 5.7.2" ::= { qbAtmPnniNbrPeerEntry 2 } qbAtmPnniPeerSvccRccIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the SVCC-based RCC being used to communicate with the neighboring peer if one exists. If both the local node and the neighboring peer node are lowest-level nodes, this attribute is set to zero." ::= { qbAtmPnniNbrPeerEntry 3 } qbAtmPnniPeerPortCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of ports that connect to the neighboring peer. If the neighboring peer only communicates via an SVCC-based RCC, the value of this attribute is set to zero. Otherwise it is set to the total number of ports to the neighboring peer in the Hello state 2-WayInside." ::= { qbAtmPnniNbrPeerEntry 4 } qbAtmPnniPeerRcvDbSums OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Database Summary Packets received from the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 5 } qbAtmPnniPeerXmtDbSums OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Database Summary Packets transmitted to the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 6 } qbAtmPnniPeerRcvPtsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSPs received from the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 7 } qbAtmPnniPeerXmtPtsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSPs (re)transmitted to the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 8 } qbAtmPnniPeerRcvPtseReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSE Request packets received from the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 9 } qbAtmPnniPeerXmtPtseReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSE Request packets transmitted to the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 10 } qbAtmPnniPeerRcvPtseAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSE Ack packets received from the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 11 } qbAtmPnniPeerXmtPtseAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of PTSE Ack packets transmitted to the neighboring peer." ::= { qbAtmPnniNbrPeerEntry 12 } -- qbAtmPnniNodePgl Table - based on ATM Forum PGL election table qbAtmPnniNodePglTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniNodePglEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer group leader election information for a PNNI node in this switching system." REFERENCE "ATM Forum PNNI 1.0 Section 5.10.1" ::= { qbAtmSigGroup 6 } qbAtmPnniNodePglEntry OBJECT-TYPE SYNTAX QbAtmPnniNodePglEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing PGL election information of a PNNI logical node in this switching system." REFERENCE "ATM Forum PNNI 1.0 Section 5.10.1" AUGMENTS { qbAtmPnniNodeEntry } ::= { qbAtmPnniNodePglTable 1 } QbAtmPnniNodePglEntry ::= SEQUENCE { qbAtmPnniNodePglLeadershipPriority INTEGER, qbAtmPnniNodeCfgParentNodeIndex Integer32, qbAtmPnniNodePglInitTime Integer32, qbAtmPnniNodePglOverrideDelay Integer32, qbAtmPnniNodePglReelectTime Integer32, qbAtmPnniNodePglState INTEGER, qbAtmPnniNodePreferredPgl QbAtmPnniNodeId, qbAtmPnniNodePeerGroupLeader QbAtmPnniNodeId, qbAtmPnniNodePglTimeStamp TimeStamp, qbAtmPnniNodeActiveParentNodeId QbAtmPnniNodeId } qbAtmPnniNodePglLeadershipPriority OBJECT-TYPE SYNTAX INTEGER (0..205) MAX-ACCESS read-create STATUS current DESCRIPTION "The Leadership priority value this node should advertise in its nodal information group for the given peer group. Only the value zero can be used with nodes that are not PGL/LGN capable. If there is no configured parent node index or no corresponding entry in the pnniNodeTable, then the advertised leadership priority is zero regardless of this value." REFERENCE "ATM Forum PNNI 1.0 Section 5.10.1.2" DEFVAL { 0 } ::= { qbAtmPnniNodePglEntry 1 } qbAtmPnniNodeCfgParentNodeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The local node index used to identify the node that will represent this peer group at the next higher level of hierarchy, if this node becomes peer group leader. The value 0 indicates that there is no parent node." REFERENCE "ATM Forum PNNI 1.0 Annex F" DEFVAL { 0 } ::= { qbAtmPnniNodePglEntry 2 } qbAtmPnniNodePglInitTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time in seconds this node will delay advertising its choice of preferred PGL after having initialized operation and reached the full state with at least one neighbor in the peer group." REFERENCE "ATM Forum PNNI 1.0 Annex G PGLInitTime" DEFVAL { 15 } ::= { qbAtmPnniNodePglEntry 3 } qbAtmPnniNodePglOverrideDelay OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time in seconds a node will wait for itself to be declared the preferred PGL by unanimous agreement among its peers. In the absence of unanimous agreement this will be the amount of time that will pass before this node considers a two thirds majority as sufficient agreement to declare itself peer group leader, abandoning the attempt to get unanimous agreement." REFERENCE "ATM Forum PNNI 1.0 Annex G OverrideDelay" DEFVAL { 30 } ::= { qbAtmPnniNodePglEntry 4 } qbAtmPnniNodePglReelectTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time in seconds after losing connectivity to the current peer group leader, that this node will wait before re-starting the process of electing a new peer group leader." REFERENCE "ATM Forum PNNI 1.0 Annex G ReElectionInterval" DEFVAL { 15 } ::= { qbAtmPnniNodePglEntry 5 } qbAtmPnniNodePglState OBJECT-TYPE SYNTAX INTEGER { starting(1), awaiting(2), awaitingFull(3), initialDelay(4), calculating(5), awaitUnanimity(6), operPgl(7), operNotPgl(8), hungElection(9), awaitReElection(10), other(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state that this node is in with respect to the Peer Group Leader election that takes place in the node's peer group. The values are enumerated in the Peer Group Leader State Machine." REFERENCE "ATM Forum PNNI 1.0 Section 5.10.1.1.2" ::= { qbAtmPnniNodePglEntry 6 } qbAtmPnniNodePreferredPgl OBJECT-TYPE SYNTAX QbAtmPnniNodeId MAX-ACCESS read-only STATUS current DESCRIPTION "The Node ID of the node which the local node believes should be or become the peer group leader. This is also the value the local node is currently advertising in the `Preferred Peer Group Leader Node ID' field of its nodal information group within the given peer group. If a Preferred PGL has not been chosen, this attribute's value is set to (all) zero(s)." REFERENCE "ATM Forum PNNI 1.0 Section 5.10.1.1.6" ::= { qbAtmPnniNodePglEntry 7 } qbAtmPnniNodePeerGroupLeader OBJECT-TYPE SYNTAX QbAtmPnniNodeId MAX-ACCESS read-only STATUS current DESCRIPTION "The Node Identifier of the node which is currently operating as peer group leader of the peer group this node belongs to. If a PGL has not been elected, this attribute's value is set to (all) zero(s)." ::= { qbAtmPnniNodePglEntry 8 } qbAtmPnniNodePglTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the current Peer Group Leader established itself." ::= { qbAtmPnniNodePglEntry 9 } qbAtmPnniNodeActiveParentNodeId OBJECT-TYPE SYNTAX QbAtmPnniNodeId MAX-ACCESS read-only STATUS current DESCRIPTION "The Node Identifier value being used by the Peer Group Leader to represent this peer group at the next higher level of the hierarchy. If this node is at the highest level of the hierarchy or if no PGL has yet been elected the PNNI Protocol Entity sets the value of this attribute to (all) zero(s)." ::= { qbAtmPnniNodePglEntry 10 } -- initial timer values table - based on atm forum's qbAtmPnniNodeTimerTable qbAtmPnniNodeTimerTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniNodeTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of initial PNNI timer values and significant change thresholds." ::= { qbAtmSigGroup 7 } qbAtmPnniNodeTimerEntry OBJECT-TYPE SYNTAX QbAtmPnniNodeTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing initial PNNI timer values and significant change thresholds of a PNNI logical node in this switching system." AUGMENTS { qbAtmPnniNodeEntry } ::= { qbAtmPnniNodeTimerTable 1 } QbAtmPnniNodeTimerEntry ::= SEQUENCE { qbAtmPnniNodePtseHolddown Integer32, qbAtmPnniNodeHelloHolddown Integer32, qbAtmPnniNodeHelloInterval Integer32, qbAtmPnniNodeHelloInactivityFactor Integer32, qbAtmPnniNodeHlinkInact Integer32, qbAtmPnniNodePtseRefreshInterval Integer32, qbAtmPnniNodePtseLifetimeFactor INTEGER, qbAtmPnniNodeRxmtInterval Integer32, qbAtmPnniNodePeerDelayedAckInterval Integer32, qbAtmPnniNodeAvcrPm INTEGER, qbAtmPnniNodeAvcrMt INTEGER, qbAtmPnniNodeCdvPm INTEGER, qbAtmPnniNodeCtdPm INTEGER } qbAtmPnniNodePtseHolddown OBJECT-TYPE SYNTAX Integer32 UNITS "100 milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial value for the PTSE hold down timer that will be used by the given node to limit the rate at which it can re-originate PTSEs. It must be a positive non-zero number." REFERENCE "ATM Forum PNNI 1.0 Annex G MinPTSEInterval" DEFVAL { 10 } ::= { qbAtmPnniNodeTimerEntry 1 } qbAtmPnniNodeHelloHolddown OBJECT-TYPE SYNTAX Integer32 UNITS "100 milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial value for the Hello hold down timer that will be used by the given node to limit the rate at which it sends Hellos. It must be a positive non-zero number." REFERENCE "ATM Forum PNNI 1.0 Annex G MinHelloInterval" DEFVAL { 10 } ::= { qbAtmPnniNodeTimerEntry 2 } qbAtmPnniNodeHelloInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval." REFERENCE "ATM Forum PNNI 1.0 Annex G HelloInterval" DEFVAL { 15 } ::= { qbAtmPnniNodeTimerEntry 3 } qbAtmPnniNodeHelloInactivityFactor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down." REFERENCE "ATM Forum PNNI 1.0 Annex G InactivityFactor" DEFVAL { 5 } ::= { qbAtmPnniNodeTimerEntry 4 } qbAtmPnniNodeHlinkInact OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time a node will continue to advertise a horizontal (logical) link for which it has not received and processed a LGN Horizontal Link information group." REFERENCE "ATM Forum PNNI 1.0 Annex G HorizontalLinkInactivityTime" DEFVAL { 120 } ::= { qbAtmPnniNodeTimerEntry 5 } qbAtmPnniNodePtseRefreshInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial value for the Refresh timer that this node will use to drive (re-)origination of PTSEs in the absence of triggered updates." REFERENCE "ATM Forum PNNI 1.0 Annex G PTSERefreshInterval" DEFVAL { 1800 } ::= { qbAtmPnniNodeTimerEntry 6 } qbAtmPnniNodePtseLifetimeFactor OBJECT-TYPE SYNTAX INTEGER (101..1000) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value for the lifetime multiplier, expressed as a percentage. The result of multiplying the qbAtmPnniNodePtseRefreshInterval attribute value by this attribute value is used as the initial lifetime that this node places into self-originated PTSEs." REFERENCE "ATM Forum PNNI 1.0 Annex G PTSELifetimeFactor" DEFVAL { 200 } ::= { qbAtmPnniNodeTimerEntry 7 } qbAtmPnniNodeRxmtInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets, and PTSPs." REFERENCE "ATM Forum PNNI 1.0 Annex G DSRxmtInterval, RequestRxmtInterval, PTSERetransmissionInterval" DEFVAL { 5 } ::= { qbAtmPnniNodeTimerEntry 8 } qbAtmPnniNodePeerDelayedAckInterval OBJECT-TYPE SYNTAX Integer32 UNITS "100 milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum amount of time between transmissions of delayed PTSE acknowledgement packets." REFERENCE "ATM Forum PNNI 1.0 Annex G PeerDelayedAckInterval, Appendix G" DEFVAL { 10 } ::= { qbAtmPnniNodeTimerEntry 9 } qbAtmPnniNodeAvcrPm OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The proportional multiplier used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage." REFERENCE "ATM Forum PNNI 1.0 Section 5.8.5.2.5.4, Annex G AvCR_PM" DEFVAL { 50 } ::= { qbAtmPnniNodeTimerEntry 10 } qbAtmPnniNodeAvcrMt OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum threshold used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage." REFERENCE "ATM Forum PNNI 1.0 Section 5.8.5.2.5.4, Annex G AvCR_mT" DEFVAL { 3 } ::= { qbAtmPnniNodeTimerEntry 11 } qbAtmPnniNodeCdvPm OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The proportional multiplier used in the algorithms that determine significant change for CDV metrics, expressed as a percentage." REFERENCE "ATM Forum PNNI 1.0 Section 5.8.5.2.5.6, Annex G CDV_PM" DEFVAL { 25 } ::= { qbAtmPnniNodeTimerEntry 12 } qbAtmPnniNodeCtdPm OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The proportional multiplier used in the algorithms that determine significant change for CTD metrics, expressed as a percentage." REFERENCE "ATM Forum PNNI 1.0 Section 5.8.5.2.5.5, Annex G maxCTD_PM" DEFVAL { 50 } ::= { qbAtmPnniNodeTimerEntry 13 } -- qbAtmPnniLink table - based on ATM Forum PNNI Link Table qbAtmPnniLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmPnniLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the attributes necessary to describe the operation of logical links attached to the local switching system and the relationship with the neighbor nodes on the other end of the links. Links are attached to a specific node within the switching system. A concatenation of the Node Index of the node within the local switching system and the port ID are used as the instance ID to uniquely identify the link. Links may represent horizontal links between lowest level neighboring peers, outside links, uplinks, or horizontal links to/from LGNs. The entire qbAtmPnniLink object is read-only, reflecting the fact that this information is discovered dynamically by the PNNI protocol rather than configured." REFERENCE "ATM Forum PNNI 1.0 Section 5.6" ::= { qbAtmSigGroup 8 } qbAtmPnniLinkEntry OBJECT-TYPE SYNTAX QbAtmPnniLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a link attached to a PNNI logical node in this switching system." REFERENCE "ATM Forum PNNI 1.0 Section 5.6" INDEX { qbAtmPnniNodeIndex, qbAtmPnniLinkPortId } ::= { qbAtmPnniLinkTable 1 } QbAtmPnniLinkEntry ::= SEQUENCE { qbAtmPnniLinkPortId Integer32, qbAtmPnniLinkType INTEGER, qbAtmPnniLinkHelloState QbAtmPnniHelloState } qbAtmPnniLinkPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port Identifier of the link as selected by the local node. This value has meaning only within the context of the node to which the port is attached." ::= { qbAtmPnniLinkEntry 1 } qbAtmPnniLinkType OBJECT-TYPE SYNTAX INTEGER { unknown(1), lowestLevelHorizontalLink(2), horizontalLinkToFromLgn(3), lowestLevelOutsideLink(4), uplink(5), outsideLinkAndUplink(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of link being described." ::= { qbAtmPnniLinkEntry 2 } qbAtmPnniLinkHelloState OBJECT-TYPE SYNTAX QbAtmPnniHelloState MAX-ACCESS read-only STATUS current DESCRIPTION "For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the state of the Hello protocol exchange over this link. For links to/from LGNs, this attribute indicates the state of the corresponding LGN Horizontal Link Hello State Machine. For uplinks (where the port ID is not also used for the underlying outside link), this attribute is set to notApplicable." REFERENCE "ATM Forum PNNI 1.0 Section 5.6.2.1.2" ::= { qbAtmPnniLinkEntry 3 } -- **************************************************************** -- Extension to the ATM VCL Table for hidden interfaces -- **************************************************************** qbAtmHiddenVclTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmHiddenVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The QB table with extensions to atmVclTable" ::= { qbAtmObjects 8 } qbAtmHiddenVclEntry OBJECT-TYPE SYNTAX QbAtmHiddenVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in qbAtmHiddenVclTable" AUGMENTS { atmVclEntry } ::= { qbAtmHiddenVclTable 1 } QbAtmHiddenVclEntry ::= SEQUENCE { qbAtmHiddenVclName DisplayString, qbAtmHiddenVclType INTEGER, qbAtmHiddenVclIfIndex InterfaceIndex, qbAtmHiddenVclVtIndex INTEGER } qbAtmHiddenVclName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description for the SPVC name." DEFVAL { "" } ::= { qbAtmHiddenVclEntry 1 } qbAtmHiddenVclType OBJECT-TYPE SYNTAX INTEGER { native (1), non-native (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Value for the interface type. Native ATM - Q155, S622; non-native - E1, DS1, ENET, VT" ::= { qbAtmHiddenVclEntry 2 } qbAtmHiddenVclIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "ifIndex value for IOT interface. This value is not used for native ATM interfaces." ::= { qbAtmHiddenVclEntry 3 } qbAtmHiddenVclVtIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Address information for a VT card. This value is used for VT cards only." ::= { qbAtmHiddenVclEntry 4 } -- **************************************************************** -- This section defines the swicth statistics collected -- **************************************************************** qbAtmSwitchModuleGroup OBJECT IDENTIFIER ::= { qbAtmObjects 9 } qbAtmStatsBuffOverCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of cells discarded due to buffer overflows." ::= { qbAtmSwitchModuleGroup 1 } qbAtmStatsInvalidCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of cells discarded due to unknown VPI/VCI." ::= { qbAtmSwitchModuleGroup 2 } qbAtmStatsInvUpdateCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of cells discarded due to internal switch errors." ::= { qbAtmSwitchModuleGroup 3 } -- ************************************************************** -- ATM Interface Statistics Table -- ************************************************************** qbAtmInterfaceStatTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmInterfaceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Quantum Bridge ATM Interface Statistic Table contains ATM layer statistics for each ATM interface." ::= { qbAtmObjects 10 } qbAtmInterfaceStatEntry OBJECT-TYPE SYNTAX QbAtmInterfaceStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Quantum ATM Interface Table. Every ATM interface contains a corresponding entry in the table." INDEX { ifIndex } ::= { qbAtmInterfaceStatTable 1 } QbAtmInterfaceStatEntry ::= SEQUENCE { qbAtmInterfaceStatTxOAMCells Counter32, qbAtmInterfaceStatRxOAMCells Counter32 } qbAtmInterfaceStatTxOAMCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of valid OAM cells transmitted by this atm layer interface." ::= { qbAtmInterfaceStatEntry 1 } qbAtmInterfaceStatRxOAMCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OAS ATM cells received by this atm layer interface." ::= { qbAtmInterfaceStatEntry 2 } -- -- This table defines a set of in-band management IP addresses and the ATM connections -- that can access them. It is based largely on the MIB defined in Sudha Mulpur's document -- 'Multiple In-Band Management PVC/Soft PVC Functional and Design Specification'. -- qbAtmInBandMgtTable OBJECT-TYPE SYNTAX SEQUENCE OF QbAtmInBandMgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The QbAtmInBandMgtTable defines in-band Management IP channels for use by ATM connections." ::= { qbAtmObjects 11 } qbAtmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {qbAtmObjects 12} qbAtmPkt OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is to define a connection with an Ethernet endpoint, and it is for a user that does not want to use ATM parameters directly. The EtherNet bandwidth will be converted to a nrtVbr traffic descriptor. The conversion from Ethernet bandwidth to ATM cell rate must add an ATM cell tax. This is defined using the pcbe (packet-to-cell bandwidth expansion) factor. If this is not defined for the traffic descriptor, then the system default (qbAtmDefaultPCBE)should be used. The use of the parameter vector for this type: Parameter 1: minbw, the minimum guarnteed bandwidth fo rthe connection. This is defined in Mb/sec. (0-100). Parameter 2: maxbw, the maximum bursting capability of the connection. This is defined in Mb/sec (1-100). It is default to minbw. Parameter 3: bw, indicates the bandwidth for the PON segment. Vaules are expressed in Mb, and may take interger value between 1 and 100. (only apply to 155Mb PON). It is default to minbw. Parameter 4: pcbe, it defines the packed-to-cell bandwidth expansion. This is the percentage overhead that is used to convert Ethernet bandwidth to ATM cell rates. It is default to qbAtmDefaultPCBE. Parameter 5: not used." REFERENCE "" ::= {qbAtmTrafficDescriptorTypes 1} qbAtmInBandMgtEntry OBJECT-TYPE SYNTAX QbAtmInBandMgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about an in-band Management channel." INDEX { qbAtmInBandMgtIpAddr } ::= { qbAtmInBandMgtTable 1 } QbAtmInBandMgtEntry ::= SEQUENCE { qbAtmInBandMgtIpAddr IpAddress, qbAtmInBandMgtIpMask IpAddress, qbAtmInBandMgtIpIfIndex InterfaceIndex, qbAtmInBandMgtNeighborIp IpAddress, qbAtmInBandMgtIfIndex InterfaceIndex, qbAtmInBandMgtVpi AtmVpIdentifier, qbAtmInBandMgtVci AtmVcIdentifier, qbAtmInBandMgtConnKind AtmConnKind, qbAtmInBandMgtTxTd AtmTrafficDescrParamIndex, qbAtmInBandMgtRxTd AtmTrafficDescrParamIndex, qbAtmInBandMgtTargetNsapAddr AtmAddr, qbAtmInBandMgtRowStatus RowStatus } qbAtmInBandMgtIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP Address for in-band SNMP Management of this chassis." ::= { qbAtmInBandMgtEntry 1 } qbAtmInBandMgtIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Network Mask associated with this in-band SNMP Management IP Address." ::= { qbAtmInBandMgtEntry 2 } qbAtmInBandMgtIpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Interface associated with this in-band management address." ::= { qbAtmInBandMgtEntry 3 } qbAtmInBandMgtNeighborIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is the neighbor IP address associated with the in-band Management Interface. If the qbAtmInBandMgtConnKind is any value other than pvc(1), this object is non-applicable." ::= { qbAtmInBandMgtEntry 4 } qbAtmInBandMgtIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This is the interface index associated with the in-band Management connection. If the qbAtmInBandMgtConnKind is any value other than pvc(1), this object is non-applicable." ::= { qbAtmInBandMgtEntry 5 } qbAtmInBandMgtVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of qbAtmInBandMgtConnKind is pvc(1), this is the VPI associated with this in-band management connection. If the value of qbAtmInBandMgtConnKind is spvcInitiator(4), this object is target VPI. In all other cases, the value of this object is non-applicable." ::= { qbAtmInBandMgtEntry 6 } qbAtmInBandMgtVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of qbAtmInBandMgtConnKind is pvc(1), this is the VCI associated with this in-band management connection. If the value of qbAtmInBandMgtConnKind is spvcInitiator(4), this object is target VCI. In all other cases, the value of this object is non-applicable." ::= { qbAtmInBandMgtEntry 7 } qbAtmInBandMgtConnKind OBJECT-TYPE SYNTAX AtmConnKind MAX-ACCESS read-create STATUS current DESCRIPTION "This is the connection type associated with the in-band Management connection. The currently accepted types are pvc(1), spvcInitiator(4) and spvcTarget(5)." ::= { qbAtmInBandMgtEntry 8 } qbAtmInBandMgtTxTd OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Transmit traffic descriptor associated with this in-band management channel." ::= { qbAtmInBandMgtEntry 9 } qbAtmInBandMgtRxTd OBJECT-TYPE SYNTAX AtmTrafficDescrParamIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Receive traffic descriptor associated with this in-band management channel." ::= { qbAtmInBandMgtEntry 10 } qbAtmInBandMgtTargetNsapAddr OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of qbAtmInBandMgtConnKind is spvcInitiator(4) this object represetns the Target NSAP Address of the connection. In all other cases, the value of this object is non-applicable." ::= { qbAtmInBandMgtEntry 11 } qbAtmInBandMgtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, or delete an Entry in this table. Setting this object to createAndGo(4) causes the corresponding row to be created. Setting this object to destroy(6) causes the corresponding row to be deleted. Note that -- currently-- only a single instance of a row can be created in this table." ::= { qbAtmInBandMgtEntry 12 } -- **************************************************************** -- Conformance Information -- **************************************************************** qbAtmCompliances OBJECT IDENTIFIER ::= { qbAtmConformance 1 } qbAtmGroups OBJECT IDENTIFIER ::= { qbAtmConformance 2 } -- -- Compliance Statements -- -- -- All Object Groups -- qbAtmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB." MODULE -- this module MANDATORY-GROUPS { qbAtmInterfaceConfGroupInfo, qbAtmTrafficDescrParamGroupInfo, qbAtmVclGroupInfo, qbAtmVplGroupInfo, qbAtmVcCrossConnectGroupInfo, qbAtmVpCrossConnectGroupInfo, qbAtmPnniNodeGroupInfo, qbAtmPnniIfGroupInfo, qbAtmPnniRouteAddrGroupInfo, qbAtmInterfaceConfSigGroupInfo, qbAtmHiddenVclGroupInfo , qbAtmPnniNbrPeerGroupInfo, qbAtmInBandMgtGroupInfo } ::= { qbAtmCompliances 1 } qbAtmInterfaceConfGroupInfo OBJECT-GROUP OBJECTS { qbAtmInterfaceConfPolicingStatus, qbAtmInterfaceConfMaxPvcVci, qbAtmInterfaceConfMinPvcVci, qbAtmInterfaceConfMaxPvcVpi, qbAtmInterfaceConfMinPvcVci, qbAtmInterfaceConfMaxPvpVpi, qbAtmInterfaceConfMinPvpVpi } STATUS current DESCRIPTION "The set of all accessible objects in the Interface group of this MIB." ::= { qbAtmGroups 1 } qbAtmTrafficDescrParamGroupInfo OBJECT-GROUP OBJECTS { qbAtmTrafficDescrParamName, qbAtmTrafficDescrParamDefault } STATUS current DESCRIPTION "The set of all accessible objects in the Traffic group of this MIB." ::= { qbAtmGroups 2 } qbAtmVclGroupInfo OBJECT-GROUP OBJECTS { qbAtmVclLoopback, qbAtmVclLoopback, qbAtmVclF4F5LoopbackInsert, qbAtmVclF4F5LoopbackStatus, qbAtmVclF4F5LoopbackTimestamp, qbAtmVclMgmtIpAddr, qbAtmVclMgmtIpMask, qbAtmVclMgmtNeighborIP, qbAtmVclConnKind } STATUS current DESCRIPTION "The set of all accessible objects in the VCL group of this MIB." ::= { qbAtmGroups 3 } qbAtmVplGroupInfo OBJECT-GROUP OBJECTS { qbAtmVplLoopback, qbAtmVplF4F5LoopbackInsert, qbAtmVplF4F5LoopbackStatus, qbAtmVplF4F5LoopbackTimestamp } STATUS current DESCRIPTION "The set of all accessible objects in the VPL group of this MIB." ::= { qbAtmGroups 4 } qbAtmVcCrossConnectGroupInfo OBJECT-GROUP OBJECTS { qbAtmVcCrossConnectName, qbAtmVcCrossConnectRxTrafficDescrIndex, qbAtmVcCrossConnectTxTrafficDescrIndex } STATUS current DESCRIPTION "The set of all accessible objects in the VPL group of this MIB." ::= { qbAtmGroups 5 } qbAtmVpCrossConnectGroupInfo OBJECT-GROUP OBJECTS { qbAtmVpCrossConnectName, qbAtmVpCrossConnectRxTrafficDescrIndex, qbAtmVpCrossConnectTxTrafficDescrIndex } STATUS current DESCRIPTION "The set of all accessible objects in the VPL group of this MIB." ::= { qbAtmGroups 6 } qbAtmPnniNodeGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniNodeNetAddrPrefix, qbAtmPnniNodeEndSysId, qbAtmPnniNodeLevel, qbAtmPnniNodeRowStatus, qbAtmPnniNodeOperStatus, qbAtmPnniNodeAtmAddress, qbAtmPnniNodePeerGroupId } STATUS current DESCRIPTION "The set of all accessible objects in the VPL group of this MIB." ::= { qbAtmGroups 7 } qbAtmPnniIfGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniRouteAddrPrefixLength, qbAtmPnniRouteAddrRowStatus, qbAtmPnniRouteAddrProto } STATUS current DESCRIPTION "The set of all accessible objects in the PNNI interface group of this MIB." ::= { qbAtmGroups 8 } qbAtmPnniRouteAddrGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniIfAdmWeightCbr, qbAtmPnniIfAdmWeightRtVbr, qbAtmPnniIfAdmWeightNrtVbr, qbAtmPnniIfAdmWeightAbr, qbAtmPnniIfAdmWeightUbr, qbAtmPnniIfRccServiceCategory, qbAtmPnniIfRccTrafficDescrIndex } STATUS current DESCRIPTION "The set of all accessible objects in the Route group of this MIB." ::= { qbAtmGroups 9 } qbAtmInterfaceConfSigGroupInfo OBJECT-GROUP OBJECTS { qbAtmInterfaceConfSigMode, qbAtmInterfaceConfSigSide, qbAtmInterfaceConfSigParseMode, qbAtmInterfaceConfSigAdminStatus, qbAtmInterfaceConfSigSvcMinVci, qbAtmInterfaceConfSigSvcMaxVci, qbAtmInterfaceConfSigSvcMinVpi, qbAtmInterfaceConfSigSvcMaxVpi, qbAtmInterfaceConfSigSvpMinVpi, qbAtmInterfaceConfSigSvpMaxVpi, qbAtmInterfaceConfSigLastChange } STATUS current DESCRIPTION "The set of all accessible objects in the Route group of this MIB." ::= { qbAtmGroups 10 } qbAtmPnniNbrPeerGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniPeerState, qbAtmPnniPeerSvccRccIndex, qbAtmPnniPeerPortCount, qbAtmPnniPeerRcvDbSums, qbAtmPnniPeerXmtDbSums, qbAtmPnniPeerRcvPtsps, qbAtmPnniPeerXmtPtsps, qbAtmPnniPeerRcvPtseReqs, qbAtmPnniPeerXmtPtseReqs, qbAtmPnniPeerRcvPtseAcks, qbAtmPnniPeerXmtPtseAcks } STATUS current DESCRIPTION "The set of all accessible objects in the PNNI Peer Nbr group of this MIB." ::= { qbAtmGroups 11 } qbAtmPnniPglGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniNodePglLeadershipPriority, qbAtmPnniNodeCfgParentNodeIndex, qbAtmPnniNodePglInitTime, qbAtmPnniNodePglOverrideDelay, qbAtmPnniNodePglReelectTime, qbAtmPnniNodePglState, qbAtmPnniNodePreferredPgl, qbAtmPnniNodePeerGroupLeader, qbAtmPnniNodePglTimeStamp, qbAtmPnniNodeActiveParentNodeId } STATUS current DESCRIPTION "The set of all accessible objects in the PGL group of this MIB." ::= { qbAtmGroups 12 } qbAtmPnniTimerGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniNodePtseHolddown, qbAtmPnniNodeHelloHolddown, qbAtmPnniNodeHelloInterval, qbAtmPnniNodeHelloInactivityFactor, qbAtmPnniNodeHlinkInact, qbAtmPnniNodePtseRefreshInterval, qbAtmPnniNodePtseLifetimeFactor, qbAtmPnniNodeRxmtInterval, qbAtmPnniNodePeerDelayedAckInterval, qbAtmPnniNodeAvcrPm, qbAtmPnniNodeAvcrMt, qbAtmPnniNodeCdvPm, qbAtmPnniNodeCtdPm } STATUS current DESCRIPTION "The set of all accessible objects in the PNNI Timer group of this MIB." ::= { qbAtmGroups 13 } qbAtmPnniLinkGroupInfo OBJECT-GROUP OBJECTS { qbAtmPnniLinkType, qbAtmPnniLinkHelloState } STATUS current DESCRIPTION "The set of all accessible objects in the PNNI Link group of this MIB." ::= { qbAtmGroups 14 } qbAtmInBandMgtGroupInfo OBJECT-GROUP OBJECTS { qbAtmInBandMgtIpMask, qbAtmInBandMgtIpIfIndex, qbAtmInBandMgtNeighborIp, qbAtmInBandMgtIfIndex, qbAtmInBandMgtVpi, qbAtmInBandMgtVci, qbAtmInBandMgtConnKind, qbAtmInBandMgtTxTd, qbAtmInBandMgtRxTd, qbAtmInBandMgtTargetNsapAddr, qbAtmInBandMgtRowStatus } STATUS current DESCRIPTION "The set of all accessible objects in the in-band management group of this MIB." ::= { qbAtmGroups 15 } END