-- MIB file created 07-Jan-2004 18:20:47, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-ATM-VIRTUAL-IF-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-ATM-VIRTUAL-IF-MIB.my" -- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T" IMPORTS RowStatus FROM SNMPv2-TC-v1 AtmVpIdentifier FROM ATM-TC-MIB InterfaceIndex, ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; ciscoAtmVirtualIfMIB OBJECT IDENTIFIER ::= { ciscoMgmt 129 } -- MODULE-IDENTITY -- LastUpdated -- 200210110000Z -- OrgName -- Cisco Systems, Inc. -- ContactInfo -- Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-wanatm@cisco.com -- Descr -- The MIB module to manage ATM Virtual interface objects. -- ATM virtual interfaces are configured on a physical line. -- RevDate -- 200210110000Z -- RevDescr -- 1. Added caviIngressIntervalTable. -- RevDate -- 200205070000Z -- RevDescr -- 1. Added following objects to caviStatEgressTable, as -- upper 32-bits for 64-bit wide counters: -- caviHighEgrRcvClp0Cells, caviHighEgrRcvClp1Cells, -- caviHighEgrClp0DiscCells, caviHighEgrClp1DiscCells, -- caviHighEgrXmtClp0Cells, caviHighEgrXmtClp1Cells. -- 2. Added following 64-bit objects to -- caviStatEgressTable for 64-bit counter support: -- caviHEgrRcvClp0Cells, caviHEgrClp0DiscCells, -- caviHEgrClp0DiscCells, caviHEgrClp1DiscCells. -- 3. Added following objects to caviEgressIntervalTable, -- as upper 32-bits for 64-bit wide counters: -- caviHighIntEgrRcvClp0Cells, -- caviHighIntEgrRcvClp1Cells, -- caviHighIntEgrClp0DiscCells, -- caviHighIntEgrClp1DiscCells, -- caviHighIntEgrXmtClp0Cells, -- caviHighIntEgrXmtClp1Cells. -- 4. Added following 64-bit objects to -- caviEgressIntervalTable: -- caviHIntEgrRcvClp0Cells, caviHIntEgrRcvClp1Cells, -- caviHIntEgrClp0DiscCells, caviHIntEgrClp1DiscCells, -- caviHIntEgrXmtClp0Cells, caviHIntEgrXmtClp1Cells. -- 5. Added following objects to caviStatIngressTable, as -- upper 32-bits for 64-bit wide counters: -- caviHighIngRcvClp0Cells, caviHighIngRcvClp1Cells, -- caviHighIngClp0DiscCells, caviHighIngClp1DiscCells, -- caviHighIngXmtClp0Cells, caviHighIngXmtClp1Cells. -- 6. Added following 64-bit objects to -- caviStatIngressTable: -- caviHIngClp0DiscCells, caviHIngClp1DiscCells, -- caviHIngXmtClp0Cells, caviHIngXmtClp1Cells. -- 7. Changed IMPORT for Unsigned32 to SNMPv2-SMI, instead -- of CISCO-TC. -- RevDate -- 200109030000Z -- RevDescr -- Added caviMinVpiNum and caviMaxVpiNum. Modified description -- for caviEntry and caviIfType. -- RevDate -- 200008110000Z -- RevDescr -- Changed description of objects caviMinRate and caviMaxRate. -- Modified range for caviMinRate, caviMaxRate and -- caviFileId. -- RevDate -- 200001140000Z -- RevDescr -- Initial version of this MIB module. ciscoAtmVirtualIfMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIB 1 } caviConfig OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIBObjects 1 } caviStatistics OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIBObjects 2 } caviMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIB 3 } caviMIBCompliances OBJECT IDENTIFIER ::= { caviMIBConformance 1 } caviMIBGroups OBJECT IDENTIFIER ::= { caviMIBConformance 2 } caviTable OBJECT-TYPE SYNTAX SEQUENCE OF CaviEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used for creating ATM virtual Interfaces. The ATM virtual interfaces are created on physical interfaces. For each entry created in this table, there will be an entry created in the ifTable with ifType atmVirtual(149). For each entry deleted from this table, the corresponding entry from ifTable will be deleted. The ifIndex value for ifType atmVirtual(149) is used for indexing to atmInterfaceConfTable for getting information on a ATM virtual interface." ::= { caviConfig 1 } caviEntry OBJECT-TYPE SYNTAX CaviEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the caviTable table for each ATM virtual interface. An entry in this table can only be created if values for all objects in a row are provided. The caviVpiNum object is applicable only to interfaces of caviIfType vnni (3) or vuni (4). The caviMinVpiNum and caviMaxVpiNum are applicable only to interfaces of caviIfType evuni(5) or evnni(6)." INDEX { caviIndex } ::= { caviTable 1 } CaviEntry ::= SEQUENCE { caviIndex INTEGER, caviPhyIfIndex InterfaceIndex, caviViIfIndex InterfaceIndex, caviMinRate Gauge, caviMaxRate Gauge, caviFileId Gauge, caviIfType INTEGER, caviVpiNum AtmVpIdentifier, caviRowStatus RowStatus, caviMinVpiNum AtmVpIdentifier, caviMaxVpiNum AtmVpIdentifier } caviIndex OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for the ATM virtual interface." ::= { caviEntry 1 } caviPhyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the interface number ( 'ifIndex' ) assigned to sonet(39),ds3(30),ds1(18),atmIma(107)." ::= { caviEntry 2 } caviViIfIndex OBJECT-TYPE SYNTAX InterfaceIndex -- Rsyntax INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the ATM virtual interface number ('ifIndex') assigned to this entry, and is used to identify corresponding rows in the IF-MIB. Note that re-inititalization of the management agent may cause a client's 'caviViIfIndex' to change." ::= { caviEntry 3 } caviMinRate OBJECT-TYPE SYNTAX Gauge -- Units -- cells-per-second ACCESS read-write STATUS mandatory DESCRIPTION "ATM virtual interface's guaranteed cell rate. This is the guaranteed bandwidth allocated for the interface. The sum of caviMinRate of all ATM virtual interfaces configured on a single physical line, must not exceed the bandwidth of the physical line. Creation of a row is rejected when the sum of caviMinRate of all existing ATM virtual interfaces exceeds the physical line bandwidth. The value of this object can't exceed the 'ifSpeed' or 'ifHighSpeed' value in ifTable for the associated 'caviPhyIfIndex'. ATM cell bandwidths for various physical lines are: OC192 line : 22605280 cells/sec OC48 line : 5651320 cells/sec OC12 line : 1412830 cells/sec OC3 line : 353207 cells/sec T3 line : 96000 cells/sec E3 line : 80000 cells/sec." ::= { caviEntry 4 } caviMaxRate OBJECT-TYPE SYNTAX Gauge -- Units -- cells-per-second ACCESS read-write STATUS mandatory DESCRIPTION "ATM virtual interface's maximum cell rate. If bandwidth is available, the interface will be allocated bandwidth upto this value. The total bandwidth of connections configured over this interface cannot exceed this value. The value of this object can't exceed the 'ifSpeed' or 'ifHighSpeed' value in ifTable for the associated 'caviPhyIfIndex'. ATM cell bandwidths for various physical lines are: OC192 line : 22605280 cells/sec OC48 line : 5651320 cells/sec OC12 line : 1412830 cells/sec OC3 line : 353207 cells/sec T3 line : 96000 cells/sec E3 line : 80000 cells/sec." ::= { caviEntry 5 } caviFileId OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The ID of the file that holds module specific configuration parameters for this ATM virtual interface." DEFVAL { 0 } ::= { caviEntry 6 } caviIfType OBJECT-TYPE SYNTAX INTEGER { uni(1), nni(2), vnni(3), vuni(4), evuni(5), evnni(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object reflects the type of ATM virtual interface that can be configured within a physical interface. The supported types of virtual interfaces and their description is shown below: uni : Only one virtual interface of uni type can be configured within a physical interface. The ATM cells used in this interface would use a 8 bit VPI and a 4 bit GFC. nni : Only one virtual interface of nni type can be configured within a physical interface.The ATM cells used in this interface would use a 12 bit VPI. vnni: Multiple virtual interfaces of vnni type can be configured within a physical interface. However, all cells sent on this interface belong to a single VPI (defined by caviVpiNum) and the cells use a 12 bit VPI. vuni: Multiple virtual interfaces of vuni type can be configured within a physical interface. However, all cells sent on this interface belong to a single VPI (defined by caviVpiNum) and the cells use a 8 bit VPI and a 4 bit GFC. evuni: Multiple virtual interfaces of evuni type can be configured within a physical interface. However, all cells sent on this interface belong to a range of VPI (defined by caviMinVpiNum & caviMaxVpiNum) and the cells use a 8 bit VPI and a 4 bit GFC. evnni: Multiple virtual interfaces of evuni type can be configured within a physical interface. However, all cells sent on this interface belong to a range of VPI (defined by caviMinVpiNum & caviMaxVpiNum) and the cells use a 12 bit VPI." DEFVAL { uni } ::= { caviEntry 7 } caviVpiNum OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used when configuring ATM virtual interfaces of caviIftype vuni(4) or vnni (3). A non-zero value is required for vuni / vnni operation. The value set in this object for other type of caviIfTypes would be ignored by the agent. The GET operation on this object would return 0 for caviIfTypes other than vuni/vnni." DEFVAL { 0 } ::= { caviEntry 8 } caviRowStatus OBJECT-TYPE SYNTAX RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This object allows create and delete operations on caviTable entries. An entry is created in the table by setting this object to createAndGo(4). An entry is deleted from the table by setting this object to destroy(6). An entry in this table may be modified after creation." ::= { caviEntry 9 } caviMinVpiNum OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This object is mandatory while configuring this ATM virtual interface as caviIfType evuni(5) or evnni(6). The range of VPI accepted by the agent depends on caviIfType. The evuni accepts a range from 0 to 255, while the evnni accepts a range from 0 to 4095. The object specifies the minimum VPI for a evuni/evnni interface. The agent ignores a SET on this object for any interface other than a evuni/evnni. A GET operation for interfaces other than a evuni/evnni would always yield 0" DEFVAL { 0 } ::= { caviEntry 10 } caviMaxVpiNum OBJECT-TYPE SYNTAX AtmVpIdentifier -- Rsyntax INTEGER(0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This object is mandatory while configuring this ATM virtual interface as caviIfType evuni(5) or evnni(6). The range of VPI accepted by the agent depends on caviIfType. The evuni accepts a range from 0 to 255, while the evnni accepts a range from 0 to 4095. The agent rejects a SET on this object for any interface other than a evuni/evnni. A GET operation for interfaces other than a evuni/evnni would always yield 0" ::= { caviEntry 11 } caviStatEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF CaviStatEgressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reflects real time statistics associated with each of the ATM virtual interfaces on the egress side. Ingress direction means coming from network into switch, Egress direction means going from switch into the network." ::= { caviStatistics 1 } caviStatEgressEntry OBJECT-TYPE SYNTAX CaviStatEgressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for egress ATM virtual interface statistics. In all the following descriptions, CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1. Statistics are being collected before and after the traffic management and policing device." INDEX { ifIndex } ::= { caviStatEgressTable 1 } CaviStatEgressEntry ::= SEQUENCE { caviEgrRcvClp0Cells Counter, caviEgrRcvClp1Cells Counter, caviEgrClp0DiscCells Counter, caviEgrClp1DiscCells Counter, caviEgrXmtClp0Cells Counter, caviEgrXmtClp1Cells Counter, caviEgrRcvOAMCells Counter, caviEgrRMCells Counter, caviEgrXmtEFCICells Counter, caviEgrRcvEFCICells Counter, caviEgrXmtOAMCells Counter, caviHEgrXmtClp0Cells Counter, caviHEgrXmtClp1Cells Counter, caviHighEgrRcvClp0Cells Counter, caviHighEgrRcvClp1Cells Counter, caviHighEgrClp0DiscCells Counter, caviHighEgrClp1DiscCells Counter, caviHighEgrXmtClp0Cells Counter, caviHighEgrXmtClp1Cells Counter, caviHEgrRcvClp0Cells Counter, caviHEgrRcvClp1Cells Counter, caviHEgrClp0DiscCells Counter, caviHEgrClp1DiscCells Counter } caviEgrRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 1 } caviEgrRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 2 } caviEgrClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells discarded due to policing." ::= { caviStatEgressEntry 3 } caviEgrClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells discarded due to policing." ::= { caviStatEgressEntry 4 } caviEgrXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells transmitted to the network after traffic management and policing." ::= { caviStatEgressEntry 5 } caviEgrXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells transmitted to the network after traffic management and policing." ::= { caviStatEgressEntry 6 } caviEgrRcvOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells received from the switch at the traffic management and policing device." ::= { caviStatEgressEntry 7 } caviEgrRMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RM cells transmitted to the network from the switch." ::= { caviStatEgressEntry 8 } caviEgrXmtEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells transmitted to the network after traffic management and policing." ::= { caviStatEgressEntry 9 } caviEgrRcvEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells received from the switch at traffic management and policing device." ::= { caviStatEgressEntry 10 } caviEgrXmtOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM loopback cells transmitted to network after traffic management and policing." ::= { caviStatEgressEntry 11 } caviHEgrXmtClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of caviEgrXmtClp0Cells." ::= { caviStatEgressEntry 12 } caviHEgrXmtClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of caviEgrXmtClp1Cells." ::= { caviStatEgressEntry 13 } caviHighEgrRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-0 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 14 } caviHighEgrRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-1 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 15 } caviHighEgrClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-0 cells discarded due to policing." ::= { caviStatEgressEntry 16 } caviHighEgrClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-1 cells discarded due to policing." ::= { caviStatEgressEntry 17 } caviHighEgrXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-0 cells transmitted to the network after traffic management and policing." ::= { caviStatEgressEntry 18 } caviHighEgrXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Upper 32 bit of the number of CLP-1 cells transmitted to the network after traffic management and policing." ::= { caviStatEgressEntry 19 } caviHEgrRcvClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 20 } caviHEgrRcvClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells received from switch at the traffic management and policing device." ::= { caviStatEgressEntry 21 } caviHEgrClp0DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells discarded due to policing." ::= { caviStatEgressEntry 22 } caviHEgrClp1DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells discarded due to policing." ::= { caviStatEgressEntry 23 } caviEgressIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF CaviEgressIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reflects interval statistics associated with each of the ATM virtual interfaces in egress direction." ::= { caviStatistics 2 } caviEgressIntervalEntry OBJECT-TYPE SYNTAX CaviEgressIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for egress ATM virtual interface interval statistics. In addition to the current 15-minute interval bucket, the previous 24 hours worth of 15-minute interval buckets are collected for each ATM virtual interface. Statistics are being collected before and after the traffic management and policing device, in egress direction." INDEX { ifIndex, caviEgressIntervalNumber } ::= { caviEgressIntervalTable 1 } CaviEgressIntervalEntry ::= SEQUENCE { caviEgressIntervalNumber Gauge, caviIntEgrRcvClp0Cells Counter, caviIntEgrRcvClp1Cells Counter, caviIntEgrClp0DiscCells Counter, caviIntEgrClp1DiscCells Counter, caviIntEgrXmtClp0Cells Counter, caviIntEgrXmtClp1Cells Counter, caviIntEgrRcvOAMCells Counter, caviIntEgrRMCells Counter, caviIntEgrXmtEFCICells Counter, caviIntEgrRcvEFCICells Counter, caviIntEgrXmtOAMCells Counter, caviHighIntEgrRcvClp0Cells Counter, caviHighIntEgrRcvClp1Cells Counter, caviHighIntEgrClp0DiscCells Counter, caviHighIntEgrClp1DiscCells Counter, caviHighIntEgrXmtClp0Cells Counter, caviHighIntEgrXmtClp1Cells Counter, caviHIntEgrRcvClp0Cells Counter, caviHIntEgrRcvClp1Cells Counter, caviHIntEgrClp0DiscCells Counter, caviHIntEgrClp1DiscCells Counter, caviHIntEgrXmtClp0Cells Counter, caviHIntEgrXmtClp1Cells Counter } caviEgressIntervalNumber OBJECT-TYPE SYNTAX Gauge(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "A number used to uniquely identify a ATM virtual interface's interval statistics. 0 is used to identify the current 15-minute interval. 1-96 identify the previous 24 hours of 15-minute interval buckets." ::= { caviEgressIntervalEntry 1 } caviIntEgrRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 2 } caviIntEgrRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 3 } caviIntEgrClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 4 } caviIntEgrClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 5 } caviIntEgrXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 6 } caviIntEgrXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 7 } caviIntEgrRcvOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells received from the switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 8 } caviIntEgrRMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RM cells transmitted to the network from the switch during a 15 minute interval." ::= { caviEgressIntervalEntry 9 } caviIntEgrXmtEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 10 } caviIntEgrRcvEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells received from the switch at traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 11 } caviIntEgrXmtOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM loopback cells transmitted to network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 12 } caviHighIntEgrRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 13 } caviHighIntEgrRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 14 } caviHighIntEgrClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 15 } caviHighIntEgrClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 16 } caviHighIntEgrXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 17 } caviHighIntEgrXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 18 } caviHIntEgrRcvClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 19 } caviHIntEgrRcvClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval." ::= { caviEgressIntervalEntry 20 } caviHIntEgrClp0DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 21 } caviHIntEgrClp1DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells discarded due to policing during a 15 minute interval." ::= { caviEgressIntervalEntry 22 } caviHIntEgrXmtClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 23 } caviHIntEgrXmtClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval." ::= { caviEgressIntervalEntry 24 } caviStatIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF CaviStatIngressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reflects real time statistics associated with each of the ATM virtual interfaces on the ingress side." ::= { caviStatistics 3 } caviStatIngressEntry OBJECT-TYPE SYNTAX CaviStatIngressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for egress ATM virtual interface statistics. In all the following descriptions, CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1. Statistics are being collected before and after the traffic management and policing device." INDEX { ifIndex } ::= { caviStatIngressTable 1 } CaviStatIngressEntry ::= SEQUENCE { caviIngRcvClp0Cells Counter, caviIngRcvClp1Cells Counter, caviIngClp0DiscCells Counter, caviIngClp1DiscCells Counter, caviIngXmtClp0Cells Counter, caviIngXmtClp1Cells Counter, caviIngRcvOAMCells Counter, caviIngRMCells Counter, caviIngXmtEFCICells Counter, caviIngRcvEFCICells Counter, caviIngXmtOAMCells Counter, caviHIngRcvClp0Cells Counter, caviHIngRcvClp1Cells Counter, caviHighIngRcvClp0Cells Counter, caviHighIngRcvClp1Cells Counter, caviHighIngClp0DiscCells Counter, caviHighIngClp1DiscCells Counter, caviHighIngXmtClp0Cells Counter, caviHighIngXmtClp1Cells Counter, caviHIngClp0DiscCells Counter, caviHIngClp1DiscCells Counter, caviHIngXmtClp0Cells Counter, caviHIngXmtClp1Cells Counter } caviIngRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells received from network at the traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 1 } caviIngRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells received from network at the traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 2 } caviIngClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 3 } caviIngClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 4 } caviIngXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 5 } caviIngXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 6 } caviIngRcvOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells received from the network at the traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 7 } caviIngRMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RM cells transmitted to the switch from the network in ingress direction." ::= { caviStatIngressEntry 8 } caviIngXmtEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 9 } caviIngRcvEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells received from the network at traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 10 } caviIngXmtOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 11 } caviHIngRcvClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of caviIngRcvClp0Cells in ingress direction." ::= { caviStatIngressEntry 12 } caviHIngRcvClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of caviIngRcvClp1Cells in ingress direction." ::= { caviStatIngressEntry 13 } caviHighIngRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 14 } caviHighIngRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction." ::= { caviStatIngressEntry 15 } caviHighIngClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 16 } caviHighIngClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 17 } caviHighIngXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 18 } caviHighIngXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 19 } caviHIngClp0DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 20 } caviHIngClp1DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells discarded due to policing in ingress direction." ::= { caviStatIngressEntry 21 } caviHIngXmtClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 22 } caviHIngXmtClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction." ::= { caviStatIngressEntry 23 } caviIngressIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF CaviIngressIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table reflects interval statistics associated with each of the ATM virtual interfaces on the ingress side." ::= { caviStatistics 4 } caviIngressIntervalEntry OBJECT-TYPE SYNTAX CaviIngressIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for ingress ATM virtual interface interval statistics. In addition to the current 15-minute interval bucket, the previous 24 hours worth of 15-minute interval buckets are collected for each ATM virtual interface. Statistics are being collected before and after the traffic management and policing device, in ingress direction." INDEX { ifIndex, caviIngressIntervalNumber } ::= { caviIngressIntervalTable 1 } CaviIngressIntervalEntry ::= SEQUENCE { caviIngressIntervalNumber Gauge, caviIntIngRcvClp0Cells Counter, caviIntIngRcvClp1Cells Counter, caviIntIngClp0DiscCells Counter, caviIntIngClp1DiscCells Counter, caviIntIngXmtClp0Cells Counter, caviIntIngXmtClp1Cells Counter, caviIntIngRcvOAMCells Counter, caviIntIngRMCells Counter, caviIntIngXmtEFCICells Counter, caviIntIngRcvEFCICells Counter, caviIntIngXmtOAMCells Counter, caviHighIntIngRcvClp0Cells Counter, caviHighIntIngRcvClp1Cells Counter, caviHighIntIngClp0DiscCells Counter, caviHighIntIngClp1DiscCells Counter, caviHighIntIngXmtClp0Cells Counter, caviHighIntIngXmtClp1Cells Counter, caviHIntIngRcvClp0Cells Counter, caviHIntIngRcvClp1Cells Counter, caviHIntIngClp0DiscCells Counter, caviHIntIngClp1DiscCells Counter, caviHIntIngXmtClp0Cells Counter, caviHIntIngXmtClp1Cells Counter } caviIngressIntervalNumber OBJECT-TYPE SYNTAX Gauge(0..96) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number used to uniquely identify a ATM virtual interface's interval statistics. 0 is used to identify the current 15-minute interval, which is currently being updated. 1-96 identify the previous 24 hours of 15-minute interval buckets, where interval 1 representing the most recent 15-minute interval and interval 96 representing the least recent 15-minute interval" ::= { caviIngressIntervalEntry 1 } caviIntIngRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 2 } caviIntIngRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 3 } caviIntIngClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 4 } caviIntIngClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval ." ::= { caviIngressIntervalEntry 5 } caviIntIngXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 6 } caviIntIngXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 7 } caviIntIngRcvOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells received from the network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 8 } caviIntIngRMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RM cells transmitted to the switch from the network in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 9 } caviIntIngXmtEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 10 } caviIntIngRcvEFCICells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EFCI cells received from the network at traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 11 } caviIntIngXmtOAMCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 12 } caviHighIntIngRcvClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 13 } caviHighIntIngRcvClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 14 } caviHighIntIngClp0DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 15 } caviHighIntIngClp1DiscCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 16 } caviHighIntIngXmtClp0Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 17 } caviHighIntIngXmtClp1Cells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The upper 32 bits of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 18 } caviHIntIngRcvClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 19 } caviHIntIngRcvClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64-bit version of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 20 } caviHIntIngClp0DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 21 } caviHIntIngClp1DiscCells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 22 } caviHIntIngXmtClp0Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 23 } caviHIntIngXmtClp1Cells OBJECT-TYPE SYNTAX --?? syntax is not convertable to SMIv1 Counter ACCESS read-only STATUS mandatory DESCRIPTION "The 64 bit version of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval." ::= { caviIngressIntervalEntry 24 } caviMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 1 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These are objects related to ciscoAtmVirtualIf configuration group. -- objects -- caviPhyIfIndex, caviViIfIndex, caviMinRate, caviMaxRate, -- caviFileId, caviIfType, caviVpiNum, caviRowStatus caviEgressStatMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 2 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These are objects related to the ATM virtual interface statistics -- group caviStatistics. -- objects -- caviEgrRcvClp0Cells, caviEgrRcvClp1Cells, -- caviEgrClp0DiscCells, caviEgrClp1DiscCells, -- caviEgrXmtClp0Cells, caviEgrXmtClp1Cells, caviEgrRcvOAMCells, -- caviEgrRMCells, caviEgrXmtEFCICells, caviEgrRcvEFCICells, -- caviEgrXmtOAMCells caviEgressHighSpeedStatMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 3 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These statistics apply to ingress ATM virtual interfaces with speed of -- OC12 or higher. -- objects -- caviHEgrXmtClp0Cells, caviHEgrXmtClp1Cells caviEgressIntervalMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 4 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These are objects related to the ATM virtual interface -- interval statistics group. -- objects -- caviEgressIntervalNumber, caviIntEgrRcvClp0Cells, -- caviIntEgrRcvClp1Cells, caviIntEgrClp0DiscCells, -- caviIntEgrClp1DiscCells, caviIntEgrXmtClp0Cells, -- caviIntEgrXmtClp1Cells, caviIntEgrRcvOAMCells, -- caviIntEgrRMCells, caviIntEgrXmtEFCICells, -- caviIntEgrRcvEFCICells, caviIntEgrXmtOAMCells caviIngressStatMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 5 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These are objects related to the ingress ATM virtual -- interface statistics. -- objects -- caviIngRcvClp0Cells, caviIngRcvClp1Cells, -- caviIngClp0DiscCells, caviIngClp1DiscCells, -- caviIngXmtClp0Cells, caviIngXmtClp1Cells, caviIngRcvOAMCells, -- caviIngRMCells, caviIngXmtEFCICells, caviIngRcvEFCICells, -- caviIngXmtOAMCells caviIngressHighSpeedStatMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 6 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These statistics apply to ingress ATM virtual interfaces with speed of -- OC12 or higher. -- objects -- caviHIngRcvClp0Cells, caviHIngRcvClp1Cells caviMIBGroupRev1 OBJECT IDENTIFIER ::= { caviMIBGroups 7 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- Definition of additional objects caviMinVpiNum and caviMaxVpiNum, -- which are required to support the evuni and evnni functionality. -- objects -- caviPhyIfIndex, caviViIfIndex, caviMinRate, caviMaxRate, -- caviFileId, caviIfType, caviVpiNum, caviRowStatus, -- caviMinVpiNum, caviMaxVpiNum caviEgressStatMIBGroup1 OBJECT IDENTIFIER ::= { caviMIBGroups 8 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These are objects related to the ATM virtual interface -- statistics group caviStatistics. -- objects -- caviEgrRcvClp0Cells, caviEgrRcvClp1Cells, -- caviEgrClp0DiscCells, caviEgrClp1DiscCells, -- caviEgrXmtClp0Cells, caviEgrXmtClp1Cells, caviEgrRcvOAMCells, -- caviEgrRMCells, caviEgrXmtEFCICells, caviEgrRcvEFCICells, -- caviEgrXmtOAMCells, caviHighEgrRcvClp0Cells, -- caviHighEgrRcvClp1Cells, caviHighEgrClp0DiscCells, -- caviHighEgrClp1DiscCells, caviHighEgrXmtClp0Cells, -- caviHighEgrXmtClp1Cells caviEgressHighSpeedStatMIBGroup1 OBJECT IDENTIFIER ::= { caviMIBGroups 9 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These statistics apply to ingress ATM virtual interfaces -- with speed of OC12 or higher. -- objects -- caviHEgrXmtClp0Cells, caviHEgrXmtClp1Cells, -- caviHEgrRcvClp0Cells, caviHEgrRcvClp1Cells, -- caviHEgrClp0DiscCells, caviHEgrClp1DiscCells, -- caviHIntEgrRcvClp0Cells, caviHIntEgrRcvClp1Cells, -- caviHIntEgrClp0DiscCells, caviHIntEgrClp1DiscCells, -- caviHIntEgrXmtClp0Cells, caviHIntEgrXmtClp1Cells caviEgressIntervalMIBGroup1 OBJECT IDENTIFIER ::= { caviMIBGroups 10 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These are objects related to the ATM virtual interface -- interval statistics group. -- objects -- caviEgressIntervalNumber, caviIntEgrRcvClp0Cells, -- caviIntEgrRcvClp1Cells, caviIntEgrClp0DiscCells, -- caviIntEgrClp1DiscCells, caviIntEgrXmtClp0Cells, -- caviIntEgrXmtClp1Cells, caviIntEgrRcvOAMCells, -- caviIntEgrRMCells, caviIntEgrXmtEFCICells, -- caviIntEgrRcvEFCICells, caviIntEgrXmtOAMCells, -- caviHighIntEgrRcvClp0Cells, caviHighIntEgrRcvClp1Cells, -- caviHighIntEgrClp0DiscCells, caviHighIntEgrClp1DiscCells, -- caviHighIntEgrXmtClp0Cells, caviHighIntEgrXmtClp1Cells caviIngressStatMIBGroup1 OBJECT IDENTIFIER ::= { caviMIBGroups 11 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These are objects related to the ingress ATM virtual -- interface statistics. -- objects -- caviIngRcvClp0Cells, caviIngRcvClp1Cells, -- caviIngClp0DiscCells, caviIngClp1DiscCells, -- caviIngXmtClp0Cells, caviIngXmtClp1Cells, caviIngRcvOAMCells, -- caviIngRMCells, caviIngXmtEFCICells, caviIngRcvEFCICells, -- caviIngXmtOAMCells, caviHighIngRcvClp0Cells, -- caviHighIngRcvClp1Cells, caviHighIngClp0DiscCells, -- caviHighIngClp1DiscCells, caviHighIngXmtClp0Cells, -- caviHighIngXmtClp1Cells caviIngHighSpeedStatMIBGroup1 OBJECT IDENTIFIER ::= { caviMIBGroups 12 } -- OBJECT-GROUP -- Status -- deprecated -- Descr -- These statistics apply to ingress ATM virtual interfaces -- with speed of OC12 or higher. -- objects -- caviHIngRcvClp0Cells, caviHIngRcvClp1Cells, -- caviHIngClp0DiscCells, caviHIngClp1DiscCells, -- caviHIngXmtClp0Cells, caviHIngXmtClp1Cells caviIngressIntervalStatMIBGroup OBJECT IDENTIFIER ::= { caviMIBGroups 13 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These are objects related to the ingress ATM virtual -- interface statistics. -- objects -- caviIntIngRcvClp0Cells, caviIntIngRcvClp1Cells, -- caviIntIngClp0DiscCells, caviIntIngClp1DiscCells, -- caviIntIngXmtClp0Cells, caviIntIngXmtClp1Cells, -- caviIntIngRcvOAMCells, caviIntIngRMCells, -- caviIntIngXmtEFCICells, caviIntIngRcvEFCICells, -- caviIntIngXmtOAMCells caviIngHighSpeedStatMIBGroup2 OBJECT IDENTIFIER ::= { caviMIBGroups 14 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- These statistics apply to ingress ATM virtual interfaces -- with speed of OC12 or higher. -- objects -- caviHighIntIngRcvClp0Cells, caviHighIntIngRcvClp1Cells, -- caviHighIntIngClp0DiscCells, caviHighIntIngClp1DiscCells, -- caviHighIntIngXmtClp0Cells, caviHighIntIngXmtClp1Cells, -- caviHIngRcvClp0Cells, caviHIngRcvClp1Cells, -- caviHIngClp0DiscCells, caviHIngClp1DiscCells, -- caviHIngXmtClp0Cells, caviHIngXmtClp1Cells, -- caviHIntIngRcvClp0Cells, caviHIntIngRcvClp1Cells, -- caviHIntIngClp0DiscCells, caviHIntIngClp1DiscCells, -- caviHIntIngXmtClp0Cells, caviHIntIngXmtClp1Cells caviMIBCompliance OBJECT IDENTIFIER ::= { caviMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- The Compliance statement for cisco AtmVirtualIf management group. -- Module -- >>current<< -- MandGroup -- caviMIBGroup -- MandGroup -- caviEgressStatMIBGroup -- OptGroup -- caviEgressHighSpeedStatMIBGroup -- OptGroup -- caviEgressIntervalMIBGroup -- OptGroup -- caviIngressStatMIBGroup -- OptGroup -- caviIngressHighSpeedStatMIBGroup caviMIBComplianceRev1 OBJECT IDENTIFIER ::= { caviMIBCompliances 2 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- Compliance statement for cisco AtmVirtualIf management group -- with support for virtual user and network ports -- Module -- >>current<< -- MandGroup -- caviMIBGroupRev1 -- MandGroup -- caviEgressStatMIBGroup -- OptGroup -- caviEgressHighSpeedStatMIBGroup -- OptGroup -- caviEgressIntervalMIBGroup -- OptGroup -- caviIngressStatMIBGroup -- OptGroup -- caviIngressHighSpeedStatMIBGroup caviMIBComplianceRev2 OBJECT IDENTIFIER ::= { caviMIBCompliances 3 } -- MODULE-COMPLIANCE -- Status -- deprecated -- Descr -- Compliance statement for cisco AtmVirtualIf management -- group with support for virtual user and network ports -- Module -- >>current<< -- MandGroup -- caviMIBGroupRev1 -- MandGroup -- caviEgressStatMIBGroup1 -- OptGroup -- caviEgressHighSpeedStatMIBGroup1 -- OptGroup -- caviEgressIntervalMIBGroup1 -- OptGroup -- caviIngressStatMIBGroup1 -- OptGroup -- caviIngHighSpeedStatMIBGroup1 caviMIBComplianceRev3 OBJECT IDENTIFIER ::= { caviMIBCompliances 4 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- Compliance statement for cisco AtmVirtualIf management -- group with support for virtual user and network ports -- Module -- >>current<< -- MandGroup -- caviMIBGroupRev1 -- MandGroup -- caviEgressStatMIBGroup1 -- OptGroup -- caviEgressHighSpeedStatMIBGroup1 -- OptGroup -- caviEgressIntervalMIBGroup1 -- OptGroup -- caviIngressStatMIBGroup1 -- OptGroup -- caviIngHighSpeedStatMIBGroup2 -- OptGroup -- caviIngressIntervalStatMIBGroup END