-- Revision 1.8 Draft --------------------------- -- 2003/1/21 11:21¤W¤È -- Modified Common traps and management -- ---------------------------------------------- -- Remove agentConsoleModeManager , agentSlipModeManager -- Add Common traps management -- Revision 1.7 -- Copyright 2000 D-Link Inc. -- All rights reserved. DLINK-AGENT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString FROM RFC1213-MIB --AgentNotifyLevel FROM DLINK-ID-REC-MIB dlink-common-mgmt FROM DLINK-ID-REC-MIB; agentGeneralMgmt MODULE-IDENTITY LAST-UPDATED "0007150000Z" ORGANIZATION "D-Link, Inc." CONTACT-INFO " D-Link Customer Service Postal: No. 20,Park Ave, II, Science-based Industrial Park, Hsinchu, taiwan, R.O.C. Tel: 886-3-577-9966 E-mail: " DESCRIPTION "The Structure of Common Management Information for the D-Link enterprise." ::= { dlink-common-mgmt 1 } -- **************** -- agentBasicInfo * -- **************** agentBasicInfo OBJECT IDENTIFIER ::= { agentGeneralMgmt 1 } agentMgmtProtocolCapability OBJECT-TYPE SYNTAX INTEGER { other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The network management protocol(s) supported by this agent." ::= { agentBasicInfo 1 } -- ************************* -- agentMibcapabilityTable * -- ************************* agentMibCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentMibCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MIB capability entries supported by this agent." ::= { agentBasicInfo 2 } agentMibCapabilityEntry OBJECT-TYPE SYNTAX AgentMibCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MIB capability entry contains objects describing a particular MIB supported by this agent." INDEX { agentMibCapabilityIndex } ::= { agentMibCapabilityTable 1 } AgentMibCapabilityEntry ::= SEQUENCE { agentMibCapabilityIndex Integer32, agentMibCapabilityDescr DisplayString, agentMibCapabilityVersion Integer32, agentMibCapabilityType INTEGER } agentMibCapabilityIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A list of agentMibCapabilityDescr entries." ::= { agentMibCapabilityEntry 1 } agentMibCapabilityDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the MIB supported by the agent." ::= { agentMibCapabilityEntry 2 } agentMibCapabilityVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the MIB specified in this entry." ::= { agentMibCapabilityEntry 3 } agentMibCapabilityType OBJECT-TYPE SYNTAX INTEGER { other(1), standard(2), proprietary(3), experiment(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the MIB specified in this entry." ::= { agentMibCapabilityEntry 4 } agentStatusConsoleInUse OBJECT-TYPE SYNTAX INTEGER { other(1), in-use(2), not-in-use(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether console is currently in-use." ::= { agentBasicInfo 3 } agentStatusSaveCfg OBJECT-TYPE SYNTAX INTEGER { other(1), proceeding(2), completed(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is being currently saved into the NV-RAM. completed(3) ¡V all of the device configuration parameters have been saved into NV-RAM. failed(4) - The process to save device configuration is failed." ::= { agentBasicInfo 4 } agentStatusFileTransfer OBJECT-TYPE SYNTAX INTEGER { other(1) , in-process(2), invalid-file(3), violation(4), file-not-found(5), disk-full(6), complete(7), time-out(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "status of firmware download control. If the value is 'other', means never firmware updated since device started up." ::= { agentBasicInfo 5 } -- ****************** -- agentBasicConfig * -- ****************** agentBasicConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 2 } agentBscSwFileTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentBscSwFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MIB Basic Config entries supported file Update by this agent." ::= { agentBasicConfig 1 } agentBscSwFileEntry OBJECT-TYPE SYNTAX AgentBscSwFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A basic config entry contains objects describing a particular MIB supported by this agent." INDEX { agentBscSwFileIndex } ::= { agentBscSwFileTable 1 } AgentBscSwFileEntry ::= SEQUENCE { agentBscSwFileIndex Integer32, agentBscSwFileDscr DisplayString, agentBscSwFileAddr IpAddress, agentBscSwFileTransferType INTEGER, agentBscSwFile DisplayString, agentBscSwFileLocateId INTEGER, agentBscSwFileLoadType INTEGER, agentBscSwFileUnitId INTEGER, agentBscSwFileCtrl INTEGER } agentBscSwFileIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The table index for the file entry" ::= { agentBscSwFileEntry 1 } agentBscSwFileDscr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 2 } agentBscSwFileAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address where the File to be downloaded is located, or the IP address where the file will be uploaded to." ::= { agentBscSwFileEntry 3 } agentBscSwFileTransferType OBJECT-TYPE SYNTAX INTEGER { other(1), network-load(2), out-of-band-load(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported channel will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 4 } agentBscSwFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the file to be downloaded from the TFTP server, or to be uploaded to." ::= { agentBscSwFileEntry 5 } agentBscSwFileLocateId OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 6 } agentBscSwFileLoadType OBJECT-TYPE SYNTAX INTEGER { other(1), upload(2), download(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 7 } agentBscSwFileUnitId OBJECT-TYPE SYNTAX INTEGER (0..13) MAX-ACCESS read-write STATUS current DESCRIPTION "The id of the member unit. to the slave ,the value is 1 to 13. and to the master ,the value is 15.just for dgs3x12 " ::= { agentBscSwFileEntry 8 } agentBscSwFileCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), inactive(2), start(3), delete(4), create-and-go(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the user to download runtime software. The setting will take effect when the system is restart. See Note(1) below Note: For system which does not support change of this object to some value, setting object to these values cause the system to return bad-value error message. " ::= { agentBscSwFileEntry 9 } agentFileTransfer OBJECT-TYPE SYNTAX INTEGER { other(1), start(2), start-and-reset(3), noaction(4) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset as follow. If start-and-reset(3), then the reset will active after download or upload. No action if(4). Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status." ::= { agentBasicConfig 2 } agentSystemReset OBJECT-TYPE SYNTAX INTEGER { other(1), cold-start(2), warm-start(3), no-reset(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read." ::= { agentBasicConfig 3 } agentRs232PortConfig OBJECT-TYPE SYNTAX INTEGER { other(1), console(2), out-of-band(3), notAvail(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the RS-232C mode while device restart." ::= { agentBasicConfig 4 } agentOutOfBandBaudRateConfig OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-2400 (2), baudRate-9600 (3), baudRate-19200(4), baudRate-38400(5), baudRate-115200(6) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. " ::= { agentBasicConfig 5 } agentSaveCfg OBJECT-TYPE SYNTAX INTEGER { other(1), idle(2), set(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "As the object is set to 'set(3)', the current device configuration will be saved into to NV-RAM." ::= { agentBasicConfig 6 } agentConsolePortBaudRateConfig OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-9600 (2), baudRate-19200(3), baudRate-38400(4), baudRate-115200(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify console port baud rate. It will take effect after the set action success. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. " ::= { agentBasicConfig 7 } -- *********************** -- agentIpProtocolConfig * -- *********************** agentIpProtoConfig OBJECT IDENTIFIER ::= { agentGeneralMgmt 3 } agentIpNumOfIf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP interfaces supported by this agent." ::= { agentIpProtoConfig 1 } agentIpTftpServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The IP Address of TFTP Server." ::= { agentIpProtoConfig 2 } agentIpGetIpFrom OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), bootp(3), dhcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up." ::= { agentIpProtoConfig 3 } -- End of agentIpIfTable --------- END