-- =================================================================
-- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved.
--
-- Description: CATV transceiver MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 created by xujun.
--     Initial version of the MIB
-- =================================================================
FS-CATV-TRANSCEIVER-MIB DEFINITIONS ::= BEGIN

IMPORTS
        fsCommon
    FROM FS-OID-MIB
        Integer32, OBJECT-TYPE, MODULE-IDENTITY,
        NOTIFICATION-TYPE
    FROM SNMPv2-SMI;

fsCATVTransceiver MODULE-IDENTITY
    LAST-UPDATED "200807251008Z"
    ORGANIZATION
        "Fiberstore Co.,Limited"
    CONTACT-INFO
        ""
    DESCRIPTION
        "
        The objects in this MIB module are used to manage and
        display common configuration for CATV(Community Antenna
        Television) transceiver module.
        "
    ::= { fsCommon 94 }

--
-- fsCATVTransceiverStatus
--

fsCATVTransStatus OBJECT IDENTIFIER ::= { fsCATVTransceiver 1 }

fsCATVTransStatusScalarObjects OBJECT IDENTIFIER ::= { fsCATVTransStatus 1 }

fsCATVTransState OBJECT-TYPE
    SYNTAX     INTEGER
    {
        on         (1),
        off        (2)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "
         The state of CATV transceiver.
         "
    ::= { fsCATVTransStatusScalarObjects 1 }

fsCATVTransInputPwr OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "dbm"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "
         The input power of CATV transceiver.
         If transceiver is not on site,
         the value should be zero.
         "
    ::= { fsCATVTransStatusScalarObjects 2 }

fsCATVTransOutputLevel OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "dbuv"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "
         The output level of CATV transceiver.
         If transceiver is not on site,
         the value should be zero.
         "
    ::= { fsCATVTransStatusScalarObjects 3 }

fsCATVTransTemperature OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "centigrade"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "
         The temperature of CATV transceiver.
         If transceiver is not on site,
         the value should be zero.
         "
    ::= { fsCATVTransStatusScalarObjects 4 }


--
-- fsCATVTransceiverMan
--

fsCATVTransceiverMan OBJECT IDENTIFIER ::= { fsCATVTransceiver 2 }

fsCATVTransCtrlScalarObjects OBJECT IDENTIFIER ::= { fsCATVTransceiverMan 1 }

fsCATVTransInputPwrLowerThr OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "dbm"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "
        A threshold for the CATV transceiver's input power.
        When the input power of CATV transceiver is lower
        than threshold, a trap should be generated.
        "
    ::= { fsCATVTransCtrlScalarObjects 1 }

fsCATVTransOutputLvlLowerThr OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "dbuv"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "
        A threshold for the CATV transceiver's output level.
        When the output level of CATV transceiver is lower
        than threshold, a trap should be generated.
        "
    ::= { fsCATVTransCtrlScalarObjects 2 }

fsCATVTransTempratureUpperThr OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "¡æ"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "
        A threshold for the CATV transceiver's temperature.
        When the temperature of CATV transceiver is higher
        than threshold, a trap should be generated.
        "
    ::= { fsCATVTransCtrlScalarObjects 3 }


--
-- fsCATVTransceiver NOTIFICATION
--

fsCATVTansTrap OBJECT IDENTIFIER ::= { fsCATVTransceiver 3 }

fsCATVTransTrapPrefix OBJECT IDENTIFIER ::= {fsCATVTansTrap 0}

fsCATVTransInputPwrTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransInputPwr
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransInputPwrTrap notification is sent when the
        input power of CATV transceiver is lower than the threshold.
        "
    ::= { fsCATVTransTrapPrefix 1 }

fsCATVTransInputPwrReTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransInputPwr
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransInputPwrReTrap notification is sent when the
        input power of CATV transceiver recovered from the last trap.
        "
    ::= { fsCATVTransTrapPrefix 2 }

fsCATVTransOutputLvlTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransOutputLevel
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransOutputLvlTrap notification is sent when the
        output level of CATV transceiver is lower than the threshold.
        "
    ::= { fsCATVTransTrapPrefix 3 }

fsCATVTransOutputLvlReTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransOutputLevel
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransOutputLvlReTrap notification is sent when the
        output level of CATV transceiver recovered from the last trap.
        "
    ::= { fsCATVTransTrapPrefix 4 }

fsCATVTransTemperatureTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransTemperature
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransTemperatureTrap notification is sent when the
        temperature of CATV transceiver is higher than the threshold.
        "
    ::= { fsCATVTransTrapPrefix 5 }

fsCATVTransTemperatureReTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsCATVTransTemperature
        }
    STATUS current
    DESCRIPTION
        "
        A fsCATVTransTemperatureReTrap notification is sent when the
        temperature of CATV transceiver recovered from the last trap.
        "
    ::= { fsCATVTransTrapPrefix 6 }
END