-- *****************************************************************
-- FS-MPLS-VPN-MGMT-MIB.mib:  FS MPLS VPN MGMT MIB file
--
-- Mar 2021
--
-- Copyright (c) 2013 by FS.COM Inc.
-- All rights reserved.
-- 
-- *****************************************************************
--

FS-MPLS-VPN-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        IpAddress,
        Unsigned32,
        Gauge32,
        Counter32
                FROM SNMPv2-SMI
        DisplayString,
        RowStatus
                FROM SNMPv2-TC
        TimeStamp, StorageType
                FROM SNMPv2-TC          -- [RFC2579]
        InetAddressPrefixLength,
        InetAddressType,
        InetAddress,
        InetPortNumber
             FROM INET-ADDRESS-MIB      --  [RFC3291]                
        MODULE-COMPLIANCE,
        OBJECT-GROUP
            FROM SNMPv2-CONF       
        Dscp
          FROM DIFFSERV-DSCP-TC      -- [RFC3289]
        VPNIdOrZero
        FROM VPN-TC-STD-MIB                                  -- [RFC4265]
        mplsL3VpnVrfName,
		MplsL3VpnRtType,
		MplsL3VpnName,
        MplsL3VpnRouteDistinguisher
		    FROM MPLS-L3VPN-STD-MIB
		SnmpAdminString
	        FROM SNMP-FRAMEWORK-MIB
        fsMgmt
                FROM FS-SMI;

fsMplsVPNMgmtMIB MODULE-IDENTITY
        LAST-UPDATED "201301280000Z"
        ORGANIZATION "FS.COM Inc."
        CONTACT-INFO
                " 
                Tel: 400-865-2852 

                E-mail: https://www.fs.com/live_chat_service_mail.html"
        DESCRIPTION
                "This module defines fs mpls VPN management mibs."
        REVISION      "201301280000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { fsMgmt 122 }

fsMplsVPNMgmtMIBObjects     OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIB 1 }
fsMplsVPNMgmtMIBConformance OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIB 2 }
--****************************************************************

fsMplsVPNMgmtVrf            OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 1 }
fsMplsVPNMgmtRoute          OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 2 }
fsMplsVPNMgmtQos            OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 3 }
fsMplsVPNMgmtL2vpn          OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 4 }
fsMplsVPNMgmtL2vpnAc        OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 5 }
fsMplsVPNMgmtL3vpnConf      OBJECT IDENTIFIER ::= { fsMplsVPNMgmtMIBObjects 6 }

--****************************************************************
-- MPLS VPN Management Vrf Configure Objects
--****************************************************************


fsMplsVPNMgmtVrfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF FSMplsVPNMgmtVrfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table specified fs mpls l3vpn vrf information."
    ::={ fsMplsVPNMgmtVrf 1 }

fsMplsVPNMgmtVrfEntry OBJECT-TYPE
    SYNTAX  FSMplsVPNMgmtVrfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry in this table is meant to correspond to an entry in the Vrf table."
    INDEX { mplsL3VpnVrfName }
    ::= { fsMplsVPNMgmtVrfTable 1 }

FSMplsVPNMgmtVrfEntry ::=
    SEQUENCE {
        fsMplsVPNMgmtVrfName            DisplayString,
        fsMplsVPNMgmtVrfIntfFault       Unsigned32,
        fsMplsVPNMgmtVrfVpnId           VPNIdOrZero,
        fsMplsVPNMgmtVrfVpnIdType       INTEGER,
		fsMplsVPNMgmtVrfVpnRunState     INTEGER
    }

fsMplsVPNMgmtVrfName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The human-readable name of this VPN."
    ::= { fsMplsVPNMgmtVrfEntry 1 }

fsMplsVPNMgmtVrfIntfFault OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the number of fault in the interface binding this vrf."
    ::= { fsMplsVPNMgmtVrfEntry 2 }

fsMplsVPNMgmtVrfVpnId OBJECT-TYPE
    SYNTAX VPNIdOrZero
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The VPN ID as specified in [RFC2685].  If a VPN ID
        has not been specified for this VRF, then this
        variable SHOULD be set to a zero-length OCTET
        STRING."
    ::= { fsMplsVPNMgmtVrfEntry 3 }

fsMplsVPNMgmtVrfVpnIdType OBJECT-TYPE
    SYNTAX INTEGER {
        l3vpn(1),
        l2vpn(2),
        other(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The VPN ID Type"
    ::= { fsMplsVPNMgmtVrfEntry 4 }

fsMplsVPNMgmtVrfVpnRunState OBJECT-TYPE
    SYNTAX INTEGER {
        ACTIVE(1),
        INACTIVE(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The VPN Running State"
    ::= { fsMplsVPNMgmtVrfEntry 5 }

--****************************************************************
-- MPLS VPN Management Vrf route Objects
--****************************************************************

fsMplsVPNMgmtVrfRteTable OBJECT-TYPE
    SYNTAX SEQUENCE OF FSMplsVPNMgmtVrfRteEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table specified MPLS L3VPN VRF table routing information."
    REFERENCE 
        "[RFC4382]"
    ::= { fsMplsVPNMgmtRoute 1 }


fsMplsVPNMgmtVrfRteEntry OBJECT-TYPE
    SYNTAX FSMplsVPNMgmtVrfRteEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry in this table contained the routing infomation in one's vrf."
    INDEX { mplsL3VpnVrfName, fsMplsVPNMgmtRteDestType, fsMplsVPNMgmtRteDest, fsMplsVPNMgmtRtePfxLen, fsMplsVPNMgmtRtePolicy,
        fsMplsVPNMgmtRteNHopType, fsMplsVPNMgmtRteNextHop }
    ::= { fsMplsVPNMgmtVrfRteTable 1 }

FSMplsVPNMgmtVrfRteEntry ::= 
    SEQUENCE {
        fsMplsVPNMgmtRteDestType     InetAddressType,
        fsMplsVPNMgmtRteDest         InetAddress,
        fsMplsVPNMgmtRtePfxLen       InetAddressPrefixLength,
        fsMplsVPNMgmtRtePolicy       OBJECT IDENTIFIER,
        fsMplsVPNMgmtRteNHopType     InetAddressType,
        fsMplsVPNMgmtRteNextHop      InetAddress,
        fsMplsVPNMgmtRteDscp         Dscp,
        fsMplsVPNMgmtRteStorageType  StorageType
    }

fsMplsVPNMgmtRteDestType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of the fsMplsVPNMgmtRteDest address, as
        defined in the InetAddress MIB.
        Only those address types that may appear in an actual
        routing table are allowed as values of this object."
    REFERENCE
        "[RFC4001]"
    ::= { fsMplsVPNMgmtVrfRteEntry 1 }

fsMplsVPNMgmtRteDest  OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The destination IP address of this route.
        The type of this address is determined by the value of
        the fsMplsVPNMgmtRteDestType object."
    ::= { fsMplsVPNMgmtVrfRteEntry 2 }

fsMplsVPNMgmtRtePfxLen OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength (0..128)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the destination address
        before being compared to the value in the
        fsMplsVPNMgmtRteDest field."
    ::= { fsMplsVPNMgmtVrfRteEntry 3 }


fsMplsVPNMgmtRtePolicy OBJECT-TYPE
    SYNTAX     OBJECT IDENTIFIER
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object is an opaque object without any defined
        semantics.  Its purpose is to serve as an additional
        index that may delineate between multiple entries to
        the same destination.  The value { 0 0 } shall be used
        as the default value for this object."
    ::= { fsMplsVPNMgmtVrfRteEntry 4 }


fsMplsVPNMgmtRteNHopType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of the fsMplsVPNMgmtRteNextHop address,
        as defined in the InetAddress MIB.
        Value should be set to unknown(0) for non-remote
        routes.
        Only those address types that may appear in an actual
        routing table are allowed as values of this object."
    REFERENCE "RFC4001"
    ::= { fsMplsVPNMgmtVrfRteEntry 5 }

fsMplsVPNMgmtRteNextHop OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "On remote routes, the address of the next system en
        route.  For non-remote routes, a zero-length string.
        The type of this address is determined by the value of
        the fsMplsVPNMgmtRteNHopType object."
    ::= { fsMplsVPNMgmtVrfRteEntry 6 }

fsMplsVPNMgmtRteDscp OBJECT-TYPE
    SYNTAX  Dscp
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Differentiated Services Code-Point of this vrf route."
    ::= { fsMplsVPNMgmtVrfRteEntry 7 }

fsMplsVPNMgmtRteStorageType OBJECT-TYPE
    SYNTAX StorageType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The storage type of this vrf route entry."
    ::= { fsMplsVPNMgmtVrfRteEntry 8 }


fsMplsVPNMgmtQosLSP     OBJECT IDENTIFIER ::= { fsMplsVPNMgmtQos 1 }
fsMplsVPNMgmtQosFault   OBJECT IDENTIFIER ::= { fsMplsVPNMgmtQos 2 }
    

fsMplsVPNMgmtLSPNum  OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the working LSPs."
    ::= { fsMplsVPNMgmtQosLSP 1 }

fsMplsVPNMgmtBackupLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the backup LSPs."
    ::= { fsMplsVPNMgmtQosLSP 2 }

fsMplsVPNMgmtLDPLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the LDP LSPs."
    ::= { fsMplsVPNMgmtQosLSP 3 }

fsMplsVPNMgmtBGPLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the BGP LSPs."
    ::= { fsMplsVPNMgmtQosLSP 4 }

fsMplsVPNMgmtStaticLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the static LSPs."
    ::= { fsMplsVPNMgmtQosLSP 5 }

fsMplsVPNMgmtCRLDPLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the CR-LDP LSPs."
    ::= { fsMplsVPNMgmtQosLSP 6 }

fsMplsVPNMgmtRsvpLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the RSVP LSPs."
    ::= { fsMplsVPNMgmtQosLSP 7 }

fsMplsVPNMgmtBFDLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the LSP which detecting by BFD."
    ::= { fsMplsVPNMgmtQosLSP  8 }

fsMplsVPNMgmtOAMLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the LSP which detecting by OAM."
    ::= { fsMplsVPNMgmtQosLSP 9 }

fsMplsVPNMgmtIngressLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
        "Total number of the Ingress LSPs."
    ::= { fsMplsVPNMgmtQosLSP 10 }

fsMplsVPNMgmtTransitLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the transit LSPs."
    ::= { fsMplsVPNMgmtQosLSP 11 }
     
fsMplsVPNMgmtEgressLSPNum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total number of the Egress LSPs."
    ::= { fsMplsVPNMgmtQosLSP 12 }

fsMplsLSPFaultBFD OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The count of the fault which is detected by BFD."
    ::= { fsMplsVPNMgmtQosFault 1 }

fsMplsLSPFaultOAM OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The count of the fault which is detected by OAM."
    ::= { fsMplsVPNMgmtQosFault 2 }

fsMplsVrfFault OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The count of the L3VPN VRF fault."
    ::= { fsMplsVPNMgmtQosFault 3 }


fsMplsPWFault OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The count of the L2VPN PW fault."
    ::= { fsMplsVPNMgmtQosFault 4 }


--****************************************************************
-- MPLS VPN Management L2VPN Configure Objects
--****************************************************************

fsMplsVPNMgmtL2vpnTable OBJECT-TYPE
    SYNTAX SEQUENCE OF FSMplsVPNMgmtL2vpnEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table specified fs mpls l2vpn information."
    ::={ fsMplsVPNMgmtL2vpn 1 }

fsMplsVPNMgmtL2vpnEntry OBJECT-TYPE
    SYNTAX  FSMplsVPNMgmtL2vpnEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry in this table is meant to correspond to an entry in the l2vpn table."
    INDEX { fsMplsVPNMgmtL2vpnRmUID }
    ::= { fsMplsVPNMgmtL2vpnTable 1 }

FSMplsVPNMgmtL2vpnEntry ::=
    SEQUENCE {
	    fsMplsVPNMgmtL2vpnRmUID         Unsigned32,
        fsMplsVPNMgmtL2vpnNativeName    DisplayString,
        fsMplsVPNMgmtL2vpnServiceType   INTEGER,
		fsMplsVPNMgmtL2vpnOwner         DisplayString,
        fsMplsVPNMgmtL2vpnRunState      INTEGER,
        fsMplsVPNMgmtL2vpnCIR           Unsigned32,
        fsMplsVPNMgmtL2vpnPIR           Unsigned32		
    }

fsMplsVPNMgmtL2vpnRmUID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the rmUID of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnEntry 1 }

fsMplsVPNMgmtL2vpnNativeName OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The human-readable name of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnEntry 2 }

fsMplsVPNMgmtL2vpnServiceType OBJECT-TYPE
    SYNTAX INTEGER {
        PWE3(1),
        VPLS(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The ServiceType of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnEntry 3 }

fsMplsVPNMgmtL2vpnOwner OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The owner name of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnEntry 4 }

fsMplsVPNMgmtL2vpnRunState OBJECT-TYPE
    SYNTAX INTEGER {
        UP(1),
        DOWN(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Run State of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnEntry 5 }

fsMplsVPNMgmtL2vpnCIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the CIR of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnEntry 6 }

fsMplsVPNMgmtL2vpnPIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the PIR of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnEntry 7 }


--****************************************************************
-- MPLS VPN Management L2VPN AC Configure Objects
--****************************************************************
fsMplsVPNMgmtL2vpnAcTable OBJECT-TYPE
    SYNTAX SEQUENCE OF FSMplsVPNMgmtL2vpnAcEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table specified fs mpls l2vpn attach circuit information."
    ::={ fsMplsVPNMgmtL2vpnAc 1 }

fsMplsVPNMgmtL2vpnAcEntry OBJECT-TYPE
    SYNTAX  FSMplsVPNMgmtL2vpnAcEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry in this table is meant to correspond to an entry in the l2vpn attach circuit table."
    INDEX { fsMplsVPNMgmtL2vpnAcRmUID, fsMplsVPNMgmtL2vpnAcServiceRmUID, fsMplsVPNMgmtL2vpnAcNermUID, fsMplsVPNMgmtL2vpnAcPortrmUID }
    ::= { fsMplsVPNMgmtL2vpnAcTable 1 }

FSMplsVPNMgmtL2vpnAcEntry ::=
    SEQUENCE {
	    fsMplsVPNMgmtL2vpnAcRmUID           Unsigned32,
        fsMplsVPNMgmtL2vpnAcServiceRmUID    Unsigned32,
		fsMplsVPNMgmtL2vpnAcNermUID         Unsigned32,
		fsMplsVPNMgmtL2vpnAcPortrmUID       Unsigned32,
		fsMplsVPNMgmtL2vpnAcCvid            Unsigned32,
		fsMplsVPNMgmtL2vpnAcSvid            Unsigned32,
        fsMplsVPNMgmtL2vpnAcIngCIR          Unsigned32,
        fsMplsVPNMgmtL2vpnAcIngPIR          Unsigned32,
        fsMplsVPNMgmtL2vpnAcEgCIR           Unsigned32,
        fsMplsVPNMgmtL2vpnAcEgPIR           Unsigned32
    }

fsMplsVPNMgmtL2vpnAcRmUID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the rmUID of this l2vpn access Point."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 1 }

fsMplsVPNMgmtL2vpnAcServiceRmUID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the rmUID of this l2vpn instance."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 2 }

fsMplsVPNMgmtL2vpnAcNermUID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the attach circuit rmUID of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 3 }
	
fsMplsVPNMgmtL2vpnAcPortrmUID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the port of attach circuit rmUID of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 4 }

fsMplsVPNMgmtL2vpnAcCvid OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..50))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the custom vid of attach circuit of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 5 }

fsMplsVPNMgmtL2vpnAcSvid OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..50))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the service vid of attach circuit of this l2vpn."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 6 }

fsMplsVPNMgmtL2vpnAcIngCIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the ingress CIR of attach circuit of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 7 }

fsMplsVPNMgmtL2vpnAcIngPIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the ingress PIR of attach circuit of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 8 }

fsMplsVPNMgmtL2vpnAcEgCIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the egress CIR of attach circuit of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 9 }

fsMplsVPNMgmtL2vpnAcEgPIR OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..20))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the egress PIR of attach circuit of this l2vpn, unit: kbit/s."
    ::= { fsMplsVPNMgmtL2vpnAcEntry 10 }

-- fsMplsVPNMgmtL3vpnRTTable
fsMplsVPNMgmtL3vpnRTTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF FSMplsVPNMgmtL3vpnRTEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table specifies per-VRF route target association.
         Each entry identifies a connectivity policy supported
         as part of a VPN."
    ::= { fsMplsVPNMgmtL3vpnConf 1 }
	
fsMplsVPNMgmtL3vpnRTEntry OBJECT-TYPE
    SYNTAX        FSMplsVPNMgmtL3vpnRTEntry
    MAX-ACCESS    not-accessible

    STATUS        current
    DESCRIPTION
       "An entry in this table is created by an LSR for
        each route target configured for a VRF supporting
        a MPLS L3VPN instance.  The indexing provides an
        ordering per-VRF instance.  See [RFC4364] for a
        complete definition of a route target."
    INDEX  { mplsL3VpnVrfName, fsMplsVPNMgmtL3vpnRTIndex,
             fsMplsVPNMgmtL3vpnRTType }
    ::= { fsMplsVPNMgmtL3vpnRTTable 1 }
	
FSMplsVPNMgmtL3vpnRTEntry ::= SEQUENCE {
     fsMplsVPNMgmtL3vpnRTIndex       Unsigned32,
     fsMplsVPNMgmtL3vpnRTType        MplsL3VpnRtType,
     fsMplsVPNMgmtL3vpnRT            MplsL3VpnRouteDistinguisher,
     fsMplsVPNMgmtL3vpnRTDescr       SnmpAdminString,
     fsMplsVPNMgmtL3vpnRTRowStatus   RowStatus,
     fsMplsVPNMgmtL3vpnRTStorageType StorageType,
	 fsMplsVPNMgmtL3vpnName          DisplayString
   }

fsMplsVPNMgmtL3vpnRTIndex OBJECT-TYPE
   SYNTAX        Unsigned32 (1..4294967295)
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Auxiliary index for route targets configured for a
        particular VRF."
   ::= { fsMplsVPNMgmtL3vpnRTEntry 2 }

fsMplsVPNMgmtL3vpnRTType OBJECT-TYPE
   SYNTAX        MplsL3VpnRtType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The route target distribution type."
   ::= { fsMplsVPNMgmtL3vpnRTEntry 3 }

fsMplsVPNMgmtL3vpnRT OBJECT-TYPE
   SYNTAX        MplsL3VpnRouteDistinguisher
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The route target distribution policy."
   DEFVAL { "" }
   ::= { fsMplsVPNMgmtL3vpnRTEntry 4 }

fsMplsVPNMgmtL3vpnRTDescr OBJECT-TYPE
   SYNTAX        SnmpAdminString

   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Description of the route target."
   DEFVAL { "" }
   ::= { fsMplsVPNMgmtL3vpnRTEntry 5 }

fsMplsVPNMgmtL3vpnRTRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This variable is used to create, modify, and/or
        delete a row in this table.  When a row in this
        table is in active(1) state, no objects in that row
        can be modified except fsMplsVPNMgmtL3vpnRTRowStatus."
   ::= { fsMplsVPNMgmtL3vpnRTEntry 6 }

fsMplsVPNMgmtL3vpnRTStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The storage type for this VPN route target (RT) entry.
         Conceptual rows having the value 'permanent'
         need not allow write access to any columnar
         objects in the row."
   REFERENCE
        "See RFC2579."
   DEFVAL { volatile }
   ::= { fsMplsVPNMgmtL3vpnRTEntry 7 }

fsMplsVPNMgmtL3vpnName OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE (0..31))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "VPN Routing/Forwarding instance name"
    ::= { fsMplsVPNMgmtL3vpnRTEntry 8 }
                
-- VRF Configuration Table

fsMplsVPNMgmtL3vpnTable OBJECT-TYPE
   SYNTAX        SEQUENCE OF FSMplsVPNMgmtL3vpnEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS L3VPN
        VRF Table capability and associated information.
        Entries in this table define VRF routing instances
        associated with MPLS/VPN interfaces.  Note that
        multiple interfaces can belong to the same VRF
        instance.  The collection of all VRF instances
        comprises an actual VPN."
   ::= { fsMplsVPNMgmtL3vpnConf 2 }

fsMplsVPNMgmtL3vpnEntry OBJECT-TYPE
   SYNTAX        FSMplsVPNMgmtL3vpnEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every VRF capable of supporting MPLS L3VPN.  The
        indexing provides an ordering of VRFs per-VPN
        interface."
   INDEX       { fsMplsVPNMgmtL3vpnVpnName }
   ::= { fsMplsVPNMgmtL3vpnTable 1 }
FSMplsVPNMgmtL3vpnEntry ::= SEQUENCE {
  fsMplsVPNMgmtL3vpnVpnName                   MplsL3VpnName,
  fsMplsVPNMgmtL3vpnVpnId                     VPNIdOrZero,
  fsMplsVPNMgmtL3vpnDescription               SnmpAdminString,
  fsMplsVPNMgmtL3vpnRD                        MplsL3VpnRouteDistinguisher,
  fsMplsVPNMgmtL3vpnCreationTime              TimeStamp,
  fsMplsVPNMgmtL3vpnOperStatus                INTEGER,
  fsMplsVPNMgmtL3vpnActiveInterfaces          Gauge32,
  fsMplsVPNMgmtL3vpnAssociatedInterfaces      Unsigned32,
  fsMplsVPNMgmtL3vpnConfMidRteThresh          Unsigned32,
  fsMplsVPNMgmtL3vpnConfHighRteThresh         Unsigned32,
  fsMplsVPNMgmtL3vpnConfMaxRoutes             Unsigned32,
  fsMplsVPNMgmtL3vpnConfLastChanged           TimeStamp,
  fsMplsVPNMgmtL3vpnConfRowStatus             RowStatus,
  fsMplsVPNMgmtL3vpnConfAdminStatus           INTEGER,
  fsMplsVPNMgmtL3vpnConfStorageType           StorageType
}

fsMplsVPNMgmtL3vpnVpnName OBJECT-TYPE
   SYNTAX        MplsL3VpnName
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The human-readable name of this VPN.  This MAY
        be equivalent to the [RFC2685] VPN-ID, but may
        also vary.  If it is set to the VPN ID, it MUST
        be equivalent to the value of mplsL3VpnVrfVpnId.
        It is strongly recommended that all sites supporting
        VRFs that are part of the same VPN use the same
        naming convention for VRFs as well as the same VPN
        ID."
   REFERENCE
       "[RFC2685]"
   ::= { fsMplsVPNMgmtL3vpnEntry 1 }

fsMplsVPNMgmtL3vpnVpnId OBJECT-TYPE
   SYNTAX        VPNIdOrZero
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The VPN ID as specified in [RFC2685].  If a VPN ID
        has not been specified for this VRF, then this
        variable SHOULD be set to a zero-length OCTET
        STRING."
   ::= { fsMplsVPNMgmtL3vpnEntry 2 }

fsMplsVPNMgmtL3vpnDescription OBJECT-TYPE
   SYNTAX        SnmpAdminString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The human-readable description of this VRF."
   DEFVAL { "" }
   ::= { fsMplsVPNMgmtL3vpnEntry 3 }

fsMplsVPNMgmtL3vpnRD OBJECT-TYPE
   SYNTAX        MplsL3VpnRouteDistinguisher
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The route distinguisher for this VRF."
   DEFVAL { "" }
   ::= { fsMplsVPNMgmtL3vpnEntry 4 }

fsMplsVPNMgmtL3vpnCreationTime OBJECT-TYPE
   SYNTAX        TimeStamp
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The time at which this VRF entry was created."
   ::= { fsMplsVPNMgmtL3vpnEntry 5 }

fsMplsVPNMgmtL3vpnOperStatus OBJECT-TYPE
   SYNTAX        INTEGER { up (1),
                           down (2)
                         }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Denotes whether or not a VRF is operational.  A VRF is
        up(1) when there is at least one interface associated
        with the VRF whose ifOperStatus is up(1).  A VRF is
        down(2) when:
        a. There does not exist at least one interface whose
           ifOperStatus is up(1).
        b. There are no interfaces associated with the VRF."
   ::= { fsMplsVPNMgmtL3vpnEntry 6 }

fsMplsVPNMgmtL3vpnActiveInterfaces OBJECT-TYPE
   SYNTAX        Gauge32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of interfaces connected to this VRF with
        ifOperStatus = up(1).

        This value should increase when an interface is associated
        with the corresponding VRF and its corresponding ifOperStatus
        is equal to up(1).  If an interface is associated whose
        ifOperStatus is not up(1), then the value is not incremented
        until such time as it transitions to this state.

        This value should be decremented when an interface is
        disassociated with a VRF or the corresponding ifOperStatus
        transitions out of the up(1) state to any other state.
       "
   ::= { fsMplsVPNMgmtL3vpnEntry 7 }

fsMplsVPNMgmtL3vpnAssociatedInterfaces OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of interfaces connected to this VRF
        (independent of ifOperStatus type)."
   ::= { fsMplsVPNMgmtL3vpnEntry 8 }

fsMplsVPNMgmtL3vpnConfMidRteThresh    OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create


   STATUS        current
   DESCRIPTION
     "Denotes mid-level water marker for the number
      of routes that this VRF may hold."
  DEFVAL { 0 }
  ::= { fsMplsVPNMgmtL3vpnEntry 9 }

fsMplsVPNMgmtL3vpnConfHighRteThresh  OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Denotes high-level water marker for the number of
      routes that this VRF may hold."
   DEFVAL { 0 }
  ::= { fsMplsVPNMgmtL3vpnEntry 10 }

fsMplsVPNMgmtL3vpnConfMaxRoutes  OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Denotes maximum number of routes that this VRF is
      configured to hold.  This value MUST be less than or
      equal to mplsL3VpnVrfConfMaxPossRts unless it is set
      to 0."
   DEFVAL { 0 }
  ::= { fsMplsVPNMgmtL3vpnEntry 11 }

fsMplsVPNMgmtL3vpnConfLastChanged  OBJECT-TYPE
   SYNTAX        TimeStamp
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "The value of sysUpTime at the time of the last
      change of this table entry, which includes changes of
      VRF parameters defined in this table or addition or
      deletion of interfaces associated with this VRF."
  ::= { fsMplsVPNMgmtL3vpnEntry 12 }

fsMplsVPNMgmtL3vpnConfRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This variable is used to create, modify, and/or
        delete a row in this table.



        When a row in this table is in active(1) state, no
        objects in that row can be modified except
        mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus,
        and mplsL3VpnVrfConfStorageType."
  ::= { fsMplsVPNMgmtL3vpnEntry 13 }

fsMplsVPNMgmtL3vpnConfAdminStatus OBJECT-TYPE
   SYNTAX     INTEGER {
                      up(1),     -- ready to pass packets
                      down(2),   -- can't pass packets
                      testing(3) -- in some test mode
                }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates the desired operational status of this
         VRF."
  ::= { fsMplsVPNMgmtL3vpnEntry 14 }

fsMplsVPNMgmtL3vpnConfStorageType  OBJECT-TYPE
   SYNTAX      StorageType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
        "The storage type for this VPN VRF entry.
         Conceptual rows having the value 'permanent'
         need not allow write access to any columnar
         objects in the row."
   REFERENCE
        "See RFC2579."
   DEFVAL { volatile }
   ::= { fsMplsVPNMgmtL3vpnEntry 15 }
   
END