-- ============================================================================ -- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved. -- -- Description: this MIB is a MIB for fabric topology management -- -- Reference: -- Version: V2.3 -- History: -- V1.0 2004/01/13 created by wangjiao -- V1.1 2004/06/15 modifyied by huxiaolong -- V1.2 2004/07/13 modified by huxiaolong add fsFtmUnitRole node -- V1.3 2004/07/16 add fsFtmUnitRole to FsFtmUnitEntry SEQUENCE { } -- add fsFtmUnitRole OBJECT -- V2.0 2004-10-12 updated by gaolong -- Relocate fsFtmManMIB MODULE-IDENTITY. -- Change MAX-ACCESS clause value of fsFtmIndex to accessible-for-notify -- because this index is used when sending trap. -- Relocate fsFtmManMIBNotification. -- Add MODULE clause for fsFtmMIBCompliance. -- Change value of fsFtmAuthMode from underscores to hephens. -- V2.1 2004-11-20 updated by xuhui -- Add fsFtmFabricVlanID -- V2.2 2004-12-22 add fsFtmFabricType node by zhuchaopeng -- V2.3 2005-03-31 add fsFtmNumberMode by yangjianfeng -- ============================================================================ FS-FTM-MIB DEFINITIONS ::= BEGIN IMPORTS fsCommon FROM FS-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; fsFtmManMIB MODULE-IDENTITY LAST-UPDATED "200401131055Z" -- January 13, 2004 at 10:55 GMT ORGANIZATION "Fiberstore Co.,Limited" CONTACT-INFO "" DESCRIPTION "this MIB will maintain Fabric topology management. The MIB includes unit-id, unit-name and fabric authentication information." ::= { fsFtm 1 } fsFtm OBJECT IDENTIFIER ::= { fsCommon 1 } -- -- Node definitions -- fsFtmManMIBObjects OBJECT IDENTIFIER ::= { fsFtmManMIB 1 } fsFtmUnitTable OBJECT-TYPE SYNTAX SEQUENCE OF FsFtmUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of informations of XRN-Fabric Unit." ::= { fsFtmManMIBObjects 1 } fsFtmUnitEntry OBJECT-TYPE SYNTAX FsFtmUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring unit informations of XRN-Fabric." INDEX { fsFtmIndex } ::= { fsFtmUnitTable 1 } FsFtmUnitEntry ::= SEQUENCE { fsFtmIndex Integer32, fsFtmUnitID INTEGER, fsFtmUnitName OCTET STRING, fsFtmUnitRole INTEGER, fsFtmNumberMode INTEGER } fsFtmIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique index of a unit." ::= { fsFtmUnitEntry 1 } fsFtmUnitID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Identifer of unit in fabric. Its value should be between 1 and the maximum which defines in product specification. An exception is described in description of fsFtmNumberMode. In that case, the value of this object remains its original value after set to zero. " ::= { fsFtmUnitEntry 2 } fsFtmUnitName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Name of unit in XRN-Fabric. It consists of no more than 64 characters." ::= { fsFtmUnitEntry 3 } fsFtmUnitRole OBJECT-TYPE SYNTAX INTEGER { master(0), -- master unit slave(1) -- slave unit } MAX-ACCESS read-only STATUS current DESCRIPTION "Role of unit in XRN-Fabric. One unit in a XRN-Fabric acts as master role and others act as slave roles" ::= { fsFtmUnitEntry 4 } fsFtmNumberMode OBJECT-TYPE SYNTAX INTEGER { automatic(0), manual (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Numbering Mode of unit in XRN-Fabric. If the unit ID is assigned by the auto numbering algorithm, the numbering mode will be automatic numbering; if the unit ID (fsFtmUnitID) is assigned by the user, the numbering mode will be manual numbering; if fsFtmUnitID is set to be zero, the numbering mode will become automatic numbering." ::= { fsFtmUnitEntry 5 } fsFtmAuthMode OBJECT-TYPE SYNTAX INTEGER { ftm-none(0), ftm-simple(1), ftm-md5(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication mode of XRN-Fabric." ::= { fsFtmManMIBObjects 2 } fsFtmAuthValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication value of XRN-Fabric Feature. ftm_none mode means no authentication. In simple mode, the value is password of a string of 1 to 16 charactors. While in md5 mode, the value is key of a string within 16 charactors." ::= { fsFtmManMIBObjects 3 } fsFtmFabricVlanID OBJECT-TYPE SYNTAX INTEGER(2..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used for get and set the Fabric VlanID. Only is the equipment not in the stacking status, the value can be set." ::= { fsFtmManMIBObjects 4 } fsFtmFabricType OBJECT-TYPE SYNTAX INTEGER { outofStack(1), line(2), ring(3), mesh(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Topology type of Fabric. outofStack means this unit is not in stack." ::= { fsFtmManMIBObjects 5 } fsFtmManMIBNotification OBJECT IDENTIFIER ::= { fsFtmManMIB 3 } fsFtmUnitIDChange NOTIFICATION-TYPE OBJECTS { fsFtmIndex, fsFtmUnitID} STATUS current DESCRIPTION "When unit id changes in fabric, this trap is sent with unit index and its new id ." ::= { fsFtmManMIBNotification 1 } fsFtmUnitNameChange NOTIFICATION-TYPE OBJECTS { fsFtmIndex, fsFtmUnitName } STATUS current DESCRIPTION "When unit name changes in fabric, this trap is sent with unit index and its new name." ::= { fsFtmManMIBNotification 2 } fsFtmManMIBComformance OBJECT IDENTIFIER ::= { fsFtmManMIB 2 } fsFtmMIBCompliances OBJECT IDENTIFIER ::= { fsFtmManMIBComformance 1 } fsFtmMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for FTM implementing the MIB." MODULE FS-FTM-MIB MANDATORY-GROUPS { fsFtmConfigGroup, fsFtmNotificationGroup } ::= { fsFtmMIBCompliances 1 } fsFtmMIBGroups OBJECT IDENTIFIER ::= { fsFtmManMIBComformance 2 } fsFtmConfigGroup OBJECT-GROUP OBJECTS { fsFtmUnitID, fsFtmUnitName, fsFtmAuthMode, fsFtmAuthValue, fsFtmFabricVlanID, fsFtmFabricType } STATUS current DESCRIPTION "The basic collection of objects for sending trap of FTM Management." ::= { fsFtmMIBGroups 1 } fsFtmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { fsFtmUnitIDChange, fsFtmUnitNameChange } STATUS current DESCRIPTION "The basic collection of objects for sending trap of FTM Management." ::= { fsFtmMIBGroups 2 } END