-- =================================================================
-- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved.
--
-- Description: policy-based routing(PBR) MIB File
-- Reference:
-- Version: V1.3
-- History:
--      V1.0 created by Hou Yefei
--        initial version 2010-12-10
--      V1.1 2012-7-21 modified by Hou Yefei
--         Add fsPBRLocalPolicy
--         Add fsPBRMibPolicyNodeTable, fsPBRMibIfPolicyTable,
--             fsPBRMibMatchAclTable, fsPBRMibMatchAclTable,
--             fsPBRMibApplyNexthopTablel,
--             fsPBRMibApplyDefaultNexthopTable
--           2012-8-13 modified by Hou Yefei
--         Modify fsPBRNexthopTrapEnabled
--         Add fsPBRIPv6NexthopTrapEnabled
--      V1.2 2022-6-27 modified by Li Ke
--         Add fsPBRMibMinPktLen, fsPBRMibMaxPktLen,
--             fsPBRMibQosId, fsPBRMibQosIdMode,
--             fsPBRMibVxlanId, fsPBRMibDescription, fsPBRMibApplyContinue,
--             fsPBRMibApplyFailDropNextHop, fsPBRMibApplyIpDf,
--             fsPBRMibApplyLoadShareNextHop, fsPBRMibApplyLoadShareOutIf,
--             fsPBRMibApplyLSDefaultNextHop, fsPBRMibApplyLSDefaultOutIf,
--             fsPBRMibApplyStatisticsValue
--         Add fsPBRMibIfPolicyShareMode
--         Add fsPBRMibAclGroupName, fsPBRMibAclGroupVersion
--         Add fsPBRMibApplyNexthopInboundVpn, fsPBRMibApplyNexthopWeight,
--             fsPBRMibApplyNexthopPathId, fsPBRMibApplyNexthopPathIndex
--         Add fsPBRMibApplyDefNexthopInbVpn, fsPBRMibApplyDefNexthopPathId,
--             fsPBRMibApplyDefNexthopPathInd
--      V1.3 2023-1-5 modified by Li Ke
--         Modify fsPBRMibApplyNexthopTrackId,
--             fsPBRMibApplyDefaultNexthopTrackId
-- =================================================================
FS-PBR-MIB DEFINITIONS ::= BEGIN

IMPORTS
    fsCommon
        FROM FS-OID-MIB
    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32
        FROM SNMPv2-SMI
    TruthValue, DisplayString, RowStatus
        FROM SNMPv2-TC
    ifIndex
        FROM IF-MIB
    InetAddress, InetAddressType
        FROM INET-ADDRESS-MIB;

fsPBR MODULE-IDENTITY
    LAST-UPDATED
        "202301051023Z"
    ORGANIZATION
        "Fiberstore Co.,Limited"
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB contains objects to manage the configuration and information
        of PBR.  It routes IP packets by user defined policy
        other than normal destination address based routing.
        "
    REVISION
        "202301051023Z"
    DESCRIPTION
        "Modify fsPBRMibApplyNexthopTrackId and
             fsPBRMibApplyDefaultNexthopTrackId."
    REVISION
        "202206271115Z"
    DESCRIPTION
        "Add fsPBRMibMinPktLen, fsPBRMibMaxPktLen,
             fsPBRMibQosId, fsPBRMibQosIdMode,
             fsPBRMibVxlanId, fsPBRMibDescription, fsPBRMibApplyContinue,
             fsPBRMibApplyFailDropNextHop, fsPBRMibApplyIpDf,
             fsPBRMibApplyLoadShareNextHop, fsPBRMibApplyLoadShareOutIf,
             fsPBRMibApplyLSDefaultNextHop, fsPBRMibApplyLSDefaultOutIf,
             fsPBRMibApplyStatisticsValue
         Add fsPBRMibIfPolicyShareMode
         Add fsPBRMibAclGroupName, fsPBRMibAclGroupVersion
         Add fsPBRMibApplyNexthopInboundVpn, fsPBRMibApplyNexthopWeight,
             fsPBRMibApplyNexthopPathId, fsPBRMibApplyNexthopPathIndex
         Add fsPBRMibApplyDefNexthopInbVpn, fsPBRMibApplyDefNexthopPathId,
             fsPBRMibApplyDefNexthopPathInd."
    REVISION
        "201012101558Z"
    DESCRIPTION
        "The initial version of this MIB file."
    ::= { fsCommon 113 }

-- Objects define
fsPBRObjects OBJECT IDENTIFIER ::= { fsPBR 1 }

fsPBRGlobal OBJECT IDENTIFIER ::= { fsPBRObjects 1 }

fsPBRNexthopTrapEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value is a global setting only for IPv4 PBR.  If the
         value is set to 'false', the feature is disabled."
    DEFVAL { true }
    ::= { fsPBRGlobal 1 }

fsPBRLocalPolicy OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value is a global setting.  An existing policy name setting enables
        local PBR for IPv4 packets initiated by the device.
        Only one policy can be applied locally.
        An empty name setting disables the feature.
        "
    ::= { fsPBRGlobal 2 }

fsPBRIPv6NexthopTrapEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value is a global setting only for IPv6 PBR.  If the
         value is set to 'false', the feature is disabled."
    DEFVAL { true }
    ::= { fsPBRGlobal 3 }

-- PBR trap table
fsPBRMibTrap OBJECT IDENTIFIER ::= { fsPBRObjects 2 }

fsPBRTrapObjects OBJECT IDENTIFIER  ::= { fsPBRMibTrap 1 }

fsPBRNexthopAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Indicating address type of fsPBRNexthopAddr, which can be IPv4
        or IPv6."
    ::= { fsPBRTrapObjects 1 }

fsPBRNexthopAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The involved next hop IP address of trap information."
    ::= { fsPBRTrapObjects 2 }

fsPBRTraps OBJECT IDENTIFIER  ::= { fsPBRMibTrap 2 }

fsPBRTrapsPrefix OBJECT IDENTIFIER  ::= { fsPBRTraps 0 }

fsPBRNexthopFailedTrap NOTIFICATION-TYPE
    OBJECTS
    {
        fsPBRNexthopAddrType,
        fsPBRNexthopAddr
    }
    STATUS      current
    DESCRIPTION
        "When the next hop of PBR apply clause became
        unreachable according to routing information, trap is generated
        and is sent to the remote monitoring device."
    ::= { fsPBRTrapsPrefix 1 }

-- PBR policy node table
fsPBRTables OBJECT IDENTIFIER ::= { fsPBR 2 }

fsPBRMibPolicyNodeTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibPolicyNodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for PBR nodes.
                "
    ::= { fsPBRTables 1 }

fsPBRMibPolicyNodeEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibPolicyNodeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for PBR nodes.
                "
    INDEX
    {
            fsPBRMibPolicyNodeAddrType,
            fsPBRMibPolicyName,
            fsPBRMibPolicyNodeId
    }
    ::= { fsPBRMibPolicyNodeTable 1 }

FsPBRMibPolicyNodeEntry ::=
    SEQUENCE
    {
            fsPBRMibPolicyNodeAddrType           InetAddressType,
            fsPBRMibPolicyName                   DisplayString,
            fsPBRMibPolicyNodeId                 Integer32,
            fsPBRMibPolicyNodeMode               TruthValue,
            fsPBRMibPolicyNodeRowStatus          RowStatus,
            fsPBRMibMinPktLen                    Integer32,
            fsPBRMibMaxPktLen                    Integer32,
            fsPBRMibQosId                        Integer32,
            fsPBRMibQosIdMode                    INTEGER,
            fsPBRMibVxlanId                      Integer32,
            fsPBRMibDescription                  DisplayString,
            fsPBRMibApplyContinue                TruthValue,
            fsPBRMibApplyFailDropNextHop         TruthValue,
            fsPBRMibApplyIpDf                    Integer32,
            fsPBRMibApplyLoadShareNextHop        TruthValue,
            fsPBRMibApplyLoadShareOutIf          TruthValue,
            fsPBRMibApplyLSDefaultNextHop        TruthValue,
            fsPBRMibApplyLSDefaultOutIf          TruthValue,
            fsPBRMibApplyStatisticsValue         TruthValue
    }

fsPBRMibPolicyNodeAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Address type of policy node, which can be IPv4 or IPv6, Dual-stack."
    ::= { fsPBRMibPolicyNodeEntry 1 }

fsPBRMibPolicyName    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..19))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Policy name of PBR node."
    ::= { fsPBRMibPolicyNodeEntry 2 }

fsPBRMibPolicyNodeId   OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Sequence identifier of PBR node."
    ::= { fsPBRMibPolicyNodeEntry 3 }

fsPBRMibPolicyNodeMode   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Mode of PBR node.  If the mode of a node is marked as true,
                the packets that meet the matching rules are processed by
                action rules in the node.  If the mode of a node is marked as
                false, the packets that meet the matching rules are
                sent back to the normal forwarding path."
    DEFVAL { true }
    ::= { fsPBRMibPolicyNodeEntry 4 }

fsPBRMibPolicyNodeRowStatus   OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Operation status of this table entry.
            Three actions are used: active,
            createAndGo, and destroy.
            "
    ::= { fsPBRMibPolicyNodeEntry 5 }

fsPBRMibMinPktLen    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the minimum IP packet length in the range of 1 and 65535.
                 Value 0 indicates that this rule is not set."
    ::= { fsPBRMibPolicyNodeEntry 6 }

fsPBRMibMaxPktLen    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the maximum IP packet length in the range of 1 and 65535.
                 The maximum length must be no less than the minimum length.
                 The maximum and the minimum lengths must be both configured.
                 Value 0 indicates that this rule is not set."
    ::= { fsPBRMibPolicyNodeEntry 7 }

fsPBRMibQosId    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies a local Quality of Service(QoS) ID in the range of 1 and 4095.
                 Value 0 indicates that this rule is not set."
    ::= { fsPBRMibPolicyNodeEntry 8 }

fsPBRMibQosIdMode    OBJECT-TYPE
    SYNTAX INTEGER
    {
        invalid(1),
        normal(2),
        qppb(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The mode of the QoS Local ID.
                 The default value is normal."
    ::= { fsPBRMibPolicyNodeEntry 9 }

fsPBRMibVxlanId    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies a VXLAN ID in the range of 0 to 16777215.
                 Value -1 indicates that this rule is not set."
    ::= { fsPBRMibPolicyNodeEntry 10 }

fsPBRMibDescription    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..127))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "A description for a policy node."
    ::= { fsPBRMibPolicyNodeEntry 11 }

fsPBRMibApplyContinue    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Use apply continue to compare packets
                 with the next policy node upon failure on the current node.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 12 }

fsPBRMibApplyFailDropNextHop    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Configure the policy node to drop matching packets when
                 the next hop is invalid.  If no next hops are specified
                 on the policy node, this command drops all packets that
                 match the node. Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 13 }

fsPBRMibApplyIpDf    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Sets the Don't Fragment(DF) bit in the IP header of
                 matching packets. The value can be 0 or 1.
                 Value -1 indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 14 }

fsPBRMibApplyLoadShareNextHop    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Enables load sharing among multiple next hops.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 15 }

fsPBRMibApplyLoadShareOutIf    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Enables load sharing among multiple output interfaces.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 16 }

fsPBRMibApplyLSDefaultNextHop    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Enables load sharing among multiple default next hops.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 17 }

fsPBRMibApplyLSDefaultOutIf    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Enables load sharing among multiple default output interfaces.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 18 }

fsPBRMibApplyStatisticsValue    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Use apply statistics to enable match counting on a policy node.
                 Value FALSE indicates that this action is not set."
    ::= { fsPBRMibPolicyNodeEntry 19 }

-- PBR local policy


-- PBR interface policy relation table

fsPBRMibIfPolicyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibIfPolicyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for interfaces being applied with PBR
                 nodes with the same policy name.
                "
    ::= { fsPBRTables 2 }

fsPBRMibIfPolicyEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibIfPolicyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for reference relation between interface and policy
                nodes."
    INDEX
    {
            fsPBRMibPolicyAddressType,
            ifIndex
    }
    ::= { fsPBRMibIfPolicyTable 1 }

FsPBRMibIfPolicyEntry ::=
    SEQUENCE
    {
            fsPBRMibPolicyAddressType   InetAddressType,
            fsPBRMibAppliedPolicyName   DisplayString,
            fsPBRMibIfPolicyRowStatus   RowStatus,
            fsPBRMibIfPolicyShareMode   TruthValue
    }

fsPBRMibPolicyAddressType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION  "Address type of policy node, which can be
                 IPv4 or IPv6, Dual-stack."
    ::= { fsPBRMibIfPolicyEntry 1 }

fsPBRMibAppliedPolicyName    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..19))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Policy name of PBR nodes."
    ::= { fsPBRMibIfPolicyEntry 2 }

fsPBRMibIfPolicyRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Operation status of this table entry.
            Three actions are used: active,
            createAndGo, and destroy.
            "
    ::= { fsPBRMibIfPolicyEntry 3 }

fsPBRMibIfPolicyShareMode    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Applies the policy in resource sharing mode.
                 In this mode, all interfaces on an interface card
                 with the same policy applied share one hardware resource."
    DEFVAL { false }
    ::= { fsPBRMibIfPolicyEntry 4 }

-- PBR policy node acl rule table

fsPBRMibMatchAclTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibMatchAclEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for ACLs being used by a policy node.  Only one ACL
                 can be used within a node at most.
                "
    ::= { fsPBRTables 3 }

fsPBRMibMatchAclEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibMatchAclEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for policy node that uses an ACL group as its
                if-match rule."
    INDEX
    {
            fsPBRMibPolicyNodeAddrType,
            fsPBRMibPolicyName,
            fsPBRMibPolicyNodeId
    }
    ::= { fsPBRMibMatchAclTable 1 }

FsPBRMibMatchAclEntry ::=
    SEQUENCE
    {
            fsPBRMibAclGroupId   Integer32,
            fsPBRMibAclGroupName OCTET STRING,
            fsPBRMibAclGroupVersion   INTEGER
    }

fsPBRMibAclGroupId    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Index of number-acl group.
                 Setting -1 indicates closing this rule.
                 When ACLName is configured with a valid value,
                 value -1 will be returned for ACLNumber.
                "
    ::= { fsPBRMibMatchAclEntry 1 }

fsPBRMibAclGroupName   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..63))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION "ACL match criterion by name. The ACL name must start with
                 letter a to z or A to Z.  The ACL name cannot be all in
                 any combination of upper-case and lower-case letters.
                 To delete an ACL match criterion, you must configure the value
                 for ACLNumber as -1."
    ::= { fsPBRMibMatchAclEntry 2 }

fsPBRMibAclGroupVersion    OBJECT-TYPE
    SYNTAX INTEGER
    {
        invalid(1),
        ipv4(2),
        ipv6(3),
        userdefined(4)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The type of the ACL.
                 The fsPBRMibAclGroupVersion can only be configured
                 when the policy node type is Dual-stack, and cannot be empty."
    ::= { fsPBRMibMatchAclEntry 3 }

-- PBR policy node apply precedence action table

fsPBRMibApplyPrecedenceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibApplyPrecedenceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for precedence values being used by a policy node.
                 Only one precedence value can be used within a node at most.
                "
    ::= { fsPBRTables 4 }

fsPBRMibApplyPrecedenceEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibApplyPrecedenceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for policy node with an action
                 to set IP precedence for matching packets.
                "
    INDEX
    {
            fsPBRMibPolicyNodeAddrType,
            fsPBRMibPolicyName,
            fsPBRMibPolicyNodeId
    }
    ::= { fsPBRMibApplyPrecedenceTable 1 }

FsPBRMibApplyPrecedenceEntry ::=
    SEQUENCE
    {
            fsPBRMibApplyPrecedenceValue Integer32
    }

fsPBRMibApplyPrecedenceValue    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Value of precedence being applied on IP header.
                   <0-7>           Value of precedence
                   routine         Specify routine precedence(0)
                   priority        Specify priority precedence(1)
                   immediate       Specify immediate precedence(2)
                   flash           Specify flash precedence(3)
                   flash-override  Specify flash-override precedence(4)
                   critical        Specify critical precedence(5)
                   internet        Specify internetwork control precedence(6)
                   network         Specify network control precedence(7)
                 Setting -1 indicates closing this action.
                "
    ::= { fsPBRMibApplyPrecedenceEntry 1 }

-- PBR policy node apply next hop action table

fsPBRMibApplyNexthopTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibApplyNexthopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for next hop actions being used by a policy node.
                "
    ::= { fsPBRTables 5 }

fsPBRMibApplyNexthopEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibApplyNexthopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for policy node with an action
                 to set next hop for matching packets.
                "
    INDEX
    {
            fsPBRMibPolicyNodeAddrType,
            fsPBRMibPolicyName,
            fsPBRMibPolicyNodeId,
            fsPBRMibApplyNexthopIndex
    }
    ::= { fsPBRMibApplyNexthopTable 1 }

FsPBRMibApplyNexthopEntry ::=
    SEQUENCE
    {
            fsPBRMibApplyNexthopIndex       Integer32,
            fsPBRMibApplyNexthopVpnName     DisplayString,
            fsPBRMibApplyNexthopAddressType InetAddressType,
            fsPBRMibApplyNexthopAddress     InetAddress,
            fsPBRMibApplyNexthopTrackId     Integer32,
            fsPBRMibApplyNexthopDirect      TruthValue,
            fsPBRMibApplyNexthopRowStatus   RowStatus,
            fsPBRMibApplyNexthopInboundVpn  TruthValue,
            fsPBRMibApplyNexthopWeight      Integer32,
            fsPBRMibApplyNexthopPathId      Integer32,
            fsPBRMibApplyNexthopPathIndex   Integer32
    }

fsPBRMibApplyNexthopIndex    OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Index of next hop for the apply next hop action."
    ::= { fsPBRMibApplyNexthopEntry 1 }

fsPBRMibApplyNexthopVpnName    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Name of VPN instance where apply next hop action is used."
    ::= { fsPBRMibApplyNexthopEntry 2 }

fsPBRMibApplyNexthopAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Address type of fsPBRMibApplyNexthopAddress,
                 which can be IPv4 or IPv6."
    ::= { fsPBRMibApplyNexthopEntry 3 }

fsPBRMibApplyNexthopAddress     OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Next hop IP address of apply next hop action."
    ::= { fsPBRMibApplyNexthopEntry 4 }

fsPBRMibApplyNexthopTrackId     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Identifier of track object related with next hop.
                 Specifies a track entry by its number in the range of 1 to 1024.
                 Setting 0 indicates closing this function.
                "
    ::= { fsPBRMibApplyNexthopEntry 5 }

fsPBRMibApplyNexthopDirect        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Direct route attribute of next hop
                according to route information."
    DEFVAL { false }
    ::= { fsPBRMibApplyNexthopEntry 6 }


fsPBRMibApplyNexthopRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Operation status of this table entry.
            Three actions are used: active,
            createAndGo, and destroy.
            "
    ::= { fsPBRMibApplyNexthopEntry 7 }

fsPBRMibApplyNexthopInboundVpn        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the VPN instance where the inbound interface belongs.
                 If the value is set to TRUE, the VPN instance name will be ignored."
    DEFVAL { false }
    ::= { fsPBRMibApplyNexthopEntry 8 }

fsPBRMibApplyNexthopWeight     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies a load sharing weight in the range of 1 and 100 for the next hop."
    DEFVAL { 10 }
    ::= { fsPBRMibApplyNexthopEntry 9 }

fsPBRMibApplyNexthopPathId     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies a service chain by its path ID in the range of 1 and 16777215."
    ::= { fsPBRMibApplyNexthopEntry 10 }

fsPBRMibApplyNexthopPathIndex     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies a node in the service chain as
                 a next hop by its index in the range of 1 and 255."
    ::= { fsPBRMibApplyNexthopEntry 11 }

-- PBR policy node apply default next hop action table

fsPBRMibApplyDefaultNexthopTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsPBRMibApplyDefaultNexthopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table for default next hop actions being used by a policy
                node."
    ::= { fsPBRTables 6 }

fsPBRMibApplyDefaultNexthopEntry  OBJECT-TYPE
    SYNTAX      FsPBRMibApplyDefaultNexthopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry for policy node with an action
                 to set default next hop for matching packets.
                "
    INDEX
    {
            fsPBRMibPolicyNodeAddrType,
            fsPBRMibPolicyName,
            fsPBRMibPolicyNodeId,
            fsPBRMibApplyDefaultNexthopIndex
    }
    ::= { fsPBRMibApplyDefaultNexthopTable 1 }

FsPBRMibApplyDefaultNexthopEntry ::=
    SEQUENCE
    {
            fsPBRMibApplyDefaultNexthopIndex       Integer32,
            fsPBRMibApplyDefaultNexthopVpnName     DisplayString,
            fsPBRMibApplyDefaultNexthopAddressType InetAddressType,
            fsPBRMibApplyDefaultNexthopAddress     InetAddress,
            fsPBRMibApplyDefaultNexthopTrackId     Integer32,
            fsPBRMibApplyDefaultNexthopDirect      TruthValue,
            fsPBRMibApplyDefaultNexthopRowStatus   RowStatus,
            fsPBRMibApplyDefNexthopInbVpn          TruthValue,
            fsPBRMibApplyDefNexthopPathId          Integer32,
            fsPBRMibApplyDefNexthopPathInd         Integer32
    }

fsPBRMibApplyDefaultNexthopIndex    OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Index of default next hop for the apply
                default next hop action."
    ::= { fsPBRMibApplyDefaultNexthopEntry 1 }

fsPBRMibApplyDefaultNexthopVpnName    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Name of VPN instance where apply default next hop action
                 is used."
    ::= { fsPBRMibApplyDefaultNexthopEntry 2 }

fsPBRMibApplyDefaultNexthopAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Address type of fsPBRMibApplyDefaultNexthopAddress,
                 which can be IPv4 or IPv6."
    ::= { fsPBRMibApplyDefaultNexthopEntry 3 }

fsPBRMibApplyDefaultNexthopAddress     OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Next hop IP address of apply default next hop action."
    ::= { fsPBRMibApplyDefaultNexthopEntry 4 }

fsPBRMibApplyDefaultNexthopTrackId     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Identifier of track object related with default next hop.
                 Specifies a track entry by its number in the range of 1 to 1024.
                 Setting 0 indicates closing this function."
    ::= { fsPBRMibApplyDefaultNexthopEntry 5 }

fsPBRMibApplyDefaultNexthopDirect        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Direct route attribute of apply default next hop
                address according to route information."
    DEFVAL { false }
    ::= { fsPBRMibApplyDefaultNexthopEntry 6 }

fsPBRMibApplyDefaultNexthopRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Operation status of this table entry.
            Three actions are used: active,
            createAndGo, and destroy.
            "
    ::= { fsPBRMibApplyDefaultNexthopEntry 7 }

fsPBRMibApplyDefNexthopInbVpn        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the VPN instance where the inbound interface belongs.
                If the value is set to TRUE, the VPN instance name will be ignored."
    DEFVAL { false }
    ::= { fsPBRMibApplyDefaultNexthopEntry 8 }

fsPBRMibApplyDefNexthopPathId     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies a service chain by its path ID in the range of 1 and 16777215."
    ::= { fsPBRMibApplyDefaultNexthopEntry 9 }

fsPBRMibApplyDefNexthopPathInd     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies a node in the service chain as
                 a default next hop by its index in the range of 1 and 255."
    ::= { fsPBRMibApplyDefaultNexthopEntry 10 }

END