-- =============================================================================
-- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved.
--
-- Description:
--   The file defines a MIB to provide MESH configuration information.
-- Reference:
-- Version: V1.6
-- History:
--   V1.0 2008-07-08 Initial version, created by ChangHuifeng
--   V1.1 2008-11-07 modified by liyugang
--        Add fsDot11sMeshLinkStatisTable, fsDot11sMeshNbrStatusTable
--        to fsDot11sMeshStatusGroup
--   V1.2 2009-08-01 modified by Wang Shaojie
--        Add fsDot11sMeshLinkIFName to fsDot11sMeshLinkStatisTable.
--   V1.3 2013-09-14 modified by Zhang Siyu
--        Add fsDot11sMeshLinkType to fsDot11sMeshLinkStatusTable
--   V1.4 2015-02-02 modified by Xiao min
--        Add fsDot11sMeshLinkSNR to fsDot11sMeshLinkStatusTable
--        Add fsDot11sMeshLinkNoise to fsDot11sMeshLinkStatusTable
--        Add fsDot11sMeshLinkPeerSNR to fsDot11sMeshLinkStatusTable
--        Add fsDot11sMeshLinkPeerNoise to fsDot11sMeshLinkStatusTable
--   V1.5 2015-05-6 modified by guoxuzhen
--        Add fsDot11sMeshAKMMode, fsDot11sSimplerKey to FsDot11sMeshPflTable
--        Add fsDot11sBindInterface to fsDot11sRadioCfgTable
--        2015-08-14 modified by Xiao min
--        Add fsDot11sMeshLinkPeerIPAddress to fsDot11sMeshLinkStatusTable
--        Add fsDot11sMeshLinkPeerSystemName to fsDot11sMeshLinkStatusTable
--   V1.6 2018-05-15 modified by liuxiaolong
--        Add fsDot11sMlspExtCfgTable to fsDot11sConfigGroup
--        Add fsDot11sMeshLinkNotifyGroup to fsDot11sMesh
--        Add fsDot11sMlspMode to fsDot11sMpPlcyTable
--        Add fsDot11sWaveGuideHoldRSSI to fsDot11sMpPlcyTable
--        Add fsDot11sWaveGuideSwitch to fsDot11sMpPlcyTable
--        Add fsDot11sOptimizeEnable to fsDot11sMpPlcyTable
--        Add fsDot11sOptimizeThreshold to fsDot11sMpPlcyTable
--        Add fsDot11sMlspLogEnable to fsDot11sMpPlcyTable
--        Add fsDot11sMlspLogInterval to fsDot11sMpPlcyTable
--        Add fsDot11sActiveKeepaliveCount to fsDot11sMpPlcyTable
--        Add fsDot11sLinkEstaThreshold to fsDot11sMpPlcyTable
--        Add fsDot11sTransmissionMethod to fsDot11sMpPlcyTable
--        Add fsDot11sTransmitLevel to fsDot11sMpPlcyTable
--        Add fsDot11sTempLinkEnable to fsDot11sMpPlcyTable
-- =============================================================================
FS-DOT11S-MESH-MIB DEFINITIONS ::= BEGIN

IMPORTS
        TruthValue,
        MacAddress,
        RowStatus
    FROM SNMPv2-TC
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Integer32,
        Unsigned32,
        Counter32,
        IpAddress,
        NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        fsDot11, FsDot11RadioElementIndex, fsDot11APElementIndex, FsDot11AKMType
    FROM FS-DOT11-REF-MIB;

fsDot11sMesh MODULE-IDENTITY
    LAST-UPDATED "201805151000Z"        -- May 15, 2018 at 10:00 GMT
    ORGANIZATION
        "Fiberstore Co.,Limited"
    CONTACT-INFO
        ""
    DESCRIPTION
        "The file defines a MIB to provide MESH configuration information.

        GLOSSARY

        IEEE 802.11
        Standard to encourage interoperability among
        wireless networking equipment.

        Access point (AP)
        Transmitter/receiver (transceiver) device
        that commonly connects and transports data
        between a wireless network and a wired network.

        Access control (AC)
        To control and manage multi-APs, it will bridge
        wireless and wired network.

        Fat AP
        Applied in the home, SOHO and so on, and it could
        work independently without help from AC.

        Fit AP
        Applied in the enterprise environment, it will work
        under the control and management from AC.

        BSS
        IEEE 802.11 Basic Service Set (Radio Cell).  The
        BSS of an AP comprises of the stations directly
        associating with the AP.

        Radio
        The chip set to receive and send wireless signal.

        Mesh
        A network consisting of two or more mesh points
        which communicate with each other via mesh services.

        Mesh Point (MP)
        An IEEE 802.11 entity that contains an IEEE 802.11-conformant
        medium access control (MAC) and physical layer (PHY) interface
        to the wireless medium (WM) that supports mesh services.

        Mesh Access Point (MAP)
        A mesh point that is collocated with one or more access points.

        Mesh Portal Point (MPP)
        A mesh point that is collocated with one or more portals.

        Mesh Link
        A link between two MPs.

        Simultaneous Authentication of Equals (SAE)
        A password-authenticated key exchange based on
        a zero-knowledge proof."
    REVISION "201805151000Z"        -- May 15, 2018 at 10:00 GMT
    DESCRIPTION
        "Add new nodes and new table"
    REVISION "201508141000Z"        -- Aug 01, 2009 at 10:00 GMT
    DESCRIPTION
        "Add fsDot11sMeshLinkPeerIPAddress to fsDot11sMeshLinkStatusTable,
         Add fsDot11sMeshLinkPeerSystemName to fsDot11sMeshLinkStatusTable"
    REVISION "201505061500Z"        -- May 6, 2015 at 15:00 GMT
    DESCRIPTION
        "Add new nodes."
    REVISION "200908011000Z"        -- Aug 01, 2009 at 10:00 GMT
    DESCRIPTION
        "Add new nodes."
    REVISION "200811071000Z"        -- Nov 07, 2008 at 10:00 GMT
    DESCRIPTION
        "Modified to add new nodes and a new table."
    REVISION "200807081800Z"        -- July 8, 2008 at 18:00 GMT
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { fsDot11 11 }

-- *****************************************************************************
-- *  Major sections
-- *****************************************************************************

fsDot11sConfigGroup OBJECT IDENTIFIER  ::= { fsDot11sMesh 1 }
--  Dot11s Configuration Group has the following children:
--  fsDot11sMeshGlobalPara             ::= { fsDot11sConfigGroup 1 }
--  fsDot11sMeshPflTable               ::= { fsDot11sConfigGroup 2 }
--  fsDot11sMpPlcyTable                ::= { fsDot11sConfigGroup 3 }
--  fsDot11sMlspCfgTable               ::= { fsDot11sConfigGroup 4 }
--  fsDot11sRadioCfgTable              ::= { fsDot11sConfigGroup 5 }
--  fsDot11sAPCfgTable                 ::= { fsDot11sConfigGroup 6 }
--  fsDot11sMlspExtCfgTable            ::= { fsDot11sConfigGroup 7 }

fsDot11sWDSConfigGroup OBJECT IDENTIFIER ::= { fsDot11sMesh 2 }
--  Dot11s WDS Configuration Group has the following children:
--  fsDot11sWDSPeerMacTable         ::= { fsDot11sWDSConfigGroup 1 }

fsDot11sMeshStatusGroup OBJECT IDENTIFIER ::= { fsDot11sMesh 3 }
--  Dot11s Mesh Status Group has the following children:
--  fsDot11sMeshLinkStatusTable    ::= { fsDot11sMeshStatusGroup 1 }
--  fsDot11sMeshLinkStatisTable    ::= { fsDot11sMeshStatusGroup 2 }
--  fsDot11sMeshNbrStatusTable     ::= { fsDot11sMeshStatusGroup 3 }

fsDot11sMeshLinkNotifyGroup OBJECT IDENTIFIER ::= { fsDot11sMesh 4 }
-- *****************************************************************************
-- *  fsDot11sMeshGlobalPara Definition
-- *****************************************************************************
fsDot11sMeshGlobalPara OBJECT IDENTIFIER  ::= { fsDot11sConfigGroup 1 }

fsDot11sMeshMkdID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the mesh key distributor identifier (MKD-ID).
        If the MKD-ID is not configured, the value is '00:00:00:00:00:00'."
    ::= { fsDot11sMeshGlobalPara 1 }

-- *****************************************************************************
-- * End of fsDot11sMeshGlobalPara Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMeshPflTable Definition
-- *****************************************************************************
fsDot11sMeshPflTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMeshPflEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh profile.
        A mesh profile is created and mapped to a MP so that
        it can provide mesh services to other MPs which have the same
        mesh ID.
        When the mesh profile is enabled, all of the object in this table
        cannot be modified except fsDot11sMeshPflEnable.
        The mesh profile cannot be deleted when it is bound with the radio."
    ::= { fsDot11sConfigGroup 2 }

fsDot11sMeshPflEntry OBJECT-TYPE
    SYNTAX      FsDot11sMeshPflEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of a mesh profile."
    INDEX
        {
            fsDot11sMeshPflIndex
        }
    ::= { fsDot11sMeshPflTable 1 }

FsDot11sMeshPflEntry ::= SEQUENCE
    {
        fsDot11sMeshPflIndex         Integer32,
        fsDot11sMeshPflMeshID        OCTET STRING,
        fsDot11sMeshPflBindIntNum    Integer32,
        fsDot11sMeshPflKeepAlive     Integer32,
        fsDot11sMeshPflBackhaulRate  Integer32,
        fsDot11sMeshMkdServEnable    TruthValue,
        fsDot11sMeshPflEnable        TruthValue,
        fsDot11sMeshPflRowStatus     RowStatus,
        fsDot11sMeshAKMMode          FsDot11AKMType,
        fsDot11sMeshSimpleKey        OCTET STRING
    }

fsDot11sMeshPflIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the index of the mesh profile."
    ::= { fsDot11sMeshPflEntry 1 }

fsDot11sMeshPflMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh ID of the mesh profile.
        The string length of this object is zero when the mesh ID is not
        configured.  If the mesh ID is not configured, fsDot11sMeshPflEnable
        cannot be set to 'true'."
    ::= { fsDot11sMeshPflEntry 2 }

fsDot11sMeshPflBindIntNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the specified mesh interface number
        bound to the mesh profile.
        If the value is set to -1, the binding will be removed."
    DEFVAL      { -1 }
    ::= { fsDot11sMeshPflEntry 3 }

fsDot11sMeshPflKeepAlive OBJECT-TYPE
    SYNTAX      Integer32(1..1800)
    UNITS       "second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link keep-alive interval."
    ::= { fsDot11sMeshPflEntry 4 }

fsDot11sMeshPflBackhaulRate OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "Kbps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link backhaul rate."
    ::= { fsDot11sMeshPflEntry 5 }

fsDot11sMeshMkdServEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh key distributor (MKD)
        service for the mesh profile is enabled.
        'true': The MKD service for the mesh profile is enabled.
        'false': The MKD service for the mesh profile is disabled."
    DEFVAL      { false }
    ::= { fsDot11sMeshPflEntry 6 }

fsDot11sMeshPflEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh profile is enabled.
        'true': The mesh profile is enabled.
        'false': The mesh profile is disabled."
    DEFVAL      { false }
    ::= { fsDot11sMeshPflEntry 7 }

fsDot11sMeshPflRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { fsDot11sMeshPflEntry 8 }

fsDot11sMeshAKMMode OBJECT-TYPE
    SYNTAX      FsDot11AKMType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the authentication and key management mode defined by 802.11s.
        The following values are supported:
        'none': No key management mode configured.
        'psk': pre-shared key authentication."
    DEFVAL      { none }
    ::= { fsDot11sMeshPflEntry 9 }

fsDot11sMeshSimpleKey OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Represents the simple key for SAE."
    ::= { fsDot11sMeshPflEntry 10 }

-- *****************************************************************************
-- * End of fsDot11sMeshPflTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMpPlcyTable Definition
-- *****************************************************************************
fsDot11sMpPlcyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMpPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MP policy.
        There is a default policy on system and its index is 1.
        The default policy cannot be deleted or modified.
        The MP policy cannot be deleted when it is applied to a radio."
    ::= { fsDot11sConfigGroup 3 }

fsDot11sMpPlcyEntry OBJECT-TYPE
    SYNTAX      FsDot11sMpPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of a MP policy."
    INDEX
        {
            fsDot11sMpPlcyIndex
        }
    ::= { fsDot11sMpPlcyTable 1 }

FsDot11sMpPlcyEntry ::= SEQUENCE
    {
        fsDot11sMpPlcyIndex          Integer32,
        fsDot11sMpPlcyName           OCTET STRING,
        fsDot11sMpPlcyInitEnable     TruthValue,
        fsDot11sMlspEnable           TruthValue,
        fsDot11sProbReqInterval      Integer32,
        fsDot11sRoleAuthEnable       TruthValue,
        fsDot11sLinkHoldRSSI         Integer32,
        fsDot11sLinkHoldTime         Integer32,
        fsDot11sSwitchMargin         Integer32,
        fsDot11sLinkSaturationRSSI   Integer32,
        fsDot11sLinkRateMode         INTEGER,
        fsDot11sMaxLinkNum           Integer32,
        fsDot11sMpPlcyRowStatus      RowStatus,
        fsDot11sMlspMode             INTEGER,
        fsDot11sWaveGuideHoldRSSI    Integer32,
        fsDot11sWaveGuideSwitch      TruthValue,
        fsDot11sOptimizeEnable       TruthValue,
        fsDot11sOptimizeThreshold    Integer32,
        fsDot11sMlspLogEnable        TruthValue,
        fsDot11sMlspLogInterval      Integer32,
        fsDot11sActiveKeepaliveCount Integer32,
        fsDot11sLinkEstaThreshold    Integer32,
        fsDot11sTransmissionMethod   INTEGER,
        fsDot11sTransmitLevel        Integer32,
        fsDot11sTempLinkEnable       TruthValue
    }

fsDot11sMpPlcyIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy index."
    ::= { fsDot11sMpPlcyEntry 1 }

fsDot11sMpPlcyName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy name.
        MP policy cannot be created with the name of the
        default policy.
        Modification is not supported."
    ::= { fsDot11sMpPlcyEntry 2 }

fsDot11sMpPlcyInitEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the link initiation for
        the MP policy is enabled.
        'true': The link initiation for the MP policy is enabled.
        'false': The link initiation for the MP policy is disabled."
    DEFVAL      { true }
    ::= { fsDot11sMpPlcyEntry 3 }

fsDot11sMlspEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        is enabled.
        'true': MLSP is enabled.
        'false': MLSP is disabled."
    DEFVAL      { false }
    ::= { fsDot11sMpPlcyEntry 4 }

fsDot11sProbReqInterval OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the probe request interval."
    ::= { fsDot11sMpPlcyEntry 5 }

fsDot11sRoleAuthEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the device can play as the role
        of an authenticator."
    DEFVAL      { true }
    ::= { fsDot11sMpPlcyEntry 6 }

fsDot11sLinkHoldRSSI OBJECT-TYPE
    SYNTAX      Integer32(5..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold
        receive signal strength indicator (RSSI)."
    ::= { fsDot11sMpPlcyEntry 7 }

fsDot11sLinkHoldTime OBJECT-TYPE
    SYNTAX      Integer32(1000..20000)
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold time."
    ::= { fsDot11sMpPlcyEntry 8 }

fsDot11sSwitchMargin OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-switch margin."
    ::= { fsDot11sMpPlcyEntry 9 }

fsDot11sLinkSaturationRSSI OBJECT-TYPE
    SYNTAX      Integer32(30..150)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link saturation
        receive signal strength indicator (RSSI)."
    ::= { fsDot11sMpPlcyEntry 10 }

fsDot11sLinkRateMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
            fixed(1),
            realtime(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the rate mode of the mesh link."
    DEFVAL      { fixed }
    ::= { fsDot11sMpPlcyEntry 11 }

fsDot11sMaxLinkNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the maximum number of the mesh link."
    ::= { fsDot11sMpPlcyEntry 12 }

fsDot11sMpPlcyRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { fsDot11sMpPlcyEntry 13 }

fsDot11sMlspMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
            normal(0),
            satble(1)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP mode."
    DEFVAL      { normal }
    ::= { fsDot11sMpPlcyEntry 14 }

fsDot11sWaveGuideHoldRSSI OBJECT-TYPE
    SYNTAX      Integer32(5..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the link-hold
        receive signal strength indicator (RSSI) of wave guides."
    DEFVAL      { 15 }
    ::= { fsDot11sMpPlcyEntry 15 }

fsDot11sWaveGuideSwitch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the wave-guide switch state."
    DEFVAL      { false }
    ::= { fsDot11sMpPlcyEntry 16 }

fsDot11sOptimizeEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        optimization function is enabled."
    DEFVAL      { false }
    ::= { fsDot11sMpPlcyEntry 17 }

fsDot11sOptimizeThreshold OBJECT-TYPE
    SYNTAX      Integer32(15..80)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        optimization threshold."
    DEFVAL      { 30 }
    ::= { fsDot11sMpPlcyEntry 18 }

fsDot11sMlspLogEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether the mesh link switch protocol (MLSP)
        link switch logging function is enabled."
    DEFVAL      { false }
    ::= { fsDot11sMpPlcyEntry 19 }

fsDot11sMlspLogInterval OBJECT-TYPE
    SYNTAX      Integer32(500..4000)
    UNITS       "millisecond"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        link switch logging interval."
    DEFVAL      { 1000 }
    ::= { fsDot11sMpPlcyEntry 20 }

fsDot11sActiveKeepaliveCount OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link switch protocol (MLSP)
        active link keepalive packet limit."
    DEFVAL      { 6 }
    ::= { fsDot11sMpPlcyEntry 21 }

fsDot11sLinkEstaThreshold OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    UNITS       "dBm"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the mesh link establishment threshold."
    DEFVAL      { 5 }
    ::= { fsDot11sMpPlcyEntry 22 }

fsDot11sTransmissionMethod OBJECT-TYPE
    SYNTAX      INTEGER
        {
            air(0),
            waveGuide(1)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the method for mesh link signal transmission."
    DEFVAL      { air }
    ::= { fsDot11sMpPlcyEntry 23 }

fsDot11sTransmitLevel OBJECT-TYPE
    SYNTAX      Integer32(0..4)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the active mesh link keepalive packet transmission level."
    DEFVAL      { 0 }
    ::= { fsDot11sMpPlcyEntry 24 }

fsDot11sTempLinkEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates whether to allow temporary mesh link establishment."
    DEFVAL      { true }
    ::= { fsDot11sMpPlcyEntry 25 }

-- *****************************************************************************
-- * End of fsDot11sMpPlcyTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMlspCfgTable Definition
-- *****************************************************************************
fsDot11sMlspCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMlspCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MLSP proxy MAC address.
        Only if the specified MP policy is modifiable and the MLSP
        is enabled, the row of this table can be created and deleted.
        The row of this table cannot be modified."
    ::= { fsDot11sConfigGroup 4 }

fsDot11sMlspCfgEntry OBJECT-TYPE
    SYNTAX      FsDot11sMlspCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of MLSP proxy MAC address."
    INDEX
        {
            fsDot11sMpPlcyIndex,
            fsDot11sMlspProxyIndex
        }
    ::= { fsDot11sMlspCfgTable 1 }

FsDot11sMlspCfgEntry ::= SEQUENCE
    {
        fsDot11sMlspProxyIndex       Integer32,
        fsDot11sMlspProxyMac         MacAddress,
        fsDot11sMlspRowStatus        RowStatus
    }

fsDot11sMlspProxyIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address index."
    ::= { fsDot11sMlspCfgEntry 1 }

fsDot11sMlspProxyMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address."
    ::= { fsDot11sMlspCfgEntry 2 }

fsDot11sMlspRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { fsDot11sMlspCfgEntry 3 }

-- *****************************************************************************
-- * End of fsDot11sMlspCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sRadioCfgTable Definition
-- *****************************************************************************
fsDot11sRadioCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sRadioCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh to the specified radio."
    ::= { fsDot11sConfigGroup 5 }

fsDot11sRadioCfgEntry OBJECT-TYPE
    SYNTAX      FsDot11sRadioCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains mesh configure information
        of the specified radio."
    INDEX
        {
            fsDot11sCfgRadioIndex
        }
    ::= { fsDot11sRadioCfgTable 1 }

FsDot11sRadioCfgEntry ::= SEQUENCE
    {
        fsDot11sCfgRadioIndex        FsDot11RadioElementIndex,
        fsDot11sMeshPflMap           Integer32,
        fsDot11sMpPlcyMap            Integer32,
        fsDot11sBindInterface        Integer32
    }

fsDot11sCfgRadioIndex OBJECT-TYPE
    SYNTAX      FsDot11RadioElementIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents index of the radio."
    ::= { fsDot11sRadioCfgEntry 1 }

fsDot11sMeshPflMap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the number of the mesh profile mapped to
        the specified radio.  The value is zero when the radio is not
        bound to a mesh profile."
    DEFVAL      { 0 }
    ::= { fsDot11sRadioCfgEntry 2 }

fsDot11sMpPlcyMap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the index of the MP policy mapped to the
        specified radio.  The MP policy is the default policy when the radio
        is not bound to the user-defined MP policy.
        The index of the default policy is 1.
        This object cannot be modified when the radio is enabled."
    DEFVAL      { 1 }
    ::= { fsDot11sRadioCfgEntry 3 }

fsDot11sBindInterface OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the number of the WLAN-Mesh interface
        mapped to the specified radio.  The value is -1 when the
        radio is not bound to a WLAN-Mesh interface."
    DEFVAL      { -1 }
    ::= { fsDot11sRadioCfgEntry 4 }

-- *****************************************************************************
-- * End of fsDot11sRadioCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sAPCfgTable Definition
-- *****************************************************************************
fsDot11sAPCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sAPCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure mesh to the specified AP."
    ::= { fsDot11sConfigGroup 6 }

fsDot11sAPCfgEntry OBJECT-TYPE
    SYNTAX      FsDot11sAPCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains mesh configure information
        of the specified AP."
    INDEX
        {
            fsDot11APElementIndex
        }
    ::= { fsDot11sAPCfgTable 1 }

FsDot11sAPCfgEntry ::= SEQUENCE
    {
        fsDot11sPortalEnable         TruthValue
    }

fsDot11sPortalEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether the portal service is enabled.
        'true': The portal service is enabled.
        'false': The portal service is disabled."
    DEFVAL      { false }
    ::= { fsDot11sAPCfgEntry 1 }

-- *****************************************************************************
-- * End of fsDot11sAPCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sWDSPeerMacTable Definition
-- *****************************************************************************
fsDot11sWDSPeerMacTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sWDSPeerMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure wireless distribution system (WDS).
        The row of this table cannot be modified."
    ::= { fsDot11sWDSConfigGroup 1 }

fsDot11sWDSPeerMacEntry OBJECT-TYPE
    SYNTAX      FsDot11sWDSPeerMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains information of WDS."
    INDEX
        {
            fsDot11sCfgRadioIndex,
            fsDot11sWDSPeerMacIndex
        }
    ::= { fsDot11sWDSPeerMacTable 1 }

FsDot11sWDSPeerMacEntry ::= SEQUENCE
    {
        fsDot11sWDSPeerMacIndex      Integer32,
        fsDot11sWDSPeerMacAddrss     MacAddress,
        fsDot11sWDSPeerMacRowStatus  RowStatus
    }

fsDot11sWDSPeerMacIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address index."
    ::= { fsDot11sWDSPeerMacEntry 1 }

fsDot11sWDSPeerMacAddrss OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address."
    ::= { fsDot11sWDSPeerMacEntry 2 }

fsDot11sWDSPeerMacRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { fsDot11sWDSPeerMacEntry 3 }

-- *****************************************************************************
-- * End of fsDot11sWDSPeerMacTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMlspExtCfgTable Definition
-- *****************************************************************************
fsDot11sMlspExtCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMlspExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to configure MLSP proxy MAC address.
        Only if the specified MP policy is modifiable and MLSP
        is enabled, the row of this table can be created and deleted.
        The row of this table cannot be modified."
    ::= { fsDot11sConfigGroup 7 }

fsDot11sMlspExtCfgEntry OBJECT-TYPE
    SYNTAX      FsDot11sMlspExtCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains MLSP proxy MAC address infomation."
    INDEX
        {
            fsDot11sMlspExtPolicyName,
            fsDot11sMlspExtProxyMac,
            fsDot11sMlspExtProxyVlanID
        }
    ::= { fsDot11sMlspExtCfgTable 1 }

FsDot11sMlspExtCfgEntry ::= SEQUENCE
    {
            fsDot11sMlspExtPolicyName       OCTET STRING,
            fsDot11sMlspExtProxyMac         MacAddress,
            fsDot11sMlspExtProxyVlanID      Integer32,
            fsDot11sMlspExtProxyIP          IpAddress,
            fsDot11sMlspExtRowStatus        RowStatus
    }
fsDot11sMlspExtPolicyName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..31))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MP policy name.
        An MP policy cannot be created with the name of the
        default policy.
        Modification is not supported."
    ::= { fsDot11sMlspExtCfgEntry 1 }

fsDot11sMlspExtProxyMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy MAC address."
    ::= { fsDot11sMlspExtCfgEntry 2 }


fsDot11sMlspExtProxyVlanID OBJECT-TYPE
    SYNTAX      Integer32(1..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy VLAN ID."
    ::= { fsDot11sMlspExtCfgEntry 3 }

fsDot11sMlspExtProxyIP OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object represents the MLSP proxy IP address."
    ::= { fsDot11sMlspExtCfgEntry 4 }

fsDot11sMlspExtRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this table entry."
    ::= { fsDot11sMlspExtCfgEntry 5 }

-- *****************************************************************************
-- * End of fsDot11sMlspExtCfgTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMeshLinkStatusTable Definition
-- *****************************************************************************
fsDot11sMeshLinkStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMeshLinkStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to represent the status of mesh link."
    ::= { fsDot11sMeshStatusGroup 1 }

fsDot11sMeshLinkStatusEntry OBJECT-TYPE
    SYNTAX      FsDot11sMeshLinkStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains status information of mesh link."
    INDEX
        {
            fsDot11sMeshLinkIfIndex
        }
    ::= { fsDot11sMeshLinkStatusTable 1 }

FsDot11sMeshLinkStatusEntry ::= SEQUENCE
    {
        fsDot11sMeshLinkIfIndex        Unsigned32,
        fsDot11sMeshLinkName           OCTET STRING,
        fsDot11sMeshLinkBSSID          MacAddress,
        fsDot11sMeshLinkPeerMac        MacAddress,
        fsDot11sMeshLinkExistDuration  Integer32,
        fsDot11sMeshLinkType           INTEGER,
        fsDot11sMeshLinkSNR            Integer32,
        fsDot11sMeshLinkNoise          Integer32,
        fsDot11sMeshLinkPeerSNR        Integer32,
        fsDot11sMeshLinkPeerNoise      Integer32,
        fsDot11sMeshLinkPeerIPAddress  IpAddress,
        fsDot11sMeshLinkPeerSystemName OCTET STRING
    }

fsDot11sMeshLinkIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the interface index of the mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 1 }

fsDot11sMeshLinkName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the name of the mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 2 }

fsDot11sMeshLinkBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the BSS ID of the mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 3 }

fsDot11sMeshLinkPeerMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the peer MAC address of the mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 4 }

fsDot11sMeshLinkExistDuration OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the time for which the link has been up."
    ::= { fsDot11sMeshLinkStatusEntry 5 }

fsDot11sMeshLinkType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            active(1),
            dormant(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the type for the link."
    ::= { fsDot11sMeshLinkStatusEntry 6 }

fsDot11sMeshLinkSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR for the link."
    ::= { fsDot11sMeshLinkStatusEntry 7 }

fsDot11sMeshLinkNoise OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the noise for the link."
    ::= { fsDot11sMeshLinkStatusEntry 8 }

fsDot11sMeshLinkPeerSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR transferred from the neighbor of this mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 9 }

fsDot11sMeshLinkPeerNoise OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the noise transferred from the neighbor of this mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 10 }

fsDot11sMeshLinkPeerIPAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the IP address of the neighbor of this mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 11 }

fsDot11sMeshLinkPeerSystemName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the system name of the neighbor of this mesh link."
    ::= { fsDot11sMeshLinkStatusEntry 12 }

-- *****************************************************************************
-- * End of fsDot11sMeshLinkStatusTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  fsDot11sMeshLinkStatisTable Definition
-- *****************************************************************************
fsDot11sMeshLinkStatisTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMeshLinkStatisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to represent the statistical information of
         mesh link."
    ::= { fsDot11sMeshStatusGroup 2 }

fsDot11sMeshLinkStatisEntry OBJECT-TYPE
    SYNTAX      FsDot11sMeshLinkStatisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains statistical information of mesh link."
    INDEX
        {
            fsDot11APElementIndex,
            fsDot11sMeshLinkStatIfIndex
        }
    ::= { fsDot11sMeshLinkStatisTable 1 }

FsDot11sMeshLinkStatisEntry ::= SEQUENCE
    {
        fsDot11sMeshLinkStatIfIndex    Unsigned32,
        fsDot11sMeshLinkNbrIndex       Unsigned32,
        fsDot11sMeshLinkRxTotByte      Counter32,
        fsDot11sMeshLinkRxTotPkt       Counter32,
        fsDot11sMeshLinkRxUniPkt       Counter32,
        fsDot11sMeshLinkRxBrocPkt      Counter32,
        fsDot11sMeshLinkRxMuticPkt     Counter32,
        fsDot11sMeshLinkRxDiscPkt      Counter32,
        fsDot11sMeshLinkTxTotByte      Counter32,
        fsDot11sMeshLinkTxTotPkt       Counter32,
        fsDot11sMeshLinkTxUniPkt       Counter32,
        fsDot11sMeshLinkTxBrocPkt      Counter32,
        fsDot11sMeshLinkTxMuticPkt     Counter32,
        fsDot11sMeshLinkTxDiscPkt      Counter32,
        fsDot11sMeshLinkIFName         OCTET STRING
    }

fsDot11sMeshLinkStatIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the interface index of the mesh link."
    ::= { fsDot11sMeshLinkStatisEntry 1 }

fsDot11sMeshLinkNbrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the neighbor index of the mesh link."
    ::= { fsDot11sMeshLinkStatisEntry 2 }

fsDot11sMeshLinkRxTotByte OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of bytes that the mesh link received."
    ::= { fsDot11sMeshLinkStatisEntry 3 }

fsDot11sMeshLinkRxTotPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of packets that the mesh link received."
    ::= { fsDot11sMeshLinkStatisEntry 4 }

fsDot11sMeshLinkRxUniPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of unicast packets that the mesh link received."
    ::= { fsDot11sMeshLinkStatisEntry 5 }

fsDot11sMeshLinkRxBrocPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of broadcast packets that the mesh link
         received."
    ::= { fsDot11sMeshLinkStatisEntry 6 }

fsDot11sMeshLinkRxMuticPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of multicast packets that the mesh link
         received."
    ::= { fsDot11sMeshLinkStatisEntry 7 }

fsDot11sMeshLinkRxDiscPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of packets that the mesh link discarded."
    ::= { fsDot11sMeshLinkStatisEntry 8 }

fsDot11sMeshLinkTxTotByte OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the total amount of bytes that the mesh link transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 9 }

fsDot11sMeshLinkTxTotPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the total amount of packets that the mesh link transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 10 }

fsDot11sMeshLinkTxUniPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of unicast packets that the mesh link
         transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 11 }

fsDot11sMeshLinkTxBrocPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of broadcast packets that the mesh link
         transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 12 }

fsDot11sMeshLinkTxMuticPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of multicast packets that the mesh link
         transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 13 }

fsDot11sMeshLinkTxDiscPkt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the amount of discarded packets that the mesh link
         transmitted."
    ::= { fsDot11sMeshLinkStatisEntry 14 }

fsDot11sMeshLinkIFName    OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the name of mesh link interface."
    ::= { fsDot11sMeshLinkStatisEntry 15 }

-- *****************************************************************************
-- * End of fsDot11sMeshLinkStatisTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  fsDot11sMeshNbrStatusTable Definition
-- *****************************************************************************
fsDot11sMeshNbrStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsDot11sMeshNbrStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table represents the status information for the neighbors of MP."
    ::= { fsDot11sMeshStatusGroup 3 }

fsDot11sMeshNbrStatusEntry OBJECT-TYPE
    SYNTAX      FsDot11sMeshNbrStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry of the table will provide status information for the
         neighbors of MP."
    INDEX
        {
            fsDot11APElementIndex,
            fsDot11sMeshNbrIndex
        }
    ::= { fsDot11sMeshNbrStatusTable 1 }

FsDot11sMeshNbrStatusEntry ::= SEQUENCE
    {
        fsDot11sMeshNbrIndex          Unsigned32,
        fsDot11sMeshNbrRadioID        Unsigned32,
        fsDot11sMeshLocalMeshID       OCTET STRING,
        fsDot11sMeshNbrMeshID         OCTET STRING,
        fsDot11sMeshNbrBSSID          MacAddress,
        fsDot11sMeshNbrPeerMac        MacAddress,
        fsDot11sMeshLinkInMp          Unsigned32,
        fsDot11sMeshMPLinkStatus      INTEGER,
        fsDot11sMeshNbrChannel        Unsigned32,
        fsDot11sMeshNbrLinkDuration   Integer32,
        fsDot11sMeshNbrRSSI           Integer32,
        fsDot11sMeshNbrSNR            Integer32
    }

fsDot11sMeshNbrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Represents the index for the neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 1 }

fsDot11sMeshNbrRadioID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the radio ID of the neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 2 }

fsDot11sMeshLocalMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the local mesh ID."
    ::= { fsDot11sMeshNbrStatusEntry 3 }

fsDot11sMeshNbrMeshID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the mesh ID of the neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 4 }

fsDot11sMeshNbrBSSID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the BSS ID of the neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 5 }

fsDot11sMeshNbrPeerMac OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of the peer neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 6 }

fsDot11sMeshLinkInMp OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the interface index of mesh link that used to connect with
         this neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 7 }

fsDot11sMeshMPLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER
        {
            processing(1),
            up(2),
            down(3)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the status of mesh link that used to connect with this
         neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 8 }

fsDot11sMeshNbrChannel OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the channel number used by this neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 9 }

fsDot11sMeshNbrLinkDuration OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the duration of mesh link that used to connect with this
         neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 10 }

fsDot11sMeshNbrRSSI OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the RSSI of mesh link that used to connect with this
         neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 11 }

fsDot11sMeshNbrSNR OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the SNR of mesh link that used to connect with this
         neighbor."
    ::= { fsDot11sMeshNbrStatusEntry 12 }

-- *****************************************************************************
-- *  End of fsDot11sMeshNbrStatusTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- *  fsDot11sMeshLinkTraps Definition
-- *****************************************************************************

fsDot11sMeshLinkTraps OBJECT IDENTIFIER ::= { fsDot11sMeshLinkNotifyGroup 0 }

fsDot11sMeshLinkSwitchTrap NOTIFICATION-TYPE
    OBJECTS
        {
            fsDot11sMeshLinkBSSIDMAC,
            fsDot11sMeshLinkPeerMAC
        }
    STATUS        current
    DESCRIPTION
        "This notification is to indicate the occurrence of a mesh link switchover."
    ::= { fsDot11sMeshLinkTraps 1 }

fsDot11sMeshLinkTrapObjects OBJECT IDENTIFIER ::= { fsDot11sMeshLinkNotifyGroup 1 }

fsDot11sMeshLinkBSSIDMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the BSSID of the MP."
    ::= { fsDot11sMeshLinkTrapObjects 1 }

fsDot11sMeshLinkPeerMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the MAC address of the peer MP after mesh link switchover."
    ::= { fsDot11sMeshLinkTrapObjects 2 }
END