-- ============================================================================= -- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved. -- -- Description:Multiprotocol Label Switching Label Distribution Protocol MIB -- Reference: -- Version: V1.8 -- History: -- VERSION AUTHOR/ Change Description -- OLD/NEW DATE -- -- #/1.1 Lingesh M + Initial create. -- 27/08/99 -- #/1.2 27/09/99 + Replaced the MIB objects -- - fsMplsLdpLsrMaxIngressCrlspTnls -- - fsMplsLdpLsrMaxInbetwnCrlspTnls -- with fsMplsLdpLsrMaxCrlspTnls -- 1.2/1.3 19/10/99 + Added fsMplsLdpPeerType in Peer Table. -- 04/10/99 + Added fsMplsLdpEntityIfTable. -- 1.3/1.4 23/11/99 + Added MIB object for Hello Hold Time in Entity -- Table, modified Cr-lsp Tnl index of type -- read-create to not-accessible. -- + Removed fsMplsLdpSessionRowStatus mib-object. -- -- 1.1 03/01/2k + MPLS Release 1.0.0.0 -- Naren -- -- 1.2 27/01/2k + Modified for MPLS Implementation -- Naren Following objects are added in the Incarnation table -- fsMplsLdpLsrMaxVcmCapability -- fsMplsLdpLsrVcmPathVecInAllLblMapPresent -- fsMplsLdpLsrRequestRetrytimerValue -- fsMplsLdpLsrNumOfRequestRetryAttempts -- Following Notifications are added -- fsMplsLdpIncarnUpEventFailure -- fsMplsLdpIncarnDownEventFailure -- fsMplsLdpEntityUpEventFailure -- fsMplsLdpEntityDownEventFailure -- -- 1.3 03/04/2k + Changed FS related identification to fs -- David related identification. -- 1.4 03/14/2003 add fsMplsLdpSessionUpEventFailure and fsMplsLdpSessionDownEventFailure -- V1.5 2004-10-12 updated by gaolong -- Change SYNTAX clause value from INTEGER to Unsigned because the value range is (1..4294967295). -- Change MAX-ACCESS clause value of fsMplsLdpCrlspTnlIndex to accessible-for-notify -- because this index node is used when sending notification. -- V1.6 2004-11-5 updated by liuxiaolong -- Change DEFVAL clause value of fsMplsLdpLsrHopCountLimit to 32. -- V1.7 2022-08-11 Modified by Zhou wan, Modified fsMplsLdpNotifications -- V1.8 2023-11-14 Modified by Zhou wan, Modified fsMplsLdpNotifications -- ==================================================================================== -- -- Full Copyright Notice of the MIB that was extracted from Draft-ietf-mpls-ldp-mib-01 as follows: -- --Copyright (C) The Internet Society (1999). All Rights Reserved. -- -- -- This document and translations of it may be copied and furnished to -- others, and derivative works that comment on or otherwise explain it -- or assist in its implementation may be prepared, copied, published -- and distributed, in whole or in part, without restriction of any -- kind, provided that the above copyright notice and this paragraph are -- included on all such copies and derivative works. However, this -- document itself may not be modified in any way, such as by removing -- the copyright notice or references to the Internet Society or other -- Internet organizations, except as needed for the purpose of -- developing Internet standards in which case the procedures for -- copyrights defined in the Internet Standards process must be -- followed, or as required to translate it into languages other than -- English. -- -- The limited permissions granted above are perpetual and will not be -- revoked by the Internet Society or its successors or assigns. -- -- This document and the information contained herein is provided on an -- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING -- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION -- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF -- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. -- -- MPLS Label Distribution Protocol MIB Definitions FS-MPLS-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS fsMpls FROM FS-OID-MIB OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Counter32, Unsigned32,IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, TimeInterval FROM SNMPv2-TC; fsMplsLdp MODULE-IDENTITY LAST-UPDATED "202311141100Z" -- Nov 14, 2023 at 11:00 GMT ORGANIZATION "Fiberstore Co.,Limited" CONTACT-INFO "" DESCRIPTION "All rights reserved" REVISION "202311141100Z" -- Nov 14, 2023 at 11:00 GMT DESCRIPTION "Modified fsMplsLdpNotifications." REVISION "202208111100Z" -- August 11, 2022 at 11:00 GMT DESCRIPTION "Modified fsMplsLdpNotifications." REVISION "9611082155Z" DESCRIPTION "The MIB for MPLS LDP module. This MIB has been derived from the MPLS Working group LDP MIB and MPLS Working group TE MIB ." ::= { fsMpls 2 } --******************************************************************** -- MPLS LDP Textual Conventions --******************************************************************** -- DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- (SIZE (0..255)) PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. BitRate ::= INTEGER BurstSize ::= INTEGER MplsLsrIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Label Switch Router (LSR) identifier is the first 4 bytes or the IP Address component of the Label Distribution Protocol (LDP) identifier." SYNTAX OCTET STRING (SIZE (4)) MplsLdpGenAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of an network layer or data link layer address." SYNTAX OCTET STRING (SIZE (0..64)) MplsLdpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR." SYNTAX OCTET STRING (SIZE (6)) AtmVpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB." SYNTAX INTEGER (0..4095) AtmVcIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB." SYNTAX INTEGER (0..65535) AddressFamilyNumbers ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An address family. Values are defined in RFC 1700 - Assigned Numbers. All values may not be relevant in all contexts when used in this MIB, but are included for completeness." REFERENCE "RFC 1700 Assigned Numbers, Reynolds and Postel, Oct. 1994" SYNTAX INTEGER { other(0), ipv4(1), ipv6(2), nsap(3), hdlc(4), bbn1822(5), ieee802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164WithNsap(15) } MplsLabel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the label carried in the MPLS shim header is 20 bits wide and the top 12 bits must be zero. The frame relay label can be either 10, 17 or 23 bits wide depending on the size of the DLCI field size and the top 22, 15, or 9 bits must be zero, respectively. For an ATM interface, the lowermost 16 bits are interpreted as the VCI, the next 8 bits as the VPI and the remaining bits must be zero. Also note the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the datapath." REFERENCE "1. MPLS Label Stack Encoding, Rosen et al, draft- ietf-mpls-label-encaps-04.txt, April 1999. 2. Use of Label Switching on Frame Relay Networks, Conta et al, draft-ietf-mpls-fr-03.txt, Nov. 1998." SYNTAX INTEGER MplsTunnelIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Index into mplsTunnelTable." SYNTAX INTEGER (0..65535) fsMplsLdpObjects OBJECT IDENTIFIER ::= { fsMplsLdp 1 } fsMplsLdpNotifications OBJECT IDENTIFIER ::= { fsMplsLdp 2 } fsMplsLdpScalarGroup OBJECT IDENTIFIER ::= { fsMplsLdp 3 } --**************************************************************** -- MPLS LDP Objects --**************************************************************** fsMplsLdpLsrObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 1 } fsMplsLdpEntityObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 2 } fsMplsLdpPeerObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 3 } fsMplsLdpSessionObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 4 } fsMplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 5 } fsMplsLdpCrlspTnlObjects OBJECT IDENTIFIER ::= { fsMplsLdpObjects 6 } -- -- The MPLS Label Distribution Protocol Label Switch Router Objects -- fsMplsLdpLsrIncarnTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpLsrIncarnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation." ::= { fsMplsLdpLsrObjects 1 } fsMplsLdpLsrIncarnEntry OBJECT-TYPE SYNTAX FsMplsLdpLsrIncarnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier." INDEX { fsMplsLdpLsrIncarnID } ::= { fsMplsLdpLsrIncarnTable 1 } FsMplsLdpLsrIncarnEntry ::= SEQUENCE { fsMplsLdpLsrID MplsLsrIdentifier, fsMplsLdpLsrLoopDetectionPresent TruthValue, fsMplsLdpLsrLoopDetectionAdminStatus INTEGER, fsMplsLdpLsrPathVectorLimit INTEGER, fsMplsLdpLsrHopCountLimit INTEGER, fsMplsLdpLsrLoopPreventionPresent TruthValue, fsMplsLdpLsrLoopPreventionAdminStatus INTEGER, fsMplsLdpLsrLabelRetentionMode INTEGER, fsMplsLdpLsrIncarnID INTEGER, fsMplsLdpLsrMaxLdpEntities INTEGER, fsMplsLdpLsrMaxLocalPeers INTEGER, fsMplsLdpLsrMaxRemotePeers INTEGER, fsMplsLdpLsrMaxIfaces INTEGER, fsMplsLdpLsrMaxLsps INTEGER, fsMplsLdpLsrMaxCrlspTnls INTEGER, fsMplsLdpLsrMaxErhopPerCrlspTnl INTEGER, fsMplsLdpLsrRowStatus RowStatus, fsMplsLdpLsrMaxVcmCapability INTEGER, fsMplsLdpLsrVcmPathVecInAllLblMapPresent TruthValue, fsMplsLdpLsrRequestRetrytimerValue INTEGER, fsMplsLdpLsrNumOfRequestRetryAttempts INTEGER } fsMplsLdpLsrID OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "The LSR's Identifier." ::= { fsMplsLdpLsrIncarnEntry 1 } fsMplsLdpLsrLoopDetectionPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection." DEFVAL { true } ::= { fsMplsLdpLsrIncarnEntry 2 } fsMplsLdpLsrLoopDetectionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'." DEFVAL { enabled } ::= { fsMplsLdpLsrIncarnEntry 3 } fsMplsLdpLsrPathVectorLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object only has meaning if fsMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop." DEFVAL { 32 } ::= { fsMplsLdpLsrIncarnEntry 4 } fsMplsLdpLsrHopCountLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object only has meaning if fsMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop." DEFVAL { 32 } ::= { fsMplsLdpLsrIncarnEntry 5 } fsMplsLdpLsrLoopPreventionPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of MPLS does not provide support to assign this MIB object with a value 'true'." DEFVAL { false } ::= { fsMplsLdpLsrIncarnEntry 6 } fsMplsLdpLsrLoopPreventionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to assign this MIB object with a value 'enabled'." DEFVAL { disabled } ::= { fsMplsLdpLsrIncarnEntry 7 } fsMplsLdpLsrLabelRetentionMode OBJECT-TYPE SYNTAX INTEGER { conservative(1), liberal(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of MPLS does not provide support to assign this MIB object with a value 'liberal'." DEFVAL { conservative } ::= { fsMplsLdpLsrIncarnEntry 8 } fsMplsLdpLsrIncarnID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The incarnation acts as index to all the elements in this table." ::= { fsMplsLdpLsrIncarnEntry 9 } fsMplsLdpLsrMaxLdpEntities OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of LDP entities that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 10 } fsMplsLdpLsrMaxLocalPeers OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Local LDP peers that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 11 } fsMplsLdpLsrMaxRemotePeers OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Remote LDP peers that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 12 } fsMplsLdpLsrMaxIfaces OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Label enabled Interfaces that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 13 } fsMplsLdpLsrMaxLsps OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of Label Switched Paths that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 14 } fsMplsLdpLsrMaxCrlspTnls OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of CRLSPs that can be supported by this Incarnation." ::= { fsMplsLdpLsrIncarnEntry 15 } fsMplsLdpLsrMaxErhopPerCrlspTnl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " The maximum number of ER-Hops that can be supported in a CRLSP tunnel." ::= { fsMplsLdpLsrIncarnEntry 16 } fsMplsLdpLsrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { fsMplsLdpLsrIncarnEntry 17 } fsMplsLdpLsrMaxVcmCapability OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { fsMplsLdpLsrIncarnEntry 18 } fsMplsLdpLsrVcmPathVecInAllLblMapPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { fsMplsLdpLsrIncarnEntry 19 } fsMplsLdpLsrRequestRetrytimerValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { fsMplsLdpLsrIncarnEntry 20 } fsMplsLdpLsrNumOfRequestRetryAttempts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { fsMplsLdpLsrIncarnEntry 21 } -- -- The MPLS Label Distribution Protocol Entity Table -- fsMplsLdpEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR)." ::= { fsMplsLdpEntityObjects 1 } fsMplsLdpEntityEntry OBJECT-TYPE SYNTAX FsMplsLdpEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex } ::= { fsMplsLdpEntityTable 1 } FsMplsLdpEntityEntry ::= SEQUENCE { fsMplsLdpEntityID MplsLdpIdentifier, fsMplsLdpEntityLabelSpaceType INTEGER, fsMplsLdpEntityDefVpi AtmVpIdentifier, fsMplsLdpEntityDefVci AtmVcIdentifier, fsMplsLdpEntityUnlabTrafVpi AtmVpIdentifier, fsMplsLdpEntityUnlabTrafVci AtmVcIdentifier, fsMplsLdpEntityMergeCapability INTEGER, fsMplsLdpEntityVcDirectionality INTEGER, fsMplsLdpEntityWellKnownDiscoveryPort INTEGER, fsMplsLdpEntityMtu INTEGER, fsMplsLdpEntityKeepAliveHoldTimer INTEGER, fsMplsLdpEntityFailedInitSessionThreshold INTEGER, fsMplsLdpEntityLabelDistributionMethod INTEGER, fsMplsLdpEntityLabelAllocationMethod INTEGER, fsMplsLdpEntityHelloHoldTimer INTEGER, fsMplsLdpEntityRowStatus RowStatus } fsMplsLdpEntityID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR." REFERENCE "LDP Specification, Section on LDP Identifiers." ::= { fsMplsLdpEntityEntry 1 } fsMplsLdpEntityLabelSpaceType OBJECT-TYPE SYNTAX INTEGER { unknown(1), perInterface(2), perPlatform(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform." REFERENCE "LDP Specification, Section on Label Spaces." ::= { fsMplsLdpEntityEntry 2 } fsMplsLdpEntityDefVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VPI value used in the label for the default VPI." ::= { fsMplsLdpEntityEntry 3 } fsMplsLdpEntityDefVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The Default VCI value used in the label for the default VCI." ::= { fsMplsLdpEntityEntry 4 } fsMplsLdpEntityUnlabTrafVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "VPI value of the VCC supporting unlabeled traffic." DEFVAL { 0 } ::= { fsMplsLdpEntityEntry 5 } fsMplsLdpEntityUnlabTrafVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "VCI value of the VCC supporting unlabeled traffic." DEFVAL { 32 } ::= { fsMplsLdpEntityEntry 6 } fsMplsLdpEntityMergeCapability OBJECT-TYPE SYNTAX INTEGER { noMerge(0), vpMerge(1), vcMerge(2), vpVcMerge(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge." REFERENCE "draft-ietf-mpls-ldp-04.txt, Section 3.5.3" ::= { fsMplsLdpEntityEntry 7 } fsMplsLdpEntityVcDirectionality OBJECT-TYPE SYNTAX INTEGER { bidirectional(1), unidirectional(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Sets the VC directionality for this LDP entity." REFERENCE "draft-ietf-mpls-ldp-04.txt, Section 3.5.3" ::= { fsMplsLdpEntityEntry 8 } fsMplsLdpEntityWellKnownDiscoveryPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The well known LDP Discovery Port." ::= { fsMplsLdpEntityEntry 9 } fsMplsLdpEntityMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum transmission unit (MTU) that was configured for this entity." ::= { fsMplsLdpEntityEntry 10 } fsMplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet value which is the proposed keep alive hold timer for this LDP Entity." ::= { fsMplsLdpEntityEntry 11 } fsMplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero)." ::= { fsMplsLdpEntityEntry 12 } fsMplsLdpEntityLabelDistributionMethod OBJECT-TYPE SYNTAX INTEGER { downstreamOnDemand(1), downstreamUnsolicited(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'." REFERENCE "draft-ietf-mpls-arch-04.txt [20]." ::= { fsMplsLdpEntityEntry 13 } fsMplsLdpEntityLabelAllocationMethod OBJECT-TYPE SYNTAX INTEGER { ordered(1), independent(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode." DEFVAL { ordered } ::= { fsMplsLdpEntityEntry 14 } fsMplsLdpEntityHelloHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet value which is the proposed hello hold timer for this LDP Entity." ::= { fsMplsLdpEntityEntry 15 } fsMplsLdpEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { fsMplsLdpEntityEntry 16 } -- -- The MPLS LDP Entity Interface Table -- fsMplsLdpEntityIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpEntityIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity." ::= { fsMplsLdpEntityObjects 2 } fsMplsLdpEntityIfEntry OBJECT-TYPE SYNTAX FsMplsLdpEntityIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex } ::= { fsMplsLdpEntityIfTable 1 } FsMplsLdpEntityIfEntry ::= SEQUENCE { fsMplsLdpEntityIfIndex Unsigned32, fsMplsLdpEntityIfIpv4Address IpAddress, fsMplsLdpEntityIfRowStatus RowStatus } fsMplsLdpEntityIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II" ::= { fsMplsLdpEntityIfEntry 1 } fsMplsLdpEntityIfIpv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address associated with the interface." ::= { fsMplsLdpEntityIfEntry 2 } fsMplsLdpEntityIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { fsMplsLdpEntityIfEntry 3 } -- -- The MPLS LDP Entity Configurable ATM Label Range Table -- fsMplsLdpEntityConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table." ::= { fsMplsLdpEntityObjects 3 } fsMplsLdpEntityConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX FsMplsLdpEntityConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex, fsMplsLdpEntityConfAtmLabelRangeLowerBoundVPI, fsMplsLdpEntityConfAtmLabelRangeLowerBoundVCI } ::= { fsMplsLdpEntityConfAtmLabelRangeTable 1 } FsMplsLdpEntityConfAtmLabelRangeEntry ::= SEQUENCE { fsMplsLdpEntityConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, fsMplsLdpEntityConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, fsMplsLdpEntityConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, fsMplsLdpEntityConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier, fsMplsLdpEntityConfAtmLabelRangeRowStatus RowStatus } fsMplsLdpEntityConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { fsMplsLdpEntityConfAtmLabelRangeEntry 1 } fsMplsLdpEntityConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { fsMplsLdpEntityConfAtmLabelRangeEntry 2 } fsMplsLdpEntityConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { fsMplsLdpEntityConfAtmLabelRangeEntry 3 } fsMplsLdpEntityConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { fsMplsLdpEntityConfAtmLabelRangeEntry 4 } fsMplsLdpEntityConfAtmLabelRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { fsMplsLdpEntityConfAtmLabelRangeEntry 5 } -- -- The MPLS LDP Entity Statistics Table -- fsMplsLdpEntityStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR." ::= { fsMplsLdpEntityObjects 4 } fsMplsLdpEntityStatsEntry OBJECT-TYPE SYNTAX FsMplsLdpEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table contains statistical information about an LDP Entity." AUGMENTS { fsMplsLdpEntityEntry } ::= { fsMplsLdpEntityStatsTable 1 } FsMplsLdpEntityStatsEntry ::= SEQUENCE { fsMplsLdpAttemptedSessions Counter32 } fsMplsLdpAttemptedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total attempted sessions for this LDP Entity." ::= { fsMplsLdpEntityStatsEntry 1 } -- -- The MPLS LDP Peer Table -- fsMplsLdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent." ::= { fsMplsLdpPeerObjects 1 } fsMplsLdpPeerEntry OBJECT-TYPE SYNTAX FsMplsLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single Peer." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex, fsMplsLdpPeerIndex } ::= { fsMplsLdpPeerTable 1 } FsMplsLdpPeerEntry ::= SEQUENCE { fsMplsLdpPeerIndex Unsigned32, fsMplsLdpPeerID MplsLdpIdentifier, fsMplsLdpPeerInternetworkAddrType AddressFamilyNumbers, fsMplsLdpPeerInternetworkAddr MplsLdpGenAddr, fsMplsLdpPeerDefaultMtu INTEGER, fsMplsLdpPeerKeepAliveHoldTimer INTEGER, fsMplsLdpPeerLabelDistributionMethod INTEGER, fsMplsLdpPeerType INTEGER, fsMplsLdpPeerRowStatus RowStatus } fsMplsLdpPeerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the LDP peer that is unique within the scope of this agent." ::= { fsMplsLdpPeerEntry 1 } fsMplsLdpPeerID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "The LDP identifier of this LDP Peer." ::= { fsMplsLdpPeerEntry 2 } fsMplsLdpPeerInternetworkAddrType OBJECT-TYPE SYNTAX AddressFamilyNumbers MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the internetwork layer address of this LDP peer. This object indicates how the value of fsMplsLdpPeerInternetworkAddr is to be interpreted." ::= { fsMplsLdpPeerEntry 3 } fsMplsLdpPeerInternetworkAddr OBJECT-TYPE SYNTAX MplsLdpGenAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the internetwork layer address of this LDP peer." ::= { fsMplsLdpPeerEntry 4 } fsMplsLdpPeerDefaultMtu OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The default maximum transmission unit (MTU) of the LDP Peer." DEFVAL { 9180 } ::= { fsMplsLdpPeerEntry 5 } fsMplsLdpPeerKeepAliveHoldTimer OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval." ::= { fsMplsLdpPeerEntry 6 } fsMplsLdpPeerLabelDistributionMethod OBJECT-TYPE SYNTAX INTEGER { downstreamOnDemand(1), downstreamUnsolicited(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "For any given LDP session, the method of label distribution must be specified." REFERENCE "draft-ietf-mpls-arch-05.txt [20]." ::= { fsMplsLdpPeerEntry 7 } fsMplsLdpPeerType OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether a peer is a local peer or a remote peer" ::= { fsMplsLdpPeerEntry 8 } fsMplsLdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created and deleted using the RowStatus convention." ::= { fsMplsLdpPeerEntry 9 } -- -- The MPLS LDP Peer Configurable ATM Label Range Table -- fsMplsLdpPeerConfAtmLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table." ::= { fsMplsLdpPeerObjects 2 } fsMplsLdpPeerConfAtmLabelRangeEntry OBJECT-TYPE SYNTAX FsMplsLdpPeerConfAtmLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex, fsMplsLdpPeerIndex, fsMplsLdpPeerConfAtmLabelRangeLowerBoundVPI, fsMplsLdpPeerConfAtmLabelRangeLowerBoundVCI } ::= { fsMplsLdpPeerConfAtmLabelRangeTable 1 } FsMplsLdpPeerConfAtmLabelRangeEntry ::= SEQUENCE { fsMplsLdpPeerConfAtmLabelRangeLowerBoundVPI AtmVpIdentifier, fsMplsLdpPeerConfAtmLabelRangeLowerBoundVCI AtmVcIdentifier, fsMplsLdpPeerConfAtmLabelRangeUpperBoundVPI AtmVpIdentifier, fsMplsLdpPeerConfAtmLabelRangeUpperBoundVCI AtmVcIdentifier } fsMplsLdpPeerConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VPI number configured for this range." ::= { fsMplsLdpPeerConfAtmLabelRangeEntry 1 } fsMplsLdpPeerConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The minimum VCI number configured for this range." ::= { fsMplsLdpPeerConfAtmLabelRangeEntry 2 } fsMplsLdpPeerConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VPI number configured for this range." ::= { fsMplsLdpPeerConfAtmLabelRangeEntry 3 } fsMplsLdpPeerConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VCI number configured for this range." ::= { fsMplsLdpPeerConfAtmLabelRangeEntry 4 } -- -- The MPLS LDP Sessions Table -- fsMplsLdpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Sessions between the LDP Entities and LDP Peers." ::= { fsMplsLdpSessionObjects 1 } fsMplsLdpSessionEntry OBJECT-TYPE SYNTAX FsMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents information on a single session between an LDP Entity and LDP Peer." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex, fsMplsLdpPeerIndex, fsMplsLdpSessionIndex } ::= { fsMplsLdpSessionTable 1 } FsMplsLdpSessionEntry ::= SEQUENCE { fsMplsLdpSessionIndex Unsigned32, fsMplsLdpSessionID MplsLdpIdentifier, fsMplsLdpSessionProtocolVersion INTEGER, fsMplsLdpSessionKeepAliveHoldTimeRemaining TimeInterval, fsMplsLdpSessionRole INTEGER, fsMplsLdpSessionState INTEGER, fsMplsLdpSessionAtmLabelRangeLowerBoundVPI AtmVpIdentifier, fsMplsLdpSessionAtmLabelRangeLowerBoundVCI AtmVcIdentifier, fsMplsLdpSessionAtmLabelRangeUpperBoundVPI AtmVpIdentifier, fsMplsLdpSessionAtmLabelRangeUpperBoundVCI AtmVcIdentifier } fsMplsLdpSessionIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique identifier for this entry such that it identifies a specific LDP Session." ::= { fsMplsLdpSessionEntry 1 } fsMplsLdpSessionID OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The LDP Session identifier." ::= { fsMplsLdpSessionEntry 2 } fsMplsLdpSessionProtocolVersion OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the LDP Protocol which this session is using." ::= { fsMplsLdpSessionEntry 3 } fsMplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The keep alive hold time remaining for this session." ::= { fsMplsLdpSessionEntry 4 } fsMplsLdpSessionRole OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role." ::= { fsMplsLdpSessionEntry 5 } fsMplsLdpSessionState OBJECT-TYPE SYNTAX INTEGER { nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior." ::= { fsMplsLdpSessionEntry 6 } fsMplsLdpSessionAtmLabelRangeLowerBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VPI number for this range." ::= { fsMplsLdpSessionEntry 7 } fsMplsLdpSessionAtmLabelRangeLowerBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum VCI number for this range." ::= { fsMplsLdpSessionEntry 8 } fsMplsLdpSessionAtmLabelRangeUpperBoundVPI OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VPI number for this range." ::= { fsMplsLdpSessionEntry 9 } fsMplsLdpSessionAtmLabelRangeUpperBoundVCI OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum VCI number for this range." ::= { fsMplsLdpSessionEntry 10 } -- -- The MPLS LDP Hello Adjacency Table -- fsMplsLdpHelloAdjacencyTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Hello Adjacencies for Sessions." ::= { fsMplsLdpHelloAdjacencyObjects 1 } fsMplsLdpHelloAdjacencyEntry OBJECT-TYPE SYNTAX FsMplsLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpEntityIfIndex, fsMplsLdpPeerIndex, fsMplsLdpSessionIndex, fsMplsLdpHelloAdjacencyIndex } ::= { fsMplsLdpHelloAdjacencyTable 1 } FsMplsLdpHelloAdjacencyEntry ::= SEQUENCE { fsMplsLdpHelloAdjacencyIndex Unsigned32, fsMplsLdpHelloAdjacencyHoldTimeRemaining TimeInterval } fsMplsLdpHelloAdjacencyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for the adjacency." ::= { fsMplsLdpHelloAdjacencyEntry 1 } fsMplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining for this Hello Adjacency." ::= { fsMplsLdpHelloAdjacencyEntry 2 } -- -- FSMPLS- CRLSP Table -- fsMplsLdpCrlspTnlTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpCrlspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fsMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the fsMplsLdpCrlspErHopTable." ::= { fsMplsLdpCrlspTnlObjects 1 } fsMplsLdpCrlspTnlEntry OBJECT-TYPE SYNTAX FsMplsLdpCrlspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpCrlspTnlIndex } ::= { fsMplsLdpCrlspTnlTable 1 } FsMplsLdpCrlspTnlEntry ::= SEQUENCE { fsMplsLdpCrlspTnlIndex MplsTunnelIndex, fsMplsLdpCrlspTnlName DisplayString, fsMplsLdpCrlspTnlDirection INTEGER, fsMplsLdpCrlspTnlSignallingProto INTEGER, fsMplsLdpCrlspTnlSetupPrio INTEGER, fsMplsLdpCrlspTnlHoldingPrio INTEGER, fsMplsLdpCrlspTnlPeakDataRate BitRate, fsMplsLdpCrlspTnlPeakBurstSize BurstSize, fsMplsLdpCrlspTnlCommittedDataRate BitRate, fsMplsLdpCrlspTnlCommittedBurstSize BurstSize, fsMplsLdpCrlspTnlExcessBurstSize BurstSize, fsMplsLdpCrlspTnlIsPinned TruthValue, fsMplsLdpCrlspTnlFrequency INTEGER, fsMplsLdpCrlspTnlWeight INTEGER, fsMplsLdpCrlspTnlRowStatus RowStatus } fsMplsLdpCrlspTnlIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Uniquely identifies this row." ::= { fsMplsLdpCrlspTnlEntry 1 } fsMplsLdpCrlspTnlName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port." ::= { fsMplsLdpCrlspTnlEntry 2 } fsMplsLdpCrlspTnlDirection OBJECT-TYPE SYNTAX INTEGER { in(1), out(2), inOut(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional." ::= { fsMplsLdpCrlspTnlEntry 3 } fsMplsLdpCrlspTnlSignallingProto OBJECT-TYPE SYNTAX INTEGER { none(1), ldp(2), rsvp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The signaling protocol, if any, that set up this tunnel." DEFVAL { none } ::= { fsMplsLdpCrlspTnlEntry 4 } fsMplsLdpCrlspTnlSetupPrio OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The setup priority of this tunnel." REFERENCE "Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , March 1999., Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , Feb. 1999." ::= { fsMplsLdpCrlspTnlEntry 5 } fsMplsLdpCrlspTnlHoldingPrio OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The holding priority for this tunnel." REFERENCE " Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft , March 1999., Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , Feb. 1999." ::= { fsMplsLdpCrlspTnlEntry 6 } fsMplsLdpCrlspTnlPeakDataRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The peak rate - the maximum rate at which traffic will be sent on the CRLSP." REFERENCE "Section 4.3.1.2, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { fsMplsLdpCrlspTnlEntry 7 } fsMplsLdpCrlspTnlPeakBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { fsMplsLdpCrlspTnlEntry 8 } fsMplsLdpCrlspTnlCommittedDataRate OBJECT-TYPE SYNTAX BitRate UNITS "bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The committed rate - the committed rate at which traffic will be sent on the CRLSP." REFERENCE "Section 4.3.1.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { fsMplsLdpCrlspTnlEntry 9 } fsMplsLdpCrlspTnlCommittedBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { fsMplsLdpCrlspTnlEntry 10 } fsMplsLdpCrlspTnlExcessBurstSize OBJECT-TYPE SYNTAX BurstSize UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP." REFERENCE "Section 4.3.1.4, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." DEFVAL { 0 } ::= { fsMplsLdpCrlspTnlEntry 11 } fsMplsLdpCrlspTnlIsPinned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the loose-routed hops of this tunnel are to be pinned." DEFVAL { false } ::= { fsMplsLdpCrlspTnlEntry 12 } fsMplsLdpCrlspTnlFrequency OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frequency of usage of the established CRLSP." REFERENCE "Section 4.3.1.1, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." ::= { fsMplsLdpCrlspTnlEntry 13 } fsMplsLdpCrlspTnlWeight OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the weight that is the established CRLSP." REFERENCE "Section 4.3, Constraint-Based LSP Setup using LDP, Jamoussi, et. al, , August 1999." ::= { fsMplsLdpCrlspTnlEntry 14 } fsMplsLdpCrlspTnlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the fsMplsLdpErHopTable, associated with this tunnel." ::= { fsMplsLdpCrlspTnlEntry 15 } -- -- Er-Hop Table -- fsMplsLdpCrlspErHopTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMplsLdpCrlspErHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fsMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in fsMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the fsMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel." ::= { fsMplsLdpCrlspTnlObjects 2 } fsMplsLdpCrlspErHopEntry OBJECT-TYPE SYNTAX FsMplsLdpCrlspErHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP." INDEX { fsMplsLdpLsrIncarnID, fsMplsLdpCrlspTnlIndex, fsMplsLdpCrlspErHopIndex } ::= { fsMplsLdpCrlspErHopTable 1 } FsMplsLdpCrlspErHopEntry ::= SEQUENCE { fsMplsLdpCrlspErHopIndex INTEGER, fsMplsLdpCrlspErHopAddrType INTEGER, fsMplsLdpCrlspErHopIpv4Addr IpAddress, fsMplsLdpCrlspErHopIpv4PrefixLen INTEGER, fsMplsLdpCrlspErHopStrictOrLoose INTEGER, fsMplsLdpCrlspErHopRowStatus RowStatus } fsMplsLdpCrlspErHopIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying the particular hop." ::= { fsMplsLdpCrlspErHopEntry 1 } fsMplsLdpCrlspErHopAddrType OBJECT-TYPE SYNTAX INTEGER { ipV4(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Address type of this hop." DEFVAL { ipV4 } ::= { fsMplsLdpCrlspErHopEntry 2 } fsMplsLdpCrlspErHopIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "If fsMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0." ::= { fsMplsLdpCrlspErHopEntry 3 } fsMplsLdpCrlspErHopIpv4PrefixLen OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "If fsMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0." ::= { fsMplsLdpCrlspErHopEntry 4 } fsMplsLdpCrlspErHopStrictOrLoose OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this is a strict or loose hop." ::= { fsMplsLdpCrlspErHopEntry 5 } fsMplsLdpCrlspErHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying and deleting this row." ::= { fsMplsLdpCrlspErHopEntry 6 } --- --- fsMplsLdpScalarGroup --- fsMplsLdpCfgInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The information of MPLS(Multiprotocol Label Switching) LDP(Label Distribution Protocol) configuration." ::= { fsMplsLdpScalarGroup 1 } fsMplsLdpSessInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The information of MPLS(Multiprotocol Label Switching) LDP(Label Distribution Protocol) session." ::= { fsMplsLdpScalarGroup 2 } --- --- Notifications --- fsMplsLdpNotificationPrefix OBJECT IDENTIFIER ::= { fsMplsLdpNotifications 0 } fsMplsLdpFailedInitSessionThresholdExceeded NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID, fsMplsLdpEntityFailedInitSessionThreshold } STATUS current DESCRIPTION "This notification is generated whenever the value of fsMplsLdpEntityFailedInitSessionThreshold is exceeded." ::= { fsMplsLdpNotificationPrefix 1 } -- OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID, -- fsMplsLdpEntityFailedInitSessionThreshold -- } -- STATUS current -- DESCRIPTION -- "This notification is generated whenever the value -- of fsMplsLdpEntityFailedInitSessionThreshold is -- exceeded." -- ::= { fsMplsLdpNotificationPrefix 1 } fsMplsLdpCrlspTunnelUp NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID, fsMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel." ::= { fsMplsLdpNotificationPrefix 2 } fsMplsLdpCrlspTunnelDown NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID, fsMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc.," ::= { fsMplsLdpNotificationPrefix 3 } fsMplsLdpCrlspTunnelSetupFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID, fsMplsLdpCrlspTnlIndex } STATUS current DESCRIPTION "This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc.," ::= { fsMplsLdpNotificationPrefix 4 } fsMplsLdpIncarnUpEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID} STATUS current DESCRIPTION "This notification is generated by LDP to notify the Incarnation UP Event failure" ::= { fsMplsLdpNotificationPrefix 11 } fsMplsLdpIncarnDownEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID } STATUS current DESCRIPTION "This notification is generated by LDP to notify the Incarnation DOWN Event failure" ::= { fsMplsLdpNotificationPrefix 12 } fsMplsLdpEntityUpEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID} STATUS current DESCRIPTION "This notification is generated by LDP to notify the ENTITY UP Event failure" ::= { fsMplsLdpNotificationPrefix 13 } fsMplsLdpEntityDownEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpLsrIncarnID, fsMplsLdpEntityID } STATUS current DESCRIPTION "This notification is generated by LDP to notify the ENTITY DOWN Event failure" ::= { fsMplsLdpNotificationPrefix 14 } fsMplsLdpSessionUpEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpSessionID, fsMplsLdpSessionState } STATUS current DESCRIPTION "Generation of this trap occurs when the value of 'fsMplsLdpSessionState' enters the 'operational(5)' state." ::= { fsMplsLdpNotificationPrefix 15 } fsMplsLdpSessionDownEventFailure NOTIFICATION-TYPE OBJECTS { fsMplsLdpSessionID, fsMplsLdpSessionState } STATUS current DESCRIPTION "Generation of this trap occurs when the value of 'fsMplsLdpSessionState' leaves the 'operational(5)' state." ::= { fsMplsLdpNotificationPrefix 16 } fsMplsLdpMulLinkCfgInc NOTIFICATION-TYPE OBJECTS { fsMplsLdpCfgInfo, fsMplsLdpSessInfo } STATUS current DESCRIPTION "This notification is generated when the multi-link configurations were inconsistent" ::= { fsMplsLdpNotificationPrefix 17 } fsMplsLdpMulLinkCfgIncClear NOTIFICATION-TYPE OBJECTS { fsMplsLdpCfgInfo, fsMplsLdpSessInfo } STATUS current DESCRIPTION "This notification is generated when the multi-link configurations changed to consistent" ::= { fsMplsLdpNotificationPrefix 18 } fsMplsLdpSessNumExceed NOTIFICATION-TYPE OBJECTS { fsMplsLdpCfgInfo, fsMplsLdpSessInfo } STATUS current DESCRIPTION "This notification is generated when the number of LDP sessions has reached the specified upper limit" ::= { fsMplsLdpNotificationPrefix 19 } fsMplsLdpSessNumExceedClear NOTIFICATION-TYPE OBJECTS { fsMplsLdpCfgInfo, fsMplsLdpSessInfo } STATUS current DESCRIPTION "This notification is generated when the number of LDP sessions was below the specified lower limit" ::= { fsMplsLdpNotificationPrefix 20 } -- End of notifications. END