-- ====================================================================
-- Copyright (c) 2019 by FS.COM Inc. All rights reserved.
--
-- Description: The MIB is designed to get link sla detection information.
-- Reference: fs Enterprise MIB
-- =====================================================================

FS-LINK-SLA-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        DisplayString,TEXTUAL-CONVENTION,TimeStamp
            FROM SNMPv2-TC
        IpAddress, Integer32, Counter32, Counter64, OBJECT-TYPE,
        MODULE-IDENTITY, Gauge32, NOTIFICATION-TYPE, Unsigned32
            FROM SNMPv2-SMI
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        fsMgmt
            FROM FS-SMI;

    fsSLAMonitor MODULE-IDENTITY
        LAST-UPDATED "201906210000Z"            
        ORGANIZATION
            "FS.COM Inc."
        CONTACT-INFO
            "Tel: 400-865-2852 
             E-mail: https://www.fs.com/live_chat_service_mail.html"  
        DESCRIPTION
            "The MIB is designed to get statistic information of
             link sla."
        REVISION      "201906210000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { fsMgmt 163 }       
                               
                       
-- ========================================================================
-- Node definitions
-- ========================================================================
--Begin the node of fsSLAObjects.

    fsSLAObjects OBJECT IDENTIFIER ::= { fsSLAMonitor 1 }

-- ===============================================
-- Begin the table of fsSLATable.
-- ===============================================

    fsSLATable OBJECT-TYPE
        SYNTAX SEQUENCE OF FSSLAEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The SLA detect infomation fot every link connection. There is one
             entry in this table for each active SLA connection."
        ::= { fsSLAObjects 1 }

    fsSLAEntry OBJECT-TYPE
        SYNTAX FSSLAEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Information about fsSLAconnectTable."
        INDEX { fsSLARnsId }
        ::= { fsSLATable 1 }
				
    FSSLAEntry ::=
        SEQUENCE {
		    fsSLARnsId
                Integer32,
            fsSLAIntfName
                DisplayString,
            fsSLAIPAddr
            	IpAddress,
           	fsSLALinkState
           		INTEGER,
           	fsSLALinkDelay
           		Integer32,
           	fsSLALinkDropRate
           		Integer32,
			fsSLAIntfTxByteCount
           		Counter64,
			fsSLAIntfRxByteCount
           		Counter64,
			fsSLALinkByteUsedRate
           		Integer32
        }

    fsSLARnsId OBJECT-TYPE
        SYNTAX Integer32 (0..500)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The id of rns detect."
        ::= { fsSLAEntry 1 }  
   
    fsSLAIntfName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The name of SLA interface."
        ::= { fsSLAEntry 2 }
    
    fsSLAIPAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The SLA detection IP address."
        ::= { fsSLAEntry 3 }
    
    fsSLALinkState OBJECT-TYPE
        SYNTAX INTEGER
        {
            down(0),
            up(1)         
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The state of connnetion, 0 - down, 1 - up."
        ::= { fsSLAEntry 4 } 
          
    fsSLALinkDelay OBJECT-TYPE
        SYNTAX Integer32 (0..10000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The delay of the SLA connection."
        ::= { fsSLAEntry 5 }       
    
	fsSLALinkDropRate OBJECT-TYPE
	    SYNTAX Integer32 (0..1000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The drop rate of the SLA connection."
        ::= { fsSLAEntry 6 }
		
	fsSLAIntfTxByteCount OBJECT-TYPE
	    SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Tx BYTE count of the SLA interface."
        ::= { fsSLAEntry 7 }

	fsSLAIntfRxByteCount OBJECT-TYPE
	    SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Rx BYTE count of the SLA interface."
        ::= { fsSLAEntry 8 }

    fsSLALinkByteUsedRate OBJECT-TYPE	
	    SYNTAX Integer32 (0..100)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The band used rate of the SLA connection."
        ::= { fsSLAEntry 9 }	

-- ===============================================
-- Begin the fsSLATrapObject.
-- ===============================================

    fsSLATrap OBJECT IDENTIFIER ::= { fsSLAObjects 2 }
    
    fsSLANotifications OBJECT IDENTIFIER ::= { fsSLATrap 1 }
    
    fsSLASignalThreshold NOTIFICATION-TYPE
        OBJECTS { fsSLAIntfName,
		          fsSLAIPAddr, 
        		  fsSLALinkState,
                  fsSLALinkDelay,
                  fsSLALinkDropRate,
                  fsSLAIntfTxByteCount,
                  fsSLAIntfRxByteCount,
                  fsSLALinkByteUsedRate				  
        		}
        STATUS current
        DESCRIPTION
            "This notification is generated when SLA send infomation to server."
        ::= { fsSLANotifications 1 }
           
END