-- ============================================================================= -- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved. -- -- Description: -- The file defines a MIB to provide WLAN configuration information. -- Reference: -- Version: V3.8 -- History: -- V1.0 2006-05-10 Initial version, created by shiyang (Richard) -- V1.1 2007-02-01 modified by xingjichen(Daniel) -- Added fsDot11RadioIntfConfigTable,fsDot11RadioIntfBindTable, -- fsDot11StaKeepALiveTimerIntvl,fsDot11StaIdleTimerIntvl, -- fsDot11BroadcastProbeReply. -- V1.2 2007-04-27 modified by shiyang(Richard) -- Replace fsDot11UnicastCipherKeyIndex, fsDot11UnicastCipherKey, -- fsDot11BroadcastCipherKeyIndex and fsDot11BroadcastCipherKey -- with fsDot11CipherKeyIndex, fsDot11CipherKey as per CLI change. -- Delete fsDot11MaxTxLifetime as per CLI change. -- Add fsDot11GlobalCountryCode,fsDot11APScanMode. -- fsDot11ACCtrlTunnelSecSupport and fsDot11ACDataTunnelSecSupport. -- Move fsDot11StaKeepALiveTimerIntvl,fsDot11StaIdleTimerIntvl -- and so on to fsDot11GlobeConfigGroup. -- Split fsDot11ServicePolicyTable into fsDot11ServicePolicyTable -- and fsDot11ServicePolicyExtTable. -- For fsDot11SecurityCiphers node,update its description for case of -- value equals to zero. -- V1.3 2007-06-19 modified by Vikas K -- Add new table of fsDot11DataRateConfigTable for AP Configuration -- Group. -- Add new node of fsDot11APName for fsDot11APTemplateTable. -- Modify the fsDot11APScanMode from read-only to read-write. -- Add undo functionality to node fsDot11WlanInfBindingID and -- fsDot11Description. -- Add fsDot11StatisInterv to the fsDot11APTemplateTable. -- V1.4 2007-10-9 modified by Jagan K -- Add new table fsDot11WlanBssIfTable for WLAN BSS interface -- configuration. -- Add new table fsDot11WlanEssIfTable for WLAN ESS interface -- configuration. -- Add new table fsDot11WlanEthernetIfTable for WLAN Ethernet interface -- configuration. -- V1.5 2007-12-21 modified by wanghao (Kumar) -- Add fsDot11ACAutoAPSupport, fsDot11AutoAPName, -- fsDot11PersistentName to fsDot11GlobeConfigGroup -- Add fsDot11ClientMaxCount to fsDot11ServicePolicyTable -- Add fsDot11APBroadcastProbeReply, fsDot11StaIdleTimerInterv, -- fsDot11StaKeepAliveTimerInterv, fsDot11APCir, fsDot11APCbs -- to fsDot11APTemplateTable. -- V1.6 2008-02-25 modified by wanghao (Kumar) -- Add fsDot11RdoClientMaxCount to fsDot11RadioPolicyTable. -- V1.7 2008-04-01 modified by wangbin -- Add fsDot11PortSecurityTable to fsDot11InterfaceConfigGroup. -- Add fsDot11PortSecurityMode, fsDot11SecurityUserLoginTxKeyType, -- fsDot11SecurityPskKeyMode, fsDot11SecurityPskKeyString -- to fsDot11PortSecurityTable. -- V1.8 2008-08-01 modified by ChangHuifeng -- Add fsDot11ACBackupGroup and -- fsDot11RadioElementConfigGroup. -- Add fsDot11WlanMeshIfTable to fsDot11InterfaceConfigGroup. -- Add fsDot11APPriorityLevel and fsDot11APElementID to -- fsDot11APTemplateTable. -- Add fsDot11CfgRdElementID to fsDot11RadioToConfigTable. -- Add fsDot11APDevDetectEnable to fsDot11APTemplateEntry. -- Obsolete fsDot11StatisInterv -- Change default value of fsDot11APScanMode to passive. -- Change units of fsDot11BeaconInterval and -- fsDot11RadioCfgBeaconIntvl to TU. -- Remove default value of fsDot11SSIDEncryptionMode. -- Change MAC-ACCESS of objects in fsDot11RadioToConfigTable -- from read-create to read-write. -- Change name of fsDot11IWlanEssRowStatus to fsDot11WlanEssRowStatus. -- Change description of fsDot11PortSecurityTable. -- V1.9 2008-11-07 modified by Wang Lu and Li Yugang -- Add fsDot11IntfTrapThreshold to fsDot11GlobeConfigGroup -- Add fsDot11SPInCirMode, fsDot11SPInCirValue, fsDot11SPOutCirMode, -- fsDot11SPOutCirValue to fsDot11ServicePolicyTable -- Add fsDot11CfgWorkMode to fsDot11RadioToConfigTable -- Add fsDot11RadioCfgWorkMode to fsDot11RadioIntfConfigTable. -- Add new traps fsDot11CfgCipherChange and fsDot11CfgPSKChange. -- Add fsDot11MonitorInterval, fsDot11SampleInterval, -- fsDot11ChnlSwitChkInterval, fsDot11APUserUplimit, -- fsDot11APL2IsolateEnable to fsDot11GlobeConfigGroup. -- Add fsDot11RadioCfgOnly11gEnable to fsDot11RadioIntfConfigTable. -- Add fsDot11RadioWDSTable to fsDot11RadioElementConfigGroup. -- V2.0 2009-03-20 modified by caizibin -- Add value ext(6) to fsDot11PortSecurityMode -- V2.1 2009-05-07 modified by Li Yugang, Wang Shaojie, Jin Yi -- Add fsDot11APBSSIDSupportNum, fsDot11APLastUpdateStatTime, -- fsDot11APDoSProtectEnable, fsDot11MaxAPPerIf to -- fsDot11GlobeConfigGroup. -- Add fsDot11WlanInfPVID to fsDot11ServicePolicyTable. -- Add fsDot11CipherKeyType to fsDot11ServicePolicyExtTable. -- Add fsDot11CfgPwrAttValue to fsDot11RadioToConfigTable. -- Add new table fsDot11APSysInfoSetTable to fsDot11APConfigGroup. -- Add fsDot11SSIDWepIDConflictTrap to fsDot11CfgNotifications. -- Add new table fsDot11CfgTrapVarObjects to fsDot11CfgNotifyGroup. -- V2.2 2009-07-29 modified by Heziqi -- Add new node fsDot11ServiceSetVlanId for fsDot11APServiceSetTable. -- Add fsDot11UplinkTrackId to fsDot11GlobeConfigGroup. -- Add fsDot11APLimitTable. -- Change description of fsDot11StaKeepALiveTimerIntvl. -- Add new node fsDot11RadioTxArithmetic for FsDot11RadioToConfigTable. -- V2.3 2009-07-29 modified by Jinyi -- Add new table fsDot11APIfSetTable -- V2.4 2009-12-01 modified by Wang Shaojie -- Add new node fsDot11APGetIPMethod for fsDot11APTemplateTable. -- Add new group fsDot11CfgTrapConfigGroup. -- Add new table fsDot11CfgSwitchTrapTable to fsDot11CfgTrapConfigGroup. -- Add new node fsDot11BeaconIntervalMs to fsDot11RadioPolicyTable. -- Add new node fsDot11SPInCirStaticValue, fsDot11SPOutCirStaticValue -- to fsDot11ServicePolicyTable. -- Modify description of fsDot11SecurityCiphers. -- Add new node fsDot11StatisIntervMode to fsDot11APTemplateTable. -- Modify SYNTAX of fsDot11APWorkMode. -- Modify STATUS of fsDot11StatisInterv. -- Add new node fsDot11SmartRateSet to fsDot11DataRateConfigTable. -- 2010-02-22 modified by Wang Chunsheng -- Add new node fsDot11CfgChannelLockStat, fsDot11CfgPowerLockStat, -- fsDot11CfgLBRdGroupId, fsDot11CfgRRMSDRdGroupId to fsDot11RadioToConfigTable. -- 2010-03-15 modified by Wang Lu -- Add fsDot11RtCollectSwitch, fsDot11RglCollectIntvl, and -- fsDot11RtCollectIntvl to fsDot11GlobeConfigGroup -- Add fsDot11SPIsolate to fsDot11ServicePolicyTable -- Add fsDot11APServiceVlanTable, fsDot11RadioConfigTable, -- fsDot11RadioPolicyExtTable and fsDot11RadioSSIDCfgTable -- Remove fsDot11CfgTrapConfigGroup -- Add fsDot11SrvPortSecurityTable -- 2010-06-01 Modified by Wang Shaojie, Yin Junjie -- Add fsDot11RCApPowerLevel, fsDot11RCDynamicChlState, -- fsDot11RCDynamicPowerState to fsDot11RadioConfigTable. -- Add fsDot11APSerialIDTable -- Add fsDot11APSTVlanTable -- 2010-07-08 Modified the index of fsDot11APSysInfoSetTable by jinyi -- 2010-08-05 Modified by Yin Junjie -- Add new table fsDot11SrvPolicyExtendTable -- Add fsDot11SPEnable to fsDot11SrvPolicyExtendTable -- 2010-09-02 Modified by Yin Junjie -- Add new node fsDot11AdjIntfTrapThreshold -- to fsDot11GlobeConfigGroup -- Add fsDot11RCRadioStatus to fsDot11RadioConfigTable -- V2.5 2010-09-25 Modified by Wu Xiaopeng -- Remove Size list of fsDot11APName. -- V2.6 2011-05-23 Modified by Cui Kai -- Add new node fsDot11WlanexAuthServerIP to fsDot11ServicePolicyTable -- 2011-07-08 Modified by Niu Jian -- Change type of fsDot11CfgSTNASPortID to OCTET STRING -- V2.7 2011-07-13 Modified by Yu Bo -- Add new node fsDot11RCRadioRate to fsDot11RadioConfigTable -- Add new node fsDot11RCPwrAdjustStepLength to fsDot11RadioConfigTable -- 2011-08-08 Modified by Xiao Min -- Add new table fsDot11nRadioCfg2Table -- 2011-08-10 Modified by limingjin -- Add fsDot11RadioCfgType2 to fsDot11RadioIntfConfigTable -- Add fsDot11RCRadioType2 to fsDot11RadioConfigTable -- Add fsDot11CfgRadioType2 to fsDot11RadioToConfigTable -- V2.8 2011-09-28 Modified by zhanghu -- Add fsDot11ApTrapEnabled to fsDot11APTemplateTable -- Add fsDot11AllAPMonitorMode to fsDot11APTemplateTable -- Add fsDot11SIDAPTemplateName, fsDot11SIDModelAlias, fsDot11SIDAPDescription, fsDot11SIDRowStatus, -- fsDot11SIDAPName, fsDot11SIDStatisInterv, fsDot11SIDAPBroadcastProbeReply, -- fsDot11SIDAPStaIdleTimerInterv, fsDot11SIDStaKeepAliveTimerInterv, -- fsDot11SIDAPCir, fsDot11SIDAPCbs, fsDot11SIDAPPriorityLevel, -- fsDot11SIDAPElementID, fsDot11SIDAPDevDetectEnable, fsDot11SIDAPStatisIntervMode -- to fsDot11APSerialIDTable -- 2011-08-28 Modified by Wang Lu -- Add fsDot11CfgSaEnable, fsDot11CfgSaBand, fsDot11CfgIDSEnable, -- fsDot11CfgSaCltRtFFTData to fsDot11RadioToConfigTable -- V2.9 2012-08-10 by Zhang Cong cong -- Add new node fsDot11ConfigureAPMacAddress to fsDot11CfgTrapVarObjects -- Add new object fsDot11ConfigureAPMacAddress to fsDot11SSIDWepIDConflictTrap -- V3.0 2013-04-15 by Shao Pengfei & Li Shihao -- Add new node fsDot11GlobalApFmwUpdState to fsDot11GlobeConfigGroup -- Add new node fsDot11ApFmwUpdState to fsDot11APTemplateTable -- Add new node fsDot11SPBeaconMeasEnable to fsDot11ServicePolicyTable -- Add new node fsDot11SPBeaconMeasType to fsDot11ServicePolicyTable -- Add new node fsDot11SPBeaconMeasInterval to fsDot11ServicePolicyTable -- V3.1 2013-08-30 by Xiao Mengmeng & Li Qian & Ji Chunyu & Liu Yawen -- Add fsDot11AuthenModeCM to fsDot11ServicePolicyTable -- Add fsDot11SecIEStatusCM to fsDot11ServicePolicyTable -- Add fsDot11SecurityCiphersCM to fsDot11ServicePolicyTable -- Add fsDot11SrvPolicyStatusCM to fsDot11ServicePolicyTable -- Add fsDot11CfgSTNASID to fsDot11APSTVlanTable -- Add fsDot11RCPreambleLenCM to fsDot11RadioConfigTable -- Add fsDot11RCDynamicChlStateCM to fsDot11RadioConfigTable -- Add fsDot11RCRadioStatusCM to fsDot11RadioConfigTable -- Add fsDot11SIDAPWorkModeCM to fsDot11APSerialIDTable -- Add fsDot11nRadioCfg2AMpduEnableCM to fsDot11nRadioCfg2Table -- Add fsDot11nRadioCfg2ChannelBandCM to fsDot11nRadioCfg2Table -- Add fsDot11nRadioCfg2ShortGiEnableCM to fsDot11nRadioCfg2Table -- 2013-12-24 Modified by Chen Guoxi -- Add mode80 to fsDot11nChanelBand and fsDot11nRadioCfg2ChannelBand -- Add new node fsDot11nClientDot11acOnly to fsDot11nRadioCfgTable -- Add new node fsDot11nRadioCfg2ClientDot11acOnly to fsDot11nRadioCfg2Table -- V3.2 2014-02-10 by Zhou Weichao -- Add fsDot11ACNasIDCM to fsDot11GlobeConfigGroup -- Add fsDot11SSIDHiddenCM to fsDot11ServicePolicyTable -- Add fsDot11SPIsolateCM to fsDot11ServicePolicyTable -- Add fsDot11RPBeaconIntervalCM to fsDot11RadioPolicyExtTable -- Add fsDot11StatisIntervModeCM to fsDot11APTemplateTable -- Add fsDot11APNasIDCM to fsDot11APTemplateTable -- Add fsDot11RCDynamicPowerStateCM to fsDot11RadioConfigTable -- Add fsDot11RCRadioRateCM to fsDot11RadioConfigTable -- Add fsDot11nRadioCfg2ClientDot11nOnlyCM to fsDot11nRadioCfg2Table -- Modify fsDot11WlanexAuthServerIP -- Add fsDot11RadioCfgRssithresholdCM to fsDot11RadioIntfConfigTable -- Add fsDot11SrvPortSecurityModeCM to fsDot11SrvPortSecurityTable -- V3.3 2014-5-14 Add by yubo -- Add fsDot11RCRssiThresholdCM to fsDot11RadioConfigTable -- V3.4 2014-9-19 Add by wanglu -- Add fsDot11SrvL2AuthenTable -- Add fsDot11AkmMode to fsDot11ServicePolicyExtTable -- Add fsDot11PskKey to fsDot11ServicePolicyExtTable -- Add fsDot11CfgSaRptDevType to fsDot11RadioToConfigTable -- Add fsDot11CfgSaTrapDevEnable to fsDot11RadioToConfigTable -- Add fsDot11CfgSaTrapDevType to fsDot11RadioToConfigTable -- Add fsDot11CfgSaTrapAQEnable to fsDot11RadioToConfigTable -- Add fsDot11CfgSaTrapAQThreshold to fsDot11RadioToConfigTable -- Add fsDot11CfgSaDrivenRRMEnable to fsDot11RadioToConfigTable -- Add fsDot11CfgSaDrivenRRMSnt to fsDot11RadioToConfigTable -- V3.5 2016-3-11 Add by wuqinggen -- Add fsDot11FwdVlanBitMapLow to fsDot11ServicePolicyTable -- Add fsDot11FwdVlanBitMapHigh to fsDot11ServicePolicyTable -- Add fsDot11ServicePolicyName to fsDot11ServicePolicyTable -- 2016-3-11 add by yubo 04460 -- Add fsDot11ApCoveragetype to fsDot11APTemplateTable -- Add fsDot11RCDynamicChlStateSelfDecisiveCM to fsDot11RadioConfigTable -- Add fsDot11RCDynamicPowerStateSelfDecisiveCM to fsDot11RadioConfigTable -- 2016-06-15 Add by zhouwenshuai zkf6157 -- Add fsDot11LocalACTemplateTable -- Add new node fsDot11ACRole to fsDot11GlobeConfigGroup -- Add new node fsDot11GlobalLocalACState to fsDot11GlobeConfigGroup -- Add new node fsDot11CentralACIPAddress to fsDot11GlobeConfigGroup -- Add new node fsDot11CentralACIPv6Address to fsDot11GlobeConfigGroup -- Add new node fsDot11APControlAddressState to fsDot11APTemplateTable -- Add new node fsDot11APControlAddressIPv4 to fsDot11APTemplateTable -- Add new node fsDot11APControlAddressIPv6 to fsDot11APTemplateTable -- Add new node fsDot11APLocalACName to fsDot11APTemplateTable -- 2016-12-06 Add by zhouwenshuai zkf6157 -- Add value mode160(4) mode80and80(5) to fsDot11nChanelBand -- Add value mode160(4) mode80and80(5) to fsDot11nRadioCfg2ChannelBand -- 2017-10-09 Add by lixiaoyi, jiaohaina, guozhanhua, chenxueke -- Add new node fsDot11APEchoInterval to fsDot11APTemplateTable -- Add new node fsDot11SIDEchoInterval to fsDot11APSerialIDTable -- Add new node fsDot11SecurityModeCM to fsDot11ServicePolicyTable -- Add new node fsDot11PreConflictTemplateSSID,fsDot11CurrConflictTemplateSSID -- to fsDot11SSIDWepIDConflictTrap -- Add new node fsDot11SPInCbsValue to fsDot11ServicePolicyTable -- Add new node fsDot11SPOutCbsValue to fsDot11ServicePolicyTable -- Add value mode80(3), mode160(4), mode80and80(5) to fsDot11nRadioCfg2ChannelBandCM -- V3.6 Add value 0 to fsDot11EchoInterval -- 2018-06-04 Add by licheng -- Add new node fsDot11iMcIP to fsDot11GlobeConfigGroup -- Add new node fsDot11iMcPort to fsDot11GlobeConfigGroup -- 2018-08-08 Add by wanghailong -- Add new node fsDot11APProvisionAPIPv4 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionIPv4Mask to fsDot11APTemplateTable -- Add new node fsDot11APProvisionAPIPv6 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionIPv6PrefixLen to fsDot11APTemplateTable -- Add new node fsDot11APProvisionACIPv4 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionACIpv6 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionGateWayIPV4 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionGateWayIPV6 to fsDot11APTemplateTable -- Add new node fsDot11APProvisionSave to fsDot11GlobeConfigGroup -- 2018-10-17 Add by huanglu,zhangming -- Add new node fsDot11ServiceSetVlanGroup to fsDot11APServiceSetTable -- Add macAndDot1x(7) to fsDot11L2AuthenMode -- 2018-12-11 Add by wangshujuan -- Add new node fsDot11ApRenameCurrentName to fsDot11GlobeConfigGroup -- Add new node fsDot11ApRenameNewName to fsDot11GlobeConfigGroup -- Add fsDot11RemoteCfgApTable -- Add fsDot11RemoteCfgIFTable -- 2020-08-03 Add by qiuchunxia -- Add new fsDot11IPLearningTable -- Add new node fsDot11IPLearningServiceName to fsDot11IPLearningVlanBitMapH -- 2020-08-12 Add by suting -- Add new node fsDot11APMapConfigFileName to fsDot11APTemplateTable -- Add fsDot11CfgSPInCirMode to fsDot11RadioToConfigTable -- Add fsDot11CfgSPInCirValue to fsDot11RadioToConfigTable -- Add fsDot11CfgSPOutCirMode to fsDot11RadioToConfigTable -- Add fsDot11CfgSPOutCirValue to fsDot11RadioToConfigTable -- 2020-12-29 Add by zhoucailu,sunchangquan -- Add fsDot11RmtIfManagement to fsDot11RemoteCfgIFTable -- Add fsDot11WlanInfCustomerPVID to fsDot11ServicePolicyTable -- V3.7 2021-06-18 modified by liyapeng -- Modify description of fsDot11PreambleLen -- Modify description of fsDot11StatisIntervMode, fsDot11StatisIntervModeCM And fsDot11SIDAPStatisIntervMode -- V3.8 2023-04-24 modified by qiuchunxia -- Modify fsDot11CfgSaRptDevType and fsDot11CfgSaTrapDevType -- 2023-08-20 modified by wanggongshuai -- Modify fsDot11nChanelBand, fsDot11nRadioCfg2ChannelBand and fsDot11nRadioCfg2ChannelBandCM -- ============================================================================= FS-DOT11-CFG-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, RowStatus, DisplayString, DateAndTime, MacAddress FROM SNMPv2-TC ifIndex FROM RFC1213-MIB MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB fsDot11, FsDot11RadioType, FsDot11TxPwrLevelScopeType, FsDot11ChannelScopeType, FsDot11SSIDStringType, FsDot11AuthenType, FsDot11RadioScopeType, FsDot11SSIDEncryptModeType, FsDot11SecIEStatusType, FsDot11PreambleType, FsDot11ServicePolicyIDType, FsDot11TunnelSecSchemType, FsDot11RadioElementIndex, FsDot11WorkMode, FsDot11CirMode, fsDot11APElementIndex, FsDot11ObjectIDType, FsDot11RadioType2, FsDot11TruthValueCM FROM FS-DOT11-REF-MIB; fsDot11CFG MODULE-IDENTITY LAST-UPDATED "202308201800Z" -- Aug 20, 2023 at 18:00 GMT ORGANIZATION "Fiberstore Co.,Limited" CONTACT-INFO "" DESCRIPTION "This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key." REVISION "202308201800Z" -- Aug 20, 2023 at 18:00 GMT DESCRIPTION " Modified to add new values. " REVISION "202304241800Z" -- Apr 24, 2023 at 18:00 GMT DESCRIPTION " Modified to add new values. " REVISION "202106181800Z" -- Jun 18, 2021 at 18:00 GMT DESCRIPTION " Modify nodes with incorrect description information " REVISION "202012111800Z" -- Dec 11, 2020 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new tables." REVISION "201710091800Z" -- Oct 09, 2017 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "201603111800Z" -- Mar 11, 2016 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "201409191800Z" -- Sep 19, 2014 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT DESCRIPTION "Modified to remove some issue." REVISION "201009021800Z" -- Sep 2, 2010 at 18:00 GMT DESCRIPTION "Modified to add new node." REVISION "200907291800Z" -- Jul 29, 2009 at 18:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200903201530Z" -- Mar 20, 2009 at 15:30 GMT DESCRIPTION "Modified to add new value for appointed node." REVISION "200811071530Z" -- Nov 07, 2008 at 15:30 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200807091800Z" -- July 09, 2008 at 18:00 GMT DESCRIPTION "Modified to add new groups." REVISION "200802251800Z" -- Feb 25, 2008 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "200712211800Z" -- Dec 21, 2007 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "200710091655Z" -- October 09, 2007 at 16:55 GMT DESCRIPTION "changed for new requirements" REVISION "200706191800Z" -- June 19, 2007 at 18:00 GMT DESCRIPTION "Modified to add new table." REVISION "200704272000Z" -- Apr 27, 2007 at 20:00 GMT DESCRIPTION "Modified to fix some issue." REVISION "200702012000Z" -- February 01, 2007 at 20:00 GMT DESCRIPTION "Modified to support fat AP." REVISION "200605101900Z" -- May 10, 2006 at 19:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { fsDot11 4 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** -- AP Configuration Group -- DEFINED AS "The group to provide the configuration information -- for APs. fsDot11GlobeConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 1 } fsDot11PolicyConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 2 } -- Policy Configuration Group has the following children: -- fsDot11RadioPolicyTable ::= { fsDot11PolicyConfigGroup 1 } -- fsDot11ServicePolicyTable ::= { fsDot11PolicyConfigGroup 2 } -- fsDot11ServicePolicyExtTable ::= { fsDot11PolicyConfigGroup 3 } -- fsDot11RadioPolicyExtTable ::= { fsDot11PolicyConfigGroup 4 } -- fsDot11SrvPortSecurityTable ::= { fsDot11PolicyConfigGroup 5 } -- fsDot11SrvPolicyExtendTable ::= { fsDot11PolicyConfigGroup 6 } -- fsDot11SrvL2AuthenTable ::= { fsDot11PolicyConfigGroup 7 } -- fsDot11IPLearningTable ::= { fsDot11PolicyConfigGroup 8 } fsDot11APConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 3 } -- AP Configuration Group has the following children: -- fsDot11APTemplateTable ::= { fsDot11APConfigGroup 1 } -- fsDot11RadioToConfigTable ::= { fsDot11APConfigGroup 2 } -- fsDot11APServiceSetTable ::= { fsDot11APConfigGroup 3 } -- fsDot11APSysInfoSetTable ::= { fsDot11APConfigGroup 4 } -- fsDot11APLimitTable ::= { fsDot11APConfigGroup 5 } -- fsDot11APSerialIDTable ::= { fsDot11APConfigGroup 10 } -- fsDot11APSTVlanTable ::= { fsDot11APConfigGroup 11 } fsDot11RadioIntfConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 4 } -- Radio Interface Group has the following children: -- fsDot11RadioIntfConfigTable ::= { fsDot11RadioIntfConfigGroup 1 } -- fsDot11RadioIntfBindTable ::= { fsDot11RadioIntfConfigGroup 2 } fsDot11DataRateConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 5 } -- Data Rate Config Group has the following children: -- fsDot11DataRateConfigTable ::= { fsDot11DataRateConfigGroup 1 } fsDot11InterfaceConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 6 } -- Interface Config Group has the following children: -- fsDot11WlanEssIfTable ::= { fsDot11InterfaceConfigGroup 1 } -- fsDot11WlanBssIfTable ::= { fsDot11InterfaceConfigGroup 2 } -- fsDot11WLANEthernetIfTable ::= { fsDot11InterfaceConfigGroup 3 } -- fsDot11PortSecurityTable ::= { fsDot11InterfaceConfigGroup 4 } -- fsDot11WlanMeshIfTable ::= { fsDot11InterfaceConfigGroup 5 } fsDot11ACBackupGroup OBJECT IDENTIFIER ::= { fsDot11CFG 7 } fsDot11RadioElementConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 8 } -- Radio Element Config Group has the following children: -- fsDot11nRadioCfgTable ::= { fsDot11RadioElementConfigGroup 1 } -- fsDot11RadioWDSTable ::= { fsDot11RadioElementConfigGroup 2 } -- fsDot11nRadioCfg2Table ::= { fsDot11RadioElementConfigGroup 3 } fsDot11CfgNotifyGroup OBJECT IDENTIFIER ::= { fsDot11CFG 9 } fsDot11LocalACConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 10 } -- LocalAC Configuration Group has the following children: -- fsDot11LocalACTemplateTable ::= { fsDot11LocalACConfigGroup 1 } fsDot11RemoteConfigGroup OBJECT IDENTIFIER ::= { fsDot11CFG 11 } -- Remote Configuration Group has the following children: -- fsDot11RemoteCfgApTable ::= { fsDot11RemoteConfigGroup 1 } -- fsDot11RemoteCfgIFTable ::= { fsDot11RemoteConfigGroup 2 } -- ***************************************************************************** -- * fsDot11GlobeConfigGroup Definition -- ***************************************************************************** fsDot11GlobalCountryCode OBJECT-TYPE SYNTAX OCTET STRING(SIZE(3)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the country code for wireless network." ::= { fsDot11GlobeConfigGroup 1 } fsDot11StaKeepALiveTimerIntvl OBJECT-TYPE SYNTAX Unsigned32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled." DEFVAL { 0 } ::= { fsDot11GlobeConfigGroup 2 } fsDot11StaIdleTimerIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { fsDot11GlobeConfigGroup 3 } fsDot11BroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { fsDot11GlobeConfigGroup 4 } fsDot11APScanMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the scanning mode for AP. The following values are supported: active - AP will actively do scan. passive - AP will passively do scan." DEFVAL { passive } ::= { fsDot11GlobeConfigGroup 5 } fsDot11ACCtrlTunnelSecSupport OBJECT-TYPE SYNTAX FsDot11TunnelSecSchemType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what security schemes are supported for CAPWAP Control tunnel." ::= { fsDot11GlobeConfigGroup 6 } fsDot11ACDataTunnelSecSupport OBJECT-TYPE SYNTAX FsDot11TunnelSecSchemType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme." DEFVAL { cleartxt } ::= { fsDot11GlobeConfigGroup 7 } fsDot11ACAutoAPSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled" DEFVAL { false } ::= { fsDot11GlobeConfigGroup 8 } fsDot11AutoAPName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the name of auto AP that needs to be made persistent. When read the value from the node, NULL value be returned." ::= { fsDot11GlobeConfigGroup 9 } fsDot11PersistentName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned." ::= { fsDot11GlobeConfigGroup 10 } fsDot11IntfTrapThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { fsDot11GlobeConfigGroup 11 } fsDot11MonitorInterval OBJECT-TYPE SYNTAX Unsigned32(0 | 5..15) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode." DEFVAL { 0 } ::= { fsDot11GlobeConfigGroup 12 } fsDot11SampleInterval OBJECT-TYPE SYNTAX Unsigned32(0 | 10..300) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the sampling interval. Default value 0 : The sampling functionality is disabled." DEFVAL { 0 } ::= { fsDot11GlobeConfigGroup 13 } fsDot11ChnlSwitChkInterval OBJECT-TYPE SYNTAX Unsigned32(8..180) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the checking interval of channel switch." DEFVAL { 8 } ::= { fsDot11GlobeConfigGroup 14 } fsDot11APUserUplimit OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of user which has access to this AP." ::= { fsDot11GlobeConfigGroup 15 } fsDot11APL2IsolateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled." DEFVAL { false } ::= { fsDot11GlobeConfigGroup 16 } fsDot11APBSSIDSupportNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the max number of BSSID supported by Current AP." ::= { fsDot11GlobeConfigGroup 17 } fsDot11APLastUpdateStatTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents date and time update statistic information lately." ::= { fsDot11GlobeConfigGroup 18 } fsDot11APDoSProtectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled." DEFVAL { false } ::= { fsDot11GlobeConfigGroup 19 } fsDot11MaxAPPerIf OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents max AP number that can be connected to AC interface." ::= { fsDot11GlobeConfigGroup 20 } fsDot11SampleTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the start time of current sample period." ::= { fsDot11GlobeConfigGroup 21 } fsDot11UplinkTrackId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled." DEFVAL { 0 } ::= { fsDot11GlobeConfigGroup 22 } fsDot11RtCollectSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, fsDot11RtCollectIntvl will take effect. Otherwise, fsDot11RglCollectIntvl will take effect." DEFVAL { false } ::= { fsDot11GlobeConfigGroup 23 } fsDot11RglCollectIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents interval to regularly collect statistics from AC to AP." ::= { fsDot11GlobeConfigGroup 24 } fsDot11RtCollectIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents interval to collect real-time statistics from AC to AP." ::= { fsDot11GlobeConfigGroup 25 } fsDot11AllAPCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU usage threshold for all AP." ::= { fsDot11GlobeConfigGroup 26 } fsDot11AllAPMemUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The memory usage threshold for all AP." ::= { fsDot11GlobeConfigGroup 27 } fsDot11AdjIntfTrapThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { fsDot11GlobeConfigGroup 28 } fsDot11AllAPMonitorMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents what work mode for All AP. The following values are supported: normal, - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { fsDot11GlobeConfigGroup 29 } fsDot11GlobalApFmwUpdState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically." DEFVAL { enable } ::= { fsDot11GlobeConfigGroup 30 } fsDot11ACNasIDCM OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the NAS-ID of current AC." ::= { fsDot11GlobeConfigGroup 31 } fsDot11ACRole OBJECT-TYPE SYNTAX INTEGER { normal(1), central(2), local(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current network status of AC. The following values are supported: normal, - normal ac. central - A central AC is an AC where local ACs are configured, and it establishes CAPWAP tunnels with the local ACs. local - Local ACs provide network access to APs and process client traffic. They are managed by the central AC." DEFVAL { normal } ::= { fsDot11GlobeConfigGroup 32 } fsDot11GlobalLocalACState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the status of local-ac for an AC. The following values are supported: enable - LocalAC state will be enabled. disable - LocalAC state will not be enabled." DEFVAL { disable } ::= { fsDot11GlobeConfigGroup 33 } fsDot11CentralACIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the CentralAC IP address of LocalAC." ::= { fsDot11GlobeConfigGroup 34 } fsDot11CentralACIPv6Address OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the CentralAC IPv6 address of LocalAC." ::= { fsDot11GlobeConfigGroup 35 } fsDot11iMcIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the iMc IP address." ::= { fsDot11GlobeConfigGroup 36 } fsDot11iMcPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the iMc Port." ::= { fsDot11GlobeConfigGroup 37 } fsDot11APProvisionSave OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Sends the provisioned configuration to APs. When you read from this node, the system returns NULL." ::= { fsDot11GlobeConfigGroup 38 } fsDot11ApRenameCurrentName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the current name of the AP that needs to be changed. When you read from the node, the system returns NULL." ::= { fsDot11GlobeConfigGroup 39 } fsDot11ApRenameNewName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the new name of the AP. When you read from the node, the system returns NULL." ::= { fsDot11GlobeConfigGroup 40 } fsDot11ACDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute will give more information about AC. Administrator could suggest the location, owner or other information for each AC. If the value is set to NULL, the description will be removed." ::= { fsDot11GlobeConfigGroup 41 } -- ***************************************************************************** -- * End of fsDot11GlobeConfigGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioPolicyTable Definition -- ***************************************************************************** fsDot11RadioPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP)." ::= { fsDot11PolicyConfigGroup 1 } fsDot11RadioPolicyEntry OBJECT-TYPE SYNTAX FsDot11RadioPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio policy." INDEX { IMPLIED fsDot11RadioPolicyName } ::= { fsDot11RadioPolicyTable 1 } FsDot11RadioPolicyEntry ::= SEQUENCE { fsDot11RadioPolicyName OCTET STRING, fsDot11BeaconInterval Integer32, fsDot11DtimInterval Integer32, fsDot11RtsThreshold Integer32, fsDot11FragThreshold Integer32, fsDot11ShortRetryThreshold Integer32, fsDot11LongRetryThreshold Integer32, fsDot11MaxRxLifetime Unsigned32, fsDot11RdoPolicyRowStatus RowStatus, fsDot11RdoClientMaxCount Integer32, fsDot11BeaconIntervalMs Integer32 } fsDot11RadioPolicyName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of radio policy." ::= { fsDot11RadioPolicyEntry 1 } fsDot11BeaconInterval OBJECT-TYPE SYNTAX Integer32 UNITS "TU" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for Beacon management frame." DEFVAL { 100 } ::= { fsDot11RadioPolicyEntry 2 } fsDot11DtimInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { fsDot11RadioPolicyEntry 3 } fsDot11RtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { fsDot11RadioPolicyEntry 4 } fsDot11FragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { fsDot11RadioPolicyEntry 5 } fsDot11ShortRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to fsDot11RTSThreshold, which shall be made before a failure condition is indicated." DEFVAL { 7 } ::= { fsDot11RadioPolicyEntry 6 } fsDot11LongRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is longer than fsDot11RTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 4 } ::= { fsDot11RadioPolicyEntry 7 } fsDot11MaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the elapsed time. After the time specified by fsDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated." DEFVAL { 2000 } ::= { fsDot11RadioPolicyEntry 8 } fsDot11RdoPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11RadioPolicyEntry 9 } fsDot11RdoClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represent the maximum number of stations supported by this radio policy." ::= { fsDot11RadioPolicyEntry 10 } fsDot11BeaconIntervalMs OBJECT-TYPE SYNTAX Integer32 UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for Beacon management frame." ::= { fsDot11RadioPolicyEntry 11 } -- ***************************************************************************** -- * End of fsDot11RadioPolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11ServicePolicyTable Definition -- ***************************************************************************** fsDot11ServicePolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11ServicePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP)." ::= { fsDot11PolicyConfigGroup 2 } fsDot11ServicePolicyEntry OBJECT-TYPE SYNTAX FsDot11ServicePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy." INDEX { fsDot11ServicePolicyID } ::= { fsDot11ServicePolicyTable 1 } FsDot11ServicePolicyEntry ::= SEQUENCE { fsDot11ServicePolicyID FsDot11ServicePolicyIDType, fsDot11SSIDName FsDot11SSIDStringType, fsDot11SSIDHidden TruthValue, fsDot11AuthenMode FsDot11AuthenType, fsDot11SSIDEncryptionMode FsDot11SSIDEncryptModeType, fsDot11WlanInfBindingType OCTET STRING, fsDot11WlanInfBindingID Integer32, fsDot11SrvPolicyRowStatus RowStatus, fsDot11ClientMaxCount Integer32, fsDot11SPInCirMode FsDot11CirMode, fsDot11SPInCirValue Integer32, fsDot11SPOutCirMode FsDot11CirMode, fsDot11SPOutCirValue Integer32, fsDot11WlanInfPVID Integer32, fsDot11SPInCirStaticValue Integer32, fsDot11SPOutCirStaticValue Integer32, fsDot11SPIsolate TruthValue, fsDot11WlanexAuthServerIP IpAddress, fsDot11SPBeaconMeasEnable TruthValue, fsDot11SPBeaconMeasType INTEGER, fsDot11SPBeaconMeasInterval Integer32, fsDot11AuthenModeCM INTEGER, fsDot11SecIEStatusCM INTEGER, fsDot11SecurityCiphersCM INTEGER, fsDot11SrvPolicyStatusCM INTEGER, fsDot11SSIDHiddenCM FsDot11TruthValueCM, fsDot11SPIsolateCM FsDot11TruthValueCM, fsDot11FwdVlanBitMapLow OCTET STRING, fsDot11FwdVlanBitMapHigh OCTET STRING, fsDot11ServicePolicyName OCTET STRING, fsDot11SecurityModeCM INTEGER, fsDot11SPInCbsValue Integer32, fsDot11SPOutCbsValue Integer32, fsDot11WlanInfCustomerPVID Integer32 } fsDot11ServicePolicyID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { fsDot11ServicePolicyEntry 1 } fsDot11SSIDName OBJECT-TYPE SYNTAX FsDot11SSIDStringType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the ESS. As per CLI, the value of service policy name will be SSID." ::= { fsDot11ServicePolicyEntry 2 } fsDot11SSIDHidden OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame." DEFVAL { false } ::= { fsDot11ServicePolicyEntry 3 } fsDot11AuthenMode OBJECT-TYPE SYNTAX FsDot11AuthenType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Authentication mode defined by 802.11." ::= { fsDot11ServicePolicyEntry 4 } fsDot11SSIDEncryptionMode OBJECT-TYPE SYNTAX FsDot11SSIDEncryptModeType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the encryption mode for this ESS." ::= { fsDot11ServicePolicyEntry 5 } fsDot11WlanInfBindingType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the service policy will bind to what kind of data forwarding interface." DEFVAL { "WLAN-ESS" } ::= { fsDot11ServicePolicyEntry 6 } fsDot11WlanInfBindingID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed." ::= { fsDot11ServicePolicyEntry 7 } fsDot11SrvPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11ServicePolicyEntry 8 } fsDot11ClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Represent the maximum number of stations supported by this service policy." ::= { fsDot11ServicePolicyEntry 9 } fsDot11SPInCirMode OBJECT-TYPE SYNTAX FsDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset." DEFVAL { static } ::= { fsDot11ServicePolicyEntry 10 } fsDot11SPInCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 11 } fsDot11SPOutCirMode OBJECT-TYPE SYNTAX FsDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset." DEFVAL { static } ::= { fsDot11ServicePolicyEntry 12 } fsDot11SPOutCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 13 } fsDot11WlanInfPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the VLAN ID of SSID." DEFVAL { 1 } ::= { fsDot11ServicePolicyEntry 14 } fsDot11SPInCirStaticValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of inbound direction for static CIR mode." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 15 } fsDot11SPOutCirStaticValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR of outbound direction for static CIR mode." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 16 } fsDot11SPIsolate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If it is true, then stations connected with the service policy are isolated." DEFVAL { false } ::= { fsDot11ServicePolicyEntry 17 } fsDot11WlanexAuthServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the IP address of the Wlanex Authentication server" ::= { fsDot11ServicePolicyEntry 18 } fsDot11SPBeaconMeasEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If it is true, then beacon-measurement is enabled." DEFVAL { false } ::= { fsDot11ServicePolicyEntry 19 } fsDot11SPBeaconMeasType OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2), beaconTable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beaconTable - BeaconMeasurement will use the beacon table type." DEFVAL { beaconTable } ::= { fsDot11ServicePolicyEntry 20 } fsDot11SPBeaconMeasInterval OBJECT-TYPE SYNTAX Integer32(10..200) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the beacon-measurement interval." DEFVAL { 60 } ::= { fsDot11ServicePolicyEntry 21 } fsDot11AuthenModeCM OBJECT-TYPE SYNTAX INTEGER { opensystem(0), sharedkey(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Authentication mode defined by 802.11." ::= { fsDot11ServicePolicyEntry 22 } fsDot11SecIEStatusCM OBJECT-TYPE SYNTAX INTEGER { none(0), wpa(1), wpa2(2), wlanex(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "To enable the security Information element in the beacon and probe response frames sent by AP." ::= { fsDot11ServicePolicyEntry 23 } fsDot11SecurityCiphersCM OBJECT-TYPE SYNTAX INTEGER { none(0), wep40(1), wep104(2), tkip(3), aesccmp(4), wpisms4(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation." ::= { fsDot11ServicePolicyEntry 24 } fsDot11SrvPolicyStatusCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the Service Policy." ::= { fsDot11ServicePolicyEntry 25 } fsDot11SSIDHiddenCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames." DEFVAL { dot11false } ::= { fsDot11ServicePolicyEntry 26 } fsDot11SPIsolateCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-create STATUS current DESCRIPTION "If it is dot11true, the clients connected with the service policy are isolated to each other." DEFVAL { dot11false } ::= { fsDot11ServicePolicyEntry 27 } fsDot11FwdVlanBitMapLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { fsDot11ServicePolicyEntry 28 } fsDot11FwdVlanBitMapHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { fsDot11ServicePolicyEntry 29 } fsDot11ServicePolicyName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the name of each service policy." ::= { fsDot11ServicePolicyEntry 30 } fsDot11SecurityModeCM OBJECT-TYPE SYNTAX INTEGER { none(0), psk(1), radius(2), wlanex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. none - The default value. No security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert." ::= { fsDot11ServicePolicyEntry 31 } fsDot11SPInCbsValue OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CBS of inbound direction of this service policy. If the value is 0, it means that the CBS is automatically calculated from the value of CIR." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 32 } fsDot11SPOutCbsValue OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CBS of outbound direction of this service policy. If the value is 0, it means that the CBS is automatically calculated from the value of CIR." DEFVAL { 0 } ::= { fsDot11ServicePolicyEntry 33 } fsDot11WlanInfCustomerPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the customer PVID." ::= { fsDot11ServicePolicyEntry 34 } -- ***************************************************************************** -- * End of fsDot11ServicePolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11ServicePolicyExtTable Definition -- ***************************************************************************** fsDot11ServicePolicyExtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11ServicePolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for ESS, as per service policy of CLI. When the value of fsDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table." ::= { fsDot11PolicyConfigGroup 3 } fsDot11ServicePolicyExtEntry OBJECT-TYPE SYNTAX FsDot11ServicePolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy under cipher(2) mode." INDEX { fsDot11ServicePolicyExtID } ::= { fsDot11ServicePolicyExtTable 1 } FsDot11ServicePolicyExtEntry ::= SEQUENCE { fsDot11ServicePolicyExtID FsDot11ServicePolicyIDType, fsDot11SecIEStatus FsDot11SecIEStatusType, fsDot11SecurityCiphers Integer32, fsDot11CipherKeyIndex Integer32, fsDot11CipherKey OCTET STRING, fsDot11SrvPolicyExtRowStatus RowStatus, fsDot11CipherKeyType INTEGER, fsDot11AkmMode INTEGER, fsDot11PskKey OCTET STRING } fsDot11ServicePolicyExtID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { fsDot11ServicePolicyExtEntry 1 } fsDot11SecIEStatus OBJECT-TYPE SYNTAX FsDot11SecIEStatusType MAX-ACCESS read-create STATUS current DESCRIPTION "To enable the security Information element in the beacon and probe response frames sent by AP." ::= { fsDot11ServicePolicyExtEntry 2 } fsDot11SecurityCiphers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same time. So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation." ::= { fsDot11ServicePolicyExtEntry 3 } fsDot11CipherKeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the key index of cipher key for packet. When fsDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective." DEFVAL { 1 } ::= { fsDot11ServicePolicyExtEntry 4 } fsDot11CipherKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cipher key for packet. When fsDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective." ::= { fsDot11ServicePolicyExtEntry 5 } fsDot11SrvPolicyExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11ServicePolicyExtEntry 6 } fsDot11CipherKeyType OBJECT-TYPE SYNTAX INTEGER { char(1), hex(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the cipher key type of fsDot11CipherKey." DEFVAL {1} ::= { fsDot11ServicePolicyExtEntry 7 } fsDot11AkmMode OBJECT-TYPE SYNTAX INTEGER { none(0), dot1x(1), psk(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication and key management mode." DEFVAL {0} ::= { fsDot11ServicePolicyExtEntry 8 } fsDot11PskKey OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the preshared key. This configuration takes effect if the fsDot11AkmMode value is psk." ::= { fsDot11ServicePolicyExtEntry 9 } -- ***************************************************************************** -- * End of fsDot11ServicePolicyExtTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioPolicyExtTable Definition -- ***************************************************************************** fsDot11RadioPolicyExtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioPolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy." ::= { fsDot11PolicyConfigGroup 4 } fsDot11RadioPolicyExtEntry OBJECT-TYPE SYNTAX FsDot11RadioPolicyExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio policy." INDEX { fsDot11RPAPSerialID, fsDot11RPRadioID } ::= { fsDot11RadioPolicyExtTable 1 } FsDot11RadioPolicyExtEntry ::= SEQUENCE { fsDot11RPAPSerialID OCTET STRING, fsDot11RPRadioID FsDot11RadioScopeType, fsDot11RPBeaconInterval Integer32, fsDot11RPDtimInterval Integer32, fsDot11RPRtsThreshold Integer32, fsDot11RPFragThreshold Integer32, fsDot11RPShortRetryThreshold Integer32, fsDot11RPLongRetryThreshold Integer32, fsDot11RPClientMaxCount Integer32, fsDot11RPBeaconIntervalCM Integer32 } fsDot11RPAPSerialID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Serial ID of AP." ::= { fsDot11RadioPolicyExtEntry 1 } fsDot11RPRadioID OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { fsDot11RadioPolicyExtEntry 2 } fsDot11RPBeaconInterval OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the interval for Beacon management frame." DEFVAL { 100 } ::= { fsDot11RadioPolicyExtEntry 3 } fsDot11RPDtimInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { fsDot11RadioPolicyExtEntry 4 } fsDot11RPRtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { fsDot11RadioPolicyExtEntry 5 } fsDot11RPFragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "byte" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { fsDot11RadioPolicyExtEntry 6 } fsDot11RPShortRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to fsDot11RTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 7 } ::= { fsDot11RadioPolicyExtEntry 7 } fsDot11RPLongRetryThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of transmission attempts of a frame, the length of which is longer than fsDot11RTSThreshold, and that shall be made before a failure condition is indicated." DEFVAL { 4 } ::= { fsDot11RadioPolicyExtEntry 8 } fsDot11RPClientMaxCount OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of stations supported by this radio policy." ::= { fsDot11RadioPolicyExtEntry 9 } fsDot11RPBeaconIntervalCM OBJECT-TYPE SYNTAX Integer32 UNITS "timeunit" MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents beacon interval." DEFVAL { 100 } ::= { fsDot11RadioPolicyExtEntry 10 } -- ***************************************************************************** -- * End of fsDot11RadioPolicyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11ServicePolicyPortSecurityTable Definition -- ***************************************************************************** fsDot11SrvPortSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11SrvPortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, fsPortSecurityTables should be used to configure port security." ::= { fsDot11PolicyConfigGroup 5 } fsDot11SrvPortSecurityEntry OBJECT-TYPE SYNTAX FsDot11SrvPortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for service policy." INDEX { fsDot11SecurityServicePolicyID } ::= { fsDot11SrvPortSecurityTable 1 } FsDot11SrvPortSecurityEntry ::= SEQUENCE { fsDot11SecurityServicePolicyID FsDot11ServicePolicyIDType, fsDot11SrvPortSecurityMode INTEGER, fsDot11SrvSecurityKeyType INTEGER, fsDot11SrvSecurityPskKeyMode INTEGER, fsDot11SrvSecurityPskKeyString DisplayString, fsDot11SrvPortSecurityModeCM INTEGER } fsDot11SecurityServicePolicyID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { fsDot11SrvPortSecurityEntry 1 } fsDot11SrvPortSecurityMode OBJECT-TYPE SYNTAX INTEGER { noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X). psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext Access to the port is denied until the port client is authenticated (by ext)." ::= { fsDot11SrvPortSecurityEntry 2 } fsDot11SrvSecurityKeyType OBJECT-TYPE SYNTAX INTEGER { userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption." ::= { fsDot11SrvPortSecurityEntry 3 } fsDot11SrvSecurityPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password input mode. When input as pskKeyModePassPhrase, fsDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, fsDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'." ::= { fsDot11SrvPortSecurityEntry 4 } fsDot11SrvSecurityPskKeyString OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password string used for psk authentication." ::= { fsDot11SrvPortSecurityEntry 5 } fsDot11SrvPortSecurityModeCM OBJECT-TYPE SYNTAX INTEGER { none(0), psk(1), radius(2), wlanex(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert." ::= { fsDot11SrvPortSecurityEntry 6 } fsDot11SrvL2AuthenTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11SrvL2AuthenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the Layer 2 authentication status of service templates." ::= { fsDot11PolicyConfigGroup 7 } fsDot11SrvL2AuthenEntry OBJECT-TYPE SYNTAX FsDot11SrvL2AuthenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row for a service template." INDEX { fsDot11SrvL2AuthenID } ::= { fsDot11SrvL2AuthenTable 1 } FsDot11SrvL2AuthenEntry ::= SEQUENCE { fsDot11SrvL2AuthenID FsDot11ServicePolicyIDType, fsDot11L2AuthenMode INTEGER, fsDot11L2IntrusProtectEnable TruthValue, fsDot11L2IntrusProtectOpt INTEGER, fsDot11TempServiceStopTimer Integer32, fsDot11TempBlockMACTimer Integer32, fsDot11L2IgnoreAuthorization TruthValue, fsDot11L2FailVLAN Integer32, fsDot11L2CriticalVLAN Integer32, fsDot11L2AuthorFailOffline TruthValue, fsDot11L2AccountFailOffline TruthValue, fsDot11Dot1xHSEnable TruthValue, fsDot11Dot1xSecureHSEnable TruthValue, fsDot11Dot1xReauthenEnable TruthValue, fsDot11Dot1xMandatoryDomain OCTET STRING, fsDot11Dot1xMaxUserCount Integer32, fsDot11MACAuthenDomain OCTET STRING, fsDot11MACAuthenMaxUserCount Integer32 } fsDot11SrvL2AuthenID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of a service template." ::= { fsDot11SrvL2AuthenEntry 1 } fsDot11L2AuthenMode OBJECT-TYPE SYNTAX INTEGER { bypass(1), macAuthentication(2), macThenDot1xAuthentication(3), dot1xAuthentication(4), dot1xThenMacAuthentication(5), ouiThenDot1x(6), macAndDot1x(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication mode of the service template. bypass No authentication is required. macAuthentication MAC authentication. macThenDot1xAuthentication MAC authentication is executed first. If MAC authentication fails, 802.1X authentication is executed. dot1xAuthentication Access to the port is denied until the client is authorized by 802.1X. dot1xThenMacAuthentication 802.1X authentication is executed first. If 802.1X authentication fails , MAC authentication is executed. ouiThenDot1x OUI authentication is first executed. If OUI authentication fails, 802.1X authentication is executed." ::= { fsDot11SrvL2AuthenEntry 2 } fsDot11L2IntrusProtectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables intrusion protection for the service template." ::= { fsDot11SrvL2AuthenEntry 3 } fsDot11L2IntrusProtectOpt OBJECT-TYPE SYNTAX INTEGER { blockMACTemporarily(1), stopServiceTemporarily(2), stopService(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation mode when intrusion is detected." ::= { fsDot11SrvL2AuthenEntry 4 } fsDot11TempServiceStopTimer OBJECT-TYPE SYNTAX Integer32(10..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Time period for temporarily stopping service." ::= { fsDot11SrvL2AuthenEntry 5 } fsDot11TempBlockMACTimer OBJECT-TYPE SYNTAX Integer32(60..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Time period for temporarily blocking user MACs." ::= { fsDot11SrvL2AuthenEntry 6 } fsDot11L2IgnoreAuthorization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ignores all authorization information set by the server." ::= { fsDot11SrvL2AuthenEntry 7 } fsDot11L2FailVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN for authentication failure. 0 means not configured." ::= { fsDot11SrvL2AuthenEntry 8 } fsDot11L2CriticalVLAN OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN for server unavailability situation. 0 means not configured." ::= { fsDot11SrvL2AuthenEntry 9 } fsDot11L2AuthorFailOffline OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Users are logged off if authorization fails." ::= { fsDot11SrvL2AuthenEntry 10 } fsDot11L2AccountFailOffline OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Users are logged off if accounting fails." ::= { fsDot11SrvL2AuthenEntry 11 } fsDot11Dot1xHSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables 802.1X handshake." ::= { fsDot11SrvL2AuthenEntry 12 } fsDot11Dot1xSecureHSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables secure 802.1X handshake." ::= { fsDot11SrvL2AuthenEntry 13 } fsDot11Dot1xReauthenEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables 802.1X reauthentication." ::= { fsDot11SrvL2AuthenEntry 14 } fsDot11Dot1xMandatoryDomain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "802.1X authentication domain of users for the service template." ::= { fsDot11SrvL2AuthenEntry 15 } fsDot11Dot1xMaxUserCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of 802.1X users supported by the BSS bound to the service template." ::= { fsDot11SrvL2AuthenEntry 16 } fsDot11MACAuthenDomain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "MAC authentication domain of users for the service template." ::= { fsDot11SrvL2AuthenEntry 17 } fsDot11MACAuthenMaxUserCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of MAC authentication users supported by the BSS bound to the service template." ::= { fsDot11SrvL2AuthenEntry 18 } -- ***************************************************************************** -- * End of fsDot11PortSecurityTable Definition -- ***************************************************************************** fsDot11IPLearningTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11IPLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the IP learning type and status of service templates." ::= { fsDot11PolicyConfigGroup 8 } fsDot11IPLearningEntry OBJECT-TYPE SYNTAX FsDot11IPLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about an IP learning entry." INDEX { fsDot11IPLearningServiceName, fsDot11IPLearningType } ::= { fsDot11IPLearningTable 1 } FsDot11IPLearningEntry ::= SEQUENCE { fsDot11IPLearningServiceName OCTET STRING, fsDot11IPLearningType INTEGER, fsDot11IPLearningStatus TruthValue, fsDot11IPLearningVlanBitMapL OCTET STRING, fsDot11IPLearningVlanBitMapH OCTET STRING } fsDot11IPLearningServiceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the service name." ::= { fsDot11IPLearningEntry 1 } fsDot11IPLearningType OBJECT-TYPE SYNTAX INTEGER { invalid(1), arp(2), dhcp(3), dhcp6(4), nd(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the IP learning type." ::= { fsDot11IPLearningEntry 2 } fsDot11IPLearningStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the ip learning status of the interface. Setting this attribute to true enables IP learning on the interface." ::= { fsDot11IPLearningEntry 3 } fsDot11IPLearningVlanBitMapL OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8 and the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1', that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { fsDot11IPLearningEntry 4 } fsDot11IPLearningVlanBitMapH OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8 and the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1', that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { fsDot11IPLearningEntry 5 } -- ***************************************************************************** -- * fsDot11SrvPolicyExtendTable Definition -- ***************************************************************************** fsDot11SrvPolicyExtendTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11SrvPolicyExtendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters of each service policy." ::= { fsDot11PolicyConfigGroup 6 } fsDot11SrvPolicyExtendEntry OBJECT-TYPE SYNTAX FsDot11SrvPolicyExtendEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each service policy." INDEX { fsDot11ServicePolicyID } ::= { fsDot11SrvPolicyExtendTable 1 } FsDot11SrvPolicyExtendEntry ::= SEQUENCE { fsDot11SPEnable INTEGER } fsDot11SPEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the service policy is enabled." ::= { fsDot11SrvPolicyExtendEntry 1 } -- ***************************************************************************** -- * End of fsDot11ServicePolicyExtendTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APTemplateTable Definition -- ***************************************************************************** fsDot11APTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by fsDot11APSerialID information in AP template." ::= { fsDot11APConfigGroup 1 } fsDot11APTemplateEntry OBJECT-TYPE SYNTAX FsDot11APTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each AP." INDEX { fsDot11APTemplateName } ::= { fsDot11APTemplateTable 1 } FsDot11APTemplateEntry ::= SEQUENCE { fsDot11APTemplateName OCTET STRING, fsDot11APSerialID OCTET STRING, fsDot11TemplateAPModelAlias OCTET STRING, fsDot11Description OCTET STRING, fsDot11APWorkMode INTEGER, fsDot11APTemplateRowStatus RowStatus, fsDot11APName OCTET STRING, fsDot11StatisInterv Integer32, fsDot11APBroadcastProbeReply TruthValue, fsDot11StaIdleTimerInterv Integer32, fsDot11StaKeepAliveTimerInterv Integer32, fsDot11APCir Integer32, fsDot11APCbs Integer32, fsDot11APPriorityLevel Integer32, fsDot11APElementID Integer32, fsDot11APDevDetectEnable TruthValue, fsDot11APGetIPMethod INTEGER, fsDot11StatisIntervMode INTEGER, fsDot11ApTrapEnabled TruthValue, fsDot11ApFmwUpdState INTEGER, fsDot11StatisIntervModeCM INTEGER, fsDot11ApNasIDCM OCTET STRING, fsDot11ApCoveragetype INTEGER, fsDot11APControlAddressState INTEGER, fsDot11APControlAddressIPv4 IpAddress, fsDot11APControlAddressIPv6 OCTET STRING, fsDot11APLocalACName OCTET STRING, fsDot11APEchoInterval Integer32, fsDot11APProvisionAPIPv4 IpAddress, fsDot11APProvisionIPv4Mask Integer32, fsDot11APProvisionAPIPv6 OCTET STRING, fsDot11APProvisionIPv6PrefixLen Integer32, fsDot11APProvisionACIPv4 IpAddress, fsDot11APProvisionACIpv6 OCTET STRING, fsDot11APProvisionGateWayIPV4 IpAddress, fsDot11APProvisionGateWayIPV6 OCTET STRING, fsDot11APMapConfigFileName OCTET STRING } fsDot11APTemplateName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of AP template." ::= { fsDot11APTemplateEntry 1 } fsDot11APSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents AP serial id." ::= { fsDot11APTemplateEntry 2 } fsDot11TemplateAPModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the alias of AP model name." ::= { fsDot11APTemplateEntry 3 } fsDot11Description OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed." ::= { fsDot11APTemplateEntry 4 } fsDot11APWorkMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { fsDot11APTemplateEntry 5 } fsDot11APTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11APTemplateEntry 6 } fsDot11APName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the AP name." ::= { fsDot11APTemplateEntry 7 } fsDot11StatisInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of radio statistic." ::= { fsDot11APTemplateEntry 8 } fsDot11APBroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { fsDot11APTemplateEntry 9 } fsDot11StaIdleTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { fsDot11APTemplateEntry 10 } fsDot11StaKeepAliveTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA." ::= { fsDot11APTemplateEntry 11 } fsDot11APCir OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed information rate between AP and AC." ::= { fsDot11APTemplateEntry 12 } fsDot11APCbs OBJECT-TYPE SYNTAX Integer32 UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed burst size between AP and AC." ::= { fsDot11APTemplateEntry 13 } fsDot11APPriorityLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP." DEFVAL { 4 } ::= { fsDot11APTemplateEntry 14 } fsDot11APElementID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AP element ID." ::= { fsDot11APTemplateEntry 15 } fsDot11APDevDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object fsDot11APWorkMode is monitor, device detection cannot be enabled with object fsDot11APDevDetectEnable." DEFVAL { false } ::= { fsDot11APTemplateEntry 16 } fsDot11APGetIPMethod OBJECT-TYPE SYNTAX INTEGER { dhcpAlloc(1), static(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the method how AP gets IP address." DEFVAL { dhcpAlloc } ::= { fsDot11APTemplateEntry 17 } fsDot11StatisIntervMode OBJECT-TYPE SYNTAX INTEGER { normal(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statics interval. normal - statics interval value between 10s to 240s realtime - statics interval value between 0s to 5s" DEFVAL { normal } ::= { fsDot11APTemplateEntry 18 } fsDot11ApTrapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status." DEFVAL { true } ::= { fsDot11APTemplateEntry 19 } fsDot11ApFmwUpdState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), inherit(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The status will inherit value from apgroup-view or system-view." DEFVAL { inherit } ::= { fsDot11APTemplateEntry 20 } fsDot11StatisIntervModeCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statistic interval. off - statistic interval value between 10s to 240s on - statistic interval value between 0s to 5s" DEFVAL { off } ::= { fsDot11APTemplateEntry 21 } fsDot11ApNasIDCM OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the NAS-ID of current service policy for each specific radio of AP." ::= { fsDot11APTemplateEntry 22 } fsDot11ApCoveragetype OBJECT-TYPE SYNTAX INTEGER { school(1), traffic(2), shopping(3), company(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the coverage type of AP. school - the coverage type is school traffic - the coverage type is traffic shop - the coverage type is shop company - the coverage type is company" DEFVAL { school } ::= { fsDot11APTemplateEntry 23 } fsDot11APControlAddressState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the status of control address for an AP. The following values are supported: enable - AC rediscovery will be enabled. disable - AC rediscovery will be disabled." DEFVAL { disable } ::= { fsDot11APTemplateEntry 24 } fsDot11APControlAddressIPv4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Represents an AC IPv4 address for AC rediscovery." ::= { fsDot11APTemplateEntry 25 } fsDot11APControlAddressIPv6 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents an AC IPv6 address for AC rediscovery." ::= { fsDot11APTemplateEntry 26 } fsDot11APLocalACName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the local AC name the AP belongs to." ::= { fsDot11APTemplateEntry 27 } fsDot11APEchoInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the echo-interval of the AP." ::= { fsDot11APTemplateEntry 28 } fsDot11APProvisionAPIPv4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the IPv4 address of an AP." ::= { fsDot11APTemplateEntry 29 } fsDot11APProvisionIPv4Mask OBJECT-TYPE SYNTAX Integer32(1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the IPv4 address mask of an AP." ::= { fsDot11APTemplateEntry 30 } fsDot11APProvisionAPIPv6 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the IPv6 address of an AP." ::= { fsDot11APTemplateEntry 31 } fsDot11APProvisionIPv6PrefixLen OBJECT-TYPE SYNTAX Integer32(1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the IPv6 address prefix length of an AP." ::= { fsDot11APTemplateEntry 32 } fsDot11APProvisionACIPv4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents an AC IPv4 address for discovery." ::= { fsDot11APTemplateEntry 33 } fsDot11APProvisionACIpv6 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents an AC IPv6 address for discovery." ::= { fsDot11APTemplateEntry 34 } fsDot11APProvisionGateWayIPV4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the gateway IPv4 address for an AP." ::= { fsDot11APTemplateEntry 35 } fsDot11APProvisionGateWayIPV6 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents thre gateway IPv6 address for an AP." ::= { fsDot11APTemplateEntry 36 } fsDot11APMapConfigFileName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the name of the AP MapConfigFile." ::= { fsDot11APTemplateEntry 37 } -- ***************************************************************************** -- * End of fsDot11APTemplateTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioToConfigTable Definition -- ***************************************************************************** fsDot11RadioToConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioToConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Before AP connects to AC, administrator will configure radio parameter to each radio." ::= { fsDot11APConfigGroup 2 } fsDot11RadioToConfigEntry OBJECT-TYPE SYNTAX FsDot11RadioToConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each radio." INDEX { fsDot11APTemplateNameCfg, fsDot11CfgRadioID } ::= { fsDot11RadioToConfigTable 1 } FsDot11RadioToConfigEntry ::= SEQUENCE { fsDot11APTemplateNameCfg OCTET STRING, fsDot11CfgRadioID FsDot11RadioScopeType, fsDot11CfgRadioPolicyName OCTET STRING, fsDot11CfgRadioType FsDot11RadioType, fsDot11CfgChannel FsDot11ChannelScopeType, fsDot11CfgMaxTxPowerLevel FsDot11TxPwrLevelScopeType, fsDot11PreambleLen FsDot11PreambleType, fsDot11CfgRadioStatus TruthValue, fsDot11CfgRdElementID Unsigned32, fsDot11CfgWorkMode FsDot11WorkMode, fsDot11CfgPwrAttValue Integer32, fsDot11RadioTxArithmetic INTEGER, fsDot11CfgChannelLockStat INTEGER, fsDot11CfgPowerLockStat INTEGER, fsDot11CfgLBRdGroupId Unsigned32, fsDot11CfgRRMSDRdGroupId Unsigned32, fsDot11CfgRadioType2 FsDot11RadioType2, fsDot11CfgIDSEnable TruthValue, fsDot11CfgSaEnable TruthValue, fsDot11CfgSaCltRtFFTData TruthValue, fsDot11CfgSaBand INTEGER, fsDot11CfgSaRptDevType BITS, fsDot11CfgSaTrapDevEnable TruthValue, fsDot11CfgSaTrapDevType BITS, fsDot11CfgSaTrapAQEnable TruthValue, fsDot11CfgSaTrapAQThreshold Integer32, fsDot11CfgSaDrivenRRMEnable TruthValue, fsDot11CfgSaDrivenRRMSnt INTEGER, fsDot11CfgSPInCirMode FsDot11CirMode, fsDot11CfgSPInCirValue Integer32, fsDot11CfgSPOutCirMode FsDot11CirMode, fsDot11CfgSPOutCirValue Integer32 } fsDot11APTemplateNameCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of AP template." ::= { fsDot11RadioToConfigEntry 1 } fsDot11CfgRadioID OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents each radio." ::= { fsDot11RadioToConfigEntry 2 } fsDot11CfgRadioPolicyName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the name of radio policy." ::= { fsDot11RadioToConfigEntry 3 } fsDot11CfgRadioType OBJECT-TYPE SYNTAX FsDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioToConfigEntry 4 } fsDot11CfgChannel OBJECT-TYPE SYNTAX FsDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the channel allocation of radio." ::= { fsDot11RadioToConfigEntry 5 } fsDot11CfgMaxTxPowerLevel OBJECT-TYPE SYNTAX FsDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { fsDot11RadioToConfigEntry 6 } fsDot11PreambleLen OBJECT-TYPE SYNTAX FsDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether use long or short preamble for 802.11 MAC frame. When fsDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for fsDot11PreambleLen will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { fsDot11RadioToConfigEntry 7 } fsDot11CfgRadioStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { fsDot11RadioToConfigEntry 8 } fsDot11CfgRdElementID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID." ::= { fsDot11RadioToConfigEntry 9 } fsDot11CfgWorkMode OBJECT-TYPE SYNTAX FsDot11WorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "Represents work mode of the radio." ::= { fsDot11RadioToConfigEntry 10 } fsDot11CfgPwrAttValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the value of power attenuation." ::= { fsDot11RadioToConfigEntry 11 } fsDot11RadioTxArithmetic OBJECT-TYPE SYNTAX INTEGER { quality(1), bandwidth(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission." DEFVAL { quality } ::= { fsDot11RadioToConfigEntry 12 } fsDot11CfgChannelLockStat OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents locked status of channel on the radio." DEFVAL { unlocked } ::= { fsDot11RadioToConfigEntry 13 } fsDot11CfgPowerLockStat OBJECT-TYPE SYNTAX INTEGER { unlocked(1), locked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents locked status of power on the radio." DEFVAL { unlocked } ::= { fsDot11RadioToConfigEntry 14 } fsDot11CfgLBRdGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the load balance group ID allocated for the radio." ::= { fsDot11RadioToConfigEntry 15 } fsDot11CfgRRMSDRdGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the RRM self-decisive group ID allocated for the radio." ::= { fsDot11RadioToConfigEntry 16 } fsDot11CfgRadioType2 OBJECT-TYPE SYNTAX FsDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioToConfigEntry 17 } fsDot11CfgIDSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether intrusion detection is enabled for this radio." ::= { fsDot11RadioToConfigEntry 18 } fsDot11CfgSaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether spectrum analysis is enabled." ::= { fsDot11RadioToConfigEntry 19 } fsDot11CfgSaCltRtFFTData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether to collect real-time FFT data for this radio." ::= { fsDot11RadioToConfigEntry 20 } fsDot11CfgSaBand OBJECT-TYPE SYNTAX INTEGER{ dot11g(1), dot11aLower(2), dot11aMiddle(3), dot11aUpper(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the following channels. dot11g (Channels 1-14) dot11aLower (channels 36-64) dot11aMiddle (channels 100-140) dot11aUpper (channels 149-165)." ::= { fsDot11RadioToConfigEntry 21 } fsDot11CfgSaRptDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11), freqHopperCordlessNetwork5g(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which types of interference devices should be reported." ::= { fsDot11RadioToConfigEntry 22 } fsDot11CfgSaTrapDevEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether trap is enabled for an interference device type." ::= { fsDot11RadioToConfigEntry 23 } fsDot11CfgSaTrapDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11), freqHopperCordlessNetwork5g(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents for which interference device types the AP will send traps when trap sending is enabled." ::= { fsDot11RadioToConfigEntry 24 } fsDot11CfgSaTrapAQEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the channel quality trap is enabled." ::= { fsDot11RadioToConfigEntry 25 } fsDot11CfgSaTrapAQThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the channel quality threshold. When the channel quality is below this value, the channel quality trap will be sent." ::= { fsDot11RadioToConfigEntry 26 } fsDot11CfgSaDrivenRRMEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configures whether to run RRM when the AP detects a certain level of interference." ::= { fsDot11RadioToConfigEntry 27 } fsDot11CfgSaDrivenRRMSnt OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the threshold for triggering RRM. When the interference level for the AP exceeds the threshold , RRM initiates local dynamic frequency selection (DFS) and changes the channel of the affected radio to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity." ::= { fsDot11RadioToConfigEntry 28 } fsDot11CfgSPInCirMode OBJECT-TYPE SYNTAX FsDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the committed information rate(CIR) mode for the inbound direction. This object is useful only when the corresponding CIR has a nonzero value. If the value of this object is changed, the corresponding CIR will be reset." DEFVAL { static } ::= { fsDot11RadioToConfigEntry 29 } fsDot11CfgSPInCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR for the inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { fsDot11RadioToConfigEntry 30 } fsDot11CfgSPOutCirMode OBJECT-TYPE SYNTAX FsDot11CirMode MAX-ACCESS read-create STATUS current DESCRIPTION " Represents the committed information rate(CIR) mode for the outbound direction. This object is useful only when the corresponding CIR has a nonzero value. If the value of this object is changed, the corresponding CIR will be reset." DEFVAL { static } ::= { fsDot11RadioToConfigEntry 31 } fsDot11CfgSPOutCirValue OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the CIR for the outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless." DEFVAL { 0 } ::= { fsDot11RadioToConfigEntry 32 } -- ***************************************************************************** -- * End of fsDot11RadioToConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APServiceSetTable Definition -- ***************************************************************************** fsDot11APServiceSetTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APServiceSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies." ::= { fsDot11APConfigGroup 3 } fsDot11APServiceSetEntry OBJECT-TYPE SYNTAX FsDot11APServiceSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains service policy information for each specific radio of AP." INDEX { fsDot11APTemplateNameCfg, fsDot11CfgRadioID, fsDot11CfgServicePolicyID } ::= { fsDot11APServiceSetTable 1 } FsDot11APServiceSetEntry ::= SEQUENCE { fsDot11CfgServicePolicyID FsDot11ServicePolicyIDType, fsDot11SrvSetRowStatus RowStatus, fsDot11ServiceSetVlanId Integer32, fsDot11ServiceSetVlanGroup OCTET STRING } fsDot11CfgServicePolicyID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy used by the AP." ::= { fsDot11APServiceSetEntry 1 } fsDot11SrvSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11APServiceSetEntry 2 } fsDot11ServiceSetVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio." ::= { fsDot11APServiceSetEntry 3 } fsDot11ServiceSetVlanGroup OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the VLAN group of the BSS generated when a service policy is bound to the radio." ::= { fsDot11APServiceSetEntry 4 } -- ***************************************************************************** -- * End of fsDot11APServiceSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APSTVlanTable Definition -- ***************************************************************************** fsDot11APSTVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APSTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies." ::= { fsDot11APConfigGroup 11 } fsDot11APSTVlanEntry OBJECT-TYPE SYNTAX FsDot11APSTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains VLAN and service policy information for each specific radio of AP." INDEX { fsDot11SIDAPSerialID, fsDot11CfgRadioID, fsDot11CfgServicePolicyID } ::= { fsDot11APSTVlanTable 1 } FsDot11APSTVlanEntry ::= SEQUENCE { fsDot11CfgSTVLANID Integer32, fsDot11CfgSTNASPortID OCTET STRING, fsDot11CfgServiceSetRowStatus RowStatus, fsDot11CfgSTNASID OCTET STRING } fsDot11CfgSTVLANID OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the VLAN that current Service Policy have bind to." ::= { fsDot11APSTVlanEntry 1 } fsDot11CfgSTNASPortID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the NAS Port ID of current Service Policy for each specific radio of AP." ::= { fsDot11APSTVlanEntry 2 } fsDot11CfgServiceSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11APSTVlanEntry 3 } fsDot11CfgSTNASID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the NAS ID of current Service Policy for each specific radio of AP." ::= { fsDot11APSTVlanEntry 4 } -- ***************************************************************************** -- * End of fsDot11APSTVlanTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APSysInfoSetTable Definition -- ***************************************************************************** fsDot11APSysInfoSetTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APSysInfoSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the system information for each AP." ::= { fsDot11APConfigGroup 4 } fsDot11APSysInfoSetEntry OBJECT-TYPE SYNTAX FsDot11APSysInfoSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system information configuration for each AP." INDEX { fsDot11SIDAPSerialID } ::= { fsDot11APSysInfoSetTable 1 } FsDot11APSysInfoSetEntry ::= SEQUENCE { fsDot11APSysNetID OCTET STRING, fsDot11APCpuUsageThreshold Integer32, fsDot11APMemUsageThreshold Integer32 } fsDot11APSysNetID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the system Net ID for AP." ::= { fsDot11APSysInfoSetEntry 1 } fsDot11APCpuUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU usage threshold for AP." ::= { fsDot11APSysInfoSetEntry 2 } fsDot11APMemUsageThreshold OBJECT-TYPE SYNTAX Integer32(0..100) UNITS "onepercent" MAX-ACCESS read-write STATUS current DESCRIPTION "The memory usage threshold for AP." ::= { fsDot11APSysInfoSetEntry 3 } -- ***************************************************************************** -- * End of fsDot11APSysInfoSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APLimitTable Definition -- ***************************************************************************** fsDot11APLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s)." ::= { fsDot11APConfigGroup 5 } fsDot11APLimitEntry OBJECT-TYPE SYNTAX FsDot11APLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the limit information for each AP." INDEX { fsDot11APElementIndex } ::= { fsDot11APLimitTable 1 } FsDot11APLimitEntry ::= SEQUENCE { fsDot11APSsidNumLimit Integer32, fsDot11APUserCntLimit Integer32, fsDot11APUserThreshold Integer32 } fsDot11APSsidNumLimit OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP." DEFVAL { 0 } ::= { fsDot11APLimitEntry 1 } fsDot11APUserCntLimit OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP." DEFVAL { 0 } ::= { fsDot11APLimitEntry 2 } fsDot11APUserThreshold OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP." DEFVAL { 0 } ::= { fsDot11APLimitEntry 3 } -- ***************************************************************************** -- * End of fsDot11APLimitTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APIfSetTable Definition -- ***************************************************************************** fsDot11APIfSetTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APIfSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the interface information for each AP." ::= { fsDot11APConfigGroup 6 } fsDot11APIfSetEntry OBJECT-TYPE SYNTAX FsDot11APIfSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface information configuration for each AP." INDEX { fsDot11APElementIndex, fsDot11APSetIfIndex } ::= { fsDot11APIfSetTable 1 } FsDot11APIfSetEntry ::= SEQUENCE { fsDot11APSetIfIndex Integer32, fsDot11APIfAlias DisplayString } fsDot11APSetIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the index for a interface." ::= { fsDot11APIfSetEntry 1 } fsDot11APIfAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object is an 'alias' name for the interface as specified by a network manager for AP." ::= { fsDot11APIfSetEntry 2 } -- ***************************************************************************** -- * End of fsDot11APIfSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11APServiceVlanTable Definition -- ***************************************************************************** fsDot11APServiceVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APServiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies." ::= { fsDot11APConfigGroup 7 } fsDot11APServiceVlanEntry OBJECT-TYPE SYNTAX FsDot11APServiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains service policy information for each AP." INDEX { fsDot11APServiceVlanSerialID, fsDot11APServiceVlanSPID } ::= { fsDot11APServiceVlanTable 1 } FsDot11APServiceVlanEntry ::= SEQUENCE { fsDot11APServiceVlanSerialID OCTET STRING, fsDot11APServiceVlanSPID FsDot11ServicePolicyIDType, fsDot11APServiceVlanId Integer32, fsDot11APServiceVlanRowStatus RowStatus } fsDot11APServiceVlanSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents AP serial id." ::= { fsDot11APServiceVlanEntry 1 } fsDot11APServiceVlanSPID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the ID of each service policy used by the AP." ::= { fsDot11APServiceVlanEntry 2 } fsDot11APServiceVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio." ::= { fsDot11APServiceVlanEntry 3 } fsDot11APServiceVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the status of this table entry." ::= { fsDot11APServiceVlanEntry 4 } -- ***************************************************************************** -- * End of fsDot11APServiceSetTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioConfigTable Definition -- ***************************************************************************** fsDot11RadioConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Before AP connects to AC, administrator will configure radio parameter to each radio." ::= { fsDot11APConfigGroup 8 } fsDot11RadioConfigEntry OBJECT-TYPE SYNTAX FsDot11RadioConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each radio." INDEX { fsDot11RCAPSerialID, fsDot11RCRadioID } ::= { fsDot11RadioConfigTable 1 } FsDot11RadioConfigEntry ::= SEQUENCE { fsDot11RCAPSerialID OCTET STRING, fsDot11RCRadioID FsDot11RadioScopeType, fsDot11RCRadioType FsDot11RadioType, fsDot11RCChannel FsDot11ChannelScopeType, fsDot11RCPreambleLen FsDot11PreambleType, fsDot11RCPwrAttValue Integer32, fsDot11RCApPowerLevel FsDot11TxPwrLevelScopeType, fsDot11RCDynamicChlState TruthValue, fsDot11RCDynamicPowerState TruthValue, fsDot11RCRadioStatus TruthValue, fsDot11RCRadioRate OCTET STRING, fsDot11RCPwrAdjustStepLength Integer32, fsDot11RCRadioType2 FsDot11RadioType2, fsDot11RCPreambleLenCM INTEGER, fsDot11RCDynamicChlStateCM INTEGER, fsDot11RCRadioStatusCM INTEGER, fsDot11RCRadioRateCM OCTET STRING, fsDot11RCDynamicPowerStateCM FsDot11TruthValueCM, fsDot11RCRssiThresholdCM Integer32, fsDot11RCDynamicChlStateSelfDecisiveCM FsDot11TruthValueCM, fsDot11RCDynamicPowerStateSelfDecisiveCM FsDot11TruthValueCM } fsDot11RCAPSerialID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Serial ID of AP." ::= { fsDot11RadioConfigEntry 1 } fsDot11RCRadioID OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { fsDot11RadioConfigEntry 2 } fsDot11RCRadioType OBJECT-TYPE SYNTAX FsDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioConfigEntry 3 } fsDot11RCChannel OBJECT-TYPE SYNTAX FsDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the channel allocation of radio." ::= { fsDot11RadioConfigEntry 4 } fsDot11RCPreambleLen OBJECT-TYPE SYNTAX FsDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents whether use long or short preamble for 802.11 MAC frame. When fsDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for fsDot11PreambleLen will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { fsDot11RadioConfigEntry 5 } fsDot11RCPwrAttValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the value of power attenuation." ::= { fsDot11RadioConfigEntry 6 } fsDot11RCApPowerLevel OBJECT-TYPE SYNTAX FsDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { fsDot11RadioConfigEntry 7 } fsDot11RCDynamicChlState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic channel selection." ::= { fsDot11RadioConfigEntry 8 } fsDot11RCDynamicPowerState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic power selection for the band." ::= { fsDot11RadioConfigEntry 9 } fsDot11RCRadioStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { fsDot11RadioConfigEntry 10 } fsDot11RCRadioRate OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)" ::= { fsDot11RadioConfigEntry 11 } fsDot11RCPwrAdjustStepLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Power adjustment step-length in dBm." ::= { fsDot11RadioConfigEntry 12 } fsDot11RCRadioType2 OBJECT-TYPE SYNTAX FsDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioConfigEntry 13 } fsDot11RCPreambleLenCM OBJECT-TYPE SYNTAX INTEGER { long(0), short(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents whether use long or short preamble for 802.11 MAC frame. When fsDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for fsDot11PreambleLenCM will be valid. Otherwise, the value for it will be invalid." DEFVAL { short } ::= { fsDot11RadioConfigEntry 14 } fsDot11RCDynamicChlStateCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic channel selection." ::= { fsDot11RadioConfigEntry 15 } fsDot11RCRadioStatusCM OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio admin status whether is enabled or disabled." ::= { fsDot11RadioConfigEntry 16 } fsDot11RCRadioRateCM OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)" ::= { fsDot11RadioConfigEntry 17 } fsDot11RCDynamicPowerStateCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable dynamic power selection for the band." ::= { fsDot11RadioConfigEntry 18 } fsDot11RCRssiThresholdCM OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate." DEFVAL { 1 } ::= { fsDot11RadioConfigEntry 19 } fsDot11RCDynamicChlStateSelfDecisiveCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable dynamic channel selection self decisive for the band." ::= { fsDot11RadioConfigEntry 20 } fsDot11RCDynamicPowerStateSelfDecisiveCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable dynamic power selection self decisive for the band." ::= { fsDot11RadioConfigEntry 21 } -- ***************************************************************************** -- * End of fsDot11RadioConfigTable Definition -- ***************************************************************************** fsDot11RadioSSIDCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioSSIDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies." ::= { fsDot11APConfigGroup 9 } fsDot11RadioSSIDCfgEntry OBJECT-TYPE SYNTAX FsDot11RadioSSIDCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains SSID configuration information for each radio." INDEX { fsDot11RadioSSIDSerialID, fsDot11RadioSSIDRadioID, fsDot11RadioSSIDWLANID } ::= { fsDot11RadioSSIDCfgTable 1 } FsDot11RadioSSIDCfgEntry ::= SEQUENCE { fsDot11RadioSSIDSerialID FsDot11ObjectIDType, fsDot11RadioSSIDRadioID FsDot11RadioScopeType, fsDot11RadioSSIDWLANID Integer32, fsDot11RadioSSIDIndex FsDot11ServicePolicyIDType, fsDot11RadioBSSID MacAddress, fsDot11RadioSSIDRowStatus RowStatus } fsDot11RadioSSIDSerialID OBJECT-TYPE SYNTAX FsDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the serial ID of AP." ::= { fsDot11RadioSSIDCfgEntry 1 } fsDot11RadioSSIDRadioID OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents each radio." ::= { fsDot11RadioSSIDCfgEntry 2 } fsDot11RadioSSIDWLANID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the WLAN ID of the BSSID." ::= { fsDot11RadioSSIDCfgEntry 3 } fsDot11RadioSSIDIndex OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the ID of each service policy used by the radio." ::= { fsDot11RadioSSIDCfgEntry 4 } fsDot11RadioBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "As MAC address format, it is used to identify BSS." ::= { fsDot11RadioSSIDCfgEntry 5 } fsDot11RadioSSIDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { fsDot11RadioSSIDCfgEntry 6 } -- ***************************************************************************** -- * fsDot11APSerialIDTable Definition -- ***************************************************************************** fsDot11APSerialIDTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11APSerialIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table will provide the general information about APs." ::= { fsDot11APConfigGroup 10 } fsDot11APSerialIDEntry OBJECT-TYPE SYNTAX FsDot11APSerialIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the general information of an AP." INDEX { fsDot11SIDAPSerialID } ::= { fsDot11APSerialIDTable 1 } FsDot11APSerialIDEntry ::= SEQUENCE { fsDot11SIDAPSerialID OCTET STRING, fsDot11SIDAPWorkMode INTEGER, fsDot11SIDAPGetIPMethod INTEGER, fsDot11SIDAPTemplateName OCTET STRING, fsDot11SIDModelAlias OCTET STRING, fsDot11SIDAPDescription OCTET STRING, fsDot11SIDRowStatus RowStatus, fsDot11SIDAPName OCTET STRING, fsDot11SIDStatisInterv Integer32, fsDot11SIDAPBroadcastProbeReply TruthValue, fsDot11SIDAPStaIdleTimerInterv Integer32, fsDot11SIDStaKeepAliveTimerInterv Integer32, fsDot11SIDAPCir Integer32, fsDot11SIDAPCbs Integer32, fsDot11SIDAPPriorityLevel Integer32, fsDot11SIDAPElementID Integer32, fsDot11SIDAPDevDetectEnable TruthValue, fsDot11SIDAPStatisIntervMode INTEGER, fsDot11SIDAPWorkModeCM INTEGER, fsDot11SIDEchoInterval Integer32 } fsDot11SIDAPSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents AP serial id." ::= { fsDot11APSerialIDEntry 1 } fsDot11SIDAPWorkMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { fsDot11APSerialIDEntry 2 } fsDot11SIDAPGetIPMethod OBJECT-TYPE SYNTAX INTEGER { dhcpAlloc(1), static(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the method how AP gets IP address." DEFVAL { dhcpAlloc } ::= { fsDot11APSerialIDEntry 3 } fsDot11SIDAPTemplateName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the name of AP template." ::= { fsDot11APSerialIDEntry 4 } fsDot11SIDModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the alias of AP model name." ::= { fsDot11APSerialIDEntry 5 } fsDot11SIDAPDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed." ::= { fsDot11APSerialIDEntry 6 } fsDot11SIDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11APSerialIDEntry 7 } fsDot11SIDAPName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the AP name." ::= { fsDot11APSerialIDEntry 8 } fsDot11SIDStatisInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of radio statistic." ::= { fsDot11APSerialIDEntry 9 } fsDot11SIDAPBroadcastProbeReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled" DEFVAL { true } ::= { fsDot11APSerialIDEntry 10 } fsDot11SIDAPStaIdleTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle." ::= { fsDot11APSerialIDEntry 11 } fsDot11SIDStaKeepAliveTimerInterv OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of the keep alive requests sent between AP and STA." ::= { fsDot11APSerialIDEntry 12 } fsDot11SIDAPCir OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed information rate between AP and AC." ::= { fsDot11APSerialIDEntry 13 } fsDot11SIDAPCbs OBJECT-TYPE SYNTAX Integer32 UNITS "Bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the committed burst size between AP and AC." ::= { fsDot11APSerialIDEntry 14 } fsDot11SIDAPPriorityLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP." DEFVAL { 4 } ::= { fsDot11APSerialIDEntry 15 } fsDot11SIDAPElementID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the AP element ID." ::= { fsDot11APSerialIDEntry 16 } fsDot11SIDAPDevDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object fsDot11APWorkMode is monitor, device detection can not be enabled with object fsDot11SIDAPDevDetectEnable." DEFVAL { false } ::= { fsDot11APSerialIDEntry 17 } fsDot11SIDAPStatisIntervMode OBJECT-TYPE SYNTAX INTEGER { normal(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mode of statics interval. normal - statics interval value between 10s to 240s realtime - statics interval value between 0s to 5s" DEFVAL { normal } ::= { fsDot11APSerialIDEntry 18 } fsDot11SIDAPWorkModeCM OBJECT-TYPE SYNTAX INTEGER { normal(0), monitor(1), semimonitor(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detection is enabled." DEFVAL { normal } ::= { fsDot11APSerialIDEntry 19 } fsDot11SIDEchoInterval OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval for send echo requests." ::= { fsDot11APSerialIDEntry 20 } -- ***************************************************************************** -- * fsDot11RadioIntfConfigTable Definition -- ***************************************************************************** fsDot11RadioIntfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for radio in AP, as per radio." ::= { fsDot11RadioIntfConfigGroup 1 } fsDot11RadioIntfConfigEntry OBJECT-TYPE SYNTAX FsDot11RadioIntfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of each radio in AP." INDEX { fsDot11RadioIfIdx } ::= { fsDot11RadioIntfConfigTable 1 } FsDot11RadioIntfConfigEntry ::= SEQUENCE { fsDot11RadioIfIdx Integer32, fsDot11RadioCfgBeaconIntvl Integer32, fsDot11RadioCfgDtimIntvl Integer32, fsDot11RadioCfgRtsThreshold Integer32, fsDot11RadioCfgFragThreshold Integer32, fsDot11RadioCfgShtRetryThld Integer32, fsDot11RadioCfglongRtrThld Integer32, fsDot11RadioCfgMaxRxLifetime Unsigned32, fsDot11RadioCfgType FsDot11RadioType, fsDot11RadioCfgChannel FsDot11ChannelScopeType, fsDot11RadioCfgMaxTxPwrLvl FsDot11TxPwrLevelScopeType, fsDot11RadioCfgPreambleLen FsDot11PreambleType, fsDot11RadioCfgWorkMode FsDot11WorkMode, fsDot11RadioCfgOnly11gEnable TruthValue, fsDot11RadioCfgType2 FsDot11RadioType2, fsDot11RadioCfgRssithresholdCM Integer32 } fsDot11RadioIfIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the Radio IfIndex of radio in AP." ::= { fsDot11RadioIntfConfigEntry 1 } fsDot11RadioCfgBeaconIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "TU" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the interval for Beacon management frame." DEFVAL { 100 } ::= { fsDot11RadioIntfConfigEntry 2 } fsDot11RadioCfgDtimIntvl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames." DEFVAL { 1 } ::= { fsDot11RadioIntfConfigEntry 3 } fsDot11RadioCfgRtsThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "Byte" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed." DEFVAL { 2346 } ::= { fsDot11RadioIntfConfigEntry 4 } fsDot11RadioCfgFragThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "Byte" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers." DEFVAL { 2346 } ::= { fsDot11RadioIntfConfigEntry 5 } fsDot11RadioCfgShtRetryThld OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to fsDot11RadioRTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 5 } ::= { fsDot11RadioIntfConfigEntry 6 } fsDot11RadioCfglongRtrThld OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximum number of transmission attempts of a frame, the length of which is longer than fsDot11RadioRTSThreshold, that shall be made before a failure condition is indicated." DEFVAL { 5 } ::= { fsDot11RadioIntfConfigEntry 7 } fsDot11RadioCfgMaxRxLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the elapsed time. After the time specified by fsDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated." DEFVAL { 2000 } ::= { fsDot11RadioIntfConfigEntry 8 } fsDot11RadioCfgType OBJECT-TYPE SYNTAX FsDot11RadioType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioIntfConfigEntry 9 } fsDot11RadioCfgChannel OBJECT-TYPE SYNTAX FsDot11ChannelScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the channel allocation of radio." DEFVAL { 1 } ::= { fsDot11RadioIntfConfigEntry 10 } fsDot11RadioCfgMaxTxPwrLvl OBJECT-TYPE SYNTAX FsDot11TxPwrLevelScopeType UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the maximal transmit power scope for AP." ::= { fsDot11RadioIntfConfigEntry 11 } fsDot11RadioCfgPreambleLen OBJECT-TYPE SYNTAX FsDot11PreambleType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether use long or short preamble for 802.11 MAC frame." DEFVAL { short } ::= { fsDot11RadioIntfConfigEntry 12 } fsDot11RadioCfgWorkMode OBJECT-TYPE SYNTAX FsDot11WorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "Represents work mode of the radio." ::= { fsDot11RadioIntfConfigEntry 13 } fsDot11RadioCfgOnly11gEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled." DEFVAL { false } ::= { fsDot11RadioIntfConfigEntry 14 } fsDot11RadioCfgType2 OBJECT-TYPE SYNTAX FsDot11RadioType2 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the radio will work with which 802.11 radio type." ::= { fsDot11RadioIntfConfigEntry 15 } fsDot11RadioCfgRssithresholdCM OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate." DEFVAL { 1 } ::= { fsDot11RadioIntfConfigEntry 16 } -- ***************************************************************************** -- * End of fsDot11RadioIntfConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioIntfBindTable Definition -- ***************************************************************************** fsDot11RadioIntfBindTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioIntfBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the binding information for each radio in AP. " ::= { fsDot11RadioIntfConfigGroup 2 } fsDot11RadioIntfBindEntry OBJECT-TYPE SYNTAX FsDot11RadioIntfBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the radio interface binding information in AP." INDEX { fsDot11RadioIfIdx, fsDot11RadioIntfBindSvcPlcyID } ::= { fsDot11RadioIntfBindTable 1 } FsDot11RadioIntfBindEntry ::= SEQUENCE { fsDot11RadioIntfBindSvcPlcyID FsDot11ServicePolicyIDType, fsDot11RadioIntfBindIfIdx Unsigned32, fsDot11RadioIntfBindRowStatus RowStatus } fsDot11RadioIntfBindSvcPlcyID OBJECT-TYPE SYNTAX FsDot11ServicePolicyIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of each service policy." ::= { fsDot11RadioIntfBindEntry 1 } fsDot11RadioIntfBindIfIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the Ifindex of interface which is binded to the radio." ::= { fsDot11RadioIntfBindEntry 2 } fsDot11RadioIntfBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11RadioIntfBindEntry 3 } -- ***************************************************************************** -- * End of fsDot11RadioIntfBindTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11DataRateConfigTable Definition -- ***************************************************************************** fsDot11DataRateConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11DataRateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table will provide data rate configuration for a specific radio type." ::= { fsDot11DataRateConfigGroup 1 } fsDot11DataRateConfigEntry OBJECT-TYPE SYNTAX FsDot11DataRateConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry of the table will provide data rate configuration for a specific radio type." INDEX { fsDot11RadioTypeID } ::= { fsDot11DataRateConfigTable 1 } FsDot11DataRateConfigEntry ::= SEQUENCE { fsDot11RadioTypeID FsDot11RadioType, fsDot11SupportedRateSet OCTET STRING, fsDot11MandatoryRateSet OCTET STRING, fsDot11DisabledRateSet OCTET STRING, fsDot11SmartRateSet OCTET STRING } fsDot11RadioTypeID OBJECT-TYPE SYNTAX FsDot11RadioType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio type." ::= { fsDot11DataRateConfigEntry 1 } fsDot11SupportedRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the supported rate set of a particular radio type." ::= { fsDot11DataRateConfigEntry 2 } fsDot11MandatoryRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the mandatory rate set of a particular radio type." ::= { fsDot11DataRateConfigEntry 3 } fsDot11DisabledRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the disabled rate set of a particular radio type." ::= { fsDot11DataRateConfigEntry 4 } fsDot11SmartRateSet OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the rate set of a particular radio type." ::= { fsDot11DataRateConfigEntry 5 } -- ***************************************************************************** -- * End of fsDot11DataRateConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11WlanEssIfTable Definition -- ************************************************************************* fsDot11WlanEssIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11WlanEssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN ESS interface." ::= { fsDot11InterfaceConfigGroup 1 } fsDot11WlanEssIfEntry OBJECT-TYPE SYNTAX FsDot11WlanEssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN ESS interface configuration." INDEX { fsDot11WlanEssIfNumber } ::= { fsDot11WlanEssIfTable 1 } FsDot11WlanEssIfEntry ::= SEQUENCE { fsDot11WlanEssIfNumber Integer32, fsDot11WlanEssIfIndex Integer32, fsDot11WlanEssRowStatus RowStatus } fsDot11WlanEssIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN ESS interface number." ::= { fsDot11WlanEssIfEntry 1 } fsDot11WlanEssIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-ESS interface." ::= { fsDot11WlanEssIfEntry 2 } fsDot11WlanEssRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN ESS interface row status." ::= { fsDot11WlanEssIfEntry 3 } -- ***************************************************************************** -- * End of fsDot11WlanEssIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11WlanBssIfTable Definition -- ************************************************************************* fsDot11WlanBssIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11WlanBssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN BSS interface." ::= { fsDot11InterfaceConfigGroup 2 } fsDot11WlanBssIfEntry OBJECT-TYPE SYNTAX FsDot11WlanBssIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN BSS interface configuration." INDEX { fsDot11WlanBssIfNumber } ::= { fsDot11WlanBssIfTable 1 } FsDot11WlanBssIfEntry ::= SEQUENCE { fsDot11WlanBssIfNumber Integer32, fsDot11WlanBssIfIndex Integer32, fsDot11WlanBssRowStatus RowStatus } fsDot11WlanBssIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN BSS interface number." ::= { fsDot11WlanBssIfEntry 1 } fsDot11WlanBssIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-BSS interface." ::= { fsDot11WlanBssIfEntry 2 } fsDot11WlanBssRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN BSS interface row status." ::= { fsDot11WlanBssIfEntry 3 } -- ***************************************************************************** -- * End of fsDot11WlanBssIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11WLANEthernetIfTable Definition -- ************************************************************************* fsDot11WLANEthernetIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11WLANEthernetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN Ethernet interface." ::= { fsDot11InterfaceConfigGroup 3 } fsDot11WLANEthernetIfEntry OBJECT-TYPE SYNTAX FsDot11WLANEthernetIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN Ethernet interface configuration." INDEX { fsDot11WlanEthernetIfNumber } ::= { fsDot11WLANEthernetIfTable 1 } FsDot11WLANEthernetIfEntry ::= SEQUENCE { fsDot11WlanEthernetIfNumber Integer32, fsDot11WLANEthernetIfIndex Integer32, fsDot11WlanEthernetRowStatus RowStatus } fsDot11WlanEthernetIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN Ethernet interface number." ::= { fsDot11WLANEthernetIfEntry 1 } fsDot11WLANEthernetIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the ifIndex of WLAN-Ethernet interface." ::= { fsDot11WLANEthernetIfEntry 2 } fsDot11WlanEthernetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the Wlan Ethernet interface row status." ::= { fsDot11WLANEthernetIfEntry 3 } -- ***************************************************************************** -- * End of fsDot11DataRateConfigTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11PortSecurityTable Definition -- ***************************************************************************** fsDot11PortSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, fsPortSecurityTables should be used to configure port security." ::= { fsDot11InterfaceConfigGroup 4 } fsDot11PortSecurityEntry OBJECT-TYPE SYNTAX FsDot11PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB." INDEX { ifIndex } ::= { fsDot11PortSecurityTable 1 } FsDot11PortSecurityEntry ::= SEQUENCE { fsDot11PortSecurityMode INTEGER, fsDot11SecurityUserLoginTxKeyType INTEGER, fsDot11SecurityPskKeyMode INTEGER, fsDot11SecurityPskKeyString DisplayString } fsDot11PortSecurityMode OBJECT-TYPE SYNTAX INTEGER { noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the security modes of the WLAN port. noRestrictions - The default value,no any security mode is set. userLoginSecureExt - Access to the port is denied until the port client is authorized (by 802.1X). psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk - The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext - Access to the port is denied until the port client is authenticated (by ext). " ::= { fsDot11PortSecurityEntry 1 } fsDot11SecurityUserLoginTxKeyType OBJECT-TYPE SYNTAX INTEGER { userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption." ::= { fsDot11PortSecurityEntry 2 } fsDot11SecurityPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password input mode. When input as pskKeyModePassPhrase, fsDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, fsDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'." ::= { fsDot11PortSecurityEntry 3 } fsDot11SecurityPskKeyString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the password string used for psk authentication." ::= { fsDot11PortSecurityEntry 4 } -- ***************************************************************************** -- * End of fsDot11PortSecurityTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11WlanMeshIfTable Definition -- ************************************************************************* fsDot11WlanMeshIfTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11WlanMeshIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WLAN mesh interface." ::= { fsDot11InterfaceConfigGroup 5 } fsDot11WlanMeshIfEntry OBJECT-TYPE SYNTAX FsDot11WlanMeshIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WLAN mesh interface configuration." INDEX { fsDot11WlanMeshIfNumber } ::= { fsDot11WlanMeshIfTable 1 } FsDot11WlanMeshIfEntry ::= SEQUENCE { fsDot11WlanMeshIfNumber Integer32, fsDot11WlanMeshIfIndex Integer32, fsDot11WlanMeshRowStatus RowStatus } fsDot11WlanMeshIfNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node represents the WLAN mesh interface number." ::= { fsDot11WlanMeshIfEntry 1 } fsDot11WlanMeshIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This node represents the index of WLAN mesh interface." ::= { fsDot11WlanMeshIfEntry 2 } fsDot11WlanMeshRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This node represents the WLAN mesh interface row status." ::= { fsDot11WlanMeshIfEntry 3 } -- ***************************************************************************** -- * End of fsDot11WlanMeshIfTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11ACBackupGroup Definition -- ***************************************************************************** fsDot11BackupACAdrssIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0." ::= { fsDot11ACBackupGroup 1 } fsDot11BackupACAdrssIPv6 OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0." ::= { fsDot11ACBackupGroup 2 } -- ***************************************************************************** -- * End of fsDot11ACBackupGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioElementConfigGroup Definition -- ***************************************************************************** fsDot11nRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11nRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure dot11n on the radio." ::= { fsDot11RadioElementConfigGroup 1 } fsDot11nRadioCfgEntry OBJECT-TYPE SYNTAX FsDot11nRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the dot11n configuration on the radio." INDEX { fsDot11nRadioCfgIndex } ::= { fsDot11nRadioCfgTable 1 } FsDot11nRadioCfgEntry ::= SEQUENCE { fsDot11nRadioCfgIndex FsDot11RadioElementIndex, fsDot11nAMpduEnable TruthValue, fsDot11nAMsduEnable TruthValue, fsDot11nClientDot11nOnly TruthValue, fsDot11nChanelBand INTEGER, fsDot11nShortGiEnable TruthValue, fsDot11nClientDot11acOnly TruthValue, fsDot11nSupportMaxMcs Integer32, fsDot11nMandatoryMaxMcs Integer32 } fsDot11nRadioCfgIndex OBJECT-TYPE SYNTAX FsDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { fsDot11nRadioCfgEntry 1 } fsDot11nAMpduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { true } ::= { fsDot11nRadioCfgEntry 2 } fsDot11nAMsduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MSDU." DEFVAL { true } ::= { fsDot11nRadioCfgEntry 3 } fsDot11nClientDot11nOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode." DEFVAL { false } ::= { fsDot11nRadioCfgEntry 4 } fsDot11nChanelBand OBJECT-TYPE SYNTAX INTEGER { mode20(1), mode40(2), mode80(3), mode160(4), mode80and80(5), mode320(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." DEFVAL { mode40 } ::= { fsDot11nRadioCfgEntry 5 } fsDot11nShortGiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The function of Short GI." DEFVAL { true } ::= { fsDot11nRadioCfgEntry 6 } fsDot11nClientDot11acOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Only permit clients of 11ac mode." DEFVAL { false } ::= { fsDot11nRadioCfgEntry 7 } fsDot11nSupportMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 76 } ::= { fsDot11nRadioCfgEntry 8 } fsDot11nMandatoryMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 255 } ::= { fsDot11nRadioCfgEntry 9 } -- ***************************************************************************** -- * End of fsDot11RadioElementConfigGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RadioWDSTable Definition -- ***************************************************************************** fsDot11RadioWDSTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RadioWDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure WDS on the radio." ::= { fsDot11RadioElementConfigGroup 2 } fsDot11RadioWDSEntry OBJECT-TYPE SYNTAX FsDot11RadioWDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the WDS configuration on the radio." INDEX { fsDot11RadioWDSIndex } ::= { fsDot11RadioWDSTable 1 } FsDot11RadioWDSEntry ::= SEQUENCE { fsDot11RadioWDSIndex FsDot11RadioElementIndex, fsDot11RadioWDSMode INTEGER, fsDot11RadioWDSNetWorkID OCTET STRING, fsDot11WDSSecPskKeyMode INTEGER, fsDot11WDSSecPskKeyString DisplayString } fsDot11RadioWDSIndex OBJECT-TYPE SYNTAX FsDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the element index of radio." ::= { fsDot11RadioWDSEntry 1 } fsDot11RadioWDSMode OBJECT-TYPE SYNTAX INTEGER { nowds(1), wds(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled" DEFVAL { nowds } ::= { fsDot11RadioWDSEntry 2 } fsDot11RadioWDSNetWorkID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the mesh ID of WDS." DEFVAL { "" } ::= { fsDot11RadioWDSEntry 3 } fsDot11WDSSecPskKeyMode OBJECT-TYPE SYNTAX INTEGER { pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the PSK mode of WDS." DEFVAL { pskKeyModeNone } ::= { fsDot11RadioWDSEntry 4 } fsDot11WDSSecPskKeyString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the PSK value of WDS." DEFVAL { "" } ::= { fsDot11RadioWDSEntry 5 } -- ***************************************************************************** -- * End of fsDot11RadioWDSTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11nRadioCfg2Table Definition -- ***************************************************************************** fsDot11nRadioCfg2Table OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11nRadioCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure dot11n on the radio." ::= { fsDot11RadioElementConfigGroup 3 } fsDot11nRadioCfg2Entry OBJECT-TYPE SYNTAX FsDot11nRadioCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the dot11n configuration on the radio." INDEX { fsDot11nRadioCfg2APIDIndex, fsDot11nRadioCfg2RadioIDIndex } ::= { fsDot11nRadioCfg2Table 1 } FsDot11nRadioCfg2Entry ::= SEQUENCE { fsDot11nRadioCfg2APIDIndex FsDot11ObjectIDType, fsDot11nRadioCfg2RadioIDIndex FsDot11RadioScopeType, fsDot11nRadioCfg2AMpduEnable TruthValue, fsDot11nRadioCfg2AMsduEnable TruthValue, fsDot11nRadioCfg2ClientDot11nOnly TruthValue, fsDot11nRadioCfg2ChannelBand INTEGER, fsDot11nRadioCfg2ShortGiEnable TruthValue, fsDot11nRadioCfg2AMpduEnableCM INTEGER, fsDot11nRadioCfg2ChannelBandCM INTEGER, fsDot11nRadioCfg2ShortGiEnableCM INTEGER, fsDot11nRadioCfg2ClientDot11acOnly TruthValue, fsDot11nRadioCfg2ClientDot11nOnlyCM FsDot11TruthValueCM, fsDot11nRadioCfg2SupportMaxMcs Integer32, fsDot11nRadioCfg2MandatoryMaxMcs Integer32 } fsDot11nRadioCfg2APIDIndex OBJECT-TYPE SYNTAX FsDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the AP." ::= { fsDot11nRadioCfg2Entry 1 } fsDot11nRadioCfg2RadioIDIndex OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { fsDot11nRadioCfg2Entry 2 } fsDot11nRadioCfg2AMpduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { true } ::= { fsDot11nRadioCfg2Entry 3 } fsDot11nRadioCfg2AMsduEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MSDU." DEFVAL { true } ::= { fsDot11nRadioCfg2Entry 4 } fsDot11nRadioCfg2ClientDot11nOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode." DEFVAL { false } ::= { fsDot11nRadioCfg2Entry 5 } fsDot11nRadioCfg2ChannelBand OBJECT-TYPE SYNTAX INTEGER { mode20(1), mode40(2), mode80(3), mode160(4), mode80and80(5), mode320(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." ::= { fsDot11nRadioCfg2Entry 6 } fsDot11nRadioCfg2ShortGiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of Short GI." DEFVAL { true } ::= { fsDot11nRadioCfg2Entry 7 } fsDot11nRadioCfg2AMpduEnableCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of A-MPDU." DEFVAL { on } ::= { fsDot11nRadioCfg2Entry 8 } fsDot11nRadioCfg2ChannelBandCM OBJECT-TYPE SYNTAX INTEGER { mode40(1), mode20(2), mode80(3), mode160(4), mode80and80(5), mode320(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the bandwidth mode." ::= { fsDot11nRadioCfg2Entry 9 } fsDot11nRadioCfg2ShortGiEnableCM OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of Short GI." DEFVAL { on } ::= { fsDot11nRadioCfg2Entry 10 } fsDot11nRadioCfg2ClientDot11acOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Only permit clients of 11ac mode." DEFVAL { false } ::= { fsDot11nRadioCfg2Entry 11 } fsDot11nRadioCfg2ClientDot11nOnlyCM OBJECT-TYPE SYNTAX FsDot11TruthValueCM MAX-ACCESS read-write STATUS current DESCRIPTION "If radio type is 802.11an or 802.11gn, permit only clients of 11n mode. If radio type is 802.11ac, permit clients of both 11n and 11ac mode." DEFVAL { dot11false } ::= { fsDot11nRadioCfg2Entry 12 } fsDot11nRadioCfg2SupportMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 76 } ::= { fsDot11nRadioCfg2Entry 13 } fsDot11nRadioCfg2MandatoryMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 255 } ::= { fsDot11nRadioCfg2Entry 14 } -- ***************************************************************************** -- * End of fsDot11nRadioCfg2Table Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11CfgNotifyGroup Definition -- ***************************************************************************** fsDot11CfgNotifications OBJECT IDENTIFIER ::= { fsDot11CfgNotifyGroup 0 } fsDot11CfgCipherChange NOTIFICATION-TYPE OBJECTS { fsDot11SSIDName, fsDot11SecurityCiphers } STATUS current DESCRIPTION "This notification is sent when cipher type of corresponding service template is changed." ::= { fsDot11CfgNotifications 1 } fsDot11CfgPSKChange NOTIFICATION-TYPE OBJECTS { fsDot11SSIDName } STATUS current DESCRIPTION "This notification is sent when pre-shared key of corresponding service template is changed." ::= { fsDot11CfgNotifications 2 } fsDot11SSIDWepIDConflictTrap NOTIFICATION-TYPE OBJECTS { fsDot11PreConflictTemplateNum, fsDot11CurrConflictTemplateNum, fsDot11ConflictCipherIdx, fsDot11ConfigureAPID, fsDot11ConfigureRadioID, fsDot11ConfigureAPMacAddress, fsDot11PreConflictTemplateSSID, fsDot11CurrConflictTemplateSSID } STATUS current DESCRIPTION "This notification will be sent when the same wep ID is configured on two service policies." ::= { fsDot11CfgNotifications 3 } -- CFG Notification variable object fsDot11CfgTrapVarObjects OBJECT IDENTIFIER ::= { fsDot11CfgNotifyGroup 1 } fsDot11PreConflictTemplateNum OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration." ::= { fsDot11CfgTrapVarObjects 1 } fsDot11CurrConflictTemplateNum OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration." ::= { fsDot11CfgTrapVarObjects 2 } fsDot11ConflictCipherIdx OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents wep ID that conflicted with." ::= { fsDot11CfgTrapVarObjects 3 } fsDot11ConfigureAPID OBJECT-TYPE SYNTAX FsDot11ObjectIDType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents which AP is configured." ::= { fsDot11CfgTrapVarObjects 4 } fsDot11ConfigureRadioID OBJECT-TYPE SYNTAX FsDot11RadioScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents which radio in AP is configured." ::= { fsDot11CfgTrapVarObjects 5 } fsDot11ConfigureAPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents MAC Address of AP." ::= { fsDot11CfgTrapVarObjects 6 } fsDot11PreConflictTemplateSSID OBJECT-TYPE SYNTAX FsDot11SSIDStringType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the previous SSID of the AP." ::= { fsDot11CfgTrapVarObjects 7 } fsDot11CurrConflictTemplateSSID OBJECT-TYPE SYNTAX FsDot11SSIDStringType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the current SSID of the AP." ::= { fsDot11CfgTrapVarObjects 8 } -- ***************************************************************************** -- * End of fsDot11CfgNotifyGroup Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11LocalACTemplateTable Definition -- ***************************************************************************** fsDot11LocalACTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11LocalACTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By local AC template CLI, administrator will configure the parameters of LocalAC by convenience. Before local AC boot up and connect to AC by CAPWAP tunnel, administrator will create local AC template for each local AC. When local AC connect to AC, AC will assign configuration to local AC by fsDot11LocalACSerialID information in local AC template." ::= { fsDot11LocalACConfigGroup 1 } fsDot11LocalACTemplateEntry OBJECT-TYPE SYNTAX FsDot11LocalACTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each LocalAC." INDEX { fsDot11LocalACTemplateName } ::= { fsDot11LocalACTemplateTable 1 } FsDot11LocalACTemplateEntry ::= SEQUENCE { fsDot11LocalACTemplateName OCTET STRING, fsDot11LocalACName OCTET STRING, fsDot11LocalACSerialID OCTET STRING, fsDot11TemLocalACModelAlias OCTET STRING, fsDot11LocalACTempRowStatus RowStatus, fsDot11LocalACStatus INTEGER, fsDot11LocalACIPAddress IpAddress, fsDot11LocalACIPv6Address OCTET STRING, fsDot11EchoInterval Integer32, fsDot11RetransInterval Integer32, fsDot11RetransCount Integer32, fsDot11FirmwareUpgrade INTEGER } fsDot11LocalACTemplateName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of LocalAC template." ::= { fsDot11LocalACTemplateEntry 1 } fsDot11LocalACName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the LocalAC name." ::= { fsDot11LocalACTemplateEntry 2 } fsDot11LocalACSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents LocalAC serial id." ::= { fsDot11LocalACTemplateEntry 3 } fsDot11TemLocalACModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the alias of LocalAC model name." ::= { fsDot11LocalACTemplateEntry 4 } fsDot11LocalACTempRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { fsDot11LocalACTemplateEntry 5 } fsDot11LocalACStatus OBJECT-TYPE SYNTAX INTEGER { join(1), joinConfirm(2), download(3), config(4), run(5), idle(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the capwap status of local AC. The following values are supported: join - local AC is joining to cnetral AC. joinConfirm - cnetral AC confirm whether permit local AC to - join. download - local AC is downloading software from cnetral - AC. config - local AC and cnetral AC exchange configuration - before local AC provide WLAN service. run - The local AC is run. idle - The local AC is idle." ::= { fsDot11LocalACTemplateEntry 6 } fsDot11LocalACIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the IP address of an LocalAC." ::= { fsDot11LocalACTemplateEntry 7 } fsDot11LocalACIPv6Address OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the IPv6 address of LocalAC." ::= { fsDot11LocalACTemplateEntry 8 } fsDot11EchoInterval OBJECT-TYPE SYNTAX Integer32(0 | 5..255) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of echo." DEFVAL { 10 } ::= { fsDot11LocalACTemplateEntry 9 } fsDot11RetransInterval OBJECT-TYPE SYNTAX Integer32(3..8) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the interval of retransmit." DEFVAL { 5 } ::= { fsDot11LocalACTemplateEntry 10 } fsDot11RetransCount OBJECT-TYPE SYNTAX Integer32(2..5) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the maximum of retransmit." DEFVAL { 3 } ::= { fsDot11LocalACTemplateEntry 11 } fsDot11FirmwareUpgrade OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the status of firmware upgrade for an local AC. The following values are supported: enable - local AC firmware upgrade will be enabled. disable - local AC firmware upgrade will be disabled." DEFVAL { enable } ::= { fsDot11LocalACTemplateEntry 12 } -- ***************************************************************************** -- * End of fsDot11LocalACTemplateTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RemoteCfgApTable Definition -- ***************************************************************************** fsDot11RemoteCfgApTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RemoteCfgApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote configuration for an AP." ::= { fsDot11RemoteConfigGroup 1 } fsDot11RemoteCfgApEntry OBJECT-TYPE SYNTAX FsDot11RemoteCfgApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each AP." INDEX { fsDot11RmtApName } ::= { fsDot11RemoteCfgApTable 1 } FsDot11RemoteCfgApEntry ::= SEQUENCE { fsDot11RmtApName OCTET STRING, fsDot11RmtVlanList OCTET STRING, fsDot11RmtCfgEnable TruthValue } fsDot11RmtApName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of an AP." ::= { fsDot11RemoteCfgApEntry 1 } fsDot11RmtVlanList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the VLAN list on an AP." ::= { fsDot11RemoteCfgApEntry 2 } fsDot11RmtCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables remote configuration synchronization." DEFVAL { false } ::= { fsDot11RemoteCfgApEntry 3 } -- ***************************************************************************** -- * End of fsDot11RemoteCfgApTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * fsDot11RemoteCfgIFTable Definition -- ***************************************************************************** fsDot11RemoteCfgIFTable OBJECT-TYPE SYNTAX SEQUENCE OF FsDot11RemoteCfgIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remote configuration for interface on an AP." ::= { fsDot11RemoteConfigGroup 2 } fsDot11RemoteCfgIFEntry OBJECT-TYPE SYNTAX FsDot11RemoteCfgIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains configuration information for each interface on an AP." INDEX { fsDot11RmtIfApName, fsDot11RmtIfType, fsDot11RmtIfNum } ::= { fsDot11RemoteCfgIFTable 1 } FsDot11RemoteCfgIFEntry ::= SEQUENCE { fsDot11RmtIfApName OCTET STRING, fsDot11RmtIfType Integer32, fsDot11RmtIfNum Integer32, fsDot11RmtIfName OCTET STRING, fsDot11RmtIfLinkType INTEGER, fsDot11RmtIfAccessVlan Integer32, fsDot11RmtIfTrunkPvidVlan Integer32, fsDot11RmtIfTrunkVlanlist OCTET STRING, fsDot11RmtIfHybridPvidVlan Integer32, fsDot11RmtIfHybVlanListTag OCTET STRING, fsDot11RmtIfHybVlanListUnTag OCTET STRING, fsDot11RmtIfIsolate TruthValue, fsDot11RmtIfLinkAggGroupId Integer32, fsDot11RmtIfManagement TruthValue } fsDot11RmtIfApName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of an AP." ::= { fsDot11RemoteCfgIFEntry 1 } fsDot11RmtIfType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the type of the interface. ethernet (1), gigabitethernet (2), ten-gigabitethernet (3), smartrate-ethernet(4)." ::= { fsDot11RemoteCfgIFEntry 2 } fsDot11RmtIfNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of the interface." ::= { fsDot11RemoteCfgIFEntry 3 } fsDot11RmtIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the name of the interface." ::= { fsDot11RemoteCfgIFEntry 4 } fsDot11RmtIfLinkType OBJECT-TYPE SYNTAX INTEGER { access (1), trunk (2), hybrid (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the link type to access, hybrid or trunk. Setting recommend one and setup more related nodes." ::= { fsDot11RemoteCfgIFEntry 5 } fsDot11RmtIfAccessVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the access VLAN for a port." ::= { fsDot11RemoteCfgIFEntry 6 } fsDot11RmtIfTrunkPvidVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the default VLAN for a port." ::= { fsDot11RemoteCfgIFEntry 7 } fsDot11RmtIfTrunkVlanlist OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the permitted VLAN list for a port." ::= { fsDot11RemoteCfgIFEntry 8 } fsDot11RmtIfHybridPvidVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the default VLAN for the hybrid port." ::= { fsDot11RemoteCfgIFEntry 9 } fsDot11RmtIfHybVlanListTag OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Assign the hybrid port to tagged VLANs." ::= { fsDot11RemoteCfgIFEntry 10 } fsDot11RmtIfHybVlanListUnTag OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Assign the hybrid port to untagged VLANs." ::= { fsDot11RemoteCfgIFEntry 11 } fsDot11RmtIfIsolate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable port isolation." DEFVAL { true } ::= { fsDot11RemoteCfgIFEntry 12 } fsDot11RmtIfLinkAggGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify link aggregation group number for the port." ::= { fsDot11RemoteCfgIFEntry 13 } fsDot11RmtIfManagement OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Interface management of the port." DEFVAL { true } ::= { fsDot11RemoteCfgIFEntry 14 } -- ***************************************************************************** -- * End of fsDot11RemoteCfgIFTable Definition -- ***************************************************************************** END