-- ==================================================================
-- Copyright (c) 2009-2023 FS.COM Inc. All Rights Reserved.
--
-- Description: MPLSOAM MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2007-03-31 Created by Lixufu ID: 05023
-- ==================================================================
FS-MPLSOAM-MIB DEFINITIONS ::= BEGIN

IMPORTS
        fsCommon
    FROM FS-OID-MIB
        IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, 
        NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        TruthValue, RowStatus, TEXTUAL-CONVENTION
    FROM SNMPv2-TC;

fsMplsOam MODULE-IDENTITY
    LAST-UPDATED "200703310000Z"                -- March 31, 2007 at 00:00 GMT
    ORGANIZATION
        "Fiberstore Co.,Limited"
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB contains objects to configure OAM module.
        The Operation, Administration and Maintenance (OAM)
        is an effective means for decreasing the cost of network maintenance.
        The MPLS OAM is used to administrate and maintain MPLS."
    ::= { fsCommon 79 }

FsMplsOAMDefectType ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An indication of the OAM's defect type:
        1: dServer, server layer defect;
        2: dPeerMe, peer network maintenance entity defect;
        3: dLOCV, Loss of Connectivity Verification defect;
        4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
        5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
        6: dExcess, receiving excess rate of CV/FFD;
        7: dUnknown, unknown defect in the MPLS network..
        8: rlsn down;
        9: dLspDown;
        10: MPLS OAM ME;
        11: no defect."
    SYNTAX      INTEGER
        {
            dServer(1),
            dPeerMe(2),
            dLOCV(3),
            dTTSIMismatch(4),
            dTTSIMismerge(5),
            dExcess(6),
            dUnknown(7),
            dRlsnDown(8),
            dLspDown(9),
            dME(10),
            noDefect(11)
        }

FsMplsOAMDetectFreq ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ):
        For CV: the frequency is static. The value is 1/s.
        For FFD: the frequency is set by user. The value
        can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms.
        Any other frequency is wrong.
        1: 10ms;
        2: 20ms;
        3: 50ms;
        4: 100ms;
        5: 200ms;
        6: 500ms;
        7: 1000ms(only for cv)."
    SYNTAX      INTEGER
        {
            ffd10ms(1),
            ffd20ms(2),
            ffd50ms(3),
            ffd100ms(4),
            ffd200ms(5),
            ffd500ms(6),
            cv1000ms(7)
        }

-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
fsMplsOamScalarGroup OBJECT IDENTIFIER ::= { fsMplsOam 1 }

fsMplsOamCapability OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Whether OAM is globally capable.
        false: incapable;
        true: capable;
        The default value is incapable."
    DEFVAL  { false }
    ::= { fsMplsOamScalarGroup 1 }

fsMplsOamTrapOpen OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Whether OAM trap is globally enabled.
        false: disable;
        true: enable;
        The default value is disable."
    DEFVAL  { false }
    ::= { fsMplsOamScalarGroup 2 }

fsMplsOamTable OBJECT IDENTIFIER ::= { fsMplsOam 2 }

fsMplsOamIgrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsMplsOamIgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies per-LSP MPLS OAM ingress capability and
        associated information, such as IgrLspName and IgrDetType."
    ::= { fsMplsOamTable 1 }

fsMplsOamIgrEntry OBJECT-TYPE
    SYNTAX      FsMplsOamIgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created by an LSR for every LSP
        capable of supporting MPLS OAM at ingress."
    INDEX
        {
            fsMplsOamIgrIndex
        }
    ::= { fsMplsOamIgrTable 1 }

FsMplsOamIgrEntry ::= SEQUENCE
    {
        fsMplsOamIgrIndex         Unsigned32,
        fsMplsOamIgrLspName       OCTET STRING,
        fsMplsOamIgrDetectType    INTEGER,
        fsMplsOamIgrDetectFreq    FsMplsOAMDetectFreq,
        fsMplsOamIgrRevType       INTEGER,
        fsMplsOamIgrRevLspName    OCTET STRING,
        fsMplsOamIgrLspId         Integer32,
        fsMplsOamIgrEnable        TruthValue,
        fsMplsOamIgrDefectType    FsMplsOAMDefectType,
        fsMplsOamIgrRowStatus     RowStatus
    }

fsMplsOamIgrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is an unique index for an OAM ingress entry in the OAM table."
    ::= { fsMplsOamIgrEntry 1 }

fsMplsOamIgrLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The name of an LSP.
        It means the LSP name of the detected LSP."
    ::= { fsMplsOamIgrEntry 2 }

fsMplsOamIgrDetectType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            cv(1),
            ffd(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "There are two types of OAM packets, CV and FFD.
        The CV flow is generated at the source LSR of the LSP with
        a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
        FFD provides failure detection option for an LSP independent
        of the CV based availability model and is not tied to the
        CV insertion rate. Insertion rates at 1/s or faster may
        also be used.
        The CV/FFD packet contains a network-unique identifier (TTSI)
        so that all types of defects can be detected.
        1: CV;
        2: FFD."
    ::= { fsMplsOamIgrEntry 3 }

fsMplsOamIgrDetectFreq OBJECT-TYPE
    SYNTAX      FsMplsOAMDetectFreq
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's frequent type."
    ::= { fsMplsOamIgrEntry 4 }

fsMplsOamIgrRevType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            private(1),
            share(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When an LSP is found to be in defect, the sink LSR of the LSP
        should send BDI to inform the source LSR of the LSP, the BDI is
        transferred through the reverse LSP.
        The type of reverse LSP can be private or shared.
        If private, then the reverse LSP can be used only by the oam ingress;
        If shared, the reverse LSP which is shared between many forward
        LSPs, whose source LSRs are the same and sink LSRs are the same.
        1: private;
        2: share."
    ::= { fsMplsOamIgrEntry 5 }

fsMplsOamIgrRevLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of the reverse LSP."
    ::= { fsMplsOamIgrEntry 6 }

fsMplsOamIgrLspId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "For ingress, the object indicates the lsp ID of
        the detected LSP."
    ::= { fsMplsOamIgrEntry 7 }

fsMplsOamIgrEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Whether one LSP is OAM enable.
        If disable, LSP is not monitored;
        If enable, CV/FFD is generated at the source LSR of the LSP and
        checked at the sink LSR of the LSP, and user can set
        other configuration.
        false: The OAM function is disabled on the ingress;
        true: The OAM function is enabled on the ingress."
    DEFVAL  { false }
    ::= { fsMplsOamIgrEntry 8 }

fsMplsOamIgrDefectType OBJECT-TYPE
    SYNTAX      FsMplsOAMDefectType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's defect type."
    ::= { fsMplsOamIgrEntry 9 }

fsMplsOamIgrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object is responsible for managing the creation,
        deletion and modification of rows, which support active
        status and CreatAndGo, destroy operation.
        To create a new row, fsMplsOamIgrLspName, fsMplsOamIgrDetectType,
        fsMplsOamIgrDetectFreq, fsMplsOamIgrRevType, fsMplsOamIgrRevLspName,
        and fsMplsOamIgrLspId must be specified."
    ::= { fsMplsOamIgrEntry 10 }

fsMplsOamEgrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF FsMplsOamEgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies per-LSP MPLS OAM capability and
        associated information, such as DetectType, DetectFrequency."
    ::= { fsMplsOamTable 2 }

fsMplsOamEgrEntry OBJECT-TYPE
    SYNTAX      FsMplsOamEgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created by an LSR for every LSP
        capable of supporting MPLS OAM at egress."
    INDEX
        {
            fsMplsOamEgrIndex
        }
    ::= { fsMplsOamEgrTable 1 }

FsMplsOamEgrEntry ::= SEQUENCE
    {
        fsMplsOamEgrIndex         Unsigned32,
        fsMplsOamEgrLspName       OCTET STRING,
        fsMplsOamEgrDetectType    INTEGER,
        fsMplsOamEgrDetectFreq    FsMplsOAMDetectFreq,
        fsMplsOamEgrRevType       INTEGER,
        fsMplsOamEgrRevLspName    OCTET STRING,
        fsMplsOamEgrLsrId         IpAddress,
        fsMplsOamEgrLspId         Integer32,
        fsMplsOamEgrEnable        TruthValue,
        fsMplsOamEgrDefectType    FsMplsOAMDefectType,
        fsMplsOamEgrRowStatus     RowStatus
    }

fsMplsOamEgrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is a unique index for an OAM egress entry in the OAM table."
    ::= { fsMplsOamEgrEntry 1 }

fsMplsOamEgrLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of static LSP at egress."
    ::= { fsMplsOamEgrEntry 2 }

fsMplsOamEgrDetectType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            cv(1),
            ffd(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "There are two types of OAM packets, CV and FFD.
        The CV flow is generated at the source LSR of the LSP with
        a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
        FFD provides failure detection option for an LSP independent
        of the CV based availability model and is not tied to the
        CV insertion rate. Insertion rates at 1/s or faster may
        also be used.
        The CV/FFD packet contains a network-unique identifier (TTSI)
        so that all types of defects can be detected.
        1: CV;
        2: FFD."
    ::= { fsMplsOamEgrEntry 3 }

fsMplsOamEgrDetectFreq OBJECT-TYPE
    SYNTAX      FsMplsOAMDetectFreq
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's frequent type."
    ::= { fsMplsOamEgrEntry 4 }

fsMplsOamEgrRevType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            private(1),
            share(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When an LSP is found to be in defect, the sink LSR of the LSP
        should send BDI to inform the source LSR of the LSP, the BDI is
        transferred through the reverse LSP.
        The type of reverse LSP can be private or shared.
        If private, then the reverse LSP can be used only when the only
        LSP in defect;
        If shared, the reverse LSP, which is shared between many forward
        LSPs that have the same source LSRs and sink LSRs.
        1: private;
        2: share."
    ::= { fsMplsOamEgrEntry 5 }

fsMplsOamEgrRevLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of a reverse static-lsp."
    ::= { fsMplsOamEgrEntry 6 }

fsMplsOamEgrLsrId OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the Ingress LSR ID of the LSP."
    ::= { fsMplsOamEgrEntry 7 }

fsMplsOamEgrLspId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the the Ingress session lsp ID of the
        detected static-LSP."
    ::= { fsMplsOamEgrEntry 8 }

fsMplsOamEgrEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Whether one LSP is enabled with OAM.
        If disable, LSP is not monitored;
        If enable, CV/FFD is generated at the source LSR of the LSP and
        checked at the sink LSR of the LSP, and user can set
        other configuration.
        false: The OAM function is disabled on the egress;
        true: The OAM function is enabled on the egress."
    DEFVAL  { false }
    ::= { fsMplsOamEgrEntry 9 }

fsMplsOamEgrDefectType OBJECT-TYPE
    SYNTAX      FsMplsOAMDefectType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's defect type."
    ::= { fsMplsOamEgrEntry 10 }

fsMplsOamEgrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object is responsible for managing the creation,
        deletion and modification of rows, which support active
        status and CreatAndGo, destroy operation.
        To create a new row, fsMplsOamEgrLspName, fsMplsOamEgrDetectType,
        fsMplsOamEgrDetectFreq, fsMplsOamEgrRevType, fsMplsOamEgrRevLspName,
        fsMplsOamEgrLsrId and fsMplsOamEgrLspId must be specified."
    ::= { fsMplsOamEgrEntry 11 }

fsMplsOamNotifications OBJECT IDENTIFIER ::= { fsMplsOam 3 }

fsMplsOamIgrLSPOutDefect NOTIFICATION-TYPE
    OBJECTS
        {
            fsMplsOamIgrLspName,
            fsMplsOamIgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        out of the defect state at the LSP ingress."
    ::= { fsMplsOamNotifications 1 }

fsMplsOamIgrLSPInDefect NOTIFICATION-TYPE
    OBJECTS
        {
            fsMplsOamIgrLspName,
            fsMplsOamIgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        in the defect state at the LSP ingress."
    ::= { fsMplsOamNotifications 2 }

fsMplsOamEgrLSPOutDefect NOTIFICATION-TYPE
    OBJECTS
        {
            fsMplsOamEgrLspName,
            fsMplsOamEgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        out of the defect state at the LSP egress."
    ::= { fsMplsOamNotifications 3 }

fsMplsOamEgrLSPInDefect NOTIFICATION-TYPE
    OBJECTS
        {
            fsMplsOamEgrLspName,
            fsMplsOamEgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        in the defect state at the LSP egress."
    ::= { fsMplsOamNotifications 4 }

END