Nortel-MsCarrier-MscPassport-LanDriversMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs, mscComponents FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB FddiMACLongAddressType, Counter32, DisplayString, FddiTimeNano, StorageType, RowStatus, InterfaceIndex, Gauge32, Integer32, MacAddress, FddiTimeMilli, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, NonReplicated, EnterpriseDateAndTime, PassportCounter64, Link FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB mscLpIndex, mscLp FROM Nortel-MsCarrier-MscPassport-LogicalProcessorMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- LanDrivers Enterprise MIB." lanDriversMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 30 } -- Lp/n Ethernet/n -- This component defines an instance of an Ethernet station attached to a -- bus. One instance of this component will be created for each hardware -- port. Each station will be provisioned prior to operating on the bus. mscLpEnet OBJECT IDENTIFIER ::= { mscLp 3 } mscLpEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnet components." ::= { mscLpEnet 1 } mscLpEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnet component." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetRowStatusTable 1 } MscLpEnetRowStatusEntry ::= SEQUENCE { mscLpEnetRowStatus RowStatus, mscLpEnetComponentName DisplayString, mscLpEnetStorageType StorageType, mscLpEnetIndex Integer32 } mscLpEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnet components. These components can be added and deleted." ::= { mscLpEnetRowStatusEntry 1 } mscLpEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetRowStatusEntry 2 } mscLpEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnet tables." ::= { mscLpEnetRowStatusEntry 4 } mscLpEnetIndex OBJECT-TYPE SYNTAX Integer32 (0..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnet tables." ::= { mscLpEnetRowStatusEntry 10 } mscLpEnetCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscLpEnet 10 } mscLpEnetCidDataEntry OBJECT-TYPE SYNTAX MscLpEnetCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetCidDataTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetCidDataTable 1 } MscLpEnetCidDataEntry ::= SEQUENCE { mscLpEnetCustomerIdentifier Unsigned32 } mscLpEnetCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscLpEnetCidDataEntry 1 } mscLpEnetIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLpEnet 11 } mscLpEnetIfEntryEntry OBJECT-TYPE SYNTAX MscLpEnetIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetIfEntryTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetIfEntryTable 1 } MscLpEnetIfEntryEntry ::= SEQUENCE { mscLpEnetIfAdminStatus INTEGER, mscLpEnetIfIndex InterfaceIndex } mscLpEnetIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpEnetIfEntryEntry 1 } mscLpEnetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLpEnetIfEntryEntry 2 } mscLpEnetProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisioned attributes for the Ethernet component." ::= { mscLpEnet 12 } mscLpEnetProvEntry OBJECT-TYPE SYNTAX MscLpEnetProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetProvTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetProvTable 1 } MscLpEnetProvEntry ::= SEQUENCE { mscLpEnetHeartbeatPacket INTEGER, mscLpEnetApplicationFramerName Link } mscLpEnetHeartbeatPacket OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The heartbeat packet feature is used to select whether or not the station will generate a heartbeat packet. If enabled, the station will generate one heartbeat packet every second. If disabled, the station will not generate any heartbeat packets." DEFVAL { enabled } ::= { mscLpEnetProvEntry 1 } mscLpEnetApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Ethernet component. This link is used by the component administration system (CAS) to identify which card the application component (associated with the Framer component) is to be created." ::= { mscLpEnetProvEntry 2 } mscLpEnetAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { mscLpEnet 13 } mscLpEnetAdminInfoEntry OBJECT-TYPE SYNTAX MscLpEnetAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetAdminInfoTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetAdminInfoTable 1 } MscLpEnetAdminInfoEntry ::= SEQUENCE { mscLpEnetVendor AsciiString, mscLpEnetCommentText AsciiString } mscLpEnetVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { mscLpEnetAdminInfoEntry 1 } mscLpEnetCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { mscLpEnetAdminInfoEntry 2 } mscLpEnetStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLpEnet 15 } mscLpEnetStateEntry OBJECT-TYPE SYNTAX MscLpEnetStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetStateTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetStateTable 1 } MscLpEnetStateEntry ::= SEQUENCE { mscLpEnetAdminState INTEGER, mscLpEnetOperationalState INTEGER, mscLpEnetUsageState INTEGER } mscLpEnetAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLpEnetStateEntry 1 } mscLpEnetOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLpEnetStateEntry 2 } mscLpEnetUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLpEnetStateEntry 3 } mscLpEnetOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLpEnet 16 } mscLpEnetOperStatusEntry OBJECT-TYPE SYNTAX MscLpEnetOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetOperStatusTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetOperStatusTable 1 } MscLpEnetOperStatusEntry ::= SEQUENCE { mscLpEnetSnmpOperStatus INTEGER } mscLpEnetSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpEnetOperStatusEntry 1 } mscLpEnetOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Ethernet component." ::= { mscLpEnet 17 } mscLpEnetOperEntry OBJECT-TYPE SYNTAX MscLpEnetOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetOperTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetOperTable 1 } MscLpEnetOperEntry ::= SEQUENCE { mscLpEnetMacAddress MacAddress } mscLpEnetMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is only recognized by one station on the network The value of this attribute will be assigned by the system. MAC address is displayed in canonical format." ::= { mscLpEnetOperEntry 1 } mscLpEnetStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical attributes for the Ethernet component." ::= { mscLpEnet 18 } mscLpEnetStatsEntry OBJECT-TYPE SYNTAX MscLpEnetStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetStatsTable." INDEX { mscLpIndex, mscLpEnetIndex } ::= { mscLpEnetStatsTable 1 } MscLpEnetStatsEntry ::= SEQUENCE { mscLpEnetAlignmentErrors Counter32, mscLpEnetFcsErrors Counter32, mscLpEnetSingleCollisionFrames Counter32, mscLpEnetMultipleCollisionFrames Counter32, mscLpEnetSqeTestErrors Counter32, mscLpEnetDeferredTransmissions Counter32, mscLpEnetLateCollisions Counter32, mscLpEnetExcessiveCollisions Counter32, mscLpEnetMacTransmitErrors Counter32, mscLpEnetCarrierSenseErrors Counter32, mscLpEnetFrameTooLongs Counter32, mscLpEnetMacReceiveErrors Counter32 } mscLpEnetAlignmentErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 2 } mscLpEnetFcsErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 3 } mscLpEnetSingleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 4 } mscLpEnetMultipleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 5 } mscLpEnetSqeTestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 6 } mscLpEnetDeferredTransmissions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 7 } mscLpEnetLateCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 8 } mscLpEnetExcessiveCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 9 } mscLpEnetMacTransmitErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 10 } mscLpEnetCarrierSenseErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 11 } mscLpEnetFrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 12 } mscLpEnetMacReceiveErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEnetStatsEntry 13 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. mscLpEnetLt OBJECT IDENTIFIER ::= { mscLpEnet 2 } mscLpEnetLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLt components." ::= { mscLpEnetLt 1 } mscLpEnetLtRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLt component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex } ::= { mscLpEnetLtRowStatusTable 1 } MscLpEnetLtRowStatusEntry ::= SEQUENCE { mscLpEnetLtRowStatus RowStatus, mscLpEnetLtComponentName DisplayString, mscLpEnetLtStorageType StorageType, mscLpEnetLtIndex NonReplicated } mscLpEnetLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLt components. These components cannot be added nor deleted." ::= { mscLpEnetLtRowStatusEntry 1 } mscLpEnetLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtRowStatusEntry 2 } mscLpEnetLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLt tables." ::= { mscLpEnetLtRowStatusEntry 4 } mscLpEnetLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLt tables." ::= { mscLpEnetLtRowStatusEntry 10 } mscLpEnetLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLt 20 } mscLpEnetLtTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex } ::= { mscLpEnetLtTopTable 1 } MscLpEnetLtTopEntry ::= SEQUENCE { mscLpEnetLtTData AsciiString } mscLpEnetLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. mscLpEnetLtFrmCmp OBJECT IDENTIFIER ::= { mscLpEnetLt 2 } mscLpEnetLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFrmCmp components." ::= { mscLpEnetLtFrmCmp 1 } mscLpEnetLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFrmCmp component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFrmCmpIndex } ::= { mscLpEnetLtFrmCmpRowStatusTable 1 } MscLpEnetLtFrmCmpRowStatusEntry ::= SEQUENCE { mscLpEnetLtFrmCmpRowStatus RowStatus, mscLpEnetLtFrmCmpComponentName DisplayString, mscLpEnetLtFrmCmpStorageType StorageType, mscLpEnetLtFrmCmpIndex NonReplicated } mscLpEnetLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFrmCmp components. These components cannot be added nor deleted." ::= { mscLpEnetLtFrmCmpRowStatusEntry 1 } mscLpEnetLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFrmCmpRowStatusEntry 2 } mscLpEnetLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFrmCmp tables." ::= { mscLpEnetLtFrmCmpRowStatusEntry 4 } mscLpEnetLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFrmCmp tables." ::= { mscLpEnetLtFrmCmpRowStatusEntry 10 } mscLpEnetLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFrmCmp 10 } mscLpEnetLtFrmCmpTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFrmCmpTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFrmCmpIndex } ::= { mscLpEnetLtFrmCmpTopTable 1 } MscLpEnetLtFrmCmpTopEntry ::= SEQUENCE { mscLpEnetLtFrmCmpTData AsciiString } mscLpEnetLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. mscLpEnetLtFrmCpy OBJECT IDENTIFIER ::= { mscLpEnetLt 3 } mscLpEnetLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFrmCpy components." ::= { mscLpEnetLtFrmCpy 1 } mscLpEnetLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFrmCpy component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFrmCpyIndex } ::= { mscLpEnetLtFrmCpyRowStatusTable 1 } MscLpEnetLtFrmCpyRowStatusEntry ::= SEQUENCE { mscLpEnetLtFrmCpyRowStatus RowStatus, mscLpEnetLtFrmCpyComponentName DisplayString, mscLpEnetLtFrmCpyStorageType StorageType, mscLpEnetLtFrmCpyIndex NonReplicated } mscLpEnetLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFrmCpy components. These components cannot be added nor deleted." ::= { mscLpEnetLtFrmCpyRowStatusEntry 1 } mscLpEnetLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFrmCpyRowStatusEntry 2 } mscLpEnetLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFrmCpy tables." ::= { mscLpEnetLtFrmCpyRowStatusEntry 4 } mscLpEnetLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFrmCpy tables." ::= { mscLpEnetLtFrmCpyRowStatusEntry 10 } mscLpEnetLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFrmCpy 10 } mscLpEnetLtFrmCpyTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFrmCpyTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFrmCpyIndex } ::= { mscLpEnetLtFrmCpyTopTable 1 } MscLpEnetLtFrmCpyTopEntry ::= SEQUENCE { mscLpEnetLtFrmCpyTData AsciiString } mscLpEnetLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. mscLpEnetLtPrtCfg OBJECT IDENTIFIER ::= { mscLpEnetLt 4 } mscLpEnetLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtPrtCfg components." ::= { mscLpEnetLtPrtCfg 1 } mscLpEnetLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtPrtCfg component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtPrtCfgIndex } ::= { mscLpEnetLtPrtCfgRowStatusTable 1 } MscLpEnetLtPrtCfgRowStatusEntry ::= SEQUENCE { mscLpEnetLtPrtCfgRowStatus RowStatus, mscLpEnetLtPrtCfgComponentName DisplayString, mscLpEnetLtPrtCfgStorageType StorageType, mscLpEnetLtPrtCfgIndex NonReplicated } mscLpEnetLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtPrtCfg components. These components cannot be added nor deleted." ::= { mscLpEnetLtPrtCfgRowStatusEntry 1 } mscLpEnetLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtPrtCfgRowStatusEntry 2 } mscLpEnetLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtPrtCfg tables." ::= { mscLpEnetLtPrtCfgRowStatusEntry 4 } mscLpEnetLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtPrtCfg tables." ::= { mscLpEnetLtPrtCfgRowStatusEntry 10 } mscLpEnetLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtPrtCfg 10 } mscLpEnetLtPrtCfgTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtPrtCfgTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtPrtCfgIndex } ::= { mscLpEnetLtPrtCfgTopTable 1 } MscLpEnetLtPrtCfgTopEntry ::= SEQUENCE { mscLpEnetLtPrtCfgTData AsciiString } mscLpEnetLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. mscLpEnetLtFb OBJECT IDENTIFIER ::= { mscLpEnetLt 5 } mscLpEnetLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFb components." ::= { mscLpEnetLtFb 1 } mscLpEnetLtFbRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFb component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex } ::= { mscLpEnetLtFbRowStatusTable 1 } MscLpEnetLtFbRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbRowStatus RowStatus, mscLpEnetLtFbComponentName DisplayString, mscLpEnetLtFbStorageType StorageType, mscLpEnetLtFbIndex NonReplicated } mscLpEnetLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFb components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbRowStatusEntry 1 } mscLpEnetLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbRowStatusEntry 2 } mscLpEnetLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFb tables." ::= { mscLpEnetLtFbRowStatusEntry 4 } mscLpEnetLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFb tables." ::= { mscLpEnetLtFbRowStatusEntry 10 } mscLpEnetLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFb 20 } mscLpEnetLtFbTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex } ::= { mscLpEnetLtFbTopTable 1 } MscLpEnetLtFbTopEntry ::= SEQUENCE { mscLpEnetLtFbTData AsciiString } mscLpEnetLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. mscLpEnetLtFbTxInfo OBJECT IDENTIFIER ::= { mscLpEnetLtFb 2 } mscLpEnetLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbTxInfo components." ::= { mscLpEnetLtFbTxInfo 1 } mscLpEnetLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbTxInfo component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbTxInfoIndex } ::= { mscLpEnetLtFbTxInfoRowStatusTable 1 } MscLpEnetLtFbTxInfoRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbTxInfoRowStatus RowStatus, mscLpEnetLtFbTxInfoComponentName DisplayString, mscLpEnetLtFbTxInfoStorageType StorageType, mscLpEnetLtFbTxInfoIndex NonReplicated } mscLpEnetLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbTxInfo components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbTxInfoRowStatusEntry 1 } mscLpEnetLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbTxInfoRowStatusEntry 2 } mscLpEnetLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbTxInfo tables." ::= { mscLpEnetLtFbTxInfoRowStatusEntry 4 } mscLpEnetLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbTxInfo tables." ::= { mscLpEnetLtFbTxInfoRowStatusEntry 10 } mscLpEnetLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbTxInfo 10 } mscLpEnetLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbTxInfoTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbTxInfoIndex } ::= { mscLpEnetLtFbTxInfoTopTable 1 } MscLpEnetLtFbTxInfoTopEntry ::= SEQUENCE { mscLpEnetLtFbTxInfoTData AsciiString } mscLpEnetLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. mscLpEnetLtFbFddiMac OBJECT IDENTIFIER ::= { mscLpEnetLtFb 3 } mscLpEnetLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbFddiMac components." ::= { mscLpEnetLtFbFddiMac 1 } mscLpEnetLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbFddiMac component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbFddiMacIndex } ::= { mscLpEnetLtFbFddiMacRowStatusTable 1 } MscLpEnetLtFbFddiMacRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbFddiMacRowStatus RowStatus, mscLpEnetLtFbFddiMacComponentName DisplayString, mscLpEnetLtFbFddiMacStorageType StorageType, mscLpEnetLtFbFddiMacIndex NonReplicated } mscLpEnetLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbFddiMac components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbFddiMacRowStatusEntry 1 } mscLpEnetLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbFddiMacRowStatusEntry 2 } mscLpEnetLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbFddiMac tables." ::= { mscLpEnetLtFbFddiMacRowStatusEntry 4 } mscLpEnetLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbFddiMac tables." ::= { mscLpEnetLtFbFddiMacRowStatusEntry 10 } mscLpEnetLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbFddiMac 10 } mscLpEnetLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbFddiMacTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbFddiMacIndex } ::= { mscLpEnetLtFbFddiMacTopTable 1 } MscLpEnetLtFbFddiMacTopEntry ::= SEQUENCE { mscLpEnetLtFbFddiMacTData AsciiString } mscLpEnetLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. mscLpEnetLtFbMacEnet OBJECT IDENTIFIER ::= { mscLpEnetLtFb 4 } mscLpEnetLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbMacEnet components." ::= { mscLpEnetLtFbMacEnet 1 } mscLpEnetLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbMacEnet component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbMacEnetIndex } ::= { mscLpEnetLtFbMacEnetRowStatusTable 1 } MscLpEnetLtFbMacEnetRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbMacEnetRowStatus RowStatus, mscLpEnetLtFbMacEnetComponentName DisplayString, mscLpEnetLtFbMacEnetStorageType StorageType, mscLpEnetLtFbMacEnetIndex NonReplicated } mscLpEnetLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbMacEnet components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbMacEnetRowStatusEntry 1 } mscLpEnetLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbMacEnetRowStatusEntry 2 } mscLpEnetLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbMacEnet tables." ::= { mscLpEnetLtFbMacEnetRowStatusEntry 4 } mscLpEnetLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbMacEnet tables." ::= { mscLpEnetLtFbMacEnetRowStatusEntry 10 } mscLpEnetLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbMacEnet 10 } mscLpEnetLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbMacEnetTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbMacEnetIndex } ::= { mscLpEnetLtFbMacEnetTopTable 1 } MscLpEnetLtFbMacEnetTopEntry ::= SEQUENCE { mscLpEnetLtFbMacEnetTData AsciiString } mscLpEnetLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. mscLpEnetLtFbMacTr OBJECT IDENTIFIER ::= { mscLpEnetLtFb 5 } mscLpEnetLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbMacTr components." ::= { mscLpEnetLtFbMacTr 1 } mscLpEnetLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbMacTr component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbMacTrIndex } ::= { mscLpEnetLtFbMacTrRowStatusTable 1 } MscLpEnetLtFbMacTrRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbMacTrRowStatus RowStatus, mscLpEnetLtFbMacTrComponentName DisplayString, mscLpEnetLtFbMacTrStorageType StorageType, mscLpEnetLtFbMacTrIndex NonReplicated } mscLpEnetLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbMacTr components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbMacTrRowStatusEntry 1 } mscLpEnetLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbMacTrRowStatusEntry 2 } mscLpEnetLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbMacTr tables." ::= { mscLpEnetLtFbMacTrRowStatusEntry 4 } mscLpEnetLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbMacTr tables." ::= { mscLpEnetLtFbMacTrRowStatusEntry 10 } mscLpEnetLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbMacTr 10 } mscLpEnetLtFbMacTrTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbMacTrTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbMacTrIndex } ::= { mscLpEnetLtFbMacTrTopTable 1 } MscLpEnetLtFbMacTrTopEntry ::= SEQUENCE { mscLpEnetLtFbMacTrTData AsciiString } mscLpEnetLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. mscLpEnetLtFbData OBJECT IDENTIFIER ::= { mscLpEnetLtFb 6 } mscLpEnetLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbData components." ::= { mscLpEnetLtFbData 1 } mscLpEnetLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbData component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbDataIndex } ::= { mscLpEnetLtFbDataRowStatusTable 1 } MscLpEnetLtFbDataRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbDataRowStatus RowStatus, mscLpEnetLtFbDataComponentName DisplayString, mscLpEnetLtFbDataStorageType StorageType, mscLpEnetLtFbDataIndex NonReplicated } mscLpEnetLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbData components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbDataRowStatusEntry 1 } mscLpEnetLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbDataRowStatusEntry 2 } mscLpEnetLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbData tables." ::= { mscLpEnetLtFbDataRowStatusEntry 4 } mscLpEnetLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbData tables." ::= { mscLpEnetLtFbDataRowStatusEntry 10 } mscLpEnetLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbData 10 } mscLpEnetLtFbDataTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbDataTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbDataIndex } ::= { mscLpEnetLtFbDataTopTable 1 } MscLpEnetLtFbDataTopEntry ::= SEQUENCE { mscLpEnetLtFbDataTData AsciiString } mscLpEnetLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. mscLpEnetLtFbIpH OBJECT IDENTIFIER ::= { mscLpEnetLtFb 7 } mscLpEnetLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbIpH components." ::= { mscLpEnetLtFbIpH 1 } mscLpEnetLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbIpH component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbIpHIndex } ::= { mscLpEnetLtFbIpHRowStatusTable 1 } MscLpEnetLtFbIpHRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbIpHRowStatus RowStatus, mscLpEnetLtFbIpHComponentName DisplayString, mscLpEnetLtFbIpHStorageType StorageType, mscLpEnetLtFbIpHIndex NonReplicated } mscLpEnetLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbIpH components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbIpHRowStatusEntry 1 } mscLpEnetLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbIpHRowStatusEntry 2 } mscLpEnetLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbIpH tables." ::= { mscLpEnetLtFbIpHRowStatusEntry 4 } mscLpEnetLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbIpH tables." ::= { mscLpEnetLtFbIpHRowStatusEntry 10 } mscLpEnetLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbIpH 10 } mscLpEnetLtFbIpHTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbIpHTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbIpHIndex } ::= { mscLpEnetLtFbIpHTopTable 1 } MscLpEnetLtFbIpHTopEntry ::= SEQUENCE { mscLpEnetLtFbIpHTData AsciiString } mscLpEnetLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. mscLpEnetLtFbLlch OBJECT IDENTIFIER ::= { mscLpEnetLtFb 8 } mscLpEnetLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbLlch components." ::= { mscLpEnetLtFbLlch 1 } mscLpEnetLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbLlch component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbLlchIndex } ::= { mscLpEnetLtFbLlchRowStatusTable 1 } MscLpEnetLtFbLlchRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbLlchRowStatus RowStatus, mscLpEnetLtFbLlchComponentName DisplayString, mscLpEnetLtFbLlchStorageType StorageType, mscLpEnetLtFbLlchIndex NonReplicated } mscLpEnetLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbLlch components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbLlchRowStatusEntry 1 } mscLpEnetLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbLlchRowStatusEntry 2 } mscLpEnetLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbLlch tables." ::= { mscLpEnetLtFbLlchRowStatusEntry 4 } mscLpEnetLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbLlch tables." ::= { mscLpEnetLtFbLlchRowStatusEntry 10 } mscLpEnetLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbLlch 10 } mscLpEnetLtFbLlchTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbLlchTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbLlchIndex } ::= { mscLpEnetLtFbLlchTopTable 1 } MscLpEnetLtFbLlchTopEntry ::= SEQUENCE { mscLpEnetLtFbLlchTData AsciiString } mscLpEnetLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. mscLpEnetLtFbAppleH OBJECT IDENTIFIER ::= { mscLpEnetLtFb 9 } mscLpEnetLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbAppleH components." ::= { mscLpEnetLtFbAppleH 1 } mscLpEnetLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbAppleH component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbAppleHIndex } ::= { mscLpEnetLtFbAppleHRowStatusTable 1 } MscLpEnetLtFbAppleHRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbAppleHRowStatus RowStatus, mscLpEnetLtFbAppleHComponentName DisplayString, mscLpEnetLtFbAppleHStorageType StorageType, mscLpEnetLtFbAppleHIndex NonReplicated } mscLpEnetLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbAppleH components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbAppleHRowStatusEntry 1 } mscLpEnetLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbAppleHRowStatusEntry 2 } mscLpEnetLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbAppleH tables." ::= { mscLpEnetLtFbAppleHRowStatusEntry 4 } mscLpEnetLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbAppleH tables." ::= { mscLpEnetLtFbAppleHRowStatusEntry 10 } mscLpEnetLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbAppleH 10 } mscLpEnetLtFbAppleHTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbAppleHTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbAppleHIndex } ::= { mscLpEnetLtFbAppleHTopTable 1 } MscLpEnetLtFbAppleHTopEntry ::= SEQUENCE { mscLpEnetLtFbAppleHTData AsciiString } mscLpEnetLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. mscLpEnetLtFbIpxH OBJECT IDENTIFIER ::= { mscLpEnetLtFb 10 } mscLpEnetLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtFbIpxH components." ::= { mscLpEnetLtFbIpxH 1 } mscLpEnetLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtFbIpxH component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbIpxHIndex } ::= { mscLpEnetLtFbIpxHRowStatusTable 1 } MscLpEnetLtFbIpxHRowStatusEntry ::= SEQUENCE { mscLpEnetLtFbIpxHRowStatus RowStatus, mscLpEnetLtFbIpxHComponentName DisplayString, mscLpEnetLtFbIpxHStorageType StorageType, mscLpEnetLtFbIpxHIndex NonReplicated } mscLpEnetLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtFbIpxH components. These components cannot be added nor deleted." ::= { mscLpEnetLtFbIpxHRowStatusEntry 1 } mscLpEnetLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtFbIpxHRowStatusEntry 2 } mscLpEnetLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtFbIpxH tables." ::= { mscLpEnetLtFbIpxHRowStatusEntry 4 } mscLpEnetLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtFbIpxH tables." ::= { mscLpEnetLtFbIpxHRowStatusEntry 10 } mscLpEnetLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtFbIpxH 10 } mscLpEnetLtFbIpxHTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtFbIpxHTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtFbIndex, mscLpEnetLtFbIpxHIndex } ::= { mscLpEnetLtFbIpxHTopTable 1 } MscLpEnetLtFbIpxHTopEntry ::= SEQUENCE { mscLpEnetLtFbIpxHTData AsciiString } mscLpEnetLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. mscLpEnetLtCntl OBJECT IDENTIFIER ::= { mscLpEnetLt 6 } mscLpEnetLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetLtCntl components." ::= { mscLpEnetLtCntl 1 } mscLpEnetLtCntlRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetLtCntl component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtCntlIndex } ::= { mscLpEnetLtCntlRowStatusTable 1 } MscLpEnetLtCntlRowStatusEntry ::= SEQUENCE { mscLpEnetLtCntlRowStatus RowStatus, mscLpEnetLtCntlComponentName DisplayString, mscLpEnetLtCntlStorageType StorageType, mscLpEnetLtCntlIndex NonReplicated } mscLpEnetLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetLtCntl components. These components cannot be added nor deleted." ::= { mscLpEnetLtCntlRowStatusEntry 1 } mscLpEnetLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetLtCntlRowStatusEntry 2 } mscLpEnetLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetLtCntl tables." ::= { mscLpEnetLtCntlRowStatusEntry 4 } mscLpEnetLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetLtCntl tables." ::= { mscLpEnetLtCntlRowStatusEntry 10 } mscLpEnetLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEnetLtCntl 10 } mscLpEnetLtCntlTopEntry OBJECT-TYPE SYNTAX MscLpEnetLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetLtCntlTopTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetLtIndex, mscLpEnetLtCntlIndex } ::= { mscLpEnetLtCntlTopTable 1 } MscLpEnetLtCntlTopEntry ::= SEQUENCE { mscLpEnetLtCntlTData AsciiString } mscLpEnetLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEnetLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. mscLpEnetTest OBJECT IDENTIFIER ::= { mscLpEnet 5 } mscLpEnetTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEnetTest components." ::= { mscLpEnetTest 1 } mscLpEnetTestRowStatusEntry OBJECT-TYPE SYNTAX MscLpEnetTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEnetTest component." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetTestIndex } ::= { mscLpEnetTestRowStatusTable 1 } MscLpEnetTestRowStatusEntry ::= SEQUENCE { mscLpEnetTestRowStatus RowStatus, mscLpEnetTestComponentName DisplayString, mscLpEnetTestStorageType StorageType, mscLpEnetTestIndex NonReplicated } mscLpEnetTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEnetTest components. These components cannot be added nor deleted." ::= { mscLpEnetTestRowStatusEntry 1 } mscLpEnetTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEnetTestRowStatusEntry 2 } mscLpEnetTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEnetTest tables." ::= { mscLpEnetTestRowStatusEntry 4 } mscLpEnetTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEnetTest tables." ::= { mscLpEnetTestRowStatusEntry 10 } mscLpEnetTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { mscLpEnetTest 10 } mscLpEnetTestPTOEntry OBJECT-TYPE SYNTAX MscLpEnetTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetTestPTOTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetTestIndex } ::= { mscLpEnetTestPTOTable 1 } MscLpEnetTestPTOEntry ::= SEQUENCE { mscLpEnetTestType INTEGER, mscLpEnetTestFrmSize Unsigned32, mscLpEnetTestDuration Unsigned32 } mscLpEnetTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { mscLpEnetTestPTOEntry 1 } mscLpEnetTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { mscLpEnetTestPTOEntry 2 } mscLpEnetTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { mscLpEnetTestPTOEntry 3 } mscLpEnetTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEnetTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { mscLpEnetTest 11 } mscLpEnetTestResultsEntry OBJECT-TYPE SYNTAX MscLpEnetTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEnetTestResultsTable." INDEX { mscLpIndex, mscLpEnetIndex, mscLpEnetTestIndex } ::= { mscLpEnetTestResultsTable 1 } MscLpEnetTestResultsEntry ::= SEQUENCE { mscLpEnetTestElapsedTime Counter32, mscLpEnetTestTimeRemaining Unsigned32, mscLpEnetTestCauseOfTermination INTEGER, mscLpEnetTestFrmTx PassportCounter64, mscLpEnetTestBitsTx PassportCounter64, mscLpEnetTestFrmRx PassportCounter64, mscLpEnetTestBitsRx PassportCounter64, mscLpEnetTestErroredFrmRx PassportCounter64 } mscLpEnetTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { mscLpEnetTestResultsEntry 4 } mscLpEnetTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { mscLpEnetTestResultsEntry 5 } mscLpEnetTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { mscLpEnetTestResultsEntry 6 } mscLpEnetTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpEnetTestResultsEntry 7 } mscLpEnetTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpEnetTestResultsEntry 8 } mscLpEnetTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEnetTestResultsEntry 9 } mscLpEnetTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEnetTestResultsEntry 10 } mscLpEnetTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEnetTestResultsEntry 11 } -- Lp/n Fddi/n -- This component defines an instance of a FDDI station attached to a ring. -- One instance of this component must be created for each hardware -- interface. Each station must be provisioned prior to inserting into the -- ring. mscLpFi OBJECT IDENTIFIER ::= { mscLp 4 } mscLpFiRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFi components." ::= { mscLpFi 1 } mscLpFiRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFi component." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiRowStatusTable 1 } MscLpFiRowStatusEntry ::= SEQUENCE { mscLpFiRowStatus RowStatus, mscLpFiComponentName DisplayString, mscLpFiStorageType StorageType, mscLpFiIndex Integer32 } mscLpFiRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFi components. These components can be added and deleted." ::= { mscLpFiRowStatusEntry 1 } mscLpFiComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiRowStatusEntry 2 } mscLpFiStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFi tables." ::= { mscLpFiRowStatusEntry 4 } mscLpFiIndex OBJECT-TYPE SYNTAX Integer32 (0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFi tables." ::= { mscLpFiRowStatusEntry 10 } mscLpFiCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscLpFi 10 } mscLpFiCidDataEntry OBJECT-TYPE SYNTAX MscLpFiCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiCidDataTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiCidDataTable 1 } MscLpFiCidDataEntry ::= SEQUENCE { mscLpFiCustomerIdentifier Unsigned32 } mscLpFiCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscLpFiCidDataEntry 1 } mscLpFiIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLpFi 11 } mscLpFiIfEntryEntry OBJECT-TYPE SYNTAX MscLpFiIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiIfEntryTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiIfEntryTable 1 } MscLpFiIfEntryEntry ::= SEQUENCE { mscLpFiIfAdminStatus INTEGER, mscLpFiIfIndex InterfaceIndex } mscLpFiIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpFiIfEntryEntry 1 } mscLpFiIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLpFiIfEntryEntry 2 } mscLpFiSmtProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiSmtProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable Station Management (SMT) attributes of the Fddi component." ::= { mscLpFi 12 } mscLpFiSmtProvEntry OBJECT-TYPE SYNTAX MscLpFiSmtProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiSmtProvTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiSmtProvTable 1 } MscLpFiSmtProvEntry ::= SEQUENCE { mscLpFiUserData AsciiString, mscLpFiAcceptAa INTEGER, mscLpFiAcceptBb INTEGER, mscLpFiAcceptAs INTEGER, mscLpFiAcceptBs INTEGER, mscLpFiAcceptAm INTEGER, mscLpFiAcceptBm INTEGER, mscLpFiUseThruBa INTEGER, mscLpFiNeighborNotifyInterval Unsigned32, mscLpFiStatusReportPolicy INTEGER, mscLpFiTraceMaxExpirationTimer FddiTimeMilli, mscLpFiApplicationFramerName Link } mscLpFiUserData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The user data field is used to identify the FDDI interface on the ring. The user data contains a message with a maximum of 32 characters." DEFVAL { '46444449'H } -- "FDDI" ::= { mscLpFiSmtProvEntry 1 } mscLpFiAcceptAa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAa attribute defines the station type A to station type A connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 2 } mscLpFiAcceptBb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBb attribute defines the station type B to station type B connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 3 } mscLpFiAcceptAs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAs attribute defines the station type A to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 4 } mscLpFiAcceptBs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBs attribute defines the station type B to station type S connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 5 } mscLpFiAcceptAm OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptAm attribute defines the station type A to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { enabled } ::= { mscLpFiSmtProvEntry 6 } mscLpFiAcceptBm OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The acceptBm attribute defines the station type B to station type M connection policy. If enabled, the connection will be accepted. If disabled, the connection will be rejected." DEFVAL { enabled } ::= { mscLpFiSmtProvEntry 7 } mscLpFiUseThruBa OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The useThruBa attribute is used to configure the requested path of the associated station. If enabled, only the secondary preferred path is permitted. If disabled, only the primary preferred path is permitted." DEFVAL { disabled } ::= { mscLpFiSmtProvEntry 8 } mscLpFiNeighborNotifyInterval OBJECT-TYPE SYNTAX Unsigned32 (2..30) ACCESS read-write STATUS mandatory DESCRIPTION "The neighborNotifyInterval attribute contains the amount of time, expressed in seconds, between neighbor notification frames." DEFVAL { 30 } ::= { mscLpFiSmtProvEntry 10 } mscLpFiStatusReportPolicy OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The statusReportPolicy attribute indicates whether or not the station will generate status reporting frames for its implemented events and conditions. If true, the station will generate the status frames. If false, the station will not generate the status frames." DEFVAL { true } ::= { mscLpFiSmtProvEntry 11 } mscLpFiTraceMaxExpirationTimer OBJECT-TYPE SYNTAX FddiTimeMilli (0..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "The traceMaxExpirationTimer attribute is used to configure the maximum propagation time, expressed in milliseconds, for a trace on a FDDI topology. This value places a lower bound on the detection time for an unrecovered ring." DEFVAL { 7000 } ::= { mscLpFiSmtProvEntry 12 } mscLpFiApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Fddi component. This defines which LanApplication/n Framer will be using this Fddi interface." ::= { mscLpFiSmtProvEntry 13 } mscLpFiMacProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiMacProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable MAC attributes of the Fddi component." ::= { mscLpFi 13 } mscLpFiMacProvEntry OBJECT-TYPE SYNTAX MscLpFiMacProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiMacProvTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiMacProvTable 1 } MscLpFiMacProvEntry ::= SEQUENCE { mscLpFiTokenRequestTimer FddiTimeNano, mscLpFiTokenMaxTimer FddiTimeNano, mscLpFiValidTransmissionTimer FddiTimeNano } mscLpFiTokenRequestTimer OBJECT-TYPE SYNTAX FddiTimeNano (20480..1340000000) ACCESS read-write STATUS mandatory DESCRIPTION "The tokenRequestTimer value contains the token request value assigned to the associated medium access controller (MAC). Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 165290000 } ::= { mscLpFiMacProvEntry 1 } mscLpFiTokenMaxTimer OBJECT-TYPE SYNTAX FddiTimeNano (40960..1342200000) ACCESS read-write STATUS mandatory DESCRIPTION "The tokenMaxTimer value is the maximum timer value the negotiated token rotation time may assume. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 167770000 } ::= { mscLpFiMacProvEntry 2 } mscLpFiValidTransmissionTimer OBJECT-TYPE SYNTAX FddiTimeNano (40960..1342200000) ACCESS read-write STATUS mandatory DESCRIPTION "The validTransmissionTimer (Tvx) value specifies the amount of time required for a valid transmission. The station must receive a valid transmission once every Tvx. Warning: Changes to this attribute can have adverse effects on the performance of the FDDI ring. Therefore it is recommended that this parameter only be modified by personnel with a thorough understanding of the consequences that may result from changes to this attribute." DEFVAL { 2621400 } ::= { mscLpFiMacProvEntry 3 } mscLpFiAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { mscLpFi 14 } mscLpFiAdminInfoEntry OBJECT-TYPE SYNTAX MscLpFiAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiAdminInfoTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiAdminInfoTable 1 } MscLpFiAdminInfoEntry ::= SEQUENCE { mscLpFiVendor AsciiString, mscLpFiCommentText AsciiString } mscLpFiVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { mscLpFiAdminInfoEntry 1 } mscLpFiCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { mscLpFiAdminInfoEntry 2 } mscLpFiStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLpFi 16 } mscLpFiStateEntry OBJECT-TYPE SYNTAX MscLpFiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiStateTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiStateTable 1 } MscLpFiStateEntry ::= SEQUENCE { mscLpFiAdminState INTEGER, mscLpFiOperationalState INTEGER, mscLpFiUsageState INTEGER } mscLpFiAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLpFiStateEntry 1 } mscLpFiOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLpFiStateEntry 2 } mscLpFiUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLpFiStateEntry 3 } mscLpFiOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLpFi 17 } mscLpFiOperStatusEntry OBJECT-TYPE SYNTAX MscLpFiOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiOperStatusTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiOperStatusTable 1 } MscLpFiOperStatusEntry ::= SEQUENCE { mscLpFiSnmpOperStatus INTEGER } mscLpFiSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpFiOperStatusEntry 1 } mscLpFiSmtOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiSmtOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational station management (SMT) attributes of the Fddi component." ::= { mscLpFi 18 } mscLpFiSmtOperEntry OBJECT-TYPE SYNTAX MscLpFiSmtOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiSmtOperTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiSmtOperTable 1 } MscLpFiSmtOperEntry ::= SEQUENCE { mscLpFiVersion AsciiString, mscLpFiBypassPresent INTEGER, mscLpFiEcmState INTEGER, mscLpFiCfState INTEGER } mscLpFiVersion OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The version attribute contains a copy of the currently supported version numbers of the management information base (MIB) and the station management (SMT)." ::= { mscLpFiSmtOperEntry 1 } mscLpFiBypassPresent OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The bypassPresent attribute indicates whether the optical bypass switch is present on its AB port pair. If true, the optical bypass switch is present. If false, it is not present." ::= { mscLpFiSmtOperEntry 14 } mscLpFiEcmState OBJECT-TYPE SYNTAX INTEGER { out(1), in(2), trace(3), leave(4), pathTest(5), insert(6), check(7), deinsert(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The ecmState, Entity Coordination Manager (ECM), state indicates the current state of the ECM state machine." ::= { mscLpFiSmtOperEntry 15 } mscLpFiCfState OBJECT-TYPE SYNTAX INTEGER { isolated(1), localA(2), localB(3), localAB(4), localS(5), wrapA(6), wrapB(7), wrapAB(8), wrapS(9), cWrapA(10), cWrapB(11), cWrapS(12), thru(13) } ACCESS read-only STATUS mandatory DESCRIPTION "The cfState attribute indicates the current state of the configuration management (CFM) state machine." ::= { mscLpFiSmtOperEntry 16 } mscLpFiMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational Medium Access Controller (MAC) attributes of the of the Fddi component." ::= { mscLpFi 19 } mscLpFiMacOperEntry OBJECT-TYPE SYNTAX MscLpFiMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiMacOperTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiMacOperTable 1 } MscLpFiMacOperEntry ::= SEQUENCE { mscLpFiRingLatency Gauge32, mscLpFiMacAddress FddiMACLongAddressType, mscLpFiUpstreamNeighbor FddiMACLongAddressType, mscLpFiDownstreamNeighbor FddiMACLongAddressType, mscLpFiOldUpstreamNeighbor FddiMACLongAddressType, mscLpFiOldDownstreamNeighbor FddiMACLongAddressType, mscLpFiDupAddressTest INTEGER, mscLpFiTokenNegotiatedTimer FddiTimeNano, mscLpFiFrameCounts Counter32, mscLpFiCopiedCounts Counter32, mscLpFiTransmitCounts Counter32, mscLpFiErrorCounts Counter32, mscLpFiLostCounts Counter32, mscLpFiRmtState INTEGER, mscLpFiFrameErrorFlag INTEGER } mscLpFiRingLatency OBJECT-TYPE SYNTAX Gauge32 (1280..1342000000) ACCESS read-only STATUS mandatory DESCRIPTION "The ringLatency attribute contains the measured ring latency of the ring the station is attached to." ::= { mscLpFiMacOperEntry 1 } mscLpFiMacAddress OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncMacAddress." ::= { mscLpFiMacOperEntry 10 } mscLpFiUpstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The upstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncUpstreamNeighbor." ::= { mscLpFiMacOperEntry 11 } mscLpFiDownstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The downstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncDownstreamNeighbor." ::= { mscLpFiMacOperEntry 12 } mscLpFiOldUpstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The oldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldUpstreamNeighbor." ::= { mscLpFiMacOperEntry 13 } mscLpFiOldDownstreamNeighbor OBJECT-TYPE SYNTAX FddiMACLongAddressType (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The oldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in canonical format. The non-canonical version of this address is indicated in ncOldDownstreamNeighbor." ::= { mscLpFiMacOperEntry 14 } mscLpFiDupAddressTest OBJECT-TYPE SYNTAX INTEGER { notDone(1), pass(2), fail(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The dupAddressTest attribute indicates the condition results of the duplicate address test. If notDone, the test has not been executed. If pass, the test has successfully executed. If fail, the test has failed." ::= { mscLpFiMacOperEntry 15 } mscLpFiTokenNegotiatedTimer OBJECT-TYPE SYNTAX FddiTimeNano (80..1340000000) ACCESS read-only STATUS mandatory DESCRIPTION "The tokenNegotiatedTimer specifies the negotiated token rotation time." DEFVAL { 167772000 } ::= { mscLpFiMacOperEntry 18 } mscLpFiFrameCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frameCounts attribute contains the number of frames that have been received by the station. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacOperEntry 19 } mscLpFiCopiedCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The copiedCounts attribute contains the number of frames successfully copied into this station's receive buffers, not including MAC control frames. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacOperEntry 20 } mscLpFiTransmitCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The transmitCounts attribute contains the number of frames transmitted by this station, not including MAC control frames. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacOperEntry 21 } mscLpFiErrorCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The errorCounts attribute contains the number of error frames first detected by this station. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacOperEntry 22 } mscLpFiLostCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lostCounts attribute contains the number of instances that the station has detected a format error during frame reception such that the frame was stripped. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacOperEntry 23 } mscLpFiRmtState OBJECT-TYPE SYNTAX INTEGER { isolated(1), nonOp(2), ringOp(3), detect(4), nonOpDup(5), ringOpDup(6), directed(7), trace(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The rmtState, ring management (RMT), state indicates the current state of the RMT state machine." ::= { mscLpFiMacOperEntry 25 } mscLpFiFrameErrorFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The frameErrorFlag attribute indicates the MAC frame error condition status. If true, a MAC frame error is present. If false, a MAC frame error condition is not present." ::= { mscLpFiMacOperEntry 28 } mscLpFiMacCOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiMacCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Medium Access Controller (MAC) Counters Table of the Fddi component." ::= { mscLpFi 20 } mscLpFiMacCOperEntry OBJECT-TYPE SYNTAX MscLpFiMacCOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiMacCOperTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiMacCOperTable 1 } MscLpFiMacCOperEntry ::= SEQUENCE { mscLpFiTokenCounts Counter32, mscLpFiTvxExpiredCounts Counter32, mscLpFiNotCopiedCounts Counter32, mscLpFiLateCounts Counter32, mscLpFiRingOpCounts Counter32 } mscLpFiTokenCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The tokenCounts attribute contains the number of times the station has received a token. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacCOperEntry 1 } mscLpFiTvxExpiredCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The tvxExpiredCounts, Transmission Valid eXpired (TVX), attribute contains the number of times that TVX timer has expired. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacCOperEntry 2 } mscLpFiNotCopiedCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The notCopiedCounts attribute contains the number of times that the station has detected a frame addressed to itself but did not copy it due to local buffer congestion. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacCOperEntry 3 } mscLpFiLateCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCounts attribute contains the number of token rotation time (TRT) expirations since the station was reset or a token was received. This counter may increment as stations go on and off the ring. A rapidly increasing value may indicate a problem. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiMacCOperEntry 4 } mscLpFiRingOpCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ringOpCounts attribute contains the number of times the station has made the transition from the ring not operational state to the ring operational state." ::= { mscLpFiMacCOperEntry 5 } mscLpFiNcMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Fddi component related to non-canonical MAC addresses." ::= { mscLpFi 26 } mscLpFiNcMacOperEntry OBJECT-TYPE SYNTAX MscLpFiNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiNcMacOperTable." INDEX { mscLpIndex, mscLpFiIndex } ::= { mscLpFiNcMacOperTable 1 } MscLpFiNcMacOperEntry ::= SEQUENCE { mscLpFiNcMacAddress MacAddress, mscLpFiNcUpstreamNeighbor MacAddress, mscLpFiNcDownstreamNeighbor MacAddress, mscLpFiNcOldUpstreamNeighbor MacAddress, mscLpFiNcOldDownstreamNeighbor MacAddress } mscLpFiNcMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The medium access controller (MAC) address is an address that is recognized by only one station on the attached ring. The value of this attribute is assigned by the system. This attribute is displayed in non- canonical format. The canonical version of this address is indicated in macAddress." ::= { mscLpFiNcMacOperEntry 1 } mscLpFiNcUpstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncUpstreamNeighbor attribute contains the MAC address associated with the upstream neighbor station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in upstreamNeighbor." ::= { mscLpFiNcMacOperEntry 2 } mscLpFiNcDownstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncDownstreamNeighbor attribute contains the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in downstreamNeighbor" ::= { mscLpFiNcMacOperEntry 3 } mscLpFiNcOldUpstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncOldUpstreamNeighbor attribute contains the previous value of the MAC address associated with the upstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldUpstreamNeighbor." ::= { mscLpFiNcMacOperEntry 4 } mscLpFiNcOldDownstreamNeighbor OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "The ncOldDownstreamNeighbor attribute contains the previous value of the MAC address associated with the downstream station on the ring. This attribute is displayed in non-canonical format. The canonical version of this address is indicated in oldDownstreamNeighbor." ::= { mscLpFiNcMacOperEntry 5 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. mscLpFiLt OBJECT IDENTIFIER ::= { mscLpFi 2 } mscLpFiLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLt components." ::= { mscLpFiLt 1 } mscLpFiLtRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLt component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex } ::= { mscLpFiLtRowStatusTable 1 } MscLpFiLtRowStatusEntry ::= SEQUENCE { mscLpFiLtRowStatus RowStatus, mscLpFiLtComponentName DisplayString, mscLpFiLtStorageType StorageType, mscLpFiLtIndex NonReplicated } mscLpFiLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLt components. These components cannot be added nor deleted." ::= { mscLpFiLtRowStatusEntry 1 } mscLpFiLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtRowStatusEntry 2 } mscLpFiLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLt tables." ::= { mscLpFiLtRowStatusEntry 4 } mscLpFiLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLt tables." ::= { mscLpFiLtRowStatusEntry 10 } mscLpFiLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLt 20 } mscLpFiLtTopEntry OBJECT-TYPE SYNTAX MscLpFiLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex } ::= { mscLpFiLtTopTable 1 } MscLpFiLtTopEntry ::= SEQUENCE { mscLpFiLtTData AsciiString } mscLpFiLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. mscLpFiLtFrmCmp OBJECT IDENTIFIER ::= { mscLpFiLt 2 } mscLpFiLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFrmCmp components." ::= { mscLpFiLtFrmCmp 1 } mscLpFiLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFrmCmp component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFrmCmpIndex } ::= { mscLpFiLtFrmCmpRowStatusTable 1 } MscLpFiLtFrmCmpRowStatusEntry ::= SEQUENCE { mscLpFiLtFrmCmpRowStatus RowStatus, mscLpFiLtFrmCmpComponentName DisplayString, mscLpFiLtFrmCmpStorageType StorageType, mscLpFiLtFrmCmpIndex NonReplicated } mscLpFiLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFrmCmp components. These components cannot be added nor deleted." ::= { mscLpFiLtFrmCmpRowStatusEntry 1 } mscLpFiLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFrmCmpRowStatusEntry 2 } mscLpFiLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFrmCmp tables." ::= { mscLpFiLtFrmCmpRowStatusEntry 4 } mscLpFiLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFrmCmp tables." ::= { mscLpFiLtFrmCmpRowStatusEntry 10 } mscLpFiLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFrmCmp 10 } mscLpFiLtFrmCmpTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFrmCmpTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFrmCmpIndex } ::= { mscLpFiLtFrmCmpTopTable 1 } MscLpFiLtFrmCmpTopEntry ::= SEQUENCE { mscLpFiLtFrmCmpTData AsciiString } mscLpFiLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. mscLpFiLtFrmCpy OBJECT IDENTIFIER ::= { mscLpFiLt 3 } mscLpFiLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFrmCpy components." ::= { mscLpFiLtFrmCpy 1 } mscLpFiLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFrmCpy component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFrmCpyIndex } ::= { mscLpFiLtFrmCpyRowStatusTable 1 } MscLpFiLtFrmCpyRowStatusEntry ::= SEQUENCE { mscLpFiLtFrmCpyRowStatus RowStatus, mscLpFiLtFrmCpyComponentName DisplayString, mscLpFiLtFrmCpyStorageType StorageType, mscLpFiLtFrmCpyIndex NonReplicated } mscLpFiLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFrmCpy components. These components cannot be added nor deleted." ::= { mscLpFiLtFrmCpyRowStatusEntry 1 } mscLpFiLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFrmCpyRowStatusEntry 2 } mscLpFiLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFrmCpy tables." ::= { mscLpFiLtFrmCpyRowStatusEntry 4 } mscLpFiLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFrmCpy tables." ::= { mscLpFiLtFrmCpyRowStatusEntry 10 } mscLpFiLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFrmCpy 10 } mscLpFiLtFrmCpyTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFrmCpyTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFrmCpyIndex } ::= { mscLpFiLtFrmCpyTopTable 1 } MscLpFiLtFrmCpyTopEntry ::= SEQUENCE { mscLpFiLtFrmCpyTData AsciiString } mscLpFiLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. mscLpFiLtPrtCfg OBJECT IDENTIFIER ::= { mscLpFiLt 4 } mscLpFiLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtPrtCfg components." ::= { mscLpFiLtPrtCfg 1 } mscLpFiLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtPrtCfg component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtPrtCfgIndex } ::= { mscLpFiLtPrtCfgRowStatusTable 1 } MscLpFiLtPrtCfgRowStatusEntry ::= SEQUENCE { mscLpFiLtPrtCfgRowStatus RowStatus, mscLpFiLtPrtCfgComponentName DisplayString, mscLpFiLtPrtCfgStorageType StorageType, mscLpFiLtPrtCfgIndex NonReplicated } mscLpFiLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtPrtCfg components. These components cannot be added nor deleted." ::= { mscLpFiLtPrtCfgRowStatusEntry 1 } mscLpFiLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtPrtCfgRowStatusEntry 2 } mscLpFiLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtPrtCfg tables." ::= { mscLpFiLtPrtCfgRowStatusEntry 4 } mscLpFiLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtPrtCfg tables." ::= { mscLpFiLtPrtCfgRowStatusEntry 10 } mscLpFiLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtPrtCfg 10 } mscLpFiLtPrtCfgTopEntry OBJECT-TYPE SYNTAX MscLpFiLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtPrtCfgTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtPrtCfgIndex } ::= { mscLpFiLtPrtCfgTopTable 1 } MscLpFiLtPrtCfgTopEntry ::= SEQUENCE { mscLpFiLtPrtCfgTData AsciiString } mscLpFiLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. mscLpFiLtFb OBJECT IDENTIFIER ::= { mscLpFiLt 5 } mscLpFiLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFb components." ::= { mscLpFiLtFb 1 } mscLpFiLtFbRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFb component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex } ::= { mscLpFiLtFbRowStatusTable 1 } MscLpFiLtFbRowStatusEntry ::= SEQUENCE { mscLpFiLtFbRowStatus RowStatus, mscLpFiLtFbComponentName DisplayString, mscLpFiLtFbStorageType StorageType, mscLpFiLtFbIndex NonReplicated } mscLpFiLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFb components. These components cannot be added nor deleted." ::= { mscLpFiLtFbRowStatusEntry 1 } mscLpFiLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbRowStatusEntry 2 } mscLpFiLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFb tables." ::= { mscLpFiLtFbRowStatusEntry 4 } mscLpFiLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFb tables." ::= { mscLpFiLtFbRowStatusEntry 10 } mscLpFiLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFb 20 } mscLpFiLtFbTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex } ::= { mscLpFiLtFbTopTable 1 } MscLpFiLtFbTopEntry ::= SEQUENCE { mscLpFiLtFbTData AsciiString } mscLpFiLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. mscLpFiLtFbTxInfo OBJECT IDENTIFIER ::= { mscLpFiLtFb 2 } mscLpFiLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbTxInfo components." ::= { mscLpFiLtFbTxInfo 1 } mscLpFiLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbTxInfo component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbTxInfoIndex } ::= { mscLpFiLtFbTxInfoRowStatusTable 1 } MscLpFiLtFbTxInfoRowStatusEntry ::= SEQUENCE { mscLpFiLtFbTxInfoRowStatus RowStatus, mscLpFiLtFbTxInfoComponentName DisplayString, mscLpFiLtFbTxInfoStorageType StorageType, mscLpFiLtFbTxInfoIndex NonReplicated } mscLpFiLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbTxInfo components. These components cannot be added nor deleted." ::= { mscLpFiLtFbTxInfoRowStatusEntry 1 } mscLpFiLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbTxInfoRowStatusEntry 2 } mscLpFiLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbTxInfo tables." ::= { mscLpFiLtFbTxInfoRowStatusEntry 4 } mscLpFiLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbTxInfo tables." ::= { mscLpFiLtFbTxInfoRowStatusEntry 10 } mscLpFiLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbTxInfo 10 } mscLpFiLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbTxInfoTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbTxInfoIndex } ::= { mscLpFiLtFbTxInfoTopTable 1 } MscLpFiLtFbTxInfoTopEntry ::= SEQUENCE { mscLpFiLtFbTxInfoTData AsciiString } mscLpFiLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. mscLpFiLtFbFddiMac OBJECT IDENTIFIER ::= { mscLpFiLtFb 3 } mscLpFiLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbFddiMac components." ::= { mscLpFiLtFbFddiMac 1 } mscLpFiLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbFddiMac component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbFddiMacIndex } ::= { mscLpFiLtFbFddiMacRowStatusTable 1 } MscLpFiLtFbFddiMacRowStatusEntry ::= SEQUENCE { mscLpFiLtFbFddiMacRowStatus RowStatus, mscLpFiLtFbFddiMacComponentName DisplayString, mscLpFiLtFbFddiMacStorageType StorageType, mscLpFiLtFbFddiMacIndex NonReplicated } mscLpFiLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbFddiMac components. These components cannot be added nor deleted." ::= { mscLpFiLtFbFddiMacRowStatusEntry 1 } mscLpFiLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbFddiMacRowStatusEntry 2 } mscLpFiLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbFddiMac tables." ::= { mscLpFiLtFbFddiMacRowStatusEntry 4 } mscLpFiLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbFddiMac tables." ::= { mscLpFiLtFbFddiMacRowStatusEntry 10 } mscLpFiLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbFddiMac 10 } mscLpFiLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbFddiMacTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbFddiMacIndex } ::= { mscLpFiLtFbFddiMacTopTable 1 } MscLpFiLtFbFddiMacTopEntry ::= SEQUENCE { mscLpFiLtFbFddiMacTData AsciiString } mscLpFiLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. mscLpFiLtFbMacEnet OBJECT IDENTIFIER ::= { mscLpFiLtFb 4 } mscLpFiLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbMacEnet components." ::= { mscLpFiLtFbMacEnet 1 } mscLpFiLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbMacEnet component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbMacEnetIndex } ::= { mscLpFiLtFbMacEnetRowStatusTable 1 } MscLpFiLtFbMacEnetRowStatusEntry ::= SEQUENCE { mscLpFiLtFbMacEnetRowStatus RowStatus, mscLpFiLtFbMacEnetComponentName DisplayString, mscLpFiLtFbMacEnetStorageType StorageType, mscLpFiLtFbMacEnetIndex NonReplicated } mscLpFiLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbMacEnet components. These components cannot be added nor deleted." ::= { mscLpFiLtFbMacEnetRowStatusEntry 1 } mscLpFiLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbMacEnetRowStatusEntry 2 } mscLpFiLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbMacEnet tables." ::= { mscLpFiLtFbMacEnetRowStatusEntry 4 } mscLpFiLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbMacEnet tables." ::= { mscLpFiLtFbMacEnetRowStatusEntry 10 } mscLpFiLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbMacEnet 10 } mscLpFiLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbMacEnetTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbMacEnetIndex } ::= { mscLpFiLtFbMacEnetTopTable 1 } MscLpFiLtFbMacEnetTopEntry ::= SEQUENCE { mscLpFiLtFbMacEnetTData AsciiString } mscLpFiLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. mscLpFiLtFbMacTr OBJECT IDENTIFIER ::= { mscLpFiLtFb 5 } mscLpFiLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbMacTr components." ::= { mscLpFiLtFbMacTr 1 } mscLpFiLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbMacTr component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbMacTrIndex } ::= { mscLpFiLtFbMacTrRowStatusTable 1 } MscLpFiLtFbMacTrRowStatusEntry ::= SEQUENCE { mscLpFiLtFbMacTrRowStatus RowStatus, mscLpFiLtFbMacTrComponentName DisplayString, mscLpFiLtFbMacTrStorageType StorageType, mscLpFiLtFbMacTrIndex NonReplicated } mscLpFiLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbMacTr components. These components cannot be added nor deleted." ::= { mscLpFiLtFbMacTrRowStatusEntry 1 } mscLpFiLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbMacTrRowStatusEntry 2 } mscLpFiLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbMacTr tables." ::= { mscLpFiLtFbMacTrRowStatusEntry 4 } mscLpFiLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbMacTr tables." ::= { mscLpFiLtFbMacTrRowStatusEntry 10 } mscLpFiLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbMacTr 10 } mscLpFiLtFbMacTrTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbMacTrTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbMacTrIndex } ::= { mscLpFiLtFbMacTrTopTable 1 } MscLpFiLtFbMacTrTopEntry ::= SEQUENCE { mscLpFiLtFbMacTrTData AsciiString } mscLpFiLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. mscLpFiLtFbData OBJECT IDENTIFIER ::= { mscLpFiLtFb 6 } mscLpFiLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbData components." ::= { mscLpFiLtFbData 1 } mscLpFiLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbData component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbDataIndex } ::= { mscLpFiLtFbDataRowStatusTable 1 } MscLpFiLtFbDataRowStatusEntry ::= SEQUENCE { mscLpFiLtFbDataRowStatus RowStatus, mscLpFiLtFbDataComponentName DisplayString, mscLpFiLtFbDataStorageType StorageType, mscLpFiLtFbDataIndex NonReplicated } mscLpFiLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbData components. These components cannot be added nor deleted." ::= { mscLpFiLtFbDataRowStatusEntry 1 } mscLpFiLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbDataRowStatusEntry 2 } mscLpFiLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbData tables." ::= { mscLpFiLtFbDataRowStatusEntry 4 } mscLpFiLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbData tables." ::= { mscLpFiLtFbDataRowStatusEntry 10 } mscLpFiLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbData 10 } mscLpFiLtFbDataTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbDataTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbDataIndex } ::= { mscLpFiLtFbDataTopTable 1 } MscLpFiLtFbDataTopEntry ::= SEQUENCE { mscLpFiLtFbDataTData AsciiString } mscLpFiLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. mscLpFiLtFbIpH OBJECT IDENTIFIER ::= { mscLpFiLtFb 7 } mscLpFiLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbIpH components." ::= { mscLpFiLtFbIpH 1 } mscLpFiLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbIpH component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbIpHIndex } ::= { mscLpFiLtFbIpHRowStatusTable 1 } MscLpFiLtFbIpHRowStatusEntry ::= SEQUENCE { mscLpFiLtFbIpHRowStatus RowStatus, mscLpFiLtFbIpHComponentName DisplayString, mscLpFiLtFbIpHStorageType StorageType, mscLpFiLtFbIpHIndex NonReplicated } mscLpFiLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbIpH components. These components cannot be added nor deleted." ::= { mscLpFiLtFbIpHRowStatusEntry 1 } mscLpFiLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbIpHRowStatusEntry 2 } mscLpFiLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbIpH tables." ::= { mscLpFiLtFbIpHRowStatusEntry 4 } mscLpFiLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbIpH tables." ::= { mscLpFiLtFbIpHRowStatusEntry 10 } mscLpFiLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbIpH 10 } mscLpFiLtFbIpHTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbIpHTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbIpHIndex } ::= { mscLpFiLtFbIpHTopTable 1 } MscLpFiLtFbIpHTopEntry ::= SEQUENCE { mscLpFiLtFbIpHTData AsciiString } mscLpFiLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. mscLpFiLtFbLlch OBJECT IDENTIFIER ::= { mscLpFiLtFb 8 } mscLpFiLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbLlch components." ::= { mscLpFiLtFbLlch 1 } mscLpFiLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbLlch component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbLlchIndex } ::= { mscLpFiLtFbLlchRowStatusTable 1 } MscLpFiLtFbLlchRowStatusEntry ::= SEQUENCE { mscLpFiLtFbLlchRowStatus RowStatus, mscLpFiLtFbLlchComponentName DisplayString, mscLpFiLtFbLlchStorageType StorageType, mscLpFiLtFbLlchIndex NonReplicated } mscLpFiLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbLlch components. These components cannot be added nor deleted." ::= { mscLpFiLtFbLlchRowStatusEntry 1 } mscLpFiLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbLlchRowStatusEntry 2 } mscLpFiLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbLlch tables." ::= { mscLpFiLtFbLlchRowStatusEntry 4 } mscLpFiLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbLlch tables." ::= { mscLpFiLtFbLlchRowStatusEntry 10 } mscLpFiLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbLlch 10 } mscLpFiLtFbLlchTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbLlchTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbLlchIndex } ::= { mscLpFiLtFbLlchTopTable 1 } MscLpFiLtFbLlchTopEntry ::= SEQUENCE { mscLpFiLtFbLlchTData AsciiString } mscLpFiLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. mscLpFiLtFbAppleH OBJECT IDENTIFIER ::= { mscLpFiLtFb 9 } mscLpFiLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbAppleH components." ::= { mscLpFiLtFbAppleH 1 } mscLpFiLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbAppleH component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbAppleHIndex } ::= { mscLpFiLtFbAppleHRowStatusTable 1 } MscLpFiLtFbAppleHRowStatusEntry ::= SEQUENCE { mscLpFiLtFbAppleHRowStatus RowStatus, mscLpFiLtFbAppleHComponentName DisplayString, mscLpFiLtFbAppleHStorageType StorageType, mscLpFiLtFbAppleHIndex NonReplicated } mscLpFiLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbAppleH components. These components cannot be added nor deleted." ::= { mscLpFiLtFbAppleHRowStatusEntry 1 } mscLpFiLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbAppleHRowStatusEntry 2 } mscLpFiLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbAppleH tables." ::= { mscLpFiLtFbAppleHRowStatusEntry 4 } mscLpFiLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbAppleH tables." ::= { mscLpFiLtFbAppleHRowStatusEntry 10 } mscLpFiLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbAppleH 10 } mscLpFiLtFbAppleHTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbAppleHTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbAppleHIndex } ::= { mscLpFiLtFbAppleHTopTable 1 } MscLpFiLtFbAppleHTopEntry ::= SEQUENCE { mscLpFiLtFbAppleHTData AsciiString } mscLpFiLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. mscLpFiLtFbIpxH OBJECT IDENTIFIER ::= { mscLpFiLtFb 10 } mscLpFiLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtFbIpxH components." ::= { mscLpFiLtFbIpxH 1 } mscLpFiLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtFbIpxH component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbIpxHIndex } ::= { mscLpFiLtFbIpxHRowStatusTable 1 } MscLpFiLtFbIpxHRowStatusEntry ::= SEQUENCE { mscLpFiLtFbIpxHRowStatus RowStatus, mscLpFiLtFbIpxHComponentName DisplayString, mscLpFiLtFbIpxHStorageType StorageType, mscLpFiLtFbIpxHIndex NonReplicated } mscLpFiLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtFbIpxH components. These components cannot be added nor deleted." ::= { mscLpFiLtFbIpxHRowStatusEntry 1 } mscLpFiLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtFbIpxHRowStatusEntry 2 } mscLpFiLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtFbIpxH tables." ::= { mscLpFiLtFbIpxHRowStatusEntry 4 } mscLpFiLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtFbIpxH tables." ::= { mscLpFiLtFbIpxHRowStatusEntry 10 } mscLpFiLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtFbIpxH 10 } mscLpFiLtFbIpxHTopEntry OBJECT-TYPE SYNTAX MscLpFiLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtFbIpxHTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtFbIndex, mscLpFiLtFbIpxHIndex } ::= { mscLpFiLtFbIpxHTopTable 1 } MscLpFiLtFbIpxHTopEntry ::= SEQUENCE { mscLpFiLtFbIpxHTData AsciiString } mscLpFiLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. mscLpFiLtCntl OBJECT IDENTIFIER ::= { mscLpFiLt 6 } mscLpFiLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiLtCntl components." ::= { mscLpFiLtCntl 1 } mscLpFiLtCntlRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiLtCntl component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtCntlIndex } ::= { mscLpFiLtCntlRowStatusTable 1 } MscLpFiLtCntlRowStatusEntry ::= SEQUENCE { mscLpFiLtCntlRowStatus RowStatus, mscLpFiLtCntlComponentName DisplayString, mscLpFiLtCntlStorageType StorageType, mscLpFiLtCntlIndex NonReplicated } mscLpFiLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiLtCntl components. These components cannot be added nor deleted." ::= { mscLpFiLtCntlRowStatusEntry 1 } mscLpFiLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiLtCntlRowStatusEntry 2 } mscLpFiLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiLtCntl tables." ::= { mscLpFiLtCntlRowStatusEntry 4 } mscLpFiLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiLtCntl tables." ::= { mscLpFiLtCntlRowStatusEntry 10 } mscLpFiLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpFiLtCntl 10 } mscLpFiLtCntlTopEntry OBJECT-TYPE SYNTAX MscLpFiLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiLtCntlTopTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiLtIndex, mscLpFiLtCntlIndex } ::= { mscLpFiLtCntlTopTable 1 } MscLpFiLtCntlTopEntry ::= SEQUENCE { mscLpFiLtCntlTData AsciiString } mscLpFiLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpFiLtCntlTopEntry 1 } -- Lp/n Fddi/n Phy/x -- This component defines an instance of a FDDI port attached to a ring. -- Two instances of this component must be provisioned for each hardware -- port. Each port must be provisioned prior to inserting into the ring. mscLpFiPhy OBJECT IDENTIFIER ::= { mscLpFi 3 } mscLpFiPhyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiPhyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiPhy components." ::= { mscLpFiPhy 1 } mscLpFiPhyRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiPhyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiPhy component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiPhyFddiPhyTypeIndex } ::= { mscLpFiPhyRowStatusTable 1 } MscLpFiPhyRowStatusEntry ::= SEQUENCE { mscLpFiPhyRowStatus RowStatus, mscLpFiPhyComponentName DisplayString, mscLpFiPhyStorageType StorageType, mscLpFiPhyFddiPhyTypeIndex INTEGER } mscLpFiPhyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiPhy components. These components can be added." ::= { mscLpFiPhyRowStatusEntry 1 } mscLpFiPhyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiPhyRowStatusEntry 2 } mscLpFiPhyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiPhy tables." ::= { mscLpFiPhyRowStatusEntry 4 } mscLpFiPhyFddiPhyTypeIndex OBJECT-TYPE SYNTAX INTEGER { a(0), b(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiPhy tables." ::= { mscLpFiPhyRowStatusEntry 10 } mscLpFiPhyProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiPhyProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Fddi Phy component." ::= { mscLpFiPhy 10 } mscLpFiPhyProvEntry OBJECT-TYPE SYNTAX MscLpFiPhyProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiPhyProvTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiPhyFddiPhyTypeIndex } ::= { mscLpFiPhyProvTable 1 } MscLpFiPhyProvEntry ::= SEQUENCE { mscLpFiPhyLerCutoff Unsigned32, mscLpFiPhyLerAlarm Unsigned32, mscLpFiPhyLinkErrorMonitor INTEGER } mscLpFiPhyLerCutoff OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-write STATUS mandatory DESCRIPTION "The lerCutoff attribute contains the link error rate estimate at which a link connection will be broken. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported." DEFVAL { 7 } ::= { mscLpFiPhyProvEntry 1 } mscLpFiPhyLerAlarm OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-write STATUS mandatory DESCRIPTION "The lerAlarm attribute contains the link error rate estimate at which a link connection will generate an alarm. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported" DEFVAL { 8 } ::= { mscLpFiPhyProvEntry 2 } mscLpFiPhyLinkErrorMonitor OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The linkErrorMonitor attribute is used to select the state of the link error monitor for the associated Phy component. If enabled, the link error monitor will send the correct test status to the neighboring station. If disabled, the link error monitor will always send a test passed status to the neighboring station." DEFVAL { enabled } ::= { mscLpFiPhyProvEntry 3 } mscLpFiPhyOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiPhyOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Fddi Phy component." ::= { mscLpFiPhy 11 } mscLpFiPhyOperEntry OBJECT-TYPE SYNTAX MscLpFiPhyOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiPhyOperTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiPhyFddiPhyTypeIndex } ::= { mscLpFiPhyOperTable 1 } MscLpFiPhyOperEntry ::= SEQUENCE { mscLpFiPhyNeighborType INTEGER, mscLpFiPhyLctFailCounts Counter32, mscLpFiPhyLerEstimate Unsigned32, mscLpFiPhyLemRejectCounts Counter32, mscLpFiPhyLemCounts Counter32, mscLpFiPhyPcmState INTEGER, mscLpFiPhyLerFlag INTEGER, mscLpFiPhySignalState INTEGER, mscLpFiPhySignalBitsRcvd OCTET STRING, mscLpFiPhySignalBitsTxmt OCTET STRING } mscLpFiPhyNeighborType OBJECT-TYPE SYNTAX INTEGER { a(1), b(2), s(3), m(4), none(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the neighbor type of the neighbor physical layer." ::= { mscLpFiPhyOperEntry 4 } mscLpFiPhyLctFailCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lctFailCounts attribute contains the number of consecutive times the Link Confidence Test (LCT) has failed. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiPhyOperEntry 13 } mscLpFiPhyLerEstimate OBJECT-TYPE SYNTAX Unsigned32 (4..15) ACCESS read-only STATUS mandatory DESCRIPTION "The lerEstimate attribute contains a long term average link error rate. The values will range from 10**-4 to 10**-15. Only the absolute value of the base 10 log is reported" ::= { mscLpFiPhyOperEntry 14 } mscLpFiPhyLemRejectCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lemRejectCounts attribute contains the number of times that a link has been rejected. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiPhyOperEntry 15 } mscLpFiPhyLemCounts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lemCounts attribute contains the aggregate link error monitor error count. This counter is set to zero only on station initialization. This counter will wrap around after it reaches its maximum value." ::= { mscLpFiPhyOperEntry 16 } mscLpFiPhyPcmState OBJECT-TYPE SYNTAX INTEGER { off(1), break(2), trace(3), connect(4), next(5), signal(6), join(7), verify(8), active(9), maint(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The pcmState, physical connection manager (PCM), state indicates the current state of the PCM state machine." ::= { mscLpFiPhyOperEntry 18 } mscLpFiPhyLerFlag OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The lerFlag attribute indicates when the link error rate estimate is less than or equal to the link error rate alarm. If true, the value of the link error rate estimate is less than or equal to the link error rate alarm. If false, the value of the link error rate estimate is greater than the link error rate alarm." ::= { mscLpFiPhyOperEntry 20 } mscLpFiPhySignalState OBJECT-TYPE SYNTAX INTEGER { escape(0), phyTypeL(1), phyTypeH(2), accept(3), lctLengthL(4), lctLengthH(5), macAvail(6), lctResult(7), macLoop(8), macOnPhy(9), signalingDone(10) } ACCESS read-only STATUS mandatory DESCRIPTION "The signalState attribute contains the current physical connection manager (PCM) signal bit being transmitted, or was transmitted, during the PCM signal state." ::= { mscLpFiPhyOperEntry 23 } mscLpFiPhySignalBitsRcvd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The signalBitsRcvd attribute contains the current physical connection manager (PCM) signal bits received. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)" ::= { mscLpFiPhyOperEntry 24 } mscLpFiPhySignalBitsTxmt OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The signalBitsTxmt attribute contains the current physical connection manager (PCM) signal bits transmitted. Description of bits: escape(0) phyTypeL(1) phyTypeH(2) accept(3) lctLengthL(4) lctLengthH(5) macAvail(6) lctResult(7) macLoop(8) macOnPhy(9)" ::= { mscLpFiPhyOperEntry 25 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. mscLpFiTest OBJECT IDENTIFIER ::= { mscLpFi 5 } mscLpFiTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpFiTest components." ::= { mscLpFiTest 1 } mscLpFiTestRowStatusEntry OBJECT-TYPE SYNTAX MscLpFiTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpFiTest component." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiTestIndex } ::= { mscLpFiTestRowStatusTable 1 } MscLpFiTestRowStatusEntry ::= SEQUENCE { mscLpFiTestRowStatus RowStatus, mscLpFiTestComponentName DisplayString, mscLpFiTestStorageType StorageType, mscLpFiTestIndex NonReplicated } mscLpFiTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpFiTest components. These components cannot be added nor deleted." ::= { mscLpFiTestRowStatusEntry 1 } mscLpFiTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpFiTestRowStatusEntry 2 } mscLpFiTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpFiTest tables." ::= { mscLpFiTestRowStatusEntry 4 } mscLpFiTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpFiTest tables." ::= { mscLpFiTestRowStatusEntry 10 } mscLpFiTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { mscLpFiTest 10 } mscLpFiTestPTOEntry OBJECT-TYPE SYNTAX MscLpFiTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiTestPTOTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiTestIndex } ::= { mscLpFiTestPTOTable 1 } MscLpFiTestPTOEntry ::= SEQUENCE { mscLpFiTestType INTEGER, mscLpFiTestFrmSize Unsigned32, mscLpFiTestDuration Unsigned32 } mscLpFiTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { mscLpFiTestPTOEntry 1 } mscLpFiTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { mscLpFiTestPTOEntry 2 } mscLpFiTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { mscLpFiTestPTOEntry 3 } mscLpFiTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpFiTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { mscLpFiTest 11 } mscLpFiTestResultsEntry OBJECT-TYPE SYNTAX MscLpFiTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpFiTestResultsTable." INDEX { mscLpIndex, mscLpFiIndex, mscLpFiTestIndex } ::= { mscLpFiTestResultsTable 1 } MscLpFiTestResultsEntry ::= SEQUENCE { mscLpFiTestElapsedTime Counter32, mscLpFiTestTimeRemaining Unsigned32, mscLpFiTestCauseOfTermination INTEGER, mscLpFiTestFrmTx PassportCounter64, mscLpFiTestBitsTx PassportCounter64, mscLpFiTestFrmRx PassportCounter64, mscLpFiTestBitsRx PassportCounter64, mscLpFiTestErroredFrmRx PassportCounter64 } mscLpFiTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { mscLpFiTestResultsEntry 4 } mscLpFiTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { mscLpFiTestResultsEntry 5 } mscLpFiTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { mscLpFiTestResultsEntry 6 } mscLpFiTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpFiTestResultsEntry 7 } mscLpFiTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpFiTestResultsEntry 8 } mscLpFiTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpFiTestResultsEntry 9 } mscLpFiTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpFiTestResultsEntry 10 } mscLpFiTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpFiTestResultsEntry 11 } -- Lp/n TokenRing/n -- This component defines an instance of a Token Ring interface -- attached to a ring. One instance of this component must be created -- for each hardware interface. Each interface must be provisioned -- prior to inserting into the ring. mscLpTr OBJECT IDENTIFIER ::= { mscLp 13 } mscLpTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTr components." ::= { mscLpTr 1 } mscLpTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTr component." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrRowStatusTable 1 } MscLpTrRowStatusEntry ::= SEQUENCE { mscLpTrRowStatus RowStatus, mscLpTrComponentName DisplayString, mscLpTrStorageType StorageType, mscLpTrIndex Integer32 } mscLpTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTr components. These components can be added and deleted." ::= { mscLpTrRowStatusEntry 1 } mscLpTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrRowStatusEntry 2 } mscLpTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTr tables." ::= { mscLpTrRowStatusEntry 4 } mscLpTrIndex OBJECT-TYPE SYNTAX Integer32 (0..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTr tables." ::= { mscLpTrRowStatusEntry 10 } mscLpTrCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscLpTr 10 } mscLpTrCidDataEntry OBJECT-TYPE SYNTAX MscLpTrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrCidDataTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrCidDataTable 1 } MscLpTrCidDataEntry ::= SEQUENCE { mscLpTrCustomerIdentifier Unsigned32 } mscLpTrCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscLpTrCidDataEntry 1 } mscLpTrIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLpTr 11 } mscLpTrIfEntryEntry OBJECT-TYPE SYNTAX MscLpTrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrIfEntryTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrIfEntryTable 1 } MscLpTrIfEntryEntry ::= SEQUENCE { mscLpTrIfAdminStatus INTEGER, mscLpTrIfIndex InterfaceIndex } mscLpTrIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpTrIfEntryEntry 1 } mscLpTrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLpTrIfEntryEntry 2 } mscLpTrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Token Ring port." ::= { mscLpTr 12 } mscLpTrProvEntry OBJECT-TYPE SYNTAX MscLpTrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrProvTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrProvTable 1 } MscLpTrProvEntry ::= SEQUENCE { mscLpTrRingSpeed INTEGER, mscLpTrMonitorParticipate INTEGER, mscLpTrFunctionalAddress MacAddress, mscLpTrNodeAddress MacAddress, mscLpTrGroupAddress MacAddress, mscLpTrProductId AsciiString, mscLpTrApplicationFramerName Link } mscLpTrRingSpeed OBJECT-TYPE SYNTAX INTEGER { fourMegabit(3), sixteenMegabit(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the ring speed at the next insertion into the ring. Note that all the interfaces on a ring must operate at the same speed." DEFVAL { sixteenMegabit } ::= { mscLpTrProvEntry 1 } mscLpTrMonitorParticipate OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines whether the interface will participate in the active monitor selection process." DEFVAL { false } ::= { mscLpTrProvEntry 2 } mscLpTrFunctionalAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a bit mask of all token ring functional addresses for which this interface will accept frames. The address is displayed in canonical form." DEFVAL { '0300feff8f01'H } ::= { mscLpTrProvEntry 3 } mscLpTrNodeAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the primary, node specific address recognized by this interface. If an operator does not provision a MAC address, the interface will use a predefined, permanently assigned address. A valid node address must not be any of the following: a broadcast address, a group address, a functional address or a null address. A node address should be entered in the canonical form." DEFVAL { '000000000000'H } ::= { mscLpTrProvEntry 4 } mscLpTrGroupAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the group address for which this interface will accept frames. The address is displayed in canonical form. For a valid group address, the least significant bit of the first octet should be set to 1. Currently, only one group address can be provisioned for one interface." DEFVAL { '030001000000'H } ::= { mscLpTrProvEntry 5 } mscLpTrProductId OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to identify the host system attached to this interface. This information is transmitted in response to Request Station Attachment MAC frames." DEFVAL { '4c414e20546f6b656e2052696e67'H } -- "LAN Token Ring" ::= { mscLpTrProvEntry 6 } mscLpTrApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Tr component." ::= { mscLpTrProvEntry 7 } mscLpTrAdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { mscLpTr 13 } mscLpTrAdminInfoEntry OBJECT-TYPE SYNTAX MscLpTrAdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrAdminInfoTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrAdminInfoTable 1 } MscLpTrAdminInfoEntry ::= SEQUENCE { mscLpTrVendor AsciiString, mscLpTrCommentText AsciiString } mscLpTrVendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { mscLpTrAdminInfoEntry 1 } mscLpTrCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { mscLpTrAdminInfoEntry 2 } mscLpTrStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLpTr 15 } mscLpTrStateEntry OBJECT-TYPE SYNTAX MscLpTrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrStateTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrStateTable 1 } MscLpTrStateEntry ::= SEQUENCE { mscLpTrAdminState INTEGER, mscLpTrOperationalState INTEGER, mscLpTrUsageState INTEGER } mscLpTrAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLpTrStateEntry 1 } mscLpTrOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLpTrStateEntry 2 } mscLpTrUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLpTrStateEntry 3 } mscLpTrOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLpTr 16 } mscLpTrOperStatusEntry OBJECT-TYPE SYNTAX MscLpTrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrOperStatusTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrOperStatusTable 1 } MscLpTrOperStatusEntry ::= SEQUENCE { mscLpTrSnmpOperStatus INTEGER } mscLpTrSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpTrOperStatusEntry 1 } mscLpTrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Token Ring component." ::= { mscLpTr 17 } mscLpTrOperEntry OBJECT-TYPE SYNTAX MscLpTrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrOperTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrOperTable 1 } MscLpTrOperEntry ::= SEQUENCE { mscLpTrMacAddress MacAddress, mscLpTrRingState INTEGER, mscLpTrRingStatus OCTET STRING, mscLpTrRingOpenStatus INTEGER, mscLpTrUpStream MacAddress, mscLpTrChipSet INTEGER, mscLpTrLastTimeBeaconSent EnterpriseDateAndTime } mscLpTrMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in canonical form. The non-canonical version of this address is indicated in ncMacAddress." DEFVAL { '000000000000'H } ::= { mscLpTrOperEntry 2 } mscLpTrRingState OBJECT-TYPE SYNTAX INTEGER { opened(1), closed(2), opening(3), closing(4), openFailure(5), ringFailure(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of the current interface state with respect to entering or leaving the ring." DEFVAL { ringFailure } ::= { mscLpTrOperEntry 4 } mscLpTrRingStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the value of the current interface status after the station has entered the ring. The value is a sum of values, one for each currently applicable condition. Before the station attempts an open this attribute has the value of noStatus. noProblems = 0, ringRecovery = 32, singleStation = 64, removeReceived = 256, reserved = 512, autoRemovalError = 1024, lobeWireFault = 2048, transmitBeacon = 4096, softError = 8192, hardError = 16384, signalLoss = 32768, noStatus = 131072 Description of bits: noProblems(0) notused1(1) notused2(2) notused3(3) notused4(4) ringRecovery(5) singleStation(6) notused7(7) removeReceived(8) reserved(9) autoRemovalError(10) lobeWireFault(11) transmitBeacon(12) softError(13) hardError(14) signalLoss(15) notused16(16) noStatus(17)" DEFVAL { '000040'H } ::= { mscLpTrOperEntry 5 } mscLpTrRingOpenStatus OBJECT-TYPE SYNTAX INTEGER { noOpen(1), badParam(2), lobeFailed(3), signalLoss(4), insertionTimeout(5), ringFailed(6), beaconing(7), duplicateMac(8), requestFailed(9), removeReceived(10), open(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates what happened the last time the station attempted to enter into the ring." DEFVAL { noOpen } ::= { mscLpTrOperEntry 6 } mscLpTrUpStream OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in canonical form. The non- canonical version of this address is indicated in ncUpStream." DEFVAL { '000000000000'H } ::= { mscLpTrOperEntry 7 } mscLpTrChipSet OBJECT-TYPE SYNTAX INTEGER { ibm16(1), titms380(2), titms380c16(3), titms380c26(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies the hardware chip set in use by an interface." DEFVAL { titms380c16 } ::= { mscLpTrOperEntry 9 } mscLpTrLastTimeBeaconSent OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time at which a Beacon frame was last transmitted on this interface." ::= { mscLpTrOperEntry 10 } mscLpTrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical information for the Token Ring port." ::= { mscLpTr 18 } mscLpTrStatsEntry OBJECT-TYPE SYNTAX MscLpTrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrStatsTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrStatsTable 1 } MscLpTrStatsEntry ::= SEQUENCE { mscLpTrLineErrors Counter32, mscLpTrBurstErrors Counter32, mscLpTrAcErrors Counter32, mscLpTrAbortTransErrors Counter32, mscLpTrInternalErrors Counter32, mscLpTrLostFrameErrors Counter32, mscLpTrReceiveCongestions Counter32, mscLpTrFrameCopiedErrors Counter32, mscLpTrTokenErrors Counter32, mscLpTrSoftErrors Counter32, mscLpTrHardErrors Counter32, mscLpTrSignalLoss Counter32, mscLpTrTransmitBeacons Counter32, mscLpTrRingRecoverys Counter32, mscLpTrLobeWires Counter32, mscLpTrRemoveRings Counter32, mscLpTrSingleStation Counter32, mscLpTrFreqErrors Counter32 } mscLpTrLineErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of frames or tokens copied or repeated by a station where there is a non-data bit or a FCS error. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 2 } mscLpTrBurstErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the station detects the absence of transitions for five consecutive half-bit times. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 3 } mscLpTrAcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times that a station can not set the AC bits properly. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 4 } mscLpTrAbortTransErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of aborted frames. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 5 } mscLpTrInternalErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of internal errors. When the value of the counter soars up quickly, it indicates a potential hardware problem. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 6 } mscLpTrLostFrameErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station is transmitting and its TRR timer expires. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 7 } mscLpTrReceiveCongestions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station is supposed to receive a frame but cannot due to lack of buffer space. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 8 } mscLpTrFrameCopiedErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station receives a frame addressed to its specific address and detects that the A bit is set. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 9 } mscLpTrTokenErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times a station acting as the active monitor recognizes an error condition that needs a token transmission. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 10 } mscLpTrSoftErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of soft errors or the number of Report Error Mac frames the station has transmitted. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 11 } mscLpTrHardErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times this interface has detected an immediately recoverable fatal error. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 12 } mscLpTrSignalLoss OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times signal condition has been lost. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 13 } mscLpTrTransmitBeacons OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of beacon frames transmitted. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 14 } mscLpTrRingRecoverys OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the ring has been purged. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 15 } mscLpTrLobeWires OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the interface has detected a short circuit in the lobe data path. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 16 } mscLpTrRemoveRings OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of Remove Ring Station Mac frames received. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 17 } mscLpTrSingleStation OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of times the station has determined it is the only one on the ring. This is not necessarily an error. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 18 } mscLpTrFreqErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the number of signal frequency errors detected. This counter wraps around when the maximum value is reached." ::= { mscLpTrStatsEntry 19 } mscLpTrNcMacOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the TokenRing port component related to non-canonical MAC addresses." ::= { mscLpTr 20 } mscLpTrNcMacOperEntry OBJECT-TYPE SYNTAX MscLpTrNcMacOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrNcMacOperTable." INDEX { mscLpIndex, mscLpTrIndex } ::= { mscLpTrNcMacOperTable 1 } MscLpTrNcMacOperEntry ::= SEQUENCE { mscLpTrNcMacAddress MacAddress, mscLpTrNcUpStream MacAddress } mscLpTrNcMacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the actual MAC address. The value is assigned by the system if nodeAddress is not provisioned. This address is displayed in non-canonical form. The canonical version of this address is indicated in macAddress." ::= { mscLpTrNcMacOperEntry 1 } mscLpTrNcUpStream OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the MAC address of the station's up-stream neighbor. This address is displayed in non-canonical form. The canonical version of this address is indicated in upStream." ::= { mscLpTrNcMacOperEntry 2 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. mscLpTrLt OBJECT IDENTIFIER ::= { mscLpTr 2 } mscLpTrLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLt components." ::= { mscLpTrLt 1 } mscLpTrLtRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLt component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex } ::= { mscLpTrLtRowStatusTable 1 } MscLpTrLtRowStatusEntry ::= SEQUENCE { mscLpTrLtRowStatus RowStatus, mscLpTrLtComponentName DisplayString, mscLpTrLtStorageType StorageType, mscLpTrLtIndex NonReplicated } mscLpTrLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLt components. These components cannot be added nor deleted." ::= { mscLpTrLtRowStatusEntry 1 } mscLpTrLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtRowStatusEntry 2 } mscLpTrLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLt tables." ::= { mscLpTrLtRowStatusEntry 4 } mscLpTrLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLt tables." ::= { mscLpTrLtRowStatusEntry 10 } mscLpTrLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLt 20 } mscLpTrLtTopEntry OBJECT-TYPE SYNTAX MscLpTrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex } ::= { mscLpTrLtTopTable 1 } MscLpTrLtTopEntry ::= SEQUENCE { mscLpTrLtTData AsciiString } mscLpTrLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. mscLpTrLtFrmCmp OBJECT IDENTIFIER ::= { mscLpTrLt 2 } mscLpTrLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFrmCmp components." ::= { mscLpTrLtFrmCmp 1 } mscLpTrLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFrmCmp component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFrmCmpIndex } ::= { mscLpTrLtFrmCmpRowStatusTable 1 } MscLpTrLtFrmCmpRowStatusEntry ::= SEQUENCE { mscLpTrLtFrmCmpRowStatus RowStatus, mscLpTrLtFrmCmpComponentName DisplayString, mscLpTrLtFrmCmpStorageType StorageType, mscLpTrLtFrmCmpIndex NonReplicated } mscLpTrLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFrmCmp components. These components cannot be added nor deleted." ::= { mscLpTrLtFrmCmpRowStatusEntry 1 } mscLpTrLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFrmCmpRowStatusEntry 2 } mscLpTrLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFrmCmp tables." ::= { mscLpTrLtFrmCmpRowStatusEntry 4 } mscLpTrLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFrmCmp tables." ::= { mscLpTrLtFrmCmpRowStatusEntry 10 } mscLpTrLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFrmCmp 10 } mscLpTrLtFrmCmpTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFrmCmpTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFrmCmpIndex } ::= { mscLpTrLtFrmCmpTopTable 1 } MscLpTrLtFrmCmpTopEntry ::= SEQUENCE { mscLpTrLtFrmCmpTData AsciiString } mscLpTrLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. mscLpTrLtFrmCpy OBJECT IDENTIFIER ::= { mscLpTrLt 3 } mscLpTrLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFrmCpy components." ::= { mscLpTrLtFrmCpy 1 } mscLpTrLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFrmCpy component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFrmCpyIndex } ::= { mscLpTrLtFrmCpyRowStatusTable 1 } MscLpTrLtFrmCpyRowStatusEntry ::= SEQUENCE { mscLpTrLtFrmCpyRowStatus RowStatus, mscLpTrLtFrmCpyComponentName DisplayString, mscLpTrLtFrmCpyStorageType StorageType, mscLpTrLtFrmCpyIndex NonReplicated } mscLpTrLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFrmCpy components. These components cannot be added nor deleted." ::= { mscLpTrLtFrmCpyRowStatusEntry 1 } mscLpTrLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFrmCpyRowStatusEntry 2 } mscLpTrLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFrmCpy tables." ::= { mscLpTrLtFrmCpyRowStatusEntry 4 } mscLpTrLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFrmCpy tables." ::= { mscLpTrLtFrmCpyRowStatusEntry 10 } mscLpTrLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFrmCpy 10 } mscLpTrLtFrmCpyTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFrmCpyTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFrmCpyIndex } ::= { mscLpTrLtFrmCpyTopTable 1 } MscLpTrLtFrmCpyTopEntry ::= SEQUENCE { mscLpTrLtFrmCpyTData AsciiString } mscLpTrLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. mscLpTrLtPrtCfg OBJECT IDENTIFIER ::= { mscLpTrLt 4 } mscLpTrLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtPrtCfg components." ::= { mscLpTrLtPrtCfg 1 } mscLpTrLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtPrtCfg component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtPrtCfgIndex } ::= { mscLpTrLtPrtCfgRowStatusTable 1 } MscLpTrLtPrtCfgRowStatusEntry ::= SEQUENCE { mscLpTrLtPrtCfgRowStatus RowStatus, mscLpTrLtPrtCfgComponentName DisplayString, mscLpTrLtPrtCfgStorageType StorageType, mscLpTrLtPrtCfgIndex NonReplicated } mscLpTrLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtPrtCfg components. These components cannot be added nor deleted." ::= { mscLpTrLtPrtCfgRowStatusEntry 1 } mscLpTrLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtPrtCfgRowStatusEntry 2 } mscLpTrLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtPrtCfg tables." ::= { mscLpTrLtPrtCfgRowStatusEntry 4 } mscLpTrLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtPrtCfg tables." ::= { mscLpTrLtPrtCfgRowStatusEntry 10 } mscLpTrLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtPrtCfg 10 } mscLpTrLtPrtCfgTopEntry OBJECT-TYPE SYNTAX MscLpTrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtPrtCfgTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtPrtCfgIndex } ::= { mscLpTrLtPrtCfgTopTable 1 } MscLpTrLtPrtCfgTopEntry ::= SEQUENCE { mscLpTrLtPrtCfgTData AsciiString } mscLpTrLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. mscLpTrLtFb OBJECT IDENTIFIER ::= { mscLpTrLt 5 } mscLpTrLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFb components." ::= { mscLpTrLtFb 1 } mscLpTrLtFbRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFb component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex } ::= { mscLpTrLtFbRowStatusTable 1 } MscLpTrLtFbRowStatusEntry ::= SEQUENCE { mscLpTrLtFbRowStatus RowStatus, mscLpTrLtFbComponentName DisplayString, mscLpTrLtFbStorageType StorageType, mscLpTrLtFbIndex NonReplicated } mscLpTrLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFb components. These components cannot be added nor deleted." ::= { mscLpTrLtFbRowStatusEntry 1 } mscLpTrLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbRowStatusEntry 2 } mscLpTrLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFb tables." ::= { mscLpTrLtFbRowStatusEntry 4 } mscLpTrLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFb tables." ::= { mscLpTrLtFbRowStatusEntry 10 } mscLpTrLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFb 20 } mscLpTrLtFbTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex } ::= { mscLpTrLtFbTopTable 1 } MscLpTrLtFbTopEntry ::= SEQUENCE { mscLpTrLtFbTData AsciiString } mscLpTrLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. mscLpTrLtFbTxInfo OBJECT IDENTIFIER ::= { mscLpTrLtFb 2 } mscLpTrLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbTxInfo components." ::= { mscLpTrLtFbTxInfo 1 } mscLpTrLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbTxInfo component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbTxInfoIndex } ::= { mscLpTrLtFbTxInfoRowStatusTable 1 } MscLpTrLtFbTxInfoRowStatusEntry ::= SEQUENCE { mscLpTrLtFbTxInfoRowStatus RowStatus, mscLpTrLtFbTxInfoComponentName DisplayString, mscLpTrLtFbTxInfoStorageType StorageType, mscLpTrLtFbTxInfoIndex NonReplicated } mscLpTrLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbTxInfo components. These components cannot be added nor deleted." ::= { mscLpTrLtFbTxInfoRowStatusEntry 1 } mscLpTrLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbTxInfoRowStatusEntry 2 } mscLpTrLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbTxInfo tables." ::= { mscLpTrLtFbTxInfoRowStatusEntry 4 } mscLpTrLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbTxInfo tables." ::= { mscLpTrLtFbTxInfoRowStatusEntry 10 } mscLpTrLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbTxInfo 10 } mscLpTrLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbTxInfoTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbTxInfoIndex } ::= { mscLpTrLtFbTxInfoTopTable 1 } MscLpTrLtFbTxInfoTopEntry ::= SEQUENCE { mscLpTrLtFbTxInfoTData AsciiString } mscLpTrLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. mscLpTrLtFbFddiMac OBJECT IDENTIFIER ::= { mscLpTrLtFb 3 } mscLpTrLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbFddiMac components." ::= { mscLpTrLtFbFddiMac 1 } mscLpTrLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbFddiMac component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbFddiMacIndex } ::= { mscLpTrLtFbFddiMacRowStatusTable 1 } MscLpTrLtFbFddiMacRowStatusEntry ::= SEQUENCE { mscLpTrLtFbFddiMacRowStatus RowStatus, mscLpTrLtFbFddiMacComponentName DisplayString, mscLpTrLtFbFddiMacStorageType StorageType, mscLpTrLtFbFddiMacIndex NonReplicated } mscLpTrLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbFddiMac components. These components cannot be added nor deleted." ::= { mscLpTrLtFbFddiMacRowStatusEntry 1 } mscLpTrLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbFddiMacRowStatusEntry 2 } mscLpTrLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbFddiMac tables." ::= { mscLpTrLtFbFddiMacRowStatusEntry 4 } mscLpTrLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbFddiMac tables." ::= { mscLpTrLtFbFddiMacRowStatusEntry 10 } mscLpTrLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbFddiMac 10 } mscLpTrLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbFddiMacTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbFddiMacIndex } ::= { mscLpTrLtFbFddiMacTopTable 1 } MscLpTrLtFbFddiMacTopEntry ::= SEQUENCE { mscLpTrLtFbFddiMacTData AsciiString } mscLpTrLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. mscLpTrLtFbMacEnet OBJECT IDENTIFIER ::= { mscLpTrLtFb 4 } mscLpTrLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbMacEnet components." ::= { mscLpTrLtFbMacEnet 1 } mscLpTrLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbMacEnet component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbMacEnetIndex } ::= { mscLpTrLtFbMacEnetRowStatusTable 1 } MscLpTrLtFbMacEnetRowStatusEntry ::= SEQUENCE { mscLpTrLtFbMacEnetRowStatus RowStatus, mscLpTrLtFbMacEnetComponentName DisplayString, mscLpTrLtFbMacEnetStorageType StorageType, mscLpTrLtFbMacEnetIndex NonReplicated } mscLpTrLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbMacEnet components. These components cannot be added nor deleted." ::= { mscLpTrLtFbMacEnetRowStatusEntry 1 } mscLpTrLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbMacEnetRowStatusEntry 2 } mscLpTrLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbMacEnet tables." ::= { mscLpTrLtFbMacEnetRowStatusEntry 4 } mscLpTrLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbMacEnet tables." ::= { mscLpTrLtFbMacEnetRowStatusEntry 10 } mscLpTrLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbMacEnet 10 } mscLpTrLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbMacEnetTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbMacEnetIndex } ::= { mscLpTrLtFbMacEnetTopTable 1 } MscLpTrLtFbMacEnetTopEntry ::= SEQUENCE { mscLpTrLtFbMacEnetTData AsciiString } mscLpTrLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. mscLpTrLtFbMacTr OBJECT IDENTIFIER ::= { mscLpTrLtFb 5 } mscLpTrLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbMacTr components." ::= { mscLpTrLtFbMacTr 1 } mscLpTrLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbMacTr component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbMacTrIndex } ::= { mscLpTrLtFbMacTrRowStatusTable 1 } MscLpTrLtFbMacTrRowStatusEntry ::= SEQUENCE { mscLpTrLtFbMacTrRowStatus RowStatus, mscLpTrLtFbMacTrComponentName DisplayString, mscLpTrLtFbMacTrStorageType StorageType, mscLpTrLtFbMacTrIndex NonReplicated } mscLpTrLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbMacTr components. These components cannot be added nor deleted." ::= { mscLpTrLtFbMacTrRowStatusEntry 1 } mscLpTrLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbMacTrRowStatusEntry 2 } mscLpTrLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbMacTr tables." ::= { mscLpTrLtFbMacTrRowStatusEntry 4 } mscLpTrLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbMacTr tables." ::= { mscLpTrLtFbMacTrRowStatusEntry 10 } mscLpTrLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbMacTr 10 } mscLpTrLtFbMacTrTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbMacTrTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbMacTrIndex } ::= { mscLpTrLtFbMacTrTopTable 1 } MscLpTrLtFbMacTrTopEntry ::= SEQUENCE { mscLpTrLtFbMacTrTData AsciiString } mscLpTrLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. mscLpTrLtFbData OBJECT IDENTIFIER ::= { mscLpTrLtFb 6 } mscLpTrLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbData components." ::= { mscLpTrLtFbData 1 } mscLpTrLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbData component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbDataIndex } ::= { mscLpTrLtFbDataRowStatusTable 1 } MscLpTrLtFbDataRowStatusEntry ::= SEQUENCE { mscLpTrLtFbDataRowStatus RowStatus, mscLpTrLtFbDataComponentName DisplayString, mscLpTrLtFbDataStorageType StorageType, mscLpTrLtFbDataIndex NonReplicated } mscLpTrLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbData components. These components cannot be added nor deleted." ::= { mscLpTrLtFbDataRowStatusEntry 1 } mscLpTrLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbDataRowStatusEntry 2 } mscLpTrLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbData tables." ::= { mscLpTrLtFbDataRowStatusEntry 4 } mscLpTrLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbData tables." ::= { mscLpTrLtFbDataRowStatusEntry 10 } mscLpTrLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbData 10 } mscLpTrLtFbDataTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbDataTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbDataIndex } ::= { mscLpTrLtFbDataTopTable 1 } MscLpTrLtFbDataTopEntry ::= SEQUENCE { mscLpTrLtFbDataTData AsciiString } mscLpTrLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. mscLpTrLtFbIpH OBJECT IDENTIFIER ::= { mscLpTrLtFb 7 } mscLpTrLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbIpH components." ::= { mscLpTrLtFbIpH 1 } mscLpTrLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbIpH component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbIpHIndex } ::= { mscLpTrLtFbIpHRowStatusTable 1 } MscLpTrLtFbIpHRowStatusEntry ::= SEQUENCE { mscLpTrLtFbIpHRowStatus RowStatus, mscLpTrLtFbIpHComponentName DisplayString, mscLpTrLtFbIpHStorageType StorageType, mscLpTrLtFbIpHIndex NonReplicated } mscLpTrLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbIpH components. These components cannot be added nor deleted." ::= { mscLpTrLtFbIpHRowStatusEntry 1 } mscLpTrLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbIpHRowStatusEntry 2 } mscLpTrLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbIpH tables." ::= { mscLpTrLtFbIpHRowStatusEntry 4 } mscLpTrLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbIpH tables." ::= { mscLpTrLtFbIpHRowStatusEntry 10 } mscLpTrLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbIpH 10 } mscLpTrLtFbIpHTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbIpHTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbIpHIndex } ::= { mscLpTrLtFbIpHTopTable 1 } MscLpTrLtFbIpHTopEntry ::= SEQUENCE { mscLpTrLtFbIpHTData AsciiString } mscLpTrLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. mscLpTrLtFbLlch OBJECT IDENTIFIER ::= { mscLpTrLtFb 8 } mscLpTrLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbLlch components." ::= { mscLpTrLtFbLlch 1 } mscLpTrLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbLlch component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbLlchIndex } ::= { mscLpTrLtFbLlchRowStatusTable 1 } MscLpTrLtFbLlchRowStatusEntry ::= SEQUENCE { mscLpTrLtFbLlchRowStatus RowStatus, mscLpTrLtFbLlchComponentName DisplayString, mscLpTrLtFbLlchStorageType StorageType, mscLpTrLtFbLlchIndex NonReplicated } mscLpTrLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbLlch components. These components cannot be added nor deleted." ::= { mscLpTrLtFbLlchRowStatusEntry 1 } mscLpTrLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbLlchRowStatusEntry 2 } mscLpTrLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbLlch tables." ::= { mscLpTrLtFbLlchRowStatusEntry 4 } mscLpTrLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbLlch tables." ::= { mscLpTrLtFbLlchRowStatusEntry 10 } mscLpTrLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbLlch 10 } mscLpTrLtFbLlchTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbLlchTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbLlchIndex } ::= { mscLpTrLtFbLlchTopTable 1 } MscLpTrLtFbLlchTopEntry ::= SEQUENCE { mscLpTrLtFbLlchTData AsciiString } mscLpTrLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. mscLpTrLtFbAppleH OBJECT IDENTIFIER ::= { mscLpTrLtFb 9 } mscLpTrLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbAppleH components." ::= { mscLpTrLtFbAppleH 1 } mscLpTrLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbAppleH component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbAppleHIndex } ::= { mscLpTrLtFbAppleHRowStatusTable 1 } MscLpTrLtFbAppleHRowStatusEntry ::= SEQUENCE { mscLpTrLtFbAppleHRowStatus RowStatus, mscLpTrLtFbAppleHComponentName DisplayString, mscLpTrLtFbAppleHStorageType StorageType, mscLpTrLtFbAppleHIndex NonReplicated } mscLpTrLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbAppleH components. These components cannot be added nor deleted." ::= { mscLpTrLtFbAppleHRowStatusEntry 1 } mscLpTrLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbAppleHRowStatusEntry 2 } mscLpTrLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbAppleH tables." ::= { mscLpTrLtFbAppleHRowStatusEntry 4 } mscLpTrLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbAppleH tables." ::= { mscLpTrLtFbAppleHRowStatusEntry 10 } mscLpTrLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbAppleH 10 } mscLpTrLtFbAppleHTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbAppleHTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbAppleHIndex } ::= { mscLpTrLtFbAppleHTopTable 1 } MscLpTrLtFbAppleHTopEntry ::= SEQUENCE { mscLpTrLtFbAppleHTData AsciiString } mscLpTrLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. mscLpTrLtFbIpxH OBJECT IDENTIFIER ::= { mscLpTrLtFb 10 } mscLpTrLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtFbIpxH components." ::= { mscLpTrLtFbIpxH 1 } mscLpTrLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtFbIpxH component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbIpxHIndex } ::= { mscLpTrLtFbIpxHRowStatusTable 1 } MscLpTrLtFbIpxHRowStatusEntry ::= SEQUENCE { mscLpTrLtFbIpxHRowStatus RowStatus, mscLpTrLtFbIpxHComponentName DisplayString, mscLpTrLtFbIpxHStorageType StorageType, mscLpTrLtFbIpxHIndex NonReplicated } mscLpTrLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtFbIpxH components. These components cannot be added nor deleted." ::= { mscLpTrLtFbIpxHRowStatusEntry 1 } mscLpTrLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtFbIpxHRowStatusEntry 2 } mscLpTrLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtFbIpxH tables." ::= { mscLpTrLtFbIpxHRowStatusEntry 4 } mscLpTrLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtFbIpxH tables." ::= { mscLpTrLtFbIpxHRowStatusEntry 10 } mscLpTrLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtFbIpxH 10 } mscLpTrLtFbIpxHTopEntry OBJECT-TYPE SYNTAX MscLpTrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtFbIpxHTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtFbIndex, mscLpTrLtFbIpxHIndex } ::= { mscLpTrLtFbIpxHTopTable 1 } MscLpTrLtFbIpxHTopEntry ::= SEQUENCE { mscLpTrLtFbIpxHTData AsciiString } mscLpTrLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. mscLpTrLtCntl OBJECT IDENTIFIER ::= { mscLpTrLt 6 } mscLpTrLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrLtCntl components." ::= { mscLpTrLtCntl 1 } mscLpTrLtCntlRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrLtCntl component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtCntlIndex } ::= { mscLpTrLtCntlRowStatusTable 1 } MscLpTrLtCntlRowStatusEntry ::= SEQUENCE { mscLpTrLtCntlRowStatus RowStatus, mscLpTrLtCntlComponentName DisplayString, mscLpTrLtCntlStorageType StorageType, mscLpTrLtCntlIndex NonReplicated } mscLpTrLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrLtCntl components. These components cannot be added nor deleted." ::= { mscLpTrLtCntlRowStatusEntry 1 } mscLpTrLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrLtCntlRowStatusEntry 2 } mscLpTrLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrLtCntl tables." ::= { mscLpTrLtCntlRowStatusEntry 4 } mscLpTrLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrLtCntl tables." ::= { mscLpTrLtCntlRowStatusEntry 10 } mscLpTrLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpTrLtCntl 10 } mscLpTrLtCntlTopEntry OBJECT-TYPE SYNTAX MscLpTrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrLtCntlTopTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrLtIndex, mscLpTrLtCntlIndex } ::= { mscLpTrLtCntlTopTable 1 } MscLpTrLtCntlTopEntry ::= SEQUENCE { mscLpTrLtCntlTData AsciiString } mscLpTrLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpTrLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. mscLpTrTest OBJECT IDENTIFIER ::= { mscLpTr 5 } mscLpTrTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpTrTest components." ::= { mscLpTrTest 1 } mscLpTrTestRowStatusEntry OBJECT-TYPE SYNTAX MscLpTrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpTrTest component." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrTestIndex } ::= { mscLpTrTestRowStatusTable 1 } MscLpTrTestRowStatusEntry ::= SEQUENCE { mscLpTrTestRowStatus RowStatus, mscLpTrTestComponentName DisplayString, mscLpTrTestStorageType StorageType, mscLpTrTestIndex NonReplicated } mscLpTrTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpTrTest components. These components cannot be added nor deleted." ::= { mscLpTrTestRowStatusEntry 1 } mscLpTrTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpTrTestRowStatusEntry 2 } mscLpTrTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpTrTest tables." ::= { mscLpTrTestRowStatusEntry 4 } mscLpTrTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpTrTest tables." ::= { mscLpTrTestRowStatusEntry 10 } mscLpTrTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { mscLpTrTest 10 } mscLpTrTestPTOEntry OBJECT-TYPE SYNTAX MscLpTrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrTestPTOTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrTestIndex } ::= { mscLpTrTestPTOTable 1 } MscLpTrTestPTOEntry ::= SEQUENCE { mscLpTrTestType INTEGER, mscLpTrTestFrmSize Unsigned32, mscLpTrTestDuration Unsigned32 } mscLpTrTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { mscLpTrTestPTOEntry 1 } mscLpTrTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { mscLpTrTestPTOEntry 2 } mscLpTrTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { mscLpTrTestPTOEntry 3 } mscLpTrTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpTrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { mscLpTrTest 11 } mscLpTrTestResultsEntry OBJECT-TYPE SYNTAX MscLpTrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpTrTestResultsTable." INDEX { mscLpIndex, mscLpTrIndex, mscLpTrTestIndex } ::= { mscLpTrTestResultsTable 1 } MscLpTrTestResultsEntry ::= SEQUENCE { mscLpTrTestElapsedTime Counter32, mscLpTrTestTimeRemaining Unsigned32, mscLpTrTestCauseOfTermination INTEGER, mscLpTrTestFrmTx PassportCounter64, mscLpTrTestBitsTx PassportCounter64, mscLpTrTestFrmRx PassportCounter64, mscLpTrTestBitsRx PassportCounter64, mscLpTrTestErroredFrmRx PassportCounter64 } mscLpTrTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { mscLpTrTestResultsEntry 4 } mscLpTrTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { mscLpTrTestResultsEntry 5 } mscLpTrTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { mscLpTrTestResultsEntry 6 } mscLpTrTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpTrTestResultsEntry 7 } mscLpTrTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpTrTestResultsEntry 8 } mscLpTrTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpTrTestResultsEntry 9 } mscLpTrTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpTrTestResultsEntry 10 } mscLpTrTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpTrTestResultsEntry 11 } -- Lp/n IlsForwarder/0 -- This component defines an instance of a IlsForwarder. At least one -- instance of this component must be provisioned if there is any AtmMpe -- component provisioned. mscLpIlsFwdr OBJECT IDENTIFIER ::= { mscLp 21 } mscLpIlsFwdrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdr components." ::= { mscLpIlsFwdr 1 } mscLpIlsFwdrRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdr component." INDEX { mscLpIndex, mscLpIlsFwdrIndex } ::= { mscLpIlsFwdrRowStatusTable 1 } MscLpIlsFwdrRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrRowStatus RowStatus, mscLpIlsFwdrComponentName DisplayString, mscLpIlsFwdrStorageType StorageType, mscLpIlsFwdrIndex Integer32 } mscLpIlsFwdrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdr components. These components can be added and deleted." ::= { mscLpIlsFwdrRowStatusEntry 1 } mscLpIlsFwdrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrRowStatusEntry 2 } mscLpIlsFwdrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdr tables." ::= { mscLpIlsFwdrRowStatusEntry 4 } mscLpIlsFwdrIndex OBJECT-TYPE SYNTAX Integer32 (0) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdr tables." ::= { mscLpIlsFwdrRowStatusEntry 10 } mscLpIlsFwdrIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLpIlsFwdr 11 } mscLpIlsFwdrIfEntryEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrIfEntryTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex } ::= { mscLpIlsFwdrIfEntryTable 1 } MscLpIlsFwdrIfEntryEntry ::= SEQUENCE { mscLpIlsFwdrIfAdminStatus INTEGER, mscLpIlsFwdrIfIndex InterfaceIndex } mscLpIlsFwdrIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpIlsFwdrIfEntryEntry 1 } mscLpIlsFwdrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLpIlsFwdrIfEntryEntry 2 } mscLpIlsFwdrStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLpIlsFwdr 12 } mscLpIlsFwdrStateEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrStateTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex } ::= { mscLpIlsFwdrStateTable 1 } MscLpIlsFwdrStateEntry ::= SEQUENCE { mscLpIlsFwdrAdminState INTEGER, mscLpIlsFwdrOperationalState INTEGER, mscLpIlsFwdrUsageState INTEGER } mscLpIlsFwdrAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLpIlsFwdrStateEntry 1 } mscLpIlsFwdrOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLpIlsFwdrStateEntry 2 } mscLpIlsFwdrUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLpIlsFwdrStateEntry 3 } mscLpIlsFwdrOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLpIlsFwdr 13 } mscLpIlsFwdrOperStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrOperStatusTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex } ::= { mscLpIlsFwdrOperStatusTable 1 } MscLpIlsFwdrOperStatusEntry ::= SEQUENCE { mscLpIlsFwdrSnmpOperStatus INTEGER } mscLpIlsFwdrSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpIlsFwdrOperStatusEntry 1 } mscLpIlsFwdrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational frame statistics related attributes of the IlsForwarder component." ::= { mscLpIlsFwdr 14 } mscLpIlsFwdrStatsEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrStatsTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex } ::= { mscLpIlsFwdrStatsTable 1 } MscLpIlsFwdrStatsEntry ::= SEQUENCE { mscLpIlsFwdrFramesReceived PassportCounter64, mscLpIlsFwdrProcessedCount PassportCounter64, mscLpIlsFwdrErrorCount PassportCounter64, mscLpIlsFwdrFramesDiscarded PassportCounter64 } mscLpIlsFwdrFramesReceived OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that have been received by this card. This counter will wrap around after it reaches its maximum value." ::= { mscLpIlsFwdrStatsEntry 1 } mscLpIlsFwdrProcessedCount OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames successfully processed by this card. This counter will wrap around after it reaches its maximum value." ::= { mscLpIlsFwdrStatsEntry 2 } mscLpIlsFwdrErrorCount OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of internal errors detected in transferring frames from an ATM card to this card. A continuous increment of this count indicates that the hardware may probably be defective. This counter will wrap around after it reaches its maximum value." ::= { mscLpIlsFwdrStatsEntry 3 } mscLpIlsFwdrFramesDiscarded OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which are discarded due to local buffer congestion. This counter will wrap around after it reaches its maximum value." ::= { mscLpIlsFwdrStatsEntry 4 } mscLpIlsFwdrLinkToTrafficSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLinkToTrafficSourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute contains a list of components that are using this IlsForwarder." ::= { mscLpIlsFwdr 312 } mscLpIlsFwdrLinkToTrafficSourceEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLinkToTrafficSourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLinkToTrafficSourceTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLinkToTrafficSourceValue } ::= { mscLpIlsFwdrLinkToTrafficSourceTable 1 } MscLpIlsFwdrLinkToTrafficSourceEntry ::= SEQUENCE { mscLpIlsFwdrLinkToTrafficSourceValue Link } mscLpIlsFwdrLinkToTrafficSourceValue OBJECT-TYPE SYNTAX Link ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mscLpIlsFwdrLinkToTrafficSourceTable." ::= { mscLpIlsFwdrLinkToTrafficSourceEntry 1 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. mscLpIlsFwdrLt OBJECT IDENTIFIER ::= { mscLpIlsFwdr 2 } mscLpIlsFwdrLtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLt components." ::= { mscLpIlsFwdrLt 1 } mscLpIlsFwdrLtRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLt component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex } ::= { mscLpIlsFwdrLtRowStatusTable 1 } MscLpIlsFwdrLtRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtRowStatus RowStatus, mscLpIlsFwdrLtComponentName DisplayString, mscLpIlsFwdrLtStorageType StorageType, mscLpIlsFwdrLtIndex NonReplicated } mscLpIlsFwdrLtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLt components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtRowStatusEntry 1 } mscLpIlsFwdrLtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtRowStatusEntry 2 } mscLpIlsFwdrLtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLt tables." ::= { mscLpIlsFwdrLtRowStatusEntry 4 } mscLpIlsFwdrLtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLt tables." ::= { mscLpIlsFwdrLtRowStatusEntry 10 } mscLpIlsFwdrLtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLt 20 } mscLpIlsFwdrLtTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex } ::= { mscLpIlsFwdrLtTopTable 1 } MscLpIlsFwdrLtTopEntry ::= SEQUENCE { mscLpIlsFwdrLtTData AsciiString } mscLpIlsFwdrLtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. mscLpIlsFwdrLtFrmCmp OBJECT IDENTIFIER ::= { mscLpIlsFwdrLt 2 } mscLpIlsFwdrLtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFrmCmp components." ::= { mscLpIlsFwdrLtFrmCmp 1 } mscLpIlsFwdrLtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFrmCmp component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFrmCmpIndex } ::= { mscLpIlsFwdrLtFrmCmpRowStatusTable 1 } MscLpIlsFwdrLtFrmCmpRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFrmCmpRowStatus RowStatus, mscLpIlsFwdrLtFrmCmpComponentName DisplayString, mscLpIlsFwdrLtFrmCmpStorageType StorageType, mscLpIlsFwdrLtFrmCmpIndex NonReplicated } mscLpIlsFwdrLtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFrmCmp components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFrmCmpRowStatusEntry 1 } mscLpIlsFwdrLtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFrmCmpRowStatusEntry 2 } mscLpIlsFwdrLtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFrmCmp tables." ::= { mscLpIlsFwdrLtFrmCmpRowStatusEntry 4 } mscLpIlsFwdrLtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFrmCmp tables." ::= { mscLpIlsFwdrLtFrmCmpRowStatusEntry 10 } mscLpIlsFwdrLtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFrmCmp 10 } mscLpIlsFwdrLtFrmCmpTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFrmCmpTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFrmCmpIndex } ::= { mscLpIlsFwdrLtFrmCmpTopTable 1 } MscLpIlsFwdrLtFrmCmpTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFrmCmpTData AsciiString } mscLpIlsFwdrLtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. mscLpIlsFwdrLtFrmCpy OBJECT IDENTIFIER ::= { mscLpIlsFwdrLt 3 } mscLpIlsFwdrLtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFrmCpy components." ::= { mscLpIlsFwdrLtFrmCpy 1 } mscLpIlsFwdrLtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFrmCpy component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFrmCpyIndex } ::= { mscLpIlsFwdrLtFrmCpyRowStatusTable 1 } MscLpIlsFwdrLtFrmCpyRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFrmCpyRowStatus RowStatus, mscLpIlsFwdrLtFrmCpyComponentName DisplayString, mscLpIlsFwdrLtFrmCpyStorageType StorageType, mscLpIlsFwdrLtFrmCpyIndex NonReplicated } mscLpIlsFwdrLtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFrmCpy components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFrmCpyRowStatusEntry 1 } mscLpIlsFwdrLtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFrmCpyRowStatusEntry 2 } mscLpIlsFwdrLtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFrmCpy tables." ::= { mscLpIlsFwdrLtFrmCpyRowStatusEntry 4 } mscLpIlsFwdrLtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFrmCpy tables." ::= { mscLpIlsFwdrLtFrmCpyRowStatusEntry 10 } mscLpIlsFwdrLtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFrmCpy 10 } mscLpIlsFwdrLtFrmCpyTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFrmCpyTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFrmCpyIndex } ::= { mscLpIlsFwdrLtFrmCpyTopTable 1 } MscLpIlsFwdrLtFrmCpyTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFrmCpyTData AsciiString } mscLpIlsFwdrLtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. mscLpIlsFwdrLtPrtCfg OBJECT IDENTIFIER ::= { mscLpIlsFwdrLt 4 } mscLpIlsFwdrLtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtPrtCfg components." ::= { mscLpIlsFwdrLtPrtCfg 1 } mscLpIlsFwdrLtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtPrtCfg component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtPrtCfgIndex } ::= { mscLpIlsFwdrLtPrtCfgRowStatusTable 1 } MscLpIlsFwdrLtPrtCfgRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtPrtCfgRowStatus RowStatus, mscLpIlsFwdrLtPrtCfgComponentName DisplayString, mscLpIlsFwdrLtPrtCfgStorageType StorageType, mscLpIlsFwdrLtPrtCfgIndex NonReplicated } mscLpIlsFwdrLtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtPrtCfg components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtPrtCfgRowStatusEntry 1 } mscLpIlsFwdrLtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtPrtCfgRowStatusEntry 2 } mscLpIlsFwdrLtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtPrtCfg tables." ::= { mscLpIlsFwdrLtPrtCfgRowStatusEntry 4 } mscLpIlsFwdrLtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtPrtCfg tables." ::= { mscLpIlsFwdrLtPrtCfgRowStatusEntry 10 } mscLpIlsFwdrLtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtPrtCfg 10 } mscLpIlsFwdrLtPrtCfgTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtPrtCfgTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtPrtCfgIndex } ::= { mscLpIlsFwdrLtPrtCfgTopTable 1 } MscLpIlsFwdrLtPrtCfgTopEntry ::= SEQUENCE { mscLpIlsFwdrLtPrtCfgTData AsciiString } mscLpIlsFwdrLtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. mscLpIlsFwdrLtFb OBJECT IDENTIFIER ::= { mscLpIlsFwdrLt 5 } mscLpIlsFwdrLtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFb components." ::= { mscLpIlsFwdrLtFb 1 } mscLpIlsFwdrLtFbRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFb component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex } ::= { mscLpIlsFwdrLtFbRowStatusTable 1 } MscLpIlsFwdrLtFbRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbRowStatus RowStatus, mscLpIlsFwdrLtFbComponentName DisplayString, mscLpIlsFwdrLtFbStorageType StorageType, mscLpIlsFwdrLtFbIndex NonReplicated } mscLpIlsFwdrLtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFb components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbRowStatusEntry 1 } mscLpIlsFwdrLtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbRowStatusEntry 2 } mscLpIlsFwdrLtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFb tables." ::= { mscLpIlsFwdrLtFbRowStatusEntry 4 } mscLpIlsFwdrLtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFb tables." ::= { mscLpIlsFwdrLtFbRowStatusEntry 10 } mscLpIlsFwdrLtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFb 20 } mscLpIlsFwdrLtFbTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex } ::= { mscLpIlsFwdrLtFbTopTable 1 } MscLpIlsFwdrLtFbTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbTData AsciiString } mscLpIlsFwdrLtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. mscLpIlsFwdrLtFbTxInfo OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 2 } mscLpIlsFwdrLtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbTxInfo components." ::= { mscLpIlsFwdrLtFbTxInfo 1 } mscLpIlsFwdrLtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbTxInfo component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbTxInfoIndex } ::= { mscLpIlsFwdrLtFbTxInfoRowStatusTable 1 } MscLpIlsFwdrLtFbTxInfoRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbTxInfoRowStatus RowStatus, mscLpIlsFwdrLtFbTxInfoComponentName DisplayString, mscLpIlsFwdrLtFbTxInfoStorageType StorageType, mscLpIlsFwdrLtFbTxInfoIndex NonReplicated } mscLpIlsFwdrLtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbTxInfo components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbTxInfoRowStatusEntry 1 } mscLpIlsFwdrLtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbTxInfoRowStatusEntry 2 } mscLpIlsFwdrLtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbTxInfo tables." ::= { mscLpIlsFwdrLtFbTxInfoRowStatusEntry 4 } mscLpIlsFwdrLtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbTxInfo tables." ::= { mscLpIlsFwdrLtFbTxInfoRowStatusEntry 10 } mscLpIlsFwdrLtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbTxInfo 10 } mscLpIlsFwdrLtFbTxInfoTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbTxInfoTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbTxInfoIndex } ::= { mscLpIlsFwdrLtFbTxInfoTopTable 1 } MscLpIlsFwdrLtFbTxInfoTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbTxInfoTData AsciiString } mscLpIlsFwdrLtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. mscLpIlsFwdrLtFbFddiMac OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 3 } mscLpIlsFwdrLtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbFddiMac components." ::= { mscLpIlsFwdrLtFbFddiMac 1 } mscLpIlsFwdrLtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbFddiMac component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbFddiMacIndex } ::= { mscLpIlsFwdrLtFbFddiMacRowStatusTable 1 } MscLpIlsFwdrLtFbFddiMacRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbFddiMacRowStatus RowStatus, mscLpIlsFwdrLtFbFddiMacComponentName DisplayString, mscLpIlsFwdrLtFbFddiMacStorageType StorageType, mscLpIlsFwdrLtFbFddiMacIndex NonReplicated } mscLpIlsFwdrLtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbFddiMac components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbFddiMacRowStatusEntry 1 } mscLpIlsFwdrLtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbFddiMacRowStatusEntry 2 } mscLpIlsFwdrLtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbFddiMac tables." ::= { mscLpIlsFwdrLtFbFddiMacRowStatusEntry 4 } mscLpIlsFwdrLtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbFddiMac tables." ::= { mscLpIlsFwdrLtFbFddiMacRowStatusEntry 10 } mscLpIlsFwdrLtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbFddiMac 10 } mscLpIlsFwdrLtFbFddiMacTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbFddiMacTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbFddiMacIndex } ::= { mscLpIlsFwdrLtFbFddiMacTopTable 1 } MscLpIlsFwdrLtFbFddiMacTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbFddiMacTData AsciiString } mscLpIlsFwdrLtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. mscLpIlsFwdrLtFbMacEnet OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 4 } mscLpIlsFwdrLtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbMacEnet components." ::= { mscLpIlsFwdrLtFbMacEnet 1 } mscLpIlsFwdrLtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbMacEnet component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbMacEnetIndex } ::= { mscLpIlsFwdrLtFbMacEnetRowStatusTable 1 } MscLpIlsFwdrLtFbMacEnetRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbMacEnetRowStatus RowStatus, mscLpIlsFwdrLtFbMacEnetComponentName DisplayString, mscLpIlsFwdrLtFbMacEnetStorageType StorageType, mscLpIlsFwdrLtFbMacEnetIndex NonReplicated } mscLpIlsFwdrLtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbMacEnet components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbMacEnetRowStatusEntry 1 } mscLpIlsFwdrLtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbMacEnetRowStatusEntry 2 } mscLpIlsFwdrLtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbMacEnet tables." ::= { mscLpIlsFwdrLtFbMacEnetRowStatusEntry 4 } mscLpIlsFwdrLtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbMacEnet tables." ::= { mscLpIlsFwdrLtFbMacEnetRowStatusEntry 10 } mscLpIlsFwdrLtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbMacEnet 10 } mscLpIlsFwdrLtFbMacEnetTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbMacEnetTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbMacEnetIndex } ::= { mscLpIlsFwdrLtFbMacEnetTopTable 1 } MscLpIlsFwdrLtFbMacEnetTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbMacEnetTData AsciiString } mscLpIlsFwdrLtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. mscLpIlsFwdrLtFbMacTr OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 5 } mscLpIlsFwdrLtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbMacTr components." ::= { mscLpIlsFwdrLtFbMacTr 1 } mscLpIlsFwdrLtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbMacTr component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbMacTrIndex } ::= { mscLpIlsFwdrLtFbMacTrRowStatusTable 1 } MscLpIlsFwdrLtFbMacTrRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbMacTrRowStatus RowStatus, mscLpIlsFwdrLtFbMacTrComponentName DisplayString, mscLpIlsFwdrLtFbMacTrStorageType StorageType, mscLpIlsFwdrLtFbMacTrIndex NonReplicated } mscLpIlsFwdrLtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbMacTr components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbMacTrRowStatusEntry 1 } mscLpIlsFwdrLtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbMacTrRowStatusEntry 2 } mscLpIlsFwdrLtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbMacTr tables." ::= { mscLpIlsFwdrLtFbMacTrRowStatusEntry 4 } mscLpIlsFwdrLtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbMacTr tables." ::= { mscLpIlsFwdrLtFbMacTrRowStatusEntry 10 } mscLpIlsFwdrLtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbMacTr 10 } mscLpIlsFwdrLtFbMacTrTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbMacTrTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbMacTrIndex } ::= { mscLpIlsFwdrLtFbMacTrTopTable 1 } MscLpIlsFwdrLtFbMacTrTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbMacTrTData AsciiString } mscLpIlsFwdrLtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbMacTrTopEntry 1 } -- This component adds a data field to frame. mscLpIlsFwdrLtFbData OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 6 } mscLpIlsFwdrLtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbData components." ::= { mscLpIlsFwdrLtFbData 1 } mscLpIlsFwdrLtFbDataRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbData component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbDataIndex } ::= { mscLpIlsFwdrLtFbDataRowStatusTable 1 } MscLpIlsFwdrLtFbDataRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbDataRowStatus RowStatus, mscLpIlsFwdrLtFbDataComponentName DisplayString, mscLpIlsFwdrLtFbDataStorageType StorageType, mscLpIlsFwdrLtFbDataIndex NonReplicated } mscLpIlsFwdrLtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbData components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbDataRowStatusEntry 1 } mscLpIlsFwdrLtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbDataRowStatusEntry 2 } mscLpIlsFwdrLtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbData tables." ::= { mscLpIlsFwdrLtFbDataRowStatusEntry 4 } mscLpIlsFwdrLtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbData tables." ::= { mscLpIlsFwdrLtFbDataRowStatusEntry 10 } mscLpIlsFwdrLtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbData 10 } mscLpIlsFwdrLtFbDataTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbDataTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbDataIndex } ::= { mscLpIlsFwdrLtFbDataTopTable 1 } MscLpIlsFwdrLtFbDataTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbDataTData AsciiString } mscLpIlsFwdrLtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. mscLpIlsFwdrLtFbIpH OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 7 } mscLpIlsFwdrLtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbIpH components." ::= { mscLpIlsFwdrLtFbIpH 1 } mscLpIlsFwdrLtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbIpH component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbIpHIndex } ::= { mscLpIlsFwdrLtFbIpHRowStatusTable 1 } MscLpIlsFwdrLtFbIpHRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbIpHRowStatus RowStatus, mscLpIlsFwdrLtFbIpHComponentName DisplayString, mscLpIlsFwdrLtFbIpHStorageType StorageType, mscLpIlsFwdrLtFbIpHIndex NonReplicated } mscLpIlsFwdrLtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbIpH components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbIpHRowStatusEntry 1 } mscLpIlsFwdrLtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbIpHRowStatusEntry 2 } mscLpIlsFwdrLtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbIpH tables." ::= { mscLpIlsFwdrLtFbIpHRowStatusEntry 4 } mscLpIlsFwdrLtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbIpH tables." ::= { mscLpIlsFwdrLtFbIpHRowStatusEntry 10 } mscLpIlsFwdrLtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbIpH 10 } mscLpIlsFwdrLtFbIpHTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbIpHTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbIpHIndex } ::= { mscLpIlsFwdrLtFbIpHTopTable 1 } MscLpIlsFwdrLtFbIpHTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbIpHTData AsciiString } mscLpIlsFwdrLtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. mscLpIlsFwdrLtFbLlch OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 8 } mscLpIlsFwdrLtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbLlch components." ::= { mscLpIlsFwdrLtFbLlch 1 } mscLpIlsFwdrLtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbLlch component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbLlchIndex } ::= { mscLpIlsFwdrLtFbLlchRowStatusTable 1 } MscLpIlsFwdrLtFbLlchRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbLlchRowStatus RowStatus, mscLpIlsFwdrLtFbLlchComponentName DisplayString, mscLpIlsFwdrLtFbLlchStorageType StorageType, mscLpIlsFwdrLtFbLlchIndex NonReplicated } mscLpIlsFwdrLtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbLlch components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbLlchRowStatusEntry 1 } mscLpIlsFwdrLtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbLlchRowStatusEntry 2 } mscLpIlsFwdrLtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbLlch tables." ::= { mscLpIlsFwdrLtFbLlchRowStatusEntry 4 } mscLpIlsFwdrLtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbLlch tables." ::= { mscLpIlsFwdrLtFbLlchRowStatusEntry 10 } mscLpIlsFwdrLtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbLlch 10 } mscLpIlsFwdrLtFbLlchTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbLlchTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbLlchIndex } ::= { mscLpIlsFwdrLtFbLlchTopTable 1 } MscLpIlsFwdrLtFbLlchTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbLlchTData AsciiString } mscLpIlsFwdrLtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. mscLpIlsFwdrLtFbAppleH OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 9 } mscLpIlsFwdrLtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbAppleH components." ::= { mscLpIlsFwdrLtFbAppleH 1 } mscLpIlsFwdrLtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbAppleH component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbAppleHIndex } ::= { mscLpIlsFwdrLtFbAppleHRowStatusTable 1 } MscLpIlsFwdrLtFbAppleHRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbAppleHRowStatus RowStatus, mscLpIlsFwdrLtFbAppleHComponentName DisplayString, mscLpIlsFwdrLtFbAppleHStorageType StorageType, mscLpIlsFwdrLtFbAppleHIndex NonReplicated } mscLpIlsFwdrLtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbAppleH components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbAppleHRowStatusEntry 1 } mscLpIlsFwdrLtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbAppleHRowStatusEntry 2 } mscLpIlsFwdrLtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbAppleH tables." ::= { mscLpIlsFwdrLtFbAppleHRowStatusEntry 4 } mscLpIlsFwdrLtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbAppleH tables." ::= { mscLpIlsFwdrLtFbAppleHRowStatusEntry 10 } mscLpIlsFwdrLtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbAppleH 10 } mscLpIlsFwdrLtFbAppleHTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbAppleHTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbAppleHIndex } ::= { mscLpIlsFwdrLtFbAppleHTopTable 1 } MscLpIlsFwdrLtFbAppleHTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbAppleHTData AsciiString } mscLpIlsFwdrLtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. mscLpIlsFwdrLtFbIpxH OBJECT IDENTIFIER ::= { mscLpIlsFwdrLtFb 10 } mscLpIlsFwdrLtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtFbIpxH components." ::= { mscLpIlsFwdrLtFbIpxH 1 } mscLpIlsFwdrLtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtFbIpxH component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbIpxHIndex } ::= { mscLpIlsFwdrLtFbIpxHRowStatusTable 1 } MscLpIlsFwdrLtFbIpxHRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtFbIpxHRowStatus RowStatus, mscLpIlsFwdrLtFbIpxHComponentName DisplayString, mscLpIlsFwdrLtFbIpxHStorageType StorageType, mscLpIlsFwdrLtFbIpxHIndex NonReplicated } mscLpIlsFwdrLtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtFbIpxH components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtFbIpxHRowStatusEntry 1 } mscLpIlsFwdrLtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtFbIpxHRowStatusEntry 2 } mscLpIlsFwdrLtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtFbIpxH tables." ::= { mscLpIlsFwdrLtFbIpxHRowStatusEntry 4 } mscLpIlsFwdrLtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtFbIpxH tables." ::= { mscLpIlsFwdrLtFbIpxHRowStatusEntry 10 } mscLpIlsFwdrLtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtFbIpxH 10 } mscLpIlsFwdrLtFbIpxHTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtFbIpxHTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtFbIndex, mscLpIlsFwdrLtFbIpxHIndex } ::= { mscLpIlsFwdrLtFbIpxHTopTable 1 } MscLpIlsFwdrLtFbIpxHTopEntry ::= SEQUENCE { mscLpIlsFwdrLtFbIpxHTData AsciiString } mscLpIlsFwdrLtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. mscLpIlsFwdrLtCntl OBJECT IDENTIFIER ::= { mscLpIlsFwdrLt 6 } mscLpIlsFwdrLtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrLtCntl components." ::= { mscLpIlsFwdrLtCntl 1 } mscLpIlsFwdrLtCntlRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrLtCntl component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtCntlIndex } ::= { mscLpIlsFwdrLtCntlRowStatusTable 1 } MscLpIlsFwdrLtCntlRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrLtCntlRowStatus RowStatus, mscLpIlsFwdrLtCntlComponentName DisplayString, mscLpIlsFwdrLtCntlStorageType StorageType, mscLpIlsFwdrLtCntlIndex NonReplicated } mscLpIlsFwdrLtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrLtCntl components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrLtCntlRowStatusEntry 1 } mscLpIlsFwdrLtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrLtCntlRowStatusEntry 2 } mscLpIlsFwdrLtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrLtCntl tables." ::= { mscLpIlsFwdrLtCntlRowStatusEntry 4 } mscLpIlsFwdrLtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrLtCntl tables." ::= { mscLpIlsFwdrLtCntlRowStatusEntry 10 } mscLpIlsFwdrLtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpIlsFwdrLtCntl 10 } mscLpIlsFwdrLtCntlTopEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrLtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrLtCntlTopTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrLtIndex, mscLpIlsFwdrLtCntlIndex } ::= { mscLpIlsFwdrLtCntlTopTable 1 } MscLpIlsFwdrLtCntlTopEntry ::= SEQUENCE { mscLpIlsFwdrLtCntlTData AsciiString } mscLpIlsFwdrLtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpIlsFwdrLtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. mscLpIlsFwdrTest OBJECT IDENTIFIER ::= { mscLpIlsFwdr 5 } mscLpIlsFwdrTestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpIlsFwdrTest components." ::= { mscLpIlsFwdrTest 1 } mscLpIlsFwdrTestRowStatusEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrTestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpIlsFwdrTest component." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrTestIndex } ::= { mscLpIlsFwdrTestRowStatusTable 1 } MscLpIlsFwdrTestRowStatusEntry ::= SEQUENCE { mscLpIlsFwdrTestRowStatus RowStatus, mscLpIlsFwdrTestComponentName DisplayString, mscLpIlsFwdrTestStorageType StorageType, mscLpIlsFwdrTestIndex NonReplicated } mscLpIlsFwdrTestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpIlsFwdrTest components. These components cannot be added nor deleted." ::= { mscLpIlsFwdrTestRowStatusEntry 1 } mscLpIlsFwdrTestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpIlsFwdrTestRowStatusEntry 2 } mscLpIlsFwdrTestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpIlsFwdrTest tables." ::= { mscLpIlsFwdrTestRowStatusEntry 4 } mscLpIlsFwdrTestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpIlsFwdrTest tables." ::= { mscLpIlsFwdrTestRowStatusEntry 10 } mscLpIlsFwdrTestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { mscLpIlsFwdrTest 10 } mscLpIlsFwdrTestPTOEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrTestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrTestPTOTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrTestIndex } ::= { mscLpIlsFwdrTestPTOTable 1 } MscLpIlsFwdrTestPTOEntry ::= SEQUENCE { mscLpIlsFwdrTestType INTEGER, mscLpIlsFwdrTestFrmSize Unsigned32, mscLpIlsFwdrTestDuration Unsigned32 } mscLpIlsFwdrTestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { mscLpIlsFwdrTestPTOEntry 1 } mscLpIlsFwdrTestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { mscLpIlsFwdrTestPTOEntry 2 } mscLpIlsFwdrTestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { mscLpIlsFwdrTestPTOEntry 3 } mscLpIlsFwdrTestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpIlsFwdrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { mscLpIlsFwdrTest 11 } mscLpIlsFwdrTestResultsEntry OBJECT-TYPE SYNTAX MscLpIlsFwdrTestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpIlsFwdrTestResultsTable." INDEX { mscLpIndex, mscLpIlsFwdrIndex, mscLpIlsFwdrTestIndex } ::= { mscLpIlsFwdrTestResultsTable 1 } MscLpIlsFwdrTestResultsEntry ::= SEQUENCE { mscLpIlsFwdrTestElapsedTime Counter32, mscLpIlsFwdrTestTimeRemaining Unsigned32, mscLpIlsFwdrTestCauseOfTermination INTEGER, mscLpIlsFwdrTestFrmTx PassportCounter64, mscLpIlsFwdrTestBitsTx PassportCounter64, mscLpIlsFwdrTestFrmRx PassportCounter64, mscLpIlsFwdrTestBitsRx PassportCounter64, mscLpIlsFwdrTestErroredFrmRx PassportCounter64 } mscLpIlsFwdrTestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { mscLpIlsFwdrTestResultsEntry 4 } mscLpIlsFwdrTestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { mscLpIlsFwdrTestResultsEntry 5 } mscLpIlsFwdrTestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { mscLpIlsFwdrTestResultsEntry 6 } mscLpIlsFwdrTestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpIlsFwdrTestResultsEntry 7 } mscLpIlsFwdrTestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpIlsFwdrTestResultsEntry 8 } mscLpIlsFwdrTestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpIlsFwdrTestResultsEntry 9 } mscLpIlsFwdrTestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpIlsFwdrTestResultsEntry 10 } mscLpIlsFwdrTestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpIlsFwdrTestResultsEntry 11 } -- Lp/n Ethernet100BaseT/n -- This component defines an instance of a 100BaseT Ethernet station -- attached to a bus. One instance of this component must be created for -- each hardware interface. mscLpEth100 OBJECT IDENTIFIER ::= { mscLp 25 } mscLpEth100RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100 components." ::= { mscLpEth100 1 } mscLpEth100RowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100 component." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100RowStatusTable 1 } MscLpEth100RowStatusEntry ::= SEQUENCE { mscLpEth100RowStatus RowStatus, mscLpEth100ComponentName DisplayString, mscLpEth100StorageType StorageType, mscLpEth100Index Integer32 } mscLpEth100RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100 components. These components can be added and deleted." ::= { mscLpEth100RowStatusEntry 1 } mscLpEth100ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100RowStatusEntry 2 } mscLpEth100StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100 tables." ::= { mscLpEth100RowStatusEntry 4 } mscLpEth100Index OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100 tables." ::= { mscLpEth100RowStatusEntry 10 } mscLpEth100CidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100CidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscLpEth100 10 } mscLpEth100CidDataEntry OBJECT-TYPE SYNTAX MscLpEth100CidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100CidDataTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100CidDataTable 1 } MscLpEth100CidDataEntry ::= SEQUENCE { mscLpEth100CustomerIdentifier Unsigned32 } mscLpEth100CustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscLpEth100CidDataEntry 1 } mscLpEth100IfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100IfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLpEth100 11 } mscLpEth100IfEntryEntry OBJECT-TYPE SYNTAX MscLpEth100IfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100IfEntryTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100IfEntryTable 1 } MscLpEth100IfEntryEntry ::= SEQUENCE { mscLpEth100IfAdminStatus INTEGER, mscLpEth100IfIndex InterfaceIndex } mscLpEth100IfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpEth100IfEntryEntry 1 } mscLpEth100IfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLpEth100IfEntryEntry 2 } mscLpEth100ProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100ProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Eth100BaseT component." ::= { mscLpEth100 12 } mscLpEth100ProvEntry OBJECT-TYPE SYNTAX MscLpEth100ProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100ProvTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100ProvTable 1 } MscLpEth100ProvEntry ::= SEQUENCE { mscLpEth100DuplexMode INTEGER, mscLpEth100LineSpeed Unsigned32, mscLpEth100AutoNegotiation INTEGER, mscLpEth100ApplicationFramerName Link } mscLpEth100DuplexMode OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the duplex mode of the port. This attribute is ignored if auto negotiation is successful." DEFVAL { half } ::= { mscLpEth100ProvEntry 1 } mscLpEth100LineSpeed OBJECT-TYPE SYNTAX Unsigned32 (10 | 100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the operating speed for the Ethernet 100BaseT port. This attribute is ignored if auto negotiation is successful." DEFVAL { 100 } ::= { mscLpEth100ProvEntry 2 } mscLpEth100AutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to select whether or not the port does auto negotiation. The provisionable values of duplexMode and lineSpeed are ignored if auto negotiation is successful. Refer to the operational attribute autoNegStatus for auto negotiation results." DEFVAL { enabled } ::= { mscLpEth100ProvEntry 3 } mscLpEth100ApplicationFramerName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the component name of a Framer which is associated with the Eth100BaseT component. This defines which Lan Application will be using this Eth100BaseT interface." ::= { mscLpEth100ProvEntry 4 } mscLpEth100AdminInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100AdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes pertaining to the vendor of the equipment." ::= { mscLpEth100 13 } mscLpEth100AdminInfoEntry OBJECT-TYPE SYNTAX MscLpEth100AdminInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100AdminInfoTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100AdminInfoTable 1 } MscLpEth100AdminInfoEntry ::= SEQUENCE { mscLpEth100Vendor AsciiString, mscLpEth100CommentText AsciiString } mscLpEth100Vendor OBJECT-TYPE SYNTAX AsciiString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This is the name of the vendor supplying the facility." ::= { mscLpEth100AdminInfoEntry 1 } mscLpEth100CommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "Any miscellaneous text about the facility." ::= { mscLpEth100AdminInfoEntry 2 } mscLpEth100StateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100StateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLpEth100 15 } mscLpEth100StateEntry OBJECT-TYPE SYNTAX MscLpEth100StateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100StateTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100StateTable 1 } MscLpEth100StateEntry ::= SEQUENCE { mscLpEth100AdminState INTEGER, mscLpEth100OperationalState INTEGER, mscLpEth100UsageState INTEGER } mscLpEth100AdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLpEth100StateEntry 1 } mscLpEth100OperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLpEth100StateEntry 2 } mscLpEth100UsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLpEth100StateEntry 3 } mscLpEth100OperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100OperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLpEth100 16 } mscLpEth100OperStatusEntry OBJECT-TYPE SYNTAX MscLpEth100OperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100OperStatusTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100OperStatusTable 1 } MscLpEth100OperStatusEntry ::= SEQUENCE { mscLpEth100SnmpOperStatus INTEGER } mscLpEth100SnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLpEth100OperStatusEntry 1 } mscLpEth100OperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100OperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Port operational attributes of the Eth100BaseT component." ::= { mscLpEth100 17 } mscLpEth100OperEntry OBJECT-TYPE SYNTAX MscLpEth100OperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100OperTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100OperTable 1 } MscLpEth100OperEntry ::= SEQUENCE { mscLpEth100MacAddress MacAddress, mscLpEth100AutoNegStatus INTEGER, mscLpEth100ActualLineSpeed Unsigned32, mscLpEth100ActualDuplexMode INTEGER } mscLpEth100MacAddress OBJECT-TYPE SYNTAX MacAddress (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the medium access controller (MAC) address. The MAC address is displayed in canonical format." ::= { mscLpEth100OperEntry 1 } mscLpEth100AutoNegStatus OBJECT-TYPE SYNTAX INTEGER { succeeded(1), failed(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the status of the auto negotiation at the Phy level." ::= { mscLpEth100OperEntry 4 } mscLpEth100ActualLineSpeed OBJECT-TYPE SYNTAX Unsigned32 (10 | 100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the line speed of the Eth100BaseT port." ::= { mscLpEth100OperEntry 5 } mscLpEth100ActualDuplexMode OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the hardware is in half duplex or full duplex mode." ::= { mscLpEth100OperEntry 6 } mscLpEth100Eth100StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100Eth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistical attributes for the Eth100BaseT component." ::= { mscLpEth100 18 } mscLpEth100Eth100StatsEntry OBJECT-TYPE SYNTAX MscLpEth100Eth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100Eth100StatsTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100Eth100StatsTable 1 } MscLpEth100Eth100StatsEntry ::= SEQUENCE { mscLpEth100FramesTransmittedOk Counter32, mscLpEth100FramesReceivedOk Counter32, mscLpEth100OctetsTransmittedOk Counter32, mscLpEth100OctetsReceivedOk Counter32, mscLpEth100UndersizeFrames Counter32, mscLpEth100ReceivedOctetsIntoRouterBr Counter32, mscLpEth100ReceivedFramesIntoRouterBr Counter32 } mscLpEth100FramesTransmittedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were transmitted without errors. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 1 } mscLpEth100FramesReceivedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were received without errors. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 2 } mscLpEth100OctetsTransmittedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets which were transmitted without errors. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 3 } mscLpEth100OctetsReceivedOk OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets which were received without errors. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 4 } mscLpEth100UndersizeFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames that were received but were less than the minimum size (64 bytes). This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 5 } mscLpEth100ReceivedOctetsIntoRouterBr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets that were not hardware switched but were passed the Router or Bridge software. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 6 } mscLpEth100ReceivedFramesIntoRouterBr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which were not hardware switched but were passed to the Router or Bridge software. This counter wraps to zero after it reaches its maximum value." ::= { mscLpEth100Eth100StatsEntry 7 } mscLpEth100StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistical attributes for the Ethernet component." ::= { mscLpEth100 19 } mscLpEth100StatsEntry OBJECT-TYPE SYNTAX MscLpEth100StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100StatsTable." INDEX { mscLpIndex, mscLpEth100Index } ::= { mscLpEth100StatsTable 1 } MscLpEth100StatsEntry ::= SEQUENCE { mscLpEth100AlignmentErrors Counter32, mscLpEth100FcsErrors Counter32, mscLpEth100SingleCollisionFrames Counter32, mscLpEth100MultipleCollisionFrames Counter32, mscLpEth100SqeTestErrors Counter32, mscLpEth100DeferredTransmissions Counter32, mscLpEth100LateCollisions Counter32, mscLpEth100ExcessiveCollisions Counter32, mscLpEth100MacTransmitErrors Counter32, mscLpEth100CarrierSenseErrors Counter32, mscLpEth100FrameTooLongs Counter32, mscLpEth100MacReceiveErrors Counter32 } mscLpEth100AlignmentErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The alignmentErrors counter indicates the number of frames received which were not an integral number of octets in length. Frames will be checked for alignmentErrors before they are checked for Frame Check Sequence (FCS) errors. If there is an alignment error, the error will only be counted here and not in fcsErrors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 2 } mscLpEth100FcsErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the number of frames received which were an integral number of octets in length and did not pass the FCS check. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 3 } mscLpEth100SingleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The singleCollisionFrames counter indicates the number of frames successfully transmitted which experienced exactly one collision. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 4 } mscLpEth100MultipleCollisionFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The multipleCollisionFrames counter indicates the number of frames successfully transmitted which experienced more than one collision. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 5 } mscLpEth100SqeTestErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter indicates the number of times the 'SQE Test Error' message has been generated for the station. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 6 } mscLpEth100DeferredTransmissions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The deferredTransmissions counter indicates the number of frames which experienced a transmission delay because the medium was busy. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 7 } mscLpEth100LateCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The lateCollisions counter indicates the number of times a collision was detected later than 512 bit-times into the transmission of a packet. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 8 } mscLpEth100ExcessiveCollisions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The excessiveCollisions counter indicates the number of frames which failed to get transmitted due to excessive collisions. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 9 } mscLpEth100MacTransmitErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) transmit error counter indicates the number of times that a transmission failed due to internal MAC transmit errors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 10 } mscLpEth100CarrierSenseErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The carrier sense error counter indicates the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 11 } mscLpEth100FrameTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The frame too long counter indicates the number of frames received which exceeded the maximum frame size. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 12 } mscLpEth100MacReceiveErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The Medium Access Controller (MAC) receive error counter indicates the number of times a receive failed due to internal MAC receive errors. This counter wraps around after it exceeds its maximum value." ::= { mscLpEth100StatsEntry 13 } -- Lp/n Fddi/n LanTest, or -- Lp/n Ethernet/n LanTest, or -- Lp/n TokenRing/n LanTest, or -- Lp/n IlsForwarder/n LanTest -- The LanTest component is used to control testing on LAN -- interfaces. This includes LLC layer loopback, on-card loopback, -- SNMP required tests, and any testing to be done in the lab or -- manufacturing. mscLpEth100Lt OBJECT IDENTIFIER ::= { mscLpEth100 2 } mscLpEth100LtRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100Lt components." ::= { mscLpEth100Lt 1 } mscLpEth100LtRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100Lt component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex } ::= { mscLpEth100LtRowStatusTable 1 } MscLpEth100LtRowStatusEntry ::= SEQUENCE { mscLpEth100LtRowStatus RowStatus, mscLpEth100LtComponentName DisplayString, mscLpEth100LtStorageType StorageType, mscLpEth100LtIndex NonReplicated } mscLpEth100LtRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100Lt components. These components cannot be added nor deleted." ::= { mscLpEth100LtRowStatusEntry 1 } mscLpEth100LtComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtRowStatusEntry 2 } mscLpEth100LtStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100Lt tables." ::= { mscLpEth100LtRowStatusEntry 4 } mscLpEth100LtIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100Lt tables." ::= { mscLpEth100LtRowStatusEntry 10 } mscLpEth100LtTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100Lt 20 } mscLpEth100LtTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex } ::= { mscLpEth100LtTopTable 1 } MscLpEth100LtTopEntry ::= SEQUENCE { mscLpEth100LtTData AsciiString } mscLpEth100LtTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtTopEntry 1 } -- This component compares frames received from the hardware and -- emulator during testing. mscLpEth100LtFrmCmp OBJECT IDENTIFIER ::= { mscLpEth100Lt 2 } mscLpEth100LtFrmCmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFrmCmp components." ::= { mscLpEth100LtFrmCmp 1 } mscLpEth100LtFrmCmpRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFrmCmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFrmCmp component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFrmCmpIndex } ::= { mscLpEth100LtFrmCmpRowStatusTable 1 } MscLpEth100LtFrmCmpRowStatusEntry ::= SEQUENCE { mscLpEth100LtFrmCmpRowStatus RowStatus, mscLpEth100LtFrmCmpComponentName DisplayString, mscLpEth100LtFrmCmpStorageType StorageType, mscLpEth100LtFrmCmpIndex NonReplicated } mscLpEth100LtFrmCmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFrmCmp components. These components cannot be added nor deleted." ::= { mscLpEth100LtFrmCmpRowStatusEntry 1 } mscLpEth100LtFrmCmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFrmCmpRowStatusEntry 2 } mscLpEth100LtFrmCmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFrmCmp tables." ::= { mscLpEth100LtFrmCmpRowStatusEntry 4 } mscLpEth100LtFrmCmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFrmCmp tables." ::= { mscLpEth100LtFrmCmpRowStatusEntry 10 } mscLpEth100LtFrmCmpTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFrmCmp 10 } mscLpEth100LtFrmCmpTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFrmCmpTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFrmCmpTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFrmCmpIndex } ::= { mscLpEth100LtFrmCmpTopTable 1 } MscLpEth100LtFrmCmpTopEntry ::= SEQUENCE { mscLpEth100LtFrmCmpTData AsciiString } mscLpEth100LtFrmCmpTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFrmCmpTopEntry 1 } -- This component receives its input from FrameBuild and places it -- upon the hardware which sends it to the appropriate emulator. mscLpEth100LtFrmCpy OBJECT IDENTIFIER ::= { mscLpEth100Lt 3 } mscLpEth100LtFrmCpyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFrmCpy components." ::= { mscLpEth100LtFrmCpy 1 } mscLpEth100LtFrmCpyRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFrmCpyRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFrmCpy component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFrmCpyIndex } ::= { mscLpEth100LtFrmCpyRowStatusTable 1 } MscLpEth100LtFrmCpyRowStatusEntry ::= SEQUENCE { mscLpEth100LtFrmCpyRowStatus RowStatus, mscLpEth100LtFrmCpyComponentName DisplayString, mscLpEth100LtFrmCpyStorageType StorageType, mscLpEth100LtFrmCpyIndex NonReplicated } mscLpEth100LtFrmCpyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFrmCpy components. These components cannot be added nor deleted." ::= { mscLpEth100LtFrmCpyRowStatusEntry 1 } mscLpEth100LtFrmCpyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFrmCpyRowStatusEntry 2 } mscLpEth100LtFrmCpyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFrmCpy tables." ::= { mscLpEth100LtFrmCpyRowStatusEntry 4 } mscLpEth100LtFrmCpyIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFrmCpy tables." ::= { mscLpEth100LtFrmCpyRowStatusEntry 10 } mscLpEth100LtFrmCpyTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFrmCpy 10 } mscLpEth100LtFrmCpyTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFrmCpyTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFrmCpyTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFrmCpyIndex } ::= { mscLpEth100LtFrmCpyTopTable 1 } MscLpEth100LtFrmCpyTopEntry ::= SEQUENCE { mscLpEth100LtFrmCpyTData AsciiString } mscLpEth100LtFrmCpyTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFrmCpyTopEntry 1 } -- This component controls the emulator and hardware to ensure -- frames output from each will match in FrameCompare. mscLpEth100LtPrtCfg OBJECT IDENTIFIER ::= { mscLpEth100Lt 4 } mscLpEth100LtPrtCfgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtPrtCfg components." ::= { mscLpEth100LtPrtCfg 1 } mscLpEth100LtPrtCfgRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtPrtCfgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtPrtCfg component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtPrtCfgIndex } ::= { mscLpEth100LtPrtCfgRowStatusTable 1 } MscLpEth100LtPrtCfgRowStatusEntry ::= SEQUENCE { mscLpEth100LtPrtCfgRowStatus RowStatus, mscLpEth100LtPrtCfgComponentName DisplayString, mscLpEth100LtPrtCfgStorageType StorageType, mscLpEth100LtPrtCfgIndex NonReplicated } mscLpEth100LtPrtCfgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtPrtCfg components. These components cannot be added nor deleted." ::= { mscLpEth100LtPrtCfgRowStatusEntry 1 } mscLpEth100LtPrtCfgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtPrtCfgRowStatusEntry 2 } mscLpEth100LtPrtCfgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtPrtCfg tables." ::= { mscLpEth100LtPrtCfgRowStatusEntry 4 } mscLpEth100LtPrtCfgIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtPrtCfg tables." ::= { mscLpEth100LtPrtCfgRowStatusEntry 10 } mscLpEth100LtPrtCfgTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtPrtCfg 10 } mscLpEth100LtPrtCfgTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtPrtCfgTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtPrtCfgTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtPrtCfgIndex } ::= { mscLpEth100LtPrtCfgTopTable 1 } MscLpEth100LtPrtCfgTopEntry ::= SEQUENCE { mscLpEth100LtPrtCfgTData AsciiString } mscLpEth100LtPrtCfgTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtPrtCfgTopEntry 1 } -- LanTest Framebuild -- This component controls the building of all frames built and sent by -- the LanTest component. Each component under FrameBuild builds -- a portion of a packet or frame. mscLpEth100LtFb OBJECT IDENTIFIER ::= { mscLpEth100Lt 5 } mscLpEth100LtFbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFb components." ::= { mscLpEth100LtFb 1 } mscLpEth100LtFbRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFb component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex } ::= { mscLpEth100LtFbRowStatusTable 1 } MscLpEth100LtFbRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbRowStatus RowStatus, mscLpEth100LtFbComponentName DisplayString, mscLpEth100LtFbStorageType StorageType, mscLpEth100LtFbIndex NonReplicated } mscLpEth100LtFbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFb components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbRowStatusEntry 1 } mscLpEth100LtFbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbRowStatusEntry 2 } mscLpEth100LtFbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFb tables." ::= { mscLpEth100LtFbRowStatusEntry 4 } mscLpEth100LtFbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFb tables." ::= { mscLpEth100LtFbRowStatusEntry 10 } mscLpEth100LtFbTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFb 20 } mscLpEth100LtFbTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex } ::= { mscLpEth100LtFbTopTable 1 } MscLpEth100LtFbTopEntry ::= SEQUENCE { mscLpEth100LtFbTData AsciiString } mscLpEth100LtFbTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbTopEntry 1 } -- LanTest TransmitInfo -- This component builds a transmit header which is attached to all -- frames transmitted on LAN interfaces. mscLpEth100LtFbTxInfo OBJECT IDENTIFIER ::= { mscLpEth100LtFb 2 } mscLpEth100LtFbTxInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbTxInfo components." ::= { mscLpEth100LtFbTxInfo 1 } mscLpEth100LtFbTxInfoRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbTxInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbTxInfo component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbTxInfoIndex } ::= { mscLpEth100LtFbTxInfoRowStatusTable 1 } MscLpEth100LtFbTxInfoRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbTxInfoRowStatus RowStatus, mscLpEth100LtFbTxInfoComponentName DisplayString, mscLpEth100LtFbTxInfoStorageType StorageType, mscLpEth100LtFbTxInfoIndex NonReplicated } mscLpEth100LtFbTxInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbTxInfo components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbTxInfoRowStatusEntry 1 } mscLpEth100LtFbTxInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbTxInfoRowStatusEntry 2 } mscLpEth100LtFbTxInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbTxInfo tables." ::= { mscLpEth100LtFbTxInfoRowStatusEntry 4 } mscLpEth100LtFbTxInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbTxInfo tables." ::= { mscLpEth100LtFbTxInfoRowStatusEntry 10 } mscLpEth100LtFbTxInfoTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbTxInfo 10 } mscLpEth100LtFbTxInfoTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbTxInfoTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbTxInfoTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbTxInfoIndex } ::= { mscLpEth100LtFbTxInfoTopTable 1 } MscLpEth100LtFbTxInfoTopEntry ::= SEQUENCE { mscLpEth100LtFbTxInfoTData AsciiString } mscLpEth100LtFbTxInfoTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbTxInfoTopEntry 1 } -- LanTest FddiMac -- This component builds an FDDI MAC header which is attached to -- all FDDI frames. mscLpEth100LtFbFddiMac OBJECT IDENTIFIER ::= { mscLpEth100LtFb 3 } mscLpEth100LtFbFddiMacRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbFddiMac components." ::= { mscLpEth100LtFbFddiMac 1 } mscLpEth100LtFbFddiMacRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbFddiMacRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbFddiMac component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbFddiMacIndex } ::= { mscLpEth100LtFbFddiMacRowStatusTable 1 } MscLpEth100LtFbFddiMacRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbFddiMacRowStatus RowStatus, mscLpEth100LtFbFddiMacComponentName DisplayString, mscLpEth100LtFbFddiMacStorageType StorageType, mscLpEth100LtFbFddiMacIndex NonReplicated } mscLpEth100LtFbFddiMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbFddiMac components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbFddiMacRowStatusEntry 1 } mscLpEth100LtFbFddiMacComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbFddiMacRowStatusEntry 2 } mscLpEth100LtFbFddiMacStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbFddiMac tables." ::= { mscLpEth100LtFbFddiMacRowStatusEntry 4 } mscLpEth100LtFbFddiMacIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbFddiMac tables." ::= { mscLpEth100LtFbFddiMacRowStatusEntry 10 } mscLpEth100LtFbFddiMacTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbFddiMac 10 } mscLpEth100LtFbFddiMacTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbFddiMacTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbFddiMacTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbFddiMacIndex } ::= { mscLpEth100LtFbFddiMacTopTable 1 } MscLpEth100LtFbFddiMacTopEntry ::= SEQUENCE { mscLpEth100LtFbFddiMacTData AsciiString } mscLpEth100LtFbFddiMacTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbFddiMacTopEntry 1 } -- LanTest EthernetMac -- This component builds an Ethernet MAC header which is attached -- to all Ethernet frames. mscLpEth100LtFbMacEnet OBJECT IDENTIFIER ::= { mscLpEth100LtFb 4 } mscLpEth100LtFbMacEnetRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbMacEnet components." ::= { mscLpEth100LtFbMacEnet 1 } mscLpEth100LtFbMacEnetRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbMacEnetRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbMacEnet component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbMacEnetIndex } ::= { mscLpEth100LtFbMacEnetRowStatusTable 1 } MscLpEth100LtFbMacEnetRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbMacEnetRowStatus RowStatus, mscLpEth100LtFbMacEnetComponentName DisplayString, mscLpEth100LtFbMacEnetStorageType StorageType, mscLpEth100LtFbMacEnetIndex NonReplicated } mscLpEth100LtFbMacEnetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbMacEnet components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbMacEnetRowStatusEntry 1 } mscLpEth100LtFbMacEnetComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbMacEnetRowStatusEntry 2 } mscLpEth100LtFbMacEnetStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbMacEnet tables." ::= { mscLpEth100LtFbMacEnetRowStatusEntry 4 } mscLpEth100LtFbMacEnetIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbMacEnet tables." ::= { mscLpEth100LtFbMacEnetRowStatusEntry 10 } mscLpEth100LtFbMacEnetTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbMacEnet 10 } mscLpEth100LtFbMacEnetTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbMacEnetTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbMacEnetTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbMacEnetIndex } ::= { mscLpEth100LtFbMacEnetTopTable 1 } MscLpEth100LtFbMacEnetTopEntry ::= SEQUENCE { mscLpEth100LtFbMacEnetTData AsciiString } mscLpEth100LtFbMacEnetTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbMacEnetTopEntry 1 } -- LanTest TokenRingMac -- This component builds a Token Ring MAC header which is attached -- to all Token Ring frames. mscLpEth100LtFbMacTr OBJECT IDENTIFIER ::= { mscLpEth100LtFb 5 } mscLpEth100LtFbMacTrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbMacTr components." ::= { mscLpEth100LtFbMacTr 1 } mscLpEth100LtFbMacTrRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbMacTrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbMacTr component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbMacTrIndex } ::= { mscLpEth100LtFbMacTrRowStatusTable 1 } MscLpEth100LtFbMacTrRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbMacTrRowStatus RowStatus, mscLpEth100LtFbMacTrComponentName DisplayString, mscLpEth100LtFbMacTrStorageType StorageType, mscLpEth100LtFbMacTrIndex NonReplicated } mscLpEth100LtFbMacTrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbMacTr components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbMacTrRowStatusEntry 1 } mscLpEth100LtFbMacTrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbMacTrRowStatusEntry 2 } mscLpEth100LtFbMacTrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbMacTr tables." ::= { mscLpEth100LtFbMacTrRowStatusEntry 4 } mscLpEth100LtFbMacTrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbMacTr tables." ::= { mscLpEth100LtFbMacTrRowStatusEntry 10 } mscLpEth100LtFbMacTrTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbMacTr 10 } mscLpEth100LtFbMacTrTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbMacTrTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbMacTrTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbMacTrIndex } ::= { mscLpEth100LtFbMacTrTopTable 1 } MscLpEth100LtFbMacTrTopEntry ::= SEQUENCE { mscLpEth100LtFbMacTrTData AsciiString } mscLpEth100LtFbMacTrTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbMacTrTopEntry 1 } -- This component adds a data field to frame. mscLpEth100LtFbData OBJECT IDENTIFIER ::= { mscLpEth100LtFb 6 } mscLpEth100LtFbDataRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbData components." ::= { mscLpEth100LtFbData 1 } mscLpEth100LtFbDataRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbDataRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbData component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbDataIndex } ::= { mscLpEth100LtFbDataRowStatusTable 1 } MscLpEth100LtFbDataRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbDataRowStatus RowStatus, mscLpEth100LtFbDataComponentName DisplayString, mscLpEth100LtFbDataStorageType StorageType, mscLpEth100LtFbDataIndex NonReplicated } mscLpEth100LtFbDataRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbData components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbDataRowStatusEntry 1 } mscLpEth100LtFbDataComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbDataRowStatusEntry 2 } mscLpEth100LtFbDataStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbData tables." ::= { mscLpEth100LtFbDataRowStatusEntry 4 } mscLpEth100LtFbDataIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbData tables." ::= { mscLpEth100LtFbDataRowStatusEntry 10 } mscLpEth100LtFbDataTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbData 10 } mscLpEth100LtFbDataTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbDataTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbDataTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbDataIndex } ::= { mscLpEth100LtFbDataTopTable 1 } MscLpEth100LtFbDataTopEntry ::= SEQUENCE { mscLpEth100LtFbDataTData AsciiString } mscLpEth100LtFbDataTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbDataTopEntry 1 } -- LanTest IpHeader -- This component adds an IP header to a frame or packet. mscLpEth100LtFbIpH OBJECT IDENTIFIER ::= { mscLpEth100LtFb 7 } mscLpEth100LtFbIpHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbIpH components." ::= { mscLpEth100LtFbIpH 1 } mscLpEth100LtFbIpHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbIpHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbIpH component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbIpHIndex } ::= { mscLpEth100LtFbIpHRowStatusTable 1 } MscLpEth100LtFbIpHRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbIpHRowStatus RowStatus, mscLpEth100LtFbIpHComponentName DisplayString, mscLpEth100LtFbIpHStorageType StorageType, mscLpEth100LtFbIpHIndex NonReplicated } mscLpEth100LtFbIpHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbIpH components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbIpHRowStatusEntry 1 } mscLpEth100LtFbIpHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbIpHRowStatusEntry 2 } mscLpEth100LtFbIpHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbIpH tables." ::= { mscLpEth100LtFbIpHRowStatusEntry 4 } mscLpEth100LtFbIpHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbIpH tables." ::= { mscLpEth100LtFbIpHRowStatusEntry 10 } mscLpEth100LtFbIpHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbIpH 10 } mscLpEth100LtFbIpHTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbIpHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbIpHTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbIpHIndex } ::= { mscLpEth100LtFbIpHTopTable 1 } MscLpEth100LtFbIpHTopEntry ::= SEQUENCE { mscLpEth100LtFbIpHTData AsciiString } mscLpEth100LtFbIpHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbIpHTopEntry 1 } -- LanTest LlcHeader -- This component adds an LLC 802.2 or Ethernet header to a frame -- or packet. mscLpEth100LtFbLlch OBJECT IDENTIFIER ::= { mscLpEth100LtFb 8 } mscLpEth100LtFbLlchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbLlch components." ::= { mscLpEth100LtFbLlch 1 } mscLpEth100LtFbLlchRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbLlchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbLlch component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbLlchIndex } ::= { mscLpEth100LtFbLlchRowStatusTable 1 } MscLpEth100LtFbLlchRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbLlchRowStatus RowStatus, mscLpEth100LtFbLlchComponentName DisplayString, mscLpEth100LtFbLlchStorageType StorageType, mscLpEth100LtFbLlchIndex NonReplicated } mscLpEth100LtFbLlchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbLlch components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbLlchRowStatusEntry 1 } mscLpEth100LtFbLlchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbLlchRowStatusEntry 2 } mscLpEth100LtFbLlchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbLlch tables." ::= { mscLpEth100LtFbLlchRowStatusEntry 4 } mscLpEth100LtFbLlchIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbLlch tables." ::= { mscLpEth100LtFbLlchRowStatusEntry 10 } mscLpEth100LtFbLlchTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbLlch 10 } mscLpEth100LtFbLlchTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbLlchTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbLlchTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbLlchIndex } ::= { mscLpEth100LtFbLlchTopTable 1 } MscLpEth100LtFbLlchTopEntry ::= SEQUENCE { mscLpEth100LtFbLlchTData AsciiString } mscLpEth100LtFbLlchTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbLlchTopEntry 1 } -- This component adds an AppleTalk header to a frame or packet. mscLpEth100LtFbAppleH OBJECT IDENTIFIER ::= { mscLpEth100LtFb 9 } mscLpEth100LtFbAppleHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbAppleH components." ::= { mscLpEth100LtFbAppleH 1 } mscLpEth100LtFbAppleHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbAppleHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbAppleH component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbAppleHIndex } ::= { mscLpEth100LtFbAppleHRowStatusTable 1 } MscLpEth100LtFbAppleHRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbAppleHRowStatus RowStatus, mscLpEth100LtFbAppleHComponentName DisplayString, mscLpEth100LtFbAppleHStorageType StorageType, mscLpEth100LtFbAppleHIndex NonReplicated } mscLpEth100LtFbAppleHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbAppleH components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbAppleHRowStatusEntry 1 } mscLpEth100LtFbAppleHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbAppleHRowStatusEntry 2 } mscLpEth100LtFbAppleHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbAppleH tables." ::= { mscLpEth100LtFbAppleHRowStatusEntry 4 } mscLpEth100LtFbAppleHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbAppleH tables." ::= { mscLpEth100LtFbAppleHRowStatusEntry 10 } mscLpEth100LtFbAppleHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbAppleH 10 } mscLpEth100LtFbAppleHTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbAppleHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbAppleHTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbAppleHIndex } ::= { mscLpEth100LtFbAppleHTopTable 1 } MscLpEth100LtFbAppleHTopEntry ::= SEQUENCE { mscLpEth100LtFbAppleHTData AsciiString } mscLpEth100LtFbAppleHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbAppleHTopEntry 1 } -- This component adds an IPX header to a frame or packet. mscLpEth100LtFbIpxH OBJECT IDENTIFIER ::= { mscLpEth100LtFb 10 } mscLpEth100LtFbIpxHRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtFbIpxH components." ::= { mscLpEth100LtFbIpxH 1 } mscLpEth100LtFbIpxHRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbIpxHRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtFbIpxH component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbIpxHIndex } ::= { mscLpEth100LtFbIpxHRowStatusTable 1 } MscLpEth100LtFbIpxHRowStatusEntry ::= SEQUENCE { mscLpEth100LtFbIpxHRowStatus RowStatus, mscLpEth100LtFbIpxHComponentName DisplayString, mscLpEth100LtFbIpxHStorageType StorageType, mscLpEth100LtFbIpxHIndex NonReplicated } mscLpEth100LtFbIpxHRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtFbIpxH components. These components cannot be added nor deleted." ::= { mscLpEth100LtFbIpxHRowStatusEntry 1 } mscLpEth100LtFbIpxHComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtFbIpxHRowStatusEntry 2 } mscLpEth100LtFbIpxHStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtFbIpxH tables." ::= { mscLpEth100LtFbIpxHRowStatusEntry 4 } mscLpEth100LtFbIpxHIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtFbIpxH tables." ::= { mscLpEth100LtFbIpxHRowStatusEntry 10 } mscLpEth100LtFbIpxHTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtFbIpxH 10 } mscLpEth100LtFbIpxHTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtFbIpxHTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtFbIpxHTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtFbIndex, mscLpEth100LtFbIpxHIndex } ::= { mscLpEth100LtFbIpxHTopTable 1 } MscLpEth100LtFbIpxHTopEntry ::= SEQUENCE { mscLpEth100LtFbIpxHTData AsciiString } mscLpEth100LtFbIpxHTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtFbIpxHTopEntry 1 } -- LanTest Control -- This component controls the overall testing by telling the -- FrameBuild component to start and check the FrameCompare -- component to see if the test is complete. mscLpEth100LtCntl OBJECT IDENTIFIER ::= { mscLpEth100Lt 6 } mscLpEth100LtCntlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100LtCntl components." ::= { mscLpEth100LtCntl 1 } mscLpEth100LtCntlRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100LtCntlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100LtCntl component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtCntlIndex } ::= { mscLpEth100LtCntlRowStatusTable 1 } MscLpEth100LtCntlRowStatusEntry ::= SEQUENCE { mscLpEth100LtCntlRowStatus RowStatus, mscLpEth100LtCntlComponentName DisplayString, mscLpEth100LtCntlStorageType StorageType, mscLpEth100LtCntlIndex NonReplicated } mscLpEth100LtCntlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100LtCntl components. These components cannot be added nor deleted." ::= { mscLpEth100LtCntlRowStatusEntry 1 } mscLpEth100LtCntlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100LtCntlRowStatusEntry 2 } mscLpEth100LtCntlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100LtCntl tables." ::= { mscLpEth100LtCntlRowStatusEntry 4 } mscLpEth100LtCntlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100LtCntl tables." ::= { mscLpEth100LtCntlRowStatusEntry 10 } mscLpEth100LtCntlTopTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100LtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanTest component and its subcomponents." ::= { mscLpEth100LtCntl 10 } mscLpEth100LtCntlTopEntry OBJECT-TYPE SYNTAX MscLpEth100LtCntlTopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100LtCntlTopTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100LtIndex, mscLpEth100LtCntlIndex } ::= { mscLpEth100LtCntlTopTable 1 } MscLpEth100LtCntlTopEntry ::= SEQUENCE { mscLpEth100LtCntlTData AsciiString } mscLpEth100LtCntlTData OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to display and set attributes." ::= { mscLpEth100LtCntlTopEntry 1 } -- Lp/n Fddi/n Test, or -- Lp/n Ethernet/n Test, or -- Lp/n TokenRing/n Test, or -- Lp/n IlsForwarder/n Test -- The Test component is used to do StartUp port test for LAN cards. mscLpEth100Test OBJECT IDENTIFIER ::= { mscLpEth100 3 } mscLpEth100TestRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100TestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLpEth100Test components." ::= { mscLpEth100Test 1 } mscLpEth100TestRowStatusEntry OBJECT-TYPE SYNTAX MscLpEth100TestRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLpEth100Test component." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100TestIndex } ::= { mscLpEth100TestRowStatusTable 1 } MscLpEth100TestRowStatusEntry ::= SEQUENCE { mscLpEth100TestRowStatus RowStatus, mscLpEth100TestComponentName DisplayString, mscLpEth100TestStorageType StorageType, mscLpEth100TestIndex NonReplicated } mscLpEth100TestRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLpEth100Test components. These components cannot be added nor deleted." ::= { mscLpEth100TestRowStatusEntry 1 } mscLpEth100TestComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLpEth100TestRowStatusEntry 2 } mscLpEth100TestStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLpEth100Test tables." ::= { mscLpEth100TestRowStatusEntry 4 } mscLpEth100TestIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLpEth100Test tables." ::= { mscLpEth100TestRowStatusEntry 10 } mscLpEth100TestPTOTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100TestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for the LanPortTest component." ::= { mscLpEth100Test 10 } mscLpEth100TestPTOEntry OBJECT-TYPE SYNTAX MscLpEth100TestPTOEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100TestPTOTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100TestIndex } ::= { mscLpEth100TestPTOTable 1 } MscLpEth100TestPTOEntry ::= SEQUENCE { mscLpEth100TestType INTEGER, mscLpEth100TestFrmSize Unsigned32, mscLpEth100TestDuration Unsigned32 } mscLpEth100TestType OBJECT-TYPE SYNTAX INTEGER { onCard(0), normal(1), wrapA(257), wrapB(258), thruA(259), thruB(260), extWrapA(263), extWrapB(264), extThruA(265), extThruB(266), extWrapAB(267), extWrapBA(268) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test; manual test assumes the line is looped back externally and a bit error rate test is performed; localLoop test loops back the local modem and performs a bit error rate test; remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test; externalLoop test loops back the line to the far end; payloadLoop test only loops back the payload data received from the incoming line; Note that localLoop, remoteLoop and payloadLoop are not supported by all function processors." ::= { mscLpEth100TestPTOEntry 1 } mscLpEth100TestFrmSize OBJECT-TYPE SYNTAX Unsigned32 (4..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the size of the test data frames in number of bytes." DEFVAL { 1024 } ::= { mscLpEth100TestPTOEntry 2 } mscLpEth100TestDuration OBJECT-TYPE SYNTAX Unsigned32 (1..30240) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop." DEFVAL { 1 } ::= { mscLpEth100TestPTOEntry 3 } mscLpEth100TestResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLpEth100TestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all the statistics related attributes of the Test component." ::= { mscLpEth100Test 11 } mscLpEth100TestResultsEntry OBJECT-TYPE SYNTAX MscLpEth100TestResultsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLpEth100TestResultsTable." INDEX { mscLpIndex, mscLpEth100Index, mscLpEth100TestIndex } ::= { mscLpEth100TestResultsTable 1 } MscLpEth100TestResultsEntry ::= SEQUENCE { mscLpEth100TestElapsedTime Counter32, mscLpEth100TestTimeRemaining Unsigned32, mscLpEth100TestCauseOfTermination INTEGER, mscLpEth100TestFrmTx PassportCounter64, mscLpEth100TestBitsTx PassportCounter64, mscLpEth100TestFrmRx PassportCounter64, mscLpEth100TestBitsRx PassportCounter64, mscLpEth100TestErroredFrmRx PassportCounter64 } mscLpEth100TestElapsedTime OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted." ::= { mscLpEth100TestResultsEntry 4 } mscLpEth100TestTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute." DEFVAL { 0 } ::= { mscLpEth100TestResultsEntry 5 } mscLpEth100TestCauseOfTermination OBJECT-TYPE SYNTAX INTEGER { testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the reason the test is terminated." DEFVAL { neverStarted } ::= { mscLpEth100TestResultsEntry 6 } mscLpEth100TestFrmTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpEth100TestResultsEntry 7 } mscLpEth100TestBitsTx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits sent during the test period. This counter is not expected to reach its maximum value." ::= { mscLpEth100TestResultsEntry 8 } mscLpEth100TestFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEth100TestResultsEntry 9 } mscLpEth100TestBitsRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEth100TestResultsEntry 10 } mscLpEth100TestErroredFrmRx OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value." ::= { mscLpEth100TestResultsEntry 11 } -- LanApplication/n -- The LanApplication component, using the Framer subcomponent, is -- used to provide the interface between the VirtualRouter ProtocolPort -- and a LAN component such as Ethernet, Fddi, or TokenRing. mscLa OBJECT IDENTIFIER ::= { mscComponents 105 } mscLaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLa components." ::= { mscLa 1 } mscLaRowStatusEntry OBJECT-TYPE SYNTAX MscLaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLa component." INDEX { mscLaIndex } ::= { mscLaRowStatusTable 1 } MscLaRowStatusEntry ::= SEQUENCE { mscLaRowStatus RowStatus, mscLaComponentName DisplayString, mscLaStorageType StorageType, mscLaIndex Integer32 } mscLaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLa components. These components can be added and deleted." ::= { mscLaRowStatusEntry 1 } mscLaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLaRowStatusEntry 2 } mscLaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLa tables." ::= { mscLaRowStatusEntry 4 } mscLaIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLa tables." ::= { mscLaRowStatusEntry 10 } mscLaCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscLa 10 } mscLaCidDataEntry OBJECT-TYPE SYNTAX MscLaCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaCidDataTable." INDEX { mscLaIndex } ::= { mscLaCidDataTable 1 } MscLaCidDataEntry ::= SEQUENCE { mscLaCustomerIdentifier Unsigned32 } mscLaCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscLaCidDataEntry 1 } mscLaMediaProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Media Application component." ::= { mscLa 11 } mscLaMediaProvEntry OBJECT-TYPE SYNTAX MscLaMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaMediaProvTable." INDEX { mscLaIndex } ::= { mscLaMediaProvTable 1 } MscLaMediaProvEntry ::= SEQUENCE { mscLaLinkToProtocolPort Link } mscLaLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates the application with a protocol port." ::= { mscLaMediaProvEntry 1 } mscLaIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscLa 12 } mscLaIfEntryEntry OBJECT-TYPE SYNTAX MscLaIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaIfEntryTable." INDEX { mscLaIndex } ::= { mscLaIfEntryTable 1 } MscLaIfEntryEntry ::= SEQUENCE { mscLaIfAdminStatus INTEGER, mscLaIfIndex InterfaceIndex } mscLaIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLaIfEntryEntry 1 } mscLaIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscLaIfEntryEntry 2 } mscLaStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscLa 13 } mscLaStateEntry OBJECT-TYPE SYNTAX MscLaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaStateTable." INDEX { mscLaIndex } ::= { mscLaStateTable 1 } MscLaStateEntry ::= SEQUENCE { mscLaAdminState INTEGER, mscLaOperationalState INTEGER, mscLaUsageState INTEGER } mscLaAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscLaStateEntry 1 } mscLaOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscLaStateEntry 2 } mscLaUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscLaStateEntry 3 } mscLaOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscLa 14 } mscLaOperStatusEntry OBJECT-TYPE SYNTAX MscLaOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaOperStatusTable." INDEX { mscLaIndex } ::= { mscLaOperStatusTable 1 } MscLaOperStatusEntry ::= SEQUENCE { mscLaSnmpOperStatus INTEGER } mscLaSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscLaOperStatusEntry 1 } -- LanApplication/n Framer -- The Framer component is used to link a LanApplication to a Lan -- interface such as Ethernet, Fddi, TokenRing or Ethernet100BaseT. mscLaFramer OBJECT IDENTIFIER ::= { mscLa 2 } mscLaFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscLaFramer components." ::= { mscLaFramer 1 } mscLaFramerRowStatusEntry OBJECT-TYPE SYNTAX MscLaFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscLaFramer component." INDEX { mscLaIndex, mscLaFramerIndex } ::= { mscLaFramerRowStatusTable 1 } MscLaFramerRowStatusEntry ::= SEQUENCE { mscLaFramerRowStatus RowStatus, mscLaFramerComponentName DisplayString, mscLaFramerStorageType StorageType, mscLaFramerIndex NonReplicated } mscLaFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscLaFramer components. These components cannot be added nor deleted." ::= { mscLaFramerRowStatusEntry 1 } mscLaFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscLaFramerRowStatusEntry 2 } mscLaFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscLaFramer tables." ::= { mscLaFramerRowStatusEntry 4 } mscLaFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscLaFramer tables." ::= { mscLaFramerRowStatusEntry 10 } mscLaFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link to the Lan interface such as Ethernet, Fddi, or TokenRing." ::= { mscLaFramer 10 } mscLaFramerProvEntry OBJECT-TYPE SYNTAX MscLaFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaFramerProvTable." INDEX { mscLaIndex, mscLaFramerIndex } ::= { mscLaFramerProvTable 1 } MscLaFramerProvEntry ::= SEQUENCE { mscLaFramerInterfaceName Link } mscLaFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS obsolete DESCRIPTION "This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. This attribute is OBSOLETED and is redefined above as InterfaceName. The new attribute type is a LIST OF LINK with a maximum of two (2) HW components in a list. DESCRIPTION" ::= { mscLaFramerProvEntry 1 } mscLaFramerInterfaceNamesTable OBJECT-TYPE SYNTAX SEQUENCE OF MscLaFramerInterfaceNamesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute associates the LanApplication with a specific Lan interface such as Ethernet, Fddi, or TokenRing. This also defines the LogicalProcessor on which Framer's parent component (as well as Framer itself) will run. Only one (1) LAN interface can be linked to a Framer except for Ethernet100BaseT LAN interface, for which up to two (2) interfaces residing on the same LogicalProcessor can be linked. DESCRIPTION" ::= { mscLaFramer 431 } mscLaFramerInterfaceNamesEntry OBJECT-TYPE SYNTAX MscLaFramerInterfaceNamesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscLaFramerInterfaceNamesTable." INDEX { mscLaIndex, mscLaFramerIndex, mscLaFramerInterfaceNamesValue } ::= { mscLaFramerInterfaceNamesTable 1 } MscLaFramerInterfaceNamesEntry ::= SEQUENCE { mscLaFramerInterfaceNamesValue Link, mscLaFramerInterfaceNamesRowStatus RowStatus } mscLaFramerInterfaceNamesValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mscLaFramerInterfaceNamesTable." ::= { mscLaFramerInterfaceNamesEntry 1 } mscLaFramerInterfaceNamesRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the mscLaFramerInterfaceNamesTable." ::= { mscLaFramerInterfaceNamesEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscLpEnetCustomerIdentifier, -- mscLpFiLtFrmCmpStorageType, -- mscLpEth100TestBitsTx, -- mscLpTrLtFbIpHRowStatus, -- mscLpFiNcUpstreamNeighbor, -- mscLpTrTestBitsTx, -- mscLpEth100TestStorageType, -- mscLpEth100LtFbMacEnetStorageType, -- mscLpEth100LtFbMacTrComponentName, -- mscLpEnetSingleCollisionFrames, -- mscLpTrTestStorageType, -- mscLpEnetLtFbMacTrStorageType, -- mscLpIlsFwdrLtFbAppleHComponentName, -- mscLpTrChipSet, -- mscLpEnetLtFbDataRowStatus, -- mscLpTrLtFbMacEnetStorageType, -- mscLpEnetAlignmentErrors, -- mscLaLinkToProtocolPort, -- mscLpIlsFwdrStorageType, -- mscLpTrRingState, -- mscLpFiLtCntlRowStatus, -- mscLpEnetLtFbAppleHTData, -- mscLpTrLtFrmCpyComponentName, -- mscLpFiVersion, -- mscLpTrTestBitsRx, -- mscLpEth100TestBitsRx, -- mscLpIlsFwdrLtFbIpHComponentName, -- mscLpEnetMacReceiveErrors, -- mscLpEnetLtFbTData, -- mscLpEth100CarrierSenseErrors, -- mscLpFiTestErroredFrmRx, -- mscLpEth100LtTData, -- mscLpIlsFwdrAdminState, -- mscLpEnetLtFbAppleHRowStatus, -- mscLpTrLtTData, -- mscLpEnetLtCntlTData, -- mscLpFiLtPrtCfgTData, -- mscLpTrLtFbLlchStorageType, -- mscLpIlsFwdrLtStorageType, -- mscLpFiNcMacAddress, -- mscLpFiLtFrmCpyRowStatus, -- mscLpFiRingOpCounts, -- mscLpFiTestCauseOfTermination, -- mscLpEnetLtPrtCfgStorageType, -- mscLpEth100LtFbMacTrRowStatus, -- mscLpTrRingRecoverys, -- mscLpFiLtFrmCmpTData, -- mscLpFiLtFbIpxHStorageType, -- mscLpEnetLtFbIpHRowStatus, -- mscLpEth100LtFbFddiMacComponentName, -- mscLaFramerRowStatus, -- mscLpIlsFwdrLtCntlComponentName, -- mscLpIlsFwdrLtFbLlchComponentName, -- mscLpTrLtFbFddiMacComponentName, -- mscLpEth100ActualLineSpeed, -- mscLpTrProductId, -- mscLpEnetLtFbMacTrTData, -- mscLpFiLtComponentName, -- mscLpFiUserData, -- mscLpIlsFwdrTestStorageType, -- mscLpIlsFwdrLtFbMacEnetStorageType, -- mscLpEnetFcsErrors, -- mscLpFiErrorCounts, -- mscLpTrSoftErrors, -- mscLpEnetTestFrmTx, -- mscLpEth100IfAdminStatus, -- mscLpIlsFwdrLtFbMacTrTData, -- mscLaUsageState, -- mscLpFiLtFbFddiMacRowStatus, -- mscLpIlsFwdrLtFrmCpyComponentName, -- mscLpFiPhyLerCutoff, -- mscLpEnetLtCntlRowStatus, -- mscLpFiTestComponentName, -- mscLpFiLtFbMacEnetComponentName, -- mscLpTrLobeWires, -- mscLpIlsFwdrTestBitsRx, -- mscLpFiLtFbTxInfoStorageType, -- mscLpEth100LtFbLlchTData, -- mscLpTrLtFbLlchTData, -- mscLpFiLtFbTxInfoRowStatus, -- mscLpIlsFwdrLtTData, -- mscLpEnetTestErroredFrmRx, -- mscLpTrLtFbAppleHComponentName, -- mscLpIlsFwdrLtFbLlchStorageType, -- mscLpTrFrameCopiedErrors, -- mscLpTrLtFbComponentName, -- mscLpFiNcOldDownstreamNeighbor, -- mscLpFiNeighborNotifyInterval, -- mscLpEnetComponentName, -- mscLpFiEcmState, -- mscLpEnetLtFbMacTrRowStatus, -- mscLpEnetLtFrmCpyRowStatus, -- mscLpFiLtFbIpxHTData, -- mscLpEth100LtPrtCfgStorageType, -- mscLpEnetTestCauseOfTermination, -- mscLpEth100DeferredTransmissions, -- mscLpIlsFwdrLtFbFddiMacComponentName, -- mscLpEnetLtFbIpxHStorageType, -- mscLpFiLtFbLlchComponentName, -- mscLpFiLtFbRowStatus, -- mscLpEnetLtComponentName, -- mscLpFiUsageState, -- mscLpEth100SnmpOperStatus, -- mscLpEth100LtFbIpxHComponentName, -- mscLpTrLtFbMacTrComponentName, -- mscLpTrSnmpOperStatus, -- mscLpFiTestBitsRx, -- mscLpTrIfIndex, -- mscLpFiAcceptBm, -- mscLpFiPhyRowStatus, -- mscLpTrRingStatus, -- mscLpFiPhySignalBitsRcvd, -- mscLpIlsFwdrTestErroredFrmRx, -- mscLpEnetLtFbFddiMacRowStatus, -- mscLpFiLtFbTxInfoTData, -- mscLpIlsFwdrTestFrmTx, -- mscLpEth100LtFrmCmpStorageType, -- mscLpEnetLtPrtCfgTData, -- mscLpEnetTestComponentName, -- mscLpEnetLtFbMacEnetComponentName, -- mscLpFiLtFbMacTrRowStatus, -- mscLpFiTestFrmSize, -- mscLpIlsFwdrLtFbLlchTData, -- mscLpEnetLtFbTxInfoStorageType, -- mscLpEnetSqeTestErrors, -- mscLpIlsFwdrLtFbComponentName, -- mscLpFiTestElapsedTime, -- mscLpEth100ReceivedFramesIntoRouterBr, -- mscLpEth100LtFbDataStorageType, -- mscLpFiTokenNegotiatedTimer, -- mscLpTrLtFbDataStorageType, -- mscLpEnetOperationalState, -- mscLpEth100RowStatus, -- mscLpIlsFwdrLtFbMacEnetComponentName, -- mscLpTrRowStatus, -- mscLpEth100LtPrtCfgComponentName, -- mscLaRowStatus, -- mscLpEnetLtFbIpxHTData, -- mscLpTrLtPrtCfgComponentName, -- mscLaFramerInterfaceNamesRowStatus, -- mscLpTrVendor, -- mscLpEnetUsageState, -- mscLpEnetLtFbLlchComponentName, -- mscLpEnetLtFbRowStatus, -- mscLpEth100LtFbIpHRowStatus, -- mscLpEnetLtFrmCmpTData, -- mscLpTrLtFbAppleHStorageType, -- mscLpTrLtRowStatus, -- mscLpTrTransmitBeacons, -- mscLpIlsFwdrSnmpOperStatus, -- mscLpEth100IfIndex, -- mscLpIlsFwdrIfIndex, -- mscLpEth100LtFbTxInfoComponentName, -- mscLpFiTokenCounts, -- mscLpFiLtPrtCfgRowStatus, -- mscLpTrOperationalState, -- mscLpEth100TestFrmSize, -- mscLpEth100LtCntlRowStatus, -- mscLpEth100LtPrtCfgRowStatus, -- mscLpFiNcDownstreamNeighbor, -- mscLpTrLtFbIpHStorageType, -- mscLpFiLtFrmCmpRowStatus, -- mscLpEth100LtFbDataTData, -- mscLpFiLtFbDataStorageType, -- mscLpIlsFwdrTestType, -- mscLpTrFunctionalAddress, -- mscLpEth100Vendor, -- mscLpIlsFwdrErrorCount, -- mscLpEth100LtFbMacEnetRowStatus, -- mscLpTrTestRowStatus, -- mscLpTrLtFbMacEnetRowStatus, -- mscLpEnetTestFrmSize, -- mscLpTrLtFbDataTData, -- mscLpIlsFwdrLtFbDataStorageType, -- mscLpEnetTestElapsedTime, -- mscLpIlsFwdrComponentName, -- mscLpEth100LtFbIpHStorageType, -- mscLpIlsFwdrRowStatus, -- mscLpIlsFwdrLtPrtCfgComponentName, -- mscLpEth100LtStorageType, -- mscLpFiCopiedCounts, -- mscLpTrMonitorParticipate, -- mscLpEth100MacAddress, -- mscLpTrLtCntlStorageType, -- mscLpFiUpstreamNeighbor, -- mscLpFiTestTimeRemaining, -- mscLpTrMacAddress, -- mscLpEth100LtFbAppleHTData, -- mscLpTrRingSpeed, -- mscLpEth100LtFrmCmpRowStatus, -- mscLpFiTestType, -- mscLpTrLtFbAppleHTData, -- mscLpTrLtFbIpxHComponentName, -- mscLpFiLtFbDataComponentName, -- mscLpTrSingleStation, -- mscLpEth100OperationalState, -- mscLpIlsFwdrLtFrmCmpComponentName, -- mscLpEth100LtFbLlchRowStatus, -- mscLpEth100MultipleCollisionFrames, -- mscLpTrLtFbLlchRowStatus, -- mscLpIlsFwdrLtComponentName, -- mscLpIlsFwdrLtRowStatus, -- mscLpEnetExcessiveCollisions, -- mscLpFiPhySignalState, -- mscLpEth100LtFbIpHTData, -- mscLpEnetLtPrtCfgRowStatus, -- mscLpTrLtFbIpHTData, -- mscLpTrLtFrmCmpComponentName, -- mscLpFiCommentText, -- mscLpFiLtFbIpxHRowStatus, -- mscLpTrFreqErrors, -- mscLpEth100LtFrmCmpTData, -- mscLpIlsFwdrLtFbIpHStorageType, -- mscLpFiLtFbAppleHComponentName, -- mscLpFiLtFbLlchTData, -- mscLpTrLtFbMacEnetTData, -- mscLpFiDupAddressTest, -- mscLpEnetLtFrmCmpRowStatus, -- mscLpIlsFwdrTestRowStatus, -- mscLpIlsFwdrLtFbMacEnetRowStatus, -- mscLpFiStorageType, -- mscLpIlsFwdrLtFbDataTData, -- mscLpTrLtFbTxInfoComponentName, -- mscLpEth100LtFrmCpyComponentName, -- mscLpIlsFwdrLinkToTrafficSourceValue, -- mscLpFiLtFbIpHComponentName, -- mscLpEth100LtCntlTData, -- mscLpEth100TestFrmTx, -- mscLpTrLtCntlTData, -- mscLpTrRemoveRings, -- mscLpFiAdminState, -- mscLpIlsFwdrLtCntlStorageType, -- mscLpTrLtFbFddiMacStorageType, -- mscLpEth100FrameTooLongs, -- mscLpFiApplicationFramerName, -- mscLpFiLtStorageType, -- mscLpFiNotCopiedCounts, -- mscLpIlsFwdrLtFbIpxHComponentName, -- mscLpEnetTestTimeRemaining, -- mscLpEth100MacReceiveErrors, -- mscLpEnetTestType, -- mscLpIlsFwdrLtFbTxInfoRowStatus, -- mscLpFiUseThruBa, -- mscLpEth100LtFbMacEnetComponentName, -- mscLpEth100LtFrmCpyTData, -- mscLpTrLtFrmCpyTData, -- mscLpEnetLtFbDataComponentName, -- mscLpFiLtCntlComponentName, -- mscLpFiLtFbIpHRowStatus, -- mscLpIlsFwdrLtFrmCpyStorageType, -- mscLpFiTestBitsTx, -- mscLpIlsFwdrLtFbIpHTData, -- mscLpTrTestFrmTx, -- mscLpIlsFwdrLtFbLlchRowStatus, -- mscLpEnetLtFrmCmpComponentName, -- mscLpFiTestStorageType, -- mscLpFiLtFbMacEnetStorageType, -- mscLpFiPhyLerEstimate, -- mscLpEnetCommentText, -- mscLpEnetLtFbIpxHRowStatus, -- mscLpEnetLtFbAppleHComponentName, -- mscLpEth100LtFbStorageType, -- mscLpFiPhyLctFailCounts, -- mscLpIlsFwdrTestCauseOfTermination, -- mscLpTrLtFbStorageType, -- mscLpIlsFwdrLtFbTxInfoComponentName, -- mscLpFiAcceptBs, -- mscLpEnetStorageType, -- mscLpEth100LateCollisions, -- mscLpFiPhyPcmState, -- mscLpFiBypassPresent, -- mscLpTrLineErrors, -- mscLpFiPhyLerFlag, -- mscLpTrTestFrmRx, -- mscLpIlsFwdrLtCntlTData, -- mscLpTrLtFbFddiMacTData, -- mscLpEnetLtFbIpHComponentName, -- mscLpTrLtFbLlchComponentName, -- mscLpTrIfAdminStatus, -- mscLpEth100TestDuration, -- mscLpFiLtTData, -- mscLpIlsFwdrLtFbFddiMacStorageType, -- mscLpEth100CustomerIdentifier, -- mscLpTrTestDuration, -- mscLpFiLtFbLlchStorageType, -- mscLpEnetAdminState, -- mscLpTrCustomerIdentifier, -- mscLpEth100OctetsReceivedOk, -- mscLpEnetApplicationFramerName, -- mscLpEnetLtStorageType, -- mscLpEnetLtFbTxInfoRowStatus, -- mscLpEth100ActualDuplexMode, -- mscLpEth100LtFbLlchStorageType, -- mscLpTrLtFbMacTrStorageType, -- mscLpEth100LtPrtCfgTData, -- mscLpFiLtFbAppleHStorageType, -- mscLpEth100LtFbDataRowStatus, -- mscLpIlsFwdrLtFrmCpyTData, -- mscLpTrLtFbDataRowStatus, -- mscLpEth100AlignmentErrors, -- mscLpFiLtFbFddiMacComponentName, -- mscLpFiLtFbMacEnetTData, -- mscLpTrAcErrors, -- mscLpTrRingOpenStatus, -- mscLpEnetLtCntlComponentName, -- mscLpEth100TestFrmRx, -- mscLpEnetTestBitsTx, -- mscLpEnetLtPrtCfgComponentName, -- mscLpFiLtFbFddiMacTData, -- mscLpEnetTestStorageType, -- mscLpEnetLtFbMacEnetStorageType, -- mscLpTrLtFbTData, -- mscLpEth100LtFbAppleHRowStatus, -- mscLpIlsFwdrLtFbStorageType, -- mscLpFiTraceMaxExpirationTimer, -- mscLpTrLtFbAppleHRowStatus, -- mscLaSnmpOperStatus, -- mscLpTrBurstErrors, -- mscLaIfIndex, -- mscLpEth100LtFbDataComponentName, -- mscLpEth100AutoNegotiation, -- mscLpEnetLtFrmCpyComponentName, -- mscLpTrUpStream, -- mscLpIlsFwdrTestFrmRx, -- mscLpEth100UsageState, -- mscLpFiCfState, -- mscLpTrLtPrtCfgStorageType, -- mscLpEnetTestBitsRx, -- mscLpFiOldUpstreamNeighbor, -- mscLpFiPhyLemRejectCounts, -- mscLpEth100LtFbIpHComponentName, -- mscLpIlsFwdrTestDuration, -- mscLpFiLtFbComponentName, -- mscLpEnetLtTData, -- mscLpEth100LtFbMacTrTData, -- mscLpEnetLtFbLlchStorageType, -- mscLpTrLtFbMacTrTData, -- mscLpTrLtFrmCmpStorageType, -- mscLpIlsFwdrLtFbMacTrStorageType, -- mscLpEth100OctetsTransmittedOk, -- mscLpTrSignalLoss, -- mscLpFiPhyComponentName, -- mscLpIlsFwdrLtFbDataRowStatus, -- mscLpFiRmtState, -- mscLpEth100FcsErrors, -- mscLpFiAcceptAm, -- mscLpEnetLtFbFddiMacComponentName, -- mscLpTrReceiveCongestions, -- mscLpEth100LtFbFddiMacTData, -- mscLpEnetLtFbMacEnetTData, -- mscLpEth100UndersizeFrames, -- mscLpTrLtCntlRowStatus, -- mscLpIlsFwdrOperationalState, -- mscLpFiLtFbMacTrComponentName, -- mscLpFiSnmpOperStatus, -- mscLpIlsFwdrLtFbTData, -- mscLpFiIfIndex, -- mscLpFiPhyLinkErrorMonitor, -- mscLpEth100TestErroredFrmRx, -- mscLpIlsFwdrLtFbAppleHRowStatus, -- mscLpTrTestErroredFrmRx, -- mscLpIlsFwdrLtFbDataComponentName, -- mscLpFiIfAdminStatus, -- mscLpEth100ComponentName, -- mscLpEth100SingleCollisionFrames, -- mscLaOperationalState, -- mscLpTrLtPrtCfgTData, -- mscLpEth100LtFrmCpyRowStatus, -- mscLpEth100LtFrmCpyStorageType, -- mscLpTrNcMacAddress, -- mscLpTrLtFrmCpyRowStatus, -- mscLpIlsFwdrLtPrtCfgStorageType, -- mscLpFiPhySignalBitsTxmt, -- mscLpTrHardErrors, -- mscLpEnetLateCollisions, -- mscLpTrTestCauseOfTermination, -- mscLpIlsFwdrLtFbIpHRowStatus, -- mscLpEnetLtFbLlchTData, -- mscLpEth100LtFbIpxHStorageType, -- mscLpIlsFwdrTestBitsTx, -- mscLpTrLtFrmCmpTData, -- mscLpTrLtFbIpxHStorageType, -- mscLpEnetLtFbComponentName, -- mscLpFiLtFbIpHTData, -- mscLpIlsFwdrLtFbIpxHRowStatus, -- mscLpIlsFwdrLtFrmCmpStorageType, -- mscLpEth100LtComponentName, -- mscLpFiRowStatus, -- mscLpEth100TestCauseOfTermination, -- mscLpTrLtComponentName, -- mscLpFiLtPrtCfgComponentName, -- mscLpFiVendor, -- mscLpFiFrameCounts, -- mscLpIlsFwdrProcessedCount, -- mscLpEnetDeferredTransmissions, -- mscLpEth100LtFbFddiMacRowStatus, -- mscLpFiLtFrmCpyComponentName, -- mscLpFiLtFrmCmpComponentName, -- mscLpTrLtFbFddiMacRowStatus, -- mscLpFiTokenMaxTimer, -- mscLpIlsFwdrFramesDiscarded, -- mscLpEth100TestComponentName, -- mscLpFiLtRowStatus, -- mscLpEth100LtFbFddiMacStorageType, -- mscLpFiTokenRequestTimer, -- mscLpEnetLtFbMacTrComponentName, -- mscLpEnetSnmpOperStatus, -- mscLpEth100LtFbTxInfoStorageType, -- mscLpFiOperationalState, -- mscLpEnetIfIndex, -- mscLpEth100SqeTestErrors, -- mscLpTrLtFbTxInfoStorageType, -- mscLpEth100LtFrmCmpComponentName, -- mscLpFiLtFbIpHStorageType, -- mscLpTrAbortTransErrors, -- mscLpIlsFwdrLtFrmCpyRowStatus, -- mscLpEth100LtFbIpxHTData, -- mscLpFiTestRowStatus, -- mscLpFiLtFbMacEnetRowStatus, -- mscLpTrLtFbIpxHTData, -- mscLpEth100StorageType, -- mscLpFiLtFbDataTData, -- mscLpTrLtCntlComponentName, -- mscLpEth100DuplexMode, -- mscLpIlsFwdrLtFrmCmpTData, -- mscLpIlsFwdrLtFbIpxHStorageType, -- mscLaFramerComponentName, -- mscLpFiLostCounts, -- mscLpEth100LtFbLlchComponentName, -- mscLpEth100LtFbRowStatus, -- mscLpTrInternalErrors, -- mscLpEnetLtFbDataStorageType, -- mscLpTrLtFbRowStatus, -- mscLpEnetCarrierSenseErrors, -- mscLpEnetRowStatus, -- mscLaAdminState, -- mscLpTrNodeAddress, -- mscLpFiLtCntlStorageType, -- mscLpTrUsageState, -- mscLpFiMacAddress, -- mscLpEnetMacTransmitErrors, -- mscLpEnetVendor, -- mscLpFiLtFbAppleHTData, -- mscLpFiLtFbIpxHComponentName, -- mscLpEth100LtFbComponentName, -- mscLpIlsFwdrLtFbFddiMacRowStatus, -- mscLpFiLtFbLlchRowStatus, -- mscLpFiAcceptAs, -- mscLpEnetLtFbAppleHStorageType, -- mscLpIlsFwdrTestComponentName, -- mscLpTrLtFbTxInfoTData, -- mscLpFiAcceptBb, -- mscLpEnetLtRowStatus, -- mscLpEth100LtFbTData, -- mscLpIlsFwdrLtFbTxInfoStorageType, -- mscLpFiLtFrmCpyStorageType, -- mscLpTrLtFbMacTrRowStatus, -- mscLpTrTestFrmSize, -- mscLpTrLastTimeBeaconSent, -- mscLpFiPhyLerAlarm, -- mscLpIlsFwdrLtFbAppleHStorageType, -- mscLpEnetLtFbTxInfoTData, -- mscLpTrTestElapsedTime, -- mscLpFiTransmitCounts, -- mscLpEnetLtFbIpHStorageType, -- mscLpIlsFwdrLtFbMacEnetTData, -- mscLpTrLtFbMacEnetComponentName, -- mscLpIlsFwdrFramesReceived, -- mscLpIlsFwdrLtFbIpxHTData, -- mscLpFiRingLatency, -- mscLpEth100LtFbMacEnetTData, -- mscLpFiTvxExpiredCounts, -- mscLpFiLtFbTxInfoComponentName, -- mscLpEnetTestRowStatus, -- mscLpEnetLtFbMacEnetRowStatus, -- mscLpEnetLtFbDataTData, -- mscLpFiAcceptAa, -- mscLpTrLostFrameErrors, -- mscLpFiPhyLemCounts, -- mscLpFiStatusReportPolicy, -- mscLpTrTokenErrors, -- mscLpFiLtCntlTData, -- mscLpEth100LtCntlStorageType, -- mscLpIlsFwdrUsageState, -- mscLpFiLtFbFddiMacStorageType, -- mscLpFiOldDownstreamNeighbor, -- mscLpEth100LtFbTxInfoTData, -- mscLpEnetLtCntlStorageType, -- mscLpTrGroupAddress, -- mscLpEnetMacAddress, -- mscLpTrLtPrtCfgRowStatus, -- mscLaIfAdminStatus, -- mscLpIlsFwdrLtFbFddiMacTData, -- mscLpEnetLtFbIpxHComponentName, -- mscLaCustomerIdentifier, -- mscLpFiPhyNeighborType, -- mscLpEth100ReceivedOctetsIntoRouterBr, -- mscLpIlsFwdrLtFbTxInfoTData, -- mscLpFiLtFrmCpyTData, -- mscLpEnetLtFbLlchRowStatus, -- mscLpIlsFwdrLtFbAppleHTData, -- mscLpEnetMultipleCollisionFrames, -- mscLpTrLtFrmCmpRowStatus, -- mscLpEth100FramesReceivedOk, -- mscLpIlsFwdrLtFbMacTrRowStatus, -- mscLpIlsFwdrTestFrmSize, -- mscLpFiTestFrmTx, -- mscLpFiValidTransmissionTimer, -- mscLpEnetLtFrmCpyStorageType, -- mscLpFiNcOldUpstreamNeighbor, -- mscLpEnetLtFbIpHTData, -- mscLpIlsFwdrTestElapsedTime, -- mscLpTrComponentName, -- mscLpEth100LtRowStatus, -- mscLpEth100TestElapsedTime, -- mscLpFiLtFbStorageType, -- mscLpEth100LtFbAppleHStorageType, -- mscLpEth100TestTimeRemaining, -- mscLpEnetLtFbTxInfoComponentName, -- mscLpEth100LineSpeed, -- mscLaFramerInterfaceNamesValue, -- mscLpTrTestTimeRemaining, -- mscLpEth100TestType, -- mscLpIlsFwdrLtFbMacTrComponentName, -- mscLpFiTestFrmRx, -- mscLpEth100ExcessiveCollisions, -- mscLpTrTestType, -- mscLpIlsFwdrLtPrtCfgTData, -- mscLpFiPhyStorageType, -- mscLpTrLtFbDataComponentName, -- mscLpIlsFwdrIfAdminStatus, -- mscLpEnetLtFrmCmpStorageType, -- mscLpFiTestDuration, -- mscLpFiCustomerIdentifier, -- mscLpEth100TestRowStatus, -- mscLaStorageType, -- mscLpEnetLtFbFddiMacStorageType, -- mscLpIlsFwdrLtFbRowStatus, -- mscLpIlsFwdrLtPrtCfgRowStatus, -- mscLpEnetFrameTooLongs, -- mscLpEth100ApplicationFramerName, -- mscLpFiLtFbMacTrStorageType, -- mscLpEth100CommentText, -- mscLpEth100LtFbIpxHRowStatus, -- mscLpTrCommentText, -- mscLpTrLtFbIpxHRowStatus, -- mscLpEth100LtFbAppleHComponentName, -- mscLpFiLtFbDataRowStatus, -- mscLpIlsFwdrLtFrmCmpRowStatus, -- mscLpEnetLtFrmCpyTData, -- mscLpTrNcUpStream, -- mscLpTrTestComponentName, -- mscLpTrStorageType, -- mscLpFiLateCounts, -- mscLaFramerStorageType, -- mscLpFiLtFbTData, -- mscLpEth100LtFbMacTrStorageType, -- mscLpIlsFwdrLtCntlRowStatus, -- mscLpEth100FramesTransmittedOk, -- mscLpFiFrameErrorFlag, -- mscLpTrLtFbIpHComponentName, -- mscLpFiLtFbAppleHRowStatus, -- mscLpEth100AdminState, -- mscLpFiDownstreamNeighbor, -- mscLpEnetLtFbStorageType, -- mscLpTrAdminState, -- mscLpIlsFwdrTestTimeRemaining, -- mscLpEth100AutoNegStatus, -- mscLpEth100LtFbTxInfoRowStatus, -- mscLpTrApplicationFramerName, -- mscLpTrLtStorageType, -- mscLpTrLtFbTxInfoRowStatus, -- mscLpTrLtFrmCpyStorageType, -- mscLpFiLtPrtCfgStorageType, -- mscLpFiComponentName, -- mscLpEnetTestFrmRx, -- mscLaComponentName, -- mscLpEnetLtFbFddiMacTData, -- mscLpEth100MacTransmitErrors, -- mscLpEnetHeartbeatPacket, -- mscLpEnetIfAdminStatus, -- mscLpEnetTestDuration, -- mscLpEth100LtCntlComponentName, -- mscLpFiLtFbMacTrTData } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." lanDriversGroup OBJECT IDENTIFIER ::= { lanDriversMIB 1 } lanDriversGroupCA OBJECT IDENTIFIER ::= { lanDriversGroup 1 } lanDriversGroupCA02 OBJECT IDENTIFIER ::= { lanDriversGroupCA 3 } lanDriversGroupCA02A OBJECT IDENTIFIER ::= { lanDriversGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 LanDrivers." -- STATUS mandatory -- DESCRIPTION "Carrier Passport LanDrivers MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-LanDriversMIB -- INCLUDES { lanDriversGroupCA02A } -- rfc1643 (Ethernet) -- -- SUPPORTS EtherLike-MIB -- INCLUDES { dot3StatsTable } -- dot3CollTable not supported -- -- -- rfc1512 (FDDI) -- -- SUPPORTS FDDI-SMT73-MIB -- INCLUDES { fddimibSMT, fddimibMAC, fddimibMACCounters, -- fddimibPORT } -- fddimibPATH not supported -- -- variations for fddimibSMT group -- -- VARIATION fddimibSMTStationAction -- ACCESS read-only -- DESCRIPTION "Generation of control signals is not supported -- in this implementation" -- -- -- variations for fddimibMAC group -- -- VARIATION fddimibMACRequestedPaths -- SYNTAX INTEGER (16, 32) -- DESCRIPTION "Only primary-preferred and secondary-preferred -- values supported" -- -- VARIATION fddimibMACFrameErrorThreshold -- SYNTAX INTEGER (0..0) -- DESCRIPTION "Variable thresholds not supported" -- -- VARIATION fddimibMACMAUnitdataEnable -- WRITE-SYNTAX INTEGER { true(1) } -- DESCRIPTION "Changing the value of this flag is not supported -- in this implementation" -- -- VARIATION fddimibMACNotCopiedThreshold -- SYNTAX INTEGER (0..0) -- ACCESS read-only -- DESCRIPTION "Variable thresholds not supported" -- -- -- variations for fddimibPORT group -- -- VARIATION fddimibPORTConnectionPolicies -- WRITE-SYNTAX INTEGER (0) -- DESCRIPTION "Only value supported is 0" -- -- VARIATION fddimibPORTRequestedPaths -- ACCESS read-only -- DESCRIPTION "A constant in this implementation" -- -- VARIATION fddimibPORTAction -- ACCESS read-only -- DESCRIPTION "Generation of control signals is not supported -- in this implementation" -- -- lanDriversCapabilities OBJECT IDENTIFIER ::= { lanDriversMIB 3 } lanDriversCapabilitiesCA OBJECT IDENTIFIER ::= { lanDriversCapabilities 1 } lanDriversCapabilitiesCA02 OBJECT IDENTIFIER ::= { lanDriversCapabilitiesCA 3 } lanDriversCapabilitiesCA02A OBJECT IDENTIFIER ::= { lanDriversCapabilitiesCA02 2 } END