-- MIB file created 20-Jun-2007 17:13:16, by -- SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com CISCO-LWAPP-MESH-STATS-MIB DEFINITIONS ::= BEGIN -- From file: "CISCO-LWAPP-MESH-STATS-MIB.my" -- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T" IMPORTS TruthValue, TimeStamp, TimeInterval FROM SNMPv2-TC-v1 cLApSysMacAddress, cLApName FROM CISCO-LWAPP-AP-MIB ciscoMgmt FROM CISCO-SMI Counter, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; ciscoLwappMeshStatsMIB OBJECT IDENTIFIER ::= { ciscoMgmt 617 } -- MODULE-IDENTITY -- LastUpdated -- 200703120000Z -- OrgName -- Cisco Systems Inc. -- ContactInfo -- Cisco Systems, -- Customer Service -- Postal: 170 West Tasman Drive -- San Jose, CA 95134 -- USA -- Tel: +1 800 553-NETS -- -- Email: cs-wnbu-snmp@cisco.com -- Descr -- This MIB is intended to be implemented on all those -- devices operating as Central Controllers (CC) that -- terminate the Light Weight Access Point Protocol -- (LWAPP) tunnel from Light-weight Access Points. -- -- This MIB represents statistics collected for mesh node -- in Wireless Mesh Network. -- -- The deployment of the controller -- (referred to as CC in the diagram), mesh nodes -- (RAP and MAP) LWAPP APs, client(MS) and NMS appear -- as follows. -- -- +.......+ +.......+ -- + + + + -- + NMS + + NMS + -- + + + + -- +.......+ +.......+ -- . . -- . . . . -- . . . . -- . . . . -- +......+ +......+ +......+ +......+ -- + + + + + + + + -- + CC + + CC + + CC + + CC + -- + + + + + + + + -- +......+ +......+ +......+ +......+ -- .. . . . -- .. . . . -- . . . . . -- . . . . . -- . . . . . -- . . . . . -- +......+ +......+ +......+ +......+ +......+ -- + + + + + + + + + + -- + RAP + + RAP + + RAP + + RAP + + RAP + -- + + + + + + + + + + -- +......+ +......+ +......+ +......+ +......+ -- . . . . . -- . . . . . -- . . . . . -- . . . . . -- . . . . . -- +......+ +......+ +......+ +......+ +......+ -- + + + + + + + + + + -- + MAP + + MS + + MAP + + MAP + + MAP + -- + + + + + + + + + + -- +......+ +......+ +......+ +......+ +......+ -- . . .. . -- . . . .. . -- . . . .. . -- . . . . . -- +......+ +......+ +......+ +......+. +......+ -- + + + + + + + + + + -- + MAP + + MAP + + MAP + + MAP + + MS + -- + + + + + + + + + + -- +......+ +......+ +......+ +......+ +......+ -- -- -- -- -- The LWAPP tunnel exists between the controller and -- the APs. The MNs communicate with the APs through -- the protocol defined by the 802.11 standard. -- -- LWAPP APs, upon bootup, discover and join one of the -- controllers and the controller pushes the -- configuration, that includes the WLAN parameters to -- the LWAPP APs. -- The APs encapsulate all the 802.11 frames from -- wireless clients inside LWAPP frames and forward -- the LWAPP frames to the controller. -- -- GLOSSARY -- -- Access Point ( AP ) -- -- An entity that contains an 802.11 medium access -- control ( MAC ) and physical layer ( PHY ) interface -- and provides access to the distribution services via -- the wireless medium for associated clients. -- LWAPP APs encapsulate all the 802.11 frames in -- LWAPP frames and sends them to the controller to which -- it is logically connected. -- -- Central Controller ( CC ) -- -- The central entity that terminates the LWAPP protocol -- tunnel from the LWAPP APs. Throughout this MIB, -- this entity is also referred to as 'controller'. -- -- Mobile Station ( MS ) -- -- A roaming 802.11 wireless device in a wireless -- network associated with an access point. Mobile Station -- and client are used interchangeably. -- -- Network Management System ( NMS ) -- -- The station from which the administrator manages the -- wired and wireless networks. -- -- Mesh Node -- -- A mesh node is defined as a physical or logical entity -- in the mesh network participating in forming the mesh -- backhaul. RAP and MAP are two types of mesh nodes -- supported in mesh network. -- -- Root AP (RAP) -- -- The AP forming the bridge between a wired and a mesh -- network with an Ethernet interface to the wired -- network and a 802.11 radio interface to the mesh -- network -- -- Mesh AP (MAP). -- -- The AP extending wireless coverage similar to a -- repeater in a mesh network and consists of a 802.11 -- uplink and a 802.11 downlink. On a single-radio -- backhaul, both uplink and downlink exist on the same -- radio and are logical links only. On a multi-radio -- backhaul, they may exist on different radios. -- -- Mesh Network -- -- Network starting with the wireless backhaul downlink -- of the RAP and all the entities below except any -- attached network to the Ethernet link of MAPs. A mesh -- network below a single RAP is also referred to as a -- 'Mesh Sector'.A mesh network consists of mesh nodes. -- A single mesh network is always augmented to a single -- wired network. -- -- Mesh Link -- -- A logical 802.11 link between two mesh nodes. A single -- link is point-to-point. All point-to-multipoint links -- are considered as multiple mesh links. Often referred -- to as mesh backhaul link. -- -- Mesh Backhaul -- -- A Mesh backhaul consists of mesh nodes and mesh links -- terminating at a RAP. This necessarily creates a one- -- to-one relationship between a 'mesh network', 'mesh -- sector' and a 'mesh backhaul' where these terms can be -- used interchangeably. -- -- SNR -- -- Signal to Noise ratio on the 802.11 radio. -- -- Bridged network -- -- The bridged network is defined as the network(s) -- attached to the Ethernet port of any MAP. There can be -- multiple such networks attached to a single mesh -- network. -- -- Mesh Node Roaming -- -- A mesh node may change its parent mesh node naturally -- when the RF/network condition changes. Child Mesh node -- will re-associate and re-authenticate to new parent -- mesh node. Mesh Security supports two types of mesh -- node roaming. -- Intra-controller - LWAPP session is not lost. -- Inter-controller - LWAPP session is lost. -- -- -- REFERENCE -- -- [1] Wireless LAN Medium Access Control ( MAC ) and -- Physical Layer ( PHY ) Specifications. -- -- [2] Draft-obara-capwap-lwapp-00.txt, IETF Light -- Weight Access Point Protocol -- RevDate -- 200703120000Z -- RevDescr -- Initial version of this MIB module. ciscoLwappMeshStatsMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIB 0 } ciscoLwappMeshStatsMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIB 1 } ciscoLwappMeshStatsMIBConfigObjects OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIB 2 } ciscoLwappMeshStatsMIBConform OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIB 3 } ciscoLwappMeshNodeStats OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBObjects 1 } ciscoLwappMeshStatsMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBConform 1 } ciscoLwappMeshStatsMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBConform 2 } clMeshNodeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ClMeshNodeStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table represents information about packets that were transmitted to or received from a mesh node. An entry in this table gets added when a mesh node associates to the controller and entry gets removed when mesh node disassociates from the controller." ::= { ciscoLwappMeshNodeStats 1 } clMeshNodeStatsEntry OBJECT-TYPE SYNTAX ClMeshNodeStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An (conceptual) entry in this table represents statistics for a mesh node." INDEX { cLApSysMacAddress } ::= { clMeshNodeStatsTable 1 } ClMeshNodeStatsEntry ::= SEQUENCE { clMeshNodeMalformedNeighPkts Counter, clMeshNodePoorNeighSnrPkts Counter, clMeshNodeExcludedPkts Counter, clMeshNodeRxNeighReq Counter, clMeshNodeRxNeighRsp Counter, clMeshNodeTxNeighReq Counter, clMeshNodeTxNeighRsp Counter, clMeshNodeParentChanges Counter } clMeshNodeMalformedNeighPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of packets received from neighbor mesh nodes which could not be decoded." ::= { clMeshNodeStatsEntry 1 } clMeshNodePoorNeighSnrPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of packets received from neighbor mesh nodes which were below SNR threshold value." ::= { clMeshNodeStatsEntry 2 } clMeshNodeExcludedPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of packets received from excluded neighbor mesh nodes." ::= { clMeshNodeStatsEntry 3 } clMeshNodeRxNeighReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of request received from neighbor mesh node APs. Requests can be either broadcast or unicast from neighbor mesh nodes." ::= { clMeshNodeStatsEntry 4 } clMeshNodeRxNeighRsp OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of response received from neighbor mesh node APs." ::= { clMeshNodeStatsEntry 5 } clMeshNodeTxNeighReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of request sent to neighbor mesh node APs. Requests can be broadcast or unicast to neighbor mesh node." ::= { clMeshNodeStatsEntry 6 } clMeshNodeTxNeighRsp OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of response sent to neighbor mesh node APs." ::= { clMeshNodeStatsEntry 7 } clMeshNodeParentChanges OBJECT-TYPE SYNTAX Counter -- Units -- parent-switches ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of times this mesh node has changed its parent." ::= { clMeshNodeStatsEntry 8 } clMeshNodePktQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ClMeshNodePktQueueStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table represents information about different packet queues of a mesh node. Queues are maintained in a mesh node based on quality of service and packets wait for its turn in queue before it is sent to network. An (conceptual) entry in this table is created when a mesh node associates with controller and start sending packets to neighbor mesh node or controller Entries are removed when the mesh node disassociates from controller." ::= { ciscoLwappMeshNodeStats 2 } clMeshNodePktQueueStatsEntry OBJECT-TYPE SYNTAX ClMeshNodePktQueueStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table represents average queue size and peak packets queue reached." INDEX { cLApSysMacAddress, clMeshNodePktQueueIndex } ::= { clMeshNodePktQueueStatsTable 1 } ClMeshNodePktQueueStatsEntry ::= SEQUENCE { clMeshNodePktQueueIndex INTEGER, clMeshNodePktQueueAvg Gauge, clMeshNodePktQueuePeak Gauge, clMeshNodePktQueuePktsDropped Counter, clMeshNodePktQueueTimeStamp TimeStamp, clMeshNodePktQueueSize Gauge } clMeshNodePktQueueIndex OBJECT-TYPE SYNTAX INTEGER { silver(1), gold(2), platinum(3), bronze(4), management(5) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This object represents different types of queues in a mesh node. silver - queue for Best Effort packets. gold - queue for Video Application. platinum - queue for Voice Application. bronze - queue for Background. management - queue for management frames." ::= { clMeshNodePktQueueStatsEntry 1 } clMeshNodePktQueueAvg OBJECT-TYPE SYNTAX Gauge -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents average number of packets waiting in the queue during interval defined by object 'clMeshNodeStatsTimeInterval'." ::= { clMeshNodePktQueueStatsEntry 2 } clMeshNodePktQueuePeak OBJECT-TYPE SYNTAX Gauge -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents peak number of packets waiting in the queue during interval defined by object 'clMeshNodeStatsTimeInterval'." ::= { clMeshNodePktQueueStatsEntry 3 } clMeshNodePktQueuePktsDropped OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents total number of packets dropped due to queue overflow." ::= { clMeshNodePktQueueStatsEntry 4 } clMeshNodePktQueueTimeStamp OBJECT-TYPE SYNTAX TimeStamp -- Rsyntax TimeTicks -- Units -- seconds ACCESS read-only STATUS mandatory DESCRIPTION "This object represents when the queue statistics was last collected. This value is represented as a instance of sysUp time." ::= { clMeshNodePktQueueStatsEntry 5 } clMeshNodePktQueueSize OBJECT-TYPE SYNTAX Gauge -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object represents max number of packets a queue can hold." ::= { clMeshNodePktQueueStatsEntry 6 } clMeshNodeSecStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ClMeshNodeSecStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table represents information about packets transmitted to or received from a mesh node during association or authentication of a child mesh node to parent mesh node. An (conceptual) entry in this table is created when a mesh node associates or authenticates with a parent mesh node. Entries are removed when the mesh node disassociates from controller." ::= { ciscoLwappMeshNodeStats 3 } clMeshNodeSecStatsEntry OBJECT-TYPE SYNTAX ClMeshNodeSecStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each (conceptual) entry in this table represents count of security packets a mesh node exchange with its parent mesh node." INDEX { cLApSysMacAddress } ::= { clMeshNodeSecStatsTable 1 } ClMeshNodeSecStatsEntry ::= SEQUENCE { clMeshNodeSecTxPkts Counter, clMeshNodeSecRxPkts Counter, clMeshNodeAssocReqFailures Counter, clMeshNodeAssocReqTimeouts Counter, clMeshNodeAssocReqSuccess Counter, clMeshNodeAuthReqFailures Counter, clMeshNodeAuthReqTimeouts Counter, clMeshNodeAuthReqSuccess Counter, clMeshNodeReassocReqFailures Counter, clMeshNodeReassocReqTimeouts Counter, clMeshNodeReassocReqSuccess Counter, clMeshNodeReauthReqFailures Counter, clMeshNodeReauthReqTimeouts Counter, clMeshNodeReauthReqSuccess Counter, clMeshNodeUnknownAssocReq Counter, clMeshNodeInvalidAssocReq Counter, clMeshNodeUnknownReauthReq Counter, clMeshNodeInvalidReauthReq Counter, clMeshNodeUnknownReassocReq Counter, clMeshNodeInvalidReassocReq Counter } clMeshNodeSecTxPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of packets transmitted by this mesh node during security negotiations." ::= { clMeshNodeSecStatsEntry 1 } clMeshNodeSecRxPkts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of packets received by this mesh node during security negotiations." ::= { clMeshNodeSecStatsEntry 2 } clMeshNodeAssocReqFailures OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of association request sent by this node as a child mesh node to a parent mesh node, that resulted in a failure." ::= { clMeshNodeSecStatsEntry 3 } clMeshNodeAssocReqTimeouts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of association request sent by this node, as a child mesh node to a parent mesh node, that timed out." ::= { clMeshNodeSecStatsEntry 4 } clMeshNodeAssocReqSuccess OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of association request sent by this node, as a child mesh node to a parent mesh node, that completed." ::= { clMeshNodeSecStatsEntry 5 } clMeshNodeAuthReqFailures OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of authenticaton request sent by this node, as a child mesh node to a parent mesh node, that failed." ::= { clMeshNodeSecStatsEntry 6 } clMeshNodeAuthReqTimeouts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of authentication request sent by this node, as a child mesh node to a parent mesh node, that timed out." ::= { clMeshNodeSecStatsEntry 7 } clMeshNodeAuthReqSuccess OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of authentication request sent by this node, as a child mesh node to a parent mesh node, that completed." ::= { clMeshNodeSecStatsEntry 8 } clMeshNodeReassocReqFailures OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that failed." ::= { clMeshNodeSecStatsEntry 9 } clMeshNodeReassocReqTimeouts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that timed out." ::= { clMeshNodeSecStatsEntry 10 } clMeshNodeReassocReqSuccess OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that completed." ::= { clMeshNodeSecStatsEntry 11 } clMeshNodeReauthReqFailures OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that failed." ::= { clMeshNodeSecStatsEntry 12 } clMeshNodeReauthReqTimeouts OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that timed out." ::= { clMeshNodeSecStatsEntry 13 } clMeshNodeReauthReqSuccess OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that completed." ::= { clMeshNodeSecStatsEntry 14 } clMeshNodeUnknownAssocReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of unknown association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor." ::= { clMeshNodeSecStatsEntry 15 } clMeshNodeInvalidAssocReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of invalid association request that were received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be associated." ::= { clMeshNodeSecStatsEntry 16 } clMeshNodeUnknownReauthReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of unknown re-authentication request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor." ::= { clMeshNodeSecStatsEntry 17 } clMeshNodeInvalidReauthReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of invalid re-authentication request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be re-authenticated." ::= { clMeshNodeSecStatsEntry 18 } clMeshNodeUnknownReassocReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of unknown re-association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor." ::= { clMeshNodeSecStatsEntry 19 } clMeshNodeInvalidReassocReq OBJECT-TYPE SYNTAX Counter -- Units -- packets ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates total number of invalid re-association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be re-associated." ::= { clMeshNodeSecStatsEntry 20 } clMeshNodeQueueOverflowNotifEnabled OBJECT-TYPE SYNTAX TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The object to control the generation of 'ciscoLwappMeshQueueOverflow' notification. A value of 'true' indicates that the agent generates 'ciscoLwappMeshQueueOverflow' notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappMeshQueueOverflow notification." DEFVAL { true } ::= { ciscoLwappMeshStatsMIBConfigObjects 1 } clMeshNodeStatsTimeInterval OBJECT-TYPE SYNTAX TimeInterval(18000..90000) -- Rsyntax INTEGER(18000..90000) -- Units -- hundredths-seconds ACCESS read-write STATUS mandatory DESCRIPTION "The object represents the time interval after which statistics are populated for each mesh node." DEFVAL { 18000 } ::= { ciscoLwappMeshStatsMIBConfigObjects 2 } ciscoLwappMeshQueueOverflow TRAP-TYPE -- Reverse mappable trap ENTERPRISE ciscoLwappMeshStatsMIB VARIABLES { cLApName, clMeshNodePktQueuePeak, clMeshNodePktQueuePktsDropped } -- Status -- mandatory DESCRIPTION "This notification is sent by the agent when a queue overflows and as a result packets get dropped. After each time interval, defined by object 'clMeshNodeStatsTimeInterval', mesh node sends its queue statistics to the controller which also includes cumulative number of packets dropped, defined by object 'clMeshNodePktQueuePktsDropped'. If the packets dropped is higher than the previous time notification generated then this notification is raised.." ::= 1 ciscoLwappMeshNodeStatsGroup OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBGroups 1 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This collection of objects represent packets -- that were transmitted or received between neighbor -- mesh nodes. -- objects -- clMeshNodeMalformedNeighPkts, clMeshNodePoorNeighSnrPkts, -- clMeshNodeExcludedPkts, clMeshNodeRxNeighReq, -- clMeshNodeRxNeighRsp, clMeshNodeTxNeighReq, -- clMeshNodeTxNeighRsp, clMeshNodeParentChanges ciscoLwappMeshNodePktQueueStatsGroup OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBGroups 2 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This collection of objects represent packets -- is different types of queues to be transmitted to -- neighbor meshnode or to controller. -- objects -- clMeshNodePktQueueAvg, clMeshNodePktQueuePeak, -- clMeshNodePktQueuePktsDropped, clMeshNodePktQueueTimeStamp, -- clMeshNodePktQueueSize ciscoLwappMeshNodeSecStatsGroup OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBGroups 3 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This collection of objects represent packets -- that were transmitted or received by a child mesh node -- or a parent mesh node during security negotiations. -- objects -- clMeshNodeSecTxPkts, clMeshNodeSecRxPkts, -- clMeshNodeAssocReqFailures, clMeshNodeAssocReqTimeouts, -- clMeshNodeAssocReqSuccess, clMeshNodeAuthReqFailures, -- clMeshNodeAuthReqTimeouts, clMeshNodeAuthReqSuccess, -- clMeshNodeReassocReqFailures, clMeshNodeReassocReqTimeouts, -- clMeshNodeReassocReqSuccess, clMeshNodeReauthReqFailures, -- clMeshNodeReauthReqTimeouts, clMeshNodeReauthReqSuccess, -- clMeshNodeUnknownAssocReq, clMeshNodeInvalidAssocReq, -- clMeshNodeUnknownReauthReq, clMeshNodeInvalidReauthReq, -- clMeshNodeUnknownReassocReq, clMeshNodeInvalidReassocReq ciscoLwappMeshStatsConfigObjsGroup OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBGroups 4 } -- OBJECT-GROUP -- Status -- mandatory -- Descr -- This collection of objects represent configuration -- objects for statistics of mesh network. -- objects -- clMeshNodeQueueOverflowNotifEnabled, -- clMeshNodeStatsTimeInterval ciscoLwappMeshStatsNotifsGroup OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBGroups 5 } -- NOTIFICATION-GROUP -- Status -- mandatory -- Descr -- This collection of objects represent the mesh network -- statistics related notifications sent by the agent to a -- network management station. -- notifications -- ciscoLwappMeshQueueOverflow ciscoLwappMeshStatsMIBCompliance OBJECT IDENTIFIER ::= { ciscoLwappMeshStatsMIBCompliances 1 } -- MODULE-COMPLIANCE -- Status -- mandatory -- Descr -- The compliance statement for the SNMP entities that -- implement the ciscoLwappMeshStatsMIB module. -- Module -- >>current<< -- MandGroup -- ciscoLwappMeshNodeStatsGroup -- MandGroup -- ciscoLwappMeshNodePktQueueStatsGroup -- MandGroup -- ciscoLwappMeshNodeSecStatsGroup -- MandGroup -- ciscoLwappMeshStatsConfigObjsGroup -- MandGroup -- ciscoLwappMeshStatsNotifsGroup END