--
-- IRT4570MDC-MIB.my (MIB for MDC-4570)
-- v2.0	06/10/2009
--			- MIB regenerated for MIB Browser compataibility.
-- v1.0	08/01/2009
-- 			- Original Issue.
--

--  
-- 

	IRT4570MDC-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			irtProducts, irt			
				FROM IRT-MIB			
			OBJECT-TYPE			
				FROM RFC-1212			
			TRAP-TYPE			
				FROM RFC-1215			
			sysObjectID, sysName, DisplayString			
				FROM RFC1213-MIB;
	
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.16557.3.50
		irt4570MDC OBJECT IDENTIFIER ::= { irtProducts 50 }

		
		-- 1.3.6.1.4.1.16557.3.50.1
		alarms OBJECT-TYPE
			SYNTAX INTEGER
				{
				noAlarms(1),
				urgentAlarms(2),
				nonUrgentAlarms(3),
				urgAndNonUrgentAlarms(4)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The current state of the Urgent and Non Urgent alarms."
			::= { irt4570MDC 1 }

		
		-- 1.3.6.1.4.1.16557.3.50.2
		switchStatus OBJECT IDENTIFIER ::= { irt4570MDC 2 }

		
		-- 1.3.6.1.4.1.16557.3.50.2.1
		scrambleSwitch OBJECT-TYPE
			SYNTAX INTEGER
				{
				none(1),
				scramble(2),
				descramble(3)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the front panel switch setting."
			::= { switchStatus 1 }

		
		-- 1.3.6.1.4.1.16557.3.50.2.2
		reedSolomonSwitch OBJECT-TYPE
			SYNTAX INTEGER
				{
				none(1),
				rsencode(2),
				rsdecode(3)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the front panel switch setting."
			::= { switchStatus 2 }

		
		-- 1.3.6.1.4.1.16557.3.50.2.3
		interleaverSwitch OBJECT-TYPE
			SYNTAX INTEGER
				{
				none(1),
				interleave(2),
				deinterleave(3)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the front panel switch setting."
			::= { switchStatus 3 }

		
		-- 1.3.6.1.4.1.16557.3.50.2.4
		pkt188to204Switch OBJECT-TYPE
			SYNTAX INTEGER
				{
				off(1),
				on(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the DIP switch setting."
			::= { switchStatus 4 }

		
		-- 1.3.6.1.4.1.16557.3.50.2.5
		pkt204to188Switch OBJECT-TYPE
			SYNTAX INTEGER
				{
				off(1),
				on(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the DIP switch setting."
			::= { switchStatus 5 }

		
		-- 1.3.6.1.4.1.16557.3.50.3
		inputStatus OBJECT IDENTIFIER ::= { irt4570MDC 3 }

		
		-- 1.3.6.1.4.1.16557.3.50.3.1
		inputPresent OBJECT-TYPE
			SYNTAX INTEGER
				{
				notPresent(1),
				present(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that a signal is present."
			::= { inputStatus 1 }

		
		-- 1.3.6.1.4.1.16557.3.50.3.2
		inputPktSize OBJECT-TYPE
			SYNTAX INTEGER
				{
				bytes188(1),
				bytes204(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication of the packet size."
			::= { inputStatus 2 }

		
		-- 1.3.6.1.4.1.16557.3.50.3.3
		inputDataRate OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The approximate input data rate."
			::= { inputStatus 3 }

		
		-- 1.3.6.1.4.1.16557.3.50.3.4
		inputSCRpres OBJECT-TYPE
			SYNTAX INTEGER
				{
				notPresent(1),
				present(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that the input has energy dispersal scrambling added."
			::= { inputStatus 4 }

		
		-- 1.3.6.1.4.1.16557.3.50.3.5
		inputRSpres OBJECT-TYPE
			SYNTAX INTEGER
				{
				notPresent(1),
				present(2)
				}
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"An indication that the input has RS bytes."
			::= { inputStatus 5 }

		
		-- 1.3.6.1.4.1.16557.3.50.4
		rsErrorMonitor OBJECT IDENTIFIER ::= { irt4570MDC 4 }

		
		-- 1.3.6.1.4.1.16557.3.50.4.1
		rsErrMonActive OBJECT-TYPE
			SYNTAX INTEGER
				{
				notEnabled(1),
				enabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"Enables RS error monitoring. A set with the value 2
				sent to this OID will reset all error counters to 0. Note that 
				this requires the correct switch and input signal status to 
				operate correctly."
			::= { rsErrorMonitor 1 }

		
		-- 1.3.6.1.4.1.16557.3.50.4.2
		rsCorrectibleErr OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The acccumulated number of correctible RS errors."
			::= { rsErrorMonitor 2 }

		
		-- 1.3.6.1.4.1.16557.3.50.4.3
		rsUncorrectibleErr OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The acccumulated number of uncorrectible RS errors."
			::= { rsErrorMonitor 3 }

		
		-- 1.3.6.1.4.1.16557.3.50.4.4
		rsSyncLossPeriod OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The acccumulated number of sync loss periods."
			::= { rsErrorMonitor 4 }

		
		-- 1.3.6.1.4.1.16557.3.50.5
		inputAlias OBJECT-TYPE
			SYNTAX DisplayString
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"A 15 byte maximum Alias for the Input."
			::= { irt4570MDC 5 }

		
		-- 1.3.6.1.4.1.16557.3.50.6
		fpgaVersion OBJECT-TYPE
			SYNTAX DisplayString
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The firmware version of the main FPGA in the format
				'x.y' where x is the major revision number and y is
				the minor revision number."
			::= { irt4570MDC 6 }

		
		-- 1.3.6.1.4.1.16557.3.50.7
		softwareVersion OBJECT-TYPE
			SYNTAX DisplayString
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
				"The software version of the main FPGA in the format
				'x.y' where x is the major revision number and y is the 
				minor revision number."
			::= { irt4570MDC 7 }

		
		-- 1.3.6.1.4.1.16557.3.50.8
		reset OBJECT-TYPE
			SYNTAX INTEGER
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"A set with the value 2 sent to this OID will cause 
				a system reset to occur. When queried returns a 1."
			::= { irt4570MDC 8 }

		
		-- 1.3.6.1.4.1.16557.3.50.9
		inputPresTrapEnable OBJECT-TYPE
			SYNTAX INTEGER
				{
				notEnabled(1),
				enabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, traps will be sent when the input is first present or first lost."
			::= { irt4570MDC 9 }

		
		-- 1.3.6.1.4.1.16557.3.50.10
		rsUncorrectibleErrorTrapEnable OBJECT-TYPE
			SYNTAX INTEGER
				{
				notEnabled(1),
				enabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, a trap will be sent when an RS uncorrectible errored period occurs."
			::= { irt4570MDC 10 }

		
		-- 1.3.6.1.4.1.16557.3.50.11
		rsCorrectibleErrorTrapEnable OBJECT-TYPE
			SYNTAX INTEGER
				{
				notEnabled(1),
				enabled(2)
				}
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
				"If enabled, a trap will be sent when an RS correctible errored period occurs."
			::= { irt4570MDC 11 }

		
	
--
-- Trap definitions
--
	
		irt4570MDCinputStatusTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, inputPresent }
			DESCRIPTION 
				"If enabled, a trap will be sent when the input is first present or first lost."
			::=  50

		irt4570MDCrsUncorrectibleErrorTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, rsErrMonActive, rsUncorrectibleErr }
			DESCRIPTION 
				"If enabled, a trap will be sent when an RS uncorrectible errored period occurs."
			::=  178

		irt4570MDCrsCorrectibleErrorTrap TRAP-TYPE 
			ENTERPRISE irt
			VARIABLES { sysObjectID, sysName, rsErrMonActive, rsCorrectibleErr }
			DESCRIPTION 
				"If enabled, a trap will be sent when an RS correctible errored period occurs."
			::=  306

	
	END

--
-- IRT4570MDC-MIB.my
--