--============================================================================= -- -- Lucent Technologies - Wireless Communications and Networking Division -- 260 14th Street NW Suite 400 -- Atlanta, GA 30318 -- USA -- Tel: +1.404.898.1764 -- Fax: +1.404.898.1776 -- Email: dborges@lucent.com -- --============================================================================= -- -- Access Server 2000 Management Information Base -- --============================================================================= -- -- FILENAME: as2000_yymmdd.mib (yy = year, mm = month, dd = day) -- -- DESIGNER: Daniel R. Borges -- -- TITLE: Access Server 2000 Management Information Base -- -- USED IN: Access Server 2000 Release 2.0 for SNMP based Management. -- --============================================================================= -- -- Document Version Info -- --============================================================================= -- Version Date Author Description --============================================================================= -- 1.0 Lucent Original Creation. --============================================================================= -- 2.0 6th April Future Software Added MIB objects for IAPP and IPX, -- 2000 CLI status,Console Port. --============================================================================= -- 2.1 19th April Future Software Wavelan card details are put in a -- 2000 table with ifIndex as index column, -- to support two wavelan cards. -- Serial and Telnet parameters added. -- Link Test parameters added to wavelan -- interface table. Password for serial -- console is removed as per Lucent. -- NOTE: Telnet parameters will be -- removed if their is no support -- for telnet MIB in VxWorks. --============================================================================= -- 3.0 18th May Future Software psIappAnnRespTime made as read-only. -- 2000 Wavelan scalar objects are retained -- as it is in PL1.0. -- AS2000 BASE OID given as orinoco.3 -- as per the conf call with LUCENT. -- psIpxEthernetEncapsulationFormat -- object added to IPX group. -- MIB baselined after these changes. --============================================================================= -- 3.1 7 Sept DRB, Lucent Modifications to IAPP Parameters. -- 2000 The values for the following IAPP -- parameters have been modified: -- psIappAnnInterval -- psIappAnnRespTime -- psIappHandOvrTimeOut -- psIappMaxHandOvrRetries --============================================================================= -- 3.2 8 Sept Gopal, FS Correction made to IAPP Parameter -- 2000 values. --============================================================================= -- 3.3 11 Sept DRB, Lucent Added TRAPs that are present in -- 2000 AS-2000 R1.0 (publan.mib) and were -- not present in this mib for AS-2000 -- R2.0. In addition, PPP Idle Session -- Timeout was included. --============================================================================= -- 3.4 27 Sept Ganesh, FS Added new objects from the 1.51.03's -- 2000 publan.mib. The objects are -- psContactEmail & psBootROMVersion. -- -- 27 Sept Ramkumar, FS Added psPPPIPRangeTableComment in the -- 2000 Table psPPPIPRangeTable. --============================================================================= -- 3.5 16 Oct DRB, Lucent Clean-up of unnecessary objects. -- 2000 --============================================================================= -- 3.6 30 Oct DRB, Lucent Traps were added in order to inform -- 2000 what task has suspended --============================================================================= -- 3.7 1 Nov DRB, Lucent The following table indexes where -- 2000 changed from non-accessible to -- read-only for CLI access: -- psSNMPManagerIndex -- psPPPMACIPTableIndex -- psPPPIPRangeTableIndex -- radiusServerIndex --============================================================================= -- 3.8 6 Nov G.Ramkumar, FS Changed Mib variables from dhcp_relay -- 2000 to dhcp-relay. Added the value -- delete(3) to the Mib Variable -- radiusServerEnabled. Renamed the Mib -- variables psBootROMVersion and radius -- ClientMib. Added -- psTestSNMPReadWritePassword required -- for verification of the password. -- Removed multiple occurances of -- AccessServerTaskSuspended. Added -- AccessServerSuspendedTaskName. --============================================================================= -- 3.9 10 Nov DRB, Lucent Added pscdTFTPFileType to agent -- 2000 group. Change description for -- accessServer traps removing reference -- of wavelan and pubstation. --============================================================================= -- 4.0 13 Nov DRB, Lucent Renamed psBootROMVersion to -- 2000 psBSPBootloaderVersion. --============================================================================= -- 4.1 27 Nov DRB, Lucent Changed psIPAddressType to read-write -- 2000 and values to static and dynamic. --============================================================================= -- 4.2 5 Dec DRB, Lucent Added AS Client IPX Table and -- 2000 device serial number. --============================================================================= -- 4.3 6 Dec DRB, Lucent Changed the bsp-bootloader file type -- 2000 to bspbl in order for it to be -- displayed correctly in the -- AS Manager. Changed the name from -- pscdTFTPFiletype to psTFTPFileType -- for consistency. --============================================================================= -- 4.4 19 Dec G.Ramkumar Changed the AS Client IPX table -- 2000 FS parameter names. This is to ensure -- that the variables displayed -- correctly in the may not only -- restrict to IPX Clients. --============================================================================= -- 4.5 19 Dec C S Tewari Changed the comment for -- 2000 FS psIPAddressType. --============================================================================= -- 4.6 25 Dec T.S. Shankar Changed type of IPXNetworkNUmber -- 2000 FS paramter from Ipaddress type to -- OCTET STRING for MR LUCin01666 --============================================================================= -- 4.7 21 Dec DRB, Lucent Added Link Test group for remote link -- 2000 test function. -- Suresh Included Remote Link Test Part -- in the Original MIB for Development -- and Testing --============================================================================= -- 4.8 10 Jan Suresh T Added oriLinkTestInterface and -- 2001 FS oriLinkTestRadioType in the Link Test -- Group. --============================================================================= -- 4.9 25 Jan DRB, Lucent Added IAPP table in order to monitor -- 2001 IAPP enabled Access Servers in the -- same subnet. Addressed in MR 1658. --============================================================================= -- 5.0 29 Jan G.Ramkumar Modified Index Name of psWlanIfTable -- 2001 FS as change required by CLI. -- Added new object in pliWlanIfTable -- for MR LUCin01745. -- Added traps for Radius Authentication -- not configured & Accounting not -- configured. -- Modified the Status integer field in -- psPPPSessionIdleTimeOut for -- MRLUCin01706. Deleted Object -- psPPPMaxNoOfUsers as it added as a -- part of pliWlanIfTable. -- ServerType in RadiusTable made as -- read-only as the server type is -- determined by the Index. --============================================================================= -- 5.1 1 Feb G.Ramkumar Reverted back the MaxNoOfUsers Object -- 2001 FS to PPPSetup Group and removed the -- MaxNoOfUsers object from the Physical -- Interface Table. --============================================================================= -- 5.2 23 Feb DRB, Lucent Add traps to indicate that BootP -- 2001 has failed and/or DHCP has failed. --============================================================================= -- -- COMPILER: smicng MIB compiler -- --============================================================================= --============================================================================= -- Copyright (C) 2000 Lucent Technologies -- Lucent - PROPRIETARY -- Disclosure to third parties or reproduction in any from -- whatsoever, without prior written consent, is strictly forbiden. --============================================================================= --============================================================================= -- Includes --============================================================================= --#condInclude "rfc1155.smi" --#condInclude "rfc1212.smi" --#condInclude "rfc1213.inc" --#condInclude "rfc1215.smi" --============================================================================= -- Access Server 2000 MIBs Begin --============================================================================= AS-2000 DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- -- SIZE (0..255) PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. --============================================================================= -- Defining the MIB OID tree for AS-2000 --============================================================================= lucent OBJECT IDENTIFIER ::= { enterprises 1751 } mibs OBJECT IDENTIFIER ::= { lucent 2 } orinoco OBJECT IDENTIFIER ::= { mibs 4 } as2000 OBJECT IDENTIFIER ::= { orinoco 3 } --============================================================================= -- Defining the Product Identification for AS-2000 (to be used for sysObjectID) --============================================================================= products OBJECT IDENTIFIER ::= { lucent 1 } orinocoProducts OBJECT IDENTIFIER ::= { products 4 } as2000Product OBJECT IDENTIFIER ::= { orinocoProducts 4 } --============================================================================= -- The various groups in this agent --============================================================================= orinocoInterface OBJECT IDENTIFIER ::= { as2000 3 } orinocoSNMPSetup OBJECT IDENTIFIER ::= { as2000 4 } orinocoPPPSetup OBJECT IDENTIFIER ::= { as2000 5 } orinocoAgent OBJECT IDENTIFIER ::= { as2000 6 } radius OBJECT IDENTIFIER ::= { as2000 7 } orinocoShimECPSetup OBJECT IDENTIFIER ::= { as2000 8 } orinocoDiagnostics OBJECT IDENTIFIER ::= { as2000 10 } orinocoIAPP OBJECT IDENTIFIER ::= { as2000 11 } orinocoIPX OBJECT IDENTIFIER ::= { as2000 12 } orinocoLinkTest OBJECT IDENTIFIER ::= { as2000 13 } accessServerTraps OBJECT IDENTIFIER ::= { as2000 15 } --============================================================================= -- The sub-groups of orinocoInterface --============================================================================= orinocoPHY OBJECT IDENTIFIER ::= { orinocoInterface 2 } orinocoDriver OBJECT IDENTIFIER ::= { orinocoInterface 4 } --============================================================================= -- The orinocoPHY sub-group of orinocoInterface --============================================================================= pliSystemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The sysName of the Access Server. This may be used for diagnostic purposes. This name will be the same as the sysName of the system group of MIB II" ::= { orinocoPHY 1 } psWlanIfTable OBJECT-TYPE SYNTAX SEQUENCE OF PsWlanIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table contains the information about the wavelan interfaces present in the Access Server." ::= { orinocoPHY 2 } psWlanIfEntry OBJECT-TYPE SYNTAX PsWlanIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry in the wavelan interfac table. Described next." INDEX { pliWlanIfIndex } ::= { psWlanIfTable 1 } PsWlanIfEntry ::= SEQUENCE { pliWlanIfIndex INTEGER, pliWlanIfNetworkName DisplayString, pliWlanIfMACAddress PhysAddress, pliWlanIfMediumReservation INTEGER, pliWlanIfTransmitRate INTEGER, pliWlanIfOperatingFrequency INTEGER, pliWlanIfAPDensity INTEGER, pliWlanIfClosedSystem INTEGER, pliWlanIfAllowedTransmitRates INTEGER, pliWlanIfRegulatoryDomainList OCTET STRING, pliWlanIfAllowedOperatingFrequencies INTEGER, pliWlanIfCapabilityOptions INTEGER, pliWlanIfProfileCode INTEGER } ifIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each interface. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { psWlanIfEntry 1 } pliWlanIfNetworkName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The network name of this wavelan interface" ::= { psWlanIfEntry 2 } pliWlanIfMACAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the wavelan card present in this interface." ::= { psWlanIfEntry 3 } pliWlanIfMediumReservation OBJECT-TYPE SYNTAX INTEGER(0..2347) ACCESS read-write STATUS mandatory DESCRIPTION "The medium reservation value. The range is 0 - 2347. Default is 2347 - means disabled. Medium reservation specifies the number of octets in a message above which a RTS/CTS handshake is performed." ::= { psWlanIfEntry 4 } pliWlanIfTransmitRate OBJECT-TYPE SYNTAX INTEGER -- { -- one-fixed(1), -- two-fixed(2), -- two-autofallback(3), -- fixed-medium(4), -- fixed-high(5), -- auto-fallback-standard(6), -- auto-fallback-medium(7) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The transmit rate of this interface." ::= { psWlanIfEntry 5 } pliWlanIfOperatingFrequency OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-write STATUS mandatory DESCRIPTION "The RF channel that the Access Server is working on." ::= { psWlanIfEntry 6 } pliWlanIfAPDensity OBJECT-TYPE SYNTAX INTEGER -- { -- low(1), -- medium(2), -- high(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The AP density in the region." ::= { psWlanIfEntry 7 } pliWlanIfClosedSystem OBJECT-TYPE SYNTAX INTEGER -- { -- closed(1), -- open(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This flag identifies whether the Access Server will accept associate requests in this interface, from AS-Clients having a network name of 'ANY'. The Access Server should always be a closed station and such requests should always be rejected. This flag is provided for diagnostic purposes." ::= { psWlanIfEntry 8 } pliWlanIfAllowedTransmitRates OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variables reflects the transmit rates that the wavelan card supports" ::= { psWlanIfEntry 9 } pliWlanIfRegulatoryDomainList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This variables reflects the regulatory domain the wavelan card belongs to." ::= { psWlanIfEntry 10 } pliWlanIfAllowedOperatingFrequencies OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variables reflects the RF channels that the wavelan card supports." ::= { psWlanIfEntry 11 } pliWlanIfCapabilityOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The capabilities of the card. Indicates the support of features like WEP." ::= { psWlanIfEntry 12 } pliWlanIfProfileCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The varible conprises of a vendor indication (Lucent or an OEM customer) and a capability indication (eg. bronze or gold)." ::= { psWlanIfEntry 13 } --============================================================================= -- The orinocoDriver sub-group of orinocoInterface --============================================================================= pliDriverName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The driver name." ::= { orinocoDriver 1 } pliDriverVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The driver's version number. This is a text string including the major and minor release number, and, optionally, the patch level: 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number." ::= { orinocoDriver 2 } --============================================================================= -- The orinocoSNMPSetup specific management objects --============================================================================= psSNMPReadPassword OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "The password for reading object values from the agent." ::= { orinocoSNMPSetup 1 } psSNMPReadWritePassword OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "The password for reading and modifying object values from the agent." ::= { orinocoSNMPSetup 2 } psSNMPTrapHostIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the host to which traps should be sent." ::= { orinocoSNMPSetup 3 } psSNMPTrapHostPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password sent with the trap to enable the management station to ignore unsolicited traps." ::= { orinocoSNMPSetup 4 } psSNMPManagerCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of management stations that have been authorised to manage this Access Server." ::= { orinocoSNMPSetup 5 } psSNMPAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF PsSNMPAccessTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table containing the information about the managers authorised to manage this Access Server." ::= { orinocoSNMPSetup 6 } psSNMPAccessTableEntry OBJECT-TYPE SYNTAX PsSNMPAccessTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry in the SNMP access table. Described next." INDEX { psSNMPManagerIndex } ::= { psSNMPAccessTable 1 } PsSNMPAccessTableEntry ::= SEQUENCE { ManagerIndex INTEGER, ManagerIPAddress IpAddress, ManagerSubnetMask IpAddress, ManagerStatus INTEGER } ManagerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Management station identification number. Is the index for the table." ::= { psSNMPAccessTableEntry 1 } ManagerIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the management station." ::= { psSNMPAccessTableEntry 2 } ManagerSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP subnet mask. Used to grant access to a complete subnet." ::= { psSNMPAccessTableEntry 3 } ManagerStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the manager is enabled or disabled. Used to delete the unwanted entries." ::= { psSNMPAccessTableEntry 4 } psSNMPInBadManagers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The no of attempts to manage this Access Server by unauthorised managers." ::= { orinocoSNMPSetup 7 } psTestSNMPReadWritePassword OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "The password for reading and modifying object values from the agent can be verified by setting this." ::= { orinocoSNMPSetup 8 } --============================================================================= -- The orinocoPPPSetup specific management objects --============================================================================= psPPPIPAddressAssignmentType OBJECT-TYPE SYNTAX INTEGER -- { -- apm(1), -- dhcp-relay(2), -- radius(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This identifies whether the IP addresses assigned to the AS-Clients are obtained through APM (address pool manager), through DHCP or through the RADIUS server." ::= { orinocoPPPSetup 1 } psPPPNoOfMACIPMappingEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of static mapping entries." ::= { orinocoPPPSetup 2 } psPPPMACIPMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF PsPPPMACIPMappingTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the static mapping of MAC addresses to IP addresses." ::= { orinocoPPPSetup 3 } psPPPMACIPMappingTableEntry OBJECT-TYPE SYNTAX PsPPPMACIPMappingTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry of the asPPPMACIPMappingTable Described below." INDEX { psPPPMACIPTableIndex } ::= { psPPPMACIPMappingTable 1 } PsPPPMACIPMappingTableEntry ::= SEQUENCE { MACIPIndex INTEGER, MACAddress PhysAddress, IPAddress IpAddress, Comment DisplayString, EntryStatus INTEGER } MACIPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is the index for the mappping table." ::= { psPPPMACIPMappingTableEntry 1 } MACAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the MAC address." ::= { psPPPMACIPMappingTableEntry 2 } IPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address corresponding to the MAC address." ::= { psPPPMACIPMappingTableEntry 3 } Comment OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The comment for this entry, maybe the PC's owner." ::= { psPPPMACIPMappingTableEntry 4 } EntryStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), -- disable(2) delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the entry is enabled or disabled. Used to delete the unwanted entries." ::= { psPPPMACIPMappingTableEntry 5 } psPPPKeepAliveInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The keep alive interval to be notified to the PPP layer." ::= { orinocoPPPSetup 4 } psPPPNoOfKeepAliveTimeouts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of timeouts before the session is torn down." ::= { orinocoPPPSetup 5 } psPPPPrimaryDNSIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the primary DNS server in the network." ::= { orinocoPPPSetup 6 } psPPPSecondaryDNSIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the secondary DNS server in the network." ::= { orinocoPPPSetup 7 } psPPPMaxNoOfUsers OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum no of clients permitted to connect to this Access Server." ::= { orinocoPPPSetup 8 } psPPPCHAPStatus OBJECT-TYPE SYNTAX INTEGER -- { -- enable(1), -- disable(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the status of CHAP in the Access Server." ::= { orinocoPPPSetup 9 } psPPPCHAPPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the priority of CHAP among all authentictaion protocols enabled on the Access Server." ::= { orinocoPPPSetup 10 } psPPPPAPStatus OBJECT-TYPE SYNTAX INTEGER -- { -- enable(1), -- disable(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the status of PAP in the Access Server." ::= { orinocoPPPSetup 11 } psPPPPAPPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the priority of PAP among all authentictaion protocols enabled on the Access Server." ::= { orinocoPPPSetup 12 } psPPPPrimaryNBNSIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Primary NBNS server in the network." ::= { orinocoPPPSetup 13 } psPPPSecondaryNBNSIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Secondary NBNS server in the network." ::= { orinocoPPPSetup 14 } psPPPIPRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF PsPPPIPRangeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the static mapping of MAC addresses to IP addresses." ::= { orinocoPPPSetup 15 } psPPPIPRangeTableEntry OBJECT-TYPE SYNTAX PsPPPIPRangeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry of the psPPPIPRangeTable. Described below." INDEX { psPPPIPRangeTableIndex } ::= { psPPPIPRangeTable 1 } PsPPPIPRangeTableEntry ::= SEQUENCE { PPPIPIndex INTEGER, StartIPAddress IpAddress, EndIPAddress IpAddress, Width INTEGER, IPComment DisplayString, Status INTEGER } PPPIPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is the index for the IP range table." ::= { psPPPIPRangeTableEntry 1 } StartIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the staring IP address of this range." ::= { psPPPIPRangeTableEntry 2 } EndIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This is the ending IP address of this range." ::= { psPPPIPRangeTableEntry 3 } Width OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the withd of the range (no of addresses)." ::= { psPPPIPRangeTableEntry 4 } Status OBJECT-TYPE SYNTAX INTEGER { enable(1), -- disable(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the entry, whether to be used or not used. Setting this to delete will remove this entry." ::= { psPPPIPRangeTableEntry 5 } IPComment OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The comment for this entry may be the PC owner." ::= { psPPPIPRangeTableEntry 6 } psPPPSessionIdleTimeOut OBJECT-TYPE SYNTAX INTEGER (0..36000) ACCESS read-write STATUS mandatory DESCRIPTION "The varible indicates the Session Idle time out." ::= { orinocoPPPSetup 16 } --============================================================================= -- The orinoco agent specific management objects --============================================================================= psVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The version of the Access Server software currently execuing. Would be text string including the major and minor release number, and, optionally, the patch level: 'mm.nn.pp', where mm = major release number nn = point release number pp = optional patch number." ::= { orinocoAgent 1 } psIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address to be assigned to the Access Server (to change from factory fitted IP address)." ::= { orinocoAgent 2 } psSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask of the Access Server." ::= { orinocoAgent 3 } psDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The default gateway for the Access Server." ::= { orinocoAgent 4 } psIPAddressType OBJECT-TYPE SYNTAX INTEGER -- { -- static(1), -- dynamic(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This can be DHCP/BOOTP(dynamic) or assigned by User via CLI or AS Manager(static). The IP address of the Access Server will be assigned based on this." ::= { orinocoAgent 5 } psAdministrativeState OBJECT-TYPE SYNTAX INTEGER -- { -- up(1), -- down(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative state of the substation, can be Up or Down." ::= { orinocoAgent 6 } psTFTPIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the TFTP server." ::= { orinocoAgent 7 } psTFTPFilename OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The filename of the image in the TFTP server." ::= { orinocoAgent 8 } psTFTPOperation OBJECT-TYPE SYNTAX INTEGER -- { -- upload(1), -- download(2), -- downloadAndReboot(3) -- } ACCESS write-only STATUS mandatory DESCRIPTION "The operation to be done, can be upload or download." ::= { orinocoAgent 9 } psReboot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable must be set to reboot the Access Server. The value is the number of seconds to wait to do a reboot." ::= { orinocoAgent 10 } psSecondsToAdminDown OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The count of seconds to go before the administrative state of the Access Server is made down." ::= { orinocoAgent 11 } psContactEmail OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The textual identification of the contact person for this managed node, together with information on how to contact this person." ::= { orinocoAgent 12 } psBSPBootloaderVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the BSP/Bootloader version that is currently stored in the access server device.." ::= { orinocoAgent 13 } -- #ifdef PL2 psTelnetStatus OBJECT-TYPE SYNTAX INTEGER -- { -- enable(1), -- disable(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "To enable or disable Telnet interface." ::= { orinocoAgent 14 } psTelnetPassword OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Password to access Access Server from Telenet." ::= { orinocoAgent 15 } psTelnetPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The TCP/IP port for Access Server Telenet daemon." ::= { orinocoAgent 16 } psTelnetTimeout OBJECT-TYPE SYNTAX INTEGER(1..30) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet inactivity timeout in minutes. The default value is 15 minutes" ::= { orinocoAgent 17 } psTelnetLoginTimeout OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet login timeout in seconds. The default value is 30 seconds" ::= { orinocoAgent 18 } psSerialBaudRate OBJECT-TYPE SYNTAX INTEGER -- { -- baud2400(1), -- baud4800(2), -- baud9600(3), -- baud19200(4), -- baud38400(5), -- baud57600(6), -- baud115200(7), -- auto(8) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Serial interface baud rate. The default value is 9600" ::= { orinocoAgent 19 } psSerialDataBits OBJECT-TYPE SYNTAX INTEGER(4..8) ACCESS read-write STATUS mandatory DESCRIPTION "Serial interface data bits. The default value is 8" ::= { orinocoAgent 20 } psSerialParity OBJECT-TYPE SYNTAX INTEGER -- { -- even(1), -- odd(2), -- none(3), -- mark(4), -- space(5) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Serial interface Parity check. The default value is None" ::= { orinocoAgent 21 } psSerialStopBits OBJECT-TYPE SYNTAX INTEGER -- { -- bit1(1), -- bit1dot5(2), -- bit2(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Serial interface stop bits. The default value is 1" ::= { orinocoAgent 22 } psSerialFlowControl OBJECT-TYPE SYNTAX INTEGER -- { -- xonXoff(1), -- hardware(2), -- none(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Serial interface Flow control. The default value is None" ::= { orinocoAgent 23 } -- #endif PL2 psTFTPFileType OBJECT-TYPE SYNTAX INTEGER -- { -- config-sys(1), -- psimage(2), -- orinoco(3), -- radius(4), -- snmpset(5), -- sysinfo(6), -- ppp(7), -- bspbl(8) -- orgbspbl(9) -- } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the file to be uploaded or downloaded to/from the access server." ::= { orinocoAgent 24 } psDeviceSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This parameter identifies the serial number of the system." ::= { orinocoAgent 25 } --============================================================================= -- RADIUS-CLIENT-MIB DEFINITIONS ::= BEGIN -- radius OBJECT IDENTIFIER -- DESCRIPTION -- "The OID assigned to RADIUS MIB work by the IANA." -- "The OID assigned to RADIUS MIB work by orinoco."orinoco -- ::= { as-2000 5 } -- Moving this up to the common section radiusClientMIB OBJECT IDENTIFIER -- DESCRIPTION -- "The MIB module for RADIUS Client Management." -- ::= { radius 2 } --============================================================================= radiusClientMIB OBJECT IDENTIFIER ::= { radius 2 } radiusClientMIBObjects OBJECT IDENTIFIER ::= { radiusClientMIB 1 } radiusClient OBJECT IDENTIFIER ::= { radiusClientMIBObjects 1 } radiusClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Response messages received from unknown addresses since client start-up" ::= { radiusClient 1 } radiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the RADIUS servers with which the client shares a secret." ::= { radiusClient 2 } radiusServerEntry OBJECT-TYPE SYNTAX RadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) representing a RADIUS server with which the client shares a secret." INDEX {radiusServerIndex} ::= { radiusServerTable 1 } RadiusServerEntry ::= SEQUENCE { radiusServerIndex INTEGER, radiusServerType INTEGER, radiusServerAddress IpAddress, radiusServerDestPortAuth INTEGER, radiusServerDestPortAcct INTEGER, radiusClientAccessRequests Counter, radiusClientAccessRetransmissions Counter, radiusClientAccessAccepts Counter, radiusClientAccessChallenges Counter, radiusClientMalformedAccessResponses Counter, radiusClientAuthenticationBadAuthenticators Counter, radiusClientAccessRejects Counter, radiusClientTimeouts Counter, radiusClientAccountingRequests Counter, radiusClientAccountingRetransmissions Counter, radiusClientAccountingResponses Counter, radiusClientAccountingBadAuthenticators Counter, radiusServerSharedSecret DisplayString, radiusServerEnabled INTEGER, radiusServerResponseTime INTEGER, radiusServerMaximumRetransmission INTEGER } radiusServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The RADIUS server with whom the client interacts." ::= { radiusServerEntry 1 } radiusServerType OBJECT-TYPE SYNTAX INTEGER -- { -- auth(1), -- acct(2), -- both(3) -- } ACCESS read-only STATUS mandatory DESCRIPTION "The RADIUS server type (Authentication or Accounting or Both). For creating a server entry Server Type should be set" ::= { radiusServerEntry 2 } radiusServerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the RADIUS server referred to in this table entry." ::= { radiusServerEntry 3 } radiusServerDestPortAuth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The Authentication port of the RADIUS Server." ::= { radiusServerEntry 4 } radiusServerDestPortAcct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Accounting port of the RADIUS Server." ::= { radiusServerEntry 5 } radiusClientAccessRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Request messages sent since client start-up" ::= { radiusServerEntry 6 } radiusClientAccessRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Request messages retransmitted since client start-up" ::= { radiusServerEntry 7 } radiusClientAccessAccepts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Accept messages received since client start-up" ::= { radiusServerEntry 8 } radiusClientAccessChallenges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Challenge messages received since client start-up" ::= { radiusServerEntry 9 } radiusClientMalformedAccessResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of malformed RADIUS Access-Response messages received since client start-up" ::= { radiusServerEntry 10 } radiusClientAuthenticationBadAuthenticators OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Response messages containing invalid authenticators received since client start-up" ::= { radiusServerEntry 11 } radiusClientAccessRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Access-Reject messages sent since client start-up" ::= { radiusServerEntry 12 } radiusClientTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of timeouts since client startup" ::= { radiusServerEntry 13 } radiusClientAccountingRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Accounting-Request messages sent since client start-up" ::= { radiusServerEntry 14 } radiusClientAccountingRetransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Accounting-Request messages retransmitted since client start-up" ::= { radiusServerEntry 15 } radiusClientAccountingResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Accounting-Response messages received since client start-up" ::= { radiusServerEntry 16 } radiusClientAccountingBadAuthenticators OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of RADIUS Accounting-Response messages which contained invalid authenticators received since client start-up" ::= { radiusServerEntry 17 } radiusServerSharedSecret OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The secret string which is shared between Server and Client" ::= { radiusServerEntry 18 } radiusServerEnabled OBJECT-TYPE SYNTAX INTEGER -- { -- enable(1), -- disable(2), -- delete(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Flag to tell whether the server is active or Inactive" ::= { radiusServerEntry 19 } radiusServerResponseTime OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum time within which the server has to respond for a request from the client" ::= { radiusServerEntry 20 } radiusServerMaximumRetransmission OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-write STATUS mandatory DESCRIPTION "The allowed maximum no. of trials to be tried by a client to get response from the server for a request" ::= { radiusServerEntry 21 } --============================================================================= -- conformance information --============================================================================= radiusClientMIBConformance OBJECT IDENTIFIER ::= { radiusClientMIB 2 } radiusClientMIBCompliances OBJECT IDENTIFIER ::= { radiusClientMIBConformance 1 } radiusClientMIBGroups OBJECT IDENTIFIER ::= { radiusClientMIBConformance 2 } --============================================================================= -- Access Server ECP Information --============================================================================= psShimECPRetransmissionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of retransmissions when responses are not received with the timeout period." ::= { orinocoShimECPSetup 1 } psShimECPRepeatResponseCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of time the transmitted response can be retransmitted." ::= { orinocoShimECPSetup 2 } psShimECPRetransmissionTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The timeout interval for a response to be received." ::= { orinocoShimECPSetup 3 } -- #ifdef PL2 --============================================================================= -- Access Server IAPP Information --============================================================================= psIappStatus OBJECT-TYPE SYNTAX INTEGER -- { -- enable (1), -- disable (2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "IAPP Status (whether IAPP feature should be enabled or diaabled)" ::= { orinocoIAPP 1 } psIappAnnReqOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ANNOUNCE.requests sent." ::= { orinocoIAPP 2 } psIappAnnReqIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ANNOUNCE.requests received." ::= { orinocoIAPP 3 } psIappAnnRespOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ANNOUNCE.responses sent." ::= { orinocoIAPP 4 } psIappAnnRespIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of ANNOUNCE.responses received." ::= { orinocoIAPP 5 } psIappHandOvrReqOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of HANDOVER.request sent." ::= { orinocoIAPP 6 } psIappHandOvrReqIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of HANDOVER.request received." ::= { orinocoIAPP 7 } psIappHandOvrRespOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of HANDOVER.responses sent." ::= { orinocoIAPP 8 } psIappHandOvrRespIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of HANDOVER.responses received." ::= { orinocoIAPP 9 } psIappEndSessOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of IAPP End-PPP session PDUs sent." ::= { orinocoIAPP 10 } psIappEndSessIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of IAPP End-PPP session PDUs received." ::= { orinocoIAPP 11 } psIappEndSessAckOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of IAPP End-PPP session acknowledgement PDUs sent." ::= { orinocoIAPP 12 } psIappEndSessAckIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of IAPP End-PPP session acknowledgement PDUs received." ::= { orinocoIAPP 13 } psIappPduDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of IAPP PDUs dropped." ::= { orinocoIAPP 14 } psIappHandOvrReqReSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of HANDOVER requests re-transmitted.." ::= { orinocoIAPP 15 } psIappAnnInterval OBJECT-TYPE SYNTAX INTEGER -- { -- eighty(80), -- oneHundredTwenty(120), -- oneHundredSixty(160), -- twoHundred(200) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter represents interval in seconds for performing an IAPP announce operation by the device. The units for this parameter is seconds and default value should be 120 seconds." ::= { orinocoIAPP 16 } psIappAnnRespTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter indicates the amount of time in seconds the device waits to send an IAPP announce response after an announce request message is sent. This parameter is set to a default value of 2 seconds and is not configurable." ::= { orinocoIAPP 17 } psIappHandOvrTimeOut OBJECT-TYPE SYNTAX INTEGER -- { -- fiveHundredTwelve(512), -- sixHundredFourteen(614), -- sevenHundredSeventeen(717), -- eightHundredNineteen(819) -- } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter represents the time in milliseconds the device waits before it resends a handover response message. The default value for this parameter should be 512 milliseconds." ::= { orinocoIAPP 18 } psIappMaxHandOvrRetries OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the maximum amount of retransmission sent by the device for a handover request message. The default for this parameter should be 2." ::= { orinocoIAPP 19 } psIappRoamingClients OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of roaming clients currently attached to the Access Server." ::= { orinocoIAPP 20 } psIAPPMacIpTable OBJECT-TYPE SYNTAX SEQUENCE OF PsIAPPMacIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing AS-2000 devices in the same subnet that have the IAPP function enabled." ::= { orinocoIAPP 21 } psIAPPMacIpEntry OBJECT-TYPE SYNTAX PsIAPPMacIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) representing an AS-2000 device, maintaining it's IP address and Wireless MAC Address." INDEX {psIAPPMacIpIndex} ::= { psIAPPMacIpTable 1 } PsIAPPMacIpEntry ::= SEQUENCE { psIAPPMacIpIndex INTEGER, psIAPPPeerSystemName DisplayString, psIAPPPeerIPAddr IpAddress, psIAPPPeerWlessIf1MACAddr PhysAddress, psIAPPPeerWlessIf2MACAddr PhysAddress, psIAPPPeerNetworkNameWlessIf1 DisplayString, psIAPPPeerNetworkNameWlessIf2 DisplayString } psIAPPMacIpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for the AS-200 IAPP MAC-IP table." ::= { psIAPPMacIpEntry 1 } psIAPPPeerSystemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The System Name of the AS-2000 peer." ::= { psIAPPMacIpEntry 2 } psIAPPPeerIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Peer AS-2000 device where IAPP is enabled." ::= { psIAPPMacIpEntry 3 } psIAPPPeerWlessIf1MACAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the wireless interface 1 of the peer AS-2000 device which has IAPP enabled." ::= { psIAPPMacIpEntry 4 } psIAPPPeerWlessIf2MACAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the wireless interface 2 of the peer AS-2000 device which has IAPP enabled." ::= { psIAPPMacIpEntry 5 } psIAPPPeerNetworkNameWlessIf1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The network name of wireless interface 1 of the peer AS-2000 device which has the IAPP function enabled." ::= { psIAPPMacIpEntry 6 } psIAPPPeerNetworkNameWlessIf2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The network name of wireless interface 1 of the peer AS-2000 device which has the IAPP function enabled." ::= { psIAPPMacIpEntry 7 } --============================================================================= -- IPX objects --============================================================================= psIpxStatus OBJECT-TYPE SYNTAX INTEGER -- { -- ip(1), -- ipx(2), -- both(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Which protocol is supported, i.e, IP or IPX or both IP and IPX." ::= { orinocoIPX 1 } psIpxDefaultRouterNodeNum OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "If the source IPX network number is not equal to the destination IPX Network number in the packet from wireless side to the wired side, then replace the destination Ether MAC addr with the value of this object (Default IPX router node number)." ::= { orinocoIPX 2 } psIpxWiredToWlessBridged OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets bridged from wired side to wireless side." ::= { orinocoIPX 3 } psIpxWlessToWiredBridged OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets bridged from wiredless side to wired side." ::= { orinocoIPX 4 } psIpxEthernetEncapsulationFormat OBJECT-TYPE SYNTAX INTEGER -- { -- ethII802dot3encapsulation(1), -- eth802dot3withSnapHdr(2), -- eth802dot3woSnapHdr(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "Encapsulation type to be used for the IPX packets sent in wired side" ::= { orinocoIPX 5 } psASClientTable OBJECT-TYPE SYNTAX SEQUENCE OF PsASClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the ASClients (IPX) connected to the access server 2000 device." ::= { orinocoIPX 6 } psASClientEntry OBJECT-TYPE SYNTAX PsASClientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) representing a ASClient (IPX) connnected to the Access Server 2000 device." INDEX {psPPPSessionId} ::= { psASClientTable 1 } PsASClientEntry ::= SEQUENCE { psPPPSessionId INTEGER, psIpxClientNetworkNumber OCTET STRING, psIpxClientMAC PhysAddress, psIpxClientStatus INTEGER } psPPPSessionId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The PPP Session ID assigned by the AS-2000 to this ASClient." ::= { psASClientEntry 1 } psIpxClientNetworkNumber OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The IPX Node Number assigned by the Novell Server to this IPX client." ::= { psASClientEntry 2 } psIpxClientMAC OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Wireless MAC of this IPX Client." ::= { psASClientEntry 3 } psIpxClientStatus OBJECT-TYPE SYNTAX INTEGER { up (1), disable(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Flag to indicate whether the IPX Client is Active or Inactive. IPX Client status can also be disabled/enabled/deleted." ::= { psASClientEntry 4 } -- #endif PL2 --============================================================================= -- Access Server Link Test Group --============================================================================= oriLinkTestTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this parameter determines the time that a link test will continue without any SNMP requests for a Link Test Table entry. When the time expires the Link Test Table is cleared." ::= { orinocoLinkTest 1 } oriLinkTestInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the interval (in millisec) between sending link test frames to a station. Default on 200 millisecond." ::= { orinocoLinkTest 3 } oriLinkTestExplore OBJECT-TYPE SYNTAX INTEGER -- { -- tabletimedout(1), -- exploring(2), -- exploreresultsavailable(3) -- } ACCESS read-write STATUS mandatory DESCRIPTION "When this parameter is set to 2, the access point will send out an explore request on all 802.11 interfaces and from the results build the Link Test table. This table is valid only while this parameter is 3." ::= { orinocoLinkTest 4 } oriLinkTestTable OBJECT-TYPE SYNTAX SEQUENCE OF OriLinkTestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the information for the stations currently associated with this access point." ::= { orinocoLinkTest 5 } oriLinkTestTableEntry OBJECT-TYPE SYNTAX OriLinkTestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This parameter represents the entry in the Remote Link Test table.This is described below." INDEX { oriLinkTestTableIndex } ::= { oriLinkTestTable 1 } OriLinkTestTableEntry ::= SEQUENCE { oriLinkTestTableIndex INTEGER, oriLinkTestInProgress INTEGER, oriLinkTestStationName DisplayString, oriLinkTestMACAddress PhysAddress, oriLinkTestStationProfile INTEGER, oriLinkTestOurCurSignalLevel INTEGER, oriLinkTestOurCurNoiseLevel INTEGER, oriLinkTestOurCurSNR INTEGER, oriLinkTestOurMinSignalLevel INTEGER, oriLinkTestOurMinNoiseLevel INTEGER, oriLinkTestOurMinSNR INTEGER, oriLinkTestOurMaxSignalLevel INTEGER, oriLinkTestOurMaxNoiseLevel INTEGER, oriLinkTestOurMaxSNR INTEGER, oriLinkTestOurLowFrameCount INTEGER, oriLinkTestOurStandardFrameCount INTEGER, oriLinkTestOurMediumFrameCount INTEGER, oriLinkTestOurHighFrameCount INTEGER, oriLinkTestHisCurSignalLevel INTEGER, oriLinkTestHisCurNoiseLevel INTEGER, oriLinkTestHisCurSNR INTEGER, oriLinkTestHisMinSignalLevel INTEGER, oriLinkTestHisMinNoiseLevel INTEGER, oriLinkTestHisMinSNR INTEGER, oriLinkTestHisMaxSignalLevel INTEGER, oriLinkTestHisMaxNoiseLevel INTEGER, oriLinkTestHisMaxSNR INTEGER, oriLinkTestHisLowFrameCount INTEGER, oriLinkTestHisStandardFrameCount INTEGER, oriLinkTestHisMediumFrameCount INTEGER, oriLinkTestHisHighFrameCount INTEGER, oriLinkTestInterface INTEGER, oriLinkTestRadioType INTEGER } oriLinkTestTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter represents a unique value for each stattion. The value for each station must remain constant at least from one explore to the next." ::= { oriLinkTestTableEntry 1 } oriLinkTestInProgress OBJECT-TYPE SYNTAX INTEGER -- { -- nolinktestinprogress(1), -- linktestinprogress(2) -- } ACCESS read-write STATUS mandatory DESCRIPTION "When this parameter is set to 2 the access point will initiate a link test sequence with this station. " ::= { oriLinkTestTableEntry 2 } oriLinkTestStationName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This parameter identifies the name of the station whom which the link test is being performed." ::= { oriLinkTestTableEntry 3 } oriLinkTestMACAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the MAC address that will be mapped to the IP Address of the station." ::= { oriLinkTestTableEntry 4 } oriLinkTestStationProfile OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This parameter represents the profile/capabilities for this station." ::= { oriLinkTestTableEntry 5 } oriLinkTestOurCurSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current signal level (in dB)for the link test from this station. This variable indicates the running average of the local signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)." ::= { oriLinkTestTableEntry 6 } oriLinkTestOurCurNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current noise level (in dB)for the link test to this station. This variable indicates the running average of the local noise level." ::= { oriLinkTestTableEntry 7} oriLinkTestOurCurSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current signal to noise ratio for the link test to this station." ::= { oriLinkTestTableEntry 8 } oriLinkTestOurMinSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum signal level during the link test to this station." ::= { oriLinkTestTableEntry 9 } oriLinkTestOurMinNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum noise level during the link test to this station." ::= { oriLinkTestTableEntry 10 } oriLinkTestOurMinSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum signal to noise ratio during the link test to this station." ::= { oriLinkTestTableEntry 11 } oriLinkTestOurMaxSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum signal level during the link test to this station." ::= { oriLinkTestTableEntry 12 } oriLinkTestOurMaxNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum noise level during the link test to this station." ::= { oriLinkTestTableEntry 13 } oriLinkTestOurMaxSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum signal to noise ratio during the link test to this station." ::= { oriLinkTestTableEntry 14 } oriLinkTestOurLowFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 1 Mbit/s speed during the link test to this station." ::= { oriLinkTestTableEntry 15 } oriLinkTestOurStandardFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 2 Mbit/s speed during the link test to this station." ::= { oriLinkTestTableEntry 16 } oriLinkTestOurMediumFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to this station." ::= { oriLinkTestTableEntry 17 } oriLinkTestOurHighFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 8 Mbit/s) speed during the link test to this station." ::= { oriLinkTestTableEntry 18 } oriLinkTestHisCurSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current signal level for the link test to the remote station or access point." ::= { oriLinkTestTableEntry 19 } oriLinkTestHisCurNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current noise level for the link test to the remote station or access point." ::= { oriLinkTestTableEntry 20 } oriLinkTestHisCurSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current signal to noise ratio for the link test to the remote station or access point." ::= { oriLinkTestTableEntry 21 } oriLinkTestHisMinSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum signal level during the link test to the remote statio or access point." ::= { oriLinkTestTableEntry 22 } oriLinkTestHisMinNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum noise level during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 23 } oriLinkTestHisMinSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum signal to noise ratio during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 24 } oriLinkTestHisMaxSignalLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum signal level during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 25 } oriLinkTestHisMaxNoiseLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum noise level during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 26 } oriLinkTestHisMaxSNR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum signal to noise ratio during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 27 } oriLinkTestHisLowFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 1 Mbit/s speed during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 28 } oriLinkTestHisStandardFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 2 Mbit/s speed during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 29 } oriLinkTestHisMediumFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 30 } oriLinkTestHisHighFrameCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 5 Mbit/s) speed during the link test to the remote station or access point." ::= { oriLinkTestTableEntry 31 } oriLinkTestInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The PCMCIA Card Number to which the Client has sent the Explore Response Message." ::= { oriLinkTestTableEntry 32 } oriLinkTestRadioType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the Radio." ::= { oriLinkTestTableEntry 33 } --============================================================================= -- Access Server Trap Variables --============================================================================= accessServerTrapVariables OBJECT IDENTIFIER ::= { accessServerTraps 1 } accessServerGenericInformationMessage OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "Any generic string information can be sent as this message." ::= { accessServerTrapVariables 1 } accessServerMacAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The MAC address that is sent with the traps to identify which Access Server has the problem " ::= { accessServerTrapVariables 2 } accessServerFailedTFTPServerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The ip address configured as the TFTP server for which the operation upload/download failed." ::= { accessServerTrapVariables 3 } accessServerFailedTFTPFilename OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The filename configured to be retrieved/sent from/to the TFTP server for which the operation upload/download failed." ::= { accessServerTrapVariables 4 } accessServerFailedTFTPOperation OBJECT-TYPE SYNTAX INTEGER -- { -- upload(1), -- download(2) -- } ACCESS not-accessible STATUS mandatory DESCRIPTION "The operation that failed, can be upload or download." ::= { accessServerTrapVariables 5 } accessServerSuspendedTaskName OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "The task that was suspended, can be several tasks executed within the Access Server." ::= { accessServerTrapVariables 6 } --============================================================================= -- Access Server Flash Related Traps --============================================================================= accessServerFlashRelatedTraps OBJECT IDENTIFIER ::= { accessServerTraps 2 } accessServerFlashEmpty TRAP-TYPE ENTERPRISE accessServerFlashRelatedTraps DESCRIPTION "This trap is sent when the FLASH is empty." ::= 1 accessServerFlashCorrupted TRAP-TYPE ENTERPRISE accessServerFlashRelatedTraps DESCRIPTION "This trap is sent when the data in the FLASH is corrupted." ::= 2 --============================================================================= -- Access Server Configuration Related Traps --============================================================================= accessServerConfigurationRelatedTraps OBJECT IDENTIFIER ::= { accessServerTraps 3 } accessServerInvalidKey TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when an invalid key is detected at the accessServer." ::= 1 accessServerAPMNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the APM information is not configured in the Access Server." ::= 2 accessServerIncompatibleWavelanCard TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when an ORiNOCO PC Card plugged in the Access Server is not compatible with the firmware versions supported." ::= 3 accessServerWavelanCardFailure TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when an ORiNOCO PC Card is not there or there is a failure in the ORiNOCO PC card." ::= 4 accessServerWavelanCardRemoved TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the wavelan card removed when the wavelan card is removed while the Access Server is in operation." ::= 5 accessServerRadiusNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the radius information is not configured in the Access Server." ::= 6 accessServerDNSIPNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the DNS IP information is not configured in the Access Server." ::= 7 accessServerNBNSIPNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the NBNS IP information is not configured in the Access Server." ::= 8 accessServerRadiusAuthenticationNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the radius authentication information is not configured in the Access Server." ::= 9 accessServerRadiusAccountingNotConfigured TRAP-TYPE ENTERPRISE accessServerConfigurationRelatedTraps DESCRIPTION "This trap is sent when the radius accounting information is not configured in the Access Server." ::= 10 --============================================================================= -- Access Server Diagnostic Traps --============================================================================= accessServerDiagnosticTraps OBJECT IDENTIFIER ::= { accessServerTraps 4 } accessServerTFTPInitiated TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when a TFTP operation happens at the Access Server." ::= 1 accessServerTFTPCompleted TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when a TFTP operation failure happens at the Access Server." ::= 2 accessServerTFTPFailure TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when a TFTP operation failure happens at the Access Server." ::= 3 accessServerAdminStateMadeUp TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when the Access Server Admin state is made 'up'" ::= 4 accessServerAdminStateMadeDown TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when the Access Server Admin state is made 'down'" ::= 5 accessServerRebootingNow TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when the Access Server is about to reboot." ::= 6 accessServerTaskSuspended TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when a task has suspended in the Access Server." ::= 7 accessServerBootPFailed TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when the BootP protocol in the bootloader has failed." ::= 8 accessServerDHCPFailed TRAP-TYPE ENTERPRISE accessServerDiagnosticTraps DESCRIPTION "This trap is sent when the DHCP in the application software has failed." ::= 9 END --============================================================================= -- Access Server 2000 MIBs End --=============================================================================