Nortel-MsCarrier-MscPassport-IpxMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, PhysAddress, DisplayString, StorageType, RowStatus, Gauge32, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, DashedHexString, NonReplicated, Hex, AsciiStringIndex FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB mscVrIndex, mscVrPp, mscVrPpIndex, mscVr FROM Nortel-MsCarrier-MscPassport-VirtualRouterMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- Ipx Enterprise MIB." ipxMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 28 } -- Vr/ PP/ IpxP -- The IPX protocol specific information relating to this ProtocolPort -- instance. mscVrPpIpxP OBJECT IDENTIFIER ::= { mscVrPp 6 } mscVrPpIpxPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrPpIpxP components." ::= { mscVrPpIpxP 1 } mscVrPpIpxPRowStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrPpIpxP component." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPRowStatusTable 1 } MscVrPpIpxPRowStatusEntry ::= SEQUENCE { mscVrPpIpxPRowStatus RowStatus, mscVrPpIpxPComponentName DisplayString, mscVrPpIpxPStorageType StorageType, mscVrPpIpxPIndex INTEGER } mscVrPpIpxPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrPpIpxP components. These components can be added and deleted." ::= { mscVrPpIpxPRowStatusEntry 1 } mscVrPpIpxPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrPpIpxPRowStatusEntry 2 } mscVrPpIpxPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrPpIpxP tables." ::= { mscVrPpIpxPRowStatusEntry 4 } mscVrPpIpxPIndex OBJECT-TYPE SYNTAX INTEGER { link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrPpIpxP tables." ::= { mscVrPpIpxPRowStatusEntry 10 } mscVrPpIpxPAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { mscVrPpIpxP 100 } mscVrPpIpxPAdminControlEntry OBJECT-TYPE SYNTAX MscVrPpIpxPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPAdminControlTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPAdminControlTable 1 } MscVrPpIpxPAdminControlEntry ::= SEQUENCE { mscVrPpIpxPSnmpAdminStatus INTEGER } mscVrPpIpxPSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscVrPpIpxPAdminControlEntry 1 } mscVrPpIpxPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisionable group for the IpxPort component." ::= { mscVrPpIpxP 101 } mscVrPpIpxPProvEntry OBJECT-TYPE SYNTAX MscVrPpIpxPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPProvTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPProvTable 1 } MscVrPpIpxPProvEntry ::= SEQUENCE { mscVrPpIpxPNetworkNumberProv DashedHexString, mscVrPpIpxPDefaultType INTEGER, mscVrPpIpxPBroadcastInhibit INTEGER } mscVrPpIpxPNetworkNumberProv OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Ipx network number of the network directly connected to this port." ::= { mscVrPpIpxPProvEntry 1 } mscVrPpIpxPDefaultType OBJECT-TYPE SYNTAX INTEGER { other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running numbered RIP set value to wanRip. For running un-numbered RIP set value to unnumberedRip. Setting this value to ppp will signify unnumbered Rip running on a ppp port." ::= { mscVrPpIpxPProvEntry 2 } mscVrPpIpxPBroadcastInhibit OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on its network in order to limit the routing traffic, assuming that servers don't require routing information or other server information." DEFVAL { disabled } ::= { mscVrPpIpxPProvEntry 3 } mscVrPpIpxPSresProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for SourceRouteEndStation support." ::= { mscVrPpIpxP 102 } mscVrPpIpxPSresProvEntry OBJECT-TYPE SYNTAX MscVrPpIpxPSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPSresProvTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPSresProvTable 1 } MscVrPpIpxPSresProvEntry ::= SEQUENCE { mscVrPpIpxPSourceRouteEndStationSupport INTEGER } mscVrPpIpxPSourceRouteEndStationSupport OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component." DEFVAL { disable } ::= { mscVrPpIpxPSresProvEntry 1 } mscVrPpIpxPStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscVrPpIpxP 103 } mscVrPpIpxPStateEntry OBJECT-TYPE SYNTAX MscVrPpIpxPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPStateTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPStateTable 1 } MscVrPpIpxPStateEntry ::= SEQUENCE { mscVrPpIpxPAdminState INTEGER, mscVrPpIpxPOperationalState INTEGER, mscVrPpIpxPUsageState INTEGER } mscVrPpIpxPAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscVrPpIpxPStateEntry 1 } mscVrPpIpxPOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscVrPpIpxPStateEntry 2 } mscVrPpIpxPUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscVrPpIpxPStateEntry 3 } mscVrPpIpxPOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscVrPpIpxP 104 } mscVrPpIpxPOperStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPOperStatusTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPOperStatusTable 1 } MscVrPpIpxPOperStatusEntry ::= SEQUENCE { mscVrPpIpxPSnmpOperStatus INTEGER } mscVrPpIpxPSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscVrPpIpxPOperStatusEntry 1 } mscVrPpIpxPOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxPort Operational Attributes." ::= { mscVrPpIpxP 105 } mscVrPpIpxPOperEntry OBJECT-TYPE SYNTAX MscVrPpIpxPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPOperTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPOperTable 1 } MscVrPpIpxPOperEntry ::= SEQUENCE { mscVrPpIpxPType INTEGER, mscVrPpIpxPEncapsulation INTEGER, mscVrPpIpxPNetworkNumber DashedHexString, mscVrPpIpxPNode DashedHexString } mscVrPpIpxPType OBJECT-TYPE SYNTAX INTEGER { other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer." ::= { mscVrPpIpxPOperEntry 1 } mscVrPpIpxPEncapsulation OBJECT-TYPE SYNTAX INTEGER { link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX encapsulation type for Ethernet and FrDte media types. 3. novell: IPX encapsulation type for Ethernet and FrDte media types. 4. sap: IPX encapsulation type for FDDI, Token Ring, Ethernet and FrDte media types. 5. snap: IPX encapsulation type for FDDI, Token Ring, Ethernet, and FrDte media types. 6. vns: IPX encapsulation type for VNS media type. 7. tunnel: IPX encapsulation type for Tunnel media type." ::= { mscVrPpIpxPOperEntry 2 } mscVrPpIpxPNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The Ipx network number from the provisioned networkNumberProv value." ::= { mscVrPpIpxPOperEntry 3 } mscVrPpIpxPNode OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The Ipx node address of this IpxPort." ::= { mscVrPpIpxPOperEntry 4 } mscVrPpIpxPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxPort Statistics group." ::= { mscVrPpIpxP 106 } mscVrPpIpxPStatsEntry OBJECT-TYPE SYNTAX MscVrPpIpxPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPStatsTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex } ::= { mscVrPpIpxPStatsTable 1 } MscVrPpIpxPStatsEntry ::= SEQUENCE { mscVrPpIpxPStateChanges Counter32, mscVrPpIpxPInReceives Counter32, mscVrPpIpxPForwarded Counter32 } mscVrPpIpxPStateChanges OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPStatsEntry 1 } mscVrPpIpxPInReceives OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPStatsEntry 2 } mscVrPpIpxPForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPStatsEntry 3 } -- Vr/ PP/ IpxP RipP -- The RIP specific information pertaining to this IpxPort component. mscVrPpIpxPRipP OBJECT IDENTIFIER ::= { mscVrPpIpxP 2 } mscVrPpIpxPRipPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPRipPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrPpIpxPRipP components." ::= { mscVrPpIpxPRipP 1 } mscVrPpIpxPRipPRowStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPRipPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrPpIpxPRipP component." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPRipPIndex } ::= { mscVrPpIpxPRipPRowStatusTable 1 } MscVrPpIpxPRipPRowStatusEntry ::= SEQUENCE { mscVrPpIpxPRipPRowStatus RowStatus, mscVrPpIpxPRipPComponentName DisplayString, mscVrPpIpxPRipPStorageType StorageType, mscVrPpIpxPRipPIndex NonReplicated } mscVrPpIpxPRipPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrPpIpxPRipP components. These components cannot be added nor deleted." ::= { mscVrPpIpxPRipPRowStatusEntry 1 } mscVrPpIpxPRipPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrPpIpxPRipPRowStatusEntry 2 } mscVrPpIpxPRipPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrPpIpxPRipP tables." ::= { mscVrPpIpxPRipPRowStatusEntry 4 } mscVrPpIpxPRipPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrPpIpxPRipP tables." ::= { mscVrPpIpxPRipPRowStatusEntry 10 } mscVrPpIpxPRipPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPRipPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "RIP specific statistics for this IpxPort." ::= { mscVrPpIpxPRipP 10 } mscVrPpIpxPRipPStatsEntry OBJECT-TYPE SYNTAX MscVrPpIpxPRipPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPRipPStatsTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPRipPIndex } ::= { mscVrPpIpxPRipPStatsTable 1 } MscVrPpIpxPRipPStatsEntry ::= SEQUENCE { mscVrPpIpxPRipPInPackets Counter32, mscVrPpIpxPRipPInRequests Counter32, mscVrPpIpxPRipPInResponses Counter32, mscVrPpIpxPRipPOutPackets Counter32, mscVrPpIpxPRipPOutRequests Counter32, mscVrPpIpxPRipPOutResponses Counter32, mscVrPpIpxPRipPIncorrectPackets Counter32 } mscVrPpIpxPRipPInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 1 } mscVrPpIpxPRipPInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 2 } mscVrPpIpxPRipPInResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 3 } mscVrPpIpxPRipPOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 4 } mscVrPpIpxPRipPOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 5 } mscVrPpIpxPRipPOutResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 6 } mscVrPpIpxPRipPIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPRipPStatsEntry 7 } -- Vr/ PP/ IpxP SapP -- The SAP specific information pertaining to this IpxPort component. mscVrPpIpxPSapP OBJECT IDENTIFIER ::= { mscVrPpIpxP 3 } mscVrPpIpxPSapPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPSapPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrPpIpxPSapP components." ::= { mscVrPpIpxPSapP 1 } mscVrPpIpxPSapPRowStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPSapPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrPpIpxPSapP component." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPSapPIndex } ::= { mscVrPpIpxPSapPRowStatusTable 1 } MscVrPpIpxPSapPRowStatusEntry ::= SEQUENCE { mscVrPpIpxPSapPRowStatus RowStatus, mscVrPpIpxPSapPComponentName DisplayString, mscVrPpIpxPSapPStorageType StorageType, mscVrPpIpxPSapPIndex NonReplicated } mscVrPpIpxPSapPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrPpIpxPSapP components. These components cannot be added nor deleted." ::= { mscVrPpIpxPSapPRowStatusEntry 1 } mscVrPpIpxPSapPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrPpIpxPSapPRowStatusEntry 2 } mscVrPpIpxPSapPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrPpIpxPSapP tables." ::= { mscVrPpIpxPSapPRowStatusEntry 4 } mscVrPpIpxPSapPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrPpIpxPSapP tables." ::= { mscVrPpIpxPSapPRowStatusEntry 10 } mscVrPpIpxPSapPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPSapPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SAP specific statistics for this IpxPort." ::= { mscVrPpIpxPSapP 10 } mscVrPpIpxPSapPStatsEntry OBJECT-TYPE SYNTAX MscVrPpIpxPSapPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPSapPStatsTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPSapPIndex } ::= { mscVrPpIpxPSapPStatsTable 1 } MscVrPpIpxPSapPStatsEntry ::= SEQUENCE { mscVrPpIpxPSapPInPackets Counter32, mscVrPpIpxPSapPInRequests Counter32, mscVrPpIpxPSapPInResponses Counter32, mscVrPpIpxPSapPOutPackets Counter32, mscVrPpIpxPSapPOutRequests Counter32, mscVrPpIpxPSapPOutResponses Counter32, mscVrPpIpxPSapPIncorrectPackets Counter32 } mscVrPpIpxPSapPInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 1 } mscVrPpIpxPSapPInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 2 } mscVrPpIpxPSapPInResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 3 } mscVrPpIpxPSapPOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 4 } mscVrPpIpxPSapPOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 5 } mscVrPpIpxPSapPOutResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 6 } mscVrPpIpxPSapPIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrPpIpxPSapPStatsEntry 7 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ PP/ IpxP IWP -- This component contains information for this IpxPort that are specific to -- the IPXWAN protocol. mscVrPpIpxPIWP OBJECT IDENTIFIER ::= { mscVrPpIpxP 4 } mscVrPpIpxPIWPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPIWPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrPpIpxPIWP components." ::= { mscVrPpIpxPIWP 1 } mscVrPpIpxPIWPRowStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPIWPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrPpIpxPIWP component." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPIWPRemoteStationIdentifierIndex } ::= { mscVrPpIpxPIWPRowStatusTable 1 } MscVrPpIpxPIWPRowStatusEntry ::= SEQUENCE { mscVrPpIpxPIWPRowStatus RowStatus, mscVrPpIpxPIWPComponentName DisplayString, mscVrPpIpxPIWPStorageType StorageType, mscVrPpIpxPIWPRemoteStationIdentifierIndex DashedHexString } mscVrPpIpxPIWPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrPpIpxPIWP components. These components cannot be added nor deleted." ::= { mscVrPpIpxPIWPRowStatusEntry 1 } mscVrPpIpxPIWPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrPpIpxPIWPRowStatusEntry 2 } mscVrPpIpxPIWPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrPpIpxPIWP tables." ::= { mscVrPpIpxPIWPRowStatusEntry 4 } mscVrPpIpxPIWPRemoteStationIdentifierIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrPpIpxPIWP tables." ::= { mscVrPpIpxPIWPRowStatusEntry 10 } mscVrPpIpxPIWPOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPIWPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains operational attributes that are specific for the IPXWAN protocol." ::= { mscVrPpIpxPIWP 10 } mscVrPpIpxPIWPOperEntry OBJECT-TYPE SYNTAX MscVrPpIpxPIWPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPIWPOperTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPIWPRemoteStationIdentifierIndex } ::= { mscVrPpIpxPIWPOperTable 1 } MscVrPpIpxPIWPOperEntry ::= SEQUENCE { mscVrPpIpxPIWPNeighbourRouterName AsciiString, mscVrPpIpxPIWPNeighbourInternalNetworkNumber DashedHexString, mscVrPpIpxPIWPInitFails Counter32 } mscVrPpIpxPIWPNeighbourRouterName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the neighboring router on a WAN circuit." ::= { mscVrPpIpxPIWPOperEntry 1 } mscVrPpIpxPIWPNeighbourInternalNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The internal network number of the neighboring router on a WAN circuit." ::= { mscVrPpIpxPIWPOperEntry 2 } mscVrPpIpxPIWPInitFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295" ::= { mscVrPpIpxPIWPOperEntry 3 } -- Vr/ Pp/ IpxP NetSentryPort -- This component contains the NetSentry attributes that specify the names -- of the NetSentry filters which will be applied to IPX packets as -- incoming and outgoing filters. mscVrPpIpxPNetSentryP OBJECT IDENTIFIER ::= { mscVrPpIpxP 5 } mscVrPpIpxPNetSentryPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPNetSentryPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrPpIpxPNetSentryP components." ::= { mscVrPpIpxPNetSentryP 1 } mscVrPpIpxPNetSentryPRowStatusEntry OBJECT-TYPE SYNTAX MscVrPpIpxPNetSentryPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrPpIpxPNetSentryP component." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPNetSentryPIndex } ::= { mscVrPpIpxPNetSentryPRowStatusTable 1 } MscVrPpIpxPNetSentryPRowStatusEntry ::= SEQUENCE { mscVrPpIpxPNetSentryPRowStatus RowStatus, mscVrPpIpxPNetSentryPComponentName DisplayString, mscVrPpIpxPNetSentryPStorageType StorageType, mscVrPpIpxPNetSentryPIndex NonReplicated } mscVrPpIpxPNetSentryPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrPpIpxPNetSentryP components. These components can be added and deleted." ::= { mscVrPpIpxPNetSentryPRowStatusEntry 1 } mscVrPpIpxPNetSentryPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrPpIpxPNetSentryPRowStatusEntry 2 } mscVrPpIpxPNetSentryPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrPpIpxPNetSentryP tables." ::= { mscVrPpIpxPNetSentryPRowStatusEntry 4 } mscVrPpIpxPNetSentryPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrPpIpxPNetSentryP tables." ::= { mscVrPpIpxPNetSentryPRowStatusEntry 10 } mscVrPpIpxPNetSentryPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrPpIpxPNetSentryPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters." ::= { mscVrPpIpxPNetSentryP 10 } mscVrPpIpxPNetSentryPProvEntry OBJECT-TYPE SYNTAX MscVrPpIpxPNetSentryPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrPpIpxPNetSentryPProvTable." INDEX { mscVrIndex, mscVrPpIndex, mscVrPpIpxPIndex, mscVrPpIpxPNetSentryPIndex } ::= { mscVrPpIpxPNetSentryPProvTable 1 } MscVrPpIpxPNetSentryPProvEntry ::= SEQUENCE { mscVrPpIpxPNetSentryPInComingFilter AsciiString, mscVrPpIpxPNetSentryPOutGoingFilter AsciiString } mscVrPpIpxPNetSentryPInComingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port." ::= { mscVrPpIpxPNetSentryPProvEntry 1 } mscVrPpIpxPNetSentryPOutGoingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the filter applied to outgoing IPX packets on this port." ::= { mscVrPpIpxPNetSentryPProvEntry 2 } -- Vr/ Ipx -- This component provides for routing of Novell IPX packets in Novell's -- NetWare environment. mscVrIpx OBJECT IDENTIFIER ::= { mscVr 7 } mscVrIpxRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpx components." ::= { mscVrIpx 1 } mscVrIpxRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpx component." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxRowStatusTable 1 } MscVrIpxRowStatusEntry ::= SEQUENCE { mscVrIpxRowStatus RowStatus, mscVrIpxComponentName DisplayString, mscVrIpxStorageType StorageType, mscVrIpxIndex NonReplicated } mscVrIpxRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpx components. These components can be added and deleted." ::= { mscVrIpxRowStatusEntry 1 } mscVrIpxComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxRowStatusEntry 2 } mscVrIpxStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpx tables." ::= { mscVrIpxRowStatusEntry 4 } mscVrIpxIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpx tables." ::= { mscVrIpxRowStatusEntry 10 } mscVrIpxAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { mscVrIpx 100 } mscVrIpxAdminControlEntry OBJECT-TYPE SYNTAX MscVrIpxAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxAdminControlTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxAdminControlTable 1 } MscVrIpxAdminControlEntry ::= SEQUENCE { mscVrIpxSnmpAdminStatus INTEGER } mscVrIpxSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscVrIpxAdminControlEntry 1 } mscVrIpxProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX system provisionable attributes." ::= { mscVrIpx 101 } mscVrIpxProvEntry OBJECT-TYPE SYNTAX MscVrIpxProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxProvTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxProvTable 1 } MscVrIpxProvEntry ::= SEQUENCE { mscVrIpxNetworkNumber DashedHexString, mscVrIpxMaxPathSplits Unsigned32, mscVrIpxMaxHops Unsigned32, mscVrIpxRipUpdateInterval Unsigned32, mscVrIpxSapUpdateInterval Unsigned32, mscVrIpxControlDelay Unsigned32, mscVrIpxUpdateDelay Unsigned32, mscVrIpxRipAgeMultiplier Unsigned32, mscVrIpxSapAgeMultiplier Unsigned32, mscVrIpxDamping INTEGER, mscVrIpxRipMaxDampedGeneralRequests Unsigned32, mscVrIpxRipMaxDampedSpecificRequests Unsigned32, mscVrIpxSapMaxDampedGeneralRequests Unsigned32, mscVrIpxSapMaxDampedSpecificRequests Unsigned32, mscVrIpxInitialGeneralRequests INTEGER, mscVrIpxHoldDownInterval Unsigned32 } mscVrIpxNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations." ::= { mscVrIpxProvEntry 1 } mscVrIpxMaxPathSplits OBJECT-TYPE SYNTAX Unsigned32 (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets." DEFVAL { 1 } ::= { mscVrIpxProvEntry 2 } mscVrIpxMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of hops a packet may take." DEFVAL { 16 } ::= { mscVrIpxProvEntry 3 } mscVrIpxRipUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The RIP periodic update interval, in seconds." DEFVAL { 60 } ::= { mscVrIpxProvEntry 4 } mscVrIpxSapUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The SAP periodic update interval, in seconds." DEFVAL { 60 } ::= { mscVrIpxProvEntry 5 } mscVrIpxControlDelay OBJECT-TYPE SYNTAX Unsigned32 (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing the controlDelay." DEFVAL { 1 } ::= { mscVrIpxProvEntry 6 } mscVrIpxUpdateDelay OBJECT-TYPE SYNTAX Unsigned32 (55..500) ACCESS read-write STATUS mandatory DESCRIPTION "The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification." DEFVAL { 55 } ::= { mscVrIpxProvEntry 7 } mscVrIpxRipAgeMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "After this many Rip Update intervals unrefreshed Rip information is considered expired." DEFVAL { 3 } ::= { mscVrIpxProvEntry 8 } mscVrIpxSapAgeMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "After this many SAP Update intervals unrefreshed SAP information is considered expired." DEFVAL { 3 } ::= { mscVrIpxProvEntry 9 } mscVrIpxDamping OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests." DEFVAL { enabled } ::= { mscVrIpxProvEntry 10 } mscVrIpxRipMaxDampedGeneralRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneralRequests are responded to and the remainder are ignored." DEFVAL { 1 } ::= { mscVrIpxProvEntry 11 } mscVrIpxRipMaxDampedSpecificRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecificRequests are responded to and the remainder are ignored." DEFVAL { 4 } ::= { mscVrIpxProvEntry 12 } mscVrIpxSapMaxDampedGeneralRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneralRequests are responded to and the remainder are ignored." DEFVAL { 1 } ::= { mscVrIpxProvEntry 13 } mscVrIpxSapMaxDampedSpecificRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecificRequests are responded to and the remainder are ignored." DEFVAL { 4 } ::= { mscVrIpxProvEntry 14 } mscVrIpxInitialGeneralRequests OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port." DEFVAL { enabled } ::= { mscVrIpxProvEntry 15 } mscVrIpxHoldDownInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that receive late network down broadcasts advertise false routes." DEFVAL { 10 } ::= { mscVrIpxProvEntry 16 } mscVrIpxStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscVrIpx 103 } mscVrIpxStateEntry OBJECT-TYPE SYNTAX MscVrIpxStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxStateTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxStateTable 1 } MscVrIpxStateEntry ::= SEQUENCE { mscVrIpxAdminState INTEGER, mscVrIpxOperationalState INTEGER, mscVrIpxUsageState INTEGER } mscVrIpxAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscVrIpxStateEntry 1 } mscVrIpxOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscVrIpxStateEntry 2 } mscVrIpxUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscVrIpxStateEntry 3 } mscVrIpxOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscVrIpx 104 } mscVrIpxOperStatusEntry OBJECT-TYPE SYNTAX MscVrIpxOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxOperStatusTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxOperStatusTable 1 } MscVrIpxOperStatusEntry ::= SEQUENCE { mscVrIpxSnmpOperStatus INTEGER } mscVrIpxSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscVrIpxOperStatusEntry 1 } mscVrIpxOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains IPX related operational attributes." ::= { mscVrIpx 105 } mscVrIpxOperEntry OBJECT-TYPE SYNTAX MscVrIpxOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxOperTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxOperTable 1 } MscVrIpxOperEntry ::= SEQUENCE { mscVrIpxProtocolPortCount Unsigned32, mscVrIpxDestinationCount Unsigned32, mscVrIpxServicesCount Unsigned32 } mscVrIpxProtocolPortCount OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of portsknown to this instance of Ipx." DEFVAL { 0 } ::= { mscVrIpxOperEntry 1 } mscVrIpxDestinationCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently reachable destinations known to Ipx." DEFVAL { 65535 } ::= { mscVrIpxOperEntry 2 } mscVrIpxServicesCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of Services known to Ipx." DEFVAL { 65535 } ::= { mscVrIpxOperEntry 3 } mscVrIpxStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains IPX related statistics on the CP." ::= { mscVrIpx 107 } mscVrIpxStatsEntry OBJECT-TYPE SYNTAX MscVrIpxStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxStatsTable." INDEX { mscVrIndex, mscVrIpxIndex } ::= { mscVrIpxStatsTable 1 } MscVrIpxStatsEntry ::= SEQUENCE { mscVrIpxInReceives Counter32, mscVrIpxInHeaderErrors Counter32, mscVrIpxInUnknownSocket Counter32, mscVrIpxInDiscards Counter32, mscVrIpxInBadChecksums Counter32, mscVrIpxInDelivers Counter32, mscVrIpxNoRoutes Counter32, mscVrIpxOutRequests Counter32, mscVrIpxOutMalformedRequests Counter32, mscVrIpxOutDiscards Counter32, mscVrIpxOutPackets Counter32, mscVrIpxInTooManyHops Counter32, mscVrIpxInFiltered Counter32, mscVrIpxInNetBIOS Counter32, mscVrIpxForwarded Counter32, mscVrIpxOutFiltered Counter32 } mscVrIpxInReceives OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 1 } mscVrIpxInHeaderErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 2 } mscVrIpxInUnknownSocket OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 3 } mscVrIpxInDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 4 } mscVrIpxInBadChecksums OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 5 } mscVrIpxInDelivers OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 6 } mscVrIpxNoRoutes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 7 } mscVrIpxOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 8 } mscVrIpxOutMalformedRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 9 } mscVrIpxOutDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 10 } mscVrIpxOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 11 } mscVrIpxInTooManyHops OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 12 } mscVrIpxInFiltered OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 13 } mscVrIpxInNetBIOS OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 14 } mscVrIpxForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 15 } mscVrIpxOutFiltered OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxStatsEntry 16 } -- Vr/ Ipx Rip -- The Routing Information Protocol (RIP) exchanges IPX route -- information that is used to maintain the routing table. Routing -- information is added to the route table for all known networks whose -- hops count is equal to or less than the value provisioned for maxHops, -- and is propagated for networks less than maxHops away. mscVrIpxRip OBJECT IDENTIFIER ::= { mscVrIpx 2 } mscVrIpxRipRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxRip components." ::= { mscVrIpxRip 1 } mscVrIpxRipRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxRip component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex } ::= { mscVrIpxRipRowStatusTable 1 } MscVrIpxRipRowStatusEntry ::= SEQUENCE { mscVrIpxRipRowStatus RowStatus, mscVrIpxRipComponentName DisplayString, mscVrIpxRipStorageType StorageType, mscVrIpxRipIndex NonReplicated } mscVrIpxRipRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxRip components. These components cannot be added nor deleted." ::= { mscVrIpxRipRowStatusEntry 1 } mscVrIpxRipComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxRipRowStatusEntry 2 } mscVrIpxRipStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxRip tables." ::= { mscVrIpxRipRowStatusEntry 4 } mscVrIpxRipIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxRip tables." ::= { mscVrIpxRipRowStatusEntry 10 } mscVrIpxRipStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX statistics related to the RIP protocol." ::= { mscVrIpxRip 10 } mscVrIpxRipStatsEntry OBJECT-TYPE SYNTAX MscVrIpxRipStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxRipStatsTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex } ::= { mscVrIpxRipStatsTable 1 } MscVrIpxRipStatsEntry ::= SEQUENCE { mscVrIpxRipRipIn Counter32, mscVrIpxRipRipOut Counter32, mscVrIpxRipRipIncorrectPackets Counter32 } mscVrIpxRipRipIn OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxRipStatsEntry 1 } mscVrIpxRipRipOut OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxRipStatsEntry 2 } mscVrIpxRipRipIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxRipStatsEntry 3 } -- Vr/ Ipx Rip RipFilter -- RIP filters remove the specified service advertisements from RIP packets -- passing through this IPX router instance thereby filtering knowledge of -- those network routes. This is done by telling the router to ignore certain -- advertised networks present in incoming RIP packet tuples and/or omit -- certain networks from outgoing RIP packet advertisements. The -- networks are indicated by the attributes hops, ticks, networkNumber, -- node and port. For a given filter, networks matching all the attributes of -- that filter are filtered or passed depending on the disposition of the filter. -- RIP filters are applied as input or output filters via the RipApplyEntry -- component. mscVrIpxRipRFltr OBJECT IDENTIFIER ::= { mscVrIpxRip 2 } mscVrIpxRipRFltrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxRipRFltr components." ::= { mscVrIpxRipRFltr 1 } mscVrIpxRipRFltrRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxRipRFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxRipRFltr component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex, mscVrIpxRipRFltrIdentifierIndex } ::= { mscVrIpxRipRFltrRowStatusTable 1 } MscVrIpxRipRFltrRowStatusEntry ::= SEQUENCE { mscVrIpxRipRFltrRowStatus RowStatus, mscVrIpxRipRFltrComponentName DisplayString, mscVrIpxRipRFltrStorageType StorageType, mscVrIpxRipRFltrIdentifierIndex Integer32 } mscVrIpxRipRFltrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxRipRFltr components. These components can be added and deleted." ::= { mscVrIpxRipRFltrRowStatusEntry 1 } mscVrIpxRipRFltrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxRipRFltrRowStatusEntry 2 } mscVrIpxRipRFltrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxRipRFltr tables." ::= { mscVrIpxRipRFltrRowStatusEntry 4 } mscVrIpxRipRFltrIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxRipRFltr tables." ::= { mscVrIpxRipRFltrRowStatusEntry 10 } mscVrIpxRipRFltrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the provisionable attribute group for RipFilter." ::= { mscVrIpxRipRFltr 10 } mscVrIpxRipRFltrProvEntry OBJECT-TYPE SYNTAX MscVrIpxRipRFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxRipRFltrProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex, mscVrIpxRipRFltrIdentifierIndex } ::= { mscVrIpxRipRFltrProvTable 1 } MscVrIpxRipRFltrProvEntry ::= SEQUENCE { mscVrIpxRipRFltrHops AsciiString, mscVrIpxRipRFltrTicks AsciiString, mscVrIpxRipRFltrNetworkNumber AsciiString, mscVrIpxRipRFltrNode AsciiString, mscVrIpxRipRFltrPort AsciiString, mscVrIpxRipRFltrDisposition INTEGER } mscVrIpxRipRFltrHops OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999." ::= { mscVrIpxRipRFltrProvEntry 1 } mscVrIpxRipRFltrTicks OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value preceded by a equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, greater or lower delay, respectively, away from the switch than the ticks value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The ticks value is specified as a decimal number between 0 and 999." ::= { mscVrIpxRipRFltrProvEntry 2 } mscVrIpxRipRFltrNetworkNumber OBJECT-TYPE SYNTAX AsciiString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid network number would be ff-ff-ff-?? or ffffff??). Wildcard characters may be used only in pairs to replace a pair of hex digits. Filters with a network number preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for the tuples with this network number. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { mscVrIpxRipRFltrProvEntry 3 } mscVrIpxRipRFltrNode OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the input direction and will be ignored if the filter is applied in the output direction.The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid node number would be 00-20-??-??-??-?? or 0020???????? ). Wildcard characters may be used only in pairs to replace a pair of hex digits. A node number preceded by a caret (^) should be interpreted as matching all RIP packets' network tuples except for the RIP packets with this source node address. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { mscVrIpxRipRFltrProvEntry 4 } mscVrIpxRipRFltrPort OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { mscVrIpxRipRFltrProvEntry 5 } mscVrIpxRipRFltrDisposition OBJECT-TYPE SYNTAX INTEGER { pass(1), filter(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered." DEFVAL { filter } ::= { mscVrIpxRipRFltrProvEntry 6 } mscVrIpxRipRFltrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the operational attribute group for IpxRipFilter." ::= { mscVrIpxRipRFltr 11 } mscVrIpxRipRFltrOperEntry OBJECT-TYPE SYNTAX MscVrIpxRipRFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxRipRFltrOperTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex, mscVrIpxRipRFltrIdentifierIndex } ::= { mscVrIpxRipRFltrOperTable 1 } MscVrIpxRipRFltrOperEntry ::= SEQUENCE { mscVrIpxRipRFltrNumberOfApplyEntries Gauge32 } mscVrIpxRipRFltrNumberOfApplyEntries OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports." DEFVAL { 0 } ::= { mscVrIpxRipRFltrOperEntry 1 } -- Vr/ Ipx Rip RipFilter RipApplyEntry/ -- This component contains a list of RIP filters that have been applied to -- each IPX port and information pertaining to each application of such -- RIP filters. Filters should be applied to ports such that the most specific -- filter has the lowest identifier while the least specific filter has the -- highest identifier. It should be kept in mind that the filter with the lowest -- filter identifier that matches will decide based on its disposition whether -- the network tuple is passed or filtered. mscVrIpxRipRipApp OBJECT IDENTIFIER ::= { mscVrIpxRip 3 } mscVrIpxRipRipAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRipAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxRipRipApp components." ::= { mscVrIpxRipRipApp 1 } mscVrIpxRipRipAppRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxRipRipAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxRipRipApp component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex, mscVrIpxRipRipAppProtocolPortNameIndex, mscVrIpxRipRipAppFilterIdentifierIndex } ::= { mscVrIpxRipRipAppRowStatusTable 1 } MscVrIpxRipRipAppRowStatusEntry ::= SEQUENCE { mscVrIpxRipRipAppRowStatus RowStatus, mscVrIpxRipRipAppComponentName DisplayString, mscVrIpxRipRipAppStorageType StorageType, mscVrIpxRipRipAppProtocolPortNameIndex AsciiStringIndex, mscVrIpxRipRipAppFilterIdentifierIndex Integer32 } mscVrIpxRipRipAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxRipRipApp components. These components can be added and deleted." ::= { mscVrIpxRipRipAppRowStatusEntry 1 } mscVrIpxRipRipAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxRipRipAppRowStatusEntry 2 } mscVrIpxRipRipAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxRipRipApp tables." ::= { mscVrIpxRipRipAppRowStatusEntry 4 } mscVrIpxRipRipAppProtocolPortNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxRipRipApp tables." ::= { mscVrIpxRipRipAppRowStatusEntry 10 } mscVrIpxRipRipAppFilterIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxRipRipApp tables." ::= { mscVrIpxRipRipAppRowStatusEntry 11 } mscVrIpxRipRipAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxRipRipAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the RipApplyEntry provisionable group of attributes." ::= { mscVrIpxRipRipApp 10 } mscVrIpxRipRipAppProvEntry OBJECT-TYPE SYNTAX MscVrIpxRipRipAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxRipRipAppProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxRipIndex, mscVrIpxRipRipAppProtocolPortNameIndex, mscVrIpxRipRipAppFilterIdentifierIndex } ::= { mscVrIpxRipRipAppProvTable 1 } MscVrIpxRipRipAppProvEntry ::= SEQUENCE { mscVrIpxRipRipAppDirection INTEGER } mscVrIpxRipRipAppDirection OBJECT-TYPE SYNTAX INTEGER { none(0), output(1), input(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction." DEFVAL { none } ::= { mscVrIpxRipRipAppProvEntry 1 } -- Vr/ Ipx Sap -- The Service Advertising Protocol (SAP) exchanges information on the -- network about available network services (for example file services or -- print services). Service information is kept for services residing on -- networks which are known to the router via the routing table (RIP -- protocol). That is, services will be added to the services table only if a -- route to them has been previously discovered via RIP and entered in the -- route table. mscVrIpxSap OBJECT IDENTIFIER ::= { mscVrIpx 3 } mscVrIpxSapRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxSap components." ::= { mscVrIpxSap 1 } mscVrIpxSapRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxSapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxSap component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex } ::= { mscVrIpxSapRowStatusTable 1 } MscVrIpxSapRowStatusEntry ::= SEQUENCE { mscVrIpxSapRowStatus RowStatus, mscVrIpxSapComponentName DisplayString, mscVrIpxSapStorageType StorageType, mscVrIpxSapIndex NonReplicated } mscVrIpxSapRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxSap components. These components cannot be added nor deleted." ::= { mscVrIpxSapRowStatusEntry 1 } mscVrIpxSapComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxSapRowStatusEntry 2 } mscVrIpxSapStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxSap tables." ::= { mscVrIpxSapRowStatusEntry 4 } mscVrIpxSapIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxSap tables." ::= { mscVrIpxSapRowStatusEntry 10 } mscVrIpxSapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX statistics specific to the SAP protocol." ::= { mscVrIpxSap 10 } mscVrIpxSapStatsEntry OBJECT-TYPE SYNTAX MscVrIpxSapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxSapStatsTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex } ::= { mscVrIpxSapStatsTable 1 } MscVrIpxSapStatsEntry ::= SEQUENCE { mscVrIpxSapSapIn Counter32, mscVrIpxSapSapOut Counter32, mscVrIpxSapSapIncorrectPackets Counter32 } mscVrIpxSapSapIn OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxSapStatsEntry 1 } mscVrIpxSapSapOut OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxSapStatsEntry 2 } mscVrIpxSapSapIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { mscVrIpxSapStatsEntry 3 } -- Vr/ Ipx Sap Sfltr -- SAP filters remove the specified service advertisements from SAP -- packets passing through this IPX router instance thereby filtering -- knowledge of those services. This is done by telling the router to ignore -- certain advertised services present in incoming SAP packet tuples and/or -- omit certain services from outgoing SAP packet advertisements. The -- services are indicated by the attributes type, name, networkNumber, and -- node. For a given filter, services matching all the attributes of that filter -- are filtered. SAP filters are applied as input or output filters via the -- IpxSapApplyEntry component. mscVrIpxSapSFltr OBJECT IDENTIFIER ::= { mscVrIpxSap 2 } mscVrIpxSapSFltrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapSFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxSapSFltr components." ::= { mscVrIpxSapSFltr 1 } mscVrIpxSapSFltrRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxSapSFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxSapSFltr component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex, mscVrIpxSapSFltrIdentifierIndex } ::= { mscVrIpxSapSFltrRowStatusTable 1 } MscVrIpxSapSFltrRowStatusEntry ::= SEQUENCE { mscVrIpxSapSFltrRowStatus RowStatus, mscVrIpxSapSFltrComponentName DisplayString, mscVrIpxSapSFltrStorageType StorageType, mscVrIpxSapSFltrIdentifierIndex Integer32 } mscVrIpxSapSFltrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxSapSFltr components. These components can be added and deleted." ::= { mscVrIpxSapSFltrRowStatusEntry 1 } mscVrIpxSapSFltrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxSapSFltrRowStatusEntry 2 } mscVrIpxSapSFltrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxSapSFltr tables." ::= { mscVrIpxSapSFltrRowStatusEntry 4 } mscVrIpxSapSFltrIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxSapSFltr tables." ::= { mscVrIpxSapSFltrRowStatusEntry 10 } mscVrIpxSapSFltrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapSFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The provisionable attribute group for SapFilter." ::= { mscVrIpxSapSFltr 10 } mscVrIpxSapSFltrProvEntry OBJECT-TYPE SYNTAX MscVrIpxSapSFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxSapSFltrProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex, mscVrIpxSapSFltrIdentifierIndex } ::= { mscVrIpxSapSFltrProvTable 1 } MscVrIpxSapSFltrProvEntry ::= SEQUENCE { mscVrIpxSapSFltrType AsciiString, mscVrIpxSapSFltrName AsciiString, mscVrIpxSapSFltrNetworkNumber AsciiString, mscVrIpxSapSFltrNode AsciiString, mscVrIpxSapSFltrDisposition INTEGER } mscVrIpxSapSFltrType OBJECT-TYPE SYNTAX AsciiString (SIZE (0..6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For example a valid type would be ff-ff or ffff). A type preceded by a caret(^) should be interpreted as filtering all SAP packets except for those with this type." ::= { mscVrIpxSapSFltrProvEntry 1 } mscVrIpxSapSFltrName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..48)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this name." ::= { mscVrIpxSapSFltrProvEntry 2 } mscVrIpxSapSFltrNetworkNumber OBJECT-TYPE SYNTAX AsciiString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). A network number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this network number." ::= { mscVrIpxSapSFltrProvEntry 3 } mscVrIpxSapSFltrNode OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits.. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). A node number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this node number." ::= { mscVrIpxSapSFltrProvEntry 4 } mscVrIpxSapSFltrDisposition OBJECT-TYPE SYNTAX INTEGER { pass(1), filter(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates a reversal of the filter pattern match." DEFVAL { filter } ::= { mscVrIpxSapSFltrProvEntry 5 } mscVrIpxSapSFltrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapSFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The operational attribute group for IpxSapFilter." ::= { mscVrIpxSapSFltr 11 } mscVrIpxSapSFltrOperEntry OBJECT-TYPE SYNTAX MscVrIpxSapSFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxSapSFltrOperTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex, mscVrIpxSapSFltrIdentifierIndex } ::= { mscVrIpxSapSFltrOperTable 1 } MscVrIpxSapSFltrOperEntry ::= SEQUENCE { mscVrIpxSapSFltrNumberOfApplyEntries Gauge32 } mscVrIpxSapSFltrNumberOfApplyEntries OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports." DEFVAL { 0 } ::= { mscVrIpxSapSFltrOperEntry 1 } -- Vr/ Ipx Sap SapApp -- This component contains a list of SAP filters that have been applied to -- each IPX port and information pertaining to each application of such -- SAP filters. mscVrIpxSapSapApp OBJECT IDENTIFIER ::= { mscVrIpxSap 3 } mscVrIpxSapSapAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapSapAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxSapSapApp components." ::= { mscVrIpxSapSapApp 1 } mscVrIpxSapSapAppRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxSapSapAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxSapSapApp component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex, mscVrIpxSapSapAppProtocolPortNameIndex, mscVrIpxSapSapAppFilterIdentifierIndex } ::= { mscVrIpxSapSapAppRowStatusTable 1 } MscVrIpxSapSapAppRowStatusEntry ::= SEQUENCE { mscVrIpxSapSapAppRowStatus RowStatus, mscVrIpxSapSapAppComponentName DisplayString, mscVrIpxSapSapAppStorageType StorageType, mscVrIpxSapSapAppProtocolPortNameIndex AsciiStringIndex, mscVrIpxSapSapAppFilterIdentifierIndex Integer32 } mscVrIpxSapSapAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxSapSapApp components. These components can be added and deleted." ::= { mscVrIpxSapSapAppRowStatusEntry 1 } mscVrIpxSapSapAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxSapSapAppRowStatusEntry 2 } mscVrIpxSapSapAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxSapSapApp tables." ::= { mscVrIpxSapSapAppRowStatusEntry 4 } mscVrIpxSapSapAppProtocolPortNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSapSapApp tables." ::= { mscVrIpxSapSapAppRowStatusEntry 10 } mscVrIpxSapSapAppFilterIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSapSapApp tables." ::= { mscVrIpxSapSapAppRowStatusEntry 11 } mscVrIpxSapSapAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSapSapAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxSapApplyEntry provisionable group of attributes." ::= { mscVrIpxSapSapApp 10 } mscVrIpxSapSapAppProvEntry OBJECT-TYPE SYNTAX MscVrIpxSapSapAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxSapSapAppProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSapIndex, mscVrIpxSapSapAppProtocolPortNameIndex, mscVrIpxSapSapAppFilterIdentifierIndex } ::= { mscVrIpxSapSapAppProvTable 1 } MscVrIpxSapSapAppProvEntry ::= SEQUENCE { mscVrIpxSapSapAppDirection INTEGER } mscVrIpxSapSapAppDirection OBJECT-TYPE SYNTAX INTEGER { none(0), output(1), input(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this SAP filter is applied as an input filter or an output filter." DEFVAL { none } ::= { mscVrIpxSapSapAppProvEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Fwd -- The forwarding component represents an entry of the forwarding table. -- It contains forwarding information about all known destinations with -- each entry in the forwarding table being information pertaining to a -- unique IPX destination network number. mscVrIpxFwd OBJECT IDENTIFIER ::= { mscVrIpx 4 } mscVrIpxFwdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxFwd components." ::= { mscVrIpxFwd 1 } mscVrIpxFwdRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxFwd component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxFwdNetworkNumberIndex } ::= { mscVrIpxFwdRowStatusTable 1 } MscVrIpxFwdRowStatusEntry ::= SEQUENCE { mscVrIpxFwdRowStatus RowStatus, mscVrIpxFwdComponentName DisplayString, mscVrIpxFwdStorageType StorageType, mscVrIpxFwdNetworkNumberIndex DashedHexString } mscVrIpxFwdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxFwd components. These components cannot be added nor deleted." ::= { mscVrIpxFwdRowStatusEntry 1 } mscVrIpxFwdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxFwdRowStatusEntry 2 } mscVrIpxFwdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxFwd tables." ::= { mscVrIpxFwdRowStatusEntry 4 } mscVrIpxFwdNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxFwd tables." ::= { mscVrIpxFwdRowStatusEntry 10 } mscVrIpxFwdOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** IpxForwarding operational attributes." ::= { mscVrIpxFwd 10 } mscVrIpxFwdOperEntry OBJECT-TYPE SYNTAX MscVrIpxFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxFwdOperTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxFwdNetworkNumberIndex } ::= { mscVrIpxFwdOperTable 1 } MscVrIpxFwdOperEntry ::= SEQUENCE { mscVrIpxFwdProtocol INTEGER, mscVrIpxFwdTicks Unsigned32, mscVrIpxFwdHopCount Gauge32, mscVrIpxFwdProtocolPortId AsciiString, mscVrIpxFwdNextHopPhysAddress PhysAddress, mscVrIpxFwdNextHopNetworkNumber DashedHexString } mscVrIpxFwdProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), rip(3), nlsp(4), static(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing protocol from which knowledge of this destination was obtained." ::= { mscVrIpxFwdOperEntry 1 } mscVrIpxFwdTicks OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The delay, in ticks, to reach this destination." ::= { mscVrIpxFwdOperEntry 2 } mscVrIpxFwdHopCount OBJECT-TYPE SYNTAX Gauge32 (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops required to reach this destination." ::= { mscVrIpxFwdOperEntry 3 } mscVrIpxFwdProtocolPortId OBJECT-TYPE SYNTAX AsciiString (SIZE (1..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the ProtocolPort used to reach the next hop." ::= { mscVrIpxFwdOperEntry 4 } mscVrIpxFwdNextHopPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of the next hop" ::= { mscVrIpxFwdOperEntry 5 } mscVrIpxFwdNextHopNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number of the next hop." ::= { mscVrIpxFwdOperEntry 6 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Srvc -- This is the top level component of the IPX services table, which is a list -- of the Novell services known to this IPX router instance. mscVrIpxSrvc OBJECT IDENTIFIER ::= { mscVrIpx 5 } mscVrIpxSrvcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSrvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxSrvc components." ::= { mscVrIpxSrvc 1 } mscVrIpxSrvcRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxSrvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxSrvc component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSrvcNetworkNumberIndex, mscVrIpxSrvcNodeIndex, mscVrIpxSrvcTypeIndex, mscVrIpxSrvcNameIndex } ::= { mscVrIpxSrvcRowStatusTable 1 } MscVrIpxSrvcRowStatusEntry ::= SEQUENCE { mscVrIpxSrvcRowStatus RowStatus, mscVrIpxSrvcComponentName DisplayString, mscVrIpxSrvcStorageType StorageType, mscVrIpxSrvcNetworkNumberIndex DashedHexString, mscVrIpxSrvcNodeIndex DashedHexString, mscVrIpxSrvcTypeIndex Integer32, mscVrIpxSrvcNameIndex AsciiStringIndex } mscVrIpxSrvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxSrvc components. These components cannot be added nor deleted." ::= { mscVrIpxSrvcRowStatusEntry 1 } mscVrIpxSrvcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxSrvcRowStatusEntry 2 } mscVrIpxSrvcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxSrvc tables." ::= { mscVrIpxSrvcRowStatusEntry 4 } mscVrIpxSrvcNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSrvc tables." ::= { mscVrIpxSrvcRowStatusEntry 10 } mscVrIpxSrvcNodeIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSrvc tables." ::= { mscVrIpxSrvcRowStatusEntry 11 } mscVrIpxSrvcTypeIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSrvc tables." ::= { mscVrIpxSrvcRowStatusEntry 12 } mscVrIpxSrvcNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..48)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxSrvc tables." ::= { mscVrIpxSrvcRowStatusEntry 13 } mscVrIpxSrvcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxSrvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Ipx Services Operational group." ::= { mscVrIpxSrvc 10 } mscVrIpxSrvcOperEntry OBJECT-TYPE SYNTAX MscVrIpxSrvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxSrvcOperTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxSrvcNetworkNumberIndex, mscVrIpxSrvcNodeIndex, mscVrIpxSrvcTypeIndex, mscVrIpxSrvcNameIndex } ::= { mscVrIpxSrvcOperTable 1 } MscVrIpxSrvcOperEntry ::= SEQUENCE { mscVrIpxSrvcSocket Hex, mscVrIpxSrvcProtocol INTEGER, mscVrIpxSrvcHopCount Gauge32 } mscVrIpxSrvcSocket OBJECT-TYPE SYNTAX Hex (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Socket at which the service is available" ::= { mscVrIpxSrvcOperEntry 1 } mscVrIpxSrvcProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), nlsp(4), static(5), sap(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol from which knowledge of this service was obtained." ::= { mscVrIpxSrvcOperEntry 2 } mscVrIpxSrvcHopCount OBJECT-TYPE SYNTAX Gauge32 (0..64) ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to the service." ::= { mscVrIpxSrvcOperEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Adj -- This component provides adjacent node information available -- on a per ProtocolPort basis. This information is retrieved from, -- but formatted and displayed differently than, the information -- in the route table. It is useful for network configuration -- debugging. mscVrIpxAdj OBJECT IDENTIFIER ::= { mscVrIpx 6 } mscVrIpxAdjRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxAdjRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpxAdj components." ::= { mscVrIpxAdj 1 } mscVrIpxAdjRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxAdjRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxAdj component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxAdjProtocolPortIdentifierIndex, mscVrIpxAdjNetworkNumberIndex } ::= { mscVrIpxAdjRowStatusTable 1 } MscVrIpxAdjRowStatusEntry ::= SEQUENCE { mscVrIpxAdjRowStatus RowStatus, mscVrIpxAdjComponentName DisplayString, mscVrIpxAdjStorageType StorageType, mscVrIpxAdjProtocolPortIdentifierIndex AsciiStringIndex, mscVrIpxAdjNetworkNumberIndex DashedHexString } mscVrIpxAdjRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxAdj components. These components cannot be added nor deleted." ::= { mscVrIpxAdjRowStatusEntry 1 } mscVrIpxAdjComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxAdjRowStatusEntry 2 } mscVrIpxAdjStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxAdj tables." ::= { mscVrIpxAdjRowStatusEntry 4 } mscVrIpxAdjProtocolPortIdentifierIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxAdj tables." ::= { mscVrIpxAdjRowStatusEntry 10 } mscVrIpxAdjNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscVrIpxAdj tables." ::= { mscVrIpxAdjRowStatusEntry 11 } mscVrIpxAdjOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxAdjOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Adjacencies operational group." ::= { mscVrIpxAdj 10 } mscVrIpxAdjOperEntry OBJECT-TYPE SYNTAX MscVrIpxAdjOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxAdjOperTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxAdjProtocolPortIdentifierIndex, mscVrIpxAdjNetworkNumberIndex } ::= { mscVrIpxAdjOperTable 1 } MscVrIpxAdjOperEntry ::= SEQUENCE { mscVrIpxAdjPhysAddress PhysAddress, mscVrIpxAdjAdjacencyState INTEGER } mscVrIpxAdjPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of the adjacent router." ::= { mscVrIpxAdjOperEntry 1 } mscVrIpxAdjAdjacencyState OBJECT-TYPE SYNTAX INTEGER { initializing(1), up(2), failed(3), down(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the connection to the adjacent router." ::= { mscVrIpxAdjOperEntry 2 } -- Vr/ Ipx NetSentry -- NetSentry filters, defined in and compiled by NetSentry can be applied -- to IPX packets. IPX packets can be filtered on source and destination -- network and node combinations. mscVrIpxNs OBJECT IDENTIFIER ::= { mscVrIpx 7 } mscVrIpxNsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxNs components." ::= { mscVrIpxNs 1 } mscVrIpxNsRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxNs component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxNsIndex } ::= { mscVrIpxNsRowStatusTable 1 } MscVrIpxNsRowStatusEntry ::= SEQUENCE { mscVrIpxNsRowStatus RowStatus, mscVrIpxNsComponentName DisplayString, mscVrIpxNsStorageType StorageType, mscVrIpxNsIndex NonReplicated } mscVrIpxNsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxNs components. These components can be added and deleted." ::= { mscVrIpxNsRowStatusEntry 1 } mscVrIpxNsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxNsRowStatusEntry 2 } mscVrIpxNsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxNs tables." ::= { mscVrIpxNsRowStatusEntry 4 } mscVrIpxNsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxNs tables." ::= { mscVrIpxNsRowStatusEntry 10 } mscVrIpxNsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The provisionable attribute group for the IpxNetSentry component." ::= { mscVrIpxNs 10 } mscVrIpxNsProvEntry OBJECT-TYPE SYNTAX MscVrIpxNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxNsProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxNsIndex } ::= { mscVrIpxNsProvTable 1 } MscVrIpxNsProvEntry ::= SEQUENCE { mscVrIpxNsFirstFilter AsciiString, mscVrIpxNsLastFilter AsciiString, mscVrIpxNsLocalInFilter AsciiString, mscVrIpxNsLocalOutFilter AsciiString } mscVrIpxNsFirstFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet." ::= { mscVrIpxNsProvEntry 1 } mscVrIpxNsLastFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet." ::= { mscVrIpxNsProvEntry 2 } mscVrIpxNsLocalInFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The filter name of the NetSentry filter to be applied at the Local In filter point." ::= { mscVrIpxNsProvEntry 3 } mscVrIpxNsLocalOutFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The filter name of the NetSentry filter to be applied at the Local Out filter point." ::= { mscVrIpxNsProvEntry 4 } -- Vr/ Ipx NetSentry NetSentryApplyList -- This component contains a list of NetSentry filters that have been -- applied to IPX packets and information pertaining to each application of -- such NetSentry filters. mscVrIpxNsNetSentryApp OBJECT IDENTIFIER ::= { mscVrIpxNs 2 } mscVrIpxNsNetSentryAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxNsNetSentryAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscVrIpxNsNetSentryApp components." ::= { mscVrIpxNsNetSentryApp 1 } mscVrIpxNsNetSentryAppRowStatusEntry OBJECT-TYPE SYNTAX MscVrIpxNsNetSentryAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscVrIpxNsNetSentryApp component." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxNsIndex, mscVrIpxNsNetSentryAppEntryIndex } ::= { mscVrIpxNsNetSentryAppRowStatusTable 1 } MscVrIpxNsNetSentryAppRowStatusEntry ::= SEQUENCE { mscVrIpxNsNetSentryAppRowStatus RowStatus, mscVrIpxNsNetSentryAppComponentName DisplayString, mscVrIpxNsNetSentryAppStorageType StorageType, mscVrIpxNsNetSentryAppEntryIndex Integer32 } mscVrIpxNsNetSentryAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscVrIpxNsNetSentryApp components. These components can be added and deleted." ::= { mscVrIpxNsNetSentryAppRowStatusEntry 1 } mscVrIpxNsNetSentryAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscVrIpxNsNetSentryAppRowStatusEntry 2 } mscVrIpxNsNetSentryAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscVrIpxNsNetSentryApp tables." ::= { mscVrIpxNsNetSentryAppRowStatusEntry 4 } mscVrIpxNsNetSentryAppEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscVrIpxNsNetSentryApp tables." ::= { mscVrIpxNsNetSentryAppRowStatusEntry 10 } mscVrIpxNsNetSentryAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscVrIpxNsNetSentryAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisionable group for the IpxNetSentryApplyList." ::= { mscVrIpxNsNetSentryApp 10 } mscVrIpxNsNetSentryAppProvEntry OBJECT-TYPE SYNTAX MscVrIpxNsNetSentryAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscVrIpxNsNetSentryAppProvTable." INDEX { mscVrIndex, mscVrIpxIndex, mscVrIpxNsIndex, mscVrIpxNsNetSentryAppEntryIndex } ::= { mscVrIpxNsNetSentryAppProvTable 1 } MscVrIpxNsNetSentryAppProvEntry ::= SEQUENCE { mscVrIpxNsNetSentryAppFilter AsciiString, mscVrIpxNsNetSentryAppNetworkNumber1 AsciiString, mscVrIpxNsNetSentryAppNode1 AsciiString, mscVrIpxNsNetSentryAppDirection INTEGER, mscVrIpxNsNetSentryAppNetworkNumber2 AsciiString, mscVrIpxNsNetSentryAppNode2 AsciiString } mscVrIpxNsNetSentryAppFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList." ::= { mscVrIpxNsNetSentryAppProvEntry 1 } mscVrIpxNsNetSentryAppNetworkNumber1 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..11)) ACCESS read-write STATUS mandatory DESCRIPTION "The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks." ::= { mscVrIpxNsNetSentryAppProvEntry 2 } mscVrIpxNsNetSentryAppNode1 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes." ::= { mscVrIpxNsNetSentryAppProvEntry 3 } mscVrIpxNsNetSentryAppDirection OBJECT-TYPE SYNTAX INTEGER { to(1), from(2), tofrom(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction)." ::= { mscVrIpxNsNetSentryAppProvEntry 4 } mscVrIpxNsNetSentryAppNetworkNumber2 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..11)) ACCESS read-write STATUS mandatory DESCRIPTION "The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks." ::= { mscVrIpxNsNetSentryAppProvEntry 5 } mscVrIpxNsNetSentryAppNode2 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes." ::= { mscVrIpxNsNetSentryAppProvEntry 6 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscVrPpIpxPRipPInResponses, -- mscVrIpxNsFirstFilter, -- mscVrIpxSapMaxDampedSpecificRequests, -- mscVrIpxSapSFltrNumberOfApplyEntries, -- mscVrPpIpxPSapPComponentName, -- mscVrIpxSapSapAppRowStatus, -- mscVrIpxRipRowStatus, -- mscVrIpxRipRipAppStorageType, -- mscVrIpxNsLocalInFilter, -- mscVrIpxProtocolPortCount, -- mscVrIpxFwdProtocolPortId, -- mscVrIpxSapMaxDampedGeneralRequests, -- mscVrIpxComponentName, -- mscVrIpxForwarded, -- mscVrPpIpxPIWPInitFails, -- mscVrIpxRipRFltrNetworkNumber, -- mscVrPpIpxPType, -- mscVrIpxNsLastFilter, -- mscVrIpxSrvcSocket, -- mscVrPpIpxPSapPInPackets, -- mscVrIpxInNetBIOS, -- mscVrIpxControlDelay, -- mscVrIpxNsComponentName, -- mscVrIpxNsNetSentryAppNode1, -- mscVrIpxDamping, -- mscVrPpIpxPIWPNeighbourInternalNetworkNumber, -- mscVrIpxSapAgeMultiplier, -- mscVrPpIpxPRipPStorageType, -- mscVrPpIpxPNode, -- mscVrPpIpxPNetSentryPComponentName, -- mscVrIpxServicesCount, -- mscVrIpxOutRequests, -- mscVrIpxSrvcProtocol, -- mscVrPpIpxPNetSentryPOutGoingFilter, -- mscVrPpIpxPUsageState, -- mscVrIpxInReceives, -- mscVrIpxSapComponentName, -- mscVrIpxRipRipIncorrectPackets, -- mscVrIpxSapSFltrRowStatus, -- mscVrIpxNsNetSentryAppNetworkNumber2, -- mscVrIpxFwdNextHopNetworkNumber, -- mscVrPpIpxPRipPIncorrectPackets, -- mscVrPpIpxPComponentName, -- mscVrIpxNsNetSentryAppRowStatus, -- mscVrPpIpxPForwarded, -- mscVrIpxRipRFltrNumberOfApplyEntries, -- mscVrIpxSnmpOperStatus, -- mscVrIpxRipRFltrStorageType, -- mscVrIpxNsNetSentryAppComponentName, -- mscVrPpIpxPRipPRowStatus, -- mscVrIpxRipRFltrNode, -- mscVrIpxSapSapAppDirection, -- mscVrIpxNsNetSentryAppFilter, -- mscVrPpIpxPSapPOutResponses, -- mscVrIpxSapSFltrStorageType, -- mscVrIpxInitialGeneralRequests, -- mscVrIpxStorageType, -- mscVrIpxNsLocalOutFilter, -- mscVrIpxNsStorageType, -- mscVrIpxFwdComponentName, -- mscVrIpxNoRoutes, -- mscVrIpxRipRFltrComponentName, -- mscVrPpIpxPRipPOutPackets, -- mscVrIpxRipUpdateInterval, -- mscVrIpxInTooManyHops, -- mscVrPpIpxPInReceives, -- mscVrIpxNsRowStatus, -- mscVrIpxSapStorageType, -- mscVrIpxMaxHops, -- mscVrIpxSapSapAppStorageType, -- mscVrIpxAdminState, -- mscVrPpIpxPIWPComponentName, -- mscVrPpIpxPNetSentryPStorageType, -- mscVrIpxOutFiltered, -- mscVrIpxNsNetSentryAppDirection, -- mscVrIpxSrvcComponentName, -- mscVrIpxRowStatus, -- mscVrIpxAdjStorageType, -- mscVrIpxSapSFltrDisposition, -- mscVrIpxSnmpAdminStatus, -- mscVrIpxInBadChecksums, -- mscVrIpxUpdateDelay, -- mscVrIpxRipRipOut, -- mscVrPpIpxPSapPOutRequests, -- mscVrPpIpxPSapPInResponses, -- mscVrIpxSapSFltrNetworkNumber, -- mscVrPpIpxPStorageType, -- mscVrIpxRipMaxDampedGeneralRequests, -- mscVrIpxSapRowStatus, -- mscVrIpxNsNetSentryAppStorageType, -- mscVrPpIpxPBroadcastInhibit, -- mscVrIpxSapSFltrName, -- mscVrIpxFwdProtocol, -- mscVrIpxOutPackets, -- mscVrPpIpxPNetSentryPRowStatus, -- mscVrPpIpxPRipPInPackets, -- mscVrIpxSapSapIncorrectPackets, -- mscVrPpIpxPSnmpOperStatus, -- mscVrIpxFwdTicks, -- mscVrIpxInDelivers, -- mscVrPpIpxPAdminState, -- mscVrIpxRipAgeMultiplier, -- mscVrIpxInUnknownSocket, -- mscVrPpIpxPEncapsulation, -- mscVrIpxFwdStorageType, -- mscVrIpxInHeaderErrors, -- mscVrIpxRipRipAppComponentName, -- mscVrPpIpxPRowStatus, -- mscVrIpxSapSFltrType, -- mscVrPpIpxPSapPStorageType, -- mscVrIpxOutDiscards, -- mscVrPpIpxPNetworkNumberProv, -- mscVrIpxSapSapAppComponentName, -- mscVrIpxOperationalState, -- mscVrIpxAdjComponentName, -- mscVrIpxRipRipIn, -- mscVrIpxNsNetSentryAppNetworkNumber1, -- mscVrPpIpxPDefaultType, -- mscVrIpxFwdHopCount, -- mscVrIpxRipRFltrHops, -- mscVrIpxInFiltered, -- mscVrIpxDestinationCount, -- mscVrIpxFwdRowStatus, -- mscVrIpxSapSFltrNode, -- mscVrIpxRipRFltrTicks, -- mscVrIpxSapSapIn, -- mscVrIpxAdjAdjacencyState, -- mscVrPpIpxPSnmpAdminStatus, -- mscVrIpxNetworkNumber, -- mscVrPpIpxPSapPIncorrectPackets, -- mscVrPpIpxPRipPInRequests, -- mscVrIpxRipRFltrRowStatus, -- mscVrPpIpxPSapPInRequests, -- mscVrIpxSrvcStorageType, -- mscVrPpIpxPSapPRowStatus, -- mscVrPpIpxPRipPOutResponses, -- mscVrIpxRipRFltrDisposition, -- mscVrPpIpxPOperationalState, -- mscVrIpxSapSFltrComponentName, -- mscVrIpxRipComponentName, -- mscVrIpxMaxPathSplits, -- mscVrIpxNsNetSentryAppNode2, -- mscVrPpIpxPIWPRowStatus, -- mscVrIpxRipRipAppDirection, -- mscVrPpIpxPSourceRouteEndStationSupport, -- mscVrIpxHoldDownInterval, -- mscVrPpIpxPIWPStorageType, -- mscVrIpxSrvcRowStatus, -- mscVrPpIpxPRipPComponentName, -- mscVrIpxInDiscards, -- mscVrIpxSrvcHopCount, -- mscVrIpxRipRipAppRowStatus, -- mscVrIpxAdjRowStatus, -- mscVrIpxRipStorageType, -- mscVrPpIpxPSapPOutPackets, -- mscVrIpxSapUpdateInterval, -- mscVrIpxAdjPhysAddress, -- mscVrPpIpxPIWPNeighbourRouterName, -- mscVrPpIpxPStateChanges, -- mscVrIpxSapSapOut, -- mscVrIpxFwdNextHopPhysAddress, -- mscVrIpxUsageState, -- mscVrPpIpxPNetworkNumber, -- mscVrPpIpxPNetSentryPInComingFilter, -- mscVrIpxOutMalformedRequests, -- mscVrIpxRipMaxDampedSpecificRequests, -- mscVrIpxRipRFltrPort, -- mscVrPpIpxPRipPOutRequests } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." ipxGroup OBJECT IDENTIFIER ::= { ipxMIB 1 } ipxGroupCA OBJECT IDENTIFIER ::= { ipxGroup 1 } ipxGroupCA02 OBJECT IDENTIFIER ::= { ipxGroupCA 3 } ipxGroupCA02A OBJECT IDENTIFIER ::= { ipxGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 Ipx." -- STATUS mandatory -- DESCRIPTION "Carrier Passport Ipx MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-IpxMIB -- INCLUDES { ipxGroupCA02A } ipxCapabilities OBJECT IDENTIFIER ::= { ipxMIB 3 } ipxCapabilitiesCA OBJECT IDENTIFIER ::= { ipxCapabilities 1 } ipxCapabilitiesCA02 OBJECT IDENTIFIER ::= { ipxCapabilitiesCA 3 } ipxCapabilitiesCA02A OBJECT IDENTIFIER ::= { ipxCapabilitiesCA02 2 } END