MPOA-MIB DEFINITIONS ::= BEGIN IMPORTS -- MODULE-IDENTITY, OBJECT-TYPE, -- enterprises, Counter32, Counter64, Integer32 -- enterprises, Counter32, Integer32 -- FROM SNMPv2-SMI Counter, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 -- TEXTUAL-CONVENTION, -- MacAddress, TimeInterval, TimeStamp, TruthValue, RowStatus -- FROM SNMPv2-TC -- MODULE-COMPLIANCE, OBJECT-GROUP -- FROM SNMPv2-CONF lecIndex FROM LAN-EMULATION-CLIENT-MIB -- AtmAddr -- FROM ATM-TC-MIB ; atmForum OBJECT IDENTIFIER ::= { enterprises 353 } atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 } atmfMpoa OBJECT IDENTIFIER ::= { atmForumNetworkManagement 8 } -- mpoaMIB MODULE-IDENTITY -- LAST-UPDATED "9805220000Z" -- ORGANIZATION "ATM Forum LANE/MPOA Working Group" -- CONTACT-INFO -- "The ATM Forum -- 2570 West El Camino Real, Suite 304 -- Mountain View, CA 94040-1313 -- USA -- -- Tel: +1-650-949-6700 -- Fax: +1-650-949-6705 -- -- Web: http://www.atmforum.com -- E-mail: info@atmforum.com" -- DESCRIPTION -- "This module defines a portion of the management -- information base (MIB) for managing Multiprotocol Over -- ATM clients and servers." -- -- REVISION "9805220000Z" -- DESCRIPTION -- "Final Ballot Version, May 22, 1998 -- Version of the MIB module MPOA-MIB -- that is in: AF-MPOA-0092.000." -- REVISION "9802250000Z" -- DESCRIPTION -- "Straw Ballot Revision 1.0, February 25, 1998 -- -- -- Version of the MIB module MPOA-MIB -- that is in STR-MPOA-MIB-01.01." -- ::= { atmfMpoa 1 } mpoaMIB OBJECT IDENTIFIER ::= { atmfMpoa 1 } -- atmForum OBJECT IDENTIFIER ::= { enterprises 353 } -- atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 } -- atmfMpoa OBJECT IDENTIFIER ::= { atmForumNetworkManagement 8 } -- -- Textual Conventions -- -- All representations of ATM addresses in this MIB Module use -- the data type: AtmAddr ::= OCTET STRING (SIZE (0 .. 32)) TruthValue ::= INTEGER { true (1), false (2) } RowStatus ::= INTEGER MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" order -- LecIndex ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "The value of this object identifies the LEC -- for which the entry contains management -- information. The value of this object for -- a particular LAN Emulation Client (LEC) has -- the same value as the lecIndex object, defined -- in the LAN-EMULATION-CLIENT MIB, for the same LEC." -- SYNTAX INTEGER (1..2147483647) LecIndex ::= INTEGER (1..2147483647) -- AtmConfigAddr ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "The ATM address used by the network entity. -- The address types are: NSAP SEL Byte (1 octet) -- E.164 (8 octets), and NSAP (20 octets). -- Note: If the 1 octet NSAP SEL is given, the -- other 19 octets of the NSAP are derived -- from the system either through ILMI or another method. -- Note: The E.164 address is encoded in BCD format." -- SYNTAX OCTET STRING (SIZE(1|8|20)) AtmConfigAddr ::= OCTET STRING (SIZE(1|8|20)) -- InternetworkAddrType ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "Internetwork Layer Address Types. -- Values are defined in Assigned Numbers, -- RFC1700. Note: not all of these values make sense in all -- contexts where this type is used in this MIB, but they are -- included for completeness." -- REFERENCE -- "Assigned Numbers, RFC1700, ADDRESS FAMILY NUMBERS" -- SYNTAX INTEGER { InternetworkAddrType ::= INTEGER { -- -pgs, pr22705 other(0), ipV4(1), ipV6(2), nsap(3), hdlc(4), bbn1822(5), ieee802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164WithNsap(15) } -- InternetworkAddr ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "The value of an internetwork layer address." -- SYNTAX OCTET STRING (SIZE (0..60)) -- -pgs, pr22705 InternetworkAddr ::= OCTET STRING (SIZE (0..60)) InternetworkAddr ::= OCTET STRING (SIZE (0 .. 60)) -- MpcIndex ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "A unique value, for each MPOA client -- which this SNMP agent manages. It is recommended that -- values -- are assigned contiguously starting from 1. The value for -- each MPOA Client must remain constant, even if the MPOA -- Client or SNMP agent is re-initialized." -- SYNTAX INTEGER (1..2147483647) MpcIndex ::= INTEGER (1..2147483647) -- MpsIndex ::= TEXTUAL-CONVENTION -- STATUS mandatory -- DESCRIPTION -- "A unique value, for each MPOA Server -- which this SNMP agent manages. It is recommended that -- values -- -- -- are assigned contiguously starting from 1. The value for -- each MPOA Server must remain constant, even if the MPOA -- Server or SNMP agent is re-initialized." -- SYNTAX INTEGER (1..2147483647) MpsIndex ::= INTEGER (1..2147483647) mpoaMIBObjects OBJECT IDENTIFIER ::= { mpoaMIB 1 } -- This MIB module consists of the following groups: -- -- (1) MPOA Common Groups -- (a) Device Type group -- (b) Device Type Mps Mac group -- -- (2) MPOA Client Groups -- (a) Configuration group -- (b) Actual group -- (c) Data Atm Address group -- (d) Statistics group -- (e) Protocol support group -- (f) LEC -> MPC Mapping group -- (g) MPC's MPS Information group -- (h) MAC Address group -- (i) Ingress Cache Total Packet group -- (j) Ingress Cache Total Octet group -- (k) Ingress Cache group -- (l) Egress Cache Total Packet group -- (m) Egress Cache Total Octet group -- (n) Egress Cache group -- -- (3) MPOA Server groups -- (a) Configuration group -- (b) Actual group -- (c) Statistics group -- (d) Protocol support group -- (e) LEC -> MPS Mapping group -- (f) Ingress Cache group -- (g) Egress Cache group -- -- ------------------------------------------------------------- -- mpoaCommonObjects OBJECT IDENTIFIER ::= { mpoaMIBObjects 1 } deviceTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The device type table represents the mapping of the Lane Data ATM address to the MAC device capability. The unique key is the Lane data ATM address and Lec Index of the LEC associated with the MAC addresses. This table contains information which was gathered from its environment about neighboring machines. This Device type table represents the information of other/remote MPOA devices, discovered/gathered by each MPOA device. This MIB is not the device type of MPS/MPC itself; it is DISCOVERED information." REFERENCE "Sections: 5.2.3 Device Type TLV, and 4.2 Device Discovery, MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { mpoaCommonObjects 1 } deviceTypeEntry OBJECT-TYPE SYNTAX DeviceTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in this table and corresponding entries in the deviceTypeMpsMacAddressTable represent a mapping of a MAC device capability (i.e. the set of MAC addresses from a device) to the LEC ATM Address." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" INDEX { deviceTypeIndex } ::= { deviceTypeTable 1 } DeviceTypeEntry ::= SEQUENCE { deviceTypeIndex INTEGER, deviceTypeLecIndex LecIndex, deviceTypeRemoteLecAtmAddress AtmAddr, deviceTypeType INTEGER, deviceTypeMpsAtmAddress AtmAddr, deviceTypeMpcAtmAddress AtmAddr } deviceTypeIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Index into this table and also used as one of the indices for the deviceTypeMpsMacAddressTable. This index has local significance within the mpoaDeviceGroup. Entries in the `deviceTypeMpsMacAddressTable' which correspond to this index, and have the `deviceTypeType' value of `mps' or `mpsAndMps' are considered to be MPS MAC addresses." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 1 } deviceTypeLecIndex OBJECT-TYPE SYNTAX LecIndex ACCESS read-only STATUS mandatory DESCRIPTION "LecIndex of LEC that supports this data ATM address" REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 2 } deviceTypeRemoteLecAtmAddress OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "The ATM address learned by LE ARP." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 3 } deviceTypeType OBJECT-TYPE SYNTAX INTEGER { nonMpoa(1), mps(2), mpc(3), mpsAndMpc(4) } ACCESS read-only STATUS mandatory DESCRIPTION "same as the TLV" REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 4 } deviceTypeMpsAtmAddress OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "Associated MPS address, zeros for non-MPOA and mpc" REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 5 } deviceTypeMpcAtmAddress OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "Associated MPC address, zeros for non-MPOA & mps" REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeEntry 6 } -- The deviceTypeMpsMacAddress Table contains MAC addresses -- from the device type TLV. If the deviceTypeType was `mpsAndMpc' -- there must be at least one MPS MAC Address (i.e. at least one entry in -- this table.) If the deviceTypeType is `mps', there may be zero or more -- MPS MAC addresses in this table. If the deviceTypeType is `nonMpoa' -- or `mpc' then there will be no corresponding entries in this table. -- See Section 5.2.3 of the MPOA Letter Ballot 1.0 deviceTypeMpsMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceTypeMpsMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains MPS MAC Address information gathered from the MPOA DeviceTypeTLV." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { mpoaCommonObjects 2 } deviceTypeMpsMacAddressEntry OBJECT-TYPE SYNTAX DeviceTypeMpsMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents an MPS MAC Address. Each entry corresponds to a deviceTypeIndex value for which the deviceTypeType attribute is `mps' or `mpsAndMpc'." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" INDEX { deviceTypeIndex, deviceTypeMpsMacAddress } ::= { deviceTypeMpsMacAddressTable 1 } DeviceTypeMpsMacAddressEntry ::= SEQUENCE { deviceTypeMpsMacAddress MacAddress } deviceTypeMpsMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "MPS MAC address contained in the Device Type TLV which is identified by the deviceTypeIndex in the deviceTypeTable." REFERENCE "Section 5.2.3 Device Type TLV MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000" ::= { deviceTypeMpsMacAddressEntry 1 } -- -- MPOA Client Objects -- mpcObjects OBJECT IDENTIFIER ::= { mpoaMIBObjects 2 } -- -- MPOA Client configuration group -- mpcNextIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains an appropriate value to be used for mpcIndex when creating entries in the mpcConfigTable. The value 0 indicates that no new rows can be created. Otherwise, it is recommended that values are assigned contiguously, starting from 1. MPC creation by a Manager: To obtain the mpcIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. If the value retrieved is 0 (zero), the manager cannot create a row. After each retrieval of a non-zero value, the manager should issue a management protocol SET operation using the value just retrieved. If the SET is successful, the agent should update the value to the next unassigned index, or zero if appropriate. NOTE: the manager may also issue a set on this object with a value of its own choosing. If the set is successful, the manager may use this value for the mpcIndex. In this case, the agent would update the value to the next unassigned index, or zero if appropriate. The definition of `next unassigned index' is any mpcNextIndex value that has not yet been set by a manager, or reserved by the agent (see next paragraph), since this agent was last re-initialized. MPC creation by an Agent: When a row in the mpcConfigTable is created by an agent, the agent should reserve the value of the index by updating the value of this object to the next unassigned index or zero if appropriate. Thus, a manager will not be able to set an index reserved by an agent. In the situation of an agent re-initialization, all currently used mpcIndexes must be preserved. In other words, the Agent should store in non-volatile memory all of the currently used mpcIndexes (along with all necessary configuration information from the mpcConfigTable). When the agent is re-initialized, the mpcNextIndex value is any valid Integer32 value which is not being used as an mpcIndex, except 0 which maintains its original definition of indicating that a row cannot be created." ::= { mpcObjects 1 } mpcConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The MPOA Client Configuration Table. This table contains configuration information for all MPOA Clients which this agent manages." ::= { mpcObjects 2 } mpcConfigEntry OBJECT-TYPE SYNTAX MpcConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "MPOA Client Configuration Entry. Each entry contains configuration information for one MPOA Client. The configuration information, including the mpcIndex, must be restored after a re-initialization of an MPC or a re-initialization of the SNMP agent." INDEX { mpcIndex } ::= { mpcConfigTable 1 } MpcConfigEntry ::= SEQUENCE { -- -- Primary config info: Index, mode and control address information -- mpcIndex MpcIndex, mpcRowStatus RowStatus, mpcConfigMode INTEGER, mpcCtrlAtmAddr AtmConfigAddr, -- -- MPC parameters which may be obtained from -- the LECS. -- mpcSCSetupFrameCount INTEGER, -- MPC-p1 mpcSCSetupFrameTime INTEGER, -- MPC-p2 -- The Flow-detection Protocols (denoted with MPC-p3) -- are represented in the mpcProtocolsTable. mpcInitialRetryTime INTEGER, -- MPC-p4 mpcRetryTimeMaximum INTEGER, -- MPC-p5 mpcHoldDownTime INTEGER -- MPC-p6 } mpcIndex OBJECT-TYPE SYNTAX MpcIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "A value which uniquely identifies this conceptual row in the mpcConfigTable. The `mpcNextIndex' object needs to be used to determine the value of this object. A row cannot be added, unless the mpcCtrlAtmAddress is unique. In the event of either an MPC re-initialization or an agent re-initialization, the value of this mpcIndex must remain the same. In other words, the row needs to be saved and restored in the event of an MPC or SNMP Agent re-initialization." ::= { mpcConfigEntry 1 } mpcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object allows creation and deletion of MPOA Clients. Within each conceptual mpcConfigTable row, writable objects may be modified, regardless of the value of mpcRowStatus. It is not necessary to set a row's status to `notInService' first. A row cannot be created, unless the mpcAtmCtrlAddress in this table is unique. When an MPOA Client is created via this object, it will initially have `mpcActualState' = `initialState'" ::= { mpcConfigEntry 2 } mpcConfigMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this MPC should auto-configure the next time it is (re-)initialized. During the (re-)initialization of this MPC, if the mode is automatic(1), the LECS is contacted and requests are made for all MPC-p* parameters. Otherwise, if the mode is manual(2), the values of the configuration parameters are obtained from the mpcConfigTableand the mpcProtocolTable. In other words, when the MPC is first initialized, it can use the default or configured values from the mpcConfigTable and mpcProtocolTable. If the mode is manual (2), no further action is required. If the mode is automatic (1), then the LECS should be contacted and all available MPC-p1 to MPC-p6 parameters would be retrieved. These parameters would then overwrite the existing MPC-p1 to MPC-p6 parameters. The actual values are reflected in the mpcActualTable." DEFVAL { automatic } ::= { mpcConfigEntry 3 } mpcCtrlAtmAddr OBJECT-TYPE SYNTAX AtmConfigAddr ACCESS read-write STATUS mandatory DESCRIPTION "The MPC's Control ATM Address. There exists one Control ATM Address per MPC, therefore, the value of this entry is unique within the table. The control ATM Address is the address which is used by the MPC in its requests to the MPS. The value of this object should not change, once created." ::= { mpcConfigEntry 4 } mpcSCSetupFrameCount OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This represents the MPC-p1 Short-cut setup frame count parameter. The MPC-p1 value is frames measured over mpcSCFrameTime seconds. Flow detection is protocol independent. i.e. all network layers mpcProtocolEntries for this MPC share the flow rate specification. A value of 1 causes all flows to initiate resolution/shortcut process." DEFVAL { 10 } ::= { mpcConfigEntry 5 } mpcSCSetupFrameTime OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION "MPC-p2 Short-cut setup frame time, in seconds." DEFVAL { 1 } ::= { mpcConfigEntry 6 } mpcInitialRetryTime OBJECT-TYPE SYNTAX INTEGER (1..300) ACCESS read-write STATUS mandatory DESCRIPTION "MPC-p4 is the initial value for the retry time out period used for timing out MPOA Resolution Requests in seconds. Retry time consists of this initial time-out (MPC-p4) and a retry multiplier (MPC-c1). If a response is not received, then another request is sent with a timeout of `retry time' * MPC-c1 seconds, or until mpcRetryTimeMaximum." DEFVAL { 5 } ::= { mpcConfigEntry 7 } mpcRetryTimeMaximum OBJECT-TYPE SYNTAX INTEGER (10..300) ACCESS read-write STATUS mandatory DESCRIPTION "MPC-p5 cumulative max value for Retry Time (MPC-p4). Retries are attempted at intervals determined by the algorithm described in the definition of mpcIntialRetryTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Section 4.3 MPOA Retry Mechanism" DEFVAL { 40 } ::= { mpcConfigEntry 8 } mpcHoldDownTime OBJECT-TYPE SYNTAX INTEGER (30..1200) ACCESS read-write STATUS mandatory DESCRIPTION "MPC-p6 Hold Down Time Minimum time to wait before reinitiating a failed resolution attempt. Default is mpcRetryTimeMaximum * 4." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Section 4.1.2.1 MPC Parameters" DEFVAL { 160 } ::= { mpcConfigEntry 9 } -- -- MPOA Client Actual group -- mpcActualTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcActualEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual values may differ from the configured values. For example, the mpcConfigMode takes affect only during (re-)initialization of the MPC. The MPC-p1 to MPC-p6 parameters may differ from the configured values because, if the MPC was (re-)initialized and the mpcConfigMode was set to automatic (1) then some, perhaps all, of the MPC-p1 to MPC-p6 parameters were retrieved from the LECS and the values from the LECS may differ from the configured/default values of the mpcConfigTable. NOTE: after re-initialization a set to an object in the mpcConfigTable which changes the value of the object will be reflect in this Table, except for a set to the mpcConfigMode which takes effect only during re-initialization." ::= { mpcObjects 3 } mpcActualEntry OBJECT-TYPE SYNTAX MpcActualEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the MPC Actual Table. An entry represents a specific MPOA Client's state information and the actual values which are being used by the MPOA Client. For example, the corresponding mpcConfigEntry contains default and/or configured parameters, if mpcConfigMode was set to manual, then these are the objects values' which are reflected for the mpcActualEntry. However, if the mpcConfigMode is automatic, then the mpcActualEntry will be all the corresponding mpcConfigEntry's object, excluding any objects which were retrieved from the LECS. In other words, the objects retrieved from the LECS during the (re-)initialization of the MPC overwrite any of the default and/or configured values. NOTE: any subsequent `set' to the configured values, e.g. an SNMP set operation, which is successful could result in a change to an mpcConfigTable value, and will be reflected in this table as well." -- AUGMENTS { mpcConfigEntry } INDEX { mpcIndex } -- for snmp v1, modified by pgs ::= { mpcActualTable 1 } MpcActualEntry ::= SEQUENCE { mpcActualState INTEGER, -- mpcDiscontinuityTime TimeStamp, mpcDiscontinuityTime INTEGER, -- snmp v1 -- -- Actual values for the MPCs. -- mpcActualConfigMode INTEGER, mpcActualSCSetupFrameCount INTEGER, -- MPC-p1 mpcActualSCSetupFrameTime INTEGER, -- MPC-p2 -- The flow-detection protocols for MPC-p3 are represented -- in the mpcProtocolTable. There is no actual counterpart -- for them. mpcActualInitialRetryTime INTEGER, -- MPC-p4 mpcActualRetryTimeMaximum INTEGER, -- MPC-p5 mpcActualHoldDownTime INTEGER -- MPC-p6 } mpcActualState OBJECT-TYPE SYNTAX INTEGER { unknown(1), initialState(2), up(3), down(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the actual state of the MPOA Client." ::= { mpcActualEntry 1 } mpcDiscontinuityTime OBJECT-TYPE -- SYNTAX TimeStamp SYNTAX INTEGER -- snmp v1 ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this MPC's counters experienced a discontinuity. The relevant counters are the specific instances associated with this MPC. If discontinuities have not occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { mpcActualEntry 2 } mpcActualConfigMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this MPC auto-configured when it was last (re-)initialized." ::= { mpcActualEntry 3 } mpcActualSCSetupFrameCount OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "MPC-p1 Short-cut setup frame count. In frames measured over mpcShortcutFrameTime seconds. Flow detection is protocol independent. i.e. all network layers mpcProtocolEntry share the flow rate specification. A value of 1 implies that resolutions for short-cuts are attempted for all flows." ::= { mpcActualEntry 4 } mpcActualSCSetupFrameTime OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-only STATUS mandatory DESCRIPTION "Actual MPC-p2 Short-cut setup frame time, in seconds." ::= { mpcActualEntry 5 } mpcActualInitialRetryTime OBJECT-TYPE SYNTAX INTEGER (1..300) ACCESS read-only STATUS mandatory DESCRIPTION "Actual MPC-p4 is initial value for the retry time out." ::= { mpcActualEntry 6 } mpcActualRetryTimeMaximum OBJECT-TYPE SYNTAX INTEGER (30..300) ACCESS read-only STATUS mandatory DESCRIPTION "MPC-p5 cumulative maximum value for Retry Time (MPC-p4). Retries are attempted at intervals determined by the algorithm described in the definition of mpcActualInitialRetryTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Section 4.3 MPOA Retry Mechanism" ::= { mpcActualEntry 7 } mpcActualHoldDownTime OBJECT-TYPE SYNTAX INTEGER (30..1200) ACCESS read-only STATUS mandatory DESCRIPTION "MPC-p6 Hold Down Time Minimum time to wait before reinitiating a failed resolution attempt. The default value is mpcRetryTimeMaximum * 4." ::= { mpcActualEntry 8 } -- -- DataAtmAddresses -> MPC -- mpcDataAtmAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcDataAtmAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table which shows all the data ATM addresses associated with all MPOA Clients." ::= { mpcObjects 4 } mpcDataAtmAddressEntry OBJECT-TYPE SYNTAX MpcDataAtmAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row defines one data ATM address associated with an MPC. NOTE: if an MPC has more than one data ATM address then there will be another entry which contains the same mpcIndex subIdentifier, with a different mpcDataAtmAddress." INDEX { mpcIndex, mpcDataAtmAddress } ::= { mpcDataAtmAddressTable 1 } MpcDataAtmAddressEntry ::= SEQUENCE { mpcDataAtmAddress AtmAddr, mpcDataAtmAddressRowStatus RowStatus } mpcDataAtmAddress OBJECT-TYPE SYNTAX AtmAddr ACCESS not-accessible STATUS mandatory DESCRIPTION "A data ATM Address which is associated with an MPOA Client specified by the mpcIndex." ::= { mpcDataAtmAddressEntry 1 } mpcDataAtmAddressRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object allows creation and deletion of an MPOA Client's Data ATM Addresses. The row can be created/deleted by either an NMS or by the SNMP agent." ::= { mpcDataAtmAddressEntry 2 } -- -- MPOA Client statistics group -- mpcStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A read-only table which contains statistical information for all MPOA Clients that this agent manages." ::= { mpcObjects 5 } mpcStatisticsEntry OBJECT-TYPE SYNTAX MpcStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row in this table contains statistics for one MPOA Client." -- AUGMENTS { mpcConfigEntry } INDEX { mpcIndex } -- for snmp v1, modified by pgs ::= { mpcStatisticsTable 1 } MpcStatisticsEntry ::= SEQUENCE { mpcStatTxMpoaResolveRequests Counter, mpcStatRxMpoaResolveReplyAcks Counter, mpcStatRxMpoaResolveReplyInsufECResources Counter, mpcStatRxMpoaResolveReplyInsufSCResources Counter, mpcStatRxMpoaResolveReplyInsufEitherResources Counter, mpcStatRxMpoaResolveReplyUnsupportedInetProt Counter, mpcStatRxMpoaResolveReplyUnsupportedMacEncaps Counter, mpcStatRxMpoaResolveReplyUnspecifiedOther Counter, mpcStatRxMpoaImpRequests Counter, mpcStatTxMpoaImpReplyAcks Counter, mpcStatTxMpoaImpReplyInsufECResources Counter, mpcStatTxMpoaImpReplyInsufSCResources Counter, mpcStatTxMpoaImpReplyInsufEitherResources Counter, mpcStatTxMpoaImpReplyUnsupportedInetProt Counter, mpcStatTxMpoaImpReplyUnsupportedMacEncaps Counter, mpcStatTxMpoaImpReplyUnspecifiedOther Counter, mpcStatTxMpoaEgressCachePurgeRequests Counter, mpcStatRxMpoaEgressCachePurgeReplies Counter, mpcStatRxMpoaKeepAlives Counter, mpcStatRxMpoaTriggers Counter, mpcStatRxMpoaDataPlanePurges Counter, mpcStatTxMpoaDataPlanePurges Counter, mpcStatRxNhrpPurgeRequests Counter, mpcStatTxNhrpPurgeReplies Counter, -- NOTE: since the MPC supersedes the NHC's role, -- the following counters should be counted here, -- as opposed to the NHC. mpcStatRxErrUnrecognizedExtensions Counter, mpcStatRxErrLoopDetecteds Counter, mpcStatRxErrProtoAddrUnreachables Counter, mpcStatRxErrProtoErrors Counter, mpcStatRxErrSduSizeExceededs Counter, mpcStatRxErrInvalidExtensions Counter, mpcStatRxErrInvalidReplies Counter, mpcStatRxErrAuthenticationFailures Counter, mpcStatRxErrHopCountExceededs Counter } mpcStatTxMpoaResolveRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolve Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 1 } mpcStatRxMpoaResolveReplyAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of positively acknowledged MPC Resolved Replies received by this MPC with an MPOA CIE Code of 0x00 (Success). Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re- initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 2 } mpcStatRxMpoaResolveReplyInsufECResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 3 } mpcStatRxMpoaResolveReplyInsufSCResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x82, `Insufficient resources to accept the shortcut'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 4 } mpcStatRxMpoaResolveReplyInsufEitherResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 5 } mpcStatRxMpoaResolveReplyUnsupportedInetProt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x84, `Unsupported Internework Layer protocol'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 6 } mpcStatRxMpoaResolveReplyUnsupportedMacEncaps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 7 } mpcStatRxMpoaResolveReplyUnspecifiedOther OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 8 } mpcStatRxMpoaImpRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Cache Imposition Requests received by this MPC. Discontinuities in the value of this counter can occur at re- initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 9 } mpcStatTxMpoaImpReplyAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of successful MPOA Cache Imposition replies transmitted by this MPC with an MPOA CIE Code of 0x00 `Success'. Discontinuities in the value of this counter can occur at re- initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 10 } mpcStatTxMpoaImpReplyInsufECResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Cache Imposition Replies transmitted with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 11 } mpcStatTxMpoaImpReplyInsufSCResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 12 } mpcStatTxMpoaImpReplyInsufEitherResources OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 13 } mpcStatTxMpoaImpReplyUnsupportedInetProt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 14 } mpcStatTxMpoaImpReplyUnsupportedMacEncaps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x85, `Unsupported MAC Layer encapsulation'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 15 } mpcStatTxMpoaImpReplyUnspecifiedOther OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62." ::= { mpcStatisticsEntry 16 } mpcStatTxMpoaEgressCachePurgeRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Egress Cache Purge Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 17 } mpcStatRxMpoaEgressCachePurgeReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Egress Cache Purge Replies received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 18 } mpcStatRxMpoaKeepAlives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Keep Alive messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 19 } mpcStatRxMpoaTriggers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Trigger messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 20 } mpcStatRxMpoaDataPlanePurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Data Plane Purge messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 21 } mpcStatTxMpoaDataPlanePurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MPOA Data Plane Purge messages transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 22 } mpcStatRxNhrpPurgeRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Purge Requests received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 23 } mpcStatTxNhrpPurgeReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Purge Replies transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 24 } mpcStatRxErrUnrecognizedExtensions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Unrecognized Extension'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 25 } mpcStatRxErrLoopDetecteds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Loop Detected'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 26 } mpcStatRxErrProtoAddrUnreachables OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Protocol Address Unreachable'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 27 } mpcStatRxErrProtoErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Protocol Errors'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 28 } mpcStatRxErrSduSizeExceededs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `SDU Size Exceeded'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 29 } mpcStatRxErrInvalidExtensions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Invalid Extensions'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 30 } mpcStatRxErrInvalidReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Invalid Reply'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 31 } mpcStatRxErrAuthenticationFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Authentication Failure'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 32 } mpcStatRxErrHopCountExceededs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Error Indication packets received by this MPC with the error code `Hop Count Exceeded'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPC, and at other times, as indicated by the value of mpcDiscontinuityTime." ::= { mpcStatisticsEntry 33 } -- -- MPOA Client Protocol support group -- mpcProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List of protocols, per MPC, for which flow detection is enabled" REFERENCE "Multiprotocol Over ATM Version 1.0 (Letter Ballot), Section 4.1.2.1 MPC Parameters" ::= { mpcObjects 6 } mpcProtocolEntry OBJECT-TYPE SYNTAX MpcProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row indicates one protocol for which an MPC will do flow detection. If the LECS was contacted for configuration information, and the Control Octet of the MPC-p3 has the value of 0x01, `Enable', then protocol values retrieved from the LECS are reflected in this table and the mpcLECSValue object will be (1) true. Also, the user or agent can create rows which appropriately correspond to the MPC denoted by mpcIndex, and the mpcLECSValue object will be set to (2) false. NOTE: if the LECS does not return information for the MPC-p3 parameter, or if in manual mode, the user or agent should create at least one entry for the corresponding MPC. Both, LECS and user and/or agent created rows may exist in this Table." INDEX { mpcIndex, mpcFlowDetectProtocol } ::= {mpcProtocolTable 1 } MpcProtocolEntry ::= SEQUENCE { mpcFlowDetectProtocol InternetworkAddrType, mpcLECSValue TruthValue, mpcProtocolRowStatus RowStatus } mpcFlowDetectProtocol OBJECT-TYPE SYNTAX InternetworkAddrType ACCESS not-accessible STATUS mandatory DESCRIPTION "The protocol on which flow detection is performed. If this value was obtained from the LECS then this value is one of the collection of values returned in the MPC-p3 parameter." ::= { mpcProtocolEntry 1 } mpcLECSValue OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects if the current entry is due to a retrieval from the LECS or not. If this entry is due to the LECS, then true(1) is the value for this object, otherwise, false (2)." ::= { mpcProtocolEntry 2 } mpcProtocolRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by an agent or manager to create, delete or modify a row in this table." ::= { mpcProtocolEntry 3 } -- -- LEC -> MPC Mapping group -- mpcMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table mapping the `lecIndex' values of LANE Clients to the `mpcIndex' values of corresponding MPOA Clients." ::= { mpcObjects 7 } mpcMappingEntry OBJECT-TYPE SYNTAX MpcMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row defines one lecIndex --> mpcIndex mapping. The mpcIndex that a lecIndex maps to is not necessarily unique (an MPC can serve many LECs, however, a LEC cannot be served by more than one MPC)." REFERENCE "Multiprotocol Over ATM Version 1.0 (Letter Ballot), Section 4.4." INDEX { lecIndex } -- INDEX { LecIndex } ::= { mpcMappingTable 1 } MpcMappingEntry ::= SEQUENCE { mpcMappingRowStatus RowStatus, mpcMappingIndex MpcIndex } mpcMappingRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object is used by an agent or manager to create, delete or modify a row in this table." ::= { mpcMappingEntry 1 } mpcMappingIndex OBJECT-TYPE SYNTAX MpcIndex ACCESS read-write STATUS mandatory DESCRIPTION "The mpcIndex of the MPOA Client that is performing flow detection for the LANE Client represented by the lecIndex." ::= { mpcMappingEntry 2 } -- -- MPOA Client MPS information group -- mpcMpsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcMpsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a read-only table which contains information about the MPSs that these MPCs know about." ::= { mpcObjects 8 } mpcMpsEntry OBJECT-TYPE SYNTAX MpcMpsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row created by an MPC. The MPC learns about an MPS and creates a row." INDEX { mpcMpsIndex } ::= { mpcMpsTable 1 } MpcMpsEntry ::= SEQUENCE { mpcMpsIndex MpsIndex, mpcMpsAtmAddr AtmAddr } mpcMpsIndex OBJECT-TYPE SYNTAX MpsIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The MPS's index which is used to identify a row in this table." ::= { mpcMpsEntry 1 } mpcMpsAtmAddr OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "The Control ATM Address of the MPS" ::= { mpcMpsEntry 2 } -- -- MPOA Client's MAC Address group -- mpcMpsMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcMpsMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is a read-only table which contains information about all the MPSs' MAC Addresses that these MPCs know about." ::= { mpcObjects 9 } mpcMpsMacAddressEntry OBJECT-TYPE SYNTAX MpcMpsMacAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row is created by an MPC. The MPC learns about an MPS's MAC Address and creates a row." INDEX { mpcMpsIndex, mpcLecIndex } ::= { mpcMpsMacAddressTable 1 } MpcMpsMacAddressEntry ::= SEQUENCE { mpcLecIndex LecIndex, mpcMpsMacAddress MacAddress } mpcLecIndex OBJECT-TYPE SYNTAX LecIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The lecIndex which represents the associated LEC." ::= { mpcMpsMacAddressEntry 1 } mpcMpsMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address of the MPS." REFERENCE "Multiprotocol Over ATM Version 1.0 (Letter Ballot), Section 3.3.3.1" ::= { mpcMpsMacAddressEntry 2 } -- -- MPOA Client Ingress Cache group -- mpcIngressCacheTxTotalPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets transmitted over MPC Short Cuts." ::= { mpcObjects 10 } mpcIngressCacheTxTotalOctets OBJECT-TYPE -- SYNTAX Counter64 (snmp v1 not support) SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted over MPC Short Cuts." ::= { mpcObjects 11 } mpcIngressCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcIngressCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information for MPC Caches for the ingress MPC." ::= { mpcObjects 12 } mpcIngressCacheEntry OBJECT-TYPE SYNTAX MpcIngressCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry contains control information for a row in a MPC's Ingress Cache." INDEX { mpcIngressCacheDestInetworkAddrType, mpcIngressCacheDestAddr, mpcIndex, mpcMpsIndex } ::= { mpcIngressCacheTable 1 } MpcIngressCacheEntry ::= SEQUENCE { mpcIngressCacheDestInetworkAddrType InternetworkAddrType, mpcIngressCacheDestAddr InternetworkAddr, mpcIngressCachePrefixLen INTEGER, mpcIngressCacheDestAtmAddr AtmAddr, mpcIngressCacheSrcAtmAddr AtmAddr, mpcIngressCacheEntryState INTEGER, mpcIngressCacheEgressCacheTagValid TruthValue, mpcIngressCacheEgressCacheTag INTEGER, -- -- Information for diagnosing problems -- mpcIngressCacheLastNhrpCieCode INTEGER, mpcIngressCacheSigErrCode INTEGER, mpcIngressCacheRetries Counter, -- mpcIngressCacheTimeUntilNextResolutionRequest TimeInterval, -- mpcIngressCacheHoldingTime TimeInterval, mpcIngressCacheTimeUntilNextResolutionRequest INTEGER, -- snmp v1 mpcIngressCacheHoldingTime INTEGER, -- snmp v1 mpcIngressCacheServiceCategory INTEGER } mpcIngressCacheDestInetworkAddrType OBJECT-TYPE SYNTAX InternetworkAddrType ACCESS read-only STATUS mandatory DESCRIPTION "The type of the destination internetwork layer address." ::= { mpcIngressCacheEntry 1 } mpcIngressCacheDestAddr OBJECT-TYPE SYNTAX InternetworkAddr ACCESS read-only STATUS mandatory DESCRIPTION "The destination internetwork layer address for which this entry is defined." ::= { mpcIngressCacheEntry 2 } mpcIngressCachePrefixLen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Defines an equivalence class of addresses that match Prefix Length bit positions of the destination internetwork layer address." ::= { mpcIngressCacheEntry 3 } mpcIngressCacheDestAtmAddr OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "The Destination ATM Address received in the MPOA Resolution Reply." ::= { mpcIngressCacheEntry 4 } mpcIngressCacheSrcAtmAddr OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "The Source ATM Address for the MPOA Resolution Request." ::= { mpcIngressCacheEntry 5 } mpcIngressCacheEntryState OBJECT-TYPE SYNTAX INTEGER { doesNotExist (1), inactive (2), active(3), negative(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The present state of this MPC ingress cache. The states are: doesNotExist (1) -- the state is not yet available inactive (2) -- state exists, entry is not yet active. For an example, if using the Finite State Machine Appendix I.2, then the states Cached and query are considered `inactive'. active (3) -- state exists, entry is active. For an example, if using the Finite State Machine in Appendix I.2, then the states resolved and refresh are considered `active'. negative (4) -- state exists, entry is negative, which could mean a NAK response was received, or entry is doing a retry, etc. For example, if using the Finite State Machine in Appendix I.2, then the state `hold down' is considered `negative'." REFERENCE "Multiprotocol Over ATM, Letter Ballot, Appendix I.2." ::= { mpcIngressCacheEntry 6 } mpcIngressCacheEgressCacheTagValid OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "If the value of this object is true(1), then a valid Egress Cache Tag is present and the value of the Egress Cache Tag is in mpcIngressCacheEgressCacheTag. Otherwise, if this value is false(2), then there was no Egress Cache Tag, and the value of mpcIngressCacheEgressCacheTag is undefined." ::= { mpcIngressCacheEntry 7 } mpcIngressCacheEgressCacheTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If a valid Egress Cache Tag is present, then this object contains the value of that tag. To determine if this object contains a valid value, mpcIngressCacheEgressTagValid should be used." REFERENCE "Multiprotocol Over ATM Version 1.0 (Letter Ballot), Section 4.4.4.1." ::= { mpcIngressCacheEntry 8 } mpcIngressCacheLastNhrpCieCode OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The last NHRP CIE code received for this entry. This value is valid only during the Hold Down period of the cache entry. This value is undefined otherwise." REFERENCE "Normative section 4.4.6.1.1 of Multiprotocol Over ATM Version 1.0 (Letter Ballot)" ::= { mpcIngressCacheEntry 9} mpcIngressCacheSigErrCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Error code or Success of the last sinalling request for this cache entry." ::= { mpcIngressCacheEntry 10 } mpcIngressCacheRetries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The current number of times this MPC has issued a resolution request since it received a valid reply." ::= { mpcIngressCacheEntry 11 } mpcIngressCacheTimeUntilNextResolutionRequest OBJECT-TYPE -- SYNTAX TimeInterval SYNTAX INTEGER -- snmp v1 ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time the MPC must wait before issuing the next resolution request." ::= { mpcIngressCacheEntry 12 } mpcIngressCacheHoldingTime OBJECT-TYPE -- SYNTAX TimeInterval SYNTAX INTEGER -- snmp v1 ACCESS read-only STATUS mandatory DESCRIPTION "The time that this MPC's Ingress Cache Entry will remain valid. If the mpcIngressCacheEntryState is not active this value will be zero." ::= { mpcIngressCacheEntry 13 } mpcIngressCacheServiceCategory OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The service categories supported for this shortcut." REFERENCE "Lane V2 LUNI TLVs. AF-LANE-0084 page 122" ::= { mpcIngressCacheEntry 14 } -- -- MPOA Client Egress Cache group -- mpcEgressCacheRxTotalPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the total number of packets received by MPC Short Cuts." ::= { mpcObjects 13 } mpcEgressCacheRxTotalOctets OBJECT-TYPE -- SYNTAX Counter64 (snmp v1 not support) SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counts the total number of octets received by MPC Short Cuts." ::= { mpcObjects 14 } mpcEgressCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcEgressCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Egress Cache information for all the MPCs which this agent manages." ::= { mpcObjects 15 } mpcEgressCacheEntry OBJECT-TYPE SYNTAX MpcEgressCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the MPOA Client's Egress Cache table." INDEX { mpcEgressCacheId, mpcIndex, mpcMpsIndex } ::= { mpcEgressCacheTable 1 } MpcEgressCacheEntry ::= SEQUENCE { mpcEgressCacheId INTEGER, mpcEgressCacheInetworkAddrType InternetworkAddrType, mpcEgressCacheIDestAddr InternetworkAddr, mpcEgressCachePrefixLen INTEGER, mpcEgressCacheEntryState INTEGER, mpcEgressCacheEgressCacheTagValid TruthValue, mpcEgressCacheEgressCacheTag INTEGER, -- mpcEgressCacheHoldTime TimeInterval, mpcEgressCacheHoldTime INTEGER, -- snmp v1 mpcEgressCacheDataLinkHeader OCTET STRING, mpcEgressCacheIngressMpcDataAtmAddr AtmAddr, mpcEgressCacheLecIndex LecIndex, mpcEgressCacheServiceCategory INTEGER } mpcEgressCacheId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Cache ID Provided by the MPS in the Cache Imposition Request." ::= { mpcEgressCacheEntry 1 } mpcEgressCacheInetworkAddrType OBJECT-TYPE SYNTAX InternetworkAddrType ACCESS read-only STATUS mandatory DESCRIPTION "Type of Internetwork Address in this cache entry." ::= { mpcEgressCacheEntry 2 } mpcEgressCacheIDestAddr OBJECT-TYPE SYNTAX InternetworkAddr ACCESS read-only STATUS mandatory DESCRIPTION "The destination internetwork layer address for which this entry is defined." ::= { mpcEgressCacheEntry 3 } mpcEgressCachePrefixLen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Defines an equivalence class of addresses that match Prefix Length bit positions of the destination internetwork layer address." ::= { mpcEgressCacheEntry 4 } mpcEgressCacheEntryState OBJECT-TYPE SYNTAX INTEGER { doesNotExist(1), inactive(2), active (3), negative (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The present state of this MPC egress cache entry. The states are: doesNotExist (1) -- the state is not yet available, inactive (2) -- state exists, entry is not yet active, active (3) -- state exists, entry is active. For example,if using the Finite State Machine in Appendix 1.5, the states active and flooding are `active' state. negative (4) -- state exists, entry is negative. For example,if using the Finite State Machine in Appendix 1.5, the state purging is `negative'." REFERENCE "MPOA Letter Ballot, Appendix I.5." ::= { mpcEgressCacheEntry 5 } mpcEgressCacheEgressCacheTagValid OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "If the value of this object is true(1), then a valid Egress Cache Tag is present and the value of the Egress Cache Tag is in mpcEgressCacheEgressCacheTag. Otherwise, if this value is false(2), then there was no Egress Cache Tag, and the value of mpcEgressCacheEgressCacheTag is undefined." ::= { mpcEgressCacheEntry 6 } mpcEgressCacheEgressCacheTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If a valid Egress Cache Tag is present, then this object contains the value of that tag. To determine if this object contains a valid value, mpcEgressCacheEgressCacheTagValid should be used." ::= { mpcEgressCacheEntry 7 } mpcEgressCacheHoldTime OBJECT-TYPE -- SYNTAX TimeInterval SYNTAX INTEGER -- snmp v1 ACCESS read-only STATUS mandatory DESCRIPTION "The remaining time for which this entry is valid." ::= { mpcEgressCacheEntry 8 } mpcEgressCacheDataLinkHeader OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The DataLink header that the egress client rebuilds the original DataLink packet with." ::= { mpcEgressCacheEntry 9 } mpcEgressCacheIngressMpcDataAtmAddr OBJECT-TYPE SYNTAX AtmAddr ACCESS read-only STATUS mandatory DESCRIPTION "The Data ATM Address of the ingress MPC that issued the MPOA Resolution request" REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 81." ::= { mpcEgressCacheEntry 10 } mpcEgressCacheLecIndex OBJECT-TYPE SYNTAX LecIndex ACCESS read-only STATUS mandatory DESCRIPTION "This is the lecIndex of the LANE Client that this flow is associated with. This can be used to get the ELAN name as well as other LANE parameters." ::= { mpcEgressCacheEntry 11 } mpcEgressCacheServiceCategory OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is a bitmap describing the service categories supported for this shortcut. This value represents an inclusive OR of the bits: bit 1 - if rt-VBR is supported, bit 2 - if nrt-VBR is supported, bit 4 - if ABR is supported, bit 8 - if CBR is supported A value of 0 (zero) indicates that UBR is supported." REFERENCE "Lane V2 LUNI TLVs. AF-LANE-0084, page 122." ::= { mpcEgressCacheEntry 12 } -- -- end of MPOA Client Objects -- END