-- Wellfleet-Series7-MIB -- Creation date : Tue Oct 4 13:35:35 EDT 1994 -- Series 7 Software Release: 8.00 -- Copyright 1994 Wellfleet Communications, Inc. All Rights -- Reserved. Reproduction of this document is authorized on -- condition that the foregoing copyright notice is included. -- This Wellfleet SNMP Management Information Base Specification -- (Specification) embodies Wellfleet's confidential and -- proprietary intellectual property. Wellfleet retains all -- title and ownership in the Specification, including any -- revisions. -- -- It is Wellfleet's intent to encourage the widespread use of -- this Specification in connection with the management of -- Wellfleet products. Wellfleet grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of Wellfleet products utilizing series 7.xx system software. -- -- This Specification is supplied "AS IS", and Wellfleet makes -- no warranty, either expressed or implied, as to the use, -- operation, condition, or performance of the Specification. -- Copyright text courtesy of D. Perkins. Wellfleet-Series7-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter, Gauge, TimeTicks, Opaque, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; DisplayString ::= OCTET STRING wellfleet OBJECT IDENTIFIER ::= { enterprises 18 } wfSwSeries7 OBJECT IDENTIFIER ::= { wellfleet 3 } wfHardwareConfig OBJECT IDENTIFIER ::= { wfSwSeries7 1 } wfHwModuleGroup OBJECT IDENTIFIER ::= { wfHardwareConfig 4 } wfSoftwareConfig OBJECT IDENTIFIER ::= { wfSwSeries7 2 } wfSystem OBJECT IDENTIFIER ::= { wfSwSeries7 3 } wfServices OBJECT IDENTIFIER ::= { wfSystem 2 } wfPacketGenGroup OBJECT IDENTIFIER ::= { wfServices 4 } wfGameGroup OBJECT IDENTIFIER ::= { wfServices 5 } wfStaGroup OBJECT IDENTIFIER ::= { wfServices 6 } wfMibHeapGroup OBJECT IDENTIFIER ::= { wfServices 7 } wfCircuitNameExtension OBJECT IDENTIFIER ::= { wfServices 9 } wfNetBootGroup OBJECT IDENTIFIER ::= { wfServices 10 } wfSerialPortGroup OBJECT IDENTIFIER ::= { wfServices 11 } wfFileSystemGroup OBJECT IDENTIFIER ::= { wfServices 12 } wfLine OBJECT IDENTIFIER ::= { wfSwSeries7 4 } wfHwFGroup OBJECT IDENTIFIER ::= { wfLine 6 } wfMcT1Group OBJECT IDENTIFIER ::= { wfLine 8 } wfDs1E1Group OBJECT IDENTIFIER ::= { wfLine 9 } wfDs1Group OBJECT IDENTIFIER ::= { wfLine 12 } wfDs3Group OBJECT IDENTIFIER ::= { wfLine 13 } wfSipGroup OBJECT IDENTIFIER ::= { wfLine 14 } wfSipPlcpGroup OBJECT IDENTIFIER ::= { wfSipGroup 2 } wfFddiGroup OBJECT IDENTIFIER ::= { wfLine 15 } wfFddiSmtGroup OBJECT IDENTIFIER ::= { wfFddiGroup 1 } wfFddiMacGroup OBJECT IDENTIFIER ::= { wfFddiGroup 2 } wfFddiPathGroup OBJECT IDENTIFIER ::= { wfFddiGroup 3 } wfFddiPortGroup OBJECT IDENTIFIER ::= { wfFddiGroup 4 } wfPktCaptureGroup OBJECT IDENTIFIER ::= { wfLine 21 } wfApplication OBJECT IDENTIFIER ::= { wfSwSeries7 5 } wfDataLink OBJECT IDENTIFIER ::= { wfApplication 1 } wfBridgeGroup OBJECT IDENTIFIER ::= { wfDataLink 1 } wfBrLearning OBJECT IDENTIFIER ::= { wfBridgeGroup 1 } wfBrSourceRouting OBJECT IDENTIFIER ::= { wfBridgeGroup 2 } wfSpanningTree OBJECT IDENTIFIER ::= { wfDataLink 2 } wfIfGroup OBJECT IDENTIFIER ::= { wfDataLink 3 } wfCircuitOptsGroup OBJECT IDENTIFIER ::= { wfDataLink 4 } wfDlsGroup OBJECT IDENTIFIER ::= { wfDataLink 5 } wfLlcGroup OBJECT IDENTIFIER ::= { wfDataLink 6 } wfDecGroup OBJECT IDENTIFIER ::= { wfApplication 2 } wfInternet OBJECT IDENTIFIER ::= { wfApplication 3 } wfArpGroup OBJECT IDENTIFIER ::= { wfInternet 1 } wfIpRouting OBJECT IDENTIFIER ::= { wfInternet 2 } wfIpGroup OBJECT IDENTIFIER ::= { wfIpRouting 1 } wfRipGroup OBJECT IDENTIFIER ::= { wfIpRouting 2 } wfOspfGroup OBJECT IDENTIFIER ::= { wfIpRouting 3 } wfEgpGroup OBJECT IDENTIFIER ::= { wfIpRouting 4 } wfBgpGroup OBJECT IDENTIFIER ::= { wfIpRouting 5 } wfBgpGeneralGroup OBJECT IDENTIFIER ::= { wfBgpGroup 1 } wfBgp3Group OBJECT IDENTIFIER ::= { wfBgpGroup 2 } wfBgp4Group OBJECT IDENTIFIER ::= { wfBgpGroup 3 } wfIpPolicyGroup OBJECT IDENTIFIER ::= { wfIpRouting 6 } wfTcpGroup OBJECT IDENTIFIER ::= { wfInternet 3 } wfUdpGroup OBJECT IDENTIFIER ::= { wfInternet 4 } wfSnmpGroup OBJECT IDENTIFIER ::= { wfInternet 5 } wfTelnetGroup OBJECT IDENTIFIER ::= { wfInternet 7 } wfBootpGroup OBJECT IDENTIFIER ::= { wfInternet 8 } wfBootpClientGroup OBJECT IDENTIFIER ::= { wfBootpGroup 1 } wfBootpServerGroup OBJECT IDENTIFIER ::= { wfBootpGroup 2 } wfBootpRelayAgentGroup OBJECT IDENTIFIER ::= { wfBootpGroup 3 } wfRarpGroup OBJECT IDENTIFIER ::= { wfInternet 9 } wfAppletalkGroup OBJECT IDENTIFIER ::= { wfApplication 4 } wfIpxGroup OBJECT IDENTIFIER ::= { wfApplication 5 } wfOsiGroup OBJECT IDENTIFIER ::= { wfApplication 6 } wfVinesGroup OBJECT IDENTIFIER ::= { wfApplication 8 } wfWanGroup OBJECT IDENTIFIER ::= { wfApplication 9 } wfFrameRelayGroup OBJECT IDENTIFIER ::= { wfWanGroup 1 } wfPppGroup OBJECT IDENTIFIER ::= { wfWanGroup 2 } wfX25Group OBJECT IDENTIFIER ::= { wfWanGroup 4 } wfAtmGroup OBJECT IDENTIFIER ::= { wfWanGroup 5 } wfFrswGroup OBJECT IDENTIFIER ::= { wfWanGroup 6 } wfSmdsSwGroup OBJECT IDENTIFIER ::= { wfWanGroup 7 } wfIsdnGroup OBJECT IDENTIFIER ::= { wfWanGroup 8 } wfFrameRelay2Group OBJECT IDENTIFIER ::= { wfWanGroup 9 } wfXnsGroup OBJECT IDENTIFIER ::= { wfApplication 10 } wfTestGroup OBJECT IDENTIFIER ::= { wfApplication 11 } wfLanManagerGroup OBJECT IDENTIFIER ::= { wfApplication 12 } wfAppleBase OBJECT IDENTIFIER ::= { wfAppletalkGroup 1 } wfIpTrafficFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " IP Traffic Filters " ::= { wfIpGroup 7 } wfIpTrafficFilterEntry OBJECT-TYPE SYNTAX WfIpTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A traffic filter definition " INDEX { wfIpTrafficFilterInterface, wfIpTrafficFilterCircuit, wfIpTrafficFilterRuleNumber, wfIpTrafficFilterFragment } ::= { wfIpTrafficFilterTable 1 } WfIpTrafficFilterEntry ::= SEQUENCE { wfIpTrafficFilterCreate INTEGER, wfIpTrafficFilterEnable INTEGER, wfIpTrafficFilterStatus INTEGER, wfIpTrafficFilterCounter Counter, wfIpTrafficFilterDefinition Opaque, wfIpTrafficFilterReserved INTEGER, wfIpTrafficFilterInterface IpAddress, wfIpTrafficFilterCircuit INTEGER, wfIpTrafficFilterRuleNumber INTEGER, wfIpTrafficFilterFragment INTEGER, wfIpTrafficFilterName DisplayString } wfIpTrafficFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. " DEFVAL { created } ::= { wfIpTrafficFilterEntry 1 } wfIpTrafficFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. " DEFVAL { enabled } ::= { wfIpTrafficFilterEntry 2 } wfIpTrafficFilterStatus OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. " DEFVAL { inactive } ::= { wfIpTrafficFilterEntry 3 } wfIpTrafficFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of received packets that have matched this rule. " ::= { wfIpTrafficFilterEntry 4 } wfIpTrafficFilterDefinition OBJECT-TYPE SYNTAX Opaque ACCESS read-write STATUS mandatory DESCRIPTION " The filter rule definition. " ::= { wfIpTrafficFilterEntry 5 } wfIpTrafficFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Reserved field. " ::= { wfIpTrafficFilterEntry 6 } wfIpTrafficFilterInterface OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The network address of the IP interface to which this filter is applied. " ::= { wfIpTrafficFilterEntry 7 } wfIpTrafficFilterCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The ID of the Circuit to which the filter is applied. " ::= { wfIpTrafficFilterEntry 8 } wfIpTrafficFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " ID for the rule. " ::= { wfIpTrafficFilterEntry 9 } wfIpTrafficFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Fragment number - for large rules. " ::= { wfIpTrafficFilterEntry 10 } wfIpTrafficFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " name of the rule number " ::= { wfIpTrafficFilterEntry 11 } wfCctOptsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table of circuit names " ::= { wfCircuitOptsGroup 1 } wfCctOptsEntry OBJECT-TYPE SYNTAX WfCctOptsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Entry format for the table of circuit options " INDEX { wfCctOptsCct } ::= { wfCctOptsTable 1 } WfCctOptsEntry ::= SEQUENCE { wfCctOptsDelete INTEGER, wfCctOptsPriorityQueueingDisable INTEGER, wfCctOptsCct INTEGER, wfCctOptsHighPriorityQueueLimit INTEGER, wfCctOptsNormalPriorityQueueLimit INTEGER, wfCctOptsLowPriorityQueueLimit INTEGER, wfCctOptsMaxInterruptQueueLatency INTEGER, wfCctOptsMaxHighPriorityQueueLatency INTEGER, wfCctOptsHiXmits Counter, wfCctOptsNormalXmits Counter, wfCctOptsLoXmits Counter, wfCctOptsHiClippedPkts Counter, wfCctOptsNormalClippedPkts Counter, wfCctOptsLoClippedPkts Counter, wfCctOptsIntrQHighWaterPkts Gauge, wfCctOptsHiQHighWaterPkts Gauge, wfCctOptsNormalQHighWaterPkts Gauge, wfCctOptsLoQHighWaterPkts Gauge, wfCctOptsHighWaterPktsClear INTEGER, wfCctOptsDroppedPkts Counter, wfCctOptsLargePkts Counter, wfCctOptsRxPkts Counter, wfCctOptsChooserType INTEGER, wfCctOptsPqDequeueAlgType INTEGER, wfCctOptsHiPercent INTEGER, wfCctOptsNormalPercent INTEGER, wfCctOptsLoPercent INTEGER, wfCctOptsHiTotalOctets Counter, wfCctOptsNormalTotalOctets Counter, wfCctOptsLoTotalOctets Counter, wfCctOptsCircuitType INTEGER, wfCctOptsBackupCct INTEGER, wfCctOptsPrimaryCctWanProtocolType INTEGER } wfCctOptsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Creation and deletion flag for this record " DEFVAL { created } ::= { wfCctOptsEntry 1 } wfCctOptsPriorityQueueingDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Priority Queuing option " DEFVAL { enabled } ::= { wfCctOptsEntry 2 } wfCctOptsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " circuit number " ::= { wfCctOptsEntry 3 } wfCctOptsHighPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION " High Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) " DEFVAL { default } ::= { wfCctOptsEntry 4 } wfCctOptsNormalPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION " Normal Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) " DEFVAL { default } ::= { wfCctOptsEntry 5 } wfCctOptsLowPriorityQueueLimit OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION " Low Priority Queue limit The minimum valid value is zero. no maximum valid value (limited by bufs for the slot) " DEFVAL { default } ::= { wfCctOptsEntry 6 } wfCctOptsMaxInterruptQueueLatency OBJECT-TYPE SYNTAX INTEGER { minimum(100), default(2500), maximum(5000) } ACCESS read-write STATUS mandatory DESCRIPTION " Interrupt Queue Latency " DEFVAL { default } ::= { wfCctOptsEntry 7 } wfCctOptsMaxHighPriorityQueueLatency OBJECT-TYPE SYNTAX INTEGER { minimum(100), default(250), maximum(5000) } ACCESS read-write STATUS mandatory DESCRIPTION " High Priority Queue Latency " DEFVAL { default } ::= { wfCctOptsEntry 8 } wfCctOptsHiXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " High Priority Transmit count " ::= { wfCctOptsEntry 9 } wfCctOptsNormalXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Normal Priority Transmit count " ::= { wfCctOptsEntry 10 } wfCctOptsLoXmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Low Priority Transmit count " ::= { wfCctOptsEntry 11 } wfCctOptsHiClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " High Prio Transmit Clip Count " ::= { wfCctOptsEntry 12 } wfCctOptsNormalClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Normal Prio Transmit Clip Count " ::= { wfCctOptsEntry 13 } wfCctOptsLoClippedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Low Prio Transmit Clip Count " ::= { wfCctOptsEntry 14 } wfCctOptsIntrQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Interrupt Queue high-water mark " ::= { wfCctOptsEntry 15 } wfCctOptsHiQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " High-priority Queue high-water mark " ::= { wfCctOptsEntry 16 } wfCctOptsNormalQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Normal Queue high-water mark " ::= { wfCctOptsEntry 17 } wfCctOptsLoQHighWaterPkts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Low-priority Queue high-water mark " ::= { wfCctOptsEntry 18 } wfCctOptsHighWaterPktsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero. " ::= { wfCctOptsEntry 19 } wfCctOptsDroppedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Packets which were filtered in Priority Queueing " ::= { wfCctOptsEntry 20 } wfCctOptsLargePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Large Packets which became an exception to latency rules " ::= { wfCctOptsEntry 21 } wfCctOptsRxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Packets received " ::= { wfCctOptsEntry 22 } wfCctOptsChooserType OBJECT-TYPE SYNTAX INTEGER { random(1), addrbased(2), bod(3), filterbased(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Algorithm to choose line within a multiline circuit " DEFVAL { addrbased } ::= { wfCctOptsEntry 23 } wfCctOptsPqDequeueAlgType OBJECT-TYPE SYNTAX INTEGER { prioritization(1), allocation(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Selection of Priority Queueing dequeueing algorithm PQ_STRICT_PRIORITIZATION is 'classical' 7.50 dequeueing. PQ_BANDWIDTH_ALLOCATION makes exceptions to strict prioritization in order to prevent starvation of the Normal and/or Low priority traffic. " DEFVAL { allocation } ::= { wfCctOptsEntry 24 } wfCctOptsHiPercent OBJECT-TYPE SYNTAX INTEGER { default(70) } ACCESS read-write STATUS mandatory DESCRIPTION " This is the percent of the SYNC line bandwidth that the network manager wishes to allocate to traffic which has been configured to be High Priority. This parameter only has meaning when the bandwidth allocation dequeueing algorithm is enabled by setting the dequeueing algorithm type appropriately. With this parameter set other than 100, each time the configured percent utilization is reached, Normal and Low traffic is sent out (if any is queued up), up to their configured percentages. " DEFVAL { default } ::= { wfCctOptsEntry 25 } wfCctOptsNormalPercent OBJECT-TYPE SYNTAX INTEGER { default(20) } ACCESS read-write STATUS mandatory DESCRIPTION " The minimum percent of the SYNC line that Normal-priority traffic will get (if there is any) when the Bandwidth Allocation feature is enabled. See text for wfCctOptsHiPercent for more information. " DEFVAL { default } ::= { wfCctOptsEntry 26 } wfCctOptsLoPercent OBJECT-TYPE SYNTAX INTEGER { default(10) } ACCESS read-write STATUS mandatory DESCRIPTION " The minimum percent of the SYNC line that Low-priority traffic will get (if there is any) when the Bandwidth Allocation feature is enabled. See text for wfCctOptsHiPercent for more information. " DEFVAL { default } ::= { wfCctOptsEntry 27 } wfCctOptsHiTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm " ::= { wfCctOptsEntry 28 } wfCctOptsNormalTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm " ::= { wfCctOptsEntry 29 } wfCctOptsLoTotalOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm " ::= { wfCctOptsEntry 30 } wfCctOptsCircuitType OBJECT-TYPE SYNTAX INTEGER { normal(1), primary(2), dialondemand(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Circuit Type Attribute " DEFVAL { normal } ::= { wfCctOptsEntry 31 } wfCctOptsBackupCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " backup circuit number " ::= { wfCctOptsEntry 32 } wfCctOptsPrimaryCctWanProtocolType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ppp(2), relay(3), sync(4) } ACCESS read-write STATUS mandatory DESCRIPTION " The type of WAN protocol type which is running on the primary line. This attribute is only read when a dial backup circuit is using this mib record. " DEFVAL { unknown } ::= { wfCctOptsEntry 33 } wfCctOptsBrFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsBrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Bridge Filters " ::= { wfCircuitOptsGroup 2 } wfCctOptsBrFilterEntry OBJECT-TYPE SYNTAX WfCctOptsBrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in WfCctOptsBrFilterTable. " INDEX { wfCctOptsBrFilterCct, wfCctOptsBrFilterRuleNumber, wfCctOptsBrFilterFragment } ::= { wfCctOptsBrFilterTable 1 } WfCctOptsBrFilterEntry ::= SEQUENCE { wfCctOptsBrFilterCreate INTEGER, wfCctOptsBrFilterEnable INTEGER, wfCctOptsBrFilterState INTEGER, wfCctOptsBrFilterCounter Counter, wfCctOptsBrFilterDefinition OCTET STRING, wfCctOptsBrFilterReserved INTEGER, wfCctOptsBrFilterCct INTEGER, wfCctOptsBrFilterRuleNumber INTEGER, wfCctOptsBrFilterFragment INTEGER, wfCctOptsBrFilterName DisplayString } wfCctOptsBrFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. " DEFVAL { created } ::= { wfCctOptsBrFilterEntry 1 } wfCctOptsBrFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. " DEFVAL { enabled } ::= { wfCctOptsBrFilterEntry 2 } wfCctOptsBrFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. " DEFVAL { inactive } ::= { wfCctOptsBrFilterEntry 3 } wfCctOptsBrFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of received packets that have matched this rule. " ::= { wfCctOptsBrFilterEntry 4 } wfCctOptsBrFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The filter rule definition. " ::= { wfCctOptsBrFilterEntry 5 } wfCctOptsBrFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Reserved field. " ::= { wfCctOptsBrFilterEntry 6 } wfCctOptsBrFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The ID of the CctBridge Cct to which the filter is applied. " ::= { wfCctOptsBrFilterEntry 7 } wfCctOptsBrFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " ID for the rule. " ::= { wfCctOptsBrFilterEntry 8 } wfCctOptsBrFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Fragment number - for large rules. " ::= { wfCctOptsBrFilterEntry 9 } wfCctOptsBrFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " name of the rule number " ::= { wfCctOptsBrFilterEntry 10 } wfCctOptsIpFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Ip Filters " ::= { wfCircuitOptsGroup 3 } wfCctOptsIpFilterEntry OBJECT-TYPE SYNTAX WfCctOptsIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in WfCctOptsIpFilterTable. " INDEX { wfCctOptsIpFilterCct, wfCctOptsIpFilterRuleNumber, wfCctOptsIpFilterFragment } ::= { wfCctOptsIpFilterTable 1 } WfCctOptsIpFilterEntry ::= SEQUENCE { wfCctOptsIpFilterCreate INTEGER, wfCctOptsIpFilterEnable INTEGER, wfCctOptsIpFilterState INTEGER, wfCctOptsIpFilterCounter Counter, wfCctOptsIpFilterDefinition OCTET STRING, wfCctOptsIpFilterReserved INTEGER, wfCctOptsIpFilterCct INTEGER, wfCctOptsIpFilterRuleNumber INTEGER, wfCctOptsIpFilterFragment INTEGER, wfCctOptsIpFilterName DisplayString } wfCctOptsIpFilterCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. " DEFVAL { created } ::= { wfCctOptsIpFilterEntry 1 } wfCctOptsIpFilterEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. " DEFVAL { enabled } ::= { wfCctOptsIpFilterEntry 2 } wfCctOptsIpFilterState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. " DEFVAL { inactive } ::= { wfCctOptsIpFilterEntry 3 } wfCctOptsIpFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of received packets that have matched this rule. " ::= { wfCctOptsIpFilterEntry 4 } wfCctOptsIpFilterDefinition OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The filter rule definition. " ::= { wfCctOptsIpFilterEntry 5 } wfCctOptsIpFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Reserved field. " ::= { wfCctOptsIpFilterEntry 6 } wfCctOptsIpFilterCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The ID of the CctIp Cct to which the filter is applied. " ::= { wfCctOptsIpFilterEntry 7 } wfCctOptsIpFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " ID for the rule. " ::= { wfCctOptsIpFilterEntry 8 } wfCctOptsIpFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Fragment number - for large rules. " ::= { wfCctOptsIpFilterEntry 9 } wfCctOptsIpFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " name of the rule number " ::= { wfCctOptsIpFilterEntry 10 } wfCctOptsLengthBasedTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCctOptsLengthBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Length Based Priority Table " ::= { wfCircuitOptsGroup 4 } wfCctOptsLengthBasedEntry OBJECT-TYPE SYNTAX WfCctOptsLengthBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in WfCctOptsLengthBasedTable. " INDEX { wfCctOptsLengthBasedCct, wfCctOptsLengthBasedMux, wfCctOptsLengthBasedData } ::= { wfCctOptsLengthBasedTable 1 } WfCctOptsLengthBasedEntry ::= SEQUENCE { wfCctOptsLengthBasedDelete INTEGER, wfCctOptsLengthBasedDisable INTEGER, wfCctOptsLengthBasedState INTEGER, wfCctOptsLengthBasedCct INTEGER, wfCctOptsLengthBasedMux INTEGER, wfCctOptsLengthBasedData OCTET STRING, wfCctOptsLengthBasedLength INTEGER, wfCctOptsLengthBasedLessThanQ INTEGER, wfCctOptsLengthBasedGreaterThanQ INTEGER } wfCctOptsLengthBasedDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the existence of the length based priority filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted. " DEFVAL { created } ::= { wfCctOptsLengthBasedEntry 1 } wfCctOptsLengthBasedDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines whether or not the length based priority filter rule should be used: enabled - activate the rule. disabled - inactivate the rule. " DEFVAL { enabled } ::= { wfCctOptsLengthBasedEntry 2 } wfCctOptsLengthBasedState OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Defines the current State of the length based priority filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule. " DEFVAL { inactive } ::= { wfCctOptsLengthBasedEntry 3 } wfCctOptsLengthBasedCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The ID of the Cct to which the filter is applied " ::= { wfCctOptsLengthBasedEntry 4 } wfCctOptsLengthBasedMux OBJECT-TYPE SYNTAX INTEGER { etype(1), lsap(2), snap(3) } ACCESS read-only STATUS mandatory DESCRIPTION " packet mux type " ::= { wfCctOptsLengthBasedEntry 5 } wfCctOptsLengthBasedData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " a five byte quantity of the form ethernet - 0x6003000000 (e.g. DECnet) lsap - 0xfefe030000 (e.g. OSI) snap - 0x0000000800 (e.g. IP) - 0x0800070800 (e.g. Appletalk DDP) " ::= { wfCctOptsLengthBasedEntry 6 } wfCctOptsLengthBasedLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Maximum length of a packet to be considered high priority " ::= { wfCctOptsLengthBasedEntry 7 } wfCctOptsLengthBasedLessThanQ OBJECT-TYPE SYNTAX INTEGER { hi(3), normal(2), lo(1) } ACCESS read-write STATUS mandatory DESCRIPTION " queue into which packets of length less than or equal wfCctOptsLengthBasedLength are placed " DEFVAL { normal } ::= { wfCctOptsLengthBasedEntry 8 } wfCctOptsLengthBasedGreaterThanQ OBJECT-TYPE SYNTAX INTEGER { hi(3), normal(2), lo(1) } ACCESS read-write STATUS mandatory DESCRIPTION " queue into which packets of length greater than wfCctOptsLengthBasedLength are placed " DEFVAL { lo } ::= { wfCctOptsLengthBasedEntry 9 } wfCircuitNameTable OBJECT-TYPE SYNTAX SEQUENCE OF WfCircuitNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table of circuit names " ::= { wfServices 3 } wfCircuitNameEntry OBJECT-TYPE SYNTAX WfCircuitNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Entry format for the table of circuit names " INDEX { wfCircuitNumber } ::= { wfCircuitNameTable 1 } WfCircuitNameEntry ::= SEQUENCE { wfCircuitNameDelete INTEGER, wfCircuitNumber INTEGER, wfCircuitName DisplayString, wfCircuitIfType INTEGER, wfCircuitProtoMap OCTET STRING, wfCircuitType INTEGER, wfCircuitRelCctList OCTET STRING, wfCircuitLineList OCTET STRING } wfCircuitNameDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Creation and deletion flag for this record " DEFVAL { create } ::= { wfCircuitNameEntry 1 } wfCircuitNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " circuit number " ::= { wfCircuitNameEntry 2 } wfCircuitName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " circuit name " ::= { wfCircuitNameEntry 3 } wfCircuitIfType OBJECT-TYPE SYNTAX INTEGER { csmacd(10), sync(20), t1(30), e1(40), token(50), fddi(60), hssi(70), mct1(80), ds1e1(90), none(100) } ACCESS read-write STATUS mandatory DESCRIPTION " circuit interface type " ::= { wfCircuitNameEntry 4 } wfCircuitProtoMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "CIRCUIT_PROTO_BRIDGE 1 CIRCUIT_PROTO_SPANTREE 2 CIRCUIT_PROTO_IP 3 CIRCUIT_PROTO_RIP 4 CIRCUIT_PROTO_EGP 5 CIRCUIT_PROTO_OSPF 6 CIRCUIT_PROTO_SNMP 7 CIRCUIT_PROTO_TFTP 8 CIRCUIT_PROTO_TCP 9 CIRCUIT_PROTO_DECNET4 10 CIRCUIT_PROTO_VINES 11 CIRCUIT_PROTO_SMDS 12 CIRCUIT_PROTO_FR 13 CIRCUIT_PROTO_IPX 14 CIRCUIT_PROTO_IPX_RIP 15 CIRCUIT_PROTO_XNS 16 CIRCUIT_PROTO_XNS_RIP 17 CIRCUIT_PROTO_AT 18 CIRCUIT_PROTO_SR 19 CIRCUIT_PROTO_FR_VC 20 CIRCUIT_PROTO_PRI_Q 21 CIRCUIT_PROTO_PPP 22 CIRCUIT_PROTO_OSI 23 CIRCUIT_PROTO_LLC2 24 CIRCUIT_PROTO_LNM 25 CIRCUIT_PROTO_X25 26 CIRCUIT_PROTO_ATM 27 CIRCUIT_PROTO_ATM_VC 28 CIRCUIT_PROTO_TELNET 29 CIRCUIT_PROTO_STA 30 CIRCUIT_PROTO_BGP 31 CIRCUIT_PROTO_DLS 32 CIRCUIT_PROTO_RARP 33 CIRCUIT_PROTO_BOOTP 34 CIRCUIT_PROTO_LLC2_VC 35 CIRCUIT_PROTO_AURP 36 CIRCUIT_PROTO_X25_VC 37 CIRCUIT_PROTO_DEMAND 38 CIRCUIT_PROTO_CL_IP 39 CIRCUIT_PROTO_PROXY 40 CIRCUIT_PROTO_TELNET_CLIENT 41 CIRCUIT_PROTO_SW_LAPB 42 CIRCUIT_DUMMY1 43 CIRCUIT_DUMMY2 44 CIRCUIT_DUMMY3 45 CIRCUIT_DUMMY4 46 CIRCUIT_DUMMY5 47 CIRCUIT_PROTO_SWSMDS 48 CIRCUIT_PROTO_FRSW_CONG 49 CIRCUIT_PROTO_SW_PROXY 50 CIRCUIT_BNX_RESERVE 51 NUMBER_OF_PROTOCOLS 51 " ::= { wfCircuitNameEntry 5 } wfCircuitType OBJECT-TYPE SYNTAX INTEGER { normal(1), virtual(2), master(3), clip(4) } ACCESS read-write STATUS mandatory DESCRIPTION " The circuit type " DEFVAL { normal } ::= { wfCircuitNameEntry 6 } wfCircuitRelCctList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The related circuit list for this circuit: only valid if wfCircuitType is either CIRCUIT_REL_VIRTUAL or CIRCUIT_REL_MASTER " ::= { wfCircuitNameEntry 7 } wfCircuitLineList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The line info list for this circuit " ::= { wfCircuitNameEntry 8 } wfFsBase OBJECT IDENTIFIER ::= { wfFileSystemGroup 1 } wfFsVolLastUpdated OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " Date and time the volume table was last updated " ::= { wfFsBase 1 } wfFsVols OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of rows in the volume table " ::= { wfFsBase 2 } wfFsVolTable OBJECT-TYPE SYNTAX SEQUENCE OF WfFsVolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Volume table " ::= { wfFileSystemGroup 2 } wfFsVolEntry OBJECT-TYPE SYNTAX WfFsVolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A row in the Volume table " INDEX { wfFsVolID } ::= { wfFsVolTable 1 } WfFsVolEntry ::= SEQUENCE { wfFsVolID INTEGER, wfFsSlot INTEGER, wfFsType INTEGER, wfFsRemoveable INTEGER, wfFsAccess INTEGER, wfFsState INTEGER, wfFsSize Gauge, wfFsFreeSize Gauge, wfFsContigFree Gauge, wfFsNumFiles Gauge, wfFsLastWritten OCTET STRING, wfFsBecameActive OCTET STRING, wfFsAction INTEGER, wfFsActionArg OBJECT IDENTIFIER } wfFsVolID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Volume number " ::= { wfFsVolEntry 1 } wfFsSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Processor owning the volume " ::= { wfFsVolEntry 2 } wfFsType OBJECT-TYPE SYNTAX INTEGER { dos(1), nvfs(2), unix(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Type of volume - DOS, NVFS or UNIX " ::= { wfFsVolEntry 3 } wfFsRemoveable OBJECT-TYPE SYNTAX INTEGER { remove(1), fixed(2) } ACCESS read-only STATUS mandatory DESCRIPTION " Can this file system be removed or is it a fixed file system " ::= { wfFsVolEntry 4 } wfFsAccess OBJECT-TYPE SYNTAX INTEGER { unknown(1), readonly(2), readwrite(3) } ACCESS read-only STATUS mandatory DESCRIPTION " Read only or read-write file system. DOS file systems are always set to unknown since we can't tell what the state is until we actually try to write to the disk. " ::= { wfFsVolEntry 5 } wfFsState OBJECT-TYPE SYNTAX INTEGER { ok(1), corrupt(2), busy(3), present(4), incomplete(5) } ACCESS read-only STATUS mandatory DESCRIPTION " The state that the file system is in. If it is corrupted then it is unusable, if it is busy, the MIB is being updated. Floppy not present is a state used in DOS only and means that the floppy isn't there or we couldn't mount it. Incomplete means that we got a mount for a DOS floppy duing boot, but because of 30 second timeouts in DOS, we are not willing to take the hit during boot. Fill in minimal information and let Site Manager do the 'DIR' that will fill in the rest. " ::= { wfFsVolEntry 6 } wfFsSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Physical size in bytes " ::= { wfFsVolEntry 7 } wfFsFreeSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Total available bytes " ::= { wfFsVolEntry 8 } wfFsContigFree OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The amount of contiguous bytes free. In DOS and UNIX, contiguous = free. In NVFS, this may not be true. " ::= { wfFsVolEntry 9 } wfFsNumFiles OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The number of files on this volume " ::= { wfFsVolEntry 10 } wfFsLastWritten OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " The last time a write request was written to this volume " ::= { wfFsVolEntry 11 } wfFsBecameActive OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " The date and time this volume became active " ::= { wfFsVolEntry 12 } wfFsAction OBJECT-TYPE SYNTAX INTEGER { dir(1), format(2), compact(3), purge(4) } ACCESS read-write STATUS mandatory DESCRIPTION " When set, performs a volume command (compact, format, dir, purge) " ::= { wfFsVolEntry 13 } wfFsActionArg OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION " Optional argument for directory action for viewing file hierarchies " ::= { wfFsVolEntry 14 } wfFsDirBase OBJECT IDENTIFIER ::= { wfFileSystemGroup 3 } wfFsDirEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Number of entries in the directory table " ::= { wfFsDirBase 1 } wfFsDirLastUpdated OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " Time the directory table was last updated " ::= { wfFsDirBase 2 } wfFsDirTable OBJECT-TYPE SYNTAX SEQUENCE OF WfFsDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Directory table " ::= { wfFileSystemGroup 5 } wfFsDirEntry OBJECT-TYPE SYNTAX WfFsDirEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in the directory table " INDEX { wfFsDirVolID, wfFsDirFileIndex } ::= { wfFsDirTable 1 } WfFsDirEntry ::= SEQUENCE { wfFsDirVolID INTEGER, wfFsDirFileIndex OBJECT IDENTIFIER, wfFsDirFileName DisplayString, wfFsDirCreated OCTET STRING, wfFsDirFileSize Gauge, wfFsDirFileMask Gauge } wfFsDirVolID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Volume number that this directory entry is contained on " ::= { wfFsDirEntry 1 } wfFsDirFileIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION " Hierarchical file index " ::= { wfFsDirEntry 2 } wfFsDirFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " Name of the file " ::= { wfFsDirEntry 3 } wfFsDirCreated OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " When the file was created " ::= { wfFsDirEntry 4 } wfFsDirFileSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Size of the file " ::= { wfFsDirEntry 5 } wfFsDirFileMask OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " Access mode on file for UNIX and DOS file systems " ::= { wfFsDirEntry 6 } wfIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The list of configured IP interface " ::= { wfIpGroup 4 } wfIpInterfaceEntry OBJECT-TYPE SYNTAX WfIpInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An IP interface description " INDEX { wfIpInterfaceAddr, wfIpInterfaceCircuit } ::= { wfIpInterfaceTable 1 } WfIpInterfaceEntry ::= SEQUENCE { wfIpInterfaceCreate INTEGER, wfIpInterfaceEnable INTEGER, wfIpInterfaceState INTEGER, wfIpInterfaceAddr IpAddress, wfIpInterfaceCircuit INTEGER, wfIpInterfaceMask IpAddress, wfIpInterfaceCost INTEGER, wfIpInterfaceCfgBcastAddr IpAddress, wfIpInterfaceBcastAddr IpAddress, wfIpInterfaceMTUDiscovery INTEGER, wfIpInterfaceAMR INTEGER, wfIpInterfaceASB INTEGER, wfIpInterfaceAddressResolutionType INTEGER, wfIpInterfaceProxy INTEGER, wfIpInterfaceHostCache INTEGER, wfIpInterfaceUdpXsumOn INTEGER, wfIpInterfaceCfgMacAddress OCTET STRING, wfIpInterfaceMacAddress OCTET STRING, wfIpInterfaceReasmMaxSize INTEGER, wfIpInterfaceMaxInfo INTEGER, wfIpInterfaceInReceives Counter, wfIpInterfaceInHdrErrors Counter, wfIpInterfaceInAddrErrors Counter, wfIpInterfaceForwDatagrams Counter, wfIpInterfaceInUnknownProtos Counter, wfIpInterfaceInDiscards Counter, wfIpInterfaceInDelivers Counter, wfIpInterfaceOutRequests Counter, wfIpInterfaceOutDiscards Counter, wfIpInterfaceOutNoRoutes Counter, wfIpInterfaceReasmTimeout INTEGER, wfIpInterfaceReasmReqds Counter, wfIpInterfaceReasmOKs Counter, wfIpInterfaceReasmFails Counter, wfIpInterfaceFragOKs Counter, wfIpInterfaceFragFails Counter, wfIpInterfaceFragCreates Counter, wfIpInterfaceIcmpInMsgs Counter, wfIpInterfaceIcmpInErrors Counter, wfIpInterfaceIcmpInDestUnreachs Counter, wfIpInterfaceIcmpInTimeExcds Counter, wfIpInterfaceIcmpInParmProbs Counter, wfIpInterfaceIcmpInSrcQuenchs Counter, wfIpInterfaceIcmpInRedirects Counter, wfIpInterfaceIcmpInEchos Counter, wfIpInterfaceIcmpInEchoReps Counter, wfIpInterfaceIcmpInTimestamps Counter, wfIpInterfaceIcmpInTimestampReps Counter, wfIpInterfaceIcmpInAddrMasks Counter, wfIpInterfaceIcmpInAddrMaskReps Counter, wfIpInterfaceIcmpOutMsgs Counter, wfIpInterfaceIcmpOutErrors Counter, wfIpInterfaceIcmpOutDestUnreachs Counter, wfIpInterfaceIcmpOutTimeExcds Counter, wfIpInterfaceIcmpOutParmProbs Counter, wfIpInterfaceIcmpOutSrcQuenchs Counter, wfIpInterfaceIcmpOutRedirects Counter, wfIpInterfaceIcmpOutEchos Counter, wfIpInterfaceIcmpOutEchoReps Counter, wfIpInterfaceIcmpOutTimestamps Counter, wfIpInterfaceIcmpOutTimestampReps Counter, wfIpInterfaceIcmpOutAddrMasks Counter, wfIpInterfaceIcmpOutAddrMaskReps Counter, wfIpInterfaceTrEndStation INTEGER, wfIpInterfaceSMDSGroupAddress OCTET STRING, wfIpInterfaceSMDSArpReqAddress OCTET STRING, wfIpInterfaceFRBcastDlci INTEGER, wfIpInterfaceFRMcast1Dlci INTEGER, wfIpInterfaceFRMcast2Dlci INTEGER, wfIpInterfaceRedirect INTEGER, wfIpInterfaceEnetArpEncaps INTEGER, wfIpInterfaceCacheMisses Counter, wfIpInterfaceCacheNetworks Counter, wfIpInterfaceCacheRemoves Counter, wfIpInterfaceSlotMask Gauge, wfIpInterfaceEnableSecurity INTEGER, wfIpInterfaceStripSecurity INTEGER, wfIpInterfaceRequireOutSecurity INTEGER, wfIpInterfaceRequireInSecurity INTEGER, wfIpInterfaceMinLevel INTEGER, wfIpInterfaceMaxLevel INTEGER, wfIpInterfaceMustOutAuthority OCTET STRING, wfIpInterfaceMayOutAuthority OCTET STRING, wfIpInterfaceMustInAuthority OCTET STRING, wfIpInterfaceMayInAuthority OCTET STRING, wfIpInterfaceImplicitLabelEnabled INTEGER, wfIpInterfaceImplicitAuth OCTET STRING, wfIpInterfaceImplicitLevel INTEGER, wfIpInterfaceDefaultLabelEnabled INTEGER, wfIpInterfaceDefaultAuth OCTET STRING, wfIpInterfaceDefaultLevel INTEGER, wfIpInterfaceErrorLabelEnabled INTEGER, wfIpInterfaceErrorAuth OCTET STRING, wfIpInterfaceDropRxAuths Counter, wfIpInterfaceDropRxFormats Counter, wfIpInterfaceDropRxLevels Counter, wfIpInterfaceDropRxNoIpsos Counter, wfIpInterfaceDropTxAuths Counter, wfIpInterfaceDropTxLevels Counter, wfIpInterfaceDropTxNoIpsos Counter, wfIpInterfaceDropTxNoIpsoRooms Counter, wfIpInterfaceICMPInAdminProhib Counter, wfIpInterfaceICMPOutAdminProhib Counter, wfIpInterfaceFwdCacheSize INTEGER, wfIpInterfaceTunnelInfo OCTET STRING, wfIpInterfaceIcmpInRdiscSolicit Counter, wfIpInterfaceIcmpInRdiscAdvert Counter, wfIpInterfaceIcmpOutRdiscAdvert Counter } wfIpInterfaceCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface." DEFVAL { create } ::= { wfIpInterfaceEntry 1 } wfIpInterfaceEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface." DEFVAL { enable } ::= { wfIpInterfaceEntry 2 } wfIpInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), invalid(4), notpres(5) } ACCESS read-only STATUS mandatory DESCRIPTION " INvalid indicates an error in processing the cfg record " DEFVAL { notpres } ::= { wfIpInterfaceEntry 3 } wfIpInterfaceAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The IP Address to which this entry's addressing information pertains " ::= { wfIpInterfaceEntry 4 } wfIpInterfaceCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The Circuit Number that this interface runs over" ::= { wfIpInterfaceEntry 5 } wfIpInterfaceMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { wfIpInterfaceEntry 6 } wfIpInterfaceCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The Cost metric associated with the IP Address of this entry " DEFVAL { 1 } ::= { wfIpInterfaceEntry 7 } wfIpInterfaceCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The user can specifcy a broadcast address for a NWIF " ::= { wfIpInterfaceEntry 8 } wfIpInterfaceBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. This is value used by the software " ::= { wfIpInterfaceEntry 9 } wfIpInterfaceMTUDiscovery OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Whether MTU discovery option is on/off " DEFVAL { off } ::= { wfIpInterfaceEntry 10 } wfIpInterfaceAMR OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Whether Address Mask Reply is ON/OFF " DEFVAL { off } ::= { wfIpInterfaceEntry 11 } wfIpInterfaceASB OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF " DEFVAL { off } ::= { wfIpInterfaceEntry 12 } wfIpInterfaceAddressResolutionType OBJECT-TYPE SYNTAX INTEGER { arp(1), ddn(3), pdn(4), inarp(5), arpinarp(6), none(7), bfeddn(8), probe(9), arpprobe(10) } ACCESS read-write STATUS mandatory DESCRIPTION " Indicates which Address Resolution Type to use " DEFVAL { arp } ::= { wfIpInterfaceEntry 13 } wfIpInterfaceProxy OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Indicates Whether Proxy is on this Interface or not " DEFVAL { off } ::= { wfIpInterfaceEntry 14 } wfIpInterfaceHostCache OBJECT-TYPE SYNTAX INTEGER { cacheoff(1), cache120(120), cache180(180), cache240(240), cache300(300), cache600(600), cache900(900), cache1200(1200) } ACCESS read-write STATUS mandatory DESCRIPTION " Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age " DEFVAL { cacheoff } ::= { wfIpInterfaceEntry 15 } wfIpInterfaceUdpXsumOn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router " DEFVAL { on } ::= { wfIpInterfaceEntry 16 } wfIpInterfaceCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The desired mac set by the user " ::= { wfIpInterfaceEntry 17 } wfIpInterfaceMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION " The MAC Address for this Interface- actual one used " ::= { wfIpInterfaceEntry 18 } wfIpInterfaceReasmMaxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { wfIpInterfaceEntry 19 } wfIpInterfaceMaxInfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum size of the INFO (non-MAC) field that this port will receive or transmit." ::= { wfIpInterfaceEntry 20 } wfIpInterfaceInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { wfIpInterfaceEntry 21 } wfIpInterfaceInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { wfIpInterfaceEntry 22 } wfIpInterfaceInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { wfIpInterfaceEntry 23 } wfIpInterfaceForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { wfIpInterfaceEntry 24 } wfIpInterfaceInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { wfIpInterfaceEntry 25 } wfIpInterfaceInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { wfIpInterfaceEntry 26 } wfIpInterfaceInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { wfIpInterfaceEntry 27 } wfIpInterfaceOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { wfIpInterfaceEntry 28 } wfIpInterfaceOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { wfIpInterfaceEntry 29 } wfIpInterfaceOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { wfIpInterfaceEntry 30 } wfIpInterfaceReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { wfIpInterfaceEntry 31 } wfIpInterfaceReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { wfIpInterfaceEntry 32 } wfIpInterfaceReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully reassembled." ::= { wfIpInterfaceEntry 33 } wfIpInterfaceReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { wfIpInterfaceEntry 34 } wfIpInterfaceFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { wfIpInterfaceEntry 35 } wfIpInterfaceFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { wfIpInterfaceEntry 36 } wfIpInterfaceFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { wfIpInterfaceEntry 37 } wfIpInterfaceIcmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which includes all those counted by wfIpInterfaceIcmpInErrors." ::= { wfIpInterfaceEntry 38 } wfIpInterfaceIcmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { wfIpInterfaceEntry 39 } wfIpInterfaceIcmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { wfIpInterfaceEntry 40 } wfIpInterfaceIcmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { wfIpInterfaceEntry 41 } wfIpInterfaceIcmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { wfIpInterfaceEntry 42 } wfIpInterfaceIcmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages received." ::= { wfIpInterfaceEntry 43 } wfIpInterfaceIcmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages received." ::= { wfIpInterfaceEntry 44 } wfIpInterfaceIcmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { wfIpInterfaceEntry 45 } wfIpInterfaceIcmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { wfIpInterfaceEntry 46 } wfIpInterfaceIcmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { wfIpInterfaceEntry 47 } wfIpInterfaceIcmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { wfIpInterfaceEntry 48 } wfIpInterfaceIcmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { wfIpInterfaceEntry 49 } wfIpInterfaceIcmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { wfIpInterfaceEntry 50 } wfIpInterfaceIcmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { wfIpInterfaceEntry 51 } wfIpInterfaceIcmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { wfIpInterfaceEntry 52 } wfIpInterfaceIcmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { wfIpInterfaceEntry 53 } wfIpInterfaceIcmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { wfIpInterfaceEntry 54 } wfIpInterfaceIcmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { wfIpInterfaceEntry 55 } wfIpInterfaceIcmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { wfIpInterfaceEntry 56 } wfIpInterfaceIcmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { wfIpInterfaceEntry 57 } wfIpInterfaceIcmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { wfIpInterfaceEntry 58 } wfIpInterfaceIcmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { wfIpInterfaceEntry 59 } wfIpInterfaceIcmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { wfIpInterfaceEntry 60 } wfIpInterfaceIcmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { wfIpInterfaceEntry 61 } wfIpInterfaceIcmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { wfIpInterfaceEntry 62 } wfIpInterfaceIcmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpInterfaceEntry 63 } wfIpInterfaceTrEndStation OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Use Source Routing over token ring selection. Only applies if pam type is TRING. " DEFVAL { off } ::= { wfIpInterfaceEntry 64 } wfIpInterfaceSMDSGroupAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The SMDS group address " ::= { wfIpInterfaceEntry 65 } wfIpInterfaceSMDSArpReqAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " The SMDS arp req address " ::= { wfIpInterfaceEntry 66 } wfIpInterfaceFRBcastDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Frame Relay broadcast dlci " ::= { wfIpInterfaceEntry 67 } wfIpInterfaceFRMcast1Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Frame Relay multicast dlci #1 " ::= { wfIpInterfaceEntry 68 } wfIpInterfaceFRMcast2Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Frame Relay multicast dlci #2 " ::= { wfIpInterfaceEntry 69 } wfIpInterfaceRedirect OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Indicates Whether we're sending out redirects on this Interface or not " DEFVAL { on } ::= { wfIpInterfaceEntry 70 } wfIpInterfaceEnetArpEncaps OBJECT-TYPE SYNTAX INTEGER { enet(1), snap(2), both(3), probelsap(4), probeenet(5), probeboth(6), arpenetprobelsap(7), arpsnapprobelsap(8), arpbothprobelsap(9) } ACCESS read-write STATUS mandatory DESCRIPTION " The data link encapsulation type to use for ARP packets if the the media is ethernet. " DEFVAL { enet } ::= { wfIpInterfaceEntry 71 } wfIpInterfaceCacheMisses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of FFT cache misses (i.e how many times did the cache gate have to do a look up in the RNP because the FFT didn't have the destination network " ::= { wfIpInterfaceEntry 72 } wfIpInterfaceCacheNetworks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of network entries in the FFT " ::= { wfIpInterfaceEntry 73 } wfIpInterfaceCacheRemoves OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of networks which have been flushed from the FFT because of aging " ::= { wfIpInterfaceEntry 74 } wfIpInterfaceSlotMask OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION " Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. This is only valid if wfIpInterfaceCircuit is 0. " DEFVAL { 4294705152 } ::= { wfIpInterfaceEntry 75 } wfIpInterfaceEnableSecurity OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enables RIPSO on this interface " DEFVAL { disable } ::= { wfIpInterfaceEntry 76 } wfIpInterfaceStripSecurity OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines which packets will have security option removed. This is a bit mask. " ::= { wfIpInterfaceEntry 77 } wfIpInterfaceRequireOutSecurity OBJECT-TYPE SYNTAX INTEGER { forwarded(1), originated(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines which types of outbound packets are required to have a security option. This is a bit mask. " DEFVAL { all } ::= { wfIpInterfaceEntry 78 } wfIpInterfaceRequireInSecurity OBJECT-TYPE SYNTAX INTEGER { yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines whether or not incoming packets must have security option. This is a bit mask. " ::= { wfIpInterfaceEntry 79 } wfIpInterfaceMinLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D " DEFVAL { unclassified } ::= { wfIpInterfaceEntry 80 } wfIpInterfaceMaxLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D " DEFVAL { topsecret } ::= { wfIpInterfaceEntry 81 } wfIpInterfaceMustOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 82 } wfIpInterfaceMayOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL. " ::= { wfIpInterfaceEntry 83 } wfIpInterfaceMustInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 84 } wfIpInterfaceMayInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL. " ::= { wfIpInterfaceEntry 85 } wfIpInterfaceImplicitLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Should an implicit label be associated with any inbound unlabelled datagrams? " DEFVAL { enabled } ::= { wfIpInterfaceEntry 86 } wfIpInterfaceImplicitAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if implicit labelling is enabled (wfIpInterfaceImplicitLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and implicit labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 87 } wfIpInterfaceImplicitLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D " DEFVAL { unclassified } ::= { wfIpInterfaceEntry 88 } wfIpInterfaceDefaultLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Should a default label be associated with any not-yet-labelled oubound datagrams? " DEFVAL { enabled } ::= { wfIpInterfaceEntry 89 } wfIpInterfaceDefaultAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if default labelling is enabled (wfIpInterfaceDefaultLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and default labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpInterfaceEntry 90 } wfIpInterfaceDefaultLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D " DEFVAL { unclassified } ::= { wfIpInterfaceEntry 91 } wfIpInterfaceErrorLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Should an error label be associated with any outbound ICMP error packets? " DEFVAL { enabled } ::= { wfIpInterfaceEntry 92 } wfIpInterfaceErrorAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if error labelling is enabled (wfIpInterfaceErrorLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and error labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE " ::= { wfIpInterfaceEntry 93 } wfIpInterfaceDropRxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of received packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified. " ::= { wfIpInterfaceEntry 94 } wfIpInterfaceDropRxFormats OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of received packets dropped because the security option format was invalid. " ::= { wfIpInterfaceEntry 95 } wfIpInterfaceDropRxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of received packets dropped because the classification level was out of range. " ::= { wfIpInterfaceEntry 96 } wfIpInterfaceDropRxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of received packets dropped because no IP security label was present. " ::= { wfIpInterfaceEntry 97 } wfIpInterfaceDropTxAuths OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of transmitted packets dropped because the authority flag(s) were not sufficient. This could mean that the 'must' flags were not all there, or that the flags other than the 'may' flags were specified. " ::= { wfIpInterfaceEntry 98 } wfIpInterfaceDropTxLevels OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of transmitted packets dropped because the classification level was out of range. " ::= { wfIpInterfaceEntry 99 } wfIpInterfaceDropTxNoIpsos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of packets not transmitted because no IP security label was present. " ::= { wfIpInterfaceEntry 100 } wfIpInterfaceDropTxNoIpsoRooms OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of packets not transmitted because there was not enough space left in the IP header to insert an IP security option. " ::= { wfIpInterfaceEntry 101 } wfIpInterfaceICMPInAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of ICMP dest unreachable/communication administratively prohibited messages received. Note: may be sent by BFE or another system " ::= { wfIpInterfaceEntry 102 } wfIpInterfaceICMPOutAdminProhib OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of ICMP dest unreachable/communication administratively prohibited messages sent. " ::= { wfIpInterfaceEntry 103 } wfIpInterfaceFwdCacheSize OBJECT-TYPE SYNTAX INTEGER { min(64), def(128), max(2048) } ACCESS read-write STATUS mandatory DESCRIPTION " Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface. " DEFVAL { def } ::= { wfIpInterfaceEntry 104 } wfIpInterfaceTunnelInfo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " If non-null and if wfIpInterfaceCircuit is zero, this string contains encoded information for setting up this interface as a tunnel endpoint. Currently, no underlying code has been implemented for this feature. " ::= { wfIpInterfaceEntry 105 } wfIpInterfaceIcmpInRdiscSolicit OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Router Discovery Solicit messages received." ::= { wfIpInterfaceEntry 106 } wfIpInterfaceIcmpInRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Router Discovery Advertisement messages received." ::= { wfIpInterfaceEntry 107 } wfIpInterfaceIcmpOutRdiscAdvert OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { wfIpInterfaceEntry 108 } -- -- Added from MIB 12.x IP.MIB -- wfIpIntfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpIntfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of configured IP interface " ::= { wfIpGroup 24 } wfIpIntfCfgEntry OBJECT-TYPE SYNTAX WfIpIntfCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An IP cfg interface description" INDEX { wfIpIntfCfgAddr, wfIpIntfCfgCircuit } ::= { wfIpIntfCfgTable 1 } WfIpIntfCfgEntry ::= SEQUENCE { wfIpIntfCfgAddr IpAddress, wfIpIntfCfgCircuit INTEGER, wfIpIntfCfgCreate INTEGER, wfIpIntfCfgEnable INTEGER, wfIpIntfCfgState INTEGER, wfIpIntfCfgMask IpAddress, wfIpIntfCfgCost INTEGER, wfIpIntfCfgCfgBcastAddr IpAddress, wfIpIntfCfgBcastAddr IpAddress, wfIpIntfCfgCfgMacAddress OCTET STRING, wfIpIntfCfgMacAddress OCTET STRING, wfIpIntfCfgMTUDiscovery INTEGER, wfIpIntfCfgAMR INTEGER, wfIpIntfCfgASB INTEGER, wfIpIntfCfgAddressResolutionType INTEGER, wfIpIntfCfgProxy INTEGER, wfIpIntfCfgHostCache INTEGER, wfIpIntfCfgUdpXsumOn INTEGER, wfIpIntfCfgTrEndStation INTEGER, wfIpIntfCfgSMDSGroupAddress OCTET STRING, wfIpIntfCfgSMDSArpReqAddress OCTET STRING, wfIpIntfCfgFRBcastDlci INTEGER, wfIpIntfCfgFRMcast1Dlci INTEGER, wfIpIntfCfgFRMcast2Dlci INTEGER, wfIpIntfCfgRedirect INTEGER, wfIpIntfCfgEnetArpEncaps INTEGER, wfIpIntfCfgSlotMask Gauge, wfIpIntfCfgEnableSecurity INTEGER, wfIpIntfCfgStripSecurity INTEGER, wfIpIntfCfgRequireOutSecurity INTEGER, wfIpIntfCfgRequireInSecurity INTEGER, wfIpIntfCfgMinLevel INTEGER, wfIpIntfCfgMaxLevel INTEGER, wfIpIntfCfgMustOutAuthority OCTET STRING, wfIpIntfCfgMayOutAuthority OCTET STRING, wfIpIntfCfgMustInAuthority OCTET STRING, wfIpIntfCfgMayInAuthority OCTET STRING, wfIpIntfCfgImplicitLabelEnabled INTEGER, wfIpIntfCfgImplicitAuth OCTET STRING, wfIpIntfCfgImplicitLevel INTEGER, wfIpIntfCfgDefaultLabelEnabled INTEGER, wfIpIntfCfgDefaultAuth OCTET STRING, wfIpIntfCfgDefaultLevel INTEGER, wfIpIntfCfgErrorLabelEnabled INTEGER, wfIpIntfCfgErrorAuth OCTET STRING, wfIpIntfCfgFwdCacheSize INTEGER, wfIpIntfCfgUnnumAsocAddr IpAddress, wfIpIntfCfgUnnumAsocAlt INTEGER, wfIpIntfCfgAtmArpMode INTEGER, wfIpIntfCfgAtmArpSrvAddress OCTET STRING, wfIpIntfCfgAtmArpSrvVcAgingEnable INTEGER, wfIpIntfCfgAtmArpSrvRegInterval INTEGER, wfIpIntfCfgAtmArpMisc INTEGER, wfIpIntfCfgAtmArpMisc2 INTEGER, wfIpIntfCfgAtmArpSrvConnState INTEGER, wfIpIntfCfgTrEsArpType INTEGER } wfIpIntfCfgCreate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP interface." DEFVAL { create } ::= { wfIpIntfCfgEntry 1 } wfIpIntfCfgEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP interface." DEFVAL { enabled } ::= { wfIpIntfCfgEntry 2 } wfIpIntfCfgState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), invalid(4), notpres(5) } ACCESS read-only STATUS mandatory DESCRIPTION "INvalid indicates an error in processing the cfg record" DEFVAL { notpres } ::= { wfIpIntfCfgEntry 3 } wfIpIntfCfgAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address to which this entry's addressing information pertains" ::= { wfIpIntfCfgEntry 4 } wfIpIntfCfgCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Circuit Number that this interface runs over" ::= { wfIpIntfCfgEntry 5 } wfIpIntfCfgMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { wfIpIntfCfgEntry 6 } wfIpIntfCfgCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Cost metric associated with the IP Address of this entry " DEFVAL { 1 } ::= { wfIpIntfCfgEntry 7 } wfIpIntfCfgCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The user can specifcy a broadcast address for a NWIF" ::= { wfIpIntfCfgEntry 8 } wfIpIntfCfgBcastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The value of the broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. This is value used by the software" ::= { wfIpIntfCfgEntry 9 } wfIpIntfCfgCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The desired mac set by the user" ::= { wfIpIntfCfgEntry 10 } wfIpIntfCfgMacAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address for this Interface- actual one used" ::= { wfIpIntfCfgEntry 11 } wfIpIntfCfgMTUDiscovery OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether MTU discovery option is on/off" DEFVAL { off } ::= { wfIpIntfCfgEntry 12 } wfIpIntfCfgAMR OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether Address Mask Reply is ON/OFF" DEFVAL { off } ::= { wfIpIntfCfgEntry 13 } wfIpIntfCfgASB OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether All-Subnet Broadcasts Are excepted and Sent out this NWIF" DEFVAL { off } ::= { wfIpIntfCfgEntry 14 } wfIpIntfCfgAddressResolutionType OBJECT-TYPE SYNTAX INTEGER { arp(1), ddn(3), pdn(4), in-arp(5), arp-in-arp(6), none(7), bfe-ddn(8), probe(9), arp-probe(10), atm-arp(11) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates which Address Resolution Type to use" DEFVAL { arp } ::= { wfIpIntfCfgEntry 15 } wfIpIntfCfgProxy OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Whether Proxy is on this Interface or not" DEFVAL { off } ::= { wfIpIntfCfgEntry 16 } wfIpIntfCfgHostCache OBJECT-TYPE SYNTAX INTEGER { cache-off(1), cache-120(120), cache-180(180), cache-240(240), cache-300(300), cache-600(600), cache-900(900), cache-1200(1200) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the Host Cache (Address Aging) is on or not. A Range of discrete values is specified as well as a value meaning don't age" DEFVAL { cache-off } ::= { wfIpIntfCfgEntry 17 } wfIpIntfCfgUdpXsumOn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to turn UDP checksum verification on for UDP packets recieved and transmitted by this router" DEFVAL { on } ::= { wfIpIntfCfgEntry 18 } wfIpIntfCfgTrEndStation OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Use Source Routing over token ring selection. Only applies if pam type is TRING." DEFVAL { off } ::= { wfIpIntfCfgEntry 19 } wfIpIntfCfgSMDSGroupAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The SMDS group address" ::= { wfIpIntfCfgEntry 20 } wfIpIntfCfgSMDSArpReqAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The SMDS arp req address" ::= { wfIpIntfCfgEntry 21 } wfIpIntfCfgFRBcastDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay broadcast dlci" ::= { wfIpIntfCfgEntry 22 } wfIpIntfCfgFRMcast1Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay multicast dlci #1" ::= { wfIpIntfCfgEntry 23 } wfIpIntfCfgFRMcast2Dlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frame Relay multicast dlci #2" ::= { wfIpIntfCfgEntry 24 } wfIpIntfCfgRedirect OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates Whether we're sending out redirects on this Interface or not" DEFVAL { on } ::= { wfIpIntfCfgEntry 25 } wfIpIntfCfgEnetArpEncaps OBJECT-TYPE SYNTAX INTEGER { enet(1), snap(2), both(3), probelsap(4), probeenet(5), probeboth(6), arpenetprobelsap(7), arpsnapprobelsap(8), arpbothprobelsap(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The data link encapsulation type to use for ARP packets if the the media is ethernet." DEFVAL { enet } ::= { wfIpIntfCfgEntry 26 } wfIpIntfCfgSlotMask OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Slot mask for which slots a circuit-less interface is eligible to run on. The most significant bit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. This is only valid if wfIpInterfaceCircuit is 0." DEFVAL { 4294705152 } ::= { wfIpIntfCfgEntry 27 } wfIpIntfCfgEnableSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables RIPSO on this interface" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 28 } wfIpIntfCfgStripSecurity OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines which packets will have security option removed. This is a bit mask." ::= { wfIpIntfCfgEntry 29 } wfIpIntfCfgRequireOutSecurity OBJECT-TYPE SYNTAX INTEGER { forwarded(1), originated(2), all(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines which types of outbound packets are required to have a security option. This is a bit mask." DEFVAL { all } ::= { wfIpIntfCfgEntry 30 } wfIpIntfCfgRequireInSecurity OBJECT-TYPE SYNTAX INTEGER { yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not incoming packets must have security option. This is a bit mask." ::= { wfIpIntfCfgEntry 31 } wfIpIntfCfgMinLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the minimum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 32 } wfIpIntfCfgMaxLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the maximum level allowed for packets transmitted or received via this interface. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { topsecret } ::= { wfIpIntfCfgEntry 33 } wfIpIntfCfgMustOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that must be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpIntfCfgEntry 34 } wfIpIntfCfgMayOutAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that may be set in packets transmitted via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpIntfCfgEntry 35 } wfIpIntfCfgMustInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that must be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_NONE." ::= { wfIpIntfCfgEntry 36 } wfIpIntfCfgMayInAuthority OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits that may be set in packets received via this interface. This is a bit map. Zero is valid. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values. IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified, the software will default to IP_NWIF_AUTH_ALL." ::= { wfIpIntfCfgEntry 37 } wfIpIntfCfgImplicitLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should an implicit label be associated with any inbound unlabelled datagrams?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 38 } wfIpIntfCfgImplicitAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the implicit label associated with an unlabelled inbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if implicit labelling is enabled (wfIpIntfImplicitLabelEnabled =IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and implicit labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpIntfCfgEntry 39 } wfIpIntfCfgImplicitLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the classification level byte in the implicit label associated with an unlabelled inbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 40 } wfIpIntfCfgDefaultLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should a default label be associated with any not-yet-labelled oubound datagrams?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 41 } wfIpIntfCfgDefaultAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the default label associated with a not-yet-labelled outbound datagram. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if default labelling is enabled (wfIpInterfaceDefaultLabelEnabled = IP_NWIF_LABEL_ENABLED). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and default labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE. " ::= { wfIpIntfCfgEntry 42 } wfIpIntfCfgDefaultLevel OBJECT-TYPE SYNTAX INTEGER { unclassified(171), confidential(150), secret(90), topsecret(61) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the classification level byte to use in the default label associated with a not-yet-labelled outbound datagram. IP_NWIF_LEVEL_UNCLASSIFIED 171 0x000000AB IP_NWIF_LEVEL_CONFIDENTIAL 150 0x00000096 IP_NWIF_LEVEL_SECRET 90 0x0000005A IP_NWIF_LEVEL_TOPSECRET 61 0x0000003D" DEFVAL { unclassified } ::= { wfIpIntfCfgEntry 43 } wfIpIntfCfgErrorLabelEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should an error label be associated with any outbound ICMP error packets?" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 44 } wfIpIntfCfgErrorAuth OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Defines the authority bits in the error label associated with any outbount ICMP error packets. This is a bit map. 'NONE' means that a 3-byte option label (no authority byte) is used. This field only has meaning if error labelling is enabled (wfIpInterfaceError LabelEnabled = IP_NWIF_LABEL_ENABLED ). The octets indicate auth values. Authorities have been defined for the first octet. This is represented by the following 'bit mask' values: IP_NWIF_AUTH_NONE 0 (0x00) IP_NWIF_AUTH_GENSER 128 (0x80) IP_NWIF_AUTH_SIOPESI 64 (0x40) IP_NWIF_AUTH_SCI 32 (0x20) IP_NWIF_AUTH_NSA 16 (0x10) IP_NWIF_AUTH_DOE 8 (0x08) IP_NWIF_AUTH_ALL 248 (0xF8) If no value is specified and error labelling is enabled, the software defaults to IP_NWIF_AUTH_NONE " ::= { wfIpIntfCfgEntry 45 } wfIpIntfCfgFwdCacheSize OBJECT-TYPE SYNTAX INTEGER(64..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of entries allowed in the Forwarding Table at one time. There is a forwarding table per interface." DEFVAL { 128 } ::= { wfIpIntfCfgEntry 46 } wfIpIntfCfgUnnumAsocAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Associated IP address used by unnumbered interfaces when sourcing a packet. Rip also uses this attribute to make decisions about advertising subnets over unnumbered interfaces. Rip will advertise subnets over the unnumbered interface if they have the same mask as the associated address." ::= { wfIpIntfCfgEntry 47 } wfIpIntfCfgUnnumAsocAlt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable the option to automatically assign an alternate unnumbered associated address in the event that the primary associated address interface has gone down" DEFVAL { disabled } ::= { wfIpIntfCfgEntry 48 } wfIpIntfCfgAtmArpMode OBJECT-TYPE SYNTAX INTEGER { client(1), server(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether ATMARP is a client or running as a server" DEFVAL { client } ::= { wfIpIntfCfgEntry 49 } wfIpIntfCfgAtmArpSrvAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The ATMARP server address" ::= { wfIpIntfCfgEntry 50 } wfIpIntfCfgAtmArpSrvVcAgingEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the ATMARP server VC should be aged (for client operation)" DEFVAL { enabled } ::= { wfIpIntfCfgEntry 51 } wfIpIntfCfgAtmArpSrvRegInterval OBJECT-TYPE SYNTAX INTEGER { client-default(900), server-default(1200) } ACCESS read-write STATUS mandatory DESCRIPTION "For client operation, the interval between registration refreshes. For a server. this will be the duration a registration is valid. (in seconds)" DEFVAL { client-default } ::= { wfIpIntfCfgEntry 52 } wfIpIntfCfgAtmArpMisc OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not in use." ::= { wfIpIntfCfgEntry 53 } wfIpIntfCfgAtmArpMisc2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not in use." ::= { wfIpIntfCfgEntry 54 } wfIpIntfCfgAtmArpSrvConnState OBJECT-TYPE SYNTAX INTEGER { init(1), wereserver(2), noservercfg(1028), closednotreg(4), openingnotreg(20), opennotregxxx(36), openfailnotreg(52), closedregingxxx(260), openingregingxxx(276), openreging(292), openfailregingxxx(308), closedreg(516), openingreg(532), openreg(548), openfailreg(564), closedregfail(772), openingregfail(788), openregfailxxx(804), openfailregfail(820), closednotregarp(12), openingnotregarp(28), opennotregarpxxx(44), openfailnotregarp(60), closedregingarpxxx(268), openingregingarpxxx(284), openregingarp(300), openfailregingarpxxx(316), closedregarp(524), openingregarp(540), openregarpxxx(556), openfailregarp(572), closedregfailarp(780), openingregfailarp(796), openregfailarpxxx(812), openfailregfailarp(828) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the connection to the ATMARP server. This field should be interpreted as follows (bit 31 is msb, bit 0 is lsb): bits 0-3 are bits for determining ATMARP initialization, client/server, and if the client has ARP requests to send to the server: 0x001 INIT 0x002 WERESERVER 0x--4 CLIENT 0x--8 HAVEARPTOSEND bits 4-7 represent the state of the VC to the server: 0x-0- CLOSED 0x-1- OPENING 0x-2- OPEN 0x-3- OPENFAILED bits 8-11 represent the state of registration to the server: 0x0-- NOTREGISTERED 0x1-- REGISTERING 0x2-- REGISTERED 0x3-- REGISTRATIONFAILED 0x4-- NOSERVER" DEFVAL { init } ::= { wfIpIntfCfgEntry 55 } wfIpIntfCfgTrEsArpType OBJECT-TYPE SYNTAX INTEGER { ste(1), are(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Token Ring End Station ARP type ARE / STE" DEFVAL { ste } ::= { wfIpIntfCfgEntry 56 } -- -- End of IP.MIB imported variables -- wfSnmp OBJECT IDENTIFIER ::= { wfSnmpGroup 1 } wfSnmpDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enables or disables the SNMP subsystem " DEFVAL { enabled } ::= { wfSnmp 1 } wfSnmpUseLock OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Flag to indicate whether set locking mechanism is enabled or disabled. Set locking permits only one manager to perform SNMP sets to the system at any given time. A genErr will be returned to managers that are locked out. " DEFVAL { enabled } ::= { wfSnmp 2 } wfSnmpLockAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " Address of remote manager that is enforcing the lock. This value is set by the SNMP agent. Remote managers are only allowed to clear it. " ::= { wfSnmp 3 } wfSnmpLockTimeOut OBJECT-TYPE SYNTAX INTEGER { default(2), minimum(1), maximum(60) } ACCESS read-write STATUS mandatory DESCRIPTION " The maximum time (in minutes) a lock can be idle before it is cleared. An idle period is a time interval with no sets from the locking manager. " DEFVAL { default } ::= { wfSnmp 4 } wfSnmpAuth OBJECT-TYPE SYNTAX INTEGER { trivial(1), party(2), proprietary(3) } ACCESS read-only STATUS mandatory DESCRIPTION " The type of authentication used by the agent (set through console interface). " DEFVAL { trivial } ::= { wfSnmp 5 } wfSnmpInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs received by SNMP from transport entity " ::= { wfSnmp 6 } wfSnmpOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs sent by SNMP to transport entity " ::= { wfSnmp 7 } wfSnmpInBadVersions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs requesting unsupported versions " ::= { wfSnmp 8 } wfSnmpInBadCommunityNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs which had an invalid community string " ::= { wfSnmp 9 } wfSnmpInBadCommunityUses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs requesting an operation unsupported by the community " ::= { wfSnmp 10 } wfSnmpInASNParseErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of ASN.1 parsing errors during decoding " ::= { wfSnmp 11 } wfSnmpInBadTypes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs having an unknown PDU type " ::= { wfSnmp 12 } wfSnmpInTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs delivered with ErrorStatus='tooBig' " ::= { wfSnmp 13 } wfSnmpInNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs delivered with ErrorStatus='noSuchName' " ::= { wfSnmp 14 } wfSnmpInBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs delivered with ErrorStatus='badValue' " ::= { wfSnmp 15 } wfSnmpInReadOnlys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs delivered with ErrorStatus='readOnly' " ::= { wfSnmp 16 } wfSnmpInGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs delivered with ErrorStatus='genErr' " ::= { wfSnmp 17 } wfSnmpInTotalReqVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of MIB objects retrieved successfully by the agent " ::= { wfSnmp 18 } wfSnmpInTotalSetVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of MIB objects which have been SET successfully " ::= { wfSnmp 19 } wfSnmpInGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Get-Request PDUS accepted and processed" ::= { wfSnmp 20 } wfSnmpInGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of GetNext-Request PDUS accepted and processed" ::= { wfSnmp 21 } wfSnmpInSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Set-Request PDUS accepted and processed" ::= { wfSnmp 22 } wfSnmpInGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of GetResponse PDUs accepted and processed" ::= { wfSnmp 23 } wfSnmpInTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Trap PDUs accepted and processed" ::= { wfSnmp 24 } wfSnmpOutTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs generated by the agent with ErrorStatus= 'tooBig' " ::= { wfSnmp 25 } wfSnmpOutNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs generated by the agent with ErrorStatus= 'noSuchName' " ::= { wfSnmp 26 } wfSnmpOutBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs generated by the agent with ErrorStatus= 'badValue' " ::= { wfSnmp 27 } wfSnmpOutReadOnlys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs generated by the agent with ErrorStatus= 'readOnly' " ::= { wfSnmp 28 } wfSnmpOutGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of PDUs generated by the agent with ErrorStatus= 'genErr' " ::= { wfSnmp 29 } wfSnmpOutGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Get-Request PDUs generated by the agent " ::= { wfSnmp 30 } wfSnmpOutGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Get-Next-Request PDUs generated by the agent " ::= { wfSnmp 31 } wfSnmpOutSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Set-Request PDUs generated by the agent " ::= { wfSnmp 32 } wfSnmpOutGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Get-Response PDUs generated by the agent " ::= { wfSnmp 33 } wfSnmpOutTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of Trap PDUs generated by the agent " ::= { wfSnmp 34 } wfSnmpEnableAuthTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Idicates whether agent can generate Authentication Failure Traps " DEFVAL { enabled } ::= { wfSnmp 35 } wfSnmpTrapDebug OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS deprecated DESCRIPTION " This attribute controls the specific trap filter for debug messages " DEFVAL { on } ::= { wfSnmp 36 } wfSnmpTrapTrace OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS deprecated DESCRIPTION " This attribute controls the specific trap filter for trace messages " DEFVAL { on } ::= { wfSnmp 37 } wfSnmpTrapInfo OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS deprecated DESCRIPTION " This attribute controls the specific trap filter for informational messages " DEFVAL { off } ::= { wfSnmp 38 } wfSnmpTrapWarn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS deprecated DESCRIPTION " This attribute controls the specific trap filter for warning messages " DEFVAL { off } ::= { wfSnmp 39 } wfSnmpTrapFault OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS deprecated DESCRIPTION " This attribute controls the specific trap filter for fault messages " DEFVAL { off } ::= { wfSnmp 40 } wfSnmpPropEncryption OBJECT-TYPE SYNTAX INTEGER { wflt(1), others(2) } ACCESS read-only STATUS mandatory DESCRIPTION " The encryption algorithm to use in proprietary security " DEFVAL { wflt } ::= { wfSnmp 41 } wfSnmpCommTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSnmpCommEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A table containing valid management communities " ::= { wfSnmpGroup 2 } wfSnmpCommEntry OBJECT-TYPE SYNTAX WfSnmpCommEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Information about a particular community " INDEX { wfSnmpCommIndex } ::= { wfSnmpCommTable 1 } WfSnmpCommEntry ::= SEQUENCE { wfSnmpCommDelete INTEGER, wfSnmpCommIndex INTEGER, wfSnmpCommName DisplayString, wfSnmpCommAccess INTEGER } wfSnmpCommDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A flag to indicate community instance deletion " DEFVAL { created } ::= { wfSnmpCommEntry 1 } wfSnmpCommIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A unique numeric value that has a one to one correspondence with the community name " ::= { wfSnmpCommEntry 2 } wfSnmpCommName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " Community name " ::= { wfSnmpCommEntry 3 } wfSnmpCommAccess OBJECT-TYPE SYNTAX INTEGER { readonly(1), readwrite(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Community access mode " DEFVAL { readonly } ::= { wfSnmpCommEntry 4 } wfSnmpMgrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSnmpMgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A table containing managers and their respective communities " ::= { wfSnmpGroup 3 } wfSnmpMgrEntry OBJECT-TYPE SYNTAX WfSnmpMgrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Information about a manager of a community " INDEX { wfSnmpMgrCommIndex, wfSnmpMgrAddress } ::= { wfSnmpMgrTable 1 } WfSnmpMgrEntry ::= SEQUENCE { wfSnmpMgrDelete INTEGER, wfSnmpMgrCommIndex INTEGER, wfSnmpMgrAddress IpAddress, wfSnmpMgrName DisplayString, wfSnmpMgrTrapPort INTEGER, wfSnmpMgrTraps INTEGER, wfSnmpMgrEncrSeed1 INTEGER, wfSnmpMgrEncrSeed2 INTEGER, wfSnmpMgrEncrSeed3 INTEGER, wfSnmpMgrEncrSeed4 INTEGER, wfSnmpMgrEncrSeed5 INTEGER } wfSnmpMgrDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A flag to indicate manager instance deletion " DEFVAL { created } ::= { wfSnmpMgrEntry 1 } wfSnmpMgrCommIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Associates this manager with a community in the community table " ::= { wfSnmpMgrEntry 2 } wfSnmpMgrAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " IP Address of this manager " ::= { wfSnmpMgrEntry 3 } wfSnmpMgrName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " A name for this manager " ::= { wfSnmpMgrEntry 4 } wfSnmpMgrTrapPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The UDP Port on which this manager is listening for traps " DEFVAL { 162 } ::= { wfSnmpMgrEntry 5 } wfSnmpMgrTraps OBJECT-TYPE SYNTAX INTEGER { none(1), generic(2), specific(4), all(7) } ACCESS read-write STATUS mandatory DESCRIPTION " Allowable trap types to be sent to Manager " DEFVAL { generic } ::= { wfSnmpMgrEntry 6 } wfSnmpMgrEncrSeed1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The encrypted value of the seed counter for application 1 of this manager " ::= { wfSnmpMgrEntry 7 } wfSnmpMgrEncrSeed2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The encrypted value of the seed counter for application 2 of this manager " ::= { wfSnmpMgrEntry 8 } wfSnmpMgrEncrSeed3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The encrypted value of the seed counter for application 3 of this manager " ::= { wfSnmpMgrEntry 9 } wfSnmpMgrEncrSeed4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The encrypted value of the seed counter for application 4 of this manager " ::= { wfSnmpMgrEntry 10 } wfSnmpMgrEncrSeed5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The encrypted value of the seed counter for application 5 of this manager " ::= { wfSnmpMgrEntry 11 } wfSnmpTrapEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSnmpTrapEntityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A table of Entity Trap switches ; indexed by entity number and slot " ::= { wfSnmpGroup 5 } wfSnmpTrapEntityEntry OBJECT-TYPE SYNTAX WfSnmpTrapEntityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An Entity Trap Switch Entry " INDEX { wfSnmpTrapEntityNumber, wfSnmpTrapEntitySlot } ::= { wfSnmpTrapEntityTable 1 } WfSnmpTrapEntityEntry ::= SEQUENCE { wfSnmpTrapEntityDelete INTEGER, wfSnmpTrapEntityDisable INTEGER, wfSnmpTrapEntityNumber INTEGER, wfSnmpTrapEntitySlot INTEGER, wfSnmpTrapEntityName DisplayString, wfSnmpTrapEntityFault INTEGER, wfSnmpTrapEntityWarn INTEGER, wfSnmpTrapEntityInfo INTEGER, wfSnmpTrapEntityTrace INTEGER, wfSnmpTrapEntityDebug INTEGER } wfSnmpTrapEntityDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A flag to indicate entity instance deletion " DEFVAL { created } ::= { wfSnmpTrapEntityEntry 1 } wfSnmpTrapEntityDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable/Disable an entity's traps. " DEFVAL { enabled } ::= { wfSnmpTrapEntityEntry 2 } wfSnmpTrapEntityNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Entity number " ::= { wfSnmpTrapEntityEntry 3 } wfSnmpTrapEntitySlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Slot number " ::= { wfSnmpTrapEntityEntry 4 } wfSnmpTrapEntityName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " Entity Name " ::= { wfSnmpTrapEntityEntry 5 } wfSnmpTrapEntityFault OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This attribute controls the entity's fault messages. A trap will be generated when this is turned ON. " DEFVAL { off } ::= { wfSnmpTrapEntityEntry 6 } wfSnmpTrapEntityWarn OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This attribute controls the entity's warning messages. A trap will be generated when this is turned ON. " DEFVAL { off } ::= { wfSnmpTrapEntityEntry 7 } wfSnmpTrapEntityInfo OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This attribute controls the entity's info messages. A trap will be generated when this is turned ON. " DEFVAL { off } ::= { wfSnmpTrapEntityEntry 8 } wfSnmpTrapEntityTrace OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This attribute controls the entity's info messages. A trap will be generated when this is turned ON. " DEFVAL { off } ::= { wfSnmpTrapEntityEntry 9 } wfSnmpTrapEntityDebug OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This attribute controls the entity's debug messages. A trap will be generated when this is turned ON. " DEFVAL { off } ::= { wfSnmpTrapEntityEntry 10 } wfSnmpTrapEventTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSnmpTrapEventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A table of Event Trap switches ; indexed by entity and event number " ::= { wfSnmpGroup 6 } wfSnmpTrapEventEntry OBJECT-TYPE SYNTAX WfSnmpTrapEventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An Event Trap Switch Entry " INDEX { wfSnmpTrapEventEntity, wfSnmpTrapEventNumber } ::= { wfSnmpTrapEventTable 1 } WfSnmpTrapEventEntry ::= SEQUENCE { wfSnmpTrapEventDelete INTEGER, wfSnmpTrapEventDisable INTEGER, wfSnmpTrapEventEntity INTEGER, wfSnmpTrapEventNumber INTEGER, wfSnmpTrapEventName DisplayString } wfSnmpTrapEventDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Create/Delete a trap event switch. " DEFVAL { created } ::= { wfSnmpTrapEventEntry 1 } wfSnmpTrapEventDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable/Disable trap. " DEFVAL { enabled } ::= { wfSnmpTrapEventEntry 2 } wfSnmpTrapEventEntity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Entity number " ::= { wfSnmpTrapEventEntry 3 } wfSnmpTrapEventNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Event number " ::= { wfSnmpTrapEventEntry 4 } wfSnmpTrapEventName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " Entity name of event " ::= { wfSnmpTrapEventEntry 5 } wfSys OBJECT IDENTIFIER ::= { wfSystem 1 } wfSysDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " A textual description of the entity including full name and version of the system's hardware type, OS, and networking SW " ::= { wfSys 1 } wfSysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION " Provides an unambiguous means for determining the MIB type (old product vs. harpoon MIB). " ::= { wfSys 2 } wfSysUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION " Time in seconds/100 since the last cold start " ::= { wfSys 3 } wfSysContact OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " Contact person for this node and where/how to contact them " ::= { wfSys 4 } wfSysName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " Node's fully qualified domain name or administratively assigned name " ::= { wfSys 5 } wfSysLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " Physical Location of this Node " ::= { wfSys 6 } wfSysServices OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A sum of numbers indicating the set of services the entity offers. For each layer L, add 2**(L - 1). Example: 78 = Layers 2,3,4, and 7. " DEFVAL { 78 } ::= { wfSys 7 } wfSysGmtOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The positive or negative offset from Greenwich Mean Time (GMT). This effectively describes the time zone. " ::= { wfSys 8 } wfSysMibVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The version of the private management information base currently being used by the system software. Format is: xV.RR " ::= { wfSys 9 } wfSysMibRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The revision level of the private management information base currently being used by the system software. " ::= { wfSys 10 } wfTftp OBJECT IDENTIFIER ::= { wfInternet 6 } wfTftpDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enables or Disables TFTP Subsystem " DEFVAL { enabled } ::= { wfTftp 1 } wfTftpDefaultVolume OBJECT-TYPE SYNTAX INTEGER { volume1(1), volume2(2), volume3(3), volume4(4), volume5(5), volume6(6), volume7(7), volume8(8), volume9(9), volume10(10), volume11(11), volume12(12), volume13(13), volumea(65) } ACCESS read-write STATUS mandatory DESCRIPTION " The file system volume number to which transferred files will be written and from which they will be retrieved. The volume number corresponds to the slot number on which the volume resides. On systems with a floppy disk, volumeA(65) should be used. " DEFVAL { volume2 } ::= { wfTftp 2 } wfTftpXfers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of Transfers in Progress " ::= { wfTftp 3 } wfTftpTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " General Retransmission time-out value (seconds) " DEFVAL { 5 } ::= { wfTftp 4 } wfTftpCloseTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Retransmission time-out value for sender of final ACK (seconds)" DEFVAL { 25 } ::= { wfTftp 5 } wfTftpRexmit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Maximum Number of Retransmissions " DEFVAL { 5 } ::= { wfTftp 6 } wfTftpInFiles OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of files Successfully received " ::= { wfTftp 7 } wfTftpOutFiles OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of files Successfully sent " ::= { wfTftp 8 } wfTftpInWRQ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of write requests received " ::= { wfTftp 9 } wfTftpOutWRQ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of write requests sent " ::= { wfTftp 10 } wfTftpInRRQ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of read requests received " ::= { wfTftp 11 } wfTftpOutRRQ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of read requests sent " ::= { wfTftp 12 } wfTftpRexmitPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of Re-transmitted packets " ::= { wfTftp 13 } wfTftpInErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of Error PDUs Received " ::= { wfTftp 14 } wfTftpOutErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of Error PDUs Sent " ::= { wfTftp 15 } wfTftpAborts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of Aborted Pseudo Connections " ::= { wfTftp 16 } wfTiRui OBJECT IDENTIFIER ::= { wfServices 2 } wfTiRuiState OBJECT-TYPE SYNTAX INTEGER { idle(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION " The state of the ti rui command processor. Idle is normal state. Busy indicates a command is being processed. " DEFVAL { idle } ::= { wfTiRui 1 } wfTiRuiAction OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " Ti command request string " ::= { wfTiRui 2 } wfTiRuiResult OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The result of the Ti command requst " ::= { wfTiRui 3 } wfTiRuiInReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of command requests " ::= { wfTiRui 4 } wfTiRuiOutResults OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of command requests that processed without error " ::= { wfTiRui 5 } wfTiRuiOutResultsErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Total number of command requests that could not be processed because of errors " ::= { wfTiRui 6 } END